From 7aa1a40876a0da0fadf360a352bba0adf8624904 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Wed, 23 Nov 2016 13:25:29 +0530 Subject: [PATCH] ARM: dts: dra7xx: sync DT with latest Linux Sync all dra7xx based dts files with latest Linux Signed-off-by: Lokesh Vutla Reviewed-by: Tom Rini --- arch/arm/dts/dra7-dspeve-thermal.dtsi | 27 + arch/arm/dts/dra7-evm.dts | 507 +++++++++++++----- arch/arm/dts/dra7-iva-thermal.dtsi | 27 + arch/arm/dts/dra7.dtsi | 717 +++++++++++++++++++++----- arch/arm/dts/dra72-evm-common.dtsi | 353 +++++++------ arch/arm/dts/dra72-evm-revc.dts | 30 +- arch/arm/dts/dra72-evm-tps65917.dtsi | 134 +++++ arch/arm/dts/dra72-evm.dts | 37 +- arch/arm/dts/dra7xx-clocks.dtsi | 425 ++++++++------- include/dt-bindings/clk/ti-dra7-atl.h | 40 ++ include/dt-bindings/pinctrl/dra.h | 26 + 11 files changed, 1683 insertions(+), 640 deletions(-) create mode 100644 arch/arm/dts/dra7-dspeve-thermal.dtsi create mode 100644 arch/arm/dts/dra7-iva-thermal.dtsi create mode 100644 arch/arm/dts/dra72-evm-tps65917.dtsi create mode 100644 include/dt-bindings/clk/ti-dra7-atl.h diff --git a/arch/arm/dts/dra7-dspeve-thermal.dtsi b/arch/arm/dts/dra7-dspeve-thermal.dtsi new file mode 100644 index 0000000000..1c39a8459b --- /dev/null +++ b/arch/arm/dts/dra7-dspeve-thermal.dtsi @@ -0,0 +1,27 @@ +/* + * Device Tree Source for DRA7x SoC DSPEVE thermal + * + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include + +dspeve_thermal: dspeve_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + + /* sensor ID */ + thermal-sensors = <&bandgap 3>; + + trips { + dspeve_crit: dspeve_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; diff --git a/arch/arm/dts/dra7-evm.dts b/arch/arm/dts/dra7-evm.dts index be36d45620..4d882ab338 100644 --- a/arch/arm/dts/dra7-evm.dts +++ b/arch/arm/dts/dra7-evm.dts @@ -9,6 +9,8 @@ #include "dra74x.dtsi" #include +#include +#include / { model = "TI DRA742"; @@ -19,9 +21,9 @@ tick-timer = &timer2; }; - memory { + memory@0 { device_type = "memory"; - reg = <0x80000000 0x60000000>; /* 1536 MB */ + reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */ }; evm_3v3_sd: fixedregulator-sd { @@ -33,13 +35,23 @@ gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>; }; - mmc2_3v3: fixedregulator-mmc2 { + evm_3v3_sw: fixedregulator-evm_3v3_sw { compatible = "regulator-fixed"; - regulator-name = "mmc2_3v3"; + regulator-name = "evm_3v3_sw"; + vin-supply = <&sysen1>; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + aic_dvdd: fixedregulator-aic_dvdd { + /* TPS77018DBVT */ + compatible = "regulator-fixed"; + regulator-name = "aic_dvdd"; + vin-supply = <&evm_3v3_sw>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + extcon_usb1: extcon_usb1 { compatible = "linux,extcon-usb-gpio"; id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; @@ -58,8 +70,89 @@ regulator-always-on; regulator-boot-on; enable-active-high; + vin-supply = <&sysen2>; gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; }; + + sound0: sound0 { + compatible = "simple-audio-card"; + simple-audio-card,name = "DRA7xx-EVM"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line Out", + "Microphone", "Mic Jack", + "Line", "Line In"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE1L", "Line In", + "LINE1R", "Line In"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound0_master>; + simple-audio-card,frame-master = <&sound0_master>; + simple-audio-card,bitclock-inversion; + + sound0_master: simple-audio-card,cpu { + sound-dai = <&mcasp3>; + system-clock-frequency = <5644800>; + }; + + simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + clocks = <&atl_clkin2_ck>; + }; + }; + + leds { + compatible = "gpio-leds"; + led0 { + label = "dra7:usr1"; + gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led1 { + label = "dra7:usr2"; + gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led2 { + label = "dra7:usr3"; + gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led3 { + label = "dra7:usr4"; + gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + USER1 { + label = "btnUser1"; + linux,code = ; + gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>; + }; + + USER2 { + label = "btnUser2"; + linux,code = ; + gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>; + }; + }; }; &dra7_pmx_core { @@ -68,163 +161,149 @@ vtt_pin: pinmux_vtt_pin { pinctrl-single,pins = < - 0x3b4 (PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */ + DRA7XX_CORE_IOPAD(0x37b4, PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */ >; }; i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */ - 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl */ + DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda */ + DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl */ >; }; i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < - 0x408 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */ - 0x40c (PIN_INPUT | MUX_MODE0) /* i2c2_scl */ + DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ + DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ >; }; i2c3_pins: pinmux_i2c3_pins { pinctrl-single,pins = < - 0x288 (PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */ - 0x28c (PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */ + DRA7XX_CORE_IOPAD(0x3688, PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */ + DRA7XX_CORE_IOPAD(0x368c, PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */ >; }; mcspi1_pins: pinmux_mcspi1_pins { pinctrl-single,pins = < - 0x3a4 (PIN_INPUT | MUX_MODE0) /* spi1_sclk */ - 0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */ - 0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */ - 0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */ - 0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */ - 0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */ + DRA7XX_CORE_IOPAD(0x37a4, PIN_INPUT | MUX_MODE0) /* spi1_sclk */ + DRA7XX_CORE_IOPAD(0x37a8, PIN_INPUT | MUX_MODE0) /* spi1_d1 */ + DRA7XX_CORE_IOPAD(0x37ac, PIN_INPUT | MUX_MODE0) /* spi1_d0 */ + DRA7XX_CORE_IOPAD(0x37b0, PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */ + DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */ + DRA7XX_CORE_IOPAD(0x37bc, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */ >; }; mcspi2_pins: pinmux_mcspi2_pins { pinctrl-single,pins = < - 0x3c0 (PIN_INPUT | MUX_MODE0) /* spi2_sclk */ - 0x3c4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */ - 0x3c8 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */ - 0x3cc (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */ + DRA7XX_CORE_IOPAD(0x37c0, PIN_INPUT | MUX_MODE0) /* spi2_sclk */ + DRA7XX_CORE_IOPAD(0x37c4, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */ + DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */ + DRA7XX_CORE_IOPAD(0x37cc, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */ >; }; uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - 0x3e0 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */ - 0x3e4 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */ - 0x3e8 (PIN_INPUT | MUX_MODE3) /* uart1_ctsn */ - 0x3ec (PIN_INPUT | MUX_MODE3) /* uart1_rtsn */ + DRA7XX_CORE_IOPAD(0x37e0, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */ + DRA7XX_CORE_IOPAD(0x37e4, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */ + DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT | MUX_MODE3) /* uart1_ctsn */ + DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT | MUX_MODE3) /* uart1_rtsn */ >; }; uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < - 0x3f0 (PIN_INPUT | MUX_MODE0) /* uart2_rxd */ - 0x3f4 (PIN_INPUT | MUX_MODE0) /* uart2_txd */ - 0x3f8 (PIN_INPUT | MUX_MODE0) /* uart2_ctsn */ - 0x3fc (PIN_INPUT | MUX_MODE0) /* uart2_rtsn */ + DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT | MUX_MODE0) /* uart2_rxd */ + DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT | MUX_MODE0) /* uart2_txd */ + DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT | MUX_MODE0) /* uart2_ctsn */ + DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT | MUX_MODE0) /* uart2_rtsn */ >; }; uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */ - 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */ - >; - }; - - qspi1_pins: pinmux_qspi1_pins { - pinctrl-single,pins = < - 0x4c (PIN_INPUT | MUX_MODE1) /* gpmc_a3.qspi1_cs2 */ - 0x50 (PIN_INPUT | MUX_MODE1) /* gpmc_a4.qspi1_cs3 */ - 0x74 (PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */ - 0x78 (PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */ - 0x7c (PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */ - 0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */ - 0x84 (PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */ - 0x88 (PIN_INPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */ - 0xb8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */ - 0xbc (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */ + DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */ + DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */ >; }; usb1_pins: pinmux_usb1_pins { pinctrl-single,pins = < - 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ + DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ >; }; usb2_pins: pinmux_usb2_pins { pinctrl-single,pins = < - 0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */ + DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */ >; }; nand_flash_x16: nand_flash_x16 { /* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch * So NAND flash requires following switch settings: - * SW5.9 (GPMC_WPN) = LOW - * SW5.1 (NAND_BOOTn) = HIGH */ + * SW5.1 (NAND_BOOTn) = ON (LOW) + * SW5.9 (GPMC_WPN) = OFF (HIGH) + */ pinctrl-single,pins = < - 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ - 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */ - 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */ - 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */ - 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */ - 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */ - 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */ - 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */ - 0x20 (PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */ - 0x24 (PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */ - 0x28 (PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */ - 0x2c (PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */ - 0x30 (PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */ - 0x34 (PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */ - 0x38 (PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */ - 0x3c (PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */ - 0xd8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0 */ - 0xcc (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */ - 0xb4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0 */ - 0xc4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */ - 0xc8 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */ - 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */ + DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ + DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */ + DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */ + DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */ + DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */ + DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */ + DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */ + DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */ + DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */ + DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */ + DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */ + DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */ + DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */ + DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */ + DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */ + DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */ + DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0 */ + DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */ + DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0 */ + DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */ + DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */ + DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */ >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txc.rgmii0_txc */ - 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txctl.rgmii0_txctl */ - 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3.rgmii0_txd3 */ - 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd2.rgmii0_txd2 */ - 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd1.rgmii0_txd1 */ - 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd0.rgmii0_txd0 */ - 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxc.rgmii0_rxc */ - 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii0_rxctl.rgmii0_rxctl */ - 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd3.rgmii0_rxd3 */ - 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd2.rgmii0_rxd2 */ - 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd1.rgmii0_rxd1 */ - 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd0.rgmii0_rxd0 */ + DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txc.rgmii0_txc */ + DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txctl.rgmii0_txctl */ + DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3.rgmii0_txd3 */ + DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd2.rgmii0_txd2 */ + DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd1.rgmii0_txd1 */ + DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd0.rgmii0_txd0 */ + DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0) /* rgmii0_rxc.rgmii0_rxc */ + DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0) /* rgmii0_rxctl.rgmii0_rxctl */ + DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd3.rgmii0_rxd3 */ + DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd2.rgmii0_rxd2 */ + DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd1.rgmii0_rxd1 */ + DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd0.rgmii0_rxd0 */ /* Slave 2 */ - 0x198 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */ - 0x19c (PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */ - 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */ - 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */ - 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */ - 0x1ac (PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */ - 0x1b0 (PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */ - 0x1b4 (PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */ - 0x1b8 (PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ - 0x1bc (PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ - 0x1c0 (PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ - 0x1c4 (PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ + DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */ + DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */ + DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */ + DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */ + DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */ + DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */ + DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */ + DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */ + DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ + DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ + DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ + DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ >; }; @@ -232,60 +311,85 @@ cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 */ - 0x250 (MUX_MODE15) - 0x254 (MUX_MODE15) - 0x258 (MUX_MODE15) - 0x25c (MUX_MODE15) - 0x260 (MUX_MODE15) - 0x264 (MUX_MODE15) - 0x268 (MUX_MODE15) - 0x26c (MUX_MODE15) - 0x270 (MUX_MODE15) - 0x274 (MUX_MODE15) - 0x278 (MUX_MODE15) - 0x27c (MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3650, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3654, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3658, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x365c, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3660, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3664, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3668, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x366c, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3670, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3674, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3678, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x367c, MUX_MODE15) /* Slave 2 */ - 0x198 (MUX_MODE15) - 0x19c (MUX_MODE15) - 0x1a0 (MUX_MODE15) - 0x1a4 (MUX_MODE15) - 0x1a8 (MUX_MODE15) - 0x1ac (MUX_MODE15) - 0x1b0 (MUX_MODE15) - 0x1b4 (MUX_MODE15) - 0x1b8 (MUX_MODE15) - 0x1bc (MUX_MODE15) - 0x1c0 (MUX_MODE15) - 0x1c4 (MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < - 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */ - 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */ + DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < - 0x23c (MUX_MODE15) - 0x240 (MUX_MODE15) + DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15) >; }; dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < - 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ - 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ + DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ + DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ >; }; dcan1_pins_sleep: dcan1_pins_sleep { pinctrl-single,pins = < - 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ - 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */ + DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ + DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */ + >; + }; + + atl_pins: pinmux_atl_pins { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */ + DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */ + >; + }; + + mcasp3_pins: pinmux_mcasp3_pins { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */ + DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */ + DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */ + DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */ + >; + }; + + mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3724, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3728, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x372c, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3730, MUX_MODE15) >; }; }; @@ -317,7 +421,7 @@ /* VDD_DSPEVE */ regulator-name = "smps45"; regulator-min-microvolt = < 850000>; - regulator-max-microvolt = <1150000>; + regulator-max-microvolt = <1250000>; regulator-always-on; regulator-boot-on; }; @@ -335,7 +439,7 @@ /* CORE_VDD */ regulator-name = "smps7"; regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1060000>; + regulator-max-microvolt = <1150000>; regulator-always-on; regulator-boot-on; }; @@ -363,6 +467,7 @@ regulator-name = "ldo1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; + regulator-always-on; regulator-boot-on; }; @@ -392,6 +497,7 @@ regulator-max-microvolt = <1050000>; regulator-always-on; regulator-boot-on; + regulator-allow-bypass; }; ldoln_reg: ldoln { @@ -410,12 +516,48 @@ regulator-max-microvolt = <3300000>; regulator-boot-on; }; + + /* REGEN1 is unused */ + + regen2: regen2 { + /* Needed for PMIC internal resources */ + regulator-name = "regen2"; + regulator-boot-on; + regulator-always-on; + }; + + /* REGEN3 is unused */ + + sysen1: sysen1 { + /* PMIC_REGEN_3V3 */ + regulator-name = "sysen1"; + regulator-boot-on; + regulator-always-on; + }; + + sysen2: sysen2 { + /* PMIC_REGEN_DDR */ + regulator-name = "sysen2"; + regulator-boot-on; + regulator-always-on; + }; }; }; }; + pcf_lcd: gpio@20 { + compatible = "ti,pcf8575", "nxp,pcf8575"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + }; + pcf_gpio_21: gpio@21 { - compatible = "ti,pcf8575"; + compatible = "ti,pcf8575", "nxp,pcf8575"; reg = <0x21>; lines-initial-states = <0x1408>; gpio-controller; @@ -427,6 +569,20 @@ u-boot,i2c-offset-len = <0>; }; + tlv320aic3106: tlv320aic3106@19 { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x19>; + adc-settle-ms = <40>; + ai3x-micbias-vg = <1>; /* 2.0V */ + status = "okay"; + + /* Regulators */ + AVDD-supply = <&evm_3v3_sw>; + IOVDD-supply = <&evm_3v3_sw>; + DRVDD-supply = <&evm_3v3_sw>; + DVDD-supply = <&aic_dvdd>; + }; }; &i2c2 { @@ -434,6 +590,20 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; + + pcf_hdmi: gpio@26 { + compatible = "ti,pcf8575", "nxp,pcf8575"; + reg = <0x26>; + gpio-controller; + #gpio-cells = <2>; + p1 { + /* vin6_sel_s0: high: VIN6, low: audio */ + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "vin6_sel_s0"; + }; + }; }; &i2c3 { @@ -489,7 +659,7 @@ &mmc2 { status = "okay"; - vmmc-supply = <&mmc2_3v3>; + vmmc-supply = <&evm_3v3_sw>; bus-width = <8>; }; @@ -499,12 +669,10 @@ &qspi { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&qspi1_pins>; spi-max-frequency = <76800000>; m25p80@0 { - compatible = "s25fl256s1","spi-flash"; + compatible = "s25fl256s1", "spi-flash"; spi-max-frequency = <76800000>; reg = <0>; spi-tx-bus-width = <1>; @@ -588,9 +756,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&nand_flash_x16>; - ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ + ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* device IO registers */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <16>; @@ -613,7 +786,6 @@ gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-data-mux-bus-ns = <0>; /* MTD partition table */ /* All SPL-* partitions are sized to minimal length @@ -710,3 +882,64 @@ pinctrl-1 = <&dcan1_pins_sleep>; pinctrl-2 = <&dcan1_pins_default>; }; + +&atl { + pinctrl-names = "default"; + pinctrl-0 = <&atl_pins>; + + assigned-clocks = <&abe_dpll_sys_clk_mux>, + <&atl_gfclk_mux>, + <&dpll_abe_ck>, + <&dpll_abe_m2x2_ck>, + <&atl_clkin2_ck>; + assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>; + assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>; + + status = "okay"; + + atl2 { + bws = ; + aws = ; + }; +}; + +&mcasp3 { + #sound-dai-cells = <0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mcasp3_pins>; + pinctrl-1 = <&mcasp3_sleep_pins>; + + assigned-clocks = <&mcasp3_ahclkx_mux>; + assigned-clock-parents = <&atl_clkin2_ck>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializer */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 2 0 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; + }; +}; + +&mailbox6 { + status = "okay"; + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; + mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + status = "okay"; + }; +}; diff --git a/arch/arm/dts/dra7-iva-thermal.dtsi b/arch/arm/dts/dra7-iva-thermal.dtsi new file mode 100644 index 0000000000..dd74a5337d --- /dev/null +++ b/arch/arm/dts/dra7-iva-thermal.dtsi @@ -0,0 +1,27 @@ +/* + * Device Tree Source for DRA7x SoC IVA thermal + * + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include + +iva_thermal: iva_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + + /* sensor ID */ + thermal-sensors = <&bandgap 4>; + + trips { + iva_crit: iva_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; diff --git a/arch/arm/dts/dra7.dtsi b/arch/arm/dts/dra7.dtsi index 0f242e6489..5570e30eb3 100644 --- a/arch/arm/dts/dra7.dtsi +++ b/arch/arm/dts/dra7.dtsi @@ -10,13 +10,11 @@ #include #include -#include "skeleton.dtsi" - #define MAX_SOURCES 400 / { - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; compatible = "ti,dra7xx"; interrupt-parent = <&crossbar_mpu>; @@ -57,10 +55,10 @@ compatible = "arm,cortex-a15-gic"; interrupt-controller; #interrupt-cells = <3>; - reg = <0x48211000 0x1000>, - <0x48212000 0x1000>, - <0x48214000 0x2000>, - <0x48216000 0x2000>; + reg = <0x0 0x48211000 0x0 0x1000>, + <0x0 0x48212000 0x0 0x1000>, + <0x0 0x48214000 0x0 0x2000>, + <0x0 0x48216000 0x0 0x2000>; interrupts = ; interrupt-parent = <&gic>; }; @@ -69,10 +67,37 @@ compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu"; interrupt-controller; #interrupt-cells = <3>; - reg = <0x48281000 0x1000>; + reg = <0x0 0x48281000 0x0 0x1000>; interrupt-parent = <&gic>; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + + operating-points = < + /* kHz uV */ + 1000000 1060000 + 1176000 1160000 + >; + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + + clock-latency = <300000>; /* From omap-cpufreq driver */ + + /* cooling options */ + cooling-min-level = <0>; + cooling-max-level = <2>; + #cooling-cells = <2>; /* min followed by max */ + }; + }; + /* * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. @@ -96,10 +121,10 @@ compatible = "ti,dra7-l3-noc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x0 0x0 0x0 0xc0000000>; ti,hwmods = "l3_main_1", "l3_main_2"; - reg = <0x44000000 0x1000000>, - <0x45000000 0x1000>; + reg = <0x0 0x44000000 0x0 0x1000000>, + <0x0 0x45000000 0x0 0x1000>; interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; @@ -117,13 +142,14 @@ ranges = <0 0x2000 0x2000>; scm_conf: scm_conf@0 { - compatible = "syscon"; + compatible = "syscon", "simple-bus"; reg = <0x0 0x1400>; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0x0 0x1400>; - pbias_regulator: pbias_regulator { - compatible = "ti,pbias-omap"; + pbias_regulator: pbias_regulator@e00 { + compatible = "ti,pbias-dra7", "ti,pbias-omap"; reg = <0xe00 0x4>; syscon = <&scm_conf>; pbias_mmc_reg: pbias_mmc_omap5 { @@ -142,7 +168,7 @@ dra7_pmx_core: pinmux@1400 { compatible = "ti,dra7-padconf", "pinctrl-single"; - reg = <0x1400 0x0464>; + reg = <0x1400 0x0468>; #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; @@ -150,6 +176,34 @@ pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x3fffffff>; }; + + scm_conf1: scm_conf@1c04 { + compatible = "syscon"; + reg = <0x1c04 0x0020>; + }; + + scm_conf_pcie: scm_conf@1c24 { + compatible = "syscon"; + reg = <0x1c24 0x0024>; + }; + + sdma_xbar: dma-router@b78 { + compatible = "ti,dra7-dma-crossbar"; + reg = <0xb78 0xfc>; + #dma-cells = <1>; + dma-requests = <205>; + ti,dma-safe-map = <0>; + dma-masters = <&sdma>; + }; + + edma_xbar: dma-router@c78 { + compatible = "ti,dra7-dma-crossbar"; + reg = <0xc78 0x7c>; + #dma-cells = <2>; + dma-requests = <204>; + ti,dma-safe-map = <0>; + dma-masters = <&edma>; + }; }; cm_core_aon: cm_core_aon@5000 { @@ -204,6 +258,11 @@ prm_clockdomains: clockdomains { }; }; + + scm_wkup: scm_conf@c000 { + compatible = "syscon"; + reg = <0xc000 0x1000>; + }; }; axi@0 { @@ -212,7 +271,7 @@ #address-cells = <1>; ranges = <0x51000000 0x51000000 0x3000 0x0 0x20000000 0x10000000>; - pcie@51000000 { + pcie1: pcie@51000000 { compatible = "ti,dra7-pcie"; reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>; reg-names = "rc_dbics", "ti_conf", "config"; @@ -224,6 +283,7 @@ 0x82000000 0 0x20013000 0x13000 0 0xffed000>; #interrupt-cells = <1>; num-lanes = <1>; + linux,pci-domain = <0>; ti,hwmods = "pcie1"; phys = <&pcie1_phy>; phy-names = "pcie-phy0"; @@ -247,7 +307,7 @@ ranges = <0x51800000 0x51800000 0x3000 0x0 0x30000000 0x10000000>; status = "disabled"; - pcie@51000000 { + pcie@51800000 { compatible = "ti,dra7-pcie"; reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>; reg-names = "rc_dbics", "ti_conf", "config"; @@ -259,6 +319,7 @@ 0x82000000 0 0x30013000 0x13000 0 0xffed000>; #interrupt-cells = <1>; num-lanes = <1>; + linux,pci-domain = <1>; ti,hwmods = "pcie2"; phys = <&pcie2_phy>; phy-names = "pcie-phy0"; @@ -275,6 +336,53 @@ }; }; + ocmcram1: ocmcram@40300000 { + compatible = "mmio-sram"; + reg = <0x40300000 0x80000>; + ranges = <0x0 0x40300000 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + /* + * This is a placeholder for an optional reserved + * region for use by secure software. The size + * of this region is not known until runtime so it + * is set as zero to either be updated to reserve + * space or left unchanged to leave all SRAM for use. + * On HS parts that that require the reserved region + * either the bootloader can update the size to + * the required amount or the node can be overridden + * from the board dts file for the secure platform. + */ + sram-hs@0 { + compatible = "ti,secure-ram"; + reg = <0x0 0x0>; + }; + }; + + /* + * NOTE: ocmcram2 and ocmcram3 are not available on all + * DRA7xx and AM57xx variants. Confirm availability in + * the data manual for the exact part number in use + * before enabling these nodes in the board dts file. + */ + ocmcram2: ocmcram@40400000 { + status = "disabled"; + compatible = "mmio-sram"; + reg = <0x40400000 0x100000>; + ranges = <0x0 0x40400000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ocmcram3: ocmcram@40500000 { + status = "disabled"; + compatible = "mmio-sram"; + reg = <0x40500000 0x100000>; + ranges = <0x0 0x40500000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + }; + bandgap: bandgap@4a0021e0 { reg = <0x4a0021e0 0xc 0x4a00232c 0xc @@ -287,14 +395,9 @@ #thermal-sensor-cells = <1>; }; - dra7_ctrl_core: ctrl_core@4a002000 { + dsp1_system: dsp_system@40d00000 { compatible = "syscon"; - reg = <0x4a002000 0x6d0>; - }; - - dra7_ctrl_general: tisyscon@4a002e00 { - compatible = "syscon"; - reg = <0x4a002e00 0x7c>; + reg = <0x40d00000 0x100>; }; sdma: dma-controller@4a056000 { @@ -309,6 +412,45 @@ dma-requests = <127>; }; + edma: edma@43300000 { + compatible = "ti,edma3-tpcc"; + ti,hwmods = "tpcc"; + reg = <0x43300000 0x100000>; + reg-names = "edma3_cc"; + interrupts = , + , + ; + interrupt-names = "edma3_ccint", "edma3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>; + + /* + * memcpy is disabled, can be enabled with: + * ti,edma-memcpy-channels = <20 21>; + * for example. Note that these channels need to be + * masked in the xbar as well. + */ + }; + + edma_tptc0: tptc@43400000 { + compatible = "ti,edma3-tptc"; + ti,hwmods = "tptc0"; + reg = <0x43400000 0x100000>; + interrupts = ; + interrupt-names = "edma3_tcerrint"; + }; + + edma_tptc1: tptc@43500000 { + compatible = "ti,edma3-tptc"; + ti,hwmods = "tptc1"; + reg = <0x43500000 0x100000>; + interrupts = ; + interrupt-names = "edma3_tcerrint"; + }; + gpio1: gpio@4ae10000 { compatible = "ti,omap4-gpio"; reg = <0x4ae10000 0x200>; @@ -398,79 +540,79 @@ }; uart1: serial@4806a000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x4806a000 0x100>; reg-shift = <2>; interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart1"; clock-frequency = <48000000>; status = "disabled"; - dmas = <&sdma 49>, <&sdma 50>; + dmas = <&sdma_xbar 49>, <&sdma_xbar 50>; dma-names = "tx", "rx"; }; uart2: serial@4806c000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x4806c000 0x100>; reg-shift = <2>; interrupts = ; ti,hwmods = "uart2"; clock-frequency = <48000000>; status = "disabled"; - dmas = <&sdma 51>, <&sdma 52>; + dmas = <&sdma_xbar 51>, <&sdma_xbar 52>; dma-names = "tx", "rx"; }; uart3: serial@48020000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x48020000 0x100>; reg-shift = <2>; interrupts = ; ti,hwmods = "uart3"; clock-frequency = <48000000>; status = "disabled"; - dmas = <&sdma 53>, <&sdma 54>; + dmas = <&sdma_xbar 53>, <&sdma_xbar 54>; dma-names = "tx", "rx"; }; uart4: serial@4806e000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x4806e000 0x100>; reg-shift = <2>; interrupts = ; ti,hwmods = "uart4"; clock-frequency = <48000000>; status = "disabled"; - dmas = <&sdma 55>, <&sdma 56>; + dmas = <&sdma_xbar 55>, <&sdma_xbar 56>; dma-names = "tx", "rx"; }; uart5: serial@48066000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x48066000 0x100>; reg-shift = <2>; interrupts = ; ti,hwmods = "uart5"; clock-frequency = <48000000>; status = "disabled"; - dmas = <&sdma 63>, <&sdma 64>; + dmas = <&sdma_xbar 63>, <&sdma_xbar 64>; dma-names = "tx", "rx"; }; uart6: serial@48068000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x48068000 0x100>; reg-shift = <2>; interrupts = ; ti,hwmods = "uart6"; clock-frequency = <48000000>; status = "disabled"; - dmas = <&sdma 79>, <&sdma 80>; + dmas = <&sdma_xbar 79>, <&sdma_xbar 80>; dma-names = "tx", "rx"; }; uart7: serial@48420000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x48420000 0x100>; reg-shift = <2>; interrupts = ; @@ -480,7 +622,7 @@ }; uart8: serial@48422000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x48422000 0x100>; reg-shift = <2>; interrupts = ; @@ -490,7 +632,7 @@ }; uart9: serial@48424000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x48424000 0x100>; reg-shift = <2>; interrupts = ; @@ -500,7 +642,7 @@ }; uart10: serial@4ae2b000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x4ae2b000 0x100>; reg-shift = <2>; interrupts = ; @@ -768,12 +910,20 @@ ti,hwmods = "timer11"; }; + timer12: timer@4ae20000 { + compatible = "ti,omap5430-timer"; + reg = <0x4ae20000 0x80>; + interrupts = ; + ti,hwmods = "timer12"; + ti,timer-alwon; + ti,timer-secure; + }; + timer13: timer@48828000 { compatible = "ti,omap5430-timer"; reg = <0x48828000 0x80>; interrupts = ; ti,hwmods = "timer13"; - status = "disabled"; }; timer14: timer@4882a000 { @@ -781,7 +931,6 @@ reg = <0x4882a000 0x80>; interrupts = ; ti,hwmods = "timer14"; - status = "disabled"; }; timer15: timer@4882c000 { @@ -789,7 +938,6 @@ reg = <0x4882c000 0x80>; interrupts = ; ti,hwmods = "timer15"; - status = "disabled"; }; timer16: timer@4882e000 { @@ -797,7 +945,6 @@ reg = <0x4882e000 0x80>; interrupts = ; ti,hwmods = "timer16"; - status = "disabled"; }; wdt2: wdt@4ae14000 { @@ -878,7 +1025,7 @@ ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; - dmas = <&sdma 61>, <&sdma 62>; + dmas = <&sdma_xbar 61>, <&sdma_xbar 62>; dma-names = "tx", "rx"; status = "disabled"; pbias-supply = <&pbias_mmc_reg>; @@ -890,7 +1037,7 @@ interrupts = ; ti,hwmods = "mmc2"; ti,needs-special-reset; - dmas = <&sdma 47>, <&sdma 48>; + dmas = <&sdma_xbar 47>, <&sdma_xbar 48>; dma-names = "tx", "rx"; status = "disabled"; }; @@ -901,7 +1048,7 @@ interrupts = ; ti,hwmods = "mmc3"; ti,needs-special-reset; - dmas = <&sdma 77>, <&sdma 78>; + dmas = <&sdma_xbar 77>, <&sdma_xbar 78>; dma-names = "tx", "rx"; status = "disabled"; }; @@ -912,11 +1059,51 @@ interrupts = ; ti,hwmods = "mmc4"; ti,needs-special-reset; - dmas = <&sdma 57>, <&sdma 58>; + dmas = <&sdma_xbar 57>, <&sdma_xbar 58>; dma-names = "tx", "rx"; status = "disabled"; }; + mmu0_dsp1: mmu@40d01000 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x40d01000 0x100>; + interrupts = ; + ti,hwmods = "mmu0_dsp1"; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp1_system 0x0>; + status = "disabled"; + }; + + mmu1_dsp1: mmu@40d02000 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x40d02000 0x100>; + interrupts = ; + ti,hwmods = "mmu1_dsp1"; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp1_system 0x1>; + status = "disabled"; + }; + + mmu_ipu1: mmu@58882000 { + compatible = "ti,dra7-iommu"; + reg = <0x58882000 0x100>; + interrupts = ; + ti,hwmods = "mmu_ipu1"; + #iommu-cells = <0>; + ti,iommu-bus-err-back; + status = "disabled"; + }; + + mmu_ipu2: mmu@55082000 { + compatible = "ti,dra7-iommu"; + reg = <0x55082000 0x100>; + interrupts = ; + ti,hwmods = "mmu_ipu2"; + #iommu-cells = <0>; + ti,iommu-bus-err-back; + status = "disabled"; + }; + abb_mpu: regulator-abb-mpu { compatible = "ti,abb-v3"; regulator-name = "abb_mpu"; @@ -1057,14 +1244,14 @@ #size-cells = <0>; ti,hwmods = "mcspi1"; ti,spi-num-cs = <4>; - dmas = <&sdma 35>, - <&sdma 36>, - <&sdma 37>, - <&sdma 38>, - <&sdma 39>, - <&sdma 40>, - <&sdma 41>, - <&sdma 42>; + dmas = <&sdma_xbar 35>, + <&sdma_xbar 36>, + <&sdma_xbar 37>, + <&sdma_xbar 38>, + <&sdma_xbar 39>, + <&sdma_xbar 40>, + <&sdma_xbar 41>, + <&sdma_xbar 42>; dma-names = "tx0", "rx0", "tx1", "rx1", "tx2", "rx2", "tx3", "rx3"; status = "disabled"; @@ -1078,10 +1265,10 @@ #size-cells = <0>; ti,hwmods = "mcspi2"; ti,spi-num-cs = <2>; - dmas = <&sdma 43>, - <&sdma 44>, - <&sdma 45>, - <&sdma 46>; + dmas = <&sdma_xbar 43>, + <&sdma_xbar 44>, + <&sdma_xbar 45>, + <&sdma_xbar 46>; dma-names = "tx0", "rx0", "tx1", "rx1"; status = "disabled"; }; @@ -1094,7 +1281,7 @@ #size-cells = <0>; ti,hwmods = "mcspi3"; ti,spi-num-cs = <2>; - dmas = <&sdma 15>, <&sdma 16>; + dmas = <&sdma_xbar 15>, <&sdma_xbar 16>; dma-names = "tx0", "rx0"; status = "disabled"; }; @@ -1107,7 +1294,7 @@ #size-cells = <0>; ti,hwmods = "mcspi4"; ti,spi-num-cs = <1>; - dmas = <&sdma 70>, <&sdma 71>; + dmas = <&sdma_xbar 70>, <&sdma_xbar 71>; dma-names = "tx0", "rx0"; status = "disabled"; }; @@ -1115,10 +1302,9 @@ qspi: qspi@4b300000 { compatible = "ti,dra7xxx-qspi"; reg = <0x4b300000 0x100>, - <0x5c000000 0x4000000>, - <0x4a002558 0x4>; - reg-names = "qspi_base", "qspi_mmap", - "qspi_ctrlmod"; + <0x5c000000 0x4000000>; + reg-names = "qspi_base", "qspi_mmap"; + syscon-chipselects = <&scm_conf 0x558>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "qspi"; @@ -1129,14 +1315,6 @@ status = "disabled"; }; - omap_control_sata: control-phy@4a002374 { - compatible = "ti,control-phy-pipe3"; - reg = <0x4a002374 0x4>; - reg-names = "power"; - clocks = <&sys_clkin1>; - clock-names = "sysclk"; - }; - /* OCP2SCP3 */ ocp2scp@4a090000 { compatible = "ti,omap-ocp2scp"; @@ -1151,9 +1329,10 @@ <0x4A096400 0x64>, /* phy_tx */ <0x4A096800 0x40>; /* pll_ctrl */ reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - ctrl-module = <&omap_control_sata>; + syscon-phy-power = <&scm_conf 0x374>; clocks = <&sys_clkin1>, <&sata_ref_clk>; clock-names = "sysclk", "refclk"; + syscon-pllreset = <&scm_conf 0x3fc>; #phy-cells = <0>; }; @@ -1162,16 +1341,18 @@ reg = <0x4a094000 0x80>, /* phy_rx */ <0x4a094400 0x64>; /* phy_tx */ reg-names = "phy_rx", "phy_tx"; - ctrl-module = <&omap_control_pcie1phy>; + syscon-phy-power = <&scm_conf_pcie 0x1c>; + syscon-pcs = <&scm_conf_pcie 0x10>; clocks = <&dpll_pcie_ref_ck>, <&dpll_pcie_ref_m2ldo_ck>, <&optfclk_pciephy1_32khz>, <&optfclk_pciephy1_clk>, <&optfclk_pciephy1_div_clk>, - <&optfclk_pciephy_div>; + <&optfclk_pciephy_div>, + <&sys_clkin1>; clock-names = "dpll_ref", "dpll_ref_m2", "wkupclk", "refclk", - "div-clk", "phy-div"; + "div-clk", "phy-div", "sysclk"; #phy-cells = <0>; }; @@ -1180,16 +1361,18 @@ reg = <0x4a095000 0x80>, /* phy_rx */ <0x4a095400 0x64>; /* phy_tx */ reg-names = "phy_rx", "phy_tx"; - ctrl-module = <&omap_control_pcie2phy>; + syscon-phy-power = <&scm_conf_pcie 0x20>; + syscon-pcs = <&scm_conf_pcie 0x10>; clocks = <&dpll_pcie_ref_ck>, <&dpll_pcie_ref_m2ldo_ck>, <&optfclk_pciephy2_32khz>, <&optfclk_pciephy2_clk>, <&optfclk_pciephy2_div_clk>, - <&optfclk_pciephy_div>; + <&optfclk_pciephy_div>, + <&sys_clkin1>; clock-names = "dpll_ref", "dpll_ref_m2", "wkupclk", "refclk", - "div-clk", "phy-div"; + "div-clk", "phy-div", "sysclk"; #phy-cells = <0>; status = "disabled"; }; @@ -1205,23 +1388,6 @@ ti,hwmods = "sata"; }; - omap_control_pcie1phy: control-phy@0x4a003c40 { - compatible = "ti,control-phy-pcie"; - reg = <0x4a003c40 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>; - reg-names = "power", "control_sma", "pcie_pcs"; - clocks = <&sys_clkin1>; - clock-names = "sysclk"; - }; - - omap_control_pcie2phy: control-pcie@0x4a003c44 { - compatible = "ti,control-phy-pcie"; - reg = <0x4a003c44 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>; - reg-names = "power", "control_sma", "pcie_pcs"; - clocks = <&sys_clkin1>; - clock-names = "sysclk"; - status = "disabled"; - }; - rtc: rtc@48838000 { compatible = "ti,am3352-rtc"; reg = <0x48838000 0x100>; @@ -1231,24 +1397,6 @@ clocks = <&sys_32k_ck>; }; - omap_control_usb2phy1: control-phy@4a002300 { - compatible = "ti,control-phy-usb2"; - reg = <0x4a002300 0x4>; - reg-names = "power"; - }; - - omap_control_usb3phy1: control-phy@4a002370 { - compatible = "ti,control-phy-pipe3"; - reg = <0x4a002370 0x4>; - reg-names = "power"; - }; - - omap_control_usb2phy2: control-phy@0x4a002e74 { - compatible = "ti,control-phy-usb2-dra7"; - reg = <0x4a002e74 0x4>; - reg-names = "power"; - }; - /* OCP2SCP1 */ ocp2scp@4a080000 { compatible = "ti,omap-ocp2scp"; @@ -1259,9 +1407,9 @@ ti,hwmods = "ocp2scp1"; usb2_phy1: phy@4a084000 { - compatible = "ti,omap-usb2"; + compatible = "ti,dra7x-usb2", "ti,omap-usb2"; reg = <0x4a084000 0x400>; - ctrl-module = <&omap_control_usb2phy1>; + syscon-phy-power = <&scm_conf 0x300>; clocks = <&usb_phy1_always_on_clk32k>, <&usb_otg_ss1_refclk960m>; clock-names = "wkupclk", @@ -1270,9 +1418,10 @@ }; usb2_phy2: phy@4a085000 { - compatible = "ti,omap-usb2"; + compatible = "ti,dra7x-usb2-phy2", + "ti,omap-usb2"; reg = <0x4a085000 0x400>; - ctrl-module = <&omap_control_usb2phy2>; + syscon-phy-power = <&scm_conf 0xe74>; clocks = <&usb_phy2_always_on_clk32k>, <&usb_otg_ss2_refclk960m>; clock-names = "wkupclk", @@ -1286,7 +1435,7 @@ <0x4a084800 0x64>, <0x4a084c00 0x40>; reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - ctrl-module = <&omap_control_usb3phy1>; + syscon-phy-power = <&scm_conf 0x370>; clocks = <&usb_phy3_always_on_clk32k>, <&sys_clkin1>, <&usb_otg_ss1_refclk960m>; @@ -1309,10 +1458,14 @@ usb1: usb@48890000 { compatible = "snps,dwc3"; reg = <0x48890000 0x17000>; - interrupts = ; + interrupts = , + , + ; + interrupt-names = "peripheral", + "host", + "otg"; phys = <&usb2_phy1>, <&usb3_phy1>; phy-names = "usb2-phy", "usb3-phy"; - tx-fifo-resize; maximum-speed = "super-speed"; dr_mode = "otg"; snps,dis_u3_susphy_quirk; @@ -1332,10 +1485,14 @@ usb2: usb@488d0000 { compatible = "snps,dwc3"; reg = <0x488d0000 0x17000>; - interrupts = ; + interrupts = , + , + ; + interrupt-names = "peripheral", + "host", + "otg"; phys = <&usb2_phy2>; phy-names = "usb2-phy"; - tx-fifo-resize; maximum-speed = "high-speed"; dr_mode = "otg"; snps,dis_u3_susphy_quirk; @@ -1357,8 +1514,12 @@ usb3: usb@48910000 { compatible = "snps,dwc3"; reg = <0x48910000 0x17000>; - interrupts = ; - tx-fifo-resize; + interrupts = , + , + ; + interrupt-names = "peripheral", + "host", + "otg"; maximum-speed = "high-speed"; dr_mode = "otg"; snps,dis_u3_susphy_quirk; @@ -1379,10 +1540,16 @@ ti,hwmods = "gpmc"; reg = <0x50000000 0x37c>; /* device IO registers */ interrupts = ; + dmas = <&edma_xbar 4 0>; + dma-names = "rxtx"; gpmc,num-cs = <8>; gpmc,num-waitpins = <2>; #address-cells = <2>; #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; status = "disabled"; }; @@ -1397,6 +1564,136 @@ status = "disabled"; }; + mcasp1: mcasp@48460000 { + compatible = "ti,dra7-mcasp-audio"; + ti,hwmods = "mcasp1"; + reg = <0x48460000 0x2000>, + <0x45800000 0x1000>; + reg-names = "mpu","dat"; + interrupts = , + ; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>; + dma-names = "tx", "rx"; + clocks = <&mcasp1_aux_gfclk_mux>, <&mcasp1_ahclkx_mux>, + <&mcasp1_ahclkr_mux>; + clock-names = "fck", "ahclkx", "ahclkr"; + status = "disabled"; + }; + + mcasp2: mcasp@48464000 { + compatible = "ti,dra7-mcasp-audio"; + ti,hwmods = "mcasp2"; + reg = <0x48464000 0x2000>, + <0x45c00000 0x1000>; + reg-names = "mpu","dat"; + interrupts = , + ; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>; + dma-names = "tx", "rx"; + clocks = <&mcasp2_aux_gfclk_mux>, <&mcasp2_ahclkx_mux>, + <&mcasp2_ahclkr_mux>; + clock-names = "fck", "ahclkx", "ahclkr"; + status = "disabled"; + }; + + mcasp3: mcasp@48468000 { + compatible = "ti,dra7-mcasp-audio"; + ti,hwmods = "mcasp3"; + reg = <0x48468000 0x2000>, + <0x46000000 0x1000>; + reg-names = "mpu","dat"; + interrupts = , + ; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>; + dma-names = "tx", "rx"; + clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>; + clock-names = "fck", "ahclkx"; + status = "disabled"; + }; + + mcasp4: mcasp@4846c000 { + compatible = "ti,dra7-mcasp-audio"; + ti,hwmods = "mcasp4"; + reg = <0x4846c000 0x2000>, + <0x48436000 0x1000>; + reg-names = "mpu","dat"; + interrupts = , + ; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>; + dma-names = "tx", "rx"; + clocks = <&mcasp4_aux_gfclk_mux>, <&mcasp4_ahclkx_mux>; + clock-names = "fck", "ahclkx"; + status = "disabled"; + }; + + mcasp5: mcasp@48470000 { + compatible = "ti,dra7-mcasp-audio"; + ti,hwmods = "mcasp5"; + reg = <0x48470000 0x2000>, + <0x4843a000 0x1000>; + reg-names = "mpu","dat"; + interrupts = , + ; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>; + dma-names = "tx", "rx"; + clocks = <&mcasp5_aux_gfclk_mux>, <&mcasp5_ahclkx_mux>; + clock-names = "fck", "ahclkx"; + status = "disabled"; + }; + + mcasp6: mcasp@48474000 { + compatible = "ti,dra7-mcasp-audio"; + ti,hwmods = "mcasp6"; + reg = <0x48474000 0x2000>, + <0x4844c000 0x1000>; + reg-names = "mpu","dat"; + interrupts = , + ; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>; + dma-names = "tx", "rx"; + clocks = <&mcasp6_aux_gfclk_mux>, <&mcasp6_ahclkx_mux>; + clock-names = "fck", "ahclkx"; + status = "disabled"; + }; + + mcasp7: mcasp@48478000 { + compatible = "ti,dra7-mcasp-audio"; + ti,hwmods = "mcasp7"; + reg = <0x48478000 0x2000>, + <0x48450000 0x1000>; + reg-names = "mpu","dat"; + interrupts = , + ; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>; + dma-names = "tx", "rx"; + clocks = <&mcasp7_aux_gfclk_mux>, <&mcasp7_ahclkx_mux>; + clock-names = "fck", "ahclkx"; + status = "disabled"; + }; + + mcasp8: mcasp@4847c000 { + compatible = "ti,dra7-mcasp-audio"; + ti,hwmods = "mcasp8"; + reg = <0x4847c000 0x2000>, + <0x48454000 0x1000>; + reg-names = "mpu","dat"; + interrupts = , + ; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>; + dma-names = "tx", "rx"; + clocks = <&mcasp8_aux_gfclk_mux>, <&mcasp8_ahclkx_mux>; + clock-names = "fck", "ahclkx"; + status = "disabled"; + }; + crossbar_mpu: crossbar@4a002a48 { compatible = "ti,irq-crossbar"; reg = <0x4a002a48 0x130>; @@ -1412,25 +1709,34 @@ }; mac: ethernet@48484000 { - compatible = "ti,cpsw"; + compatible = "ti,dra7-cpsw","ti,cpsw"; ti,hwmods = "gmac"; - clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>; + clocks = <&gmac_main_clk>, <&gmac_rft_clk_mux>; clock-names = "fck", "cpts"; cpdma_channels = <8>; ale_entries = <1024>; bd_ram_size = <0x2000>; no_bd_ram = <0>; - rx_descs = <64>; mac_control = <0x20>; slaves = <2>; active_slave = <0>; - cpts_clock_mult = <0x80000000>; + cpts_clock_mult = <0x784CFE14>; cpts_clock_shift = <29>; syscon = <&scm_conf>; reg = <0x48484000 0x1000 0x48485200 0x2E00>; #address-cells = <1>; #size-cells = <1>; + + /* + * Do not allow gating of cpsw clock as workaround + * for errata i877. Keeping internal clock disabled + * causes the device switching characteristics + * to degrade over time and eventually fail to meet + * the data manual delay time/skew specs. + */ + ti,no-idle; + /* * rx_thresh_pend * rx_pend @@ -1445,7 +1751,7 @@ status = "disabled"; davinci_mdio: mdio@48485000 { - compatible = "ti,davinci_mdio"; + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "davinci_mdio"; @@ -1527,12 +1833,157 @@ clock-names = "fck", "sys_clk"; }; }; + + epwmss0: epwmss@4843e000 { + compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"; + reg = <0x4843e000 0x30>; + ti,hwmods = "epwmss0"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges; + + ehrpwm0: pwm@4843e200 { + compatible = "ti,dra746-ehrpwm", + "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x4843e200 0x80>; + clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + + ecap0: ecap@4843e100 { + compatible = "ti,dra746-ecap", + "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x4843e100 0x80>; + clocks = <&l4_root_clk_div>; + clock-names = "fck"; + status = "disabled"; + }; + }; + + epwmss1: epwmss@48440000 { + compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"; + reg = <0x48440000 0x30>; + ti,hwmods = "epwmss1"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges; + + ehrpwm1: pwm@48440200 { + compatible = "ti,dra746-ehrpwm", + "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x48440200 0x80>; + clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + + ecap1: ecap@48440100 { + compatible = "ti,dra746-ecap", + "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x48440100 0x80>; + clocks = <&l4_root_clk_div>; + clock-names = "fck"; + status = "disabled"; + }; + }; + + epwmss2: epwmss@48442000 { + compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"; + reg = <0x48442000 0x30>; + ti,hwmods = "epwmss2"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges; + + ehrpwm2: pwm@48442200 { + compatible = "ti,dra746-ehrpwm", + "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x48442200 0x80>; + clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + + ecap2: ecap@48442100 { + compatible = "ti,dra746-ecap", + "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x48442100 0x80>; + clocks = <&l4_root_clk_div>; + clock-names = "fck"; + status = "disabled"; + }; + }; + + aes1: aes@4b500000 { + compatible = "ti,omap4-aes"; + ti,hwmods = "aes1"; + reg = <0x4b500000 0xa0>; + interrupts = ; + dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>; + dma-names = "tx", "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; + + aes2: aes@4b700000 { + compatible = "ti,omap4-aes"; + ti,hwmods = "aes2"; + reg = <0x4b700000 0xa0>; + interrupts = ; + dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>; + dma-names = "tx", "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; + + des: des@480a5000 { + compatible = "ti,omap4-des"; + ti,hwmods = "des"; + reg = <0x480a5000 0xa0>; + interrupts = ; + dmas = <&sdma_xbar 117>, <&sdma_xbar 116>; + dma-names = "tx", "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; + + sham: sham@53100000 { + compatible = "ti,omap5-sham"; + ti,hwmods = "sham"; + reg = <0x4b101000 0x300>; + interrupts = ; + dmas = <&edma_xbar 119 0>; + dma-names = "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; + + rng: rng@48090000 { + compatible = "ti,omap4-rng"; + ti,hwmods = "rng"; + reg = <0x48090000 0x2000>; + interrupts = ; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; }; thermal_zones: thermal-zones { #include "omap4-cpu-thermal.dtsi" #include "omap5-gpu-thermal.dtsi" #include "omap5-core-thermal.dtsi" + #include "dra7-dspeve-thermal.dtsi" + #include "dra7-iva-thermal.dtsi" }; }; diff --git a/arch/arm/dts/dra72-evm-common.dtsi b/arch/arm/dts/dra72-evm-common.dtsi index 1e1ca72557..c83f87fa79 100644 --- a/arch/arm/dts/dra72-evm-common.dtsi +++ b/arch/arm/dts/dra72-evm-common.dtsi @@ -1,5 +1,5 @@ /* - * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -9,24 +9,82 @@ #include "dra72x.dtsi" #include +#include / { compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7"; + aliases { + display0 = &hdmi0; + }; + chosen { stdout-path = &uart1; tick-timer = &timer2; }; - aliases { - display0 = &hdmi0; + evm_12v0: fixedregulator-evm12v0 { + /* main supply */ + compatible = "regulator-fixed"; + regulator-name = "evm_12v0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + evm_5v0: fixedregulator-evm5v0 { + /* Output 1 of TPS43351QDAPRQ1 on dra72-evm */ + /* Output 1 of LM5140QRWGTQ1 on dra71-evm */ + compatible = "regulator-fixed"; + regulator-name = "evm_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&evm_12v0>; + regulator-always-on; + regulator-boot-on; }; - evm_3v3: fixedregulator-evm_3v3 { + vsys_3v3: fixedregulator-vsys3v3 { + /* Output 2 of TPS43351QDAPRQ1 on dra72-evm */ + /* Output 2 of LM5140QRWGTQ1 on dra71-evm */ + compatible = "regulator-fixed"; + regulator-name = "vsys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&evm_12v0>; + regulator-always-on; + regulator-boot-on; + }; + + evm_3v3_sw: fixedregulator-evm_3v3 { + /* TPS22965DSG */ compatible = "regulator-fixed"; regulator-name = "evm_3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_3v3>; + regulator-always-on; + regulator-boot-on; + }; + + aic_dvdd: fixedregulator-aic_dvdd { + /* TPS77018DBVT */ + compatible = "regulator-fixed"; + regulator-name = "aic_dvdd"; + vin-supply = <&evm_3v3_sw>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + evm_3v3_sd: fixedregulator-sd { + compatible = "regulator-fixed"; + regulator-name = "evm_3v3_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&evm_3v3_sw>; + enable-active-high; + gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>; }; extcon_usb1: extcon_usb1 { @@ -80,46 +138,81 @@ }; }; }; + + sound0: sound0 { + compatible = "simple-audio-card"; + simple-audio-card,name = "DRA7xx-EVM"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line Out", + "Microphone", "Mic Jack", + "Line", "Line In"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE1L", "Line In", + "LINE1R", "Line In"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound0_master>; + simple-audio-card,frame-master = <&sound0_master>; + simple-audio-card,bitclock-inversion; + + sound0_master: simple-audio-card,cpu { + sound-dai = <&mcasp3>; + system-clock-frequency = <5644800>; + }; + + simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + clocks = <&atl_clkin2_ck>; + }; + }; }; &dra7_pmx_core { mmc1_pins_default: mmc1_pins_default { pinctrl-single,pins = < - 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ - 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ - 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ - 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ - 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ - 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ >; }; mmc2_pins_default: mmc2_pins_default { pinctrl-single,pins = < - 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ - 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ - 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ - 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ - 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ - 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ - 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ - 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ - 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ - 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ >; }; dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < - 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ - 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ + DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ + DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ >; }; dcan1_pins_sleep: dcan1_pins_sleep { pinctrl-single,pins = < - 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ - 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */ + DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ + DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */ >; }; }; @@ -128,123 +221,31 @@ status = "okay"; clock-frequency = <400000>; - tps65917: tps65917@58 { - compatible = "ti,tps65917"; - reg = <0x58>; - - interrupts = ; /* IRQ_SYS_1N */ - interrupt-controller; - #interrupt-cells = <2>; - - ti,system-power-controller; - - tps65917_pmic { - compatible = "ti,tps65917-pmic"; - - tps65917_regulators: regulators { - smps1_reg: smps1 { - /* VDD_MPU */ - regulator-name = "smps1"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-always-on; - regulator-boot-on; - }; - - smps2_reg: smps2 { - /* VDD_CORE */ - regulator-name = "smps2"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1060000>; - regulator-boot-on; - regulator-always-on; - }; - - smps3_reg: smps3 { - /* VDD_GPU IVA DSPEVE */ - regulator-name = "smps3"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-boot-on; - regulator-always-on; - }; - - smps4_reg: smps4 { - /* VDDS1V8 */ - regulator-name = "smps4"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - smps5_reg: smps5 { - /* VDD_DDR */ - regulator-name = "smps5"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo1_reg: ldo1 { - /* LDO1_OUT --> SDIO */ - regulator-name = "ldo1"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - regulator-allow-bypass; - }; - - ldo3_reg: ldo3 { - /* VDDA_1V8_PHY */ - regulator-name = "ldo3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo5_reg: ldo5 { - /* VDDA_1V8_PLL */ - regulator-name = "ldo5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo4_reg: ldo4 { - /* VDDA_3V_USB: VDDA_USBHS33 */ - regulator-name = "ldo4"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - }; - }; - - tps65917_power_button { - compatible = "ti,palmas-pwrbutton"; - interrupt-parent = <&tps65917>; - interrupts = <1 IRQ_TYPE_NONE>; - wakeup-source; - ti,palmas-long-press-seconds = <6>; - }; - }; - pcf_gpio_21: gpio@21 { - compatible = "ti,pcf8575"; + compatible = "ti,pcf8575", "nxp,pcf8575"; u-boot,i2c-offset-len = <0>; reg = <0x21>; lines-initial-states = <0x1408>; gpio-controller; #gpio-cells = <2>; - interrupt-controller; #interrupt-cells = <2>; }; + + tlv320aic3106: tlv320aic3106@19 { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x19>; + adc-settle-ms = <40>; + ai3x-micbias-vg = <1>; /* 2.0V */ + status = "okay"; + + /* Regulators */ + AVDD-supply = <&evm_3v3_sw>; + IOVDD-supply = <&evm_3v3_sw>; + DRVDD-supply = <&evm_3v3_sw>; + DVDD-supply = <&aic_dvdd>; + }; }; &i2c5 { @@ -252,7 +253,7 @@ clock-frequency = <400000>; pcf_hdmi: pcf8575@26 { - compatible = "nxp,pcf8575"; + compatible = "ti,pcf8575", "nxp,pcf8575"; u-boot,i2c-offset-len = <0>; reg = <0x26>; gpio-controller; @@ -286,12 +287,7 @@ }; &gpmc { - /* - * For the existing IOdelay configuration via U-Boot we don't - * support NAND on dra72-evm. Keep it disabled. Enabling it - * requires a different configuration by U-Boot. - */ - status = "disabled"; + status = "okay"; ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */ nand@0,0 { /* To use NAND, DIP switch SW5 must be set like so: @@ -299,11 +295,11 @@ * SW5.9 (GPMC_WPN) = OFF (HIGH) */ compatible = "ti,omap2-nand"; - reg = <0 0 4>; /* device IO registers */ + reg = <0 0 4>; /* device IO registers */ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ - <1 IRQ_TYPE_NONE>; /* termcount */ - rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */ /* device IO registers */ + <1 IRQ_TYPE_NONE>; /* termcount */ + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <16>; @@ -326,7 +322,6 @@ gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-data-mux-bus-ns = <0>; /* MTD partition table */ /* All SPL-* partitions are sized to minimal length @@ -377,14 +372,6 @@ }; }; -&usb2_phy1 { - phy-supply = <&ldo4_reg>; -}; - -&usb2_phy2 { - phy-supply = <&ldo4_reg>; -}; - &omap_dwc3_1 { extcon = <&extcon_usb1>; }; @@ -394,7 +381,7 @@ }; &usb1 { - dr_mode = "otg"; + dr_mode = "peripheral"; }; &usb2 { @@ -405,7 +392,7 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins_default>; - vmmc_aux-supply = <&ldo1_reg>; + vmmc-supply = <&evm_3v3_sd>; bus-width = <4>; /* * SDCD signal is not being used here - using the fact that GPIO mode @@ -421,7 +408,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins_default>; - vmmc-supply = <&evm_3v3>; + vmmc-supply = <&evm_3v3_sw>; bus-width = <8>; ti,non-removable; max-frequency = <192000000>; @@ -433,6 +420,10 @@ &dcan1 { status = "ok"; + pinctrl-names = "default", "sleep", "active"; + pinctrl-0 = <&dcan1_pins_sleep>; + pinctrl-1 = <&dcan1_pins_sleep>; + pinctrl-2 = <&dcan1_pins_default>; }; &qspi { @@ -498,8 +489,6 @@ &dss { status = "ok"; - - vdda_video-supply = <&ldo5_reg>; }; &hdmi { @@ -511,3 +500,55 @@ }; }; }; + +&atl { + assigned-clocks = <&abe_dpll_sys_clk_mux>, + <&atl_gfclk_mux>, + <&dpll_abe_ck>, + <&dpll_abe_m2x2_ck>, + <&atl_clkin2_ck>; + assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>; + assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>; + + status = "okay"; + + atl2 { + bws = ; + aws = ; + }; +}; + +&mcasp3 { + #sound-dai-cells = <0>; + + assigned-clocks = <&mcasp3_ahclkx_mux>; + assigned-clock-parents = <&atl_clkin2_ck>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializer */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 2 0 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; + }; +}; + +&mailbox6 { + status = "okay"; + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; +}; diff --git a/arch/arm/dts/dra72-evm-revc.dts b/arch/arm/dts/dra72-evm-revc.dts index 0f8a7ef3c5..5a1bb34f6b 100644 --- a/arch/arm/dts/dra72-evm-revc.dts +++ b/arch/arm/dts/dra72-evm-revc.dts @@ -11,25 +11,35 @@ / { model = "TI DRA722 Rev C EVM"; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */ }; }; -&tps65917_regulators { - ldo2_reg: ldo2 { - /* LDO2_OUT --> VDDA_1V8_PHY2 */ - regulator-name = "ldo2"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; +&i2c1 { + tps65917: tps65917@58 { + reg = <0x58>; + + interrupts = ; /* IRQ_SYS_1N */ }; }; +#include "dra72-evm-tps65917.dtsi" + +&ldo2_reg { + /* LDO2_OUT --> VDDA_1V8_PHY2 */ + regulator-always-on; + regulator-boot-on; +}; + &hdmi { - vdda_video-supply = <&ldo2_reg>; + vdda-supply = <&ldo2_reg>; +}; + +&pcf_gpio_21 { + interrupt-parent = <&gpio3>; + interrupts = <30 IRQ_TYPE_EDGE_FALLING>; }; &mac { diff --git a/arch/arm/dts/dra72-evm-tps65917.dtsi b/arch/arm/dts/dra72-evm-tps65917.dtsi new file mode 100644 index 0000000000..ee6dac44ed --- /dev/null +++ b/arch/arm/dts/dra72-evm-tps65917.dtsi @@ -0,0 +1,134 @@ +/* + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Integrated Power Management Chip + * http://www.ti.com/lit/ds/symlink/tps65917-q1.pdf + */ + +&tps65917 { + compatible = "ti,tps65917"; + + interrupt-controller; + #interrupt-cells = <2>; + + ti,system-power-controller; + + tps65917_pmic { + compatible = "ti,tps65917-pmic"; + + smps1-in-supply = <&vsys_3v3>; + smps2-in-supply = <&vsys_3v3>; + smps3-in-supply = <&vsys_3v3>; + smps4-in-supply = <&vsys_3v3>; + smps5-in-supply = <&vsys_3v3>; + ldo1-in-supply = <&vsys_3v3>; + ldo2-in-supply = <&vsys_3v3>; + ldo3-in-supply = <&vsys_3v3>; + ldo4-in-supply = <&evm_5v0>; + ldo5-in-supply = <&vsys_3v3>; + + tps65917_regulators: regulators { + smps1_reg: smps1 { + /* VDD_MPU */ + regulator-name = "smps1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps2_reg: smps2 { + /* VDD_CORE */ + regulator-name = "smps2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + smps3_reg: smps3 { + /* VDD_GPU IVA DSPEVE */ + regulator-name = "smps3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-boot-on; + regulator-always-on; + }; + + smps4_reg: smps4 { + /* VDDS1V8 */ + regulator-name = "smps4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + smps5_reg: smps5 { + /* VDD_DDR */ + regulator-name = "smps5"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + /* LDO1_OUT --> SDIO */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-allow-bypass; + }; + + ldo2_reg: ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-bypass; + }; + + ldo3_reg: ldo3 { + /* VDDA_1V8_PHY */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + /* VDDA_1V8_PLL */ + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldo4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + }; + }; + + tps65917_power_button { + compatible = "ti,palmas-pwrbutton"; + interrupt-parent = <&tps65917>; + interrupts = <1 IRQ_TYPE_NONE>; + wakeup-source; + ti,palmas-long-press-seconds = <6>; + }; +}; diff --git a/arch/arm/dts/dra72-evm.dts b/arch/arm/dts/dra72-evm.dts index f81f9189f4..cd9c4ff126 100644 --- a/arch/arm/dts/dra72-evm.dts +++ b/arch/arm/dts/dra72-evm.dts @@ -1,38 +1,45 @@ /* - * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include - +#include "dra72-evm-common.dtsi" / { model = "TI DRA722"; - compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7"; - memory { + memory@0 { device_type = "memory"; - reg = <0x80000000 0x40000000>; /* 1024 MB */ + reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */ }; }; +&i2c1 { + tps65917: tps65917@58 { + reg = <0x58>; -&cpsw_emac0 { - phy_id = <&davinci_mdio>, <3>; - phy-mode = "rgmii"; + interrupts = ; /* IRQ_SYS_1N */ + }; }; -&dss { - status = "ok"; - - vdda_video-supply = <&ldo5_reg>; -}; +#include "dra72-evm-tps65917.dtsi" &hdmi { vdda-supply = <&ldo3_reg>; }; +&pcf_gpio_21 { + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; +}; + &mac { - mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>; + slaves = <1>; + mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <3>; + phy-mode = "rgmii"; }; diff --git a/arch/arm/dts/dra7xx-clocks.dtsi b/arch/arm/dts/dra7xx-clocks.dtsi index 357bedeebf..3330738e4c 100644 --- a/arch/arm/dts/dra7xx-clocks.dtsi +++ b/arch/arm/dts/dra7xx-clocks.dtsi @@ -98,12 +98,20 @@ clock-frequency = <32768>; }; - sys_32k_ck: sys_32k_ck { + sys_clk32_crystal_ck: sys_clk32_crystal_ck { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; }; + sys_clk32_pseudo_ck: sys_clk32_pseudo_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin1>; + clock-mult = <1>; + clock-div = <610>; + }; + virt_12000000_ck: virt_12000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; @@ -188,7 +196,7 @@ clock-frequency = <0>; }; - dpll_abe_ck: dpll_abe_ck { + dpll_abe_ck: dpll_abe_ck@1e0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-m4xen-clock"; clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>; @@ -201,7 +209,7 @@ clocks = <&dpll_abe_ck>; }; - dpll_abe_m2x2_ck: dpll_abe_m2x2_ck { + dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_abe_x2_ck>; @@ -212,7 +220,7 @@ ti,invert-autoidle-bit; }; - abe_clk: abe_clk { + abe_clk: abe_clk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_abe_m2x2_ck>; @@ -221,7 +229,7 @@ ti,index-power-of-two; }; - dpll_abe_m2_ck: dpll_abe_m2_ck { + dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_abe_ck>; @@ -232,7 +240,7 @@ ti,invert-autoidle-bit; }; - dpll_abe_m3x2_ck: dpll_abe_m3x2_ck { + dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_abe_x2_ck>; @@ -243,7 +251,7 @@ ti,invert-autoidle-bit; }; - dpll_core_byp_mux: dpll_core_byp_mux { + dpll_core_byp_mux: dpll_core_byp_mux@12c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; @@ -251,7 +259,7 @@ reg = <0x012c>; }; - dpll_core_ck: dpll_core_ck { + dpll_core_ck: dpll_core_ck@120 { #clock-cells = <0>; compatible = "ti,omap4-dpll-core-clock"; clocks = <&sys_clkin1>, <&dpll_core_byp_mux>; @@ -264,7 +272,7 @@ clocks = <&dpll_core_ck>; }; - dpll_core_h12x2_ck: dpll_core_h12x2_ck { + dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -283,14 +291,14 @@ clock-div = <1>; }; - dpll_mpu_ck: dpll_mpu_ck { + dpll_mpu_ck: dpll_mpu_ck@160 { #clock-cells = <0>; compatible = "ti,omap5-mpu-dpll-clock"; clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>; reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>; }; - dpll_mpu_m2_ck: dpll_mpu_m2_ck { + dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_mpu_ck>; @@ -317,7 +325,7 @@ clock-div = <1>; }; - dpll_dsp_byp_mux: dpll_dsp_byp_mux { + dpll_dsp_byp_mux: dpll_dsp_byp_mux@240 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>; @@ -325,14 +333,14 @@ reg = <0x0240>; }; - dpll_dsp_ck: dpll_dsp_ck { + dpll_dsp_ck: dpll_dsp_ck@234 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>; reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>; }; - dpll_dsp_m2_ck: dpll_dsp_m2_ck { + dpll_dsp_m2_ck: dpll_dsp_m2_ck@244 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_dsp_ck>; @@ -351,7 +359,7 @@ clock-div = <1>; }; - dpll_iva_byp_mux: dpll_iva_byp_mux { + dpll_iva_byp_mux: dpll_iva_byp_mux@1ac { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>; @@ -359,14 +367,14 @@ reg = <0x01ac>; }; - dpll_iva_ck: dpll_iva_ck { + dpll_iva_ck: dpll_iva_ck@1a0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; }; - dpll_iva_m2_ck: dpll_iva_m2_ck { + dpll_iva_m2_ck: dpll_iva_m2_ck@1b0 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_iva_ck>; @@ -385,7 +393,7 @@ clock-div = <1>; }; - dpll_gpu_byp_mux: dpll_gpu_byp_mux { + dpll_gpu_byp_mux: dpll_gpu_byp_mux@2e4 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; @@ -393,14 +401,14 @@ reg = <0x02e4>; }; - dpll_gpu_ck: dpll_gpu_ck { + dpll_gpu_ck: dpll_gpu_ck@2d8 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>; reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>; }; - dpll_gpu_m2_ck: dpll_gpu_m2_ck { + dpll_gpu_m2_ck: dpll_gpu_m2_ck@2e8 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_gpu_ck>; @@ -411,7 +419,7 @@ ti,invert-autoidle-bit; }; - dpll_core_m2_ck: dpll_core_m2_ck { + dpll_core_m2_ck: dpll_core_m2_ck@130 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_ck>; @@ -430,7 +438,7 @@ clock-div = <1>; }; - dpll_ddr_byp_mux: dpll_ddr_byp_mux { + dpll_ddr_byp_mux: dpll_ddr_byp_mux@21c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; @@ -438,14 +446,14 @@ reg = <0x021c>; }; - dpll_ddr_ck: dpll_ddr_ck { + dpll_ddr_ck: dpll_ddr_ck@210 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>; reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>; }; - dpll_ddr_m2_ck: dpll_ddr_m2_ck { + dpll_ddr_m2_ck: dpll_ddr_m2_ck@220 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_ddr_ck>; @@ -456,7 +464,7 @@ ti,invert-autoidle-bit; }; - dpll_gmac_byp_mux: dpll_gmac_byp_mux { + dpll_gmac_byp_mux: dpll_gmac_byp_mux@2b4 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; @@ -464,14 +472,14 @@ reg = <0x02b4>; }; - dpll_gmac_ck: dpll_gmac_ck { + dpll_gmac_ck: dpll_gmac_ck@2a8 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>; reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>; }; - dpll_gmac_m2_ck: dpll_gmac_m2_ck { + dpll_gmac_m2_ck: dpll_gmac_m2_ck@2b8 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_gmac_ck>; @@ -530,7 +538,7 @@ clock-div = <1>; }; - dpll_eve_byp_mux: dpll_eve_byp_mux { + dpll_eve_byp_mux: dpll_eve_byp_mux@290 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>; @@ -538,14 +546,14 @@ reg = <0x0290>; }; - dpll_eve_ck: dpll_eve_ck { + dpll_eve_ck: dpll_eve_ck@284 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>; reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>; }; - dpll_eve_m2_ck: dpll_eve_m2_ck { + dpll_eve_m2_ck: dpll_eve_m2_ck@294 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_eve_ck>; @@ -564,7 +572,7 @@ clock-div = <1>; }; - dpll_core_h13x2_ck: dpll_core_h13x2_ck { + dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -575,7 +583,7 @@ ti,invert-autoidle-bit; }; - dpll_core_h14x2_ck: dpll_core_h14x2_ck { + dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -586,7 +594,7 @@ ti,invert-autoidle-bit; }; - dpll_core_h22x2_ck: dpll_core_h22x2_ck { + dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -597,7 +605,7 @@ ti,invert-autoidle-bit; }; - dpll_core_h23x2_ck: dpll_core_h23x2_ck { + dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -608,7 +616,7 @@ ti,invert-autoidle-bit; }; - dpll_core_h24x2_ck: dpll_core_h24x2_ck { + dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -625,7 +633,7 @@ clocks = <&dpll_ddr_ck>; }; - dpll_ddr_h11x2_ck: dpll_ddr_h11x2_ck { + dpll_ddr_h11x2_ck: dpll_ddr_h11x2_ck@228 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_ddr_x2_ck>; @@ -642,7 +650,7 @@ clocks = <&dpll_dsp_ck>; }; - dpll_dsp_m3x2_ck: dpll_dsp_m3x2_ck { + dpll_dsp_m3x2_ck: dpll_dsp_m3x2_ck@248 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_dsp_x2_ck>; @@ -659,7 +667,7 @@ clocks = <&dpll_gmac_ck>; }; - dpll_gmac_h11x2_ck: dpll_gmac_h11x2_ck { + dpll_gmac_h11x2_ck: dpll_gmac_h11x2_ck@2c0 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_gmac_x2_ck>; @@ -670,7 +678,7 @@ ti,invert-autoidle-bit; }; - dpll_gmac_h12x2_ck: dpll_gmac_h12x2_ck { + dpll_gmac_h12x2_ck: dpll_gmac_h12x2_ck@2c4 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_gmac_x2_ck>; @@ -681,7 +689,7 @@ ti,invert-autoidle-bit; }; - dpll_gmac_h13x2_ck: dpll_gmac_h13x2_ck { + dpll_gmac_h13x2_ck: dpll_gmac_h13x2_ck@2c8 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_gmac_x2_ck>; @@ -692,7 +700,7 @@ ti,invert-autoidle-bit; }; - dpll_gmac_m3x2_ck: dpll_gmac_m3x2_ck { + dpll_gmac_m3x2_ck: dpll_gmac_m3x2_ck@2bc { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_gmac_x2_ck>; @@ -727,7 +735,7 @@ clock-div = <1>; }; - l3_iclk_div: l3_iclk_div { + l3_iclk_div: l3_iclk_div@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; ti,max-div = <2>; @@ -777,7 +785,7 @@ clock-div = <1>; }; - ipu1_gfclk_mux: ipu1_gfclk_mux { + ipu1_gfclk_mux: ipu1_gfclk_mux@520 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&dpll_abe_m2x2_ck>, <&dpll_core_h22x2_ck>; @@ -785,7 +793,7 @@ reg = <0x0520>; }; - mcasp1_ahclkr_mux: mcasp1_ahclkr_mux { + mcasp1_ahclkr_mux: mcasp1_ahclkr_mux@550 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; @@ -793,7 +801,7 @@ reg = <0x0550>; }; - mcasp1_ahclkx_mux: mcasp1_ahclkx_mux { + mcasp1_ahclkx_mux: mcasp1_ahclkx_mux@550 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; @@ -801,7 +809,7 @@ reg = <0x0550>; }; - mcasp1_aux_gfclk_mux: mcasp1_aux_gfclk_mux { + mcasp1_aux_gfclk_mux: mcasp1_aux_gfclk_mux@550 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; @@ -809,7 +817,7 @@ reg = <0x0550>; }; - timer5_gfclk_mux: timer5_gfclk_mux { + timer5_gfclk_mux: timer5_gfclk_mux@558 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>; @@ -817,7 +825,7 @@ reg = <0x0558>; }; - timer6_gfclk_mux: timer6_gfclk_mux { + timer6_gfclk_mux: timer6_gfclk_mux@560 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>; @@ -825,7 +833,7 @@ reg = <0x0560>; }; - timer7_gfclk_mux: timer7_gfclk_mux { + timer7_gfclk_mux: timer7_gfclk_mux@568 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>; @@ -833,7 +841,7 @@ reg = <0x0568>; }; - timer8_gfclk_mux: timer8_gfclk_mux { + timer8_gfclk_mux: timer8_gfclk_mux@570 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>; @@ -841,7 +849,7 @@ reg = <0x0570>; }; - uart6_gfclk_mux: uart6_gfclk_mux { + uart6_gfclk_mux: uart6_gfclk_mux@580 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; @@ -856,7 +864,7 @@ }; }; &prm_clocks { - sys_clkin1: sys_clkin1 { + sys_clkin1: sys_clkin1@110 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&virt_12000000_ck>, <&virt_20000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>; @@ -864,28 +872,28 @@ ti,index-starts-at-one; }; - abe_dpll_sys_clk_mux: abe_dpll_sys_clk_mux { + abe_dpll_sys_clk_mux: abe_dpll_sys_clk_mux@118 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&sys_clkin2>; reg = <0x0118>; }; - abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux { + abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@114 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>; reg = <0x0114>; }; - abe_dpll_clk_mux: abe_dpll_clk_mux { + abe_dpll_clk_mux: abe_dpll_clk_mux@10c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>; reg = <0x010c>; }; - abe_24m_fclk: abe_24m_fclk { + abe_24m_fclk: abe_24m_fclk@11c { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_abe_m2x2_ck>; @@ -893,7 +901,7 @@ ti,dividers = <8>, <16>; }; - aess_fclk: aess_fclk { + aess_fclk: aess_fclk@178 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&abe_clk>; @@ -901,7 +909,7 @@ ti,max-div = <2>; }; - abe_giclk_div: abe_giclk_div { + abe_giclk_div: abe_giclk_div@174 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&aess_fclk>; @@ -909,7 +917,7 @@ ti,max-div = <2>; }; - abe_lp_clk_div: abe_lp_clk_div { + abe_lp_clk_div: abe_lp_clk_div@1d8 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_abe_m2x2_ck>; @@ -917,7 +925,7 @@ ti,dividers = <16>, <32>; }; - abe_sys_clk_div: abe_sys_clk_div { + abe_sys_clk_div: abe_sys_clk_div@120 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&sys_clkin1>; @@ -925,14 +933,14 @@ ti,max-div = <2>; }; - adc_gfclk_mux: adc_gfclk_mux { + adc_gfclk_mux: adc_gfclk_mux@1dc { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&sys_clkin2>, <&sys_32k_ck>; reg = <0x01dc>; }; - sys_clk1_dclk_div: sys_clk1_dclk_div { + sys_clk1_dclk_div: sys_clk1_dclk_div@1c8 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&sys_clkin1>; @@ -941,7 +949,7 @@ ti,index-power-of-two; }; - sys_clk2_dclk_div: sys_clk2_dclk_div { + sys_clk2_dclk_div: sys_clk2_dclk_div@1cc { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&sys_clkin2>; @@ -950,7 +958,7 @@ ti,index-power-of-two; }; - per_abe_x1_dclk_div: per_abe_x1_dclk_div { + per_abe_x1_dclk_div: per_abe_x1_dclk_div@1bc { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_abe_m2_ck>; @@ -959,7 +967,7 @@ ti,index-power-of-two; }; - dsp_gclk_div: dsp_gclk_div { + dsp_gclk_div: dsp_gclk_div@18c { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_dsp_m2_ck>; @@ -968,7 +976,7 @@ ti,index-power-of-two; }; - gpu_dclk: gpu_dclk { + gpu_dclk: gpu_dclk@1a0 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_gpu_m2_ck>; @@ -977,7 +985,7 @@ ti,index-power-of-two; }; - emif_phy_dclk_div: emif_phy_dclk_div { + emif_phy_dclk_div: emif_phy_dclk_div@190 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_ddr_m2_ck>; @@ -986,7 +994,7 @@ ti,index-power-of-two; }; - gmac_250m_dclk_div: gmac_250m_dclk_div { + gmac_250m_dclk_div: gmac_250m_dclk_div@19c { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_gmac_m2_ck>; @@ -995,7 +1003,15 @@ ti,index-power-of-two; }; - l3init_480m_dclk_div: l3init_480m_dclk_div { + gmac_main_clk: gmac_main_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&gmac_250m_dclk_div>; + clock-mult = <1>; + clock-div = <2>; + }; + + l3init_480m_dclk_div: l3init_480m_dclk_div@1ac { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_usb_m2_ck>; @@ -1004,7 +1020,7 @@ ti,index-power-of-two; }; - usb_otg_dclk_div: usb_otg_dclk_div { + usb_otg_dclk_div: usb_otg_dclk_div@184 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&usb_otg_clkin_ck>; @@ -1013,7 +1029,7 @@ ti,index-power-of-two; }; - sata_dclk_div: sata_dclk_div { + sata_dclk_div: sata_dclk_div@1c0 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&sys_clkin1>; @@ -1022,7 +1038,7 @@ ti,index-power-of-two; }; - pcie2_dclk_div: pcie2_dclk_div { + pcie2_dclk_div: pcie2_dclk_div@1b8 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_pcie_ref_m2_ck>; @@ -1031,7 +1047,7 @@ ti,index-power-of-two; }; - pcie_dclk_div: pcie_dclk_div { + pcie_dclk_div: pcie_dclk_div@1b4 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&apll_pcie_m2_ck>; @@ -1040,7 +1056,7 @@ ti,index-power-of-two; }; - emu_dclk_div: emu_dclk_div { + emu_dclk_div: emu_dclk_div@194 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&sys_clkin1>; @@ -1049,7 +1065,7 @@ ti,index-power-of-two; }; - secure_32k_dclk_div: secure_32k_dclk_div { + secure_32k_dclk_div: secure_32k_dclk_div@1c4 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&secure_32k_clk_src_ck>; @@ -1058,21 +1074,21 @@ ti,index-power-of-two; }; - clkoutmux0_clk_mux: clkoutmux0_clk_mux { + clkoutmux0_clk_mux: clkoutmux0_clk_mux@158 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>; reg = <0x0158>; }; - clkoutmux1_clk_mux: clkoutmux1_clk_mux { + clkoutmux1_clk_mux: clkoutmux1_clk_mux@15c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>; reg = <0x015c>; }; - clkoutmux2_clk_mux: clkoutmux2_clk_mux { + clkoutmux2_clk_mux: clkoutmux2_clk_mux@160 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>; @@ -1087,21 +1103,21 @@ clock-div = <2>; }; - eve_clk: eve_clk { + eve_clk: eve_clk@180 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&dpll_eve_m2_ck>, <&dpll_dsp_m3x2_ck>; reg = <0x0180>; }; - hdmi_dpll_clk_mux: hdmi_dpll_clk_mux { + hdmi_dpll_clk_mux: hdmi_dpll_clk_mux@164 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&sys_clkin2>; reg = <0x0164>; }; - mlb_clk: mlb_clk { + mlb_clk: mlb_clk@134 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&mlb_clkin_ck>; @@ -1110,7 +1126,7 @@ ti,index-power-of-two; }; - mlbp_clk: mlbp_clk { + mlbp_clk: mlbp_clk@130 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&mlbp_clkin_ck>; @@ -1119,7 +1135,7 @@ ti,index-power-of-two; }; - per_abe_x1_gfclk2_div: per_abe_x1_gfclk2_div { + per_abe_x1_gfclk2_div: per_abe_x1_gfclk2_div@138 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_abe_m2_ck>; @@ -1128,7 +1144,7 @@ ti,index-power-of-two; }; - timer_sys_clk_div: timer_sys_clk_div { + timer_sys_clk_div: timer_sys_clk_div@144 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&sys_clkin1>; @@ -1136,28 +1152,28 @@ ti,max-div = <2>; }; - video1_dpll_clk_mux: video1_dpll_clk_mux { + video1_dpll_clk_mux: video1_dpll_clk_mux@168 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&sys_clkin2>; reg = <0x0168>; }; - video2_dpll_clk_mux: video2_dpll_clk_mux { + video2_dpll_clk_mux: video2_dpll_clk_mux@16c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&sys_clkin2>; reg = <0x016c>; }; - wkupaon_iclk_mux: wkupaon_iclk_mux { + wkupaon_iclk_mux: wkupaon_iclk_mux@108 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&abe_lp_clk_div>; reg = <0x0108>; }; - gpio1_dbclk: gpio1_dbclk { + gpio1_dbclk: gpio1_dbclk@1838 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1165,7 +1181,7 @@ reg = <0x1838>; }; - dcan1_sys_clk_mux: dcan1_sys_clk_mux { + dcan1_sys_clk_mux: dcan1_sys_clk_mux@1888 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&sys_clkin2>; @@ -1173,7 +1189,7 @@ reg = <0x1888>; }; - timer1_gfclk_mux: timer1_gfclk_mux { + timer1_gfclk_mux: timer1_gfclk_mux@1840 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; @@ -1181,7 +1197,7 @@ reg = <0x1840>; }; - uart10_gfclk_mux: uart10_gfclk_mux { + uart10_gfclk_mux: uart10_gfclk_mux@1880 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; @@ -1190,14 +1206,14 @@ }; }; &cm_core_clocks { - dpll_pcie_ref_ck: dpll_pcie_ref_ck { + dpll_pcie_ref_ck: dpll_pcie_ref_ck@200 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin1>, <&sys_clkin1>; reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>; }; - dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck { + dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck@210 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_pcie_ref_ck>; @@ -1216,7 +1232,7 @@ ti,bit-shift = <7>; }; - apll_pcie_ck: apll_pcie_ck { + apll_pcie_ck: apll_pcie_ck@21c { #clock-cells = <0>; compatible = "ti,dra7-apll-clock"; clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>; @@ -1305,7 +1321,7 @@ clock-div = <1>; }; - dpll_per_byp_mux: dpll_per_byp_mux { + dpll_per_byp_mux: dpll_per_byp_mux@14c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>; @@ -1313,14 +1329,14 @@ reg = <0x014c>; }; - dpll_per_ck: dpll_per_ck { + dpll_per_ck: dpll_per_ck@140 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin1>, <&dpll_per_byp_mux>; reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; }; - dpll_per_m2_ck: dpll_per_m2_ck { + dpll_per_m2_ck: dpll_per_m2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_ck>; @@ -1339,7 +1355,7 @@ clock-div = <1>; }; - dpll_usb_byp_mux: dpll_usb_byp_mux { + dpll_usb_byp_mux: dpll_usb_byp_mux@18c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>; @@ -1347,14 +1363,14 @@ reg = <0x018c>; }; - dpll_usb_ck: dpll_usb_ck { + dpll_usb_ck: dpll_usb_ck@180 { #clock-cells = <0>; compatible = "ti,omap4-dpll-j-type-clock"; clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>; reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; }; - dpll_usb_m2_ck: dpll_usb_m2_ck { + dpll_usb_m2_ck: dpll_usb_m2_ck@190 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_usb_ck>; @@ -1365,7 +1381,7 @@ ti,invert-autoidle-bit; }; - dpll_pcie_ref_m2_ck: dpll_pcie_ref_m2_ck { + dpll_pcie_ref_m2_ck: dpll_pcie_ref_m2_ck@210 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_pcie_ref_ck>; @@ -1382,7 +1398,7 @@ clocks = <&dpll_per_ck>; }; - dpll_per_h11x2_ck: dpll_per_h11x2_ck { + dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; @@ -1393,7 +1409,7 @@ ti,invert-autoidle-bit; }; - dpll_per_h12x2_ck: dpll_per_h12x2_ck { + dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; @@ -1404,7 +1420,7 @@ ti,invert-autoidle-bit; }; - dpll_per_h13x2_ck: dpll_per_h13x2_ck { + dpll_per_h13x2_ck: dpll_per_h13x2_ck@160 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; @@ -1415,7 +1431,7 @@ ti,invert-autoidle-bit; }; - dpll_per_h14x2_ck: dpll_per_h14x2_ck { + dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; @@ -1426,7 +1442,7 @@ ti,invert-autoidle-bit; }; - dpll_per_m2x2_ck: dpll_per_m2x2_ck { + dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; @@ -1485,7 +1501,7 @@ clock-div = <2>; }; - l3init_60m_fclk: l3init_60m_fclk { + l3init_60m_fclk: l3init_60m_fclk@104 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_usb_m2_ck>; @@ -1493,7 +1509,7 @@ ti,dividers = <1>, <8>; }; - clkout2_clk: clkout2_clk { + clkout2_clk: clkout2_clk@6b0 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&clkoutmux2_clk_mux>; @@ -1501,7 +1517,7 @@ reg = <0x06b0>; }; - l3init_960m_gfclk: l3init_960m_gfclk { + l3init_960m_gfclk: l3init_960m_gfclk@6c0 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll_usb_clkdcoldo>; @@ -1509,7 +1525,7 @@ reg = <0x06c0>; }; - dss_32khz_clk: dss_32khz_clk { + dss_32khz_clk: dss_32khz_clk@1120 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1517,7 +1533,7 @@ reg = <0x1120>; }; - dss_48mhz_clk: dss_48mhz_clk { + dss_48mhz_clk: dss_48mhz_clk@1120 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&func_48m_fclk>; @@ -1525,7 +1541,7 @@ reg = <0x1120>; }; - dss_dss_clk: dss_dss_clk { + dss_dss_clk: dss_dss_clk@1120 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll_per_h12x2_ck>; @@ -1534,7 +1550,7 @@ ti,set-rate-parent; }; - dss_hdmi_clk: dss_hdmi_clk { + dss_hdmi_clk: dss_hdmi_clk@1120 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&hdmi_dpll_clk_mux>; @@ -1542,7 +1558,7 @@ reg = <0x1120>; }; - dss_video1_clk: dss_video1_clk { + dss_video1_clk: dss_video1_clk@1120 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&video1_dpll_clk_mux>; @@ -1550,7 +1566,7 @@ reg = <0x1120>; }; - dss_video2_clk: dss_video2_clk { + dss_video2_clk: dss_video2_clk@1120 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&video2_dpll_clk_mux>; @@ -1558,7 +1574,7 @@ reg = <0x1120>; }; - gpio2_dbclk: gpio2_dbclk { + gpio2_dbclk: gpio2_dbclk@1760 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1566,7 +1582,7 @@ reg = <0x1760>; }; - gpio3_dbclk: gpio3_dbclk { + gpio3_dbclk: gpio3_dbclk@1768 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1574,7 +1590,7 @@ reg = <0x1768>; }; - gpio4_dbclk: gpio4_dbclk { + gpio4_dbclk: gpio4_dbclk@1770 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1582,7 +1598,7 @@ reg = <0x1770>; }; - gpio5_dbclk: gpio5_dbclk { + gpio5_dbclk: gpio5_dbclk@1778 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1590,7 +1606,7 @@ reg = <0x1778>; }; - gpio6_dbclk: gpio6_dbclk { + gpio6_dbclk: gpio6_dbclk@1780 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1598,7 +1614,7 @@ reg = <0x1780>; }; - gpio7_dbclk: gpio7_dbclk { + gpio7_dbclk: gpio7_dbclk@1810 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1606,7 +1622,7 @@ reg = <0x1810>; }; - gpio8_dbclk: gpio8_dbclk { + gpio8_dbclk: gpio8_dbclk@1818 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1614,7 +1630,7 @@ reg = <0x1818>; }; - mmc1_clk32k: mmc1_clk32k { + mmc1_clk32k: mmc1_clk32k@1328 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1622,7 +1638,7 @@ reg = <0x1328>; }; - mmc2_clk32k: mmc2_clk32k { + mmc2_clk32k: mmc2_clk32k@1330 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1630,7 +1646,7 @@ reg = <0x1330>; }; - mmc3_clk32k: mmc3_clk32k { + mmc3_clk32k: mmc3_clk32k@1820 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1638,7 +1654,7 @@ reg = <0x1820>; }; - mmc4_clk32k: mmc4_clk32k { + mmc4_clk32k: mmc4_clk32k@1828 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1646,7 +1662,7 @@ reg = <0x1828>; }; - sata_ref_clk: sata_ref_clk { + sata_ref_clk: sata_ref_clk@1388 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_clkin1>; @@ -1654,7 +1670,7 @@ reg = <0x1388>; }; - usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m { + usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m@13f0 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l3init_960m_gfclk>; @@ -1662,7 +1678,7 @@ reg = <0x13f0>; }; - usb_otg_ss2_refclk960m: usb_otg_ss2_refclk960m { + usb_otg_ss2_refclk960m: usb_otg_ss2_refclk960m@1340 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l3init_960m_gfclk>; @@ -1670,7 +1686,7 @@ reg = <0x1340>; }; - usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k { + usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@640 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1678,7 +1694,7 @@ reg = <0x0640>; }; - usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k { + usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k@688 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1686,7 +1702,7 @@ reg = <0x0688>; }; - usb_phy3_always_on_clk32k: usb_phy3_always_on_clk32k { + usb_phy3_always_on_clk32k: usb_phy3_always_on_clk32k@698 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1694,7 +1710,7 @@ reg = <0x0698>; }; - atl_dpll_clk_mux: atl_dpll_clk_mux { + atl_dpll_clk_mux: atl_dpll_clk_mux@c00 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_32k_ck>, <&video1_clkin_ck>, <&video2_clkin_ck>, <&hdmi_clkin_ck>; @@ -1702,7 +1718,7 @@ reg = <0x0c00>; }; - atl_gfclk_mux: atl_gfclk_mux { + atl_gfclk_mux: atl_gfclk_mux@c00 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&l3_iclk_div>, <&dpll_abe_m2_ck>, <&atl_dpll_clk_mux>; @@ -1710,16 +1726,15 @@ reg = <0x0c00>; }; - gmac_gmii_ref_clk_div: gmac_gmii_ref_clk_div { + rmii_50mhz_clk_mux: rmii_50mhz_clk_mux@13d0 { #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll_gmac_m2_ck>; + compatible = "ti,mux-clock"; + clocks = <&dpll_gmac_h11x2_ck>, <&rmii_clk_ck>; ti,bit-shift = <24>; reg = <0x13d0>; - ti,dividers = <2>; }; - gmac_rft_clk_mux: gmac_rft_clk_mux { + gmac_rft_clk_mux: gmac_rft_clk_mux@13d0 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&video1_clkin_ck>, <&video2_clkin_ck>, <&dpll_abe_m2_ck>, <&hdmi_clkin_ck>, <&l3_iclk_div>; @@ -1727,7 +1742,7 @@ reg = <0x13d0>; }; - gpu_core_gclk_mux: gpu_core_gclk_mux { + gpu_core_gclk_mux: gpu_core_gclk_mux@1220 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>; @@ -1735,7 +1750,7 @@ reg = <0x1220>; }; - gpu_hyd_gclk_mux: gpu_hyd_gclk_mux { + gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1220 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>; @@ -1743,7 +1758,7 @@ reg = <0x1220>; }; - l3instr_ts_gclk_div: l3instr_ts_gclk_div { + l3instr_ts_gclk_div: l3instr_ts_gclk_div@e50 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&wkupaon_iclk_mux>; @@ -1752,7 +1767,7 @@ ti,dividers = <8>, <16>, <32>; }; - mcasp2_ahclkr_mux: mcasp2_ahclkr_mux { + mcasp2_ahclkr_mux: mcasp2_ahclkr_mux@1860 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; @@ -1760,7 +1775,7 @@ reg = <0x1860>; }; - mcasp2_ahclkx_mux: mcasp2_ahclkx_mux { + mcasp2_ahclkx_mux: mcasp2_ahclkx_mux@1860 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; @@ -1768,7 +1783,7 @@ reg = <0x1860>; }; - mcasp2_aux_gfclk_mux: mcasp2_aux_gfclk_mux { + mcasp2_aux_gfclk_mux: mcasp2_aux_gfclk_mux@1860 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; @@ -1776,7 +1791,7 @@ reg = <0x1860>; }; - mcasp3_ahclkx_mux: mcasp3_ahclkx_mux { + mcasp3_ahclkx_mux: mcasp3_ahclkx_mux@1868 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; @@ -1784,7 +1799,7 @@ reg = <0x1868>; }; - mcasp3_aux_gfclk_mux: mcasp3_aux_gfclk_mux { + mcasp3_aux_gfclk_mux: mcasp3_aux_gfclk_mux@1868 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; @@ -1792,7 +1807,7 @@ reg = <0x1868>; }; - mcasp4_ahclkx_mux: mcasp4_ahclkx_mux { + mcasp4_ahclkx_mux: mcasp4_ahclkx_mux@1898 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; @@ -1800,7 +1815,7 @@ reg = <0x1898>; }; - mcasp4_aux_gfclk_mux: mcasp4_aux_gfclk_mux { + mcasp4_aux_gfclk_mux: mcasp4_aux_gfclk_mux@1898 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; @@ -1808,7 +1823,7 @@ reg = <0x1898>; }; - mcasp5_ahclkx_mux: mcasp5_ahclkx_mux { + mcasp5_ahclkx_mux: mcasp5_ahclkx_mux@1878 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; @@ -1816,7 +1831,7 @@ reg = <0x1878>; }; - mcasp5_aux_gfclk_mux: mcasp5_aux_gfclk_mux { + mcasp5_aux_gfclk_mux: mcasp5_aux_gfclk_mux@1878 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; @@ -1824,7 +1839,7 @@ reg = <0x1878>; }; - mcasp6_ahclkx_mux: mcasp6_ahclkx_mux { + mcasp6_ahclkx_mux: mcasp6_ahclkx_mux@1904 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; @@ -1832,7 +1847,7 @@ reg = <0x1904>; }; - mcasp6_aux_gfclk_mux: mcasp6_aux_gfclk_mux { + mcasp6_aux_gfclk_mux: mcasp6_aux_gfclk_mux@1904 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; @@ -1840,7 +1855,7 @@ reg = <0x1904>; }; - mcasp7_ahclkx_mux: mcasp7_ahclkx_mux { + mcasp7_ahclkx_mux: mcasp7_ahclkx_mux@1908 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; @@ -1848,7 +1863,7 @@ reg = <0x1908>; }; - mcasp7_aux_gfclk_mux: mcasp7_aux_gfclk_mux { + mcasp7_aux_gfclk_mux: mcasp7_aux_gfclk_mux@1908 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; @@ -1856,7 +1871,7 @@ reg = <0x1908>; }; - mcasp8_ahclk_mux: mcasp8_ahclk_mux { + mcasp8_ahclkx_mux: mcasp8_ahclkx_mux@1890 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; @@ -1864,7 +1879,7 @@ reg = <0x1890>; }; - mcasp8_aux_gfclk_mux: mcasp8_aux_gfclk_mux { + mcasp8_aux_gfclk_mux: mcasp8_aux_gfclk_mux@1890 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; @@ -1872,7 +1887,7 @@ reg = <0x1890>; }; - mmc1_fclk_mux: mmc1_fclk_mux { + mmc1_fclk_mux: mmc1_fclk_mux@1328 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>; @@ -1880,7 +1895,7 @@ reg = <0x1328>; }; - mmc1_fclk_div: mmc1_fclk_div { + mmc1_fclk_div: mmc1_fclk_div@1328 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&mmc1_fclk_mux>; @@ -1890,7 +1905,7 @@ ti,index-power-of-two; }; - mmc2_fclk_mux: mmc2_fclk_mux { + mmc2_fclk_mux: mmc2_fclk_mux@1330 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>; @@ -1898,7 +1913,7 @@ reg = <0x1330>; }; - mmc2_fclk_div: mmc2_fclk_div { + mmc2_fclk_div: mmc2_fclk_div@1330 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&mmc2_fclk_mux>; @@ -1908,7 +1923,7 @@ ti,index-power-of-two; }; - mmc3_gfclk_mux: mmc3_gfclk_mux { + mmc3_gfclk_mux: mmc3_gfclk_mux@1820 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; @@ -1916,7 +1931,7 @@ reg = <0x1820>; }; - mmc3_gfclk_div: mmc3_gfclk_div { + mmc3_gfclk_div: mmc3_gfclk_div@1820 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&mmc3_gfclk_mux>; @@ -1926,7 +1941,7 @@ ti,index-power-of-two; }; - mmc4_gfclk_mux: mmc4_gfclk_mux { + mmc4_gfclk_mux: mmc4_gfclk_mux@1828 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; @@ -1934,7 +1949,7 @@ reg = <0x1828>; }; - mmc4_gfclk_div: mmc4_gfclk_div { + mmc4_gfclk_div: mmc4_gfclk_div@1828 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&mmc4_gfclk_mux>; @@ -1944,7 +1959,7 @@ ti,index-power-of-two; }; - qspi_gfclk_mux: qspi_gfclk_mux { + qspi_gfclk_mux: qspi_gfclk_mux@1838 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_128m_clk>, <&dpll_per_h13x2_ck>; @@ -1952,7 +1967,7 @@ reg = <0x1838>; }; - qspi_gfclk_div: qspi_gfclk_div { + qspi_gfclk_div: qspi_gfclk_div@1838 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&qspi_gfclk_mux>; @@ -1962,7 +1977,7 @@ ti,index-power-of-two; }; - timer10_gfclk_mux: timer10_gfclk_mux { + timer10_gfclk_mux: timer10_gfclk_mux@1728 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; @@ -1970,7 +1985,7 @@ reg = <0x1728>; }; - timer11_gfclk_mux: timer11_gfclk_mux { + timer11_gfclk_mux: timer11_gfclk_mux@1730 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; @@ -1978,7 +1993,7 @@ reg = <0x1730>; }; - timer13_gfclk_mux: timer13_gfclk_mux { + timer13_gfclk_mux: timer13_gfclk_mux@17c8 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; @@ -1986,7 +2001,7 @@ reg = <0x17c8>; }; - timer14_gfclk_mux: timer14_gfclk_mux { + timer14_gfclk_mux: timer14_gfclk_mux@17d0 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; @@ -1994,7 +2009,7 @@ reg = <0x17d0>; }; - timer15_gfclk_mux: timer15_gfclk_mux { + timer15_gfclk_mux: timer15_gfclk_mux@17d8 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; @@ -2002,7 +2017,7 @@ reg = <0x17d8>; }; - timer16_gfclk_mux: timer16_gfclk_mux { + timer16_gfclk_mux: timer16_gfclk_mux@1830 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; @@ -2010,7 +2025,7 @@ reg = <0x1830>; }; - timer2_gfclk_mux: timer2_gfclk_mux { + timer2_gfclk_mux: timer2_gfclk_mux@1738 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; @@ -2018,7 +2033,7 @@ reg = <0x1738>; }; - timer3_gfclk_mux: timer3_gfclk_mux { + timer3_gfclk_mux: timer3_gfclk_mux@1740 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; @@ -2026,7 +2041,7 @@ reg = <0x1740>; }; - timer4_gfclk_mux: timer4_gfclk_mux { + timer4_gfclk_mux: timer4_gfclk_mux@1748 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; @@ -2034,7 +2049,7 @@ reg = <0x1748>; }; - timer9_gfclk_mux: timer9_gfclk_mux { + timer9_gfclk_mux: timer9_gfclk_mux@1750 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; @@ -2042,7 +2057,7 @@ reg = <0x1750>; }; - uart1_gfclk_mux: uart1_gfclk_mux { + uart1_gfclk_mux: uart1_gfclk_mux@1840 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; @@ -2050,7 +2065,7 @@ reg = <0x1840>; }; - uart2_gfclk_mux: uart2_gfclk_mux { + uart2_gfclk_mux: uart2_gfclk_mux@1848 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; @@ -2058,7 +2073,7 @@ reg = <0x1848>; }; - uart3_gfclk_mux: uart3_gfclk_mux { + uart3_gfclk_mux: uart3_gfclk_mux@1850 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; @@ -2066,7 +2081,7 @@ reg = <0x1850>; }; - uart4_gfclk_mux: uart4_gfclk_mux { + uart4_gfclk_mux: uart4_gfclk_mux@1858 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; @@ -2074,7 +2089,7 @@ reg = <0x1858>; }; - uart5_gfclk_mux: uart5_gfclk_mux { + uart5_gfclk_mux: uart5_gfclk_mux@1870 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; @@ -2082,7 +2097,7 @@ reg = <0x1870>; }; - uart7_gfclk_mux: uart7_gfclk_mux { + uart7_gfclk_mux: uart7_gfclk_mux@18d0 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; @@ -2090,7 +2105,7 @@ reg = <0x18d0>; }; - uart8_gfclk_mux: uart8_gfclk_mux { + uart8_gfclk_mux: uart8_gfclk_mux@18e0 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; @@ -2098,7 +2113,7 @@ reg = <0x18e0>; }; - uart9_gfclk_mux: uart9_gfclk_mux { + uart9_gfclk_mux: uart9_gfclk_mux@18e8 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; @@ -2106,7 +2121,7 @@ reg = <0x18e8>; }; - vip1_gclk_mux: vip1_gclk_mux { + vip1_gclk_mux: vip1_gclk_mux@1020 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>; @@ -2114,7 +2129,7 @@ reg = <0x1020>; }; - vip2_gclk_mux: vip2_gclk_mux { + vip2_gclk_mux: vip2_gclk_mux@1028 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>; @@ -2122,7 +2137,7 @@ reg = <0x1028>; }; - vip3_gclk_mux: vip3_gclk_mux { + vip3_gclk_mux: vip3_gclk_mux@1030 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>; @@ -2139,11 +2154,43 @@ }; &scm_conf_clocks { - dss_deshdcp_clk: dss_deshdcp_clk { + dss_deshdcp_clk: dss_deshdcp_clk@558 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l3_iclk_div>; ti,bit-shift = <0>; reg = <0x558>; }; + + ehrpwm0_tbclk: ehrpwm0_tbclk@558 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&l4_root_clk_div>; + ti,bit-shift = <20>; + reg = <0x0558>; + }; + + ehrpwm1_tbclk: ehrpwm1_tbclk@558 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&l4_root_clk_div>; + ti,bit-shift = <21>; + reg = <0x0558>; + }; + + ehrpwm2_tbclk: ehrpwm2_tbclk@558 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&l4_root_clk_div>; + ti,bit-shift = <22>; + reg = <0x0558>; + }; + + sys_32k_ck: sys_32k_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>; + ti,bit-shift = <8>; + reg = <0x6c4>; + }; }; diff --git a/include/dt-bindings/clk/ti-dra7-atl.h b/include/dt-bindings/clk/ti-dra7-atl.h new file mode 100644 index 0000000000..42dd4164f6 --- /dev/null +++ b/include/dt-bindings/clk/ti-dra7-atl.h @@ -0,0 +1,40 @@ +/* + * This header provides constants for DRA7 ATL (Audio Tracking Logic) + * + * The constants defined in this header are used in dts files + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * Peter Ujfalusi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DT_BINDINGS_CLK_DRA7_ATL_H +#define _DT_BINDINGS_CLK_DRA7_ATL_H + +#define DRA7_ATL_WS_MCASP1_FSR 0 +#define DRA7_ATL_WS_MCASP1_FSX 1 +#define DRA7_ATL_WS_MCASP2_FSR 2 +#define DRA7_ATL_WS_MCASP2_FSX 3 +#define DRA7_ATL_WS_MCASP3_FSX 4 +#define DRA7_ATL_WS_MCASP4_FSX 5 +#define DRA7_ATL_WS_MCASP5_FSX 6 +#define DRA7_ATL_WS_MCASP6_FSX 7 +#define DRA7_ATL_WS_MCASP7_FSX 8 +#define DRA7_ATL_WS_MCASP8_FSX 9 +#define DRA7_ATL_WS_MCASP8_AHCLKX 10 +#define DRA7_ATL_WS_XREF_CLK3 11 +#define DRA7_ATL_WS_XREF_CLK0 12 +#define DRA7_ATL_WS_XREF_CLK1 13 +#define DRA7_ATL_WS_XREF_CLK2 14 +#define DRA7_ATL_WS_OSC1_X1 15 + +#endif diff --git a/include/dt-bindings/pinctrl/dra.h b/include/dt-bindings/pinctrl/dra.h index 7448edff47..5c75e80915 100644 --- a/include/dt-bindings/pinctrl/dra.h +++ b/include/dt-bindings/pinctrl/dra.h @@ -30,6 +30,26 @@ #define MUX_MODE14 0xe #define MUX_MODE15 0xf +/* Certain pins need virtual mode, but note: they may glitch */ +#define MUX_VIRTUAL_MODE0 (MODE_SELECT | (0x0 << 4)) +#define MUX_VIRTUAL_MODE1 (MODE_SELECT | (0x1 << 4)) +#define MUX_VIRTUAL_MODE2 (MODE_SELECT | (0x2 << 4)) +#define MUX_VIRTUAL_MODE3 (MODE_SELECT | (0x3 << 4)) +#define MUX_VIRTUAL_MODE4 (MODE_SELECT | (0x4 << 4)) +#define MUX_VIRTUAL_MODE5 (MODE_SELECT | (0x5 << 4)) +#define MUX_VIRTUAL_MODE6 (MODE_SELECT | (0x6 << 4)) +#define MUX_VIRTUAL_MODE7 (MODE_SELECT | (0x7 << 4)) +#define MUX_VIRTUAL_MODE8 (MODE_SELECT | (0x8 << 4)) +#define MUX_VIRTUAL_MODE9 (MODE_SELECT | (0x9 << 4)) +#define MUX_VIRTUAL_MODE10 (MODE_SELECT | (0xa << 4)) +#define MUX_VIRTUAL_MODE11 (MODE_SELECT | (0xb << 4)) +#define MUX_VIRTUAL_MODE12 (MODE_SELECT | (0xc << 4)) +#define MUX_VIRTUAL_MODE13 (MODE_SELECT | (0xd << 4)) +#define MUX_VIRTUAL_MODE14 (MODE_SELECT | (0xe << 4)) +#define MUX_VIRTUAL_MODE15 (MODE_SELECT | (0xf << 4)) + +#define MODE_SELECT (1 << 8) + #define PULL_ENA (0 << 16) #define PULL_DIS (1 << 16) #define PULL_UP (1 << 17) @@ -47,5 +67,11 @@ #define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP) #define PIN_INPUT_PULLDOWN (PULL_ENA | INPUT_EN) +/* + * Macro to allow using the absolute physical address instead of the + * padconf registers instead of the offset from padconf base. + */ +#define DRA7XX_CORE_IOPAD(pa, val) (((pa) & 0xffff) - 0x3400) (val) + #endif -- 2.39.5