From 7495e41ba6420b6a5fd8928cded32d789d4c1639 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 30 Aug 2015 19:18:58 -0600 Subject: [PATCH] arm: Remove snowball and u8500_href boards These boards have not been converted to generic board by the deadline. Remove them. Signed-off-by: Simon Glass --- arch/arm/Kconfig | 10 - arch/arm/include/asm/mach-types.h | 26 - board/st-ericsson/snowball/Kconfig | 15 - board/st-ericsson/snowball/MAINTAINERS | 6 - board/st-ericsson/snowball/Makefile | 9 - board/st-ericsson/snowball/db8500_pins.h | 745 ----------------------- board/st-ericsson/snowball/snowball.c | 340 ----------- board/st-ericsson/u8500/Kconfig | 15 - board/st-ericsson/u8500/MAINTAINERS | 6 - board/st-ericsson/u8500/Makefile | 9 - board/st-ericsson/u8500/gpio.c | 331 ---------- board/st-ericsson/u8500/u8500_href.c | 477 --------------- configs/snowball_defconfig | 13 - configs/u8500_href_defconfig | 13 - include/configs/snowball.h | 232 ------- include/configs/u8500_href.h | 198 ------ 16 files changed, 2445 deletions(-) delete mode 100644 board/st-ericsson/snowball/Kconfig delete mode 100644 board/st-ericsson/snowball/MAINTAINERS delete mode 100644 board/st-ericsson/snowball/Makefile delete mode 100644 board/st-ericsson/snowball/db8500_pins.h delete mode 100644 board/st-ericsson/snowball/snowball.c delete mode 100644 board/st-ericsson/u8500/Kconfig delete mode 100644 board/st-ericsson/u8500/MAINTAINERS delete mode 100644 board/st-ericsson/u8500/Makefile delete mode 100644 board/st-ericsson/u8500/gpio.c delete mode 100644 board/st-ericsson/u8500/u8500_href.c delete mode 100644 configs/snowball_defconfig delete mode 100644 configs/u8500_href_defconfig delete mode 100644 include/configs/snowball.h delete mode 100644 include/configs/u8500_href.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a501f15834..34c20e9eb5 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -564,18 +564,10 @@ config ARCH_SUNXI select USB_STORAGE select USB_KEYBOARD -config TARGET_SNOWBALL - bool "Support snowball" - select CPU_V7 - config TARGET_TS4800 bool "Support TS4800" select CPU_V7 -config TARGET_U8500_HREF - bool "Support u8500_href" - select CPU_V7 - config TARGET_VF610TWR bool "Support vf610twr" select CPU_V7 @@ -868,8 +860,6 @@ source "board/spear/spear310/Kconfig" source "board/spear/spear320/Kconfig" source "board/spear/spear600/Kconfig" source "board/spear/x600/Kconfig" -source "board/st-ericsson/snowball/Kconfig" -source "board/st-ericsson/u8500/Kconfig" source "board/st/stm32f429-discovery/Kconfig" source "board/st/stv0991/Kconfig" source "board/sunxi/Kconfig" diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h index 55a543ac78..d51be0b1d2 100644 --- a/arch/arm/include/asm/mach-types.h +++ b/arch/arm/include/asm/mach-types.h @@ -402,7 +402,6 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_IGEP0020 2344 #define MACH_TYPE_NUC932EVB 2356 #define MACH_TYPE_OPENRD_CLIENT 2361 -#define MACH_TYPE_U8500 2368 #define MACH_TYPE_MX51_EFIKASB 2370 #define MACH_TYPE_MARVELL_JASPER 2382 #define MACH_TYPE_FLINT 2383 @@ -974,7 +973,6 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_RHINO 3360 #define MACH_TYPE_ARMLEX4210 3361 #define MACH_TYPE_SWARCOEXTMODEM 3362 -#define MACH_TYPE_SNOWBALL 3363 #define MACH_TYPE_PCM049 3364 #define MACH_TYPE_VIGOR 3365 #define MACH_TYPE_OSLO_AMUNDSEN 3366 @@ -5754,18 +5752,6 @@ extern unsigned int __machine_arch_type; # define machine_is_openrd_client() (0) #endif -#ifdef CONFIG_MACH_U8500 -# ifdef machine_arch_type -# undef machine_arch_type -# define machine_arch_type __machine_arch_type -# else -# define machine_arch_type MACH_TYPE_U8500 -# endif -# define machine_is_u8500() (machine_arch_type == MACH_TYPE_U8500) -#else -# define machine_is_u8500() (0) -#endif - #ifdef CONFIG_MACH_MX51_EFIKASB # ifdef machine_arch_type # undef machine_arch_type @@ -12618,18 +12604,6 @@ extern unsigned int __machine_arch_type; # define machine_is_swarcoextmodem() (0) #endif -#ifdef CONFIG_MACH_SNOWBALL -# ifdef machine_arch_type -# undef machine_arch_type -# define machine_arch_type __machine_arch_type -# else -# define machine_arch_type MACH_TYPE_SNOWBALL -# endif -# define machine_is_snowball() (machine_arch_type == MACH_TYPE_SNOWBALL) -#else -# define machine_is_snowball() (0) -#endif - #ifdef CONFIG_MACH_PCM049 # ifdef machine_arch_type # undef machine_arch_type diff --git a/board/st-ericsson/snowball/Kconfig b/board/st-ericsson/snowball/Kconfig deleted file mode 100644 index 0b3a0cca6c..0000000000 --- a/board/st-ericsson/snowball/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_SNOWBALL - -config SYS_BOARD - default "snowball" - -config SYS_VENDOR - default "st-ericsson" - -config SYS_SOC - default "u8500" - -config SYS_CONFIG_NAME - default "snowball" - -endif diff --git a/board/st-ericsson/snowball/MAINTAINERS b/board/st-ericsson/snowball/MAINTAINERS deleted file mode 100644 index 132fc524ba..0000000000 --- a/board/st-ericsson/snowball/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -SNOWBALL BOARD -M: Mathieu Poirier -S: Maintained -F: board/st-ericsson/snowball/ -F: include/configs/snowball.h -F: configs/snowball_defconfig diff --git a/board/st-ericsson/snowball/Makefile b/board/st-ericsson/snowball/Makefile deleted file mode 100644 index f0605e2bcd..0000000000 --- a/board/st-ericsson/snowball/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Copyright (C) ST-Ericsson SA 2009 -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ccflags-y += -D__RELEASE -D__STN_8500 - -obj-y := snowball.o diff --git a/board/st-ericsson/snowball/db8500_pins.h b/board/st-ericsson/snowball/db8500_pins.h deleted file mode 100644 index e339cb86e2..0000000000 --- a/board/st-ericsson/snowball/db8500_pins.h +++ /dev/null @@ -1,745 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * Code ported from Nomadik GPIO driver in ST-Ericsson Linux kernel code. - * The purpose is that GPIO config found in kernel should work by simply - * copy-paste it to U-boot. - * - * Ported to U-boot by: - * Copyright (C) 2010 Joakim Axelsson - ** - * License terms: GNU General Public License, version 2 - * Author: Rabin Vincent - */ - -#ifndef __DB8500_PINS_H -#define __DB8500_PINS_H - -#include - -#define GPIO0_GPIO PIN_CFG(0, GPIO) -#define GPIO0_U0_CTSn PIN_CFG(0, ALT_A) -#define GPIO0_TRIG_OUT PIN_CFG(0, ALT_B) -#define GPIO0_IP_TDO PIN_CFG(0, ALT_C) - -#define GPIO1_GPIO PIN_CFG(1, GPIO) -#define GPIO1_U0_RTSn PIN_CFG(1, ALT_A) -#define GPIO1_TRIG_IN PIN_CFG(1, ALT_B) -#define GPIO1_IP_TDI PIN_CFG(1, ALT_C) - -#define GPIO2_GPIO PIN_CFG(2, GPIO) -#define GPIO2_U0_RXD PIN_CFG(2, ALT_A) -#define GPIO2_NONE PIN_CFG(2, ALT_B) -#define GPIO2_IP_TMS PIN_CFG(2, ALT_C) - -#define GPIO3_GPIO PIN_CFG(3, GPIO) -#define GPIO3_U0_TXD PIN_CFG(3, ALT_A) -#define GPIO3_NONE PIN_CFG(3, ALT_B) -#define GPIO3_IP_TCK PIN_CFG(3, ALT_C) - -#define GPIO4_GPIO PIN_CFG(4, GPIO) -#define GPIO4_U1_RXD PIN_CFG(4, ALT_A) -#define GPIO4_I2C4_SCL PIN_CFG_PULL(4, ALT_B, UP) -#define GPIO4_IP_TRSTn PIN_CFG(4, ALT_C) - -#define GPIO5_GPIO PIN_CFG(5, GPIO) -#define GPIO5_U1_TXD PIN_CFG(5, ALT_A) -#define GPIO5_I2C4_SDA PIN_CFG_PULL(5, ALT_B, UP) -#define GPIO5_IP_GPIO6 PIN_CFG(5, ALT_C) - -#define GPIO6_GPIO PIN_CFG(6, GPIO) -#define GPIO6_U1_CTSn PIN_CFG(6, ALT_A) -#define GPIO6_I2C1_SCL PIN_CFG_PULL(6, ALT_B, UP) -#define GPIO6_IP_GPIO0 PIN_CFG(6, ALT_C) - -#define GPIO7_GPIO PIN_CFG(7, GPIO) -#define GPIO7_U1_RTSn PIN_CFG(7, ALT_A) -#define GPIO7_I2C1_SDA PIN_CFG_PULL(7, ALT_B, UP) -#define GPIO7_IP_GPIO1 PIN_CFG(7, ALT_C) - -#define GPIO8_GPIO PIN_CFG(8, GPIO) -#define GPIO8_IPI2C_SDA PIN_CFG_PULL(8, ALT_A, UP) -#define GPIO8_I2C2_SDA PIN_CFG_PULL(8, ALT_B, UP) - -#define GPIO9_GPIO PIN_CFG(9, GPIO) -#define GPIO9_IPI2C_SCL PIN_CFG_PULL(9, ALT_A, UP) -#define GPIO9_I2C2_SCL PIN_CFG_PULL(9, ALT_B, UP) - -#define GPIO10_GPIO PIN_CFG(10, GPIO) -#define GPIO10_IPI2C_SDA PIN_CFG_PULL(10, ALT_A, UP) -#define GPIO10_I2C2_SDA PIN_CFG_PULL(10, ALT_B, UP) -#define GPIO10_IP_GPIO3 PIN_CFG(10, ALT_C) - -#define GPIO11_GPIO PIN_CFG(11, GPIO) -#define GPIO11_IPI2C_SCL PIN_CFG_PULL(11, ALT_A, UP) -#define GPIO11_I2C2_SCL PIN_CFG_PULL(11, ALT_B, UP) -#define GPIO11_IP_GPIO2 PIN_CFG(11, ALT_C) - -#define GPIO12_GPIO PIN_CFG(12, GPIO) -#define GPIO12_MSP0_TXD PIN_CFG(12, ALT_A) -#define GPIO12_MSP0_RXD PIN_CFG(12, ALT_B) - -#define GPIO13_GPIO PIN_CFG(13, GPIO) -#define GPIO13_MSP0_TFS PIN_CFG(13, ALT_A) - -#define GPIO14_GPIO PIN_CFG(14, GPIO) -#define GPIO14_MSP0_TCK PIN_CFG(14, ALT_A) - -#define GPIO15_GPIO PIN_CFG(15, GPIO) -#define GPIO15_MSP0_RXD PIN_CFG(15, ALT_A) -#define GPIO15_MSP0_TXD PIN_CFG(15, ALT_B) - -#define GPIO16_GPIO PIN_CFG(16, GPIO) -#define GPIO16_MSP0_RFS PIN_CFG(16, ALT_A) -#define GPIO16_I2C1_SCL PIN_CFG_PULL(16, ALT_B, UP) -#define GPIO16_SLIM0_DAT PIN_CFG(16, ALT_C) - -#define GPIO17_GPIO PIN_CFG(17, GPIO) -#define GPIO17_MSP0_RCK PIN_CFG(17, ALT_A) -#define GPIO17_I2C1_SDA PIN_CFG_PULL(17, ALT_B, UP) -#define GPIO17_SLIM0_CLK PIN_CFG(17, ALT_C) - -#define GPIO18_GPIO PIN_CFG(18, GPIO) -#define GPIO18_MC0_CMDDIR PIN_CFG(18, ALT_A) -#define GPIO18_U2_RXD PIN_CFG(18, ALT_B) -#define GPIO18_MS_IEP PIN_CFG(18, ALT_C) - -#define GPIO19_GPIO PIN_CFG(19, GPIO) -#define GPIO19_MC0_DAT0DIR PIN_CFG(19, ALT_A) -#define GPIO19_U2_TXD PIN_CFG(19, ALT_B) -#define GPIO19_MS_DAT0DIR PIN_CFG(19, ALT_C) - -#define GPIO20_GPIO PIN_CFG(20, GPIO) -#define GPIO20_MC0_DAT2DIR PIN_CFG(20, ALT_A) -#define GPIO20_UARTMOD_TXD PIN_CFG(20, ALT_B) -#define GPIO20_IP_TRIGOUT PIN_CFG(20, ALT_C) - -#define GPIO21_GPIO PIN_CFG(21, GPIO) -#define GPIO21_MC0_DAT31DIR PIN_CFG(21, ALT_A) -#define GPIO21_MSP0_SCK PIN_CFG(21, ALT_B) -#define GPIO21_MS_DAT31DIR PIN_CFG(21, ALT_C) - -#define GPIO22_GPIO PIN_CFG(22, GPIO) -#define GPIO22_MC0_FBCLK PIN_CFG(22, ALT_A) -#define GPIO22_UARTMOD_RXD PIN_CFG(22, ALT_B) -#define GPIO22_MS_FBCLK PIN_CFG(22, ALT_C) - -#define GPIO23_GPIO PIN_CFG(23, GPIO) -#define GPIO23_MC0_CLK PIN_CFG(23, ALT_A) -#define GPIO23_STMMOD_CLK PIN_CFG(23, ALT_B) -#define GPIO23_MS_CLK PIN_CFG(23, ALT_C) - -#define GPIO24_GPIO PIN_CFG(24, GPIO) -#define GPIO24_MC0_CMD PIN_CFG(24, ALT_A) -#define GPIO24_UARTMOD_RXD PIN_CFG(24, ALT_B) -#define GPIO24_MS_BS PIN_CFG(24, ALT_C) - -#define GPIO25_GPIO PIN_CFG(25, GPIO) -#define GPIO25_MC0_DAT0 PIN_CFG(25, ALT_A) -#define GPIO25_STMMOD_DAT0 PIN_CFG(25, ALT_B) -#define GPIO25_MS_DAT0 PIN_CFG(25, ALT_C) - -#define GPIO26_GPIO PIN_CFG(26, GPIO) -#define GPIO26_MC0_DAT1 PIN_CFG(26, ALT_A) -#define GPIO26_STMMOD_DAT1 PIN_CFG(26, ALT_B) -#define GPIO26_MS_DAT1 PIN_CFG(26, ALT_C) - -#define GPIO27_GPIO PIN_CFG(27, GPIO) -#define GPIO27_MC0_DAT2 PIN_CFG(27, ALT_A) -#define GPIO27_STMMOD_DAT2 PIN_CFG(27, ALT_B) -#define GPIO27_MS_DAT2 PIN_CFG(27, ALT_C) - -#define GPIO28_GPIO PIN_CFG(28, GPIO) -#define GPIO28_MC0_DAT3 PIN_CFG(28, ALT_A) -#define GPIO28_STMMOD_DAT3 PIN_CFG(28, ALT_B) -#define GPIO28_MS_DAT3 PIN_CFG(28, ALT_C) - -#define GPIO29_GPIO PIN_CFG(29, GPIO) -#define GPIO29_MC0_DAT4 PIN_CFG(29, ALT_A) -#define GPIO29_SPI3_CLK PIN_CFG(29, ALT_B) -#define GPIO29_U2_RXD PIN_CFG(29, ALT_C) - -#define GPIO30_GPIO PIN_CFG(30, GPIO) -#define GPIO30_MC0_DAT5 PIN_CFG(30, ALT_A) -#define GPIO30_SPI3_RXD PIN_CFG(30, ALT_B) -#define GPIO30_U2_TXD PIN_CFG(30, ALT_C) - -#define GPIO31_GPIO PIN_CFG(31, GPIO) -#define GPIO31_MC0_DAT6 PIN_CFG(31, ALT_A) -#define GPIO31_SPI3_FRM PIN_CFG(31, ALT_B) -#define GPIO31_U2_CTSn PIN_CFG(31, ALT_C) - -#define GPIO32_GPIO PIN_CFG(32, GPIO) -#define GPIO32_MC0_DAT7 PIN_CFG(32, ALT_A) -#define GPIO32_SPI3_TXD PIN_CFG(32, ALT_B) -#define GPIO32_U2_RTSn PIN_CFG(32, ALT_C) - -#define GPIO33_GPIO PIN_CFG(33, GPIO) -#define GPIO33_MSP1_TXD PIN_CFG(33, ALT_A) -#define GPIO33_MSP1_RXD PIN_CFG(33, ALT_B) -#define GPIO33_U0_DTRn PIN_CFG(33, ALT_C) - -#define GPIO34_GPIO PIN_CFG(34, GPIO) -#define GPIO34_MSP1_TFS PIN_CFG(34, ALT_A) -#define GPIO34_NONE PIN_CFG(34, ALT_B) -#define GPIO34_U0_DCDn PIN_CFG(34, ALT_C) - -#define GPIO35_GPIO PIN_CFG(35, GPIO) -#define GPIO35_MSP1_TCK PIN_CFG(35, ALT_A) -#define GPIO35_NONE PIN_CFG(35, ALT_B) -#define GPIO35_U0_DSRn PIN_CFG(35, ALT_C) - -#define GPIO36_GPIO PIN_CFG(36, GPIO) -#define GPIO36_MSP1_RXD PIN_CFG(36, ALT_A) -#define GPIO36_MSP1_TXD PIN_CFG(36, ALT_B) -#define GPIO36_U0_RIn PIN_CFG(36, ALT_C) - -#define GPIO64_GPIO PIN_CFG(64, GPIO) -#define GPIO64_LCDB_DE PIN_CFG(64, ALT_A) -#define GPIO64_KP_O1 PIN_CFG(64, ALT_B) -#define GPIO64_IP_GPIO4 PIN_CFG(64, ALT_C) - -#define GPIO65_GPIO PIN_CFG(65, GPIO) -#define GPIO65_LCDB_HSO PIN_CFG(65, ALT_A) -#define GPIO65_KP_O0 PIN_CFG(65, ALT_B) -#define GPIO65_IP_GPIO5 PIN_CFG(65, ALT_C) - -#define GPIO66_GPIO PIN_CFG(66, GPIO) -#define GPIO66_LCDB_VSO PIN_CFG(66, ALT_A) -#define GPIO66_KP_I1 PIN_CFG(66, ALT_B) -#define GPIO66_IP_GPIO6 PIN_CFG(66, ALT_C) - -#define GPIO67_GPIO PIN_CFG(67, GPIO) -#define GPIO67_LCDB_CLK PIN_CFG(67, ALT_A) -#define GPIO67_KP_I0 PIN_CFG(67, ALT_B) -#define GPIO67_IP_GPIO7 PIN_CFG(67, ALT_C) - -#define GPIO68_GPIO PIN_CFG(68, GPIO) -#define GPIO68_LCD_VSI0 PIN_CFG(68, ALT_A) -#define GPIO68_KP_O7 PIN_CFG(68, ALT_B) -#define GPIO68_SM_CLE PIN_CFG(68, ALT_C) - -#define GPIO69_GPIO PIN_CFG(69, GPIO) -#define GPIO69_LCD_VSI1 PIN_CFG(69, ALT_A) -#define GPIO69_KP_I7 PIN_CFG(69, ALT_B) -#define GPIO69_SM_ALE PIN_CFG(69, ALT_C) - -#define GPIO70_GPIO PIN_CFG(70, GPIO) -#define GPIO70_LCD_D0 PIN_CFG(70, ALT_A) -#define GPIO70_KP_O5 PIN_CFG(70, ALT_B) -#define GPIO70_STMAPE_CLK PIN_CFG(70, ALT_C) - -#define GPIO71_GPIO PIN_CFG(71, GPIO) -#define GPIO71_LCD_D1 PIN_CFG(71, ALT_A) -#define GPIO71_KP_O4 PIN_CFG(71, ALT_B) -#define GPIO71_STMAPE_DAT3 PIN_CFG(71, ALT_C) - -#define GPIO72_GPIO PIN_CFG(72, GPIO) -#define GPIO72_LCD_D2 PIN_CFG(72, ALT_A) -#define GPIO72_KP_O3 PIN_CFG(72, ALT_B) -#define GPIO72_STMAPE_DAT2 PIN_CFG(72, ALT_C) - -#define GPIO73_GPIO PIN_CFG(73, GPIO) -#define GPIO73_LCD_D3 PIN_CFG(73, ALT_A) -#define GPIO73_KP_O2 PIN_CFG(73, ALT_B) -#define GPIO73_STMAPE_DAT1 PIN_CFG(73, ALT_C) - -#define GPIO74_GPIO PIN_CFG(74, GPIO) -#define GPIO74_LCD_D4 PIN_CFG(74, ALT_A) -#define GPIO74_KP_I5 PIN_CFG(74, ALT_B) -#define GPIO74_STMAPE_DAT0 PIN_CFG(74, ALT_C) - -#define GPIO75_GPIO PIN_CFG(75, GPIO) -#define GPIO75_LCD_D5 PIN_CFG(75, ALT_A) -#define GPIO75_KP_I4 PIN_CFG(75, ALT_B) -#define GPIO75_U2_RXD PIN_CFG(75, ALT_C) - -#define GPIO76_GPIO PIN_CFG(76, GPIO) -#define GPIO76_LCD_D6 PIN_CFG(76, ALT_A) -#define GPIO76_KP_I3 PIN_CFG(76, ALT_B) -#define GPIO76_U2_TXD PIN_CFG(76, ALT_C) - -#define GPIO77_GPIO PIN_CFG(77, GPIO) -#define GPIO77_LCD_D7 PIN_CFG(77, ALT_A) -#define GPIO77_KP_I2 PIN_CFG(77, ALT_B) -#define GPIO77_NONE PIN_CFG(77, ALT_C) - -#define GPIO78_GPIO PIN_CFG(78, GPIO) -#define GPIO78_LCD_D8 PIN_CFG(78, ALT_A) -#define GPIO78_KP_O6 PIN_CFG(78, ALT_B) -#define GPIO78_IP_GPIO2 PIN_CFG(78, ALT_C) - -#define GPIO79_GPIO PIN_CFG(79, GPIO) -#define GPIO79_LCD_D9 PIN_CFG(79, ALT_A) -#define GPIO79_KP_I6 PIN_CFG(79, ALT_B) -#define GPIO79_IP_GPIO3 PIN_CFG(79, ALT_C) - -#define GPIO80_GPIO PIN_CFG(80, GPIO) -#define GPIO80_LCD_D10 PIN_CFG(80, ALT_A) -#define GPIO80_KP_SKA0 PIN_CFG(80, ALT_B) -#define GPIO80_IP_GPIO4 PIN_CFG(80, ALT_C) - -#define GPIO81_GPIO PIN_CFG(81, GPIO) -#define GPIO81_LCD_D11 PIN_CFG(81, ALT_A) -#define GPIO81_KP_SKB0 PIN_CFG(81, ALT_B) -#define GPIO81_IP_GPIO5 PIN_CFG(81, ALT_C) - -#define GPIO82_GPIO PIN_CFG(82, GPIO) -#define GPIO82_LCD_D12 PIN_CFG(82, ALT_A) -#define GPIO82_KP_O5 PIN_CFG(82, ALT_B) - -#define GPIO83_GPIO PIN_CFG(83, GPIO) -#define GPIO83_LCD_D13 PIN_CFG(83, ALT_A) -#define GPIO83_KP_O4 PIN_CFG(83, ALT_B) - -#define GPIO84_GPIO PIN_CFG_PULL(84, GPIO, UP) -#define GPIO84_LCD_D14 PIN_CFG(84, ALT_A) -#define GPIO84_KP_I5 PIN_CFG(84, ALT_B) - -#define GPIO85_GPIO PIN_CFG(85, GPIO) -#define GPIO85_LCD_D15 PIN_CFG(85, ALT_A) -#define GPIO85_KP_I4 PIN_CFG(85, ALT_B) - -#define GPIO86_GPIO PIN_CFG(86, GPIO) -#define GPIO86_LCD_D16 PIN_CFG(86, ALT_A) -#define GPIO86_SM_ADQ0 PIN_CFG(86, ALT_B) -#define GPIO86_MC5_DAT0 PIN_CFG(86, ALT_C) - -#define GPIO87_GPIO PIN_CFG(87, GPIO) -#define GPIO87_LCD_D17 PIN_CFG(87, ALT_A) -#define GPIO87_SM_ADQ1 PIN_CFG(87, ALT_B) -#define GPIO87_MC5_DAT1 PIN_CFG(87, ALT_C) - -#define GPIO88_GPIO PIN_CFG(88, GPIO) -#define GPIO88_LCD_D18 PIN_CFG(88, ALT_A) -#define GPIO88_SM_ADQ2 PIN_CFG(88, ALT_B) -#define GPIO88_MC5_DAT2 PIN_CFG(88, ALT_C) - -#define GPIO89_GPIO PIN_CFG(89, GPIO) -#define GPIO89_LCD_D19 PIN_CFG(89, ALT_A) -#define GPIO89_SM_ADQ3 PIN_CFG(89, ALT_B) -#define GPIO89_MC5_DAT3 PIN_CFG(89, ALT_C) - -#define GPIO90_GPIO PIN_CFG(90, GPIO) -#define GPIO90_LCD_D20 PIN_CFG(90, ALT_A) -#define GPIO90_SM_ADQ4 PIN_CFG(90, ALT_B) -#define GPIO90_MC5_CMD PIN_CFG(90, ALT_C) - -#define GPIO91_GPIO PIN_CFG(91, GPIO) -#define GPIO91_LCD_D21 PIN_CFG(91, ALT_A) -#define GPIO91_SM_ADQ5 PIN_CFG(91, ALT_B) -#define GPIO91_MC5_FBCLK PIN_CFG(91, ALT_C) - -#define GPIO92_GPIO PIN_CFG(92, GPIO) -#define GPIO92_LCD_D22 PIN_CFG(92, ALT_A) -#define GPIO92_SM_ADQ6 PIN_CFG(92, ALT_B) -#define GPIO92_MC5_CLK PIN_CFG(92, ALT_C) - -#define GPIO93_GPIO PIN_CFG(93, GPIO) -#define GPIO93_LCD_D23 PIN_CFG(93, ALT_A) -#define GPIO93_SM_ADQ7 PIN_CFG(93, ALT_B) -#define GPIO93_MC5_DAT4 PIN_CFG(93, ALT_C) - -#define GPIO94_GPIO PIN_CFG(94, GPIO) -#define GPIO94_KP_O7 PIN_CFG(94, ALT_A) -#define GPIO94_SM_ADVn PIN_CFG(94, ALT_B) -#define GPIO94_MC5_DAT5 PIN_CFG(94, ALT_C) - -#define GPIO95_GPIO PIN_CFG(95, GPIO) -#define GPIO95_KP_I7 PIN_CFG(95, ALT_A) -#define GPIO95_SM_CS0n PIN_CFG(95, ALT_B) -#define GPIO95_SM_PS0n PIN_CFG(95, ALT_C) - -#define GPIO96_GPIO PIN_CFG(96, GPIO) -#define GPIO96_KP_O6 PIN_CFG(96, ALT_A) -#define GPIO96_SM_OEn PIN_CFG(96, ALT_B) -#define GPIO96_MC5_DAT6 PIN_CFG(96, ALT_C) - -#define GPIO97_GPIO PIN_CFG(97, GPIO) -#define GPIO97_KP_I6 PIN_CFG(97, ALT_A) -#define GPIO97_SM_WEn PIN_CFG(97, ALT_B) -#define GPIO97_MC5_DAT7 PIN_CFG(97, ALT_C) - -#define GPIO128_GPIO PIN_CFG(128, GPIO) -#define GPIO128_MC2_CLK PIN_CFG(128, ALT_A) -#define GPIO128_SM_CKO PIN_CFG(128, ALT_B) - -#define GPIO129_GPIO PIN_CFG(129, GPIO) -#define GPIO129_MC2_CMD PIN_CFG(129, ALT_A) -#define GPIO129_SM_WAIT0n PIN_CFG(129, ALT_B) - -#define GPIO130_GPIO PIN_CFG(130, GPIO) -#define GPIO130_MC2_FBCLK PIN_CFG(130, ALT_A) -#define GPIO130_SM_FBCLK PIN_CFG(130, ALT_B) -#define GPIO130_MC2_RSTN PIN_CFG(130, ALT_C) - -#define GPIO131_GPIO PIN_CFG(131, GPIO) -#define GPIO131_MC2_DAT0 PIN_CFG(131, ALT_A) -#define GPIO131_SM_ADQ8 PIN_CFG(131, ALT_B) - -#define GPIO132_GPIO PIN_CFG(132, GPIO) -#define GPIO132_MC2_DAT1 PIN_CFG(132, ALT_A) -#define GPIO132_SM_ADQ9 PIN_CFG(132, ALT_B) - -#define GPIO133_GPIO PIN_CFG(133, GPIO) -#define GPIO133_MC2_DAT2 PIN_CFG(133, ALT_A) -#define GPIO133_SM_ADQ10 PIN_CFG(133, ALT_B) - -#define GPIO134_GPIO PIN_CFG(134, GPIO) -#define GPIO134_MC2_DAT3 PIN_CFG(134, ALT_A) -#define GPIO134_SM_ADQ11 PIN_CFG(134, ALT_B) - -#define GPIO135_GPIO PIN_CFG(135, GPIO) -#define GPIO135_MC2_DAT4 PIN_CFG(135, ALT_A) -#define GPIO135_SM_ADQ12 PIN_CFG(135, ALT_B) - -#define GPIO136_GPIO PIN_CFG(136, GPIO) -#define GPIO136_MC2_DAT5 PIN_CFG(136, ALT_A) -#define GPIO136_SM_ADQ13 PIN_CFG(136, ALT_B) - -#define GPIO137_GPIO PIN_CFG(137, GPIO) -#define GPIO137_MC2_DAT6 PIN_CFG(137, ALT_A) -#define GPIO137_SM_ADQ14 PIN_CFG(137, ALT_B) - -#define GPIO138_GPIO PIN_CFG(138, GPIO) -#define GPIO138_MC2_DAT7 PIN_CFG(138, ALT_A) -#define GPIO138_SM_ADQ15 PIN_CFG(138, ALT_B) - -#define GPIO139_GPIO PIN_CFG(139, GPIO) -#define GPIO139_SSP1_RXD PIN_CFG(139, ALT_A) -#define GPIO139_SM_WAIT1n PIN_CFG(139, ALT_B) -#define GPIO139_KP_O8 PIN_CFG(139, ALT_C) - -#define GPIO140_GPIO PIN_CFG(140, GPIO) -#define GPIO140_SSP1_TXD PIN_CFG(140, ALT_A) -#define GPIO140_IP_GPIO7 PIN_CFG(140, ALT_B) -#define GPIO140_KP_SKA1 PIN_CFG(140, ALT_C) - -#define GPIO141_GPIO PIN_CFG(141, GPIO) -#define GPIO141_SSP1_CLK PIN_CFG(141, ALT_A) -#define GPIO141_IP_GPIO2 PIN_CFG(141, ALT_B) -#define GPIO141_KP_O9 PIN_CFG(141, ALT_C) - -#define GPIO142_GPIO PIN_CFG(142, GPIO) -#define GPIO142_SSP1_FRM PIN_CFG(142, ALT_A) -#define GPIO142_IP_GPIO3 PIN_CFG(142, ALT_B) -#define GPIO142_KP_SKB1 PIN_CFG(142, ALT_C) - -#define GPIO143_GPIO PIN_CFG(143, GPIO) -#define GPIO143_SSP0_CLK PIN_CFG(143, ALT_A) - -#define GPIO144_GPIO PIN_CFG(144, GPIO) -#define GPIO144_SSP0_FRM PIN_CFG(144, ALT_A) - -#define GPIO145_GPIO PIN_CFG(145, GPIO) -#define GPIO145_SSP0_RXD PIN_CFG(145, ALT_A) - -#define GPIO146_GPIO PIN_CFG(146, GPIO) -#define GPIO146_SSP0_TXD PIN_CFG(146, ALT_A) - -#define GPIO147_GPIO PIN_CFG(147, GPIO) -#define GPIO147_I2C0_SCL PIN_CFG_PULL(147, ALT_A, UP) - -#define GPIO148_GPIO PIN_CFG(148, GPIO) -#define GPIO148_I2C0_SDA PIN_CFG_PULL(148, ALT_A, UP) - -#define GPIO149_GPIO PIN_CFG(149, GPIO) -#define GPIO149_IP_GPIO0 PIN_CFG(149, ALT_A) -#define GPIO149_SM_CS1n PIN_CFG(149, ALT_B) -#define GPIO149_SM_PS1n PIN_CFG(149, ALT_C) - -#define GPIO150_GPIO PIN_CFG(150, GPIO) -#define GPIO150_IP_GPIO1 PIN_CFG(150, ALT_A) -#define GPIO150_LCDA_CLK PIN_CFG(150, ALT_B) - -#define GPIO151_GPIO PIN_CFG(151, GPIO) -#define GPIO151_KP_SKA0 PIN_CFG(151, ALT_A) -#define GPIO151_LCD_VSI0 PIN_CFG(151, ALT_B) -#define GPIO151_KP_O8 PIN_CFG(151, ALT_C) - -#define GPIO152_GPIO PIN_CFG(152, GPIO) -#define GPIO152_KP_SKB0 PIN_CFG(152, ALT_A) -#define GPIO152_LCD_VSI1 PIN_CFG(152, ALT_B) -#define GPIO152_KP_O9 PIN_CFG(152, ALT_C) - -#define GPIO153_GPIO PIN_CFG(153, GPIO) -#define GPIO153_KP_I7 PIN_CFG_PULL(153, ALT_A, DOWN) -#define GPIO153_LCD_D24 PIN_CFG(153, ALT_B) -#define GPIO153_U2_RXD PIN_CFG(153, ALT_C) - -#define GPIO154_GPIO PIN_CFG(154, GPIO) -#define GPIO154_KP_I6 PIN_CFG_PULL(154, ALT_A, DOWN) -#define GPIO154_LCD_D25 PIN_CFG(154, ALT_B) -#define GPIO154_U2_TXD PIN_CFG(154, ALT_C) - -#define GPIO155_GPIO PIN_CFG(155, GPIO) -#define GPIO155_KP_I5 PIN_CFG_PULL(155, ALT_A, DOWN) -#define GPIO155_LCD_D26 PIN_CFG(155, ALT_B) -#define GPIO155_STMAPE_CLK PIN_CFG(155, ALT_C) - -#define GPIO156_GPIO PIN_CFG(156, GPIO) -#define GPIO156_KP_I4 PIN_CFG_PULL(156, ALT_A, DOWN) -#define GPIO156_LCD_D27 PIN_CFG(156, ALT_B) -#define GPIO156_STMAPE_DAT3 PIN_CFG(156, ALT_C) - -#define GPIO157_GPIO PIN_CFG(157, GPIO) -#define GPIO157_KP_O7 PIN_CFG_PULL(157, ALT_A, UP) -#define GPIO157_LCD_D28 PIN_CFG(157, ALT_B) -#define GPIO157_STMAPE_DAT2 PIN_CFG(157, ALT_C) - -#define GPIO158_GPIO PIN_CFG(158, GPIO) -#define GPIO158_KP_O6 PIN_CFG_PULL(158, ALT_A, UP) -#define GPIO158_LCD_D29 PIN_CFG(158, ALT_B) -#define GPIO158_STMAPE_DAT1 PIN_CFG(158, ALT_C) - -#define GPIO159_GPIO PIN_CFG(159, GPIO) -#define GPIO159_KP_O5 PIN_CFG_PULL(159, ALT_A, UP) -#define GPIO159_LCD_D30 PIN_CFG(159, ALT_B) -#define GPIO159_STMAPE_DAT0 PIN_CFG(159, ALT_C) - -#define GPIO160_GPIO PIN_CFG(160, GPIO) -#define GPIO160_KP_O4 PIN_CFG_PULL(160, ALT_A, UP) -#define GPIO160_LCD_D31 PIN_CFG(160, ALT_B) -#define GPIO160_NONE PIN_CFG(160, ALT_C) - -#define GPIO161_GPIO PIN_CFG(161, GPIO) -#define GPIO161_KP_I3 PIN_CFG_PULL(161, ALT_A, DOWN) -#define GPIO161_LCD_D32 PIN_CFG(161, ALT_B) -#define GPIO161_UARTMOD_RXD PIN_CFG(161, ALT_C) - -#define GPIO162_GPIO PIN_CFG(162, GPIO) -#define GPIO162_KP_I2 PIN_CFG_PULL(162, ALT_A, DOWN) -#define GPIO162_LCD_D33 PIN_CFG(162, ALT_B) -#define GPIO162_UARTMOD_TXD PIN_CFG(162, ALT_C) - -#define GPIO163_GPIO PIN_CFG(163, GPIO) -#define GPIO163_KP_I1 PIN_CFG_PULL(163, ALT_A, DOWN) -#define GPIO163_LCD_D34 PIN_CFG(163, ALT_B) -#define GPIO163_STMMOD_CLK PIN_CFG(163, ALT_C) - -#define GPIO164_GPIO PIN_CFG(164, GPIO) -#define GPIO164_KP_I0 PIN_CFG_PULL(164, ALT_A, UP) -#define GPIO164_LCD_D35 PIN_CFG(164, ALT_B) -#define GPIO164_STMMOD_DAT3 PIN_CFG(164, ALT_C) - -#define GPIO165_GPIO PIN_CFG(165, GPIO) -#define GPIO165_KP_O3 PIN_CFG_PULL(165, ALT_A, UP) -#define GPIO165_LCD_D36 PIN_CFG(165, ALT_B) -#define GPIO165_STMMOD_DAT2 PIN_CFG(165, ALT_C) - -#define GPIO166_GPIO PIN_CFG(166, GPIO) -#define GPIO166_KP_O2 PIN_CFG_PULL(166, ALT_A, UP) -#define GPIO166_LCD_D37 PIN_CFG(166, ALT_B) -#define GPIO166_STMMOD_DAT1 PIN_CFG(166, ALT_C) - -#define GPIO167_GPIO PIN_CFG(167, GPIO) -#define GPIO167_KP_O1 PIN_CFG_PULL(167, ALT_A, UP) -#define GPIO167_LCD_D38 PIN_CFG(167, ALT_B) -#define GPIO167_STMMOD_DAT0 PIN_CFG(167, ALT_C) - -#define GPIO168_GPIO PIN_CFG(168, GPIO) -#define GPIO168_KP_O0 PIN_CFG_PULL(168, ALT_A, UP) -#define GPIO168_LCD_D39 PIN_CFG(168, ALT_B) -#define GPIO168_NONE PIN_CFG(168, ALT_C) - -#define GPIO169_GPIO PIN_CFG(169, GPIO) -#define GPIO169_RF_PURn PIN_CFG(169, ALT_A) -#define GPIO169_LCDA_DE PIN_CFG(169, ALT_B) -#define GPIO169_USBSIM_PDC PIN_CFG(169, ALT_C) - -#define GPIO170_GPIO PIN_CFG(170, GPIO) -#define GPIO170_MODEM_STATE PIN_CFG(170, ALT_A) -#define GPIO170_LCDA_VSO PIN_CFG(170, ALT_B) -#define GPIO170_KP_SKA1 PIN_CFG(170, ALT_C) - -#define GPIO171_GPIO PIN_CFG(171, GPIO) -#define GPIO171_MODEM_PWREN PIN_CFG(171, ALT_A) -#define GPIO171_LCDA_HSO PIN_CFG(171, ALT_B) -#define GPIO171_KP_SKB1 PIN_CFG(171, ALT_C) - -#define GPIO192_GPIO PIN_CFG(192, GPIO) -#define GPIO192_MSP2_SCK PIN_CFG(192, ALT_A) - -#define GPIO193_GPIO PIN_CFG(193, GPIO) -#define GPIO193_MSP2_TXD PIN_CFG(193, ALT_A) - -#define GPIO194_GPIO PIN_CFG(194, GPIO) -#define GPIO194_MSP2_TCK PIN_CFG(194, ALT_A) - -#define GPIO195_GPIO PIN_CFG(195, GPIO) -#define GPIO195_MSP2_TFS PIN_CFG(195, ALT_A) - -#define GPIO196_GPIO PIN_CFG(196, GPIO) -#define GPIO196_MSP2_RXD PIN_CFG(196, ALT_A) - -#define GPIO197_GPIO PIN_CFG(197, GPIO) -#define GPIO197_MC4_DAT3 PIN_CFG(197, ALT_A) - -#define GPIO198_GPIO PIN_CFG(198, GPIO) -#define GPIO198_MC4_DAT2 PIN_CFG(198, ALT_A) - -#define GPIO199_GPIO PIN_CFG(199, GPIO) -#define GPIO199_MC4_DAT1 PIN_CFG(199, ALT_A) - -#define GPIO200_GPIO PIN_CFG(200, GPIO) -#define GPIO200_MC4_DAT0 PIN_CFG(200, ALT_A) - -#define GPIO201_GPIO PIN_CFG(201, GPIO) -#define GPIO201_MC4_CMD PIN_CFG(201, ALT_A) - -#define GPIO202_GPIO PIN_CFG(202, GPIO) -#define GPIO202_MC4_FBCLK PIN_CFG(202, ALT_A) -#define GPIO202_PWL PIN_CFG(202, ALT_B) -#define GPIO202_MC4_RSTN PIN_CFG(202, ALT_C) - -#define GPIO203_GPIO PIN_CFG(203, GPIO) -#define GPIO203_MC4_CLK PIN_CFG(203, ALT_A) - -#define GPIO204_GPIO PIN_CFG(204, GPIO) -#define GPIO204_MC4_DAT7 PIN_CFG(204, ALT_A) - -#define GPIO205_GPIO PIN_CFG(205, GPIO) -#define GPIO205_MC4_DAT6 PIN_CFG(205, ALT_A) - -#define GPIO206_GPIO PIN_CFG(206, GPIO) -#define GPIO206_MC4_DAT5 PIN_CFG(206, ALT_A) - -#define GPIO207_GPIO PIN_CFG(207, GPIO) -#define GPIO207_MC4_DAT4 PIN_CFG(207, ALT_A) - -#define GPIO208_GPIO PIN_CFG(208, GPIO) -#define GPIO208_MC1_CLK PIN_CFG(208, ALT_A) - -#define GPIO209_GPIO PIN_CFG(209, GPIO) -#define GPIO209_MC1_FBCLK PIN_CFG(209, ALT_A) -#define GPIO209_SPI1_CLK PIN_CFG(209, ALT_B) - -#define GPIO210_GPIO PIN_CFG(210, GPIO) -#define GPIO210_MC1_CMD PIN_CFG(210, ALT_A) - -#define GPIO211_GPIO PIN_CFG(211, GPIO) -#define GPIO211_MC1_DAT0 PIN_CFG(211, ALT_A) - -#define GPIO212_GPIO PIN_CFG(212, GPIO) -#define GPIO212_MC1_DAT1 PIN_CFG(212, ALT_A) -#define GPIO212_SPI1_FRM PIN_CFG(212, ALT_B) - -#define GPIO213_GPIO PIN_CFG(213, GPIO) -#define GPIO213_MC1_DAT2 PIN_CFG(213, ALT_A) -#define GPIO213_SPI1_TXD PIN_CFG(213, ALT_B) - -#define GPIO214_GPIO PIN_CFG(214, GPIO) -#define GPIO214_MC1_DAT3 PIN_CFG(214, ALT_A) -#define GPIO214_SPI1_RXD PIN_CFG(214, ALT_B) - -#define GPIO215_GPIO PIN_CFG(215, GPIO) -#define GPIO215_MC1_CMDDIR PIN_CFG(215, ALT_A) -#define GPIO215_MC3_DAT2DIR PIN_CFG(215, ALT_B) -#define GPIO215_CLKOUT1 PIN_CFG(215, ALT_C) - -#define GPIO216_GPIO PIN_CFG(216, GPIO) -#define GPIO216_MC1_DAT2DIR PIN_CFG(216, ALT_A) -#define GPIO216_MC3_CMDDIR PIN_CFG(216, ALT_B) -#define GPIO216_I2C3_SDA PIN_CFG_PULL(216, ALT_C, UP) - -#define GPIO217_GPIO PIN_CFG(217, GPIO) -#define GPIO217_MC1_DAT0DIR PIN_CFG(217, ALT_A) -#define GPIO217_MC3_DAT31DIR PIN_CFG(217, ALT_B) -#define GPIO217_CLKOUT2 PIN_CFG(217, ALT_C) - -#define GPIO218_GPIO PIN_CFG(218, GPIO) -#define GPIO218_MC1_DAT31DIR PIN_CFG(218, ALT_A) -#define GPIO218_MC3_DAT0DIR PIN_CFG(218, ALT_B) -#define GPIO218_I2C3_SCL PIN_CFG_PULL(218, ALT_C, UP) - -#define GPIO219_GPIO PIN_CFG(219, GPIO) -#define GPIO219_HSIR_FLA0 PIN_CFG(219, ALT_A) -#define GPIO219_MC3_CLK PIN_CFG(219, ALT_B) - -#define GPIO220_GPIO PIN_CFG(220, GPIO) -#define GPIO220_HSIR_DAT0 PIN_CFG(220, ALT_A) -#define GPIO220_MC3_FBCLK PIN_CFG(220, ALT_B) -#define GPIO220_SPI0_CLK PIN_CFG(220, ALT_C) - -#define GPIO221_GPIO PIN_CFG(221, GPIO) -#define GPIO221_HSIR_RDY0 PIN_CFG(221, ALT_A) -#define GPIO221_MC3_CMD PIN_CFG(221, ALT_B) - -#define GPIO222_GPIO PIN_CFG(222, GPIO) -#define GPIO222_HSIT_FLA0 PIN_CFG(222, ALT_A) -#define GPIO222_MC3_DAT0 PIN_CFG(222, ALT_B) - -#define GPIO223_GPIO PIN_CFG(223, GPIO) -#define GPIO223_HSIT_DAT0 PIN_CFG(223, ALT_A) -#define GPIO223_MC3_DAT1 PIN_CFG(223, ALT_B) -#define GPIO223_SPI0_FRM PIN_CFG(223, ALT_C) - -#define GPIO224_GPIO PIN_CFG(224, GPIO) -#define GPIO224_HSIT_RDY0 PIN_CFG(224, ALT_A) -#define GPIO224_MC3_DAT2 PIN_CFG(224, ALT_B) -#define GPIO224_SPI0_TXD PIN_CFG(224, ALT_C) - -#define GPIO225_GPIO PIN_CFG(225, GPIO) -#define GPIO225_HSIT_CAWAKE0 PIN_CFG(225, ALT_A) -#define GPIO225_MC3_DAT3 PIN_CFG(225, ALT_B) -#define GPIO225_SPI0_RXD PIN_CFG(225, ALT_C) - -#define GPIO226_GPIO PIN_CFG(226, GPIO) -#define GPIO226_HSIT_ACWAKE0 PIN_CFG(226, ALT_A) -#define GPIO226_PWL PIN_CFG(226, ALT_B) -#define GPIO226_USBSIM_PDC PIN_CFG(226, ALT_C) - -#define GPIO227_GPIO PIN_CFG(227, GPIO) -#define GPIO227_CLKOUT1 PIN_CFG(227, ALT_A) - -#define GPIO228_GPIO PIN_CFG(228, GPIO) -#define GPIO228_CLKOUT2 PIN_CFG(228, ALT_A) - -#define GPIO229_GPIO PIN_CFG(229, GPIO) -#define GPIO229_CLKOUT1 PIN_CFG(229, ALT_A) -#define GPIO229_PWL PIN_CFG(229, ALT_B) -#define GPIO229_I2C3_SDA PIN_CFG_PULL(229, ALT_C, UP) - -#define GPIO230_GPIO PIN_CFG(230, GPIO) -#define GPIO230_CLKOUT2 PIN_CFG(230, ALT_A) -#define GPIO230_PWL PIN_CFG(230, ALT_B) -#define GPIO230_I2C3_SCL PIN_CFG_PULL(230, ALT_C, UP) - -#define GPIO256_GPIO PIN_CFG(256, GPIO) -#define GPIO256_USB_NXT PIN_CFG(256, ALT_A) - -#define GPIO257_GPIO PIN_CFG(257, GPIO) -#define GPIO257_USB_STP PIN_CFG(257, ALT_A) - -#define GPIO258_GPIO PIN_CFG(258, GPIO) -#define GPIO258_USB_XCLK PIN_CFG(258, ALT_A) -#define GPIO258_NONE PIN_CFG(258, ALT_B) -#define GPIO258_DDR_TRIG PIN_CFG(258, ALT_C) - -#define GPIO259_GPIO PIN_CFG(259, GPIO) -#define GPIO259_USB_DIR PIN_CFG(259, ALT_A) - -#define GPIO260_GPIO PIN_CFG(260, GPIO) -#define GPIO260_USB_DAT7 PIN_CFG(260, ALT_A) - -#define GPIO261_GPIO PIN_CFG(261, GPIO) -#define GPIO261_USB_DAT6 PIN_CFG(261, ALT_A) - -#define GPIO262_GPIO PIN_CFG(262, GPIO) -#define GPIO262_USB_DAT5 PIN_CFG(262, ALT_A) - -#define GPIO263_GPIO PIN_CFG(263, GPIO) -#define GPIO263_USB_DAT4 PIN_CFG(263, ALT_A) - -#define GPIO264_GPIO PIN_CFG(264, GPIO) -#define GPIO264_USB_DAT3 PIN_CFG(264, ALT_A) - -#define GPIO265_GPIO PIN_CFG(265, GPIO) -#define GPIO265_USB_DAT2 PIN_CFG(265, ALT_A) - -#define GPIO266_GPIO PIN_CFG(266, GPIO) -#define GPIO266_USB_DAT1 PIN_CFG(266, ALT_A) - -#define GPIO267_GPIO PIN_CFG(267, GPIO) -#define GPIO267_USB_DAT0 PIN_CFG(267, ALT_A) - -#endif diff --git a/board/st-ericsson/snowball/snowball.c b/board/st-ericsson/snowball/snowball.c deleted file mode 100644 index c3061e20d9..0000000000 --- a/board/st-ericsson/snowball/snowball.c +++ /dev/null @@ -1,340 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2009 - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_MMC -#include "../../../drivers/mmc/arm_pl180_mmci.h" -#endif -#include "db8500_pins.h" - -/* - * Get a global data pointer - */ -DECLARE_GLOBAL_DATA_PTR; - -/* - * Memory controller register - */ -#define DMC_BASE_ADDR 0x80156000 -#define DMC_CTL_97 (DMC_BASE_ADDR + 0x184) - -/* - * GPIO pin config common for MOP500/HREF boards - */ -unsigned long gpio_cfg_common[] = { - /* I2C */ - GPIO147_I2C0_SCL, - GPIO148_I2C0_SDA, - GPIO16_I2C1_SCL, - GPIO17_I2C1_SDA, - GPIO10_I2C2_SDA, - GPIO11_I2C2_SCL, - GPIO229_I2C3_SDA, - GPIO230_I2C3_SCL, - - /* SSP0, to AB8500 */ - GPIO143_SSP0_CLK, - GPIO144_SSP0_FRM, - GPIO145_SSP0_RXD | PIN_PULL_DOWN, - GPIO146_SSP0_TXD, - - /* MMC0 (MicroSD card) */ - GPIO18_MC0_CMDDIR | PIN_OUTPUT_HIGH, - GPIO19_MC0_DAT0DIR | PIN_OUTPUT_HIGH, - GPIO20_MC0_DAT2DIR | PIN_OUTPUT_HIGH, - GPIO21_MC0_DAT31DIR | PIN_OUTPUT_HIGH, - GPIO22_MC0_FBCLK | PIN_INPUT_NOPULL, - GPIO23_MC0_CLK | PIN_OUTPUT_LOW, - GPIO24_MC0_CMD | PIN_INPUT_PULLUP, - GPIO25_MC0_DAT0 | PIN_INPUT_PULLUP, - GPIO26_MC0_DAT1 | PIN_INPUT_PULLUP, - GPIO27_MC0_DAT2 | PIN_INPUT_PULLUP, - GPIO28_MC0_DAT3 | PIN_INPUT_PULLUP, - - /* MMC4 (On-board eMMC) */ - GPIO197_MC4_DAT3 | PIN_INPUT_PULLUP, - GPIO198_MC4_DAT2 | PIN_INPUT_PULLUP, - GPIO199_MC4_DAT1 | PIN_INPUT_PULLUP, - GPIO200_MC4_DAT0 | PIN_INPUT_PULLUP, - GPIO201_MC4_CMD | PIN_INPUT_PULLUP, - GPIO202_MC4_FBCLK | PIN_INPUT_NOPULL, - GPIO203_MC4_CLK | PIN_OUTPUT_LOW, - GPIO204_MC4_DAT7 | PIN_INPUT_PULLUP, - GPIO205_MC4_DAT6 | PIN_INPUT_PULLUP, - GPIO206_MC4_DAT5 | PIN_INPUT_PULLUP, - GPIO207_MC4_DAT4 | PIN_INPUT_PULLUP, - - /* UART2, console */ - GPIO29_U2_RXD | PIN_INPUT_PULLUP, - GPIO30_U2_TXD | PIN_OUTPUT_HIGH, - GPIO31_U2_CTSn | PIN_INPUT_PULLUP, - GPIO32_U2_RTSn | PIN_OUTPUT_HIGH, - - /* - * USB, pin 256-267 USB, Is probably already setup correctly from - * BootROM/boot stages, but we don't trust that and set it up anyway - */ - GPIO256_USB_NXT, - GPIO257_USB_STP, - GPIO258_USB_XCLK, - GPIO259_USB_DIR, - GPIO260_USB_DAT7, - GPIO261_USB_DAT6, - GPIO262_USB_DAT5, - GPIO263_USB_DAT4, - GPIO264_USB_DAT3, - GPIO265_USB_DAT2, - GPIO266_USB_DAT1, - GPIO267_USB_DAT0, -}; - -unsigned long gpio_cfg_snowball[] = { - /* MMC0 (MicroSD card) */ - GPIO217_GPIO | PIN_OUTPUT_HIGH, /* MMC_EN */ - GPIO218_GPIO | PIN_INPUT_NOPULL, /* MMC_CD */ - GPIO228_GPIO | PIN_OUTPUT_HIGH, /* SD_SEL */ - - /* eMMC */ - GPIO167_GPIO | PIN_OUTPUT_HIGH, /* RSTn_MLC */ - - /* LAN */ - GPIO131_SM_ADQ8, - GPIO132_SM_ADQ9, - GPIO133_SM_ADQ10, - GPIO134_SM_ADQ11, - GPIO135_SM_ADQ12, - GPIO136_SM_ADQ13, - GPIO137_SM_ADQ14, - GPIO138_SM_ADQ15, - - /* RSTn_LAN */ - GPIO141_GPIO | PIN_OUTPUT_HIGH, -}; - -/* - * Miscellaneous platform dependent initialisations - */ - -int board_init(void) -{ - /* - * Setup board (bd) and board-info (bi). - * bi_arch_number: Unique id for this board. It will passed in r1 to - * Linux startup code and is the machine_id. - * bi_boot_params: Where this board expects params. - */ - gd->bd->bi_arch_number = MACH_TYPE_SNOWBALL; - gd->bd->bi_boot_params = 0x00000100; - - /* Configure GPIO pins needed by U-boot */ - db8500_gpio_config_pins(gpio_cfg_common, ARRAY_SIZE(gpio_cfg_common)); - - db8500_gpio_config_pins(gpio_cfg_snowball, - ARRAY_SIZE(gpio_cfg_snowball)); - - return 0; -} - -int dram_init(void) -{ - gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; - gd->ram_size = gd->bd->bi_dram[0].size = - get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE); - - return 0; -} - -static int raise_ab8500_gpio16(void) -{ - int ret; - - /* selection */ - ret = ab8500_read(AB8500_MISC, AB8500_GPIO_SEL2_REG); - if (ret < 0) - goto out; - - ret |= 0x80; - ret = ab8500_write(AB8500_MISC, AB8500_GPIO_SEL2_REG, ret); - if (ret < 0) - goto out; - - /* direction */ - ret = ab8500_read(AB8500_MISC, AB8500_GPIO_DIR2_REG); - if (ret < 0) - goto out; - - ret |= 0x80; - ret = ab8500_write(AB8500_MISC, AB8500_GPIO_DIR2_REG, ret); - if (ret < 0) - goto out; - - /* out */ - ret = ab8500_read(AB8500_MISC, AB8500_GPIO_OUT2_REG); - if (ret < 0) - goto out; - - ret |= 0x80; - ret = ab8500_write(AB8500_MISC, AB8500_GPIO_OUT2_REG, ret); - -out: - return ret; -} - -static int raise_ab8500_gpio26(void) -{ - int ret; - - /* selection */ - ret = ab8500_read(AB8500_MISC, AB8500_GPIO_DIR4_REG); - if (ret < 0) - goto out; - - ret |= 0x2; - ret = ab8500_write(AB8500_MISC, AB8500_GPIO_DIR4_REG, ret); - if (ret < 0) - goto out; - - /* out */ - ret = ab8500_read(AB8500_MISC, AB8500_GPIO_OUT4_REG); - if (ret < 0) - goto out; - - ret |= 0x2; - ret = ab8500_write(AB8500_MISC, AB8500_GPIO_OUT4_REG, ret); - -out: - return ret; -} - -int board_late_init(void) -{ - /* enable 3V3 for LAN controller */ - if (raise_ab8500_gpio26() >= 0) { - /* Turn on FSMC device */ - writel(0x1, 0x8000f000); - writel(0x1, 0x8000f008); - - /* setup FSMC for LAN controler */ - writel(0x305b, 0x80000000); - - /* run at the highest possible speed */ - writel(0x01010210, 0x80000004); - } else - printf("error: can't raise GPIO26\n"); - - /* enable 3v6 for GBF chip */ - if ((raise_ab8500_gpio16() < 0)) - printf("error: cant' raise GPIO16\n"); - - /* empty UART RX FIFO */ - while (tstc()) - (void) getc(); - - return 0; -} - -#ifdef CONFIG_MMC -/* - * emmc_host_init - initialize the emmc controller. - * Configure GPIO settings, set initial clock and power for emmc slot. - * Initialize mmc struct and register with mmc framework. - */ -static int emmc_host_init(void) -{ - struct pl180_mmc_host *host; - - host = malloc(sizeof(struct pl180_mmc_host)); - if (!host) - return -ENOMEM; - memset(host, 0, sizeof(*host)); - - host->base = (struct sdi_registers *)CFG_EMMC_BASE; - host->pwr_init = SDI_PWR_OPD | SDI_PWR_PWRCTRL_ON; - host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V2 | - SDI_CLKCR_CLKEN | SDI_CLKCR_HWFC_EN; - strcpy(host->name, "EMMC"); - host->caps = MMC_MODE_8BIT | MMC_MODE_HS | MMC_MODE_HS_52MHz; - host->voltages = VOLTAGE_WINDOW_MMC; - host->clock_min = ARM_MCLK / (2 + SDI_CLKCR_CLKDIV_INIT_V2); - host->clock_max = ARM_MCLK / 2; - host->clock_in = ARM_MCLK; - host->version2 = 1; - - return arm_pl180_mmci_init(host); -} - -/* - * mmc_host_init - initialize the external mmc controller. - * Configure GPIO settings, set initial clock and power for mmc slot. - * Initialize mmc struct and register with mmc framework. - */ -static int mmc_host_init(void) -{ - struct pl180_mmc_host *host; - u32 sdi_u32; - - host = malloc(sizeof(struct pl180_mmc_host)); - if (!host) - return -ENOMEM; - memset(host, 0, sizeof(*host)); - - host->base = (struct sdi_registers *)CFG_MMC_BASE; - sdi_u32 = 0xBF; - writel(sdi_u32, &host->base->power); - host->pwr_init = 0xBF; - host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V2 | - SDI_CLKCR_CLKEN | SDI_CLKCR_HWFC_EN; - strcpy(host->name, "MMC"); - host->caps = MMC_MODE_8BIT; - host->b_max = 0; - host->voltages = VOLTAGE_WINDOW_SD; - host->clock_min = ARM_MCLK / (2 + SDI_CLKCR_CLKDIV_INIT_V2); - host->clock_max = ARM_MCLK / 2; - host->clock_in = ARM_MCLK; - host->version2 = 1; - - return arm_pl180_mmci_init(host); -} - -/* - * board_mmc_init - initialize all the mmc/sd host controllers. - * Called by generic mmc framework. - */ -int board_mmc_init(bd_t *bis) -{ - int error; - - (void) bis; - - error = emmc_host_init(); - if (error) { - printf("emmc_host_init() %d\n", error); - return -1; - } - - u8500_mmc_power_init(); - - error = mmc_host_init(); - if (error) { - printf("mmc_host_init() %d\n", error); - return -1; - } - - return 0; -} -#endif /* CONFIG_MMC */ diff --git a/board/st-ericsson/u8500/Kconfig b/board/st-ericsson/u8500/Kconfig deleted file mode 100644 index 909f30db4b..0000000000 --- a/board/st-ericsson/u8500/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_U8500_HREF - -config SYS_BOARD - default "u8500" - -config SYS_VENDOR - default "st-ericsson" - -config SYS_SOC - default "u8500" - -config SYS_CONFIG_NAME - default "u8500_href" - -endif diff --git a/board/st-ericsson/u8500/MAINTAINERS b/board/st-ericsson/u8500/MAINTAINERS deleted file mode 100644 index e2581eb2e4..0000000000 --- a/board/st-ericsson/u8500/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -U8500 BOARD -#M: - -S: Maintained -F: board/st-ericsson/u8500/ -F: include/configs/u8500_href.h -F: configs/u8500_href_defconfig diff --git a/board/st-ericsson/u8500/Makefile b/board/st-ericsson/u8500/Makefile deleted file mode 100644 index d6c4280475..0000000000 --- a/board/st-ericsson/u8500/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Copyright (C) ST-Ericsson SA 2009 -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ccflags-y += -D__RELEASE -D__STN_8500 - -obj-y := u8500_href.o gpio.o diff --git a/board/st-ericsson/u8500/gpio.c b/board/st-ericsson/u8500/gpio.c deleted file mode 100644 index 2ddc7af48b..0000000000 --- a/board/st-ericsson/u8500/gpio.c +++ /dev/null @@ -1,331 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2009 - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -static struct gpio_register *addr_gpio_register[] = { - (void *)U8500_GPIO_0_BASE, - (void *)U8500_GPIO_1_BASE, - (void *)U8500_GPIO_2_BASE, - (void *)U8500_GPIO_3_BASE, - (void *)U8500_GPIO_4_BASE, - (void *)U8500_GPIO_5_BASE, - (void *)U8500_GPIO_6_BASE, - (void *)U8500_GPIO_7_BASE, - (void *)U8500_GPIO_8_BASE, -}; - -struct gpio_altfun_data altfun_table[] = { - { - .altfun = GPIO_ALT_I2C_0, - .start = 147, - .end = 148, - .cont = 0, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_I2C_1, - .start = 16, - .end = 17, - .cont = 0, - .type = GPIO_ALTF_B, - }, - { - .altfun = GPIO_ALT_I2C_2, - .start = 10, - .end = 11, - .cont = 0, - .type = GPIO_ALTF_B, - }, - { - .altfun = GPIO_ALT_I2C_3, - .start = 229, - .end = 230, - .cont = 0, - .type = GPIO_ALTF_C, - }, - { - .altfun = GPIO_ALT_UART_0_MODEM, - .start = 0, - .end = 3, - .cont = 1, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_UART_0_MODEM, - .start = 33, - .end = 36, - .cont = 0, - .type = GPIO_ALTF_C, - }, - { - .altfun = GPIO_ALT_UART_1, - .start = 4, - .end = 7, - .cont = 0, - .type = - GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_UART_2, - .start = 18, - .end = 19, - .cont = 1, - .type = GPIO_ALTF_B, - }, - { - .altfun = GPIO_ALT_UART_2, - .start = 29, - .end = 32, - .cont = 0, - .type = GPIO_ALTF_C, - }, - { - .altfun = GPIO_ALT_MSP_0, - .start = 12, - .end = 17, - .cont = 1, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_MSP_0, - .start = 21, - .end = 21, - .cont = 0, - .type = GPIO_ALTF_B, - }, - { - .altfun = GPIO_ALT_MSP_1, - .start = 33, - .end = 36, - .cont = 0, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_MSP_2, - .start = 192, - .end = 196, - .cont = 0, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_LCD_PANEL, - .start = 64, - .end = 93, - .cont = 1, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_LCD_PANEL, - .start = 150, - .end = 171, - .cont = 0, - .type = GPIO_ALTF_B, - }, - { - .altfun = GPIO_ALT_SD_CARD0, - .start = 18, - .end = 28, - .cont = 0, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_MM_CARD0, - .start = 18, - .end = 32, - .cont = 0, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_USB_OTG, - .start = 256, - .end = 267, - .cont = 0, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_EMMC, - .start = 197, - .end = 207, - .cont = 0, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_POP_EMMC, - .start = 128, - .end = 138, - .cont = 0, - .type = GPIO_ALTF_A, - }, -}; - -/* - * Static Function declarations - */ -enum gpio_error gpio_setpinconfig(int pin_id, struct gpio_config *config) -{ - struct gpio_register *p_gpio_register = - addr_gpio_register[GPIO_BLOCK(pin_id)]; - u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK); - enum gpio_error error = GPIO_OK; - u32 temp_reg; - - switch (config->mode) { - case GPIO_ALTF_A: - temp_reg = readl(&p_gpio_register->gpio_afsa); - temp_reg |= mask; - writel(temp_reg, &p_gpio_register->gpio_afsa); - temp_reg = readl(&p_gpio_register->gpio_afsb); - temp_reg &= ~mask; - writel(temp_reg, &p_gpio_register->gpio_afsb); - break; - case GPIO_ALTF_B: - temp_reg = readl(&p_gpio_register->gpio_afsa); - temp_reg &= ~mask; - writel(temp_reg, &p_gpio_register->gpio_afsa); - temp_reg = readl(&p_gpio_register->gpio_afsb); - temp_reg |= mask; - writel(temp_reg, &p_gpio_register->gpio_afsb); - break; - case GPIO_ALTF_C: - temp_reg = readl(&p_gpio_register->gpio_afsa); - temp_reg |= mask; - writel(temp_reg, &p_gpio_register->gpio_afsa); - temp_reg = readl(&p_gpio_register->gpio_afsb); - temp_reg |= mask; - writel(temp_reg, &p_gpio_register->gpio_afsb); - break; - case GPIO_MODE_SOFTWARE: - temp_reg = readl(&p_gpio_register->gpio_afsa); - temp_reg &= ~mask; - writel(temp_reg, &p_gpio_register->gpio_afsa); - temp_reg = readl(&p_gpio_register->gpio_afsb); - temp_reg &= ~mask; - writel(temp_reg, &p_gpio_register->gpio_afsb); - - switch (config->direction) { - case GPIO_DIR_INPUT: - writel(mask, &p_gpio_register->gpio_dirc); - break; - case GPIO_DIR_OUTPUT: - writel(mask, &p_gpio_register->gpio_dirs); - break; - case GPIO_DIR_LEAVE_UNCHANGED: - break; - default: - return GPIO_INVALID_PARAMETER; - } - - break; - case GPIO_MODE_LEAVE_UNCHANGED: - break; - default: - return GPIO_INVALID_PARAMETER; - } - return error; -} - -enum gpio_error gpio_resetgpiopin(int pin_id, char *dev_name) -{ - struct gpio_register *p_gpio_register = - addr_gpio_register[GPIO_BLOCK(pin_id)]; - u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK); - enum gpio_error error = GPIO_OK; - u32 temp_reg; - - temp_reg = readl(&p_gpio_register->gpio_afsa); - temp_reg &= ~mask; - writel(temp_reg, &p_gpio_register->gpio_afsa); - temp_reg = readl(&p_gpio_register->gpio_afsb); - temp_reg &= ~mask; - writel(temp_reg, &p_gpio_register->gpio_afsb); - writel(mask, &p_gpio_register->gpio_dirc); - - return error; -} - -struct gpio_config altfun_pinconfig; -enum gpio_error gpio_altfunction(enum gpio_alt_function alt_func, - int which_altfunc, char *dev_name) -{ - int i, j, start, end; - enum gpio_error error = -1; - - for (i = 0; i < ARRAY_SIZE(altfun_table); i++) { - if (altfun_table[i].altfun != alt_func) - continue; - - start = altfun_table[i].start; - end = altfun_table[i].end; - for (j = start; j <= end; j++) { - if (which_altfunc == GPIO_ALTF_FIND) - altfun_pinconfig.mode = altfun_table[i].type; - else - altfun_pinconfig.mode = which_altfunc; - altfun_pinconfig.direction = GPIO_DIR_OUTPUT; - altfun_pinconfig.dev_name = dev_name; - - if (which_altfunc != GPIO_ALTF_DISABLE) - error = gpio_setpinconfig(j, &altfun_pinconfig); - else - error = gpio_resetgpiopin(j, dev_name); - if (!error) - continue; - printf("GPIO %d configuration failure (nmdk_error:%d)", - j, error); - error = GPIO_INVALID_PARAMETER; - return error; - } - - if (!altfun_table[i].cont) - break; - } - return error; -} - -int gpio_writepin(int pin_id, enum gpio_data value, char *dev_name) -{ - struct gpio_register *p_gpio_register = - addr_gpio_register[GPIO_BLOCK(pin_id)]; - u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK); - - switch (value) { - case GPIO_DATA_HIGH: - writel(mask, &p_gpio_register->gpio_dats); - break; - case GPIO_DATA_LOW: - writel(mask, &p_gpio_register->gpio_datc); - break; - default: - printf("Invalid value passed in %s", __FUNCTION__); - return GPIO_INVALID_PARAMETER; - } - return GPIO_OK; -} - -int gpio_readpin(int pin_id, enum gpio_data *rv) -{ - struct gpio_register *p_gpio_register = - addr_gpio_register[GPIO_BLOCK(pin_id)]; - u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK); - - if ((readl(&p_gpio_register->gpio_dat) & mask) != 0) - *rv = GPIO_DATA_HIGH; - else - *rv = GPIO_DATA_LOW; - return GPIO_OK; -} - -int gpio_altfuncenable(enum gpio_alt_function altfunc, char *dev_name) -{ - return (int)gpio_altfunction(altfunc, GPIO_ALTF_FIND, dev_name); -} - -int gpio_altfuncdisable(enum gpio_alt_function altfunc, char *dev_name) -{ - return (int)gpio_altfunction(altfunc, GPIO_ALTF_DISABLE, dev_name); -} diff --git a/board/st-ericsson/u8500/u8500_href.c b/board/st-ericsson/u8500/u8500_href.c deleted file mode 100644 index 9df499b1dc..0000000000 --- a/board/st-ericsson/u8500/u8500_href.c +++ /dev/null @@ -1,477 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2009 - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#ifdef CONFIG_MMC -#include "../../../drivers/mmc/arm_pl180_mmci.h" -#endif - -#define NOMADIK_PER4_BASE (0x80150000) -#define NOMADIK_BACKUPRAM0_BASE (NOMADIK_PER4_BASE + 0x00000) -#define NOMADIK_BACKUPRAM1_BASE (NOMADIK_PER4_BASE + 0x01000) - -/* Power, Reset, Clock Management Unit */ -/* - * SVA: Smart Video Accelerator - * SIA: Smart Imaging Accelerator - * SGA: Smart Graphic accelerator - * B2R2: Graphic blitter - */ -#define PRCM_ARMCLKFIX_MGT_REG (PRCMU_BASE + 0x000) -#define PRCM_ACLK_MGT_REG (PRCMU_BASE + 0x004) -#define PRCM_SVAMMDSPCLK_MGT_REG (PRCMU_BASE + 0x008) -#define PRCM_SIAMMDSPCLK_MGT_REG (PRCMU_BASE + 0x00C) -#define PRCM_SAAMMDSPCLK_MGT_REG (PRCMU_BASE + 0x010) -#define PRCM_SGACLK_MGT_REG (PRCMU_BASE + 0x014) -#define PRCM_UARTCLK_MGT_REG (PRCMU_BASE + 0x018) -#define PRCM_MSPCLK_MGT_REG (PRCMU_BASE + 0x01C) -#define PRCM_I2CCLK_MGT_REG (PRCMU_BASE + 0x020) -#define PRCM_SDMMCCLK_MGT_REG (PRCMU_BASE + 0x024) -#define PRCM_SLIMCLK_MGT_REG (PRCMU_BASE + 0x028) -#define PRCM_PER1CLK_MGT_REG (PRCMU_BASE + 0x02C) -#define PRCM_PER2CLK_MGT_REG (PRCMU_BASE + 0x030) -#define PRCM_PER3CLK_MGT_REG (PRCMU_BASE + 0x034) -#define PRCM_PER5CLK_MGT_REG (PRCMU_BASE + 0x038) -#define PRCM_PER6CLK_MGT_REG (PRCMU_BASE + 0x03C) -#define PRCM_PER7CLK_MGT_REG (PRCMU_BASE + 0x040) -#define PRCM_DMACLK_MGT_REG (PRCMU_BASE + 0x074) -#define PRCM_B2R2CLK_MGT_REG (PRCMU_BASE + 0x078) - -#define PRCM_PLLSOC0_FREQ_REG (PRCMU_BASE + 0x080) -#define PRCM_PLLSOC1_FREQ_REG (PRCMU_BASE + 0x084) -#define PRCM_PLLARM_FREQ_REG (PRCMU_BASE + 0x088) -#define PRCM_PLLDDR_FREQ_REG (PRCMU_BASE + 0x08C) -#define PRCM_ARM_CHGCLKREQ_REG (PRCMU_BASE + 0x114) - -#define PRCM_TCR (PRCMU_BASE + 0x1C8) - -/* - * Memory controller register - */ -#define DMC_BASE_ADDR 0x80156000 -#define DMC_CTL_97 (DMC_BASE_ADDR + 0x184) - -int board_id; /* set in board_late_init() */ - -/* PLLs for clock management registers */ -enum { - GATED = 0, - PLLSOC0, /* pllsw = 001, ffs() = 1 */ - PLLSOC1, /* pllsw = 010, ffs() = 2 */ - PLLDDR, /* pllsw = 100, ffs() = 3 */ - PLLARM, -}; - -static struct pll_freq_regs { - int idx; /* index fror pll_name and pll_khz arrays */ - uint32_t addr; -} pll_freq_regs[] = { - {PLLSOC0, PRCM_PLLSOC0_FREQ_REG}, - {PLLSOC1, PRCM_PLLSOC1_FREQ_REG}, - {PLLDDR, PRCM_PLLDDR_FREQ_REG}, - {PLLARM, PRCM_PLLARM_FREQ_REG}, - {0, 0}, -}; - -static const char *pll_name[5] = {"GATED", "SOC0", "SOC1", "DDR", "ARM"}; -static uint32_t pll_khz[5]; /* use ffs(pllsw(reg)) as index for 0..3 */ - -static struct clk_mgt_regs { - uint32_t addr; - uint32_t val; - const char *descr; -} clk_mgt_regs[] = { - /* register content taken from bootrom settings */ - {PRCM_ARMCLKFIX_MGT_REG, 0x0120, "ARMCLKFIX"}, /* ena, SOC0/0, ??? */ - {PRCM_ACLK_MGT_REG, 0x0125, "ACLK"}, /* ena, SOC0/5, 160 MHz */ - {PRCM_SVAMMDSPCLK_MGT_REG, 0x1122, "SVA"}, /* ena, SOC0/2, 400 MHz */ - {PRCM_SIAMMDSPCLK_MGT_REG, 0x0022, "SIA"}, /* dis, SOC0/2, 400 MHz */ - {PRCM_SAAMMDSPCLK_MGT_REG, 0x0822, "SAA"}, /* dis, SOC0/4, 200 MHz */ - {PRCM_SGACLK_MGT_REG, 0x0024, "SGA"}, /* dis, SOC0/4, 200 MHz */ - {PRCM_UARTCLK_MGT_REG, 0x0300, "UART"}, /* ena, GATED, CLK38 */ - {PRCM_MSPCLK_MGT_REG, 0x0200, "MSP"}, /* dis, GATED, CLK38 */ - {PRCM_I2CCLK_MGT_REG, 0x0130, "I2C"}, /* ena, SOC0/16, 50 MHz */ - {PRCM_SDMMCCLK_MGT_REG, 0x0130, "SDMMC"}, /* ena, SOC0/16, 50 MHz */ - {PRCM_PER1CLK_MGT_REG, 0x126, "PER1"}, /* ena, SOC0/6, 133 MHz */ - {PRCM_PER2CLK_MGT_REG, 0x126, "PER2"}, /* ena, SOC0/6, 133 MHz */ - {PRCM_PER3CLK_MGT_REG, 0x126, "PER3"}, /* ena, SOC0/6, 133 MHz */ - {PRCM_PER5CLK_MGT_REG, 0x126, "PER5"}, /* ena, SOC0/6, 133 MHz */ - {PRCM_PER6CLK_MGT_REG, 0x126, "PER6"}, /* ena, SOC0/6, 133 MHz */ - {PRCM_PER7CLK_MGT_REG, 0x128, "PER7"}, /* ena, SOC0/8, 100 MHz */ - {PRCM_DMACLK_MGT_REG, 0x125, "DMA"}, /* ena, SOC0/5, 160 MHz */ - {PRCM_B2R2CLK_MGT_REG, 0x025, "B2R2"}, /* dis, SOC0/5, 160 MHz */ - {0, 0, NULL}, -}; - -static void init_regs(void); - -DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_SHOW_BOOT_PROGRESS) -void show_boot_progress(int progress) -{ - printf("Boot reached stage %d\n", progress); -} -#endif - -/* - * Miscellaneous platform dependent initialisations - */ - -int board_early_init_f(void) -{ - init_regs(); - return 0; -} - -int board_init(void) -{ - uint32_t unused_cols_rows; - unsigned int nrows; - unsigned int ncols; - - gd->bd->bi_arch_number = 0x1A4; - gd->bd->bi_boot_params = 0x00000100; - gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; - - /* - * Assumption: 2 CS active, both CS have same layout. - * 15 rows max, 11 cols max (controller spec). - * memory chip has 8 banks, I/O width 32 bit. - * The correct way would be to read MR#8: I/O width and density, - * but this requires locking against the PRCMU firmware. - * Simplified approach: - * Read number of unused rows and columns from mem controller. - * size = nCS x 2^(rows+cols) x nbanks x buswidth_bytes - */ - unused_cols_rows = readl(DMC_CTL_97); - nrows = 15 - (unused_cols_rows & 0x07); - ncols = 11 - ((unused_cols_rows & 0x0700) >> 8); - gd->bd->bi_dram[0].size = 2 * (1 << (nrows + ncols)) * 8 * 4; - - icache_enable(); - - return 0; -} - -int dram_init(void) -{ - gd->ram_size = PHYS_SDRAM_SIZE_1; - - return 0; -} - -unsigned int addr_vall_arr[] = { - 0x8011F000, 0x0000FFFF, /* Clocks for HSI TODO: Enable reqd only */ - 0x8011F008, 0x00001CFF, /* Clocks for HSI TODO: Enable reqd only */ - 0x8000F000, 0x00007FFF, /* Clocks for I2C TODO: Enable reqd only */ - 0x8000F008, 0x00007FFF, /* Clocks for I2C TODO: Enable reqd only */ - 0x80157020, 0x00000150, /* I2C 48MHz clock */ - 0x8012F000, 0x00007FFF, /* Clocks for SD TODO: Enable reqd only */ - 0x8012F008, 0x00007FFF, /* Clocks for SD TODO: Enable reqd only */ - 0xA03DF000, 0x0000000D, /* Clock for MTU Timers */ - 0x8011E00C, 0x00000000, /* GPIO ALT FUNC for EMMC */ - 0x8011E004, 0x0000FFE0, /* GPIO ALT FUNC for EMMC */ - 0x8011E020, 0x0000FFE0, /* GPIO ALT FUNC for EMMC */ - 0x8011E024, 0x00000000, /* GPIO ALT FUNC for EMMC */ - 0x8012E000, 0x20000000, /* GPIO ALT FUNC for UART */ - 0x8012E00C, 0x00000000, /* GPIO ALT FUNC for SD */ - 0x8012E004, 0x0FFC0000, /* GPIO ALT FUNC for SD */ - 0x8012E020, 0x60000000, /* GPIO ALT FUNC for SD */ - 0x8012E024, 0x60000000, /* GPIO ALT FUNC for SD */ - 0x801571E4, 0x0000000C, /* PRCMU settings for B2R2, - PRCM_APE_RESETN_SET_REG */ - 0x80157024, 0x00000130, /* PRCMU settings for EMMC/SD */ - 0xA03FF000, 0x00000003, /* USB */ - 0xA03FF008, 0x00000001, /* USB */ - 0xA03FE00C, 0x00000000, /* USB */ - 0xA03FE020, 0x00000FFF, /* USB */ - 0xA03FE024, 0x00000000 /* USB */ -}; - -#ifdef CONFIG_BOARD_LATE_INIT -/* - * called after all initialisation were done, but before the generic - * mmc_initialize(). - */ -int board_late_init(void) -{ - uchar byte; - - /* - * Determine and set board_id environment variable - * 0: mop500, 1: href500 - * Above boards have different GPIO expander chips which we can - * distinguish by the chip id. - * - * The board_id environment variable is needed for the Linux bootargs. - */ - (void) i2c_set_bus_num(0); - (void) i2c_read(CONFIG_SYS_I2C_GPIOE_ADDR, 0x80, 1, &byte, 1); - if (byte == 0x01) { - board_id = 0; - setenv("board_id", "0"); - } else { - board_id = 1; - setenv("board_id", "1"); - } -#ifdef CONFIG_MMC - u8500_mmc_power_init(); - - /* - * config extended GPIO pins for level shifter and - * SDMMC_ENABLE - */ - if (board_id == 0) { - /* MOP500 */ - byte = 0x0c; - (void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0x89, 1, &byte, 1); - (void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0x83, 1, &byte, 1); - } else { - /* HREF */ - /* set the direction of GPIO KPY9 and KPY10 */ - byte = 0x06; - (void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0xC8, 1, &byte, 1); - /* must be a multibyte access */ - (void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0xC4, 1, - (uchar []) {0x06, 0x06}, 2); - } -#endif /* CONFIG_MMC */ - /* - * Create a memargs variable which points uses either the memargs256 or - * memargs512 environment variable, depending on the memory size. - * memargs is used to build the bootargs, memargs256 and memargs512 are - * stored in the environment. - */ - if (gd->bd->bi_dram[0].size == 0x10000000) { - setenv("memargs", "setenv bootargs ${bootargs} ${memargs256}"); - setenv("mem", "256M"); - } else { - setenv("memargs", "setenv bootargs ${bootargs} ${memargs512}"); - setenv("mem", "512M"); - } - - return 0; -} -#endif /* CONFIG_BOARD_LATE_INIT */ - -static void early_gpio_setup(struct gpio_register *gpio_reg, u32 bits) -{ - writel(readl(&gpio_reg->gpio_dats) | bits, &gpio_reg->gpio_dats); - writel(readl(&gpio_reg->gpio_pdis) & ~bits, &gpio_reg->gpio_pdis); -} - -static void init_regs(void) -{ - /* FIXME Remove magic register array settings for ED also */ - struct prcmu *prcmu = (struct prcmu *) U8500_PRCMU_BASE; - - /* Enable timers */ - writel(1 << 17, &prcmu->tcr); - - u8500_prcmu_enable(&prcmu->per1clk_mgt); - u8500_prcmu_enable(&prcmu->per2clk_mgt); - u8500_prcmu_enable(&prcmu->per3clk_mgt); - u8500_prcmu_enable(&prcmu->per5clk_mgt); - u8500_prcmu_enable(&prcmu->per6clk_mgt); - u8500_prcmu_enable(&prcmu->per7clk_mgt); - - u8500_prcmu_enable(&prcmu->uartclk_mgt); - u8500_prcmu_enable(&prcmu->i2cclk_mgt); - - u8500_prcmu_enable(&prcmu->sdmmcclk_mgt); - - u8500_clock_enable(1, 9, -1); /* GPIO0 */ - - u8500_clock_enable(2, 11, -1); /* GPIO1 */ - - u8500_clock_enable(3, 8, -1); /* GPIO2 */ - u8500_clock_enable(5, 1, -1); /* GPIO3 */ - - u8500_clock_enable(3, 6, 6); /* UART2 */ - - gpio_altfuncenable(GPIO_ALT_I2C_0, "I2C0"); - u8500_clock_enable(3, 3, 3); /* I2C0 */ - - early_gpio_setup((struct gpio_register *)U8500_GPIO_0_BASE, 0x60000000); - gpio_altfuncenable(GPIO_ALT_UART_2, "UART2"); - - early_gpio_setup((struct gpio_register *)U8500_GPIO_6_BASE, 0x0000ffe0); - gpio_altfuncenable(GPIO_ALT_EMMC, "EMMC"); - - early_gpio_setup((struct gpio_register *)U8500_GPIO_0_BASE, 0x0000ffe0); - gpio_altfuncenable(GPIO_ALT_SD_CARD0, "SDCARD"); - - u8500_clock_enable(1, 5, 5); /* SDI0 */ - u8500_clock_enable(2, 4, 2); /* SDI4 */ - - u8500_clock_enable(6, 7, -1); /* MTU0 */ - u8500_clock_enable(3, 4, 4); /* SDI2 */ - - early_gpio_setup((struct gpio_register *)U8500_GPIO_4_BASE, 0x000007ff); - gpio_altfuncenable(GPIO_ALT_POP_EMMC, "EMMC"); - - /* - * Enabling clocks for all devices which are AMBA devices in the - * kernel. Otherwise they will not get probe()'d because the - * peripheral ID register will not be powered. - */ - - /* XXX: some of these differ between ED/V1 */ - - u8500_clock_enable(1, 1, 1); /* UART1 */ - u8500_clock_enable(1, 0, 0); /* UART0 */ - - u8500_clock_enable(3, 2, 2); /* SSP1 */ - u8500_clock_enable(3, 1, 1); /* SSP0 */ - - u8500_clock_enable(2, 8, -1); /* SPI0 */ - u8500_clock_enable(2, 5, 3); /* MSP2 */ -} - -#ifdef CONFIG_MMC -static int u8500_mmci_board_init(void) -{ - enum gpio_error error; - struct gpio_register *gpio_base_address; - - gpio_base_address = (void *)(U8500_GPIO_0_BASE); - gpio_base_address->gpio_dats |= 0xFFC0000; - gpio_base_address->gpio_pdis &= ~0xFFC0000; - - /* save the GPIO0 AFSELA register */ - error = gpio_altfuncenable(GPIO_ALT_SD_CARD0, "MMC"); - if (error != GPIO_OK) { - printf("u8500_mmci_board_init() gpio_altfuncenable failed\n"); - return -ENODEV; - } - return 0; -} - -int board_mmc_init(bd_t *bd) -{ - struct pl180_mmc_host *host; - - if (u8500_mmci_board_init()) - return -ENODEV; - - host = malloc(sizeof(struct pl180_mmc_host)); - if (!host) - return -ENOMEM; - memset(host, 0, sizeof(*host)); - - strcpy(host->name, "MMC"); - host->base = (struct sdi_registers *)CONFIG_ARM_PL180_MMCI_BASE; - host->pwr_init = INIT_PWR; - host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V1 | SDI_CLKCR_CLKEN; - host->voltages = VOLTAGE_WINDOW_MMC; - host->caps = 0; - host->clock_in = ARM_MCLK; - host->clock_min = ARM_MCLK / (2 * (SDI_CLKCR_CLKDIV_INIT_V1 + 1)); - host->clock_max = CONFIG_ARM_PL180_MMCI_CLOCK_FREQ; - - return arm_pl180_mmci_init(host); -} -#endif - - -/* - * get_pll_freq_khz - return PLL frequency in kHz - */ -static uint32_t get_pll_freq_khz(uint32_t inclk_khz, uint32_t freq_reg) -{ - uint32_t idf, ldf, odf, seldiv, phi; - - /* - * PLLOUTCLK = PHI = (INCLK*LDF)/(2*ODF*IDF) if SELDIV2=0 - * PLLOUTCLK = PHI = (INCLK*LDF)/(4*ODF*IDF) if SELDIV2=1 - * where: - * IDF=R(2:0) (when R=000, IDF=1d) - * LDF = 2*D(7:0) (D must be greater than or equal to 6) - * ODF = N(5:0) (when N=000000, 0DF=1d) - */ - - idf = (freq_reg & 0x70000) >> 16; - ldf = (freq_reg & 0xff) * 2; - odf = (freq_reg & 0x3f00) >> 8; - seldiv = (freq_reg & 0x01000000) >> 24; - phi = (inclk_khz * ldf) / (2 * odf * idf); - if (seldiv) - phi = phi/2; - - return phi; -} - -int do_clkinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - uint32_t inclk_khz; - uint32_t reg, phi; - uint32_t clk_khz; - unsigned int clk_sel; - struct clk_mgt_regs *clks = clk_mgt_regs; - struct pll_freq_regs *plls = pll_freq_regs; - - /* - * Go through list of PLLs. - * Initialise pll out frequency array (pll_khz) and print frequency. - */ - inclk_khz = 38400; /* 38.4 MHz */ - while (plls->addr) { - reg = readl(plls->addr); - phi = get_pll_freq_khz(inclk_khz, reg); - pll_khz[plls->idx] = phi; - printf("%s PLL out frequency: %d.%d Mhz\n", - pll_name[plls->idx], phi/1000, phi % 1000); - plls++; - } - - /* check ARM clock source */ - reg = readl(PRCM_ARM_CHGCLKREQ_REG); - printf("A9 running on %s\n", - (reg & 1) ? "external clock" : "ARM PLL"); - - /* go through list of clk_mgt_reg */ - printf("\n%19s %9s %7s %9s enabled\n", - "name(addr)", "value", "PLL", "CLK[MHz]"); - while (clks->addr) { - reg = readl(clks->addr); - - /* convert bit position into array index */ - clk_sel = ffs((reg >> 5) & 0x7); /* PLLSW[2:0] */ - - if (reg & 0x200) - clk_khz = 38400; /* CLK38 is set */ - else if ((reg & 0x1f) == 0) - /* ARMCLKFIX_MGT is 0x120, e.g. div = 0 ! */ - clk_khz = 0; - else - clk_khz = pll_khz[clk_sel] / (reg & 0x1f); - - printf("%9s(%08x): %08x, %6s, %4d.%03d, %s\n", - clks->descr, clks->addr, reg, pll_name[clk_sel], - clk_khz / 1000, clk_khz % 1000, - (reg & 0x100) ? "ena" : "dis"); - clks++; - } - - return 0; -} - -U_BOOT_CMD( - clkinfo, 1, 1, do_clkinfo, - "print clock info", - "" -); diff --git a/configs/snowball_defconfig b/configs/snowball_defconfig deleted file mode 100644 index e73bc48af1..0000000000 --- a/configs/snowball_defconfig +++ /dev/null @@ -1,13 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_SNOWBALL=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_XIMG is not set -# CONFIG_CMD_EDITENV is not set -# CONFIG_CMD_ENV_EXISTS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_ITEST is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="U8500 $ " diff --git a/configs/u8500_href_defconfig b/configs/u8500_href_defconfig deleted file mode 100644 index 0aebc7846d..0000000000 --- a/configs/u8500_href_defconfig +++ /dev/null @@ -1,13 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_U8500_HREF=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_XIMG is not set -# CONFIG_CMD_EDITENV is not set -# CONFIG_CMD_ENV_EXISTS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_ITEST is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="U8500 $ " diff --git a/include/configs/snowball.h b/include/configs/snowball.h deleted file mode 100644 index de03e76ba1..0000000000 --- a/include/configs/snowball.h +++ /dev/null @@ -1,232 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2009 - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * #define DEBUG 1 - */ - -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SNOWBALL -#define CONFIG_SYS_ICACHE_OFF -#define CONFIG_SYS_DCACHE_OFF -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_BOARD_LATE_INIT - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_U8500 - -#define CONFIG_SYS_MEMTEST_START 0x00000000 -#define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF - -/*----------------------------------------------------------------------- - * Size of environment and malloc() pool - */ -/* - * If you use U-Boot as crash kernel, make sure that it does not overwrite - * information saved by kexec during panic. Kexec expects the start - * address of the executable 32K above "crashkernel" address. - */ -/* - * Size of malloc() pool - */ -#define CONFIG_ENV_SIZE (8*1024) -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) - -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_CMD_ENV -#define CONFIG_ENV_OFFSET 0x0118000 -#define CONFIG_SYS_MMC_ENV_DEV 0 /* SLOT2: eMMC */ - -/* - * PL011 Configuration - */ -#define CONFIG_PL011_SERIAL -#define CONFIG_PL011_SERIAL_RLCR -#define CONFIG_PL011_SERIAL_FLUSH_ON_INIT - -/* - * U8500 UART registers base for 3 serial devices - */ -#define CFG_UART0_BASE 0x80120000 -#define CFG_UART1_BASE 0x80121000 -#define CFG_UART2_BASE 0x80007000 -#define CFG_SERIAL0 CFG_UART0_BASE -#define CFG_SERIAL1 CFG_UART1_BASE -#define CFG_SERIAL2 CFG_UART2_BASE -#define CONFIG_PL011_CLOCK 38400000 -#define CONFIG_PL01x_PORTS { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1, \ - (void *)CFG_SERIAL2 } -#define CONFIG_CONS_INDEX 2 -#define CONFIG_BAUDRATE 115200 - -/* - * Devices and file systems - */ -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_DOS_PARTITION - -/* - * Commands - */ -#define CONFIG_CMD_MMC -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 - -#ifndef CONFIG_BOOTDELAY -#define CONFIG_BOOTDELAY 1 -#endif -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ -"mmc dev 1; " \ - "if run loadbootscript; " \ - "then run bootscript; " \ - "else " \ - "if run mmcload; " \ - "then run mmcboot; " \ - "else " \ - "mmc dev 0; " \ - "if run emmcloadbootscript; " \ - "then run bootscript; " \ - "else " \ - "if run emmcload; " \ - "then run emmcboot; " \ - "else " \ - "echo No media to boot from; " \ - "fi; " \ - "fi; " \ - "fi; " \ - "fi; " - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "verify=n\0" \ - "loadaddr=0x00100000\0" \ - "console=ttyAMA2,115200n8\0" \ - "loadbootscript=fatload mmc 1:1 ${loadaddr} boot.scr\0" \ - "emmcloadbootscript=fatload mmc 0:2 ${loadaddr} boot.scr\0" \ - "bootscript=echo Running bootscript " \ - "from mmc ...; source ${loadaddr}\0" \ - "memargs256=mem=96M@0 mem_modem=32M@96M mem=32M@128M " \ - "hwmem=22M@160M pmem_hwb=42M@182M mem_mali=32@224M\0" \ - "memargs512=mem=96M@0 mem_modem=32M@96M hwmem=32M@128M " \ - "mem=64M@160M mem_mali=32M@224M " \ - "pmem_hwb=128M@256M mem=128M@384M\0" \ - "memargs1024=mem=128M@0 mali.mali_mem=32M@128M " \ - "hwmem=168M@M160M mem=48M@328M " \ - "mem_issw=1M@383M mem=640M@384M\0" \ - "memargs=setenv bootargs ${bootargs} ${memargs1024}\0" \ - "emmcload=fatload mmc 0:2 ${loadaddr} uImage\0" \ - "mmcload=fatload mmc 1:1 ${loadaddr} uImage\0" \ - "commonargs=setenv bootargs console=${console} " \ - "vmalloc=300M\0" \ - "emmcargs=setenv bootargs ${bootargs} " \ - "root=/dev/mmcblk0p3 " \ - "rootwait\0" \ - "addcons=setenv bootargs ${bootargs} " \ - "console=${console}\0" \ - "emmcboot=echo Booting from eMMC ...; " \ - "run commonargs emmcargs memargs; " \ - "bootm ${loadaddr}\0" \ - "mmcargs=setenv bootargs ${bootargs} " \ - "root=/dev/mmcblk1p2 " \ - "rootwait earlyprintk\0" \ - "mmcboot=echo Booting from external MMC ...; " \ - "run commonargs mmcargs memargs; " \ - "bootm ${loadaddr}\0" \ - "fdt_high=0x2BC00000\0" \ - "stdout=serial,usbtty\0" \ - "stdin=serial,usbtty\0" \ - "stderr=serial,usbtty\0" - -/*----------------------------------------------------------------------- - * Miscellaneous configurable options - */ - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */ - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 - -#define CONFIG_SYS_HUSH_PARSER 1 -#define CONFIG_CMDLINE_EDITING - -#define CONFIG_SETUP_MEMORY_TAGS 2 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x00000000 /* DDR-SDRAM Bank #1 */ - -/* - * additions for new relocation code - */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_MAX_RAM_SIZE 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x100000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET - -/* landing address before relocation */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0x0 -#endif - -/* - * MMC related configs - */ -#define CONFIG_ARM_PL180_MMCI -#define MMC_BLOCK_SIZE 512 -#define CFG_EMMC_BASE 0x80114000 -#define CFG_MMC_BASE 0x80126000 - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_NO_FLASH - -/* - * base register values for U8500 - */ -#define CFG_PRCMU_BASE 0x80157000 /* Power, reset and clock */ - - -/* - * U8500 GPIO register base for 9 banks - */ -#define CONFIG_DB8500_GPIO -#define CFG_GPIO_0_BASE 0x8012E000 -#define CFG_GPIO_1_BASE 0x8012E080 -#define CFG_GPIO_2_BASE 0x8000E000 -#define CFG_GPIO_3_BASE 0x8000E080 -#define CFG_GPIO_4_BASE 0x8000E100 -#define CFG_GPIO_5_BASE 0x8000E180 -#define CFG_GPIO_6_BASE 0x8011E000 -#define CFG_GPIO_7_BASE 0x8011E080 -#define CFG_GPIO_8_BASE 0xA03FE000 - -#define CFG_FSMC_BASE 0x80000000 /* FSMC Controller */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/u8500_href.h b/include/configs/u8500_href.h deleted file mode 100644 index a8cc0306cb..0000000000 --- a/include/configs/u8500_href.h +++ /dev/null @@ -1,198 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2009 - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_U8500 - -#define CONFIG_SYS_MEMTEST_START 0x00000000 -#define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF - -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_BOARD_LATE_INIT - -/* - * Size of malloc() pool - */ -#ifdef CONFIG_BOOT_SRAM -#define CONFIG_ENV_SIZE (32*1024) -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 64*1024) -#else -#define CONFIG_ENV_SIZE (128*1024) -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) -#endif - -/* - * PL011 Configuration - */ -#define CONFIG_PL011_SERIAL -#define CONFIG_PL011_SERIAL_RLCR -#define CONFIG_PL011_SERIAL_FLUSH_ON_INIT - -/* - * U8500 UART registers base for 3 serial devices - */ -#define CFG_UART0_BASE 0x80120000 -#define CFG_UART1_BASE 0x80121000 -#define CFG_UART2_BASE 0x80007000 -#define CFG_SERIAL0 CFG_UART0_BASE -#define CFG_SERIAL1 CFG_UART1_BASE -#define CFG_SERIAL2 CFG_UART2_BASE -#define CONFIG_PL011_CLOCK 38400000 -#define CONFIG_PL01x_PORTS { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1, \ - (void *)CFG_SERIAL2 } -#define CONFIG_CONS_INDEX 2 -#define CONFIG_BAUDRATE 115200 - -/* - * Devices and file systems - */ -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_DOS_PARTITION - -/* - * Commands - */ -#define CONFIG_CMD_MMC -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_I2C - -#ifndef CONFIG_BOOTDELAY -#define CONFIG_BOOTDELAY 1 -#endif -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND "run emmcboot" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "verify=n\0" \ - "loadaddr=0x00100000\0" \ - "console=ttyAMA2,115200n8\0" \ - "memargs256=mem=96M@0 mem_modem=32M@96M mem=30M@128M " \ - "pmem=22M@158M pmem_hwb=44M@180M mem_mali=32@224M\0" \ - "memargs512=mem=96M@0 mem_modem=32M@96M mem=44M@128M " \ - "pmem=22M@172M mem=30M@194M mem_mali=32M@224M " \ - "pmem_hwb=54M@256M mem=202M@310M\0" \ - "commonargs=setenv bootargs cachepolicy=writealloc noinitrd " \ - "init=init " \ - "board_id=${board_id} " \ - "logo.${logo} " \ - "startup_graphics=${startup_graphics}\0" \ - "emmcargs=setenv bootargs ${bootargs} " \ - "root=/dev/mmcblk0p2 " \ - "rootdelay=1\0" \ - "addcons=setenv bootargs ${bootargs} " \ - "console=${console}\0" \ - "emmcboot=echo Booting from eMMC ...; " \ - "run commonargs emmcargs addcons memargs;" \ - "mmc read 0 ${loadaddr} 0xA0000 0x4000;" \ - "bootm ${loadaddr}\0" \ - "flash=mmc init 1;fatload mmc 1 ${loadaddr} flash.scr;" \ - "source ${loadaddr}\0" \ - "loaduimage=mmc init 1;fatload mmc 1 ${loadaddr} uImage\0" \ - "usbtty=cdc_acm\0" \ - "stdout=serial,usbtty\0" \ - "stdin=serial,usbtty\0" \ - "stderr=serial,usbtty\0" - -/* - * Miscellaneous configurable options - */ - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */ - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE - -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING - -#define CONFIG_SETUP_MEMORY_TAGS 2 -#define CONFIG_INITRD_TAG -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ - -/* - * I2C - */ -#define CONFIG_U8500_I2C -#undef CONFIG_HARD_I2C /* I2C with hardware support */ -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 0 /* slave addr of controller */ -#define CONFIG_SYS_U8500_I2C0_BASE 0x80004000 -#define CONFIG_SYS_U8500_I2C1_BASE 0x80122000 -#define CONFIG_SYS_U8500_I2C2_BASE 0x80128000 -#define CONFIG_SYS_U8500_I2C3_BASE 0x80110000 -#define CONFIG_SYS_U8500_I2C_BUS_MAX 4 - -#define CONFIG_SYS_I2C_GPIOE_ADDR 0x42 /* GPIO expander chip addr */ -#define CONFIG_TC35892_GPIO - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x00000000 /* DDR-SDRAM Bank #1 */ -#define PHYS_SDRAM_SIZE_1 0x20000000 /* 512 MB */ - -/* - * additions for new relocation code - */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE 0x100000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET - -/* landing address before relocation */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0x0 -#endif - -/* - * MMC related configs - * NB Only externa SD slot is currently supported - */ -#define MMC_BLOCK_SIZE 512 -#define CONFIG_ARM_PL180_MMCI -#define CONFIG_ARM_PL180_MMCI_BASE 0x80126000 /* MMC base for 8500 */ -#define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000 -#define CONFIG_MMC_DEV_NUM 1 - -#define CONFIG_CMD_ENV -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET 0x13F80000 -#define CONFIG_SYS_MMC_ENV_DEV 0 /* SLOT2: eMMC */ - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_NO_FLASH - -/* - * base register values for U8500 - */ -#define CFG_PRCMU_BASE 0x80157000 /* Power, reset and clock - management unit */ -#define CFG_FSMC_BASE 0x80000000 /* FSMC Controller */ - -#endif /* __CONFIG_H */ -- 2.39.5