From 8229d525b6e8773ccdcf5cec4a5119d329dfa3e7 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Andreas=20F=C3=A4rber?= Date: Sat, 28 Nov 2015 20:48:32 +0100 Subject: [PATCH] tcl/board: Add Infineon XMC4800 Relax EtherCAT Kit config MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Tested with "J-Link Lite-XMC4200 Rev.1 compiled Oct 14 2015 10:14:50". Derived from xmc4500-relax.cfg. Change-Id: Ia1edf5cb95088ccd34e3b90570d727bbb401cbf5 Signed-off-by: Andreas Färber Reviewed-on: http://openocd.zylin.com/3129 Tested-by: jenkins Reviewed-by: Paul Fertser --- tcl/board/xmc4800-relax.cfg | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 tcl/board/xmc4800-relax.cfg diff --git a/tcl/board/xmc4800-relax.cfg b/tcl/board/xmc4800-relax.cfg new file mode 100644 index 00000000..fa3fc8f3 --- /dev/null +++ b/tcl/board/xmc4800-relax.cfg @@ -0,0 +1,16 @@ +# +# Infineon XMC4800 Relax EtherCAT Kit +# + +# +# Segger J-Link Lite XMC4200 on-board +# +source [find interface/jlink.cfg] +transport select swd + +# There's also an unpopulated 10-pin 0.05" pinout. + +set CHIPNAME xmc4800 +source [find target/xmc4xxx.cfg] + +# N25Q032A qSPI flash -- 2.39.5