From 89e5440ef778cdcba13aa4bd5ea769efd99d84dc Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 2 Oct 2016 18:01:09 -0600 Subject: [PATCH] README: Drop README.imx31 The only content of this file is CONFIG options which are no-longer present in U-Boot. Drop it. Signed-off-by: Simon Glass Reviewed-by: Bin Meng Reviewed-by: York Sun --- doc/README.imx31 | 29 ----------------------------- 1 file changed, 29 deletions(-) delete mode 100644 doc/README.imx31 diff --git a/doc/README.imx31 b/doc/README.imx31 deleted file mode 100644 index 91ef766884..0000000000 --- a/doc/README.imx31 +++ /dev/null @@ -1,29 +0,0 @@ -U-Boot for Freescale i.MX31 - -This file contains information for the port of U-Boot to the Freescale -i.MX31 SoC. - -1. CONFIGURATION OPTIONS/SETTINGS ---------------------------------- - -1.1 Configuration of MC13783 SPI bus ------------------------------------- - The power management companion chip MC13783 is connected to the - i.MX31 via an SPI bus. Use the following configuration options - to setup the bus and chip select used for a particular board. - - CONFIG_MC13783_SPI_BUS -- defines the SPI bus the MC13783 is connected to. - Note that 0 is CSPI1, 1 is CSPI2 and 2 is CSPI3. - CONFIG_MC13783_SPI_CS -- define the chip select the MC13783 s connected to. - -1.2 Timer precision -------------------- - CONFIG_MX31_TIMER_HIGH_PRECISION - - Enable higher precision timer. The low-precision timer - (default) provides approximately 4% error, whereas the - high-precision timer is about 0.4% accurate. The extra - accuracy is achieved at the cost of higher computational - overhead, which, in places where time is measured, should - not be critical, so, it should be safe to enable this - option. -- 2.39.5