From 8a954eb695326eb406c4a548bb686190fea82bca Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Thu, 30 Jul 2015 18:55:20 +0100 Subject: [PATCH] hisilicon: hi6220: Add a hi6220 pinmux driver. This patch adds basic pinmux support for the hi6220 SoC, which is found on the hikey board. Signed-off-by: Peter Griffin --- arch/arm/cpu/armv8/Makefile | 1 + arch/arm/cpu/armv8/hisilicon/Makefile | 8 + arch/arm/cpu/armv8/hisilicon/pinmux.c | 184 ++++++++++++++++++++++ arch/arm/include/asm/arch-hi6220/periph.h | 30 ++++ arch/arm/include/asm/arch-hi6220/pinmux.h | 82 ++++++++++ 5 files changed, 305 insertions(+) create mode 100644 arch/arm/cpu/armv8/hisilicon/Makefile create mode 100644 arch/arm/cpu/armv8/hisilicon/pinmux.c create mode 100644 arch/arm/include/asm/arch-hi6220/periph.h create mode 100644 arch/arm/include/asm/arch-hi6220/pinmux.h diff --git a/arch/arm/cpu/armv8/Makefile b/arch/arm/cpu/armv8/Makefile index 6466ebb460..adb11b3bda 100644 --- a/arch/arm/cpu/armv8/Makefile +++ b/arch/arm/cpu/armv8/Makefile @@ -17,3 +17,4 @@ obj-y += transition.o obj-$(CONFIG_FSL_LSCH3) += fsl-lsch3/ obj-$(CONFIG_ARCH_ZYNQMP) += zynqmp/ +obj-$(CONFIG_TARGET_HIKEY) += hisilicon/ diff --git a/arch/arm/cpu/armv8/hisilicon/Makefile b/arch/arm/cpu/armv8/hisilicon/Makefile new file mode 100644 index 0000000000..2c9aefe42d --- /dev/null +++ b/arch/arm/cpu/armv8/hisilicon/Makefile @@ -0,0 +1,8 @@ +# +# (C) Copyright 2015 Linaro +# Peter Griffin +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += pinmux.o diff --git a/arch/arm/cpu/armv8/hisilicon/pinmux.c b/arch/arm/cpu/armv8/hisilicon/pinmux.c new file mode 100644 index 0000000000..3e4c9cec31 --- /dev/null +++ b/arch/arm/cpu/armv8/hisilicon/pinmux.c @@ -0,0 +1,184 @@ +/* + * Copyright (C) 2015 Linaro. + * Peter Griffin + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +struct hi6220_pinmux0_regs *pmx0 = + (struct hi6220_pinmux0_regs *)HI6220_PINMUX0_BASE; + +struct hi6220_pinmux1_regs *pmx1 = + (struct hi6220_pinmux1_regs *)HI6220_PINMUX1_BASE; + +static void hi6220_uart_config(int peripheral) +{ + switch (peripheral) { + case PERIPH_ID_UART0: + writel(MUX_M0, &pmx0->iomg[48]); /* UART0_RXD */ + writel(MUX_M0, &pmx0->iomg[49]); /* UART0_TXD */ + + writel(DRIVE1_02MA | PULL_UP, &pmx1->iocfg[49]); /* UART0_RXD */ + writel(DRIVE1_02MA | PULL_UP, &pmx1->iocfg[50]); /* UART0_TXD */ + break; + + case PERIPH_ID_UART1: + writel(MUX_M0, &pmx0->iomg[50]); /* UART1_CTS_N */ + writel(MUX_M0, &pmx0->iomg[51]); /* UART1_RTS_N */ + writel(MUX_M0, &pmx0->iomg[52]); /* UART1_RXD */ + writel(MUX_M0, &pmx0->iomg[53]); /* UART1_TXD */ + + writel(DRIVE1_02MA | PULL_UP, &pmx1->iocfg[51]); /*UART1_CTS_N*/ + writel(DRIVE1_02MA | PULL_UP, &pmx1->iocfg[53]); /* UART1_RXD */ + writel(DRIVE1_02MA, &pmx1->iocfg[52]); /* UART1_RTS_N */ + writel(DRIVE1_02MA, &pmx1->iocfg[54]); /* UART1_TXD */ + break; + + case PERIPH_ID_UART2: + writel(MUX_M0, &pmx0->iomg[54]); /* UART2_CTS_N */ + writel(MUX_M0, &pmx0->iomg[55]); /* UART2_RTS_N */ + writel(MUX_M0, &pmx0->iomg[56]); /* UART2_RXD */ + writel(MUX_M0, &pmx0->iomg[57]); /* UART2_TXD */ + + writel(DRIVE1_02MA, &pmx1->iocfg[55]); /* UART2_CTS_N */ + writel(DRIVE1_02MA, &pmx1->iocfg[56]); /* UART2_RTS_N */ + writel(DRIVE1_02MA, &pmx1->iocfg[57]); /* UART2_RXD */ + writel(DRIVE1_02MA, &pmx1->iocfg[58]); /* UART2_TXD */ + break; + + case PERIPH_ID_UART3: + writel(MUX_M1, &pmx0->iomg[96]); /* UART3_CTS_N */ + writel(MUX_M1, &pmx0->iomg[97]); /* UART3_RTS_N */ + writel(MUX_M1, &pmx0->iomg[98]); /* UART3_RXD */ + writel(MUX_M1, &pmx0->iomg[99]); /* UART3_TXD */ + + /* UART3_TXD */ + writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[100]); + /* UART3_RTS_N */ + writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[101]); + /* UART3_RXD */ + writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[102]); + /* UART3_TXD */ + writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[103]); + break; + + case PERIPH_ID_UART4: + writel(MUX_M1, &pmx0->iomg[116]); /* UART4_CTS_N */ + writel(MUX_M1, &pmx0->iomg[117]); /* UART4_RTS_N */ + writel(MUX_M1, &pmx0->iomg[118]); /* UART4_RXD */ + writel(MUX_M1, &pmx0->iomg[119]); /* UART4_TXD */ + + /* UART4_CTS_N */ + writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[120]); + /* UART4_RTS_N */ + writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[121]); + /* UART4_RXD */ + writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[122]); + /* UART4_TXD */ + writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[123]); + break; + case PERIPH_ID_UART5: + writel(MUX_M1, &pmx0->iomg[114]); /* UART5_RXD */ + writel(MUX_M1, &pmx0->iomg[115]); /* UART5_TXD */ + + /* UART5_RXD */ + writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[118]); + /* UART5_TXD */ + writel(DRIVE1_02MA | PULL_DOWN, &pmx1->iocfg[119]); + + break; + + default: + debug("%s: invalid peripheral %d", __func__, peripheral); + return; + } +} + +static int hi6220_mmc_config(int peripheral) +{ + u32 tmp; + + switch (peripheral) { + case PERIPH_ID_SDMMC0: + + /* eMMC pinmux config */ + writel(MUX_M0, &pmx0->iomg[64]); /* EMMC_CLK */ + writel(MUX_M0, &pmx0->iomg[65]); /* EMMC_CMD */ + writel(MUX_M0, &pmx0->iomg[66]); /* EMMC_DATA0 */ + writel(MUX_M0, &pmx0->iomg[67]); /* EMMC_DATA1 */ + writel(MUX_M0, &pmx0->iomg[68]); /* EMMC_DATA2 */ + writel(MUX_M0, &pmx0->iomg[69]); /* EMMC_DATA3 */ + writel(MUX_M0, &pmx0->iomg[70]); /* EMMC_DATA4 */ + writel(MUX_M0, &pmx0->iomg[71]); /* EMMC_DATA5 */ + writel(MUX_M0, &pmx0->iomg[72]); /* EMMC_DATA6 */ + writel(MUX_M0, &pmx0->iomg[73]); /* EMMC_DATA7 */ + + /*eMMC configure up/down/drive */ + writel(DRIVE1_08MA, &pmx1->iocfg[65]); /* EMMC_CLK */ + + tmp = DRIVE1_04MA | PULL_UP; + writel(tmp, &pmx1->iocfg[65]); /* EMMC_CMD */ + writel(tmp, &pmx1->iocfg[66]); /* EMMC_DATA0 */ + writel(tmp, &pmx1->iocfg[67]); /* EMMC_DATA1 */ + writel(tmp, &pmx1->iocfg[68]); /* EMMC_DATA2 */ + writel(tmp, &pmx1->iocfg[69]); /* EMMC_DATA3 */ + writel(tmp, &pmx1->iocfg[70]); /* EMMC_DATA4 */ + writel(tmp, &pmx1->iocfg[71]); /* EMMC_DATA5 */ + writel(tmp, &pmx1->iocfg[72]); /* EMMC_DATA6 */ + writel(tmp, &pmx1->iocfg[73]); /* EMMC_DATA7 */ + + writel(DRIVE1_04MA, &pmx1->iocfg[73]); /* EMMC_RST_N */ + break; + + case PERIPH_ID_SDMMC1: + + writel(MUX_M0, &pmx0->iomg[3]); /* SD_CLK */ + writel(MUX_M0, &pmx0->iomg[4]); /* SD_CMD */ + writel(MUX_M0, &pmx0->iomg[5]); /* SD_DATA0 */ + writel(MUX_M0, &pmx0->iomg[6]); /* SD_DATA1 */ + writel(MUX_M0, &pmx0->iomg[7]); /* SD_DATA2 */ + writel(MUX_M0, &pmx0->iomg[8]); /* SD_DATA3 */ + + writel(DRIVE1_10MA | BIT(2), &pmx1->iocfg[3]); /*SD_CLK*/ + writel(DRIVE1_08MA | BIT(2), &pmx1->iocfg[4]); /*SD_CMD*/ + writel(DRIVE1_08MA | BIT(2), &pmx1->iocfg[5]); /*SD_DATA0*/ + writel(DRIVE1_08MA | BIT(2), &pmx1->iocfg[6]); /*SD_DATA1*/ + writel(DRIVE1_08MA | BIT(2), &pmx1->iocfg[7]); /*SD_DATA2*/ + writel(DRIVE1_08MA | BIT(2), &pmx1->iocfg[8]); /*SD_DATA3*/ + break; + + default: + debug("%s: invalid peripheral %d", __func__, peripheral); + return -1; + } + + return 0; +} + +int hi6220_pinmux_config(int peripheral) +{ + switch (peripheral) { + case PERIPH_ID_UART0: + case PERIPH_ID_UART1: + case PERIPH_ID_UART2: + case PERIPH_ID_UART3: + hi6220_uart_config(peripheral); + break; + case PERIPH_ID_SDMMC0: + case PERIPH_ID_SDMMC1: + return hi6220_mmc_config(peripheral); + default: + debug("%s: invalid peripheral %d", __func__, peripheral); + return -1; + } + + return 0; +} + + diff --git a/arch/arm/include/asm/arch-hi6220/periph.h b/arch/arm/include/asm/arch-hi6220/periph.h new file mode 100644 index 0000000000..7155f60b34 --- /dev/null +++ b/arch/arm/include/asm/arch-hi6220/periph.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2015 Linaro + * Peter Griffin + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARM_ARCH_PERIPH_H +#define __ASM_ARM_ARCH_PERIPH_H + +/* + * Peripherals required for pinmux configuration. List will + * grow with support for more devices getting added. + * Numbering based on interrupt table. + * + */ +enum periph_id { + PERIPH_ID_UART0 = 36, + PERIPH_ID_UART1, + PERIPH_ID_UART2, + PERIPH_ID_UART3, + PERIPH_ID_UART4, + PERIPH_ID_UART5, + PERIPH_ID_SDMMC0 = 72, + PERIPH_ID_SDMMC1, + + PERIPH_ID_NONE = -1, +}; + +#endif /* __ASM_ARM_ARCH_PERIPH_H */ diff --git a/arch/arm/include/asm/arch-hi6220/pinmux.h b/arch/arm/include/asm/arch-hi6220/pinmux.h new file mode 100644 index 0000000000..1dd5f9b0fe --- /dev/null +++ b/arch/arm/include/asm/arch-hi6220/pinmux.h @@ -0,0 +1,82 @@ +/* + * Copyright (C) 2015 Linaro + * Peter Griffin + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARM_ARCH_PINMUX_H +#define __ASM_ARM_ARCH_PINMUX_H + +#include "periph.h" + + +/* iomg bit definition */ +#define MUX_M0 0 +#define MUX_M1 1 +#define MUX_M2 2 +#define MUX_M3 3 +#define MUX_M4 4 +#define MUX_M5 5 +#define MUX_M6 6 +#define MUX_M7 7 + +/* iocg bit definition */ +#define PULL_MASK (3) +#define PULL_DIS (0) +#define PULL_UP (1 << 0) +#define PULL_DOWN (1 << 1) + +/* drive strength definition */ +#define DRIVE_MASK (7 << 4) +#define DRIVE1_02MA (0 << 4) +#define DRIVE1_04MA (1 << 4) +#define DRIVE1_08MA (2 << 4) +#define DRIVE1_10MA (3 << 4) +#define DRIVE2_02MA (0 << 4) +#define DRIVE2_04MA (1 << 4) +#define DRIVE2_08MA (2 << 4) +#define DRIVE2_10MA (3 << 4) +#define DRIVE3_04MA (0 << 4) +#define DRIVE3_08MA (1 << 4) +#define DRIVE3_12MA (2 << 4) +#define DRIVE3_16MA (3 << 4) +#define DRIVE3_20MA (4 << 4) +#define DRIVE3_24MA (5 << 4) +#define DRIVE3_32MA (6 << 4) +#define DRIVE3_40MA (7 << 4) +#define DRIVE4_02MA (0 << 4) +#define DRIVE4_04MA (2 << 4) +#define DRIVE4_08MA (4 << 4) +#define DRIVE4_10MA (6 << 4) + +#define HI6220_PINMUX0_BASE 0xf7010000 +#define HI6220_PINMUX1_BASE 0xf7010800 + +#ifndef __ASSEMBLY__ + +/* maybe more registers, but highest used is 123 */ +#define REG_NUM 123 + +struct hi6220_pinmux0_regs { + uint32_t iomg[REG_NUM]; +}; + +struct hi6220_pinmux1_regs { + uint32_t iocfg[REG_NUM]; +}; + +#endif + +/** + * Configures the pinmux for a particular peripheral. + * + * This function will configure the peripheral pinmux along with + * pull-up/down and drive strength. + * + * @param peripheral peripheral to be configured + * @return 0 if ok, -1 on error (e.g. unsupported peripheral) + */ +int hi6220_pinmux_config(int peripheral); + +#endif -- 2.39.5