From 72c3464be42088dc75245cf2fcc8f5c6e6959b4b Mon Sep 17 00:00:00 2001 From: Tomas Vanek Date: Thu, 5 Nov 2015 21:05:43 +0100 Subject: [PATCH] jtag: cmsis-dap: Issue disconnect before reconnecting cmsis-dap protocol has both DAP_Connect and DAP_Disconnect commands. Logically if cmsis_dap_swd_switch_seq() calls DAP_Connect in connected state it should call DAP_Disconnect first. Doing so surprisingly solves problems on Atmel EDBG with target SAMD/R/L/C. Without this change SWD communication breaks after reset run/halt in config "reset_config srst_only" and reconnect trials repeatedly fail with "SWD ack not OK: 0 JUNK" Change-Id: Ie951098d5e0c83f388e2df414608aaabec2135c9 Signed-off-by: Tomas Vanek Reviewed-on: http://openocd.zylin.com/3098 Tested-by: jenkins Reviewed-by: Spencer Oliver --- src/jtag/drivers/cmsis_dap_usb.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/src/jtag/drivers/cmsis_dap_usb.c b/src/jtag/drivers/cmsis_dap_usb.c index 38828ea0..b3b91435 100644 --- a/src/jtag/drivers/cmsis_dap_usb.c +++ b/src/jtag/drivers/cmsis_dap_usb.c @@ -714,6 +714,9 @@ static int cmsis_dap_swd_switch_seq(struct adiv5_dap *dap, enum swd_special_seq unsigned int s_len; int retval; + /* First disconnect before connecting, Atmel EDBG needs it for SAMD/R/L/C */ + cmsis_dap_cmd_DAP_Disconnect(); + /* When we are reconnecting, DAP_Connect needs to be rerun, at * least on Keil ULINK-ME */ retval = cmsis_dap_cmd_DAP_Connect(seq == LINE_RESET || seq == JTAG_TO_SWD ? -- 2.39.5