From 8626cb8021d92603cb6a305fb686510a8d14d6bd Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Thu, 8 Oct 2015 11:31:47 +0530 Subject: [PATCH] ARM: k2e/l: Apply WA for selecting PA clock source On keystone2 Lamarr and Edison platforms, the PA clocksource mux in PLL REG1, can be changed only after enabling its clock domain. So selecting the output of PASS PLL as input to PA only after enabling the clockdomain. This is as per the debug done by "Vitaly Andrianov " and based on the previous work done by "Hao Zhang " Fixes: d634a0775bcf ("ARM: keystone2: Cleanup PLL init code") Reported-by: Vitaly Andrianov Tested-by: Vitaly Andrianov Signed-off-by: Lokesh Vutla --- arch/arm/mach-keystone/clock.c | 10 +++++++--- arch/arm/mach-keystone/include/mach/clock.h | 1 + board/ti/ks2_evm/board.c | 4 ++++ 3 files changed, 12 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-keystone/clock.c b/arch/arm/mach-keystone/clock.c index fc3eadb3f2..6cb646734a 100644 --- a/arch/arm/mach-keystone/clock.c +++ b/arch/arm/mach-keystone/clock.c @@ -33,6 +33,11 @@ const struct keystone_pll_regs keystone_pll_regs[] = { [DDR3B_PLL] = {KS2_DDR3BPLLCTL0, KS2_DDR3BPLLCTL1}, }; +inline void pll_pa_clk_sel(void) +{ + setbits_le32(keystone_pll_regs[PASS_PLL].reg1, CFG_PLLCTL1_PAPLL_MASK); +} + static void wait_for_completion(const struct pll_init_data *data) { int i; @@ -180,9 +185,8 @@ void configure_secondary_pll(const struct pll_init_data *data) sdelay(21000); /* Select the Output of PASS PLL as input to PASS */ - if (data->pll == PASS_PLL) - setbits_le32(keystone_pll_regs[data->pll].reg1, - CFG_PLLCTL1_PAPLL_MASK); + if (data->pll == PASS_PLL && cpu_is_k2hk()) + pll_pa_clk_sel(); /* Select the Output of ARM PLL as input to ARM */ if (data->pll == TETRIS_PLL) diff --git a/arch/arm/mach-keystone/include/mach/clock.h b/arch/arm/mach-keystone/include/mach/clock.h index ddc5f8e501..7e517020ae 100644 --- a/arch/arm/mach-keystone/include/mach/clock.h +++ b/arch/arm/mach-keystone/include/mach/clock.h @@ -118,6 +118,7 @@ unsigned long clk_round_rate(unsigned int clk, unsigned long hz); int clk_set_rate(unsigned int clk, unsigned long hz); int get_max_dev_speed(void); int get_max_arm_speed(void); +void pll_pa_clk_sel(void); #endif #endif diff --git a/board/ti/ks2_evm/board.c b/board/ti/ks2_evm/board.c index 859a26011c..bee42bcc0c 100644 --- a/board/ti/ks2_evm/board.c +++ b/board/ti/ks2_evm/board.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -81,6 +82,9 @@ int board_eth_init(bd_t *bis) if (psc_enable_module(KS2_LPSC_CRYPTO)) return -1; + if (cpu_is_k2e() || cpu_is_k2l()) + pll_pa_clk_sel(); + port_num = get_num_eth_ports(); for (j = 0; j < port_num; j++) { -- 2.39.5