From 8b07a1103dc7dcadc80c4a9681cfa7d225e8e224 Mon Sep 17 00:00:00 2001 From: wdenk Date: Sat, 10 Jul 2004 21:45:47 +0000 Subject: [PATCH] * Patch by Fred Klatt, 25 Jun 2004: Add support for WindRiver's SBC8560 board * Patch by Nicolas Lacressonniere, 24 Jun 2004 Small Bugs fixes for "at91rm9200dk" board: - Timing modifications for SPI DataFlash access - Fix NAND flash detection bug * Patch by Nicolas Lacressonniere, 24 Jun 2004: Add Support for Flash AT49BV6416 for AT91RM9200DK board --- CHANGELOG | 11 + MAKEALL | 2 +- Makefile | 11 + README | 58 +-- board/at91rm9200dk/at91rm9200dk.c | 4 + board/at91rm9200dk/flash.c | 98 ++-- board/sbc8560/Makefile | 51 +++ board/sbc8560/config.mk | 35 ++ board/sbc8560/init.S | 165 +++++++ board/sbc8560/sbc8560.c | 449 +++++++++++++++++++ board/sbc8560/u-boot.lds | 154 +++++++ common/cmd_nand.c | 4 + cpu/at91rm9200/at45.c | 15 +- cpu/mpc85xx/tsec.c | 11 +- doc/README.sbc8560 | 53 +++ examples/Makefile | 2 +- include/asm-arm/arch-at91rm9200/AT91RM9200.h | 2 + include/configs/SBC8560.h | 398 ++++++++++++++++ include/configs/at91rm9200dk.h | 101 +++-- include/flash.h | 3 +- 20 files changed, 1505 insertions(+), 122 deletions(-) create mode 100644 board/sbc8560/Makefile create mode 100644 board/sbc8560/config.mk create mode 100644 board/sbc8560/init.S create mode 100644 board/sbc8560/sbc8560.c create mode 100644 board/sbc8560/u-boot.lds create mode 100644 doc/README.sbc8560 create mode 100644 include/configs/SBC8560.h diff --git a/CHANGELOG b/CHANGELOG index 33fafcbb0e..5e6468eef1 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,17 @@ Changes since U-Boot 1.1.1: ====================================================================== +* Patch by Fred Klatt, 25 Jun 2004: + Add support for WindRiver's SBC8560 board + +* Patch by Nicolas Lacressonniere, 24 Jun 2004 + Small Bugs fixes for "at91rm9200dk" board: + - Timing modifications for SPI DataFlash access + - Fix NAND flash detection bug + +* Patch by Nicolas Lacressonniere, 24 Jun 2004: + Add Support for Flash AT49BV6416 for AT91RM9200DK board + * Patch by Jon Loeliger, 17 June 2004: Completion of the 8540ADS/8560ADS updates: Fix some PCI and Rapid I/O memory maps, diff --git a/MAKEALL b/MAKEALL index d35042fb92..a0ae7856d9 100644 --- a/MAKEALL +++ b/MAKEALL @@ -98,7 +98,7 @@ LIST_8260=" \ ######################################################################### LIST_85xx=" \ - MPC8540ADS MPC8560ADS stxgp3 \ + MPC8540ADS MPC8560ADS SBC8560 stxgp3 \ " ######################################################################### diff --git a/Makefile b/Makefile index 26dddb9a20..516ae69a7c 100644 --- a/Makefile +++ b/Makefile @@ -1010,6 +1010,17 @@ MPC8560ADS_config: unconfig stxgp3_config: unconfig @./mkconfig $(@:_config=) ppc mpc85xx stxgp3 +SBC8560_33_config \ +SBC8560_66_config: unconfig + @if [ "$(findstring _66_,$@)" ] ; then \ + echo "#define CONFIG_PCI_66" >>include/config.h ; \ + echo "... 66 MHz PCI" ; \ + else \ + >include/config.h ; \ + echo "... 33 MHz PCI" ; \ + fi + @./mkconfig -a SBC8560 ppc mpc85xx sbc8560 + ######################################################################### ## 74xx/7xx Systems ######################################################################### diff --git a/README b/README index faa5ec4870..8b545f822a 100644 --- a/README +++ b/README @@ -269,24 +269,24 @@ The following options need to be configured: CONFIG_CSB272 CONFIG_JSE CONFIG_Sandpoint8240 CONFIG_CU824 CONFIG_LANTEC CONFIG_Sandpoint8245 CONFIG_DASA_SIM CONFIG_lwmon CONFIG_sbc8260 - CONFIG_DB64360 CONFIG_MBX CONFIG_SM850 - CONFIG_DB64460 CONFIG_MBX860T CONFIG_SPD823TS - CONFIG_DU405 CONFIG_MHPC CONFIG_STXGP3 - CONFIG_DUET_ADS CONFIG_MIP405 CONFIG_SXNI855T - CONFIG_EBONY CONFIG_MOUSSE CONFIG_TQM823L - CONFIG_ELPPC CONFIG_MPC8260ADS CONFIG_TQM8260 - CONFIG_ELPT860 CONFIG_MPC8540ADS CONFIG_TQM850L - CONFIG_ep8260 CONFIG_MPC8560ADS CONFIG_TQM855L - CONFIG_ERIC CONFIG_MUSENKI CONFIG_TQM860L - CONFIG_ESTEEM192E CONFIG_MVS1 CONFIG_TTTech - CONFIG_ETX094 CONFIG_NETPHONE CONFIG_UTX8245 - CONFIG_EVB64260 CONFIG_NETTA CONFIG_V37 - CONFIG_FADS823 CONFIG_NETVIA CONFIG_W7OLMC - CONFIG_FADS850SAR CONFIG_NX823 CONFIG_W7OLMG - CONFIG_FADS860T CONFIG_OCRTC CONFIG_WALNUT405 - CONFIG_FLAGADM CONFIG_ORSG CONFIG_ZPC1900 - CONFIG_FPS850L CONFIG_OXC CONFIG_ZUMA - CONFIG_FPS860L + CONFIG_DB64360 CONFIG_MBX CONFIG_sbc8560 + CONFIG_DB64460 CONFIG_MBX860T CONFIG_SM850 + CONFIG_DU405 CONFIG_MHPC CONFIG_SPD823TS + CONFIG_DUET_ADS CONFIG_MIP405 CONFIG_STXGP3 + CONFIG_EBONY CONFIG_MOUSSE CONFIG_SXNI855T + CONFIG_ELPPC CONFIG_MPC8260ADS CONFIG_TQM823L + CONFIG_ELPT860 CONFIG_MPC8540ADS CONFIG_TQM8260 + CONFIG_ep8260 CONFIG_MPC8560ADS CONFIG_TQM850L + CONFIG_ERIC CONFIG_MUSENKI CONFIG_TQM855L + CONFIG_ESTEEM192E CONFIG_MVS1 CONFIG_TQM860L + CONFIG_ETX094 CONFIG_NETPHONE CONFIG_TTTech + CONFIG_EVB64260 CONFIG_NETTA CONFIG_UTX8245 + CONFIG_FADS823 CONFIG_NETVIA CONFIG_V37 + CONFIG_FADS850SAR CONFIG_NX823 CONFIG_W7OLMC + CONFIG_FADS860T CONFIG_OCRTC CONFIG_W7OLMG + CONFIG_FLAGADM CONFIG_ORSG CONFIG_WALNUT405 + CONFIG_FPS850L CONFIG_OXC CONFIG_ZPC1900 + CONFIG_FPS860L CONFIG_ZUMA ARM based boards: ----------------- @@ -2091,16 +2091,18 @@ configurations; the following names are supported: CPCI405_config JSE_config rsdproto_config CPCIISER4_config LANTEC_config Sandpoint8240_config csb272_config lwmon_config sbc8260_config - CU824_config MBX860T_config SM850_config - DUET_ADS_config MBX_config SPD823TS_config - EBONY_config MPC8260ADS_config stxgp3_config - ELPT860_config MPC8540ADS_config SXNI855T_config - ESTEEM192E_config MPC8560ADS_config TQM823L_config - ETX094_config NETVIA_config TQM850L_config - FADS823_config omap1510inn_config TQM855L_config - FADS850SAR_config omap1610h2_config TQM860L_config - FADS860T_config omap1610inn_config WALNUT405_config - FPS850L_config omap5912osk_config ZPC1900_config + CU824_config MBX860T_config SBC8560_33_config + DUET_ADS_config MBX_config SBC8560_66_config + EBONY_config MPC8260ADS_config SM850_config + ELPT860_config MPC8540ADS_config SPD823TS_config + ESTEEM192E_config MPC8560ADS_config stxgp3_config + ETX094_config NETVIA_config SXNI855T_config + FADS823_config omap1510inn_config TQM823L_config + FADS850SAR_config omap1610h2_config TQM850L_config + FADS860T_config omap1610inn_config TQM855L_config + FPS850L_config omap5912osk_config TQM860L_config + WALNUT405_config + ZPC1900_config Note: for some board special configuration names may exist; check if additional information is available from the board vendor; for diff --git a/board/at91rm9200dk/at91rm9200dk.c b/board/at91rm9200dk/at91rm9200dk.c index 8a05c5321f..606ea48816 100644 --- a/board/at91rm9200dk/at91rm9200dk.c +++ b/board/at91rm9200dk/at91rm9200dk.c @@ -102,6 +102,10 @@ void nand_init (void) *AT91C_PIOB_PER = AT91C_PIO_PB1; /* enable direct output enable */ *AT91C_PIOB_ODR = AT91C_PIO_PB1; /* disable output */ + /* PIOB and PIOC clock enabling */ + *AT91C_PMC_PCER = 1 << AT91C_ID_PIOB; + *AT91C_PMC_PCER = 1 << AT91C_ID_PIOC; + if (*AT91C_PIOB_PDSR & AT91C_PIO_PB1) printf (" No SmartMedia card inserted\n"); #ifdef DEBUG diff --git a/board/at91rm9200dk/flash.c b/board/at91rm9200dk/flash.c index 9a67755dc3..5220fcf5d9 100644 --- a/board/at91rm9200dk/flash.c +++ b/board/at91rm9200dk/flash.c @@ -42,20 +42,22 @@ typedef struct OrgDef /* Flash Organizations */ OrgDef OrgAT49BV16x4[] = { - { 8, 8*1024 }, /* 8 * 8kBytes sectors */ - { 2, 32*1024 }, /* 2 * 32kBytes sectors */ - { 30, 64*1024 } /* 30 * 64kBytes sectors */ + { 8, 8*1024 }, /* 8 * 8 kBytes sectors */ + { 2, 32*1024 }, /* 2 * 32 kBytes sectors */ + { 30, 64*1024 }, /* 30 * 64 kBytes sectors */ }; OrgDef OrgAT49BV16x4A[] = { - { 8, 8*1024 }, /* 8 * 8kBytes sectors */ - { 31, 64*1024 } /* 31 * 64kBytes sectors */ + { 8, 8*1024 }, /* 8 * 8 kBytes sectors */ + { 31, 64*1024 }, /* 31 * 64 kBytes sectors */ }; - -#define FLASH_BANK_SIZE 0x200000 /* 2 MB */ -#define MAIN_SECT_SIZE 0x10000 /* 64 KB */ +OrgDef OrgAT49BV6416[] = +{ + { 8, 8*1024 }, /* 8 * 8 kBytes sectors */ + { 127, 64*1024 }, /* 127 * 64 kBytes sectors */ +}; flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; @@ -73,13 +75,11 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; #define CMD_ERASE_CONFIRM 0x0030 #define CMD_PROGRAM 0x00A0 #define CMD_UNLOCK_BYPASS 0x0020 +#define CMD_SECTOR_UNLOCK 0x0070 #define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00005555<<1))) #define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00002AAA<<1))) -#define IDENT_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x0000555<<1))) -#define IDENT_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x0000AAA<<1))) - #define BIT_ERASE_DONE 0x0080 #define BIT_RDY_MASK 0x0080 #define BIT_PROGRAM_ERROR 0x0020 @@ -95,17 +95,17 @@ void flash_identification (flash_info_t * info) { volatile u16 manuf_code, device_code, add_device_code; - IDENT_FLASH_ADDR1 = FLASH_CODE1; - IDENT_FLASH_ADDR2 = FLASH_CODE2; - IDENT_FLASH_ADDR1 = ID_IN_CODE; + MEM_FLASH_ADDR1 = FLASH_CODE1; + MEM_FLASH_ADDR2 = FLASH_CODE2; + MEM_FLASH_ADDR1 = ID_IN_CODE; manuf_code = *(volatile u16 *) CFG_FLASH_BASE; device_code = *(volatile u16 *) (CFG_FLASH_BASE + 2); add_device_code = *(volatile u16 *) (CFG_FLASH_BASE + (3 << 1)); - IDENT_FLASH_ADDR1 = FLASH_CODE1; - IDENT_FLASH_ADDR2 = FLASH_CODE2; - IDENT_FLASH_ADDR1 = ID_OUT_CODE; + MEM_FLASH_ADDR1 = FLASH_CODE1; + MEM_FLASH_ADDR2 = FLASH_CODE2; + MEM_FLASH_ADDR1 = ID_OUT_CODE; /* Vendor type */ info->flash_id = ATM_MANUFACT & FLASH_VENDMASK; @@ -117,14 +117,36 @@ void flash_identification (flash_info_t * info) (ATM_ID_BV1614A & FLASH_TYPEMASK)) { info->flash_id |= ATM_ID_BV1614A & FLASH_TYPEMASK; printf ("AT49BV1614A (16Mbit)\n"); + } else { /* AT49BV1614 Flash */ + info->flash_id |= ATM_ID_BV1614 & FLASH_TYPEMASK; + printf ("AT49BV1614 (16Mbit)\n"); } - } else { /* AT49BV1614 Flash */ - info->flash_id |= ATM_ID_BV1614 & FLASH_TYPEMASK; - printf ("AT49BV1614 (16Mbit)\n"); + } else if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV6416 & FLASH_TYPEMASK)) { + info->flash_id |= ATM_ID_BV6416 & FLASH_TYPEMASK; + printf ("AT49BV6416 (64Mbit)\n"); } } +ushort flash_number_sector(OrgDef *pOrgDef, unsigned int nb_blocks) +{ + int i, nb_sectors = 0; + + for (i=0; istart[sector]); + + MEM_FLASH_ADDR1 = CMD_UNLOCK1; + *addr = CMD_SECTOR_UNLOCK; +} + ulong flash_init (void) { @@ -140,23 +162,29 @@ ulong flash_init (void) flash_identification (&flash_info[i]); - flash_info[i].size = FLASH_BANK_SIZE; - if ((flash_info[i].flash_id & FLASH_TYPEMASK) == (ATM_ID_BV1614 & FLASH_TYPEMASK)) { - flash_info[i].sector_count = CFG_MAX_FLASH_SECT; - memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); pOrgDef = OrgAT49BV16x4; flash_nb_blocks = sizeof (OrgAT49BV16x4) / sizeof (OrgDef); - } else { /* AT49BV1614A Flash */ - flash_info[i].sector_count = CFG_MAX_FLASH_SECT - 1; - memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT - 1); + } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) == + (ATM_ID_BV1614A & FLASH_TYPEMASK)){ /* AT49BV1614A Flash */ pOrgDef = OrgAT49BV16x4A; flash_nb_blocks = sizeof (OrgAT49BV16x4A) / sizeof (OrgDef); + } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) == + (ATM_ID_BV6416 & FLASH_TYPEMASK)){ /* AT49BV6416 Flash */ + + pOrgDef = OrgAT49BV6416; + flash_nb_blocks = sizeof (OrgAT49BV6416) / sizeof (OrgDef); + } else { + flash_nb_blocks = 0; + pOrgDef = OrgAT49BV16x4; } + flash_info[i].sector_count = flash_number_sector(pOrgDef, flash_nb_blocks); + memset (flash_info[i].protect, 0, flash_info[i].sector_count); + if (i == 0) flashbase = PHYS_FLASH_1; else @@ -164,15 +192,26 @@ ulong flash_init (void) sector = 0; start_address = flashbase; + flash_info[i].size = 0; for (j = 0; j < flash_nb_blocks; j++) { for (k = 0; k < pOrgDef[j].sector_number; k++) { flash_info[i].start[sector++] = start_address; start_address += pOrgDef[j].sector_size; + flash_info[i].size += pOrgDef[j].sector_size; } } size += flash_info[i].size; + + if ((flash_info[i].flash_id & FLASH_TYPEMASK) == + (ATM_ID_BV6416 & FLASH_TYPEMASK)){ /* AT49BV6416 Flash */ + + /* Unlock all sectors at reset */ + for (j=0; j. +# Added support for Wind River SBC8560 board +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := $(BOARD).o +SOBJS := init.o +#SOBJS := + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) + +clean: + rm -f $(OBJS) $(SOBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/sbc8560/config.mk b/board/sbc8560/config.mk new file mode 100644 index 0000000000..c025a0eb9d --- /dev/null +++ b/board/sbc8560/config.mk @@ -0,0 +1,35 @@ +# Modified by Xianghua Xiao, X.Xiao@motorola.com +# (C) Copyright 2002,2003 Motorola Inc. +# +# (C) Copyright 2004 Wind River Systems Inc . +# Added support for Wind River SBC8560 board +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# based on mpc8560ads board +# default CCARBAR is at 0xff700000 +# assume U-Boot is less than 256K +# +TEXT_BASE = 0xfffc0000 + +PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1 +PLATFORM_CPPFLAGS += -DCONFIG_MPC8560=1 +PLATFORM_CPPFLAGS += -DCONFIG_E500=1 diff --git a/board/sbc8560/init.S b/board/sbc8560/init.S new file mode 100644 index 0000000000..3d8d180d84 --- /dev/null +++ b/board/sbc8560/init.S @@ -0,0 +1,165 @@ +/* +* Copyright (C) 2002,2003, Motorola Inc. +* Xianghua Xiao +* +* (C) Copyright 2004 Wind River Systems Inc . +* Added support for Wind River SBC8560 board +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#include +#include +#include +#include +#include +#include + +#define entry_start \ + mflr r1 ; \ + bl 0f ; + +#define entry_end \ +0: mflr r0 ; \ + mtlr r1 ; \ + blr ; + + +/* LAW(Local Access Window) configuration: + * 0000_0000-0800_0000: DDR(512M) -or- larger + * c000_0000-cfff_ffff: PCI(256M) + * d000_0000-dfff_ffff: RapidIO(256M) + * e000_0000-ffff_ffff: localbus(512M) + * e000_0000-e3ff_ffff: LBC 64M, 32-bit flash on CS6 + * e400_0000-e7ff_ffff: LBC 64M, 32-bit flash on CS1 + * e800_0000-efff_ffff: LBC 128M, nothing here + * f000_0000-f3ff_ffff: LBC 64M, SDRAM on CS3 + * f400_0000-f7ff_ffff: LBC 64M, SDRAM on CS4 + * f800_0000-fdff_ffff: LBC 64M, nothing here + * fc00_0000-fcff_ffff: LBC 16M, CSR,RTC,UART,etc on CS5 + * fd00_0000-fdff_ffff: LBC 16M, nothing here + * fe00_0000-feff_ffff: LBC 16M, nothing here + * ff00_0000-ff6f_ffff: LBC 7M, nothing here + * ff70_0000-ff7f_ffff: CCSRBAR 1M + * ff80_0000-ffff_ffff: LBC 8M, 8-bit flash on CS0 + * Note: CCSRBAR and L2-as-SRAM don't need configure Local Access + * Window. + * Note: If flash is 8M at default position(last 8M),no LAW needed. + */ + +#if !defined(CONFIG_SPD_EEPROM) + #define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff) + #define LAWAR0 (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_512M)) +#else + #define LAWBAR0 0 + #define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_512M)) & ~LAWAR_EN) +#endif + +#define LAWBAR1 ((CFG_PCI_MEM_BASE>>12) & 0xfffff) +#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_256M)) + +#define LAWBAR2 ((0xe0000000>>12) & 0xfffff) +#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_512M)) + + .section .bootpg, "ax" + .globl law_entry +law_entry: + entry_start + .long 0x03 + .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2 + entry_end + +/* TLB1 entries configuration: */ + + .section .bootpg, "ax" + .globl tlb1_entry + +tlb1_entry: + entry_start + + .long 0x08 /* the following data table uses a few of 16 TLB entries */ + +/* TLB for CCSRBAR (IMMR) */ + + .long TLB1_MAS0(1,1,0) + .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M) + .long TLB1_MAS2(((CFG_CCSRBAR>>12) & 0xfffff),0,0,0,0,1,0,1,0) + .long TLB1_MAS3(((CFG_CCSRBAR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1) + +/* TLB for Local Bus stuff, just map the whole 512M */ +/* note that the LBC SDRAM is cache-inhibit and guarded, like everything else */ + + .long TLB1_MAS0(1,2,0) + .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M) + .long TLB1_MAS2(((0xe0000000>>12) & 0xfffff),0,0,0,0,1,0,1,0) + .long TLB1_MAS3(((0xe0000000>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1) + + .long TLB1_MAS0(1,3,0) + .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M) + .long TLB1_MAS2(((0xf0000000>>12)&0xfffff),0,0,0,0,1,0,1,0) + .long TLB1_MAS3(((0xf0000000>>12)&0xfffff),0,0,0,0,0,1,0,1,0,1) + +#if !defined(CONFIG_SPD_EEPROM) + .long TLB1_MAS0(1,4,0) + .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M) + .long TLB1_MAS2(((CFG_DDR_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,0,0,0) + .long TLB1_MAS3(((CFG_DDR_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1) + + .long TLB1_MAS0(1,5,0) + .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M) + .long TLB1_MAS2((((CFG_DDR_SDRAM_BASE+0x10000000)>>12) & 0xfffff),0,0,0,0,0,0,0,0) + .long TLB1_MAS3((((CFG_DDR_SDRAM_BASE+0x10000000)>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1) +#else + .long TLB1_MAS0(1,4,0) + .long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M) + .long TLB1_MAS2(0,0,0,0,0,0,0,0,0) + .long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1) + + .long TLB1_MAS0(1,5,0) + .long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M) + .long TLB1_MAS2(0,0,0,0,0,0,0,0,0) + .long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1) +#endif + + .long TLB1_MAS0(1,6,0) + .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16K) +#ifdef CONFIG_L2_INIT_RAM + .long TLB1_MAS2(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,1,0,0,0,0) +#else + .long TLB1_MAS2(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,0,0,0,0,0) +#endif + .long TLB1_MAS3(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1) + + .long TLB1_MAS0(1,7,0) + .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M) + .long TLB1_MAS2(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0) + .long TLB1_MAS3(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1) + +#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR) + .long TLB1_MAS0(1,15,0) + .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M) + .long TLB1_MAS2(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,1,0,1,0) + .long TLB1_MAS3(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1) +#else + .long TLB1_MAS0(1,15,0) + .long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M) + .long TLB1_MAS2(0,0,0,0,0,0,0,0,0) + .long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1) +#endif + entry_end diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c new file mode 100644 index 0000000000..a784e3426a --- /dev/null +++ b/board/sbc8560/sbc8560.c @@ -0,0 +1,449 @@ +/* + * (C) Copyright 2003,Motorola Inc. + * Xianghua Xiao, (X.Xiao@motorola.com) + * + * (C) Copyright 2002 Scott McNutt + * + * (C) Copyright 2004 Wind River Systems Inc . + * Added support for Wind River SBC8560 board + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +extern long int spd_sdram (void); + +#include +#include +#include +#include +#include +#include + +long int fixed_sdram (void); + +/* + * I/O Port configuration table + * + * if conf is 1, then that port pin will be configured at boot time + * according to the five values podr/pdir/ppar/psor/pdat for that entry + */ + +const iop_conf_t iop_conf_tab[4][32] = { + + /* Port A configuration */ + { /* conf ppar psor pdir podr pdat */ + /* PA31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxENB */ + /* PA30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 TxClav */ + /* PA29 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxSOC */ + /* PA28 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 RxENB */ + /* PA27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxSOC */ + /* PA26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxClav */ + /* PA25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[0] */ + /* PA24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[1] */ + /* PA23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[2] */ + /* PA22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[3] */ + /* PA21 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[4] */ + /* PA20 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[5] */ + /* PA19 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[6] */ + /* PA18 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[7] */ + /* PA17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[7] */ + /* PA16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[6] */ + /* PA15 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[5] */ + /* PA14 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[4] */ + /* PA13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[3] */ + /* PA12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[2] */ + /* PA11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[1] */ + /* PA10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[0] */ + /* PA9 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 L1TXD */ + /* PA8 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 L1RXD */ + /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */ + /* PA6 */ { 0, 1, 1, 1, 0, 0 }, /* TDM A1 L1RSYNC */ + /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */ + /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */ + /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */ + /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */ + /* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* FREERUN */ + /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */ + }, + + /* Port B configuration */ + { /* conf ppar psor pdir podr pdat */ + /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ + /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ + /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ + /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ + /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ + /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ + /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ + /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ + /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ + /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ + /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ + /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ + /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ + /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ + /* PB17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */ + /* PB16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */ + /* PB15 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */ + /* PB14 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */ + /* PB13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:COL */ + /* PB12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:CRS */ + /* PB11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ + /* PB10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ + /* PB9 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ + /* PB8 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ + /* PB7 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ + /* PB6 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ + /* PB5 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ + /* PB4 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ + /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ + }, + + /* Port C */ + { /* conf ppar psor pdir podr pdat */ + /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */ + /* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */ + /* PC29 */ { 0, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */ + /* PC28 */ { 0, 0, 0, 1, 0, 0 }, /* PC28 */ + /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* UART Clock in */ + /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */ + /* PC25 */ { 0, 0, 0, 1, 0, 0 }, /* PC25 */ + /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */ + /* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* ATMTFCLK */ + /* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */ + /* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */ + /* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */ + /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK CLK13 */ + /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK14) */ + /* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */ + /* PC16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK16) */ + /* PC15 */ { 1, 1, 0, 0, 0, 0 }, /* PC15 */ + /* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */ + /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */ + /* PC12 */ { 0, 1, 0, 1, 0, 0 }, /* PC12 */ + /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* LXT971 transmit control */ + /* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* FETHMDC */ + /* PC9 */ { 1, 0, 0, 0, 0, 0 }, /* FETHMDIO */ + /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */ + /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */ + /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */ + /* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */ + /* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */ + /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */ + /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */ + /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */ + /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */ + }, + + /* Port D */ + { /* conf ppar psor pdir podr pdat */ + /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */ + /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */ + /* PD29 */ { 1, 1, 0, 1, 0, 0 }, /* SCC1 RTS */ + /* PD28 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 RxD */ + /* PD27 */ { 1, 1, 1, 1, 0, 0 }, /* SCC2 TxD */ + /* PD26 */ { 1, 1, 0, 1, 0, 0 }, /* SCC2 RTS */ + /* PD25 */ { 0, 0, 0, 1, 0, 0 }, /* PD25 */ + /* PD24 */ { 0, 0, 0, 1, 0, 0 }, /* PD24 */ + /* PD23 */ { 0, 0, 0, 1, 0, 0 }, /* PD23 */ + /* PD22 */ { 0, 0, 0, 1, 0, 0 }, /* PD22 */ + /* PD21 */ { 0, 0, 0, 1, 0, 0 }, /* PD21 */ + /* PD20 */ { 0, 0, 0, 1, 0, 0 }, /* PD20 */ + /* PD19 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */ + /* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD18 */ + /* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */ + /* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */ + /* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SDA */ + /* PD14 */ { 0, 0, 0, 1, 0, 0 }, /* LED */ + /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */ + /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */ + /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */ + /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ + /* PD9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC1 TXD */ + /* PD8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC1 RXD */ + /* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */ + /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */ + /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */ + /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */ + /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ + } +}; + +int board_early_init_f (void) +{ +#if defined(CONFIG_PCI) + volatile immap_t *immr = (immap_t *)CFG_IMMR; + volatile ccsr_pcix_t *pci = &immr->im_pcix; + + pci->peer &= 0xfffffffdf; /* disable master abort */ +#endif + return 0; +} + +void reset_phy (void) +{ +#if defined(CONFIG_ETHER_ON_FCC) /* avoid compile warnings for now */ + volatile unsigned char *bcsr = (unsigned char *) CFG_BCSR; +#endif + /* reset Giga bit Ethernet port if needed here */ + + /* reset the CPM FEC port */ +#if (CONFIG_ETHER_INDEX == 2) + bcsr[0] &= ~0x20; + udelay(2); + bcsr[0] |= 0x20; + udelay(1000); +#elif (CONFIG_ETHER_INDEX == 3) + bcsr[0] &= ~0x10; + udelay(2); + bcsr[0] |= 0x10; + udelay(1000); +#endif +#if defined(CONFIG_MII) && defined(CONFIG_ETHER_ON_FCC) + miiphy_reset(0x0); /* reset PHY */ + miiphy_write(0, PHY_MIPSCR, 0xf028); /* change PHY address to 0x02 */ + miiphy_write(0x02, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG); +#endif /* CONFIG_MII */ +} + +int checkboard (void) +{ + sys_info_t sysinfo; + + get_sys_info (&sysinfo); + + printf ("Board: Wind River SBC8560 Board\n"); + printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000); + printf ("\tCCB: %lu MHz\n", sysinfo.freqSystemBus / 1000000); + printf ("\tDDR: %lu MHz\n", sysinfo.freqSystemBus / 2000000); + if((CFG_LBC_LCRR & 0x0f) == 2 || (CFG_LBC_LCRR & 0x0f) == 4 \ + || (CFG_LBC_LCRR & 0x0f) == 8) { + printf ("\tLBC: %lu MHz\n", sysinfo.freqSystemBus / 1000000 /(CFG_LBC_LCRR & 0x0f)); + } else { + printf("\tLBC: unknown\n"); + } + printf("\tCPM: %lu Mhz\n", sysinfo.freqSystemBus / 1000000); + printf("L1 D-cache 32KB, L1 I-cache 32KB enabled.\n"); + return (0); +} + + +long int initdram (int board_type) +{ + long dram_size = 0; + extern long spd_sdram (void); + volatile immap_t *immap = (immap_t *)CFG_IMMR; +#if !defined(CONFIG_RAM_AS_FLASH) + volatile ccsr_lbc_t *lbc= &immap->im_lbc; + sys_info_t sysinfo; + uint temp_lbcdll = 0; +#endif +#if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL) + volatile ccsr_gur_t *gur= &immap->im_gur; +#endif +#if defined(CONFIG_DDR_DLL) + uint temp_ddrdll = 0; + + /* Work around to stabilize DDR DLL */ + temp_ddrdll = gur->ddrdllcr; + gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000; + asm("sync;isync;msync"); +#endif + +#if defined(CONFIG_SPD_EEPROM) + dram_size = spd_sdram (); +#else + dram_size = fixed_sdram (); +#endif + +#if XXX +#if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus SDRAM is not emulating flash */ + get_sys_info(&sysinfo); + /* if localbus freq is less than 66Mhz,we use bypass mode,otherwise use DLL */ + if(sysinfo.freqSystemBus/(CFG_LBC_LCRR & 0x0f) < 66000000) { + lbc->lcrr = (CFG_LBC_LCRR & 0x0fffffff)| 0x80000000; + } else { +#if defined(CONFIG_MPC85xx_REV1) /* need change CLKDIV before enable DLL */ + lbc->lcrr = 0x10000004; /* default CLKDIV is 8, change it to 4 temporarily */ +#endif + lbc->lcrr = CFG_LBC_LCRR & 0x7fffffff; + udelay(200); + temp_lbcdll = gur->lbcdllcr; + gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000; + asm("sync;isync;msync"); + } + lbc->or2 = CFG_OR2_PRELIM; /* 64MB SDRAM */ + lbc->br2 = CFG_BR2_PRELIM; + lbc->lbcr = CFG_LBC_LBCR; + lbc->lsdmr = CFG_LBC_LSDMR_1; + asm("sync"); + (unsigned int) * (ulong *)0 = 0x000000ff; + lbc->lsdmr = CFG_LBC_LSDMR_2; + asm("sync"); + (unsigned int) * (ulong *)0 = 0x000000ff; + lbc->lsdmr = CFG_LBC_LSDMR_3; + asm("sync"); + (unsigned int) * (ulong *)0 = 0x000000ff; + lbc->lsdmr = CFG_LBC_LSDMR_4; + asm("sync"); + (unsigned int) * (ulong *)0 = 0x000000ff; + lbc->lsdmr = CFG_LBC_LSDMR_5; + asm("sync"); + lbc->lsrt = CFG_LBC_LSRT; + asm("sync"); + lbc->mrtpr = CFG_LBC_MRTPR; + asm("sync"); +#endif +#endif + +#if defined(CONFIG_DDR_ECC) + { + /* Initialize all of memory for ECC, then + * enable errors */ + uint *p = 0; + uint i = 0; + volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile ccsr_ddr_t *ddr= &immap->im_ddr; + dma_init(); + for (*p = 0; p < (uint *)(8 * 1024); p++) { + if (((unsigned int)p & 0x1f) == 0) { dcbz(p); } + *p = (unsigned int)0xdeadbeef; + if (((unsigned int)p & 0x1c) == 0x1c) { dcbf(p); } + } + + /* 8K */ + dma_xfer((uint *)0x2000,0x2000,(uint *)0); + /* 16K */ + dma_xfer((uint *)0x4000,0x4000,(uint *)0); + /* 32K */ + dma_xfer((uint *)0x8000,0x8000,(uint *)0); + /* 64K */ + dma_xfer((uint *)0x10000,0x10000,(uint *)0); + /* 128k */ + dma_xfer((uint *)0x20000,0x20000,(uint *)0); + /* 256k */ + dma_xfer((uint *)0x40000,0x40000,(uint *)0); + /* 512k */ + dma_xfer((uint *)0x80000,0x80000,(uint *)0); + /* 1M */ + dma_xfer((uint *)0x100000,0x100000,(uint *)0); + /* 2M */ + dma_xfer((uint *)0x200000,0x200000,(uint *)0); + /* 4M */ + dma_xfer((uint *)0x400000,0x400000,(uint *)0); + + for (i = 1; i < dram_size / 0x800000; i++) { + dma_xfer((uint *)(0x800000*i),0x800000,(uint *)0); + } + + /* Enable errors for ECC */ + ddr->err_disable = 0x00000000; + asm("sync;isync;msync"); + } +#endif + + return dram_size; +} + + +#if defined(CFG_DRAM_TEST) +int testdram (void) +{ + uint *pstart = (uint *) CFG_MEMTEST_START; + uint *pend = (uint *) CFG_MEMTEST_END; + uint *p; + + printf("SDRAM test phase 1:\n"); + for (p = pstart; p < pend; p++) + *p = 0xaaaaaaaa; + + for (p = pstart; p < pend; p++) { + if (*p != 0xaaaaaaaa) { + printf ("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + + printf("SDRAM test phase 2:\n"); + for (p = pstart; p < pend; p++) + *p = 0x55555555; + + for (p = pstart; p < pend; p++) { + if (*p != 0x55555555) { + printf ("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + + printf("SDRAM test passed.\n"); + return 0; +} +#endif + +#if !defined(CONFIG_SPD_EEPROM) +/************************************************************************* + * fixed sdram init -- doesn't use serial presence detect. + ************************************************************************/ +long int fixed_sdram (void) +{ + +#define CFG_DDR_CONTROL 0xc2000000 + + #ifndef CFG_RAMBOOT + volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile ccsr_ddr_t *ddr= &immap->im_ddr; + + ddr->cs0_bnds = 0x00000007; + ddr->cs1_bnds = 0x0010001f; + ddr->cs2_bnds = 0x00000000; + ddr->cs3_bnds = 0x00000000; + ddr->cs0_config = 0x80000102; + ddr->cs1_config = 0x80000102; + ddr->cs2_config = 0x00000000; + ddr->cs3_config = 0x00000000; + ddr->timing_cfg_1 = 0x37334321; + ddr->timing_cfg_2 = 0x00000800; + ddr->sdram_cfg = 0x42000000; + ddr->sdram_mode = 0x00000022; + ddr->sdram_interval = 0x05200100; + ddr->err_sbe = 0x00ff0000; + #if defined (CONFIG_DDR_ECC) + ddr->err_disable = 0x0000000D; + #endif + asm("sync;isync;msync"); + udelay(500); + #if defined (CONFIG_DDR_ECC) + /* Enable ECC checking */ + ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000); + #else + ddr->sdram_cfg = CFG_DDR_CONTROL; + #endif + asm("sync; isync; msync"); + udelay(500); + #endif + return CFG_SDRAM_SIZE * 1024 * 1024; +} +#endif /* !defined(CONFIG_SPD_EEPROM) */ diff --git a/board/sbc8560/u-boot.lds b/board/sbc8560/u-boot.lds new file mode 100644 index 0000000000..a3ed1d5af6 --- /dev/null +++ b/board/sbc8560/u-boot.lds @@ -0,0 +1,154 @@ +/* + * (C) Copyright 2002,2003,Motorola,Inc. + * Xianghua Xiao, X.Xiao@motorola.com. + * + * (C) Copyright 2004 Wind River Systems Inc . + * Added support for Wind River SBC8560 board + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + .bootpg 0xFFFFF000 : + { + cpu/mpc85xx/start.o (.bootpg) + board/sbc8560/init.o (.bootpg) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc85xx/start.o (.text) + board/sbc8560/init.o (.text) + cpu/mpc85xx/commproc.o (.text) + cpu/mpc85xx/traps.o (.text) + cpu/mpc85xx/interrupts.o (.text) + cpu/mpc85xx/serial_scc.o (.text) + cpu/mpc85xx/ether_fcc.o (.text) + cpu/mpc85xx/cpu_init.o (.text) + cpu/mpc85xx/cpu.o (.text) + cpu/mpc85xx/speed.o (.text) + cpu/mpc85xx/i2c.o (.text) + cpu/mpc85xx/spd_sdram.o (.text) + common/dlmalloc.o (.text) + lib_generic/crc32.o (.text) + lib_ppc/extable.o (.text) + lib_generic/zlib.o (.text) + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/common/cmd_nand.c b/common/cmd_nand.c index 8d115eb267..c874e7c570 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -20,6 +20,10 @@ #if (CONFIG_COMMANDS & CFG_CMD_NAND) +#ifdef CONFIG_AT91RM9200DK +#include +#endif + #include #include #include diff --git a/cpu/at91rm9200/at45.c b/cpu/at91rm9200/at45.c index 9dfe5609bf..3c00132164 100644 --- a/cpu/at91rm9200/at45.c +++ b/cpu/at91rm9200/at45.c @@ -25,7 +25,14 @@ #ifdef CONFIG_HAS_DATAFLASH #include -#define SPI_CLK 5000000 +#define AT91C_SPI_CLK 10000000 /* Max Value = 10MHz to be compliant to +the Continuous Array Read function */ + +/* AC Characteristics */ +/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */ +#define DATAFLASH_TCSS (0xC << 16) +#define DATAFLASH_TCHS (0x1 << 24) + #define AT91C_TIMEOUT_WRDY 200000 #define AT91C_SPI_PCS0_SERIAL_DATAFLASH 0xE /* Chip Select 0 : NPCS0 %1110 */ #define AT91C_SPI_PCS3_DATAFLASH_CARD 0x7 /* Chip Select 3 : NPCS3 %0111 */ @@ -50,9 +57,11 @@ void AT91F_SpiInit(void) { AT91C_BASE_SPI->SPI_MR = AT91C_SPI_MSTR | AT91C_SPI_MODFDIS | AT91C_SPI_PCS; /* Configure CS0 and CS3 */ - *(AT91C_SPI_CSR + 0) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & 0x100000) | ((AT91C_MASTER_CLOCK / (2*SPI_CLK)) << 8); + *(AT91C_SPI_CSR + 0) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT & + DATAFLASH_TCHS) | ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8); - *(AT91C_SPI_CSR + 3) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & 0x100000) | ((AT91C_MASTER_CLOCK / (2*SPI_CLK)) << 8); + *(AT91C_SPI_CSR + 3) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT & + DATAFLASH_TCHS) | ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8); } diff --git a/cpu/mpc85xx/tsec.c b/cpu/mpc85xx/tsec.c index 0d858ed977..3255db8d8f 100644 --- a/cpu/mpc85xx/tsec.c +++ b/cpu/mpc85xx/tsec.c @@ -25,13 +25,6 @@ #define TX_BUF_CNT 2 -#undef TSEC_DEBUG -#ifdef TSEC_DEBUG -#define DBGPRINT(x,y) printf(x,y) -#else -#define DBGPRINT(x,y) -#endif - static uint rxIdx; /* index of the current RX buffer */ static uint txIdx; /* index of the current TX buffer */ @@ -564,7 +557,7 @@ static int tsec_send(struct eth_device* dev, volatile void *packet, int length) /* Find an empty buffer descriptor */ for(i=0; rtx.txbd[txIdx].status & TXBD_READY; i++) { if (i >= TOUT_LOOP) { - DBGPRINT("%s: tsec: tx buffers full\n", dev->name); + debug ("%s: tsec: tx buffers full\n", dev->name); return result; } } @@ -579,7 +572,7 @@ static int tsec_send(struct eth_device* dev, volatile void *packet, int length) /* Wait for buffer to be transmitted */ for(i=0; rtx.txbd[txIdx].status & TXBD_READY; i++) { if (i >= TOUT_LOOP) { - DBGPRINT("%s: tsec: tx error\n", dev->name); + debug ("%s: tsec: tx error\n", dev->name); return result; } } diff --git a/doc/README.sbc8560 b/doc/README.sbc8560 new file mode 100644 index 0000000000..52592e3f41 --- /dev/null +++ b/doc/README.sbc8560 @@ -0,0 +1,53 @@ +The port was tested on Wind River System Sbc8560 board . +U-Boot was installed on the flash memory of the CPU card (no the SODIMM). + +NOTE: Please configure uboot compile to the proper PCI frequency and +setup the appropriate DIP switch settings. + +SBC8560 board: + +Make sure boards switches are set to their appropriate conditions. +Refer to the Engineering Reference Guide ERG-00300-002. Of particular +importance are: 1)Tthe settings for JP4 (JP4 1-3 and 2-4), which +select the on-board FLASH device (Intel 28F128Jx); 2) The settings +for the Clock SW9 (33 MHz or 66 MHz). + + Note: SW9 Settings: 66 MHz + 4:1 ratio CCB clocks:SYSCLK + 3:1 ration e500 Core:CCB + pos1 - on, pos2 - on, pos3 - off, pos4 - on, pos5 - off, pos6 - on + Note: SW9 Settings: 33 MHz + 8:1 ratio CCB clocks:SYSCLK + 3:1 ration e500 Core:CCB + pos1 - on, pos2 - on, pos3 - on, pos4 - off, pos5 - off, pos6 - on + + +Flashing the FLASH device with the "Wind River ICE": + +1) Properly connect and configure the Wind River ICE to the + target JTAG port. This includes running the SBC8560 register script. + Make sure target memory can be read and written. + +2) Build the u-boot image: + make distclean + make SBC8560_66_config or SBC8560_33_config + make CROSS_COMPILE=.../ELDK3.0/ppc_8xx-/ all + + Note: reference is made to the ELDK3.0 compiler but any 85xx cross-compiler + should suffice. + +3) Convert the uboot (.elf) file to a uboot.bin file (using visionClick converter). + The bin file should be converted from fffc0000 to ffffffff + +4) Setup the Flash Utility (tools menu) for: + + Determine the clock speed of the PCI bus and set SW9 accordingly + Note: the speed of the PCI bus defaults to the slowest PCI card + PlayBack the "default" register file for the SBC8560 + Select the uboot.bin file with zero bias + Select the initialize Target prior to programming + Select the V28F640Jx (8192 x 8) 1 device FLASH Algorithm + Select the erase base address from FFFC0000 to FFFFFFFF + Select the start address from 0 with size of 4000 + +5) Erase and Program diff --git a/examples/Makefile b/examples/Makefile index 3229303aaa..e94ac47f98 100644 --- a/examples/Makefile +++ b/examples/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 +# (C) Copyright 2000-2004 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this diff --git a/include/asm-arm/arch-at91rm9200/AT91RM9200.h b/include/asm-arm/arch-at91rm9200/AT91RM9200.h index 60f17376bd..29ed49dd4b 100644 --- a/include/asm-arm/arch-at91rm9200/AT91RM9200.h +++ b/include/asm-arm/arch-at91rm9200/AT91RM9200.h @@ -459,6 +459,8 @@ typedef struct _AT91S_PDC { #define AT91C_ID_TC0 ((unsigned int) 17) /* Timer Counter 0 */ #define AT91C_ID_EMAC ((unsigned int) 24) /* Ethernet MAC */ #define AT91C_ID_SPI ((unsigned int) 13) /* Serial Peripheral Interface */ +#define AT91C_ID_PIOB ((unsigned int) 3) +#define AT91C_ID_PIOC ((unsigned int) 4) #define AT91C_PIO_PC1 ((unsigned int) 1 << 1) /* Pin Controlled by PC1 */ #define AT91C_PC1_BFRDY_SMOE ((unsigned int) AT91C_PIO_PC1) /* Burst Flash Ready */ diff --git a/include/configs/SBC8560.h b/include/configs/SBC8560.h new file mode 100644 index 0000000000..cf5ef63d1a --- /dev/null +++ b/include/configs/SBC8560.h @@ -0,0 +1,398 @@ +/* + * (C) Copyright 2002,2003 Motorola,Inc. + * Xianghua Xiao + * + * (C) Copyright 2004 Wind River Systems Inc . + * Added support for Wind River SBC8560 board + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* mpc8560ads board configuration file */ +/* please refer to doc/README.mpc85xx for more info */ +/* make sure you change the MAC address and other network params first, + * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* High Level Configuration Options */ +#define CONFIG_BOOKE 1 /* BOOKE */ +#define CONFIG_E500 1 /* BOOKE e500 family */ +#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ +#define CONFIG_MPC85xx_REV1 1 /* MPC85xx Rev 1.0 chip */ + + +#define CONFIG_MPC8560 1 /* MPC8560 specific */ +#define CONFIG_SBC8560 1 /* configuration for SBC8560 board */ + +/* XXX flagging this as something I might want to delete */ +#define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific */ + +#define CONFIG_TSEC_ENET /* tsec ethernet support */ +#undef CONFIG_PCI /* pci ethernet support */ +#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */ + + +#define CONFIG_ENV_OVERWRITE + +/* Using Localbus SDRAM to emulate flash before we can program the flash, + * normally you need a flash-boot image(u-boot.bin), if so undef this. + */ +#undef CONFIG_RAM_AS_FLASH + +#if defined(CONFIG_PCI_66) /* some PCI card is 33Mhz only */ + #define CONFIG_SYS_CLK_FREQ 66000000/* sysclk for MPC85xx */ +#else + #define CONFIG_SYS_CLK_FREQ 33000000/* most pci cards are 33Mhz */ +#endif + +/* below can be toggled for performance analysis. otherwise use default */ +#define CONFIG_L2_CACHE /* toggle L2 cache */ +#undef CONFIG_BTB /* toggle branch predition */ +#undef CONFIG_ADDR_STREAMING /* toggle addr streaming */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ + +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00200000 /* memtest region */ +#define CFG_MEMTEST_END 0x00400000 + +#if (defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) || \ + defined(CONFIG_PCI) && defined(CONFIG_ETHER_ON_FCC) || \ + defined(CONFIG_TSEC_ENET) && defined(CONFIG_ETHER_ON_FCC)) +#error "You can only use ONE of PCI Ethernet Card or TSEC Ethernet or CPM FCC." +#endif + +/* + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + */ +#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ + +#if XXX + #define CFG_CCSRBAR 0xfdf00000 /* relocated CCSRBAR */ +#else + #define CFG_CCSRBAR 0xff700000 /* default CCSRBAR */ +#endif +#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ + +#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */ +#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE +#define CFG_SDRAM_SIZE 512 /* DDR is 512MB */ +#define SPD_EEPROM_ADDRESS 0x55 /* DDR DIMM */ + +#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ + +#if defined(CONFIG_MPC85xx_REV1) + #define CONFIG_DDR_DLL /* possible DLL fix needed */ +#endif + +#undef CONFIG_CLOCKS_IN_MHZ + +#if defined(CONFIG_RAM_AS_FLASH) + #define CFG_LBC_SDRAM_BASE 0xfc000000 /* Localbus SDRAM */ + #define CFG_FLASH_BASE 0xf8000000 /* start of FLASH 8M */ + #define CFG_BR0_PRELIM 0xf8000801 /* port size 8bit */ + #define CFG_OR0_PRELIM 0xf8000ff7 /* 8MB Flash */ +#else /* Boot from real Flash */ + #define CFG_LBC_SDRAM_BASE 0xf8000000 /* Localbus SDRAM */ + #define CFG_FLASH_BASE 0xff800000 /* start of FLASH 8M */ + #define CFG_BR0_PRELIM 0xff800801 /* port size 8bit */ + #define CFG_OR0_PRELIM 0xff800ff7 /* 8MB Flash */ +#endif +#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ + +/* local bus definitions */ +#define CFG_BR1_PRELIM 0xe4001801 /* 64M, 32-bit flash */ +#define CFG_OR1_PRELIM 0xfc000ff7 + +#define CFG_BR2_PRELIM 0x00000000 /* CS2 not used */ +#define CFG_OR2_PRELIM 0x00000000 + +#define CFG_BR3_PRELIM 0xf0001861 /* 64MB localbus SDRAM */ +#define CFG_OR3_PRELIM 0xfc000cc1 + +#if defined(CONFIG_RAM_AS_FLASH) + #define CFG_BR4_PRELIM 0xf4001861 /* 64M localbus SDRAM */ +#else + #define CFG_BR4_PRELIM 0xf8001861 /* 64M localbus SDRAM */ +#endif +#define CFG_OR4_PRELIM 0xfc000cc1 + +#define CFG_BR5_PRELIM 0xfc000801 /* 16M CS5 misc devices */ +#if 1 + #define CFG_OR5_PRELIM 0xff000ff7 +#else + #define CFG_OR5_PRELIM 0xff0000f0 +#endif + +#define CFG_BR6_PRELIM 0xe0001801 /* 64M, 32-bit flash */ +#define CFG_OR6_PRELIM 0xfc000ff7 +#define CFG_LBC_LCRR 0x00030002 /* local bus freq */ +#define CFG_LBC_LBCR 0x00000000 +#define CFG_LBC_LSRT 0x20000000 +#define CFG_LBC_MRTPR 0x20000000 +#define CFG_LBC_LSDMR_1 0x2861b723 +#define CFG_LBC_LSDMR_2 0x0861b723 +#define CFG_LBC_LSDMR_3 0x0861b723 +#define CFG_LBC_LSDMR_4 0x1861b723 +#define CFG_LBC_LSDMR_5 0x4061b723 + +/* just hijack the MOT BCSR def for SBC8560 misc devices */ +#define CFG_BCSR ((CFG_BR5_PRELIM & 0xff000000)|0x00400000) +/* the size of CS5 needs to be >= 16M for TLB and LAW setups */ + +#define CONFIG_L1_INIT_RAM +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0x70000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ + +/* Serial Port */ +#undef CONFIG_CONS_ON_SCC /* define if console on SCC */ +#undef CONFIG_CONS_NONE /* define if console on something else */ + +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK 1843200 /* get_bus_freq(0) */ +#define CONFIG_BAUDRATE 9600 + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CFG_NS16550_COM1 ((CFG_BR5_PRELIM & 0xff000000)+0x00700000) +#define CFG_NS16550_COM2 ((CFG_BR5_PRELIM & 0xff000000)+0x00800000) + +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ + +#define CFG_PCI_MEM_BASE 0xC0000000 +#define CFG_PCI_MEM_PHYS 0xC0000000 +#define CFG_PCI_MEM_SIZE 0x10000000 + +#if defined(CONFIG_TSEC_ENET) /* TSEC Ethernet port */ + + #define CONFIG_NET_MULTI 1 + #define CONFIG_PHY_BCM5421S 1 /* GigaBit Ether PHY */ + #define CONFIG_MII 1 /* MII PHY management */ + #define CONFIG_PHY_ADDR 25 /* PHY address */ + +#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */ + + #undef CONFIG_ETHER_NONE /* define if ether on something else */ + #define CONFIG_ETHER_ON_FCC2 /* cpm FCC ethernet support */ + #define CONFIG_ETHER_INDEX 2 /* which channel for ether */ + + #if (CONFIG_ETHER_INDEX == 2) + /* + * - Rx-CLK is CLK13 + * - Tx-CLK is CLK14 + * - Select bus for bd/buffers + * - Full duplex + */ + #define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) + #define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) + #define CFG_CPMFCR_RAMTYPE 0 + #define CFG_FCC_PSMR (FCC_PSMR_FDE) + + #elif (CONFIG_ETHER_INDEX == 3) + /* need more definitions here for FE3 */ + #endif /* CONFIG_ETHER_INDEX */ + + #define CONFIG_MII /* MII PHY management */ + #define CONFIG_BITBANGMII /* bit-bang MII PHY management */ + /* + * GPIO pins used for bit-banged MII communications + */ + #define MDIO_PORT 2 /* Port C */ + #define MDIO_ACTIVE (iop->pdir |= 0x00400000) + #define MDIO_TRISTATE (iop->pdir &= ~0x00400000) + #define MDIO_READ ((iop->pdat & 0x00400000) != 0) + + #define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \ + else iop->pdat &= ~0x00400000 + + #define MDC(bit) if(bit) iop->pdat |= 0x00200000; \ + else iop->pdat &= ~0x00200000 + + #define MIIDELAY udelay(1) + +#endif + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#if 0 +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_PROTECTION /* use hardware protection */ +#endif +#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ + +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 200000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 50000 /* Timeout for Flash Write (in ms) */ + +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#if 0 +/* XXX This doesn't work and I don't want to fix it */ +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) + #define CFG_RAMBOOT +#else + #undef CFG_RAMBOOT +#endif +#endif + +/* Environment */ +#if !defined(CFG_RAMBOOT) + #if defined(CONFIG_RAM_AS_FLASH) + #define CFG_ENV_IS_NOWHERE + #define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x100000) + #define CFG_ENV_SIZE 0x2000 + #else + #define CFG_ENV_IS_IN_FLASH 1 + #define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE) + #define CFG_ENV_SIZE 0x2000 /* CFG_ENV_SECT_SIZE */ + #endif +#else + #define CFG_NO_FLASH 1 /* Flash is not usable now */ + #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) + #define CFG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=192.168.0.251:/tftpboot ip=192.168.0.105:192.168.0.251::255.255.255.0:sbc8560:eth0:off console=ttyS0,9600" +/*#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"*/ +#define CONFIG_BOOTCOMMAND "bootm 0xff800000 0xffa00000" +#define CONFIG_BOOTDELAY 5 /* -1 disable autoboot */ + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH) + #if defined(CONFIG_PCI) + #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PCI | \ + CFG_CMD_PING | CFG_CMD_I2C) & \ + ~(CFG_CMD_ENV | \ + CFG_CMD_LOADS )) + #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)) + #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_MII | \ + CFG_CMD_PING | CFG_CMD_I2C) & \ + ~(CFG_CMD_ENV)) + #endif +#else + #if defined(CONFIG_PCI) + #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | \ + CFG_CMD_PING | CFG_CMD_I2C) + #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)) + #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MII | \ + CFG_CMD_PING | CFG_CMD_I2C) + #endif +#endif + +#include + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "SBC8560=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR 0x1000000 /* default load address */ +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* Cache Configuration */ +#define CFG_DCACHE_SIZE 32768 +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ + #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/*Note: change below for your network setting!!! */ +#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) + #define CONFIG_ETHADDR 00:01:af:07:9b:8a + #define CONFIG_ETH1ADDR 00:01:af:07:9b:8b + #define CONFIG_ETH2ADDR 00:01:af:07:9b:8c +#endif + +#define CONFIG_SERVERIP 192.168.0.131 +#define CONFIG_IPADDR 192.168.0.105 +#define CONFIG_GATEWAYIP 0.0.0.0 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_HOSTNAME SBC8560 +#define CONFIG_ROOTPATH /home/ppc +#define CONFIG_BOOTFILE pImage + +#endif /* __CONFIG_H */ diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h index 3949f9caa0..94b6a8de95 100644 --- a/include/configs/at91rm9200dk.h +++ b/include/configs/at91rm9200dk.h @@ -29,20 +29,20 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* undef for developing */ /* ARM asynchronous clock */ -#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */ -#define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */ -/* #define AT91C_MASTER_CLOCK 44928000 */ /* peripheral clock (AT91C_MASTER_CLOCK / 4) */ +#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */ +#define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */ +/* #define AT91C_MASTER_CLOCK 44928000 */ /* peripheral clock (AT91C_MASTER_CLOCK / 4) */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ -#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */ +#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */ #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 +#define CONFIG_INITRD_TAG 1 /* * Size of malloc() pool @@ -63,10 +63,10 @@ #undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ #define CONFIG_BOOTDELAY 3 -/* #define CONFIG_ENV_OVERWRITE 1 */ +/* #define CONFIG_ENV_OVERWRITE 1 */ #define CONFIG_COMMANDS \ - ((CONFIG_CMD_DFL | \ + ((CONFIG_CMD_DFL | \ CFG_CMD_DHCP ) & \ ~(CFG_CMD_BDI | \ CFG_CMD_IMI | \ @@ -85,12 +85,12 @@ #define ADDR_PAGE 2 #define ADDR_COLUMN_PAGE 3 -#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_ChipID_UNKNOWN 0x00 #define NAND_MAX_FLOORS 1 #define NAND_MAX_CHIPS 1 -#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */ -#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */ +#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */ +#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */ #define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0) #define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0) @@ -111,53 +111,53 @@ #define PHYS_SDRAM 0x20000000 #define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */ -#define CFG_MEMTEST_START PHYS_SDRAM -#define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 +#define CFG_MEMTEST_START PHYS_SDRAM +#define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 #define CONFIG_DRIVER_ETHER -#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_AT91C_USE_RMII -#define CONFIG_HAS_DATAFLASH 1 -#define CFG_SPI_WRITE_TOUT (5*CFG_HZ) -#define CFG_MAX_DATAFLASH_BANKS 2 -#define CFG_MAX_DATAFLASH_PAGES 16384 +#define CONFIG_HAS_DATAFLASH 1 +#define CFG_SPI_WRITE_TOUT (5*CFG_HZ) +#define CFG_MAX_DATAFLASH_BANKS 2 +#define CFG_MAX_DATAFLASH_PAGES 16384 #define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */ #define CFG_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */ -#define PHYS_FLASH_1 0x10000000 -#define PHYS_FLASH_SIZE 0x200000 /* 2 megs main flash */ -#define CFG_FLASH_BASE PHYS_FLASH_1 -#define CFG_MAX_FLASH_BANKS 1 -#define CFG_MAX_FLASH_SECT 40 -#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ -#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ +#define PHYS_FLASH_1 0x10000000 +#define PHYS_FLASH_SIZE 0x200000 /* 2 megs main flash */ +#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 256 +#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ #undef CFG_ENV_IS_IN_DATAFLASH #ifdef CFG_ENV_IS_IN_DATAFLASH -#define CFG_ENV_OFFSET 0x20000 -#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET) -#define CFG_ENV_SIZE 0x2000 /* 0x8000 */ +#define CFG_ENV_OFFSET 0x20000 +#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET) +#define CFG_ENV_SIZE 0x2000 /* 0x8000 */ #else -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* 0x10000 */ -#define CFG_ENV_SIZE 0x2000 /* 0x8000 */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* 0x10000 */ +#define CFG_ENV_SIZE 0x2000 /* 0x8000 */ #endif -#define CFG_LOAD_ADDR 0x21000000 /* default load address */ +#define CFG_LOAD_ADDR 0x21000000 /* default load address */ #define CFG_BOOT_SIZE 0x6000 /* 24 KBytes */ -#define CFG_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000) -#define CFG_U_BOOT_SIZE 0x10000 /* 64 KBytes */ +#define CFG_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000) +#define CFG_U_BOOT_SIZE 0x10000 /* 64 KBytes */ -#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } +#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } -#define CFG_PROMPT "Uboot> " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_PROMPT "U-Boot> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ #ifndef __ASSEMBLY__ /*----------------------------------------------------------------------- @@ -167,20 +167,19 @@ * and can be used by the board specific code (eg board/...) */ -struct bd_info_ext -{ - /* helper variable for board environment handling - * - * env_crc_valid == 0 => uninitialised - * env_crc_valid > 0 => environment crc in flash is valid - * env_crc_valid < 0 => environment crc in flash is invalid - */ - int env_crc_valid; +struct bd_info_ext { + /* helper variable for board environment handling + * + * env_crc_valid == 0 => uninitialised + * env_crc_valid > 0 => environment crc in flash is valid + * env_crc_valid < 0 => environment crc in flash is invalid + */ + int env_crc_valid; }; #endif -#define CFG_HZ AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to - AT91C_TC_TIMER_DIV1_CLOCK */ +#define CFG_HZ AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */ + /* AT91C_TC_TIMER_DIV1_CLOCK */ #define CONFIG_STACKSIZE (32*1024) /* regular stack */ diff --git a/include/flash.h b/include/flash.h index 51a7ae0afa..0b28da7fac 100644 --- a/include/flash.h +++ b/include/flash.h @@ -200,8 +200,9 @@ extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int of #define AMD_ID_LV640U 0x22D722D7 /* 29LV640U ID (64 M, uniform sectors) */ -#define ATM_ID_BV1614 0x000000C0 /* 49BV1614 ID */ +#define ATM_ID_BV1614 0x000000C0 /* 49BV1614 ID */ #define ATM_ID_BV1614A 0x000000C8 /* 49BV1614A ID */ +#define ATM_ID_BV6416 0x000000D6 /* 49BV6416 ID */ #define FUJI_ID_29F800BA 0x22582258 /* MBM29F800BA ID (8M) */ #define FUJI_ID_29F800TA 0x22D622D6 /* MBM29F800TA ID (8M) */ -- 2.39.5