From 71775d3b54780f1901ff6eac7c5ae05676938107 Mon Sep 17 00:00:00 2001 From: Jerry Huang Date: Thu, 3 Nov 2011 15:18:06 +0800 Subject: [PATCH] powerpc/mpc85xx: Set SYSCLK to the required frequency For ICS307-02, there is one general expression to generate SYSCLK: CLK1Frequency = InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD) If we want the required frequency for SYSCLK, we must find one solution to generate this frequency, this solution includes VDW, RDW and OD. For OD, there are only eight option value: 10, 2, 8, 4, 5, 7, 3, 6. For RDW, the range is 1 to 127. For VDW, the range is 4 to 511. First, we use one OD, RDW and required SYSCLK to calculate the VDW, if VDW is in it's range, we will calculate the CLK1Frequency with the OD, RDW and VDW calculated, and we will check this percent (CLK1Frequency / required SYSCLK), and the precision is 1/1000. if the percent is less than 1/1000, we think the CLK1Frequency is we want. Otherwise, We will continue to calculate it with the next OD and RDW. Signed-off-by: Jerry Huang Signed-off-by: Kumar Gala --- board/freescale/common/ics307_clk.c | 69 +++++++++++++++++++++++++++++ board/freescale/common/ics307_clk.h | 4 +- board/freescale/common/ngpixis.c | 27 +++++++++++ 3 files changed, 99 insertions(+), 1 deletion(-) diff --git a/board/freescale/common/ics307_clk.c b/board/freescale/common/ics307_clk.c index 89d8810f74..6acbc361a3 100644 --- a/board/freescale/common/ics307_clk.c +++ b/board/freescale/common/ics307_clk.c @@ -31,11 +31,80 @@ #include "pixis.h" #endif +/* define for SYS CLK or CLK1Frequency */ +#define TTL 1 +#define CLK2 0 +#define CRYSTAL 0 +#define MAX_VDW (511 + 8) +#define MAX_RDW (127 + 2) +#define MIN_VDW (4 + 8) +#define MIN_RDW (1 + 2) +#define NUM_OD_SETTING 8 +/* + * These defines cover the industrial temperature range part, + * for commercial, change below to 400000 and 55000, respectively + */ +#define MAX_VCO 360000 +#define MIN_VCO 60000 + /* decode S[0-2] to Output Divider (OD) */ static u8 ics307_s_to_od[] = { 10, 2, 8, 4, 5, 7, 3, 6 }; +/* + * Find one solution to generate required frequency for SYSCLK + * out_freq: KHz, required frequency to the SYSCLK + * the result will be retuned with component RDW, VDW, OD, TTL, + * CLK2 and crystal + */ +unsigned long ics307_sysclk_calculator(unsigned long out_freq) +{ + const unsigned long input_freq = CONFIG_ICS307_REFCLK_HZ; + unsigned long vdw, rdw, odp, s_vdw = 0, s_rdw = 0, s_odp = 0, od; + unsigned long tmp_out, diff, result = 0; + int found = 0; + + for (odp = 0; odp < NUM_OD_SETTING; odp++) { + od = ics307_s_to_od[odp]; + if (od * out_freq < MIN_VCO || od * out_freq > MAX_VCO) + continue; + for (rdw = MIN_RDW; rdw <= MAX_RDW; rdw++) { + /* Calculate the VDW */ + vdw = out_freq * 1000 * od * rdw / (input_freq * 2); + if (vdw > MAX_VDW) + vdw = MAX_VDW; + if (vdw < MIN_VDW) + continue; + /* Calculate the temp out frequency */ + tmp_out = input_freq * 2 * vdw / (rdw * od * 1000); + diff = MAX(out_freq, tmp_out) - MIN(out_freq, tmp_out); + /* + * calculate the percent, the precision is 1/1000 + * If greater than 1/1000, continue + * otherwise, we think the solution is we required + */ + if (diff * 1000 / out_freq > 1) + continue; + else { + s_vdw = vdw; + s_rdw = rdw; + s_odp = odp; + found = 1; + break; + } + } + } + + if (found) + result = (s_rdw - 2) | (s_vdw - 8) << 7 | s_odp << 16 | + CLK2 << 19 | TTL << 21 | CRYSTAL << 22; + + debug("ICS307-02: RDW: %ld, VDW: %ld, OD: %d\n", s_rdw - 2, s_vdw - 8, + ics307_s_to_od[s_odp]); + return result; +} + /* * Calculate frequency being generated by ICS307-02 clock chip based upon * the control bytes being programmed into it. diff --git a/board/freescale/common/ics307_clk.h b/board/freescale/common/ics307_clk.h index db3dbc41f7..37579124bc 100644 --- a/board/freescale/common/ics307_clk.h +++ b/board/freescale/common/ics307_clk.h @@ -1,5 +1,5 @@ /* - * Copyright 2010 Freescale Semiconductor, Inc. + * Copyright 2010-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -23,8 +23,10 @@ #define __ICS_CLK_H_ 1 #ifndef __ASSEMBLY__ + extern unsigned long get_board_sys_clk(void); extern unsigned long get_board_ddr_clk(void); +extern unsigned long ics307_sysclk_calculator(unsigned long out_freq); #endif #endif /* __ICS_CLK_H_ */ diff --git a/board/freescale/common/ngpixis.c b/board/freescale/common/ngpixis.c index 765f0359bf..276ae3c5cf 100644 --- a/board/freescale/common/ngpixis.c +++ b/board/freescale/common/ngpixis.c @@ -156,9 +156,29 @@ static void pixis_dump_regs(void) } #endif +void pixis_sysclk_set(unsigned long sysclk) +{ + unsigned long freq_word; + u8 sclk0, sclk1, sclk2; + + freq_word = ics307_sysclk_calculator(sysclk); + sclk2 = freq_word & 0xff; + sclk1 = (freq_word >> 8) & 0xff; + sclk0 = (freq_word >> 16) & 0xff; + + /* set SYSCLK enable bit */ + PIXIS_WRITE(vcfgen0, 0x01); + + /* SYSCLK to required frequency */ + PIXIS_WRITE(sclk[0], sclk0); + PIXIS_WRITE(sclk[1], sclk1); + PIXIS_WRITE(sclk[2], sclk2); +} + int pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { unsigned int i; + unsigned long sysclk; char *p_altbank = NULL; #ifdef DEBUG char *p_dump = NULL; @@ -182,6 +202,12 @@ int pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) continue; } #endif + if (strcmp(argv[i], "sysclk") == 0) { + sysclk = simple_strtoul(argv[i + 1], NULL, 0); + i += 1; + pixis_sysclk_set(sysclk); + continue; + } unknown_param = argv[i]; } @@ -219,4 +245,5 @@ U_BOOT_CMD( #ifdef DEBUG "pixis_reset dump - display the PIXIS registers\n" #endif + "pixis_reset sysclk - reset with SYSCLK frequency(KHz)\n" ); -- 2.39.5