From 8de17eb65aef93d8cf379f750777d3163efdf68a Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Sat, 16 May 2015 11:10:31 +0300 Subject: [PATCH] manual: add missing usb blaster commands Change-Id: Ie7fbb9f87a811c4add5b7c8f9581d5bbc90fa4f8 Signed-off-by: Paul Fertser Reviewed-on: http://openocd.zylin.com/2772 Tested-by: jenkins Reviewed-by: Andreas Fritiofson --- doc/openocd.texi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/doc/openocd.texi b/doc/openocd.texi index 6ce1d285..283026d3 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -2685,6 +2685,17 @@ reset_config srst_only @end example @end deffn +@deffn {Command} {usb_blaster_lowlevel_driver} (@option{ftdi}|@option{ftd2xx}|@option{ublast2}) +Chooses the low level access method for the adapter. If not specified, +@option{ftdi} is selected unless it wasn't enabled during the +configure stage. USB-Blaster II needs @option{ublast2}. +@end deffn + +@deffn {Command} {usb_blaster_firmware} @var{path} +This command specifies @var{path} to access USB-Blaster II firmware +image. To be used with USB-Blaster II only. +@end deffn + @end deffn @deffn {Interface Driver} {gw16012} -- 2.39.5