From 8ed9604613398660f9ee855060661da8809d4045 Mon Sep 17 00:00:00 2001 From: wdenk Date: Sun, 9 Jan 2005 23:16:25 +0000 Subject: [PATCH] * Patches by Richard Woodruff, 01 Oct 2004: add support for the TI OMAP2420 processor and its H4 reference board * Patch by Christian Pellegrin, 24 Sep 2004: Added support for NE2000 compatible (DP8390, DP83902) NICs. --- CHANGELOG | 7 + MAINTAINERS | 4 + MAKEALL | 13 +- Makefile | 6 + README | 17 +- board/omap2420h4/Makefile | 47 ++ board/omap2420h4/config.mk | 26 + board/omap2420h4/flash.c | 536 +++++++++++++ board/omap2420h4/mem.c | 306 +++++++ board/omap2420h4/omap2420h4.c | 834 ++++++++++++++++++++ board/omap2420h4/platform.S | 237 ++++++ board/omap2420h4/sys_info.c | 202 +++++ board/omap2420h4/u-boot.lds | 58 ++ common/env_flash.c | 34 +- cpu/arm1136/Makefile | 43 + cpu/arm1136/config.mk | 25 + cpu/arm1136/cpu.c | 163 ++++ cpu/arm1136/interrupts.c | 293 +++++++ cpu/arm1136/start.S | 414 ++++++++++ doc/README.ne2000 | 38 + drivers/8390.h | 126 +++ drivers/Makefile | 5 +- drivers/ne2000.c | 963 +++++++++++++++++++++++ drivers/ne2000.h | 279 +++++++ drivers/ns16550.c | 10 +- drivers/omap24xx_i2c.c | 317 ++++++++ drivers/serial.c | 9 +- include/asm-arm/arch-arm1136/bits.h | 49 ++ include/asm-arm/arch-arm1136/clocks.h | 79 ++ include/asm-arm/arch-arm1136/i2c.h | 106 +++ include/asm-arm/arch-arm1136/mem.h | 119 +++ include/asm-arm/arch-arm1136/mux.h | 158 ++++ include/asm-arm/arch-arm1136/omap2420.h | 200 +++++ include/asm-arm/arch-arm1136/rev.h | 59 ++ include/asm-arm/arch-arm1136/sizes.h | 50 ++ include/asm-arm/arch-arm1136/sys_info.h | 78 ++ include/asm-arm/arch-arm1136/sys_proto.h | 48 ++ include/asm-arm/io.h | 6 +- include/configs/omap2420h4.h | 213 +++++ include/ns16550.h | 2 +- lib_arm/cache.c | 7 + 41 files changed, 6158 insertions(+), 28 deletions(-) create mode 100644 board/omap2420h4/Makefile create mode 100644 board/omap2420h4/config.mk create mode 100644 board/omap2420h4/flash.c create mode 100644 board/omap2420h4/mem.c create mode 100644 board/omap2420h4/omap2420h4.c create mode 100644 board/omap2420h4/platform.S create mode 100644 board/omap2420h4/sys_info.c create mode 100644 board/omap2420h4/u-boot.lds create mode 100644 cpu/arm1136/Makefile create mode 100644 cpu/arm1136/config.mk create mode 100644 cpu/arm1136/cpu.c create mode 100644 cpu/arm1136/interrupts.c create mode 100644 cpu/arm1136/start.S create mode 100644 doc/README.ne2000 create mode 100644 drivers/8390.h create mode 100644 drivers/ne2000.c create mode 100644 drivers/ne2000.h create mode 100644 drivers/omap24xx_i2c.c create mode 100644 include/asm-arm/arch-arm1136/bits.h create mode 100644 include/asm-arm/arch-arm1136/clocks.h create mode 100644 include/asm-arm/arch-arm1136/i2c.h create mode 100644 include/asm-arm/arch-arm1136/mem.h create mode 100644 include/asm-arm/arch-arm1136/mux.h create mode 100644 include/asm-arm/arch-arm1136/omap2420.h create mode 100644 include/asm-arm/arch-arm1136/rev.h create mode 100644 include/asm-arm/arch-arm1136/sizes.h create mode 100644 include/asm-arm/arch-arm1136/sys_info.h create mode 100644 include/asm-arm/arch-arm1136/sys_proto.h create mode 100644 include/configs/omap2420h4.h diff --git a/CHANGELOG b/CHANGELOG index 36e8c2ec65..3b6d8da8f8 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,13 @@ Changes for U-Boot 1.1.3: ====================================================================== +* Patches by Richard Woodruff, 01 Oct 2004: + add support for the TI OMAP2420 processor and its H4 reference + board + +* Patch by Christian Pellegrin, 24 Sep 2004: + Added support for NE2000 compatible (DP8390, DP83902) NICs. + * Patch by Leif Lindholm, 23 Sep 2004: add support for the AMD db1550 board diff --git a/MAINTAINERS b/MAINTAINERS index f545016709..732f67f168 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -382,6 +382,10 @@ Rishi Bhattacharya omap5912osk ARM926EJS +Richard Woodruff + + omap2420h4 ARM1136EJS + David Müller smdk2410 ARM920T diff --git a/MAKEALL b/MAKEALL index 276cbbdcd0..a8d5bd9c32 100644 --- a/MAKEALL +++ b/MAKEALL @@ -157,6 +157,11 @@ LIST_ARM9=" \ versatile \ " +######################################################################### +## ARM11 Systems +######################################################################### +LIST_ARM11="omap2420h4" + ######################################################################### ## Xscale Systems ######################################################################### @@ -170,7 +175,11 @@ LIST_pxa=" \ LIST_ixp="ixdp425" -LIST_arm="${LIST_SA} ${LIST_ARM7} ${LIST_ARM9} ${LIST_pxa} ${LIST_ixp}" +LIST_arm=" \ + ${LIST_SA} \ + ${LIST_ARM7} ${LIST_ARM9} ${LIST_ARM11} \ + ${LIST_pxa} ${LIST_ixp} \ +" ######################################################################### ## MIPS Systems @@ -238,7 +247,7 @@ for arg in $@ do case "$arg" in ppc|5xx|5xxx|8xx|8220|824x|8260|85xx|4xx|7xx|74xx| \ - arm|SA|ARM7|ARM9|pxa|ixp| \ + arm|SA|ARM7|ARM9|ARM11|pxa|ixp| \ microblaze| \ mips| \ nios|nios2| \ diff --git a/Makefile b/Makefile index cda8754b50..363f1c5325 100644 --- a/Makefile +++ b/Makefile @@ -1403,6 +1403,12 @@ xm250_config : unconfig xsengine_config : unconfig @./mkconfig $(@:_config=) arm pxa xsengine +######################################################################### +## ARM1136 Systems +######################################################################### +omap2420h4_config : unconfig + @./mkconfig $(@:_config=) arm arm1136 omap2420h4 + #======================================================================== # i386 #======================================================================== diff --git a/README b/README index 32341f42b9..50e58dc534 100644 --- a/README +++ b/README @@ -130,6 +130,7 @@ Directory Hierarchy: - s3c24x0 Files specific to Samsung S3C24X0 CPUs - arm925t Files specific to ARM 925 CPUs - arm926ejs Files specific to ARM 926 CPUs + - arm1136 Files specific to ARM 1136 CPUs - at91rm9200 Files specific to Atmel AT91RM9200 CPUs - i386 Files specific to i386 CPUs - ixp Files specific to Intel XScale IXP CPUs @@ -301,13 +302,13 @@ The following options need to be configured: ARM based boards: ----------------- - CONFIG_AT91RM9200DK, CONFIG_CERF250, CONFIG_DNP1110, - CONFIG_EP7312, CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE, - CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610, - CONFIG_LART, CONFIG_LPD7A400 CONFIG_LUBBOCK, - CONFIG_OSK_OMAP5912, CONFIG_SHANNON, CONFIG_P2_OMAP730, - CONFIG_SMDK2400, CONFIG_SMDK2410, CONFIG_TRAB, - CONFIG_VCMA9 + CONFIG_AT91RM9200DK, CONFIG_CERF250, CONFIG_DNP1110, + CONFIG_EP7312, CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE, + CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610, + CONFIG_LART, CONFIG_LPD7A400 CONFIG_LUBBOCK, + CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4, CONFIG_SHANNON, + CONFIG_P2_OMAP730, CONFIG_SMDK2400, CONFIG_SMDK2410, + CONFIG_TRAB, CONFIG_VCMA9 MicroBlaze based boards: ------------------------ @@ -2177,7 +2178,7 @@ configurations; the following names are supported: FADS850SAR_config omap1610h2_config TQM850L_config FADS860T_config omap1610inn_config TQM855L_config FPS850L_config omap5912osk_config TQM860L_config - WALNUT405_config + omap2420h4_config WALNUT405_config Yukon8220_config ZPC1900_config diff --git a/board/omap2420h4/Makefile b/board/omap2420h4/Makefile new file mode 100644 index 0000000000..deab6b6d1c --- /dev/null +++ b/board/omap2420h4/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := omap2420h4.o flash.o mem.o sys_info.o +SOBJS := platform.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/omap2420h4/config.mk b/board/omap2420h4/config.mk new file mode 100644 index 0000000000..1c770f30ac --- /dev/null +++ b/board/omap2420h4/config.mk @@ -0,0 +1,26 @@ +# +# (C) Copyright 2004 +# Texas Instruments, +# +# TI H4 board with OMAP2420 (ARM1136) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# H4 has 1 bank of 32MB or 64MB mDDR-SDRAM on CS0 +# H4 has 1 bank of 32MB or 00MB mDDR-SDRAM on CS1 +# Physical Address: +# 8000'0000 (bank0) +# A000/0000 (bank1) ES2 will be configurable +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# For use with external or internal boots. +# CONFIG_PARTIAL_SRAM must be defined to use this. +TEXT_BASE = 0x80e80000 + +# Used with full SRAM boot. +# This is either with a GP system or a signed boot image. +# easiest, and safest way to go if you can. +# Comment out //CONFIG_PARTIAL_SRAM for this one. +# +#TEXT_BASE = 0x40280000 + diff --git a/board/omap2420h4/flash.c b/board/omap2420h4/flash.c new file mode 100644 index 0000000000..3b6a69f57b --- /dev/null +++ b/board/omap2420h4/flash.c @@ -0,0 +1,536 @@ +/* + * (C) Copyright 2001 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2001-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2003 + * Texas Instruments, + * Kshitij Gupta + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#define PHYS_FLASH_SECT_SIZE SZ_128K +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +/* Board support for 1 or 2 flash devices */ +#undef FLASH_PORT_WIDTH32 +#define FLASH_PORT_WIDTH16 + +#ifdef FLASH_PORT_WIDTH16 +# define FLASH_PORT_WIDTH ushort +# define FLASH_PORT_WIDTHV vu_short +# define SWAP(x) __swab16(x) +#else +# define FLASH_PORT_WIDTH ulong +# define FLASH_PORT_WIDTHV vu_long +# define SWAP(x) __swab32(x) +#endif + +#define FPW FLASH_PORT_WIDTH +#define FPWV FLASH_PORT_WIDTHV + +#define mb() __asm__ __volatile__ ("" : : : "memory") + + +/* Flash Organization Structure */ +typedef struct OrgDef { + unsigned int sector_number; + unsigned int sector_size; +} OrgDef; + + +/* Flash Organizations */ +OrgDef OrgIntel_28F256L18T[] = { + {4, SZ_32K}, /* 4 * 32kBytes sectors */ + {255, SZ_128K}, /* 255 * 128kBytes sectors */ +}; + + +/*----------------------------------------------------------------------- + * Functions + */ +unsigned long flash_init (void); +static ulong flash_get_size (FPW * addr, flash_info_t * info); +static int write_data (flash_info_t * info, ulong dest, FPW data); +static void flash_get_offsets (ulong base, flash_info_t * info); +void inline spin_wheel (void); +void flash_print_info (flash_info_t * info); +void flash_unprotect_sectors (FPWV * addr); +int flash_erase (flash_info_t * info, int s_first, int s_last); +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt); +void flash_unlock(flash_info_t * info, int bank); +int flash_probe(void); + +/*----------------------------------------------------------------------- + */ + +/* see if flash is ok */ +int flash_probe(void) +{ + return(flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[0])); +} + +unsigned long flash_init (void) +{ + int i; + ulong size = 0; + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + switch (i) { + case 0: + flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]); + flash_get_offsets (PHYS_FLASH_1, &flash_info[i]); + /* to reset the lock bit */ + flash_unlock(&flash_info[i],i); + break; + case 1: + flash_get_size ((FPW *) PHYS_FLASH_2, &flash_info[i]); + flash_get_offsets (PHYS_FLASH_2, &flash_info[i]); + /* to reset the lock bit */ + flash_unlock(&flash_info[i],i); + break; + + default: + panic ("configured too many flash banks!\n"); + break; + } + size += flash_info[i].size; + } + + /* Protect monitor and environment sectors + */ + flash_protect (FLAG_PROTECT_SET, + CFG_FLASH_BASE, + CFG_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]); + + flash_protect (FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]); + + return size; +} + +/*----------------------------------------------------------------------- + */ +void flash_unlock(flash_info_t * info, int bank) +{ + int j; + if (!bank) + j=2; /* leave 0,1 locked for boot bank */ + else + j=0; /* get the whole bank for #2 */ + + for (;jstart[j]); + if (addr == NULL) { + printf("Warning Flash probe failed\n"); + break; + } + flash_unprotect_sectors (addr); + *addr = (FPW) 0x00500050;/* clear status register */ + *addr = (FPW) 0x00FF00FF;/* resest to read mode */ + } +} + +/*----------------------------------------------------------------------- + */ +static void flash_get_offsets (ulong base, flash_info_t * info) +{ + int i; + volatile int r; /* gcc 3.4.0-1 strangeness, need to follow up.*/ + + if (info->flash_id == FLASH_UNKNOWN) { + return; + } + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { + for (i = 0; i < info->sector_count; i++) { + if (i > 254) { /* 255,256,257,258 */ + r=i; + info->start[i] = base + (((r-(int)255) * SZ_32K) + (255*PHYS_FLASH_SECT_SIZE)); + info->protect[i] = 0; + } else { + info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE); + info->protect[i] = 0; + } + } + } +} + +/*----------------------------------------------------------------------- + */ +void flash_print_info (flash_info_t * info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) { + printf ("missing or unknown FLASH type\n"); + return; + } + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_INTEL: + printf ("INTEL "); + break; + default: + printf ("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_28F256L18T: + printf ("FLASH 28F256L18T\n"); + break; + default: + printf ("Unknown Chip Type\n"); + break; + } + + printf (" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); + + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + if ((i % 5) == 0) + printf ("\n "); + printf (" %08lX%s", + info->start[i], info->protect[i] ? " (RO)" : " "); + } + printf ("\n"); + return; +} + +/* + * The following code cannot be run from FLASH! + */ +static ulong flash_get_size (FPW * addr, flash_info_t * info) +{ + volatile FPW value; + /* mb(); this one makes ARM11 err go away, but I want it :) as a guide to problems */ + + /* Write auto select command: read Manufacturer ID */ + addr[0x5555] = (FPW) 0x00AA00AA; + addr[0x2AAA] = (FPW) 0x00550055; + addr[0x5555] = (FPW) 0x00900090; + + mb (); + value = addr[0] & 0xFF; /* just looking for 89 (8989 is hw pat)*/ + + switch (value) { + + case (FPW) INTEL_MANUFACT: + info->flash_id = FLASH_MAN_INTEL; + break; + + default: + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ + return(0); /* no or unknown flash */ + } + + mb (); + value = addr[1]; /* device ID */ + switch (value) { + + case (FPW) (INTEL_ID_28F256L18T): /* 880D */ + info->flash_id += FLASH_28F256L18T; + info->sector_count = 259; /*0-258*/ + info->size = SZ_32M; + break; /* => 32 MB */ + + default: + info->flash_id = FLASH_UNKNOWN; + break; + } + + if (info->sector_count > CFG_MAX_FLASH_SECT) { + printf ("** ERROR: sector count %d > max (%d) **\n", + info->sector_count, CFG_MAX_FLASH_SECT); + info->sector_count = CFG_MAX_FLASH_SECT; + } + + addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ + + return(info->size); +} + + +/* unprotects a sector for write and erase + * on some intel parts, this unprotects the entire chip, but it + * wont hurt to call this additional times per sector... + */ +void flash_unprotect_sectors (FPWV * addr) +{ +#define PD_FINTEL_WSMS_READY_MASK 0x0080 + + *addr = (FPW) 0x00500050; /* clear status register */ + + /* this sends the clear lock bit command */ + *addr = (FPW) 0x00600060; + *addr = (FPW) 0x00D000D0; +} + + +/*----------------------------------------------------------------------- + */ + +int flash_erase (flash_info_t * info, int s_first, int s_last) +{ + int prot, sect; + ulong type, start, last; + int rcode = 0; +#ifdef CONFIG_USE_IRQ + int iflag; +#endif + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) { + printf ("- missing\n"); + } else { + printf ("- no sectors to erase\n"); + } + return 1; + } + + type = (info->flash_id & FLASH_VENDMASK); + if ((type != FLASH_MAN_INTEL)) { + printf ("Can't erase unknown flash type %08lx - aborted\n", + info->flash_id); + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) { + printf ("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf ("\n"); + } + + + start = get_timer (0); + last = start; + +#ifdef CONFIG_USE_IRQ + /* Disable interrupts which might cause a timeout here */ + iflag = disable_interrupts (); +#endif + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + FPWV *addr = (FPWV *) (info->start[sect]); + FPW status; + + printf ("Erasing sector %2d ... ", sect); + + flash_unprotect_sectors (addr); + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + *addr = (FPW) 0x00500050;/* clear status register */ + *addr = (FPW) 0x00200020;/* erase setup */ + *addr = (FPW) 0x00D000D0;/* erase confirm */ + + while (((status = + *addr) & (FPW) 0x00800080) != + (FPW) 0x00800080) { + if (get_timer_masked () > + CFG_FLASH_ERASE_TOUT) { + printf ("Timeout\n"); + /* suspend erase */ + *addr = (FPW) 0x00B000B0; + /* reset to read mode */ + *addr = (FPW) 0x00FF00FF; + rcode = 1; + break; + } + } + + /* clear status register cmd. */ + *addr = (FPW) 0x00500050; + *addr = (FPW) 0x00FF00FF;/* resest to read mode */ + printf (" done\n"); + } + } +#ifdef CONFIG_USE_IRQ + if (iflag) + enable_interrupts(); +#endif + + return rcode; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + * 4 - Flash not identified + */ + +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + ulong cp, wp; + FPW data; + int count, i, l, rc, port_width; + + if (info->flash_id == FLASH_UNKNOWN) { + return 4; + } +/* get lower word aligned address */ +#ifdef FLASH_PORT_WIDTH16 + wp = (addr & ~1); + port_width = 2; +#else + wp = (addr & ~3); + port_width = 4; +#endif + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i = 0, cp = wp; i < l; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + for (; i < port_width && cnt > 0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + for (; cnt == 0 && i < port_width; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + if ((rc = write_data (info, wp, SWAP (data))) != 0) { + return(rc); + } + wp += port_width; + } + + /* + * handle word aligned part + */ + count = 0; + while (cnt >= port_width) { + data = 0; + for (i = 0; i < port_width; ++i) { + data = (data << 8) | *src++; + } + if ((rc = write_data (info, wp, SWAP (data))) != 0) { + return(rc); + } + wp += port_width; + cnt -= port_width; + if (count++ > 0x800) { + spin_wheel (); + count = 0; + } + } + + if (cnt == 0) { + return(0); + } + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { + data = (data << 8) | *src++; + --cnt; + } + for (; i < port_width; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + return(write_data (info, wp, SWAP (data))); +} + +/*----------------------------------------------------------------------- + * Write a word or halfword to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +static int write_data (flash_info_t * info, ulong dest, FPW data) +{ + FPWV *addr = (FPWV *) dest; + ulong status; +#ifdef CONFIG_USE_IRQ + int iflag; +#endif + + /* Check if Flash is (sufficiently) erased */ + if ((*addr & data) != data) { + printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr); + return(2); + } + /* Disable interrupts which might cause a timeout here */ +#ifdef CONFIG_USE_IRQ + iflag = disable_interrupts (); +#endif + *addr = (FPW) 0x00400040; /* write setup */ + *addr = data; + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + /* wait while polling the status register */ + while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { + if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) { + *addr = (FPW) 0x00FF00FF; /* restore read mode */ + return(1); + } + } + *addr = (FPW) 0x00FF00FF; /* restore read mode */ + +#ifdef CONFIG_USE_IRQ + if (iflag) + enable_interrupts(); +#endif + + return(0); +} + +void inline spin_wheel (void) +{ + static int p = 0; + static char w[] = "\\/-"; + + printf ("\010%c", w[p]); + (++p == 3) ? (p = 0) : 0; +} diff --git a/board/omap2420h4/mem.c b/board/omap2420h4/mem.c new file mode 100644 index 0000000000..a3b3453606 --- /dev/null +++ b/board/omap2420h4/mem.c @@ -0,0 +1,306 @@ +/* + * (C) Copyright 2004 + * Texas Instruments, + * Richard Woodruff + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/************************************************************ + * sdelay() - simple spin loop. Will be constant time as + * its generally used in 12MHz bypass conditions only. This + * is necessary until timers are accessible. + * + * not inline to increase chances its in cache when called + *************************************************************/ +void sdelay (unsigned long loops) +{ + __asm__ volatile ("1:\n" + "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0" (loops)); +} + +/********************************************************************************* + * prcm_init() - inits clocks for PRCM as defined in clocks.h (config II default). + * -- called from SRAM, or Flash (using temp SRAM stack). + *********************************************************************************/ +void prcm_init(void) +{ + u32 rev,div; +#ifdef CONFIG_PARTIAL_SRAM + void (*f_lock_pll) (u32, u32, u32, u32); + extern void *_end_vect, *_start; + + f_lock_pll = (void *)((u32)&_end_vect - (u32)&_start + SRAM_VECT_CODE); +#endif + + __raw_writel(0, CM_FCLKEN1_CORE); /* stop all clocks to reduce ringing */ + __raw_writel(0, CM_FCLKEN2_CORE); /* may not be necessary */ + __raw_writel(0, CM_ICLKEN1_CORE); + __raw_writel(0, CM_ICLKEN2_CORE); + + __raw_writel(DPLL_OUT, CM_CLKSEL2_PLL); /* set DPLL out */ + __raw_writel(MPU_DIV, CM_CLKSEL_MPU); /* set MPU divider */ + __raw_writel(DSP_DIV, CM_CLKSEL_DSP); /* set dsp and iva dividers */ + __raw_writel(GFX_DIV, CM_CLKSEL_GFX); /* set gfx dividers */ + + rev = get_cpu_rev(); + if (rev == CPU_2420_ES1 || rev == CPU_2422_ES1) + div = BUS_DIV_ES1; + else + div = BUS_DIV; + __raw_writel(div, CM_CLKSEL1_CORE);/* set L3/L4/USB/Display/Vlnc/SSi dividers */ + sdelay(1000); + +#ifndef CONFIG_PARTIAL_SRAM + /* If running fully from SRAM this is OK. The Flash bus drops out for just a little. + * but then comes back. If running from Flash this sequence kills you, thus you need + * to run it using CONFIG_PARTIAL_SRAM. + */ + __raw_writel(MODE_BYPASS_FAST, CM_CLKEN_PLL); /* go to bypass, fast relock */ + wait_on_value(BIT0|BIT1, BIT1, CM_IDLEST_CKGEN, LDELAY); /* wait till in bypass */ + + /* set clock selection and dpll dividers. */ + __raw_writel(DPLL_VAL, CM_CLKSEL1_PLL); /* set pll for target rate */ + __raw_writel(COMMIT_DIVIDERS, PRCM_CLKCFG_CTRL); /* commit dividers */ + sdelay(10000); + __raw_writel(DPLL_LOCK, CM_CLKEN_PLL); /* enable dpll */ + sdelay(10000); + wait_on_value(BIT0|BIT1, BIT2, CM_IDLEST_CKGEN, LDELAY); /*wait for dpll lock */ +#else +/* if running from flash, need to jump to small relocated code area in SRAM. + * This is the only safe spot to do configurations from. + */ + (*f_lock_pll)(PRCM_CLKCFG_CTRL, CM_CLKEN_PLL, DPLL_LOCK, CM_IDLEST_CKGEN); +#endif + + __raw_writel(DPLL_LOCK|APLL_LOCK, CM_CLKEN_PLL); /* enable apll */ + wait_on_value(BIT8, BIT8, CM_IDLEST_CKGEN, LDELAY); /* wait for apll lock */ + sdelay(1000); +} + +/*********************************************** + * memif_init() - init the gpmc and sdrc + * - early init routines, called from flash or + * SRAM. + ***********************************************/ +void memif_init(void) +{ + sdrc_init(); +#ifndef CONFIG_PARTIAL_SRAM /* don't init if calling from flash */ + gpmc_init(); +#endif +} + +/******************************************************** + * mem_ok() - test used to see if timings are correct + * for a part. Helps in gussing which part + * we are currently using. + *******************************************************/ +u32 mem_ok(void) +{ u32 val; + __raw_writel(0x0,OMAP2420_SDRC_CS0+0x400); /* clear pos A */ + __raw_writel(0x12345678, OMAP2420_SDRC_CS0);/* pattern to pos B */ + val = __raw_readl(OMAP2420_SDRC_CS0+0x400); /* get pos A value */ + if (val != 0) /* see if pos A value changed*/ + return(0); + else + return(1); +} + +/******************************************************** + * sdrc_init() - init the sdrc chip selects CS0 and CS1 + * - early init routines, called from flash or + * SRAM. + *******************************************************/ +void sdrc_init(void) +{ + #define EARLY_INIT 1 + do_sdrc_init(SDRC_CS0_OSET, EARLY_INIT); /* only init up first bank here */ +} + +/********************************************************** + * do_sdrc_init(): initialize the SDRAM for use. + * -called from low level code with stack only. + * -code sets up SDRAM timing and muxing for 2422 or 2420. + * -optimal settings can be placed here, or redone after i2c + * inspection of board info + * + * !!! When ES1 comes out need to conditionalize RFR value!!! + **********************************************************/ +void do_sdrc_init(u32 offset, u32 early) +{ + u32 cpu, bug=0, rev, shared=0, cs0=0, pmask=0,first=1; + sdrc_data_t *sdata; /* do not change type */ + + static const sdrc_data_t sdrc_2422 = + { + H4_2422_SDRC_SHARING, H4_2422_SDRC_MDCFG_0, H4_2422_SDRC_ACTIM_CTRLA_0, + H4_2422_SDRC_ACTIM_CTRLB_0, H4_2422_SDRC_RFR_CTRL_ES1, H4_2422_SDRC_MR_0, + H4_2422_SDRC_DLLA_CTRL, H4_2422_SDRC_DLLB_CTRL + }; + static const sdrc_data_t sdrc_2420 = + { + H4_2420_SDRC_SHARING, H4_2420_SDRC_MDCFG_0, H4_2420_SDRC_ACTIM_CTRLA_0, + H4_2420_SDRC_ACTIM_CTRLB_0, H4_2420_SDRC_RFR_CTRL_ES1, H4_2420_SDRC_MR_0, + H4_2420_SDRC_DLLA_CTRL, H4_2420_SDRC_DLLB_CTRL + }; + + if (offset == SDRC_CS0_OSET) + cs0 = shared = 1; /* int regs shared between both chip select */ + + cpu = get_cpu_type(); + + /* warning generated, though code generation is correct. this may bite later, but is ok for now. + * there is only so much C code you can do on stack only operation. + */ + if (cpu == CPU_2422) + sdata = &sdrc_2422; + else + sdata = &sdrc_2420; + __asm__ __volatile__("": : :"memory"); +#ifdef CONFIG_PARTIAL_SRAM + /* u-boot is compiled to run in DDR at 8xxxxxxx. If we use data here which is not pc relative + * we need to get the address correct. We need to find the current flash mapping to dress up + * the initial pointer load. As long as this is const data we should be ok. + */ + if(early) + sdata = (sdrc_data_t *)(((u32)sdata & 0x0003FFFF) | get_gpmc0_base()); +#endif + + men_combo: + + if (!early && get_mem_type() == DDR_COMBO) { /* combo part has a shared CKE signal, can't use feature */ + pmask = BIT2; + first = 0; /* trigger ddr_combo init */ + } + + if (shared) { + __raw_writel(__raw_readl(SMS_SYSCONFIG)|SMART_IDLE, SMS_SYSCONFIG); + __raw_writel(SMART_IDLE|SOFTRESET, SDRC_SYSCONFIG); /* reset sdrc */ + wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000); /* wait till reset done set */ + __raw_writel(SMART_IDLE, SDRC_SYSCONFIG); /* clear soft reset */ + __raw_writel(sdata->sdrc_sharing, SDRC_SHARING); + __raw_writel((__raw_readl(SDRC_POWER)|SMART_IDLE) & ~pmask, SDRC_POWER); + } + if (first) + __raw_writel(sdata->sdrc_mdcfg_0, SDRC_MCFG_0+offset); + else { + __raw_writel((__raw_readl(SDRC_POWER)|SMART_IDLE) & ~pmask, SDRC_POWER); + __raw_writel(H4_2420_COMBO_MDCFG_0,SDRC_MCFG_0+offset); + } + + if (cs0) { + __raw_writel(sdata->sdrc_actim_ctrla_0, SDRC_ACTIM_CTRLA_0); + __raw_writel(sdata->sdrc_actim_ctrlb_0, SDRC_ACTIM_CTRLB_0); + } else { + __raw_writel(sdata->sdrc_actim_ctrla_0, SDRC_ACTIM_CTRLA_1); + __raw_writel(sdata->sdrc_actim_ctrlb_0, SDRC_ACTIM_CTRLB_1); + } + + __raw_writel(sdata->sdrc_rfr_ctrl, SDRC_RFR_CTRL+offset); + + /* init sequence for _mDDR_ using manual commands (DDR is a bit different) */ + __raw_writel(CMD_NOP, SDRC_MANUAL_0+offset); + sdelay(5000); /* susposed to be 100us per design spec for mddr*/ + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0+offset); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0+offset); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0+offset); + + /* + * CSx SDRC Mode Register + * Burst length = 4 - DDR memory + * Serial mode + * CAS latency = x + */ + __raw_writel(sdata->sdrc_mr_0, SDRC_MR_0+offset); + + /* NOTE: ES1 242x _BUG_ DLL */ + rev = get_cpu_rev(); + if (rev == CPU_2420_ES1 || rev == CPU_2422_ES1) + bug = BIT0; + /* enable & load up DLL with good value for 75MHz, and set phase to 90% */ + if (shared) { + __raw_writel(sdata->sdrc_dlla_ctrl, SDRC_DLLA_CTRL); + __raw_writel(sdata->sdrc_dlla_ctrl & ~(BIT2|bug), SDRC_DLLA_CTRL); + __raw_writel(sdata->sdrc_dllb_ctrl, SDRC_DLLB_CTRL); + __raw_writel(sdata->sdrc_dllb_ctrl & ~(BIT2|bug) , SDRC_DLLB_CTRL); + } + sdelay(9000); + if (!first || mem_ok()) /* passed test or 2nd bank init */ + return; + else { + first = 0; + goto men_combo; + } +} + + +/***************************************************** + * gpmc_init(): init gpmc bus + * Init GPMC for x16, MuxMode (SDRAM in x32). + * This code can only be executed from SRAM or SDRAM. + *****************************************************/ +void gpmc_init(void) +{ + u32 mux=0, mtype, mwidth; + + /* global settings */ + __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */ + __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */ + __raw_writel(0x1, GPMC_TIMEOUT_CONTROL);/* timeout disable */ + __raw_writel(0x111, GPMC_CONFIG); /* set nWP, disable limited addr */ + + /* discover bus connection from sysboot */ + if (is_gpmc_muxed() == GPMC_MUXED) + mux = BIT9; + mtype = get_gpmc0_type(); + mwidth = get_gpmc0_width(); + + /* setup cs0 */ + __raw_writel(0x0, GPMC_CONFIG7_0); /* disable current map */ + sdelay(1000); + __raw_writel(H4_24XX_GPMC_CONFIG1_0|mux|mtype|mwidth, GPMC_CONFIG1_0); + //__raw_writel(H4_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_0); + __raw_writel(H4_24XX_GPMC_CONFIG3_0, GPMC_CONFIG3_0); + __raw_writel(H4_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_0); + //__raw_writel(H4_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_0); + __raw_writel(H4_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_0);/* enable new mapping */ + sdelay(2000); + + /* setup cs1 */ + __raw_writel(0, GPMC_CONFIG7_1); /* disable any mapping */ + sdelay(1000); + __raw_writel(H4_24XX_GPMC_CONFIG1_1|mux, GPMC_CONFIG1_1); + __raw_writel(H4_24XX_GPMC_CONFIG2_1, GPMC_CONFIG2_1); + __raw_writel(H4_24XX_GPMC_CONFIG3_1, GPMC_CONFIG3_1); + __raw_writel(H4_24XX_GPMC_CONFIG4_1, GPMC_CONFIG4_1); + __raw_writel(H4_24XX_GPMC_CONFIG5_1, GPMC_CONFIG5_1); + __raw_writel(H4_24XX_GPMC_CONFIG6_1, GPMC_CONFIG6_1); + __raw_writel(H4_24XX_GPMC_CONFIG7_1, GPMC_CONFIG7_1); /* enable mapping */ + sdelay(2000); +} + diff --git a/board/omap2420h4/omap2420h4.c b/board/omap2420h4/omap2420h4.c new file mode 100644 index 0000000000..4696a71330 --- /dev/null +++ b/board/omap2420h4/omap2420h4.c @@ -0,0 +1,834 @@ +/* + * (C) Copyright 2004 + * Texas Instruments, + * Richard Woodruff + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static void wait_for_command_complete(unsigned int wd_base); + +/******************************************************* + * Routine: delay + * Description: spinning delay to use before udelay works + ******************************************************/ +static inline void delay (unsigned long loops) +{ + __asm__ volatile ("1:\n" + "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0" (loops)); +} + +/***************************************** + * Routine: board_init + * Description: Early hardware init. + *****************************************/ +int board_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; +#ifndef CONFIG_PARTIAL_SRAM + s_init(0x0); /* full sram build, never skip clock and sdrc, no point */ +#else + gpmc_init(); +#endif + gd->bd->bi_arch_number = MACH_TYPE_OMAP_H4; /* board id for linux */ + gd->bd->bi_boot_params = (OMAP2420_SDRC_CS0+0x100); /* adress of boot parameters */ + + return 0; +} + +/********************************************************** + * Routine: s_init + * Description: Does early system init of muxing and clocks. + * - Called at time when only stack is available. + **********************************************************/ +void s_init(int skip) +{ + watchdog_init(); + set_muxconf_regs(); + delay(100); + + if (!skip) + prcm_init(); + + peripheral_enable(); + icache_enable(); +#ifndef CONFIG_APTIX + if (!skip) + memif_init(); +#endif +} + +/******************************************************* + * Routine: misc_init_r + * Description: Init ethernet (done here so udelay works) + ********************************************************/ +int misc_init_r (void) +{ + ether_init(); /* better done here so timers are init'ed */ + return(0); +} + +/**************************************** + * Routine: watchdog_init + * Description: Shut down watch dogs + *****************************************/ +void watchdog_init(void) +{ + int mode; +#define GP (BIT8|BIT9) + + /* There are 4 watch dogs. 1 secure, and 3 general purpose. + * I would expect that the ROM takes care of the secure one, + * but we will try also. Of the 3 GP ones, 1 can reset us + * directly, the other 2 only generate MPU interrupts. + */ + mode = (__raw_readl(CONTROL_STATUS) & (BIT8|BIT9)); + if (mode == GP) { + __raw_writel(WD_UNLOCK1 ,WD1_BASE+WSPR); + wait_for_command_complete(WD1_BASE); + __raw_writel(WD_UNLOCK2 ,WD1_BASE+WSPR); + } + __raw_writel(WD_UNLOCK1 ,WD2_BASE+WSPR); + wait_for_command_complete(WD2_BASE); + __raw_writel(WD_UNLOCK2 ,WD2_BASE+WSPR); + +#if MPU_WD_CLOCKED /* value 0x10 stick on aptix, BIT4 polarity seems oppsite*/ + __raw_writel(WD_UNLOCK1 ,WD3_BASE+WSPR); + wait_for_command_complete(WD3_BASE); + __raw_writel(WD_UNLOCK2 ,WD3_BASE+WSPR); + + __raw_writel(WD_UNLOCK1 ,WD4_BASE+WSPR); + wait_for_command_complete(WD4_BASE); + __raw_writel(WD_UNLOCK2 ,WD4_BASE+WSPR); +#endif +} + +/****************************************************** + * Routine: wait_for_command_complete + * Description: Wait for posting to finish on watchdog + ******************************************************/ +static void wait_for_command_complete(unsigned int wd_base) +{ + int pending = 1; + do { + pending = __raw_readl(wd_base+WWPS); + } while (pending); +} + +/******************************************************************* + * Routine:ether_init + * Description: take the Ethernet controller out of reset and wait + * for the EEPROM load to complete. + ******************************************************************/ +void ether_init (void) +{ +#ifdef CONFIG_DRIVER_LAN91C96 + int cnt = 20; + + __raw_writew(0x0, LAN_RESET_REGISTER); + do { + __raw_writew(0x1, LAN_RESET_REGISTER); + udelay (100); + if (cnt == 0) + goto h4reset_err_out; + --cnt; + } while (__raw_readw(LAN_RESET_REGISTER) != 0x1); + + cnt = 20; + + do { + __raw_writew(0x0, LAN_RESET_REGISTER); + udelay (100); + if (cnt == 0) + goto h4reset_err_out; + --cnt; + } while (__raw_readw(LAN_RESET_REGISTER) != 0x0000); + udelay (1000); + + *((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01; + udelay (1000); + + h4reset_err_out: + return; +#endif +} + +/********************************************** + * Routine: dram_init + * Description: sets uboots idea of sdram size + **********************************************/ +int dram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + unsigned int size0=0,size1=0; + u32 mtype, btype; +#define NOT_EARLY 0 + + i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); /* need this a bit early */ + + btype = get_board_type(); + mtype = get_mem_type(); + + display_board_info(btype); + if (btype == BOARD_H4_MENELAUS) + update_mux(btype,mtype); + + if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED)) { + do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY); /* init other chip select */ + size0 = size1 = SZ_32M; + } else + size0 = SZ_64M; + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = size0; + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = size1; + + return 0; +} + +/********************************************************** + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers + * specific to the hardware + *********************************************************/ +void set_muxconf_regs (void) +{ + muxSetupSDRC(); + muxSetupGPMC(); + muxSetupUsb0(); + muxSetupUart3(); + muxSetupI2C1(); + muxSetupUART1(); + muxSetupLCD(); + muxSetupCamera(); + muxSetupMMCSD(); + muxSetupTouchScreen(); + muxSetupHDQ(); +} + +/***************************************************************** + * Routine: peripheral_enable + * Description: Enable the clks & power for perifs (GPT2, UART1,...) + ******************************************************************/ +void peripheral_enable(void) +{ + unsigned int v, if_clks=0, func_clks=0; + + /* Enable GP2 timer.*/ + if_clks |= BIT4; + func_clks |= BIT4; + v = __raw_readl(CM_CLKSEL2_CORE) | 0x4; /* Sys_clk input OMAP2420_GPT2 */ + __raw_writel(v, CM_CLKSEL2_CORE); + __raw_writel(0x1, CM_CLKSEL_WKUP); + +#ifdef CFG_NS16550 + /* Enable UART1 clock */ + func_clks |= BIT21; + if_clks |= BIT21; +#endif + v = __raw_readl(CM_ICLKEN1_CORE) | if_clks; /* Interface clocks on */ + __raw_writel(v,CM_ICLKEN1_CORE ); + v = __raw_readl(CM_FCLKEN1_CORE) | func_clks; /* Functional Clocks on */ + __raw_writel(v, CM_FCLKEN1_CORE); + delay(1000); + +#ifndef KERNEL_UPDATED + { +#define V1 0xffffffff +#define V2 0x00000007 + + __raw_writel(V1, CM_FCLKEN1_CORE); + __raw_writel(V2, CM_FCLKEN2_CORE); + __raw_writel(V1, CM_ICLKEN1_CORE); + __raw_writel(V1, CM_ICLKEN2_CORE); + } +#endif +} + +/**************************************** + * Routine: muxSetupUsb0 (ostboot) + * Description: Setup usb muxing + *****************************************/ +void muxSetupUsb0(void) +{ + volatile uint8 *MuxConfigReg; + volatile uint32 *otgCtrlReg; + + MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_PUEN; + *MuxConfigReg &= (uint8)(~0x1F); + + MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_VP; + *MuxConfigReg &= (uint8)(~0x1F); + + MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_VM; + *MuxConfigReg &= (uint8)(~0x1F); + + MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_RCV; + *MuxConfigReg &= (uint8)(~0x1F); + + MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_TXEN; + *MuxConfigReg &= (uint8)(~0x1F); + + MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_SE0; + *MuxConfigReg &= (uint8)(~0x1F); + + MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_DAT; + *MuxConfigReg &= (uint8)(~0x1F); + + /* setup for USB VBus detection */ + otgCtrlReg = (volatile uint32 *)USB_OTG_CTRL; + *otgCtrlReg |= 0x00040000; /* bit 18 */ +} + +/**************************************** + * Routine: muxSetupUart3 (ostboot) + * Description: Setup uart3 muxing + *****************************************/ +void muxSetupUart3(void) +{ + volatile uint8 *MuxConfigReg; + + MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_UART3_TX_IRTX; + *MuxConfigReg &= (uint8)(~0x1F); + + MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_UART3_RX_IRRX; + *MuxConfigReg &= (uint8)(~0x1F); +} + +/**************************************** + * Routine: muxSetupI2C1 (ostboot) + * Description: Setup i2c muxing + *****************************************/ +void muxSetupI2C1(void) +{ + volatile unsigned char *MuxConfigReg; + + /* I2C1 Clock pin configuration, PIN = M19 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_I2C1_SCL; + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* I2C1 Data pin configuration, PIN = L15 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_I2C1_SDA; + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* Pull-up required on data line */ + /* external pull-up already present. */ + /* *MuxConfigReg |= 0x18 ;*/ /* Mode = 0, PullTypeSel=PU, PullUDEnable=Enabled */ +} + +/**************************************** + * Routine: muxSetupUART1 (ostboot) + * Description: Set up uart1 muxing + *****************************************/ +void muxSetupUART1(void) +{ + volatile unsigned char *MuxConfigReg; + + /* UART1_CTS pin configuration, PIN = D21 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_CTS; + *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */ + + /* UART1_RTS pin configuration, PIN = H21 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RTS; + *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */ + + /* UART1_TX pin configuration, PIN = L20 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_TX; + *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */ + + /* UART1_RX pin configuration, PIN = T21 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RX; + *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */ +} + +/**************************************** + * Routine: muxSetupLCD (ostboot) + * Description: Setup lcd muxing + *****************************************/ +void muxSetupLCD(void) +{ + volatile unsigned char *MuxConfigReg; + + /* LCD_D0 pin configuration, PIN = Y7 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D0; + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* LCD_D1 pin configuration, PIN = P10 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D1; + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* LCD_D2 pin configuration, PIN = V8 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D2; + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* LCD_D3 pin configuration, PIN = Y8 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D3; + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* LCD_D4 pin configuration, PIN = W8 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D4; + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* LCD_D5 pin configuration, PIN = R10 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D5; + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* LCD_D6 pin configuration, PIN = Y9 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D6; + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* LCD_D7 pin configuration, PIN = V9 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D7; + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* LCD_D8 pin configuration, PIN = W9 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D8; + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* LCD_D9 pin configuration, PIN = P11 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D9; + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* LCD_D10 pin configuration, PIN = V10 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D10; + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* LCD_D11 pin configuration, PIN = Y10 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D11; + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* LCD_D12 pin configuration, PIN = W10 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D12; + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* LCD_D13 pin configuration, PIN = R11 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D13; + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* LCD_D14 pin configuration, PIN = V11 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D14; + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* LCD_D15 pin configuration, PIN = W11 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D15; + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* LCD_D16 pin configuration, PIN = P12 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D16; + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* LCD_D17 pin configuration, PIN = R12 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D17; + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* LCD_PCLK pin configuration, PIN = W6 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_PCLK; + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* LCD_VSYNC pin configuration, PIN = V7 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_VSYNC; + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* LCD_HSYNC pin configuration, PIN = Y6 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_HSYNC; + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* LCD_ACBIAS pin configuration, PIN = W7 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_ACBIAS; + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled +} + +/**************************************** + * Routine: muxSetupCamera (ostboot) + * Description: Setup camera muxing + *****************************************/ +void muxSetupCamera(void) +{ + volatile unsigned char *MuxConfigReg; + + /* CAMERA_RSTZ pin configuration, PIN = Y16 */ + /* CAM_RST is connected through the I2C IO expander.*/ + /* MuxConfigReg = (volatile unsigned char *), CONTROL_PADCONF_SYS_NRESWARM*/ + /* *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled */ + + /* CAMERA_XCLK pin configuration, PIN = U3 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_XCLK; + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* CAMERA_LCLK pin configuration, PIN = V5 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_LCLK; + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* CAMERA_VSYNC pin configuration, PIN = U2 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_VS, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* CAMERA_HSYNC pin configuration, PIN = T3 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_HS, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* CAMERA_DAT0 pin configuration, PIN = T4 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D0, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* CAMERA_DAT1 pin configuration, PIN = V2 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D1, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* CAMERA_DAT2 pin configuration, PIN = V3 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D2, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* CAMERA_DAT3 pin configuration, PIN = U4 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D3, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* CAMERA_DAT4 pin configuration, PIN = W2 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D4, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* CAMERA_DAT5 pin configuration, PIN = V4 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D5, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* CAMERA_DAT6 pin configuration, PIN = W3 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D6, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* CAMERA_DAT7 pin configuration, PIN = Y2 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D7, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* CAMERA_DAT8 pin configuration, PIN = Y4 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D8, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* CAMERA_DAT9 pin configuration, PIN = V6 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D9, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled +} + +/**************************************** + * Routine: muxSetupMMCSD (ostboot) + * Description: set up MMC muxing + *****************************************/ +void muxSetupMMCSD(void) +{ + volatile unsigned char *MuxConfigReg; + + /* SDMMC_CLKI pin configuration, PIN = H15 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKI, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* SDMMC_CLKO pin configuration, PIN = G19 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKO, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* SDMMC_CMD pin configuration, PIN = H18 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + // External pull-ups are present. + // *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU + + /* SDMMC_DAT0 pin configuration, PIN = F20 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT0, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + // External pull-ups are present. + // *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU + + /* SDMMC_DAT1 pin configuration, PIN = H14 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT1, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + // External pull-ups are present. + // *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU + + /* SDMMC_DAT2 pin configuration, PIN = E19 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT2, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + // External pull-ups are present. + // *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU + + /* SDMMC_DAT3 pin configuration, PIN = D19 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT3, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + // External pull-ups are present. + // *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU + + /* SDMMC_DDIR0 pin configuration, PIN = F19 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR0, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* SDMMC_DDIR1 pin configuration, PIN = E20 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR1, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* SDMMC_DDIR2 pin configuration, PIN = F18 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR2, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* SDMMC_DDIR3 pin configuration, PIN = E18 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR3, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* SDMMC_CDIR pin configuration, PIN = G18 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD_DIR, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* MMC_CD pin configuration, PIN = B3 ---2420IP ONLY---*/ + /* MMC_CD for 2422IP=K1 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SDRC_A14, + *MuxConfigReg = 0x03 ; // Mode = 3, PUPD=Disabled + + /* MMC_WP pin configuration, PIN = B4 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SDRC_A13, + *MuxConfigReg = 0x03 ; // Mode = 3, PUPD=Disabled +} + +/****************************************** + * Routine: muxSetupTouchScreen (ostboot) + * Description: Set up touch screen muxing + *******************************************/ +void muxSetupTouchScreen(void) +{ + volatile unsigned char *MuxConfigReg; + + /* SPI1_CLK pin configuration, PIN = U18 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_CLK, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* SPI1_MOSI pin configuration, PIN = V20 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SIMO, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* SPI1_MISO pin configuration, PIN = T18 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SOMI, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* SPI1_nCS0 pin configuration, PIN = U19 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_NCS0, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled + + /* PEN_IRQ pin configuration, PIN = P20 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MCBSP1_FSR, + *MuxConfigReg = 0x03 ; // Mode = 3, PUPD=Disabled +} + +/**************************************** + * Routine: muxSetupHDQ (ostboot) + * Description: setup 1wire mux + *****************************************/ +void muxSetupHDQ(void) +{ + volatile unsigned char *MuxConfigReg; + + /* HDQ_SIO pin configuration, PIN = N18 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_HDQ_SIO, + *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled +} + +/*************************************************************** + * Routine: muxSetupGPMC (ostboot) + * Description: Configures balls which cam up in protected mode + ***************************************************************/ +void muxSetupGPMC(void) +{ + volatile uint8 *MuxConfigReg; + volatile unsigned int *MCR = 0x4800008C; + + /* gpmc_io_dir */ + *MCR = 0x19000000; + + /* NOR FLASH CS0 */ + /* signal - Gpmc_clk; pin - J4; offset - 0x0088; mode - 0; Byte-3 Pull/up - N/A */ + MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_D2_BYTE3, + *MuxConfigReg = 0x00 ; + + /* signal - Gpmc_iodir; pin - n2; offset - 0x008C; mode - 1; Byte-3 Pull/up - N/A */ + MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE3, + *MuxConfigReg = 0x01 ; + + /* MPDB(Multi Port Debug Port) CS1 */ + /* signal - gpmc_ncs1; pin - N8; offset - 0x008C; mode - 0; Byte-1 Pull/up - N/A */ + MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE1, + *MuxConfigReg = 0x00 ; + + /* signal - Gpmc_ncs2; pin - E2; offset - 0x008C; mode - 0; Byte-2 Pull/up - N/A */ + MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE2, + *MuxConfigReg = 0x00 ; + + +} + +/**************************************************************** + * Routine: muxSetupSDRC (ostboot) + * Description: Configures balls which come up in protected mode + ****************************************************************/ +void muxSetupSDRC(void) +{ + volatile uint8 *MuxConfigReg; + + /* signal - sdrc_ncs1; pin - C12; offset - 0x00A0; mode - 0; Byte-1 Pull/up - N/A */ + MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_NCS0_BYTE1, + *MuxConfigReg = 0x00 ; + + /* signal - sdrc_a12; pin - D11; offset - 0x0030; mode - 0; Byte-2 Pull/up - N/A */ + MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_A14_BYTE2, + *MuxConfigReg = 0x00 ; + + /* signal - sdrc_cke1; pin - B13; offset - 0x00A0; mode - 0; Byte-3 Pull/up - N/A */ + MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_NCS0_BYTE3, + *MuxConfigReg = 0x00; + + if (get_cpu_type() == CPU_2422) { + MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_A14_BYTE0, + *MuxConfigReg = 0x1b; + } +} + +/***************************************************************************** + * Routine: update_mux() + * Description: Update balls which are different beween boards. All should be + * updated to match functionaly. However, I'm only updating ones + * which I'll be using for now. When power comes into play they + * all need updating. + *****************************************************************************/ +void update_mux(u32 btype,u32 mtype) +{ + u32 cpu, base = OMAP2420_CTRL_BASE; + cpu = get_cpu_type(); + + if (btype == BOARD_H4_MENELAUS) { + if (cpu == CPU_2420) { + /* PIN = B3, GPIO.0->KBR5, mode 3, (pun?),-DO-*/ + __raw_writeb(0x3, base+0x30); + /* PIN = B13, GPIO.38->KBC6, mode 3, (pun?)-DO-*/ + __raw_writeb(0x3, base+0xa3); + /* PIN = F1, GPIO.25->HSUSBxx mode 3, (for external HS USB)*/ + /* PIN = H1, GPIO.26->HSUSBxx mode 3, (for external HS USB)*/ + /* PIN = K1, GPMC_ncs6 mode 0, (on board nand access)*/ + /* PIN = L2, GPMC_ncs67 mode 0, (for external HS USB)*/ + /* PIN = M1 (HSUSBOTG) */ + /* PIN = P1, GPIO.35->MEN_POK mode 3, (menelaus powerok)-DO-*/ + __raw_writeb(0x3, base+0x9d); + /* PIN = U32, (WLAN_CLKREQ) */ + /* PIN = Y11, WLAN */ + /* PIN = AA4, GPIO.15->KBC2, mode 3, -DO- */ + __raw_writeb(0x3, base+0xe7); + /* PIN = AA8, mDOC */ + /* PIN = AA10, BT */ + /* PIN = AA13, WLAN */ + /* PIN = M18 GPIO.96->MMC2_WP mode 3 -DO- */ + __raw_writeb(0x3, base+0x10e); + /* PIN = N19 GPIO.98->WLAN_INT mode 3 -DO- */ + __raw_writeb(0x3, base+0x110); + /* PIN = J15 HHUSB */ + /* PIN = H19 HSUSB */ + /* PIN = W13, P13, R13, W16 ... */ + /* PIN = V12 GPIO.25->I2C_CAMEN mode 3 -DO- */ + __raw_writeb(0x3, base+0xde); + /* PIN = W19 sys_nirq->MENELAUS_INT mode 0 -DO- */ + __raw_writeb(0x0, base+0x12c); + /* PIN = AA17->sys_clkreq mode 0 -DO- */ + __raw_writeb(0x0, base+0x136); + } else if (cpu == CPU_2422) { + /* PIN = B3, GPIO.0->nc, mode 3, set above (pun?)*/ + /* PIN = B13, GPIO.cke1->nc, mode 0, set above, (pun?)*/ + /* PIN = F1, GPIO.25->HSUSBxx mode 3, (for external HS USB)*/ + /* PIN = H1, GPIO.26->HSUSBxx mode 3, (for external HS USB)*/ + /* PIN = K1, GPMC_ncs6 mode 0, (on board nand access)*/ + __raw_writeb(0x0, base+0x92); + /* PIN = L2, GPMC_ncs67 mode 0, (for external HS USB)*/ + /* PIN = M1 (HSUSBOTG) */ + /* PIN = P1, GPIO.35->MEN_POK mode 3, (menelaus powerok)-DO-*/ + __raw_writeb(0x3, base+0x10c); + /* PIN = U32, (WLAN_CLKREQ) */ + /* PIN = AA4, GPIO.15->KBC2, mode 3, -DO- */ + __raw_writeb(0x3, base+0x30); + /* PIN = AA8, mDOC */ + /* PIN = AA10, BT */ + /* PIN = AA12, WLAN */ + /* PIN = M18 GPIO.96->MMC2_WP mode 3 -DO- */ + __raw_writeb(0x3, base+0x10e); + /* PIN = N19 GPIO.98->WLAN_INT mode 3 -DO- */ + __raw_writeb(0x3, base+0x110); + /* PIN = J15 HHUSB */ + /* PIN = H19 HSUSB */ + /* PIN = W13, P13, R13, W16 ... */ + /* PIN = V12 GPIO.25->I2C_CAMEN mode 3 -DO- */ + __raw_writeb(0x3, base+0xde); + /* PIN = W19 sys_nirq->MENELAUS_INT mode 0 -DO- */ + __raw_writeb(0x0, base+0x12c); + /* PIN = AA17->sys_clkreq mode 0 -DO- */ + __raw_writeb(0x0, base+0x136); + } + + } else if (btype == BOARD_H4_SDP) { + if (cpu == CPU_2420) { + /* PIN = B3, GPIO.0->nc mode 3, set above (pun?)*/ + /* PIN = B13, GPIO.cke1->nc, mode 0, set above, (pun?)*/ + /* Pin = Y11 VLNQ */ + /* Pin = AA4 VLNQ */ + /* Pin = AA6 VLNQ */ + /* Pin = AA8 VLNQ */ + /* Pin = AA10 VLNQ */ + /* Pin = AA12 VLNQ */ + /* PIN = M18 GPIO.96->KBR5 mode 3 -DO- */ + __raw_writeb(0x3, base+0x10e); + /* PIN = N19 GPIO.98->KBC6 mode 3 -DO- */ + __raw_writeb(0x3, base+0x110); + /* PIN = J15 MDOC_nDMAREQ */ + /* PIN = H19 GPIO.100->KBC2 mode 3 -DO- */ + __raw_writeb(0x3, base+0x114); + /* PIN = W13, V12, P13, R13, W19, W16 ... */ + /* PIN = AA17 sys_clkreq->bt_clk_req mode 0 */ + } else if (cpu == CPU_2422) { + /* PIN = B3, GPIO.0->MMC_CD, mode 3, set above */ + /* PIN = B13, GPIO.38->wlan_int, mode 3, (pun?)*/ + /* Pin = Y11 VLNQ */ + /* Pin = AA4 VLNQ */ + /* Pin = AA6 VLNQ */ + /* Pin = AA8 VLNQ */ + /* Pin = AA10 VLNQ */ + /* Pin = AA12 VLNQ */ + /* PIN = M18 GPIO.96->KBR5 mode 3 -DO- */ + __raw_writeb(0x3, base+0x10e); + /* PIN = N19 GPIO.98->KBC6 mode 3 -DO- */ + __raw_writeb(0x3, base+0x110); + /* PIN = J15 MDOC_nDMAREQ */ + /* PIN = H19 GPIO.100->KBC2 mode 3 -DO- */ + __raw_writeb(0x3, base+0x114); + /* PIN = W13, V12, P13, R13, W19, W16 ... */ + /* PIN = AA17 sys_clkreq->bt_clk_req mode 0 */ + } + } +} + + diff --git a/board/omap2420h4/platform.S b/board/omap2420h4/platform.S new file mode 100644 index 0000000000..3728e846cd --- /dev/null +++ b/board/omap2420h4/platform.S @@ -0,0 +1,237 @@ +/* + * Board specific setup info + * + * (C) Copyright 2004 + * Texas Instruments, + * Richard Woodruff + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +_TEXT_BASE: + .word TEXT_BASE /* sdram load addr from config.mk */ + +#ifdef CONFIG_PARTIAL_SRAM + +/************************************************************************** + * cpy_clk_code: relocates clock code into SRAM where its safer to execute + * R1 = SRAM destination address. + *************************************************************************/ +.global cpy_clk_code + cpy_clk_code: + /* Copy DPLL code into SRAM */ + adr r0, go_to_speed /* get addr of clock setting code */ + mov r2, #384 /* r2 size to copy (div by 32 bytes) */ + mov r1, r1 /* r1 <- dest address (passed in) */ + add r2, r2, r0 /* r2 <- source end address */ +next2: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end address [r2] */ + bne next2 + mov pc, lr /* back to caller */ + +/* **************************************************************************** + * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed + * -executed from SRAM. + * R0 = PRCM_CLKCFG_CTRL - addr of valid reg + * R1 = CM_CLKEN_PLL - addr dpll ctlr reg + * R2 = dpll value + * R3 = CM_IDLEST_CKGEN - addr dpll lock wait + ******************************************************************************/ +.global go_to_speed + go_to_speed: + sub sp, sp, #0x4 /* get some stack space */ + str r4, [sp] /* save r4's value */ + + /* move into fast relock bypass */ + ldr r8, pll_ctl_add + mov r4, #0x2 + str r4, [r8] + ldr r4, pll_stat +block: + ldr r8, [r4] /* wait for bypass to take effect */ + and r8, r8, #0x3 + cmp r8, #0x1 + bne block + + /* set new dpll dividers _after_ in bypass */ + ldr r4, pll_div_add + ldr r8, pll_div_val + str r8, [r4] + + /* now prepare GPMC (flash) for new dpll speed */ + /* flash needs to be stable when we jump back to it */ + ldr r4, cfg3_0_addr + ldr r8, cfg3_0_val + str r8, [r4] + ldr r4, cfg4_0_addr + ldr r8, cfg4_0_val + str r8, [r4] + ldr r4, cfg1_0_addr + ldr r8, [r4] + orr r8, r8, #0x3 /* up gpmc divider */ + str r8, [r4] + + /* setup to 2x loop though code. The first loop pre-loads the + * icache, the 2nd commits the prcm config, and locks the dpll + */ + mov r4, #0x1000 /* spin spin spin */ + mov r8, #0x4 /* first pass condition & set registers */ + cmp r8, #0x4 +2: + ldrne r8, [r3] /* DPLL lock check */ + and r8, r8, #0x7 + cmp r8, #0x2 + beq 4f +3: + subeq r8, r8, #0x1 + streq r8, [r0] /* commit dividers (2nd time) */ + nop +lloop1: + sub r4, r4, #0x1 /* Loop currently necessary else bad jumps */ + nop + cmp r4, #0x0 + bne lloop1 + mov r4, #0x40000 + cmp r8, #0x1 + nop + streq r2, [r1] /* lock dpll (2nd time) */ + nop +lloop2: + sub r4, r4, #0x1 /* loop currently necessary else bad jumps */ + nop + cmp r4, #0x0 + bne lloop2 + mov r4, #0x40000 + cmp r8, #0x1 + nop + ldreq r8, [r3] /* get lock condition for dpll */ + cmp r8, #0x4 /* first time though? */ + bne 2b + moveq r8, #0x2 /* set to dpll check condition. */ + beq 3b /* if condition not true branch */ +4: + ldr r4, [sp] + add sp, sp, #0x4 /* return stack space */ + mov pc, lr /* back to caller, locked */ + +_go_to_speed: .word go_to_speed + +/* these constants need to be close for PIC code */ +cfg3_0_addr: + .word GPMC_CONFIG3_0 +cfg3_0_val: + .word H4_24XX_GPMC_CONFIG3_0 +cfg4_0_addr: + .word GPMC_CONFIG4_0 +cfg4_0_val: + .word H4_24XX_GPMC_CONFIG4_0 +cfg1_0_addr: + .word GPMC_CONFIG1_0 +pll_ctl_add: + .word CM_CLKEN_PLL +pll_stat: + .word CM_IDLEST_CKGEN +pll_div_add: + .word CM_CLKSEL1_PLL +pll_div_val: + .word DPLL_VAL /* DPLL setting (300MHz default) */ +#endif + +.globl platformsetup +platformsetup: + mov r3, r0 /* save skip information */ +#ifdef CONFIG_APTIX + ldr r0, REG_SDRC_MCFG_0 + ldr r1, VAL_SDRC_MCFG_0 + str r1, [r0] + ldr r0, REG_SDRC_MR_0 + ldr r1, VAL_SDRC_MR_0 + str r1, [r0] + /* a ddr needs emr1 set here */ + ldr r0, REG_SDRC_SHARING + ldr r1, VAL_SDRC_SHARING + str r1, [r0] + ldr r0, REG_SDRC_RFR_CTRL_0 + ldr r1, VAL_SDRC_RFR_CTRL_0 + str r1, [r0] + + /* little delay after init */ + mov r2, #0x1800 +1: + subs r2, r2, #0x1 + bne 1b +#endif +#ifdef CONFIG_PARTIAL_SRAM + ldr sp, SRAM_STACK + str ip, [sp] /* stash old link register */ + mov ip, lr /* save link reg across call */ + mov r0, r3 /* pass skip info to s_init */ + bl s_init /* go setup pll,mux,memory */ + ldr ip, [sp] /* restore save ip */ + mov lr, ip /* restore link reg */ +#endif + /* map interrupt controller */ + ldr r0, VAL_INTH_SETUP + mcr p15, 0, r0, c15, c2, 4 + + /* back to arch calling code */ + mov pc, lr + + /* the literal pools origin */ + .ltorg + +REG_CONTROL_STATUS: + .word CONTROL_STATUS +VAL_INTH_SETUP: + .word PERIFERAL_PORT_BASE +SRAM_STACK: + .word LOW_LEVEL_SRAM_STACK + +#ifdef CONFIG_APTIX +REG_SDRC_SHARING: + .word SDRC_SHARING +REG_SDRC_MCFG_0: + .word SDRC_MCFG_0 +REG_SDRC_MR_0: + .word SDRC_MR_0 +REG_SDRC_RFR_CTRL_0: + .word SDRC_RFR_CTRL +VAL_SDRC_SHARING: + .word VAL_H4_SDRC_SHARING +VAL_SDRC_MCFG_0: + .word VAL_H4_SDRC_MCFG_0 +VAL_SDRC_MR_0: + .word VAL_H4_SDRC_MR_0 +VAL_SDRC_RFR_CTRL_0: + .word VAL_H4_SDRC_RFR_CTRL_0 +#endif + + + + + + diff --git a/board/omap2420h4/sys_info.c b/board/omap2420h4/sys_info.c new file mode 100644 index 0000000000..b5fe9e3925 --- /dev/null +++ b/board/omap2420h4/sys_info.c @@ -0,0 +1,202 @@ +/* + * (C) Copyright 2004 + * Texas Instruments, + * Richard Woodruff + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include /* get mem tables */ +#include +#include +#include + +/************************************************************************** + * get_cpu_type() - low level get cpu type + * - no C globals yet. + * - just looking to say if this is a 2422 or 2420 or ... + * - to start with we will look at switch settings.. + * - 2422 id's same as 2420 for ES1 will rely on H4 board characteristics + * (mux for 2420, non-mux for 2422). + ***************************************************************************/ +u32 get_cpu_type(void) +{ + u32 v; + + v = __raw_readl(TAP_IDCODE_REG); + v &= CPU_24XX_ID_MASK; + if (v == CPU_2420_CHIPID) { /* currently 2420 and 2422 have same id */ + if (is_gpmc_muxed() == GPMC_MUXED) /* if mux'ed */ + return(CPU_2420); + else + return(CPU_2422); + } else + return(CPU_2420); /* don't know, say 2420 */ +} + +/****************************************** + * get_cpu_rev(void) - extract version info + ******************************************/ +u32 get_cpu_rev(void) +{ + u32 v; + v = __raw_readl(TAP_IDCODE_REG); + v = v >> 28; + return(v+1); /* currently 2422 and 2420 match up */ +} + +/*********************************************************** + * get_mem_type() - identify type of mDDR part used. + * 2422 uses stacked DDR, 2 parts CS0/CS1. + * 2420 may have 1 or 2, no good way to know...only init 1... + * when eeprom data is up we can select 1 more. + *************************************************************/ +u32 get_mem_type(void) +{ + if (get_cpu_type() == CPU_2422) + return(DDR_STACKED); + + if (get_board_type() == BOARD_H4_MENELAUS) + return(DDR_COMBO); + else + return(DDR_DISCRETE); +} + +/*********************************************************************** + * get_board_type() - get board type based on current production stats. + * --- NOTE: 2 I2C EEPROMs will someday be populated with proper info. + * when they are available we can get info from there. This should + * be correct of all known boards up until today. + ************************************************************************/ +u32 get_board_type(void) +{ + if (i2c_probe(I2C_MENELAUS) == 0) + return(BOARD_H4_MENELAUS); + else + return(BOARD_H4_SDP); +} + +/****************************************************************** + * get_sysboot_value() - get init word settings (dip switch on h4) + ******************************************************************/ +u32 get_sysboot_value(void) +{ + return(0x00000FFF & __raw_readl(CONTROL_STATUS)); +} + +/*************************************************************************** + * get_gpmc0_base() - Return current address hardware will be + * fetching from. The below effectively gives what is correct, its a bit + * mis-leading compared to the TRM. For the most general case the mask + * needs to be also taken into account this does work in practice. + * - for u-boot we currently map: + * -- 0 to nothing, + * -- 4 to flash + * -- 8 to enent + * -- c to wifi + ****************************************************************************/ +u32 get_gpmc0_base(void) +{ + u32 b; + + b = __raw_readl(GPMC_CONFIG7_0); + b &= 0x1F; /* keep base [5:0] */ + b = b << 24; /* ret 0x0b000000 */ + return(b); +} + +/***************************************************************** + * is_gpmc_muxed() - tells if address/data lines are multiplexed + *****************************************************************/ +u32 is_gpmc_muxed(void) +{ + u32 mux; + mux = get_sysboot_value(); + if (mux & BIT1) /* if mux'ed */ + return(GPMC_MUXED); + else + return(GPMC_NONMUXED); +} + +/************************************************************************ + * get_gpmc0_type() - read sysboot lines to see type of memory attached + ************************************************************************/ +u32 get_gpmc0_type(void) +{ + u32 type; + type = get_sysboot_value(); + if ((type & (BIT3|BIT2)) == (BIT3|BIT2)) + return(TYPE_NAND); + else + return(TYPE_NOR); +} + +/******************************************************************* + * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand) + *******************************************************************/ +u32 get_gpmc0_width(void) +{ + u32 width; + width = get_sysboot_value(); + if ((width & 0xF) == (BIT3|BIT2)) + return(WIDTH_8BIT); + else + return(WIDTH_16BIT); +} + +/********************************************************************* + * wait_on_value() - common routine to allow waiting for changes in + * volatile regs. + *********************************************************************/ +u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound) +{ + u32 i = 0, val; + do { + ++i; + val = __raw_readl(read_addr) & read_bit_mask; + if (val == match_value) + return(1); + if (i==bound) + return(0); + } while (1); +} + +/********************************************************************* + * display_board_info() - print banner with board info. + *********************************************************************/ +void display_board_info(u32 btype) +{ + char cpu_2420[] = "2420"; + char cpu_2422[] = "2422"; + char db_men[] = "Menelaus"; + char db_ip[]= "IP"; + char *cpu_s, *db_s; + u32 cpu = get_cpu_type(); + + if(cpu == CPU_2420) + cpu_s = cpu_2420; + else + cpu_s = cpu_2422; + if(btype == BOARD_H4_MENELAUS) + db_s = db_men; + else + db_s = db_ip; + printf("TI H4 SDP Base Board with OMAP%s %s Daughter Board\n",cpu_s, db_s); +} diff --git a/board/omap2420h4/u-boot.lds b/board/omap2420h4/u-boot.lds new file mode 100644 index 0000000000..724c1dd48a --- /dev/null +++ b/board/omap2420h4/u-boot.lds @@ -0,0 +1,58 @@ +/* + * January 2004 - Changed to support H4 device + * Copyright (c) 2004 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm1136/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/common/env_flash.c b/common/env_flash.c index 4e42c8fee5..d6257d07bd 100644 --- a/common/env_flash.c +++ b/common/env_flash.c @@ -99,11 +99,7 @@ uchar env_get_char_spec (int index) int env_init(void) { DECLARE_GLOBAL_DATA_PTR; - - int crc1_ok = - (crc32(0, flash_addr->data, ENV_SIZE) == flash_addr->crc); - int crc2_ok = - (crc32(0, flash_addr_new->data, ENV_SIZE) == flash_addr_new->crc); + int crc1_ok = 0, crc2_ok = 0; uchar flag1 = flash_addr->flags; uchar flag2 = flash_addr_new->flags; @@ -112,6 +108,16 @@ int env_init(void) ulong addr1 = (ulong)&(flash_addr->data); ulong addr2 = (ulong)&(flash_addr_new->data); +#ifdef CONFIG_OMAP2420H4 + int flash_probe(void); + + if(flash_probe() == 0) + goto bad_flash; +#endif + + crc1_ok = (crc32(0, flash_addr->data, ENV_SIZE) == flash_addr->crc); + crc2_ok = (crc32(0, flash_addr_new->data, ENV_SIZE) == flash_addr_new->crc); + if (crc1_ok && ! crc2_ok) { gd->env_addr = addr1; gd->env_valid = 1; @@ -138,6 +144,9 @@ int env_init(void) gd->env_valid = 2; } +#ifdef CONFIG_OMAP2420H4 +bad_flash: +#endif return (0); } @@ -252,15 +261,22 @@ Done: int env_init(void) { DECLARE_GLOBAL_DATA_PTR; +#ifdef CONFIG_OMAP2420H4 + int flash_probe(void); + if(flash_probe() == 0) + goto bad_flash; +#endif if (crc32(0, env_ptr->data, ENV_SIZE) == env_ptr->crc) { gd->env_addr = (ulong)&(env_ptr->data); gd->env_valid = 1; - } else { - gd->env_addr = (ulong)&default_environment[0]; - gd->env_valid = 0; + return(0); } - +#ifdef CONFIG_OMAP2420H4 +bad_flash: +#endif + gd->env_addr = (ulong)&default_environment[0]; + gd->env_valid = 0; return (0); } diff --git a/cpu/arm1136/Makefile b/cpu/arm1136/Makefile new file mode 100644 index 0000000000..203278e9cf --- /dev/null +++ b/cpu/arm1136/Makefile @@ -0,0 +1,43 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(CPU).a + +START = start.o +OBJS = interrupts.o cpu.o + +all: .depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(AR) crv $@ $(OBJS) + +######################################################################### + +.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/cpu/arm1136/config.mk b/cpu/arm1136/config.mk new file mode 100644 index 0000000000..077514aa26 --- /dev/null +++ b/cpu/arm1136/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \ + +PLATFORM_CPPFLAGS += -mapcs-32 -march=armv6 diff --git a/cpu/arm1136/cpu.c b/cpu/arm1136/cpu.c new file mode 100644 index 0000000000..0db2753359 --- /dev/null +++ b/cpu/arm1136/cpu.c @@ -0,0 +1,163 @@ +/* + * (C) Copyright 2004 Texas Insturments + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * CPU specific code + */ + +#include +#include +#include + +/* read co-processor 15, register #1 (control register) */ +static unsigned long read_p15_c1 (void) +{ + unsigned long value; + + __asm__ __volatile__( + "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n" + : "=r" (value) + : + : "memory"); + return value; +} + +/* write to co-processor 15, register #1 (control register) */ +static void write_p15_c1 (unsigned long value) +{ + __asm__ __volatile__( + "mcr p15, 0, %0, c1, c0, 0 @ write it back\n" + : + : "r" (value) + : "memory"); + + read_p15_c1 (); +} + +static void cp_delay (void) +{ + volatile int i; + + /* Many OMAP regs need at least 2 nops */ + for (i = 0; i < 100; i++); +} + +/* See also ARM Ref. Man. */ +#define C1_MMU (1<<0) /* mmu off/on */ +#define C1_ALIGN (1<<1) /* alignment faults off/on */ +#define C1_DC (1<<2) /* dcache off/on */ +#define C1_WB (1<<3) /* merging write buffer on/off */ +#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */ +#define C1_SYS_PROT (1<<8) /* system protection */ +#define C1_ROM_PROT (1<<9) /* ROM protection */ +#define C1_IC (1<<12) /* icache off/on */ +#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */ +#define RESERVED_1 (0xf << 3) /* must be 111b for R/W */ + +int cpu_init (void) +{ + /* + * setup up stacks if necessary + */ +#ifdef CONFIG_USE_IRQ + DECLARE_GLOBAL_DATA_PTR; + + IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4; + FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ; +#endif + return 0; +} + +int cleanup_before_linux (void) +{ + /* + * this function is called just before we call linux + * it prepares the processor for linux + * + * we turn off caches etc ... + */ + + unsigned long i; + + disable_interrupts (); + +#ifdef CONFIG_LCD + { + extern void lcd_disable(void); + extern void lcd_panel_disable(void); + + lcd_disable(); /* proper disable of lcd & panel */ + lcd_panel_disable(); + } +#endif + + /* turn off I/D-cache */ + asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i)); + i &= ~(C1_DC | C1_IC); + asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i)); + + /* flush I/D-cache */ + i = 0; + asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i)); // invalidate both caches and flush btb + asm ("mcr p15, 0, %0, c7, c10, 4": :"r" (i)); // mem barrier to sync things + return(0); +} + +int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + extern void reset_cpu (ulong addr); + + disable_interrupts (); + reset_cpu (0); + /*NOTREACHED*/ + return(0); +} + +void icache_enable (void) +{ + ulong reg; + + reg = read_p15_c1 (); /* get control reg. */ + cp_delay (); + write_p15_c1 (reg | C1_IC); +} + +void icache_disable (void) +{ + ulong reg; + + reg = read_p15_c1 (); + cp_delay (); + write_p15_c1 (reg & ~C1_IC); +} + +int icache_status (void) +{ + return(read_p15_c1 () & C1_IC) != 0; +} diff --git a/cpu/arm1136/interrupts.c b/cpu/arm1136/interrupts.c new file mode 100644 index 0000000000..bd7bb7c341 --- /dev/null +++ b/cpu/arm1136/interrupts.c @@ -0,0 +1,293 @@ +/* + * (C) Copyright 2004 + * Texas Instruments + * Richard Woodruff + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Alex Zuepke + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +extern void reset_cpu(ulong addr); +#define TIMER_LOAD_VAL 0 + +/* macro to read the 32 bit timer */ +#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+TCRR)) + +#ifdef CONFIG_USE_IRQ +/* enable IRQ interrupts */ +void enable_interrupts (void) +{ + unsigned long temp; + __asm__ __volatile__("mrs %0, cpsr\n" + "bic %0, %0, #0x80\n" + "msr cpsr_c, %0" + : "=r" (temp) + : + : "memory"); +} + +/* + * disable IRQ/FIQ interrupts + * returns true if interrupts had been enabled before we disabled them + */ +int disable_interrupts (void) +{ + unsigned long old,temp; + __asm__ __volatile__("mrs %0, cpsr\n" + "orr %1, %0, #0xc0\n" + "msr cpsr_c, %1" + : "=r" (old), "=r" (temp) + : + : "memory"); + return(old & 0x80) == 0; +} +#else +void enable_interrupts (void) +{ + return; +} +int disable_interrupts (void) +{ + return 0; +} +#endif + + +void bad_mode (void) +{ + panic ("Resetting CPU ...\n"); + reset_cpu (0); +} + +void show_regs (struct pt_regs *regs) +{ + unsigned long flags; + const char *processor_modes[] = { + "USER_26", "FIQ_26", "IRQ_26", "SVC_26", + "UK4_26", "UK5_26", "UK6_26", "UK7_26", + "UK8_26", "UK9_26", "UK10_26", "UK11_26", + "UK12_26", "UK13_26", "UK14_26", "UK15_26", + "USER_32", "FIQ_32", "IRQ_32", "SVC_32", + "UK4_32", "UK5_32", "UK6_32", "ABT_32", + "UK8_32", "UK9_32", "UK10_32", "UND_32", + "UK12_32", "UK13_32", "UK14_32", "SYS_32", + }; + + flags = condition_codes (regs); + + printf ("pc : [<%08lx>] lr : [<%08lx>]\n" + "sp : %08lx ip : %08lx fp : %08lx\n", + instruction_pointer (regs), + regs->ARM_lr, regs->ARM_sp, regs->ARM_ip, regs->ARM_fp); + printf ("r10: %08lx r9 : %08lx r8 : %08lx\n", + regs->ARM_r10, regs->ARM_r9, regs->ARM_r8); + printf ("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n", + regs->ARM_r7, regs->ARM_r6, regs->ARM_r5, regs->ARM_r4); + printf ("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n", + regs->ARM_r3, regs->ARM_r2, regs->ARM_r1, regs->ARM_r0); + printf ("Flags: %c%c%c%c", + flags & CC_N_BIT ? 'N' : 'n', + flags & CC_Z_BIT ? 'Z' : 'z', + flags & CC_C_BIT ? 'C' : 'c', flags & CC_V_BIT ? 'V' : 'v'); + printf (" IRQs %s FIQs %s Mode %s%s\n", + interrupts_enabled (regs) ? "on" : "off", + fast_interrupts_enabled (regs) ? "on" : "off", + processor_modes[processor_mode (regs)], + thumb_mode (regs) ? " (T)" : ""); +} + +void do_undefined_instruction (struct pt_regs *pt_regs) +{ + printf ("undefined instruction\n"); + show_regs (pt_regs); + bad_mode (); +} + +void do_software_interrupt (struct pt_regs *pt_regs) +{ + printf ("software interrupt\n"); + show_regs (pt_regs); + bad_mode (); +} + +void do_prefetch_abort (struct pt_regs *pt_regs) +{ + printf ("prefetch abort\n"); + show_regs (pt_regs); + bad_mode (); +} + +void do_data_abort (struct pt_regs *pt_regs) +{ + printf ("data abort\n"); + show_regs (pt_regs); + bad_mode (); +} + +void do_not_used (struct pt_regs *pt_regs) +{ + printf ("not used\n"); + show_regs (pt_regs); + bad_mode (); +} + +void do_fiq (struct pt_regs *pt_regs) +{ + printf ("fast interrupt request\n"); + show_regs (pt_regs); + bad_mode (); +} + +void do_irq (struct pt_regs *pt_regs) +{ + printf ("interrupt request\n"); + show_regs (pt_regs); + bad_mode (); +} + +static ulong timestamp; +static ulong lastinc; + +/* nothing really to do with interrupts, just starts up a counter. */ +int interrupt_init (void) +{ + int32_t val; + + /* Start the counter ticking up */ + *((int32_t *) (CFG_TIMERBASE + TLDR)) = TIMER_LOAD_VAL; /* reload value on overflow*/ + val = (CFG_PVT << 2) | BIT5 | BIT1 | BIT0; /* mask to enable timer*/ + *((int32_t *) (CFG_TIMERBASE + TCLR)) = val; /* start timer */ + + reset_timer_masked(); /* init the timestamp and lastinc value */ + + return(0); +} + +/* + * timer without interrupts + */ +void reset_timer (void) +{ + reset_timer_masked (); +} + +ulong get_timer (ulong base) +{ + return get_timer_masked () - base; +} + +void set_timer (ulong t) +{ + timestamp = t; +} + +/* delay x useconds AND perserve advance timstamp value */ +void udelay (unsigned long usec) +{ + ulong tmo, tmp; + + if (usec >= 1000) { /* if "big" number, spread normalization to seconds */ + tmo = usec / 1000; /* start to normalize for usec to ticks per sec */ + tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */ + tmo /= 1000; /* finish normalize. */ + } else { /* else small number, don't kill it prior to HZ multiply */ + tmo = usec * CFG_HZ; + tmo /= (1000*1000); + } + + tmp = get_timer (0); /* get current timestamp */ + if ( (tmo + tmp + 1) < tmp )/* if setting this forward will roll time stamp */ + reset_timer_masked (); /* reset "advancing" timestamp to 0, set lastinc value */ + else + tmo += tmp; /* else, set advancing stamp wake up time */ + while (get_timer_masked () < tmo)/* loop till event */ + /*NOP*/; +} + +void reset_timer_masked (void) +{ + /* reset time */ + lastinc = READ_TIMER; /* capture current incrementer value time */ + timestamp = 0; /* start "advancing" time stamp from 0 */ +} + +ulong get_timer_masked (void) +{ + ulong now = READ_TIMER; /* current tick value */ + + if (now >= lastinc) /* normal mode (non roll) */ + timestamp += (now - lastinc); /* move stamp fordward with absoulte diff ticks */ + else /* we have rollover of incrementer */ + timestamp += (0xFFFFFFFF - lastinc) + now; + lastinc = now; + return timestamp; +} + +/* waits specified delay value and resets timestamp */ +void udelay_masked (unsigned long usec) +{ + ulong tmo; + + if (usec >= 1000) { /* if "big" number, spread normalization to seconds */ + tmo = usec / 1000; /* start to normalize for usec to ticks per sec */ + tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */ + tmo /= 1000; /* finish normalize. */ + } else { /* else small number, don't kill it prior to HZ multiply */ + tmo = usec * CFG_HZ; + tmo /= (1000*1000); + } + reset_timer_masked (); /* set "advancing" timestamp to 0, set lastinc vaule */ + while (get_timer_masked () < tmo) /* wait for time stamp to overtake tick number.*/ + /* NOP */; +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk (void) +{ + ulong tbclk; + tbclk = CFG_HZ; + return tbclk; +} diff --git a/cpu/arm1136/start.S b/cpu/arm1136/start.S new file mode 100644 index 0000000000..826c27e13c --- /dev/null +++ b/cpu/arm1136/start.S @@ -0,0 +1,414 @@ +/* + * armboot - Startup Code for OMP2420/ARM1136 CPU-core + * + * Copyright (c) 2004 Texas Instruments + * + * Copyright (c) 2001 Marius Gröger + * Copyright (c) 2002 Alex Züpke + * Copyright (c) 2002 Gary Jennejohn + * Copyright (c) 2003 Richard Woodruff + * Copyright (c) 2003 Kshitij + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +.globl _start +_start: b reset + ldr pc, _undefined_instruction + ldr pc, _software_interrupt + ldr pc, _prefetch_abort + ldr pc, _data_abort + ldr pc, _not_used + ldr pc, _irq + ldr pc, _fiq + +_undefined_instruction: .word undefined_instruction +_software_interrupt: .word software_interrupt +_prefetch_abort: .word prefetch_abort +_data_abort: .word data_abort +_not_used: .word not_used +_irq: .word irq +_fiq: .word fiq +_pad: .word 0x12345678 /* now 16*4=64 */ +.global _end_vect +_end_vect: + + .balignl 16,0xdeadbeef +/* + ************************************************************************* + * + * Startup Code (reset vector) + * + * do important init only if we don't start from memory! + * setup Memory and board specific bits prior to relocation. + * relocate armboot to ram + * setup stack + * + ************************************************************************* + */ + +_TEXT_BASE: + .word TEXT_BASE + +.globl _armboot_start +_armboot_start: + .word _start + +/* + * These are defined in the board-specific linker script. + */ +.globl _bss_start +_bss_start: + .word __bss_start + +.globl _bss_end +_bss_end: + .word _end + +#ifdef CONFIG_USE_IRQ +/* IRQ stack memory (calculated at run-time) */ +.globl IRQ_STACK_START +IRQ_STACK_START: + .word 0x0badc0de + +/* IRQ stack memory (calculated at run-time) */ +.globl FIQ_STACK_START +FIQ_STACK_START: + .word 0x0badc0de +#endif + +/* + * the actual reset code + */ + +reset: + /* + * set the cpu to SVC32 mode + */ + mrs r0,cpsr + bic r0,r0,#0x1f + orr r0,r0,#0xd3 + msr cpsr,r0 + +#ifdef CONFIG_OMAP2420H4 + /* Copy vectors to mask ROM indirect addr */ + adr r0, _start /* r0 <- current position of code */ + mov r2, #64 /* r2 <- size to copy */ + add r2, r0, r2 /* r2 <- source end address */ + mov r1, #SRAM_OFFSET0 /* build vect addr */ + mov r3, #SRAM_OFFSET1 + add r1, r1, r3 + mov r3, #SRAM_OFFSET2 + add r1, r1, r3 +next: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end address [r2] */ + bne next /* loop until equal */ +#ifdef CONFIG_PARTIAL_SRAM + bl cpy_clk_code /* put dpll adjust code behind vectors */ +#endif +#endif + /* the mask ROM code should have PLL and others stable */ + bl cpu_init_crit + +relocate: /* relocate U-Boot to RAM */ + adr r0, _start /* r0 <- current position of code */ + ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ + cmp r0, r1 /* don't reloc during debug */ + beq stack_setup + + ldr r2, _armboot_start + ldr r3, _bss_start + sub r2, r3, r2 /* r2 <- size of armboot */ + add r2, r0, r2 /* r2 <- source end address */ + +copy_loop: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end addreee [r2] */ + ble copy_loop + + /* Set up the stack */ +stack_setup: + ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ + sub r0, r0, #CFG_MALLOC_LEN /* malloc area */ + sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */ +#ifdef CONFIG_USE_IRQ + sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) +#endif + sub sp, r0, #12 /* leave 3 words for abort-stack */ + +clear_bss: + ldr r0, _bss_start /* find start of bss segment */ + ldr r1, _bss_end /* stop here */ + mov r2, #0x00000000 /* clear */ + +clbss_l:str r2, [r0] /* clear loop... */ + add r0, r0, #4 + cmp r0, r1 + bne clbss_l + + ldr pc, _start_armboot + +_start_armboot: .word start_armboot + + +/* + ************************************************************************* + * + * CPU_init_critical registers + * + * setup important registers + * setup memory timing + * + ************************************************************************* + */ +cpu_init_crit: + /* + * flush v4 I/D caches + */ + mov r0, #0 + mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ + mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ + + /* + * disable MMU stuff and caches + */ + mrc p15, 0, r0, c1, c0, 0 + bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS) + bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM) + orr r0, r0, #0x00000002 @ set bit 2 (A) Align +#ifndef CONFIG_ICACHE_OFF + orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache +#endif + mcr p15, 0, r0, c1, c0, 0 + + /* + * Jump to board specific initialization... The Mask ROM will have already initialized + * basic memory. Go here to bump up clock rate and handle wake up conditions. + */ + adr r0, _start /* r0 <- current position of code */ + ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ + cmp r0, r1 /* pass on info about skipping some init portions */ + moveq r0,#0x1 /* flag to skip prcm and sdrc setup */ + movne r0,#0x0 + mov ip, lr /* persevere link reg across call */ + bl platformsetup /* go setup pll,mux,memory */ + mov lr, ip /* restore link */ + mov pc, lr /* back to my caller */ +/* + ************************************************************************* + * + * Interrupt handling + * + ************************************************************************* + */ +@ +@ IRQ stack frame. +@ +#define S_FRAME_SIZE 72 + +#define S_OLD_R0 68 +#define S_PSR 64 +#define S_PC 60 +#define S_LR 56 +#define S_SP 52 + +#define S_IP 48 +#define S_FP 44 +#define S_R10 40 +#define S_R9 36 +#define S_R8 32 +#define S_R7 28 +#define S_R6 24 +#define S_R5 20 +#define S_R4 16 +#define S_R3 12 +#define S_R2 8 +#define S_R1 4 +#define S_R0 0 + +#define MODE_SVC 0x13 +#define I_BIT 0x80 + +/* + * use bad_save_user_regs for abort/prefetch/undef/swi ... + * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling + */ + + .macro bad_save_user_regs + sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current user stack + stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 + + ldr r2, _armboot_start + sub r2, r2, #(CFG_MALLOC_LEN) + sub r2, r2, #(CFG_GBL_DATA_SIZE+8) @ set base 2 words into abort stack + ldmia r2, {r2 - r3} @ get values for "aborted" pc and cpsr (into parm regs) + add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack + + add r5, sp, #S_SP + mov r1, lr + stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr + mov r0, sp @ save current stack into r0 (param register) + .endm + + .macro irq_save_user_regs + sub sp, sp, #S_FRAME_SIZE + stmia sp, {r0 - r12} @ Calling r0-r12 + add r8, sp, #S_PC @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good. + stmdb r8, {sp, lr}^ @ Calling SP, LR + str lr, [r8, #0] @ Save calling PC + mrs r6, spsr + str r6, [r8, #4] @ Save CPSR + str r0, [r8, #8] @ Save OLD_R0 + mov r0, sp + .endm + + .macro irq_restore_user_regs + ldmia sp, {r0 - lr}^ @ Calling r0 - lr + mov r0, r0 + ldr lr, [sp, #S_PC] @ Get PC + add sp, sp, #S_FRAME_SIZE + subs pc, lr, #4 @ return & move spsr_svc into cpsr + .endm + + .macro get_bad_stack + ldr r13, _armboot_start @ setup our mode stack (enter in banked mode) + sub r13, r13, #(CFG_MALLOC_LEN) @ move past malloc pool + sub r13, r13, #(CFG_GBL_DATA_SIZE+8) @ move to reserved a couple spots for abort stack + + str lr, [r13] @ save caller lr in position 0 of saved stack + mrs lr, spsr @ get the spsr + str lr, [r13, #4] @ save spsr in position 1 of saved stack + + mov r13, #MODE_SVC @ prepare SVC-Mode + @ msr spsr_c, r13 + msr spsr, r13 @ switch modes, make sure moves will execute + mov lr, pc @ capture return pc + movs pc, lr @ jump to next instruction & switch modes. + .endm + + .macro get_bad_stack_swi + sub r13, r13, #4 @ space on current stack for scratch reg. + str r0, [r13] @ save R0's value. + ldr r0, _armboot_start @ get data regions start + sub r0, r0, #(CFG_MALLOC_LEN) @ move past malloc pool + sub r0, r0, #(CFG_GBL_DATA_SIZE+8) @ move past gbl and a couple spots for abort stack + str lr, [r0] @ save caller lr in position 0 of saved stack + mrs r0, spsr @ get the spsr + str lr, [r0, #4] @ save spsr in position 1 of saved stack + ldr r0, [r13] @ restore r0 + add r13, r13, #4 @ pop stack entry + .endm + + .macro get_irq_stack @ setup IRQ stack + ldr sp, IRQ_STACK_START + .endm + + .macro get_fiq_stack @ setup FIQ stack + ldr sp, FIQ_STACK_START + .endm + +/* + * exception handlers + */ + .align 5 +undefined_instruction: + get_bad_stack + bad_save_user_regs + bl do_undefined_instruction + + .align 5 +software_interrupt: + get_bad_stack_swi + bad_save_user_regs + bl do_software_interrupt + + .align 5 +prefetch_abort: + get_bad_stack + bad_save_user_regs + bl do_prefetch_abort + + .align 5 +data_abort: + get_bad_stack + bad_save_user_regs + bl do_data_abort + + .align 5 +not_used: + get_bad_stack + bad_save_user_regs + bl do_not_used + +#ifdef CONFIG_USE_IRQ + + .align 5 +irq: + get_irq_stack + irq_save_user_regs + bl do_irq + irq_restore_user_regs + + .align 5 +fiq: + get_fiq_stack + /* someone ought to write a more effiction fiq_save_user_regs */ + irq_save_user_regs + bl do_fiq + irq_restore_user_regs + +#else + + .align 5 +irq: + get_bad_stack + bad_save_user_regs + bl do_irq + + .align 5 +fiq: + get_bad_stack + bad_save_user_regs + bl do_fiq + +#endif + .align 5 +.global arm1136_cache_flush +arm1136_cache_flush: + mcr p15, 0, r1, c7, c5, 0 @ invalidate I cache + mov pc, lr @ back to caller + + .align 5 +.globl reset_cpu +reset_cpu: + ldr r1, rstctl /* get addr for global reset reg */ + mov r3, #0x3 /* full reset pll+mpu */ + str r3, [r1] /* force reset */ + mov r0, r0 +_loop_forever: + b _loop_forever +rstctl: + .word PM_RSTCTRL_WKUP diff --git a/doc/README.ne2000 b/doc/README.ne2000 new file mode 100644 index 0000000000..d5ae9a9eb1 --- /dev/null +++ b/doc/README.ne2000 @@ -0,0 +1,38 @@ +This driver supports NE2000 compatible cards (those based on DP8390, +DP83902 and similar). It can be used with PCMCIA/CF cards provided +that the CCR is correctly initialized. + +The code is based on sources from the Linux kernel (pcnet_cs.c, +8390.h) and eCOS(if_dp83902a.c, if_dp83902a.h). Both of these 2 +wonderful world are GPL, so this is, of course, GPL. + +I developed and tested this driver on a custom PXA255 based system and +with a billionton CF network card connected to the PCMCIA interface of +the micro (have a look at README.PXA_CF for the support of this port). + +The options you have to specify in the config file are (with the +value for my board as an example): + +#define CONFIG_DRIVER_NE2000 + +- Enables the driver + +#define CONFIG_DRIVER_NE2000_BASE (0x20000000+0x300) + +- Address where the board is mapped + +#define CONFIG_DRIVER_NE2000_CCR (0x28000000+0x3f8) + +- Address of the CCR (card configuration register). It could be found +by enabling DEBUG in cmd_pcmcia.c. If this is not defined nothing is +done as far as PCMCIA support is concerned. + +#define CONFIG_DRIVER_NE2000_VAL (0x20) + +- The value to be written in the CCR. It selects among different I/O +spaces that could be used by the card. + + +Enjoy! + +Christian Pellegrin diff --git a/drivers/8390.h b/drivers/8390.h new file mode 100644 index 0000000000..4e3cdd2178 --- /dev/null +++ b/drivers/8390.h @@ -0,0 +1,126 @@ +/* + +Ported to U-Boot by Christian Pellegrin + +Based on sources from the Linux kernel (pcnet_cs.c, 8390.h) and +eCOS(if_dp83902a.c, if_dp83902a.h). Both of these 2 wonderful world +are GPL, so this is, of course, GPL. + +*/ + +/* Generic NS8390 register definitions. */ +/* This file is part of Donald Becker's 8390 drivers, and is distributed + under the same license. Auto-loading of 8390.o only in v2.2 - Paul G. + Some of these names and comments originated from the Crynwr + packet drivers, which are distributed under the GPL. */ + +#ifndef _8390_h +#define _8390_h + +/* Some generic ethernet register configurations. */ +#define E8390_TX_IRQ_MASK 0xa /* For register EN0_ISR */ +#define E8390_RX_IRQ_MASK 0x5 +#define E8390_RXCONFIG 0x4 /* EN0_RXCR: broadcasts, no multicast,errors */ +#define E8390_RXOFF 0x20 /* EN0_RXCR: Accept no packets */ +#define E8390_TXCONFIG 0x00 /* EN0_TXCR: Normal transmit mode */ +#define E8390_TXOFF 0x02 /* EN0_TXCR: Transmitter off */ + +/* Register accessed at EN_CMD, the 8390 base addr. */ +#define E8390_STOP 0x01 /* Stop and reset the chip */ +#define E8390_START 0x02 /* Start the chip, clear reset */ +#define E8390_TRANS 0x04 /* Transmit a frame */ +#define E8390_RREAD 0x08 /* Remote read */ +#define E8390_RWRITE 0x10 /* Remote write */ +#define E8390_NODMA 0x20 /* Remote DMA */ +#define E8390_PAGE0 0x00 /* Select page chip registers */ +#define E8390_PAGE1 0x40 /* using the two high-order bits */ +#define E8390_PAGE2 0x80 /* Page 3 is invalid. */ + +/* + * Only generate indirect loads given a machine that needs them. + * - removed AMIGA_PCMCIA from this list, handled as ISA io now + */ + +#define n2k_inb(port) (*((volatile unsigned char *)(port+CONFIG_DRIVER_NE2000_BASE))) +#define n2k_outb(val,port) (*((volatile unsigned char *)(port+CONFIG_DRIVER_NE2000_BASE)) = val) + +#define EI_SHIFT(x) (x) + +#define E8390_CMD EI_SHIFT(0x00) /* The command register (for all pages) */ +/* Page 0 register offsets. */ +#define EN0_CLDALO EI_SHIFT(0x01) /* Low byte of current local dma addr RD */ +#define EN0_STARTPG EI_SHIFT(0x01) /* Starting page of ring bfr WR */ +#define EN0_CLDAHI EI_SHIFT(0x02) /* High byte of current local dma addr RD */ +#define EN0_STOPPG EI_SHIFT(0x02) /* Ending page +1 of ring bfr WR */ +#define EN0_BOUNDARY EI_SHIFT(0x03) /* Boundary page of ring bfr RD WR */ +#define EN0_TSR EI_SHIFT(0x04) /* Transmit status reg RD */ +#define EN0_TPSR EI_SHIFT(0x04) /* Transmit starting page WR */ +#define EN0_NCR EI_SHIFT(0x05) /* Number of collision reg RD */ +#define EN0_TCNTLO EI_SHIFT(0x05) /* Low byte of tx byte count WR */ +#define EN0_FIFO EI_SHIFT(0x06) /* FIFO RD */ +#define EN0_TCNTHI EI_SHIFT(0x06) /* High byte of tx byte count WR */ +#define EN0_ISR EI_SHIFT(0x07) /* Interrupt status reg RD WR */ +#define EN0_CRDALO EI_SHIFT(0x08) /* low byte of current remote dma address RD */ +#define EN0_RSARLO EI_SHIFT(0x08) /* Remote start address reg 0 */ +#define EN0_CRDAHI EI_SHIFT(0x09) /* high byte, current remote dma address RD */ +#define EN0_RSARHI EI_SHIFT(0x09) /* Remote start address reg 1 */ +#define EN0_RCNTLO EI_SHIFT(0x0a) /* Remote byte count reg WR */ +#define EN0_RCNTHI EI_SHIFT(0x0b) /* Remote byte count reg WR */ +#define EN0_RSR EI_SHIFT(0x0c) /* rx status reg RD */ +#define EN0_RXCR EI_SHIFT(0x0c) /* RX configuration reg WR */ +#define EN0_TXCR EI_SHIFT(0x0d) /* TX configuration reg WR */ +#define EN0_COUNTER0 EI_SHIFT(0x0d) /* Rcv alignment error counter RD */ +#define EN0_DCFG EI_SHIFT(0x0e) /* Data configuration reg WR */ +#define EN0_COUNTER1 EI_SHIFT(0x0e) /* Rcv CRC error counter RD */ +#define EN0_IMR EI_SHIFT(0x0f) /* Interrupt mask reg WR */ +#define EN0_COUNTER2 EI_SHIFT(0x0f) /* Rcv missed frame error counter RD */ + +/* Bits in EN0_ISR - Interrupt status register */ +#define ENISR_RX 0x01 /* Receiver, no error */ +#define ENISR_TX 0x02 /* Transmitter, no error */ +#define ENISR_RX_ERR 0x04 /* Receiver, with error */ +#define ENISR_TX_ERR 0x08 /* Transmitter, with error */ +#define ENISR_OVER 0x10 /* Receiver overwrote the ring */ +#define ENISR_COUNTERS 0x20 /* Counters need emptying */ +#define ENISR_RDC 0x40 /* remote dma complete */ +#define ENISR_RESET 0x80 /* Reset completed */ +#define ENISR_ALL 0x3f /* Interrupts we will enable */ + +/* Bits in EN0_DCFG - Data config register */ +#define ENDCFG_WTS 0x01 /* word transfer mode selection */ +#define ENDCFG_BOS 0x02 /* byte order selection */ +#define ENDCFG_AUTO_INIT 0x10 /* Auto-init to remove packets from ring */ +#define ENDCFG_FIFO 0x40 /* 8 bytes */ + + + +/* Page 1 register offsets. */ +#define EN1_PHYS EI_SHIFT(0x01) /* This board's physical enet addr RD WR */ +#define EN1_PHYS_SHIFT(i) EI_SHIFT(i+1) /* Get and set mac address */ +#define EN1_CURPAG EI_SHIFT(0x07) /* Current memory page RD WR */ +#define EN1_MULT EI_SHIFT(0x08) /* Multicast filter mask array (8 bytes) RD WR */ +#define EN1_MULT_SHIFT(i) EI_SHIFT(8+i) /* Get and set multicast filter */ + +/* Bits in received packet status byte and EN0_RSR*/ +#define ENRSR_RXOK 0x01 /* Received a good packet */ +#define ENRSR_CRC 0x02 /* CRC error */ +#define ENRSR_FAE 0x04 /* frame alignment error */ +#define ENRSR_FO 0x08 /* FIFO overrun */ +#define ENRSR_MPA 0x10 /* missed pkt */ +#define ENRSR_PHY 0x20 /* physical/multicast address */ +#define ENRSR_DIS 0x40 /* receiver disable. set in monitor mode */ +#define ENRSR_DEF 0x80 /* deferring */ + +/* Transmitted packet status, EN0_TSR. */ +#define ENTSR_PTX 0x01 /* Packet transmitted without error */ +#define ENTSR_ND 0x02 /* The transmit wasn't deferred. */ +#define ENTSR_COL 0x04 /* The transmit collided at least once. */ +#define ENTSR_ABT 0x08 /* The transmit collided 16 times, and was deferred. */ +#define ENTSR_CRS 0x10 /* The carrier sense was lost. */ +#define ENTSR_FU 0x20 /* A "FIFO underrun" occurred during transmit. */ +#define ENTSR_CDH 0x40 /* The collision detect "heartbeat" signal was lost. */ +#define ENTSR_OWC 0x80 /* There was an out-of-window collision. */ + +#define NIC_RECEIVE_MONITOR_MODE 0x20 + +#endif /* _8390_h */ diff --git a/drivers/Makefile b/drivers/Makefile index 8b73d66d27..cc13a7f221 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -32,9 +32,10 @@ OBJS = 3c589.o 5701rls.o ali512x.o \ cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \ e1000.o eepro100.o \ i8042.o i82365.o inca-ip_sw.o keyboard.o \ - lan91c96.o natsemi.o netarm_eth.o netconsole.o \ + lan91c96.o \ + natsemi.o ne2000.o netarm_eth.o netconsole.o \ ns16550.o ns8382x.o ns87308.o omap1510_i2c.o \ - pci.o pci_auto.o pci_indirect.o \ + omap24xx_i2c.o pci.o pci_auto.o pci_indirect.o \ pcnet.o plb2800_eth.o \ ps2ser.o ps2mult.o pc_keyb.o \ rtl8019.o rtl8139.o rtl8169.o \ diff --git a/drivers/ne2000.c b/drivers/ne2000.c new file mode 100644 index 0000000000..b7ed876165 --- /dev/null +++ b/drivers/ne2000.c @@ -0,0 +1,963 @@ +/* +Ported to U-Boot by Christian Pellegrin + +Based on sources from the Linux kernel (pcnet_cs.c, 8390.h) and +eCOS(if_dp83902a.c, if_dp83902a.h). Both of these 2 wonderful world +are GPL, so this is, of course, GPL. + + +========================================================================== + +dev/if_dp83902a.c + +Ethernet device driver for NS DP83902a ethernet controller + +========================================================================== +####ECOSGPLCOPYRIGHTBEGIN#### +------------------------------------------- +This file is part of eCos, the Embedded Configurable Operating System. +Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. + +eCos is free software; you can redistribute it and/or modify it under +the terms of the GNU General Public License as published by the Free +Software Foundation; either version 2 or (at your option) any later version. + +eCos is distributed in the hope that it will be useful, but WITHOUT ANY +WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +for more details. + +You should have received a copy of the GNU General Public License along +with eCos; if not, write to the Free Software Foundation, Inc., +59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +As a special exception, if other files instantiate templates or use macros +or inline functions from this file, or you compile this file and link it +with other works to produce a work based on this file, this file does not +by itself cause the resulting work to be covered by the GNU General Public +License. However the source code for this file must still be made available +in accordance with section (3) of the GNU General Public License. + +This exception does not invalidate any other reasons why a work based on +this file might be covered by the GNU General Public License. + +Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. +at http://sources.redhat.com/ecos/ecos-license/ +------------------------------------------- +####ECOSGPLCOPYRIGHTEND#### +####BSDCOPYRIGHTBEGIN#### + +------------------------------------------- + +Portions of this software may have been derived from OpenBSD or other sources, +and are covered by the appropriate copyright disclaimers included herein. + +------------------------------------------- + +####BSDCOPYRIGHTEND#### +========================================================================== +#####DESCRIPTIONBEGIN#### + +Author(s): gthomas +Contributors: gthomas, jskov, rsandifo +Date: 2001-06-13 +Purpose: +Description: + +FIXME: Will fail if pinged with large packets (1520 bytes) +Add promisc config +Add SNMP + +####DESCRIPTIONEND#### + + +========================================================================== + +*/ + +#include +#include +#include +#include + +#ifdef CONFIG_DRIVER_NE2000 + +/* wor around udelay resetting OCR */ +static void my_udelay(long us) { + long tmo; + + tmo = get_timer (0) + us * CFG_HZ / 1000000; /* will this be much greater than 0 ? */ + while (get_timer (0) < tmo); +} + +#define mdelay(n) my_udelay((n)*1000) + +/* forward definition of function used for the uboot interface */ +void uboot_push_packet_len(int len); +void uboot_push_tx_done(int key, int val); + +/* timeout for tx/rx in s */ +#define TOUT 5 + +#define ETHER_ADDR_LEN 6 + +/* + ------------------------------------------------------------------------ + Debugging details + + Set to perms of: + 0 disables all debug output + 1 for process debug output + 2 for added data IO output: get_reg, put_reg + 4 for packet allocation/free output + 8 for only startup status, so we can tell we're installed OK +*/ +/*#define DEBUG 0xf*/ +#define DEBUG 0 + +#if DEBUG & 1 +#define DEBUG_FUNCTION() do { printf("%s\n", __FUNCTION__); } while (0) +#define DEBUG_LINE() do { printf("%d\n", __LINE__); } while (0) +#else +#define DEBUG_FUNCTION() do {} while(0) +#define DEBUG_LINE() do {} while(0) +#endif + +#include "ne2000.h" + +#if DEBUG & 1 +#define PRINTK(args...) printf(args) +#else +#define PRINTK(args...) +#endif + +static dp83902a_priv_data_t nic; /* just one instance of the card supported */ + +static bool +dp83902a_init(void) +{ + dp83902a_priv_data_t *dp = &nic; + cyg_uint8* base; + int i; + + DEBUG_FUNCTION(); + + base = dp->base; + if (!base) return false; /* No device found */ + + DEBUG_LINE(); + + /* Prepare ESA */ + DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1); /* Select page 1 */ + /* Use the address from the serial EEPROM */ + for (i = 0; i < 6; i++) + DP_IN(base, DP_P1_PAR0+i, dp->esa[i]); + DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE0); /* Select page 0 */ + + printf("NE2000 - %s ESA: %02x:%02x:%02x:%02x:%02x:%02x\n", + "eeprom", + dp->esa[0], + dp->esa[1], + dp->esa[2], + dp->esa[3], + dp->esa[4], + dp->esa[5] ); + + return true; +} + +static void +dp83902a_stop(void) +{ + dp83902a_priv_data_t *dp = &nic; + cyg_uint8 *base = dp->base; + + DEBUG_FUNCTION(); + + DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_STOP); /* Brutal */ + DP_OUT(base, DP_ISR, 0xFF); /* Clear any pending interrupts */ + DP_OUT(base, DP_IMR, 0x00); /* Disable all interrupts */ + + dp->running = false; +} + +/* + This function is called to "start up" the interface. It may be called + multiple times, even when the hardware is already running. It will be + called whenever something "hardware oriented" changes and should leave + the hardware ready to send/receive packets. +*/ +static void +dp83902a_start(unsigned char * enaddr) +{ + dp83902a_priv_data_t *dp = &nic; + cyg_uint8 *base = dp->base; + int i; + + DEBUG_FUNCTION(); + + DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_STOP); /* Brutal */ + DP_OUT(base, DP_DCR, DP_DCR_INIT); + DP_OUT(base, DP_RBCH, 0); /* Remote byte count */ + DP_OUT(base, DP_RBCL, 0); + DP_OUT(base, DP_RCR, DP_RCR_MON); /* Accept no packets */ + DP_OUT(base, DP_TCR, DP_TCR_LOCAL); /* Transmitter [virtually] off */ + DP_OUT(base, DP_TPSR, dp->tx_buf1); /* Transmitter start page */ + dp->tx1 = dp->tx2 = 0; + dp->tx_next = dp->tx_buf1; + dp->tx_started = false; + DP_OUT(base, DP_PSTART, dp->rx_buf_start); /* Receive ring start page */ + DP_OUT(base, DP_BNDRY, dp->rx_buf_end-1); /* Receive ring boundary */ + DP_OUT(base, DP_PSTOP, dp->rx_buf_end); /* Receive ring end page */ + dp->rx_next = dp->rx_buf_start-1; + DP_OUT(base, DP_ISR, 0xFF); /* Clear any pending interrupts */ + DP_OUT(base, DP_IMR, DP_IMR_All); /* Enable all interrupts */ + DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1 | DP_CR_STOP); /* Select page 1 */ + DP_OUT(base, DP_P1_CURP, dp->rx_buf_start); /* Current page - next free page for Rx */ + for (i = 0; i < ETHER_ADDR_LEN; i++) { + DP_OUT(base, DP_P1_PAR0+i, enaddr[i]); + } + /* Enable and start device */ + DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START); + DP_OUT(base, DP_TCR, DP_TCR_NORMAL); /* Normal transmit operations */ + DP_OUT(base, DP_RCR, DP_RCR_AB); /* Accept broadcast, no errors, no multicast */ + dp->running = true; +} + +/* + This routine is called to start the transmitter. It is split out from the + data handling routine so it may be called either when data becomes first + available or when an Tx interrupt occurs +*/ + +static void +dp83902a_start_xmit(int start_page, int len) +{ + dp83902a_priv_data_t *dp = (dp83902a_priv_data_t *) &nic; + cyg_uint8 *base = dp->base; + + DEBUG_FUNCTION(); + +#if DEBUG & 1 + printf("Tx pkt %d len %d\n", start_page, len); + if (dp->tx_started) + printf("TX already started?!?\n"); +#endif + + DP_OUT(base, DP_ISR, (DP_ISR_TxP | DP_ISR_TxE)); + DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START); + DP_OUT(base, DP_TBCL, len & 0xFF); + DP_OUT(base, DP_TBCH, len >> 8); + DP_OUT(base, DP_TPSR, start_page); + DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_TXPKT | DP_CR_START); + + dp->tx_started = true; +} + +/* + This routine is called to send data to the hardware. It is known a-priori + that there is free buffer space (dp->tx_next). +*/ +static void +dp83902a_send(unsigned char *data, int total_len, unsigned long key) +{ + struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic; + cyg_uint8 *base = dp->base; + int len, start_page, pkt_len, i, isr; +#if DEBUG & 4 + int dx; +#endif + + DEBUG_FUNCTION(); + + len = pkt_len = total_len; + if (pkt_len < IEEE_8023_MIN_FRAME) pkt_len = IEEE_8023_MIN_FRAME; + + start_page = dp->tx_next; + if (dp->tx_next == dp->tx_buf1) { + dp->tx1 = start_page; + dp->tx1_len = pkt_len; + dp->tx1_key = key; + dp->tx_next = dp->tx_buf2; + } else { + dp->tx2 = start_page; + dp->tx2_len = pkt_len; + dp->tx2_key = key; + dp->tx_next = dp->tx_buf1; + } + +#if DEBUG & 5 + printf("TX prep page %d len %d\n", start_page, pkt_len); +#endif + + DP_OUT(base, DP_ISR, DP_ISR_RDC); /* Clear end of DMA */ + { + /* Dummy read. The manual sez something slightly different, */ + /* but the code is extended a bit to do what Hitachi's monitor */ + /* does (i.e., also read data). */ + + cyg_uint16 tmp; + int len = 1; + + DP_OUT(base, DP_RSAL, 0x100-len); + DP_OUT(base, DP_RSAH, (start_page-1) & 0xff); + DP_OUT(base, DP_RBCL, len); + DP_OUT(base, DP_RBCH, 0); + DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_RDMA | DP_CR_START); + DP_IN_DATA(dp->data, tmp); + } + +#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA + /* Stall for a bit before continuing to work around random data */ + /* corruption problems on some platforms. */ + CYGACC_CALL_IF_DELAY_US(1); +#endif + + /* Send data to device buffer(s) */ + DP_OUT(base, DP_RSAL, 0); + DP_OUT(base, DP_RSAH, start_page); + DP_OUT(base, DP_RBCL, pkt_len & 0xFF); + DP_OUT(base, DP_RBCH, pkt_len >> 8); + DP_OUT(base, DP_CR, DP_CR_WDMA | DP_CR_START); + + /* Put data into buffer */ +#if DEBUG & 4 + printf(" sg buf %08lx len %08x\n ", (unsigned long) data, len); + dx = 0; +#endif + while (len > 0) { +#if DEBUG & 4 + printf(" %02x", *data); + if (0 == (++dx % 16)) printf("\n "); +#endif + DP_OUT_DATA(dp->data, *data++); + len--; + } +#if DEBUG & 4 + printf("\n"); +#endif + if (total_len < pkt_len) { +#if DEBUG & 4 + printf(" + %d bytes of padding\n", pkt_len - total_len); +#endif + /* Padding to 802.3 length was required */ + for (i = total_len; i < pkt_len;) { + i++; + DP_OUT_DATA(dp->data, 0); + } + } + +#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA + /* After last data write, delay for a bit before accessing the */ + /* device again, or we may get random data corruption in the last */ + /* datum (on some platforms). */ + CYGACC_CALL_IF_DELAY_US(1); +#endif + + /* Wait for DMA to complete */ + do { + DP_IN(base, DP_ISR, isr); + } while ((isr & DP_ISR_RDC) == 0); + /* Then disable DMA */ + DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START); + + /* Start transmit if not already going */ + if (!dp->tx_started) { + if (start_page == dp->tx1) { + dp->tx_int = 1; /* Expecting interrupt from BUF1 */ + } else { + dp->tx_int = 2; /* Expecting interrupt from BUF2 */ + } + dp83902a_start_xmit(start_page, pkt_len); + } +} + +/* + This function is called when a packet has been received. It's job is + to prepare to unload the packet from the hardware. Once the length of + the packet is known, the upper layer of the driver can be told. When + the upper layer is ready to unload the packet, the internal function + 'dp83902a_recv' will be called to actually fetch it from the hardware. +*/ +static void +dp83902a_RxEvent(void) +{ + struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic; + cyg_uint8 *base = dp->base; + unsigned char rsr; + unsigned char rcv_hdr[4]; + int i, len, pkt, cur; + + DEBUG_FUNCTION(); + + DP_IN(base, DP_RSR, rsr); + while (true) { + /* Read incoming packet header */ + DP_OUT(base, DP_CR, DP_CR_PAGE1 | DP_CR_NODMA | DP_CR_START); + DP_IN(base, DP_P1_CURP, cur); + DP_OUT(base, DP_P1_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START); + DP_IN(base, DP_BNDRY, pkt); + + pkt += 1; + if (pkt == dp->rx_buf_end) + pkt = dp->rx_buf_start; + + if (pkt == cur) { + break; + } + DP_OUT(base, DP_RBCL, sizeof(rcv_hdr)); + DP_OUT(base, DP_RBCH, 0); + DP_OUT(base, DP_RSAL, 0); + DP_OUT(base, DP_RSAH, pkt); + if (dp->rx_next == pkt) { + if (cur == dp->rx_buf_start) + DP_OUT(base, DP_BNDRY, dp->rx_buf_end-1); + else + DP_OUT(base, DP_BNDRY, cur-1); /* Update pointer */ + return; + } + dp->rx_next = pkt; + DP_OUT(base, DP_ISR, DP_ISR_RDC); /* Clear end of DMA */ + DP_OUT(base, DP_CR, DP_CR_RDMA | DP_CR_START); +#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_RX_DMA + CYGACC_CALL_IF_DELAY_US(10); +#endif + + for (i = 0; i < sizeof(rcv_hdr);) { + DP_IN_DATA(dp->data, rcv_hdr[i++]); + } + +#if DEBUG & 5 + printf("rx hdr %02x %02x %02x %02x\n", + rcv_hdr[0], rcv_hdr[1], rcv_hdr[2], rcv_hdr[3]); +#endif + len = ((rcv_hdr[3] << 8) | rcv_hdr[2]) - sizeof(rcv_hdr); + uboot_push_packet_len(len); + if (rcv_hdr[1] == dp->rx_buf_start) + DP_OUT(base, DP_BNDRY, dp->rx_buf_end-1); + else + DP_OUT(base, DP_BNDRY, rcv_hdr[1]-1); /* Update pointer */ + } +} + +/* + This function is called as a result of the "eth_drv_recv()" call above. + It's job is to actually fetch data for a packet from the hardware once + memory buffers have been allocated for the packet. Note that the buffers + may come in pieces, using a scatter-gather list. This allows for more + efficient processing in the upper layers of the stack. +*/ +static void +dp83902a_recv(unsigned char *data, int len) +{ + struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic; + cyg_uint8 *base = dp->base; + int i, mlen; + cyg_uint8 saved_char = 0; + bool saved; +#if DEBUG & 4 + int dx; +#endif + + DEBUG_FUNCTION(); + +#if DEBUG & 5 + printf("Rx packet %d length %d\n", dp->rx_next, len); +#endif + + /* Read incoming packet data */ + DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START); + DP_OUT(base, DP_RBCL, len & 0xFF); + DP_OUT(base, DP_RBCH, len >> 8); + DP_OUT(base, DP_RSAL, 4); /* Past header */ + DP_OUT(base, DP_RSAH, dp->rx_next); + DP_OUT(base, DP_ISR, DP_ISR_RDC); /* Clear end of DMA */ + DP_OUT(base, DP_CR, DP_CR_RDMA | DP_CR_START); +#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_RX_DMA + CYGACC_CALL_IF_DELAY_US(10); +#endif + + saved = false; + for (i = 0; i < 1; i++) { + if (data) { + mlen = len; +#if DEBUG & 4 + printf(" sg buf %08lx len %08x \n", (unsigned long) data, mlen); + dx = 0; +#endif + while (0 < mlen) { + /* Saved byte from previous loop? */ + if (saved) { + *data++ = saved_char; + mlen--; + saved = false; + continue; + } + + { + cyg_uint8 tmp; + DP_IN_DATA(dp->data, tmp); +#if DEBUG & 4 + printf(" %02x", tmp); + if (0 == (++dx % 16)) printf("\n "); +#endif + *data++ = tmp;; + mlen--; + } + } +#if DEBUG & 4 + printf("\n"); +#endif + } + } +} + +static void +dp83902a_TxEvent(void) +{ + struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic; + cyg_uint8 *base = dp->base; + unsigned char tsr; + unsigned long key; + + DEBUG_FUNCTION(); + + DP_IN(base, DP_TSR, tsr); + if (dp->tx_int == 1) { + key = dp->tx1_key; + dp->tx1 = 0; + } else { + key = dp->tx2_key; + dp->tx2 = 0; + } + /* Start next packet if one is ready */ + dp->tx_started = false; + if (dp->tx1) { + dp83902a_start_xmit(dp->tx1, dp->tx1_len); + dp->tx_int = 1; + } else if (dp->tx2) { + dp83902a_start_xmit(dp->tx2, dp->tx2_len); + dp->tx_int = 2; + } else { + dp->tx_int = 0; + } + /* Tell higher level we sent this packet */ + uboot_push_tx_done(key, 0); +} + +/* Read the tally counters to clear them. Called in response to a CNT */ +/* interrupt. */ +static void +dp83902a_ClearCounters(void) +{ + struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic; + cyg_uint8 *base = dp->base; + cyg_uint8 cnt1, cnt2, cnt3; + + DP_IN(base, DP_FER, cnt1); + DP_IN(base, DP_CER, cnt2); + DP_IN(base, DP_MISSED, cnt3); + DP_OUT(base, DP_ISR, DP_ISR_CNT); +} + +/* Deal with an overflow condition. This code follows the procedure set */ +/* out in section 7.0 of the datasheet. */ +static void +dp83902a_Overflow(void) +{ + struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *)&nic; + cyg_uint8 *base = dp->base; + cyg_uint8 isr; + + /* Issue a stop command and wait 1.6ms for it to complete. */ + DP_OUT(base, DP_CR, DP_CR_STOP | DP_CR_NODMA); + CYGACC_CALL_IF_DELAY_US(1600); + + /* Clear the remote byte counter registers. */ + DP_OUT(base, DP_RBCL, 0); + DP_OUT(base, DP_RBCH, 0); + + /* Enter loopback mode while we clear the buffer. */ + DP_OUT(base, DP_TCR, DP_TCR_LOCAL); + DP_OUT(base, DP_CR, DP_CR_START | DP_CR_NODMA); + + /* Read in as many packets as we can and acknowledge any and receive */ + /* interrupts. Since the buffer has overflowed, a receive event of */ + /* some kind will have occured. */ + dp83902a_RxEvent(); + DP_OUT(base, DP_ISR, DP_ISR_RxP|DP_ISR_RxE); + + /* Clear the overflow condition and leave loopback mode. */ + DP_OUT(base, DP_ISR, DP_ISR_OFLW); + DP_OUT(base, DP_TCR, DP_TCR_NORMAL); + + /* If a transmit command was issued, but no transmit event has occured, */ + /* restart it here. */ + DP_IN(base, DP_ISR, isr); + if (dp->tx_started && !(isr & (DP_ISR_TxP|DP_ISR_TxE))) { + DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_TXPKT | DP_CR_START); + } +} + +static void +dp83902a_poll(void) +{ + struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic; + cyg_uint8 *base = dp->base; + unsigned char isr; + + DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE0 | DP_CR_START); + DP_IN(base, DP_ISR, isr); + while (0 != isr) { + /* The CNT interrupt triggers when the MSB of one of the error */ + /* counters is set. We don't much care about these counters, but */ + /* we should read their values to reset them. */ + if (isr & DP_ISR_CNT) { + dp83902a_ClearCounters(); + } + /* Check for overflow. It's a special case, since there's a */ + /* particular procedure that must be followed to get back into */ + /* a running state.a */ + if (isr & DP_ISR_OFLW) { + dp83902a_Overflow(); + } else { + /* Other kinds of interrupts can be acknowledged simply by */ + /* clearing the relevant bits of the ISR. Do that now, then */ + /* handle the interrupts we care about. */ + DP_OUT(base, DP_ISR, isr); /* Clear set bits */ + if (!dp->running) break; /* Is this necessary? */ + /* Check for tx_started on TX event since these may happen */ + /* spuriously it seems. */ + if (isr & (DP_ISR_TxP|DP_ISR_TxE) && dp->tx_started) { + dp83902a_TxEvent(); + } + if (isr & (DP_ISR_RxP|DP_ISR_RxE)) { + dp83902a_RxEvent(); + } + } + DP_IN(base, DP_ISR, isr); + } +} + +/* find prom (taken from pc_net_cs.c from Linux) */ + +#include "8390.h" + +typedef struct hw_info_t { + u_int offset; + u_char a0, a1, a2; + u_int flags; +} hw_info_t; + +#define DELAY_OUTPUT 0x01 +#define HAS_MISC_REG 0x02 +#define USE_BIG_BUF 0x04 +#define HAS_IBM_MISC 0x08 +#define IS_DL10019 0x10 +#define IS_DL10022 0x20 +#define HAS_MII 0x40 +#define USE_SHMEM 0x80 /* autodetected */ + +#define AM79C9XX_HOME_PHY 0x00006B90 /* HomePNA PHY */ +#define AM79C9XX_ETH_PHY 0x00006B70 /* 10baseT PHY */ +#define MII_PHYID_REV_MASK 0xfffffff0 +#define MII_PHYID_REG1 0x02 +#define MII_PHYID_REG2 0x03 + +static hw_info_t hw_info[] = { + { /* Accton EN2212 */ 0x0ff0, 0x00, 0x00, 0xe8, DELAY_OUTPUT }, + { /* Allied Telesis LA-PCM */ 0x0ff0, 0x00, 0x00, 0xf4, 0 }, + { /* APEX MultiCard */ 0x03f4, 0x00, 0x20, 0xe5, 0 }, + { /* ASANTE FriendlyNet */ 0x4910, 0x00, 0x00, 0x94, + DELAY_OUTPUT | HAS_IBM_MISC }, + { /* Danpex EN-6200P2 */ 0x0110, 0x00, 0x40, 0xc7, 0 }, + { /* DataTrek NetCard */ 0x0ff0, 0x00, 0x20, 0xe8, 0 }, + { /* Dayna CommuniCard E */ 0x0110, 0x00, 0x80, 0x19, 0 }, + { /* D-Link DE-650 */ 0x0040, 0x00, 0x80, 0xc8, 0 }, + { /* EP-210 Ethernet */ 0x0110, 0x00, 0x40, 0x33, 0 }, + { /* EP4000 Ethernet */ 0x01c0, 0x00, 0x00, 0xb4, 0 }, + { /* Epson EEN10B */ 0x0ff0, 0x00, 0x00, 0x48, + HAS_MISC_REG | HAS_IBM_MISC }, + { /* ELECOM Laneed LD-CDWA */ 0xb8, 0x08, 0x00, 0x42, 0 }, + { /* Hypertec Ethernet */ 0x01c0, 0x00, 0x40, 0x4c, 0 }, + { /* IBM CCAE */ 0x0ff0, 0x08, 0x00, 0x5a, + HAS_MISC_REG | HAS_IBM_MISC }, + { /* IBM CCAE */ 0x0ff0, 0x00, 0x04, 0xac, + HAS_MISC_REG | HAS_IBM_MISC }, + { /* IBM CCAE */ 0x0ff0, 0x00, 0x06, 0x29, + HAS_MISC_REG | HAS_IBM_MISC }, + { /* IBM FME */ 0x0374, 0x08, 0x00, 0x5a, + HAS_MISC_REG | HAS_IBM_MISC }, + { /* IBM FME */ 0x0374, 0x00, 0x04, 0xac, + HAS_MISC_REG | HAS_IBM_MISC }, + { /* Kansai KLA-PCM/T */ 0x0ff0, 0x00, 0x60, 0x87, + HAS_MISC_REG | HAS_IBM_MISC }, + { /* NSC DP83903 */ 0x0374, 0x08, 0x00, 0x17, + HAS_MISC_REG | HAS_IBM_MISC }, + { /* NSC DP83903 */ 0x0374, 0x00, 0xc0, 0xa8, + HAS_MISC_REG | HAS_IBM_MISC }, + { /* NSC DP83903 */ 0x0374, 0x00, 0xa0, 0xb0, + HAS_MISC_REG | HAS_IBM_MISC }, + { /* NSC DP83903 */ 0x0198, 0x00, 0x20, 0xe0, + HAS_MISC_REG | HAS_IBM_MISC }, + { /* I-O DATA PCLA/T */ 0x0ff0, 0x00, 0xa0, 0xb0, 0 }, + { /* Katron PE-520 */ 0x0110, 0x00, 0x40, 0xf6, 0 }, + { /* Kingston KNE-PCM/x */ 0x0ff0, 0x00, 0xc0, 0xf0, + HAS_MISC_REG | HAS_IBM_MISC }, + { /* Kingston KNE-PCM/x */ 0x0ff0, 0xe2, 0x0c, 0x0f, + HAS_MISC_REG | HAS_IBM_MISC }, + { /* Kingston KNE-PC2 */ 0x0180, 0x00, 0xc0, 0xf0, 0 }, + { /* Maxtech PCN2000 */ 0x5000, 0x00, 0x00, 0xe8, 0 }, + { /* NDC Instant-Link */ 0x003a, 0x00, 0x80, 0xc6, 0 }, + { /* NE2000 Compatible */ 0x0ff0, 0x00, 0xa0, 0x0c, 0 }, + { /* Network General Sniffer */ 0x0ff0, 0x00, 0x00, 0x65, + HAS_MISC_REG | HAS_IBM_MISC }, + { /* Panasonic VEL211 */ 0x0ff0, 0x00, 0x80, 0x45, + HAS_MISC_REG | HAS_IBM_MISC }, + { /* PreMax PE-200 */ 0x07f0, 0x00, 0x20, 0xe0, 0 }, + { /* RPTI EP400 */ 0x0110, 0x00, 0x40, 0x95, 0 }, + { /* SCM Ethernet */ 0x0ff0, 0x00, 0x20, 0xcb, 0 }, + { /* Socket EA */ 0x4000, 0x00, 0xc0, 0x1b, + DELAY_OUTPUT | HAS_MISC_REG | USE_BIG_BUF }, + { /* Socket LP-E CF+ */ 0x01c0, 0x00, 0xc0, 0x1b, 0 }, + { /* SuperSocket RE450T */ 0x0110, 0x00, 0xe0, 0x98, 0 }, + { /* Volktek NPL-402CT */ 0x0060, 0x00, 0x40, 0x05, 0 }, + { /* NEC PC-9801N-J12 */ 0x0ff0, 0x00, 0x00, 0x4c, 0 }, + { /* PCMCIA Technology OEM */ 0x01c8, 0x00, 0xa0, 0x0c, 0 } +}; + +#define NR_INFO (sizeof(hw_info)/sizeof(hw_info_t)) + +static hw_info_t default_info = { 0, 0, 0, 0, 0 }; + +unsigned char dev_addr[6]; + +#define PCNET_CMD 0x00 +#define PCNET_DATAPORT 0x10 /* NatSemi-defined port window offset. */ +#define PCNET_RESET 0x1f /* Issue a read to reset, a write to clear. */ +#define PCNET_MISC 0x18 /* For IBM CCAE and Socket EA cards */ + +unsigned long nic_base; + +static void pcnet_reset_8390(void) +{ + int i, r; + + PRINTK("nic base is %lx\n", nic_base); + +#if 1 + n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD); + PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD)); + n2k_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, E8390_CMD); + PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD)); + n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD); + PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD)); +#endif + n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD); + + n2k_outb(n2k_inb(nic_base + PCNET_RESET), PCNET_RESET); + + for (i = 0; i < 100; i++) { + if ((r = (n2k_inb(EN0_ISR) & ENISR_RESET)) != 0) + break; + PRINTK("got %x in reset\n", r); + my_udelay(100); + } + n2k_outb(ENISR_RESET, EN0_ISR); /* Ack intr. */ + + if (i == 100) + printf("pcnet_reset_8390() did not complete.\n"); +} /* pcnet_reset_8390 */ + +static hw_info_t * get_prom(void ) { + unsigned char prom[32]; + int i, j; + struct { + u_char value, offset; + } program_seq[] = { + {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/ + {0x48, EN0_DCFG}, /* Set byte-wide (0x48) access. */ + {0x00, EN0_RCNTLO}, /* Clear the count regs. */ + {0x00, EN0_RCNTHI}, + {0x00, EN0_IMR}, /* Mask completion irq. */ + {0xFF, EN0_ISR}, + {E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */ + {E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */ + {32, EN0_RCNTLO}, + {0x00, EN0_RCNTHI}, + {0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */ + {0x00, EN0_RSARHI}, + {E8390_RREAD+E8390_START, E8390_CMD}, + }; + + PRINTK("trying to get MAC via prom reading\n"); + + pcnet_reset_8390(); + + mdelay(10); + + for (i = 0; i < sizeof(program_seq)/sizeof(program_seq[0]); i++) + n2k_outb(program_seq[i].value, program_seq[i].offset); + + PRINTK("PROM:"); + for (i = 0; i < 32; i++) { + prom[i] = n2k_inb(PCNET_DATAPORT); + PRINTK(" %02x", prom[i]); + } + PRINTK("\n"); + for (i = 0; i < NR_INFO; i++) { + if ((prom[0] == hw_info[i].a0) && + (prom[2] == hw_info[i].a1) && + (prom[4] == hw_info[i].a2)) { + PRINTK("matched board %d\n", i); + break; + } + } + if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) { + for (j = 0; j < 6; j++) + dev_addr[j] = prom[j<<1]; + PRINTK("on exit i is %d/%ld\n", i, NR_INFO); + PRINTK("MAC address is %02x:%02x:%02x:%02x:%02x:%02x\n", + dev_addr[0],dev_addr[1],dev_addr[2],dev_addr[3],dev_addr[4],dev_addr[5]); + return (i < NR_INFO) ? hw_info+i : &default_info; + } + return NULL; +} + +/* U-boot specific routines */ + +#define NB 5 + +static unsigned char *pbuf = NULL; +static int plen[NB]; +static int nrx = 0; + +static int pkey = -1; + +void uboot_push_packet_len(int len) { + PRINTK("pushed len = %d, nrx = %d\n", len, nrx); + if (len>=2000) { + printf("NE2000: packet too big\n"); + return; + } + if (nrx >= NB) { + printf("losing packets in rx\n"); + return; + } + plen[nrx] = len; + dp83902a_recv(&pbuf[nrx*2000], len); + nrx++; +} + +void uboot_push_tx_done(int key, int val) { + PRINTK("pushed key = %d\n", key); + pkey = key; +} + +int eth_init(bd_t *bd) { + static hw_info_t * r; + char ethaddr[20]; + + PRINTK("### eth_init\n"); + + if (!pbuf) { + pbuf = malloc(NB*2000); + if (!pbuf) { + printf("Cannot allocate rx buffers\n"); + return -1; + } + } + +#ifdef CONFIG_DRIVER_NE2000_CCR + { + volatile unsigned char *p = (volatile unsigned char *) CONFIG_DRIVER_NE2000_CCR; + + PRINTK("CCR before is %x\n", *p); + *p = CONFIG_DRIVER_NE2000_VAL; + PRINTK("CCR after is %x\n", *p); + } +#endif + + nic_base = CONFIG_DRIVER_NE2000_BASE; + nic.base = (cyg_uint8 *) CONFIG_DRIVER_NE2000_BASE; + + r = get_prom(); + if (!r) + return -1; + + sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X", + dev_addr[0], dev_addr[1], + dev_addr[2], dev_addr[3], + dev_addr[4], dev_addr[5]) ; + PRINTK("Set environment from HW MAC addr = \"%s\"\n", ethaddr); + setenv ("ethaddr", ethaddr); + + +#define DP_DATA 0x10 + nic.data = nic.base + DP_DATA; + nic.tx_buf1 = 0x40; + nic.tx_buf2 = 0x48; + nic.rx_buf_start = 0x50; + nic.rx_buf_end = 0x80; + + if (dp83902a_init() == false) + return -1; + dp83902a_start(dev_addr); + return 0; +} + +void eth_halt() { + + PRINTK("### eth_halt\n"); + + dp83902a_stop(); +} + +int eth_rx() { + int j, tmo; + + PRINTK("### eth_rx\n"); + + tmo = get_timer (0) + TOUT * CFG_HZ; + while(1) { + dp83902a_poll(); + if (nrx > 0) { + for(j=0; j= tmo) { + printf("timeout during rx\n"); + return 0; + } + } + return 0; +} + +int eth_send(volatile void *packet, int length) { + int tmo; + + PRINTK("### eth_send\n"); + + pkey = -1; + + dp83902a_send((unsigned char *) packet, length, 666); + tmo = get_timer (0) + TOUT * CFG_HZ; + while(1) { + dp83902a_poll(); + if (pkey != -1) { + PRINTK("Packet sucesfully sent\n"); + return 0; + } + if (get_timer (0) >= tmo) { + printf("transmission error (timoeut)\n"); + return 0; + } + + } + return 0; +} + +#endif diff --git a/drivers/ne2000.h b/drivers/ne2000.h new file mode 100644 index 0000000000..2955533d7a --- /dev/null +++ b/drivers/ne2000.h @@ -0,0 +1,279 @@ +/* +Ported to U-Boot by Christian Pellegrin + +Based on sources from the Linux kernel (pcnet_cs.c, 8390.h) and +eCOS(if_dp83902a.c, if_dp83902a.h). Both of these 2 wonderful world +are GPL, so this is, of course, GPL. + + +========================================================================== + + dev/dp83902a.h + + National Semiconductor DP83902a ethernet chip + +========================================================================== +####ECOSGPLCOPYRIGHTBEGIN#### + ------------------------------------------- + This file is part of eCos, the Embedded Configurable Operating System. + Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. + + eCos is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2 or (at your option) any later version. + + eCos is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with eCos; if not, write to the Free Software Foundation, Inc., + 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + + As a special exception, if other files instantiate templates or use macros + or inline functions from this file, or you compile this file and link it + with other works to produce a work based on this file, this file does not + by itself cause the resulting work to be covered by the GNU General Public + License. However the source code for this file must still be made available + in accordance with section (3) of the GNU General Public License. + + This exception does not invalidate any other reasons why a work based on + this file might be covered by the GNU General Public License. + + Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. + at http://sources.redhat.com/ecos/ecos-license/ */ + ------------------------------------------- +####ECOSGPLCOPYRIGHTEND#### +####BSDCOPYRIGHTBEGIN#### + + ------------------------------------------- + + Portions of this software may have been derived from OpenBSD or other sources, + and are covered by the appropriate copyright disclaimers included herein. + + ------------------------------------------- + +####BSDCOPYRIGHTEND#### +========================================================================== +#####DESCRIPTIONBEGIN#### + + Author(s): gthomas + Contributors: gthomas, jskov + Date: 2001-06-13 + Purpose: + Description: + +####DESCRIPTIONEND#### + +========================================================================== + +*/ + +/* + ------------------------------------------------------------------------ + Macros for accessing DP registers + These can be overridden by the platform header +*/ + +#define DP_IN(_b_, _o_, _d_) (_d_) = *( (volatile unsigned char *) ((_b_)+(_o_))) +#define DP_OUT(_b_, _o_, _d_) *( (volatile unsigned char *) ((_b_)+(_o_))) = (_d_) + +#define DP_IN_DATA(_b_, _d_) (_d_) = *( (volatile unsigned char *) ((_b_))) +#define DP_OUT_DATA(_b_, _d_) *( (volatile unsigned char *) ((_b_))) = (_d_) + + +/* here is all the data */ + +#define cyg_uint8 unsigned char +#define cyg_uint16 unsigned short +#define bool int + +#define false 0 +#define true 1 + +#define CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA 1 +#define CYGACC_CALL_IF_DELAY_US(X) my_udelay(X) + +typedef struct dp83902a_priv_data { + cyg_uint8* base; + cyg_uint8* data; + cyg_uint8* reset; + int tx_next; /* First free Tx page */ + int tx_int; /* Expecting interrupt from this buffer */ + int rx_next; /* First free Rx page */ + int tx1, tx2; /* Page numbers for Tx buffers */ + unsigned long tx1_key, tx2_key; /* Used to ack when packet sent */ + int tx1_len, tx2_len; + bool tx_started, running, hardwired_esa; + cyg_uint8 esa[6]; + void* plf_priv; + + /* Buffer allocation */ + int tx_buf1, tx_buf2; + int rx_buf_start, rx_buf_end; +} dp83902a_priv_data_t; + +/* + ------------------------------------------------------------------------ + Some forward declarations +*/ +static void dp83902a_poll(void); + +/* ------------------------------------------------------------------------ */ +/* Register offsets */ + +#define DP_CR 0x00 +#define DP_CLDA0 0x01 +#define DP_PSTART 0x01 /* write */ +#define DP_CLDA1 0x02 +#define DP_PSTOP 0x02 /* write */ +#define DP_BNDRY 0x03 +#define DP_TSR 0x04 +#define DP_TPSR 0x04 /* write */ +#define DP_NCR 0x05 +#define DP_TBCL 0x05 /* write */ +#define DP_FIFO 0x06 +#define DP_TBCH 0x06 /* write */ +#define DP_ISR 0x07 +#define DP_CRDA0 0x08 +#define DP_RSAL 0x08 /* write */ +#define DP_CRDA1 0x09 +#define DP_RSAH 0x09 /* write */ +#define DP_RBCL 0x0a /* write */ +#define DP_RBCH 0x0b /* write */ +#define DP_RSR 0x0c +#define DP_RCR 0x0c /* write */ +#define DP_FER 0x0d +#define DP_TCR 0x0d /* write */ +#define DP_CER 0x0e +#define DP_DCR 0x0e /* write */ +#define DP_MISSED 0x0f +#define DP_IMR 0x0f /* write */ +#define DP_DATAPORT 0x10 /* "eprom" data port */ + +#define DP_P1_CR 0x00 +#define DP_P1_PAR0 0x01 +#define DP_P1_PAR1 0x02 +#define DP_P1_PAR2 0x03 +#define DP_P1_PAR3 0x04 +#define DP_P1_PAR4 0x05 +#define DP_P1_PAR5 0x06 +#define DP_P1_CURP 0x07 +#define DP_P1_MAR0 0x08 +#define DP_P1_MAR1 0x09 +#define DP_P1_MAR2 0x0a +#define DP_P1_MAR3 0x0b +#define DP_P1_MAR4 0x0c +#define DP_P1_MAR5 0x0d +#define DP_P1_MAR6 0x0e +#define DP_P1_MAR7 0x0f + +#define DP_P2_CR 0x00 +#define DP_P2_PSTART 0x01 +#define DP_P2_CLDA0 0x01 /* write */ +#define DP_P2_PSTOP 0x02 +#define DP_P2_CLDA1 0x02 /* write */ +#define DP_P2_RNPP 0x03 +#define DP_P2_TPSR 0x04 +#define DP_P2_LNPP 0x05 +#define DP_P2_ACH 0x06 +#define DP_P2_ACL 0x07 +#define DP_P2_RCR 0x0c +#define DP_P2_TCR 0x0d +#define DP_P2_DCR 0x0e +#define DP_P2_IMR 0x0f + +/* Command register - common to all pages */ + +#define DP_CR_STOP 0x01 /* Stop: software reset */ +#define DP_CR_START 0x02 /* Start: initialize device */ +#define DP_CR_TXPKT 0x04 /* Transmit packet */ +#define DP_CR_RDMA 0x08 /* Read DMA (recv data from device) */ +#define DP_CR_WDMA 0x10 /* Write DMA (send data to device) */ +#define DP_CR_SEND 0x18 /* Send packet */ +#define DP_CR_NODMA 0x20 /* Remote (or no) DMA */ +#define DP_CR_PAGE0 0x00 /* Page select */ +#define DP_CR_PAGE1 0x40 +#define DP_CR_PAGE2 0x80 +#define DP_CR_PAGEMSK 0x3F /* Used to mask out page bits */ + +/* Data configuration register */ + +#define DP_DCR_WTS 0x01 /* 1=16 bit word transfers */ +#define DP_DCR_BOS 0x02 /* 1=Little Endian */ +#define DP_DCR_LAS 0x04 /* 1=Single 32 bit DMA mode */ +#define DP_DCR_LS 0x08 /* 1=normal mode, 0=loopback */ +#define DP_DCR_ARM 0x10 /* 0=no send command (program I/O) */ +#define DP_DCR_FIFO_1 0x00 /* FIFO threshold */ +#define DP_DCR_FIFO_2 0x20 +#define DP_DCR_FIFO_4 0x40 +#define DP_DCR_FIFO_6 0x60 + +#define DP_DCR_INIT (DP_DCR_LS|DP_DCR_FIFO_4) + +/* Interrupt status register */ + +#define DP_ISR_RxP 0x01 /* Packet received */ +#define DP_ISR_TxP 0x02 /* Packet transmitted */ +#define DP_ISR_RxE 0x04 /* Receive error */ +#define DP_ISR_TxE 0x08 /* Transmit error */ +#define DP_ISR_OFLW 0x10 /* Receive overflow */ +#define DP_ISR_CNT 0x20 /* Tally counters need emptying */ +#define DP_ISR_RDC 0x40 /* Remote DMA complete */ +#define DP_ISR_RESET 0x80 /* Device has reset (shutdown, error) */ + +/* Interrupt mask register */ + +#define DP_IMR_RxP 0x01 /* Packet received */ +#define DP_IMR_TxP 0x02 /* Packet transmitted */ +#define DP_IMR_RxE 0x04 /* Receive error */ +#define DP_IMR_TxE 0x08 /* Transmit error */ +#define DP_IMR_OFLW 0x10 /* Receive overflow */ +#define DP_IMR_CNT 0x20 /* Tall counters need emptying */ +#define DP_IMR_RDC 0x40 /* Remote DMA complete */ + +#define DP_IMR_All 0x3F /* Everything but remote DMA */ + +/* Receiver control register */ + +#define DP_RCR_SEP 0x01 /* Save bad(error) packets */ +#define DP_RCR_AR 0x02 /* Accept runt packets */ +#define DP_RCR_AB 0x04 /* Accept broadcast packets */ +#define DP_RCR_AM 0x08 /* Accept multicast packets */ +#define DP_RCR_PROM 0x10 /* Promiscuous mode */ +#define DP_RCR_MON 0x20 /* Monitor mode - 1=accept no packets */ + +/* Receiver status register */ + +#define DP_RSR_RxP 0x01 /* Packet received */ +#define DP_RSR_CRC 0x02 /* CRC error */ +#define DP_RSR_FRAME 0x04 /* Framing error */ +#define DP_RSR_FO 0x08 /* FIFO overrun */ +#define DP_RSR_MISS 0x10 /* Missed packet */ +#define DP_RSR_PHY 0x20 /* 0=pad match, 1=mad match */ +#define DP_RSR_DIS 0x40 /* Receiver disabled */ +#define DP_RSR_DFR 0x80 /* Receiver processing deferred */ + +/* Transmitter control register */ + +#define DP_TCR_NOCRC 0x01 /* 1=inhibit CRC */ +#define DP_TCR_NORMAL 0x00 /* Normal transmitter operation */ +#define DP_TCR_LOCAL 0x02 /* Internal NIC loopback */ +#define DP_TCR_INLOOP 0x04 /* Full internal loopback */ +#define DP_TCR_OUTLOOP 0x08 /* External loopback */ +#define DP_TCR_ATD 0x10 /* Auto transmit disable */ +#define DP_TCR_OFFSET 0x20 /* Collision offset adjust */ + +/* Transmit status register */ + +#define DP_TSR_TxP 0x01 /* Packet transmitted */ +#define DP_TSR_COL 0x04 /* Collision (at least one) */ +#define DP_TSR_ABT 0x08 /* Aborted because of too many collisions */ +#define DP_TSR_CRS 0x10 /* Lost carrier */ +#define DP_TSR_FU 0x20 /* FIFO underrun */ +#define DP_TSR_CDH 0x40 /* Collision Detect Heartbeat */ +#define DP_TSR_OWC 0x80 /* Collision outside normal window */ + +#define IEEE_8023_MAX_FRAME 1518 /* Largest possible ethernet frame */ +#define IEEE_8023_MIN_FRAME 64 /* Smallest possible ethernet frame */ diff --git a/drivers/ns16550.c b/drivers/ns16550.c index f9fe819c1d..2429464d89 100644 --- a/drivers/ns16550.c +++ b/drivers/ns16550.c @@ -17,7 +17,7 @@ void NS16550_init (NS16550_t com_port, int baud_divisor) { com_port->ier = 0x00; -#ifdef CONFIG_OMAP1510 +#ifdef CONFIG_OMAP com_port->mdr1 = 0x7; /* mode select reset TL16C750*/ #endif com_port->lcr = LCR_BKSE | LCRVAL; @@ -26,8 +26,12 @@ void NS16550_init (NS16550_t com_port, int baud_divisor) com_port->lcr = LCRVAL; com_port->mcr = MCRVAL; com_port->fcr = FCRVAL; -#if defined(CONFIG_OMAP1510) || defined(CONFIG_OMAP1610) || defined(CONFIG_OMAP730) - com_port->mdr1 = 0; /* select uart mode */ +#if defined(CONFIG_OMAP) +#if defined(CONFIG_APTIX) + com_port->mdr1 = 3; /* /13 mode so Aptix 6MHz can hit 115200 */ +#else + com_port->mdr1 = 0; /* /16 is proper to hit 115200 with 48MHz */ +#endif #endif } diff --git a/drivers/omap24xx_i2c.c b/drivers/omap24xx_i2c.c new file mode 100644 index 0000000000..74238633f0 --- /dev/null +++ b/drivers/omap24xx_i2c.c @@ -0,0 +1,317 @@ +/* + * Basic I2C functions + * + * Copyright (c) 2004 Texas Instruments + * + * This package is free software; you can redistribute it and/or + * modify it under the terms of the license found in the file + * named COPYING that should have accompanied this file. + * + * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. + * + * Author: Jian Zhang jzhang@ti.com, Texas Instruments + * + * Copyright (c) 2003 Wolfgang Denk, wd@denx.de + * Rewritten to fit into the current U-Boot framework + * + * Adapted for OMAP2420 I2C, r-woodruff2@ti.com + * + */ + +#include +#include +#include + +#define inw(a) __raw_readw(a) +#define outw(a,v) __raw_writew(a,v) + +#ifdef CONFIG_DRIVER_OMAP24XX_I2C + +static void wait_for_bb (void); +static u16 wait_for_pin (void); +void flush_fifo(void); + +void i2c_init (int speed, int slaveadd) +{ + u16 scl; + + if (inw (I2C_CON) & I2C_CON_EN) { + outw (0, I2C_CON); + udelay (50000); + } + + /* 12Mhz I2C module clock */ + outw (0, I2C_PSC); + speed = speed/1000; /* 100 or 400 */ + scl = ((12000/(speed*2)) - 7); /* use 7 when PSC = 0 */ + outw (scl, I2C_SCLL); + outw (scl, I2C_SCLH); + /* own address */ + outw (slaveadd, I2C_OA); + outw (I2C_CON_EN, I2C_CON); + outw (0, I2C_CNT); + /* have to enable intrrupts or OMAP i2c module doesn't work */ + outw (I2C_IE_XRDY_IE | I2C_IE_RRDY_IE | I2C_IE_ARDY_IE | + I2C_IE_NACK_IE | I2C_IE_AL_IE, I2C_IE); + udelay (1000); +} + +static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value) +{ + int i2c_error = 0; + u16 status; + + /* wait until bus not busy */ + wait_for_bb (); + + /* one byte only */ + outw (1, I2C_CNT); + /* set slave address */ + outw (devaddr, I2C_SA); + /* no stop bit needed here */ + outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX, I2C_CON); + + status = wait_for_pin (); + + if (status & I2C_STAT_XRDY) { + /* Important: have to use byte access */ + *(volatile u8 *) (I2C_DATA) = regoffset; + udelay (20000); + if (inw (I2C_STAT) & I2C_STAT_NACK) { + i2c_error = 1; + } + } else { + i2c_error = 1; + } + + if (!i2c_error) { + /* free bus, otherwise we can't use a combined transction */ + outw (0, I2C_CON); + while (inw (I2C_STAT) || (inw (I2C_CON) & I2C_CON_MST)) { + udelay (10000); + /* Have to clear pending interrupt to clear I2C_STAT */ + outw (0xFFFF, I2C_STAT); + } + + wait_for_bb (); + /* set slave address */ + outw (devaddr, I2C_SA); + /* read one byte from slave */ + outw (1, I2C_CNT); + /* need stop bit here */ + outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP, + I2C_CON); + + status = wait_for_pin (); + if (status & I2C_STAT_RRDY) { + *value = inw (I2C_DATA); + udelay (20000); + } else { + i2c_error = 1; + } + + if (!i2c_error) { + outw (I2C_CON_EN, I2C_CON); + while (inw (I2C_STAT) + || (inw (I2C_CON) & I2C_CON_MST)) { + udelay (10000); + outw (0xFFFF, I2C_STAT); + } + } + } + flush_fifo(); + outw (0xFFFF, I2C_STAT); + outw (0, I2C_CNT); + return i2c_error; +} + +static int i2c_write_byte (u8 devaddr, u8 regoffset, u8 value) +{ + int i2c_error = 0; + u16 status, stat; + + /* wait until bus not busy */ + wait_for_bb (); + + /* two bytes */ + outw (2, I2C_CNT); + /* set slave address */ + outw (devaddr, I2C_SA); + /* stop bit needed here */ + outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX | + I2C_CON_STP, I2C_CON); + + /* wait until state change */ + status = wait_for_pin (); + + if (status & I2C_STAT_XRDY) { + /* send out two bytes */ + outw ((value << 8) + regoffset, I2C_DATA); + /* must have enough delay to allow BB bit to go low */ + udelay (50000); + if (inw (I2C_STAT) & I2C_STAT_NACK) { + i2c_error = 1; + } + } else { + i2c_error = 1; + } + + if (!i2c_error) { + outw (I2C_CON_EN, I2C_CON); + while ((stat = inw (I2C_STAT)) || (inw (I2C_CON) & I2C_CON_MST)) { + udelay (1000); + /* have to read to clear intrrupt */ + outw (0xFFFF, I2C_STAT); + } + } + flush_fifo(); + outw (0xFFFF, I2C_STAT); + outw (0, I2C_CNT); + return i2c_error; +} + +void flush_fifo(void) +{ u16 stat; + + /* note: if you try and read data when its not there or ready + * you get a bus error + */ + while(1){ + stat = inw(I2C_STAT); + if(stat == I2C_STAT_RRDY){ + inw(I2C_DATA); + outw(I2C_STAT_RRDY,I2C_STAT); + udelay(1000); + }else + break; + } +} + +int i2c_probe (uchar chip) +{ + int res = 1; /* default = fail */ + + if (chip == inw (I2C_OA)) { + return res; + } + + /* wait until bus not busy */ + wait_for_bb (); + + /* try to read one byte */ + outw (1, I2C_CNT); + /* set slave address */ + outw (chip, I2C_SA); + /* stop bit needed here */ + outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP, I2C_CON); + /* enough delay for the NACK bit set */ + udelay (50000); + + if (!(inw (I2C_STAT) & I2C_STAT_NACK)) { + res = 0; /* success case */ + flush_fifo(); + outw(0xFFFF, I2C_STAT); + } else { + outw(0xFFFF, I2C_STAT); /* failue, clear sources*/ + outw (inw (I2C_CON) | I2C_CON_STP, I2C_CON); /* finish up xfer */ + udelay(20000); + wait_for_bb (); + } + flush_fifo(); + outw (0, I2C_CNT); /* don't allow any more data in...we don't want it.*/ + outw(0xFFFF, I2C_STAT); + return res; +} + +int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len) +{ + int i; + + if (alen > 1) { + printf ("I2C read: addr len %d not supported\n", alen); + return 1; + } + + if (addr + len > 256) { + printf ("I2C read: address out of range\n"); + return 1; + } + + for (i = 0; i < len; i++) { + if (i2c_read_byte (chip, addr + i, &buffer[i])) { + printf ("I2C read: I/O error\n"); + i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); + return 1; + } + } + + return 0; +} + +int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len) +{ + int i; + + if (alen > 1) { + printf ("I2C read: addr len %d not supported\n", alen); + return 1; + } + + if (addr + len > 256) { + printf ("I2C read: address out of range\n"); + return 1; + } + + for (i = 0; i < len; i++) { + if (i2c_write_byte (chip, addr + i, buffer[i])) { + printf ("I2C read: I/O error\n"); + i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); + return 1; + } + } + + return 0; +} + +static void wait_for_bb (void) +{ + int timeout = 10; + u16 stat; + + outw(0xFFFF, I2C_STAT); /* clear current interruts...*/ + while ((stat = inw (I2C_STAT) & I2C_STAT_BB) && timeout--) { + outw (stat, I2C_STAT); + udelay (50000); + } + + if (timeout <= 0) { + printf ("timed out in wait_for_bb: I2C_STAT=%x\n", + inw (I2C_STAT)); + } + outw(0xFFFF, I2C_STAT); /* clear delayed stuff*/ +} + +static u16 wait_for_pin (void) +{ + u16 status; + int timeout = 10; + + do { + udelay (1000); + status = inw (I2C_STAT); + } while ( !(status & + (I2C_STAT_ROVR | I2C_STAT_XUDF | I2C_STAT_XRDY | + I2C_STAT_RRDY | I2C_STAT_ARDY | I2C_STAT_NACK | + I2C_STAT_AL)) && timeout--); + + if (timeout <= 0) { + printf ("timed out in wait_for_pin: I2C_STAT=%x\n", + inw (I2C_STAT)); + outw(0xFFFF, I2C_STAT); +} + return status; +} + +#endif /* CONFIG_DRIVER_OMAP24XX_I2C */ diff --git a/drivers/serial.c b/drivers/serial.c index f5b51d6b7c..b13b05e115 100644 --- a/drivers/serial.c +++ b/drivers/serial.c @@ -59,7 +59,14 @@ static int calc_divisor (void) return (26); /* return 26 for base divisor */ } #endif - return (CFG_NS16550_CLK / 16 / gd->baudrate); + +#ifdef CONFIG_APTIX +#define MODE_X_DIV 13 +#else +#define MODE_X_DIV 16 +#endif + return (CFG_NS16550_CLK / MODE_X_DIV / gd->baudrate); + } int serial_init (void) diff --git a/include/asm-arm/arch-arm1136/bits.h b/include/asm-arm/arch-arm1136/bits.h new file mode 100644 index 0000000000..dc3273e2d5 --- /dev/null +++ b/include/asm-arm/arch-arm1136/bits.h @@ -0,0 +1,49 @@ +/* bits.h + * Copyright (c) 2004 Texas Instruments + * + * This package is free software; you can redistribute it and/or + * modify it under the terms of the license found in the file + * named COPYING that should have accompanied this file. + * + * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. + */ +#ifndef __bits_h +#define __bits_h 1 + +#define BIT0 (1<<0) +#define BIT1 (1<<1) +#define BIT2 (1<<2) +#define BIT3 (1<<3) +#define BIT4 (1<<4) +#define BIT5 (1<<5) +#define BIT6 (1<<6) +#define BIT7 (1<<7) +#define BIT8 (1<<8) +#define BIT9 (1<<9) +#define BIT10 (1<<10) +#define BIT11 (1<<11) +#define BIT12 (1<<12) +#define BIT13 (1<<13) +#define BIT14 (1<<14) +#define BIT15 (1<<15) +#define BIT16 (1<<16) +#define BIT17 (1<<17) +#define BIT18 (1<<18) +#define BIT19 (1<<19) +#define BIT20 (1<<20) +#define BIT21 (1<<21) +#define BIT22 (1<<22) +#define BIT23 (1<<23) +#define BIT24 (1<<24) +#define BIT25 (1<<25) +#define BIT26 (1<<26) +#define BIT27 (1<<27) +#define BIT28 (1<<28) +#define BIT29 (1<<29) +#define BIT30 (1<<30) +#define BIT31 (1<<31) + +#endif + diff --git a/include/asm-arm/arch-arm1136/clocks.h b/include/asm-arm/arch-arm1136/clocks.h new file mode 100644 index 0000000000..d94fdcf574 --- /dev/null +++ b/include/asm-arm/arch-arm1136/clocks.h @@ -0,0 +1,79 @@ +/* + * (C) Copyright 2004 + * Texas Instruments, + * Richard Woodruff + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _OMAP24XX_CLOCKS_H_ +#define _OMAP24XX_CLOCKS_H_ + +#define COMMIT_DIVIDERS 0x1 + +#define MODE_BYPASS_FAST 0x2 +#define APLL_LOCK 0xc +#ifdef CONFIG_APTIX +#define DPLL_LOCK 0x1 /* stay in bypass mode */ +#else +#define DPLL_LOCK 0x3 /* DPLL lock */ +#endif + +/****************************************************************************; +; PRCM Scheme II +; +; Enable clocks and DPLL for: +; DPLL=300, DPLLout=600 M=1,N=50 CM_CLKSEL1_PLL[21:8] 12/2*50 +; Core=600 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0] +; MPUF=300 (mpu domain) 2 CM_CLKSEL_MPU[4:0] +; DSPF=200 (dsp domain) 3 CM_CLKSEL_DSP[4:0] +; DSPI=100 6 CM_CLKSEL_DSP[6:5] +; DSP_S bypass CM_CLKSEL_DSP[7] +; IVAF=200 (dsp domain) 3 CM_CLKSEL_DSP[12:8] +; IVAF=100 auto +; IVAI auto +; IVA_MPU auto +; IVA_S bypass CM_CLKSEL_DSP[13] +; GFXF=50 (gfx domain) 12 CM_CLKSEL_FGX[2:0] +; SSI_SSRF=200 3 CM_CLKSEL1_CORE[24:20] +; SSI_SSTF=100 auto +; L3=100Mhz (sdram) 6 CM_CLKSEL1_CORE[4:0] +; L4=100Mhz 6 +; C_L4_USB=50 12 CM_CLKSEL1_CORE[6:5] +***************************************************************************/ +#define II_DPLL_OUT_X2 0x2 /* x2 core out */ +#define II_MPU_DIV 0x2 /* mpu = core/2 */ +#define II_DSP_DIV 0x343 /* dsp & iva divider */ +#define II_GFX_DIV 0x2 +#define II_BUS_DIV 0x04600C26 +#define II_BUS_DIV_ES1 0x04601026 +#define II_DPLL_300 0x01832100 + +/* set defaults for boot up */ +#ifdef PRCM_CONFIG_II +#define DPLL_OUT II_DPLL_OUT_X2 +#define MPU_DIV II_MPU_DIV +#define DSP_DIV II_DSP_DIV +#define GFX_DIV II_GFX_DIV +#define BUS_DIV II_BUS_DIV +#define BUS_DIV_ES1 II_BUS_DIV_ES1 +#define DPLL_VAL II_DPLL_300 +#endif + +/* lock delay time out */ +#define LDELAY 12000000 + +#endif + diff --git a/include/asm-arm/arch-arm1136/i2c.h b/include/asm-arm/arch-arm1136/i2c.h new file mode 100644 index 0000000000..3e37f4dab0 --- /dev/null +++ b/include/asm-arm/arch-arm1136/i2c.h @@ -0,0 +1,106 @@ +/* + * (C) Copyright 2004 + * Texas Instruments, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _OMAP24XX_I2C_H_ +#define _OMAP24XX_I2C_H_ + +#define I2C_BASE 0x48070000 +#define I2C_BASE2 0x48072000 /* nothing hooked up on h4 */ + +#define I2C_REV (I2C_BASE + 0x00) +#define I2C_IE (I2C_BASE + 0x04) +#define I2C_STAT (I2C_BASE + 0x08) +#define I2C_IV (I2C_BASE + 0x0c) +#define I2C_BUF (I2C_BASE + 0x14) +#define I2C_CNT (I2C_BASE + 0x18) +#define I2C_DATA (I2C_BASE + 0x1c) +#define I2C_CON (I2C_BASE + 0x24) +#define I2C_OA (I2C_BASE + 0x28) +#define I2C_SA (I2C_BASE + 0x2c) +#define I2C_PSC (I2C_BASE + 0x30) +#define I2C_SCLL (I2C_BASE + 0x34) +#define I2C_SCLH (I2C_BASE + 0x38) +#define I2C_SYSTEST (I2C_BASE + 0x3c) + +/* I2C masks */ + +/* I2C Interrupt Enable Register (I2C_IE): */ +#define I2C_IE_GC_IE (1 << 5) +#define I2C_IE_XRDY_IE (1 << 4) /* Transmit data ready interrupt enable */ +#define I2C_IE_RRDY_IE (1 << 3) /* Receive data ready interrupt enable */ +#define I2C_IE_ARDY_IE (1 << 2) /* Register access ready interrupt enable */ +#define I2C_IE_NACK_IE (1 << 1) /* No acknowledgment interrupt enable */ +#define I2C_IE_AL_IE (1 << 0) /* Arbitration lost interrupt enable */ + +/* I2C Status Register (I2C_STAT): */ + +#define I2C_STAT_SBD (1 << 15) /* Single byte data */ +#define I2C_STAT_BB (1 << 12) /* Bus busy */ +#define I2C_STAT_ROVR (1 << 11) /* Receive overrun */ +#define I2C_STAT_XUDF (1 << 10) /* Transmit underflow */ +#define I2C_STAT_AAS (1 << 9) /* Address as slave */ +#define I2C_STAT_GC (1 << 5) +#define I2C_STAT_XRDY (1 << 4) /* Transmit data ready */ +#define I2C_STAT_RRDY (1 << 3) /* Receive data ready */ +#define I2C_STAT_ARDY (1 << 2) /* Register access ready */ +#define I2C_STAT_NACK (1 << 1) /* No acknowledgment interrupt enable */ +#define I2C_STAT_AL (1 << 0) /* Arbitration lost interrupt enable */ + + +/* I2C Interrupt Code Register (I2C_INTCODE): */ + +#define I2C_INTCODE_MASK 7 +#define I2C_INTCODE_NONE 0 +#define I2C_INTCODE_AL 1 /* Arbitration lost */ +#define I2C_INTCODE_NAK 2 /* No acknowledgement/general call */ +#define I2C_INTCODE_ARDY 3 /* Register access ready */ +#define I2C_INTCODE_RRDY 4 /* Rcv data ready */ +#define I2C_INTCODE_XRDY 5 /* Xmit data ready */ + +/* I2C Buffer Configuration Register (I2C_BUF): */ + +#define I2C_BUF_RDMA_EN (1 << 15) /* Receive DMA channel enable */ +#define I2C_BUF_XDMA_EN (1 << 7) /* Transmit DMA channel enable */ + +/* I2C Configuration Register (I2C_CON): */ + +#define I2C_CON_EN (1 << 15) /* I2C module enable */ +#define I2C_CON_BE (1 << 14) /* Big endian mode */ +#define I2C_CON_STB (1 << 11) /* Start byte mode (master mode only) */ +#define I2C_CON_MST (1 << 10) /* Master/slave mode */ +#define I2C_CON_TRX (1 << 9) /* Transmitter/receiver mode (master mode only) */ +#define I2C_CON_XA (1 << 8) /* Expand address */ +#define I2C_CON_STP (1 << 1) /* Stop condition (master mode only) */ +#define I2C_CON_STT (1 << 0) /* Start condition (master mode only) */ + +/* I2C System Test Register (I2C_SYSTEST): */ + +#define I2C_SYSTEST_ST_EN (1 << 15) /* System test enable */ +#define I2C_SYSTEST_FREE (1 << 14) /* Free running mode (on breakpoint) */ +#define I2C_SYSTEST_TMODE_MASK (3 << 12) /* Test mode select */ +#define I2C_SYSTEST_TMODE_SHIFT (12) /* Test mode select */ +#define I2C_SYSTEST_SCL_I (1 << 3) /* SCL line sense input value */ +#define I2C_SYSTEST_SCL_O (1 << 2) /* SCL line drive output value */ +#define I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense input value */ +#define I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive output value */ + +#endif diff --git a/include/asm-arm/arch-arm1136/mem.h b/include/asm-arm/arch-arm1136/mem.h new file mode 100644 index 0000000000..bd6fd50221 --- /dev/null +++ b/include/asm-arm/arch-arm1136/mem.h @@ -0,0 +1,119 @@ +/* + * (C) Copyright 2004 + * Texas Instruments, + * Richard Woodruff + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _OMAP24XX_MEM_H_ +#define _OMAP24XX_MEM_H_ + +#define SDRC_CS0_OSET 0x0 +#define SDRC_CS1_OSET 0x30 /* mirror CS1 regs appear offset 0x30 from CS0 */ + +#ifndef __ASSEMBLY__ +/* struct's for holding data tables for current boards, they are getting used + early in init when NO global access are there */ +struct sdrc_data_s { + u32 sdrc_sharing; + u32 sdrc_mdcfg_0; + u32 sdrc_actim_ctrla_0; + u32 sdrc_actim_ctrlb_0; + u32 sdrc_rfr_ctrl; + u32 sdrc_mr_0; + u32 sdrc_dlla_ctrl; + u32 sdrc_dllb_ctrl; +} /*__attribute__ ((packed))*/; +typedef struct sdrc_data_s sdrc_data_t; +#endif + +/* Slower full frequency range default timings for x32 operation*/ +#define H4_2420_SDRC_SHARING 0x00000100 +#define H4_2420_SDRC_MDCFG_0 0x01702011 +#define H4_2420_SDRC_ACTIM_CTRLA_0 0x9bead909 +#define H4_2420_SDRC_ACTIM_CTRLB_0 0x00000014 +#define H4_2420_SDRC_RFR_CTRL_ES1 0x00002401 +#define H4_2420_SDRC_RFR_CTRL 0x0002da01 +#define H4_2420_SDRC_MR_0 0x00000032 +#define H4_2420_SDRC_DLLA_CTRL 0x00007307 +#define H4_2420_SDRC_DLLB_CTRL 0x00007307 + +#define H4_2422_SDRC_SHARING 0x00004b00 +#define H4_2422_SDRC_MDCFG_0 0x00801011 +#define H4_2422_SDRC_ACTIM_CTRLA_0 0x9BEAD909 +#define H4_2422_SDRC_ACTIM_CTRLB_0 0x00000020 +#define H4_2422_SDRC_RFR_CTRL_ES1 0x00002401 +#define H4_2422_SDRC_RFR_CTRL 0x0002da03 +#define H4_2422_SDRC_MR_0 0x00000032 +#define H4_2422_SDRC_DLLA_CTRL 0x00007307 +#define H4_2422_SDRC_DLLB_CTRL 0x00007307 + +#define H4_2420_COMBO_MDCFG_0 0x00801011 + +/* optimized timings */ +#define H4_2420_SDRC_ACTIM_CTRLA_0_100MHz 0x5A59B485 +#define H4_2420_SDRC_ACTIM_CTRLB_0_100MHz 0x0000000e + + +#ifdef PRCM_CONFIG_II /* L3 at 100MHz */ +#define H4_24XX_GPMC_CONFIG1_0 0x3 +#define H4_24XX_GPMC_CONFIG2_0 0x001f1f01 +#define H4_24XX_GPMC_CONFIG3_0 0x00030301 +#define H4_24XX_GPMC_CONFIG4_0 0x0C030C03 +#define H4_24XX_GPMC_CONFIG5_0 0x01131F1F +#define H4_24XX_GPMC_CONFIG7_0 (0x00000C40|(H4_CS0_BASE >> 24)) + +#define H4_24XX_GPMC_CONFIG1_1 0x00011000 +#define H4_24XX_GPMC_CONFIG2_1 0x001F1F00 +#define H4_24XX_GPMC_CONFIG3_1 0x00080802 +#define H4_24XX_GPMC_CONFIG4_1 0x1C091C09 +#define H4_24XX_GPMC_CONFIG5_1 0x031A1F1F +#define H4_24XX_GPMC_CONFIG6_1 0x000003C2 +#define H4_24XX_GPMC_CONFIG7_1 (0x00000F40|(H4_CS1_BASE >> 24)) +#endif + +#ifdef PRCM_CONFIG_III /* L3 at 133MHz */ +#define H4_24XX_GPMC_CONFIG1_0 0x3 +#define H4_24XX_GPMC_CONFIG2_0 0x001f1f01 +#define H4_24XX_GPMC_CONFIG3_0 0x001F1F00 +#define H4_24XX_GPMC_CONFIG4_0 0x16061606 +#define H4_24XX_GPMC_CONFIG5_0 0x01131F1F +#define H4_24XX_GPMC_CONFIG7_0 (0x00000C40|(H4_CS0_BASE >> 24)) + +#define H4_24XX_GPMC_CONFIG1_1 0x00011000 +#define H4_24XX_GPMC_CONFIG2_1 0x001f1f01 +#define H4_24XX_GPMC_CONFIG3_1 0x001F1F00 +#define H4_24XX_GPMC_CONFIG4_1 0x1A061A06 +#define H4_24XX_GPMC_CONFIG5_1 0x041F1F1F +#define H4_24XX_GPMC_CONFIG6_1 0x000004C4 +#define H4_24XX_GPMC_CONFIG7_1 (0x00000F40|(H4_CS1_BASE >> 24)) +#endif + +#ifdef CONFIG_APTIX /* SDRC-SDR for Aptix x16 */ +#define VAL_H4_SDRC_SHARING_16 0x00002400 /* No-Tristate, 16bit on D31-D16, CS1=dont care */ +#define VAL_H4_SDRC_SHARING 0x00000100 +#define VAL_H4_SDRC_MCFG_0_16 0x00901000 /* SDR-SDRAM,External,x16 bit */ +#define VAL_H4_SDRC_MCFG_0 0x01702011 +#define VAL_H4_SDRC_MR_0 0x00000029 /* Burst=2, Serial Mode, CAS 3*/ +#define VAL_H4_SDRC_RFR_CTRL_0 0x00001703 /* refresh time */ +#define VAL_H4_SDRC_DCDL2_CTRL 0x5A59B485 +#endif + +#endif diff --git a/include/asm-arm/arch-arm1136/mux.h b/include/asm-arm/arch-arm1136/mux.h new file mode 100644 index 0000000000..67c8419086 --- /dev/null +++ b/include/asm-arm/arch-arm1136/mux.h @@ -0,0 +1,158 @@ +/* + * (C) Copyright 2004 + * Texas Instruments, + * Richard Woodruff + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _OMAP2420_MUX_H_ +#define _OMAP2420_MUX_H_ + +#ifndef __ASSEMBLY__ +typedef unsigned char uint8; +typedef unsigned int uint32; + +void muxSetupSDRC(void); +void muxSetupGPMC(void); +void muxSetupUsb0(void); +void muxSetupUart3(void); +void muxSetupI2C1(void); +void muxSetupUART1(void); +void muxSetupLCD(void); +void muxSetupCamera(void); +void muxSetupMMCSD(void) ; +void muxSetupTouchScreen(void) ; +void muxSetupHDQ(void); +#endif + +#define USB_OTG_CTRL ((volatile uint32 *)0x4805E30C) + +/* Pin Muxing registers used for HDQ (Smart battery) */ +#define CONTROL_PADCONF_HDQ_SIO ((volatile unsigned char *)0x48000115) + +/* Pin Muxing registers used for GPMC */ +#define CONTROL_PADCONF_GPMC_D2_BYTE0 ((volatile unsigned char *)0x48000088) +#define CONTROL_PADCONF_GPMC_D2_BYTE1 ((volatile unsigned char *)0x48000089) +#define CONTROL_PADCONF_GPMC_D2_BYTE2 ((volatile unsigned char *)0x4800008A) +#define CONTROL_PADCONF_GPMC_D2_BYTE3 ((volatile unsigned char *)0x4800008B) + +#define CONTROL_PADCONF_GPMC_NCS0_BYTE0 ((volatile unsigned char *)0x4800008C) +#define CONTROL_PADCONF_GPMC_NCS0_BYTE1 ((volatile unsigned char *)0x4800008D) +#define CONTROL_PADCONF_GPMC_NCS0_BYTE2 ((volatile unsigned char *)0x4800008E) +#define CONTROL_PADCONF_GPMC_NCS0_BYTE3 ((volatile unsigned char *)0x4800008F) + +/* Pin Muxing registers used for SDRC */ +#define CONTROL_PADCONF_SDRC_NCS0_BYTE0 ((volatile unsigned char *)0x480000A0) +#define CONTROL_PADCONF_SDRC_NCS0_BYTE1 ((volatile unsigned char *)0x480000A1) +#define CONTROL_PADCONF_SDRC_NCS0_BYTE2 ((volatile unsigned char *)0x480000A2) +#define CONTROL_PADCONF_SDRC_NCS0_BYTE3 ((volatile unsigned char *)0x480000A3) + +#define CONTROL_PADCONF_SDRC_A14_BYTE0 ((volatile unsigned char *)0x48000030) +#define CONTROL_PADCONF_SDRC_A14_BYTE1 ((volatile unsigned char *)0x48000031) +#define CONTROL_PADCONF_SDRC_A14_BYTE2 ((volatile unsigned char *)0x48000032) +#define CONTROL_PADCONF_SDRC_A14_BYTE3 ((volatile unsigned char *)0x48000033) + +/* Pin Muxing registers used for Touch Screen (SPI) */ +#define CONTROL_PADCONF_SPI1_CLK ((volatile unsigned char *)0x480000FF) +#define CONTROL_PADCONF_SPI1_SIMO ((volatile unsigned char *)0x48000100) +#define CONTROL_PADCONF_SPI1_SOMI ((volatile unsigned char *)0x48000101) +#define CONTROL_PADCONF_SPI1_NCS0 ((volatile unsigned char *)0x48000102) + +#define CONTROL_PADCONF_MCBSP1_FSR ((volatile unsigned char *)0x4800010B) + +/* Pin Muxing registers used for MMCSD */ +#define CONTROL_PADCONF_MMC_CLKI ((volatile unsigned char *)0x480000FE) +#define CONTROL_PADCONF_MMC_CLKO ((volatile unsigned char *)0x480000F3) +#define CONTROL_PADCONF_MMC_CMD ((volatile unsigned char *)0x480000F4) +#define CONTROL_PADCONF_MMC_DAT0 ((volatile unsigned char *)0x480000F5) +#define CONTROL_PADCONF_MMC_DAT1 ((volatile unsigned char *)0x480000F6) +#define CONTROL_PADCONF_MMC_DAT2 ((volatile unsigned char *)0x480000F7) +#define CONTROL_PADCONF_MMC_DAT3 ((volatile unsigned char *)0x480000F8) +#define CONTROL_PADCONF_MMC_DAT_DIR0 ((volatile unsigned char *)0x480000F9) +#define CONTROL_PADCONF_MMC_DAT_DIR1 ((volatile unsigned char *)0x480000FA) +#define CONTROL_PADCONF_MMC_DAT_DIR2 ((volatile unsigned char *)0x480000FB) +#define CONTROL_PADCONF_MMC_DAT_DIR3 ((volatile unsigned char *)0x480000FC) +#define CONTROL_PADCONF_MMC_CMD_DIR ((volatile unsigned char *)0x480000FD) + +#define CONTROL_PADCONF_SDRC_A14 ((volatile unsigned char *)0x48000030) +#define CONTROL_PADCONF_SDRC_A13 ((volatile unsigned char *)0x48000031) + +/* Pin Muxing registers used for CAMERA */ +#define CONTROL_PADCONF_SYS_NRESWARM ((volatile unsigned char *)0x4800012B) + +#define CONTROL_PADCONF_CAM_XCLK ((volatile unsigned char *)0x480000DC) +#define CONTROL_PADCONF_CAM_LCLK ((volatile unsigned char *)0x480000DB) +#define CONTROL_PADCONF_CAM_VS ((volatile unsigned char *)0x480000DA) +#define CONTROL_PADCONF_CAM_HS ((volatile unsigned char *)0x480000D9) +#define CONTROL_PADCONF_CAM_D0 ((volatile unsigned char *)0x480000D8) +#define CONTROL_PADCONF_CAM_D1 ((volatile unsigned char *)0x480000D7) +#define CONTROL_PADCONF_CAM_D2 ((volatile unsigned char *)0x480000D6) +#define CONTROL_PADCONF_CAM_D3 ((volatile unsigned char *)0x480000D5) +#define CONTROL_PADCONF_CAM_D4 ((volatile unsigned char *)0x480000D4) +#define CONTROL_PADCONF_CAM_D5 ((volatile unsigned char *)0x480000D3) +#define CONTROL_PADCONF_CAM_D6 ((volatile unsigned char *)0x480000D2) +#define CONTROL_PADCONF_CAM_D7 ((volatile unsigned char *)0x480000D1) +#define CONTROL_PADCONF_CAM_D8 ((volatile unsigned char *)0x480000D0) +#define CONTROL_PADCONF_CAM_D9 ((volatile unsigned char *)0x480000CF) + +/* Pin Muxing registers used for LCD */ +#define CONTROL_PADCONF_DSS_D0 ((volatile unsigned char *)0x480000B3) +#define CONTROL_PADCONF_DSS_D1 ((volatile unsigned char *)0x480000B4) +#define CONTROL_PADCONF_DSS_D2 ((volatile unsigned char *)0x480000B5) +#define CONTROL_PADCONF_DSS_D3 ((volatile unsigned char *)0x480000B6) +#define CONTROL_PADCONF_DSS_D4 ((volatile unsigned char *)0x480000B7) +#define CONTROL_PADCONF_DSS_D5 ((volatile unsigned char *)0x480000B8) +#define CONTROL_PADCONF_DSS_D6 ((volatile unsigned char *)0x480000B9) +#define CONTROL_PADCONF_DSS_D7 ((volatile unsigned char *)0x480000BA) +#define CONTROL_PADCONF_DSS_D8 ((volatile unsigned char *)0x480000BB) +#define CONTROL_PADCONF_DSS_D9 ((volatile unsigned char *)0x480000BC) +#define CONTROL_PADCONF_DSS_D10 ((volatile unsigned char *)0x480000BD) +#define CONTROL_PADCONF_DSS_D11 ((volatile unsigned char *)0x480000BE) +#define CONTROL_PADCONF_DSS_D12 ((volatile unsigned char *)0x480000BF) +#define CONTROL_PADCONF_DSS_D13 ((volatile unsigned char *)0x480000C0) +#define CONTROL_PADCONF_DSS_D14 ((volatile unsigned char *)0x480000C1) +#define CONTROL_PADCONF_DSS_D15 ((volatile unsigned char *)0x480000C2) +#define CONTROL_PADCONF_DSS_D16 ((volatile unsigned char *)0x480000C3) +#define CONTROL_PADCONF_DSS_D17 ((volatile unsigned char *)0x480000C4) +#define CONTROL_PADCONF_DSS_PCLK ((volatile unsigned char *)0x480000CB) +#define CONTROL_PADCONF_DSS_VSYNC ((volatile unsigned char *)0x480000CC) +#define CONTROL_PADCONF_DSS_HSYNC ((volatile unsigned char *)0x480000CD) +#define CONTROL_PADCONF_DSS_ACBIAS ((volatile unsigned char *)0x480000CE) + +/* Pin Muxing registers used for UART1 */ +#define CONTROL_PADCONF_UART1_CTS ((volatile unsigned char *)0x480000C5) +#define CONTROL_PADCONF_UART1_RTS ((volatile unsigned char *)0x480000C6) +#define CONTROL_PADCONF_UART1_TX ((volatile unsigned char *)0x480000C7) +#define CONTROL_PADCONF_UART1_RX ((volatile unsigned char *)0x480000C8) + +/* Pin Muxing registers used for I2C1 */ +#define CONTROL_PADCONF_I2C1_SCL ((volatile unsigned char *)0x48000111) +#define CONTROL_PADCONF_I2C1_SDA ((volatile unsigned char *)0x48000112) + +/* Pin Muxing registres used for USB0. */ +#define CONTROL_PADCONF_USB0_PUEN ((volatile uint8 *)0x4800011D) +#define CONTROL_PADCONF_USB0_VP ((volatile uint8 *)0x4800011E) +#define CONTROL_PADCONF_USB0_VM ((volatile uint8 *)0x4800011F) +#define CONTROL_PADCONF_USB0_RCV ((volatile uint8 *)0x48000120) +#define CONTROL_PADCONF_USB0_TXEN ((volatile uint8 *)0x48000121) +#define CONTROL_PADCONF_USB0_SE0 ((volatile uint8 *)0x48000122) +#define CONTROL_PADCONF_USB0_DAT ((volatile uint8 *)0x48000123) + +/* Pin Muxing registers used for UART3/IRDA */ +#define CONTROL_PADCONF_UART3_TX_IRTX ((volatile uint8 *)0x48000118) +#define CONTROL_PADCONF_UART3_RX_IRRX ((volatile uint8 *)0x48000119) + +#endif diff --git a/include/asm-arm/arch-arm1136/omap2420.h b/include/asm-arm/arch-arm1136/omap2420.h new file mode 100644 index 0000000000..ae2549b4be --- /dev/null +++ b/include/asm-arm/arch-arm1136/omap2420.h @@ -0,0 +1,200 @@ +/* + * (C) Copyright 2004 + * Texas Instruments, + * Richard Woodruff + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _OMAP2420_SYS_H_ +#define _OMAP2420_SYS_H_ + +#include + +/* + * 2420 specific Section + */ + +/* CONTROL */ +#define OMAP2420_CTRL_BASE (0x48000000) +#define CONTROL_STATUS (OMAP2420_CTRL_BASE + 0x2F8) + +/* TAP information */ +#define OMAP2420_TAP_BASE (0x48014000) +#define TAP_IDCODE_REG (OMAP2420_TAP_BASE+0x204) + +/* GPMC */ +#define OMAP2420_GPMC_BASE (0x6800A000) +#define GPMC_SYSCONFIG (OMAP2420_GPMC_BASE+0x10) +#define GPMC_IRQENABLE (OMAP2420_GPMC_BASE+0x1C) +#define GPMC_TIMEOUT_CONTROL (OMAP2420_GPMC_BASE+0x40) +#define GPMC_CONFIG (OMAP2420_GPMC_BASE+0x50) +#define GPMC_CONFIG1_0 (OMAP2420_GPMC_BASE+0x60) +#define GPMC_CONFIG2_0 (OMAP2420_GPMC_BASE+0x64) +#define GPMC_CONFIG3_0 (OMAP2420_GPMC_BASE+0x68) +#define GPMC_CONFIG4_0 (OMAP2420_GPMC_BASE+0x6C) +#define GPMC_CONFIG5_0 (OMAP2420_GPMC_BASE+0x70) +#define GPMC_CONFIG7_0 (OMAP2420_GPMC_BASE+0x78) +#define GPMC_CONFIG1_1 (OMAP2420_GPMC_BASE+0x90) +#define GPMC_CONFIG2_1 (OMAP2420_GPMC_BASE+0x94) +#define GPMC_CONFIG3_1 (OMAP2420_GPMC_BASE+0x98) +#define GPMC_CONFIG4_1 (OMAP2420_GPMC_BASE+0x9C) +#define GPMC_CONFIG5_1 (OMAP2420_GPMC_BASE+0xA0) +#define GPMC_CONFIG6_1 (OMAP2420_GPMC_BASE+0xA4) +#define GPMC_CONFIG7_1 (OMAP2420_GPMC_BASE+0xA8) + +/* SMS */ +#define OMAP2420_SMS_BASE 0x68008000 +#define SMS_SYSCONFIG (OMAP2420_SMS_BASE+0x10) + +/* SDRC */ +#define OMAP2420_SDRC_BASE 0x68009000 +#define SDRC_SYSCONFIG (OMAP2420_SDRC_BASE+0x10) +#define SDRC_STATUS (OMAP2420_SDRC_BASE+0x14) +#define SDRC_SHARING (OMAP2420_SDRC_BASE+0x44) +#define SDRC_DLLA_CTRL (OMAP2420_SDRC_BASE+0x60) +#define SDRC_DLLB_CTRL (OMAP2420_SDRC_BASE+0x68) +#define SDRC_POWER (OMAP2420_SDRC_BASE+0x70) +#define SDRC_MCFG_0 (OMAP2420_SDRC_BASE+0x80) +#define SDRC_MR_0 (OMAP2420_SDRC_BASE+0x84) +#define SDRC_ACTIM_CTRLA_0 (OMAP2420_SDRC_BASE+0x9C) +#define SDRC_ACTIM_CTRLB_0 (OMAP2420_SDRC_BASE+0xA0) +#define SDRC_ACTIM_CTRLA_1 (OMAP2420_SDRC_BASE+0xC4) +#define SDRC_ACTIM_CTRLB_1 (OMAP2420_SDRC_BASE+0xC8) +#define SDRC_RFR_CTRL (OMAP2420_SDRC_BASE+0xA4) +#define SDRC_MANUAL_0 (OMAP2420_SDRC_BASE+0xA8) +#define OMAP2420_SDRC_CS0 0x80000000 +#define OMAP2420_SDRC_CS1 0xA0000000 +#define CMD_NOP 0x0 +#define CMD_PRECHARGE 0x1 +#define CMD_AUTOREFRESH 0x2 +#define CMD_ENTR_PWRDOWN 0x3 +#define CMD_EXIT_PWRDOWN 0x4 +#define CMD_ENTR_SRFRSH 0x5 +#define CMD_CKE_HIGH 0x6 +#define CMD_CKE_LOW 0x7 +#define SOFTRESET BIT1 +#define SMART_IDLE (0x2 << 3) +#define REF_ON_IDLE (0x1 << 6) + + +/* UART */ +#define OMAP2420_UART1 0x4806A000 +#define OMAP2420_UART2 0x4806C000 +#define OMAP2420_UART3 0x4806E000 + +/* General Purpose Timers */ +#define OMAP2420_GPT1 0x48028000 +#define OMAP2420_GPT2 0x4802A000 +#define OMAP2420_GPT3 0x48078000 +#define OMAP2420_GPT4 0x4807A000 +#define OMAP2420_GPT5 0x4807C000 +#define OMAP2420_GPT6 0x4807E000 +#define OMAP2420_GPT7 0x48080000 +#define OMAP2420_GPT8 0x48082000 +#define OMAP2420_GPT9 0x48084000 +#define OMAP2420_GPT10 0x48086000 +#define OMAP2420_GPT11 0x48088000 +#define OMAP2420_GPT12 0x4808A000 + +/* timer regs offsets (32 bit regs) */ +#define TIDR 0x0 /* r */ +#define TIOCP_CFG 0x10 /* rw */ +#define TISTAT 0x14 /* r */ +#define TISR 0x18 /* rw */ +#define TIER 0x1C /* rw */ +#define TWER 0x20 /* rw */ +#define TCLR 0x24 /* rw */ +#define TCRR 0x28 /* rw */ +#define TLDR 0x2C /* rw */ +#define TTGR 0x30 /* rw */ +#define TWPS 0x34 /* r */ +#define TMAR 0x38 /* rw */ +#define TCAR1 0x3c /* r */ +#define TSICR 0x40 /* rw */ +#define TCAR2 0x44 /* r */ + +/* WatchDog Timers (1 secure, 3 GP) */ +#define WD1_BASE 0x48020000 +#define WD2_BASE 0x48022000 +#define WD3_BASE 0x48024000 +#define WD4_BASE 0x48026000 +#define WWPS 0x34 /* r */ +#define WSPR 0x48 /* rw */ +#define WD_UNLOCK1 0xAAAA +#define WD_UNLOCK2 0x5555 + +/* PRCM */ +#define OMAP2420_CM_BASE 0x48008000 +#define PRCM_CLKCFG_CTRL (OMAP2420_CM_BASE+0x080) +#define CM_CLKSEL_MPU (OMAP2420_CM_BASE+0x140) +#define CM_FCLKEN1_CORE (OMAP2420_CM_BASE+0x200) +#define CM_FCLKEN2_CORE (OMAP2420_CM_BASE+0x204) +#define CM_ICLKEN1_CORE (OMAP2420_CM_BASE+0x210) +#define CM_ICLKEN2_CORE (OMAP2420_CM_BASE+0x214) +#define CM_CLKSEL1_CORE (OMAP2420_CM_BASE+0x240) +#define CM_CLKSEL_WKUP (OMAP2420_CM_BASE+0x440) +#define CM_CLKSEL2_CORE (OMAP2420_CM_BASE+0x244) +#define CM_CLKSEL_GFX (OMAP2420_CM_BASE+0x340) +#define PM_RSTCTRL_WKUP (OMAP2420_CM_BASE+0x450) +#define CM_CLKEN_PLL (OMAP2420_CM_BASE+0x500) +#define CM_IDLEST_CKGEN (OMAP2420_CM_BASE+0x520) +#define CM_CLKSEL1_PLL (OMAP2420_CM_BASE+0x540) +#define CM_CLKSEL2_PLL (OMAP2420_CM_BASE+0x544) +#define CM_CLKSEL_DSP (OMAP2420_CM_BASE+0x840) + +/* + * H4 specific Section + */ + +/* + * The 2420's chip selects are programmable. The mask ROM + * does configure CS0 to 0x08000000 before dispatch. So, if + * you want your code to live below that address, you have to + * be prepared to jump though hoops, to reset the base address. + */ +#if defined(CONFIG_OMAP2420H4) +/* GPMC */ +#ifdef CONFIG_VIRTIO_A /* Pre version B */ +# define H4_CS0_BASE 0x08000000 /* flash (64 Meg aligned) */ +# define H4_CS1_BASE 0x04000000 /* debug board */ +# define H4_CS2_BASE 0x0A000000 /* wifi board */ +#else +# define H4_CS0_BASE 0x04000000 /* flash (64 Meg aligned) */ +# define H4_CS1_BASE 0x08000000 /* debug board */ +# define H4_CS2_BASE 0x0A000000 /* wifi board */ +#endif + +/* base address for indirect vectors (internal boot mode) */ +#define SRAM_OFFSET0 0x40000000 +#define SRAM_OFFSET1 0x00200000 +#define SRAM_OFFSET2 0x0000F800 +#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2) + +#define LOW_LEVEL_SRAM_STACK 0x4020FFFC + +#define PERIFERAL_PORT_BASE 0x480FE003 + +/* FPGA on Debug board.*/ +#define ETH_CONTROL_REG (H4_CS1_BASE+0x30b) +#define LAN_RESET_REGISTER (H4_CS1_BASE+0x1c) +#endif /* endif CONFIG_2420H4 */ + +#endif + diff --git a/include/asm-arm/arch-arm1136/rev.h b/include/asm-arm/arch-arm1136/rev.h new file mode 100644 index 0000000000..0dba25f7dd --- /dev/null +++ b/include/asm-arm/arch-arm1136/rev.h @@ -0,0 +1,59 @@ +/* + * (C) Copyright 2004 + * Texas Instruments, + * Richard Woodruff + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _OMAP24XX_REV_H_ +#define _OMAP24XX_REV_H_ + +typedef struct h4_system_data { + /* base board info */ + u32 base_b_rev; /* rev from base board i2c */ + /* cpu board info */ + u32 cpu_b_rev; /* rev from cpu board i2c */ + u32 cpu_b_mux; /* mux type on daughter board */ + u32 cpu_b_ddr_type; /* mem type */ + u32 cpu_b_ddr_speed; /* ddr speed rating */ + u32 cpu_b_switches; /* boot ctrl switch settings */ + /* cpu info */ + u32 cpu_type; /* type of cpu; 2420, 2422, 2430,...*/ + u32 cpu_rev; /* rev of given cpu; ES1, ES2,...*/ +} h4_sys_data; + +#define CDB_DDR_COMBO /* combo part on cpu daughter card */ +#define CDB_DDR_IPDB /* 2x16 parts on daughter card */ + +#define DDR_100 100 /* type found on most mem d-boards */ +#define DDR_111 111 /* some combo parts */ +#define DDR_133 133 /* most combo, some mem d-boards */ +#define DDR_165 165 /* future parts */ + +#define CPU_2420 0x2420 +#define CPU_2422 0x2422 + +#define CPU_2422_ES1 1 +#define CPU_2422_ES2 2 +#define CPU_2420_ES1 1 +#define CPU_2420_ES2 2 + +#endif + diff --git a/include/asm-arm/arch-arm1136/sizes.h b/include/asm-arm/arch-arm1136/sizes.h new file mode 100644 index 0000000000..3dddd8e2e3 --- /dev/null +++ b/include/asm-arm/arch-arm1136/sizes.h @@ -0,0 +1,50 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* Size defintions + * Copyright (C) ARM Limited 1998. All rights reserved. + */ + +#ifndef __sizes_h +#define __sizes_h 1 + +/* handy sizes */ +#define SZ_1K 0x00000400 +#define SZ_4K 0x00001000 +#define SZ_8K 0x00002000 +#define SZ_16K 0x00004000 +#define SZ_32K 0x00008000 +#define SZ_64K 0x00010000 +#define SZ_128K 0x00020000 +#define SZ_256K 0x00040000 +#define SZ_512K 0x00080000 + +#define SZ_1M 0x00100000 +#define SZ_2M 0x00200000 +#define SZ_4M 0x00400000 +#define SZ_8M 0x00800000 +#define SZ_16M 0x01000000 +#define SZ_31M 0x01F00000 +#define SZ_32M 0x02000000 +#define SZ_64M 0x04000000 +#define SZ_128M 0x08000000 +#define SZ_256M 0x10000000 +#define SZ_512M 0x20000000 + +#define SZ_1G 0x40000000 +#define SZ_2G 0x80000000 + +#endif /* __sizes_h */ + diff --git a/include/asm-arm/arch-arm1136/sys_info.h b/include/asm-arm/arch-arm1136/sys_info.h new file mode 100644 index 0000000000..3f77d3bfa7 --- /dev/null +++ b/include/asm-arm/arch-arm1136/sys_info.h @@ -0,0 +1,78 @@ +/* + * (C) Copyright 2004 + * Texas Instruments, + * Richard Woodruff + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _OMAP24XX_SYS_INFO_H_ +#define _OMAP24XX_SYS_INFO_H_ + +typedef struct h4_system_data { + /* base board info */ + u32 base_b_rev; /* rev from base board i2c */ + /* cpu board info */ + u32 cpu_b_rev; /* rev from cpu board i2c */ + u32 cpu_b_mux; /* mux type on daughter board */ + u32 cpu_b_ddr_type; /* mem type */ + u32 cpu_b_ddr_speed; /* ddr speed rating */ + u32 cpu_b_switches; /* boot ctrl switch settings */ + /* cpu info */ + u32 cpu_type; /* type of cpu; 2420, 2422, 2430,...*/ + u32 cpu_rev; /* rev of given cpu; ES1, ES2,...*/ +} h4_sys_data; + +#define DDR_STACKED 3 /* stacked part on 2422 */ +#define DDR_COMBO 2 /* combo part on cpu daughter card (menalaeus) */ +#define DDR_DISCRETE 1 /* 2x16 parts on daughter card */ + +#define DDR_100 100 /* type found on most mem d-boards */ +#define DDR_111 111 /* some combo parts */ +#define DDR_133 133 /* most combo, some mem d-boards */ +#define DDR_165 165 /* future parts */ + +#define CPU_2420 0x2420 +#define CPU_2422 0x2422 + +#define CPU_2422_ES1 1 +#define CPU_2422_ES2 2 +#define CPU_2420_ES1 1 +#define CPU_2420_ES2 2 + +#define CPU_2420_CHIPID 0x0B5D9000 +#define CPU_24XX_ID_MASK 0x0FFFF000 +#define CPU_242X_REV_MASK 0xF0000000 + +#define BOARD_H4_MENELAUS 1 +#define BOARD_H4_SDP 2 + +#define GPMC_MUXED 1 +#define GPMC_NONMUXED 0 + +#define TYPE_NAND 0x800 /* bit pos for nand in gpmc reg */ +#define TYPE_NOR 0x000 + +#define WIDTH_8BIT 0x0000 +#define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */ + +#define I2C_MENELAUS 0x72 /* i2c id for companion chip */ + +#endif + diff --git a/include/asm-arm/arch-arm1136/sys_proto.h b/include/asm-arm/arch-arm1136/sys_proto.h new file mode 100644 index 0000000000..67206f621c --- /dev/null +++ b/include/asm-arm/arch-arm1136/sys_proto.h @@ -0,0 +1,48 @@ +/* + * (C) Copyright 2004 + * Texas Instruments, + * Richard Woodruff + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _OMAP24XX_SYS_PROTO_H_ +#define _OMAP24XX_SYS_PROTO_H_ + +void prcm_init(void); +void memif_init(void); +void sdrc_init(void); +void do_sdrc_init(u32,u32); +void gpmc_init(void); + +void ether_init(void); +void watchdog_init(void); +void set_muxconf_regs(void); +void peripheral_enable(void); + +u32 get_cpu_type(void); +u32 get_cpu_rev(void); +u32 get_mem_type(void); +u32 get_sysboot_value(void); +u32 get_gpmc0_base(void); +u32 is_gpmc_muxed(void); +u32 get_gpmc0_type(void); +u32 get_gpmc0_width(void); +u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound); +u32 get_board_type(void); +void display_board_info(u32); +void update_mux(u32,u32); +#endif + diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h index 0f38e10d2d..c2b69fb2dd 100644 --- a/include/asm-arm/io.h +++ b/include/asm-arm/io.h @@ -35,10 +35,12 @@ * to the architecture specific code. */ #define __arch_getb(a) (*(volatile unsigned char *)(a)) -#define __arch_getl(a) (*(volatile unsigned int *)(a)) +#define __arch_getw(a) (*(volatile unsigned short *)(a)) +#define __arch_getl(a) (*(volatile unsigned int *)(a)) #define __arch_putb(v,a) (*(volatile unsigned char *)(a) = (v)) -#define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v)) +#define __arch_putw(v,a) (*(volatile unsigned short *)(a) = (v)) +#define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v)) extern void __raw_writesb(unsigned int addr, const void *data, int bytelen); extern void __raw_writesw(unsigned int addr, const void *data, int wordlen); diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h new file mode 100644 index 0000000000..b933c24988 --- /dev/null +++ b/include/configs/omap2420h4.h @@ -0,0 +1,213 @@ +/* + * (C) Copyright 2004 + * Texas Instruments. + * Richard Woodruff + * Kshitij Gupta + * + * Configuration settings for the 242x TI H4 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP2420 1 /* which is in a 2420 */ +#define CONFIG_OMAP2420H4 1 /* and on a H4 board */ +//#define CONFIG_APTIX 1 /* define if on APTIX test chip */ +//#define CONFIG_VIRTIO 1 /* Using Virtio simulator */ + +#define PRCM_CONFIG_II 1 +#define CONFIG_PARTIAL_SRAM 1 + +#include /* get chip and board defs */ + +#ifdef CONFIG_APTIX +#define V_SCLK 1500000 +#else +#define V_SCLK 12000000 +#endif + +/* input clock of PLL */ +/* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */ +#define CONFIG_SYS_CLK_FREQ V_SCLK + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * Size of malloc() pool + */ +#define CFG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + SZ_128K) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +/* + * SMC91c96 Etherent + */ +#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_LAN91C96_BASE (H4_CS1_BASE+0x300) +#define CONFIG_LAN91C96_EXT_PHY + +/* + * NS16550 Configuration + */ +#ifdef CONFIG_APTIX +#define V_NS16550_CLK (6000000) /* 6MHz in current MaxSet */ +#else +#define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */ +#endif + +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE (-4) +#define CFG_NS16550_CLK V_NS16550_CLK /* 3MHz (1.5MHz*2) */ +#define CFG_NS16550_COM1 OMAP2420_UART1 + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL1 1 /* UART1 on H4 */ + + /* + * I2C configuration + */ +#define CONFIG_HARD_I2C +#define CFG_I2C_SPEED 100000 +#define CFG_I2C_SLAVE 1 +#define CONFIG_DRIVER_OMAP24XX_I2C + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C) + +// I'd like to get to these. Snap kernel loads if we make MMC go // + // #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_NAND | CFG_CMD_JFFS2 | CFG_CMD_DHCP | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_I2C) + +#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +#define CONFIG_BOOTDELAY 3 + +#ifdef NFS_BOOT_DEFAULTS +#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd root=/dev/nfs rw nfsroot=128.247.77.158:/home/a0384864/wtbu/rootfs ip=dhcp" +#else +#define CONFIG_BOOTARGS "root=/dev/ram0 rw mem=32M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192" +#endif + +#define CONFIG_NETMASK 255.255.254.0 +#define CONFIG_IPADDR 128.247.77.90 +#define CONFIG_SERVERIP 128.247.77.158 +#define CONFIG_BOOTFILE "uImage" + +/* + * Miscellaneous configurable options + */ +#ifdef CONFIG_APTIX +#define V_PROMPT "OMAP2420 Aptix # " +#else +#define V_PROMPT "OMAP242x H4 # " +#endif + +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT V_PROMPT +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START (OMAP2420_SDRC_CS0) /* memtest works on */ +#define CFG_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M) + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR (OMAP2420_SDRC_CS0) /* default load address */ + +/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by + * 32KHz clk, or from external sig. This rate is divided by a local divisor. + */ +#ifdef CONFIG_APTIX +#define V_PVT 3 +#else +#define V_PVT 7 /* use with 12MHz/128 */ +#endif + +#define CFG_TIMERBASE OMAP2420_GPT2 +#define CFG_PVT V_PVT /* 2^(pvt+1) */ +#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT)) + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE SZ_128K /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ +#define PHYS_SDRAM_1 OMAP2420_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ +#define PHYS_SDRAM_2 OMAP2420_SDRC_CS1 + +#define PHYS_FLASH_1 H4_CS0_BASE /* Flash Bank #1 */ +#define PHYS_FLASH_SIZE_1 SZ_32M +#define PHYS_FLASH_2 (H4_CS0_BASE+SZ_32M) /* same cs, 2 chips in series */ +#define PHYS_FLASH_SIZE_2 SZ_32M +#define CFG_FLASH_BASE PHYS_FLASH_1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT (259) /* max number of sectors on one chip */ + +#define CFG_ENV_ADDR (CFG_FLASH_BASE + SZ_128K) +#define CFG_ENV_IS_IN_FLASH 1 + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (10*75*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (10*75*CFG_HZ) /* Timeout for Flash Write */ + +#endif /* __CONFIG_H */ diff --git a/include/ns16550.h b/include/ns16550.h index 5890246a87..e17a11edca 100644 --- a/include/ns16550.h +++ b/include/ns16550.h @@ -72,7 +72,7 @@ struct NS16550 { int pad7:24; unsigned char scr; /* 7 */ int pad8:24; -#if defined(CONFIG_OMAP1510) || defined(CONFIG_OMAP1610) +#if defined(CONFIG_OMAP) unsigned char mdr1; /* mode select reset TL16C750*/ #endif #ifdef CONFIG_OMAP1510 diff --git a/lib_arm/cache.c b/lib_arm/cache.c index 4f3cbc2292..61ee9d3b13 100644 --- a/lib_arm/cache.c +++ b/lib_arm/cache.c @@ -23,7 +23,14 @@ /* for now: just dummy functions to satisfy the linker */ +#include + void flush_cache (unsigned long dummy1, unsigned long dummy2) { +#ifdef CONFIG_OMAP2420 + void arm1136_cache_flush(void); + + arm1136_cache_flush(); +#endif return; } -- 2.39.5