From 8e5e9b940cdede0debe528cdd7edccccbb3ebf2a Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Tue, 7 Jul 2009 22:35:02 +0200 Subject: [PATCH] Coding style cleanup; update CHANGELOG Signed-off-by: Wolfgang Denk --- CHANGELOG | 3378 +++++++++++++++++++++++++- board/digsy_mtc/cmd_mtc.c | 30 +- board/esd/dp405/dp405.c | 44 +- cpu/arm926ejs/mx27/generic.c | 1 - cpu/arm926ejs/mx27/timer.c | 3 +- cpu/arm_cortexa8/cpu.c | 1 - cpu/arm_cortexa8/omap3/cache.c | 1 - doc/README.LED | 12 +- doc/README.omap3 | 1 - drivers/qe/uec.c | 2 - include/asm-arm/arch-mx27/imx-regs.h | 2 - include/configs/P2020DS.h | 5 +- include/linux/mtd/concat.h | 2 - include/linux/mtd/mtd.h | 4 +- 14 files changed, 3417 insertions(+), 69 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index 333c60e39a..52940a0b94 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,18 +1,3376 @@ +commit d318d0c44d8e91e937c4dad0c5b1d2f6bb9d9fd8 +Author: Stefan Roese +Date: Mon Jun 29 13:30:50 2009 +0200 + + UBI: Fix build problem noticed on Apollon (arm/testing repo) + + This patch fixes a build problem noticed on Apollon by using + mtd_dev_by_eb() instead of "/" as done in the Linux UBI version. + So this brings the U-Boot UBI version more in sync with the Linux + version again. + + Signed-off-by: Stefan Roese + +commit 2efee52b09657e9353655b9dae9e1d1a67a2abe4 +Author: Prafulla Wadaskar +Date: Mon Jul 6 20:29:15 2009 +0530 + + sf: Macronix additional chips supported + + new chips supported:- + MX25L1605D, MX25L3205D, MX25L6405D, MX25L12855E + out of which MX25L6405D and MX25L12855E tested on Kirkwood platforms + + Modified the Macronix flash support to use 2 bytes of device id instead of 1 + This was required to support MX25L12855E + + Signed-off-by: Piyush Shah + Signed-off-by: Prafulla Wadaskar + Signed-off-by: Mike Frysinger + +commit dd54126715b89ed0c43322aa78b0dad306f043b6 +Author: Mike Frysinger +Date: Fri Jun 19 03:27:28 2009 -0400 + + sf: sst: add sst25vf###b ids + + Signed-off-by: Mike Frysinger + +commit 7d907f0ea993b179a197d8db2a36f122bc673c2d +Author: Mike Frysinger +Date: Fri Jun 19 03:20:06 2009 -0400 + + sf: sst: fix sector size + + Looks like when I was encoding the sector sizes, I forgot to divide by 8 + (due to the stupid marketing driven process that declares all sizes in + useless megabits and not megabytes). + + Signed-off-by: Mike Frysinger + +commit ceb70b466e75ceb1a621b6163f7e31116bfc8094 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Jul 5 01:06:06 2009 +0200 + + nhk8815: fix MAKEALL + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit d08e5ca301b69ab77ecdd34e2b06aee30d6057d1 +Author: Magnus Lilja +Date: Sat Jul 4 10:31:24 2009 +0200 + + MX31: Add NAND SPL boot support to i.MX31 PDK board. + + Signed-off-by: Magnus Lilja + +commit 78eabb90b793fafe875a7469526d1715fa56cbb4 +Author: Prafulla Wadaskar +Date: Mon Jun 29 20:55:54 2009 +0530 + + arm: Kirkwood: arch specific updated for ehci-Kirkwood driver support + + This patch abstracts Kirkwood arch specific changes to support ehci-kirkwood driver + + Signed-off-by: Prafulla Wadaskar + +commit 095a460b49022e64df76134300643606e3acb4e9 +Author: Alessandro Rubini +Date: Mon Jun 29 10:52:37 2009 +0200 + + arm nomadik: use 1000 as HZ value and rewrite timer code + + This sets CONFIG_SYS_HZ to 1000 as required, and completely rewrites + timer code, which is now both correct and much smaller. Unused + functions like udelay_masked() have been removed as no driver uses + them, even the ones that are not currently active for this board. + mtu.h is copied literally from the kernel sources. + + Signed-off-by: Alessandro Rubini + Acked-by: Andrea Gallo + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit f7aa59b29a451cc502078a9e4ba32345a4250c05 +Author: Alessandro Rubini +Date: Mon Jun 22 09:18:57 2009 +0200 + + arm nomadik: allow Nand and OneNand to coexists + + The evaluation kit has both Nand and OneNand, both drivers are there + and the two configurations only select a different default for the + jffs partition. This adds the OneNand driver and cleans up storage. + + Signed-off-by: Alessandro Rubini + Acked-by: Andrea Gallo + +commit fd14c41a861cd38ee2fe3abd61d59b57b4eb23c9 +Author: Alessandro Rubini +Date: Mon Jun 22 09:18:47 2009 +0200 + + arm nomadik: cleanup reset + + There is only one public release of the Nomadik chip, so the ifdef + in reset code as well as a define in the config file are not needed + + Signed-off-by: Alessandro Rubini + Acked-by: Andrea Gallo + +commit ee1363f2da3996bafdecdd8f4e48862ebff3f271 +Author: Alessandro Rubini +Date: Mon Jun 22 09:18:37 2009 +0200 + + arm nomadik: rename board to nhk8815 + + This is an error in my side in the initial submission: nobody + calls it ""nmdk8815", it's "nomadik hardware kit", nhk8815, instead. + + Signed-off-by: Alessandro Rubini + Acked-by: Andrea Gallo + +commit 040f8f63e922bbfb8ba0958bf637f11a917f5c38 +Author: Stefano Babic +Date: Wed Jul 1 20:40:41 2009 +0200 + + xscale: add support for the polaris board + + The Polaris board is based on the TrizepsIV module of + Keith & Koep (http://www.keith-koep.com). + + Signed-off-by: Stefano Babic + +commit 88bd97501314683b87f3f1edcf55b347c041b722 +Author: Stefano Babic +Date: Wed Jul 1 04:33:56 2009 +0200 + + xscale: fix USB initialization for Trizepsiv module + + Due to change in the usb_board_init() prototype, the USB for + the TrizepsIV was not correctly initialized. + Removed dummy print from usb_board_stop(). + + Signed-off-by: Stefano Babic + +commit 0b785ddd60120cfb74d18e58c56054238219f6db +Author: Prafulla Wadaskar +Date: Wed Jul 1 20:34:51 2009 +0200 + + net: merge bugfix: Marvell Kirkwood gigabit ethernet driver + + This patch looks okay on u-boot-net.git/next branch + but when it was merged to u-boot.git/master the last line is missing + + Signed-off-by: Prafulla Wadaskar + Acked-by: Ben Warren + +commit 33b1d3f43a16fbb79004075ce89ae4e618b288a2 +Author: Daniel Gorsulowski +Date: Tue Jun 30 21:03:37 2009 +0200 + + at91: Add esd gmbh MEESC board support + + This patch adds support for esd gmbh MEESC board. + The MEESC is based on an Atmel AT91SAM9263 SoC. + + Signed-off-by: Daniel Gorsulowski + +commit 21761540b43c7086c75ee9afb412da1e5ddde2e9 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Tue Jun 30 21:03:35 2009 +0200 + + ARM: Update mach-types + + update against linux v2.6.30 + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 45627fce18139a74e0755124d27376b520db156c +Author: Daniel Gorsulowski +Date: Tue Jun 30 23:03:33 2009 +0200 + + at91: Add CAN init function + + To enable CAN init, CONFIG_CAN has to be defined in the board config file + and at91_can_hw_init() has to be called in the board specific code. + + CAN is available on AT91SAM9263 and AT91CAP9 SoC. + + Signed-off-by: Daniel Gorsulowski + +commit 2e23008e5dbde7fe4c4758bee5a393e1db796cdf +Author: Simon Kagstrom +Date: Tue Jun 30 23:03:31 2009 +0200 + + arm: Kirkwood: Correct header define + + Correct define typo (. -> ,) + + Signed-off-by: Simon Kagstrom + +commit 8449f287f5c53d59db13c3c512e6bd1750b692d1 +Author: Magnus Lilja +Date: Wed Jul 1 01:07:55 2009 +0200 + + MX31: Add basic support for Freescale i.MX31 PDK board. + + Add support for Freescale's i.MX31 PDK board (a.k.a. 3 stack board). + + This patch assumes that some other program performs the actual + NAND boot. + + Signed-off-by: Magnus Lilja + Acked-by: Fabio Estevam + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 8d460a573e2a2ac4834636903865a0428ad0e629 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Tue Jun 23 00:12:01 2009 +0200 + + S3C24x0: extract interrupts from timer + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit c8badbe500a752f42049e51042767ee62ea714e0 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Jun 28 14:14:21 2009 +0200 + + dm355/pm9261: add missing CONFIG_NET_MULTI + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 798bf9a9ade1cfbe85a16d180cad720927d8e10a +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Tue Jun 23 00:12:01 2009 +0200 + + arm920t/interrupts: Move conditional compilation to Makefile + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 06e758e75c79ce8761866bf8165c443584a20893 +Author: Kim, Heung Jun +Date: Sat Jun 20 11:02:17 2009 +0200 + + move L2 cache enable/disable function to cache.c in the omap3 SoC directory + + Signed-off-by: HeungJun, Kim + CC: Dirk Behme + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit d583ef5147066d3609de21f3beebbab99a19bad4 +Author: Thomas Lange +Date: Sat Jun 20 11:02:17 2009 +0200 + + ARM DaVinci: EMIF settings + + NAND module should not modify EMIF registers unrelated to CS2 + that is used for NAND, i.e. do not modify EWAIT config register + or registers for other Chip Selects. + + Without this patch, EMIF configurations made in board_init() + will be invalidated. + + Signed-off-by: Thomas Lange + +commit 2600b8571a26c10c1c43401d7af38e2333cc5381 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Jun 20 11:02:17 2009 +0200 + + versatile: config coding style cleanup + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Cc: Peter Pearse + +commit 4efb77d41f9c5d93f0f92dda60e742023fa03c72 +Author: Prafulla Wadaskar +Date: Sat Jun 20 11:01:53 2009 +0200 + + arm: Kirkwood: Basic SOCs support + + Kirkwood family controllers are highly integrated SOCs + based on Feroceon-88FR131/Sheeva-88SV131/arm926ejs cpu core. + + SOC versions supported:- + 1) 88F6281-A0 define CONFIG_KW88F6281_A0 + 2) 88F6192-A0 define CONFIG_KW88F6192_A0 + + Other supported features:- + 1) get_random_hex() fucntion + 2) PCI Express port initialization + 3) NS16550 driver support + + Contributors: + Yotam Admon + Michael Blostein + Acked-by: Stefan Rose + Signed-off-by: Prafulla Wadaskar + +commit 5c3d5817e5e68b828c165c501c215e793dc63aac +Author: Prafulla Wadaskar +Date: Sat Jun 20 11:01:52 2009 +0200 + + arm: generic cache.h for ARM architectures + + This patch is required for Kirkwood SoC support + may be used by other ARM architectures + + Signed-off-by: Prafulla Wadaskar + +commit 9c8c706c92e53433a871a563946c38075d76504d +Author: Matthias Ludwig +Date: Sat Jun 20 11:01:50 2009 +0200 + + OMAP3EVM: fix typo. replace CS6 by CS5, no functionality change + + Signed-off-by: Matthias Ludwig + +commit 0aafde1dc76d6d65d6be10bf499ec86d9ffee8b9 +Author: Sedji Gaouaou +Date: Wed Jun 24 08:32:09 2009 +0200 + + at91sam9260/9263: add back up for the rst(reset controller). + + On the boards at91sam9260ek, at91sam9263ek and afed9260, the rstc register was + set to 0 after being set to 500 ms for the PHY reset. + Do backup the old reset length and restore it after the MACB initialisation. + + Signed-off-by: Sedji Gaouaou + Signed-off-by: Stelian Pop + +commit afb0b1315c048ce2b1f35f0183b8b118ad0c14e1 +Author: Kumar Gala +Date: Fri Jul 3 12:45:44 2009 -0500 + + fsl: Fix compiler warnings from gcc-4.4 in sys_eeprom code + + sys_eeprom.c: In function 'do_mac': + sys_eeprom.c:323: warning: dereferencing type-punned pointer will break strict-aliasing rules + sys_eeprom.c: In function 'mac_read_from_eeprom': + sys_eeprom.c:395: warning: dereferencing type-punned pointer will break strict-aliasing rules + + Signed-off-by: Kumar Gala + +commit e94e460c6e8741f42dab6d8dd4b596ba5d9d79ae +Author: Peter Tyser +Date: Tue Jun 30 17:15:51 2009 -0500 + + 83xx: Add support for fsl_dma driver + + Signed-off-by: Peter Tyser + Reviewed-by: Ira W. Snyder + Tested-by: Ira W. Snyder + Acked-by: Kim Phillips + Signed-off-by: Kumar Gala + +commit 9adda5459ca62120c0c50b82b766fe1cf6925bbf +Author: Peter Tyser +Date: Tue Jun 30 17:15:50 2009 -0500 + + 83xx: Replace CONFIG_ECC_INIT_VIA_DDRC references + + Update 83xx architecture's CONFIG_ECC_INIT_VIA_DDRC references to + CONFIG_ECC_INIT_VIA_DDRCONTROLLER, which other Freescale architectures + use + + Signed-off-by: Peter Tyser + Acked-by: Kim Phillips + Signed-off-by: Kumar Gala + +commit 039594a4301dadceb267db5e8b9c8c78b1bb86b5 +Author: Poonam Aggrwal +Date: Thu Jul 2 16:15:01 2009 +0530 + + 8xxx: Second UART port added for MPC85xx, MPC83xx, MPC86xx processors + + Defining the next two configs allows to switch the serial port from the + console using the setenv stdin and stdout + 1. #define CONFIG_SERIAL_MULTI 1 /* Enable both serial ports */ + 2. #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ + + Signed-off-by: Poonam Aggrwal + Signed-off-by: Ed Swarthout + Signed-off-by: Kumar Gala + +commit 546b1032907df70f2dd0f98f3ad09885a88411e5 +Author: Poonam Aggrwal +Date: Thu Jul 2 16:14:40 2009 +0530 + + 85xx: Adds GPIO registers to MPC85xx Memory Map. + + Signed-off-by: Poonam Aggrwal + Signed-off-by: Kumar Gala + +commit 5da6f806b400372b8a0664f3282c9e83a402eb66 +Author: Peter Tyser +Date: Tue Jun 30 17:26:01 2009 -0500 + + 86xx: XPedite5170 board support + + Initial support for Extreme Engineering Solutions XPedite5170 - + a MPC8640-based 3U VPX single board computer with a PMC/XMC + site. + + Signed-off-by: Peter Tyser + Signed-off-by: Kumar Gala + +commit e66f38da8434425aca8df08d06d9ef41b3478d3b +Author: Timur Tabi +Date: Wed Jul 1 16:51:59 2009 -0500 + + fsl_ddr: Fix DDR3 calculation of rank density with 8GB or more + + The calculate for rank density in compute_ranksize() for DDR3 used all + integers for the expression, so the result was also a 32-bit integer, even + though the 'bsize' variable is a u64. Fix the expression to calculate a + true 64-bit value. + + Signed-off-by: Timur Tabi + Signed-off-by: Kumar Gala + +commit 6af015b86b86d94de7ca1b23a3890bc93a50c2ab +Author: Peter Tyser +Date: Tue Jun 30 17:15:49 2009 -0500 + + fsl_dma: Make DMA transactions snoopable + + Make DMA transactions snoopable so that CPUs can keep caches up-to-date. + This allows dma transactions to be used for operations such as memory + copies without any additional cache control operations. + + Signed-off-by: Peter Tyser + Signed-off-by: Kumar Gala + +commit 0d595f76bc9c7c8dff5bd31dffed87a840a03c56 +Author: Peter Tyser +Date: Tue Jun 30 17:15:48 2009 -0500 + + fsl_dma: Break out common memory initialization function + + Signed-off-by: Peter Tyser + Signed-off-by: Kumar Gala + +commit 79f4333ceb059049b3ee560167d6cbaec493695f +Author: Peter Tyser +Date: Tue Jun 30 17:15:47 2009 -0500 + + 8xxx: Move dma_init() call to common code + + Signed-off-by: Peter Tyser + Signed-off-by: Kumar Gala + +commit 191c7118592cd182f2dc7f46b4f72d9bed0e2c76 +Author: Peter Tyser +Date: Tue Jun 30 17:15:46 2009 -0500 + + fsl_dma: Move dma function prototypes to common header file + + Signed-off-by: Peter Tyser + Signed-off-by: Kumar Gala + +commit 7892f619d40f4196e41e7114c5dfee9fad0f572f +Author: Peter Tyser +Date: Tue Jun 30 17:15:45 2009 -0500 + + 8xxx: Rename dma_xfer() to dmacpy() + + Also update dmacpy()'s argument order to match memcpy's and use + phys_addr_t/phy_size_t for address/size arguments + + Signed-off-by: Peter Tyser + Signed-off-by: Kumar Gala + +commit 484919cf3351212ebf748b9b13ece1ddaf7e7d1c +Author: Peter Tyser +Date: Tue Jun 30 17:15:44 2009 -0500 + + fsl_dma: Fix Channel Start bug in dma_check() + + The Channel Start (CS) bit in the Mode Register (MR) should actually be + cleared as the comment in the code suggests. Previously, CS was being + set, not cleared. + + Assuming normal operation of the DMA engine, this change shouldn't have + any real affect. + + Signed-off-by: Peter Tyser + Signed-off-by: Kumar Gala + +commit 51402ac12be9a0025f16db51fbde7c050a54e5fe +Author: Peter Tyser +Date: Tue Jun 30 17:15:43 2009 -0500 + + fsl_dma: Add support for arbitrarily large transfers + + Support DMA transfers larger than the DMA controller's limit of + (2 ^ 26 - 1) bytes + + Signed-off-by: Peter Tyser + Signed-off-by: Kumar Gala + +commit a730393a362741c318b21771b8d7b2647e546c3e +Author: Peter Tyser +Date: Tue Jun 30 17:15:42 2009 -0500 + + fsl_dma: Use proper I/O access functions + + Signed-off-by: Peter Tyser + Signed-off-by: Kumar Gala + +commit 9c06071a6077ba95e9d43226156e39567d5d064a +Author: Peter Tyser +Date: Tue Jun 30 17:15:41 2009 -0500 + + fsl_dma: Add bitfield definitions for common registers + + Signed-off-by: Peter Tyser + Signed-off-by: Kumar Gala + +commit 017f11f68ef543e866be033bcb7b8058a8a380d8 +Author: Peter Tyser +Date: Tue Jun 30 17:15:40 2009 -0500 + + 8xxx: Break out DMA code to a common file + + DMA support is now enabled via the CONFIG_FSL_DMA define instead of the + previous CONFIG_DDR_ECC + + Signed-off-by: Peter Tyser + Signed-off-by: Kumar Gala + +commit 29c35182462feea09f322e51913759a53359a3e0 +Author: Roy Zang +Date: Tue Jun 30 13:56:23 2009 +0800 + + 85xx: Add pci e1000 Ethernet support for P2020 board + + Signed-off-by: Roy Zang + Signed-off-by: Kumar Gala + +commit 156984a3611c28093919d3e3c042f722b5548253 +Author: Kumar Gala +Date: Thu Jun 18 08:39:42 2009 -0500 + + 8xxx: Fix PCI bus address setup for 36-bit configs + + We want the outbound PCI memory map to end at the 4G boundary so we + can maximize the amount of space available for inbound mappings if + we have large amounts of memory. + + This matches the device tree setup in the kernel for the 36-bit physical + configs for the platforms that have one (MPC8641 HPCN & MPC8572 DS). + + Signed-off-by: Kumar Gala + +commit 480f61790565d77432b70b4016b73f2ae27d530f +Author: Kumar Gala +Date: Thu Jun 18 08:23:01 2009 -0500 + + 86xx: Add CPU_TYPE_ENTRY support + + Unify with 83xx and 85xx and use CPU_TYPE_ENTRY. We are going to use + this to convey the # of cores and DDR width in the near future so its + good to keep in sync. + + Signed-off-by: Kumar Gala + +commit 98ab14e858bf60306d0aa3f0df5a7a5f88264aff +Author: Peter Meerwald +Date: Mon Jun 29 15:48:33 2009 -0400 + + Blackfin: TWI/I2C: fix pure writes + + If doing a pure write with register address and data (not a read/write + combo transfer), we don't set the initial transfer length properly which + ends up causing only the register address to be transferred. + + While we're here, fix the i2c_write() parameter description of the buffer. + + Signed-off-by: Peter Meerwald + Signed-off-by: Mike Frysinger + +commit 5710de45808eb8f1cc34b51dc3e67e2422113249 +Author: Prafulla Wadaskar +Date: Sat May 30 01:13:33 2009 +0530 + + spi: Add Marvell Kirkwood SPI driver + + This patch adds a SPI driver for the Marvell Kirkwood SoC's. + + Signed-off-by: Prafulla Wadaskar + +commit 6bde171a4c4116cee179167cb65335a28f99932d +Author: Minkyu Kang +Date: Thu Jun 25 19:21:33 2009 +0900 + + s3c64xx: move the reset_cpu function + + Because of the reset_cpu is soc specific, should be move to soc + And read reset value from SYS_ID register instead of hard code + this patch also supports s3c6410 + + Signed-off-by: Minkyu Kang + +commit 576afd4faeba1519bcb8c0083c3e4d45e5643a48 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun May 17 00:58:37 2009 +0200 + + integrator: merge integratorap and integratorcp + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Acked-by: Peter Pearse + +commit 46937b27427688a56bf7f5944a92d962dc43c3fa +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun May 17 00:58:36 2009 +0200 + + integratorap/cp: use cfi driver + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Acked-by: Peter Pearse + +commit de7a01abd8aeb167946f391327e1e0d1e01f90c9 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun May 17 00:58:36 2009 +0200 + + integratorap/cp/versatile: remove non used functions + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Acked-by: Peter Pearse + +commit f54851a6e3844b7e01581b5a9681f294118b7529 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun May 17 00:58:36 2009 +0200 + + integratorcp: split timer support + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Acked-by: Peter Pearse + +commit 2bcef0723ea11c4e9bfbcfff2a93ec2da520b5f1 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun May 17 00:58:36 2009 +0200 + + integratorap: split timer support + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Acked-by: Peter Pearse + +commit 86baa085c52a7f3377a88074679c5aca9b9e4d38 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun May 17 00:58:36 2009 +0200 + + integratorap: split pci support + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Acked-by: Peter Pearse + +commit 379e9fc0a319b8f6ae16d763590bf023f3afb87c +Author: Ilya Yanok +Date: Mon Jun 8 04:12:50 2009 +0400 + + arm: add support for CONFIG_GENERIC_MMC + + Signed-off-by: Ilya Yanok + +commit 47d19da4d3f9ac4787abe9dee32406478424be52 +Author: Ilya Yanok +Date: Mon Jun 8 04:12:46 2009 +0400 + + serial_mx31: allow it to work with mx27 too and rename to serial_mxc + + UART hardware on i.MX27 is the same as on the i.MX31 so we just + need to provide the driver with correct address of the registers. + + Signed-off-by: Ilya Yanok + +commit 1dc4da749dbde27ec862f5b65703e8e4541fbba3 +Author: Ilya Yanok +Date: Mon Jun 8 04:12:45 2009 +0400 + + mx27: basic cpu support + + This patch adds generic code to support Freescale's i.MX27 SoCs. + + Signed-off-by: Ilya Yanok + +commit dd2f6965a6c71f6f711ec98827880152e022c236 +Author: Magnus Lilja +Date: Sat Jun 13 20:50:03 2009 +0200 + + i.MX31: Create a common device file. + + Signed-off-by: Magnus Lilja + +commit 958f7da7887fea4a2091ae60944d62c1708c2c55 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Jun 13 20:50:02 2009 +0200 + + ARM: Add macros.h to be used in assembler file. + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 40c642bc19b9fa2906e3172487a522fee456340b +Author: Magnus Lilja +Date: Sat Jun 13 20:50:01 2009 +0200 + + MX31: Add NAND SPL for i.MX31. + + This patch adds the NAND SPL framework needed to boot i.MX31 boards + from NAND. + + It has been tested on a i.MX31 PDK board with large page NAND. Small + page NANDs should work as well, but this has not been tested. + + Note: The i.MX31 NFC uses a non-standard layout for large page NANDs, + whether this is compatible with a particular setup depends on how + the NAND device is programmed by the flash programmer (e.g. JTAG + debugger). + + The patch is based on the work by Maxim Artamonov. + + Signed-off-by: Maxim Artamonov + Signed-off-by: Magnus Lilja + +commit df81238b3e27a791da996a9208402ac8f40b9862 +Author: Magnus Lilja +Date: Sat Jun 13 20:50:00 2009 +0200 + + ARM1136: Introduce CONFIG_PRELOADER macro. + + Currently CONFIG_ONENAND_IPL is used in a number of #ifdef's + in start.S. In preparation for adding support for NAND SPL + the macro CONFIG_PRELOADER is introducted and replaces the + CONFIG_ONENAND_IPL in start.S. + + Signed-off-by: Magnus Lilja + +commit 8096c51fd4e611ed666dbe77767e81af5d94fc7b +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Jun 13 12:50:04 2009 +0200 + + at91: unify nor boot support + + the lowlevel init sequence is the same so unify it + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 1b3b7c640d04df2ba9a9d947117d112a75fee7f4 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Jun 13 12:48:36 2009 +0200 + + at91sam9263ek: add nor flash support + + this will allow you to store use it for the env and to boot directly U-Boot from + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 329492329700812c6df275aa0fda09d609cd0fd4 +Author: Ilko Iliev +Date: Fri Jun 12 21:20:39 2009 +0200 + + at91: add support for the PM9261 board of Ronetix GmbH + + The PM9261 board is based on the AT91SAM9261-EK board. + + Here is the page on Ronetix website: + http://www.ronetix.at/starter_kit_9261.html + + Signed-off-by: Ilko Iliev + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 01550a2b650fbabc03334f9eadcc6083601a2414 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri Jun 12 21:20:38 2009 +0200 + + pm9263: use macro instead of hardcode value for the lowlevel_init + + optimize a few the RAM init + + Signed-off-by: Ilko Iliev + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 7a11c7f9747240dc770954d320569596c0fbcb50 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri Jun 12 21:20:37 2009 +0200 + + pm9263: lowlevel init update + + move PSRAM init to pm9263.c + this will allow us after to make the nor lowlevel_init generic + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 3e88337b225bf796f6df21d0a7f591530e9d4ce0 +Author: Mike Frysinger +Date: Mon Jun 15 00:25:19 2009 -0400 + + Blackfin: move ALL += u-boot.ldr to blackfin_config.mk + + The way the ALL variable is used allows for config.mk's to add more + targets themselves without having to clutter up the top level Makefile. + + Signed-off-by: Mike Frysinger + +commit afac8b07172d7e4a65f86ce1ec4c783a6165ba1f +Author: Mike Frysinger +Date: Sun Jun 14 22:29:35 2009 -0400 + + Blackfin: fix SPI flash speed define name + + The SPI flash define is named CONFIG_SF_DEFAULT_SPEED, not + CONFIG_SF_DEFAULT_HZ, so fix the typos in the Blackfin boards. + + Signed-off-by: Mike Frysinger + +commit 9ae55ccf601de7a5b75eb418f3fc3d5eca92c106 +Author: Mike Frysinger +Date: Sun Jun 14 22:26:31 2009 -0400 + + Blackfin: enable -O2 in lib_generic/ for ADI/Bluetechnix boards + + Building the compression code in lib_generic/ with -O2 rather than -Os + gives a nice speed boost without too much code size increase. + + Signed-off-by: Mike Frysinger + +commit fea63e2a44f0db51d2e39ee7793e8c6d7f3cf5d4 +Author: Mike Frysinger +Date: Sun Jun 14 21:23:27 2009 -0400 + + Blackfin: bf548-ezkit: bump up monitor size + + The latest version of U-Boot got a bit fatter in the BSS section which + caused overflows in the RAM region, so increase the monitor size. + + Signed-off-by: Mike Frysinger + +commit bc43a8d8994c2f0be29e09b13b15da7f79e2c081 +Author: Vivi Li +Date: Fri Jun 12 10:53:22 2009 +0000 + + Blackfin: bf533-stamp/bf537-stamp: fix env settings for SPI flash + + The SPI flash layer is much stricter about sector usage than the eeprom + layer we used to use, so update the env settings to better match the + sector alignment of the flashes we use. + + Signed-off-by: Vivi Li + Signed-off-by: Mike Frysinger + +commit 63cb0f4eb2d3cf15e7a1add19d1289f4ae75816c +Author: Vivi Li +Date: Fri Jun 12 10:33:23 2009 +0000 + + Blackfin: bump up default JTAG console timeout + + The debug tools that interface with the other side of the JTAG console + got much slower when generalizing things, so bump up the default timeout + value on the U-Boot side to cope. Hopefully at some point we can improve + the debug tools to speed things back up. + + Signed-off-by: Vivi Li + Signed-off-by: Mike Frysinger + +commit c11ff779f4e0e0c7edc322e84dd229ad28709595 +Author: Mike Frysinger +Date: Mon Jun 1 19:08:33 2009 -0400 + + Blackfin: add jtagconsole helper script + + This script is similar to the netconsole script, but instead works with + the JTAG console device driver that exists on Blackfin parts. + + Signed-off-by: Mike Frysinger + +commit 60f61e6d7655400bb785a2ef637581679941f6d1 +Author: Remy Bohmer +Date: Sat May 2 21:49:18 2009 +0200 + + Convert DM9000 driver for CONFIG_NET_MULTI + + All drivers need to be converted to CONFIG_NET_MULTI. + This patch converts the dm9000 driver. + + Signed-off-by: Thomas Smits + Signed-off-by: Remy Bohmer + Signed-off-by: Ben Warren + +commit 9131589ada4dda0718604d0a425ca46e52775f6e +Author: Prafulla Wadaskar +Date: Sun Jun 14 22:33:46 2009 +0530 + + net: Add Marvell Kirkwood gigabit ethernet driver + + This patch adds a egiga driver for the Marvell Kirkwood SoC's. + + Contributors: + Yotam Admon + Michael Blostein + Acked-by: Stefan Rose + Signed-off-by: Prafulla Wadaskar + Signed-off-by: Ben Warren + +commit 7835f4b94927ecb5affd99aad62592108db606ad +Author: s-paulraj@ti.com +Date: Tue May 12 11:45:34 2009 -0400 + + DaVinci Network Driver Updates + + Different flavours of DaVinci SOC's have differences in their EMAC IP + This patch does the following + 1) Updates base addresses for DM365 + 2) Updates MDIO frequencies for DM365 and DM646x + 3) Update EMAC wrapper registers for DM365 and DM646x + + Patch applies to u-boot-net git. the EMAC driver itself + will be updated shortly to add support for DM365 and DM646x + + Signed-off-by: Sandeep Paulraj + Signed-off-by: Ben Warren + +commit 44578bea14e49035331a8f0e000e935e0d830ff4 +Author: Richard Retanubun +Date: Tue May 26 08:29:29 2009 -0400 + + Subject: [PATCH] [repost] Standardize the use of MCFFEC_TOUT_LOOP as a udelay(1) loop counter. + + From 584b5fbd4abfc43f920cc1c329633e03816e28be Mon Sep 17 00:00:00 2001 + From: Richard Retanubun + Date: Wed, 20 May 2009 18:26:01 -0400 + Subject: [PATCH] Standardize the use of MCFFEC_TOUT_LOOP as a udelay(1) loop counter. + + Signed-off-by: Richard Retanubun + Signed-off-by: Ben Warren + +commit c9a2aab1512fb2d132670fff9c27656d2eb949cd +Author: Norbert van Bolhuis +Date: Thu Jun 4 09:39:48 2009 +0200 + + A VLAN tagged DHCP request/discover is 4 bytes short + + The problem is that BOOTP_SIZE uses ETHER_HDR_SIZE which is 14 bytes. + If sending a VLAN tagged frame (when env variable vlan is set) this + should be VLAN_ETHER_HDR_SIZE=18 which is what NetSetEther returns. + + Signed-off-by: Norbert van Bolhuis + Signed-off-by: Ben Warren + +commit 6e0d2fc7fe0dcfa2f51ab8931d706940ee364193 +Author: Ben Warren +Date: Tue Apr 28 16:39:19 2009 -0700 + + Remove support for non-CONFIG_NET_MULTI on PPC4xx EMAC + + Signed-off-by: Ben Warren + +commit 8453587ef9137daf98b7c9cf4f3b865f4039cea0 +Author: Ben Warren +Date: Tue May 26 00:34:07 2009 -0700 + + Switched davinci_emac Ethernet driver to use newer API + + Added CONFIG_NET_MULTI to all Davinci boards + Removed all calls to Davinci network driver from board code + Added cpu_eth_init() to cpu/arm926ejs/cpu.c + + Signed-off-by: Ben Warren + +commit 8cc13c13f1d154c8fa8fff56cea357ed38af76bf +Author: Ben Warren +Date: Mon Apr 27 23:19:10 2009 -0700 + + Initial cleanup of Davinci Ethernet driver + + Removed pointless #ifdefs + Moved functions around in file in preparation for switch to newer API + + Signed-off-by: Ben Warren + +commit 09cdd1b9b01450e91786d26ff3c866dc9c8d8d6b +Author: Ben Warren +Date: Tue May 26 00:17:59 2009 -0700 + + Moved Davinci Ethernet driver to drivers/net + + This driver has been renamed davinci_emac.c + + Signed-off-by: Ben Warren + +commit 6f51deb7f298413cfcb0a36d24c97ef7dd69d48f +Author: Prafulla Wadaskar +Date: Tue May 19 01:40:16 2009 +0530 + + Marvell MV88E61XX Switch Driver support + + Chips supported:- + 1. 88E6161 6 port gbe swtich with 5 integrated PHYs + 2. 88E6165 6 port gbe swtich with 5 integrated PHYs + 2. 88E6132 3 port gbe swtich with 2 integrated PHYs + Platform specific configuration supported for:- + default or router port vlan configuration + led_init configuration + mdip/n polarity reversal configuration + + Note: This driver is supported and tested against + kirkwood egiga interface + + Contributors: + Yotam Admon + Michael Blostein + Signed-off-by: Prafulla Wadaskar + Signed-off-by: Ben Warren + +commit 091dc9f6adaf572b067ae91af92c4e7db33d7903 +Author: Zach LeRoy +Date: Fri May 22 10:26:33 2009 -0500 + + tsec: Add support for BCM5482S PHY + + Signed-off-by: Zach LeRoy + Acked-by: Kumar Gala + Signed-off-by: Ben Warren + +commit 9ff67e5e4c719556d57f136a6453f8e4798d85c0 +Author: Mike Frysinger +Date: Sun Jun 14 06:29:07 2009 -0400 + + Blackfin: unify u-boot linker scripts + + All the Blackfin linker scripts were duplicated across the board dirs with + no difference save from the semi-often used ENV_IS_EMBEDDED option. So + unify all of them in the lib_blackfin/ dir and for the few boards that + need to embedded the environment directly, add a LDS_BOARD_TEXT define for + them to customize via their board config file. This is much simpler than + forcing them to duplicate the rest of the linker script. + + Signed-off-by: Mike Frysinger + +commit f52efcae98cbb8a39f1d0535df8d9646a776af9e +Author: Mike Frysinger +Date: Fri May 29 17:02:37 2009 -0400 + + Blackfin: bf518f-ezbrd: enable SST SPI flash driver + + The BF51xF parts have an internal SST SPI flash, so make sure the driver is + enabled by default so we can access it. + + Signed-off-by: Mike Frysinger + +commit f348ab85f741dc98b2d202c04b5f430eace94925 +Author: Mike Frysinger +Date: Fri Apr 24 17:22:40 2009 -0400 + + Blackfin: convert specific pre/post config headers to common method + + The Blackfin port was using asm/blackfin-config-{pre,post}.h to setup + common Blackfin board defines. The common method now is to use config.h, + so convert blackfin-config-post.h to that. Rename the still Blackfin + specific blackfin-config-pre.h to config-pre.h so the naming conventions + at least line up. + + Signed-off-by: Mike Frysinger + +commit 7c7503ee6cd03c0f3b16e98d33d5aa23b30d65b1 +Author: Mike Frysinger +Date: Fri Apr 24 17:11:47 2009 -0400 + + Blackfin: enable LZMA for all ADI boards + + Signed-off-by: Mike Frysinger + +commit 0e63dc0679451d48f8b727c543ce48b488f7a33f +Author: Mike Frysinger +Date: Mon Apr 13 05:52:45 2009 -0400 + + Blackfin: make default ADI env more flexible + + Allow boards to easily override the root= and default bootcmd, allow + people to tweak the file used in default bootcmds at runtime via one env + var, and add a stock nandboot command. + + Signed-off-by: Mike Frysinger + +commit 0f52b560f19623ec651f9b9b40405d138ec251d3 +Author: Hoan Hoang +Date: Sun Jan 18 22:44:17 2009 -0500 + + Blackfin: ibf-dsp561: new board port + + Signed-off-by: Hoan Hoang + Signed-off-by: Mike Frysinger + +commit 3088189a15d219c48fd7e71623ca4daa08b80b59 +Author: Mike Frysinger +Date: Sun Oct 12 23:28:33 2008 -0400 + + Blackfin: blackstamp: new board port + + Signed-off-by: Mike Frysinger + +commit 59ac9729700db1d4446c1a6db3ffe38398b7abb2 +Author: Mike Frysinger +Date: Sun Oct 12 23:22:25 2008 -0400 + + Blackfin: bf537-srv1: new board port + + Signed-off-by: Mike Frysinger + +commit d7fdc1410b5fa5ef623b35a283733b6bcee3753b +Author: Mike Frysinger +Date: Sun Oct 12 23:16:52 2008 -0400 + + Blackfin: bf537-minotaur: new board port + + Signed-off-by: Mike Frysinger + +commit cb4b5e874f3c9b882a6f4394bbebbbd91fd01bbf +Author: Mike Frysinger +Date: Sun Oct 12 23:08:03 2008 -0400 + + Blackfin: bf537-pnav: new board port + + Signed-off-by: Mike Frysinger + +commit 59e4be945b6469e31eee721e0bcdccf4940d75ac +Author: Mike Frysinger +Date: Sun Oct 12 21:55:45 2008 -0400 + + Blackfin: cm-bf527: new board port + + Signed-off-by: Mike Frysinger + +commit 8b219cf07c186cc9d97354cf4b14f24a53d193c5 +Author: Mike Frysinger +Date: Sun Oct 12 21:54:07 2008 -0400 + + Blackfin: cm-bf548: new board port + + Signed-off-by: Mike Frysinger + +commit 9417d9a21384279308abe5b4dd8dfd418742484c +Author: Mike Frysinger +Date: Sun Oct 12 21:49:28 2008 -0400 + + Blackfin: tcm-bf537: new board port + + Signed-off-by: Mike Frysinger + +commit e548321af00e869af7194896576beb9b68457ff7 +Author: Mike Frysinger +Date: Sun Oct 12 21:45:05 2008 -0400 + + Blackfin: cm-bf561: new board port + + Signed-off-by: Mike Frysinger + +commit 8a9bab08a6fe93e5f3bf57b90438f1d2a67fad3c +Author: Mike Frysinger +Date: Sun Oct 12 21:41:06 2008 -0400 + + Blackfin: cm-bf537e: new board port + + Signed-off-by: Mike Frysinger + +commit e82d8a1f028bedb12c4ab88a35a935010d92898c +Author: Mike Frysinger +Date: Sun Oct 12 21:36:22 2008 -0400 + + Blackfin: cm-bf533: new board port + + Signed-off-by: Mike Frysinger + +commit dd14af7640f7d48d8e9768eeeb09592e6f94ed38 +Author: Mike Frysinger +Date: Thu Nov 27 16:50:32 2008 -0500 + + Blackfin: new spibootldr command + + Newer Blackfin parts can an on-chip ROM that can boot LDRs over SPI flashes, + so add a new 'spibootldr' command to take advantage of it. + + Signed-off-by: Mike Frysinger + +commit 67c2829b646bb5b859088b36fbc89e971b9c1960 +Author: Mike Frysinger +Date: Mon Oct 6 04:42:33 2008 -0400 + + Blackfin: support embedding the environment into loader files (LDRs) + + For the most part, the Blackfin processor boots files in the LDR format + rather than binary/ELF files. So we want to export the environment as a + raw blob to the LDR utility so it can embed it at the right location. + + Signed-off-by: Mike Frysinger + +commit 31f30c9eb60d9ab0bd702e31f66345f99b34bdc6 +Author: Mike Frysinger +Date: Sun Jun 14 11:03:48 2009 -0400 + + add %.c->%.i and %.c->%.s rules + + The Linux kernel has some helper rules which allow you to quickly produce + some of the intermediary files from C source. Specifically, you can + create .i files which is the preprocessed output and you can create .s + files which is the assembler output. This is useful when you are trying + to track down header/macro expansion errors or inline assembly errors. + + Signed-off-by: Mike Frysinger + Acked-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 6d1ce387874c1060f27656f70151a52c511cd0e3 +Author: Mike Frysinger +Date: Sat May 30 01:02:03 2009 -0400 + + make sure toplevel $(SUBDIRS) is always declared + + The $(SUBDIRS) variable is only declared when U-Boot has been configured, + but it gets used all the time. In the non-configured case, it is used to + generate a helpful error message, but it needs to be set properly for that + to occur. + + Signed-off-by: Mike Frysinger + +commit 1260233982f7dfbdfd1adee12daa95a0c0e84a43 +Author: Grzegorz Bernacki +Date: Fri Jun 12 11:33:55 2009 +0200 + + digsy mtc: Add description to GPIO initial configuration. + + Signed-off-by: Grzegorz Bernacki + +commit 12304871bc7839145f2b4238923e9023616d7399 +Author: Grzegorz Bernacki +Date: Fri Jun 12 11:33:54 2009 +0200 + + digsy MTC: Add 'mtc' command. + + New command allows to: + o check FW version + o set LED status + o set digital output status + o get digital input status + + Signed-off-by: Grzegorz Bernacki + +commit f1f66edfc76f4a9f5b9f63972d90309784a8cae5 +Author: Grzegorz Bernacki +Date: Fri Jun 12 11:33:53 2009 +0200 + + digsy MTC: Add SPI support. + + Signed-off-by: Grzegorz Bernacki + +commit 6325b7780dad8be26ba6fc25ef88ba338c50205b +Author: Grzegorz Bernacki +Date: Fri Jun 12 11:33:52 2009 +0200 + + mpc52xx: Add SPI driver. + + Signed-off-by: Grzegorz Bernacki + +commit 5ec5529b82f314ca2cf9c262cdfc985d5fc468a0 +Author: Mike Frysinger +Date: Sun Jun 14 09:33:00 2009 -0400 + + allow boards to customize compiler options on a per-file/dir basis + + With our Blackfin boards, we like to build the compression routines with + -O2 as our tests show a pretty good size/speed tradeoff. For the rest of + U-Boot though, we want to stick with the default -Os as that is mostly + control code. So in our case, we would add a line like so to the board + specific config.mk file: + CFLAGS_lib_generic += -O2 + + Now all files under lib_generic/ will have -O2 appended to their build. + + Signed-off-by: Mike Frysinger + Acked-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 6b1f78ae6ad037382ad430b07064105c88f7ac02 +Author: Wolfgang Denk +Date: Sun Jun 14 21:30:39 2009 +0200 + + Prepare v2009.06 + + Update CHANGELOG, fix minor coding stylke issue. Update Makefile. + + Signed-off-by: Wolfgang Denk + commit c3147c1762f8caf99649051116a2411bdf887c10 Author: Wolfgang Denk -Date: Sun Jun 14 20:31:36 2009 +0200 +Date: Sun Jun 14 20:31:36 2009 +0200 + + Revert "SMC911x driver fixed for NFS boot" + + This reverts commit ca9c8a1e10fac01e6a1129f82a7ce18bd818fa43, + which causes compile warnings ("large integer implicitly truncated + to unsigned type") on all systems that use this driver. The warning + results from passing long constants (TX_CFG, RX_CFG) into + smc911x_set_mac_csr() which is declared to accept "unsigned + character" arguments only. + + Being close to a release, with nobody available to actually test the + code or the suggested fixes, it seems better to revert the patch. + +commit 388517e4b745b00256c2fa201ce7bccb67b4f245 +Author: Peter Tyser +Date: Fri May 22 10:26:37 2009 -0500 + + xes: Update Freescale clock code to work with 86xx processors + + Signed-off-by: Peter Tyser + Signed-off-by: Kumar Gala + +commit 25623937bb81cae788d767e6c59a11c96fc82866 +Author: Peter Tyser +Date: Fri May 22 10:26:36 2009 -0500 + + xes: Update Freescale DDR code to work with 86xx processors + + Signed-off-by: Peter Tyser + Signed-off-by: Kumar Gala + +commit bef3013908bbc68f24084174a3ca86cc2a3eb986 +Author: Peter Tyser +Date: Fri May 22 10:26:35 2009 -0500 + + xes: Update Freescale PCI code to work with 86xx processors + + Signed-off-by: Peter Tyser + Signed-off-by: Kumar Gala + +commit 6442b71b522face775c1c31bd43121db3b4bf7d6 +Author: Peter Tyser +Date: Fri May 22 10:26:32 2009 -0500 + + 85xx: Add PORBMSR and PORDEVSR shift defines + + Add defines similar to those already used for the the 86xx architecture. + This will ease sharing of PCI code between the 85xx and 86xx + architectures. + + Signed-off-by: Peter Tyser + Signed-off-by: Kumar Gala + +commit 2f21ce4d546d31289ac49a680f78bcc9a792c6ec +Author: Peter Tyser +Date: Thu May 21 12:10:00 2009 -0500 + + fsl/85xx, 86xx: Sync up DMA code + + The following changes were made to sync up the DMA code between the 85xx + and 86xx architectures which will make it easier to break out common + 8xxx DMA code: + + 85xx: + - Don't set STRANSINT and SPCIORDER fields in SATR register. These bits + only have an affect when the SBPATMU bit is set. + - Write 0xffffffff instead of 0xfffffff to clear errors in the DMA + status register. We may as well clear all 32 bits of the register... + + 86xx: + - Add CONFIG_SYS_MPC86xx_DMA_ADDR define to address DMA registers + - Add clearing of errors in the DMA status register when initializing + the controller + - Clear the channel start bit in the DMA mode register after a transfer + + Signed-off-by: Peter Tyser + Signed-off-by: Kumar Gala + +commit b1f12650d332eadac1306a772cab6096abee6ddd +Author: Peter Tyser +Date: Thu May 21 12:09:59 2009 -0500 + + fsl: Create common fsl_dma.h for 85xx and 86xx cpus + + Break out DMA structures for the Freescale MPC85xx and MPC86xx cpus to + reduce a large amount of code duplication + + Signed-off-by: Peter Tyser + Signed-off-by: Kumar Gala + +commit 3bd8e532b5de20647aeaff94a1cbf33fb8b897b9 +Author: Haiying Wang +Date: Wed May 20 12:30:41 2009 -0400 + + 85xx: Add UEC6 and UEC8 at SGMII mode for MPC8569MDS + + On MPC8569MDS board, UCC6 and UCC8 can be configured to work at SGMII mode via + UEM on PB board. Since MPC8569 supports up to 4 Gigabit Ethernet ports, we + disable UEC6 and UEC8 by default. + + Signed-off-by: Haiying Wang + Signed-off-by: Kumar Gala + +commit e8efef7c1b457442583a8b9d38d8a5b667661616 +Author: Haiying Wang +Date: Thu Jun 4 16:12:42 2009 -0400 + + drivers/qe: add sgmii support in for UEC driver + + Signed-off-by: Haiying Wang + Signed-off-by: Kumar Gala + +commit 8e55258f144764de8902e9f078a7ad4c6c022c2f +Author: Haiying Wang +Date: Thu Jun 4 16:12:41 2009 -0400 + + qe: Pass in uec_info struct through uec_initialize + + The uec driver contains code to hard code configuration information for the uec + ethernet controllers. This patch creates an array of uec_info structures, which + are then parsed by the corresponding driver instance to determine configuration. + It also creates function uec_standard_init() to initialize all UEC interfaces + for 83xx and 85xx. + + Signed-off-by: Haiying Wang + Signed-off-by: Kumar Gala + +commit 9a6110897fc9282ade598bbba70ad72b940436e3 +Author: Haiying Wang +Date: Thu Jun 4 16:12:40 2009 -0400 + + fsl: Update the number of ethxaddr in reading system eeprom + + We support up to 8 mac addresses in system eeprom, so we define the macro + MAX_NUM_PORTS to limit the mac_count to 8, and update the number of ethxaddr + according to mac_count. + + Signed-off-by: Haiying Wang + Signed-off-by: Kumar Gala + +commit f82107f637f167a77803c0933f9b24741a91c711 +Author: Haiying Wang +Date: Wed May 20 12:30:37 2009 -0400 + + 85xx: Add RMII support for MPC8569MDS + + This patch supports UCC working at RMII mode on PIB board, fixup fdt blob to + support rmii in kernel. It also changes the name of enable_mpc8569mds_qe_mdio to + enalbe_mpc8569mds_qe_uec which is more accurate. + + Signed-off-by: Haiying Wang + Signed-off-by: Kumar Gala + +commit 750098d33bc362ac4263863e92da158cf011063f +Author: Haiying Wang +Date: Wed May 20 12:30:36 2009 -0400 + + 85xx: Add UEC3 and UEC4 support for MPC8569MDS + + Signed-off-by: Haiying Wang + Signed-off-by: Kumar Gala + +commit 4e7b25e4fe777f525e426cbd58c3a3976c564f2e +Author: Haiying Wang +Date: Wed May 20 12:30:35 2009 -0400 + + drivers/qe: Add more SNUM number for QE + + Some QE chips like 8569 need more SNUM numbers for supporting 4 UECs in RGMII- + 1000 mode. + + Signed-off-by: Haiying Wang + Acked-by: Timur Tabi + Signed-off-by: Kumar Gala + +commit 7211fbfa18f3061858696150ee6e9e093d9eceae +Author: Haiying Wang +Date: Thu May 21 15:34:14 2009 -0400 + + drivers/qe: Change QE RISC ALLOCATION to support 4 RISCs + + Also define the QE_RISC_ALLOCATION_RISCs to MACROs instead of using enum, and + define MAX_QE_RISC for QE based silicons. + + Signed-off-by: Haiying Wang + Acked-by: Timur Tabi + Signed-off-by: Kumar Gala + +commit b3d7f20f43a0f8d11c65e2f92153b5512b11580c +Author: Haiying Wang +Date: Wed May 20 12:30:29 2009 -0400 + + 85xx: Add QE clk support + + Signed-off-by: Haiying Wang + Acked-by: Timur Tabi + Signed-off-by: Kumar Gala + +commit 71b358cc26792889bbac35054d8e89d59b3fabc4 +Author: Kumar Gala +Date: Wed May 20 01:11:33 2009 -0500 + + 85xx: Added MPC8535/E identifiers + + Signed-off-by: Kumar Gala + +commit 22419d77976bbd0df9fcf45513f1b96bd73e50d1 +Author: Kumar Gala +Date: Thu May 21 08:36:43 2009 -0500 + + 85xx: Always attempt ethernet device tree fixup + + Its reasonable that we may have ethernet devices but dont have drivers + or support enabled for them in u-boot and want the device tree fixed up. + Unconditionally calling the ethernet fixup is fine since if we dont have + ethernet nodes that match (or aliases) we will not attempt to do + anything. + + Signed-off-by: Kumar Gala + Acked-by: Timur Tabi + +commit 52d6ad5ecfb22938441c8e3e62935fbd7b0f0920 +Author: Haiying Wang +Date: Thu May 21 15:32:13 2009 -0400 + + drivers/qe: Rename the camel-case identifiers in uec + + Rename riscRx/riscTx to risc_rx/risc_tx to comply with Codingstyle. + + Signed-off-by: Haiying Wang + +commit feb7838f979ec2b581df3c791b9ae3284c36bb47 +Author: Srikanth Srinivasan +Date: Fri Apr 3 15:36:13 2009 -0500 + + 85xx: Add P2020DS support + + The patch adds support for P2020DS reference platform. + DDR3 interface uses hard-coded initialization rather than SPD + for now and was tested at 667Mhz. Some PIXIS register + definitions and associated code sections need to be fixed. + TSEC1/2/3, NOR flash, MAC/SYS ID EEPROM, PCIE1/2/3 are all + tested under u-boot. + + Signed-off-by: Srikanth Srinivasan + Signed-off-by: Travis Wheatley + Signed-off-by: Kumar Gala + +commit 229549a56d9ae413c00f64fd7c728c6879a1b54b +Author: Stefan Roese +Date: Tue Jun 9 16:57:47 2009 +0200 + + mpc512x: MPC5121ADS: Add NAND support + + This patch adds NAND support to the MPC5121ADS board. Please + note that the image size increased since NAND support didn't + fit in the current image size (256k). + + Signed-off-by: Stefan Roese + Signed-off-by: Wolfgang Denk + Cc: Wolfgang Denk + +commit 35f2edbb6cad043ccd5ea6e78fe9b7aa21d8395f +Author: Stefan Roese +Date: Tue Jun 9 16:57:03 2009 +0200 + + nand/mpc512x: Add MPC512x NAND support (NFC) + + This patch adds NAND Flash Controller driver for MPC5121 revision 2. + All device features, except hardware ECC and power management, are + supported. + + This NFC driver replaces the one orignally posted by John Rigby: + + "[PATCH] Freescale NFC NAND driver" + + It's a port of the Linux driver version posted by Piotr Ziecik a few + weeks ago. Using this driver has the following advantages (from my + point of view): + + - Compatibility with the Linux NAND driver (e.g. ECC usage) + - Better code quality in general + - Resulting U-Boot image is a bit smaller (approx. 3k) + - Better to sync with newer Linux driver versions + + The only disadvantage I can see, is that HW-ECC is not supported right + now. But this could be added later (e.g. port from Linux driver after + it's supported there). Using HW-ECC on the MCP5121 NFC has a general + problem because of the ECC usage in the spare area. This collides with + JFFS2 for example. + + Signed-off-by: Stefan Roese + Cc: Piotr Ziecik + Cc: Wolfgang Denk + Cc: John Rigby + Cc: Scott Wood + +commit e53b507cee5d976953134a565c72fd32c967d7dd +Author: Stefan Roese +Date: Tue Jun 9 11:50:40 2009 +0200 + + mpc512x: Add esd gmbh mecp5123 board support + + MECP5123 is a MPC5121E based module by esd gmbh. + + Signed-off-by: Stefan Roese + Cc: Reinhard Arlt + +commit 6bd55cc65d0c3aa84d719518254fb3c650239ed9 +Author: Stefan Roese +Date: Tue Jun 9 11:50:05 2009 +0200 + + mcp512x: Add macros for SCFR LPC divisor access + + Thos macros will be used by the esd mecp5123 board. + + Signed-off-by: Stefan Roese + +commit c60dc8527dbb2a1318c03bc18bdebcfbd0164551 +Author: Stefan Roese +Date: Mon Jun 8 09:38:07 2009 +0200 + + mpc512x: Fix problem with I2C access before relocation + + This is needed for the upcoming esd MECP5123 board port which uses + I2C EEPROM for environment storage. + + Signed-off-by: Stefan Roese + Cc: Reinhard Arlt + Acked-by: Heiko Schocher + +commit 58f10460b05e0928d986b15edd4f2e1e99403f7e +Author: Stefan Roese +Date: Thu Jun 4 13:35:39 2009 +0200 + + 74xx_7xx: CPCI750: Add CPCI adapter/target support + + The CPCI750 can be built as CPCI host or adapter/target board. This patch + adds support for runtime detection of those variants. + + Signed-off-by: Stefan Roese + Cc: Reinhard Arlt + +commit ae7a2739d7a0704437376e229bb21940952c55be +Author: Stefan Roese +Date: Fri Jun 5 05:45:41 2009 +0200 + + 74xx_7xx: CPCI750: Enable access to PCI function > 0 + + The Marvell bridge 64360 supports serveral PCI functions, not only 0. This + patch enables access to those functions. + + Signed-off-by: Stefan Roese + Cc: Reinhard Arlt + +commit e5b563e9ec54c3f6d702c8fa2b711b4a6150243a +Author: Stefan Roese +Date: Thu Jun 4 13:35:37 2009 +0200 + + 74xx_7xx: CPCI750: Minor coding style cleanup of cpci750.c + + Signed-off-by: Stefan Roese + Cc: Reinhard Arlt + +commit 0e5ef07d0d91bd3d87ebea0534f538561aa974d5 +Author: Stefan Roese +Date: Thu Jun 4 13:35:36 2009 +0200 + + 74xx_7xx: CPCI750: Add loadpci command + + This command is used to load/boot an OS-image which is transferred from + the CPCI host to the CPCI target/adapter. + + Signed-off-by: Stefan Roese + Cc: Reinhard Arlt + +commit 0a14d6b8f4d21ff59a9b7686a49a77069a9fcd2a +Author: Stefan Roese +Date: Thu Jun 4 13:35:35 2009 +0200 + + 74xx_7xx: CPCI750: Add commandline editing/history + + Signed-off-by: Stefan Roese + Cc: Reinhard Arlt + +commit 60cfe87bd39e6f07f2b92eb4bff82bfd105f4724 +Author: Stefan Roese +Date: Thu Jun 4 16:55:34 2009 +0200 + + UBI: Add compile-time check for correct malloc area configuration + + UBI is quite memory greedy and requires at least approx. 512k of malloc + area. This patch adds a compile-time check, so that boards will not + build with less memory reserved for this area (CONFIG_SYS_MALLOC_LEN). + + Signed-off-by: Stefan Roese + +commit 7ce6031afc8671c8b47c6135b3678d43fcd02852 +Author: Prafulla Wadaskar +Date: Mon Apr 6 21:24:43 2009 +0530 + + sf: new Macronix MX25xx SPI flash driver + + Added macronix SF driver for MTD framework + MX25L12805D is supported and tested + TBD: sector erase implementation, other deivces support + + Signed-off-by: Prafulla Wadaskar + Signed-off-by: Mike Frysinger + +commit 2a6cc58869305f346e389eefdfa96dea5146cb0c +Author: Todor I Mollov +Date: Sat Apr 4 07:14:44 2009 -0400 + + sf: atmel: implement power-of-two write/erase funcs + + Signed-off-by: Todor I Mollov + Signed-off-by: Mike Frysinger + CC: Haavard Skinnemoen + +commit 4bc6eb79be2a7317425575184324b94e3b43fbc2 +Author: Vivek Mahajan +Date: Mon May 25 17:23:18 2009 +0530 + + mpc85xx: 8536ds: Add USB related CONFIGs + + This patch adds CONFIGs for enabling USB in mpc8536ds and also + adds usb_phy_type in CONFIG_EXTRA_ENV_SETTINGS. Also revamps its + Copyright. + + Signed-off-by: Vivek Mahajan + Signed-off-by: Remy Bohmer + +commit 6823e9b01290977c4d9c90381459c01f66e12e79 +Author: Vivek Mahajan +Date: Mon May 25 17:23:17 2009 +0530 + + mpc83xx: 8315erdb: Add USB related CONFIGs + + This patch adds CONFIGs for enabling USB in mpc8315erdb and also + adds usb_phy_type in CONFIG_EXTRA_ENV_SETTINGS. Also revamps its + Copyright. + + Signed-off-by: Vivek Mahajan + Signed-off-by: Remy Bohmer + +commit a07bf180efc3c0de4a89a3bd49a7c7584dfb95a8 +Author: Vivek Mahajan +Date: Thu May 21 17:32:48 2009 +0530 + + mpc85xx: USB: Add support + + The following patch adds 85xx-specific USB support and also + revamps Copyright in immap_85xx.h + + Signed-off-by: Vivek Mahajan + Signed-off-by: Remy Bohmer + +commit 4ef01010aa4799c759d75e67007fdd3a38c88c8a +Author: Vivek Mahajan +Date: Mon May 25 17:23:16 2009 +0530 + + mpc83xx: USB: Reorganized its support + + The following patch reorganizes/reworks the USB support for mpc83xx + as under:- + + * Moves the 83xx USB clock init from drivers/usb/host/ehci-fsl.c to + cpu/mpx83xx/cpu_init.c + + * Board specific usb_phy_type is read from the environment + + * Adds USB EHCI specific structure in include/usb/ehci-fsl.h + + * Copyrights revamped in most of the following files + + Signed-off-by: Vivek Mahajan + Signed-off-by: Remy Bohmer + +commit ed90d2c87158e5114b6009fa95bb6417e4b27b3e +Author: Vivek Mahajan +Date: Thu May 21 17:32:27 2009 +0530 + + mpc8xxx: USB: Relocates ehci-fsl.h to include/usb + + The following patch moves 8xxx-specifc USB #defines from + drivers/usb/host/ehci-fsl.h to include/usb. + + Signed-off-by: Vivek Mahajan + Signed-off-by: Remy Bohmer + +commit cfd39cdf9422d3d25e9b3c058865f4c1f66f34da +Author: Vivek Mahajan +Date: Thu May 21 17:32:15 2009 +0530 + + mpc8xxx: USB: Removed reenablement of its interface + + To prepare for the 85xx USB support, which requires interface enablement + only once in (specified) order, no different than instructions for + enabling the interface under 83xx. It is unknown why the original author + enabled the interface twice (checked for references in errata, etc). + + Signed-off-by: Vivek Mahajan + Signed-off-by: Remy Bohmer + +commit 2c7920afaf96d9779304202cd8a355b4f7576a83 +Author: Peter Tyser +Date: Fri May 22 17:23:25 2009 -0500 + + 83xx: Replace CONFIG_MPC83[0-9]X with MPC83[0-9]x + + Use the standard lowercase "x" capitalization that other Freescale + architectures use for CPU defines to prevent confusion and errors + + Signed-off-by: Peter Tyser + Signed-off-by: Kim Phillips + +commit 0f898604945af4543c1525fc33b6bae621a3b805 +Author: Peter Tyser +Date: Fri May 22 17:23:24 2009 -0500 + + 83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xx + + Use the standard lowercase "xx" capitalization that other Freescale + architectures use for CPU defines to prevent confusion and errors + + Signed-off-by: Peter Tyser + Signed-off-by: Kim Phillips + +commit ba4feae90ca71de1681d5808f17e73224d8f03c4 +Author: Stefan Roese +Date: Tue Jun 2 16:53:16 2009 +0200 + + mpc512x: Use serial_setbrg() in serial_init() to not duplicate the code + + This patch removes the duplicated code for baudrate generator configuration + in the PSC serial_init() implementation by calling serial_setbrg() instead + of duplicating the code. + + Signed-off-by: Stefan Roese + +commit b8c1d6a54ff8195488b68e163de8ec31f1603496 +Author: Stefan Roese +Date: Tue Jun 2 16:53:15 2009 +0200 + + mpc512x: Fix PSC divisor calculation for baudrate setting + + The wrong input frequency was used in serial_setbrg(). This patch fixes + this by using ips_clk as input frequency for the PSC baudrate generator. + + Signed-off-by: Stefan Roese + +commit 52568c3654b2b257016d52167805ae132faac14e +Author: Wolfgang Denk +Date: Sat May 16 10:47:46 2009 +0200 + + MPC512x: add support for ARIA board + + ARIA is a MPC5121E based COM Express module by Dave/DENX. + + Signed-off-by: Wolfgang Denk + Cc: John Rigby + +commit 3b74e7ec58e2cc352b0a396a614065cfeb8d138f +Author: Wolfgang Denk +Date: Sat May 16 10:47:45 2009 +0200 + + MPC512x: remove include/mpc512x.h + + Move needed definitions (register descriptions etc.) from + include/mpc512x.h into include/asm-ppc/immap_512x.h. + + Instead of using a #define'd register offset, use a function that + provides the PATA controller's base address. + + All the rest of include/mpc512x.h are register offset definitions + which can be eliminated by proper use of C structures. + + There are only a few register offsets remaining that are needed in + cpu/mpc512x/start.S; for these we provide cpu/mpc512x/asm-offsets.h + which is intended as a temporary workaround only. In a later patch + this file will be removed, too, and then auto-generated from the + respective C structs. + + Signed-off-by: Wolfgang Denk + Cc: John Rigby + +commit a927e491b2a326c1e9c4313e3ce4042988422697 +Author: Wolfgang Denk +Date: Sat May 16 10:47:44 2009 +0200 + + MPC512x FEC: get rid of duplicated struct ethernet_regs + + Use existing struct fec512x instead. + + Signed-off-by: Wolfgang Denk + Cc: John Rigby + Acked-by: Ben Warren + +commit 843efb1192cc8fd4f904a23dbab4e0fe3e1c5bc2 +Author: Wolfgang Denk +Date: Sat May 16 10:47:43 2009 +0200 + + MPC512x: use I/O accessors instead of pointer accesses + + This commit changes the MPC512x code to use I/O accessor calls (i.e. + out_*() and in_*()) instead of using deprecated pointer accesses. + + Signed-off-by: Wolfgang Denk + Cc: John Rigby + +commit 19dc7e179268be148e550c36203208c662610d76 +Author: Wolfgang Denk +Date: Sat May 16 10:47:42 2009 +0200 + + MPC512x: add more hardware description to immap_512x.h + + - add GPIO module description + - add Address Latch Timing Register description + - add IO Control Memory Map + - add FEC Memory Map + + Also change board/freescale/mpc5121ads/mpc5121ads.c and + cpu/mpc512x/iopin.c as needed. + + Signed-off-by: Wolfgang Denk + Cc: John Rigby + +commit 72601d04fdfdd4c7597afcf1f6aab654bd99366c +Author: Wolfgang Denk +Date: Sat May 16 10:47:41 2009 +0200 + + Rename ads5121 board into mpc5121ads + + We rename the board so we use a consistent name in U-Boot and in + Linux. Also, we use this opportunity to move the board into the + Freecale vendor directory. + + Signed-off-by: Wolfgang Denk + Cc: John Rigby + +commit debf87415579c0f50aab9e0832976d4506babe0f +Author: Wolfgang Denk +Date: Sat May 16 10:47:40 2009 +0200 + + cpu/mpc512x/diu.c: fix warning: assignment from incompatible pointer type + + Signed-off-by: Wolfgang Denk + Cc: John Rigby + +commit 8b251263191ec554967dd1add6237c1ba7f7eb25 +Author: Wolfgang Denk +Date: Sat May 16 10:47:39 2009 +0200 + + cpu/mpc512x/pci.c: minor coding style cleanup + + Get rid of variable declaration in the middle of the code. + + Signed-off-by: Wolfgang Denk + Cc: John Rigby + +commit de26ef99bddbce4ed225f93afcf0bee99c3b6f87 +Author: Wolfgang Denk +Date: Sat May 16 10:47:38 2009 +0200 + + mpc512x: Move common files to share them by several boards + + We will soon see several new MPC521x based boards added. This patch + moves files that are not board specific to a common directory so they + can be shared by all such ports. It also splits off common IDE code + into a new file, cpu/mpc512x/ide.c . + + Signed-off-by: Wolfgang Denk + Cc: John Rigby + +commit 03e069dc0a765d506f78a68319acf33d432e035b +Author: Wolfgang Denk +Date: Sat May 16 10:47:37 2009 +0200 + + mpc512x: change cpu/mpc512x/Makefile to use Kconfig style + + Signed-off-by: Wolfgang Denk + Cc: John Rigby + +commit a89c33db96a1e55319a286dd4c3c05ca64ac6bfd +Author: Wolfgang Denk +Date: Sun May 24 17:06:54 2009 +0200 + + General help message cleanup + + Many of the help messages were not really helpful; for example, many + commands that take no arguments would not print a correct synopsis + line, but "No additional help available." which is not exactly wrong, + but not helpful either. + + Commit ``Make "usage" messages more helpful.'' changed this + partially. But it also became clear that lots of "Usage" and "Help" + messages (fields "usage" and "help" in struct cmd_tbl_s respective) + were actually redundant. + + This patch cleans this up - for example: + + Before: + => help dtt + dtt - Digital Thermometer and Thermostat + + Usage: + dtt - Read temperature from digital thermometer and thermostat. + + After: + => help dtt + dtt - Read temperature from Digital Thermometer and Thermostat + + Usage: + dtt + + Signed-off-by: Wolfgang Denk + +commit 94796d8544d4248028141bad11c6a74b840e9d6e +Author: Wolfgang Denk +Date: Sun May 24 19:17:29 2009 +0200 + + Make "usage" messages more helpful. + + In case of incorrect command invocations U-Boot used to print pretty + useless "usage" messages, for example: + + => nand markbad + Usage: + nand - NAND sub-system + + In the result, the user would have to run the "help" command to get + the (available) information about correct command usage. Change this, + so that this information gets always printed. + + Note that this changes the user interface of all commands, but + hopefully to the better. + + Signed-off-by: Wolfgang Denk + +commit 4c94f6c54bbc4dc5f418da01d8ec01e2adf636be +Author: Mike Frysinger +Date: Sun May 24 02:26:19 2009 -0400 + + nvedit: speed up printing of environment + + The printing code would check the same environment byte multiple times and + write to the console one byte at a time. For some devices (such as the + Blackfin JTAG console which operates in 8 bytes at a time), this is pretty + damned slow. So create a small 16 byte buffer to fill up and send to puts + as needed. In the process, unify the different print functions, shrink + the resulting code (source and compiled), and avoid excess env reads as + those too can be somewhat expensive depending on the board. + + Signed-off-by: Mike Frysinger + +commit 3112030a430553768de5d30c05bedf8710784452 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri May 22 19:28:52 2009 +0200 + + config.mk: remove un-needed REMOTE_BUILD check + + as $(obj) is empty when in tree build + + %.s: %.S + $(CPP) $(AFLAGS) -o $@ $< + + and + + $(obj)%.s: %.S + $(CPP) $(AFLAGS) -o $@ $< + + are the same + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Acked-by: Mike Frysinger + +commit 651351fe980b20217b014b9a888398f18d77951c +Author: Tom Rix +Date: Wed May 20 07:55:41 2009 -0500 + + FAT replace compare_sign with strncmp. + + The static function compare_sign is only used to compare the fs_type string + and does not do anything more than what strncmp does. + + The addition of the trailing '\0' to fs_type, while legal, is not needed + because the it is never printed out and strncmp does not depend on NULL + terminated strings. + + Signed-off-by: Tom Rix + +commit ecb1dc892297d5d99876907328fed732feefeab2 +Author: Mike Frysinger +Date: Wed May 20 04:35:14 2009 -0400 + + Add support for Linux-like kallsysms + + The kernel stores address<->symbol names in it so things can be decoded at + runtime. Do it in U-Boot, and we get nice symbol decoding when crashing. + + Signed-off-by: Mike Frysinger + +commit 36c9169aa6f79ddf604a3bca64e145654f94888b +Author: Wolfgang Denk +Date: Sun May 17 16:01:54 2009 +0200 + + cmd_mtdparts.c: allow to omit definitions for default settings + + There is actually no good reason to enforce that all board + configuations must define default settings for "mtdids" and + "mtdparts". Actually this may be difficult to handle, especially on + boards where different sizes of flash chips can be fit, so there is no + real "default" partition map for all boards. + + Lift this arbitrary limitation. + + Signed-off-by: Wolfgang Denk + +commit 864aa034f3a0e10ce710e8bbda171df3cab59414 +Author: Stefan Roese +Date: Tue May 12 14:31:56 2009 +0200 + + cmd_mtdparts: Move to common handling of FLASH devices via MTD layer + + This patch removes all references to the direct CFI FLASH interface + (via flash_info[]). Now that all FLASH types currently handled in + mtdparts are available (if selected, see below) via the MTD infrastructure. + This is NOR, NAND and OneNAND right now. This can be achieved by defining + the following options: + + CONFIG_MTD_DEVICE (for all FLASH types) + + plus + + CONFIG_FLASH_CFI_MTD (for NOR FLASH) + + So we need to add those defines to the board config headers currently + using the mtdparts commands. This is done via another patch, so + we shouldn't break mtdparts compatibility. + + One big advantage from this solution is that the cmd_mtdparts.c is + *much* cleaner now. Lot's of #ifdef's are removed and the code itself + is smaller. Additionally the newly added MDT concatenation feature + can new be used via the mtdparts infrastructure and therefor via + UBI etc. + + Signed-off-by: Stefan Roese + Cc: Ladislav Michl + Cc: Scott Wood + +commit d558107c18708050f05b6639b2192efb67c905dc +Author: Stefan Roese +Date: Tue May 12 14:31:18 2009 +0200 + + mtd: Introduce CONFIG_MTD_DEVICE to select compilation of mtdcore.o + + This new define enables mtdcore.c compilation and with this we can + select the MTD device infrastructure needed for the reworked mtdparts + command. + + We now have the 2 MTD infrastructure defines, CONFIG_MTD_DEVICE and + CONFIG_MTD_PARTITIONS. CONFIG_MTD_DEVICE is needed (as explained above) + for the "mtdparts" command and CONFIG_MTD_PARTITIONS is needed for UBI. + + Signed-off-by: Stefan Roese + Cc: Scott Wood + +commit 942556a92a8c1eb1bd76584a5143f6f57dcb25ad +Author: Stefan Roese +Date: Tue May 12 14:32:58 2009 +0200 + + mtd: MTD related config header changes (mtdparts command) + + By changing the cmd_mtdparts to only use the MTD infrastructure and + not the direct interface to the CFI NOR FLASH driver we now need + to add the MTD infrastructure to all boards using those mtdparts + commands. This patch adds those components: + + CONFIG_MTD_DEVICE (for all FLASH types) + + plus + + CONFIG_FLASH_CFI_MTD (for NOR FLASH) + + To all board maintainers: Please test this on your platforms and + report any problems/issues found. Thanks. + + Signed-off-by: Stefan Roese + Cc: Wolfgang Denk + Cc: Ron Madrid + Cc: Georg Schardt + Cc: Michal Simek + Cc: Ladislav Michl + Cc: Martin Krause + Cc: Gary Jennejohn + Cc: Ricardo Ribalda + +commit 8d2effea23e938631126a7888008a0637e13b389 +Author: Stefan Roese +Date: Mon May 11 16:03:55 2009 +0200 + + mtd: Update MTD infrastructure to support 64bit device size + + This patch brings the U-Boot MTD infrastructure in sync with the current + Linux MTD version (2.6.30-rc3). Biggest change is the 64bit device size + support and a resync of the mtdpart.c file which has seen multiple fixes + meanwhile. + + Signed-off-by: Stefan Roese + Cc: Scott Wood + Cc: Kyungmin Park + +commit 0a57265533c412adf6024f4b4955141f4346b2b9 +Author: Stefan Roese +Date: Tue May 12 14:29:39 2009 +0200 + + mtd: Add MTD concat support to concatenate multiple MTD NOR devices + + This patch adds concatenation support to the U-Boot MTD infrastructure. + By enabling CONFIG_MTD_CONCAT this MTD CFI wrapper will concatenate + all found NOR devices into one single MTD device. This can be used by + e.g by UBI to access a partition that spans over multiple NOR chips. + + Signed-off-by: Stefan Roese + +commit 55e0ed6078b10b0d425b6a0677f38a015c277df6 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Apr 25 14:57:52 2009 +0200 + + make MODEM SUPPORT generic instead of duplicate it + + and fix comment + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + + Adjusted Copyright message. + + Signed-off-by: Wolfgang Denk + +commit a30f519bd0cde78ba46b424314de94fdab863726 +Author: Tom Rix +Date: Tue Jun 2 20:53:56 2009 -0500 + + ZOOM2 detect the version of the zoom2 board at runtime. + + There are currently 3 versions of the zoom2 board. + The production board, that is currently being released. + The beta board, similar in form to the production board but not released. + The alpha board, a set of PCBs with a very limited circulation. + + GPIO 94 is used to determine the version of the board. If GPIO 94 is clear, + the board is a production board, otherwise it is a beta board. + + The alpha board will likely be mistaken for a beta board. An alpha board + was unavailible for testing. + + This has been tested on the beta and production boards. + + Signed-off-by: Tom Rix + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 718763c4745fd3d987a5576d2a67325e9444f9d4 +Author: Tom Rix +Date: Wed Jun 3 01:53:57 2009 -0500 + + Beagle Convert the board version detection to use the OMAP3 GPIO interface. + + There is no new functionality in the change. + + This change is a conversion from the using raw register access to using + the OMAP3 GPIO API described in doc/README.omap3. + + Signed-off-by: Tom Rix + Acked-by: Dirk Behme + +commit 7caa13fdd2d3dc957b4e0a228810a3a4a8ba499b +Author: Tom Rix +Date: Wed Jun 3 01:53:55 2009 -0500 + + Fix a typo in the instructions on using omap3's gpio interface. + + Using the example for reading a gpio, shows the problem. + NULL should be the gpio number. + + Signed-off-by: Tom Rix + Acked-by: Dirk Behme + +commit 0c9520efd651ce13451654a35307ec87d4a13a69 +Author: Tom Rix +Date: Fri May 29 18:57:32 2009 -0500 + + ZOOM2 Define GPIO banks used. + + Enable the function and interface clocks for banks 2,3,5 and 6. + + Signed-off-by: Tom Rix + Acked-by: Dirk Behme + +commit 708cfb74b7c6df9c37d3c48988a154be79daefeb +Author: Tom Rix +Date: Fri May 29 18:57:31 2009 -0500 + + OMAP3 Turn on the GPIO bank clocks + + The function and interface clocks for each GPIO bank, except the first, must + be explicitly turned on. These are controlled by the config level defines + CONFIG_OMAP3_GPIO_n where n is from 2 to 6. + + Signed-off-by: Tom Rix + Acked-by: Dirk Behme + +commit 59272620c24549b5bcd03c94ba12ec302c1476a2 +Author: Richard Retanubun +Date: Thu Mar 26 15:26:01 2009 -0400 + + Coldfire M5271: Activate u-boot system timer interrupt. + + This patch assigns the u-boot system timer interrupt to + interrupt level 3, priority 6. Without this patch the interrupt + will be a level 0, priority 0, which disables it and cause + u-boot functions that relies on the timer (e.g. sleep command) + to never return. + + Signed-off-by: Richard Retanubun + +commit dc26965ad3acdfb18780361d77a276b2843a90af +Author: Richard Retanubun +Date: Mon Mar 23 13:35:48 2009 -0400 + + Compier warning cleanup + + Follow up to git commit: 19b5b533ccd522abeb501d510750693c35e20456 + + Cleanup on compiler warnings on unused variables now that + bd->bi_enetaddr is no longer used. + + Signed-off-by: Richard Retanubun + +commit 42a83765d54f042b4079e05a3438789542429981 +Author: Richard Retanubun +Date: Fri Mar 20 15:30:10 2009 -0400 + + Adds WATCHDOG_RESET() function call to lib_m68k dtimer_interrupt. + + Ported from lib_ppc/interrupts.c, this adds the ability for + the coldfire system timer to auto-reset the watchdog when + dtimer_interrupts is called. + + Signed-off-by: Richard Retanubun + +commit a24d96e40e1ca66dde6e6c158e7ecffafc5a2199 +Author: Prafulla Wadaskar +Date: Sun May 31 14:53:20 2009 +0200 + + arch_misc_init support for ARM architectures + + This patch is required for Kirkwood support + may be used by other ARM architectures + + Signed-off-by: Prafulla Wadaskar + +commit b2403589b4d9996394bafc73eca3623f43ac2c31 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun May 31 14:53:18 2009 +0200 + + at91: move cpu info print to cpu + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit b32e189079fa16e1b647ac6b949fd4e0a9435343 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun May 31 12:44:46 2009 +0200 + + at91: move cpu name define to arm/arch/ cpu header + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 5bb59b3c906ee01adfaac9565443e5236a793079 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun May 31 12:44:45 2009 +0200 + + at91: extract reset from timer + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 61cf851b09cf8b67009ec11fc47c16add6b142a5 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun May 31 12:44:43 2009 +0200 + + omap24xx: rename reset file + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 9d4fc99dbdbfda1260aad478e83fca7cdf0e1a32 +Author: Dirk Behme +Date: Sun May 31 12:44:42 2009 +0200 + + OMAP3: Fix CKE1 MUX setting to allow self-refresh + + The Beagle rev Cx and Overo boards are using both SDRC CSes. The MUX + setting is needed for the second CS clock signal to allow the 2 RAM + parts to be put in self-refresh correctly. This also works on rev B + Beagle boards with 128M of RAM. + + From: Steve Sakoman + From: Jean Pihet + Signed-off-by: Jean Pihet + Signed-off-by: Steve Sakoman + Signed-off-by: Dirk Behme + +commit 3962c4f9fc4482a6547f3c3d3d5e986e625abb8a +Author: Dirk Behme +Date: Sun May 31 12:44:41 2009 +0200 + + OMAP3: Zoom2: Enable Board and CPU info + + With other OMAP3 boards we recently switched to CPU and Board + info API. From parallel merge, this is missing for Zoom2. + Enable it for Zoom2, too. + + Signed-off-by: Dirk Behme + Acked-by: Tom Rix + +commit 83ae698ff26b81b569ca32f7f2b008ad0da15e66 +Author: Tom Rix +Date: Sun May 31 12:44:39 2009 +0200 + + ZOOM2 Add led support. + + This patch controls the large LED on the top left of the zoom2. + + Signed-off-by: Tom Rix + +commit 660888b7fb8840ce169dcd2589e49ab44c46b87b +Author: Tom Rix +Date: Sun May 31 12:44:37 2009 +0200 + + ZOOM2 Add serial support. + + Zoom2 serial is in general supplied by one of the 4 UARTS on the debug board. + The default serial is from the USB connector on left side of the debug board. + The USB connector will produce 2 of the 4 UARTS. On your host pick the first + enumeration. + + The details of the setting of the serial gpmc setup are not available. + The values were provided by another party. + + The serial port set up is the same with Zoom1. + Baud rate 115200, 8 bit data, no parity, 1 stop bit, no flow. + + The kernel bootargs are + console=ttyS3,115200n8 + + Signed-off-by: Tom Rix + +commit 3ea201b016ab259a5ac8824af767569522768c47 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun May 31 12:44:27 2009 +0200 + + lh7a40x: move serial driver to drivers/serial + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 379be585eb2343d8814a5cee5fb3da930d846bee +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat May 16 22:48:46 2009 +0200 + + pxa: move serial driver to drivers/serial + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit ad7e8aac6920f8b8a85b3cc2e93bca7458e99aa1 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat May 9 13:21:19 2009 +0200 + + arm: remove cpu_init + + move s3c44b0 to arch_cpu_init and as noone use cpu_init remove it + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit c358d9c3f16571e8f825e81b75eaf32e228cb669 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat May 9 13:21:18 2009 +0200 + + arm: unify interrupt init + + all arm init the IRQ stack the same way + so unify it in lib_arm/interrupts.c and then call arch specific interrupt init + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 10a451cd57cffbca875c97bbd8929059c5627ec6 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri May 8 20:24:12 2009 +0200 + + arm: unify linker script + + all arm boards except a few use the same cpu linker script + so move it to cpu/$(CPU) + + that could be overwrite in following order + SOC + BOARD + via the corresponding config.mk + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 9475c63c7855edd863c93a9bb0f4b8e240d9d212 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat May 16 10:02:05 2009 +0200 + + afeb9260: fix macb device init + + uses PA10, PA11 for ETX2 and ETX3. + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 1bbae2b816d4ed38db2ebf42166a973b1ffc0df7 +Author: Stefan Roese +Date: Wed May 27 10:34:32 2009 +0200 + + ppc4xx: Remove PCI async bootup message if PCI is not used + + Signed-off-by: Stefan Roese + +commit a3455c00510c5abf1e91743c4a02d8393b6df18d +Author: Wolfgang Denk +Date: Fri May 15 09:19:52 2009 +0200 + + TQM834x: use buffered writes to accelerate writing to flash + + Also enable display of 'E'mpty sectors in "flinfo" output. + + Signed-off-by: Wolfgang Denk + Signed-off-by: Kim Phillips + +commit 4681e673a51c48f4c096aa3c8fae5e6217ffd58d +Author: Wolfgang Denk +Date: Thu May 14 23:18:34 2009 +0200 + + TQM834x: add FDT support + + Signed-off-by: Wolfgang Denk + Signed-off-by: Kim Phillips + +commit 929b79a0b5e48303ab04aae9d0abceb0c707f111 +Author: Wolfgang Denk +Date: Thu May 14 23:18:33 2009 +0200 + + TQM834x: fix environment size; add redundant env. + + Also reserve more space for U-Boot as it will probably grow soon. + + Signed-off-by: Wolfgang Denk + Signed-off-by: Kim Phillips + +commit 2ae0f35fd60c7345446835b95a4daff356e1f031 +Author: Thomas Lange +Date: Sun May 3 20:07:33 2009 +0200 + + ARM DaVinci: Reset with watchdog enabled + + Once the Davinci watchdog has been enabled, the timeout + value cannot be changed. If the timeout in use is long, + it can take a long time for card to reset. By writing + an invalid service key, we can trigger an immediate reset. + + Signed-off-by: Thomas Lange + +commit 6cc7ba9ed43106946aa9aa868302aa2faf1d17be +Author: Wolfgang Denk +Date: Fri May 15 10:07:43 2009 +0200 + + video: Add an option to skip video initialization + + This patch adds an option to skip the video initialization on for all + video drivers. This is needed for the CPCI750 which can be built as + CPCI host and adapter/target board. And the adapter board can't + access the video cards located on the CompactPCI bus. + + Signed-off-by: Stefan Roese + Cc: Anatolij Gustschin + + Rebased against simplifying patch. + Signed-off-by: Wolfgang Denk + +commit f62f64692ff7f6226ad221d5df6487ea5ef39bdd +Author: Wolfgang Denk +Date: Fri May 15 10:07:42 2009 +0200 + + drv_video_init(): simplify logic + + Simplify nesting of drv_video_init() and use a consistent way of + indicating failure / success. Before, it took me some time to realize + which of the returns was due to an error condition and which of them + indicated success. + + Signed-off-by: Wolfgang Denk + Cc: Anatolij Gustschin + +commit 1699da6297b8c22da16cf85b3c79192f1a6d70ca +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Wed May 13 21:01:13 2009 +0200 + + at91: regroup IP hw init in one file per soc + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 28b00324becf3552134ae1e086509dc9c3d6e932 +Author: David Brownell +Date: Fri May 15 23:48:37 2009 +0200 + + dm355 evm support + + Initial U-Boot support for the DaVinci DM355 EVM. This is a board + from Spectrum Digital. Board docs include schematic and firmware + for its microcontroller: + + http://c6000.spectrumdigital.com/evmdm355/revd/ + + Most of the DM355 chip is fully documented by TI, the most notable + exception being the MPEG/JPEG coprocessor (programmable using codecs + available at no cost from TI), which is omitted from its DM335 sibling: + + http://focus.ti.com/docs/prod/folders/print/tms320dm355.html + + This version can boot from the on-board DM9000 Ethernet chip, after + being loaded (from NAND, MMC/SD, or UART). In the near future, NAND + and USB support could be added ... NAND support is being held back + until the support for the 4-bit ECC hardware is ready. + + Signed-off-by: David Brownell + +commit 136cf92dc9e84c9a1bf567f1fe741092bf765495 +Author: Sanjeev Premi +Date: Fri May 15 23:48:37 2009 +0200 + + OMAP3EVM: Set default bootfile + + The current configuration doesn't define default + bootfile; leading to this warning at execution: + + OMAP3_EVM # dhcp + ... + ... + DHCP client bound to address 192.168.1.11 + *** Warning: no boot file name; using 'AC18BE16.img' + TFTP from server 0.0.0.0; our IP address is 192.168.1.11; + sending through gateway 192.168.1.1 + Filename 'AC18BE16.img'. + Load address: 0x82000000 + Loading: * + TFTP error: 'File not found' (1) + + Signed-off-by: Sanjeev Premi + +commit 1a09d05abfc6d4d4f1fce9f6bd0275bd1c08d4f5 +Author: s-paulraj@ti.com +Date: Fri May 15 23:48:36 2009 +0200 + + ARM DaVinci: Minor Updates to base addresses + + Patch adds base addresses for DaVinci DM365. Updated patches for DM365 + will be posted soon. + + Signed-off-by: Sandeep Paulraj + +commit de193e8e369f5f029ed3b6e2fc60341098eea766 +Author: Tom Rix +Date: Fri May 15 23:48:36 2009 +0200 + + ZOOM2 Add support for debug board detection. + + The logicpd web site is a good source for general information on this board. + Please start looking here if the below links are broken. + http://www.logicpd.com + + This is a pdf of the product + http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf + + This is a pdf of the product quick start guide. + The debug board is described here. + http://support.logicpd.com/downloads/1165/ + + This is a wiki showing the debug board in use + https://omapzoom.org/gf/project/omapzoom/wiki/?pagename=GettingStartedWithZoomII_AKA_OMAP34XII_MDP + + The zoom2 has an auxillary board that contains the serial, net, jtag and + battery simulator. This change supports a runtime check if the debug board is + connected. + + Signed-off-by: Tom Rix + +commit 0c872ecd01d6782ae9d37b6eb721404a4a48f356 +Author: Tom Rix +Date: Fri May 15 23:48:36 2009 +0200 + + OMAP3 Port kernel omap gpio interface. + + Port version 2.6.27 of the linux kernel's omap gpio interface to u-boot. + The orignal source is in linux/arch/arm/plat-omap/gpio.c + + See doc/README.omap3 for instructions on use. + + Signed-off-by: Tom Rix + +commit 376aee78dd66ae0dc4ce496cbe93ecc80aaad48e +Author: Tom Rix +Date: Fri May 15 23:48:36 2009 +0200 + + ZOOM2 Add initial support for Zoom2 + + Zoom2 is a new board from Texas Instruments and LogicPD + + The logicpd web site is a good source for general information on this board. + Please start looking here if the below links are broken. + http://www.logicpd.com + + This is a pdf of the product + http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf + This is the product description web page + http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap34x-ii-mdp + + This patch provides a zoom2 base target by copying zoom1 and by making some + obvious changes. + + To configure, run + make omap3_zoom2_config + + Signed-off-by: Tom Rix + +commit 53925acf1b5c1a1e6230cda2697640cd05bd1104 +Author: Sandeep Paulraj +Date: Fri May 15 23:48:33 2009 +0200 + + ARM DaVinci:Consolidate common u-boot.lds + + The u-boot.lds is common for all DaVinci boards. The patch removes + multiple instances and moves the u-boot.lds to /cpu/arm926ejs/davinci + folder. This addresses one of the comments i received while submitting + patches for DM3xx + + Signed-off-by: Sandeep Paulraj + +commit 68a531fd465f5c0b3d373e0010afed32e88d37c4 +Author: Tom Rix +Date: Fri May 15 23:47:52 2009 +0200 + + OMAP Consolidate common u-boot.lds to cpu layer. + + The u-boot.lds file is common for all omap boards. + Move a cleaned up version to the cpu layer and add makefile logic to use it. + + Signed-off-by: Tom Rix + +commit 65a76d4f947a193e57bb8f8093c481f27e059f8f +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri May 15 23:47:14 2009 +0200 + + arm/dcc: add xscale support + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 66e8f9da6879fe37f3159b3997bff874842dc51d +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri May 15 23:47:14 2009 +0200 + + arm/dcc: use static support to allow to use it at anytime + + the dcc can be used at the start of the cpu + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 7893aa1eb6f52c3957efc301b436f1fa11e91a00 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri May 15 23:47:13 2009 +0200 + + ARM: Update mach-types + + update against linux v2.6.29 + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 2907798926ee932f453ac8538e7a6c05c18428a5 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri May 15 23:47:13 2009 +0200 + + arm920/926/926: remove non needed header + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 269dfea017b09c5a999d3053d00505c19789c350 +Author: David Brownell +Date: Fri May 15 23:47:13 2009 +0200 + + davinci dm6446evm NAND update + + This updates the optional (non-default!) NAND support for the + DaVinci DM6446 EVM: + + - include MTD partitioning, defaulting to what Linux uses + + - use a flash-based BBT, which among other things speeds bootup + + This matches code that's now queued for mainline Linux, and might + even merge in an upcoming 2.6.30-rc; and the MTIDS are set up so + that the U-Boot $mtdparts environment variable can be passed as-is + on the kernel command line as a cmdlinepart override. + + Signed-off-by: David Brownell + +commit 7a4f511b59f08f51dde4ceacbd45f49b8bf2a5cc +Author: David Brownell +Date: Fri May 15 23:47:12 2009 +0200 + + davinci: display correct clock info + + Move the clock-rate dumping code into the cpu/.../davinci area + where it should have been, enabled by CONFIG_DISPLAY_CPUINFO, + updating the format and showing the DSP clock (where relevant). + + Switch boards to use the cpuinfo() hook for this stuff. + + Remove a few now-obsolete PLL #defines. + + Signed-off-by: David Brownell + +commit daea928829098cae3c9ec6b801e52ba616725034 +Author: Tom Rix +Date: Fri May 15 23:47:12 2009 +0200 + + ZOOM1 Remove more legacy NAND defines. + + These legacy NAND defines are no longer needed by this target. + + Signed-off-by: Tom Rix + +commit 65fd21c80fcaca2bbfe3ab06ab6ac68207408078 +Author: Tom Rix +Date: Fri May 15 23:47:12 2009 +0200 + + LED Add documentation describing the status_led and colour led API. + + This document describes the u-boot status LED API. + This allows common u-boot commands to use a board's leds to + provide status for activities like booting and downloading files. + + Signed-off-by: Tom Rix + +commit 7cdf804f34378b910b4c4edd2dac7e3ca61c0825 +Author: Tom Rix +Date: Fri May 15 23:47:12 2009 +0200 - Revert "SMC911x driver fixed for NFS boot" + ARM Add blue colour LED to status_led. - This reverts commit ca9c8a1e10fac01e6a1129f82a7ce18bd818fa43, - which causes compile warnings ("large integer implicitly truncated - to unsigned type") on all systems that use this driver. The warning - results from passing long constants (TX_CFG, RX_CFG) into - smc911x_set_mac_csr() which is declared to accept "unsigned - character" arguments only. + There is exiting support for red,yellow,green but no blue. + The main LED on the zoom2 is a blue LED. - Being close to a release, with nobody available to actually test the - code or the suggested fixes, it seems better to revert the patch. + Signed-off-by: Tom Rix + +commit b54384e3ba6b5535751f317fcd3940a53eed0d3a +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri May 15 23:47:02 2009 +0200 + + arm: timer and interrupt init rework + + actually the timer init use the interrupt_init as init callback + which make the interrupt and timer implementation difficult to follow + + so now rename it as int timer_init(void) and use interrupt_init for interrupt + + btw also remane the corresponding file to the functionnality implemented + + as ixp arch implement two timer - one based on interrupt - so all the timer + related code is moved to timer.c + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 5b4bebe1d20c4f2b70d48b06aed1016785efcc25 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri May 15 23:45:22 2009 +0200 + + OMAP3: Reorganize Makefile style + + Reformat COBJS handling. + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Dirk Behme + +commit b1966982718347f67317b3fb356439743ca68a37 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri May 15 23:45:22 2009 +0200 + + OMAP3: Remove dublicated interrupt code + + Remove duplicated interrupt code. Original, identical code can be found + in lib_arm/interrupts.c + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Dirk Behme + +commit ac7260a4190315eba4a6e526c764f6cad0bbf8c5 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri May 15 23:45:22 2009 +0200 + + at91rm9200: move reset code to reset.c + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 2c75c78d94574ee996db2aa9b511258519471dd6 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri May 15 23:45:22 2009 +0200 + + ixp/interrupts: Move conditional compilation to Makefile + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 8fc3bb4b0603516ad641e2de252a400b85fd869b +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri May 15 23:45:20 2009 +0200 + + arm: cleanup remaining CONFIG_INIT_CRITICAL + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit c20e28f49aaf38c7dede46d8f8fe8234fe90822c +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri May 15 23:45:12 2009 +0200 + + arm946es: remove non used timer + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit f1d944e30eb8ff89080fa03fb98d8fb5c82388d2 +Author: David Brownell +Date: Fri May 15 23:44:09 2009 +0200 + + davinci: add basic dm355/dm350/dm335 support + + Add some basic declarations for DaVinci DM355/DM350/DM335 support, + keyed on CONFIG_SOC_DM355. (DM35X isn't quite right because the + DM357 is very different; while the DM355 is like a DM355 without + the MPEG/JPEG coprocessor). + + These have different peripherals than the DM6446, and some of + the peripherals are at different addresses. Notably for U-Boot, + there's no EMAC, and the NAND controller address is different + + Signed-off-by: David Brownell + +commit bd36fdc146654f9de4e2ad346126e6bd2990fb19 +Author: David Brownell +Date: Fri May 15 23:44:09 2009 +0200 + + davinci: fix dm644x buglets + + Fix two buglets in the dm644x support: don't set two must-be-zero + bits in the UART management register; and only include the I2C hooks + if the I2C driver is being included. + + Signed-off-by: David Brownell + +commit f79043681ff44bae435c06f830e51e1546db7e19 +Author: David Brownell +Date: Fri May 15 23:44:08 2009 +0200 + + davinci: split out some dm644x-specific bits from psc + + Split out DaVinci DM6446-specific bits from more generic bits: + + - Add a CONFIG_SOC_DM644X. All current boards use DM6446 chips; + DM6443 and DM6441 chips differ in available peripherals. + + - Move most DM644X-specific bits from psc.c to a new dm644x.c file, + which is conditionally built. It provides device-specific setup. + + Plus minor coding style and comment updates with respect to the PSC. + + Signed-off-by: David Brownell + +commit 48ef5729555f41f51618b6a3016ac5c53c7c75dc +Author: David Brownell +Date: Fri May 15 23:44:08 2009 +0200 + + davinci: cpu-specific build uses conditional make syntax + + Update cpu/arm926ejs/davinci/Makefile to use COBJ-y type syntax. + Add the first conditional: for EMAC driver support. Not all + chips have an EMAC; and boards might not use it, anyway. + + This doesn't touch PHY configuration; that should eventually + become conditional too. + + Signed-off-by: David Brownell + +commit 7b7808ae6dace59287f565e9323cda7b098a5612 +Author: David Brownell +Date: Fri May 15 23:44:06 2009 +0200 + + davinci: move psc support board-->cpu + + Move DaVinci PSC support from board/* to cpu/* where it belongs. + The PSC module manages clocks and resets for all DaVinci-family + SoCs, and isn't at all board-specific. + + Signed-off-by: David Brownell + +commit 84f7411cb901b8df2391cf7e967ad0737f6194aa +Author: David Brownell +Date: Tue Apr 14 08:52:58 2009 -0700 + + DaVinci now respects SKIP_LOWLEVEL_INIT + + Don't needlessly include lowlevel init code; that's only really + needed with boot-from NOR (not boot-from-NAND). The 2nd stage + loader (UBL) handles that before it loads U-Boot. + + Signed-off-by: David Brownell + +commit 641e0925e4bf7adf8e2e04e3ad81b840fd71cadd +Author: David Brownell +Date: Sun Apr 12 22:49:26 2009 -0700 + + DaVinci Ethernet cleanup + + Chips without the EMAC controller won't need the utilities + it uses to read an Ethernet address from EEPROM; so don't + include them needlessly. + + Use is_valid_ether() to validate the address from EEPROM. + All-zero addresses aren't the only invalid addresses. + A fully erased EEPROM returns all-ones, also invalid... + + Switch those Ethernet utilities to use "%pM" for printing + MAC addresses; and not say ROM when they mean EEPROM. + + Signed-off-by: David Brownell + Acked-by: Ben Warren + +commit c790b04d230363d03939dc008bcc80f3ba4de1ae +Author: Stefan Roese +Date: Mon May 11 15:50:12 2009 +0200 + + lib_arch/board.c: Move malloc initialization before flash_init() + + This patch moves the malloc initialization before calling flash_init(). + Upcoming changes to the NOR FLASH common CFI driver with optional + MTD infrastructure and MTD concatenation support will call malloc(). + And nothing really speaks against enabling malloc just a little earlier + in the boot stage. Some architectures already enable malloc before + calling flash_init() so they don't need any changes here. + + Signed-off-by: Stefan Roese + Cc: Wolfgang Denk + Cc: Mike Frysinger + Cc: Scott McNutt + Cc: Shinya Kuribayashi + Cc: Nobuhiro Iwamatsu + Cc: Daniel Hellstrom + Cc: Jean-Christophe PLAGNIOL-VILLARD + Cc: John Rigby + +commit d873133f2ba9bd613d5f6552c31cc70fb13f15d3 +Author: Stefan Roese +Date: Mon May 11 13:46:14 2009 +0200 + + ppc4xx: Add Sequoia RAM-booting target + + This patch adds another build target for the AMCC Sequoia PPC440EPx + eval board. This RAM-booting version is targeted for boards without + NOR FLASH (NAND booting) which need a possibility to initially + program their NAND FLASH. Using a JTAG debugger (e.g. BDI2000/3000) + configured to setup the SDRAM, this debugger can load this RAM- + booting image to the target address in SDRAM (in this case 0x1000000) + and start it there. Then U-Boot's standard NAND commands can be + used to program the NAND FLASH (e.g. "nand write ..."). + + Here the commands to load and start this image from the BDI2000: + + 440EPX>reset halt + 440EPX>load 0x1000000 /tftpboot/sequoia/u-boot.bin + 440EPX>go 0x1000000 + + Please note that this image automatically scans for an already + initialized SDRAM TLB (detected by EPN=0). This TLB will not be + cleared. This TLB doesn't need to be TLB #0, this RAM-booting + version will detect it and preserve it. So booting via BDI2000 + will work and booting with a complete different TLB init via + U-Boot works as well. + + Signed-off-by: Stefan Roese + +commit 837db3d87f4bfe9261629fb4a1bb433506a3056a +Author: Mike Frysinger +Date: Wed May 6 08:41:45 2009 -0400 + + tools/envcrc: add --binary option to export embedded env + + The --binary option to envcrc can be used to export the embedded env as a + binary blob so that it can be manipulated/examined/whatever externally. + + Signed-off-by: Mike Frysinger + +commit 18cc7afd9a153a66854af862d14ba01c5496cf07 +Author: Ben Warren +Date: Tue Apr 28 16:50:53 2009 -0700 + + Enable CONFIG_NET_MULTI on all remaining PPC4xx boards + + All in-tree PPC4xx boards now use CONFIG_NET_MULTI + + Signed-off-by: Ben Warren + Signed-off-by: Stefan Roese + +commit 70be6c2d40076f14062b892152649f9a62832fc9 +Author: Matthias Fuchs +Date: Wed Apr 29 09:51:01 2009 +0200 + + 4xx: Add support for DP405 hardware variants + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit de47a34d4de1d007a8951efd072283516d580ffa +Author: Matthias Fuchs +Date: Wed Apr 29 09:51:00 2009 +0200 + + 4xx: Remove binary cpld bitstream from DP405 board + + This patch removes the cpld binary bitstream that is + used by esd's cpld command on DP405 boards. + + Because u-boot with an external cpld bitstream may not + take more space in flash than before the u-boot binary is + shrinked a little bit. Some unused featues have been + removed therefore. + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit 700d553fd3afe804086de8f73d95153315eb0c32 +Author: Matthias Fuchs +Date: Wed Apr 29 09:50:59 2009 +0200 + + 4xx: Remove binary cpld bitstream from VOM405 board + + This patch removes the cpld binary bitstream that is + used by esd's cpld command on VOM405 boards. + + Because u-boot with an external cpld bitstream may not + take more space in flash than before the u-boot binary is + shrinked a little bit. + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit 0bb10630364c48d9857cbf5353da609fc4dd6751 +Author: Matthias Fuchs +Date: Wed Apr 29 09:50:58 2009 +0200 + + 4xx: Remove binary cpld bitstream from PMC405 board + + This patch removes the cpld binary bitstream that is + used by esd's cpld command on PMC405 boards. + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit 7cc635fb35f5b94e304fa2243d56758f57f6416b +Author: Matthias Fuchs +Date: Wed Apr 29 09:50:57 2009 +0200 + + 4xx: Remove binary cpld bitstream from CMS700 board + + This patch removes the cpld binary bitstream that is + used by esd's cpld command on CMS700 boards. + + Because u-boot with an external cpld bitstream may not + take more space in flash than before the u-boot binary is + shrinked a little bit. Some unused featues have been + removed therefore. + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit c1b2f79788deec75773b1d944d8aaf4a6d5baf9e +Author: Matthias Fuchs +Date: Wed Apr 29 09:50:56 2009 +0200 + + esd/common: extend cpld command with address parameter + + This patch adds support for an address parameter to esd's + cpld command. This is in preparation to remove compiled-in + binary cpld (xsvf) bitstreams. + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit 9166b776350d16460c7330bfb0a50154ea0a1903 +Author: Peter Tyser +Date: Sat Apr 18 22:34:06 2009 -0500 + + cmd_i2c: Fix i2c help command output when CONFIG_I2C_MUX + + When CONFIG_I2C_MUX was defined the output of 'help i2c' was not + correct, eg: + + => help i2c + i2c bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes. + speed [speed] - show or set I2C bus speed + i2c dev [dev] - show or set current I2C bus + ... + + It has been changed to: + i2c speed [speed] - show or set I2C bus speed + i2c bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes + i2c dev [dev] - show or set current I2C bus + ... + + Signed-off-by: Peter Tyser + +commit 0a45a6357b02e5ce5bf899a60db09def6a129fee +Author: Peter Tyser +Date: Sat Apr 18 22:34:05 2009 -0500 + + cmd_i2c: Clean up trivial helper functions + + Signed-off-by: Peter Tyser + +commit e96ad5d3aba42f8ffe99f7cc5ec1bb9f21810035 +Author: Peter Tyser +Date: Sat Apr 18 22:34:04 2009 -0500 + + cmd_i2c: Clean up i2c command argument parsing + + argc and argv should only be modified once instead of once for + every i2c sub-command + + Signed-off-by: Peter Tyser + +commit 0f89c54be92773b23d66ac401ba6acb6144100c3 +Author: Peter Tyser +Date: Sat Apr 18 22:34:03 2009 -0500 + + i2c: Update references to individual i2c commands + + The individual i2c commands imd, imm, inm, imw, icrc32, iprobe, iloop, + and isdram are no longer available so all references to them have been + updated to the new form of "i2c ". + + Signed-off-by: Peter Tyser + +commit d48eb5131d287f52bb85b4c58c8680a2e8e3b641 +Author: Peter Tyser +Date: Sat Apr 18 22:34:02 2009 -0500 + + i2c: Remove deprecated individual i2c commands + + The following individual I2C commands have been removed: imd, imm, inm, + imw, icrc32, iprobe, iloop, isdram. + + The functionality of the individual commands is still available via + the 'i2c' command. + + This change only has an impact on those boards which did not have + CONFIG_I2C_CMD_TREE defined. + + Signed-off-by: Peter Tyser + +commit 655b34a78adf60ef260981688837904208883ae9 +Author: Peter Tyser +Date: Sat Apr 18 22:34:01 2009 -0500 + + i2c: Create common default i2c_[set|get]_bus_speed() functions + + New default, weak i2c_get_bus_speed() and i2c_set_bus_speed() functions + replace a number of architecture-specific implementations. + + Also, providing default functions will allow all boards to enable + CONFIG_I2C_CMD_TREE. This was previously not possible since the + tree-form of the i2c command provides the ability to display and modify + the i2c bus speed which requires i2c_[set|get]_bus_speed() to be + present. + + Signed-off-by: Peter Tyser + +commit 8229e9c04f7019ddd76aea05d4dca044cbc9a34a +Author: Peter Tyser +Date: Sat Apr 18 22:34:00 2009 -0500 + + cm5200: Make function test command names more unique + + Add "_test" to cm5200's function test command names to prevent + overlap with common, global function names. Originally, the + "do_i2c" function test command interfered with + common/cmd_i2c.c's "do_i2c" when CONFIG_I2C_CMD_TREE was defined. + + The functions were also made static as they are not globally accessed. + + Signed-off-by: Peter Tyser + +commit f0722ee762e8dada9d7f74ac2745e043f83aae85 +Author: Peter Tyser +Date: Fri Apr 24 15:34:09 2009 -0500 + + tsi108_i2c: Add i2c_init() stub function + + Add the i2c_init() function so that the tsi108_i2c.c driver fits + U-Boot's standard I2C API which is utilized by cmd_i2c.c + + Signed-off-by: Peter Tyser + +commit 8d907e79bc9babb27396e34be54cfdc36ff62fb9 +Author: Peter Tyser +Date: Fri Apr 24 15:34:08 2009 -0500 + + mpc7448hpc2: Add CONFIG_SYS_I2C_SPEED define + + Add standard CONFIG_SYS_I2C_SPEED define for the mpc7448hpc2 so that + it can use the common 'i2c speed' command. Note that the I2C controller + utilized by the mpc7448hpc2 has a fixed speed and cannot be changed + dynamically. + + Signed-off-by: Peter Tyser + +commit a056b1ce9e19b4d4ab3dd01c3f897dcd832cd37f +Author: Peter Tyser +Date: Fri Apr 24 15:34:07 2009 -0500 + + Marvell: i2c cleanup + + The following changes were made, primarily to bring the Marvell i2c + driver in line with U-Boot's current I2C API: + - Made i2c_init() globally accessible + - Made i2c_read() and i2c_write() return an integer + - Updated i2c_init() calls to pass in CONFIG_SYS_I2C_SLAVE in the + offhand chance someone adds slave support in the future + + Signed-off-by: Peter Tyser + +commit 54afc6ee10c8cd09598d814d49e601359b005e49 +Author: Peter Tyser +Date: Fri Apr 24 15:34:06 2009 -0500 + + cpci750: i2c cleanup + + The following changes were made, primarily to bring the cpci750 i2c + driver in line with U-Boot's current I2C API: + - Made i2c_init() globally accessible + - Made i2c_read() and i2c_write() return an integer + - Updated i2c_init() calls to pass in CONFIG_SYS_I2C_SLAVE in the + offhand chance someone adds slave support in the future + + Signed-off-by: Peter Tyser + +commit 9c90a2c8e87414007a016b7cd099ac1e32fd301b +Author: Peter Tyser +Date: Fri Apr 24 15:34:05 2009 -0500 + + i2c.h: Provide a default CONFIG_SYS_I2C_SLAVE value + + Many boards/controllers/drivers don't support an I2C slave interface, + however CONFIG_SYS_I2C_SLAVE is used in common code so provide a + default + + Signed-off-by: Peter Tyser commit e7563aff174f77aa61dab1ef5d9b47bebaa43702 Author: Kumar Gala diff --git a/board/digsy_mtc/cmd_mtc.c b/board/digsy_mtc/cmd_mtc.c index 9e377cd30d..2ecb4f8c39 100644 --- a/board/digsy_mtc/cmd_mtc.c +++ b/board/digsy_mtc/cmd_mtc.c @@ -333,18 +333,18 @@ int cmd_mtc(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(mtc, 5, 1, cmd_mtc, - "mtc - special commands for digsyMTC\n", - "[subcommand] [args...]\n" - "Subcommands list:\n" - "led [ledname] [state] [blink] - set state of leds\n" - " [ledname]: diag can1 can2 can3 can4 usbpwr usbbusy user1 user2\n" - " [state]: off red green orange\n" - " [blink]: blink interval in 100ms steps (1 - 10; 0 = static)\n" - "key - returns state of user key\n" - "version - returns firmware version of supervisor uC\n" - "appreg - reads appreg value and stores in environment variable" - " 'appreg'\n" - "digin [channel] - returns state of digital input (1 or 2)\n" - "digout - sets state of two digital outputs\n" - "help [subcommand] - get help for subcommand\n"); - + "mtc - special commands for digsyMTC\n", + "[subcommand] [args...]\n" + "Subcommands list:\n" + "led [ledname] [state] [blink] - set state of leds\n" + " [ledname]: diag can1 can2 can3 can4 usbpwr usbbusy user1 user2\n" + " [state]: off red green orange\n" + " [blink]: blink interval in 100ms steps (1 - 10; 0 = static)\n" + "key - returns state of user key\n" + "version - returns firmware version of supervisor uC\n" + "appreg - reads appreg value and stores in environment variable" + " 'appreg'\n" + "digin [channel] - returns state of digital input (1 or 2)\n" + "digout - sets state of two digital outputs\n" + "help [subcommand] - get help for subcommand\n" +); diff --git a/board/esd/dp405/dp405.c b/board/esd/dp405/dp405.c index 8f4b78d404..e52d37bc21 100644 --- a/board/esd/dp405/dp405.c +++ b/board/esd/dp405/dp405.c @@ -101,28 +101,28 @@ int checkboard (void) id1 = trans[(~(in_be32((void *)GPIO0_IR) >> 5)) & 0x0000000f]; id2 = trans[(~(in_be32((void *)GPIO0_IR) >> 9)) & 0x0000000f]; - rev = in_8((void *)0xf0001000); - if (rev & 0x10) /* old DP405 compatibility */ - rev = in_8((void *)0xf0000800); - - switch (rev & 0xc0) { - case 0x00: - puts(" (HW=DP405"); - break; - case 0x80: - puts(" (HW=DP405/CO"); - break; - case 0xc0: - puts(" (HW=DN405"); - break; - } - printf(", ID=0x%1X%1X, PLD=0x%02X", id2, id1, rev & 0x0f); - - if ((rev & 0xc0) == 0xc0) { - printf(", C5V=%s", - in_be32((void *)GPIO0_IR) & 0x40000000 ? "off" : "on"); - } - puts(")\n"); + rev = in_8((void *)0xf0001000); + if (rev & 0x10) /* old DP405 compatibility */ + rev = in_8((void *)0xf0000800); + + switch (rev & 0xc0) { + case 0x00: + puts(" (HW=DP405"); + break; + case 0x80: + puts(" (HW=DP405/CO"); + break; + case 0xc0: + puts(" (HW=DN405"); + break; + } + printf(", ID=0x%1X%1X, PLD=0x%02X", id2, id1, rev & 0x0f); + + if ((rev & 0xc0) == 0xc0) { + printf(", C5V=%s", + in_be32((void *)GPIO0_IR) & 0x40000000 ? "off" : "on"); + } + puts(")\n"); return 0; } diff --git a/cpu/arm926ejs/mx27/generic.c b/cpu/arm926ejs/mx27/generic.c index eab54d86df..bcf7899baa 100644 --- a/cpu/arm926ejs/mx27/generic.c +++ b/cpu/arm926ejs/mx27/generic.c @@ -238,4 +238,3 @@ void imx_gpio_mode(int gpio_mode) ®s->port[port].iconfb2); } } - diff --git a/cpu/arm926ejs/mx27/timer.c b/cpu/arm926ejs/mx27/timer.c index d22252e131..90110581ef 100644 --- a/cpu/arm926ejs/mx27/timer.c +++ b/cpu/arm926ejs/mx27/timer.c @@ -176,7 +176,7 @@ void set_timer (ulong t) timestamp = time_to_tick(t); } -/* delay x useconds AND perserve advance timstamp value */ +/* delay x useconds AND preserve advance timstamp value */ void udelay (unsigned long usec) { unsigned long long tmp; @@ -188,4 +188,3 @@ void udelay (unsigned long usec) while (get_ticks() < tmp) /* loop till event */ /*NOP*/; } - diff --git a/cpu/arm_cortexa8/cpu.c b/cpu/arm_cortexa8/cpu.c index fcb5775a1c..822ee7d97e 100644 --- a/cpu/arm_cortexa8/cpu.c +++ b/cpu/arm_cortexa8/cpu.c @@ -78,4 +78,3 @@ static void cache_flush(void) { asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (0)); } - diff --git a/cpu/arm_cortexa8/omap3/cache.c b/cpu/arm_cortexa8/omap3/cache.c index f49ed4afd8..0d5b444be1 100644 --- a/cpu/arm_cortexa8/omap3/cache.c +++ b/cpu/arm_cortexa8/omap3/cache.c @@ -93,4 +93,3 @@ void l2_cache_disable(void) __asm__ __volatile__("mov r12, %0":"=r"(j)); } } - diff --git a/doc/README.LED b/doc/README.LED index 12211774e5..94e552aa03 100644 --- a/doc/README.LED +++ b/doc/README.LED @@ -10,7 +10,7 @@ The first step is to define CONFIG_STATUS_LED in the board config file. If the LED support is only for a single board, define CONFIG_BOARD_SPECIFIC_LED in the board config file. -At a minimum, these macros must be defined at +At a minimum, these macros must be defined at STATUS_LED_BIT STATUS_LED_STATE STATUS_LED_PERIOD @@ -20,7 +20,7 @@ STATUS_LED_BIT STATUS_LED_STATE STATUS_LED_PERIOD -Where can a integer 1 through 3. +Where can a integer 1 through 3. STATUS_LED_BIT is passed into the __led_* functions to identify which LED is being acted on. As such, the value choose must be unique with with respect to @@ -37,25 +37,25 @@ range from 2 to 10. Some other LED macros STATUS_LED_BOOT is the LED to light when the board is booting. This must be a -valid STATUS_LED_BIT value. +valid STATUS_LED_BIT value. STATUS_LED_RED is the red LED. It is used signal errors. This must be a valid STATUS_LED_BIT value. Other similar color LED's are STATUS_LED_YELLOW and -STATUS_LED_BLUE. +STATUS_LED_BLUE. These board must define these functions __led_init is called once to initialize the LED to STATUS_LED_STATE. One time start up code should be placed here. -__led_set is called to change the state of the LED. +__led_set is called to change the state of the LED. __led_toggle is called to toggle the current state of the LED. Colour LED ======================================== -Colour LED's are at present only used by ARM. +Colour LED's are at present only used by ARM. The functions names explain their purpose. diff --git a/doc/README.omap3 b/doc/README.omap3 index 66e781d0f8..6227151f8e 100644 --- a/doc/README.omap3 +++ b/doc/README.omap3 @@ -156,4 +156,3 @@ http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pd [8] TI OMAP3 U-Boot: http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gz - diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c index 3686575a0e..d48d22b612 100644 --- a/drivers/qe/uec.c +++ b/drivers/qe/uec.c @@ -1393,5 +1393,3 @@ int uec_standard_init(bd_t *bis) { return uec_eth_init(bis, uec_info, ARRAY_SIZE(uec_info)); } - - diff --git a/include/asm-arm/arch-mx27/imx-regs.h b/include/asm-arm/arch-mx27/imx-regs.h index 5d2e0b3636..cff2b0e919 100644 --- a/include/asm-arm/arch-mx27/imx-regs.h +++ b/include/asm-arm/arch-mx27/imx-regs.h @@ -1,5 +1,4 @@ /* - * * (c) 2007 Pengutronix, Sascha Hauer * (c) 2009 Ilya Yanok, Emcraft Systems * @@ -506,4 +505,3 @@ struct iim_regs { #define IIM1_SUID 1 #endif /* _IMX_REGS_H */ - diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index fddcce5e4f..93068600ad 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -110,7 +110,9 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy); #define CONFIG_FSL_DDR3 1 #undef CONFIG_FSL_DDR_INTERACTIVE -// #define CONFIG_DDR_ECC /* ECC will be enabled based on perf_mode environment variable */ +/* ECC will be enabled based on perf_mode environment variable */ +/* #define CONFIG_DDR_ECC */ + #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER #define CONFIG_MEM_INIT_VALUE 0xDeadBeef @@ -126,7 +128,6 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy); #define SPD_EEPROM_ADDRESS1 0x51 /* CTLR 0 DIMM 0 */ /* These are used when DDR doesn't use SPD. */ -//#define CONFIG_SYS_SDRAM_SIZE 512 /* DDR is 512MB */ #define CONFIG_SYS_SDRAM_SIZE 1024 /* DDR is 1GB */ /* Default settings for "stable" mode */ diff --git a/include/linux/mtd/concat.h b/include/linux/mtd/concat.h index e80c674dae..c92b4ddc9b 100644 --- a/include/linux/mtd/concat.h +++ b/include/linux/mtd/concat.h @@ -9,7 +9,6 @@ #ifndef MTD_CONCAT_H #define MTD_CONCAT_H - struct mtd_info *mtd_concat_create( struct mtd_info *subdev[], /* subdevices to concatenate */ int num_devs, /* number of subdevices */ @@ -18,4 +17,3 @@ struct mtd_info *mtd_concat_create( void mtd_concat_destroy(struct mtd_info *mtd); #endif - diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index c884567b96..16556c4798 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -113,9 +113,9 @@ struct mtd_oob_ops { struct mtd_info { u_char type; u_int32_t flags; - uint64_t size; // Total size of the MTD + uint64_t size; /* Total size of the MTD */ - /* "Major" erase size for the device. Naïve users may take this + /* "Major" erase size for the device. Naïve users may take this * to be the only erase size available, or may use the more detailed * information below if they desire */ -- 2.39.5