From 743d48151d2df4215b90310dc422db84d45e8002 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 23 Jan 2015 00:24:16 +0900 Subject: [PATCH] powerpc: mpc85xx: remove P1_P2_RDB boards These boards are still non-generic boards: P1011RDB, P1022RDB, P2010RDB, P2020RDB Signed-off-by: Masahiro Yamada Cc: Poonam Aggrwal --- arch/powerpc/cpu/mpc85xx/Kconfig | 6 - board/freescale/p1_p2_rdb/Kconfig | 12 - board/freescale/p1_p2_rdb/MAINTAINERS | 37 - board/freescale/p1_p2_rdb/Makefile | 30 - board/freescale/p1_p2_rdb/README | 145 ---- board/freescale/p1_p2_rdb/ddr.c | 221 ------ board/freescale/p1_p2_rdb/law.c | 17 - board/freescale/p1_p2_rdb/p1_p2_rdb.c | 303 -------- board/freescale/p1_p2_rdb/pci.c | 27 - board/freescale/p1_p2_rdb/spl.c | 141 ---- board/freescale/p1_p2_rdb/spl_minimal.c | 84 --- board/freescale/p1_p2_rdb/tlb.c | 91 --- configs/P1011RDB_36BIT_SDCARD_defconfig | 5 - configs/P1011RDB_36BIT_SPIFLASH_defconfig | 5 - configs/P1011RDB_36BIT_defconfig | 4 - configs/P1011RDB_NAND_defconfig | 6 - configs/P1011RDB_SDCARD_defconfig | 5 - configs/P1011RDB_SPIFLASH_defconfig | 5 - configs/P1011RDB_defconfig | 4 - configs/P1020RDB_36BIT_SDCARD_defconfig | 5 - configs/P1020RDB_36BIT_SPIFLASH_defconfig | 5 - configs/P1020RDB_36BIT_defconfig | 4 - configs/P1020RDB_NAND_defconfig | 6 - configs/P1020RDB_SDCARD_defconfig | 5 - configs/P1020RDB_SPIFLASH_defconfig | 5 - configs/P1020RDB_defconfig | 4 - configs/P2010RDB_36BIT_SDCARD_defconfig | 5 - configs/P2010RDB_36BIT_SPIFLASH_defconfig | 5 - configs/P2010RDB_36BIT_defconfig | 4 - configs/P2010RDB_NAND_defconfig | 6 - configs/P2010RDB_SDCARD_defconfig | 5 - configs/P2010RDB_SPIFLASH_defconfig | 5 - configs/P2010RDB_defconfig | 4 - configs/P2020RDB_36BIT_SDCARD_defconfig | 5 - configs/P2020RDB_36BIT_SPIFLASH_defconfig | 5 - configs/P2020RDB_36BIT_defconfig | 4 - configs/P2020RDB_NAND_defconfig | 6 - configs/P2020RDB_SDCARD_defconfig | 5 - configs/P2020RDB_SPIFLASH_defconfig | 5 - configs/P2020RDB_defconfig | 4 - doc/README.scrapyard | 4 + include/configs/P1_P2_RDB.h | 808 ---------------------- 42 files changed, 4 insertions(+), 2058 deletions(-) delete mode 100644 board/freescale/p1_p2_rdb/Kconfig delete mode 100644 board/freescale/p1_p2_rdb/MAINTAINERS delete mode 100644 board/freescale/p1_p2_rdb/Makefile delete mode 100644 board/freescale/p1_p2_rdb/README delete mode 100644 board/freescale/p1_p2_rdb/ddr.c delete mode 100644 board/freescale/p1_p2_rdb/law.c delete mode 100644 board/freescale/p1_p2_rdb/p1_p2_rdb.c delete mode 100644 board/freescale/p1_p2_rdb/pci.c delete mode 100644 board/freescale/p1_p2_rdb/spl.c delete mode 100644 board/freescale/p1_p2_rdb/spl_minimal.c delete mode 100644 board/freescale/p1_p2_rdb/tlb.c delete mode 100644 configs/P1011RDB_36BIT_SDCARD_defconfig delete mode 100644 configs/P1011RDB_36BIT_SPIFLASH_defconfig delete mode 100644 configs/P1011RDB_36BIT_defconfig delete mode 100644 configs/P1011RDB_NAND_defconfig delete mode 100644 configs/P1011RDB_SDCARD_defconfig delete mode 100644 configs/P1011RDB_SPIFLASH_defconfig delete mode 100644 configs/P1011RDB_defconfig delete mode 100644 configs/P1020RDB_36BIT_SDCARD_defconfig delete mode 100644 configs/P1020RDB_36BIT_SPIFLASH_defconfig delete mode 100644 configs/P1020RDB_36BIT_defconfig delete mode 100644 configs/P1020RDB_NAND_defconfig delete mode 100644 configs/P1020RDB_SDCARD_defconfig delete mode 100644 configs/P1020RDB_SPIFLASH_defconfig delete mode 100644 configs/P1020RDB_defconfig delete mode 100644 configs/P2010RDB_36BIT_SDCARD_defconfig delete mode 100644 configs/P2010RDB_36BIT_SPIFLASH_defconfig delete mode 100644 configs/P2010RDB_36BIT_defconfig delete mode 100644 configs/P2010RDB_NAND_defconfig delete mode 100644 configs/P2010RDB_SDCARD_defconfig delete mode 100644 configs/P2010RDB_SPIFLASH_defconfig delete mode 100644 configs/P2010RDB_defconfig delete mode 100644 configs/P2020RDB_36BIT_SDCARD_defconfig delete mode 100644 configs/P2020RDB_36BIT_SPIFLASH_defconfig delete mode 100644 configs/P2020RDB_36BIT_defconfig delete mode 100644 configs/P2020RDB_NAND_defconfig delete mode 100644 configs/P2020RDB_SDCARD_defconfig delete mode 100644 configs/P2020RDB_SPIFLASH_defconfig delete mode 100644 configs/P2020RDB_defconfig delete mode 100644 include/configs/P1_P2_RDB.h diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 7501eb4b82..009d830ff2 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -85,11 +85,6 @@ config TARGET_P1022DS config TARGET_P1023RDB bool "Support P1023RDB" -config TARGET_P1_P2_RDB - bool "Support P1_P2_RDB" - select SUPPORT_SPL - select SUPPORT_TPL - config TARGET_P1_P2_RDB_PC bool "Support p1_p2_rdb_pc" select SUPPORT_SPL @@ -184,7 +179,6 @@ source "board/freescale/mpc8572ds/Kconfig" source "board/freescale/p1010rdb/Kconfig" source "board/freescale/p1022ds/Kconfig" source "board/freescale/p1023rdb/Kconfig" -source "board/freescale/p1_p2_rdb/Kconfig" source "board/freescale/p1_p2_rdb_pc/Kconfig" source "board/freescale/p1_twr/Kconfig" source "board/freescale/p2020come/Kconfig" diff --git a/board/freescale/p1_p2_rdb/Kconfig b/board/freescale/p1_p2_rdb/Kconfig deleted file mode 100644 index d7ad35d403..0000000000 --- a/board/freescale/p1_p2_rdb/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_P1_P2_RDB - -config SYS_BOARD - default "p1_p2_rdb" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "P1_P2_RDB" - -endif diff --git a/board/freescale/p1_p2_rdb/MAINTAINERS b/board/freescale/p1_p2_rdb/MAINTAINERS deleted file mode 100644 index aabf587dd6..0000000000 --- a/board/freescale/p1_p2_rdb/MAINTAINERS +++ /dev/null @@ -1,37 +0,0 @@ -P1_P2_RDB BOARD -#M: - -S: Maintained -F: board/freescale/p1_p2_rdb/ -F: include/configs/P1_P2_RDB.h -F: configs/P1011RDB_defconfig -F: configs/P1011RDB_36BIT_defconfig -F: configs/P1011RDB_36BIT_SDCARD_defconfig -F: configs/P1011RDB_36BIT_SPIFLASH_defconfig -F: configs/P1011RDB_NAND_defconfig -F: configs/P1011RDB_SDCARD_defconfig -F: configs/P1011RDB_SPIFLASH_defconfig -F: configs/P1020RDB_defconfig -F: configs/P1020RDB_36BIT_defconfig -F: configs/P1020RDB_36BIT_SDCARD_defconfig -F: configs/P1020RDB_36BIT_SPIFLASH_defconfig -F: configs/P1020RDB_NAND_defconfig -F: configs/P1020RDB_SDCARD_defconfig -F: configs/P1020RDB_SPIFLASH_defconfig -F: configs/P2010RDB_defconfig -F: configs/P2010RDB_36BIT_defconfig -F: configs/P2010RDB_36BIT_SDCARD_defconfig -F: configs/P2010RDB_36BIT_SPIFLASH_defconfig -F: configs/P2010RDB_NAND_defconfig -F: configs/P2010RDB_SDCARD_defconfig -F: configs/P2010RDB_SPIFLASH_defconfig -F: configs/P2020RDB_36BIT_defconfig -F: configs/P2020RDB_36BIT_SDCARD_defconfig -F: configs/P2020RDB_36BIT_SPIFLASH_defconfig -F: configs/P2020RDB_NAND_defconfig -F: configs/P2020RDB_SDCARD_defconfig -F: configs/P2020RDB_SPIFLASH_defconfig - -P2020RDB BOARD -M: Poonam Aggrwal -S: Maintained -F: configs/P2020RDB_defconfig diff --git a/board/freescale/p1_p2_rdb/Makefile b/board/freescale/p1_p2_rdb/Makefile deleted file mode 100644 index a97bf45f00..0000000000 --- a/board/freescale/p1_p2_rdb/Makefile +++ /dev/null @@ -1,30 +0,0 @@ -# -# Copyright 2009 Freescale Semiconductor, Inc. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -MINIMAL= - -ifdef CONFIG_SPL_BUILD -ifdef CONFIG_SPL_INIT_MINIMAL -MINIMAL=y -endif -endif - -ifdef MINIMAL - -obj-y += spl_minimal.o tlb.o law.o - -else -ifdef CONFIG_SPL_BUILD -obj-y += spl.o -else -obj-y += p1_p2_rdb.o -obj-$(CONFIG_PCI) += pci.o -endif -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o - -endif diff --git a/board/freescale/p1_p2_rdb/README b/board/freescale/p1_p2_rdb/README deleted file mode 100644 index cd66e5878d..0000000000 --- a/board/freescale/p1_p2_rdb/README +++ /dev/null @@ -1,145 +0,0 @@ -Overview --------- -P2020RDB is a Low End Dual core platform supporting the P2020 processor -of QorIQ series. P2020 is an e500 based dual core SOC. - -Building U-boot ------------ -To build the u-boot for P2020RDB: - make P2020RDB_config - make - -NOR Flash Banks ------------ -RDB board for P2020 has two flash banks. They are both present on boot. - -Booting by default is always from the boot bank at 0xef00_0000. - -Memory Map ----------- -0xef00_0000 - 0xef7f_ffff Alternate bank 8MB -0xe800_0000 - 0xefff_ffff Boot bank 8MB - -0xef74_0000 - 0xef7f_ffff Alternate u-boot address 768KB -0xeff4_0000 - 0xefff_ffff Boot u-boot address 768KB - -Switch settings to boot from the NOR flash banks ------------------------------------------------- -SW4[8]=0 default NOR Flash bank -SW4[8]=1 Alternate NOR Flash bank - -Flashing Images ---------------- -To place a new u-boot image in the alternate flash bank and then boot -with that new image temporarily, use this: - tftp 1000000 u-boot.bin - erase ef740000 ef7fffff - cp.b 1000000 ef740000 c0000 - -Now to boot from the alternate bank change the SW4[8] from 0 to 1. - -To program the image in the boot flash bank: - tftp 1000000 u-boot.bin - protect off all - erase eff40000 ffffffff - cp.b 1000000 eff40000 c0000 - -Using the Device Tree Source File ---------------------------------- -To create the DTB (Device Tree Binary) image file, -use a command similar to this: - - dtc -b 0 -f -I dts -O dtb p2020rdb.dts > p2020rdb.dtb - -Likely, that .dts file will come from here; - - linux-2.6/arch/powerpc/boot/dts/p2020rdb.dts - -Booting Linux -------------- -Place a linux uImage in the TFTP disk area. - - tftp 1000000 uImage.p2020rdb - tftp 2000000 rootfs.ext2.gz.uboot - tftp c00000 p2020rdb.dtb - bootm 1000000 2000000 c00000 - -Implementing AMP(Asymmetric MultiProcessing) ---------------------------------------------- -1. Build kernel image for core0: - - a. $ make 85xx/p1_p2_rdb_defconfig - - b. $ make menuconfig - - un-select "Processor support"-> - "Symetric multi-processing support" - - c. $ make uImage - - d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core0 - -2. Build kernel image for core1: - - a. $ make 85xx/p1_p2_rdb_defconfig - - b. $ make menuconfig - - Un-select "Processor support"-> - "Symetric multi-processing support" - - Select "Advanced setup" -> - "Prompt for advanced kernel configuration options" - - Select - "Set physical address where the kernel is loaded" - and set it to 0x20000000, assuming core1 will - start from 512MB. - - Select "Set custom page offset address" - - Select "Set custom kernel base address" - - Select "Set maximum low memory" - - "Exit" and save the selection. - - c. $ make uImage - - d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core1 - -3. Create dtb for core0: - - $ dtc -I dts -O dtb -f -b 0 - arch/powerpc/boot/dts/p2020rdb_camp_core0.dts > - /tftpboot/p2020rdb_camp_core0.dtb - -4. Create dtb for core1: - - $ dtc -I dts -O dtb -f -b 1 - arch/powerpc/boot/dts/p2020rdb_camp_core1.dts > - /tftpboot/p2020rdb_camp_core1.dtb - -5. Bring up two cores separately: - - a. Power on the board, under u-boot prompt: - => setenv - => setenv - => setenv bootargs root=/dev/ram rw console=ttyS0,115200 - b. Bring up core1's kernel first: - => setenv bootm_low 0x20000000 - => setenv bootm_size 0x10000000 - => tftp 21000000 uImage.core1 - => tftp 22000000 ramdiskfile - => tftp 20c00000 p2020rdb_camp_core1.dtb - => interrupts off - => bootm start 21000000 22000000 20c00000 - => bootm loados - => bootm ramdisk - => bootm fdt - => fdt boardsetup - => fdt chosen $initrd_start $initrd_end - => bootm prep - => cpu 1 release $bootm_low - $fdtaddr - - c. Bring up core0's kernel(on the same u-boot console): - => setenv bootm_low 0 - => setenv bootm_size 0x20000000 - => tftp 1000000 uImage.core0 - => tftp 2000000 ramdiskfile - => tftp c00000 p2020rdb_camp_core0.dtb - => bootm 1000000 2000000 c00000 - -Please note only core0 will run u-boot, core1 starts kernel directly -after "cpu release" command is issued. diff --git a/board/freescale/p1_p2_rdb/ddr.c b/board/freescale/p1_p2_rdb/ddr.c deleted file mode 100644 index 98ee5f1021..0000000000 --- a/board/freescale/p1_p2_rdb/ddr.c +++ /dev/null @@ -1,221 +0,0 @@ -/* - * Copyright 2009, 2011 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F -#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202 -#define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 -#define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 -#define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 -#define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 -#define CONFIG_SYS_DDR_ZQ_CONTROL 0x00000000 -#define CONFIG_SYS_DDR_WRLVL_CONTROL 0x00000000 -#define CONFIG_SYS_DDR_SR_CNTR 0x00000000 -#define CONFIG_SYS_DDR_RCW_1 0x00000000 -#define CONFIG_SYS_DDR_RCW_2 0x00000000 -#define CONFIG_SYS_DDR_CONTROL 0x43000000 /* Type = DDR2*/ -#define CONFIG_SYS_DDR_CONTROL_2 0x24401000 -#define CONFIG_SYS_DDR_TIMING_4 0x00000000 -#define CONFIG_SYS_DDR_TIMING_5 0x00000000 - -#define CONFIG_SYS_DDR_TIMING_3_400 0x00010000 -#define CONFIG_SYS_DDR_TIMING_0_400 0x00260802 -#define CONFIG_SYS_DDR_TIMING_1_400 0x39355322 -#define CONFIG_SYS_DDR_TIMING_2_400 0x1f9048ca -#define CONFIG_SYS_DDR_CLK_CTRL_400 0x02800000 -#define CONFIG_SYS_DDR_MODE_1_400 0x00480432 -#define CONFIG_SYS_DDR_MODE_2_400 0x00000000 -#define CONFIG_SYS_DDR_INTERVAL_400 0x06180100 - -#define CONFIG_SYS_DDR_TIMING_3_533 0x00020000 -#define CONFIG_SYS_DDR_TIMING_0_533 0x00260802 -#define CONFIG_SYS_DDR_TIMING_1_533 0x4c47c432 -#define CONFIG_SYS_DDR_TIMING_2_533 0x0f9848ce -#define CONFIG_SYS_DDR_CLK_CTRL_533 0x02800000 -#define CONFIG_SYS_DDR_MODE_1_533 0x00040642 -#define CONFIG_SYS_DDR_MODE_2_533 0x00000000 -#define CONFIG_SYS_DDR_INTERVAL_533 0x08200100 - -#define CONFIG_SYS_DDR_TIMING_3_667 0x00030000 -#define CONFIG_SYS_DDR_TIMING_0_667 0x55770802 -#define CONFIG_SYS_DDR_TIMING_1_667 0x5f599543 -#define CONFIG_SYS_DDR_TIMING_2_667 0x0fa074d1 -#define CONFIG_SYS_DDR_CLK_CTRL_667 0x03000000 -#define CONFIG_SYS_DDR_MODE_1_667 0x00040852 -#define CONFIG_SYS_DDR_MODE_2_667 0x00000000 -#define CONFIG_SYS_DDR_INTERVAL_667 0x0a280100 - -#define CONFIG_SYS_DDR_TIMING_3_800 0x00040000 -#define CONFIG_SYS_DDR_TIMING_0_800 0x00770802 -#define CONFIG_SYS_DDR_TIMING_1_800 0x6f6b6543 -#define CONFIG_SYS_DDR_TIMING_2_800 0x0fa074d1 -#define CONFIG_SYS_DDR_CLK_CTRL_800 0x02800000 -#define CONFIG_SYS_DDR_MODE_1_800 0x00040852 -#define CONFIG_SYS_DDR_MODE_2_800 0x00000000 -#define CONFIG_SYS_DDR_INTERVAL_800 0x0c300100 - -fsl_ddr_cfg_regs_t ddr_cfg_regs_400 = { - .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS, - .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG, - .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2, - .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_400, - .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_400, - .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_400, - .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_400, - .ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL, - .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2, - .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_400, - .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_400, - .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL, - .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_400, - .ddr_data_init = CONFIG_MEM_INIT_VALUE, - .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_400, - .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR, - .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR, - .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4, - .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5, - .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL, - .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL, - .ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR, - .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1, - .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2 -}; - -fsl_ddr_cfg_regs_t ddr_cfg_regs_533 = { - .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS, - .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG, - .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2, - .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_533, - .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_533, - .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_533, - .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_533, - .ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL, - .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2, - .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_533, - .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_533, - .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL, - .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_533, - .ddr_data_init = CONFIG_MEM_INIT_VALUE, - .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_533, - .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR, - .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR, - .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4, - .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5, - .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL, - .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL, - .ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR, - .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1, - .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2 -}; - -fsl_ddr_cfg_regs_t ddr_cfg_regs_667 = { - .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS, - .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG, - .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2, - .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_667, - .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_667, - .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_667, - .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_667, - .ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL, - .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2, - .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_667, - .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_667, - .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL, - .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_667, - .ddr_data_init = CONFIG_MEM_INIT_VALUE, - .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_667, - .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR, - .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR, - .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4, - .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5, - .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL, - .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL, - .ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR, - .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1, - .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2 -}; - -fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = { - .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS, - .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG, - .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2, - .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_800, - .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_800, - .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_800, - .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_800, - .ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL, - .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2, - .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_800, - .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_800, - .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL, - .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_800, - .ddr_data_init = CONFIG_MEM_INIT_VALUE, - .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_800, - .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR, - .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR, - .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4, - .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5, - .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL, - .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL, - .ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR, - .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1, - .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2 -}; - -/* - * Fixed sdram init -- doesn't use serial presence detect. - */ - -phys_size_t fixed_sdram (void) -{ - fsl_ddr_cfg_regs_t ddr_cfg_regs; - size_t ddr_size; - struct cpu_type *cpu; - ulong ddr_freq, ddr_freq_mhz; - - cpu = gd->arch.cpu; - - ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; - -#if defined(CONFIG_SYS_RAMBOOT) - return ddr_size; -#endif - ddr_freq = get_ddr_freq(0); - ddr_freq_mhz = ddr_freq / 1000000; - - printf("Configuring DDR for %ld T/s data rate\n", ddr_freq); - - if(ddr_freq_mhz <= 400) - memcpy(&ddr_cfg_regs, &ddr_cfg_regs_400, sizeof(ddr_cfg_regs)); - else if(ddr_freq_mhz <= 533) - memcpy(&ddr_cfg_regs, &ddr_cfg_regs_533, sizeof(ddr_cfg_regs)); - else if(ddr_freq_mhz <= 667) - memcpy(&ddr_cfg_regs, &ddr_cfg_regs_667, sizeof(ddr_cfg_regs)); - else if(ddr_freq_mhz <= 800) - memcpy(&ddr_cfg_regs, &ddr_cfg_regs_800, sizeof(ddr_cfg_regs)); - else - panic("Unsupported DDR data rate %ld T/s\n", ddr_freq); - - /* P1020 and it's derivatives support max 32bit DDR width */ - if (cpu->soc_ver == SVR_P1020 || cpu->soc_ver == SVR_P1011) { - ddr_cfg_regs.ddr_sdram_cfg |= SDRAM_CFG_32_BE; - ddr_cfg_regs.cs[0].bnds = 0x0000001F; - } - - fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); - - set_ddr_laws(0, ddr_size, LAW_TRGT_IF_DDR_1); - return ddr_size; -} diff --git a/board/freescale/p1_p2_rdb/law.c b/board/freescale/p1_p2_rdb/law.c deleted file mode 100644 index b60a27fd92..0000000000 --- a/board/freescale/p1_p2_rdb/law.c +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright 2009-2010 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_VSC7385_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c deleted file mode 100644 index 61ed466fa7..0000000000 --- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c +++ /dev/null @@ -1,303 +0,0 @@ -/* - * Copyright 2009-2011 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -#define VSC7385_RST_SET 0x00080000 -#define SLIC_RST_SET 0x00040000 -#define SGMII_PHY_RST_SET 0x00020000 -#define PCIE_RST_SET 0x00010000 -#define RGMII_PHY_RST_SET 0x02000000 - -#define USB_RST_CLR 0x04000000 -#define USB2_PORT_OUT_EN 0x01000000 - -#define GPIO_DIR 0x060f0000 - -#define BOARD_PERI_RST_SET VSC7385_RST_SET | SLIC_RST_SET | \ - SGMII_PHY_RST_SET | PCIE_RST_SET | \ - RGMII_PHY_RST_SET - -#define SYSCLK_MASK 0x00200000 -#define BOARDREV_MASK 0x10100000 -#define BOARDREV_C 0x00100000 -#define BOARDREV_D 0x00000000 - -#define SYSCLK_66 66666666 -#define SYSCLK_100 100000000 - -unsigned long get_board_sys_clk(ulong dummy) -{ - volatile ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); - u32 val_gpdat, sysclk_gpio; - - val_gpdat = in_be32(&pgpio->gpdat); - sysclk_gpio = val_gpdat & SYSCLK_MASK; - - if(sysclk_gpio == 0) - return SYSCLK_66; - else - return SYSCLK_100; - - return 0; -} - -#ifdef CONFIG_MMC -int board_early_init_f (void) -{ - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - - setbits_be32(&gur->pmuxcr, - (MPC85xx_PMUXCR_SDHC_CD | - MPC85xx_PMUXCR_SDHC_WP)); - return 0; -} -#endif - -int checkboard (void) -{ - u32 val_gpdat, board_rev_gpio; - volatile ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); - char board_rev = 0; - struct cpu_type *cpu; - - val_gpdat = in_be32(&pgpio->gpdat); - board_rev_gpio = val_gpdat & BOARDREV_MASK; - if (board_rev_gpio == BOARDREV_C) - board_rev = 'C'; - else if (board_rev_gpio == BOARDREV_D) - board_rev = 'D'; - else - panic ("Unexpected Board REV %x detected!!\n", board_rev_gpio); - - cpu = gd->arch.cpu; - printf ("Board: %sRDB Rev%c\n", cpu->name, board_rev); - - setbits_be32(&pgpio->gpdir, GPIO_DIR); - -/* - * Bringing the following peripherals out of reset via GPIOs - * 0 = reset and 1 = out of reset - * GPIO12 - Reset to Ethernet Switch - * GPIO13 - Reset to SLIC/SLAC devices - * GPIO14 - Reset to SGMII_PHY_N - * GPIO15 - Reset to PCIe slots - * GPIO6 - Reset to RGMII PHY - * GPIO5 - Reset to USB3300 devices 1 = reset and 0 = out of reset - */ - clrsetbits_be32(&pgpio->gpdat, USB_RST_CLR, BOARD_PERI_RST_SET); - - return 0; -} - -int misc_init_r(void) -{ -#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - ccsr_gpio_t *gpio = (void *)CONFIG_SYS_MPC85xx_GPIO_ADDR; - - setbits_be32(&gpio->gpdir, USB2_PORT_OUT_EN); - setbits_be32(&gpio->gpdat, USB2_PORT_OUT_EN); - setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_ELBC_OFF_USB2_ON); -#endif - return 0; -} - -int board_early_init_r(void) -{ - const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - int flash_esel = find_tlb_idx((void *)flashbase, 1); - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - unsigned int orig_bus = i2c_get_bus_num(); - u8 i2c_data; - - i2c_set_bus_num(1); - if (i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 0, - 1, &i2c_data, sizeof(i2c_data)) == 0) { - if (i2c_data & 0x2) - puts("NOR Flash Bank : Secondary\n"); - else - puts("NOR Flash Bank : Primary\n"); - - if (i2c_data & 0x1) { - setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA); - puts("SD/MMC : 8-bit Mode\n"); - puts("eSPI : Disabled\n"); - } else { - puts("SD/MMC : 4-bit Mode\n"); - puts("eSPI : Enabled\n"); - } - } else { - puts("Failed reading I2C Chip 0x18 on bus 1\n"); - } - i2c_set_bus_num(orig_bus); - - /* - * Remap Boot flash region to caching-inhibited - * so that flash can be erased properly. - */ - - /* Flush d-cache and invalidate i-cache of any FLASH data */ - flush_dcache(); - invalidate_icache(); - - if (flash_esel == -1) { - /* very unlikely unless something is messed up */ - puts("Error: Could not find TLB for FLASH BASE\n"); - flash_esel = 2; /* give our best effort to continue */ - } else { - /* invalidate existing TLB entry for flash */ - disable_tlb(flash_esel); - } - - set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, flash_esel, BOOKE_PAGESZ_16M, 1); - rtc_reset(); - return 0; -} - - -#ifdef CONFIG_TSEC_ENET -int board_eth_init(bd_t *bis) -{ - struct fsl_pq_mdio_info mdio_info; - struct tsec_info_struct tsec_info[4]; - int num = 0; - char *tmp; - unsigned int vscfw_addr; - -#ifdef CONFIG_TSEC1 - SET_STD_TSEC_INFO(tsec_info[num], 1); - num++; -#endif -#ifdef CONFIG_TSEC2 - SET_STD_TSEC_INFO(tsec_info[num], 2); - num++; -#endif -#ifdef CONFIG_TSEC3 - SET_STD_TSEC_INFO(tsec_info[num], 3); - if (is_serdes_configured(SGMII_TSEC3)) { - puts("eTSEC3 is in sgmii mode.\n"); - tsec_info[num].flags |= TSEC_SGMII; - } - num++; -#endif - if (!num) { - printf("No TSECs initialized\n"); - return 0; - } -#ifdef CONFIG_VSC7385_ENET -/* If a VSC7385 microcode image is present, then upload it. */ - if ((tmp = getenv ("vscfw_addr")) != NULL) { - vscfw_addr = simple_strtoul (tmp, NULL, 16); - printf("uploading VSC7385 microcode from %x\n", vscfw_addr); - if (vsc7385_upload_firmware((void *) vscfw_addr, - CONFIG_VSC7385_IMAGE_SIZE)) - puts("Failure uploading VSC7385 microcode.\n"); - } else - puts("No address specified for VSC7385 microcode.\n"); -#endif - - mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; - mdio_info.name = DEFAULT_MII_NAME; - fsl_pq_mdio_init(bis, &mdio_info); - - tsec_eth_init(bis, tsec_info, num); - - return pci_eth_init(bis); -} -#endif - -#if defined(CONFIG_OF_BOARD_SETUP) -extern void ft_pci_board_setup(void *blob); - -int ft_board_setup(void *blob, bd_t *bd) -{ - const char *soc_usb_compat = "fsl-usb2-dr"; - int err, usb1_off, usb2_off; - phys_addr_t base; - phys_size_t size; - - ft_cpu_setup(blob, bd); - - base = getenv_bootm_low(); - size = getenv_bootm_size(); - -#if defined(CONFIG_PCI) - ft_pci_board_setup(blob); -#endif /* #if defined(CONFIG_PCI) */ - - fdt_fixup_memory(blob, (u64)base, (u64)size); - -#if defined(CONFIG_HAS_FSL_DR_USB) - fdt_fixup_dr_usb(blob, bd); -#endif - -#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) - /* Delete eLBC node as it is muxed with USB2 controller */ - if (hwconfig("usb2")) { - const char *soc_elbc_compat = "fsl,p1020-elbc"; - int off = fdt_node_offset_by_compatible(blob, -1, - soc_elbc_compat); - if (off < 0) { - printf("WARNING: could not find compatible node %s\n", - soc_elbc_compat); - return off; - } - err = fdt_del_node(blob, off); - if (err < 0) { - printf("WARNING: could not remove %s\n", - soc_elbc_compat); - return err; - } - return 0; - } -#endif - /* Delete USB2 node as it is muxed with eLBC */ - usb1_off = fdt_node_offset_by_compatible(blob, -1, - soc_usb_compat); - if (usb1_off < 0) { - printf("WARNING: could not find compatible node %s\n", - soc_usb_compat); - return usb1_off; - } - usb2_off = fdt_node_offset_by_compatible(blob, usb1_off, - soc_usb_compat); - if (usb2_off < 0) { - printf("WARNING: could not find compatible node %s\n", - soc_usb_compat); - return usb2_off; - } - err = fdt_del_node(blob, usb2_off); - if (err < 0) { - printf("WARNING: could not remove %s\n", soc_usb_compat); - return err; - } - - return 0; -} - -#endif diff --git a/board/freescale/p1_p2_rdb/pci.c b/board/freescale/p1_p2_rdb/pci.c deleted file mode 100644 index 745ebb15e0..0000000000 --- a/board/freescale/p1_p2_rdb/pci.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright 2009-2010 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -void pci_init_board(void) -{ - fsl_pcie_init_board(0); -} - -void ft_pci_board_setup(void *blob) -{ - FT_FSL_PCI_SETUP; -} diff --git a/board/freescale/p1_p2_rdb/spl.c b/board/freescale/p1_p2_rdb/spl.c deleted file mode 100644 index f30c5fe3e6..0000000000 --- a/board/freescale/p1_p2_rdb/spl.c +++ /dev/null @@ -1,141 +0,0 @@ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -#define SYSCLK_MASK 0x00200000 -#define BOARDREV_MASK 0x10100000 - -#define SYSCLK_66 66666666 -#define SYSCLK_100 100000000 - -unsigned long get_board_sys_clk(ulong dummy) -{ - ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); - u32 val_gpdat, sysclk_gpio; - - val_gpdat = in_be32(&pgpio->gpdat); - sysclk_gpio = val_gpdat & SYSCLK_MASK; - - if (sysclk_gpio == 0) - return SYSCLK_66; - else - return SYSCLK_100; - - return 0; -} - -phys_size_t get_effective_memsize(void) -{ - return CONFIG_SYS_L2_SIZE; -} - -void board_init_f(ulong bootflag) -{ - u32 plat_ratio, bus_clk; - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - - console_init_f(); - - /* Set pmuxcr to allow both i2c1 and i2c2 */ - setbits_be32(&gur->pmuxcr, in_be32(&gur->pmuxcr) | 0x1000); - setbits_be32(&gur->pmuxcr, - in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA); - - /* Read back the register to synchronize the write. */ - in_be32(&gur->pmuxcr); - -#ifdef CONFIG_SPL_SPI_BOOT - clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA); -#endif - - /* initialize selected port with appropriate baud rate */ - plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; - plat_ratio >>= 1; - bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio; - gd->bus_clk = bus_clk; - - NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, - bus_clk / 16 / CONFIG_BAUDRATE); -#ifdef CONFIG_SPL_MMC_BOOT - puts("\nSD boot...\n"); -#elif defined(CONFIG_SPL_SPI_BOOT) - puts("\nSPI Flash boot...\n"); -#endif - - /* copy code to RAM and jump to it - this should not return */ - /* NOTE - code has to be copied out of NAND buffer before - * other blocks can be read. - */ - relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE); -} - -void board_init_r(gd_t *gd, ulong dest_addr) -{ - /* Pointer is writable since we allocated a register for it */ - gd = (gd_t *)CONFIG_SPL_GD_ADDR; - bd_t *bd; - - memset(gd, 0, sizeof(gd_t)); - bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t)); - memset(bd, 0, sizeof(bd_t)); - gd->bd = bd; - bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR; - bd->bi_memsize = CONFIG_SYS_L2_SIZE; - - probecpu(); - get_clocks(); - mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR, - CONFIG_SPL_RELOC_MALLOC_SIZE); - -#ifdef CONFIG_SPL_MMC_BOOT - mmc_initialize(bd); -#endif - /* relocate environment function pointers etc. */ -#ifdef CONFIG_SPL_NAND_BOOT - nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, - (uchar *)CONFIG_ENV_ADDR); -#endif -#ifdef CONFIG_SPL_NAND_BOOT - nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, - (uchar *)CONFIG_ENV_ADDR); -#endif -#ifdef CONFIG_SPL_MMC_BOOT - mmc_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, - (uchar *)CONFIG_ENV_ADDR); -#endif -#ifdef CONFIG_SPL_SPI_BOOT - spi_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, - (uchar *)CONFIG_ENV_ADDR); -#endif - - gd->env_addr = (ulong)(CONFIG_ENV_ADDR); - gd->env_valid = 1; - - gd->ram_size = initdram(0); -#ifdef CONFIG_SPL_NAND_BOOT - puts("Tertiary program loader running in sram..."); -#else - puts("Second program loader running in sram...\n"); -#endif - -#ifdef CONFIG_SPL_MMC_BOOT - mmc_boot(); -#elif defined(CONFIG_SPL_SPI_BOOT) - spi_boot(); -#elif defined(CONFIG_SPL_NAND_BOOT) - nand_boot(); -#endif -} diff --git a/board/freescale/p1_p2_rdb/spl_minimal.c b/board/freescale/p1_p2_rdb/spl_minimal.c deleted file mode 100644 index 96a4d1cb0a..0000000000 --- a/board/freescale/p1_p2_rdb/spl_minimal.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; -#define SYSCLK_MASK 0x00200000 -#define BOARDREV_MASK 0x10100000 - -#define SYSCLK_66 66666666 -#define SYSCLK_100 100000000 - -unsigned long get_board_sys_clk(ulong dummy) -{ - ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); - u32 val_gpdat, sysclk_gpio; - - val_gpdat = in_be32(&pgpio->gpdat); - sysclk_gpio = val_gpdat & SYSCLK_MASK; - - if (sysclk_gpio == 0) - return SYSCLK_66; - else - return SYSCLK_100; - - return 0; -} - -void board_init_f(ulong bootflag) -{ - u32 plat_ratio; - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - -#if defined(CONFIG_SYS_NAND_BR_PRELIM) && defined(CONFIG_SYS_NAND_OR_PRELIM) - set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM); - set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM); -#endif - - /* initialize selected port with appropriate baud rate */ - plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; - plat_ratio >>= 1; - gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio; - - NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, - gd->bus_clk / 16 / CONFIG_BAUDRATE); - - puts("\nNAND boot... "); - - /* copy code to RAM and jump to it - this should not return */ - /* NOTE - code has to be copied out of NAND buffer before - * other blocks can be read. - */ - relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE); -} - -void board_init_r(gd_t *gd, ulong dest_addr) -{ - puts("\nSecond program loader running in sram..."); - nand_boot(); -} - -void putc(char c) -{ - if (c == '\n') - NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r'); - - NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c); -} - -void puts(const char *str) -{ - while (*str) - putc(*str++); -} diff --git a/board/freescale/p1_p2_rdb/tlb.c b/board/freescale/p1_p2_rdb/tlb.c deleted file mode 100644 index 73f5729ef5..0000000000 --- a/board/freescale/p1_p2_rdb/tlb.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -struct fsl_e_tlb_entry tlb_table[] = { - /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, - CONFIG_SYS_INIT_RAM_ADDR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - /* TLB 1 */ - /* *I*** - Covers boot page */ - SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_4K, 1), - - /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_1M, 1), - -#ifndef CONFIG_SPL_BUILD - /* W**G* - Flash/promjet, localbus */ - /* This will be changed to *I*G* after relocation to RAM. */ - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, - MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, - 0, 2, BOOKE_PAGESZ_16M, 1), - -#if defined(CONFIG_PCI) - /* *I*G* - PCI */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_1G, 1), - - /* *I*G* - PCI I/O */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 4, BOOKE_PAGESZ_256K, 1), - -#endif /* #if defined(CONFIG_PCI) */ -#endif - /* *I*G - NAND */ - SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 5, BOOKE_PAGESZ_1M, 1), - - /* *I*G - VSC7385 Switch */ - SET_TLB_ENTRY(1, CONFIG_SYS_VSC7385_BASE, CONFIG_SYS_VSC7385_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 6, BOOKE_PAGESZ_1M, 1), - -#ifdef CONFIG_SYS_INIT_L2_ADDR - /* *I*G - L2SRAM */ - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G, - 0, 11, BOOKE_PAGESZ_256K, 1), -#if CONFIG_SYS_L2_SIZE >= (256 << 10) - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000, - CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 12, BOOKE_PAGESZ_256K, 1), -#endif -#endif - -#if defined(CONFIG_SYS_RAMBOOT) || \ - (defined(CONFIG_SPL) && !defined(CONFIG_SPL_COMMON_INIT_DDR)) - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 7, BOOKE_PAGESZ_1G, 1) -#endif -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/configs/P1011RDB_36BIT_SDCARD_defconfig b/configs/P1011RDB_36BIT_SDCARD_defconfig deleted file mode 100644 index 7205bef84b..0000000000 --- a/configs/P1011RDB_36BIT_SDCARD_defconfig +++ /dev/null @@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P1011RDB,36BIT,SDCARD" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y diff --git a/configs/P1011RDB_36BIT_SPIFLASH_defconfig b/configs/P1011RDB_36BIT_SPIFLASH_defconfig deleted file mode 100644 index 8b3806e7c1..0000000000 --- a/configs/P1011RDB_36BIT_SPIFLASH_defconfig +++ /dev/null @@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P1011RDB,36BIT,SPIFLASH" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y diff --git a/configs/P1011RDB_36BIT_defconfig b/configs/P1011RDB_36BIT_defconfig deleted file mode 100644 index c47f2e25ce..0000000000 --- a/configs/P1011RDB_36BIT_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="P1011RDB,36BIT" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P1_P2_RDB=y diff --git a/configs/P1011RDB_NAND_defconfig b/configs/P1011RDB_NAND_defconfig deleted file mode 100644 index aac0190c41..0000000000 --- a/configs/P1011RDB_NAND_defconfig +++ /dev/null @@ -1,6 +0,0 @@ -CONFIG_SPL=y -CONFIG_TPL=y -CONFIG_SYS_EXTRA_OPTIONS="P1011RDB,NAND" -+ST:CONFIG_PPC=y -+ST:CONFIG_MPC85xx=y -+ST:CONFIG_TARGET_P1_P2_RDB=y diff --git a/configs/P1011RDB_SDCARD_defconfig b/configs/P1011RDB_SDCARD_defconfig deleted file mode 100644 index 16e872f757..0000000000 --- a/configs/P1011RDB_SDCARD_defconfig +++ /dev/null @@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P1011RDB,SDCARD" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y diff --git a/configs/P1011RDB_SPIFLASH_defconfig b/configs/P1011RDB_SPIFLASH_defconfig deleted file mode 100644 index d14820fd10..0000000000 --- a/configs/P1011RDB_SPIFLASH_defconfig +++ /dev/null @@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P1011RDB,SPIFLASH" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y diff --git a/configs/P1011RDB_defconfig b/configs/P1011RDB_defconfig deleted file mode 100644 index d14868ab64..0000000000 --- a/configs/P1011RDB_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="P1011RDB" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P1_P2_RDB=y diff --git a/configs/P1020RDB_36BIT_SDCARD_defconfig b/configs/P1020RDB_36BIT_SDCARD_defconfig deleted file mode 100644 index a18563eea9..0000000000 --- a/configs/P1020RDB_36BIT_SDCARD_defconfig +++ /dev/null @@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P1020RDB,36BIT,SDCARD" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y diff --git a/configs/P1020RDB_36BIT_SPIFLASH_defconfig b/configs/P1020RDB_36BIT_SPIFLASH_defconfig deleted file mode 100644 index aa145fcd3d..0000000000 --- a/configs/P1020RDB_36BIT_SPIFLASH_defconfig +++ /dev/null @@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P1020RDB,36BIT,SPIFLASH" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y diff --git a/configs/P1020RDB_36BIT_defconfig b/configs/P1020RDB_36BIT_defconfig deleted file mode 100644 index 844651f88c..0000000000 --- a/configs/P1020RDB_36BIT_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="P1020RDB,36BIT" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P1_P2_RDB=y diff --git a/configs/P1020RDB_NAND_defconfig b/configs/P1020RDB_NAND_defconfig deleted file mode 100644 index 441241bc87..0000000000 --- a/configs/P1020RDB_NAND_defconfig +++ /dev/null @@ -1,6 +0,0 @@ -CONFIG_SPL=y -CONFIG_TPL=y -CONFIG_SYS_EXTRA_OPTIONS="P1020RDB,NAND" -+ST:CONFIG_PPC=y -+ST:CONFIG_MPC85xx=y -+ST:CONFIG_TARGET_P1_P2_RDB=y diff --git a/configs/P1020RDB_SDCARD_defconfig b/configs/P1020RDB_SDCARD_defconfig deleted file mode 100644 index 1349bea404..0000000000 --- a/configs/P1020RDB_SDCARD_defconfig +++ /dev/null @@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P1020RDB,SDCARD" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y diff --git a/configs/P1020RDB_SPIFLASH_defconfig b/configs/P1020RDB_SPIFLASH_defconfig deleted file mode 100644 index 7eb86969de..0000000000 --- a/configs/P1020RDB_SPIFLASH_defconfig +++ /dev/null @@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P1020RDB,SPIFLASH" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y diff --git a/configs/P1020RDB_defconfig b/configs/P1020RDB_defconfig deleted file mode 100644 index fc58ac92c6..0000000000 --- a/configs/P1020RDB_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="P1020RDB" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P1_P2_RDB=y diff --git a/configs/P2010RDB_36BIT_SDCARD_defconfig b/configs/P2010RDB_36BIT_SDCARD_defconfig deleted file mode 100644 index 1381e8ef4d..0000000000 --- a/configs/P2010RDB_36BIT_SDCARD_defconfig +++ /dev/null @@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P2010RDB,36BIT,SDCARD" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y diff --git a/configs/P2010RDB_36BIT_SPIFLASH_defconfig b/configs/P2010RDB_36BIT_SPIFLASH_defconfig deleted file mode 100644 index 53ebca1980..0000000000 --- a/configs/P2010RDB_36BIT_SPIFLASH_defconfig +++ /dev/null @@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P2010RDB,36BIT,SPIFLASH" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y diff --git a/configs/P2010RDB_36BIT_defconfig b/configs/P2010RDB_36BIT_defconfig deleted file mode 100644 index de29dcb533..0000000000 --- a/configs/P2010RDB_36BIT_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="P2010RDB,36BIT" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P1_P2_RDB=y diff --git a/configs/P2010RDB_NAND_defconfig b/configs/P2010RDB_NAND_defconfig deleted file mode 100644 index bc91a67164..0000000000 --- a/configs/P2010RDB_NAND_defconfig +++ /dev/null @@ -1,6 +0,0 @@ -CONFIG_SPL=y -CONFIG_TPL=y -CONFIG_SYS_EXTRA_OPTIONS="P2010RDB,NAND" -+ST:CONFIG_PPC=y -+ST:CONFIG_MPC85xx=y -+ST:CONFIG_TARGET_P1_P2_RDB=y diff --git a/configs/P2010RDB_SDCARD_defconfig b/configs/P2010RDB_SDCARD_defconfig deleted file mode 100644 index fd4ade7112..0000000000 --- a/configs/P2010RDB_SDCARD_defconfig +++ /dev/null @@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P2010RDB,SDCARD" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y diff --git a/configs/P2010RDB_SPIFLASH_defconfig b/configs/P2010RDB_SPIFLASH_defconfig deleted file mode 100644 index 9631864509..0000000000 --- a/configs/P2010RDB_SPIFLASH_defconfig +++ /dev/null @@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P2010RDB,SPIFLASH" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y diff --git a/configs/P2010RDB_defconfig b/configs/P2010RDB_defconfig deleted file mode 100644 index 3b3352a5a6..0000000000 --- a/configs/P2010RDB_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="P2010RDB" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P1_P2_RDB=y diff --git a/configs/P2020RDB_36BIT_SDCARD_defconfig b/configs/P2020RDB_36BIT_SDCARD_defconfig deleted file mode 100644 index 43cc2e3051..0000000000 --- a/configs/P2020RDB_36BIT_SDCARD_defconfig +++ /dev/null @@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,36BIT,SDCARD" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y diff --git a/configs/P2020RDB_36BIT_SPIFLASH_defconfig b/configs/P2020RDB_36BIT_SPIFLASH_defconfig deleted file mode 100644 index f1199b6622..0000000000 --- a/configs/P2020RDB_36BIT_SPIFLASH_defconfig +++ /dev/null @@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,36BIT,SPIFLASH" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y diff --git a/configs/P2020RDB_36BIT_defconfig b/configs/P2020RDB_36BIT_defconfig deleted file mode 100644 index 87490fd9c8..0000000000 --- a/configs/P2020RDB_36BIT_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,36BIT" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P1_P2_RDB=y diff --git a/configs/P2020RDB_NAND_defconfig b/configs/P2020RDB_NAND_defconfig deleted file mode 100644 index 70ee084ca0..0000000000 --- a/configs/P2020RDB_NAND_defconfig +++ /dev/null @@ -1,6 +0,0 @@ -CONFIG_SPL=y -CONFIG_TPL=y -CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,NAND" -+ST:CONFIG_PPC=y -+ST:CONFIG_MPC85xx=y -+ST:CONFIG_TARGET_P1_P2_RDB=y diff --git a/configs/P2020RDB_SDCARD_defconfig b/configs/P2020RDB_SDCARD_defconfig deleted file mode 100644 index 2bf57739ca..0000000000 --- a/configs/P2020RDB_SDCARD_defconfig +++ /dev/null @@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,SDCARD" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y diff --git a/configs/P2020RDB_SPIFLASH_defconfig b/configs/P2020RDB_SPIFLASH_defconfig deleted file mode 100644 index 290ebd2d34..0000000000 --- a/configs/P2020RDB_SPIFLASH_defconfig +++ /dev/null @@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,SPIFLASH" -+S:CONFIG_PPC=y -+S:CONFIG_MPC85xx=y -+S:CONFIG_TARGET_P1_P2_RDB=y diff --git a/configs/P2020RDB_defconfig b/configs/P2020RDB_defconfig deleted file mode 100644 index cc397354ba..0000000000 --- a/configs/P2020RDB_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="P2020RDB" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P1_P2_RDB=y diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 3b201b75b9..f436a8e226 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,6 +12,10 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +P2020RDB powerpc mpc85xx - - Poonam Aggrwal +P2010RDB powerpc mpc85xx - - +P1020RDB powerpc mpc85xx - - +P1011RDB powerpc mpc85xx - - MPC8360EMDS powerpc mpc83xx - - Dave Liu MPC8360ERDK powerpc mpc83xx - - Anton Vorontsov P3G4 powerpc 74xx_7xx d928664f 2015-01-16 Wolfgang Denk diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h deleted file mode 100644 index c75638abda..0000000000 --- a/include/configs/P1_P2_RDB.h +++ /dev/null @@ -1,808 +0,0 @@ -/* - * Copyright 2009-2011 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * P1 P2 RDB board configuration file - * This file is intended to address a set of Low End and Ultra Low End - * Freescale SOCs of QorIQ series(RDB platforms). - * Currently only P2020RDB - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#ifdef CONFIG_36BIT -#define CONFIG_PHYS_64BIT -#endif - -#ifdef CONFIG_P1011RDB -#define CONFIG_P1011 -#define CONFIG_SYS_L2_SIZE (256 << 10) -#endif -#ifdef CONFIG_P1020RDB -#define CONFIG_P1020 -#define CONFIG_SYS_L2_SIZE (256 << 10) -#endif -#ifdef CONFIG_P2010RDB -#define CONFIG_P2010 -#define CONFIG_SYS_L2_SIZE (512 << 10) -#endif -#ifdef CONFIG_P2020RDB -#define CONFIG_P2020 -#define CONFIG_SYS_L2_SIZE (512 << 10) -#endif - -#ifdef CONFIG_SDCARD -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_MMC_MINIMAL -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SYS_TEXT_BASE 0x11001000 -#define CONFIG_SPL_TEXT_BASE 0xf8f81000 -#define CONFIG_SPL_PAD_TO 0x20000 -#define CONFIG_SPL_MAX_SIZE (128 * 1024) -#define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) -#define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) -#define CONFIG_SYS_MMC_U_BOOT_OFFS (129 << 10) -#define CONFIG_SYS_MPC85XX_NO_RESETVEC -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" -#define CONFIG_SPL_MMC_BOOT -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_COMMON_INIT_DDR -#endif -#endif - -#ifdef CONFIG_SPIFLASH -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT -#define CONFIG_SPL_SPI_FLASH_MINIMAL -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SYS_TEXT_BASE 0x11001000 -#define CONFIG_SPL_TEXT_BASE 0xf8f81000 -#define CONFIG_SPL_PAD_TO 0x20000 -#define CONFIG_SPL_MAX_SIZE (128 * 1024) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (128 << 10) -#define CONFIG_SYS_MPC85XX_NO_RESETVEC -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" -#define CONFIG_SPL_SPI_BOOT -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_COMMON_INIT_DDR -#endif -#endif - -#ifdef CONFIG_NAND -#ifdef CONFIG_TPL_BUILD -#define CONFIG_SPL_NAND_BOOT -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_NAND_INIT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT -#define CONFIG_SPL_COMMON_INIT_DDR -#define CONFIG_SPL_MAX_SIZE (128 << 10) -#define CONFIG_SPL_TEXT_BASE 0xf8f81000 -#define CONFIG_SYS_MPC85XX_NO_RESETVEC -#define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) -#define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) -#define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) -#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) -#elif defined(CONFIG_SPL_BUILD) -#define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_TEXT_BASE 0xff800000 -#define CONFIG_SPL_MAX_SIZE 4096 -#define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) -#define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 -#define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) -#endif /* not CONFIG_TPL_BUILD */ - -#define CONFIG_SPL_PAD_TO 0x20000 -#define CONFIG_TPL_PAD_TO 0x20000 -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SYS_TEXT_BASE 0x11001000 -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" -#endif - -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff40000 -#endif - -#ifndef CONFIG_RESET_VECTOR_ADDRESS -#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc -#endif - -#ifndef CONFIG_SYS_MONITOR_BASE -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE -#else -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif -#endif - -/* High Level Configuration Options */ -#define CONFIG_BOOKE 1 /* BOOKE */ -#define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_FSL_ELBC 1 /* Enable eLBC Support */ - -#define CONFIG_PCI 1 /* Enable PCI/PCIE */ -#if defined(CONFIG_PCI) -#define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ -#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ -#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ -#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ -#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ -#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ -#endif /* #if defined(CONFIG_PCI) */ -#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ -#define CONFIG_TSEC_ENET /* tsec ethernet support */ -#define CONFIG_ENV_OVERWRITE - -#if defined(CONFIG_PCI) -#define CONFIG_E1000 1 /* E1000 pci Ethernet card*/ -#endif - -#ifndef __ASSEMBLY__ -extern unsigned long get_board_sys_clk(unsigned long dummy); -#endif -#define CONFIG_DDR_CLK_FREQ 66666666 /* DDRCLK on P1_P2 RDB */ -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /*sysclk for P1_P2 RDB */ - -#if defined(CONFIG_P2020) || defined(CONFIG_P1020) -#define CONFIG_MP -#endif - -#define CONFIG_HWCONFIG - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ - -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ - -#define CONFIG_ENABLE_36BIT_PHYS 1 - -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_ADDR_MAP 1 -#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ -#endif - -#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x1fffffff -#define CONFIG_PANIC_HANG /* do not reset board on panic */ - -/* - * Config the L2 Cache as L2 SRAM -*/ -#if defined(CONFIG_SPL_BUILD) -#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) -#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 -#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) -#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 -#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) -#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024) -#define CONFIG_SPL_RELOC_STACK_SIZE (32 << 10) -#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024) -#if defined(CONFIG_P2020RDB) -#define CONFIG_SPL_RELOC_MALLOC_SIZE (364 << 10) -#else -#define CONFIG_SPL_RELOC_MALLOC_SIZE (108 << 10) -#endif -#elif defined(CONFIG_NAND) -#ifdef CONFIG_TPL_BUILD -#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 -#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) -#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 -#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) -#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) -#else -#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 -#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) -#define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x2000) -#define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) -#endif /* CONFIG_TPL_BUILD */ -#endif -#endif - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE -#endif - -/* DDR Setup */ -#define CONFIG_SYS_FSL_DDR2 -#undef CONFIG_FSL_DDR_INTERACTIVE -#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ - -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef - -#if defined(CONFIG_P1011RDB) || defined(CONFIG_P1020RDB) -/* - * P1020 and it's derivatives support max 32bit DDR width - * So Reduce available DDR size -*/ -#define CONFIG_SYS_SDRAM_SIZE 512 -#else -#define CONFIG_SYS_SDRAM_SIZE 1024 -#endif -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE - -#define CONFIG_NUM_DDR_CONTROLLERS 1 -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 1 - -#define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d -#define CONFIG_SYS_DDR_ERR_DIS 0x00000000 -#define CONFIG_SYS_DDR_SBE 0x00FF0000 - -/* - * Memory map - * - * 0x0000_0000 0x3fff_ffff DDR 1G cacheablen - * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable - * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable - * - * Localbus cacheable (TBD) - * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable - * - * Localbus non-cacheable - * 0xef00_0000 0xefff_ffff FLASH 16M non-cacheable - * 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable - * 0xffb0_0000 0xffbf_ffff VSC7385 switch 1M non-cacheable - * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 - * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable - */ - -/* - * Local Bus Definitions - */ -#define CONFIG_SYS_FLASH_BASE 0xef000000 /* start of FLASH 16M */ - -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_FLASH_BASE_PHYS 0xfef000000ull -#else -#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE -#endif - -#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ - BR_PS_16 | BR_V) -#define CONFIG_FLASH_OR_PRELIM 0xff000ff7 - -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} -#define CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */ -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 - -#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ -#define CONFIG_MISC_INIT_R -#define CONFIG_HWCONFIG - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR -/* The assembler doesn't like typecast */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ - ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ - CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) -#else -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS -#endif -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ - - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (768 * 1024) -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc*/ - -#define CONFIG_SYS_NAND_BASE 0xff800000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull -#else -#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE -#endif - -#define CONFIG_CMD_NAND -#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_NAND_FSL_ELBC 1 -#define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) - -/* NAND flash config */ -#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ - | (2< - -#define CONFIG_CMD_DATE -#define CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SETEXPR -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) -#define CONFIG_CMD_NET -#define CONFIG_CMD_PCI -#endif - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#define CONFIG_MMC 1 - -#ifdef CONFIG_MMC -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ -#define CONFIG_CMD_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_FSL_ESDHC -#define CONFIG_GENERIC_MMC -#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR -#ifdef CONFIG_P2020 -#define CONFIG_SYS_FSL_ESDHC_USE_PIO /* P2020 eSDHC DMA is not functional*/ -#endif -#endif - -#define CONFIG_HAS_FSL_DR_USB - -#if defined(CONFIG_HAS_FSL_DR_USB) -#define CONFIG_USB_EHCI - -#ifdef CONFIG_USB_EHCI -#define CONFIG_CMD_USB -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_USB_EHCI_FSL -#define CONFIG_USB_STORAGE -#endif -#endif - -#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_DOS_PARTITION -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) - /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 64 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20)/* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -/* - * Environment Configuration - */ - -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH2 -#endif - -#define CONFIG_HOSTNAME P2020RDB -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */ - -/* default location for tftp and bootm */ -#define CONFIG_LOADADDR 1000000 - -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ - "loadaddr=1000000\0" \ - "tftpflash=tftpboot $loadaddr $uboot; " \ - "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "erase " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ - " $filesize; " \ - "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ - " $filesize\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=2000000\0" \ - "ramdiskfile=rootfs.ext2.gz.uboot\0" \ - "fdtaddr=c00000\0" \ - "fdtfile=p2020rdb.dtb\0" \ - "bdev=sda1\0" \ - "jffs2nor=mtdblock3\0" \ - "norbootaddr=ef080000\0" \ - "norfdtaddr=ef040000\0" \ - "jffs2nand=mtdblock9\0" \ - "nandbootaddr=100000\0" \ - "nandfdtaddr=80000\0" \ - "nandimgsize=400000\0" \ - "nandfdtsize=80000\0" \ - "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" \ - "vscfw_addr=ef000000\0" \ - "othbootargs=ramdisk_size=600000\0" \ - "usbfatboot=setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs; " \ - "usb start;" \ - "fatload usb 0:2 $loadaddr $bootfile;" \ - "fatload usb 0:2 $fdtaddr $fdtfile;" \ - "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ - "usbext2boot=setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs; " \ - "usb start;" \ - "ext2load usb 0:4 $loadaddr $bootfile;" \ - "ext2load usb 0:4 $fdtaddr $fdtfile;" \ - "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ - "norboot=setenv bootargs root=/dev/$jffs2nor rw " \ - "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \ - "bootm $norbootaddr - $norfdtaddr\0" \ - "nandboot=setenv bootargs root=/dev/$jffs2nand rw rootfstype=jffs2 " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "nand read 2000000 $nandbootaddr $nandimgsize;" \ - "nand read 3000000 $nandfdtaddr $nandfdtsize;" \ - "bootm 2000000 - 3000000;\0" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_HDBOOT \ - "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "usb start;" \ - "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ - "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs; " \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND CONFIG_HDBOOT - -#endif /* __CONFIG_H */ -- 2.39.5