From 8e14ed85ea0071ef20b7e7001a3649cd004e6126 Mon Sep 17 00:00:00 2001 From: Prafulla Wadaskar Date: Tue, 7 Dec 2010 20:58:35 +0530 Subject: [PATCH] mv-common.h: Add support for ARMADA100 Platforms This patch adds commonly used macros for ARMADA100 based baords, Also some code reshuffled and updated for typos and comments Signed-off-by: Prafulla Wadaskar --- include/configs/mv-common.h | 66 ++++++++++++++++++++++++++++--------- 1 file changed, 50 insertions(+), 16 deletions(-) diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index 0a761639dd..97b69713a1 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -39,6 +39,7 @@ #define CONFIG_MARVELL 1 #define CONFIG_ARM926EJS 1 /* Basic Architecture */ +/* ====> Kirkwood Platform Common Definations */ #if defined(CONFIG_KIRKWOOD) #define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */ #define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ @@ -54,27 +55,46 @@ #define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage.cfg #endif /* CONFIG_SYS_KWD_CONFIG */ -/* - * CONFIG_SYS_TEXT_BASE can be defined in board specific header file, if needed - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0x00600000 -#endif /* CONFIG_SYS_TEXT_BASE */ +/* Kirkwood has 2k of Security SRAM, use it for SP */ +#define CONFIG_SYS_INIT_SP_ADDR 0xC8012000 +#define CONFIG_NR_DRAM_BANKS_MAX 2 #define CONFIG_I2C_MVTWSI_BASE KW_TWSI_BASE -#define MV_UART0_BASE KW_UART0_BASE +#define MV_UART_CONSOLE_BASE KW_UART0_BASE #define MV_SATA_BASE KW_SATA_BASE #define MV_SATA_PORT0_OFFSET KW_SATA_PORT0_OFFSET #define MV_SATA_PORT1_OFFSET KW_SATA_PORT1_OFFSET +/* ====> ARMADA100 Platform Common Definations */ +#elif defined (CONFIG_ARMADA100) + +#define CONFIG_SYS_TCLK (14745600) /* NS16550 clk config */ +#define CONFIG_SYS_HZ_CLOCK (3250000) /* Timer Freq. 3.25MHZ */ +#define CONFIG_MARVELL_MFP /* Enable mvmfp driver */ +#define MV_MFPR_BASE ARMD1_MFPR_BASE +#define MV_UART_CONSOLE_BASE ARMD1_UART1_BASE +#define CONFIG_SYS_NS16550_IER (1 << 6) /* Bit 6 in UART_IER register + represents UART Unit Enable */ +/* + * There is no internal RAM in ARMADA100, using DRAM + * TBD: dcache to be used for this + */ +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000) +#define CONFIG_NR_DRAM_BANKS_MAX 2 + #else -#error "Unsupported SoC" +#error "Unsupported SoC Platform..." #endif +/* + * Custom CONFIG_SYS_TEXT_BASE can be done in .h + */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0x00600000 +#endif /* CONFIG_SYS_TEXT_BASE */ + /* additions for new ARM relocation support */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -/* Kirkwood has 2k of Security SRAM, use it for SP */ -#define CONFIG_SYS_INIT_SP_ADDR 0xC8012000 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* * CLKs configurations @@ -88,7 +108,7 @@ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK -#define CONFIG_SYS_NS16550_COM1 MV_UART0_BASE +#define CONFIG_SYS_NS16550_COM1 MV_UART_CONSOLE_BASE /* * Serial Port configuration @@ -156,17 +176,29 @@ #define CONFIG_CMDLINE_EDITING #define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ +#ifndef CONFIG_ARMADA100 /* will be removed latter */ #define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ +#endif /* CONFIG_ARMADA100 */ #define CONFIG_BOARD_EARLY_INIT_F /* call board_init_f for early inits */ #define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ -#define CONFIG_NR_DRAM_BANKS 4 #define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */ #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ -#define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */ -#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */ +#define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */ +#define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */ #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* + * DRAM Banks configuration, Custom config can be done in .h + */ +#ifndef CONFIG_NR_DRAM_BANKS +#define CONFIG_NR_DRAM_BANKS CONFIG_NR_DRAM_BANKS_MAX +#else +#if (CONFIG_NR_DRAM_BANKS > CONFIG_NR_DRAM_BANKS_MAX) +#error CONFIG_NR_DRAM_BANKS Configurated more than available +#endif +#endif /* CONFIG_NR_DRAM_BANKS */ + /* * Ethernet Driver configuration */ @@ -174,7 +206,7 @@ #define CONFIG_CMD_MII #define CONFIG_NETCONSOLE /* include NetConsole support */ #define CONFIG_NET_MULTI /* specify more that one ports available */ -#define CONFIG_MII /* expose smi ove miiphy interface */ +#define CONFIG_MII /* expose smi ove miiphy interface */ #define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */ #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ @@ -232,6 +264,7 @@ /* * File system */ +#ifndef CONFIG_ARMADA100 /* will be removed latter */ #define CONFIG_CMD_EXT2 #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_FAT @@ -242,5 +275,6 @@ #define CONFIG_MTD_PARTITIONS #define CONFIG_CMD_MTDPARTS #define CONFIG_LZO +#endif /* CONFIG_ARMADA100 */ #endif /* _MV_COMMON_H */ -- 2.39.5