From 8c38b5d03d701134b7d6e4eeea94c229f7470d27 Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Wed, 22 Feb 2012 00:24:38 +0000 Subject: [PATCH] MX53: add function to set SATA clock to internal The MX53 SATA interface can use an internal clock (USB PHY1) instead of an external clock. This is an undocumented feature, but used on most Freescale's evaluation boards, such as MX53-loco. As stated by Freescale's support: Fuses (but not pins) may be used to configure SATA clocks. Particularly the i.MX53 Fuse_Map contains the next information about configuring SATA clocks : SATA_ALT_REF_CLK[1:0] (offset 0x180C) '00' - 100MHz (External) '01' - 50MHz (External) '10' - 120MHz, internal (USB PHY) '11' - Reserved Signed-off-by: Stefano Babic CC: Fabio Estevam --- arch/arm/cpu/armv7/mx5/clock.c | 24 ++++++++++++++++++++++++ arch/arm/include/asm/arch-mx5/clock.h | 1 + 2 files changed, 25 insertions(+) diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c index 8f8d01c26e..d769a4d772 100644 --- a/arch/arm/cpu/armv7/mx5/clock.c +++ b/arch/arm/cpu/armv7/mx5/clock.c @@ -399,6 +399,30 @@ u32 imx_get_fecclk(void) return mxc_get_clock(MXC_IPG_CLK); } +#ifdef CONFIG_MX53 +/* + * The clock for the external interface can be set to use internal clock + * if fuse bank 4, row 3, bit 2 is set. + * This is an undocumented feature and it was confirmed by Freescale's support: + * Fuses (but not pins) may be used to configure SATA clocks. + * Particularly the i.MX53 Fuse_Map contains the next information + * about configuring SATA clocks : SATA_ALT_REF_CLK[1:0] (offset 0x180C) + * '00' - 100MHz (External) + * '01' - 50MHz (External) + * '10' - 120MHz, internal (USB PHY) + * '11' - Reserved +*/ +void mxc_set_sata_internal_clock(void) +{ + u32 *tmp_base = + (u32 *)(IIM_BASE_ADDR + 0x180c); + + set_usb_phy1_clk(); + + writel((readl(tmp_base) & (~0x7)) | 0x4, tmp_base); +} +#endif + /* * Dump some core clockes. */ diff --git a/arch/arm/include/asm/arch-mx5/clock.h b/arch/arm/include/asm/arch-mx5/clock.h index f9f82f3918..e822809d7f 100644 --- a/arch/arm/include/asm/arch-mx5/clock.h +++ b/arch/arm/include/asm/arch-mx5/clock.h @@ -45,5 +45,6 @@ void set_usb_phy2_clk(void); void enable_usb_phy2_clk(unsigned char enable); void set_usboh3_clk(void); void enable_usboh3_clk(unsigned char enable); +void mxc_set_sata_internal_clock(void); #endif /* __ASM_ARCH_CLOCK_H */ -- 2.39.5