From 89d6f77288ce5106f013331447c7f0d5cb14eba7 Mon Sep 17 00:00:00 2001 From: Kern Sibbald Date: Mon, 22 Aug 2005 08:11:51 +0000 Subject: [PATCH] Final changes git-svn-id: https://bacula.svn.sourceforge.net/svnroot/bacula/trunk@2350 91ce42f0-d328-0410-95d8-f526ca767f89 --- bacula/ChangeLog | 4297 +--------------------------------------------- 1 file changed, 1 insertion(+), 4296 deletions(-) diff --git a/bacula/ChangeLog b/bacula/ChangeLog index c6de0d5ab5..816563f404 100644 --- a/bacula/ChangeLog +++ b/bacula/ChangeLog @@ -100,7 +100,7 @@ Changes to 1.37.33: could not be opened. In the case of a tape drive, there may be no tape in the drive. -Changes to 1.32.32: +Changes to 1.37.32: 02Aug05 - Correct PostgreSQL database scripts as suggested by a user. - Add additional info to FATAL message generated when a device @@ -1293,4298 +1293,3 @@ Changes to 1.37.2: - First cut of Python Events for Bacula. Director only. StartJob, EndJob, NewVolume events. -Version 1.36.1 released 26Nov04: -24Nov04 -- Take Dan's fix to the fix_postgresql_tables (thanks Dan) -- Increase Maximum Concurrent Jobs to 20 in SD and FD! -- Fix improper handling of autochanger Volumes that are not - marked InChanger. -22Nov04 -- Update authentication failure message to indicate possible - problem with Maximum Concurrent Jobs. Add to doc too. -- Commit PostgreSQL BIGINT fix -- apparently some people didn't - get it. -- Do not use a slot unless it is InChanger in the autochanger - code, otherwise autochanger gets upset not finding the Volume. -21Nov04 -- Make authentication timeout compile time configurable. - The value is set in src/baconfig.h -- Fix removing items from watchdog queue, which apparently - screwed up if there was more than one item. -- Rework mediaformat part of manual to separate out old - tape format for easier reading. -- Add a lot of debug code to the authentication code. -- Add seconds to the start/end times printed in the job report. -19Nov04 -- Fix mutex deadlock in dequeue of messages. -- Add debug code to FD authorization. -18Nov04 -- Increase authentication timeouts to 10 minutes. -15Nov04 -- Fix cancel bug in FD on /lib/tls with zero pid in - pthread_kill. -- Add date/time to all messages. -- Make Qmsg use time message was queued rather than time - printed. -- Indent job output two spaces. -13Nov04 -- Fix web page links for new manual. -- Grant postgresql permission to cdimages. -- Correct crash after "list nextvol" "list media" bug 160 -12Nov04 -- Fix scripts/Makefile.in missing ;\ -- thanks Martin -- A bit of work on btape to keep if from going into infinite - loops when things do not work well, and to print a bit - better info. -11Nov04 -- JobDefs Storage resource completely overrode anything - specified in Job resource -- bug 159 -- fixed. -- Fix syntax of renaming postgresql per Dan. -- Add working_directory to be /tmp for wx_console. -10Nov04 -- Allow both a JobId and a filename or list of files to be - specified on a restore command line. -- Save old mtx-changer before installing new one: bug 156 -- Fix errors in CDROM file pointed out by Scott. -09Nov04 -- Fix exepath when Bacula executed without path. -- Move test for socket libraries for Solaris in configure.in - before tcp wrapper tests so that linking works. -- Add "make copy-static-fd" to makefile in CDROM file to - copy existing static fd to CDROM rather than building it. -08Nov04 -- More doc updates -- Fix ps command for OpenBSD -- Rework the creation of indexes for SQL -- fall back - to the old code, but document what can be added. -06Nov04 -- Add new Daemon message handler in default DIR conf. -05Nov04 -- Fix Seg Fault with -D100 in bpipe.c. -- Fix Seg Fault in run specifying a JobId. -- Make mail from daemon with a Messages Resource use - the MailCommand with editing rather than the default - sendmail. -- Replace Jmsg in dispatch_message() with Qmsg. -- Make edit_job_codes handle NULL jcr. -04Nov04 -- Add M_ALERT class and put tape alerts into it. -- Fix Verify count vs found by not double counting files - that are split across files/Volumes. -30Oct04 -- Fix count returned from write_bsr_file() to handle multiple - volumes. This fixes most cases of the Verify VolumeToCatalog. -- Cleanup a bit the make clean for the rescue cdrom and remove - unneeded files from the CVS. -28Oct04 -- Fixed acquiring a tape so that it does not block all acquires - when operator intervention is needed. -- Platform build script updates from Scott -- Doc updates -- Add patch to force Linux LD_ASSUME_KERNEL to avoid using the - new /lib/tls. This is done in the startup scripts. -- Modify mtx-changer so that it checks for ONLINE while - waiting. -- Modify make_postgresql_tables.in so that EndBlock is stored - as a bigint. Prevents job failures when a disk volume is - larger than 2GB. -24Oct04 -- Add grep ONLINE to wait_for_drive() in mtx-changer.in -- More doc. -- Rebuild Scott's new configure - -Version 1.36.0 released 21Oct04: -Changes to 1.35.9: -19Oct04 -- Modify install of make_catalog_backup and delete_catalog_backup so - that it will not overwrite any existing file. -- Additional documentation. -- Modified detection of largefiles to always set all flags regardless - of the machine. -- Modify autostart scripts to start Bacula late in the process and - terminate it early. -- Drop CDImages table in drop database tables scripts. -- Alter casting of (void *) in gnome2-console/restore.c to pass - by a (long int) so that it works with 64 bit machines. -- Add more debug to heartbeat.c in FD for problem of dropped connections. -18Oct04 -- Adjust priorities for starting/stopping daemons to be - started late and stopped early as suggested by Marc Williams. -18Oct04 -- Adjust priorities for starting/stopping daemons to be - started late and stopped early as suggested by Marc Williams. -18Oct04 -- Fix crash on exit with -t option in FD on 2.6 kernels -- - uninitialized thread id variable. -- Add additional SD and FD debug info to detect network hang. -- Fix bnet_strerror() routine not to return stack pointer. -- Put latest update routines in updatedb. -16Oct04 -- Fix error during restore error reported by Christopher Hull when - no tape in the drive (open fails). -- Add more precise error reporting to FD when a network error - occurs. -15Oct04 -- Fix empty files reported by Marin (zero file_size in dev.c). -- Update all the db update scripts to include the new multiple - key index on File proposed by Martin, and to fix up a few - minor things with PostgreSQL. -- Apply Christopher Hull's patch for getting the catalog correct - during a restore. -- Created a patch for 1.34.6 (and code in 1.35) to detect passing - the A option to the FD, which means enable ACL processing. - Submitted by Ben Vitale. -13Oct04 -- Fix syntax error in make_mysql_tables.in pointed out by Scott. -12Oct04 -- Add a kludge to detect bad date/times, which cause a seg fault in - Microsoft's version of localtime_r(). So, now we know that Microsoft - programmers do not check return codes! -- Minor update to web site (new projects page). -- Remove bigint for filenameid from postgresql table -- as demonstrated - by Martin, it has negative performance repercussions. -- Rework getuser() and getgroup() to avoid any possible race condition - by returning the value in a buffer rather than from the cached table. -- Add a bit more debug code to the FD status output. - -Changes to 1.35.8: -09Oct04 -- Documentation. -- Integrate Peter Ericksson's dbx traceback scripts into Bacula -08Oct04 -- Fix segfault in lsmark command in restore tree. -- Fix segfault in editing numbers in count command of restore tree. -- Add missing #define for IPV6 found by Martin in address_conf.c -- Use strcasecmp() instead of strcmp() in address_conf.c -07Oct04 -- Fix bug where SD crashes on label if drive is not open - (i.e. Always Open = no). -- Added "Rerun Failed Levels = yes/no" -- Made calling offline_or_rewind() non-fatal if the - device is not open. -- Added Martin's suggestion to have multiple level index on - the file table. -- Update doc -- Fix misspelled #define in mysql.c for threading pointed out - by a user. -- Fix incorrect prototype. -- Attempt to fix Solaris crash in SD during status command. -04Oct04 -- Fix backspace to first character in conio.c -- Add umount command for Phil. :-) -- Fix update volume volfrompool. -- Modify restore to print an error message if the size of a - restored file does not correspond to the saved stat packet. -- Fix count of files to be restored *not* to include - top level created directories. - -Changes to 1.35.7: -03Oct04 -- Apply Martin's patch that puts back the run pool override - code -- dumb me for removing it. - -Changes to 1.35.6: -02Oct04 -- Create patches/README and the patch summary file. -- Use different share mode when opening files on WinMe/98/95 since - SHARE_DELETE is not implemented on those systems. -- In new syntax Includes, pass *all* files through the acceptance - filter so that no error messages will be printed for files that - cannot be opened if they are excluded. -01Oct04 -- Fix bug 126 (Martin) -- prevent failed console label request from - going into fixup code and thus trying to update the catalog. -- Always fold case in fnmatch() on Win32 systems -30Sep04 -- Create patches directory -- Apply Martin's patch for fixing console modifications to Verify Jobs. -- Fix Win32 so that it can backup files that are opened by programs - such as Word (certain open system files cannot be backed up). - -Changes to 1.35.5: -29Sep04 -- Fix Storage overrides in Run directive -- Fix seg fault in AlertCommand -- Fix btape "test" and "fill" commands to work with new SD - data structures. There are still problems ... -26Sep04 -- Correct buffer length passed to inet_ntop() in address_conf.c -- Increase the debug level of a lot of messages to reduce the - debugging "noise". -- Modify how ST_APPEND is handled so that nothing is written - to the Volume if it is not set. It is now set only when - the Volume label is verified, and released when the volume - is released. This required a number of minor but rather - critical and fundamental changes. -- Improve quickly terminating a job in the SD when it errs. - More status checking and a few additional checks on - job_canceled() and check more error return statuses. -- Added a number of debug statements (to be removed later) that - check the VolCatName for a name. -- Create a single subroutine that handles terminating writing - on a Volume at the end of the volume (or after an error). -- Continued to add use of the berrno classs for strerror(). -25Sep04 -- Apply conio patches supplied by Peter Eriksson for configure.in - conio.h and conio.c to make it work better on Solaris. -- Make run_grub print manual procedure for installing grub -- Add extra setsockopt keepalive. -- Add code to set as many options as possible in the system - tape driver for different OSes. -24Sep04 -- Apply Peter Eriksson's patch to configure.in fixes finding - correct libs on Solaris to link conio -- bug 121 -- Add expected number of files to Verify VolumeToCatalog, and - if it does not equal the examined files, fail the job. - Fixes bug -- 114 -- Modify the depend section of each Makefile.in to reference $(CXX) - instead of $(CC) -- bug 118 -- Remove the word "restore" from the Volumes needed message in - dird/bsr.c since the message is used for Restore and Verify. -- Fix initialization and copying of the storage resource when - starting jobs (and in jobq.c when restarting). In some cases - jcr->store was not set causing a segfault -- bug 116 -23Sep04 -- More doc. -- Pass EndFile and EndBlock to SD. -22Sep04 -- Fixed bscan to close() drive between tapes. -- Turn on transactions for SQLite and PostgreSQL if - multiple connections are turned on. -- Removed stripping of filename in ua_tree insertion routine. -- Fix split_path_and_filename() routines to return zero length - path and files. -- Modify update_tables scripts to convert a single blank filename - into an empty filename. -- Incremented the release number because this version requires - an update to the database. - Use: - cd src/cats - ./update_bacula_tables - to update an existing database. -- Implemented EndFile and EndBlock in the Media record. This will - allow Bacula to know exactly when to stop reading a tape if the - stupid tape driver does not give a logical end of tape indication - and Bacula writes to the end of the tape getting an I/O error. -- Added new routines to update the database, and there are - new database creation routines to add the two new Media columns. -- The Media record is updated each time a JobMedia record is created. - This keeps the Media record up to date. -- Undid the code to use automatic type converions to char * in - POOL_MEM. This is due to the ugly consequences of essentially - destroying the class type nature of the class. -- Removed all the old mp_char() #define code. - -Changes to 1.35.4: -22Sep04 -- Add additional doc. -- Implement automatic POOL_MEM type conversion to char *. Thanks - to Martin Simmons for the suggestion. -- Remove some unneeded function overloading -- need removed by - automatic type conversion. -21Sep04 -- Correct segfault in message.c with debug=200 (new code). -- Fix bug 109 verify with no options prints garbage. -- Add ioctl(MTIOCGET) call to clrerror_dev() in dev.c. As reported - by Frank Kardel, this should clear error conditions on NetBSD. -20Sep04 -- Modify the rescue script to create mount_drives with - the order specified by Philip Nash (mkdir, mount). -- Tweak install chapter of French manual to add new paragraph - from English. -- Tweak restore tree message to be a bit clearer. -- Modify watchdog to wakeup after 60 seconds, or wakeup if - there is work to do. -- Modify watchdog stop routine to "ping" watchdog so that it - stops immediately rather than after sleep time. -- Fix btape to use new dcr blocks rather than its own. -- Fix butil.c to correctly handle Volume names for the - utility routines (broke when updating to dcrs). -11-19Sep04 (vacation) -- Implement multiple Storage specifications in the Job resource - (AND) each containing multiple specifications (OR). Not yet functional. - Note, this needs more work as most things now use - job->storage[0]->first() rather than looping through devices. -- Implement "Multiple connections = yes/no" in Catalog record for - allowing multiple simultaneous connections to the database. -- Add new mac.c (Migrate, Archive, Copy) to dird -- not yet implemented. -- Implement a new POOL_MEM class that automatically allocates - and deallocates a pool buffer. -- Overload a number of utility routines to permit using both - POOLMEM and POOL_MEM. -- Start converting to using POOL_MEM. -- There were a number of Bacula console ACL checks missing in - ua_run.c. It allowed users to run jobs they really should not. -- Correct a number of dates on the Copyright. -- Overload pm_strcpy() and pm_strcat() to handle new POOL_MEM - class. -- Overload bash/unbash_spaces to handle new POOL_MEM class. -- Make a *MASSIVE* pass through the Storage daemon eliminating - all use of jcr->VolumeName and jcr->VolCatInfo in favor of - dcr->... -- Eliminate all all redundant arguments from calling sequences - in SD. This poses a number of problems due to the old way blocks - and records were allocated and released all the time. They are - now contained in the dcr. The problem is that old habits die hard - and there are still places where everything is not right. -- Implement "Block positioning = yes/no" in Device resource in SD. - -Changes to 1.35.3: -09Sep04 -- Add "Multiple Connections = yes/no" in catalog record. Only - the variable is implemented, no code yet. -- Close *all* FD unless debug on. -08Sep04 -- Add first cut of UTF-8 support to conio. It "seems" to be working - pretty well. Moving by words will definitely not work though. -- Improve detection and setting of gateway in the - network_start script. -07Sep04 -- Modify scan code so that in most places scanning will - continue across the end of a line. -05Sep04 -- Begin major phase of 1.35 documentation. -- All outstanding bugs are fixed. -- Implement changes and improvements to rescue scripts as - proposed by Gaurav. -05Sep04 -- Add correction to Phil's previous patch. -- Send all queued messages in SD and FD prior to closing down - the job. -- Send queued messages in Jobs before terminating the job - so that the messages print before the job report. -- Add a destructor so that the Console ACLs are properly - freed. -04Sep04 -- Implement isolinux boot disk. -- Integrate Phil Stracchino's code (thanks for Matt's help). - It permits lists and ranges of jobids on the delete as in: - delete job jobid=1,3,5,11-16 -03Sep04 -- Apply Mike Acar's suggestion when looking for the next volume - to check purged volumes for recycling before doing a purge. -- Make some improvements to CDROM disk. -- Take another crack at ignoring drive open() errors during - polling. -02Sep04 -- Add eliminate orphaned job records; eliminate admin records, - and eliminate restore records to dbcheck. -- replace sprintf by bsnprintf() in dbcheck. -- Added scan target to makefile in rescue cd to print scsi - devices. -- Added argument to berrno::strerror() to pass errno. -- Cleaned up a few more old strerror() calls and eliminated a - few of the now unnecessary set_errno() calls. -- Fixed a bug in the polling code that prevented more than 100 - label reads (insanity check disabled if polling). -- Ignore bad return from open_device() if polling. -- Short circuit code if fatal error return from read_label() in - mount.c -01Sep04 -- Add index file to JobId field of File records for PostgreSQL. -- Correct several bugs in the job queue scheduler concerning - rescheduled jobs: 1. The SD status was not cleared causing a - wrong status to be displayed by Dir after rescheduling. 2. All - rescheduled jobs became zombies because the jcr use_count was - not decremented properly. -- Make the Catalog resource required in Client records. -- Order the listing of where a file is (item 2 on the restore - menu) by StartTime. -- Clarify when a filename only and a full path + filename must - be entered in items 2 and 8 of the restore menu. -- Fix logic error in resolution of names on IPv4 systems. - -Changes to 1.35.2 released 01Sep04: -30Aug04 -- Inhibit printing of FileSet for a restore as it is misleading. -- Cleaned up a number of minor scripting problems with the CDROM - creation. -- Fixed a race condition causing a Director crash on termination, - if a large number of SIGHUPs were sent during a multiple concurrent - set of backups. -28Aug04 -- Completed integration of Rescue CD scripts with Bacula source. -28Aug04 -- Added Ignore FileSet Changes = yes -- Added more error checking to the spooling code. -24Aug04 -- Applied a patch from Peter Eriksson that removes a dynamic stack - allocation (replaced by alloca) and fixes some const problems. -- Fixed a free() of a static variable in the new IP code bnet.c -- Got the new Bacula Rescue CDROM booting. -- Replaced a dynamic template by a simple store when using the - native C compiler. -- Reworked some of the block.c error handling. -- Changed a Dmsgx(000, to Dmsgx(100 in dev.c that was dumping - debug output on a user. -- Integrated patch from 1.34.6 block.c to 1.35 -17Aug04 -- Fix conio.c problem on Solaris. -- Add debug code to lock_jcr_chain(). -- Lock jcr chain around less code. -- Implement call by reference for Mmsg() and pm_strxxx() to - simplify calls. -- New IP address specification is used as follows: - [sdaddresses|diraddresses|fdaddresses] = { [[ip|ipv4|ipv6] = { - [[addr|port] = [^ ]+[\n;]+] }] } - - so it could look for example like this: - SDaddresses = { ip = { - addr = 1.2.3.4; port = 1205; } - ipv4 = { - addr = 1.2.3.4; port = http; } - ipv6 = { - addr = 1.2.3.4; - port = 1205; - } - ip = { - addr = 1.2.3.4 - port = 1205 - } - ip = { - addr = 1.2.3.4 - } - ip = { - addr = 2001:220:222::2 - } - ip = { - addr = bluedot.thun.net - } - } - as a consequence, you can now specify multiple IP addresses and - ports to be used. In the case of a server, it will listen on - all those that you specify. In the case of connecting to the server, - Bacula will attempt connecting to one at a time until it succeeds. - And, in a few other special cases, Bacula will use only the first - address specified. - - The default port numbers are still the same and the services and hosts - are also resolved by name. So now you could use the real names for the - port numbers. - -Changes to 1.35.1: -14Aug04 -- Print error message if Alert Command fails in bpipe_open(). -- Doc Alert command. -- Eliminate unnecessary class in findlib/attribs.c -- Add necessary empty files to new tray-monitor directory. -13Aug04 -- Implement Class with template in findlib/attribs.c to do casting - of uint64_t into stat packet types to avoid compiler warnings. - Thanks to Meno for this idea. -- Make some modifications to satisfy VC++. -- Apply Martin Simmons' second patch to compat.cpp to fix the line - I previously missed. -- Apply Meno's fix to bnet that corrects use of ipaddr after free_addresses, - back out my kludges, and it works. -- Modified configure.in to by default add -Wall. -12Aug04 -- Found some problems with printing IP addresses -- will notify Meno. -- Added printing Pool to Job report. -- Fixed several places where dlists were not being released - (term_job_server, ...) -- Started implementing New() for dlists. Spent a lot of time, - but could not get it to work. -- Fixed a mutex deadlock between the job queue scheduler and the - watchdog. -- Made add_address() static. -- Added bsnprintf to address_conf.c -10Aug04 -- Apply Marin Simmons patch to inet_aton() in compat. -06Aug04 -- Build on Win32 -- required a few changes because of new IP code. -- Implement program reader code in Dir and FD -- not tested, and - a few corrections for writer code are needed in FD. -- Rework SQL for pruning. Add Admin pruning. Prune failed - jobs in Verify and Restore. -- Don't put commas in listing produced in restore so that users - can cut and past JobIds without having commas in the way. -- Change size_t to socklen_t in filed.c -- reindent a bit. -- Remove addr_list->size from buf size definition in bnet.c -- Create a Developer's document. -- Add prompt for Update volume from pool and update all - Volumes from pool. -05Aug04 -- Implement user friendly time duration input editing. -- Add buf len argument to edit_utime(). -- Added eliminate orphaned Client records to dbcheck. -04Aug04 -- Implement Alert Command in SD Device conf. -- Fix updating a Volume from the pool record -- it never changed - anything. -- Implement updating all Volumes from pool record. -- Add patch by Denis Shaposhnikov that fixes excludes of directories - in new style FileSets. -03Aug04 -- Merge Meno's IPv6-1 code. -- Update License to terminate rights of anyone suing a GPL licensor. -- Add Pruning doc sent by Bryce Denney -- Correct inconsistencies in restore command doc pointed out by user. -- Don't edit commas in SQL intergers if they are not stricly integer. -30Jul04 -- Update all pools in all DBs when starting the Director. -28Jul04 -- Implement final cut of berrno and update Win32 code. -- Update copyright to include a termination clause. Add copyright to - binaries. -- Implement .backups client=xxx for Nicolas. -27Jul04 -- Make first cut at implementing berrno class to handle Unix, Win32 - and bpipe errors. Bpipe still needs to be implemented. - This fixes (not yet tested) the Win32 errno problems in the compat lib. -- Fix btape compile problem reported by Martin Simmons -- thanks. -- Add ./configure detection of sys/tape.h -26Jul04 -- Apply two fixes to recent changes to dev.c submitted by - Martin Simmons. -24Jul04 -- Add checks in btape for correct size of off_t, and correct editing - of 32 and 64 bit values. -- Move supported OS/hardware into a chapter by itself. -- Fix bscan, which did not handle walking dcr list. -- Remove old attach_jcr_to_device() code. -- Fix config from Andy Wettstein's patch to use bitypes.h and detect - uint32_t, ... definitions. -- Fix a few compiler warnings because of casting pointers to int and - vise versa. -- Do some minor cosmetics to query.sql. nothing changed. -- Don't call stop_thread_timer() in backup.c if timer not started. -- Fix bug with out of order JobIds on restore. -- Make watchdog examine queues once every 10 seconds instead of once - a second. -22Jul04 -- Add more bools to dev.c -- Fix walking attached DCRs in bscan.c -21Jul04 -- Doc updates -- Start work on rescue files. Integrated RAID changes. -- Print a message when query.sql moved to query.sql.old during install. -- Move setting of FreeBSD chflags() to after utime() to avoid error - messages is immutable bit is set. -18Jul04 -- Turn off heartbeat in FD when -s is given so that we can - debug without a flood of signals. -- Close and reopen the device during an append test in - btape. This better tests appending as if Bacula stops/restarts. -- Remove old attach/detach_jcr_to_device() code -- Add new attached_dcrs code. -- Remove unnecessary subroutine for bsnprintf. -- Replace sprintf() by home-grown code in edit_uint64 ... -- Begin implementation of dev->attached_dcrs. -17Jul04 -- Remove scripts/fd.in from configure.in -- Add printing of JobId when a Job is started from the console. -16Jul04 -- Remove fd/fd.in from scripts directory. -- Fix a number of bugs in dbcheck concerning the -c option - (i.e. with a config file). -- Made RH start scripts use -u and -g options. -- Many more DCR changes. -- Add job message indicating that the job has been rescheduled - and when. -- Fix job end time so that it is always updated. Previously it - was not updated when a job was rescheduled. -- Correct SQL for restoring job by path/name. It could sometimes - pickup the wrong JobId -- submitted by a user. -- Add a number of "%s" in editing database errors -- security issue. -- Ensure that the NumVols is incremented and decremented in the - pool record when Volumes are created or deleted. -- Cleanup error handling when labeling a tape. If vol was read-only, - the device would still be marked as having found a label. -09Jul04 -- Put ftCreationTime into st_ctime of stat packet. Hopefully - this will fix the problem of noticing files have been moved - into the save path after a Full save. -- Fix bug in "status dir" where not all entries are listed. -- Cleanup some improper result printing in configure. -- Optimize a couple of insertions in binary_insert of dlists. - -Release 1.35.0 08 July 2004: -08Jul04 -- Apply Christopher Hull's const patch for PostgreSQL -- Add code to block.c to detect if block header is destroyed. -- Add debug code for memset checking for zeroing 1900-3000 bytes - which is what happened to the block headers. -- If block header is destroyed, read the next block. Probably - should return with new status similar to the SHORT block - return. -- Add more debug info to bls for bad blocks. -- More implementation of DCRs. -07Jul04 -- Eliminate argument passing in SD by using dcr. -- More int->bool conversions. -- Add file:block to a number of read/write error messages. -04Jul04 -- More int -> bool conversions. -- Modify the SD piece by piece to use DCRs everywhere. -- Cleanup some printout for query command. -- Fix typo in cats/mysql.c -- Work on cleaning up tape driver a bit (use bools, better calling - sequences). -- Attempt to fix multi-Volume disk backup. Needs to be tested. -01Jul04 -- Add Regular expressions to FileSet options. -- Correct configure.in to use ${MAKE} for doing the dependencies. -- Make MySQL and PostgreSQL try for 30 seconds to connect before - giving up. -- Correct Gnome 1.4 Makefile to build without cats library. -- Correct a crash reported (with patch) by Jonathan Soong - when attempting to backup an ACL on a symlinked file. -27Jun04 -- Fixed an off by one bug in the new resources pointer code. - res_head array was one too small. -- Added Errors to last_job list. This allows detecting jobs - that terminated in a warning. -- Implement setting the Win32 icon to yellow instead of red - when the job terminated OK but with warnings. -- Fix the Win32 makefile and VC project file. The links were - not including the Win32 dlls. -- Delete some old Win32 code that was turned off. -- Eliminate a few more Win32 compiler warnings. -- Reduce the output produced by NIS (Win32 install builder). -- Simplify some of the #ifdefing in compat.h -26Jun04 -- Rewrite spooling error handling when I/O error occurs. It is - a bit tricky, requiring to truncate the file so that a despooling - will work correctly. Needs to be tested. -- Make better subroutines for setting up for a new job. -- Start putting all DB ids on #defines (going to 64 bits). -- Fix gnome-console Makefile.in to work again. -- All "level=Incremental/Decremental" to the estimate command. This - required some re-arrangement of subroutines at a fairly low level. -25Jun04 -- Apply Piotr Jaworski's patch (patch-r-status.diff) to update the - catalog status when a backup job starts running. -24Jun04 -- Add (char*) cast to readline call in console.c for old readlines. -- Copy Makefile.in from gnome2-console to gnome-console (to eliminate - need for cats library). -- Modify spooling code to handle write error (e.g. spooling disk full) - more gracefully. Previously despooling would fail. -22Jun04 -- Reduce casting in smartall.c a bit and add counters for - bytes, max_bytes, buffers and max_buffers. -- Fixed reload algorithm to stack both job end callback and the - table id. -- Fixed the orphaned buffer after reload (job_end_push had to be - destroyed. -- Destroy cond var (jcr->term_wait) only if initialized. -21Jun04 -- Sort the Scheduled Jobs list by start-time, priority. -- Implement resources on a pointer. -- Fix Gnome console crash on up/down arrow with no history. -19Jun04 -- Finish first cut of SIGHUP code. To make really work need res - on a single pointer rather than in fixed memory. -- Fix a number of places in query.sql where multiple JobIds are - printed (due to JobMedia records). -- Add new query: List jobs on Volume given Volume name. -- Correct socket close on Win32 in bnet.c (in addition to compat.cpp). - Caused fd leak in Win32 for each connection. -- Remove vol labeled test in askdir update_volume_info so that non-labeled - Volume in catalog can be marked in error. -- Close socket in SD when connection rejected. Caused fd leaks. -- Initialize job_start_wait cond variable after every new_jcr() otherwise - NetBSD gets error in library when trying to delete it without being inited. -- Fix typo (9 instead of 0) return status in write_new_volume_label. -- Fix mount.c to call routine that correctly marks a volume in error. -- Move code to rewrite volume label to subroutine -- a bit cleaner. -18Jun04 -- Finish implementation and testing of new restore tree code. -- Implement feedback while tree is loading. -- Eliminate printing INFO message in UpdateDB (cats) -- it generates - "false" error messages. -- Eliminate some GTK error messages when running the Gnome2 console. -16Jun04 -- Begin restructuring tree.c for inclusion of the binary_insert() - routine. -- Apply Peter Eriksson's lib file order changes in linking for IRIX. -- Abort configure if Internal is selected as the database. -- Add testimonials to the Web page -- Add the bugs list to the Web page "lists". -- Clarify the English in SuSE and Slackware when SD not running. -15Jun04 -- Applied another extern "C" patch from Peter Eriksson. -- Fixed a bunch of VC warning messages. -- Applied the patches sent by Andreas Jellinghaus: build Gnome and - wx-console in client-only build if configured; add ./configure option - to permit setting of sbin modes -- default is 0745 as before; remove - cats library from Gnome console build; remove old version from Gnome - About box. Thanks Andreas. -14Jun04 -- Applied Peter Eriksson's const changes to the source code. Thanks Peter. -- Implemented a binary_insert() method for dlists -- intended to be used - in the restore tree routines. -- Turned on my bsscanf() code, which replaces sscanf() by my routines, which - are a subset of sscanf() used by Bacula, but which have known 32/64 bit - behavior rather than vendor dependent !@#$%*. - -2004-07-30 Version 1.34.6 28Jul04 Release -28Jul04 -- Fix a restore bug where the backups could be - applied out of proper order possibly restoring an old version - of a modified file. -- Fix for restore selection of a file by name, where it was - possible to select a file from the wrong Client. -- Fix segmentation fault during backup of a symbolic link - with ACLs turned on. -- Fix a minor compile error in wx-console. -- Fix a bug in despooling when the spooling disk partition becomes - totally filed or gets I/O errors. -- Fix a memory leak in PostgreSQL, and make Bacula retry 5 times if - connecting to the DB fails. -- Retry 5 times if connect to MySQL failes. -- Fix linking the gnome-console - -2004-06-22 Version 1.34.5 21Jun04 Release -21Jun04 -- Fixed Gnome crash on up/down arrow with no history. -- Fixed btape "fill" crash with multiple tape option. -19Jun04 -- Fix a number of places in query.sql where multiple JobIds are - printed (due to JobMedia records). -- Add new query: List jobs on Volume given Volume name. -- Correct socket close on Win32 in bnet.c (in addition to compat.cpp). - Caused fd leak in Win32 for each connection. -- Remove vol labeled test in askdir update_volume_info so that non-labeled - Volume in catalog can be marked in error. -- Close socket in SD when connection rejected. Caused fd leaks. -- Initialize job_start_wait cond variable after every new_jcr() otherwise - NetBSD gets error in library when trying to delete it without being inited. -- Fix typo (9 instead of 0) return status in write_new_volume_label. -- Fix mount.c to call routine that correctly marks a volume in error. -18Jun04 -- Eliminate printing INFO message in UpdateDB (cats) -- it generates - "false" error messages. -- Eliminate some GTK error messages when running the Gnome2 console. -16Jun04 -- Apply Peter Eriksson's lib file order changes in linking for IRIX. -- Abort configure if Internal is selected as the database. -- Add testimonials to the Web page -- Add the bugs list to the Web page "lists". -- Clarify the English in SuSE and Slackware when SD not running. -15Jun04 -- Applied the patches sent by Andreas Jellinghaus: build Gnome and - wx-console in client-only build if configured; add ./configure option - to permit setting of sbin modes -- default is 0745 as before; remove - cats library from Gnome console build; remove old version from Gnome - About box. Thanks Andreas. - -2004-06-09 Version 1.34.3 09Jun04 Release -12Jun04 -- Enhance regression scripts. -- Apply Tim Oberfoell's ACL patch. -11Jun04 -- Implement bsscanf() because sscanf on FreeBSD amd64 stores - in 64 bit words for %ld. Turned on for the moment only for - FreeBSD amd64. -- Fix all conversions of ptr to int to use (long unsigned) this - works on i386 and amd64. -- Add mtimeonly and keepatime to new Options list -- omitted before. -- Add a bit more authentication debug code. -- Start variable name/overload cleanup in SD -- Fix sscanf() in askdir.c scanning into bool to use local int. -- Make max_spool_size int to allow proper arithmetic. -- Remove trailing junk on sscanf() of "Hello Start Job" in SD. -- Make ask_sysop_to_mount_volume() always ask sysop. -- In SD mount.c, if get I/O error or read label error on non-removable - Volume, mark the volume in error and retry. -- In SD mount.c, if non-removable volume, never ask sysop to mount. We - ask sysop if there are no appendable Volumes though. -- The above 3 items fix the looping error Bacula would get if the - Volume was in the catalog but didn't exist -- or was zero bytes - long. -10Jun04 -- Implement | and < in FD for new FileSet files. -- Implement simplistic attribute spooling statistics in status. -- Make storage=xxx on restore override the restore default. -- Fix an uninitialized stack variable in append.c that caused data - corruption on amd64 machines and *could* cause the same on other - machines. -- Fix a seg fault in automatic tape labeling. -- Eliminate a PoolId=nn when zeroing the InChanger flag for a Volume. -- Add a bit more debug info to bls.c -- Clear InChanger flag during "update barcodes" if no VolName present, - i.e. no Volume in Changer. -- An update pulled in Christopher Hull's fixes to the client program - execution on Win32 to search the path and use COMSPEC. New rules - apply! -- Fix UpdateDB to complain if mum_rows < 1 rather than != 1. - - -2004-06-09 Version 1.34.3 09Jun04 Release -09Jun04 -- Add missing FT codes in new FileSet callback, which caused error - return on unchanged directories. -08Jun04 -- Fix "update volumes" move from one pool to another. -- Change default search location for PostgreSQL -- thanks - to Hans-Ulrich Schaefer. -06Jun04 -- Zero Slot if not autochanger in stored/mount.c -- As a last ditch effort to mount the next tape in mount.c, zero slot - and ask sysop. -- Win32 status was picking up the first status in the list job terminated - jobs instead of the last. -05Jun04 -- Add additional fields to llist pools -- Correct some minor label scan problems with update slots -- Ensure correct Pool is used with tape cleaning prefixes. -- Eliminate false error message in update slots (slots taken as - Storage device). -02Jun04 -- Print "Unimplemented" message if user does reload command in Console. -- Add DISTINCT to Volumes for restore in query message (user supplied fix). -- Fix crash in btape during read after fill -- important bug. -- Turn config parse ABORTs into ERROR_TERM in Storage daemon. -- Add dbcheck enhancements submitted by Mano Abels and - Jose Luis Tallon. -- Update autoconf files to latest version. -01Jun04 -- Modify jobq scheduler to require exclusive use of the Storage device - before starting it. -31May04 -- Eliminate a few compiler warnings on Win32 -- Change Win32 to use btimers instead of timers. -- Remove two returns in void subroutines in wxbconfigpanel.cpp -30May04 -- Apply Christopher Hull's check for error return from open_bpipe() - in filed/job.c -- Be sure to clear *all* bits in hourly when an hour is given. -- Apply a user fix to query.sql -- Check status code returned from _open_osfhandle in compat -28May04 -- Apply Peter Eriksson's bug fixes. -- Add Alpha (tru64) submitted by Scott Bailey. -- Update manual -- Add new Autochanger to list supported -- Cleanup src dir better after glade trashes it with junk -- Make another attempt to get hourly, daily, ... keywords working - intuitively and correctly. -- Prevent seg fault when no job name specified on "status job" -- Rename timers.h/.c in lib to prevent conflict on some machines -- Trap NULL DCR in block.c -- Add additional info to failed btape test pointing user to manual. -- Undefine DCR, which is defined on some stupid systems. -- Fix stored/dircmd.c not to quote Volume name on label query so that - "update slots scan" works right (the quotes confused it). -- Fix autochanger.c not to attempt to unload a slot if the prior loaded - request returned -1. -01May04 -- In testing for Mike Acar's problem. I *finally* found and nailed - the mount command that did not release a waiting job. The return - of a stolen lock forgot to broadcast. -- In examining Mike Acar's problems, it appears that the Bacula - block size is not always set to a multiple of 1024. I've modified - block.c to do so. -30Apr04 -- Add Excludes to new FileSet handling. -- Fix bsmtp.c to correspond to RFC-2821 by removing extra spaces. -29Apr04 -- Implement new style FileSets in both the Director and in the - File daemon. No filters yet. Both old and new styles work. -28Apr04 -- Apply the fixes Chris Hanson sent for mtx-changer and for detecting - PostgreSQL on debian. -- Rework File Options document -- Re-begin work on File Options. -- Add define for nl_langinfo in configure -- Add additional tape drives sent by Jesse. -27Apr04 -- Modify syslog in win32/compat to throw up a MessageBox(). -- Inhibit sending daemon messages to stdout if Win32 is set. -- PostgreSQL performance updates from Volker Goetz -- DB script updates suggested by Dan -- Doc updates - - -2004-04-26 Version 1.34.2 24Apr04 Release -24Apr04 -- Get production build on Win32 of wx-console working -- mostly a problem - of getting the paths right and installing and building wxWidgets. -23Apr04 -- Make SD utility programs accept device name as well as archive device - on command line. -- Update docs -22Apr04 -- Fix one off bug in StartBlock in bscan -- thanks to Gregory Brauer for - reporting this. -- Remove old debug code from Win32 FD. - -2004-04-20 Version 1.34.1 20Apr04 Release -18Apr04 -- Found and fixed SD crash during restore. -- Added FreeBSD Bare Metal Recovery documentation by Alex Torres - Molina and others. -- Added nice graphics produced by Aristedes Maniatis giving an - overall view of Bacula. -- Changed textdomain to be "bacula" in all progs. -- Fixed a major race condition in the job scheduler when multiple - simultaneous jobs is enabled. This occurred only when on job had - blocked another because of resource usage. This caused a deadlock - and CPU usage. Reported by Michel Meyers. -- Changed the backup report to indicate "Backup OK -- with warnings - if any warning messages were generated. -- Change output of restore report to indicate: - "Restore OK -- warning file count mismatch" -- Make backup report say "Backup OK with warnings" if either FD or SD - report any non-fatal errors. -- Modify bscan to print some elementary statistics (#Jobs, #Files, ...) - added to catalog. -16Apr04 -- Modify bscan to print some elementary statistics (#Jobs, #Files, ...) - added to catalog. -15Apr04 -- Added --enable-wx-console and updated Makefile.in -- Fix mtx-changer so that the calling sequence is compatible - with the previous version (the new one required arguments that - were not necessarily used). -- Document how to use stunnel with Bacula. -13Apr04 -- Fix crash in query command. -- Remove schedule from the default restore job. -- Fix data spooler to use min/max tape blocking factors. -- Automatically turn of conio if library not found instead of bombing. -- Cleaned up a lot of copyright dates. -- Try to keep spool statistics from going negative. -- Integrated wx-console code from Nicolas Boichat. -09Apr04 -- Added new Pools chapter. Doc about using two disks. -- Attempt to keep the spool file statistics size from going - negative. --8Apr04 -- Fix the Director's Scheduled Jobs: list to have a === - termination. -- Fixed ./configure to disable readline rather than stop if - readline.h is not found -- Fixed a typo in the SQLite database update script as reported - by Robert J. Clark - thanks. -07Apr04 -- Removed src/win32/pthreads and src/win32/zlib from the source - tree. -- Created a new depkgs-win32 that has the pthreads and zlib source - code. -- Removed the JobDefs from the default Restore job as it has a - schedule. Thanks to Matt Howard for this. - - -2004-04-06 Version 1.34.0 06Apr04 Release -06Apr04 -- Turn off SIGQUIT in console. -05Apr04 -- A good number of document updates. -- Fixed the order which multiple files are accepted for - inclusion in the restore tree due to the fact that PostgreSQL - returns files in a different order from their insertion. -02Apr04 -- Fix autochanger test in btape. It used old editing routines. -- Fix run_program to return 0 if program runs and no output. -- Add more debug to run_program. -- Make signal debug print signal string. -01Apr04 -- Build console with client-only build. -- Add better error messages to some of the db_xxx routines. -- Apply Christopher Hull's patches for proper Win32 shutdown. -- Eliminate True and False in favor of true and false. -- Put correct thread id in jcr once the correct thread is running. -- Zap head and tail pointers in dlist when everything is removed. -- Rework sm_dump() so that it won't overrun a buffer when editing - and error message. -- Fix watchdog to properly remove entries while walking the - dlist chain. -- Fix termination of last_jobs list by removing broken code. -31Mar04 -- Update dbcheck to fix Paths without a trailing slash and Filenames - with a trailing slash. -30Mar04 -- Add -p option to all SD programs including bacula-sd. It causes - Bacula to proceed or forge on in case of I/O errors. It is unlikely - this will help, and it is strongly recommended against running - the daemon with this option in production. -- Tweaked the Makefile not to create the gnome directories except - when doing a gnome install. -28Mar04 -- Implement Qmsg() queuing of messages to prevent recursion especially - for bnet.c where recursion is fatal. -- Add detection of ncurses if the termcap lib is not found. -- Tweak winabout -- start cleanup. -- Fix dlist again, when list is destroyed, be sure to null head and - tail pointers. -27Mar04 -- Make the default for restore to have nothing marked. -- The "all" keyword on the restore command marks everything by - default. -- The "done" keyword on the restore command prevents user interaction - with the tree routines -- used mainly for scripting (regression ...). -- Correct a bug in the last_sibling code. -- Add alphabetic sorting of siblings so the "dir" and "ls" commands - during restore show files in alphabetic order. -25Mar04 -- Based on Mike Acar's suggestions rework tree insert routines. Improve - performance by using a last_sibling link for inserts. -24Mar04 -- Apply corrected SQL to sql_get.c supplied by Dan Langille. -- Implement "delete job jobid=xxx jobid=yyy ..." -- Implement "purge volume=xxx volume=yyy ..." -- Fix buffer overrun in query string substitution. -22Mar04 -- Fix bad format %s instead of %d for editing new slot in update volume. - Reported by Vadim Zotov. -- Better error diagnostics in ./configure for detecting termcap library. -20Mar04 -- Restore old sql.c split_path and file name since it seems to have - broken the Verify stuff. -19Mar04 -- Hunt down missing free_locked_jcr() in SD that caused zombies. -- Modify status outputs to be more consistent for zombie checking. -- Add tests to regression script for zombie jobs. -- Set EIO in dev_errno for all error returns when bad data found. This - fixes ERR=Success messages. -- Make error messages all contain ERROR for easy regression testing. -- Add sanity check in DIR for VolFiles becoming smaller. -18Mar04 -- Second cut GTK+ restore GUI. Ready for testing but much more to do. -- Phil reported an sql path length=0 message. This broke saves of - / -- fixed in scan.c -- Fixed seg fault in btape "test" due to missing allocation of dcr. -- Tweaked some btape messages. -- Sort Volume names in Job report according to the order they were - written -- user request. -17Mar04 -- First cut GTK+ restore GUI. -- Applied bsmtp patch supplied by a user. Thanks. -- Made a new split_path_and_filename() subroutine -- in lib/scan.c -15Mar04 -- Fix "typos" in RedHat install-autostart Makefile.in -13Mar04 -- Added two tar files that Phil sent for adding slackware support. - Thanks Phil and Matt Howard. -- Fix relabel command -- || should have been &&. -- Correct once more the scheduling algorithm -- this time it should - be much better. -12Mar04 -- Implement simple spool statistics printed by "status sd". -- Cleanup/add spool error messages. -- On multiple ctl-c, exit from console quickly. -- Implement code to select a different Volume in the SD if the - current Volume is busy -- requested by Patrick Cole. -- Change postgreSQL make tables to use bigint instead of integer - for StartBlock and EndBlock because - there is no unsigned integer in postgreSQL and these fields use 32 bits. -- Implement multiple drive autochanger support -- prompted by email of - Patrick Cole. -11Mar04 -- Update version and date in Win32 build. -- Fix bug in run_conf with month range zapping wday and wom. -- Correct editing of port for PQsetdbLogin in postgresql.c as reported - by J. Conroy, and do a second try. -10Mar04 -- Integrate Phil's Makefile patch. -- Add SpoolDirectory to SD Device resource. -- Add MaximumJobSpoolSize to SD Device resource. -- Add MaximumSpoolSize to SD Device resource. -- Implement the above. -- Make despooling lock the device so only it writes - to the device during despooling. -09Mar04 -- Data spooling now passes the regression tests. -- Added "Files Expected" to the restore job report. -- Implemented SpoolData = yes/no in the Job resource -- Implemented SpoolData = yes/no in the Run overrides. -- Note, you must have a 1.33.4-09Mar05 SD or later with the Director since - the DIR->SD protocol has changed to support data spooling. -- Remove the confusing "Which DBMS do you want to use (please select only one):" - messages from ./configure. -- Fix broken Jmsg with missing argument in find_one.c -08Mar04 -- Second cut data spooling code. -- Fix missing piece of yesterday's patch. -07Mar04 -- Integrate patches supplied by Jason Conroy that fix Slot numbers - getting lost. -06Mar04 -- This version contains a *major* addition to the SD structures. - Many variables have been moved out of the JCR into a new DCR - (Device Context Record). This required quite a few changes, and - introduced a bit of instability. In the end, after a few more - rounds of changes, the DCR will replace virtually all arguments - to the low level SD read/write routines. This change permits - (with a bit more code) the SD to write to multiple devices at - the same time for a single Job. It also facilitates adding the - data spooling code. -- Added a patch that fixed the port specification for postgresql. -- Fixed findlib/find_one.c so that it will complain about backing - up a hard linked file twice, which makes a restore impossible. -- Tighten up permissions on pid file. -- Attempt to avoid warnings when casting 64 bit pointers to an - integer. -- Added skeleton code for data spooling. -- Make sure spooled attributes are discarded on error. -03Mar04 -- Updated getdiskinfo in rescue/linux to handle the fact that the - sfdisk -s option now includes info on partitions. Also, before - creating the diskinfo files, clean out the old ones. -02Mar04 -- Add debug and error output to jobq.c -- Fix some minor errors in debug output of scheduler.c -- Add "trace on/off" command and modify trace code in message.c - to work off trace flag rather than #defines. -01Mar04 -- If console is found during install warn user (new name is bconsole). -- On install copy console.conf to bconsole.conf if it exists. -- Make RunAfterJob error non-fatal. -- Rework minor details in status output. -- Attempt to define all values for "consoles" in JCR to avoid - confusion. -28Feb04 -- Use net start bacula to start Bacula on WinXP/NT/2K - systems after installation. -- Change a few strcpy()s to bstrncpy()s in signal. -- Add "gui on/off" command to console to turn on gui mode, - which will adapt Bacula better to batch or gui programs. - Currently, it prevents commas from being inserted into - numbers in the list command. -- Tweak some of the Makefiles so that the install is done with - the right program (nothing really changed). -- Install logrotate in the "make autostart" of Bacula on RedHat. -- Implement SIGHUP while jobs are running. It *seems* to work but is - a bit fragile and still crashes if you push it. More work needed. -- Applied Phil's GNOME 1.4 patch. Very clean. Thanks Phil. -- Major updates to the native Win32 installer. -27Feb04 -- Restructure free of conf resources to handle job_end_push() - and SIGHUP. Lots of changes little substance. -26Feb04 -- Add mtimeonly=yes/no and keepatime=yes/no to Include list - 1.33 style. -- Allow no modifier in time and size specifications. -- Attempt to implement disk seeking. More work needed. -- Implement more in win32 installer and test it. -25Feb04 -- Implement kb, mb, and gb modifiers for size, which mean - 1,000 bytes, 1,000,000, ... bytes. -- Add Makefile to src/win32 to allow building the full - release -- it calls nmake where appropriate. -- Remove the rsi directory from win32 as suggested by Christopher -- Add Michel Meyers' nsi file to win32 and integrate it with - the build. -24Feb04 -- Add the frigging _O_BINARY to the right variable. Win32 works! -- Add debug code to state file. There is a problem with Win32 read - returning one byte less than it should. -- Implement a number of new functions for alist so that it has - equivalent functionality to dlist. It will be used for - job_end_push(). -- More work on state file. -- Added a popup message box on Windows if Bacula Aborts. -- Attempt to shutdown the FD server, but doesn't work on Windows. This - would have given a cleaner shutdown, no problem. -23Feb04 -- Update projects -- Attempt to fix state file on Win32 -- no luck. -- Add HPUX tweaks to configure.in -- Update quickstart and install.wml of doc. -- Eliminate extern int h_errno from bnet.c by including netdb.h -- Eliminate NumJobs from last_job structure so that FD and SD - correctly report what is in the state file. -22Feb04 -- Implement daemon state file, and save/restore last_jobs list. -- Fix time routines in win32 compat.cpp -- Fix a bug of not checking the bpipe_open() status in do_shell_expansion(). -21Feb04 -- Add Volker's bacula script to the SuSE directory and convert it - to bacula.in -- Make LockRes() and UnlockRes() use read/write locks and have - debug info to trace locking and unlocking. -- Begin work of implementing SIGHUP. It is now enabled for - the Director and works only if there are no jobs running, - in addition, if the new conf file is incorrect, it will - terminate Bacula. Much more work to be done. I've figured - out a scheme to implement it with running jobs without - adding individual semaphores or use counts. -- Sort "list jobs" by StartTime rather than JobId, which can - be random. -16Feb04 -- Add a lot of "const" to char * arguments to keep the native - Sun compiler happy. -- Added first cut of message queuing to prevent recursion in - low level routines. This code is not yet working. -- Spent a *huge* amount of time looking at the tape driver - code in the wake of several reports of tape labels getting - trashed. The code looks fine. -- Created a tape with an error (by writing a block at the - beginning of a tape that had valid data), and found that - Under Linux there is no way to read past an I/O error. - I tried mt; I tried my own program (btape); and I tried - using scsitape, which talks directly to the scsi driver. - This is *VERY BAD* news. -- I spent an *enormous* amount of time enhancing the btape - test program as well as making the fill command work with - both one and two tapes and the autochanger if configured. - The multiple tape fill test is now quite comprehensive. - It checks the last block on the first tape, the first block - on the second tape, and the last block (11) on the second - tape. -- Teaked the tape driver for several functions to use the - OS driver's notion of mt_file if there is an error. -13Feb04 -- Add DB update scripts retrieved by Scott to a new updatedb - directory at the top level. -- Add -p option to bcopy to allow ignoring errors on input. -- COALESCE(xx,0) does not work on PostgreSQL because the 0 is not a - correct time. Replaced by adding LastWritten IS NULL to the sort - line as was first suggested by JML. -12Feb04 -- Use COALESCE(LastWritten, 0) in sql_find.c to get NULLs to sort last. - See note above. -- Add write/read and positioning test to btape "test" program. -10Feb04 -- Fix bad printf of InChanger flag reported by Pascal Pederiva. -- Fix bad indexing off stack in authenticate.c reported by - Pascal Pederiva. -09Feb04 -- Add \n to hosts.access reject message. -- Implement security message class and make hosts.access message use - that class. -08Feb04 -- Fix check_memory bug in ua_query.c, which gives a bus error on Solaris. - This affected only the query command. -07Feb04 -- Added backup to cdwriter script to examples provided by Johan Decock. -- Fixed a bug where ls really did lsmark (just invert command table - entries). -- Fix bug where a soft linked file and a directory had the same name - by treating the soft link as a directory and putting the entries under - it. This fixes the bug reported by Alexander Mueller. -- Fix a deadlock situation in the new watchdog code where the - watchdog locks its semaphore, and attempts to lock the jcr_chain, - but another thread has locked the jcr_chain and wants to free a - watchdog, which tries to lock the watchdog semaphore -- deadlock! - Used read/write locks to solve the problem. -- Improved the error messages when I/O errors or buffer id errors - are detected, and prevent non-sense errors from being printed. -- Fix some incorrect messages in restore if no name is supplied - on the command line (e.g. pool= ). -- Add the third digit to the release version number. -04Feb04 -- Add -l option to bls that causes it to ignore tape label errors. -03Feb04 -- Correct problems with jobs scheduled at a later time by hand. - Missing unlock(), backward test on pthread_create status. -- Fix setip crash reported by Alan Brown. -- Create bacula.spec.in in SuSE directory from Scott. -- Fix missing unlock() in ua_status on access denial. -- Lots of little cleanups, improving jcr use_count debug printing. -- Add EMSG to mem_pool utilization statistics. -01Feb04 -- New bacula.spec.in file from Scott -- Add Scott's spec file to the platforms/suse directory -- Modify configure.in to make platforms/suse/bacula.spec -- Do not allow a resource name to be specified twice. - -2004-01-30 Version 1.33-30Jan04 Release -30Jan04 -- Apply Jess Guardiani's second fix to list autochanger volumes without - opening the drive (necessary on FreeBSD if no tape is in the drive). -- Added Postgresql configure search libraries recommended by Alan Brown. -29Jan04 -- Reworked the command line handler in restore to walk through the - arguments one at a time. This makes the file= entries work correctly. - Also reworked the code that takes the MediaType and finds a - storage device. -26Jan04 -- I've noticed that the backups of Rufus, my development machine, can be - "stuck" for about 12 hours, then suddenly they run. In running the - debugger, I see that it was stuck on the select() statement waiting - for the Hello. Why this happens I am not sure. I re-organized the code - a bit because it didn't seem to be as robust as it could, but I cannot - explain the problem. -- As a consequence of the above, I have implemented a new bsock timer that - can be started and stopped. This is based on Nic Bellamy's new watchdog - code. The timer is set with start_bsock_timer(bsock, timeout); If the - timeout expires, the bsock will be marked as timed_out and interrupted - with a pthread_kill() on the current thread. -- Added 5 minute bsock timers to all the opening Hello/authentication - exchanges between the various daemons. -24Jan04 -- New spec file from Scott. -- New patch file from Scott for create_sqlite_database -- Fix crash in run command if invalid pool specified on the command line - and then the user cancels the Pool prompt. -- Separate Console and ConsoleFont resources in gnome2 conf files. -- Remove possibly bad ASSERTs from bnet.c -- Remove open() of device in dircmd.c, which fails on FreeBSD with - an autoloader -- thanks to Jesse Guardiani for this fix. -20Jan04 -- Remove all "hostname -s" from configure except for RedHat. Use uname -n instead. -- Implement SetIP command. -- Implement Close On Poll in Device resource on SD. -- Implement Full, Inc, and Diff Pools. -- Implement Access control lists for Consoles. -18Jan04 -- Define default working_dir as /var/bacula/working. -- Implement setip console command to set new IP address for a Client. -17Jan04 -- Implement maximum network buffer size directives. -- Good first cut at access control lists for the console. -- Optimize restore to select only latest Differential backup after - the Full, and then all following Incremental backups. Previously - everything after Full was selected. -16Jan04 -- Organize kernstodo a bit (more to be done). -- Add client IP address to BSOCK structure. -- Use bit fields where appropriate in BSOCK structure. -- Pass UAContext to ua authenticate in Director, and make it - set the appropriate console (or NULL for none). -- Tweak restore "run" argument handling and add "files" keyword. -- Add device name or Volume name to some SD messages. -15Jan04 -- First cut multiple consoles. -14Jan04 -- Update kernstodo -- Add quit command to restore tree handler. -- Make restore tree handler remember if a hard link is present, and - in doing a mark, only get database entry if there is a hard link. - mark commands thus run at least 2 orders of magnitude faster. -- Add files=xxx field to run command submitted for restore. -- Add yes to restore run command if either yes or run is command line - argument. -- Make "yes" on command line argument skip prompt for modification of - run job. -- Add markdir and unmarkdir -- both affect only the directory in - question and do not do a recursive descent. -- Make tree command automatically mark all higher level directories to - be restored when a directory or a file is selected. Such directories - are indicated by preceding the name with a + to indicate that only - the directory entry is selected and not the whole directory tree. -- Modify a few tree commands to walk through all arguments rather than - just taking the first one. -13Jan04 -- Update copyright date on changed files. -- Make mark command in restore tree run *much* faster by accessing database only - if the file actually is hard linked -- determined at time tree it built by - keeping a has_link bit in the tree entry. -12Jan04 -- Modify findlib/makepath.c to create all parent directories with full permissions. - This should solve the access problems on restoring files on Win32 systems. -- Modify restore to report **** Restore Error **** if any error are found. - I.e. a file could not be created. -- Change a few errors into warnings -- e.g. if permissions could not be set, but - the file is actually restored. -11Jan04 -- Replace bsd_queue with dlist in lib/watchdog.c -- Add Date: header to bsmtp. Thanks to Meno Abels (abels) on SourceForge - for reporting this. -- Remove ap==NULL check in src/lib/var.c as suggested by Christoph Barbian - because ap (va_list) is a struct on the Alpha, so the code does not - compile. -10Jan04 -- Implement first cut of polling for a Volume. New Device directive - "Volume Poll Interval = xxx" where xxx is a time specification - (e.g. 5min). Default is off. -- Call pthread_cancel on SD msgchan only if the threadid is non-zero. -07Jan04 -- Change RH autostart scripts to start in Dan's order. - -2004-01-06 Version 1.33-06Jan04 Release -06Jan04 -- Correct calculation of week of month in scheduler and in scheduled - listing. -04Jan04 -- Fix cancel of job waiting on mount to be a bit cleaner. -03Jan04 -- Fix seg fault -- don't close db in db_open_database(). It must explicitly - be called. -- Doc updates -- Allow purge of a single JobId from a Volume (code untested) -- Implement fix to keep SD from looping complaining about the wrong volume - at the end of a tape -- reported by Phil, and fix confirmed by him. I cannot - seem to reproduce the bug here. -- Clean up a few more strcpy()s. -01Jan04 -- Fix configure.in FD User print per Lars. -- Doc update. -- New bacula.spec.in from Scott. Nice! -- Make RunAfterJob non-fatal if it errs since the Job has really - already completed the save. -- Replace sprintf with bsnprintf in message.c -31Dec03 -- Note, this change affects only the Win32 FD. -- Fixed Win32 FD crash due to missing argument in status command. It - always crashed if there was a job that had previously run. Thanks to - Christopher Hull for finding and diagnosing this problem. -29Dec03 -- Fix SELECT as indicated by Dan in sql_get.c for returning Volume names. -- Fix last_jobs list crash for utility programs (btape, ...). -- Correct editing of FileSet name into SQL command. -- Allow calling watchdog stop without initialization for utility programs. -- Enhance btape test by attempting to forward space past the end of the tape. -- Detect CAP_FASTFSF in btape test as possible reason for failure. -- Attempt to prevent infinite loops in fsf_dev() if device not properly - configured. -- Attempt to get correct file number on tape after backspacing at EOM. The - correction should resolve differences in OS tape driver implementations. -- Add ctl-c detection to bconsole. When reading from tty, interrupts any - output from Bacula, when reading from a file, it terminates the reading - and returns possibly exiting if it is a batch job. -- Create devel_bacula.in script and make it configure itself. Very similar - to the new bacula.in. -- Modify bacula.in to have separate file locations for each daemon -- makes - it easier to make a new devel_bacula.in when there are changes. -- Remove old config files when rebuilding configure to avoid error msgs. -- Fix btape "test" to respect TWO EOF. -- Fix fsf_dev() to use system notion of file if it is valid after bsf_dev(). -- Move btraceback.gdb to scripts directory on installl. -- Add new mandrake bacula.spec.in -28Dec03 -- Find commonset of c_iflags that work with FreeBSD tcsetattr on terminals. -- Remove comments from string concatenation -- doesn't work on FreeBSD - compiler. -- Moderately improve bpipe_close() errors. Must rethink status return. -- Eliminate some Emsgs in favor of Jmsgs. -27Dec03 -- Add optional Pool keyword on restore command line. If specified, the pool - used will be restricted to the specified pool. -- "Finish" implementation of JobDefs. -- Fix directory for chmod of cats scripts. -26Dec03 -- Implement foreach_res() #define and start replacing old code. -- Work some more on jobdefs -- more to be done. -- Implement bstrftime_nc() bstrftime with no century. -- Fix static console problem in gnome2 and gnome directories reported by Alan - Brown. -- Add code to test for valid Resource Names. Permitted characters are now - alpha, numeric, colon, period, minus, underscore, space. -- Turnoff some unused code in timers.c -- Start adding code to dev.c to prevent infinite loops if fast forward space - file (MTFSF) is configured on but not properly supported by OS. -24Nov03 -- Sort FileSet selection list by CreateTime. -- Add "lsmark", and "estimate" to tree routines. -- Doing a mark or unmark now prints how many entries were changed. -- Add command argument parsing to btape.c -- Enhance EOT to print file:block on message. -- Add repeat counts on btape bsf, fsf, bsr, fsr, and weof commands. -- Enhance btape's fill command to be much clearer and more reliable. -- Add state file to btape so that unfill command can be done any time - after a fill command. -- Use reposition_dev() to position for read back of last block. -22Nov03 -- Zap InChanger flag only if setting Slot to non-zero. -- Added new SD directive TwoEOF, default off, that tells Bacula whether - to write one or two EOFs for EOM. For the OnStream driver it must - be off, otherwise an empty file will be created. -- Cleaned up the btape "fill" command to compare the last block written - and read rather than just printing them. -21Nov03 -- Implement btape test for autochanger. -- Implement btape test for Fast Forward Space File. -- Moved up to cygwin 1.5.5-1 -- Implemented Fast Forward Space File -20Nov03 -- Add support for selecting volumes from InChanger list first, then - selecting from all available volumes. -- Ensure that Volumes are selected from oldest LastWritten data/time. -- A couple of bug fixes ensuring the proper ordering of volumes. -19Nov03 -- Return oldest LastWritten for find_next_volume. -- Remove ASSERT from stored/acquire.c that could trip when it shouldn't. -- Enhance SD status if debug_level > 1 to show details of dev status. -18Nov03 -- Create update_bacula_tables, ... scripts and modify configure and Makefiles -- Eliminate is_num() and use is_an_integer(). -- Add user slot selection code "slots=1,2-3,5,10, ..." -- Start daemons at level 90 rather than 20 so that MySQL will already - be started. -- Write alter_mysql_tables.in and alter_sqlite_tables.in -- Add Drive and InChanger to Media record. -- Update database level to 7. -- Add db_make_inchanger_unique() and call it when creating and updating - the Media record. -- Add Drive and InChanger to database code for Media record. -- Allow changing InChanger flag in update command. -- First cut at allowing the user to specify slots for updating autochanger. -- Add scan to "update slots scan". -- Add command in SD to readlabel. -15Nov03 -- In the bacula start/stop script, ordered the stop: FD SD Dir to - give the SD the best chances of updating the catalog before dying. -- Add Drive and InChanger to MEDIA_DBR record and to Volume update - from the SD. -- Reorganize the Volume info update from SD so that the Dir sends back the - current information in case the Volume status has changed by expiring. - The DIR-SD protocol is not backward compatible (must update). -- Fixed the signal handler to pass the signal to the exit_handler() - previously it passed 1. -- Modified SD so that on normal shutdown, it walks through all jcrs and - cancels them so that the Volume status will be updated in the catalog. -- Found and fixed a bug where ST_LABEL was not set in append mode - (when a different tape was accepted other than the original one - proposed by the DIR. -- Update the catalog Volume info after dev->file is incremented rather - than waiting for end of job. -12Nov03 -- Change getdomainname() prototype for Darwin. -- Add gethost_strerror() to create correct error message for - gethostbyname(). -- After doing a kill() of a stalled connection in watchdog, turn off - the timer to prevent an infinite loop. -- Allow Bacula to rewrite the label on a disk volume. -- Correct usage report printed by bsmtp. -11Nov03 -- Complete changing references to bsmtp from smtp. -- Add L_NONE for Admin and Restore jobs and update level_to_str() -- Fix segfault from double free of RestoreBootstrap in job.c -10Nov03 -- Change console to bconsole -- Change console.conf to bconsole.conf -- Change smtp to bsmtp -- Implement .bconsolerc -- Check if volume has expired when doing an update media for the SD -09Nov03 -- Implement new code that assures that a non-zero Slot is unique within - a given Pool. When setting a non-zero Slot, the Slot of all other - Volumes with the same Slot is set to zero. Redone later to add - InChanger flag -07Nov03 -- Fix bug reported by Lars where an incorrect Volume name was printed - by the "status dir" command. -06Nov03 -- Pretty up a few error messages printed by smtp. -- Make btime_t int64_t so that one can do arithmetic. -- Implement since as utime (64 bit UTC). -- Compute clock diff between Dir and FD, and adjust since time. -- Apply SQL fix from Nic Bellamy (thanks). -- Apply John's zlib #ifdefing fix. -05Nov03 -- Add Dan's with-sd-user, ... to configure.in. -- Add Dan's userid and group modifications to bacula.in -- Lots of documentation updates. -- Make console print "Enter a period to cancel a command" when starting. -- Fix the "list nextvol" command so that it doesn't try to close the - database twice, giving a segfault. -- Fix (hopefully) to dircmd.c so that a mount request does a pthread_cond_signal. - There was one path were the signal was not sent. This should fix the bug - that requires you to do two "mount" commands to free a job waiting on a mount. -- Make dir_ask_sysop_to_mount_next_volume() return immediately if a slot is - specified. -- Correct some of the messages in testfind.c (pointed out by Dan -- thanks). -- Alias fd to client, sd to storage. -- Changed order of Console commands so that short commands such as q (quit) - are more logical. - -2003-11-03 Version 1.32d 02Nov03 Release -02Nov03 -- Mainly a bug fix release. -- Do a clean of both Gnome directories. -- Require that FileSet id match when finding an Incremental - previous job. This was already the case for a Full. -- Print message if no status returned from FD. -- Correct "Do not forget to mount the drive" message. Test was - backward. -- "status dir" stopped scanning the run records on the first - one that matched giving an incomplete listing. -- Edit commas in Bytes on "estimate" command output. - -2003-10-30 Version 1.32c 30Oct03 Release -29Oct03 -- Add %v to job edit codes. It edits in the VolumeName(s). -- Add code to ensure that fds 0,1, and 2 are defined by dup'ing them - to /dev/null if necessary. Mostly for Windows that does not have them. -- Error check dir_create_jobmedia_record() 2 places in acquire.c -26Oct03 -- More doc fixes. -- Make message buffer longer for a status message that was - truncated. -- Put termination on varargs calls in gnome2-console. -- Scroll only if text sent and not for status update. -- Add all possible Status codes the jobstatus_to_ascii() -25Oct03 -- Add new spec file and cats patch from Scott. -- Optimize tree.c a bit -- turn off debug code, keep node fname - length for fast rejection, add some statistics, allocate - in 100K and 1Meg chunks, use bool, uint16_t and uint8_t to - reduce node packet size. -24Oct03 -- Eliminate ua_retention.c that was not used. -- Improve error message when closing brace missing in conf file. -- More doc updates. -- Eliminate Don't forget to mount if it is a disk file. -- Fix Gnome2 scrolling and blank screen problems. -- Eliminate multiple JobIds in restore selection list. -- Fix non-portable varargs code in var.c -- Make doc fixes/changes suggested by Dan Languille -23Oct03 -- Document new features. -- Implement mod of Verify Job at the run prompt. -- Correct SQL table definitions so that MySQL and SQLite - have all the values in the same position. -- Correct a typo in configure.in when configuring GNOME. -- In doing a "status dir" make it loop over all the run - commands in the Schedule rather than doing on the first one. -- Close all unused file descriptors in bpipe.c otherwise if - a daemon is started, it will keep our TCP/IP port open. -22Oct03 -- Print block read error (checksum, I/O, BB01, ...) once then - the number found at the end of the reading. -- Implement RunAfterFailedJob -- Change db_find_job_start_time() to require a Full save before - running an Incremental or Differential job. -- Remove has_volume_expired from code that updates vol info -21Oct03 -- Implement "delete job" -20Oct03 -- More documentation, add Marc Brueckner's tips to manual. -- Tweak gnome2-console scroll window. -- Turn off some debug info. -18Oct03 -- Modify Verify to accept VerifyJob = xx, where the last backup job - of job xxx will be verified. -- Add changing the Pool name for a Volume to "update volume" -- Write most of the code for Verify Disk to Catalog. -- Recreate the src/gnome2-console directory. -- Change all the text handling code to the Gnome 2.0 way. -- Correct the way verify filenames are returned to the Director so - that directories are in canonical form (i.e. trailing /). -- Handle casting bug in glade-2 by sed'ing support.c in gnome2-console. - -2003-10-15 Version 1.32b 14Oct03 Release -14Oct03 -- Modify configure so that if threaded MySQL client library - is not present, Bacula will link with the non-threaded - version. -- Updates to the Web pages and to the manual. -- Remove trademark symbol from title. Phil pointed out that it - does not display correctly in a title. -11Oct03 -- Implement restore by file before date. -- Change restore arguments a bit so that you can feed it - multiple jobid= specifications or multiple file= specifications. -- Pass restore with run option on to run_cmd. -- Make run-cmd not prompt if it has a "run" on the command line. -10Oct03 -- When pruning, select only old orphanned jobs to delete so that - the current job is not pruned too. -09Oct03 -- Corrected return status for bsf_dev and bsr_dev in block.c and btape.c -- dev.c used incorrect ruturn status for bsf_dev in the BSF at EOM - code. This caused all appends on FreeBSD to fail. -- Turn on fast block rejection code. -08Oct03 -- Optimize file index searches by adding a count to the bootstrap. -- Write single files/blocks to bootstrap without the second part. -- Add current Volume status to the cannot use this Volume message. -- Zero the rx->bsr in ua_restore when freeing so it doesn't get - freed twice. -- Lots of testing on the restore -- I noticed that SD and FD bootstrap files were not always - deleted, so delete them as soon as possible. -- Restore by file (or by selecting files) created some - horrible looking bsr files that defeated the forward - spacing code, so fix write_findex to work right. -- Add zlib_strerror() routine in filed/restore in case - of zlib errors. -- In filed/restore.c make sure all error returns cleanup - and close the open file descriptor. -- Make sure to set *non* over filename in attr packet - after file is found, so error messages that print the - filename don't print an old, incorrect name. -- Allow bclose() to be called after closing the file. -- Fix a number of unclear help messages, ... reported by - Phil in btape. -- Retweak stored/read_record.c so that it does forward - spacing at the beginning of every tape, not just the - first one. -- Print repositioning message if verbose is set. - -2003-10-01 Version 1.32a 03Oct03 Release -04Oct03 -- Combine the code in ua_output and ua_status that searches - the run records. -03Oct03 -- Fixed "list nextvol" to search for the correct pool in the - Schedule Run records. -- Correct an error in is_block_zero. It found a false - match if the first 1016 bytes of a 32K buffer and - the last 248 bytes are zero. Broke the sparse option. -01Oct03 -- More documentation. -- Test if multiple mail addresses works. Yes. -- Add debug Jmsg() to trigger if the file I/O packet is - not closed in the FD, i.e file descriptor leaks. -- When error occurs reading label in mount.c, start from - the very top so that the retry count is in effect. -- Zap the mode in soft links in testls.c for regression - testing. - -2003-10-01 Version 1.32 30Sep03 Release -28Sep03 -- Enhance manual faq, regression ... -- Make FreeBSD read sizes always be a multiple of 512. Needed - to read raw disks. -- Make FreeBSD accept block AND character devices for raw - disk reads. On FreeBSD there are no block devices. -27Sep03 -- Fix printing of EndTime on job report after rescheduling. -- Fix jobq.c error returns to clean up before returning. -- Make Cleaning tape aware of "unlabeled" volumes. -- If a job is rescheduled, ensure that old job is - removed from SD's jcr queue -- i.e. it is still waiting - for FD connection. -- Test rescheduling code. -- Change ./configure to detect Cygwin enviornments. - -2003-09-26 Version 1.32 26Sep03 Beta -- Add regression and GUI-interface chapters to the manual. -- Fix "label" of a volume that is already in the catalog, - but not yet labeled. -- Correct the test for spooling attributes which was backward. - This caused the creation of a spool file in the working - directory for every job run. -- Print to the job output stream when block checksum errors - occur, but continue processing. If more than one occurs, - print number at end of job. -- Remove a few unneeded tests from configure.in -- Modify configure to use -pthread on FreeBSD 4.8, - but nothing on FreeBSD 5.1 -- Clarify that bmicrosleep() takes sec and microsecs -- Apply Franc Carter's code to specify a DB host in - bscan. -- Fix sanity login length test in stored/dircmd.c -- remove old code fro stored/job.c -- Lots of work on regress so that it works on FreeBSD - and Solaris. -- Make the default gnome-console wider (console.c) -- Add \r to the items that terminate a token. - -2003-09-20 Version 1.32 20Sep03 Beta -- Replace a number strcpy() calls with bstrncpy(). -- Added code to ensure that the names for each resource - type are unique. Two resources of different types can - have the same name. -- More documentation -- Added new full length modifiers for time intervals. - Compatible with previous method EXCEPT a modifier is now - manditory. -- Completely restructured recycling. It should work now, but - in any case, the logic is much cleaner. A lot of new - code in next_vol.c -- Added a few pthread_xx_destroy() for items inited. -- Nic Bellamy pointed out that it wasn't necessary to do - destroy() of static initialized pthread variables -- fixed - watchdog. -- update VolStatus asked for the media and volume twice. -- Changed a few more strcpy() to bstrncpy(). -- Made VolBytes=1 as indicator that the Volume is labeled. -- Modified creation of Media record to include VolBytes, - same for sql_update - also set LabelDate if VolBytes = 1. -- Copy any statically linked programs to install directory. -- Change relabel flag to label in Update_media protocol Dir<->SD. -- Change a few strcpy to bstrncpy ... -- Update Media record after an automatic tape label. -- Added more debug code to bnet_server and bnet.c to attempt to - track down Alex's SD segfault (BSOCK==0) -- Add additional debug cod for authentication errors in cram-md5. -- Implement "list nextvol job=xx" and add Volume to Dir status. -- Retry waitpid if interrupted -- needed for FreeBSD! -- Move lex.c debug level to 900 -- Add new aliases SDAddress, ... -- Final changes for variable expansion -- Possible fix to Alex's SD crashes -- Correct incrementing counters not in catalog -- reported by - Chris Allen. -- Correct memory leak in core var.c code -- reported by - Chris Allen. -- Make documentation of variable substitution a bit clearer. -- Apply Nic Bellamy's patch to dbcheck.c to fix SQL to work - on both MySQL and SQLite. -- Finally fixed the .messages that was sent during prompts - in the console with no readline. -- Implement new Include/Exclude semantics. -- Fix a good number of segfaults reported by Chris Allen in - the variable expansion code. -- Print warning message if a job is blocked by user unmount. -- Fix additional variable expansion problem reported by Chris Allen. -- Fix pathconf() error status bug that caused a segfault on - a FreeBSD system -- reported by Gernot Hueber. -- Make sure the console sends ".messages" only when at the - command line prompt. -- Apply a patch from Nic Bellamy that corrects a file descriptor - leak in the Storage deamon when a job is canceled. (Thanks) -- Implement < and | in File daemon. -- Implement ClientRunBeforeJob and ClientRunAfterJob. -- Corrected BSRatEOF to be BSFatEOF in btape -- - reported by Lars Koller. -- Documented BSFatEof -- Eliminated save_level in FD replaced by JobLevel. -- Increased MAX_RES_ITEMS from 35 to 50 to handle - new ClientRunBeforeJob ... -- Add line number in error message for restore from file. -- Correct editing of jobids (misplaced comma). -- Implement restore files. -- Quickie patch to allow Purged Volumes to be mounted. - Must review algorithm. -- Eliminate a duplicated query from query.sql -- Restructure ua_restore.c so that I can add restore files. -- Correct positioning problem at beginning of a second volume - introduced with the new forward spacing code. -- Eliminated a sprintf() in the tree routines. -- Doc updates -- Added HOST_OS, DISTNAME, and DISTVER to the status output. -- Eliminated a few stray Dmsgn(000, messages making them either - debug_level 100, or Pmsg(). -- Made the default "Maximum File Size" 1Gbyte in SD. -- Cache path in tree.c to reduce calls to make_tree_path -- Documentation updates -- Implement forward space file and block when reading a bsr. -- Fixed a bug in db_find_next_volume() where the VolStatus was - not being returned. -- Rework some of the query.sql records that were incomplete. -- Fixed an ambigous SQL statement in restore. -- Fix proper sorting order in restore display last 20 jobs. -- Remove duplicate JobId's in feeding the directory tree. -- Fix an orphaned ua buffer due to a return that should have been - break so that cleanup code executed. -- Changed some strcats and sprintfs int bstrncat() ... to prevent - possible buffer overflows. -- Fix max file size code on tape so that after writing EOF, - an appropriate jobmedia record is created. -- Fix error messages in dev.c, which were copied into lots of - different subroutines without updating the text. -- Add reposition_dev(), and make more of the return statuses of - dev routine standard. -- Eliminate old semaphore and workq code. Keep only new jobq code. -- Try to get a better default size for the gnome-console -- Add code to avoid race conditions in starting/stoping the - heartbeat thread. -- Correct potential race condition in heartbeat_stop(). -- Correct segmentation fault in mysql.c if no password given. -- make pm_strcat and pm_strcpy return the string length -- Use Phil's code to get the unadorned job name. -- Move the MTIOCERRSTAT from just after a write() failure to - after writing the EOF marks on FreeBSD systems. -- Enhance packet too big error in bnet.c and add some - ASSERTs in the send code. -- Set heartbeat interval to zero by default. -- Add Recycle to list of Update Volume parameters. -- Use bget_dirmsg() wherever possible in Director. -- Split next_volume code from catreq.c to next_vol.c -- Consolidate editing job codes into a single routine. -- Add Job resource name -- Remove check for Win32 attributes in bls. It doesn't - need to read them, only print ls -l. -- Add SDConnectTimeout in FD. -- Add Scott's perlgui directory -- Upgrade from RH7.3 to RH9. New autoconf. -- Eliminate gnome2-console directory. -- Correct English in status command. -- Eliminate old shell expansion code and use BPIPE to call shell - with echo command. -- Documentation as usual. -- Add a new bacula.spec for Mandrake -- Add ownership to alist items. Default the list owns the items. -- Make record_cb return a status (preparation for internal use). -- Remove all clearing of remainder in read_record.c -- not necessary -- Write a tapetest program for FreeBSD end of tape testing. -- Modify read.c in Bacula to use read_record.c -- Implement multiple records in read_record.c. One for each session that - is open. Free the record with the EOS_LABEL is found (or at the - end of the scan). - -2003-08-02 Version 1.31a 02Aug03 Released -- Yifang Dai reported a case where he stress tested Bacula and - backed up to four volumes, but only two were selected for the - restore. This is because I forgot that the selection could - span a volume entirely. -- Added a missing CLIENT_FOUND_ROWS to the second attempt to open - the MySQL database -- this prevents UPDATE errors if nothing - actually changed. -- Applied corrections to the manual supplied by Bob Collins. Many thanks! - -2003-07-30 Version 1.31 Beta 30Jul03 -- Integrated Robert Mathews improved description of Priorities into - the manual. -- Chased down the "The data is not valid" bug on WinMe/98/95. -- Found an orphaned buffer in the set_attributs part of WinMe/98/95. -- Add sleep(1) to console when it gets a SIGTSTP signal - to prevent it from using 100% of the CPU. -- Improve description of Priorities. -- Add a bit more documentation to jobq.c -- Complete hash table routine htable.c htable.h -- Change M_INFO to M_ERROR in attribs.c for Windows errors. - -2003-07-23 Version 1.31 Beta 22Jul03 -- Apply a patch from Nic Bellamy that clarifies the error messages - during recycling volumes. -- Documentation. -- Clear VolCatInfo in askdir.c so that readbytes is zeroed. -- Add SD statistics to backup report. -- Removed old workq code. -- Fixed rescheduling after error. -- Fixed delayed starts which were not working. -- Added priority to values that can change when starting - a job. -- Complete implementation of new job scheduler. jobq.h jobq.c - This code is turned off unless specifically enabled in src/version.h -- Integrate code from Nic Bellamy to check for recycled volume in - mount.c in SD. -- Fix a couple of bugs in dlist.c -- Begin implementation of new job scheduler. -- Take serial.h provided by David Craigon, which corrects differences in - prototypes between serial.h and serial.c. -- Make db_get_media_ids() return Media Ids only for the current pool. -- Add new jobq.h and jobq.c drived from workq. -- Add JobPriority to jcr, and Priority to Job resource as well as - to the run line in a Schedule. -- Remove unused pool record from autoprune.c. -- Implement Nic Bellamy's RecycleCurrentVolume. -- Implement RecycleOldestVolume. -- Begin adding new JOB_QUEUE code to the Director. -- Create a single routine recycle_volume(). -- Retry accept(), bind() and socket() if EINTR occurs. -- Implement insert_before(), insert_after(), and empty() for dlist class. - Also require offset to be given by giving item and link address. -- Make error some messages in smtp.c a bit more explicit. - -2003-07-12 Version 1.31 Beta 14Jul03 -- Marc Brueckner reported a crash during restore (a missing tree->) -- Moved host.h.in file from filed to src. -- Update btraceback to include host os, distname, distver in output. -- Split list (in lib) into alist and dlist both with .h and .c. -- Update home page to include Project status page. - -2003-07-12 Version 1.31 Beta 10Jul03 -- Manual updates. -- Clean up some unused variables detected by the IRIX compiler. -- Test two directories on Win32 -- caused a crash. I forgot - to NULL the uid cache pointer after releasing it. -- Use bstrncpy() instead of strcpy() in find_files. -- Clear a few linked lists in the temp directory packed in find_one.c -- Eliminate an unnecessary variable in attr.c -- Clear the cache pointer after release in idcache.c -- Implement a new C++ doubly linked list class. - -2003-07-08 Version 1.31 Beta 08Jul03 -- Update document for Win32 stuff. -- Ensure VolStatus value for update is permitted. -- Fix cached_path so that it is local to the jcr, otherwise, there - are problems from job to job. -- Fixed idcache.c which was not thread safe and didn't release memory, - and didn't always edit the userid correctly. -- Correct missing pool memory allocation in update voluseduration. -- Release mutex in pool_mem.c before triggering ASSERT. -- Lock database while recycling. -- Fix a bug in editing since where I forgot to update to the new size. -- Implement all the command line update arguments. -- Modify label to use volume=xxx for the new volume and oldvolume=yyy - if doing a relable. -- Added yes to run command line arguments. -- Clear errno in editing a string to utime. -- In restore print only volumes that will actually be used. -- Fix bextract -- add appropriate breaks in new case code. -- Add a new test -- bsr-opt-test for testing bsr optimization. As usual, - it pointed out a bug where the directory tree handling code destroyed - the restore arg list. -- Many updates to the manual. -- Pass prefix links flag to FD. -- Sort list of commands for Console -- Set default FD and SD concurrent jobs to 10. -- Rework the find next volume code in catreq.c to correct some minor - but subtle logic errors and to eliminate a goto. -- Did spell check on manual. -- Removed bindtextdomain() as it conflicted with RH8.0 headers -- Fixed parse_args to pass address of POOLMEM struct. -- Constrain FileIndexes written to BSR to be within range of Volume. -- Suppress writing volumes to BSR if they are not actually referenced. -- Make FOPTS use alist for match and base entries. -- Pass prefix_links to SD. -- Add command line interface to most items in "update volume=xxx" -- Add command line interface to restore "jobid", "current", "before", "all". -- Add command line "yes" to run command to supress prompt. -- In new alist code, free only if allocated. -- Overload [] with get() code for alist. -- Fixed the code that wrote FirstIndex and LastIndex to the database. It - was not correct at the end of a volume (basically included indexes in - the second volume). -- Fixed bscan to work with the new code and to properly build JobMedia - records. -- Added code to the read end of block.c to properly track Volume bytes, - blocks, and files. I thought this was not necessary, but it is critical - for bscan to work correctly. -- Modified read_record to properly track First/LastIndex -- needed by - bscan. -- Eliminated some old Volume write code. -- Changed RecycleOldestVolume to PurgeOldestVolume -- Added what I hope are the "final" touches for Win32 stuff. There - are still a lot of annoying little problems. -- Added the "portable=yes/no" option to Include. If set, it disables - use of BackupRead/Write for Win32, so in principle, the data should - be portable. -- Pulled in more recent config.sub and config.guess from /usr/share/libtool -- Replaced the system fgets() by a Bacula version that ignores - interrupts (i.e. signals). This truncated output from child processes. -- Make file_index int32_t everywhere. -- Moved LinkFI into ATTR structure. Also integrated data_stream there too. -- Moved code that sets the stream for writing into create_file. -- Removed a signal(SIG_IGN, SIGCHLD) from dird.c that prevented getting - the status of child processes. This allowed removing the FreeBSD - kludge to bpipe.c -- the status is now obtained correctly. -- Hand scan the stream header that arrives in append.c to avoid machine - dependencies of sscanf(). -- Implemented code to put Data stream in Attributes record. -- Check if data stream is supported, if not, ignore. -- Fix crash when multiple Includes are given (missing parens). -- Clear WroteVol in askdir.c when JobMedia record is created. -- Implement simple array list class for use in Bacula. New files - are lib/list.c lib/list.h. Probably will not use until version 1.32. - -2003-06-24 Version 1.31 Beta 22Jun03 -- Change Purging Oldest Volume message to Recycling Oldest Volume. -- Limit results from find_oldest_volume to one. -- Fix possible buffer overrun in the restore tree handling routines. -- Fixed a crash in VerifyToVolume because I moved the close_db() - down into the free_ua_context() and should not have done so. -- At a "var" command in the Console that does variable expansion and - prints it. -- Implement first cut of estimate command. -- Change find_next_volume() for oldest to use LastWritten instead of - FirstWritten -- also add Append to volumes slected. -- Do normal recycling before checking for RecycleOldestVolume. -- Implemented block rejection on read. This should make restores run - much faster. Next release will have block positioning -- even faster. -- Very preliminary support for Gnome-2.0. Text does not yet work. -- Correct buffer corruption in find_one.c with long directory names (Win32). -- Make setting owner on directories M_ERROR rather than M_WARNING. -- Fix printing of JobId in run listing for restore job. -- Reduce heartbeat read check interval to every 10 seconds on Cygwin because - there is no working pthread_kill(). -- I finally designed a test for multiple simultaneous jobs, - and sure enough it broke when the jobs are split over multiple - volumes. Now fixed and working! -- Eliminated a few "duplicate" error messages by testing for canceled. -- Add ASSERT for device use count going negative. -- Fix BlockNumber checking in stored/read.c (got first one wrong). -- If socket is timed out, do a shutdown(fd,2) instead of close(). -- Fixed return status from SD to FD by setting JobStatus in append_end() -- Add arrays to Environment variables. Elements separated by |. -- Implement Reschedule On Error, Reschedule Interval, Reschedule Times. -- Add a new pool PM_NAME -- gets a name length buffer. -- Implement fast cancel of FD blocked on writing to SD by using - pthread_cancel(). Turned off on Cygwin due to bug. -- Add code to handle EAGAIN in writing (probably not necessary). Use - select(). -- Eliminate size_t from pool control buffers. -- Complete Counter resource. -- Complete LabelFormat (except for WrapCounter) plus counter - inrementation. -- This needs a database change to eliminate PoolId from counters. -- Made a more compact format for the document index. -- Add Phil's checkhost to examples directory (thanks Phil). -- Implement generalized LabelFormat (documentation to come). -- Implement Counter resource. -- Cleanup examples/kernsconfig -- Implement restore to a specific date. -- Fixed a but in automatic labeling (and use durations expiring) analysed - and reported by Rob Proffitt (thanks!). -- Cleaned up a few Cygwin compile problems. -- Made a 10Jun03 release (it is in production here) -- Finally took the big plunge and fixed restoration of links and other - files that have been changed between the backup and restore. Basically - if the file exists, it is deleted, then re-created. -- Purge only Volumes marked Append, Full, Used, or Error. -- Allow pruning of volumes marked Append, in addition to Full and Used. - - -2003-06-10 Version 1.31 Beta 10Jun03 -- Eliminated all plain email addresses and replaced them with " at " in - place of @ to reduce havesting by spammers. Doc + Web Site. -- Started working on making POOLMEM a struct rather than a char. Lots of - work to do. -- Fixed bscan to handle -V option. -- Fixed bscan to handle two File volumes. -- Corrected a misplaced comma it get_fileset() in cats pointed out by bscan. -- Added two Volume bscan test to regression scripts -- write two volumes, - purge and delete everything, bscan the tapes, and do a restore. It works! -- Reorganized the backup/restore code to move the attribute information into - an ATTR packet, which is passed in place of tons of arguments. Moved some - code into lib/attr.c and lib/attr.h. Then eliminated all the duplicate - attribute code. -- Moved FT_ types into baconfig.h. -- Defined FT_ types to use only 16 bits. The upper half of the word is - reserved for adding optional fields in the attributes packet. -- Moved jcr->where into common part of jcr and have it deleted in lib/jcr.c -- Put all attribute reading code on switch() with cases instead of a big - if (restore.c, bls.c, bextract.c, bscan.c, ...) -- set_attributes() now takes ATTR packet, and thus has much fewer args. -- moved print_ls_output() into lib/attr.c -- implemented is_stream_supported(). -- create_file() now takes ATTR packet so has many fewer args. -- add mtime_only code. -- Rewrote bnet.c read and write routines to quit if bsock->terminated is - set. This will allow setting non-blocking writes and then receiving - a termination message and terminating the Job immediately rather than - waiting 2 hours for the line to timeout. -- Put catalog db name in some error messages. -- Code for restore is now much cleaner, with much of it in lib/attr.c, - and it is now common for all readers. -- Add first cut of proper support for Win32 Backup code. -- Fix bug in restore Win95/98/Me. -- Pass mtime_only flag to FD. Needs config record. - -2003-06-04 Version 1.31 Beta 04Jun03 -- Fix block.c to check errno only in case of return status -1 as - suggested by Justin Gibbs (FreeBSD). -- Implemented qfill command in btape for quick testing write/read of a tape. -- Discovered that FreeBSD pthreads re-use the same thread id, which causes - the SD to fail when a user leaves a device unmounted (old pid is reused - and lock_device() thinks the same thread is calling again leading to - inconsistent state). Set id to zero after blocking the device during - unmount. -- A lot of clean up, moving subroutines around for TermCode. -- Free ua->prompt when Job terminates. -- Add AutoPrune and Recycle to values copied from Pool resource - into Pool record on create/updated. -- Implemented bsr for Verify VolumeToCatalog. -- Improved the Verify Job report using SD and FD term codes. -- Split tree handling routines from ua_restore.c to ua_tree.c -- Split bsr routines from ua_restore.c to bsr.c and bsr.h -- Fixed clash between FD and SD returned job values. Report now contains - values from FD. Maybe I should change? or give both. -- Attempt to fix negative use_count for dev packet in SD by adding - a couple of open_dev(). This may be cause of Dan's crash. -- Clear no_wait_id when device is unblocked. This may be cause of Dan's crash. -- Eliminate old "new lock code". -- Add configure of mtx-changer for mtx path. -- Always rewind tape before releasing it (for FreeBSD). -- StartBlock was one too large for second volume. -- Fixed restore to display status from both SD and FD. -- Unified return status message for backup and restore. -- Corrected segmentation fault reported by Dan when doing "label barcodes" - on a File. -- Corrected a segmentation fault when attempting to send a JobMedia record - to the Console -- reported by Dan. -- Added MySQL documentation for using the threaded libraries. -- Added new columns and tables to Catalog database. -- Wrote alter scripts and tested them (thanks to Dan for the help) on - MySQL and SQLite. -- Started using enums where ever possible when passing flags to - subroutines. This helps make the source much more readable. -- Corrected a bug where a vertical database listing was being used in - the query command. -- Added new argument to parse_args() to prevent command arg overflow. -- Renamed ua_db_query.c ua_query.c. -- Split scan.c out of lib/util.c -- Perhaps I have *finally* fixed the command line history in gnome-console. -- Added support for smartalloc for any global new or delete command - by overloading the global operators. -- Made the default time with no qualifier day rather than seconds. -- Fixed a bug in the store_size() routine that improperly converted from - double to uint32_t. -- Started using "bool" where possible. -- Zap SD session key once it is used. -- Added *lots* more checking for strcpy -- bstrncpy(), ... -- Added CreateTime field to FileSet record and print it to distinguish - FileSets. -- Print an information message when a new FileSet is created. -- Include the FileSet date/time in the Job report. -- Indicate if a Job is upgraded in the Job report and from what previous level. -- Incremented the database version. -- Ensure that any DB error message is printed if the start_time of a previous - save is not found. -- Free orphaned buffer in ua_restore.c in case of database error. -- Implement enum for response DISPLAY_ERROR and NO_DISPLAY -- Implement enum for create_pool (POOL_OP_CREATE, POOL_OP_UPDATE). -- Make sure FileSets printed in restore are in order. -- Add a number of bstrncat, and other protected string operations. -- Clean up old structs in dird_conf.h -- Remove all Slot invalidation code. -- Add Automatic choice message to all do_prompt() calls. -- Eliminate JobId from restore if not used. -- Clean up a few error messages. -- Make fill/unfill commands work correctly in btape. -- Enhance btape fill and unfill commands. -- Implement real Pmsg() code so that negative levels work in Dmsg() -- Implement block number check -- had to turn it off because it doesn't - work. Need to verify that it is the correct block and that block - numbers are properly written. -- Moved readline from depkgs1 to depkgs. -- Reworked the configure code to handle readline correctly. This was broken - mostly due to the fact that the readline routines are nested down one - directory. Also, I missed one header file that was needed (possibly added - in a later version). -- Put correct include on the dependencies make for Console readline. -- Remove JobMediaId from VOL_PARAMS (no longer needed). -- Sort VOL_PARAMS by JobMediaId using SQL in cats. -- Add jcr as argument to block.c read_block... routines so that error - messages are immediately displayed. -- Make bsr_dev() edit an error message if it is turned off and return 0. -- Add checking for the BlockNumber in the read routines -- lots of - false matches are found -- much check writing end. -- Now sort bsr volumes by JobMediaId -- produces better results. -- It turns out that under certain circumstances, when doing a restore, the - Volumes will not be written to the BSR in the correct order. I don't - know exactly why, but many thanks to Dan Langille for reporting this. - The solution is to sort the Vol_Params within each bsr (done), and to - sort the bsr chain (not yet implemented). Note, the bsr chain should - always be in order unless the user explicitly specifies the JobIds in - a different order. -- Began implementing C++ structs rather than typedef structs as in C. -- Added volatile to a lot of variables that are used in two threads at - the same time. This should prevent improper optimization. -- Fixed a missing space in the "run job=xxx where=" the where was - glued to the end of the previous stuff (bootstrap filename). -- I *finally* found the cause of the mysterious failure of shell expansion. - It was due to the read() getting interrupted! That's what opening up - SIGCHLD will do! -- Remove unused default tape drive names. -- Create a new status.c file in stored and split the status code out of dircmd.c - -2003-05-22 Version 1.31 Beta 22May03 -- I discovered that C++ permits "prototyping" structures e.g. struct A; is - a valid statement. This permitted me to eliminate all the void *jcr, in - favor of JCR *jcr, which pointed out a number of bugs in block.c. -- Change lib/bmisc.c to bsys.c (system routines). -- Add set_working_directory() to lib/util.c -- Remove some unneeded setjcr_job_status() since Jmsg(jcr, M_FATAL,...) - already sets it. -- Do not increment jcr->Errors for Fatal errors -- they represent non-fatal - errors. -- Fix a few more places in FD where Errors was not incremented. -- Print unexpected (or incorrect) termination message returned from FD. -- Use switch() instead of giant if statement in verify_vol.c -- Protect overrun from do_shell_expansion() by passing max length. - -2003-05-20 Version 1.31 Beta 20May03 -- Add mandrake to platforms -- Suppress error messages if no bytes written to tape. -- Suck up bootstrap file even on error so that Dir sees our error message. -- Pretty much finish off the Win32 backup code. -- Add DESTDIR code to autostart for creating non-root rpms -- Echo input read from a script in Console. -- Clarify error message for VerifyToCatalog -- Add error counts in restore for M_NOTSAVED. -- Adapt bfile.c to handle both Win95 files as well as WinXP files. -- Add MTIOCERRSTAT for FreeBSD (clear error status). -- Correct double jobmedia record when cancel at EOM reported by Phil. -- Correct possible write at beginning of tape during cancel at EOM - as reported by Phil. -- Document in detail how Incremental and Differential jobs work. -- Add non-fatal error count on backup and restore Job reports. -- Remove a couple uses of lld -- now prefer to edit and use %s. -- Fix directory could not be accessed on Win32. -- Improve message indicating that last Full backup not found. -- Fix free() too early in directory traversal code. -- Prune Jobs with no JobFiles or that have JobStatus!='T' -- Add a few more command line scans for prune/purge. -- Restrict valid characters in a Volume name, and document it. -- Make new Win32 save/restore work. Still a bit more to do. -- Use reentrant version of mysqlclient library. -- Use more machine independent way of finding gcc version. -- Fix race condition in sql_list where messages edited before locking. -- Lots of testing saving/restoring 6GB files. -- Add where to restore where=/tmp -- Complete implementation of Win32 streams in FD. Must test. Also, - must implement new streams in SD. -- Make termination of daemons more "error" tolerant. -- Make default "duration" days rather than seconds if there is no modifier. -- Install bcopy. -- Add detection of available Win API's so that a single binary will - work on all Windows systems. Reference those APIs through a pointer. -- Remove use_win_backup_api and enable it in bfile.c if system supports it. -- Modify dev.c so that it works if MTEOM is not defined (BSDI). -- Change MT_xxx to BMT_xxx to prevent conflicts with BSDI. -- Detect strtoll() in configure. -- Implement replacement for strtoll() for BSDI. -- Add platform files for BSDI. -- Use Jmsg() instead of Jmsg1() in acquire because File:line prefixed in dev.c -- Use Jmsg() in write_block_to_dev() so that no messages are lost. -- Rework autochanger code in restore to handle case of cassette not in magazine. -- Implement Windows BackupRead/Write(). I now have permissions right!!!! -- Additions to the manual (Purging, Autopruning). -- Add doc to code in autoprune. -- Begin adding Level = Base. -- Make Jmsg recognize console and direct messages directly back to it. -- Hopefully fix mess in mount.c when a tape expires. -- Fix restore bug recently introduced due to Unix backwards status convention. -- New bacula.spec from Scott -- Add globals for database name and version and print them in traceback. -- Eliminate SubSysDirectory in each daemon conf file. -- Implement get_yesno() and get_pint() in UA. -- Make Jmsg aware of console. Messages now sent directly to Console. -- Created a single bacula.spec.in for by the MySQL and SQLite builds. -- Added proper configuration to console.in and gconsole.in -- Start adding textdomain() code for translating. -- A number of minor code cleanups. -- Rework shell expansion just a bit. -- Add rewind() when releasing a tape before acquiring the next one. -- Implement addition of Description in Service entry for Win32. -- Update manual to eliminate unclear autochanger points as mentioned - by Dan Langille. -- Implement DESTDIR everywhere. -- Rework spec files for 1.31 and combine the main spec and the client - only spec making a client package. At the same time, rename the packages - so it is a bit clearer to the user. Also fix the build to work - as non-root (scriptdir was not prefixed with $RPM_BUILD_ROOT). -- Correct Auto Changers and all other forms to Autochangers in the - manual. -- John reported needing to do two "mount" requests, and indeed that - was the case. It turns out that pthread_cond_timedwait() does not - always return zero when awaken by a pthread_cond_signal(). -- Include RunBeforeJob and RunAfterJob output in job output report. -- Implement a "real" Admin job that prints a mini-job report. -- Clean up a few error messages in findlib and filed. -- Recent changes to gnome-console caused initial output to be - lost -- now fixed. -- The Win32 version crashed after each job. After hours, it turns out - that when running with LocalSystem privilege (and not as a user), when - Cygwin does pthread_kill(id, SIGUSR2), it gets a memory fault. -- Moved stored/fdmsg.c to lib/bget_msg.c, and moved SD messages to - stored.c. So now bget_msg() can be used by both the SD and FD. -- Changed Director's bget_msg() to be called bget_dirmsg() to avoid - any possible confusion. -- Implemented bget_msg() in general everywhere in the FD except for - job.c where the Dir and FD are communicating. -- Implemented a Director only heartbeat in the FD for the cases where - there is either no connection to the SD or the FD is already reading - from the SD. start_dir_heartbeat() ... -- Add heartbeat to restore and verify volume. -- Add "Heartbeat Interval" to Storage resource, which sets interval the - SD sends heartbeats to the FD and DIR, 0 disables heartbeats. -- Add "Heartbeat Interval" to FileDaemon resource, which sets the interval - the FD sends heartbeats to the DIR, 0 disables heartbeats. -- Added heartbeat from FD to Dir every HB_TIME rather than forwarding - SD heartbeats. -- First cut label dialog. -- Turn on new semaphore code for simultaneous Jobs. -- Fix cancel trying to release semaphore's not acquired. -- Implement get_pint() and get_yesno() for UA. -- Implement find_arg_with_value() for UA. -- All command line "slot" to be specified for label command. -- Rework heartbeat code in FD to correctly terminate. -- Fix btraceback to use smtp and to eliminate double // -- Fix "storage" command to include ssl for verify and restores. -- Add Heartbeat code when SD is waiting on a tape -- heartbeat every 20 mins - to keep stateful firewalls from timing out the connections. -- Fix src/stored/Makefile.in typo causing problems in statically linking - btape. Thanks to Lutz for reporting this. -- Create an is_client_alive script for checking if a client is alive. - Using this script prevents generating error messages. -- Added corrections and updates to manual provided by Phil -- thanks. -- Added RequireSSL to each program/daemon configuration. -- Added EnableSSL to each correspondent for each program. -- Added the Console resource to the Director (need to - implement individual Console authorization). - -2003-04-28 Version 1.30 released -- Fix command history for gnome-console (must malloc). -- Add two cancel points in acquire_resources(). The job will not - be immediately terminated in all cases. -- The new AutoMount code broke File archives -- fixed. -- Correct watchdog mutex race introduced yesterday. -- Add JobLevel to Admin run started by UA. -- Add -v to daemon startup scripts -- Implement bmicrosleep(sec, msec); -- Implement When for "run" command. -- Remove unsigned from socklen_t definition in hopes it will work better - with older systems. -- Remove code that attempts to set PID dir and SUBSYS dir if they - do not exist because it set them to sbindir! -- Modify mount to initially attempt to read the volume if Bacula - wants a tape, none is mounted, and "Automatic Mount = yes" is set. -- Prohibit setting --sbindir and --with-subsys-dir the same. -- Fix missing argument that cause Kaboom in update slots. -- Fix orphaned bsock when UA gets error contacting FD or SD -- Nearly full implementation of Win Backup API, but it does not - work due to lack of permission! Arggg! -- Implemented restoring directory permissions as they should be. -- Implemented reasonable regression script. It found a number of - restore errors. -- Implemented the following @ commands in the console that work directly - in the console rather than in the Director. - input - read input from a file - output - write output to file - tee - tee output to file and terminal - time - print current time - version - print current version - exit - quit - quit - quit -- Implemented new bfile io routines that will permit implementation of - Windows native APIs for reading/writing files. -- By default always update hard links with the prefix, but do - not update soft links. It seems inconsistent, but it is what - cp does. -- Implement wait command in Console that waits until no jobs are running. -- Fixed the < code in Include/Excludes, which forgot to skip over the <. -- Do NOT attempt to chmod() a soft link as it will change the file behind - the link! -- OOPS! Lutz ran into a problem. In attempting to prevent string overflows, - I used bstrncpy() on a variable that was malloc'ed thus truncating - Volume names! Arrrggggg! -- Lots of documentation of new features. -- Rework Volume name scanning in console, made much more logical - and corrected a bug (confusion in calling sequence). -- Cleaned up a few error messages in cats adding more info. -- Add the IP address to error messages due to bad connects to servers. -- Implement default File output in config files so user can start - saving right away without a tape drive. -- Protect inet_ntoa() with mutex in case it is not thread safe. -- Eliminate termcap from use in gnome console. -- Remove unused SD maximum volume files and maximum volume jobs. They - are implemented in the Director. -- Make the default for Incremental and Differential saves to compare - against both st_mtime and st_ctime rather than just st_mtime. - This includes files moved or copied. - Thanks to Matthias Wamser for bringing this fix to our attention. -- On Win32 clients, make a pass through the include/exclude patterns - and change any back slashes to foward slashes. Prevents creating - unusable directory names containing both conventions. -- Move ls -l output on restored files to M_RESTORED class. -- Make gnome-console compile correctly on RH8.0 -- label barcodes now works. -- Implemented "update slots". -- Tweak btape "test" to always print suggestion for re-read last block. -- Implemented "Cleaning Prefix" -- Update alter_mysql_tables.in -- More work on barcodes. -- Zap VolHdr in SD when attempting to label a tape that is not - there. Prevents false tape names the next label command. -- First cut of bar code reading is implemented. It doesn't do - anything but return the list to the Director. -- Implemented relabel command that relabels "Purged" Volumes. -- Check exit code in RunBeforeJob and err the job if it is non-zero. -- Remove old testsuite -- too complicated -- Print length when Authorization fails because of bad length. -- Fix problem of NumVols in Pool getting reset on startup. -- Implement full listing of DB records by listing them vertically - instead of horizontally. -- Make changes to mysql scripts as suggested by Lutz Kittler -- Fixed code to write Uname to Client record. -- Fixed a problem (in btape) where Pmsg() was not printing. -- Moved re-read last block test to last in "test" command of btape. -- Lots of new documentation. -- Fixed newvol.c to handle retrying 10 times if the volume name already exists. -- Removed int_least16_t from sha1.h because it does not exist on some systems. -- Release job in SD if canceled and waiting on a mount (better cancellation). -- Prompt for Client in restore if not specified. -- Print "Selection is empty!" if no selection list found. -- Add new spec files and bacula.desktop from Scott. -- Update client every time a job is run. -- Add verbose option to daemons for printing more user error info. -- Test if console works with readline 4.3 (yes, it is OK). -- Release new depkgs -- Release new winbacula. -- Add Uname info to Client DB record. -- Improve error messages and make them more consistent when a non-existent - Device is requested. -- Separated the -mwindows option so that only Windows programs - are built with it (bacula-fd, ...) the tty tools such as console - dbcheck, smtp, testfind, ... are now able to be run in a standard - Windows DOS box. -- Add | and < options to Exclude the same as in Include. -- Add typed in input to the text window in the gnome-console. -- Change function that gets the entry text (previously had orphaned buffer). -- Fix multiple Director problem in gnome-console (thanks to Lutz Kittler). -- Thanks to Renato, I was able to test Bacula on a FreeBSD tape drive. - There are a number of significant differences: 1. reading less than - the number of bytes in a record returns an I/O error. 2. ioctl(MTEOM) - looses the file position. 3. Reading two two EOF marks (or ioctl(MTEOM)) - leave you positioned after the second EOF, so you must backspace file - to be able to append. -- Added BSF at EOM = yes/no to Device resource to allow proper positioning - at the end of a FreeBSD tape. -- Made btape "test" do much better testing of error conditions (i.e. - it now ensures that the append went well). It will automatically - detect problems and apply fixes and then retry the test, if it - finally succeeds, it clearly says what directives need changing. -- Add Scott Barninger's rpm changes to the build environment -- Add changes to mtx-changer so users can add eject and sleep for - certain autochangers. -- Implemented FreeBSD chflags (user defined flags). -- Turn restore errors during setting of owner and modes into - warning messages -- for restoring files as non-root. -- Fix how prefixes are handled in restoring soft links. -- Modified btape "test" command to do only those things that - Bacula actually does. There is much more explanation, ... -- Update manual. -- Finally had to back up to gcc version 2 from version 3 to avoid version - 3 nightmares. -- Final cygwin tweaks. -- Move start time to *after* the resource locks are acquired. -- Unable to duplicate Phil's disabling of Bacula with nmap, but - did make the authentication code a bit more conservative for - dealing with bad input. -- Added code to the query command to escape all strings input - before substitution and sending to the SQL engine. -- Escape user entered filenames for restore command. -- Cleaned up the waiting code a bit -- using broadcast instead - of signal and counting the waiters. -- Implement new pthreads semaphore code. -- #define new semaphore code rather than workq on USE_SEMAPHORE. -- Lots of improvements to the document to address recent support requests. -- Implement cycle through a set of tapes suggested by Eugeny - Fisher with the "RecycleOldestVolume=yes" record in the - Pool resource. Basically this record causes Bacula to purge - to oldest tape when no more tapes are found. -- Correct a number of small incorrect interactions between limit - variables during recycling. -- Corrected a bug in db_create_media_record() where VolMaxFiles and - VolMaxJobs was not written to the database. -- When the Director starts, the Pool record is updated in the - database with the current contents of the Pool resource. -- Corrected bnet_connect() to immediately stop (rather than looping - for the timeout period) if there is a fatal error (socket, or - hostname to ip). -- Reworked "purge" code to make purging Volumes easier. -- Made "list volumes" list the volumes in all pools -- also - "list volumes pool=Default" does not produce and error message. -- List Pool record after doing "update pool". -- Remove pid file code from Win32 -- not really necessary. -- Make bnet handle null jcr during cancel rather than crash. -- Add CygwinInstall.bat and CygwinUnInstall.bat -- Add db_lock() around newvol.c code to prevent race condition if multiple - callers want a new Volume name. -- Lots of cleanup to Win32 code, with additional error messages. -- Make Bacula work on Win95 (test for GetAttributesEx). -- Add better error messages when end of media is reached or volume - capacity execed. -- Turned off signal catching in readline(), necessary to keep console - from crashing on ctl-Z with RedHat 8.0. Thanks to David Craigon for - testing this. -- Make the 3rd and hopefully final change to the Finclude structures. - This new version permits multiple sets of options (more code to be - written) to be applied against the same set of files. Thus one can - have options that with match of *.gz and a different set of options - for *.c, ... -- Integrated GNOME Console font resource code supplied by Phil Stracchino. -- Check for job_cancelled() in bnet_connect() code to stop wait loop if - client not available. -- Fix early end of file scanning conf file in lex.c, which previously - caused ABORT -- now reports error. This could happen with an unterminated - string for example. -- Move Maximum File Size code before write and detect error on writing EOF. -- Additional fix for Solaris 2.6 and a bdb.c fix submitted by Armin Buehler. -- Added detection for Solaris 2.6, which uses older setsockopt() calls. -- Defined sockopt_val_t for setsockopt() calls. -- Added fixes sent by Bevan Anderson that fix multiple connects to FD - (I zap keys for security, so must put back dummy key). Also a fix - to the Internal database that wrote garbage after the filename in - the database. -- Back out the __SVR4 changes. -- Add automatic configuration of socklen_t -- Attempt to fix problems reported by Lutz with multiple simultaneous - open file Volumes (experimental code). Serialized acquire. This may - fix the problem, but more thought and testing is necessary. -- Add table of "supported" autochanger models. -- Add Solaris 2.6 (__SRV4) changes sent by Peter Schmitz. -- Correct tape selection code in SD (|| => &&). Thanks to Chuck Hemker - for the patch. -- Eliminate FileOptions. Implement new Finclude and Fexclude that - have file options contained in it. New structure must be transmitted - to FD. -- Split Include/Exclude into new inc_conf.c file. -- Cleanup new Include/Exclude and FileOptions. Structures in Director - now correct. Must transmit FileOptions to FD. -- WARNING: With the adddress and port code in the Catalog you MUST - remove old address= and dport= records!!!!! -- Added code to remove cancelled jobs from the workq -- needs testing. -- Added first cut AIX from output James MacLean sent me. -- Second cut of FileOptions. -- First cut of parsing FileOptions and Counters. -- Added address:port for MySQL as well as socket for local access. -- Fixed job.c in filed to properly handle excluded files. Apparently - I changed the daemon protocol but forgot to update the code. -- Enhance testfind to handle include and exclude files -- Fix getdomainname() prototype for Darwin -- Added new -u and -g options for specifying userid and groupid to - use when running, so that Bacula can reduce its privileges. -- When Bacula was hanging due to an NFS volume being down, I - fixed a few places in the File daemon where is should have immediately - terminated the connection instead of waiting for the Director to do so. -- Added first cut support for Darwin. -- Temporarily comment out the O_NOFOLLOW to avoid possible subtle problems. -- Implemented O_NOFOLLOW in creating files in create_file.c to prevent - creating a file at the end of a symbolic link. -- Use chown() if lchown() does not exist (e.g. Darwin). -- Always close stdin on startup to avoid having /dev/console attached. -- Change all DATE occurrences to BDATE because it is used by Cygwin headers. -- Add printing of Volume names in SD status output. -- Display all open devices in device chain in SD status output. -- All changing Pool in console run command. -- Thanks to Eric Bollengier for pointing out that the run_program() - return status was not correctly generated. Now fixed (I hope). -- Corrected crash in Internal Database getting Volumes. -- Flush all daemon messages at the end of every job. -- Fix Install.bat script so that Bacula restarts after reboot on WinNT/2K systems. -- Minor changes in the gnome-console directory. -- Integrated in my old Tcl/Tk code into src/tconsole and moved it up - from C to C++. Pretty crude, but it is a beginning. -- Close syslog() %n exploit in message.c -- Edit space before each line in gconsole. -- Added INCEXE structure so we can have FileOptions. -- Added support for multiple simultaneous open file volumes. -- Fix hard linked files so that the one saved is always restored. -- Add * to restore "dir" listing to indicate marked files. -- Add ability to make md5sum and sha1sum in lib directory. -- Work a bit more on the new daemon protocol. -- Use unmask of 022 or more restive -- Create File volumes with 0640 permissions -- Added support for SHA1 signature. Need to modify DB to have type. -- Document SHA1. -- Work a bit on getting proper child status from bpipe calls. -- Added Ludwig's mtx-changer to the examples/devices directory. -- Added a Warning not to use the Internal Database when it is initialized. -- Compiled and tested SHA1, and added it to the library. -- Added code to print the "load slot" status after autoloading. - -============================================================================= -2003-01-24 Version 1.29 released -23Jan03 -- Tightened up permissions on all .conf files to be 640 so they are not - world readable. -22Jan03 -- Added prefixlinks=yes/no Job record to specify applying the Where - prefix to absolute soft links. Code is not yet passed to FD, because - FD would then be incompatible with version 1.28. -- Added skeleton of installation for Gentoo release for Patrick Naubert. -- Add timer on open() for reading or writing a FIFO file. -- Put btraceback and btraceback.gdb in sysbin dir (a bit of polution, - but at least dumps will work). -20Jan03 -- Added "append" all messages to a log to default bacula-dir.conf -- Added WriteBootstrap to default bacula-dir.conf -- Made smartall.c print "Out of memory" if malloc() fails. -- Added pthread btimer routines. -- Added timer to FIFO open statement -- George was still having problems with VolUseDuration failing. - On looking into it, one line of code subtracting 1900 was - mysteriously missing from the source -- bizarre. -18Jan03 -- Yesterday's version corrects all the problems I was - previously having, and my production jobs are now completing - properly. -- Added a #define dev_cap() to test the capabilities bits. I just - makes the code a bit shorter and a bit simpler. -- Added phase 1 support for an output fifo device. The big - difference here is that it is a STREAM device, which means that - Bacula will only write to it and not read. Thus, Bacula assumes - that the correct "Volume" is mounted and will construct a valid - label (without needing the Volume to be prelabeled), and write - to the device. -- Added phase 1 support for input from fifo device (suppress re-read, - add empty buffer flag). -17Jan03 -- Improve printout of dbcheck with # files/path fixing. -- Zap SD authorization code after use. -- Added <> back to smtp (think about this some) -- Doc -16Jan03 -- Massive change to add jcr as the first argument to nearly - every db_ call. This is because I was storing the jcr in the - db structure, which will not work because everyone shares - exactly the same structure. -- More cleanups of error termination status in filed. -- Found another bug in message.c where %s was missing in JmsgN. A lot - of cleanup in message.c -- Found places where filename listing was made (restore, verify - vol) where the buffer could possibly overrun. -- Chain include files on the end of the list so that the - order will be correct. -- Rewrote mtx-changer to output one slot per line terminated by - a colon followed by an optional Volume Tag for the "list" command. - Preparation for handling Volume Tags. -- My production crash remains elusive. Adding debug code or running - under the debugger eliminates the problem. I found a case in - message.c where I was extending the message string by two - characters to send it to the console. VERY BAD. Rewritten. -- Started implementing fifo and program handlers (i.e. streams) - in the Storage daemon. Lots to do. -- Added a trace capability where trace statements are written - to a file. Tmsg(). Hopefully this won't be used much. -- Running lots of "production" saved by scheduling a few minutes - after the current time -- slow process ... -15Jan03 -- Removed <> on From and To in smtp.c as suggested by James MacLean. -- Added code to suppress spurious error messages during cancel, - but I was unable to eliminate all errors -- to be worked - on later. -- Up size of print buffer from 2000 to 5000. -- My production run failed again. I'm beginnig to suspect - hardware problems because running by hand or under the - debugger always works -- we will see. -- Added Update Volume VolFiles to reset correct tape files - a bit dangerous. -- Use the mysql_escape_string() rather than internal version. -14Jan03 -- Cleanup handling of JobStatus by creating a subroutine. -- Fix a number of minor things with JobStatus. -- Print FD and SD JobStatus on backup report. -- Add JCR to findlib -- so now FD stops normally when cancelled. -- My production Director segment faulted during the second Job. - I haven't been able to track it down. After rebuilding, all - jobs finished correctly. -- In investigating the duplicated Paths, I found that there - were 10,552 of them -- only Path records. After checking the - code, I do not see the reason, but I've enhanced the code to - print the full path name. -- I made a few improvements to tools/dbcheck. Mostly it provides - a bit more feedback with verbose mode on when eliminating - duplicate filenames or paths. -13Jan03 -- During four simultaneous backups, the File daemon started - detecting buffer corruptions. It turns out to be due to the - fact that the smartall.c routines were not thread safe. They - are now. -- Based on input from James MacLean and team, I eliminated a number - of places where printf could be recursively called by using "%s". -- It turns out that because of an error of my understanding of - mysql_escape_string(), the last argument was taken as the length - of the string to be escaped rather than the maximum length. I've - now corrected all my code -- Thanks James. -12Jan03 -- George Motter reported problems with UseDurations, and it seems - that there were a number of inconsistencies and problems with - FirstWritten and LastWritten. Hopefully for the most part they - are now corrected. Also fixed LabelDate if done through Console. -- Try to chase down reasons why there would be buffer overruns. - Added P & V around referencing last_fname for status. - Rewrote find_one.c with MEMPOOL, but not yet tested enough - to commit. -10Jan03 -- Give extra margin to converting filenames from Unix to Windows - in attribs.c of findlib -- dumb cygwin API doesn't provide for - a length. -- Added file:line traceback to size_of_pool_memory, check... and - realloc in an attept to get closer to the memory overrun reported - by James MacLean. -09Jan03 -- Made yet another fix to quoted string -- paths! Thanks to - Scott Medlock for reporting this. -- Made | and < work. -- Implemented FIFO reading/writing. To do so, simply explicitly mention - the fifo file (named pipe) in the Include AND add the new option - readfifo=yes -08Jan03 -- Started implementing | and < on Include names. -- Changed source to . in cats directory as requested by Andrew Kokarev. - -============================================================================= -2003-01-05 Version 1.28b released -- Corrected a typo of working_directory in bacula-dir.conf - reported by James MacLean. -- Fixed the fact that path and filenames in some cases were not - being quoted before going into the database. Many thanks to - James MacLean for reporting this. - -============================================================================= -2003-01-05 Version 1.28a released -- Corrected a missing quote in bacula-dir.conf reported by James MacLean - -============================================================================= -2003-01-05 Version 1.28 released -General: -- Implemented Bare Metal Recovery for Linux and manual procedures for Solaris -- Now using only a single technotes file kes-1.28 and will add to - it as the development goes on. -- Wrote a general purpose bi-directional pipe command. This replaces - previous use of pipes as well as the run_program previously used. -- Make BSRs stop if no more matches are possible. -- Allow unliminted number of devices in Storage daemon. -- Allow connections to Storage daemon before all devices are initialized. -- Better documentation (and btape test command) on using fixed block - tape drivers. - -Changes submitted this submission: -04Jan03 -- Add cygreadline5.dll to Win32 release -- needed for console -03Jan03 -- Add scripts make_catalog_backup and delete_catalog_backup that makes and - deletes an ASCII copy of the catalog for backup. An example of how - to use it is in the Type). -- Added error messages for SQL errors in autopruning. -19Dec02 -- Documented Bare Metal Recovery -- Create new "rescue" directory containg the Bare Metal Recovery code. -- Fiddle with SQL a bit for pruning as apparently the last InitCatalog - was pruned after the expiration date eventhough it was the ONLY copy! - I'm not sure this is fixed yet. -18Dec02 -- Allow Director to pass a NUL where string to FD (fix in FD). -- Fix installation mv of query.sql. -- Make sure btraceback.gdb is not wiped on "make distclean" -- Corrected a bug in mod of replace options pointed out by Dave Anderson. -16Dec02 -- Started adding FileOptions ... -- Fixed and incorrect print out of the number of files restored (Jarif). -- Finally fixed EndBlock (and file address for Files) in catalog! -- Added hostname to tape header as always planned. -- Removed Level code (will not implement unless strong demand exists). -- Tweaked bscan to print number of errors ignored before first SOS. -- Enhanced btape "fill" to permit using one tape and to dump last - block before writing and upon read back. -- Make fsf_dev() return 0 on fail and 1 on success. -- Use new db_get_job_volume_parameters() to enhance Write Bootstrap to - contain more info (start/end file/block, file indexes). -- Added --enable-static-fd, sd, and dir to configuration to enable making - static versions of the daemons. -13Dec02 -- The btape test program was indicating errors on Adrian's machine - using the ATAPI (ide-scsi) tape drive. It turns out that this - is a fixed block driver as a consequence, Bacula must be setup - to write fixed blocks. btape was not always using the fixed - blocks defined in the Bacula config, so that has been updated. - It now works fine. A lot of tips added to the Bacula test command - to help guide the user. -- Documentation of the above significantly improved in the manual. -12Dec02 -- Added code in watchdog to permit setting and clearing child timers. If - the timer expires, the child process is killed. -- Modified restore to handle differential jobs. -- Added a new test to the btape "test" command -09Dec02 -- More documentation of new features (week position in scheduler, bsr). -- Re-read last block written on full tape to verify it. -- Fix segmentation fault with btape fill command due to missing FileSet MD5. -07Dec02 -- Created better SQL input editing routines str_to_int64 and str_to_uint64() -- Pull Client from database in Console restore command. -- Create a Unique list of Volumes to be mounted (previously had repeats). -- Made many of the SQL searches better by using the ClientId rather than the name - in the restore Console command. -- Modified reading of a tape to include the VolFile info. Once the - tape is past the specified file, reading stops. The BSR now includes - both the VolFile and VolBlock. Currently VolBlock is not used. -- Handle multiple volumes better by creating a real volume list with all - parameters in it. -- Display "At prompt waiting for input" in gnome console when at subcommand - prompt. -- Broke ascii to internal and internal to string editing routines out into - new lib/edit.c file. -02Dec02 -- Added a readme and an afs-bacula script to the examples directory - that permits Bacula to backup an AFS filesystem. Thanks to - Lucas Mingarro for the submission. -- Added A Sun-desktop autoloader script and Device definition to the - examples/devices subdirectory. Thanks to Lucas Mingarro for the - submission. -- If the WriteBootStrap fails, the job will now be marked in error. -- Added a week position to the scheduler syntax that allows you to - specify 1st, 2nd, 3rd, 4th, or 4th, or first, ... fifth as a week - position specification in front of a day. So if you say - - 1st sun ... - - the scheduler will start only on the first sunday of the month. The - day specification can also be a day range e.g. sun-fri. - This code is untested. -- Implemented bpipe.h and bpipe.c in src/lib, which defines a bi-directional - pipe. This allows executing other programs and sending them information - as well as getting info from them. -- Replaced the previous pipe usage with bpipes in RunBeforeJob and - RunAfterJob. -- The mail program now uses bpipes rather than pipes, which means that any - error output will appear in the job output (truly bi-directional). -- Modified BSR to handle counts and to stop when no more matches are possible. - This is untested. -- Improved error messages in smtp. - -============================================================================= -2002-12-12 Version 1.27d -- This is a minor update that fixes a segmentation fault in btape - as well as reduces non-important error messages in bscan. - -2002-11-29 Version 1.27c -- Yet another silly error duplicating a column name in the SQLite - make tables. No code change, just a make file. - -2002-11-29 Version 1.27b -- Set DB version to 5 in DB make files. - -2002-11-28 Version 1.27a -- Use g++ instead of gcc for testfind in tools - -2002-11-27 Version 1.27 (26Nov02) released 28 November 2002 - -General: from kes25Nov02 -- Mostly Cygwin changes - -Changes submitted this submission: -- Updated bdb_find.c to have new calling sequence for db_find_job_start_time -- dird/catreq.c edit in Volume name in error messages to SD -- attribs.c switch to using the cygwin API to convert from POSIX paths - to Win32 paths. This now permits Win32 path specifications in Include - statements (all combinations not yet tested). It also avoids the large - number of errors seen by Lutz if a Win32 path is specified in the Dir. -- Update testfind help and remove set_attribsEx debug code. -- Build testfind as default. -- Turn off debug message in stored/askdir.c - -General: from kes21Nov02 -- Another change in the database. You MUST either re-initialize - your database or use the appropriate ./alter_xxx_tables in - the src/cats directory. - -Changes submitted this submission: -- Additional documentation. -- Added MaxVolFiles to the database (not yet implemented in code). -- Increased the database version from 3 to 4. -- Change VolMaxBytes to MaxVolBytes, which is much more descriptive. -- Compressed unnecessary spaces out of a lot of SQL statements. -- Changed many %d to %u where unsigned integers are used. -- Added the Bacula version and build date to each backup output. - This will help knowing what version of Bacula was used. -- Implemented VolUseDuration MaxVolBytes, MaxVolFiles, and MaxVolJobs - based on maximums set in the Volume (Media) record rather than in the - resource. This means the values can be individually set on a Volume basis. -- Allow commas separating Include options (this was a subtle bug). -- Added maximum string length argments to a number of subroutines to - prevent buffer overflows. Most notably was do_prompt(). -- Replaced MANY occurrences of strcpy() with bstrncpy(), which guarantees - both that the length is not exceeded and that the string is properly terminated. - This has a risk of a certain destabilization -- as does the changes to - the SQL noted above. -- In cram-md5 routine use my_name if gethostname() returns an error. -- Increase timeout from 2 minutes to 3 minutes in authorization code. -- Check the full string including \n in authorization. -- Throw away any response longer than MAXSTRING. -- Added a number of additional error checks on subroutine return statuses. -- Replaced as many lld's with edit_uint64 as I could find. -22Nov02: -- Added MaxVolBytes to Pool record - had forgotten it. Updated DB version. -23Nov02 -- Update manual to document new Pool/Volume attributes -- Correct make_sqlite_tables (typo, plus missing value in Pool) -- Fix bizarre behavior in gnome-console and console when auth fails. -- Add Pool attribute query -- Add a few more error messages in askdir.c -- More strcpy() conversions to bstrncpy(). - -General: from kes18Nov02 -- Did a number of cleanups of string copying to limit the length - and prevent buffer overflows. - -Changes submitted this submission: -- Added a mutex arount the gethostbyname() so that multiple simultaneous - jobs get the correct address. -- Added the MaxVolJobs to the Media alter tables script for MySQL (forgot it). -- Changed arg to db_find_job_start_time to be POOLMEM for returning the string. -- Add the new VolUseDuration and MaxVolJobs to all the db_ routines. -- Use bstrncpy() in most places in the db_ routines to prevent a bad - database from crashing Bacula (self protection). - -General: from kes13Nov02 -- You MUST either re-initialize your databases or use the - ./alter_mysql_tables - or - ./alter_sqlite_tables - in the /src/cats directory to modify your database tables. -- Major improvements to dbcheck including an interactive mode. - -Changes submitted this submission: -- Implemented VolumeUseDuration and MaximumVolumeJobs which control - when a tape can be marked Used. -- New tape status "Used" means it was used and cannot be used any more. -- Defined utime_t which is 64 bit epoch time in seconds. btime_t is - 64 bit epoch time in microseconds. -- Created alter_xxx_tables to add new columns (VolUseDuration, MaxVolJobs) to - database. Incremented db version. -- Changed a few subroutine names concerning dates to be more descriptive. -- Fixed several places where the last filename was not stored in JCR in - FD verify_vol.c and restore.c -- Major update to dbcheck. Unfortunately I used subselects, which work - perfectly fine in SQLite, but not at all in MySQL. I must now rework - it for MySQL. What a pain! -- Removed "Database found" from configure output. It was no longer used or valid. -- Corrected doc --working-dir => --with-working-dir Thanks to Tuck for - reporting this. -- Added the database name to the error message for mismatched DB version. -- Commented out GMP and CWEB from configure as they are not currently used. - -General: from kes09Nov02 -- Converted the manual over to a new format written in wml. This - gives navigation buttons on the top and bottom of each page - as well as a standard page size. -- Updated the main Web site, providing a menu bar to the left - and much better organization and presentation of the information. -- Added code to recognize a Volume written with a larger block - size than specified. The code automatically adjusts. - -Changes submitted this submission: -- Created a new scripts directory and moved most of the scripts - previously in the main directory there. This cleans things up - quite a bit. -- Moved the randpass stuff into autoconf. -- ensure that the generic make_bacula_tables and drop_bacula_tables - are installed. -- Added code to filed to allow it to be run from inetd. Just add the - -i option. I have not tested it. - -General: from kes30Oct02 -- Alex found a problem with GZIP compression -- fixed. -- bacula stript fixes. -- Segment fault in Director fixed. -- Added openbsd to platforms - -Changes submitted this submission: -- GZIP compression was broken for large files due to a variable that - is changed during the compression. This was relatively easy to fix. - However, there were a number of fixes required to make GZIP and SPARSE - files work together. Found one more place in bextract where SPARSE_GZIP - testing was missing. -- During testing of the above, I ran into the restore problem of multiple - FileSet records. Fixed by including the FileSetId and the MD5 on the - selection string, then always using the FileSetId. It is a bit - confusing for the user, but ... -- Francis found a problem with bacula.in (fixed - thanks) -- I found another problem with bacula.in, so now it REALLY should work - on most systems. -- Added the Replace options code for restores. Not tested. -- Fixed an ugly stack overrun bug in reading the config file - that has been in for a long time. I found this in testing on FreeBSD - where the Director seg faulted. - -General: from kes29Oct02 -- Major change to the bnet communications routines. - -Changes submitted this submission: -- Modified the bacula script to use pid files, so this script should - now work on more platforms. Updated devel_bacula as well. -- Added the full GNU hostname on the configuration print output. -- Added gettimeofday() to configure, and tweaked a few variables for - OpenBSD. -- Added a chapter to the manual on Porting Bacula to other platforms. -- Documented in Tips how to use the WriteBootstrap record. -- Modified bc_types.h to error if 64 bit types are not found. -- Pass replace option for restore to the FD (no code to use it yet). -- Modify the FD to pass back the GNU OS string as well as the DISTNAME - and DISTVER. This needs to be put in the Client record in the catalog. -- Major reworking of the bnet routines to eliminate the zero length which - previously indicated a signal. This risks to create some subtle communications - bugs. The changes now permit blank lines to be sent from the user to the - Director. -- Found and corrected a few more places where the Win32 attributes were not - being recognized. -- Permit spaces in the Where string (restore) by bashing/unbashing them. -- Handle quotes correctly in the Console program (actually Dir ua code). - Previously they were not handled in the middle of a string. -- Corrected two error message (error reading file), which previously stated - it was a network error. -- Reworked the files in the binary Windows release. Removed unused programs - and added a README with the copyright as suggested by John. Also added - console.exe to the release. -- Found and corrected an autoloader mount problem where the wrong tape - was specified. Previously it looped, then gave up. Now it correctly - detects the volume is not correct and zaps the Slot in the catalog. - -General: from kes23Oct02 -- I have mainly worked on getting all the details of a Restore - to work correctly (new tape format, support for Win32 - attributes, ...) -- Trademarked name Bacula. -- Implement Bacula tape format 11 (1.0 Immortal). This format - will be maintained forever. -- Accept Any Volume is yes by default. This modifies Bacula's behavior - when writing tapes. - -Changes submitted this submission: -- Corrected a bug on FreeBSD where CFLAGS would get a "yes". I was - unable to reproduce this, but a user confirmed the correction. - It was a problem with detection of largefile support, which FreeBSD - has by default. -- Added a new "license" chapter in the manual. Re-licensed a number of - library routines (bnet.c, hmac.c md5.c, cram-md5, ...) with LGPL so that they - can be used in proprietary software to access Bacula if so desired. -- Move Director's AutoChanger doc to correct location (in Storage - resource). -- Document why trademark (to protect compatibility). -- Implement and turned on Bacula tape format 11 (also BB02). This - format moves the VolSessionId and VolSessionTime from each record - header into the Block header. This is MUCH more efficient when reading - records as now whole blocks can be skipped. - Also added JobStatus in End Of Session record, and added MD5 for - FileSet, which is necessary to insure uniqueness. -- Implement a new Bacula time format for btime_t. It is Epoch time - in microseconds (i.e. base 1 Jan 1970 in microseconds). - This replaces previous floating point times. -- Added Win32 extended attributes. In doing so, I moved all attribute - handling from src/lib into src/findlib. Added new streams for - Win32 attributes and for GZIP Win32 attributes. -- Modified "Accept Any Volume" so that it really permits any volume - in the pool to be mounted. -- Removed "Mount Anonymous Volumes" from Storage daemon config. -- Implemented sparse files. You must add "sparse=yes" on the include line - for it to be enabled. -- Print "None" in backup summary rather than 0.0% if there is no compression - enabled. -- Improved error checking in daemon connection/authentication code to prevent - garbage data from harming a Bacula daemon. -- All daemon tools MUST have a config file. -- Completely strip drive specification on Win32 if a Where prefix is specified. -- Corrected DB info for writing to files. Now the File Address is stored - in File-Block variables in the catalog. -- All Storage daemon tools now use common code for acquiring/reading - Volumes. -- If a device is unmounted, report it even if the device is not open. This - will help inform users who have BLOCKED Bacula by unmounting a drive. - - -============================================================================= -2002-10-12 Version 1.26 (10Oct02) -General: from kes10Oct02 -- Changed Job name conventions to avoid : which is an illegal - character on Windows. - -Changes submitted this submission: -- Added check for inet_pton to configure.in. If it does not - exist (e.g. Windows) use inet_aton -- Documentation on GZIP. -- Another restore doc example. -- Documented btape fill command. -- Set default restore directory from /tmp to /tmp/bacula-restores -- Add additional no find error messages to sql_get.c -- Creating a bootstrap file on Windows failed because the Job name - contained colons which are illegal on Windows. Replaced the - colons with periods. This corrects the Windows restore problem. -- Print number of files to be restored in "restore" command. -- On Windows systems, if there is a prefix, completely eliminate - any drive: at the beginning of a path. -- Minor corrections to the tree routines to handle Windows - files such as c:/ better. Previously it insisted on /c:/, which - would then not be found in the catalog for a "dir" command. -- Modified cd command in restore to try /c: if c: fails. -- Add a new S_ISWIN32 bit to the st_mode word so that low level - routines that create files do not print error messages. -- More work must be done to restore all Windows files correctly. - Currently the following bits are not handled: - Archive - Hidden - System - Also, all the dates are not properly restored. - -General: from kes09Oct02 -- More documentation. -- Implemented new fill command in btape that permits filling - a tape and then reading it back to ensure that it works - with Bacula. - -Changes submitted this submission: -- Added ReadBytes to JCR, which contains Job bytes read by - FD, JobBytes contains compressed output of FD. -- Modified FD to pass back JobStatus, ReadBytes, JobBytes, ... - for backup jobs. This is upward compatible. -- Modified backup termination status report to contain the - compression ratio 100 * (1 - compressed-bytes/uncompressed-bytes) - This will always be zero if no software compression was - done, or if you are using a version 1.25 or older FD. -- Pickup Job termination status of FD in backup, so now - the termination status represents the state of all three - daemons. -- Implemented new fill command in btape that permits filling - a tape and then reading it back to ensure that it works - with Bacula. - -General: From kes06Oct02 -- Implemented first major cut of bscan -- program to scan a tape - and recreate a Bacula catalog. -- Fixed lseek() relative negative seek that prevented writing multiple - jobs to a File volume. -- Implemented BB02 tape format -- currently turned off for writing. - -Changes submitted this submission: -- Updated README -- Implemented new BB02 tape format, which moves the VolSessionId and - VolSessionTime from the record headers into the Block header. It - is currently turned off. -- Implemented new btime time/date format on the tape. This is currently - turned off. -- Added JobStatus to EOS tape label. This is currently turned off. -- Changed start_block, ... to StartBlock in JCR for uniformity. -- Print a message telling which tables were dropped/made with - ./drop_bacula_tables. -- Return JobType and JobLevel in db_get_job_record(). -- Implemented get_current_btime(), which returns btime_t. -- Bump debug message max size to 2000 bytes. -- Add btime_t serial/unserial routines. -- Rework all tape label routines to integrate btime and other - label format changes (currently turned off -- for writing). -- Fix lseek() to always be positive -- block.c -- Consolidate record, block, and label major #defines in block.h. -- Major implementation of bscan. Some more minor tweaking will be - necessary. E.g. add multiple records for multiple simultaneous - Jobs. -- Cleanup lseek() to always use off_t as second argument. -- Add new "created" tape label (EOT_LABEL). This generates a callback - to the read_records() routine when the final end of all tapes is - reached allowing proper termination and updating of the media records. - -General: From kes25Sep02 -- Added means to bind servers to specific address. -- Documentation - -Changes submitted this submission: -- Added DirAddress, FDAddress, and SDAddress records to the corresponding - resources that allow the server to bind to a specific address - rather than any address. This security improvement was suggested by - a user -- thank you. -- Eliminated deprecated "Address" record from all sample Storage resources. -- Made quite a lot of improvements to the bscan program. Much more - to do. Aside from details, it is able to recreate a database - from which you can do a restore. -- The s option is not accepted on all versions of ar, so replaced it - by an explicit ranlib call. -- Fixed a bug that caused the Director to crash if you rudely bring - down the console program in the middle of an SQL command. -- Fixed a bug (missing break) that caused scheduled Admin jobs to - be listed as "Unknown type". -- Removed old code from Storage daemon that used a separate FD port. - -General: From kes14Sep02 -- Better key generation on non OpenSSL systems. -- 64 bit file address support if available. -- Implement autochanger for reading -- Lots of cleanup of tape reading code. -- Automatically create all Pool resources when Bacula starts. -- Implement bscan.c -- Implement autochanger use via the Console commands "add" and "label" -- Begin implementation of a regression script -- Write bootstrap after ever job - -Changes submitted this submission: -- After noticing that the non OpenSSL random key generator was - not good on Solaris, John wrote a very nice randpass generator. -- Integrated John's makeSessionKey for generating the FD->SD - authorization. -- Statically link tools (doesn't work on Solaris). -- Document how to debug Bacula (new chapter in the manual) -- Remove unneeded printing of error message in sql_get.c -- Free SD description config record (previous oversight) -- Bash spaces when sending Director names, and unbash them when - received. -- Ensure no divide by zero in rate computation in backup.c -- Implement WriteBootstrap in backup.c -- Allow tape reading to request volume information for any - volume. -- Create all Pool resources at startup. -- Show only Backup jobs in Restore listing of last 20 Jobs. -- Handle 64 bit stat packets in restore. -- Don't do shell expansion on store_dir in config if string - starts with |. This is used for piping the program for the - WriteBootstrap. -- Ignore SIGHUP -- DéjàGnu was triggering this. -- Implement autochanger for reading, many changes to - acquire_device_for_read() -- Implement callback for reading Volume. Implement in bextract, - bls, and bscan. -- Implement bscan -- Add count to bsr. -- Fix Volume in bsr. -- Move autochanger code to new subroutine in mount.c - -============================================================================= -2002-09-05 Version 1.25a (05Sep02) Released -- Fix unitialized stack variable in bextract so it - will always read the currently mounted tape. - -============================================================================= -2002-09-04 Version 1.25 (01Sep02) Released - General: -- Added .cvsignore files in each directory to cut down on the - CVS output when scanning directories and finding Makefiles - and such which are not part of the CVS tree. - - Changes submitted this submission: -- Cleaned up a lot of the error messages in Verify, including - indenting. -- Had to remove some of the "automatic" error message printing - in the DB because they are in fact things that come up - for Verify but not really errors. - - - 2002-08-30 Version 1.25 (30Aug02) Beta - From kes30Aug02 -- Fixed a bug where only the first file was restored if - it is hard linked. The other links were lost. -- In some cases of restoring to alternate directories, softlinks - were not properly restored. - - From kes28Aug02 - General: -- Bacula backups now run up to 12 times faster than version 1.24 -- Bacula can run multiple simultaneous Jobs. -- Had to turn off TRANSACTIONS in SQLite because it doesn't work - with multiple simultaneous jobs (I'm working on this). -- Added a better Job printout for Restore Jobs. -- Added a save/restore Rate to backup and restore jobs. This - does not yet subtract out operator wait time so it will be - underestimated it the Job waits on the tape (mount/label). -- Fixed a major bug caused by free()ing a buffer twice in - the Restore code. This made the SD more or less useless after - any restore Job. Arrggg! -- DIR - SD protocol changed, both must be updated at the same time. -- DIR - FD protocol changed in upward compatible way. Upgrade of - FD not required, but recommended. - - Changes submitted this submission: -- Added bell to "make" when errors are detected. -- Changed default compile option from -g to -g -O2 -- Additional documentation as usual -- much based on questions or - feedback from users. Thanks. -- Fixed example config files to use new syntax and to have a - Restore Job. -- Define ETIME to ETIMEOUT for Irix -- Added JCR filed to DB structure permitting direct printing error - messages from within the Database subroutines. - Some error messages may be printed twice as a consequence. - When I see them or someone reports them, I will remove the double. -- Added JCR to the bsock structure. This allows direct printing - of network errors from within the network code. -- Made most "trivial" debug messages have level 100 or greater. This - allows for easier debugging of new code using the range below 100. -- Began replacing all Emsg() with Jmsg() using a NULL as the JCR in - Jmsg() is the same as Emsg(). -- Fixed several crashes in the Director because of malformed config files. -- Added SpoolAttributes to Job resource. -- Pass CatalogFiles to SD. If set to no, the attributes are dropped - within the SD rather than being sent to the DIR. -- Cleaned up a number of information/error messages in user interface. - This includes eliminating the "pretty please" response in favor of - "yes/no" to delete volumes and pools. -- Cleaned up quite a number of uninitialized variables reported when going - to -O2, most were harmless, but a couple could cause problems. -- The cd command in restore was not working correctly (it didn't allow some - legal cds). -- Fixed a segmentation violation in the directory tree handling code in - the restore command. -- Handle a few error conditions in the restore command better. -- Permit "Where" to be set to nul in modification of a run command. -- Clarified the error message for Verify if an InitCatalog has not previously - been done -- thanks Chuck. -- Add MaximumConcurrentJobs to FD. -- Added code to mem_pool to die if a buffer is released twice. -- Lots of work done on SD for multiple simultaneous jobs. Split device.c - into device.c, mount.c and acquire.c -- Started writing new lock code for SD, but may back it out -- needs more - thought. Current code works, but is too complicated. Maybe can simplify it. -- Cleaned up the SD tools code quite a bit. Added bootstrap to all tools. -- Ensure that tape session labels are not split across two blocks. This makes - reading them back much easier. -- Fixed another restore bug concerning tape labels on multi-volume saves. - -============================================================================= -2002-08-14 Version 1.24 - From kes12Aug02 -- Made a new tools directory. -- Moved smtp into the tools directory. -- Created a dbcheck program in the tools directory that - checks for certain database errors and if requested fixes them. -- Put the database link flags on DB_LIBS so that it now only is - on binaries that actually need it. -- Document dbcheck and testfind programs. -- Move testfind to tools directory. -- Check for FileSet after getting Client name in Restore command. - Modify all necessary SQL commands to accept FileSetId. -- Add a db_get_fileset_record in cats directory. -- Correct list last 20 files concatenation to be MySQL - dependent. They aren't SQL standard. Use SQL standard || for - other SQL programs. -- Modify dir command in file selection to produce a long form - listing of the file/directory name. -- Add platforms/irix/*.in files to CVS -- Make Console command scanner accept quoted value fields. -- If after selecting Client to restore, there are multiple - FileSets, ask user to select one. -- After obtaining JobIds for restore, ensure that there is only - one MediaType, and select a Storage resource to be used. - - From kes11Aug02 -- Made restore actually work. -- Made console and gconsole be configured (requested by Chuck) -- Updated kernstodo -- changed fs in Job record to fileset for clarity -- The console run command was not properly picking up the command - line arguments. Fixed! -- Changed add/remove/rm to mark/unmark -- Volume keyword VolumeName was wrong, changed to Volume (in restore bsr). -- Pass jcr to parse_bsr, and if non-NULL, it will output error messages - to Job stream rather than Emsg. -- Modified lexical scanner to include caller context so that jcr can - be stored in lex context allowing error messages to be properly - routed. -- Renamed the Job message chain to be jcr_msgs. This eliminated the - previous confusion with the default value, now named jcr->messages. -- Implemented multi-volume bsr records. -- Implemented pm_strcat() and pm_strcpy() to cat/add to memory pool - buffers in same way as strcat/strcpy, but expanding buffer. -- Modified db_get_volume_names to handle arbitrarily long Volume list. - - From kes07Aug02 -- If the Console program terminated during the printing of messages, - the message file was left locked. This was corrected by using the - new read-write lock code. -- Implemented Pw() and Vw() for obtaining and releasing a write lock - using the rwl_xxx routines. -- Deleted some old pthread_mutex code from mysql.c -- In making the Irix port, I previously corrected the base64 routine so - they were not sensitive to the machine definition of char. This made - them incompatible with previous versions invalidating MD5 signatures - which are in base64 format. I have now corrected this, making the - routines compatible with the previous version but also insensitive - to the default definition of char. -- Removed some unnecessary NPRT() usage in signal.c (pointed out by - the Irix compiler). -- Add back BNET_NONO for compatibility with older File daemons. -- Implement runing a restore Job in the restore command. -- Make installation of query.sql unconditional. To prevent you own file - from being overwritten, give it a different name. -- Made parse_command_args() in ua take command from ua->cmd, this - simplifies it and allows usage in other places -- e.g. building - arguments for created run command in restore. -- Cleaned the naming of s_full_ctx to be s_jobids. -- Write the bsr created in restore to "working-directory"/restore.bsr -- Fix bugs in command line scanner in run command -- also some misplaced - breaks! -- Eliminate static cmd in ua_server.c -- Eliminate segmentation fault when using the Run command in the - Console -- forgot to init_msgs(). - - From kes06Aug02 -- Did a good amount of documentation. -- Added sql_cmds.c to CVS, forgot, pointed out by Chuck. -- Added new platforms/irix directory to CVS -- Turn off transaction debug code in sql.c -- Reworked the scheduler so that it handles the same Job starting - twice in the same hour. Previously it took one or the other. -- Tightened up the "slop" in the timings that I programmed to ensure - that the same job isn't run twice or that no job was missed. -- Increase the sleep time. -- Used job_type_to_str() in status so that Admin jobs are correctly reported. -- Add internationalization message chars to a number of routines - in util.c -- Make the watchdog timer clear the mutex when it exits. -- Some tweaks to the Restore command. It needs fixing when a Job spans - two or more volumes. - - From kes05Aug02 -- Initial cut at adding Irix File daemon support. -- Lots of work on the restore command. -- Take a stab at eliminating the "broken pipe message" - when the console program prematurely terminates. -- Reimplemented transactions for SQLite by keeping - them all in the same thread. -- quit in the Console program now waits for Bacula to - quit. To immediately quit, you must enter .quit -- Eliminated BNET_EOF -- this COULD have some negative consequences - on interdaemon communications. -- Define Job termination status for Admin jobs. -- Write new bstrncpy() function that guarantees that strcpy is - properly terminated. -- Fixed command input in ua_input.c to accept quoted items as a - single field. - - From kes01Aug02 -- The changes that added indexes to the SQLite database were - lost -- thanks to Chuck for pointing this out. Redone. -- Fixed a problem quoting strings in SQLite. This showed up - as database errors with files containing ' or " in the filename. -- Implemente restore command -- still in progress. -- Added indexes to all fields in SQLite that exist in MySQL. -- Moved unused immortal files from src/lib to src/immortal. - This will permit splitting depkgs. -- Started work on adding embedded MySQL. Cannot get the tables - to work for the moment. Please don't try to use this option. -- Convert to using single quotes for enclosing all strings. -- Implement correct quoting algorithm for SQLite strings. - Is dequoting needed? -- Started centralizing SQL statments in the Director in sql_cmds.c -- Changed a number of M_ABORTs to M_ERROR_TERM so that program terminates - but does not produce a dump. -- Allow wild-card matches in bsr for Client name, and Job. -- Change OflineOnUnmount=no as default. -- Fixed improper printing of filenames containing a space in bls.c - Thanks to Carlos for reporting this. - -=========================================================================== -2002-07-26 Release 1.23a -- Fix segmentation fault is FD status. -- Turn off TRANSACTIONs for SQLite. - -=========================================================================== -2002-07-23 Release 1.23 - From kes22Jul02 -- Updated Bacula to handle some minor differences in MySQL 4.0.2 - (still works with older MySQLs). -- Updated MySQL documentation to correct some minor errors. -- Added kernstodo to CVS -- Fixed create_mysql_database, which I recently accidently broke. -- Disallow zero length volume names in Console program. -- Create alter_mysql_tables and alter_sqlite_tables for conversion - from 1.22 table format to 1.23 table format. - - From kes20Jul02 -- Investigation of SQLite performace problems reported by Chuck. -- Updated ChangeLog -- Updated README -- made root@localhost the default email address because many smtp - servers reject root but accept root@localhost -- Added an autochangers chapter to the manual. -- Documented most of the new features in 1.23 -- Modified the SQLite interface code to start a transaction at the - beginning of a job and commit it at the end of the job. It - also commits it after 10000 changes. Hopefully this will - improve performance. -- Set the default cache pages from 2000 to 10000 for SQLite (i.e. - about 15Megs of memory) hoping to improve performance. -- Terminate last filename referenced in FD prior to copy to - avoid race problem with multiple threads and no locking. -- Enhanced the status output to include the JobType -- Print an error message if the email program terminates in error. -- If your machine has an MTUNLOCK, do it before doing an OFFLINE to - ensure that the door is unlocked. -- Added code to stored/append.c to spool attributes. This is in - a testing stage and must be explicitly enabled. -- Added a no_attributes variable to stored/append.c that prevents - the attributes from being sent to the Director. As yet, no way - to turn it on. -- Modified SQLite code so that after 10000 updates any transaction - is committed, then restarted. This keeps it from using too much - memory. -- Set the default cache size to 10000 pages (previously 2000). -- Fixed a segmentation fault on Sun due to no default value for - the JobStatus. -- Added the same indexes to SQLite that I exist in MySQL. This - VASTLY reduces CPU usage for lots of inserts. -- Added spooling to bnet_send(). - - From kes18Jul02 -- The following two changes were prompted by questions/suggestions - from A Morgan. -- If you have "AlwaysOpen = no" in your SD Device - resource, Bacula will free() the drive when it - is finished with the Job. -- If you have "Offline On Unmount = yes", in your - SD Device resource, Bacula will offline (or eject) - the tape prior to freeing it. -- Added Maximum Open Wait to allow open() to wait if drive is busy. -- Added RunBeforeJob and RunAfterJob records to Job records. - This permits running an external program with the following editing - codes: - %% = % - %c = Client's name - %d = Director's name - %i = JobId - %e = Job Exit - %j = Job - %l = Job Level - %n = Job name - %t = Job type - - From kes17Jul02 -- Added autochanger support to devices.c -- Allow user to change Slot in the Volume record. -- Implemented code in lib to run an external program - (tape changer) -- Implemented a changer script for mtx. -- Currently the changer commands used are: - loaded -- returns number of slot loaded or 0 - load -- loads a specified slot - unload -- unloads the device (returns casette to slot) -- Other changer commands defined but not yet used: - list -- returns list of slots containing a cassette - slots -- returns total number of slots -- Implemented ChangerCommand, specified in the SD Device - resource, permits editing of: - %% = % - %a = archive device name - %c = changer device name - %f = Client's name - %j = Job name - %o = command - %s = Slot base 0 - %S = Slot base 1 - %v = Volume name -- Implemented MaximumChangerWait default 120 seconds. It is - specified in the SD Device resource. - - From kes15Jul02 -- Moved techlogs from main directory to be subdirectory of doc -- Added code for strerror_r, and detection of gethostbyname_r(). -- The protocol between the Director and the SD has changed. -- Major rework of SD tape mounting to prepare for Changer commands. -- Separated Update Media record and Create JobMedia record. These - are done from the SD by calling the Director. Need separate Create - JobMedia so that when a Job spans a volume, all other Jobs writing - the same volume will also have JobMedia records created. -- Added message to user indicating selection aborted if he enters . - to a Console selection request. -- Create a jobstatus_to_ascii() routine for use in status commands. - This makes a single routine from three separate pieces of code. - Updated the code to properly handle more (all) termination statuses. -- Tried to fix the gnome-console to handle history a bit better. There - are still some problems with focus not being properly set to the edit - box after history replacement. -- Removed the shutdown() from bnet_close() hoping to fix Console termination - errors that are occassionally seen -- no luck. -- Moved add_str() to lib/util and renamed it add_str_to_pool_mem() so that - it can be used to edit Job termination codes and Changer command codes. -- Reworked how the SD mounts tapes (in device.c) so that control passes through - only a single routine. The logic is much simpler than previously, and now - adding AutoChanger code is straight forward. -- Made SD tape mounting much more fault tolerant -- more cases retry instead - of terminating the Job. -- Wrote code to edit_device_codes() for Changer commands. Not yet fully - implemented. -- Added a ChangerDevice directive to the Device resource. Still need to add - ChangerCommand. - - From kes07Jul02 -- This documents what I did while on vacation. -- A fair amount of documentation. -- Implemented Verify Volume to Catalog (needs renaming) -- Modified the database to include new MarkId field as - well as Counters. Database level is incremented from 1 to 2. -- Added first cut of managing autochangers by implementing Slot in DB. -- Fixed a good number of M_ERROR messages to be M_FATAL where appropriate. - Also converted a number of Emsg() to Jmsg() permitting better Job error - messages. -- First cut at implementing a general packet passing mechanism for bsock - to replace printf and sscanf for passing data. -- Made make_xxx_tables and drop_xxx_tables and create_xxx_database - for bdb as well as sqlite. With this each database has the - same set of scripts (with the exception that MySQL has grant_privileges). -- Modified Makefile to only install the database scripts for the - database that you are using. -- Updated the pdf script to include all the html files. -- Did quite a lot of documentation. -- Made Bacula compile correctly with DEBUG turned off. -- Implemented Pmsg() macros that permit using the debug print - routines even with DEBUG off. -- Updated job_cancelled() macro to handle JS_FatalError. -- Changed db_find_last_full_verify() to db_find_last_jobid(). This - permits working with Verify Volume to Catalog. -- Removed TRANSACTION code from incrementing NextId for SQLite. -- Implemented quick and dirty (not fully functional code) so that - console program does not die if ctl-Z is entered. -- Cleaned up backup.c a bit adding a bail_out goto to ensure proper - handling of errors with minimum code. -- Added passing Slot back and forth to Storage daemon with Volume info. -- Implemented Slot in Media record in DB. -- Implemented first cut of Counter resource in dird_conf.c. A counter - resource is part of the Pool resource. -- Implemented necessary database record. However, the resource doesn't - yet create a DB record. -- Implemented onefs (One File System) and recurse options on Include - resource. -- Implemented autopruning of Verify and Restore Jobs. -- Did a better job of calculating thread_concurrency() for Sun systems. - This permits better multi-threading allowing all the threads to run - at the same time. -- Implemented a wait_for_storage_daemon_termination(), which is used by - backup and verify volume. -- Clarified a number of UA prompts, and add feedback where certain commands - completed but printed nothing. (More work to be done here). -- Added a pile of new code to implement Verify Volume to Catalog. It is sort - of a hybrid of "restore" and "verify" in that it actually reads the tape, - then compares it to the catalog. Need Verify Volume to Client. -- Added a good number of checks for job_cancelled() this should permit - quicker and more reliable cancelling of jobs. -- Fixed one bug in restore where I used ofile instead of lname, which means - that if the lname was too long, the memory was not properly reallocated. -- Cleaned up find_one.c in findlib quite a bit. -- Link smtp static so that it works even if the libraries are messed up. -- If mail host is not found, retry with local host in smtp. -- Added slot and stream to the bootstrap record processing. -- Do offline on tape cartrige for unmount command. This can be turned off - by the user in the config file. OffLineOnUnmount in Device resource. -- Implemented AutoChanger = yes/no in Device resource. - -=========================================================================== -2002-07-07 Release 1.22 -- All the basic Restore code to handle the boostrap file is - now implemented with the exception of the Console Restore command. -- Retained compatibility with previous Restore providing no - bootstrap file is specified. However, the old code (JobId based) - will go away in a future release. -- Fixed a number of segmentation faults in the Console program due - to printing of NULL pointers -- thanks to Chuck and his Sun for - finding and reporting them -- mostly in ua_output.c. - - From kes25Jun02 -- Null pointers now are printed as *None* if NPRT() is used. -- At the request of Phil, all resources are now chained in in the - order they appear in the config file. -- Implement Bootstrap record in the Director's config file, which - allows you to specify a predefined bootstrap file for Restore Jobs. -- Allow Bootstrap on the Restore record. This is deprecated. -- Implemented code to pass the Bootstrap file, if defined, to the - File daemon, then from the File daemon to the Storage daemon. -- Added ability to set Bootstrap file in the Console when running a Restore. -- Allow scan_error() routine to be passed to lex_open_file(). This permits - using lex in the Storage daemon without worrying that it will ABORT on - a syntax error. More work is needed to direct the error messages correctly. -- Improved error messages a bit when config syntax errors are found. -- Tested and corrected some errors in match_bsr.c -- Removed askdir.c from bls and bextract by defining dummy entry points. -- bextract now has bootstrap pretty well integrated. -- Changed bextract ABORTs into FATAL and exit(1) or ERROR_TERMINATE. - More user friendly. -- Eliminated at least one lld and replaced it by edit_uint64() -- Eliminated a few more _PROTO()s. -- Corrected a problem with the SQL for in query.sql for - Listing Volumes to Restore All Files - - From kes22Jun02 -- Additional documentation. -- Reduce the time the jcr mutex is locked in lib/jcr.c -- More null pointer printing fixes in lib/parse_conf.c (debug output only). -- Added daemon filename to Kaboom message so I know what daemon died. -- Fix big bad bug introduced in watchdog.c last update that caused - a segmentation violation (forgot to check for NULL pointer). -- Add a bit more info to bad returns from Stored when starting - a job fails. - - From kes21Jun02 -- Fixed scan_to_eol -- Fixed backup scanning forgot one T_STRING -> T_UNQUOTED_STRING -- changed all rwlock_t to brwlock_t to avoid conflicts with - Solaris library. -- Added NPRT() macro to allow printing of NULL pointers, which - segment fault on Solaris. -- Cast printing of pid_t to int for Solaris compiler. - - From kes20Jun02 -- Added expect argment to lex_get_token(). -- Added tree.c and tree.h to lib directory. - - From kes19Jun02 -- Improvements to the bootstrap compiler -- Implemented first cut of bootstrap code in the Storage daemon -- Modified the authentication code to be more explicit during - failures. -- Added a few more debug message numbers with more arguments (Dmsg10, ...) -- Added more and more precise error messages when authentication fails. -- Implemented new "expect" codes in the lexical scanner that allows - the caller to specify what he wants. -- Added integer, positive integer, 64 bit integer, and integer ranges, - and name scanning to lex. -- Implemented new lex code in parse_conf.c, this reduces significantly - the code. -- Hopefully fixed a watchdog race bug that caused the watchdog to time - out a line after 1 hour rather than 6 days. - - From kes15Jun02 -- Implemented a Bootstrap file parser and matcher. -- Implemented first cut of bootstrap code in bextract -- Started clarifying different termination codes. -- Added M_ERROR_TERM to immediately terminate the daemon -- no dump. - Also changed a few termination codes as appropriate. -- Fixed create_jobmedia_record() to include all the fields such as - StartFile/EndFile, StartBlock/EndBlock. -- Print user friendly message when query mode ends. -- Fixed ls style print routines (bextract, bls, restore) to check - buffer size, to print the link if any, and to used edit_uint64() - instead of %lld. -- Moved scan_to_eol() and s_err() to lex.c to avoid dragging in - parse_conf.c for new bsr scanning code. -- New files: bsr.h, parse_bsr.c and match_bsr.c. parse_bsr.c parses - a Bootstrap file, and match_bsr.c matches a bsr against a tape. -- use strcasecmp() in several places instead of lcase(). -- Add first cut of bootstrap to bextract. -- Added File Size limit -- writes EOF after limit exeeded. - -=========================================================================== -2002-06-12 Release 1.21 -- Fixed several problems with filenames being truncated if - they contain spaces. Thanks to the user that reported this. -- N.B. To get the new queries, after the "make" and - "make install" you must explicitly replace the - existing query.sql by query.sql.new. query.sql is a - user configuration file, so it is not overwritten. -- Added GZIP compression of Included files. -- Added additional fields to tape SOS record permitting better - recovery with no database. -- Be sure to remove any !terminate statements you may have - in your config files. -- MUST UPDATE ALL DAEMONS due to protocol change to handle new - tape format. - - From kes11Jun02: -- Updated examples directory with my most recent config files. -- Modified the M_TERM meaning to mean that Bacula has - terminated in error without producing a dump. Previously, - it meant that Bacula terminate (with or without error). - You should remove any !terminate from your messages - resources. -- Changed the order of the libraries in the link so that - tcp wrappers link properly. Thanks Phil for reporting this. -- A user reported that filenames containing spaces were truncated - in bextract. This was indeed the case. They were also truncated - in Restore as well as in Verify. They are, hopefully, all fixed - now. -- Made a few error conditions in Verify non-fatal. -- Modified the Console "query" command to permit multiple SQL - statements per command. -- Implemented three new "query" options: - List last 10 Full Backups for a Client - List Volumes used by selected JobId - List Volumes to Restore All Files - To use them, simply type "query" to the Console program, and - select the one you want. -- Modified bextract to default to extracting all files (i.e. /). -- Cleaned up the code in bextract a bit. - - From kes03Jun02: -- Improve Verify command to include files examined. -- Eliminate fcntl() locking of the console file and replaced - it with a pthreads mutex. -- Note Director - SD protocol is changed to handle new tape - information (Fileset, JobType, JobLevel). -- Create config.out that contains a summary of ./configure - to see what you previously configured: "cat config.out" -- Implemented GZIP compression. Added addition syntax to - Include { } resource to permit setting of any GZIP compression - level: - compression=GZIP - compression=GZIP1 - ... - compression=GZIP9 - - Level 1 is minimum compression and level 9 is maximum. Using just - GZIP gives the default (level 6). -- Enhanced the tape format to include the unique Job name, FileSetName, - JobType, and JobLevel in the Start/End of Session records. The code - detects that tape level difference and acts accordingly. You can - add data in the new format to old tapes. -- Fixed an incorrect display message in the prune command. -- Began implementation of Verify Volume and Verify Data. -- Cleaned up File daemon restore.c a bit ensuring that termination - cleanup is done and all possible Emsgs are converted to Jmsgs. -- Modify bls.c to use common setup routines. This reduced the big - code duplication that creeped in when I added different listing - options. Also, changing tapes is now handled uniformily in a subroutine. - -=========================================================================== -2002-05-27 Release 1.20 -- Started documenting Catalog Pruning and Recycling. - Added catmaintenance.html and recycling.html -- Fixed the query command bug. -- Implemented PID files to prevent two copies of Bacula - from running at the same time. Be sure you --with-pid-dir - points to a working directory. -- Modified ASSERT() to cause a segmentation violation. This - permits a core dump. -- Worked on gnome-console. It paints better, it tells you if it - is ready to accept a command or processing one, and it is - almost entirely GTK+ (rather than GNOME, I'm removing GNOME - a bit at a time). -- Limit to 100 the number of tape labeling errors in a single Job. -- Add some additional ASSERT()s to the database routines. I don't - like ASSERTs but they do catch bugs. -- Tested and debugged recycling of Volumes. Needed to change - the Director-SD protocol slightly. -- Removed the experimental SIGHUP in the Director as it is a - potential source of errors. -- Added Level, Pool, Messages, and Storage keyword/value scanning - to the Schedule Run record. -- Improved printing of Schedule resources with "show schedules" -- Do not autoprune Jobs/Files if the Job errs. -- Updated newvol() to pass back the updated Media record. -- Fixed the "update pool" command, which was broken during a much - earlier code reorganization. -- Improved a few of the pruning messages. -- Removed readline inclusions from gnome-console (hang over from console). -- Make Jmsg use daemon message handler if no message handler is defined. - This is always the case in the SD and FD. -- Started removing __PROTO(). With C++ prototypes are manditory, so why - keep around legacy code. -- Added a good deal of message internationalization -- more to be done. -- Move cached Path into mdb structure and use POOLMEM. -- Fix verify bug introduced last update causing incorrect diffs - by turning off autopruning. -- Started adding code to distinguish Errors from Fatal Errors. -- Errors are now counted in message.c for a Job. -- More POOLMEM cleanups. -- Implemented Automatic pruning. -- Implemented Automatic recycling of Volumes. -- Added PruneJobs/Files/Volumes=yes or no to Job resource. If set, - it forces the specified pruning. -- Modified rwlock to accept multiple nested write lock - requests. -- Modified the cats directory to use the new rwlock mechanism - in place of P() and V(). -- Defined db_lock(mdb) and db_unlock(mdb). They are in effect - transaction locks. -- Add CVS Id's to most files. -- Made first cut at AutoPrune -- Added new autoprune file that is called at the end of - each Job. It then decides when and what to prune and - calls the UA prune routines. -- Modified Run (in Schedule resource) to permit overrides of - Level, Pool, Storage, and Messages. (not tested). -- Added more POOLMEM in place of char. -- Implemented daemon pid files. This prevents multiple - daemons from running simultaneously. You can run multiple - daemons if they listen on different ports. -- Documented the Schedule resource a bit better. -- Began gently adding a POOLMEM type (perviously void). - For the moment it is a #define to char, but long term - it should be its own typedef. -- Corrected a bit of spacing on the status bar of gnome-console -- Added Admin and Archive Job types. -- Implemented multiple Messages resources. Each daemon has - its own message resource, which defaults if not defined. - Jobs may now have different message handlers. -- Cleaned up a bit of duplicate code in backup, verify, and - restore by creating appropriate subroutines in job.c -- Added Type, Client, FileSet, and Level resource record - definitions to the Director. These can be used in place - of the Backup = ..., Verify = ..., ... commands. This needs - documenting. -- Corrected an incorrect message in the prune code and added - the number of Files pruned in the message. -- Corrected several paint problems with gnome-console. -- Added a bit of printout in signal handler during traceback. -- Cleaned up most of sm_check() to be turned on/off by define - in version.h - -=========================================================================== -2002-05-10 Release 1.19 -- Allow the user to select a new period for pruning. -- Lots of additions to the manual -- prune and purge - commands documented. -- Applied Phil's configure.in fix for --prefix, ... -- Fixed bug found by Phil (patch supplied) in updating - MD5 signatures (revert to 32 bit FileId, move "static" - variables into JCR) (catreq.c fd-cmds.c). -- Reverted to using INTEGER for FileId in make_sql_tables - due to a bug in MySQL. -- Change editing code to %d for FileId. -- Remove sqlite in make distclean in cats directory. -- Remove console.conf in console during make distclean. -- Remove gnome-console.conf during make distclean. -- Remove bacula-dir.conf during make distclean. -- Set default level when using Console if none specified. - Bug reported by Phil. -- A simple . command from Console is ignored. -- Change program named from filed to bacual-fd in winmain.cpp -- Change default config file for Win32 in winmain.cpp -- Free namebuf on early return from find_one.c. Bug reported by Phil. -- Modify testfind.c to dump orphaned buffers. -- Removed terabytes from parse_conf.c because of problems with - older gcc compilers. -- Turn off gnome options in gnome-console by constructing empty argv. -- Fixes to Verify when only MD5 differs. -- Insert 0 for MD5 as default rather than space. -- Allow .messages "transparent" command while reading input - in UserAgent server. -- In dird/verify.c ensure that correct filename is printed if only - the MD5 differs. Minor reindenting caused large diff. -- Delete unused code from backup.c -- In filed/verify.c ensure that same algorithm as backup.c is used - to pass back MD5 signatures -- especially for directories and files - that cannot be read. Change dummy filename from X to *MD5-id*. - This dummy value should never be printed. -- Make gnome-console poll Director every 5 seconds for output. - This means that queued up messages are displayed at reasonable - intervals. Delete some unused code hanging around from the tty - console program. -- Begin implementation of prune commands. -- Add command line history to gnome-console. Not yet saved across sessions. -- Fixed some broken URLs in the manual. -- Added JobId type. -- Wrote first cut of "prune files" and "prune jobs". -- Added command line history to gnome-console 2500 lines max. -- Widened store_time() and associated variables to 64 bits using - new btime_t definition. -- Removed GNOME about box and replaced it with - a somewhat crude Gtk+ about box in the gnome-console. -- Widened StartDay in the Job DB record to be 64 bits. -- Changed edit_uint_ to edit_uint64_ everywhere. Much more - descriptive of what is done. -- Removed most llds and replaced them with %s and edit_uint64. - This makes the code a bit easier to read for beginners. -- Added a btime_t typedef which is 64 bits wide. -- Added most of the code needed to do Purge and Prune of - database. Not yet tested. Please do not use. -- Additional config options for Console. -- Started adding code for Automatic Recycling of Volumes. -- Allow arbitrary length filenames in Verify code. -- Fix incorrect filename in Verify code. -- Significant enhancement to number scanning in config parser. -- Requires initializing MySQL tables, or applying cats/alter.sql - to modify Media table. -- Modified Makefile to printer a much more visible - message if the make ends in error. -- Added the Purge value to the VolStatus in the Media table. - This value is set if the Volume is purged. -- Enhanced the db_delete_media_record() routine to delete - all associated records in the database. -- Modified Console to always write to the variable "output" - rather than stdout. This will permit directing output to a file. -- Enhanced the Console configuration file to have a Console - resource. This will allow us to add an rcfile and history file. -- Modified Find_next_vol in catreq.c to search for "Recycle" - volumes if there are none marked Append. Also made Get_Vol_info - return the VolStatus to the Storage daemon. -- Allow upper/lower case match on job level names. -- Added another warning message to the Console "delete media" command. -- Corrected a number of FileId types from uint64_t to FileId_t in - ua_retention.c. -- In ua server close database before freeing JCR (because pointer is - kept in ua and jcr structures). -- parse all numbers as doubles. Do lots of checking for valid number - formats. Allow numbers in scientific form (e.g. 1.5e+10). -- Remove terabyte modifier as it doesn't work in some compilers. -- Fix bug in handling some modifiers. -- Added all necessary code for Recycle to Storage daemon. A Volume - marked Recycle will now be overwritten. -- Filled out the prune command a bit and did some testing. -- Make console accept redirected input. -- Altered the Table definitions to include Recycle, - FileRetention, JobRetention, and AutoPrune. -- Widened StartDay to 64 bits. -- Use JobId_t in more places. -- Added the new table fields to the database record definitions. -- Changed Recycle from string to a binary quantity. -- Added a Version table with a VersionId to detect. - future changes in the database. This should prevent - a Bacula from working with a database that is not in sync. -- Modify Console to accept input from a file. This will permit - the .read command and allow reading a .rc file. -- Added new retention and recycle variables to the Director's configuration. -- The UA subroutines or commands can now be called from core - code because the output routines detect the absence of a - UA socket and direct output to the Job. -- Added a verbose flage to the ua packet to permit reduction of - output while running a UA command (prune) from a Job. -- Did a fair amount of work on the prune command. Prune Volume now works. -- Purge Volume now works. -- Made last changes for integrating prune and purge commands. -- Add -ltermcap to CONS_LIBS when readline is configured. - More work to be done to search for termcap. -- Added cats/drop_sqlite_tables.in, which will delete the SQLite database. -- Got CWEB working so that we can compile filesys.w and immortal.w -- Modified depkgs to include cweb. -- Note, CWEB is not yet used by the core Bacula code. -- Made cats/alter.sql, which alters an old database to bring it - up to the new format. This only works with MySQL since SQLite does - not have the ALTER SQL command. -- Changed the old StartDay field in the db to be JobTDate, which is - the latest time/date in widened Unix time format that the Job ran. - This value is used when doing pruning. -- Added code in cats/sql.c to verify that the database internal version - corresponds to the db version compiled in Bacula. It is set to 1 currently. -- Lots of changes to cats to bring the SQL up to date with the new - retention period changes. -- Added Console command code to permit changing a Volume's retention period. -- Removed old code that used date_encode() and replaced it with widened - Unix time(). -- Started modifying Message resource scanner so that we can have multiple - message resources. Much more work to be done. -- Moved scanning for time into new library routine string_to_btime(). - -=========================================================================== -2002-04-22 Release 1.18 -- Applied Phil's configure.in fix for --prefix, ... -- Fixed bug found by Phil (patch supplied) in updating - MD5 signatures (revert to 32 bit FileId, move "static" - variables into JCR) (catreq.c fd-cmds.c). -- Reverted to using INTEGER for FileId in make_sql_tables - due to a bug in MySQL. -- Change editing code to %d for FileId. -- Remove sqlite in make distclean in cats directory. -- Remove console.conf in console during make distclean -- Remove gnome-console.conf during make distclean -- Remove bacula-dir.conf during make distclean -- Set default level when using Console if none specified. - Bug reported by Phil. -- A simple . command from Console is ignored. -- Change program named from filed to bacual-fd in winmain.cpp -- Change default config file for Win32 in winmain.cpp -- Free namebuf on early return from find_one.c. Bug reported by - Phil. -- Modify testfind.c to dump orphaned buffers. -- Removed terabytes from parse_conf.c because of problems with - older gcc compilers. -- Turn off gnome options in gnome-console by constructing empty - argv. - -=========================================================================== -2002-04-18 Release 1.17 Kern Sibbald -- Ensure that platforms Makefiles are called for clean - and distclean. -- Hide a lot of Makefile messages with @ -- Applied Phil's configure.in patch. Thanks. -- Doc updates, many to clarify points brought up by Phil. -- Applied Phil's make_mysql_tables.in patch. Thanks. -- Made authenticate.c in dird test bnet_send status. -- Make label a bit more friendly with extra info message. -- Add level 200 to debug info in run command. -- Remove old code from findlib/testfind.c so that it compiles. -- Add two minute max wait to cram-md5 authentication. Hopefully, - this will catch non-responding WinNT daemons. -- Allow time and size modifiers to be upper or lower case. -- Turn off old CYGWIN patch for pthread_cond_timedwait() bug that - now causes File daemon hangs on WinNT. -- Fix mount messages for restore. Previous updates to save - broke the restore code. -- By default write fixed block sizes rather than variable block - sizes. My Sony DAT simply does not work (reread failures) with - variable block sizes. -- Data split across tapes was not being correctly restored - (at least on DAT tapes). -- Implement MaximumBlockSize and MinumBlockSize statements in - Storage daemon so user can specify variable block sizes if - desired. -- Return error if block checksum error on read (previously - ignored). -- Fixed some error messages in bls, and in some cases exit(1) - rather than ABORT. There remain ABORTs to be examined. -- Made a local copy of tcpd.h and corrected the function - prototype problem for C++. - -=========================================================================== -2002-04-14 First public release 1.16 Kern Sibbald - - Many intervening changes/updates. - -2001-09-29 Release 1.0 Kern Sibbald - - Fixes to problems found at John's installation. - - See techlogs/kes25Sep01 for details - -2001-09-25 Release 1.0 Kern Sibbald - - Helped John install at his site. - He is backing up one Linux machine and - one Win2000 machine. - -2001-mm-dd Many releases - - Released internally. - -2000-04-09 Release 0.4 Kern Sibbald - - Added a lot of Director configuration code. In - part (a small part), the Director now uses the - bacula.conf file to know what to do. There still - remains a lot to do. - - The file search code is now integrated into the - MySQL database routines, and Bacula is now hooked - into the MySQL database (if so configured). Thus - all the database records are being created, though - there still remains some work in getting all the - details into the records (such as the Storage - coordinates). - - I've defined how Volume pools work (see manual). - - I've defined error message handling though no code - is yet written. - - The following resources and records are implemented - in the Director configuration file (bacula.conf): - - Director - Name (passed to Storage daemon) - Client - Name, Address, Port - Password (not yet used) - Storage - Name, Address, Port, Password, MediaType - Job - Name - Type (not yet used) - Backup (only one permitted) - Client, FileSet - Storage - Schedule, Messages, Pool (not used) - FileSet - Name - Include (options ignored) - Exclude (no options) - Schedule (not used) - Name - Messages (not used) - Name - Debug, syslog, mail, append (not used) - Catalog - Name - Address, Port, Password (not used) - Pool (not used) - Name - PoolType, MediaType (not used) - - - Added Storage configuration routines. - Director - Name, password (verified against those sent by Director) - Storage - Name, Address, Port (address, port must correspond to Director's values) - Password, MediaType - Device - Name, MediaType (must correspond to those sent by Director) - Archive Device (defines device name) - - -2000-03-10 Release 0.3 Kern Sibbald - - Implemented new base64 encoding for attributes. - This eliminates some of the error messages in the - sprintfs on the Solaris due to different stat() sizes. - - Implemented the first cut of the file search routines for - the File daemon. The exclusion lists work including wild - cards. There is a lot of work to be done, but the basic - structure is now in place (wild cards do not yet work for - the include). - - Completed writing the memory pool code. Now I must - implement it in the daemons. - - Modified the bacula start/stop script so that it has a - better chance of working on SGI and Solaris. - - The catalog code has not been converted to the new file - search code. - -2000-03-06 Release 0.2 Kern Sibbald - - Integrated John's fixes. - - Made Makefiles self configuring when Makefile.in is changed. - - Added a runit script in the top level that runs bacula - - Added a "bacula" script in the top level directory that - starts and stops the File daemon and the Storage daemon. - -2000-03-03 Release 0.1 Kern Sibbald - - Basic Director, File, and Storage daemons. - Standalone Catalog services using MySQL - -2000-01-22 Kern Sibbald - * Setup basic file structure with ./configure -- 2.39.5