From 74236acacc27168102b2e3fbcac3a80e5ed82fe4 Mon Sep 17 00:00:00 2001 From: Aneesh V Date: Thu, 8 Mar 2012 07:20:18 +0000 Subject: [PATCH] armv7: add appropriate headers for assembly functions Use ENTRY and ENDPROC with assembly functions to ensure necessary assembler directives for all functions. Signed-off-by: Aneesh V Acked-by: Mike Frysinger --- arch/arm/cpu/armv7/mx5/lowlevel_init.S | 5 ++- arch/arm/cpu/armv7/mx6/lowlevel_init.S | 5 ++- .../arm/cpu/armv7/omap-common/lowlevel_init.S | 14 +++---- arch/arm/cpu/armv7/omap3/lowlevel_init.S | 41 ++++++++++--------- arch/arm/cpu/armv7/s5pc1xx/cache.S | 10 +++-- arch/arm/cpu/armv7/s5pc1xx/reset.S | 5 ++- arch/arm/cpu/armv7/start.S | 13 +++--- arch/arm/cpu/armv7/tegra2/lowlevel_init.S | 5 ++- arch/arm/cpu/armv7/u8500/lowlevel.S | 9 ++-- 9 files changed, 58 insertions(+), 49 deletions(-) diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S index 74ab753a4a..683a7b53af 100644 --- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S +++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S @@ -22,6 +22,7 @@ #include #include #include +#include /* * L2CC Cache setup/invalidation/disable @@ -326,8 +327,7 @@ .section ".text.init", "x" -.globl lowlevel_init -lowlevel_init: +ENTRY(lowlevel_init) #if defined(CONFIG_MX51) ldr r0, =GPIO1_BASE_ADDR ldr r1, [r0, #0x0] @@ -348,6 +348,7 @@ lowlevel_init: /* r12 saved upper lr*/ mov pc,lr +ENDPROC(lowlevel_init) /* Board level setting value */ W_DP_OP_864: .word DP_OP_864 diff --git a/arch/arm/cpu/armv7/mx6/lowlevel_init.S b/arch/arm/cpu/armv7/mx6/lowlevel_init.S index 1864356d0b..acadef221c 100644 --- a/arch/arm/cpu/armv7/mx6/lowlevel_init.S +++ b/arch/arm/cpu/armv7/mx6/lowlevel_init.S @@ -18,7 +18,8 @@ */ .section ".text.init", "x" -.globl lowlevel_init -lowlevel_init: +#include +ENTRY(lowlevel_init) mov pc, lr +ENDPROC(lowlevel_init) diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S index 35f38acf5d..ccc6bb6b85 100644 --- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S @@ -27,9 +27,9 @@ */ #include +#include -.global save_boot_params -save_boot_params: +ENTRY(save_boot_params) /* * See if the rom code passed pointer is valid: * It is not valid if it is not in non-secure SRAM @@ -76,10 +76,9 @@ save_boot_params: strb r2, [r3, #CH_FLAGS_OFFSET] 1: bx lr +ENDPROC(save_boot_params) - -.globl lowlevel_init -lowlevel_init: +ENTRY(lowlevel_init) /* * Setup a temporary stack */ @@ -95,12 +94,13 @@ lowlevel_init: */ bl s_init pop {ip, pc} +ENDPROC(lowlevel_init) -.globl set_pl310_ctrl_reg -set_pl310_ctrl_reg: +ENTRY(set_pl310_ctrl_reg) PUSH {r4-r11, lr} @ save registers - ROM code may pollute @ our registers LDR r12, =0x102 @ Set PL310 control register - value in R0 .word 0xe1600070 @ SMC #0 - hand assembled because -march=armv5 @ call ROM Code API to set control register POP {r4-r11, pc} +ENDPROC(set_pl310_ctrl_reg) diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S index c42c5ddcc9..ebf69fa17d 100644 --- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S @@ -31,22 +31,22 @@ #include #include #include +#include _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */ #ifdef CONFIG_SPL_BUILD -.global save_boot_params -save_boot_params: +ENTRY(save_boot_params) ldr r4, =omap3_boot_device ldr r5, [r0, #0x4] and r5, r5, #0xff str r5, [r4] bx lr +ENDPROC(save_boot_params) #endif -.global omap3_gp_romcode_call -omap3_gp_romcode_call: +ENTRY(omap3_gp_romcode_call) PUSH {r4-r12, lr} @ Save all registers from ROM code! MOV r12, r0 @ Copy the Service ID in R12 MOV r0, r1 @ Copy parameter to R0 @@ -55,6 +55,7 @@ omap3_gp_romcode_call: .word 0xe1600070 @ SMC #0 to enter monitor - hand assembled @ because we use -march=armv5 POP {r4-r12, pc} +ENDPROC(omap3_gp_romcode_call) /* * Funtion for making PPA HAL API calls in secure devices @@ -62,8 +63,7 @@ omap3_gp_romcode_call: * R0 - Service ID * R1 - paramer list */ -.global do_omap3_emu_romcode_call -do_omap3_emu_romcode_call: +ENTRY(do_omap3_emu_romcode_call) PUSH {r4-r12, lr} @ Save all registers from ROM code! MOV r12, r0 @ Copy the Secure Service ID in R12 MOV r3, r1 @ Copy the pointer to va_list in R3 @@ -76,14 +76,14 @@ do_omap3_emu_romcode_call: .word 0xe1600071 @ SMC #1 to call PPA service - hand assembled @ because we use -march=armv5 POP {r4-r12, pc} +ENDPROC(do_omap3_emu_romcode_call) #if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_NAND_BOOT) /************************************************************************** * cpy_clk_code: relocates clock code into SRAM where its safer to execute * R1 = SRAM destination address. *************************************************************************/ -.global cpy_clk_code - cpy_clk_code: +ENTRY(cpy_clk_code) /* Copy DPLL code into SRAM */ adr r0, go_to_speed /* get addr of clock setting code */ mov r2, #384 /* r2 size to copy (div by 32 bytes) */ @@ -95,6 +95,7 @@ next2: cmp r0, r2 /* until source end address [r2] */ bne next2 mov pc, lr /* back to caller */ +ENDPROC(cpy_clk_code) /* *************************************************************************** * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed @@ -109,8 +110,7 @@ next2: * L3 when its not in self refresh seems bad for it. Normally, this * code runs from flash before SDR is init so that should be ok. ****************************************************************************/ -.global go_to_speed - go_to_speed: +ENTRY(go_to_speed) stmfd sp!, {r4 - r6} /* move into fast relock bypass */ @@ -171,6 +171,7 @@ wait2: nop ldmfd sp!, {r4 - r6} mov pc, lr /* back to caller, locked */ +ENDPROC(go_to_speed) _go_to_speed: .word go_to_speed @@ -211,8 +212,7 @@ pll_div_val5: #endif -.globl lowlevel_init -lowlevel_init: +ENTRY(lowlevel_init) ldr sp, SRAM_STACK str ip, [sp] /* stash old link register */ mov ip, lr /* save link reg across call */ @@ -230,6 +230,7 @@ lowlevel_init: /* back to arch calling code */ mov pc, lr +ENDPROC(lowlevel_init) /* the literal pools origin */ .ltorg @@ -480,22 +481,22 @@ per_36x_dpll_param: .word 26000, 432, 12, 9, 16, 9, 4, 3, 1 .word 38400, 360, 15, 9, 16, 5, 4, 3, 1 -.globl get_36x_mpu_dpll_param -get_36x_mpu_dpll_param: +ENTRY(get_36x_mpu_dpll_param) adr r0, mpu_36x_dpll_param mov pc, lr +ENDPROC(get_36x_mpu_dpll_param) -.globl get_36x_iva_dpll_param -get_36x_iva_dpll_param: +ENTRY(get_36x_iva_dpll_param) adr r0, iva_36x_dpll_param mov pc, lr +ENDPROC(get_36x_iva_dpll_param) -.globl get_36x_core_dpll_param -get_36x_core_dpll_param: +ENTRY(get_36x_core_dpll_param) adr r0, core_36x_dpll_param mov pc, lr +ENDPROC(get_36x_core_dpll_param) -.globl get_36x_per_dpll_param -get_36x_per_dpll_param: +ENTRY(get_36x_per_dpll_param) adr r0, per_36x_dpll_param mov pc, lr +ENDPROC(get_36x_per_dpll_param) diff --git a/arch/arm/cpu/armv7/s5pc1xx/cache.S b/arch/arm/cpu/armv7/s5pc1xx/cache.S index c7d62212bd..000192c254 100644 --- a/arch/arm/cpu/armv7/s5pc1xx/cache.S +++ b/arch/arm/cpu/armv7/s5pc1xx/cache.S @@ -25,20 +25,22 @@ .align 5 +#include + #ifndef CONFIG_SYS_L2CACHE_OFF -.global v7_outer_cache_enable -v7_outer_cache_enable: +ENTRY(v7_outer_cache_enable) push {r0, r1, r2, lr} mrc 15, 0, r3, cr1, cr0, 1 orr r3, r3, #2 mcr 15, 0, r3, cr1, cr0, 1 pop {r1, r2, r3, pc} +ENDPROC(v7_outer_cache_enable) -.global v7_outer_cache_disable -v7_outer_cache_disable: +ENTRY(v7_outer_cache_disable) push {r0, r1, r2, lr} mrc 15, 0, r3, cr1, cr0, 1 bic r3, r3, #2 mcr 15, 0, r3, cr1, cr0, 1 pop {r1, r2, r3, pc} +ENDPROC(v7_outer_cache_disable) #endif diff --git a/arch/arm/cpu/armv7/s5pc1xx/reset.S b/arch/arm/cpu/armv7/s5pc1xx/reset.S index 70fa146cf3..c7a41d03d2 100644 --- a/arch/arm/cpu/armv7/s5pc1xx/reset.S +++ b/arch/arm/cpu/armv7/s5pc1xx/reset.S @@ -22,12 +22,12 @@ */ #include +#include #define S5PC100_SWRESET 0xE0200000 #define S5PC110_SWRESET 0xE0102000 -.globl reset_cpu -reset_cpu: +ENTRY(reset_cpu) ldr r1, =S5PC100_PRO_ID ldr r2, [r1] ldr r4, =0x00010000 @@ -45,3 +45,4 @@ reset_cpu: str r2, [r1] _loop_forever: b _loop_forever +ENDPROC(reset_cpu) diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index ef08a55abc..261835b6c6 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -33,6 +33,7 @@ #include #include #include +#include .globl _start _start: b reset @@ -172,8 +173,7 @@ call_board_init_f: * after relocating the monitor code. * */ - .globl relocate_code -relocate_code: +ENTRY(relocate_code) mov r4, r0 /* save addr_sp */ mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ @@ -289,6 +289,7 @@ jump_2_ram: _board_init_r_ofs: .word board_init_r - _start +ENDPROC(relocate_code) /************************************************************************* * @@ -298,8 +299,7 @@ _board_init_r_ofs: * CONFIG_SYS_ICACHE_OFF is defined. * *************************************************************************/ -.globl cpu_init_cp15 -cpu_init_cp15: +ENTRY(cpu_init_cp15) /* * Invalidate L1 I/D */ @@ -325,7 +325,7 @@ cpu_init_cp15: #endif mcr p15, 0, r0, c1, c0, 0 mov pc, lr @ back to my caller - +ENDPROC(cpu_init_cp15) #ifndef CONFIG_SKIP_LOWLEVEL_INIT /************************************************************************* @@ -336,7 +336,7 @@ cpu_init_cp15: * setup memory timing * *************************************************************************/ -cpu_init_crit: +ENTRY(cpu_init_crit) /* * Jump to board specific initialization... * The Mask ROM will have already initialized @@ -347,6 +347,7 @@ cpu_init_crit: bl lowlevel_init @ go setup pll,mux,memory mov lr, ip @ restore link mov pc, lr @ back to my caller +ENDPROC(cpu_init_crit) #endif #ifndef CONFIG_SPL_BUILD diff --git a/arch/arm/cpu/armv7/tegra2/lowlevel_init.S b/arch/arm/cpu/armv7/tegra2/lowlevel_init.S index 6b866476ce..d117f23a62 100644 --- a/arch/arm/cpu/armv7/tegra2/lowlevel_init.S +++ b/arch/arm/cpu/armv7/tegra2/lowlevel_init.S @@ -25,10 +25,10 @@ #include #include +#include .align 5 -.global reset_cpu -reset_cpu: +ENTRY(reset_cpu) ldr r1, rstctl @ get addr for global reset @ reg ldr r3, [r1] @@ -39,3 +39,4 @@ _loop_forever: b _loop_forever rstctl: .word PRM_RSTCTRL +ENDPROC(reset_cpu) diff --git a/arch/arm/cpu/armv7/u8500/lowlevel.S b/arch/arm/cpu/armv7/u8500/lowlevel.S index cffdfd1381..289cfb0779 100644 --- a/arch/arm/cpu/armv7/u8500/lowlevel.S +++ b/arch/arm/cpu/armv7/u8500/lowlevel.S @@ -20,16 +20,17 @@ */ #include +#include -.globl lowlevel_init -lowlevel_init: +ENTRY(lowlevel_init) mov pc, lr +ENDPROC(lowlevel_init) .align 5 -.globl reset_cpu -reset_cpu: +ENTRY(reset_cpu) ldr r0, =CFG_PRCMU_BASE ldr r1, =0x1 str r1, [r0, #0x228] _loop_forever: b _loop_forever +ENDPROC(reset_cpu) -- 2.39.5