From 890a02e8ee6b8c26a6e3e505e1a2d29cd73aa6f6 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 12 Nov 2008 13:31:02 +0100 Subject: [PATCH] net: smc911x: Make register read/write functions weak This patch changes the reg_read/_write to smc911x_reg_read/_write and defines then as weak so that they can be overridden by board specific version. This will be used by the upcoming VCTH board support. Signed-off-by: Stefan Roese Signed-off-by: Ben Warren --- drivers/net/smc911x.c | 77 ++++++++++++++++++++++--------------------- 1 file changed, 40 insertions(+), 37 deletions(-) diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index 648c94cbbb..6c5a4b3e2c 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -34,21 +34,24 @@ #endif #if defined (CONFIG_DRIVER_SMC911X_32_BIT) -static inline u32 reg_read(u32 addr) +static inline u32 __smc911x_reg_read(u32 addr) { return *(volatile u32*)addr; } -static inline void reg_write(u32 addr, u32 val) +u32 smc911x_reg_read(u32 addr) __attribute__((weak, alias("__smc911x_reg_read"))); + +static inline void __smc911x_reg_write(u32 addr, u32 val) { *(volatile u32*)addr = val; } +void smc911x_reg_write(u32 addr, u32 val) __attribute__((weak, alias("__smc911x_reg_write"))); #elif defined (CONFIG_DRIVER_SMC911X_16_BIT) -static inline u32 reg_read(u32 addr) +static inline u32 smc911x_reg_read(u32 addr) { volatile u16 *addr_16 = (u16 *)addr; return ((*addr_16 & 0x0000ffff) | (*(addr_16 + 1) << 16)); } -static inline void reg_write(u32 addr, u32 val) +static inline void smc911x_reg_write(u32 addr, u32 val) { *(volatile u16*)addr = (u16)val; *(volatile u16*)(addr + 2) = (u16)(val >> 16); @@ -58,9 +61,9 @@ static inline void reg_write(u32 addr, u32 val) #endif /* CONFIG_DRIVER_SMC911X_16_BIT */ u32 pkt_data_pull(u32 addr) \ - __attribute__ ((weak, alias ("reg_read"))); + __attribute__ ((weak, alias ("smc911x_reg_read"))); void pkt_data_push(u32 addr, u32 val) \ - __attribute__ ((weak, alias ("reg_write"))); + __attribute__ ((weak, alias ("smc911x_reg_write"))); #define mdelay(n) udelay((n)*1000) @@ -407,22 +410,22 @@ static const struct chip_id chip_ids[] = { u32 smc911x_get_mac_csr(u8 reg) { - while (reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY) + while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY) ; - reg_write(MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg); - while (reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY) + smc911x_reg_write(MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg); + while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY) ; - return reg_read(MAC_CSR_DATA); + return smc911x_reg_read(MAC_CSR_DATA); } void smc911x_set_mac_csr(u8 reg, u32 data) { - while (reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY) + while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY) ; - reg_write(MAC_CSR_DATA, data); - reg_write(MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | reg); - while (reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY) + smc911x_reg_write(MAC_CSR_DATA, data); + smc911x_reg_write(MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | reg); + while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY) ; } @@ -496,10 +499,10 @@ static int smc911x_phy_reset(void) { u32 reg; - reg = reg_read(PMT_CTRL); + reg = smc911x_reg_read(PMT_CTRL); reg &= ~0xfffff030; reg |= PMT_CTRL_PHY_RST; - reg_write(PMT_CTRL, reg); + smc911x_reg_write(PMT_CTRL, reg); mdelay(100); @@ -541,13 +544,13 @@ static void smc911x_reset(void) int timeout; /* Take out of PM setting first */ - if (reg_read(PMT_CTRL) & PMT_CTRL_READY) { + if (smc911x_reg_read(PMT_CTRL) & PMT_CTRL_READY) { /* Write to the bytetest will take out of powerdown */ - reg_write(BYTE_TEST, 0x0); + smc911x_reg_write(BYTE_TEST, 0x0); timeout = 10; - while (timeout-- && !(reg_read(PMT_CTRL) & PMT_CTRL_READY)) + while (timeout-- && !(smc911x_reg_read(PMT_CTRL) & PMT_CTRL_READY)) udelay(10); if (!timeout) { printf(DRIVERNAME @@ -557,12 +560,12 @@ static void smc911x_reset(void) } /* Disable interrupts */ - reg_write(INT_EN, 0); + smc911x_reg_write(INT_EN, 0); - reg_write(HW_CFG, HW_CFG_SRST); + smc911x_reg_write(HW_CFG, HW_CFG_SRST); timeout = 1000; - while (timeout-- && reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY) + while (timeout-- && smc911x_reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY) udelay(10); if (!timeout) { @@ -572,23 +575,23 @@ static void smc911x_reset(void) /* Reset the FIFO level and flow control settings */ smc911x_set_mac_csr(FLOW, FLOW_FCPT | FLOW_FCEN); - reg_write(AFC_CFG, 0x0050287F); + smc911x_reg_write(AFC_CFG, 0x0050287F); /* Set to LED outputs */ - reg_write(GPIO_CFG, 0x70070000); + smc911x_reg_write(GPIO_CFG, 0x70070000); } static void smc911x_enable(void) { /* Enable TX */ - reg_write(HW_CFG, 8 << 16 | HW_CFG_SF); + smc911x_reg_write(HW_CFG, 8 << 16 | HW_CFG_SF); - reg_write(GPT_CFG, GPT_CFG_TIMER_EN | 10000); + smc911x_reg_write(GPT_CFG, GPT_CFG_TIMER_EN | 10000); - reg_write(TX_CFG, TX_CFG_TX_ON); + smc911x_reg_write(TX_CFG, TX_CFG_TX_ON); /* no padding to start of packets */ - reg_write(RX_CFG, 0); + smc911x_reg_write(RX_CFG, 0); smc911x_set_mac_csr(MAC_CR, MAC_CR_TXEN | MAC_CR_RXEN | MAC_CR_HBDIS); @@ -600,13 +603,13 @@ int eth_init(bd_t *bd) printf(DRIVERNAME ": initializing\n"); - val = reg_read(BYTE_TEST); + val = smc911x_reg_read(BYTE_TEST); if (val != 0x87654321) { printf(DRIVERNAME ": Invalid chip endian 0x%08lx\n", val); goto err_out; } - val = reg_read(ID_REV) >> 16; + val = smc911x_reg_read(ID_REV) >> 16; for (i = 0; chip_ids[i].id != 0; i++) { if (chip_ids[i].id == val) break; } @@ -640,8 +643,8 @@ int eth_send(volatile void *packet, int length) u32 tmplen; u32 status; - reg_write(TX_DATA_FIFO, TX_CMD_A_INT_FIRST_SEG | TX_CMD_A_INT_LAST_SEG | length); - reg_write(TX_DATA_FIFO, length); + smc911x_reg_write(TX_DATA_FIFO, TX_CMD_A_INT_FIRST_SEG | TX_CMD_A_INT_LAST_SEG | length); + smc911x_reg_write(TX_DATA_FIFO, length); tmplen = (length + 3) / 4; @@ -649,12 +652,12 @@ int eth_send(volatile void *packet, int length) pkt_data_push(TX_DATA_FIFO, *data++); /* wait for transmission */ - while (!((reg_read(TX_FIFO_INF) & TX_FIFO_INF_TSUSED) >> 16)); + while (!((smc911x_reg_read(TX_FIFO_INF) & TX_FIFO_INF_TSUSED) >> 16)); /* get status. Ignore 'no carrier' error, it has no meaning for * full duplex operation */ - status = reg_read(TX_STATUS_FIFO) & (TX_STS_LOC | TX_STS_LATE_COLL | + status = smc911x_reg_read(TX_STATUS_FIFO) & (TX_STS_LOC | TX_STS_LATE_COLL | TX_STS_MANY_COLL | TX_STS_MANY_DEFER | TX_STS_UNDERRUN); if (!status) @@ -681,11 +684,11 @@ int eth_rx(void) u32 pktlen, tmplen; u32 status; - if ((reg_read(RX_FIFO_INF) & RX_FIFO_INF_RXSUSED) >> 16) { - status = reg_read(RX_STATUS_FIFO); + if ((smc911x_reg_read(RX_FIFO_INF) & RX_FIFO_INF_RXSUSED) >> 16) { + status = smc911x_reg_read(RX_STATUS_FIFO); pktlen = (status & RX_STS_PKT_LEN) >> 16; - reg_write(RX_CFG, 0); + smc911x_reg_write(RX_CFG, 0); tmplen = (pktlen + 2+ 3) / 4; while (tmplen--) -- 2.39.5