From 7c791b3f0a8e42f8012f782ef56ad6e88858e7c4 Mon Sep 17 00:00:00 2001 From: Tetsuyuki Kobayashi Date: Mon, 19 Nov 2012 21:37:38 +0000 Subject: [PATCH] serial: serial_sh: bugfix: autoboot fails if serial console is not connected On kzm9g board (rmobile SoC), autoboot fails if serial console cable is not connected. When serial cable is not connected, serial error occurs and some garbage comes in data register. sh_serial_tstc() in serial_sh.c does not check error status and misunderstand there is some input data. It is the reason that autoboot fails. This patch adds checking error status in sh_serial_tstc(). This patch is based on v2013.01-rc1 tag of u-boot master git. Signed-off-by: Tetsuyuki Kobayashi Signed-off-by: Nobuhiro Iwamatsu --- drivers/serial/serial_sh.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c index 3c931d0212..ee1f2d768a 100644 --- a/drivers/serial/serial_sh.c +++ b/drivers/serial/serial_sh.c @@ -117,6 +117,14 @@ static int serial_rx_fifo_level(void) return scif_rxfill(&sh_sci); } +static void handle_error(void) +{ + sci_in(&sh_sci, SCxSR); + sci_out(&sh_sci, SCxSR, SCxSR_ERROR_CLEAR(&sh_sci)); + sci_in(&sh_sci, SCLSR); + sci_out(&sh_sci, SCLSR, 0x00); +} + void serial_raw_putc(const char c) { while (1) { @@ -138,16 +146,14 @@ static void sh_serial_putc(const char c) static int sh_serial_tstc(void) { + if (sci_in(&sh_sci, SCxSR) & SCIF_ERRORS) { + handle_error(); + return 0; + } + return serial_rx_fifo_level() ? 1 : 0; } -void handle_error(void) -{ - sci_in(&sh_sci, SCxSR); - sci_out(&sh_sci, SCxSR, SCxSR_ERROR_CLEAR(&sh_sci)); - sci_in(&sh_sci, SCLSR); - sci_out(&sh_sci, SCLSR, 0x00); -} int serial_getc_check(void) { -- 2.39.5