From 83c67b7ac7635260d09d9fe15a50a34440c0c4bb Mon Sep 17 00:00:00 2001 From: Grzegorz Kostka Date: Tue, 18 Apr 2017 16:12:58 +0200 Subject: [PATCH] imx_gpio: add mmap based jtag interface for IMX processors For some targets (like nrf51) sysfs driver is too slow. This patch implements memory maped driver for IMX processors. Mostly based on bcm2835gpio. Tested on imx6ul CPU. However, it should work on any NXP IMX CPU. Change-Id: Idace4c98181c6e9c64dd158bfa52631204b5c4a7 Signed-off-by: Grzegorz Kostka Reviewed-on: http://openocd.zylin.com/4106 Tested-by: jenkins Reviewed-by: Paul Fertser --- configure.ac | 12 + doc/openocd.texi | 15 + src/jtag/drivers/Makefile.am | 5 +- src/jtag/drivers/imx_gpio.c | 552 +++++++++++++++++++++++++++++++++++ src/jtag/interfaces.c | 6 + tcl/interface/imx-native.cfg | 35 +++ 6 files changed, 623 insertions(+), 2 deletions(-) create mode 100644 src/jtag/drivers/imx_gpio.c create mode 100644 tcl/interface/imx-native.cfg diff --git a/configure.ac b/configure.ac index f5d3b9e7..c680bda7 100644 --- a/configure.ac +++ b/configure.ac @@ -298,11 +298,15 @@ AS_CASE(["${host_cpu}"], AC_ARG_ENABLE([bcm2835gpio], AS_HELP_STRING([--enable-bcm2835gpio], [Enable building support for bitbanging on BCM2835 (as found in Raspberry Pi)]), [build_bcm2835gpio=$enableval], [build_bcm2835gpio=no]) + AC_ARG_ENABLE([imx_gpio], + AS_HELP_STRING([--enable-imx_gpio], [Enable building support for bitbanging on NXP IMX processors]), + [build_imx_gpio=$enableval], [build_imx_gpio=no]) ], [ build_ep93xx=no build_at91rm9200=no build_bcm2835gpio=no + build_imx_gpio=no ]) AC_ARG_ENABLE([gw16012], @@ -516,6 +520,13 @@ AS_IF([test "x$build_bcm2835gpio" = "xyes"], [ AC_DEFINE([BUILD_BCM2835GPIO], [0], [0 if you don't want bcm2835gpio.]) ]) +AS_IF([test "x$build_imx_gpio" = "xyes"], [ + build_bitbang=yes + AC_DEFINE([BUILD_IMX_GPIO], [1], [1 if you want imx_gpio.]) +], [ + AC_DEFINE([BUILD_IMX_GPIO], [0], [0 if you don't want imx_gpio.]) +]) + AS_IF([test "x$parport_use_ppdev" = "xyes"], [ AC_DEFINE([PARPORT_USE_PPDEV], [1], [1 if you want parport to use ppdev.]) ], [ @@ -686,6 +697,7 @@ AM_CONDITIONAL([ZY1000_MASTER], [test "x$build_zy1000_master" = "xyes"]) AM_CONDITIONAL([IOUTIL], [test "x$build_ioutil" = "xyes"]) AM_CONDITIONAL([AT91RM9200], [test "x$build_at91rm9200" = "xyes"]) AM_CONDITIONAL([BCM2835GPIO], [test "x$build_bcm2835gpio" = "xyes"]) +AM_CONDITIONAL([IMX_GPIO], [test "x$build_imx_gpio" = "xyes"]) AM_CONDITIONAL([BITBANG], [test "x$build_bitbang" = "xyes"]) AM_CONDITIONAL([JTAG_VPI], [test "x$build_jtag_vpi" = "xyes" -o "x$build_jtag_vpi" = "xyes"]) AM_CONDITIONAL([USB_BLASTER_DRIVER], [test "x$enable_usb_blaster" != "xno" -o "x$enable_usb_blaster_2" != "xno"]) diff --git a/doc/openocd.texi b/doc/openocd.texi index 845080ef..373eacbb 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -595,6 +595,9 @@ produced, PDF schematics are easily found and it is easy to make. @item @b{bcm2835gpio} @* A BCM2835-based board (e.g. Raspberry Pi) using the GPIO pins of the expansion header. +@item @b{imx_gpio} +@* A NXP i.MX-based board (e.g. Wandboard) using the GPIO pins (should work on any i.MX processor). + @item @b{jtag_vpi} @* A JTAG driver acting as a client for the JTAG VPI server interface. @* Link: @url{http://github.com/fjullien/jtag_vpi} @@ -2992,6 +2995,18 @@ pinout. @end deffn +@deffn {Interface Driver} {imx_gpio} +i.MX SoC is present in many community boards. Wandboard is an example +of the one which is most popular. + +This driver is mostly the same as bcm2835gpio. + +See @file{interface/imx-native.cfg} for a sample config and +pinout. + +@end deffn + + @deffn {Interface Driver} {openjtag} OpenJTAG compatible USB adapter. This defines some driver-specific commands: diff --git a/src/jtag/drivers/Makefile.am b/src/jtag/drivers/Makefile.am index e0c54216..3e5974da 100644 --- a/src/jtag/drivers/Makefile.am +++ b/src/jtag/drivers/Makefile.am @@ -144,14 +144,15 @@ endif if BCM2835GPIO DRIVERFILES += %D%/bcm2835gpio.c endif - if OPENJTAG DRIVERFILES += %D%/openjtag.c endif - if CMSIS_DAP DRIVERFILES += %D%/cmsis_dap_usb.c endif +if IMX_GPIO +DRIVERFILES += %D%/imx_gpio.c +endif if KITPROG DRIVERFILES += %D%/kitprog.c diff --git a/src/jtag/drivers/imx_gpio.c b/src/jtag/drivers/imx_gpio.c new file mode 100644 index 00000000..f33d1097 --- /dev/null +++ b/src/jtag/drivers/imx_gpio.c @@ -0,0 +1,552 @@ +/*************************************************************************** + * Copyright (C) 2017 by Grzegorz Kostka, kostka.grzegorz@gmail.com * + * * + * Based on bcm2835gpio.c * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program. If not, see . * + ***************************************************************************/ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include +#include "bitbang.h" + +#include + +#define IMX_GPIO_BASE 0x0209c000 +#define IMX_GPIO_SIZE 0x00004000 +#define IMX_GPIO_REGS_COUNT 8 + +static uint32_t imx_gpio_peri_base = IMX_GPIO_BASE; + +struct imx_gpio_regs { + uint32_t dr; + uint32_t gdir; + uint32_t psr; + uint32_t icr1; + uint32_t icr2; + uint32_t imr; + uint32_t isr; + uint32_t edge_sel; +} __attribute__((aligned(IMX_GPIO_SIZE))); + +static int dev_mem_fd; +static volatile struct imx_gpio_regs *pio_base; + +/* GPIO setup functions */ +static inline bool gpio_mode_get(int g) +{ + return pio_base[g / 32].gdir >> (g & 0x1F) & 1; +} + +static inline void gpio_mode_input_set(int g) +{ + pio_base[g / 32].gdir &= ~(1u << (g & 0x1F)); +} + +static inline void gpio_mode_output_set(int g) +{ + pio_base[g / 32].gdir |= (1u << (g & 0x1F)); +} + +static inline void gpio_mode_set(int g, int m) +{ + (m) ? gpio_mode_output_set(g) : gpio_mode_input_set(g); +} + +static inline void gpio_set(int g) +{ + pio_base[g / 32].dr |= (1u << (g & 0x1F)); +} + +static inline void gpio_clear(int g) +{ + pio_base[g / 32].dr &= ~(1u << (g & 0x1F)); +} + +static inline bool gpio_level(int g) +{ + return pio_base[g / 32].dr >> (g & 0x1F) & 1; +} + +static int imx_gpio_read(void); +static void imx_gpio_write(int tck, int tms, int tdi); +static void imx_gpio_reset(int trst, int srst); + +static int imx_gpio_swdio_read(void); +static void imx_gpio_swdio_drive(bool is_output); + +static int imx_gpio_init(void); +static int imx_gpio_quit(void); + +static struct bitbang_interface imx_gpio_bitbang = { + .read = imx_gpio_read, + .write = imx_gpio_write, + .reset = imx_gpio_reset, + .swdio_read = imx_gpio_swdio_read, + .swdio_drive = imx_gpio_swdio_drive, + .blink = NULL +}; + +/* GPIO numbers for each signal. Negative values are invalid */ +static int tck_gpio = -1; +static int tck_gpio_mode; +static int tms_gpio = -1; +static int tms_gpio_mode; +static int tdi_gpio = -1; +static int tdi_gpio_mode; +static int tdo_gpio = -1; +static int tdo_gpio_mode; +static int trst_gpio = -1; +static int trst_gpio_mode; +static int srst_gpio = -1; +static int srst_gpio_mode; +static int swclk_gpio = -1; +static int swclk_gpio_mode; +static int swdio_gpio = -1; +static int swdio_gpio_mode; + +/* Transition delay coefficients. Tuned for IMX6UL 528MHz. Adjusted + * experimentally for:10kHz, 100Khz, 500KHz. Speeds above 800Khz are impossible + * to reach via memory mapped method (at least for IMX6UL@528MHz). + * Measured mmap raw GPIO toggling speed on IMX6UL@528MHz: 1.3MHz. + */ +static int speed_coeff = 50000; +static int speed_offset = 100; +static unsigned int jtag_delay; + +static int imx_gpio_read(void) +{ + return gpio_level(tdo_gpio); +} + +static void imx_gpio_write(int tck, int tms, int tdi) +{ + tms ? gpio_set(tms_gpio) : gpio_clear(tms_gpio); + tdi ? gpio_set(tdi_gpio) : gpio_clear(tdi_gpio); + tck ? gpio_set(tck_gpio) : gpio_clear(tck_gpio); + + for (unsigned int i = 0; i < jtag_delay; i++) + asm volatile (""); +} + +static void imx_gpio_swd_write(int tck, int tms, int tdi) +{ + tdi ? gpio_set(swdio_gpio) : gpio_clear(swdio_gpio); + tck ? gpio_set(swclk_gpio) : gpio_clear(swclk_gpio); + + for (unsigned int i = 0; i < jtag_delay; i++) + asm volatile (""); +} + +/* (1) assert or (0) deassert reset lines */ +static void imx_gpio_reset(int trst, int srst) +{ + if (trst_gpio != -1) + trst ? gpio_set(trst_gpio) : gpio_clear(trst_gpio); + + if (srst_gpio != -1) + srst ? gpio_set(srst_gpio) : gpio_clear(srst_gpio); +} + +static void imx_gpio_swdio_drive(bool is_output) +{ + if (is_output) + gpio_mode_output_set(swdio_gpio); + else + gpio_mode_input_set(swdio_gpio); +} + +static int imx_gpio_swdio_read(void) +{ + return gpio_level(swdio_gpio); +} + +static int imx_gpio_khz(int khz, int *jtag_speed) +{ + if (!khz) { + LOG_DEBUG("RCLK not supported"); + return ERROR_FAIL; + } + *jtag_speed = speed_coeff/khz - speed_offset; + if (*jtag_speed < 0) + *jtag_speed = 0; + return ERROR_OK; +} + +static int imx_gpio_speed_div(int speed, int *khz) +{ + *khz = speed_coeff/(speed + speed_offset); + return ERROR_OK; +} + +static int imx_gpio_speed(int speed) +{ + jtag_delay = speed; + return ERROR_OK; +} + +static int is_gpio_valid(int gpio) +{ + return gpio >= 0 && gpio < 32 * IMX_GPIO_REGS_COUNT; +} + +COMMAND_HANDLER(imx_gpio_handle_jtag_gpionums) +{ + if (CMD_ARGC == 4) { + COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], tck_gpio); + COMMAND_PARSE_NUMBER(int, CMD_ARGV[1], tms_gpio); + COMMAND_PARSE_NUMBER(int, CMD_ARGV[2], tdi_gpio); + COMMAND_PARSE_NUMBER(int, CMD_ARGV[3], tdo_gpio); + } else if (CMD_ARGC != 0) { + return ERROR_COMMAND_SYNTAX_ERROR; + } + + command_print(CMD_CTX, + "imx_gpio GPIO config: tck = %d, tms = %d, tdi = %d, tdo = %d", + tck_gpio, tms_gpio, tdi_gpio, tdo_gpio); + + return ERROR_OK; +} + +COMMAND_HANDLER(imx_gpio_handle_jtag_gpionum_tck) +{ + if (CMD_ARGC == 1) + COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], tck_gpio); + + command_print(CMD_CTX, "imx_gpio GPIO config: tck = %d", tck_gpio); + return ERROR_OK; +} + +COMMAND_HANDLER(imx_gpio_handle_jtag_gpionum_tms) +{ + if (CMD_ARGC == 1) + COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], tms_gpio); + + command_print(CMD_CTX, "imx_gpio GPIO config: tms = %d", tms_gpio); + return ERROR_OK; +} + +COMMAND_HANDLER(imx_gpio_handle_jtag_gpionum_tdo) +{ + if (CMD_ARGC == 1) + COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], tdo_gpio); + + command_print(CMD_CTX, "imx_gpio GPIO config: tdo = %d", tdo_gpio); + return ERROR_OK; +} + +COMMAND_HANDLER(imx_gpio_handle_jtag_gpionum_tdi) +{ + if (CMD_ARGC == 1) + COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], tdi_gpio); + + command_print(CMD_CTX, "imx_gpio GPIO config: tdi = %d", tdi_gpio); + return ERROR_OK; +} + +COMMAND_HANDLER(imx_gpio_handle_jtag_gpionum_srst) +{ + if (CMD_ARGC == 1) + COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], srst_gpio); + + command_print(CMD_CTX, "imx_gpio GPIO config: srst = %d", srst_gpio); + return ERROR_OK; +} + +COMMAND_HANDLER(imx_gpio_handle_jtag_gpionum_trst) +{ + if (CMD_ARGC == 1) + COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], trst_gpio); + + command_print(CMD_CTX, "imx_gpio GPIO config: trst = %d", trst_gpio); + return ERROR_OK; +} + +COMMAND_HANDLER(imx_gpio_handle_swd_gpionums) +{ + if (CMD_ARGC == 2) { + COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], swclk_gpio); + COMMAND_PARSE_NUMBER(int, CMD_ARGV[1], swdio_gpio); + } else if (CMD_ARGC != 0) { + return ERROR_COMMAND_SYNTAX_ERROR; + } + + command_print(CMD_CTX, + "imx_gpio GPIO nums: swclk = %d, swdio = %d", + swclk_gpio, swdio_gpio); + + return ERROR_OK; +} + +COMMAND_HANDLER(imx_gpio_handle_swd_gpionum_swclk) +{ + if (CMD_ARGC == 1) + COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], swclk_gpio); + + command_print(CMD_CTX, "imx_gpio num: swclk = %d", swclk_gpio); + return ERROR_OK; +} + +COMMAND_HANDLER(imx_gpio_handle_swd_gpionum_swdio) +{ + if (CMD_ARGC == 1) + COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], swdio_gpio); + + command_print(CMD_CTX, "imx_gpio num: swdio = %d", swdio_gpio); + return ERROR_OK; +} + +COMMAND_HANDLER(imx_gpio_handle_speed_coeffs) +{ + if (CMD_ARGC == 2) { + COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], speed_coeff); + COMMAND_PARSE_NUMBER(int, CMD_ARGV[1], speed_offset); + } + return ERROR_OK; +} + +COMMAND_HANDLER(imx_gpio_handle_peripheral_base) +{ + if (CMD_ARGC == 1) + COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], imx_gpio_peri_base); + return ERROR_OK; +} + +static const struct command_registration imx_gpio_command_handlers[] = { + { + .name = "imx_gpio_jtag_nums", + .handler = &imx_gpio_handle_jtag_gpionums, + .mode = COMMAND_CONFIG, + .help = "gpio numbers for tck, tms, tdi, tdo. (in that order)", + .usage = "(tck tms tdi tdo)* ", + }, + { + .name = "imx_gpio_tck_num", + .handler = &imx_gpio_handle_jtag_gpionum_tck, + .mode = COMMAND_CONFIG, + .help = "gpio number for tck.", + }, + { + .name = "imx_gpio_tms_num", + .handler = &imx_gpio_handle_jtag_gpionum_tms, + .mode = COMMAND_CONFIG, + .help = "gpio number for tms.", + }, + { + .name = "imx_gpio_tdo_num", + .handler = &imx_gpio_handle_jtag_gpionum_tdo, + .mode = COMMAND_CONFIG, + .help = "gpio number for tdo.", + }, + { + .name = "imx_gpio_tdi_num", + .handler = &imx_gpio_handle_jtag_gpionum_tdi, + .mode = COMMAND_CONFIG, + .help = "gpio number for tdi.", + }, + { + .name = "imx_gpio_swd_nums", + .handler = &imx_gpio_handle_swd_gpionums, + .mode = COMMAND_CONFIG, + .help = "gpio numbers for swclk, swdio. (in that order)", + .usage = "(swclk swdio)* ", + }, + { + .name = "imx_gpio_swclk_num", + .handler = &imx_gpio_handle_swd_gpionum_swclk, + .mode = COMMAND_CONFIG, + .help = "gpio number for swclk.", + }, + { + .name = "imx_gpio_swdio_num", + .handler = &imx_gpio_handle_swd_gpionum_swdio, + .mode = COMMAND_CONFIG, + .help = "gpio number for swdio.", + }, + { + .name = "imx_gpio_srst_num", + .handler = &imx_gpio_handle_jtag_gpionum_srst, + .mode = COMMAND_CONFIG, + .help = "gpio number for srst.", + }, + { + .name = "imx_gpio_trst_num", + .handler = &imx_gpio_handle_jtag_gpionum_trst, + .mode = COMMAND_CONFIG, + .help = "gpio number for trst.", + }, + { + .name = "imx_gpio_speed_coeffs", + .handler = &imx_gpio_handle_speed_coeffs, + .mode = COMMAND_CONFIG, + .help = "SPEED_COEFF and SPEED_OFFSET for delay calculations.", + }, + { + .name = "imx_gpio_peripheral_base", + .handler = &imx_gpio_handle_peripheral_base, + .mode = COMMAND_CONFIG, + .help = "peripheral base to access GPIOs (0x0209c000 for most IMX).", + }, + + COMMAND_REGISTRATION_DONE +}; + +static const char * const imx_gpio_transports[] = { "jtag", "swd", NULL }; + +struct jtag_interface imx_gpio_interface = { + .name = "imx_gpio", + .supported = DEBUG_CAP_TMS_SEQ, + .execute_queue = bitbang_execute_queue, + .transports = imx_gpio_transports, + .swd = &bitbang_swd, + .speed = imx_gpio_speed, + .khz = imx_gpio_khz, + .speed_div = imx_gpio_speed_div, + .commands = imx_gpio_command_handlers, + .init = imx_gpio_init, + .quit = imx_gpio_quit, +}; + +static bool imx_gpio_jtag_mode_possible(void) +{ + if (!is_gpio_valid(tck_gpio)) + return 0; + if (!is_gpio_valid(tms_gpio)) + return 0; + if (!is_gpio_valid(tdi_gpio)) + return 0; + if (!is_gpio_valid(tdo_gpio)) + return 0; + return 1; +} + +static bool imx_gpio_swd_mode_possible(void) +{ + if (!is_gpio_valid(swclk_gpio)) + return 0; + if (!is_gpio_valid(swdio_gpio)) + return 0; + return 1; +} + +static int imx_gpio_init(void) +{ + bitbang_interface = &imx_gpio_bitbang; + + LOG_INFO("imx_gpio GPIO JTAG/SWD bitbang driver"); + + if (imx_gpio_jtag_mode_possible()) { + if (imx_gpio_swd_mode_possible()) + LOG_INFO("JTAG and SWD modes enabled"); + else + LOG_INFO("JTAG only mode enabled (specify swclk and swdio gpio to add SWD mode)"); + } else if (imx_gpio_swd_mode_possible()) { + LOG_INFO("SWD only mode enabled (specify tck, tms, tdi and tdo gpios to add JTAG mode)"); + } else { + LOG_ERROR("Require tck, tms, tdi and tdo gpios for JTAG mode and/or swclk and swdio gpio for SWD mode"); + return ERROR_JTAG_INIT_FAILED; + } + + dev_mem_fd = open("/dev/mem", O_RDWR | O_SYNC); + if (dev_mem_fd < 0) { + perror("open"); + return ERROR_JTAG_INIT_FAILED; + } + + + LOG_INFO("imx_gpio mmap: pagesize: %u, regionsize: %u", + sysconf(_SC_PAGE_SIZE), IMX_GPIO_REGS_COUNT * IMX_GPIO_SIZE); + pio_base = mmap(NULL, IMX_GPIO_REGS_COUNT * IMX_GPIO_SIZE, + PROT_READ | PROT_WRITE, + MAP_SHARED, dev_mem_fd, imx_gpio_peri_base); + + if (pio_base == MAP_FAILED) { + perror("mmap"); + close(dev_mem_fd); + return ERROR_JTAG_INIT_FAILED; + } + + /* + * Configure TDO as an input, and TDI, TCK, TMS, TRST, SRST + * as outputs. Drive TDI and TCK low, and TMS/TRST/SRST high. + */ + if (imx_gpio_jtag_mode_possible()) { + tdo_gpio_mode = gpio_mode_get(tdo_gpio); + tdi_gpio_mode = gpio_mode_get(tdi_gpio); + tck_gpio_mode = gpio_mode_get(tck_gpio); + tms_gpio_mode = gpio_mode_get(tms_gpio); + + gpio_clear(tdi_gpio); + gpio_clear(tck_gpio); + gpio_set(tms_gpio); + + gpio_mode_input_set(tdo_gpio); + gpio_mode_output_set(tdi_gpio); + gpio_mode_output_set(tck_gpio); + gpio_mode_output_set(tms_gpio); + } + if (imx_gpio_swd_mode_possible()) { + swclk_gpio_mode = gpio_mode_get(swclk_gpio); + swdio_gpio_mode = gpio_mode_get(swdio_gpio); + + gpio_clear(swdio_gpio); + gpio_clear(swclk_gpio); + gpio_mode_output_set(swclk_gpio); + gpio_mode_output_set(swdio_gpio); + } + if (trst_gpio != -1) { + trst_gpio_mode = gpio_mode_get(trst_gpio); + gpio_set(trst_gpio); + gpio_mode_output_set(trst_gpio); + } + if (srst_gpio != -1) { + srst_gpio_mode = gpio_mode_get(srst_gpio); + gpio_set(srst_gpio); + gpio_mode_output_set(srst_gpio); + } + + LOG_DEBUG("saved pinmux settings: tck %d tms %d tdi %d " + "tdo %d trst %d srst %d", tck_gpio_mode, tms_gpio_mode, + tdi_gpio_mode, tdo_gpio_mode, trst_gpio_mode, srst_gpio_mode); + + if (swd_mode) { + imx_gpio_bitbang.write = imx_gpio_swd_write; + bitbang_switch_to_swd(); + } + + return ERROR_OK; +} + +static int imx_gpio_quit(void) +{ + if (imx_gpio_jtag_mode_possible()) { + gpio_mode_set(tdo_gpio, tdo_gpio_mode); + gpio_mode_set(tdi_gpio, tdi_gpio_mode); + gpio_mode_set(tck_gpio, tck_gpio_mode); + gpio_mode_set(tms_gpio, tms_gpio_mode); + } + if (imx_gpio_swd_mode_possible()) { + gpio_mode_set(swclk_gpio, swclk_gpio_mode); + gpio_mode_set(swdio_gpio, swdio_gpio_mode); + } + if (trst_gpio != -1) + gpio_mode_set(trst_gpio, trst_gpio_mode); + if (srst_gpio != -1) + gpio_mode_set(srst_gpio, srst_gpio_mode); + + return ERROR_OK; +} diff --git a/src/jtag/interfaces.c b/src/jtag/interfaces.c index 396043d2..174c63a3 100644 --- a/src/jtag/interfaces.c +++ b/src/jtag/interfaces.c @@ -126,6 +126,9 @@ extern struct jtag_interface cmsis_dap_interface; #if BUILD_KITPROG == 1 extern struct jtag_interface kitprog_interface; #endif +#if BUILD_IMX_GPIO == 1 +extern struct jtag_interface imx_gpio_interface; +#endif #endif /* standard drivers */ /** @@ -222,6 +225,9 @@ struct jtag_interface *jtag_interfaces[] = { #if BUILD_KITPROG == 1 &kitprog_interface, #endif +#if BUILD_IMX_GPIO == 1 + &imx_gpio_interface, +#endif #endif /* standard drivers */ NULL, }; diff --git a/tcl/interface/imx-native.cfg b/tcl/interface/imx-native.cfg new file mode 100644 index 00000000..c2f80eb5 --- /dev/null +++ b/tcl/interface/imx-native.cfg @@ -0,0 +1,35 @@ +# +# Config for using NXP IMX CPU +# +# This is best used with a fast enough buffer but also +# is suitable for direct connection if the target voltage +# matches to host voltage and the cable is short enough. +# +# + +interface imx_gpio + +# For most IMX processors 0x0209c000 +imx_gpio_peripheral_base 0x0209c000 + +# Transition delay calculation: SPEED_COEFF/khz - SPEED_OFFSET +# These depend on system clock, calibrated for IMX6UL@528MHz +# imx_gpio_speed SPEED_COEFF SPEED_OFFSET +imx_gpio_speed_coeffs 50000 50 + +# Each of the JTAG lines need a gpio number set: tck tms tdi tdo. +# Example configuration: +# imx_gpio_jtag_nums 6 7 8 9 + +# SWD interface pins: swclk swdio +# Example configuration: +imx_gpio_swd_nums 1 6 + +# imx_gpio_trst_num 10 +# reset_config trst_only + +# imx_gpio_srst_num 11 +# reset_config srst_only srst_push_pull + +# or if you have both connected, +# reset_config trst_and_srst srst_push_pull \ No newline at end of file -- 2.39.5