From 723dfe8f020cc5786baadb5f91f3efacc03165bf Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 13 Oct 2017 10:27:26 -0300 Subject: [PATCH] mx6slevk: Fix MMC breakage for the SPL target Commit 001cdbbb32ef1f6 ("imx: mx6slevk: enable more DM drivers") breaks MMC support in U-Boot proper on the mx6slevk_spl_defconfig target: U-Boot SPL 2017.09-00396-g6ca43a5 (Oct 01 2017 - 16:20:18) Trying to boot from MMC1 U-Boot 2017.09-00396-g6ca43a5 (Oct 01 2017 - 16:20:18 -0300) CPU: Freescale i.MX6SL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 33C Reset cause: POR Board: MX6SLEVK I2C: ready DRAM: 1 GiB MMC: FSL_SDHC: 0 MMC Device 1 not found *** Warning - No MMC card found, using default environment As mx6slevk_spl_defconfig does not use CONFIG_DM_MMC and its board file does not register the mmc controller for U-Boot proper, let's fix this by adding CONFIG_DM_MMC=y and device tree support. While at it, add more DM drivers, so that it becomes closer to mx6slevk_defconfig. Signed-off-by: Fabio Estevam --- configs/mx6slevk_spl_defconfig | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/configs/mx6slevk_spl_defconfig b/configs/mx6slevk_spl_defconfig index 689fe794ed..05a5c9e2a4 100644 --- a/configs/mx6slevk_spl_defconfig +++ b/configs/mx6slevk_spl_defconfig @@ -9,7 +9,8 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y # CONFIG_CMD_BMODE is not set -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6SL,SYS_I2C" +CONFIG_DEFAULT_DEVICE_TREE="imx6sl-evk" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6SL" CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y @@ -32,13 +33,26 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_MMC=y CONFIG_DM=y +CONFIG_DM_GPIO=y +CONFIG_DM_I2C=y +CONFIG_DM_MMC=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHYLIB=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y +CONFIG_DM_PMIC=y +CONFIG_DM_PMIC_PFUZE100=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_PFUZE100=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y CONFIG_DM_THERMAL=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_STORAGE=y CONFIG_USB_HOST_ETHER=y CONFIG_USB_ETHER_ASIX=y -- 2.39.5