From 869d14b4cc2e47de2ddcb117bad0407a44436684 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Sat, 10 May 2008 10:30:36 +0200 Subject: [PATCH] ppc4xx: Update Makalu defconfig to use device-tree booting as default This patch reworks the default environment on Makalu. Now "net_nfs" for example uses the device-tree style booting formerly know as "net_nfs_fdt". Also the addresses in RAM were changed because of the new image booting support, which check for image overwriting. So the addresses needed to get adjusted. Signed-off-by: Stefan Roese --- include/configs/makalu.h | 29 ++++++++++++++++++----------- 1 file changed, 18 insertions(+), 11 deletions(-) diff --git a/include/configs/makalu.h b/include/configs/makalu.h index 6556666d27..67243d4e40 100644 --- a/include/configs/makalu.h +++ b/include/configs/makalu.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007 + * (C) Copyright 2007-2008 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * See file CREDITS for list of people who contributed to this @@ -172,22 +172,28 @@ ":${hostname}:${netdev}:off panic=1\0" \ "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ "addmisc=setenv bootargs ${bootargs} rtc-x1205.probe=0,0x6f\0" \ - "net_nfs=tftp 200000 ${bootfile};" \ + "flash_self_old=run ramargs addip addtty addmisc;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "flash_self=run ramargs addip addtty addmisc;" \ + "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ + "flash_nfs_old=run nfsargs addip addtty addmisc;" \ + "bootm ${kernel_addr}\0" \ + "flash_nfs=run nfsargs addip addtty addmisc;" \ + "bootm ${kernel_addr} - ${fdt_addr}\0" \ + "net_nfs_old=tftp ${kernel_addr_r} ${bootfile};" \ "run nfsargs addip addtty addmisc;" \ - "bootm 200000\0" \ - "net_nfs_fdt=tftp 200000 ${bootfile};" \ - "tftp ${fdt_addr} ${fdt_file};" \ + "bootm ${kernel_addr_r}\0" \ + "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ + "tftp ${fdt_addr_r} ${fdt_file}; " \ "run nfsargs addip addtty addmisc;" \ - "bootm 200000 - ${fdt_addr}\0" \ - "flash_nfs=run nfsargs addip addtty addmisc;" \ - "bootm ${kernel_addr}\0" \ - "flash_self=run ramargs addip addtty addmisc;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ "rootpath=/opt/eldk/ppc_4xx\0" \ "bootfile=makalu/uImage\0" \ "fdt_file=makalu/makalu.dtb\0" \ - "fdt_addr=400000\0" \ + "kernel_addr_r=400000\0" \ + "fdt_addr_r=800000\0" \ "kernel_addr=fc000000\0" \ + "fdt_addr=fc1e0000\0" \ "ramdisk_addr=fc200000\0" \ "initrd_high=30000000\0" \ "load=tftp 200000 makalu/u-boot.bin\0" \ @@ -212,6 +218,7 @@ #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_SUBNETMASK /* * Command line configuration. -- 2.39.5