From 75e203584a570fcc1d119f3d6a0f3d381d3d42ca Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 20 Oct 2010 20:48:43 +0200 Subject: [PATCH] PXA: Remove "delta" board Signed-off-by: Marek Vasut --- board/delta/Makefile | 52 ---- board/delta/config.mk | 1 - board/delta/delta.c | 378 ------------------------ board/delta/lowlevel_init.S | 146 ---------- board/delta/nand.c | 558 ------------------------------------ boards.cfg | 1 - include/configs/delta.h | 267 ----------------- 7 files changed, 1403 deletions(-) delete mode 100644 board/delta/Makefile delete mode 100644 board/delta/config.mk delete mode 100644 board/delta/delta.c delete mode 100644 board/delta/lowlevel_init.S delete mode 100644 board/delta/nand.c delete mode 100644 include/configs/delta.h diff --git a/board/delta/Makefile b/board/delta/Makefile deleted file mode 100644 index 648e00c314..0000000000 --- a/board/delta/Makefile +++ /dev/null @@ -1,52 +0,0 @@ - -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).a - -COBJS := delta.o nand.o -SOBJS := lowlevel_init.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/delta/config.mk b/board/delta/config.mk deleted file mode 100644 index 8b24044569..0000000000 --- a/board/delta/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x83008000 diff --git a/board/delta/delta.c b/board/delta/delta.c deleted file mode 100644 index df23076a64..0000000000 --- a/board/delta/delta.c +++ /dev/null @@ -1,378 +0,0 @@ -/* - * (C) Copyright 2006 - * DENX Software Engineering - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ - -static void init_DA9030(void); -static void keys_init(void); -static void get_pressed_keys(uchar *s); -static uchar *key_match(uchar *kbd_data); - -/* - * Miscelaneous platform dependent initialisations - */ - -int board_init (void) -{ - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ - - /* arch number of Lubbock-Board mk@tbd: fix this! */ - gd->bd->bi_arch_number = MACH_TYPE_LUBBOCK; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0xa0000100; - - return 0; -} - -int board_late_init(void) -{ -#ifdef DELTA_CHECK_KEYBD - uchar kbd_data[KEYBD_DATALEN]; - char keybd_env[2 * KEYBD_DATALEN + 1]; - char *str; - int i; -#endif /* DELTA_CHECK_KEYBD */ - - setenv("stdout", "serial"); - setenv("stderr", "serial"); - -#ifdef DELTA_CHECK_KEYBD - keys_init(); - - memset(kbd_data, '\0', KEYBD_DATALEN); - - /* check for pressed keys and setup keybd_env */ - get_pressed_keys(kbd_data); - - for (i = 0; i < KEYBD_DATALEN; ++i) { - sprintf (keybd_env + i + i, "%02X", kbd_data[i]); - } - setenv ("keybd", keybd_env); - - str = strdup ((char *)key_match (kbd_data)); /* decode keys */ - -# ifdef CONFIG_PREBOOT /* automatically configure "preboot" command on key match */ - setenv ("preboot", str); /* set or delete definition */ -# endif /* CONFIG_PREBOOT */ - if (str != NULL) { - free (str); - } -#endif /* DELTA_CHECK_KEYBD */ - - init_DA9030(); - return 0; -} - -/* - * Magic Key Handling, mainly copied from board/lwmon/lwmon.c - */ -#ifdef DELTA_CHECK_KEYBD - -static uchar kbd_magic_prefix[] = "key_magic"; -static uchar kbd_command_prefix[] = "key_cmd"; - -/* - * Get pressed keys - * s is a buffer of size KEYBD_DATALEN-1 - */ -static void get_pressed_keys(uchar *s) -{ - unsigned long val; - val = readl(GPLR3); - - if(val & (1<<31)) - *s++ = KEYBD_KP_DKIN0; - if(val & (1<<18)) - *s++ = KEYBD_KP_DKIN1; - if(val & (1<<29)) - *s++ = KEYBD_KP_DKIN2; - if(val & (1<<22)) - *s++ = KEYBD_KP_DKIN5; -} - -static void keys_init() -{ - writel(readl(CKENB) | CKENB_7_GPIO, CKENB); - udelay(100); - - /* Configure GPIOs */ - writel(0xa840, GPIO127); /* KP_DKIN0 */ - writel(0xa840, GPIO114); /* KP_DKIN1 */ - writel(0xa840, GPIO125); /* KP_DKIN2 */ - writel(0xa840, GPIO118); /* KP_DKIN5 */ - - /* Configure GPIOs as inputs */ - writel(readl(GPDR3) & ~(1<<31 | 1<<18 | 1<<29 | 1<<22), GPDR3); - writel((1<<31 | 1<<18 | 1<<29 | 1<<22), GCDR3); - - udelay(100); -} - -static int compare_magic (uchar *kbd_data, uchar *str) -{ - /* uchar compare[KEYBD_DATALEN-1]; */ - uchar compare[KEYBD_DATALEN]; - char *nxt; - int i; - - /* Don't include modifier byte */ - /* memcpy (compare, kbd_data+1, KEYBD_DATALEN-1); */ - memcpy (compare, kbd_data, KEYBD_DATALEN); - - for (; str != NULL; str = (*nxt) ? (uchar *)(nxt+1) : (uchar *)nxt) { - uchar c; - int k; - - c = (uchar) simple_strtoul ((char *)str, (char **) (&nxt), 16); - - if (str == (uchar *)nxt) { /* invalid character */ - break; - } - - /* - * Check if this key matches the input. - * Set matches to zero, so they match only once - * and we can find duplicates or extra keys - */ - for (k = 0; k < sizeof(compare); ++k) { - if (compare[k] == '\0') /* only non-zero entries */ - continue; - if (c == compare[k]) { /* found matching key */ - compare[k] = '\0'; - break; - } - } - if (k == sizeof(compare)) { - return -1; /* unmatched key */ - } - } - - /* - * A full match leaves no keys in the `compare' array, - */ - for (i = 0; i < sizeof(compare); ++i) { - if (compare[i]) - { - return -1; - } - } - - return 0; -} - - -static uchar *key_match (uchar *kbd_data) -{ - char magic[sizeof (kbd_magic_prefix) + 1]; - uchar *suffix; - char *kbd_magic_keys; - - /* - * The following string defines the characters that can pe appended - * to "key_magic" to form the names of environment variables that - * hold "magic" key codes, i. e. such key codes that can cause - * pre-boot actions. If the string is empty (""), then only - * "key_magic" is checked (old behaviour); the string "125" causes - * checks for "key_magic1", "key_magic2" and "key_magic5", etc. - */ - if ((kbd_magic_keys = getenv ("magic_keys")) == NULL) - kbd_magic_keys = ""; - - /* loop over all magic keys; - * use '\0' suffix in case of empty string - */ - for (suffix=(uchar *)kbd_magic_keys; *suffix || suffix==(uchar *)kbd_magic_keys; ++suffix) { - sprintf (magic, "%s%c", kbd_magic_prefix, *suffix); -#if 0 - printf ("### Check magic \"%s\"\n", magic); -#endif - if (compare_magic(kbd_data, (uchar *)getenv(magic)) == 0) { - char cmd_name[sizeof (kbd_command_prefix) + 1]; - char *cmd; - - sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix); - - cmd = getenv (cmd_name); -#if 0 - printf ("### Set PREBOOT to $(%s): \"%s\"\n", - cmd_name, cmd ? cmd : "<>"); -#endif - *kbd_data = *suffix; - return ((uchar *)cmd); - } - } -#if 0 - printf ("### Delete PREBOOT\n"); -#endif - *kbd_data = '\0'; - return (NULL); -} - -int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - uchar kbd_data[KEYBD_DATALEN]; - char keybd_env[2 * KEYBD_DATALEN + 1]; - int i; - - /* Read keys */ - get_pressed_keys(kbd_data); - puts ("Keys:"); - for (i = 0; i < KEYBD_DATALEN; ++i) { - sprintf (keybd_env + i + i, "%02X", kbd_data[i]); - printf (" %02x", kbd_data[i]); - } - putc ('\n'); - setenv ("keybd", keybd_env); - return 0; -} - -U_BOOT_CMD( - kbd, 1, 1, do_kbd, - "read keyboard status", - "" -); - -#endif /* DELTA_CHECK_KEYBD */ - - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; - gd->bd->bi_dram[2].start = PHYS_SDRAM_3; - gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; - gd->bd->bi_dram[3].start = PHYS_SDRAM_4; - gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE; - - return 0; -} - -void i2c_init_board() -{ - writel(readl(CKENB) | (CKENB_4_I2C), CKENB); - - /* setup I2C GPIO's */ - writel(0x801, GPIO32); /* SCL = Alt. Fkt. 1 */ - writel(0x801, GPIO33); /* SDA = Alt. Fkt. 1 */ -} - -/* initialize the DA9030 Power Controller */ -static void init_DA9030() -{ - uchar addr = (uchar) DA9030_I2C_ADDR, val = 0; - - writel(readl(CKENB) | CKENB_7_GPIO, CKENB); - udelay(100); - - /* Rising Edge on EXTON to reset DA9030 */ - writel(0x8800, GPIO17); /* configure GPIO17, no pullup, -down */ - writel(readl(GPDR0) | (1<<17), GPDR0); /* GPIO17 is output */ - writel((1<<17), GSDR0); - writel((1<<17), GPCR0); /* drive GPIO17 low */ - writel((1<<17), GPSR0); /* drive GPIO17 high */ - -#if CONFIG_SYS_DA9030_EXTON_DELAY - udelay((unsigned long) CONFIG_SYS_DA9030_EXTON_DELAY); /* wait for DA9030 */ -#endif - writel((1<<17), GPCR0); /* drive GPIO17 low */ - - /* reset the watchdog and go active (0xec) */ - val = (SYS_CONTROL_A_HWRES_ENABLE | - (0x6<<4) | - SYS_CONTROL_A_WDOG_ACTION | - SYS_CONTROL_A_WATCHDOG); - if(i2c_write(addr, SYS_CONTROL_A, 1, &val, 1)) { - printf("Error accessing DA9030 via i2c.\n"); - return; - } - - val = 0x80; - if(i2c_write(addr, IRQ_MASK_B, 1, &val, 1)) { - printf("Error accessing DA9030 via i2c.\n"); - return; - } - - i2c_reg_write(addr, REG_CONTROL_1_97, 0xfd); /* disable LDO1, enable LDO6 */ - i2c_reg_write(addr, LDO2_3, 0xd1); /* LDO2 =1,9V, LDO3=3,1V */ - i2c_reg_write(addr, LDO4_5, 0xcc); /* LDO2 =1,9V, LDO3=3,1V */ - i2c_reg_write(addr, LDO6_SIMCP, 0x3e); /* LDO6=3,2V, SIMCP = 5V support */ - i2c_reg_write(addr, LDO7_8, 0xc9); /* LDO7=2,7V, LDO8=3,0V */ - i2c_reg_write(addr, LDO9_12, 0xec); /* LDO9=3,0V, LDO12=3,2V */ - i2c_reg_write(addr, BUCK, 0x0c); /* Buck=1.2V */ - i2c_reg_write(addr, REG_CONTROL_2_98, 0x7f); /* All LDO'S on 8,9,10,11,12,14 */ - i2c_reg_write(addr, LDO_10_11, 0xcc); /* LDO10=3.0V LDO11=3.0V */ - i2c_reg_write(addr, LDO_15, 0xae); /* LDO15=1.8V, dislock first 3bit */ - i2c_reg_write(addr, LDO_14_16, 0x05); /* LDO14=2.8V, LDO16=NB */ - i2c_reg_write(addr, LDO_18_19, 0x9c); /* LDO18=3.0V, LDO19=2.7V */ - i2c_reg_write(addr, LDO_17_SIMCP0, 0x2c); /* LDO17=3.0V, SIMCP=3V support */ - i2c_reg_write(addr, BUCK2_DVC1, 0x9a); /* Buck2=1.5V plus Update support of 520 MHz */ - i2c_reg_write(addr, REG_CONTROL_2_18, 0x43); /* Ball on */ - i2c_reg_write(addr, MISC_CONTROLB, 0x08); /* session valid enable */ - i2c_reg_write(addr, USBPUMP, 0xc1); /* start pump, ignore HW signals */ - - val = i2c_reg_read(addr, STATUS); - if(val & STATUS_CHDET) - printf("Charger detected, turning on LED.\n"); - else { - printf("No charger detetected.\n"); - /* undervoltage? print error and power down */ - } -} - - -#if 0 -/* reset the DA9030 watchdog */ -void hw_watchdog_reset(void) -{ - uchar addr = (uchar) DA9030_I2C_ADDR, val = 0; - val = i2c_reg_read(addr, SYS_CONTROL_A); - val |= SYS_CONTROL_A_WATCHDOG; - i2c_reg_write(addr, SYS_CONTROL_A, val); -} -#endif - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC91111 - rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); -#endif - return rc; -} -#endif diff --git a/board/delta/lowlevel_init.S b/board/delta/lowlevel_init.S deleted file mode 100644 index 1664f3ba17..0000000000 --- a/board/delta/lowlevel_init.S +++ /dev/null @@ -1,146 +0,0 @@ -/* - * (C) Copyright 2006 DENX Software Engineering - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -DRAM_SIZE: .long CONFIG_SYS_DRAM_SIZE - -.macro wait time - ldr r2, =OSCR - mov r3, #0 - str r3, [r2] -0: - ldr r3, [r2] - cmp r3, \time - bls 0b -.endm - -.globl lowlevel_init -lowlevel_init: - /* Set up GPIO pins first */ - mov r10, lr - - /* Configure GPIO Pins 97, 98 UART1 / altern. Fkt. 1 */ - ldr r0, =GPIO97 - ldr r1, =0x801 - str r1, [r0] - - ldr r0, =GPIO98 - ldr r1, =0x801 - str r1, [r0] - - /* tebrandt - ASCR, clear the RDH bit */ - ldr r0, =ASCR - ldr r1, [r0] - bic r1, r1, #0x80000000 - str r1, [r0] - -mem_init: - /* Configure ACCR Register - enable DMEMC Clock at 260 / 2 MHz */ - ldr r0, =ACCR - ldr r1, [r0] - orr r1, r1, #0x3000 - str r1, [r0] - ldr r1, [r0] - - /* 2. Programm MDCNFG, leaving DMCEN de-asserted */ - ldr r0, =MDCNFG - ldr r1, =(MDCNFG_DMAP | MDCNFG_DTYPE | MDCNFG_DTC_2 | MDCNFG_DCSE0 | MDCNFG_DRAC_13) - /* ldr r1, =0x80000403 */ - str r1, [r0] - ldr r1, [r0] /* delay until written */ - - /* 3. wait nop power up waiting period (200ms) - * optimization: Steps 4+6 can be done during this - */ - wait #0x300 - - /* 4. Perform an initial Rcomp-calibration cycle */ - ldr r0, =RCOMP - ldr r1, =0x80000000 - str r1, [r0] - ldr r1, [r0] /* delay until written */ - /* missing: program for automatic rcomp evaluation cycles */ - - /* 5. DDR DRAM strobe delay calibration */ - ldr r0, =DDR_HCAL - ldr r1, =0x88000007 - str r1, [r0] - wait #5 - ldr r1, [r0] /* delay until written */ - - /* Set MDMRS */ - ldr r0, =MDMRS - ldr r1, =0x60000033 - str r1, [r0] - wait #300 - - /* Configure MDREFR */ - ldr r0, =MDREFR - ldr r1, =0x00000006 - str r1, [r0] - ldr r1, [r0] - - /* Enable the dynamic memory controller */ - ldr r0, =MDCNFG - ldr r1, [r0] - orr r1, r1, #MDCNFG_DMCEN - str r1, [r0] - -#ifndef CONFIG_SYS_SKIP_DRAM_SCRUB - /* scrub/init SDRAM if enabled/present */ - ldr r8, =CONFIG_SYS_DRAM_BASE /* base address of SDRAM (CONFIG_SYS_DRAM_BASE) */ - ldr r9, =CONFIG_SYS_DRAM_SIZE /* size of memory to scrub (CONFIG_SYS_DRAM_SIZE) */ - mov r0, #0 /* scrub with 0x0000:0000 */ - mov r1, #0 - mov r2, #0 - mov r3, #0 - mov r4, #0 - mov r5, #0 - mov r6, #0 - mov r7, #0 -10: /* fastScrubLoop */ - subs r9, r9, #32 /* 8 words/line */ - stmia r8!, {r0-r7} - beq 15f - b 10b -#endif /* CONFIG_SYS_SKIP_DRAM_SCRUB */ - -15: - /* Mask all interrupts */ - mov r1, #0 - mcr p6, 0, r1, c1, c0, 0 @ ICMR - - /* Disable software and data breakpoints */ - mov r0, #0 - mcr p15,0,r0,c14,c8,0 /* ibcr0 */ - mcr p15,0,r0,c14,c9,0 /* ibcr1 */ - mcr p15,0,r0,c14,c4,0 /* dbcon */ - - /* Enable all debug functionality */ - mov r0,#0x80000000 - mcr p14,0,r0,c10,c0,0 /* dcsr */ - -endlowlevel_init: - mov pc, lr diff --git a/board/delta/nand.c b/board/delta/nand.c deleted file mode 100644 index 119a587a8d..0000000000 --- a/board/delta/nand.c +++ /dev/null @@ -1,558 +0,0 @@ -/* - * (C) Copyright 2006 DENX Software Engineering - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include - -#if defined(CONFIG_CMD_NAND) - -#include -#include -#include - -#ifdef CONFIG_SYS_DFC_DEBUG1 -# define DFC_DEBUG1(fmt, args...) printf(fmt, ##args) -#else -# define DFC_DEBUG1(fmt, args...) -#endif - -#ifdef CONFIG_SYS_DFC_DEBUG2 -# define DFC_DEBUG2(fmt, args...) printf(fmt, ##args) -#else -# define DFC_DEBUG2(fmt, args...) -#endif - -#ifdef CONFIG_SYS_DFC_DEBUG3 -# define DFC_DEBUG3(fmt, args...) printf(fmt, ##args) -#else -# define DFC_DEBUG3(fmt, args...) -#endif - -/* These really don't belong here, as they are specific to the NAND Model */ -static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; - -static struct nand_bbt_descr delta_bbt_descr = { - .options = 0, - .offs = 0, - .len = 2, - .pattern = scan_ff_pattern -}; - -static struct nand_ecclayout delta_oob = { - .eccbytes = 6, - .eccpos = {2, 3, 4, 5, 6, 7}, - .oobfree = { {8, 2}, {12, 4} } -}; - -/* - * not required for Monahans DFC - */ -static void dfc_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - return; -} - -#if 0 -/* read device ready pin */ -static int dfc_device_ready(struct mtd_info *mtdinfo) -{ - if(NDSR & NDSR_RDY) - return 1; - else - return 0; - return 0; -} -#endif - -/* - * Write buf to the DFC Controller Data Buffer - */ -static void dfc_write_buf(struct mtd_info *mtd, const u_char *buf, int len) -{ - unsigned long bytes_multi = len & 0xfffffffc; - unsigned long rest = len & 0x3; - unsigned long *long_buf; - int i; - - DFC_DEBUG2("dfc_write_buf: writing %d bytes starting with 0x%x.\n", len, *((unsigned long*) buf)); - if(bytes_multi) { - for(i=0; i>j) & 0xff); - } - - return; -} - -/* - * read a word. Not implemented as not used in NAND code. - */ -static u16 dfc_read_word(struct mtd_info *mtd) -{ - printf("dfc_read_word: UNIMPLEMENTED.\n"); - return 0; -} - -/* global var, too bad: mk@tbd: move to ->priv pointer */ -static unsigned long read_buf = 0; -static int bytes_read = -1; - -/* - * read a byte from NDDB Because we can only read 4 bytes from NDDB at - * a time, we buffer the remaining bytes. The buffer is reset when a - * new command is sent to the chip. - * - * WARNING: - * This function is currently only used to read status and id - * bytes. For these commands always 8 bytes need to be read from - * NDDB. So we read and discard these bytes right now. In case this - * function is used for anything else in the future, we must check - * what was the last command issued and read the appropriate amount of - * bytes respectively. - */ -static u_char dfc_read_byte(struct mtd_info *mtd) -{ - unsigned char byte; - unsigned long dummy; - - if(bytes_read < 0) { - read_buf = readl(NDDB); - dummy = readl(NDDB); - bytes_read = 0; - } - byte = (unsigned char) (read_buf>>(8 * bytes_read++)); - if(bytes_read >= 4) - bytes_read = -1; - - DFC_DEBUG2("dfc_read_byte: byte %u: 0x%x of (0x%x).\n", bytes_read - 1, byte, read_buf); - return byte; -} - -/* calculate delta between OSCR values start and now */ -static unsigned long get_delta(unsigned long start) -{ - unsigned long cur = readl(OSCR); - - if(cur < start) /* OSCR overflowed */ - return (cur + (start^0xffffffff)); - else - return (cur - start); -} - -/* delay function, this doesn't belong here */ -static void wait_us(unsigned long us) -{ - unsigned long start = readl(OSCR); - us = DIV_ROUND_UP(us * OSCR_CLK_FREQ, 1000); - - while (get_delta(start) < us) { - /* do nothing */ - } -} - -static void dfc_clear_nddb(void) -{ - writel(readl(NDCR) & ~NDCR_ND_RUN, NDCR); - wait_us(CONFIG_SYS_NAND_OTHER_TO); -} - -/* wait_event with timeout */ -static unsigned long dfc_wait_event(unsigned long event) -{ - unsigned long ndsr, timeout, start = readl(OSCR); - - if(!event) - return 0xff000000; - else if(event & (NDSR_CS0_CMDD | NDSR_CS0_BBD)) - timeout = DIV_ROUND_UP(CONFIG_SYS_NAND_PROG_ERASE_TO - * OSCR_CLK_FREQ, 1000); - else - timeout = DIV_ROUND_UP(CONFIG_SYS_NAND_OTHER_TO - * OSCR_CLK_FREQ, 1000); - - while(1) { - ndsr = readl(NDSR); - if(ndsr & event) { - writel(readl(NDSR) | event, NDSR); - break; - } - if(get_delta(start) > timeout) { - DFC_DEBUG1("dfc_wait_event: TIMEOUT waiting for event: 0x%lx.\n", event); - return 0xff000000; - } - - } - return ndsr; -} - -/* we don't always wan't to do this */ -static void dfc_new_cmd(void) -{ - int retry = 0; - unsigned long status; - - while(retry++ <= CONFIG_SYS_NAND_SENDCMD_RETRY) { - /* Clear NDSR */ - writel(0xfff, NDSR); - - /* set NDCR[NDRUN] */ - if (!(readl(NDCR) & NDCR_ND_RUN)) - writel(readl(NDCR) | NDCR_ND_RUN, NDCR); - - status = dfc_wait_event(NDSR_WRCMDREQ); - - if(status & NDSR_WRCMDREQ) - return; - - DFC_DEBUG2("dfc_new_cmd: FAILED to get WRITECMDREQ, retry: %d.\n", retry); - dfc_clear_nddb(); - } - DFC_DEBUG1("dfc_new_cmd: giving up after %d retries.\n", retry); -} - -/* this function is called after Programm and Erase Operations to - * check for success or failure */ -static int dfc_wait(struct mtd_info *mtd, struct nand_chip *this) -{ - unsigned long ndsr=0, event=0; - int state = this->state; - - if(state == FL_WRITING) { - event = NDSR_CS0_CMDD | NDSR_CS0_BBD; - } else if(state == FL_ERASING) { - event = NDSR_CS0_CMDD | NDSR_CS0_BBD; - } - - ndsr = dfc_wait_event(event); - - if((ndsr & NDSR_CS0_BBD) || (ndsr & 0xff000000)) - return(0x1); /* Status Read error */ - return 0; -} - -/* cmdfunc send commands to the DFC */ -static void dfc_cmdfunc(struct mtd_info *mtd, unsigned command, - int column, int page_addr) -{ - /* register struct nand_chip *this = mtd->priv; */ - unsigned long ndcb0=0, ndcb1=0, ndcb2=0, event=0; - - /* clear the ugly byte read buffer */ - bytes_read = -1; - read_buf = 0; - - switch (command) { - case NAND_CMD_READ0: - DFC_DEBUG3("dfc_cmdfunc: NAND_CMD_READ0, page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1)); - dfc_new_cmd(); - ndcb0 = (NAND_CMD_READ0 | (4<<16)); - column >>= 1; /* adjust for 16 bit bus */ - ndcb1 = (((column>>1) & 0xff) | - ((page_addr<<8) & 0xff00) | - ((page_addr<<8) & 0xff0000) | - ((page_addr<<8) & 0xff000000)); /* make this 0x01000000 ? */ - event = NDSR_RDDREQ; - goto write_cmd; - case NAND_CMD_READ1: - DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_READ1 unimplemented!\n"); - goto end; - case NAND_CMD_READOOB: - DFC_DEBUG1("dfc_cmdfunc: NAND_CMD_READOOB unimplemented!\n"); - goto end; - case NAND_CMD_READID: - dfc_new_cmd(); - DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_READID.\n"); - ndcb0 = (NAND_CMD_READID | (3 << 21) | (1 << 16)); /* addr cycles*/ - event = NDSR_RDDREQ; - goto write_cmd; - case NAND_CMD_PAGEPROG: - /* sent as a multicommand in NAND_CMD_SEQIN */ - DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_PAGEPROG empty due to multicmd.\n"); - goto end; - case NAND_CMD_ERASE1: - DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_ERASE1, page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1)); - dfc_new_cmd(); - ndcb0 = (0xd060 | (1<<25) | (2<<21) | (1<<19) | (3<<16)); - ndcb1 = (page_addr & 0x00ffffff); - goto write_cmd; - case NAND_CMD_ERASE2: - DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_ERASE2 empty due to multicmd.\n"); - goto end; - case NAND_CMD_SEQIN: - /* send PAGE_PROG command(0x1080) */ - dfc_new_cmd(); - DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_SEQIN/PAGE_PROG, page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1)); - ndcb0 = (0x1080 | (1<<25) | (1<<21) | (1<<19) | (4<<16)); - column >>= 1; /* adjust for 16 bit bus */ - ndcb1 = (((column>>1) & 0xff) | - ((page_addr<<8) & 0xff00) | - ((page_addr<<8) & 0xff0000) | - ((page_addr<<8) & 0xff000000)); /* make this 0x01000000 ? */ - event = NDSR_WRDREQ; - goto write_cmd; - case NAND_CMD_STATUS: - DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_STATUS.\n"); - dfc_new_cmd(); - ndcb0 = NAND_CMD_STATUS | (4<<21); - event = NDSR_RDDREQ; - goto write_cmd; - case NAND_CMD_RESET: - DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_RESET.\n"); - ndcb0 = NAND_CMD_RESET | (5<<21); - event = NDSR_CS0_CMDD; - goto write_cmd; - default: - printk("dfc_cmdfunc: error, unsupported command.\n"); - goto end; - } - - write_cmd: - writel(ndcb0, NDCB0); - writel(ndcb1, NDCB0); - writel(ndcb2, NDCB0); - - /* wait_event: */ - dfc_wait_event(event); - end: - return; -} - -static void dfc_gpio_init(void) -{ - DFC_DEBUG2("Setting up DFC GPIO's.\n"); - - /* no idea what is done here, see zylonite.c */ - writel(0x1, GPIO4); - - writel(0x00000001, DF_ALE_nWE1); - writel(0x00000001, DF_ALE_nWE2); - writel(0x00000001, DF_nCS0); - writel(0x00000001, DF_nCS1); - writel(0x00000001, DF_nWE); - writel(0x00000001, DF_nRE); - writel(0x00000001, DF_IO0); - writel(0x00000001, DF_IO8); - writel(0x00000001, DF_IO1); - writel(0x00000001, DF_IO9); - writel(0x00000001, DF_IO2); - writel(0x00000001, DF_IO10); - writel(0x00000001, DF_IO3); - writel(0x00000001, DF_IO11); - writel(0x00000001, DF_IO4); - writel(0x00000001, DF_IO12); - writel(0x00000001, DF_IO5); - writel(0x00000001, DF_IO13); - writel(0x00000001, DF_IO6); - writel(0x00000001, DF_IO14); - writel(0x00000001, DF_IO7); - writel(0x00000001, DF_IO15); - - writel(0x1901, DF_nWE); - writel(0x1901, DF_nRE); - writel(0x1900, DF_CLE_nOE); - writel(0x1901, DF_ALE_nWE1); - writel(0x1900, DF_INT_RnB); -} - -/* - * Board-specific NAND initialization. The following members of the - * argument are board-specific (per include/linux/mtd/nand_new.h): - * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device - * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device - * - hwcontrol: hardwarespecific function for accesing control-lines - * - dev_ready: hardwarespecific function for accesing device ready/busy line - * - enable_hwecc?: function to enable (reset) hardware ecc generator. Must - * only be provided if a hardware ECC is available - * - ecc.mode: mode of ecc, see defines - * - chip_delay: chip dependent delay for transfering data from array to - * read regs (tR) - * - options: various chip options. They can partly be set to inform - * nand_scan about special functionality. See the defines for further - * explanation - * Members with a "?" were not set in the merged testing-NAND branch, - * so they are not set here either. - */ -int board_nand_init(struct nand_chip *nand) -{ - unsigned long tCH, tCS, tWH, tWP, tRH, tRP, tRP_high, tR, tWHR, tAR; - - /* set up GPIO Control Registers */ - dfc_gpio_init(); - - /* turn on the NAND Controller Clock (104 MHz @ D0) */ - writel(readl(CKENA) | (CKENA_4_NAND | CKENA_9_SMC), CKENA); - -#undef CONFIG_SYS_TIMING_TIGHT -#ifndef CONFIG_SYS_TIMING_TIGHT - tCH = MIN(((unsigned long) (NAND_TIMING_tCH * DFC_CLK_PER_US) + 1), - DFC_MAX_tCH); - tCS = MIN(((unsigned long) (NAND_TIMING_tCS * DFC_CLK_PER_US) + 1), - DFC_MAX_tCS); - tWH = MIN(((unsigned long) (NAND_TIMING_tWH * DFC_CLK_PER_US) + 1), - DFC_MAX_tWH); - tWP = MIN(((unsigned long) (NAND_TIMING_tWP * DFC_CLK_PER_US) + 1), - DFC_MAX_tWP); - tRH = MIN(((unsigned long) (NAND_TIMING_tRH * DFC_CLK_PER_US) + 1), - DFC_MAX_tRH); - tRP = MIN(((unsigned long) (NAND_TIMING_tRP * DFC_CLK_PER_US) + 1), - DFC_MAX_tRP); - tR = MIN(((unsigned long) (NAND_TIMING_tR * DFC_CLK_PER_US) + 1), - DFC_MAX_tR); - tWHR = MIN(((unsigned long) (NAND_TIMING_tWHR * DFC_CLK_PER_US) + 1), - DFC_MAX_tWHR); - tAR = MIN(((unsigned long) (NAND_TIMING_tAR * DFC_CLK_PER_US) + 1), - DFC_MAX_tAR); -#else /* this is the tight timing */ - - tCH = MIN(((unsigned long) (NAND_TIMING_tCH * DFC_CLK_PER_US)), - DFC_MAX_tCH); - tCS = MIN(((unsigned long) (NAND_TIMING_tCS * DFC_CLK_PER_US)), - DFC_MAX_tCS); - tWH = MIN(((unsigned long) (NAND_TIMING_tWH * DFC_CLK_PER_US)), - DFC_MAX_tWH); - tWP = MIN(((unsigned long) (NAND_TIMING_tWP * DFC_CLK_PER_US)), - DFC_MAX_tWP); - tRH = MIN(((unsigned long) (NAND_TIMING_tRH * DFC_CLK_PER_US)), - DFC_MAX_tRH); - tRP = MIN(((unsigned long) (NAND_TIMING_tRP * DFC_CLK_PER_US)), - DFC_MAX_tRP); - tR = MIN(((unsigned long) (NAND_TIMING_tR * DFC_CLK_PER_US) - tCH - 2), - DFC_MAX_tR); - tWHR = MIN(((unsigned long) (NAND_TIMING_tWHR * DFC_CLK_PER_US) - tCH - 2), - DFC_MAX_tWHR); - tAR = MIN(((unsigned long) (NAND_TIMING_tAR * DFC_CLK_PER_US) - 2), - DFC_MAX_tAR); -#endif /* CONFIG_SYS_TIMING_TIGHT */ - - - DFC_DEBUG2("tCH=%u, tCS=%u, tWH=%u, tWP=%u, tRH=%u, tRP=%u, tR=%u, tWHR=%u, tAR=%u.\n", tCH, tCS, tWH, tWP, tRH, tRP, tR, tWHR, tAR); - - /* tRP value is split in the register */ - if(tRP & (1 << 4)) { - tRP_high = 1; - tRP &= ~(1 << 4); - } else { - tRP_high = 0; - } - - writel((tCH << 19) | - (tCS << 16) | - (tWH << 11) | - (tWP << 8) | - (tRP_high << 6) | - (tRH << 3) | - (tRP << 0), - NDTR0CS0); - - writel((tR << 16) | - (tWHR << 4) | - (tAR << 0), - NDTR1CS0); - - /* If it doesn't work (unlikely) think about: - * - ecc enable - * - chip select don't care - * - read id byte count - * - * Intentionally enabled by not setting bits: - * - dma (DMA_EN) - * - page size = 512 - * - cs don't care, see if we can enable later! - * - row address start position (after second cycle) - * - pages per block = 32 - * - ND_RDY : clears command buffer - */ - /* NDCR_NCSX | /\* Chip select busy don't care *\/ */ - - writel(NDCR_SPARE_EN | /* use the spare area */ - NDCR_DWIDTH_C | /* 16bit DFC data bus width */ - NDCR_DWIDTH_M | /* 16 bit Flash device data bus width */ - (2 << 16) | /* read id count = 7 ???? mk@tbd */ - NDCR_ND_ARB_EN | /* enable bus arbiter */ - NDCR_RDYM | /* flash device ready ir masked */ - NDCR_CS0_PAGEDM | /* ND_nCSx page done ir masked */ - NDCR_CS1_PAGEDM | - NDCR_CS0_CMDDM | /* ND_CSx command done ir masked */ - NDCR_CS1_CMDDM | - NDCR_CS0_BBDM | /* ND_CSx bad block detect ir masked */ - NDCR_CS1_BBDM | - NDCR_DBERRM | /* double bit error ir masked */ - NDCR_SBERRM | /* single bit error ir masked */ - NDCR_WRDREQM | /* write data request ir masked */ - NDCR_RDDREQM | /* read data request ir masked */ - NDCR_WRCMDREQM, /* write command request ir masked */ - NDCR); - - - /* wait 10 us due to cmd buffer clear reset */ - /* wait(10); */ - - - nand->cmd_ctrl = dfc_hwcontrol; -/* nand->dev_ready = dfc_device_ready; */ - nand->ecc.mode = NAND_ECC_SOFT; - nand->ecc.layout = &delta_oob; - nand->options = NAND_BUSWIDTH_16; - nand->waitfunc = dfc_wait; - nand->read_byte = dfc_read_byte; - nand->read_word = dfc_read_word; - nand->read_buf = dfc_read_buf; - nand->write_buf = dfc_write_buf; - - nand->cmdfunc = dfc_cmdfunc; - nand->badblock_pattern = &delta_bbt_descr; - return 0; -} - -#endif diff --git a/boards.cfg b/boards.cfg index 0f3292fd39..31c4bf05de 100644 --- a/boards.cfg +++ b/boards.cfg @@ -65,7 +65,6 @@ balloon3 arm pxa cerf250 arm pxa cradle arm pxa csb226 arm pxa -delta arm pxa innokom arm pxa lubbock arm pxa palmld arm pxa diff --git a/include/configs/delta.h b/include/configs/delta.h deleted file mode 100644 index d53acbfebc..0000000000 --- a/include/configs/delta.h +++ /dev/null @@ -1,267 +0,0 @@ -/* - * Configuation settings for the Delta board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_CPU_MONAHANS 1 /* Intel Monahan CPU */ -#define CONFIG_CPU_PXA320 -#define CONFIG_DELTA 1 /* Delta board */ - -/* #define CONFIG_LCD 1 */ -#ifdef CONFIG_LCD -#define CONFIG_SHARP_LM8V31 -#endif -#define BOARD_LATE_INIT 1 - -#undef CONFIG_SKIP_RELOCATE_UBOOT -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_NO_DCACHE - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ - -/* - * Hardware drivers - */ -#undef TURN_ON_ETHERNET -#ifdef TURN_ON_ETHERNET -# define CONFIG_DRIVER_SMC91111 1 -# define CONFIG_SMC91111_BASE 0x14000300 -# define CONFIG_SMC91111_EXT_PHY -# define CONFIG_SMC_USE_32_BIT -# undef CONFIG_SMC_USE_IOFUNCS /* just for use with the kernel */ -#endif - -#define CONFIG_HARD_I2C 1 /* required for DA9030 access */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed */ -#define CONFIG_SYS_I2C_SLAVE 1 /* I2C controllers address */ -#define DA9030_I2C_ADDR 0x49 /* I2C address of DA9030 */ -#define CONFIG_SYS_DA9030_EXTON_DELAY 100000 /* wait x us after DA9030 reset via EXTON */ -#define CONFIG_SYS_I2C_INIT_BOARD 1 -/* #define CONFIG_HW_WATCHDOG 1 /\* Required for hitting the DA9030 WD *\/ */ - -#define DELTA_CHECK_KEYBD 1 /* check for keys pressed during boot */ -#define CONFIG_PREBOOT "\0" - -#ifdef DELTA_CHECK_KEYBD -# define KEYBD_DATALEN 4 /* we have four keys */ -# define KEYBD_KP_DKIN0 0x1 /* vol+ */ -# define KEYBD_KP_DKIN1 0x2 /* vol- */ -# define KEYBD_KP_DKIN2 0x3 /* multi */ -# define KEYBD_KP_DKIN5 0x4 /* SWKEY_GN */ -#endif /* DELTA_CHECK_KEYBD */ - -/* - * select serial console configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include - -#ifdef TURN_ON_ETHERNET - -#define CONFIG_CMD_PING - -#else - -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_NAND -#define CONFIG_CMD_I2C - -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS - -#endif - -/* USB */ -#define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_USB_STORAGE 1 -#define CONFIG_DOS_PARTITION 1 - -#include /* for OHCI_REGS_BASE */ - -#undef CONFIG_SYS_USB_OHCI_BOARD_INIT -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 -#define CONFIG_SYS_USB_OHCI_REGS_BASE OHCI_REGS_BASE -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "delta" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3 - -#define CONFIG_BOOTDELAY -1 -#define CONFIG_ETHADDR 08:00:3e:26:0a:5b -#define CONFIG_NETMASK 255.255.0.0 -#define CONFIG_IPADDR 192.168.0.21 -#define CONFIG_SERVERIP 192.168.0.250 -#define CONFIG_BOOTCOMMAND "bootm 80000" -#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200" -#define CONFIG_CMDLINE_TAG -#define CONFIG_TIMESTAMP - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_HUSH_PARSER 1 -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ -#else -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#endif -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_DEVICE_NULLDEV 1 - -#define CONFIG_SYS_MEMTEST_START 0x80400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x80800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DRAM_BASE + 0x8000) /* default load address */ - -#define CONFIG_SYS_HZ 1000 - -/* Monahans Core Frequency */ -#define CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO 16 /* valid values: 8, 16, 24, 31 */ -#define CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO 1 /* valid values: 1, 2 */ - - - /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -#ifdef CONFIG_MMC -#define CONFIG_PXA_MMC -#define CONFIG_CMD_MMC -#define CONFIG_SYS_MMC_BASE 0xF0000000 -#endif - -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ -#define PHYS_SDRAM_1 0x80000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x1000000 /* 64 MB */ -#define PHYS_SDRAM_2 0x81000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x1000000 /* 64 MB */ -#define PHYS_SDRAM_3 0x82000000 /* SDRAM Bank #3 */ -#define PHYS_SDRAM_3_SIZE 0x1000000 /* 64 MB */ -#define PHYS_SDRAM_4 0x83000000 /* SDRAM Bank #4 */ -#define PHYS_SDRAM_4_SIZE 0x1000000 /* 64 MB */ - -#define CONFIG_SYS_DRAM_BASE 0x80000000 /* at CS0 */ -#define CONFIG_SYS_DRAM_SIZE 0x04000000 /* 64 MB Ram */ - -#undef CONFIG_SYS_SKIP_DRAM_SCRUB - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1) - -/* - * NAND Flash - */ -#define CONFIG_SYS_NAND0_BASE 0x0 /* 0x43100040 */ /* 0x10000000 */ -#undef CONFIG_SYS_NAND1_BASE - -#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND0_BASE } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ - -/* nand timeout values */ -#define CONFIG_SYS_NAND_PROG_ERASE_TO 3000 -#define CONFIG_SYS_NAND_OTHER_TO 100 -#define CONFIG_SYS_NAND_SENDCMD_RETRY 3 -#undef NAND_ALLOW_ERASE_ALL /* Allow erasing bad blocks - don't use */ - -/* NAND Timing Parameters (in ns) */ -#define NAND_TIMING_tCH 10 -#define NAND_TIMING_tCS 0 -#define NAND_TIMING_tWH 20 -#define NAND_TIMING_tWP 40 - -#define NAND_TIMING_tRH 20 -#define NAND_TIMING_tRP 40 - -#define NAND_TIMING_tR 11123 -#define NAND_TIMING_tWHR 100 -#define NAND_TIMING_tAR 10 - -/* NAND debugging */ -#define CONFIG_SYS_DFC_DEBUG1 /* usefull */ -#undef CONFIG_SYS_DFC_DEBUG2 /* noisy */ -#undef CONFIG_SYS_DFC_DEBUG3 /* extremly noisy */ - -#define CONFIG_MTD_DEBUG -#define CONFIG_MTD_DEBUG_VERBOSE 1 - -#define CONFIG_SYS_NO_FLASH 1 - -#define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_OFFSET 0x40000 -#define CONFIG_ENV_OFFSET_REDUND 0x44000 -#define CONFIG_ENV_SIZE 0x4000 - -#endif /* __CONFIG_H */ -- 2.39.5