From 8eeb80e222d5be01a788dc351c77fd689513a6a0 Mon Sep 17 00:00:00 2001 From: richardbarry Date: Sun, 23 Jun 2013 20:38:17 +0000 Subject: [PATCH] Remove old trace recorder source from LPC18xx project. git-svn-id: https://svn.code.sf.net/p/freertos/code/trunk@1943 1d2547de-c912-0410-9cb9-b8ca96c0e9e2 --- .../Readme Config.txt | 22 - .../Configuration - template/trcConfig.h | 465 ------ .../Configuration - template/trcPort.h | 490 ------ .../TraceRecorderSrc/Include/trcBase.h | 524 ------ .../TraceRecorderSrc/Include/trcHooks.h | 308 ---- .../TraceRecorderSrc/Include/trcKernel.h | 274 ---- .../TraceRecorderSrc/Include/trcPort.h | 492 ------ .../TraceRecorderSrc/Include/trcTypes.h | 81 - .../TraceRecorderSrc/Include/trcUser.h | 444 ----- .../debugger trace upload.txt | 126 -- .../ThirdParty/TraceRecorderSrc/readme.txt | 53 - .../ThirdParty/TraceRecorderSrc/trcBase.c | 992 ------------ .../ThirdParty/TraceRecorderSrc/trcKernel.c | 491 ------ .../ThirdParty/TraceRecorderSrc/trcPort.c | 208 --- .../ThirdParty/TraceRecorderSrc/trcUser.c | 1421 ----------------- 15 files changed, 6391 deletions(-) delete mode 100644 FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Configuration - template/Readme Config.txt delete mode 100644 FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Configuration - template/trcConfig.h delete mode 100644 FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Configuration - template/trcPort.h delete mode 100644 FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Include/trcBase.h delete mode 100644 FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Include/trcHooks.h delete mode 100644 FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Include/trcKernel.h delete mode 100644 FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Include/trcPort.h delete mode 100644 FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Include/trcTypes.h delete mode 100644 FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Include/trcUser.h delete mode 100644 FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/debugger trace upload.txt delete mode 100644 FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/readme.txt delete mode 100644 FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/trcBase.c delete mode 100644 FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/trcKernel.c delete mode 100644 FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/trcPort.c delete mode 100644 FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/trcUser.c diff --git a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Configuration - template/Readme Config.txt b/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Configuration - template/Readme Config.txt deleted file mode 100644 index 8883a59aa..000000000 --- a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Configuration - template/Readme Config.txt +++ /dev/null @@ -1,22 +0,0 @@ -FreeRTOS+Trace v2.3.0 ---------------------- - -This directory contains the recorder files that the typical FreeRTOS+Trace user needs to be aware of. - -- trcPort.h - contains the hardware ports and the setting of what port to use. -- trcConfig.h - contains the recorder configuration. - -The files in this directory are however not referenced by any of the demo projects. -Copies of these files are instead found in each Demo project directory. - -These copies are included here to make the TraceRecorderSrc directory complete. - -If you use this template, you will need to update the following macro definitions in trcPort.h: -- SELECTED_PORT -- IRQ_PRIORITY_ORDER -- vTraceConsoleMessage (optional, if console prints are desired) - -Always remember to check the settings used in trcConfig.h. - -Percepio AB -www.percepio.com diff --git a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Configuration - template/trcConfig.h b/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Configuration - template/trcConfig.h deleted file mode 100644 index 1ffa3efec..000000000 --- a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Configuration - template/trcConfig.h +++ /dev/null @@ -1,465 +0,0 @@ -/******************************************************************************* - * FreeRTOS+Trace v2.3.0 Recorder Library - * Percepio AB, www.percepio.com - * - * trcConfig.h - * - * Configuration parameters for the trace recorder library. Before using the - * trace recorder library, please check that the default settings are - * appropriate for your system, and if necessary adjust these. Most likely, you - * will need to adjust the NTask, NISR, NQueue, NMutex and NSemaphore values to - * reflect the number of such objects in your system. These may be - * overapproximated, although larger values values implies more RAM usage. - * - * Terms of Use - * This software is copyright Percepio AB. The recorder library is free for - * use together with Percepio products. You may distribute the recorder library - * in its original form, including modifications in trcPort.c and trcPort.h - * given that these modification are clearly marked as your own modifications - * and documented in the initial comment section of these source files. - * This software is the intellectual property of Percepio AB and may not be - * sold or in other ways commercially redistributed without explicit written - * permission by Percepio AB. - * - * Disclaimer - * The trace tool and recorder library is being delivered to you AS IS and - * Percepio AB makes no warranty as to its use or performance. Percepio AB does - * not and cannot warrant the performance or results you may obtain by using the - * software or documentation. Percepio AB make no warranties, express or - * implied, as to noninfringement of third party rights, merchantability, or - * fitness for any particular purpose. In no event will Percepio AB, its - * technology partners, or distributors be liable to you for any consequential, - * incidental or special damages, including any lost profits or lost savings, - * even if a representative of Percepio AB has been advised of the possibility - * of such damages, or for any claim by any third party. Some jurisdictions do - * not allow the exclusion or limitation of incidental, consequential or special - * damages, or the exclusion of implied warranties or limitations on how long an - * implied warranty may last, so the above limitations may not apply to you. - * - * FreeRTOS+Trace is available as Free Edition and in two premium editions. - * You may use the premium features during 30 days for evaluation. - * Download FreeRTOS+Trace at http://www.percepio.com/products/downloads/ - * - * Copyright Percepio AB, 2012. - * www.percepio.com - ******************************************************************************/ - -#ifndef TRCCONFIG_H -#define TRCCONFIG_H - -/******************************************************************************* - * CONFIGURATION RELATED TO CAPACITY AND ALLOCATION - ******************************************************************************/ - -/******************************************************************************* - * EVENT_BUFFER_SIZE - * - * Macro which should be defined as an integer value. - * - * This defines the capacity of the event buffer, i.e., the number of records - * it may store. Each registered event typically use one record (4 byte), but - * vTracePrintF may use multiple records depending on the number of data args. - ******************************************************************************/ - -#define EVENT_BUFFER_SIZE 1000 /* Adjust wrt. to available RAM */ - - -/******************************************************************************* - * USE_LINKER_PRAGMA - * - * Macro which should be defined as an integer value, default is 0. - * - * If this is 1, the header file "recorderdata_linker_pragma.h" is included just - * before the declaration of RecorderData (in trcBase.c), i.e., the trace data - * structure. This allows the user to specify a pragma with linker options. - * - * Example (for IAR Embedded Workbench and NXP LPC17xx): - * #pragma location="AHB_RAM_MEMORY" - * - * This example instructs the IAR linker to place RecorderData in another RAM - * bank, the AHB RAM. This can also be used for other compilers with a similar - * pragmas for linker options. - * - * Note that this only applies if using static allocation, see below. - ******************************************************************************/ - -#define USE_LINKER_PRAGMA 0 - - -/******************************************************************************* - * SYMBOL_TABLE_SIZE - * - * Macro which should be defined as an integer value. - * - * This defines the capacity of the symbol table, in bytes. This symbol table - * stores User Events labels and names of deleted tasks, queues, or other kernel - * objects. Note that the names of active objects not stored here but in the - * Object Table. Thus, if you don't use User Events or delete any kernel - * objects you set this to zero (0) to minimize RAM usage. - ******************************************************************************/ -#define SYMBOL_TABLE_SIZE 1000 - -/******************************************************************************* - * NTask, NISR, NQueue, NSemaphore, NMutex - * - * A group of Macros which should be defined as an integer value of zero (0) - * or larger. - * - * This defines the capacity of the Object Property Table - the maximum number - * of objects active at any given point within each object class. - * - * NOTE: In case objects are deleted and created during runtime, this setting - * does not limit the total amount of objects, only the number of concurrently - * active objects. - * - * Using too small values will give an error message through the vTraceError - * routine, which makes the error message appear when opening the trace data - * in FreeRTOS+Trace. If you are using the recorder status monitor task, - * any error messages are displayed in console prints, assuming that the - * print macro has been defined properly (vConsolePrintMessage). - * - * It can be wise to start with very large values for these constants, - * unless you are very confident on these numbers. Then do a recording and - * check the actual usage in FreeRTOS+Trace. This is shown by selecting - * View -> Trace Details -> Resource Usage -> Object Table - * - * NOTE 2: Remember to account for all tasks created by FreeRTOS, such as the - * IDLE task, the FreeRTOS timer task, and any tasks created by other 3rd party - * software components, such as communication stacks. The recorder also has an - * optional monitor task to account for, if this is used. - * Moreover, one task slot is used to indicate "(startup)", i.e., a fictive - * task that represent the time before the FreeRTOS scheduler starts. - * NTask should thus be at least 2-3 slots larger than your application task count. - * - * NOTE 3: The FreeRTOS timer task creates a Queue, that should be accounted - * for in NQueue. - ******************************************************************************/ -#define NTask 15 -#define NISR 4 -#define NQueue 3 -#define NSemaphore 4 -#define NMutex 2 - -/* Maximum object name length for each class (includes zero termination) */ -#define NameLenTask configMAX_TASK_NAME_LEN -#define NameLenISR 10 -#define NameLenQueue 15 -#define NameLenSemaphore 15 -#define NameLenMutex 15 - -/****************************************************************************** - * TRACE_DESCRIPTION - * - * Macro which should be defined as a string. - * - * This string is stored in the trace and displayed in FreeRTOS+Trace. Can be - * used to store, e.g., system version or build date. This is also used to store - * internal error messages from the recorder, which if occurs overwrites the - * value defined here. This may be maximum 256 chars. - *****************************************************************************/ -#define TRACE_DESCRIPTION "FreeRTOS+Trace Demo" - -/****************************************************************************** - * TRACE_DESCRIPTION_MAX_LENGTH - * - * The maximum length (including zero termination) for the TRACE_DESCRIPTION - * string. Since this string also is used for internal error messages from the - * recorder do not make it too short, as this may truncate the error messages. - * Default is 80. - * Maximum allowed length is 256 - the trace will fail to load if longer. - *****************************************************************************/ -#define TRACE_DESCRIPTION_MAX_LENGTH 80 - - -/****************************************************************************** - * TRACE_DATA_ALLOCATION - * - * This defines how to allocate the recorder data structure, i.e., using a - * static declaration or using a dynamic allocation in runtime (malloc). - * - * Should be one of these two options: - * - TRACE_DATA_ALLOCATION_STATIC (default) - * - TRACE_DATA_ALLOCATION_DYNAMIC - * - * Using static allocation has the benefits of compile-time errors if the buffer - * is too large (too large constants in trcConfig.h) and no need to call the - * initialization routine (xTraceInitTraceData). - * - * Using dynamic allocation may give more flexibility in some cases. - *****************************************************************************/ - -#define TRACE_DATA_ALLOCATION TRACE_DATA_ALLOCATION_STATIC - - -/****************************************************************************** - * CONFIGURATION REGARDING WHAT CODE/FEATURES TO INCLUDE - *****************************************************************************/ - -/****************************************************************************** - * INCLUDE_FLOAT_SUPPORT - * - * Macro which should be defined as either zero (0) or one (1). - * Default is 1. - * - * If this is zero (0), all references to floating point values are removed, - * in case floating point values are not supported by the platform used. - * Floating point values are only used in vTracePrintF and its subroutines, to - * store float (%f) or double (%lf) argments. - * - * Note: vTracePrintF can still be used with integer and string arguments in - * either case. - *****************************************************************************/ -#define INCLUDE_FLOAT_SUPPORT 1 - -/****************************************************************************** - * INCLUDE_USER_EVENTS - * - * Macro which should be defined as either zero (0) or one (1). - * Default is 1. - * - * If this is zero (0) the code for creating User Events is excluded to - * reduce code size. User Events are application-generated events, like - * "printf" but for the trace log instead of console output. User Events are - * much faster than a printf and can therefore be used in timing critical code. - * See vTraceUserEvent() and vTracePrintF() in trcUser.h - * - * Note that FreeRTOS+Trace Standard Edition or Professional Edition is required - * for User Events, they are not displayed in FreeRTOS+Trace Free Edition. - *****************************************************************************/ -#define INCLUDE_USER_EVENTS 1 - -/***************************************************************************** - * INCLUDE_READY_EVENTS - * - * Macro which should be defined as either zero (0) or one (1). - * Default is 1. - * - * If this is zero (0), the code for recording Ready events is - * excluded. Note, this will make it impossible to calculate the correct - * response times. - *****************************************************************************/ -#define INCLUDE_READY_EVENTS 1 - -/***************************************************************************** - * INCLUDE_ISR_TRACING - * - * Macro which should be defined as either zero (0) or one (1). - * Default is 1. - * - * If this is zero (0), the code for recording Interrupt Service Routines is - * excluded to reduce code size. Note, recording ISRs require that you insert - * calls to vTraceStoreISRBegin and vTraceStoreISREnd in your interrupt handlers. - * There is no automatic recording of ISRs like for task scheduling, since - * FreeRTOS does not have a central interrupt dispatcher. - *****************************************************************************/ -#define INCLUDE_ISR_TRACING 1 - -/****************************************************************************** - * INCLUDE_OBJECT_DELETE - * - * Macro which should be defined as either zero (0) or one (1). - * Default is 1. - * - * This must be enabled (1) if tasks, queues or other - * traced kernel objects are deleted at runtime, e.g., using vTaskDelete or - * vQueueDelete. If no deletes are made, this can be set to 0 in order to - * exclude the delete-handling code. - *****************************************************************************/ -#define INCLUDE_OBJECT_DELETE 1 - -/****************************************************************************** - * CONFIGURATION RELATED TO BEHAVIOR - *****************************************************************************/ - -/****************************************************************************** - * RECORDER_STORE_MODE - * - * Macro which should be defined as one of: - * - STORE_MODE_RING_BUFFER - * - STORE_MODE_STOP_WHEN_FULL - * Default is STORE_MODE_RING_BUFFER. - * - * With RECORDER_STORE_MODE set to STORE_MODE_RING_BUFFER, the events are stored - * in a ring buffer, i.e., where the oldest events are overwritten when the - * buffer becomes full. This allows you to get the last events leading up to an - * interesting state, e.g., an error, without having a large trace buffer for - * string the whole run since startup. In this mode, the recorder can run - * "forever" as the buffer never gets full, i.e., in the sense that it always - * has room for more events. - * - * To fetch the trace in mode STORE_MODE_RING_BUFFER, you need to first halt the - * system using your debugger and then do a RAM dump, or to explicitly stop the - * recorder using vTraceStop() and then store/upload the trace data using a - * FreeRTOS task that you need to provide yourself. The trace data is found in - * the struct RecorderData, initialized in trcBase.c. - * - * Note that, if you upload the trace using a RAM dump, i.e., when the system is - * halted on a breakpoint or by a debugger command, there is no need to stop the - * recorder first. - * - * When RECORDER_STORE_MODE is STORE_MODE_STOP_WHEN_FULL, the recording is - * stopped when the buffer becomes full. When the recorder stops itself this way - * vTracePortEnd() is called which allows for custom actions, such as triggering - * a task that stores the trace buffer, i.e., in case taking a RAM dump - * using an on-chip debugger is not possible. In the Windows port, vTracePortEnd - * saves the trace to file directly, but this is not recommended in a real-time - * system since the scheduler is blocked during the processing of vTracePortEnd. - *****************************************************************************/ -#ifndef WIN32 -#define RECORDER_STORE_MODE STORE_MODE_RING_BUFFER -#else -/* Default in the Win32 demo */ -#define RECORDER_STORE_MODE STORE_MODE_STOP_WHEN_FULL -#endif - -/****************************************************************************** - * STOP_AFTER_N_EVENTS - * - * Macro which should be defined as an integer value, or not defined. - * Default is -1 - * - * STOP_AFTER_N_EVENTS is intended for tests of the ring buffer mode (when - * RECORDER_STORE_MODE is STORE_MODE_RING_BUFFER). It stops the recording when - * the specified number of events has been observed. This value can be larger - * than the buffer size, to allow for test of the "wrapping around" that occurs - * in ring buffer mode . A negative value (or no definition of this macro) - * disables this feature. - *****************************************************************************/ -#define STOP_AFTER_N_EVENTS -1 - -/****************************************************************************** - * USE_IMPLICIT_IFE_RULES - * - * Macro which should be defined as either zero (0) or one (1). - * Default is 1. - * - * ### Instance Finish Events (IFE) ### - * - * For tasks with "infinite" main loops (non-terminating tasks), the concept - * of a task instance has no clear definition, it is an application-specific - * thing. FreeRTOS+Trace allows you to define Instance Finish Events (IFEs), - * which marks the point in a cyclic task when the "task instance" ends. - * The IFE is a blocking kernel call, typically in the main loop of a task - * which typically reads a message queue, waits for a semaphore or performs - * an explicit delay. - * - * If USE_IMPLICIT_IFE_RULES is one (1), the following FreeRTOS kernel calls - * are considered by default to be IFEs (Implicit IFEs): - * - vTaskDelay - * - vTaskDelayUntil - * - vTaskSuspend - * - xQueueReceive (blocking cases only) - * - xSemaphoreTake (blocking cases only) - * - * However, Implicit IFEs only applies to blocking kernel calls. If an - * xQueueReceive reads a message without blocking, it does not create a new - * instance since no blocking occurred. - * - * Moreover, the actual IFE might sometimes be another blocking call such as - * xQueueSend or xSemaphoreGive. We therefore allow for user-defined - * Explicit IFEs by calling - * - * vTraceTaskInstanceIsFinished() - * - * right before the kernel call considered as IFE. This does not create an - * additional event but instead stores the service code and object handle - * of the IFE call as properties of the task. - * - * If using Explicit IFEs and the task also calls an Implicit IFE like - * vTaskDelay, this may result in additional incorrect task instances. - * This is solved by disabling the Implicit IFEs for the task, by adding - * a call to - * - * vTraceTaskSkipDefaultInstanceFinishedEvents() - * - * in the very beginning of that task. This allows you to combine Explicit IFEs - * for some tasks with Implicit IFEs for the rest of the tasks, if - * USE_IMPLICIT_IFE_RULES is 1. - * - * By setting USE_IMPLICIT_IFE_RULES to zero (0), the implicit IFEs are disabled - * for all tasks. Tasks will then be considered to have a single instance only, - * covering all execution fragments, unless you define an explicit IFE in each - * task by calling vTraceTaskInstanceIsFinished before the blocking call. - *****************************************************************************/ -#define USE_IMPLICIT_IFE_RULES 1 - -/****************************************************************************** - * INCLUDE_SAVE_TO_FILE - * - * Macro which should be defined as either zero (0) or one (1). - * Default is 0. - * - * If enabled (1), the recorder will include code for saving the trace - * to a local file system. - ******************************************************************************/ -#ifdef WIN32 - #define INCLUDE_SAVE_TO_FILE 1 -#else - #define INCLUDE_SAVE_TO_FILE 0 -#endif - -/****************************************************************************** - * TRACE_PROGRESS_MONITOR_TASK_PRIORITY - * - * Macro which sets the priority of the "recorder status monitor" task. - * - * This task, vTraceMonitorTask in trcUser.c, periodically writes - * the recorder status using the vTraceConsoleMessage macro, which is to - * be mapped to your console "printf" routine. The task is named TraceMon but - * is intentionally excluded from the demo trace. - * - * Default is tskIDLE_PRIORITY + 1 - * Note that if your system constantly has a high CPU load from high-priority - * tasks, this might not be get a chance to execute. - * - * See vTraceMonitorTask in trcUser.c - *****************************************************************************/ -#define TRACE_PROGRESS_MONITOR_TASK_PRIORITY (tskIDLE_PRIORITY + 1) - -/****************************************************************************** - * TRACE_PROGRESS_MONITOR_TASK_STACKSIZE - * - * Macro which sets the stack size of the "recorder status monitor" task. - * - * This task, vTraceMonitorTask in trcUser.c, periodically writes - * the recorder status using the vTraceConsoleMessage macro, which is to - * be mapped to your console "printf" routine. The task is intentionally - * excluded from the demo trace. - * - * See vTraceMonitorTask in trcUser.c - *****************************************************************************/ -#define TRACE_PROGRESS_MONITOR_TASK_STACKSIZE 500 - -/****************************************************************************** - * TRACE_PROGRESS_MONITOR_TASK_PERIOD - * - * Macro which sets the period of the "recorder status monitor" task. - * - * This task, vTraceMonitorTask in trcUser.c, periodically writes - * the recorder status using the vTraceConsoleMessage macro, which is to - * be mapped to your console "printf" routine. The task is named TraceMon but - * is intentionally excluded from the demo trace. - * - * Default is 1000 FreeRTOS ticks (typically 1 second). On the Windows port, a - * lower value is suggested since the Windows port runs very slowly, often 20-40 - * times slower than the simulated FreeRTOS time. - * - * See vTraceMonitorTask in trcUser.c - *****************************************************************************/ -#ifdef WIN32 - #define TRACE_PROGRESS_MONITOR_TASK_PERIOD 100 -#else - #define TRACE_PROGRESS_MONITOR_TASK_PERIOD 1000 -#endif - -/****************************************************************************** - * TEAM_LICENSE_CODE - * - * Macro which defines a string - the team license code. - * If no team license is available, this should be an empty string "". - * This should be maximum 32 chars, including zero-termination. - *****************************************************************************/ -#define TEAM_LICENSE_CODE "" - -#endif - diff --git a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Configuration - template/trcPort.h b/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Configuration - template/trcPort.h deleted file mode 100644 index a2d4bf1a4..000000000 --- a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Configuration - template/trcPort.h +++ /dev/null @@ -1,490 +0,0 @@ -/******************************************************************************* - * FreeRTOS+Trace v2.3.0 Recorder Library - * Percepio AB, www.percepio.com - * - * trcPort.h - * - * Contains together with trcPort.c all portability issues of the trace recorder - * library. - * - * Terms of Use - * This software is copyright Percepio AB. The recorder library is free for - * use together with Percepio products. You may distribute the recorder library - * in its original form, including modifications in trcPort.c and trcPort.h - * given that these modification are clearly marked as your own modifications - * and documented in the initial comment section of these source files. - * This software is the intellectual property of Percepio AB and may not be - * sold or in other ways commercially redistributed without explicit written - * permission by Percepio AB. - * - * Disclaimer - * The trace tool and recorder library is being delivered to you AS IS and - * Percepio AB makes no warranty as to its use or performance. Percepio AB does - * not and cannot warrant the performance or results you may obtain by using the - * software or documentation. Percepio AB make no warranties, express or - * implied, as to noninfringement of third party rights, merchantability, or - * fitness for any particular purpose. In no event will Percepio AB, its - * technology partners, or distributors be liable to you for any consequential, - * incidental or special damages, including any lost profits or lost savings, - * even if a representative of Percepio AB has been advised of the possibility - * of such damages, or for any claim by any third party. Some jurisdictions do - * not allow the exclusion or limitation of incidental, consequential or special - * damages, or the exclusion of implied warranties or limitations on how long an - * implied warranty may last, so the above limitations may not apply to you. - * - * FreeRTOS+Trace is available as Free Edition and in two premium editions. - * You may use the premium features during 30 days for evaluation. - * Download FreeRTOS+Trace at http://www.percepio.com/products/downloads/ - * - * Copyright Percepio AB, 2012. - * www.percepio.com - ******************************************************************************/ - -#ifndef TRCPORT_H -#define TRCPORT_H - -/* If FreeRTOS Win32 port */ -#ifdef WIN32 - - #undef _WIN32_WINNT - #define _WIN32_WINNT 0x0600 - - /* Standard includes. */ - #include - #include - #include - -/******************************************************************************* - * The Win32 port by default saves the trace to file and then kills the - * program when the recorder is stopped, to facilitate quick, simple tests - * of the recorder. - ******************************************************************************/ - #define WIN32_PORT_SAVE_WHEN_STOPPED 1 - #define WIN32_PORT_EXIT_WHEN_STOPPED 1 - -#endif - -#define DIRECTION_INCREMENTING 1 -#define DIRECTION_DECREMENTING 2 - -/****************************************************************************** - * Supported ports - * - * PORT_HWIndependent - * A hardware independent fallback option for event timestamping. Provides low - * resolution timestamps based on the OS tick. - * This may be used on the Win32 port, but may also be used on embedded hardware - * platforms. Note that this gives suboptimal display in FreeRTOS+Trace. All - * time durations will be truncated to the OS tick frequency, typically 1 KHz. - * This means that a task or ISR that executes in less than 1 ms get an exection - * time of zero. They are however still visible in FreeRTOS+Trace. - * - * PORT_Win32 - * "Accurate" timestamping based on the Windows permance counter. Note that - * this gives the host machine time, not the simulated FreeRTOS time (tick - * count). The timing of the Win32 FreeRTOS build is not real-time, since it - * depends on the scheduling and tick rate of Windows, which is very slow. - * - * Officially supported hardware timer ports: - * - PORT_Atmel_AT91SAM7 - * - PORT_Atmel_UC3A0 - * - PORT_ARM_CortexM - * - PORT_Renesas_RX600 - * - PORT_Microchip_dsPIC_AND_PIC24 - * - * We also provide several "unofficial" hardware-specific ports. There have - * been developed by external contributors, and have not yet been verified - * by Percepio AB. Let us know if you have problems getting these to work. - * - * Unoffical hardware specific ports provided are: - * - PORT_TEXAS_INSTRUMENTS_TMS570 - * - PORT_TEXAS_INSTRUMENTS_MSP430 - * - PORT_MICROCHIP_PIC32 - * - PORT_XILINX_PPC405 - * - PORT_XILINX_PPC440 - * - PORT_XILINX_MICROBLAZE - * - PORT_NXP_LPC210X - * - *****************************************************************************/ - -#define PORT_NOT_SET -1 - -/*** Officially supported hardware timer ports *******************************/ -#define PORT_HWIndependent 0 -#define PORT_Win32 1 -#define PORT_Atmel_AT91SAM7 2 -#define PORT_Atmel_UC3A0 3 -#define PORT_ARM_CortexM 4 -#define PORT_Renesas_RX600 5 -#define PORT_Microchip_dsPIC_AND_PIC24 6 - -/*** Unofficial ports, provided by external developers, not yet verified *****/ -#define PORT_TEXAS_INSTRUMENTS_TMS570 7 -#define PORT_TEXAS_INSTRUMENTS_MSP430 8 -#define PORT_MICROCHIP_PIC32 9 -#define PORT_XILINX_PPC405 10 -#define PORT_XILINX_PPC440 11 -#define PORT_XILINX_MICROBLAZE 12 -#define PORT_NXP_LPC210X 13 - -/*** Select your port here! **************************************************/ -#define SELECTED_PORT PORT_NOT_SET -/*****************************************************************************/ - -#if (SELECTED_PORT == PORT_NOT_SET) -#error "You need to define SELECTED_PORT here!" -#endif - -/******************************************************************************* - * IRQ_PRIORITY_ORDER - * - * Macro which should be defined as an integer of 0 or 1. - * - * This should be 0 if lower irq priority values implies higher priority - * levels, such as on ARM Cortex M. If the opposite scheme is used, i.e., - * if higher irq priority values means higher priority, this should be 1. - * - * This setting is not critical. It is used only to sort and colorize the - * interrupts in priority order, in case you record interrupts using - * the vTraceStoreISRBegin and vTraceStoreISREnd routines. - * - * We provide this setting for some hardware architectures below: - * - ARM Cortex M: 0 (lower irq priority values are more significant) - * - Atmel AT91SAM7x: 1 (higher irq priority values are more significant) - * - Atmel AVR32: 1 (higher irq priority values are more significant) - * - Renesas RX600: 1 (higher irq priority values are more significant) - * - Microchip PIC24: 0 (lower irq priority values are more significant) - * - Microchip dsPIC: 0 (lower irq priority values are more significant) - * - TI TMS570: 0 (lower irq priority values are more significant) - * - Freescale HCS08: 0 (lower irq priority values are more significant) - * - Freescale HCS12: 0 (lower irq priority values are more significant) - * - PowerPC 405: 0 (lower irq priority values are more significant) - * - PowerPC 440: 0 (lower irq priority values are more significant) - * - Freescale ColdFire: 1 (higher irq priority values are more significant) - * - NXP LPC210x: 0 (lower irq priority values are more significant) - * - MicroBlaze: 0 (lower irq priority values are more significant) - * - * If your chip is not on the above list, and you perhaps know this detail by - * heart, please inform us by e-mail to support@percepio.com. - * - ****************************************************************************** - * - * HWTC Macros - * - * These four HWTC macros provides a hardware isolation layer representing a - * generic hardware timer/counter used for driving the operating system tick, - * such as the SysTick feature of ARM Cortex M3/M4, or the PIT of the Atmel - * AT91SAM7X. - * - * HWTC_COUNT: The current value of the counter. This is expected to be reset - * a each tick interrupt. Thus, when the tick handler starts, the counter has - * already wrapped. - * - * HWTC_COUNT_DIRECTION: Should be one of: - * - DIRECTION_INCREMENTING - for hardware timer/counters of incrementing type - * such as the PIT on Atmel AT91SAM7X. - * When the counter value reach HWTC_PERIOD, it is reset to zero and the - * interrupt is signaled. - * - DIRECTION_DECREMENTING - for hardware timer/counters of decrementing type - * such as the SysTick on ARM Cortex M3/M4 chips. - * When the counter value reach 0, it is reset to HWTC_PERIOD and the - * interrupt is signaled. - * - * HWTC_PERIOD: The number of increments or decrements of HWTC_COUNT between - * two tick interrupts. This should preferably be mapped to the reload - * register of the hardware timer, to make it more portable between chips in the - * same family. The macro should in most cases be (reload register + 1). - * - * HWTC_DIVISOR: If the timer frequency is very high, like on the Cortex M chips - * (where the SysTick runs at the core clock frequency), the "differential - * timestamping" used in the recorder will more frequently insert extra XTS - * events to store the timestamps, which increases the event buffer usage. - * In such cases, to reduce the number of XTS events and thereby get longer - * traces, you use HWTC_DIVISOR to scale down the timestamps and frequency. - * Assuming a OS tick rate of 1 KHz, it is suggested to keep the effective timer - * frequency below 65 MHz to avoid an excessive amount of XTS events. Thus, a - * Cortex M chip running at 72 MHZ should use a HWTC_DIVISOR of 2, while a - * faster chip require a higher HWTC_DIVISOR value. - * - * The HWTC macros and uiTracePortGetTimeStamp is the main porting issue - * or the trace recorder library. Typically you should not need to change - * the code of uiTracePortGetTimeStamp if using the HWTC macros. - * - * FREE LICENSE OFFER FROM PERCEPIO - * - * For silicon companies and non-corporate FreeRTOS users (researchers, students, - * hobbyists or early-phase startups) we have the following offer: - * Provide a hardware port for our FreeRTOS recorder and get a FREE single-user - * license for FreeRTOS+Trace Professional Edition. Read more about this offer - * at www.percepio.com or contact us directly at support@percepio.com. - * - ******************************************************************************/ - -#if (SELECTED_PORT == PORT_Win32) - - #define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING - #define HWTC_COUNT (ulGetRunTimeCounterValue()) - #define HWTC_PERIOD 0 - #define HWTC_DIVISOR 1 - - #define IRQ_PRIORITY_ORDER 1 // Please update according to your hardware... - -#elif (SELECTED_PORT == PORT_HWIndependent) - - #define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING - #define HWTC_COUNT 0 - #define HWTC_PERIOD 1 - #define HWTC_DIVISOR 1 - - #define IRQ_PRIORITY_ORDER 1 // Please update according to your hardware... - -#elif (SELECTED_PORT == PORT_Atmel_AT91SAM7) - - /* HWTC_PERIOD is hardcoded for AT91SAM7X256-EK Board (48 MHz) - A more generic solution is to get the period from pxPIT->PITC_PIMR */ - - #define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING - #define HWTC_COUNT (AT91C_BASE_PITC->PITC_PIIR & 0xFFFFF) - #define HWTC_PERIOD 2995 - #define HWTC_DIVISOR 1 - - #define IRQ_PRIORITY_ORDER 1 // higher irq priority values are more significant - -#elif (SELECTED_PORT == PORT_Atmel_UC3A0) - - /* For Atmel AVR32 (AT32UC3A) */ - - #define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING - #define HWTC_COUNT sysreg_read(AVR32_COUNT) - #define HWTC_PERIOD ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ) - #define HWTC_DIVISOR 1 - - #define IRQ_PRIORITY_ORDER 1 // higher irq priority values are more significant - -#elif (SELECTED_PORT == PORT_ARM_CortexM) - - /* For all chips using ARM Cortex M cores */ - - #define HWTC_COUNT_DIRECTION DIRECTION_DECREMENTING - #define HWTC_COUNT (*((uint32_t*)0xE000E018)) - #define HWTC_PERIOD ((*(uint32_t*)0xE000E014) + 1) - #define HWTC_DIVISOR 2 - - #define IRQ_PRIORITY_ORDER 0 // lower irq priority values are more significant - -#elif (SELECTED_PORT == PORT_Renesas_RX600) - - #include "iodefine.h" - - #define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING - #define HWTC_COUNT (CMT0.CMCNT) - #define HWTC_PERIOD ((((configPERIPHERAL_CLOCK_HZ/configTICK_RATE_HZ)-1)/8)) - #define HWTC_DIVISOR 1 - - #define IRQ_PRIORITY_ORDER 1 // higher irq priority values are more significant - -#elif (SELECTED_PORT == PORT_MICROCHIP_dsPIC_AND_PIC24) - - /* For Microchip PIC24 and dsPIC (16 bit) */ - - /* Note: The trace library was originally designed for 32-bit MCUs, and is slower - than intended on 16-bit MCUs. Storing an event on a PIC24 takes about 70 µs. - In comparison, 32-bit MCUs are often 10-20 times faster. If recording overhead - becomes a problem on PIC24, use the filters to exclude less interresting tasks - or system calls. */ - - #define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING - #define HWTC_COUNT (TMR1) - #define HWTC_PERIOD (PR1+1) - #define HWTC_DIVISOR 1 - - #define IRQ_PRIORITY_ORDER 0 // lower irq priority values are more significant - -#elif (SELECTED_PORT == PORT_NXP_LPC210X) - /* UNOFFICIAL PORT - NOT YET VERIFIED BY PERCEPIO */ - - /* Tested with LPC2106, but should work with most LPC21XX chips. - Assumption: prescaler is 1:1 (this setting is hardcoded in - FreeRTOS port for LPC21XX) */ - - #define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING - #define HWTC_COUNT *((uint32_t *)0xE0004008 ) - #define HWTC_PERIOD ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ) - #define HWTC_DIVISOR 1 - - #define IRQ_PRIORITY_ORDER 0 // lower irq priority values are more significant - -#elif (SELECTED_PORT == PORT_TEXAS_INSTRUMENTS_TMS570) - /* UNOFFICIAL PORT - NOT YET VERIFIED BY PERCEPIO */ - - #define RTIFRC0 *((uint32_t *)0xFFFFFC10) - #define RTICOMP0 *((uint32_t *)0xFFFFFC50) - #define RTIUDCP0 *((uint32_t *)0xFFFFFC54) - #define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING - #define HWTC_COUNT (RTIFRC0 - (RTICOMP0 - RTIUDCP0)) - #define HWTC_PERIOD (RTIUDCP0) - #define HWTC_DIVISOR 1 - - #define IRQ_PRIORITY_ORDER 0 // lower irq priority values are more significant - -#elif (SELECTED_PORT == PORT_TEXAS_INSTRUMENTS_MSP430) - /* UNOFFICIAL PORT - NOT YET VERIFIED BY PERCEPIO */ - - #define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING - #define HWTC_COUNT (TA0R) - #define HWTC_PERIOD configCPU_CLOCKS_PER_TICK - #define HWTC_DIVISOR 1 - - #define IRQ_PRIORITY_ORDER 1 // higher irq priority values are more significant - -#elif (SELECTED_PORT == PORT_MICROCHIP_PIC32) - /* UNOFFICIAL PORT - NOT YET VERIFIED BY PERCEPIO */ - - #define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING - #define HWTC_COUNT (ReadTimer1()) /* Should be available in BSP */ - #define HWTC_PERIOD (ReadPeriod1()+1) /* Should be available in BSP */ - #define HWTC_DIVISOR 1 - - #define IRQ_PRIORITY_ORDER 0 // lower irq priority values are more significant - -#elif (SELECTED_PORT == PORT_XILINX_PPC405) - /* UNOFFICIAL PORT - NOT YET VERIFIED BY PERCEPIO */ - - #define HWTC_COUNT_DIRECTION DIRECTION_DECREMENTING - #define HWTC_COUNT mfspr( 0x3db) - #define HWTC_PERIOD ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ) - #define HWTC_DIVISOR 1 - - #define IRQ_PRIORITY_ORDER 0 // lower irq priority values are more significant - -#elif (SELECTED_PORT == PORT_XILINX_PPC440) - /* UNOFFICIAL PORT - NOT YET VERIFIED BY PERCEPIO */ - - /* This should work with most PowerPC chips */ - - #define HWTC_COUNT_DIRECTION DIRECTION_DECREMENTING - #define HWTC_COUNT mfspr( 0x016 ) - #define HWTC_PERIOD ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ) - #define HWTC_DIVISOR 1 - - #define IRQ_PRIORITY_ORDER 0 // lower irq priority values are more significant - -#elif (SELECTED_PORT == PORT_XILINX_MICROBLAZE) - /* UNOFFICIAL PORT - NOT YET VERIFIED BY PERCEPIO */ - - /* This should work with most Microblaze configurations - * This port is based on the official FreeRTOS Microlaze port and example application. - * It uses the AXI Timer 0 - the tick interrupt source. - * If an AXI Timer 0 peripheral is available on your hardware platform, no modifications are required. - */ - #include "xtmrctr_l.h" - - #define HWTC_COUNT_DIRECTION DIRECTION_DECREMENTING - #define HWTC_COUNT XTmrCtr_GetTimerCounterReg( XPAR_TMRCTR_0_BASEADDR, 0 ) - #define HWTC_PERIOD ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ) - #define HWTC_DIVISOR 16 - - #define IRQ_PRIORITY_ORDER 0 // lower irq priority values are more significant - -#elif (SELECTED_PORT != PORT_NOT_SET) - - #error "SELECTED_PORT had unsupported value!" - #define SELECTED_PORT PORT_NOT_SET - -#endif - -#if (SELECTED_PORT != PORT_NOT_SET) - - #ifndef HWTC_COUNT_DIRECTION - #error "HWTC_COUNT_DIRECTION is not set!" - #endif - - #ifndef HWTC_COUNT - #error "HWTC_COUNT is not set!" - #endif - - #ifndef HWTC_PERIOD - #error "HWTC_PERIOD is not set!" - #endif - - #ifndef HWTC_DIVISOR - #error "HWTC_DIVISOR is not set!" - #endif - - #ifndef IRQ_PRIORITY_ORDER - #error "IRQ_PRIORITY_ORDER is not set!" - #elif (IRQ_PRIORITY_ORDER != 0) && (IRQ_PRIORITY_ORDER != 1) - #error "IRQ_PRIORITY_ORDER has bad value!" - #endif - - #if (HWTC_DIVISOR < 1) - #error "HWTC_DIVISOR must be a non-zero positive value!" - #endif - -#endif -/******************************************************************************* - * vTraceConsoleMessage - * - * A wrapper for your system-specific console "printf" console output function. - * This needs to be correctly defined to see status reports from the trace - * status monitor task (this is defined in trcUser.c). - ******************************************************************************/ -#if (SELECTED_PORT == PORT_Atmel_AT91SAM7) -/* Port specific includes */ -#include "console.h" -#endif - -#define vTraceConsoleMessage(x) - -/******************************************************************************* - * uiTracePortGetTimeStamp - * - * Returns the current time based on the HWTC macros which provide a hardware - * isolation layer towards the hardware timer/counter. - * - * The HWTC macros and uiTracePortGetTimeStamp is the main porting issue - * or the trace recorder library. Typically you should not need to change - * the code of uiTracePortGetTimeStamp if using the HWTC macros. - * - * OFFER FROM PERCEPIO: - * For silicon companies and non-corporate FreeRTOS users (researchers, - * students, hobbyists or early-phase startups) we have an attractive offer: - * Provide a hardware timer port and get a FREE single-user licence for - * FreeRTOS+Trace Professional Edition. Read more about this offer at - * www.percepio.com or contact us directly at support@percepio.com. - ******************************************************************************/ -void uiTracePortGetTimeStamp(uint32_t *puiTimestamp); - -/******************************************************************************* - * vTracePortEnd - * - * This function is called when the recorder is stopped due to full buffer. - * Mainly intended to show a message in the console. - * This is used by the Win32 port to store the trace to a file. The file path is - * set using vTracePortSetFileName. - ******************************************************************************/ -void vTracePortEnd(void); - -#if (INCLUDE_SAVE_TO_FILE == 1) - -/******************************************************************************* - * vTracePortSetOutFile - * - * Sets the filename/path used in vTracePortSave. - * This is set in a separate function, since the Win32 port calls vTracePortSave - * in vTracePortEnd if WIN32_PORT_SAVE_WHEN_STOPPED is set. - ******************************************************************************/ -void vTracePortSetOutFile(char* path); - -/****************************************************************************** - * vTracePortSave - * - * Saves the trace to a file on a target-side file system. The path is set in a - * separate function, vTracePortSetOutFile, since the Win32 port may call - * vTracePortSave in vTracePortEnd, if using WIN32_PORT_SAVE_WHEN_STOPPED. - ******************************************************************************/ -void vTracePortSave(void); - -#endif - -#endif diff --git a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Include/trcBase.h b/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Include/trcBase.h deleted file mode 100644 index 4ffd55c6a..000000000 --- a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Include/trcBase.h +++ /dev/null @@ -1,524 +0,0 @@ -/******************************************************************************* - * FreeRTOS+Trace v2.3.0 Recorder Library - * Percepio AB, www.percepio.com - * - * trcBase.h - * - * Core functionallity of the FreeRTOS+Trace recorder library. - * - * Terms of Use - * This software is copyright Percepio AB. The recorder library is free for - * use together with Percepio products. You may distribute the recorder library - * in its original form, including modifications in trcPort.c and trcPort.h - * given that these modification are clearly marked as your own modifications - * and documented in the initial comment section of these source files. - * This software is the intellectual property of Percepio AB and may not be - * sold or in other ways commercially redistributed without explicit written - * permission by Percepio AB. - * - * Disclaimer - * The trace tool and recorder library is being delivered to you AS IS and - * Percepio AB makes no warranty as to its use or performance. Percepio AB does - * not and cannot warrant the performance or results you may obtain by using the - * software or documentation. Percepio AB make no warranties, express or - * implied, as to noninfringement of third party rights, merchantability, or - * fitness for any particular purpose. In no event will Percepio AB, its - * technology partners, or distributors be liable to you for any consequential, - * incidental or special damages, including any lost profits or lost savings, - * even if a representative of Percepio AB has been advised of the possibility - * of such damages, or for any claim by any third party. Some jurisdictions do - * not allow the exclusion or limitation of incidental, consequential or special - * damages, or the exclusion of implied warranties or limitations on how long an - * implied warranty may last, so the above limitations may not apply to you. - * - * FreeRTOS+Trace is available as Free Edition and in two premium editions. - * You may use the premium features during 30 days for evaluation. - * Download FreeRTOS+Trace at http://www.percepio.com/products/downloads/ - * - * Copyright Percepio AB, 2012. - * www.percepio.com - ******************************************************************************/ - -#ifndef TRCBASE_H -#define TRCBASE_H - -#include -#include - -#include "FreeRTOS.h" -#include "trcConfig.h" -#include "trcTypes.h" -#include "trcPort.h" - -extern volatile int recorder_busy; - -#define trcCRITICAL_SECTION_BEGIN() {taskENTER_CRITICAL(); recorder_busy++;} -#define trcCRITICAL_SECTION_END() {recorder_busy--; taskEXIT_CRITICAL();} - -#define NCLASSES 5 -#define VERSION 0x1AA1 -#define MINOR_VERSION 1 -#define STORE_MODE_STOP_WHEN_FULL 1 -#define STORE_MODE_RING_BUFFER 2 -#define TRACE_DATA_ALLOCATION_STATIC 1 -#define TRACE_DATA_ALLOCATION_DYNAMIC 2 - -/****************************************************************************** - * Object Property Table - * The Object Table contains name and other properties of the objects (tasks, - * queues, mutexes, etc). The below data structures defines the properties of - * each object class and are used to cast the byte buffer into a cleaner format. - * - * The values in the object table are continously overwritten and always - * represent the current state. If a property is changed during runtime, the OLD - * value should be stored in the trace buffer, not the new value (since the new - * value is found in the Object Property Table). - * For close events this mechanism is the old names are stored in the symbol - * table), for "priority set" (the old priority is stored in the event data) - * and for "isActive", where the value decides is the taskswitch event type - * should be "new" or "resume". - ******************************************************************************/ - -/* The size of the Object Property Table entries, in bytes, per object */ - -/* Queue properties (except name): current number of message in queue */ -#define PropertyTableSizeQueue (NameLenQueue + 1) - -/* Semaphore properties (except name): state (signaled = 1, cleared = 0) */ -#define PropertyTableSizeSemaphore (NameLenSemaphore + 1) - -/* Mutex properties (except name): owner (task handle, 0 = free) */ -#define PropertyTableSizeMutex (NameLenMutex + 1) - -/* Task properties (except name): Byte 0: Current priority - Byte 1: state (if already active) - Byte 2: InstanceFinishEvent_ServiceCode - Byte 3: InstanceFinishEvent_ObjHandle */ -#define PropertyTableSizeTask (NameLenTask + 4) - -/* ISR properties: Byte 0: priority - Byte 1: state (if already active) */ -#define PropertyTableSizeISR (NameLenISR + 2) - -/* The layout of the byte array representing the Object Property Table */ -#define StartIndexQueue 0 -#define StartIndexSemaphore StartIndexQueue + NQueue * PropertyTableSizeQueue -#define StartIndexMutex StartIndexSemaphore + NSemaphore * PropertyTableSizeSemaphore -#define StartIndexTask StartIndexMutex + NMutex * PropertyTableSizeMutex -#define StartIndexISR StartIndexTask + NTask * PropertyTableSizeTask -#define DynObjTableSize StartIndexISR + NISR * PropertyTableSizeISR - -typedef struct -{ - /* = NCLASSES */ - uint32_t NumberOfObjectClasses; - - uint32_t ObjectPropertyTableSizeInBytes; - - /* This is used to calculate the index in the dynamic object table - (handle - 1 - nofStaticObjects = index)*/ - uint8_t NumberOfObjectsPerClass[ 4*((NCLASSES+3)/4)]; - - /* Allocation size rounded up to the closest multiple of 4 */ - uint8_t NameLengthPerClass[ 4*((NCLASSES+3)/4) ]; - - uint8_t TotalPropertyBytesPerClass[ 4*((NCLASSES+3)/4) ]; - - /* Allocation size rounded up to the closest multiple of 2 */ - uint16_t StartIndexOfClass[ 2*((NCLASSES+1)/2) ]; - - /* The actual handles issued, should be Initiated to all zeros */ - uint8_t objbytes[ 4*((DynObjTableSize+3)/4) ]; -} ObjectPropertyTableType; - -/* Symbol table data structure */ -typedef struct -{ - /* = SYMBOL_HISTORY_TABLE_SIZE_IN_BYTES */ - uint32_t symTableSize; - - /* Entry 0 is reserved. Any reference to entry 0 implies NULL*/ - uint32_t nextFreeSymbolIndex; - - /* Size rounded up to closest multiple of 4, to avoid alignment issues*/ - uint8_t symbytes[4*((SYMBOL_TABLE_SIZE+3)/4)]; - - /* Used for lookups - Up to 64 linked lists within the symbol table - connecting all entries with the same 6 bit checksum. - This field holds the current list heads. Should be initiated to zeros */ - uint16_t latestEntryOfChecksum[64]; -} symbolTableType; - - -/******************************************************************************* - * The data structures of the different events, all 4 bytes long - ******************************************************************************/ - -typedef struct -{ - uint8_t type; - objectHandleType objHandle; - uint16_t dts; /* differential timestamp - time since last event */ -} TSEvent, TREvent; - -typedef struct -{ - uint8_t type; - uint8_t objHandle; - uint16_t dts; -} KernelCall; - -typedef struct -{ - uint8_t type; - objectHandleType objHandle; - uint8_t param; - uint8_t dts; -} KernelCallWithParamAndHandle; - -typedef struct -{ - uint8_t type; - uint8_t dts; - uint16_t param; -} KernelCallWithParam16; - -typedef struct -{ - uint8_t type; - objectHandleType objHandle; /* the handle of the closed object */ - uint16_t symbolIndex; /* the name of the closed object */ -} ObjCloseNameEvent; - -typedef struct -{ - uint8_t type; - uint8_t arg1; - uint8_t arg2; - uint8_t arg3; -} ObjClosePropEvent; - -typedef struct -{ - uint8_t type; - uint8_t dts; - uint16_t payload; /* the name of the user event */ -} UserEvent; - -typedef struct -{ - uint8_t type; - - /* 8 bits extra for storing DTS, if it does not fit in ordinary event - (this one is always MSB if used) */ - uint8_t xts_8; - - /* 16 bits extra for storing DTS, if it does not fit in ordinary event. */ - uint16_t xts_16; -} XTSEvent; - - -/******************************************************************************* - * The main datastructure, read by FreeRTOS+Trace from the RAM dump - ******************************************************************************/ - -typedef struct -{ - uint8_t startmarker0; - uint8_t startmarker1; - uint8_t startmarker2; - uint8_t startmarker3; - uint8_t startmarker4; - uint8_t startmarker5; - uint8_t startmarker6; - uint8_t startmarker7; - uint8_t startmarker8; - uint8_t startmarker9; - uint8_t startmarker10; - uint8_t startmarker11; - - /* For FreeRTOS: 0x1AA1 */ - uint16_t version; - - /* Currently 1 for v2.2.2 (0 earlier)*/ - uint8_t minor_version; - - /* This should be 0 if lower irq priority values implies higher priority - levels, such as on ARM Cortex M. If the opposite scheme is used, i.e., - if higher irq priority values means higher priority, this should be 1. */ - uint8_t irq_priority_order; - - /* sizeof(RecorderDataType) - just for control */ - uint32_t filesize; - - /* Current number of events recorded */ - uint32_t numEvents; - - /* The buffer size, in number of event records */ - uint32_t maxEvents; - - /* The event buffer index, where to write the next event */ - uint32_t nextFreeIndex; - - /* 1 if the buffer is full, 0 otherwise */ - uint32_t bufferIsFull; - - /* The frequency of the clock/timer/counter used as time base */ - uint32_t frequency; - - /* The absolute timestamp of the last stored event, in the native - timebase, modulo frequency! */ - uint32_t absTimeLastEvent; - - /* The number of seconds in total - lasts for 136 years */ - uint32_t absTimeLastEventSecond; - - /* 1 if the recorder has been started, 0 if not yet started or stopped. - This is a 32 bit variable due to alignment issues. */ - uint32_t recorderActive; - - /* For storing a Team License key */ - uint8_t teamLicenceKey[32]; - - /* 0xF0F0F0F0 - for control only */ - int32_t debugMarker0; - - /* The Object Property Table holds information about currently active - tasks, queues, and other recorded objects. This is updated on each - create call and includes object name and other properties. */ - ObjectPropertyTableType ObjectPropertyTable; - - /* 0xF1F1F1F1 - for control only */ - int32_t debugMarker1; - - /* The Symbol Table stores strings for User Events and is also used to - store names of deleted objects, which still may be in the trace but no - longer are available. */ - symbolTableType SymbolTable; - - /* For includsion of float support, and for endian detection of floats. - The value should be (float)1 or (uint32_t)0 */ -#if (INCLUDE_FLOAT_SUPPORT == 1) - float exampleFloatEncoding; -#else - uint32_t exampleFloatEncoding; -#endif - /* This is non-zero if an internal error occured in the recorder, e.g., if - one of the Nxxx constants was too small. The systemInfo string will then - contain an error message that is displayed when attempting to view the - trace file. */ - uint32_t internalErrorOccured; - - /* 0xF2F2F2F2 - for control only */ - int32_t debugMarker2; - - /* Generic system information string, presented in the tool. Note that this - is also used for storing any internal error messages from the recorder, so - do not make TRACE_DESCRIPTION_MAX_LENGTH too small. 80 is recommended. */ - char systemInfo[TRACE_DESCRIPTION_MAX_LENGTH]; - - /* 0xF3F3F3F3 - for control only */ - int32_t debugMarker3; - - /* The event data, in 4-byte records */ - uint8_t eventData[ EVENT_BUFFER_SIZE * 4 ]; - - uint8_t endmarker0; - uint8_t endmarker1; - uint8_t endmarker2; - uint8_t endmarker3; - uint8_t endmarker4; - uint8_t endmarker5; - uint8_t endmarker6; - uint8_t endmarker7; - uint8_t endmarker8; - uint8_t endmarker9; - uint8_t endmarker10; - uint8_t endmarker11; - -} RecorderDataType; - -extern RecorderDataType* RecorderDataPtr; - -/****************************************************************************** - * ObjectHandleStack - * This data-structure is used to provide a mechanism for 1-byte trace object - * handles. This way, only 1 byte is necessary instead of 4 bytes (a pointer) - * when storing a reference to an object. This allows for up to 255 objects of - * each object class - Task, ISR, Semaphore, CountingSemaphore, Mutex and Queue, - * active at any given moment. There can be more "historic" objects, that have - * been deleted - that number is only limited by the size of the symbol table. - * Note that handle zero (0) is not used, it is a code for an invalid handle. - * - * This data structure keeps track of the FREE handles, not the handles in use. - * This datastructure contains one stack per object class. When a handle is - * allocated to an object, the next free handle is popped from the stack. When - * a handle is released (on object delete), it is pushed back on the stack. - * Note that there is no initialization code that pushed the free handles - * initially, that is not necessary due to the following optimization: - * - * The stack of handles (objectHandles) is initially all zeros. Since zero - * is not a valid handle, that is a signal of additional handles needed. - * If a zero is received when popping a new handle, it is replaced by the - * index of the popped handle instead. - * - *****************************************************************************/ -typedef struct -{ - /* For each object class, the index of the next handle to allocate */ - int16_t indexOfNextAvailableHandle[ NCLASSES ]; - - /* The lowest index of this class (constant) */ - int16_t lowestIndexOfClass[ NCLASSES ]; - - /* The highest index of this class (constant) */ - int16_t highestIndexOfClass[ NCLASSES ]; - - /* The highest use count for this class (for statistics) */ - int16_t handleCountWaterMarksOfClass[ NCLASSES ]; - - /* The free object handles - a set of stacks within this array */ - objectHandleType objectHandles[ NTask+NISR+NSemaphore+NMutex+NQueue ]; - -} objectHandleStackType; - -/* Internal data */ - -extern objectHandleStackType objectHandleStacks; - -/* Structures to handle the exclude flags for all objects, tasks and event codes */ -#define NEventCodes 0x100 -extern uint8_t excludedFlags[(NEventCodes+NQueue+NSemaphore+NMutex+NTask) / 8 + 1]; -extern uint8_t ifeFlags[NTask / 8 + 1]; - -/* Internal functions */ - -uint16_t prvTraceGetDTS(uint16_t param_maxDTS); - -void prvTraceGetChecksum(const char *pname, uint8_t* pcrc, uint8_t* plength); - -traceLabel prvTraceCreateSymbolTableEntry(const char* name, - uint8_t crc6, - uint8_t len, - traceLabel channel); - -traceLabel prvTraceLookupSymbolTableEntry(const char* name, - uint8_t crc6, - uint8_t len, - traceLabel channel); - -traceLabel prvTraceOpenSymbol(const char* name, traceLabel userEventChannel); - -void prvTraceUpdateCounters(void); - -void prvCheckDataToBeOverwrittenForMultiEntryUserEvents(uint8_t nEntries); - -objectHandleType xTraceGetObjectHandle(traceObjectClass objectclass); - -void vTraceFreeObjectHandle(traceObjectClass objectclass, - objectHandleType handle); - -void vTraceSetObjectName(traceObjectClass objectclass, - objectHandleType handle, - const char* name); - -void* xTraceNextFreeEventBufferSlot(void); - -uint16_t uiIndexOfObject(objectHandleType objecthandle, - uint8_t objectclass); - - -/******************************************************************************* - * vTraceError - * - * Called by various parts in the recorder. Stops the recorder and stores a - * pointer to an error message, which is printed by the monitor task. - ******************************************************************************/ -void vTraceError(const char* msg); - -/******************************************************************************* - * xTraceGetLastError - * - * Gives the last error message, if any. NULL if no error message is stored. - * The message is cleared on read. - ******************************************************************************/ -char* xTraceGetLastError(void); - -/******************************************************************************* - * xTraceInitTraceData - * - * Allocates and initializes the recorder datastructure, based on the constants - * in trcConfig.h. This allows for allocating the data on the heap, instead of - * using a static declaration. - ******************************************************************************/ -RecorderDataType* xTraceInitTraceData(void); - -/* Internal macros */ - -#define PROPERTY_NAME_GET(objectclass, objecthandle) \ -(const char*)(& RecorderDataPtr->ObjectPropertyTable.objbytes \ -[uiIndexOfObject(objecthandle, objectclass)]) - -#define PROPERTY_OBJECT_STATE(objectclass, handle) \ -RecorderDataPtr->ObjectPropertyTable.objbytes[uiIndexOfObject(handle, objectclass) \ -+ RecorderDataPtr->ObjectPropertyTable.NameLengthPerClass[objectclass]] - -#define PROPERTY_ACTOR_PRIORITY(objectclass, handle) \ -RecorderDataPtr->ObjectPropertyTable.objbytes[uiIndexOfObject(handle, objectclass) \ -+ RecorderDataPtr->ObjectPropertyTable.NameLengthPerClass[objectclass] + 1] - -#define PROPERTY_TASK_IFE_SERVICECODE(handle) \ -RecorderDataPtr->ObjectPropertyTable.objbytes \ -[uiIndexOfObject(handle, TRACE_CLASS_TASK) \ -+ RecorderDataPtr->ObjectPropertyTable.NameLengthPerClass[TRACE_CLASS_TASK]+2] - -#define PROPERTY_TASK_IFE_OBJHANDLE(handle) \ -RecorderDataPtr->ObjectPropertyTable.objbytes \ -[uiIndexOfObject(handle, TRACE_CLASS_TASK) \ -+ RecorderDataPtr->ObjectPropertyTable.NameLengthPerClass[TRACE_CLASS_TASK]+3] - -#define SET_FLAG_ISEXCLUDED(bitIndex) excludedFlags[(bitIndex) >> 3] |= (1 << ((bitIndex) & 7)) -#define CLEAR_FLAG_ISEXCLUDED(bitIndex) excludedFlags[(bitIndex) >> 3] &= ~(1 << ((bitIndex) & 7)) -#define GET_FLAG_ISEXCLUDED(bitIndex) (excludedFlags[(bitIndex) >> 3] & (1 << ((bitIndex) & 7))) - -#define SET_FLAG_MARKIFE(bitIndex) ifeFlags[(bitIndex) >> 3] |= (1 << ((bitIndex) & 7)) -#define CLEAR_FLAG_MARKIFE(bitIndex) ifeFlags[(bitIndex) >> 3] &= ~(1 << ((bitIndex) & 7)) -#define GET_FLAG_MARKIFE(bitIndex) (ifeFlags[(bitIndex) >> 3] & (1 << ((bitIndex) & 7))) - -#define SET_EVENT_CODE_FLAG_ISEXCLUDED(eventCode) SET_FLAG_ISEXCLUDED(eventCode) -#define CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(eventCode) CLEAR_FLAG_ISEXCLUDED(eventCode) -#define GET_EVENT_CODE_FLAG_ISEXCLUDED(eventCode) GET_FLAG_ISEXCLUDED(eventCode) - -#define SET_QUEUE_FLAG_ISEXCLUDED(queueHandle) SET_FLAG_ISEXCLUDED(NEventCodes+queueHandle-1) -#define CLEAR_QUEUE_FLAG_ISEXCLUDED(queueHandle) CLEAR_FLAG_ISEXCLUDED(NEventCodes+queueHandle-1) -#define GET_QUEUE_FLAG_ISEXCLUDED(queueHandle) GET_FLAG_ISEXCLUDED(NEventCodes+queueHandle-1) - -#define SET_SEMAPHORE_FLAG_ISEXCLUDED(semaphoreHandle) SET_FLAG_ISEXCLUDED(NEventCodes+NQueue+semaphoreHandle-1) -#define CLEAR_SEMAPHORE_FLAG_ISEXCLUDED(semaphoreHandle) CLEAR_FLAG_ISEXCLUDED(NEventCodes+NQueue+semaphoreHandle-1) -#define GET_SEMAPHORE_FLAG_ISEXCLUDED(semaphoreHandle) GET_FLAG_ISEXCLUDED(NEventCodes+NQueue+semaphoreHandle-1) - -#define SET_MUTEX_FLAG_ISEXCLUDED(mutexHandle) SET_FLAG_ISEXCLUDED(NEventCodes+NQueue+NSemaphore+mutexHandle-1) -#define CLEAR_MUTEX_FLAG_ISEXCLUDED(mutexHandle) CLEAR_FLAG_ISEXCLUDED(NEventCodes+NQueue+NSemaphore+mutexHandle-1) -#define GET_MUTEX_FLAG_ISEXCLUDED(mutexHandle) GET_FLAG_ISEXCLUDED(NEventCodes+NQueue+NSemaphore+mutexHandle-1) - -#define SET_TASK_FLAG_ISEXCLUDED(taskHandle) SET_FLAG_ISEXCLUDED(NEventCodes+NQueue+NSemaphore+NMutex+taskHandle-1) -#define CLEAR_TASK_FLAG_ISEXCLUDED(taskHandle) CLEAR_FLAG_ISEXCLUDED(NEventCodes+NQueue+NSemaphore+NMutex+taskHandle-1) -#define GET_TASK_FLAG_ISEXCLUDED(taskHandle) GET_FLAG_ISEXCLUDED(NEventCodes+NQueue+NSemaphore+NMutex+taskHandle-1) - -#define SET_TASK_FLAG_MARKIFE(bitIndex) SET_FLAG_MARKIFE(bitIndex-1) -#define CLEAR_TASK_FLAG_MARKIFE(bitIndex) CLEAR_FLAG_MARKIFE(bitIndex-1) -#define GET_TASK_FLAG_MARKIFE(bitIndex) GET_FLAG_MARKIFE(bitIndex-1) - -/* For debug printouts - the names of the object classes */ -extern char OBJECTCLASSNAME[NCLASSES][10]; -/*= -{ - "QUEUE" - "SEMAPHORE", - "MUTEX", - "TASK", - "ISR" -};*/ - -#endif - diff --git a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Include/trcHooks.h b/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Include/trcHooks.h deleted file mode 100644 index 7876dff15..000000000 --- a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Include/trcHooks.h +++ /dev/null @@ -1,308 +0,0 @@ -/******************************************************************************* - * FreeRTOS+Trace v2.3.0 Recorder Library - * Percepio AB, www.percepio.com - * - * trcHooks.h - * - * The kernel integration hooks for FreeRTOS (v7.1.0 or later). This file should - * be included in the end of FreeRTOSConfig.h, together with: - * - * #define configUSE_TRACE_FACILITY 1 - * - * NOTE: - * For IAR Embedded Workbench for ARM, you need to have a preprocessor condition - * on the include, to except it from the assembler step which otherwise give - * compile-time errors. - * - * #ifdef __ICCARM__ - * #include "percepio/Include/trcHooks.h" - * #endif - * - * Terms of Use - * This software is copyright Percepio AB. The recorder library is free for - * use together with Percepio products. You may distribute the recorder library - * in its original form, including modifications in trcPort.c and trcPort.h - * given that these modification are clearly marked as your own modifications - * and documented in the initial comment section of these source files. - * This software is the intellectual property of Percepio AB and may not be - * sold or in other ways commercially redistributed without explicit written - * permission by Percepio AB. - * - * Disclaimer - * The trace tool and recorder library is being delivered to you AS IS and - * Percepio AB makes no warranty as to its use or performance. Percepio AB does - * not and cannot warrant the performance or results you may obtain by using the - * software or documentation. Percepio AB make no warranties, express or - * implied, as to noninfringement of third party rights, merchantability, or - * fitness for any particular purpose. In no event will Percepio AB, its - * technology partners, or distributors be liable to you for any consequential, - * incidental or special damages, including any lost profits or lost savings, - * even if a representative of Percepio AB has been advised of the possibility - * of such damages, or for any claim by any third party. Some jurisdictions do - * not allow the exclusion or limitation of incidental, consequential or special - * damages, or the exclusion of implied warranties or limitations on how long an - * implied warranty may last, so the above limitations may not apply to you. - * - * FreeRTOS+Trace is available as Free Edition and in two premium editions. - * You may use the premium features during 30 days for evaluation. - * Download FreeRTOS+Trace at http://www.percepio.com/products/downloads/ - * - * Copyright Percepio AB, 2012. - * www.percepio.com - ******************************************************************************/ - -#ifndef TRCHOOKS_H -#define TRCHOOKS_H - -#if (configUSE_TRACE_FACILITY == 1) - - #include "trcUser.h" - - #undef INCLUDE_xTaskGetSchedulerState - #define INCLUDE_xTaskGetSchedulerState 1 - - #undef INCLUDE_xTaskGetCurrentTaskHandle - #define INCLUDE_xTaskGetCurrentTaskHandle 1 - -#if !defined INCLUDE_READY_EVENTS || INCLUDE_READY_EVENTS == 1 - /* Called for each task that becomes ready */ - #undef traceMOVED_TASK_TO_READY_STATE - #define traceMOVED_TASK_TO_READY_STATE( pxTCB ) \ - vTraceStoreTaskReady((unsigned char)pxTCB->uxTaskNumber); -#endif - - /* Called on each OS tick. Will call uiPortGetTimestamp to make sure it is called at least once every OS tick. */ - #undef traceTASK_INCREMENT_TICK - #define traceTASK_INCREMENT_TICK( xTickCount ) \ - if (uxSchedulerSuspended == ( unsigned portBASE_TYPE ) pdTRUE || uxMissedTicks == 0) {extern uint32_t uiTraceTickCount; uiTraceTickCount++; uiTracePortGetTimeStamp(0);} - - /* Called on each task-switch */ - #undef traceTASK_SWITCHED_IN - #define traceTASK_SWITCHED_IN() \ - vTraceStoreTaskswitch(); - - /* Called on vTaskSuspend */ - #undef traceTASK_SUSPEND - #define traceTASK_SUSPEND( pxTaskToSuspend ) \ - vTraceStoreKernelCall(TASK_SUSPEND, TRACE_CLASS_TASK, pxTaskToSuspend->uxTaskNumber); \ - vTraceSetTaskInstanceFinished((uint8_t)pxTaskToSuspend->uxTaskNumber); - - /* Called on vTaskDelay - note the use of FreeRTOS variable xTicksToDelay */ - #undef traceTASK_DELAY - #define traceTASK_DELAY() \ - portENTER_CRITICAL(); \ - vTraceStoreKernelCallWithNumericParamOnly(TASK_DELAY, (uint16_t)xTicksToDelay);\ - vTraceSetTaskInstanceFinished((uint8_t)pxCurrentTCB->uxTaskNumber);\ - portEXIT_CRITICAL(); - - /* Called on vTaskDelayUntil - note the use of FreeRTOS variable xTimeToWake */ - #undef traceTASK_DELAY_UNTIL - #define traceTASK_DELAY_UNTIL() \ - portENTER_CRITICAL(); \ - vTraceStoreKernelCallWithNumericParamOnly(TASK_DELAY_UNTIL, (uint16_t)xTimeToWake); \ - vTraceSetTaskInstanceFinished((uint8_t)pxCurrentTCB->uxTaskNumber); \ - portEXIT_CRITICAL(); - -#ifndef INCLUDE_OBJECT_DELETE -#define INCLUDE_OBJECT_DELETE 0 -#endif - -#if (INCLUDE_OBJECT_DELETE == 1) - /* Called on vTaskDelete */ - #undef traceTASK_DELETE - #define traceTASK_DELETE( pxTaskToDelete ) \ - trcCRITICAL_SECTION_BEGIN(); \ - vTraceStoreKernelCall(EVENTGROUP_DELETE + TRACE_CLASS_TASK, TRACE_CLASS_TASK, pxTaskToDelete->uxTaskNumber); \ - vTraceStoreObjectNameOnCloseEvent((objectHandleType)pxTaskToDelete->uxTaskNumber, TRACE_CLASS_TASK); \ - vTraceStoreObjectPropertiesOnCloseEvent((objectHandleType)pxTaskToDelete->uxTaskNumber, TRACE_CLASS_TASK); \ - vTraceSetPriorityProperty(TRACE_CLASS_TASK, (objectHandleType)pxTaskToDelete->uxTaskNumber, (uint8_t)pxTaskToDelete->uxPriority); \ - vTraceSetObjectState(TRACE_CLASS_TASK, (objectHandleType)pxTaskToDelete->uxTaskNumber, TASK_STATE_INSTANCE_NOT_ACTIVE); \ - vTraceFreeObjectHandle(TRACE_CLASS_TASK, (objectHandleType)pxTaskToDelete->uxTaskNumber); \ - trcCRITICAL_SECTION_END(); -#endif - - /* Called on vTaskCreate */ - #undef traceTASK_CREATE - #define traceTASK_CREATE( pxNewTCB ) \ - if (pxNewTCB != NULL){ \ - pxNewTCB->uxTaskNumber = xTraceGetObjectHandle(TRACE_CLASS_TASK); \ - vTraceSetObjectName(TRACE_CLASS_TASK, (objectHandleType)pxNewTCB->uxTaskNumber, (char*)pxNewTCB->pcTaskName); \ - vTraceSetPriorityProperty(TRACE_CLASS_TASK, (objectHandleType)pxNewTCB->uxTaskNumber, (uint8_t)pxNewTCB->uxPriority); \ - vTraceStoreKernelCall(EVENTGROUP_CREATE + TRACE_CLASS_TASK, TRACE_CLASS_TASK, pxNewTCB->uxTaskNumber);\ - } - - /* Called in vTaskCreate, if it fails (typically if the stack can not be allocated) */ - #undef traceTASK_CREATE_FAILED - #define traceTASK_CREATE_FAILED() \ - portENTER_CRITICAL();\ - vTraceStoreKernelCall(EVENTGROUP_FAILED_CREATE + TRACE_CLASS_TASK, TRACE_CLASS_TASK, 0); \ - portEXIT_CRITICAL(); - - /* Called in xQueueCreate, and thereby for all other object based on queues, such as semaphores. */ - #undef traceQUEUE_CREATE - #define traceQUEUE_CREATE( pxNewQueue )\ - portENTER_CRITICAL(); \ - pxNewQueue->ucQueueNumber = xTraceGetObjectHandle(TraceObjectClassTable[pxNewQueue->ucQueueType]);\ - vTraceStoreKernelCall(EVENTGROUP_CREATE + TraceObjectClassTable[pxNewQueue->ucQueueType], TraceObjectClassTable[pxNewQueue->ucQueueType], pxNewQueue->ucQueueNumber); \ - vTraceSetObjectState(TraceObjectClassTable[pxNewQueue->ucQueueType], pxNewQueue->ucQueueNumber, 0); \ - portEXIT_CRITICAL(); - - /* Called in xQueueCreate, if the queue creation fails */ - #undef traceQUEUE_CREATE_FAILED - #define traceQUEUE_CREATE_FAILED( queueType ) \ - portENTER_CRITICAL();\ - vTraceStoreKernelCall((uint8_t)(EVENTGROUP_FAILED_CREATE + TraceObjectClassTable[queueType]), TraceObjectClassTable[queueType], 0); \ - portEXIT_CRITICAL(); - - /* Called in xQueueCreateMutex, and thereby also from xSemaphoreCreateMutex and xSemaphoreCreateRecursiveMutex */ - #undef traceCREATE_MUTEX - #define traceCREATE_MUTEX( pxNewQueue ) \ - portENTER_CRITICAL();\ - pxNewQueue->ucQueueNumber = xTraceGetObjectHandle(TRACE_CLASS_MUTEX); \ - vTraceStoreKernelCall(EVENTGROUP_CREATE + TraceObjectClassTable[pxNewQueue->ucQueueType], TraceObjectClassTable[pxNewQueue->ucQueueType], pxNewQueue->ucQueueNumber); \ - vTraceSetObjectState(TraceObjectClassTable[pxNewQueue->ucQueueType], pxNewQueue->ucQueueNumber, 0); \ - portEXIT_CRITICAL(); - - /* Called in xQueueCreateMutex when the operation fails (when memory allocation fails) */ - #undef traceCREATE_MUTEX_FAILED - #define traceCREATE_MUTEX_FAILED() \ - portENTER_CRITICAL();\ - vTraceStoreKernelCall(EVENTGROUP_FAILED_CREATE + TRACE_CLASS_MUTEX, TRACE_CLASS_MUTEX, 0);\ - portEXIT_CRITICAL(); - - /* Called when the Mutex can not be given, since not holder */ - #undef traceGIVE_MUTEX_RECURSIVE_FAILED - #define traceGIVE_MUTEX_RECURSIVE_FAILED( pxMutex ) \ - portENTER_CRITICAL();\ - vTraceStoreKernelCall(EVENTGROUP_FAILED_SEND + TRACE_CLASS_MUTEX, TRACE_CLASS_MUTEX, pxMutex->ucQueueNumber); \ - portEXIT_CRITICAL(); - - /* Called when a message is sent to a queue */ - #undef traceQUEUE_SEND - #define traceQUEUE_SEND( pxQueue ) \ - vTraceStoreKernelCall(EVENTGROUP_SEND + TraceObjectClassTable[pxQueue->ucQueueType], TraceObjectClassTable[pxQueue->ucQueueType], pxQueue->ucQueueNumber); \ - if (TraceObjectClassTable[pxQueue->ucQueueType] == TRACE_CLASS_MUTEX){\ - vTraceSetObjectState(TraceObjectClassTable[pxQueue->ucQueueType], (uint8_t)pxQueue->ucQueueNumber, (uint8_t)0); \ - }else{\ - vTraceSetObjectState(TraceObjectClassTable[pxQueue->ucQueueType], (uint8_t)pxQueue->ucQueueNumber, (uint8_t)(pxQueue->uxMessagesWaiting + 1)); \ - } - - /* Called when a message failed to be sent to a queue (timeout) */ - #undef traceQUEUE_SEND_FAILED - #define traceQUEUE_SEND_FAILED( pxQueue ) \ - portENTER_CRITICAL();\ - vTraceStoreKernelCall(EVENTGROUP_FAILED_SEND + TraceObjectClassTable[pxQueue->ucQueueType], TraceObjectClassTable[pxQueue->ucQueueType], pxQueue->ucQueueNumber); \ - portEXIT_CRITICAL(); - - /* Called when the task is blocked due to a send operation on a full queue */ - #undef traceBLOCKING_ON_QUEUE_SEND - #define traceBLOCKING_ON_QUEUE_SEND( pxQueue ) \ - portENTER_CRITICAL();\ - vTraceStoreKernelCall(EVENTGROUP_BLOCK_ON_SEND + TraceObjectClassTable[pxQueue->ucQueueType], TraceObjectClassTable[pxQueue->ucQueueType], pxQueue->ucQueueNumber); \ - portEXIT_CRITICAL(); - - /* Called when a message is received from a queue */ - #undef traceQUEUE_RECEIVE - #define traceQUEUE_RECEIVE( pxQueue ) \ - vTraceStoreKernelCall(EVENTGROUP_RECEIVE + TraceObjectClassTable[pxQueue->ucQueueType], TraceObjectClassTable[pxQueue->ucQueueType], pxQueue->ucQueueNumber); \ - if (TraceObjectClassTable[pxQueue->ucQueueType] == TRACE_CLASS_MUTEX){\ - extern volatile void * volatile pxCurrentTCB; \ - vTraceSetObjectState(TraceObjectClassTable[pxQueue->ucQueueType], (objectHandleType)pxQueue->ucQueueNumber, (objectHandleType)uxTaskGetTaskNumber((xTaskHandle)pxCurrentTCB)); /*For mutex, store the new owner rather than queue length */ \ - }else{\ - vTraceSetObjectState(TraceObjectClassTable[pxQueue->ucQueueType], (objectHandleType)pxQueue->ucQueueNumber, (uint8_t)(pxQueue->uxMessagesWaiting - 1)); \ - } - - /* Called when the task is blocked due to a receive operation on an empty queue */ - #undef traceBLOCKING_ON_QUEUE_RECEIVE - #define traceBLOCKING_ON_QUEUE_RECEIVE( pxQueue ) \ - portENTER_CRITICAL(); \ - vTraceStoreKernelCall(EVENTGROUP_BLOCK_ON_RECEIVE + TraceObjectClassTable[pxQueue->ucQueueType], TraceObjectClassTable[pxQueue->ucQueueType], pxQueue->ucQueueNumber); \ - if (TraceObjectClassTable[pxQueue->ucQueueType] != TRACE_CLASS_MUTEX){\ - extern volatile void * volatile pxCurrentTCB; \ - vTraceSetTaskInstanceFinished((objectHandleType)uxTaskGetTaskNumber((xTaskHandle)pxCurrentTCB)); \ - }\ - portEXIT_CRITICAL(); - - /* Called on xQueuePeek */ - #undef traceQUEUE_PEEK - #define traceQUEUE_PEEK( pxQueue ) \ - vTraceStoreKernelCall(EVENTGROUP_PEEK + TraceObjectClassTable[pxQueue->ucQueueType], TraceObjectClassTable[pxQueue->ucQueueType], pxQueue->ucQueueNumber); - - /* Called when a receive operation on a queue fails (timeout) */ - #undef traceQUEUE_RECEIVE_FAILED - #define traceQUEUE_RECEIVE_FAILED( pxQueue ) \ - portENTER_CRITICAL(); \ - vTraceStoreKernelCall(EVENTGROUP_FAILED_RECEIVE + TraceObjectClassTable[pxQueue->ucQueueType], TraceObjectClassTable[pxQueue->ucQueueType], pxQueue->ucQueueNumber); \ - portEXIT_CRITICAL(); - - /* Called when a message is sent from interrupt context, e.g., using xQueueSendFromISR */ - #undef traceQUEUE_SEND_FROM_ISR - #define traceQUEUE_SEND_FROM_ISR( pxQueue ) \ - vTraceStoreKernelCall(EVENTGROUP_SEND_FROM_ISR + TraceObjectClassTable[pxQueue->ucQueueType], TraceObjectClassTable[pxQueue->ucQueueType], pxQueue->ucQueueNumber); \ - vTraceSetObjectState(TraceObjectClassTable[pxQueue->ucQueueType], (objectHandleType)pxQueue->ucQueueNumber, (uint8_t)(pxQueue->uxMessagesWaiting + 1)); - - /* Called when a message send from interrupt context fails (since the queue was full) */ - #undef traceQUEUE_SEND_FROM_ISR_FAILED - #define traceQUEUE_SEND_FROM_ISR_FAILED( pxQueue ) \ - vTraceStoreKernelCall(EVENTGROUP_FAILED_SEND_FROM_ISR + TraceObjectClassTable[pxQueue->ucQueueType], TraceObjectClassTable[pxQueue->ucQueueType], pxQueue->ucQueueNumber); - - /* Called when a message is received in interrupt context, e.g., using xQueueReceiveFromISR */ - #undef traceQUEUE_RECEIVE_FROM_ISR - #define traceQUEUE_RECEIVE_FROM_ISR( pxQueue ) \ - vTraceStoreKernelCall(EVENTGROUP_RECEIVE_FROM_ISR + TraceObjectClassTable[pxQueue->ucQueueType], TraceObjectClassTable[pxQueue->ucQueueType], pxQueue->ucQueueNumber); \ - vTraceSetObjectState(TraceObjectClassTable[pxQueue->ucQueueType], (objectHandleType)pxQueue->ucQueueNumber, (uint8_t)(pxQueue->uxMessagesWaiting - 1)); - - /* Called when a message receive from interrupt context fails (since the queue was empty) */ - #undef traceQUEUE_RECEIVE_FROM_ISR_FAILED - #define traceQUEUE_RECEIVE_FROM_ISR_FAILED( pxQueue ) \ - vTraceStoreKernelCall(EVENTGROUP_FAILED_RECEIVE_FROM_ISR + TraceObjectClassTable[pxQueue->ucQueueType], TraceObjectClassTable[pxQueue->ucQueueType], pxQueue->ucQueueNumber); - -#if (INCLUDE_OBJECT_DELETE == 1) - /* Called on vQueueDelete */ - #undef traceQUEUE_DELETE - #define traceQUEUE_DELETE( pxQueue ) \ - { \ - portENTER_CRITICAL();\ - vTraceStoreKernelCall(EVENTGROUP_DELETE + TraceObjectClassTable[pxQueue->ucQueueType], TraceObjectClassTable[pxQueue->ucQueueType], pxQueue->ucQueueNumber); \ - vTraceStoreObjectNameOnCloseEvent((objectHandleType)pxQueue->ucQueueNumber, TraceObjectClassTable[pxQueue->ucQueueType]); \ - vTraceStoreObjectPropertiesOnCloseEvent((objectHandleType)pxQueue->ucQueueNumber, TraceObjectClassTable[pxQueue->ucQueueType]); \ - if (TraceObjectClassTable[pxQueue->ucQueueType] == TRACE_CLASS_MUTEX){ \ - vTraceSetObjectState(TraceObjectClassTable[pxQueue->ucQueueType], (objectHandleType)pxQueue->ucQueueNumber, (objectHandleType)uxTaskGetTaskNumber((xTaskHandle)pxQueue->pxMutexHolder)); \ - }else{ \ - vTraceSetObjectState(TraceObjectClassTable[pxQueue->ucQueueType], (objectHandleType)pxQueue->ucQueueNumber, (uint8_t)uxQueueMessagesWaiting(pxQueue)); \ - } \ - vTraceFreeObjectHandle(TraceObjectClassTable[pxQueue->ucQueueType], (objectHandleType)pxQueue->ucQueueNumber); \ - portEXIT_CRITICAL();\ - } -#endif - - /* Called in vTaskPrioritySet */ - #undef traceTASK_PRIORITY_SET - #define traceTASK_PRIORITY_SET( pxTask, uxNewPriority ) \ - vTraceStoreKernelCallWithParam(TASK_PRIORITY_SET, TRACE_CLASS_TASK, pxTask->uxTaskNumber, uiTraceGetPriorityProperty(TRACE_CLASS_TASK, (uint8_t)pxTask->uxTaskNumber));\ - vTraceSetPriorityProperty( TRACE_CLASS_TASK, (uint8_t)pxTask->uxTaskNumber, (uint8_t)uxNewPriority); - - /* Called in vTaskPriorityInherit, which is called by Mutex operations */ - #undef traceTASK_PRIORITY_INHERIT - #define traceTASK_PRIORITY_INHERIT( pxTask, uxNewPriority ) \ - vTraceStoreKernelCallWithParam(TASK_PRIORITY_INHERIT, TRACE_CLASS_TASK, pxTask->uxTaskNumber, uiTraceGetPriorityProperty(TRACE_CLASS_TASK, (uint8_t)pxTask->uxTaskNumber));\ - vTraceSetPriorityProperty( TRACE_CLASS_TASK, (uint8_t)pxTask->uxTaskNumber, (uint8_t)uxNewPriority ); - - /* Called in vTaskPriorityDisinherit, which is called by Mutex operations */ - #undef traceTASK_PRIORITY_DISINHERIT - #define traceTASK_PRIORITY_DISINHERIT( pxTask, uxNewPriority ) \ - vTraceStoreKernelCallWithParam(TASK_PRIORITY_DISINHERIT, TRACE_CLASS_TASK, pxTask->uxTaskNumber, uiTraceGetPriorityProperty(TRACE_CLASS_TASK, (uint8_t)pxTask->uxTaskNumber));\ - vTraceSetPriorityProperty( TRACE_CLASS_TASK, (uint8_t)pxTask->uxTaskNumber, (uint8_t)uxNewPriority ); - - /* Called in vTaskResume */ - #undef traceTASK_RESUME - #define traceTASK_RESUME( pxTaskToResume ) \ - vTraceStoreKernelCall(TASK_RESUME, TRACE_CLASS_TASK, pxTaskToResume->uxTaskNumber); - - /* Called in vTaskResumeFromISR */ - #undef traceTASK_RESUME_FROM_ISR - #define traceTASK_RESUME_FROM_ISR( pxTaskToResume )\ - vTraceStoreKernelCall(TASK_RESUME_FROM_ISR, TRACE_CLASS_TASK, pxTaskToResume->uxTaskNumber); - -#endif -#endif diff --git a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Include/trcKernel.h b/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Include/trcKernel.h deleted file mode 100644 index c81db92e1..000000000 --- a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Include/trcKernel.h +++ /dev/null @@ -1,274 +0,0 @@ -/******************************************************************************* - * FreeRTOS+Trace v2.3.0 Recorder Library - * Percepio AB, www.percepio.com - * - * trcKernel.h - * - * Functions used by trcHooks.h, for the FreeRTOS kernel integration. - * - * Terms of Use - * This software is copyright Percepio AB. The recorder library is free for - * use together with Percepio products. You may distribute the recorder library - * in its original form, including modifications in trcPort.c and trcPort.h - * given that these modification are clearly marked as your own modifications - * and documented in the initial comment section of these source files. - * This software is the intellectual property of Percepio AB and may not be - * sold or in other ways commercially redistributed without explicit written - * permission by Percepio AB. - * - * Disclaimer - * The trace tool and recorder library is being delivered to you AS IS and - * Percepio AB makes no warranty as to its use or performance. Percepio AB does - * not and cannot warrant the performance or results you may obtain by using the - * software or documentation. Percepio AB make no warranties, express or - * implied, as to noninfringement of third party rights, merchantability, or - * fitness for any particular purpose. In no event will Percepio AB, its - * technology partners, or distributors be liable to you for any consequential, - * incidental or special damages, including any lost profits or lost savings, - * even if a representative of Percepio AB has been advised of the possibility - * of such damages, or for any claim by any third party. Some jurisdictions do - * not allow the exclusion or limitation of incidental, consequential or special - * damages, or the exclusion of implied warranties or limitations on how long an - * implied warranty may last, so the above limitations may not apply to you. - * - * FreeRTOS+Trace is available as Free Edition and in two premium editions. - * You may use the premium features during 30 days for evaluation. - * Download FreeRTOS+Trace at http://www.percepio.com/products/downloads/ - * - * Copyright Percepio AB, 2012. - * www.percepio.com - ******************************************************************************/ - -#ifndef TRCKERNEL_H -#define TRCKERNEL_H - -#include "trcBase.h" - -/* Internal functions */ - - -#if !defined INCLUDE_READY_EVENTS || INCLUDE_READY_EVENTS == 1 -void vTraceStoreTaskReady(objectHandleType handle); -#endif - -void vTraceStoreTaskswitch(void); - -void vTraceStoreKernelCall(uint32_t eventcode, traceObjectClass objectClass, uint32_t byteParam); - -void vTraceStoreKernelCallWithNumericParamOnly(uint32_t evtcode, - uint16_t param); - -void vTraceStoreKernelCallWithParam(uint32_t evtcode, traceObjectClass objectClass, - uint32_t objectNumber, uint8_t param); - -void vTraceSetTaskInstanceFinished(objectHandleType handle); - -void vTraceSetPriorityProperty(uint8_t objectclass, uint8_t id, uint8_t value); - -uint8_t uiTraceGetPriorityProperty(uint8_t objectclass, uint8_t id); - -void vTraceSetObjectState(uint8_t objectclass, uint8_t id, uint8_t value); - -uint8_t uiTraceGetObjectState(uint8_t objectclass, uint8_t id); - -#if (INCLUDE_OBJECT_DELETE == 1) - -void vTraceStoreObjectNameOnCloseEvent(objectHandleType handle, - traceObjectClass objectclass); - -void vTraceStoreObjectPropertiesOnCloseEvent(objectHandleType handle, - traceObjectClass objectclass); -#endif - -/* Internal constants for task state */ -#define TASK_STATE_INSTANCE_NOT_ACTIVE 0 -#define TASK_STATE_INSTANCE_ACTIVE 1 -#define TASK_STATE_INSTANCE_MARKED_FINISHED 2 - -extern objectHandleType handle_of_running_task; - -/* This defines the mapping between FreeRTOS queue types and our internal -class IDs */ -extern traceObjectClass TraceObjectClassTable[5]; - -/******************************************************************************* - * The event codes - should match the offline config file. - * - * Some sections below are encoded to allow for constructions like: - * - * vTraceStoreKernelCall(EVENTGROUP_CREATE + objectclass, ... - * - * The object class ID is given by the three LSB bits, in such cases. Since each - * object class has a separate object property table, the class ID is needed to - * know what section in the object table to use for getting an object name from - * an object handle. - ******************************************************************************/ - -#define NULL_EVENT (0x00) /* Ignored in the analysis*/ - -/******************************************************************************* - * EVENTGROUP_RE - * - * Events that indicate that something is ready to execute. - ******************************************************************************/ -#define EVENTGROUP_RE (NULL_EVENT + 2) /*0x02*/ -#define TR_TASK_READY (EVENTGROUP_RE + 0) /*0x02*/ - -/******************************************************************************* - * EVENTGROUP_TS - * - * Events for storing task-switches and interrupts. The RESUME events are - * generated if the task/interrupt is already marked active. - ******************************************************************************/ -#define EVENTGROUP_TS (EVENTGROUP_RE + 2) /*0x04*/ -#define TS_ISR_BEGIN (EVENTGROUP_TS + 0) /*0x04*/ -#define TS_ISR_RESUME (EVENTGROUP_TS + 1) /*0x05*/ -#define TS_TASK_BEGIN (EVENTGROUP_TS + 2) /*0x06*/ -#define TS_TASK_RESUME (EVENTGROUP_TS + 3) /*0x07*/ - -/******************************************************************************* - * EVENTGROUP_OBJCLOSE_NAME - * - * About Close Events - * When an object is evicted from the object property table (object close), two - * internal events are stored (EVENTGROUP_OBJCLOSE_NAME and - * EVENTGROUP_OBJCLOSE_PROP), containg the handle-name mapping and object - * properties valid up to this point. - ******************************************************************************/ -#define EVENTGROUP_OBJCLOSE_NAME (EVENTGROUP_TS + 4) /*0x08*/ - -/******************************************************************************* - * EVENTGROUP_OBJCLOSE_PROP - * - * The internal event carrying properties of deleted objects - * The handle and object class of the closed object is not stored in this event, - * but is assumed to be the same as in the preceeding CLOSE event. Thus, these - * two events must be generated from within a critical section. - * When queues are closed, arg1 is the "state" property (i.e., number of - * buffered messages/signals). - * When actors are closed, arg1 is priority, arg2 is handle of the "instance - * finish" event, and arg3 is event code of the "instance finish" event. - * In this case, the lower three bits is the object class of the instance finish - * handle. The lower three bits are not used (always zero) when queues are - * closed since the queue type is given in the previous OBJCLOSE_NAME event. - ******************************************************************************/ -#define EVENTGROUP_OBJCLOSE_PROP (EVENTGROUP_OBJCLOSE_NAME + 8) /*0x10*/ - -/******************************************************************************* - * EVENTGROUP_CREATE - * - * The events in this group are used to log Kernel object creations. - * The lower three bits in the event code gives the object class, i.e., type of - * create operation (task, queue, semaphore, etc). - ******************************************************************************/ -#define EVENTGROUP_CREATE (EVENTGROUP_OBJCLOSE_PROP + 8) /*0x18*/ - -/******************************************************************************* - * EVENTGROUP_SEND - * - * The events in this group are used to log Send/Give events on queues, - * semaphores and mutexeds The lower three bits in the event code gives the - * object class, i.e., what type of object that is operated on (queue, semaphore - * or mutex). - ******************************************************************************/ -#define EVENTGROUP_SEND (EVENTGROUP_CREATE + 8) /*0x20*/ - -/******************************************************************************* - * EVENTGROUP_RECEIVE - * - * The events in this group are used to log Receive/Take events on queues, - * semaphores and mutexes. The lower three bits in the event code gives the - * object class, i.e., what type of object that is operated on (queue, semaphore - * or mutex). - ******************************************************************************/ -#define EVENTGROUP_RECEIVE (EVENTGROUP_SEND + 8) /*0x28*/ - -/* Send/Give operations, from ISR */ -#define EVENTGROUP_SEND_FROM_ISR (EVENTGROUP_RECEIVE + 8) /*0x30*/ - -/* Receive/Take operations, from ISR */ -#define EVENTGROUP_RECEIVE_FROM_ISR (EVENTGROUP_SEND_FROM_ISR + 8) /*0x38*/ - -/* "Failed" event type versions of above (timeout, failed allocation, etc) */ -#define EVENTGROUP_FAILED_KSE (EVENTGROUP_RECEIVE_FROM_ISR + 8) /*0x40*/ - -/* Failed create calls - memory allocation failed */ -#define EVENTGROUP_FAILED_CREATE (EVENTGROUP_FAILED_KSE) /*0x40*/ - -/* Failed send/give - timeout! */ -#define EVENTGROUP_FAILED_SEND (EVENTGROUP_FAILED_CREATE + 8) /*0x48*/ - -/* Failed receive/take - timeout! */ -#define EVENTGROUP_FAILED_RECEIVE (EVENTGROUP_FAILED_SEND + 8) /*0x50*/ - -/* Failed non-blocking send/give - queue full */ -#define EVENTGROUP_FAILED_SEND_FROM_ISR (EVENTGROUP_FAILED_RECEIVE + 8) /*0x58*/ - -/* Failed non-blocking receive/take - queue empty */ -#define EVENTGROUP_FAILED_RECEIVE_FROM_ISR \ - (EVENTGROUP_FAILED_SEND_FROM_ISR + 8) /*0x60*/ - -/* Events when blocking on receive/take */ -#define EVENTGROUP_BLOCK_ON_RECEIVE \ - (EVENTGROUP_FAILED_RECEIVE_FROM_ISR + 8) /*0x68*/ - -/* Events when blocking on send/give */ -#define EVENTGROUP_BLOCK_ON_SEND (EVENTGROUP_BLOCK_ON_RECEIVE + 8) /*0x70*/ - -/* Events on queue peek (receive) */ -#define EVENTGROUP_PEEK (EVENTGROUP_BLOCK_ON_SEND + 8) /*0x78*/ - -/* Events on object delete (vTaskDelete or vQueueDelete) */ -#define EVENTGROUP_DELETE (EVENTGROUP_PEEK + 8) /*0x80*/ - -/* Other events - object class is implied: TASK */ -#define EVENTGROUP_OTHERS (EVENTGROUP_DELETE + 8) /*0x88*/ -#define TASK_DELAY_UNTIL (EVENTGROUP_OTHERS + 0) /*0x88*/ -#define TASK_DELAY (EVENTGROUP_OTHERS + 1) /*0x89*/ -#define TASK_SUSPEND (EVENTGROUP_OTHERS + 2) /*0x8A*/ -#define TASK_RESUME (EVENTGROUP_OTHERS + 3) /*0x8B*/ -#define TASK_RESUME_FROM_ISR (EVENTGROUP_OTHERS + 4) /*0x8C*/ -#define TASK_PRIORITY_SET (EVENTGROUP_OTHERS + 5) /*0x8D*/ -#define TASK_PRIORITY_INHERIT (EVENTGROUP_OTHERS + 6) /*0x8E*/ -#define TASK_PRIORITY_DISINHERIT (EVENTGROUP_OTHERS + 7) /*0x8F*/ - -/* Not yet used */ -#define EVENTGROUP_FTRACE_PLACEHOLDER (EVENTGROUP_OTHERS + 8) /*0x90*/ - -/* User events */ -#define EVENTGROUP_USEREVENT (EVENTGROUP_FTRACE_PLACEHOLDER + 8) /*0x98*/ -#define USER_EVENT (EVENTGROUP_USEREVENT + 0) - -/* Allow for 0-15 arguments (the number of args is added to event code) */ -#define USER_EVENT_LAST (EVENTGROUP_USEREVENT + 15) /*0xA7*/ - -/******************************************************************************* - * XTS Event - eXtended TimeStamp events - * The timestamps used in the recorder are "differential timestamps" (DTS), i.e. - * the time since the last stored event. The DTS fields are either 1 or 2 bytes - * in the other events, depending on the bytes available in the event struct. - * If the time since the last event (the DTS) is larger than allowed for by - * the DTS field of the current event, an XTS event is inserted immidiatly - * before the original event. The XTS event contains up to 3 additional bytes - * of the DTS value - the higher bytes of the true DTS value. The lower 1-2 - * bytes are stored in the normal DTS field. - * There are two types of XTS events, XTS8 and XTS16. An XTS8 event is stored - * when there is only room for 1 byte (8 bit) DTS data in the original event, - * which means a limit of 0xFF (255). The XTS16 is used when the original event - * has a 16 bit DTS field and thereby can handle values up to 0xFFFF (65535). - * - * Using a very high frequency time base can result in many XTS events. - * Preferably, the time between two OS ticks should fit in 16 bits, i.e., - * at most 65535. If your time base has a higher frequency, you can define - * the TRACE - ******************************************************************************/ - -#define EVENTGROUP_SYS (EVENTGROUP_USEREVENT + 16) /*0xA8*/ -#define XTS8 (EVENTGROUP_SYS + 0) /*0xA8*/ -#define XTS16 (EVENTGROUP_SYS + 1) /*0xA9*/ - -#define EVENT_BEING_WRITTEN (EVENTGROUP_SYS + 2) /*0xAA*/ - -#define RESERVED_DUMMY_CODE (EVENTGROUP_SYS + 3) /*0xAB*/ - -#endif diff --git a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Include/trcPort.h b/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Include/trcPort.h deleted file mode 100644 index 368187a91..000000000 --- a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Include/trcPort.h +++ /dev/null @@ -1,492 +0,0 @@ -/******************************************************************************* - * FreeRTOS+Trace v2.3.0 Recorder Library - * Percepio AB, www.percepio.com - * - * trcPort.h - * - * Contains together with trcPort.c all portability issues of the trace recorder - * library. - * - * Terms of Use - * This software is copyright Percepio AB. The recorder library is free for - * use together with Percepio products. You may distribute the recorder library - * in its original form, including modifications in trcPort.c and trcPort.h - * given that these modification are clearly marked as your own modifications - * and documented in the initial comment section of these source files. - * This software is the intellectual property of Percepio AB and may not be - * sold or in other ways commercially redistributed without explicit written - * permission by Percepio AB. - * - * Disclaimer - * The trace tool and recorder library is being delivered to you AS IS and - * Percepio AB makes no warranty as to its use or performance. Percepio AB does - * not and cannot warrant the performance or results you may obtain by using the - * software or documentation. Percepio AB make no warranties, express or - * implied, as to noninfringement of third party rights, merchantability, or - * fitness for any particular purpose. In no event will Percepio AB, its - * technology partners, or distributors be liable to you for any consequential, - * incidental or special damages, including any lost profits or lost savings, - * even if a representative of Percepio AB has been advised of the possibility - * of such damages, or for any claim by any third party. Some jurisdictions do - * not allow the exclusion or limitation of incidental, consequential or special - * damages, or the exclusion of implied warranties or limitations on how long an - * implied warranty may last, so the above limitations may not apply to you. - * - * FreeRTOS+Trace is available as Free Edition and in two premium editions. - * You may use the premium features during 30 days for evaluation. - * Download FreeRTOS+Trace at http://www.percepio.com/products/downloads/ - * - * Copyright Percepio AB, 2012. - * www.percepio.com - ******************************************************************************/ - -#ifndef TRCPORT_H -#define TRCPORT_H - -/* If FreeRTOS Win32 port */ -#ifdef WIN32 - - #undef _WIN32_WINNT - #define _WIN32_WINNT 0x0600 - - /* Standard includes. */ - #include - #include - #include - -/******************************************************************************* - * The Win32 port by default saves the trace to file and then kills the - * program when the recorder is stopped, to facilitate quick, simple tests - * of the recorder. - ******************************************************************************/ - #define WIN32_PORT_SAVE_WHEN_STOPPED 1 - #define WIN32_PORT_EXIT_WHEN_STOPPED 1 -#else - #define WIN32_PORT_SAVE_WHEN_STOPPED 0 - #define WIN32_PORT_EXIT_WHEN_STOPPED 0 -#endif - -#define DIRECTION_INCREMENTING 1 -#define DIRECTION_DECREMENTING 2 - -/****************************************************************************** - * Supported ports - * - * PORT_HWIndependent - * A hardware independent fallback option for event timestamping. Provides low - * resolution timestamps based on the OS tick. - * This may be used on the Win32 port, but may also be used on embedded hardware - * platforms. Note that this gives suboptimal display in FreeRTOS+Trace. All - * time durations will be truncated to the OS tick frequency, typically 1 KHz. - * This means that a task or ISR that executes in less than 1 ms get an exection - * time of zero. They are however still visible in FreeRTOS+Trace. - * - * PORT_Win32 - * "Accurate" timestamping based on the Windows permance counter. Note that - * this gives the host machine time, not the simulated FreeRTOS time (tick - * count). The timing of the Win32 FreeRTOS build is not real-time, since it - * depends on the scheduling and tick rate of Windows, which is very slow. - * - * Officially supported hardware timer ports: - * - PORT_Atmel_AT91SAM7 - * - PORT_Atmel_UC3A0 - * - PORT_ARM_CortexM - * - PORT_Renesas_RX600 - * - PORT_Microchip_dsPIC_AND_PIC24 - * - * We also provide several "unofficial" hardware-specific ports. There have - * been developed by external contributors, and have not yet been verified - * by Percepio AB. Let us know if you have problems getting these to work. - * - * Unoffical hardware specific ports provided are: - * - PORT_TEXAS_INSTRUMENTS_TMS570 - * - PORT_TEXAS_INSTRUMENTS_MSP430 - * - PORT_MICROCHIP_PIC32 - * - PORT_XILINX_PPC405 - * - PORT_XILINX_PPC440 - * - PORT_XILINX_MICROBLAZE - * - PORT_NXP_LPC210X - * - *****************************************************************************/ - -#define PORT_NOT_SET -1 - -/*** Officially supported hardware timer ports *******************************/ -#define PORT_HWIndependent 0 -#define PORT_Win32 1 -#define PORT_Atmel_AT91SAM7 2 -#define PORT_Atmel_UC3A0 3 -#define PORT_ARM_CortexM 4 -#define PORT_Renesas_RX600 5 -#define PORT_Microchip_dsPIC_AND_PIC24 6 - -/*** Unofficial ports, provided by external developers, not yet verified *****/ -#define PORT_TEXAS_INSTRUMENTS_TMS570 7 -#define PORT_TEXAS_INSTRUMENTS_MSP430 8 -#define PORT_MICROCHIP_PIC32 9 -#define PORT_XILINX_PPC405 10 -#define PORT_XILINX_PPC440 11 -#define PORT_XILINX_MICROBLAZE 12 -#define PORT_NXP_LPC210X 13 - -/*** Select your port here! **************************************************/ -#define SELECTED_PORT PORT_ARM_CortexM -/*****************************************************************************/ - -#if (SELECTED_PORT == PORT_NOT_SET) -#error "You need to define SELECTED_PORT here!" -#endif - -/******************************************************************************* - * IRQ_PRIORITY_ORDER - * - * Macro which should be defined as an integer of 0 or 1. - * - * This should be 0 if lower irq priority values implies higher priority - * levels, such as on ARM Cortex M. If the opposite scheme is used, i.e., - * if higher irq priority values means higher priority, this should be 1. - * - * This setting is not critical. It is used only to sort and colorize the - * interrupts in priority order, in case you record interrupts using - * the vTraceStoreISRBegin and vTraceStoreISREnd routines. - * - * We provide this setting for some hardware architectures below: - * - ARM Cortex M: 0 (lower irq priority values are more significant) - * - Atmel AT91SAM7x: 1 (higher irq priority values are more significant) - * - Atmel AVR32: 1 (higher irq priority values are more significant) - * - Renesas RX600: 1 (higher irq priority values are more significant) - * - Microchip PIC24: 0 (lower irq priority values are more significant) - * - Microchip dsPIC: 0 (lower irq priority values are more significant) - * - TI TMS570: 0 (lower irq priority values are more significant) - * - Freescale HCS08: 0 (lower irq priority values are more significant) - * - Freescale HCS12: 0 (lower irq priority values are more significant) - * - PowerPC 405: 0 (lower irq priority values are more significant) - * - PowerPC 440: 0 (lower irq priority values are more significant) - * - Freescale ColdFire: 1 (higher irq priority values are more significant) - * - NXP LPC210x: 0 (lower irq priority values are more significant) - * - MicroBlaze: 0 (lower irq priority values are more significant) - * - * If your chip is not on the above list, and you perhaps know this detail by - * heart, please inform us by e-mail to support@percepio.com. - * - ****************************************************************************** - * - * HWTC Macros - * - * These four HWTC macros provides a hardware isolation layer representing a - * generic hardware timer/counter used for driving the operating system tick, - * such as the SysTick feature of ARM Cortex M3/M4, or the PIT of the Atmel - * AT91SAM7X. - * - * HWTC_COUNT: The current value of the counter. This is expected to be reset - * a each tick interrupt. Thus, when the tick handler starts, the counter has - * already wrapped. - * - * HWTC_COUNT_DIRECTION: Should be one of: - * - DIRECTION_INCREMENTING - for hardware timer/counters of incrementing type - * such as the PIT on Atmel AT91SAM7X. - * When the counter value reach HWTC_PERIOD, it is reset to zero and the - * interrupt is signaled. - * - DIRECTION_DECREMENTING - for hardware timer/counters of decrementing type - * such as the SysTick on ARM Cortex M3/M4 chips. - * When the counter value reach 0, it is reset to HWTC_PERIOD and the - * interrupt is signaled. - * - * HWTC_PERIOD: The number of increments or decrements of HWTC_COUNT between - * two tick interrupts. This should preferably be mapped to the reload - * register of the hardware timer, to make it more portable between chips in the - * same family. The macro should in most cases be (reload register + 1). - * - * HWTC_DIVISOR: If the timer frequency is very high, like on the Cortex M chips - * (where the SysTick runs at the core clock frequency), the "differential - * timestamping" used in the recorder will more frequently insert extra XTS - * events to store the timestamps, which increases the event buffer usage. - * In such cases, to reduce the number of XTS events and thereby get longer - * traces, you use HWTC_DIVISOR to scale down the timestamps and frequency. - * Assuming a OS tick rate of 1 KHz, it is suggested to keep the effective timer - * frequency below 65 MHz to avoid an excessive amount of XTS events. Thus, a - * Cortex M chip running at 72 MHZ should use a HWTC_DIVISOR of 2, while a - * faster chip require a higher HWTC_DIVISOR value. - * - * The HWTC macros and uiTracePortGetTimeStamp is the main porting issue - * or the trace recorder library. Typically you should not need to change - * the code of uiTracePortGetTimeStamp if using the HWTC macros. - * - * FREE LICENSE OFFER FROM PERCEPIO - * - * For silicon companies and non-corporate FreeRTOS users (researchers, students, - * hobbyists or early-phase startups) we have the following offer: - * Provide a hardware port for our FreeRTOS recorder and get a FREE single-user - * license for FreeRTOS+Trace Professional Edition. Read more about this offer - * at www.percepio.com or contact us directly at support@percepio.com. - * - ******************************************************************************/ - -#if (SELECTED_PORT == PORT_Win32) - - #define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING - #define HWTC_COUNT (ulGetRunTimeCounterValue()) - #define HWTC_PERIOD 0 - #define HWTC_DIVISOR 1 - - #define IRQ_PRIORITY_ORDER 1 // Please update according to your hardware... - -#elif (SELECTED_PORT == PORT_HWIndependent) - - #define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING - #define HWTC_COUNT 0 - #define HWTC_PERIOD 1 - #define HWTC_DIVISOR 1 - - #define IRQ_PRIORITY_ORDER 1 // Please update according to your hardware... - -#elif (SELECTED_PORT == PORT_Atmel_AT91SAM7) - - /* HWTC_PERIOD is hardcoded for AT91SAM7X256-EK Board (48 MHz) - A more generic solution is to get the period from pxPIT->PITC_PIMR */ - - #define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING - #define HWTC_COUNT (AT91C_BASE_PITC->PITC_PIIR & 0xFFFFF) - #define HWTC_PERIOD 2995 - #define HWTC_DIVISOR 1 - - #define IRQ_PRIORITY_ORDER 1 // higher irq priority values are more significant - -#elif (SELECTED_PORT == PORT_Atmel_UC3A0) - - /* For Atmel AVR32 (AT32UC3A) */ - - #define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING - #define HWTC_COUNT sysreg_read(AVR32_COUNT) - #define HWTC_PERIOD ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ) - #define HWTC_DIVISOR 1 - - #define IRQ_PRIORITY_ORDER 1 // higher irq priority values are more significant - -#elif (SELECTED_PORT == PORT_ARM_CortexM) - - /* For all chips using ARM Cortex M cores */ - - #define HWTC_COUNT_DIRECTION DIRECTION_DECREMENTING - #define HWTC_COUNT (*((uint32_t*)0xE000E018)) - #define HWTC_PERIOD ((*(uint32_t*)0xE000E014) + 1) - #define HWTC_DIVISOR 2 - - #define IRQ_PRIORITY_ORDER 0 // lower irq priority values are more significant - -#elif (SELECTED_PORT == PORT_Renesas_RX600) - - #include "iodefine.h" - - #define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING - #define HWTC_COUNT (CMT0.CMCNT) - #define HWTC_PERIOD ((((configPERIPHERAL_CLOCK_HZ/configTICK_RATE_HZ)-1)/8)) - #define HWTC_DIVISOR 1 - - #define IRQ_PRIORITY_ORDER 1 // higher irq priority values are more significant - -#elif (SELECTED_PORT == PORT_Microchip_dsPIC_AND_PIC24) - - /* For Microchip PIC24 and dsPIC (16 bit) */ - - /* Note: The trace library was originally designed for 32-bit MCUs, and is slower - than intended on 16-bit MCUs. Storing an event on a PIC24 takes about 70 µs. - In comparison, 32-bit MCUs are often 10-20 times faster. If recording overhead - becomes a problem on PIC24, use the filters to exclude less interresting tasks - or system calls. */ - - #define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING - #define HWTC_COUNT (TMR1) - #define HWTC_PERIOD (PR1+1) - #define HWTC_DIVISOR 1 - - #define IRQ_PRIORITY_ORDER 0 // lower irq priority values are more significant - -#elif (SELECTED_PORT == PORT_NXP_LPC210X) - /* UNOFFICIAL PORT - NOT YET VERIFIED BY PERCEPIO */ - - /* Tested with LPC2106, but should work with most LPC21XX chips. - Assumption: prescaler is 1:1 (this setting is hardcoded in - FreeRTOS port for LPC21XX) */ - - #define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING - #define HWTC_COUNT *((uint32_t *)0xE0004008 ) - #define HWTC_PERIOD ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ) - #define HWTC_DIVISOR 1 - - #define IRQ_PRIORITY_ORDER 0 // lower irq priority values are more significant - -#elif (SELECTED_PORT == PORT_TEXAS_INSTRUMENTS_TMS570) - /* UNOFFICIAL PORT - NOT YET VERIFIED BY PERCEPIO */ - - #define RTIFRC0 *((uint32_t *)0xFFFFFC10) - #define RTICOMP0 *((uint32_t *)0xFFFFFC50) - #define RTIUDCP0 *((uint32_t *)0xFFFFFC54) - #define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING - #define HWTC_COUNT (RTIFRC0 - (RTICOMP0 - RTIUDCP0)) - #define HWTC_PERIOD (RTIUDCP0) - #define HWTC_DIVISOR 1 - - #define IRQ_PRIORITY_ORDER 0 // lower irq priority values are more significant - -#elif (SELECTED_PORT == PORT_TEXAS_INSTRUMENTS_MSP430) - /* UNOFFICIAL PORT - NOT YET VERIFIED BY PERCEPIO */ - - #define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING - #define HWTC_COUNT (TA0R) - #define HWTC_PERIOD configCPU_CLOCKS_PER_TICK - #define HWTC_DIVISOR 1 - - #define IRQ_PRIORITY_ORDER 1 // higher irq priority values are more significant - -#elif (SELECTED_PORT == PORT_MICROCHIP_PIC32) - /* UNOFFICIAL PORT - NOT YET VERIFIED BY PERCEPIO */ - - #define HWTC_COUNT_DIRECTION DIRECTION_INCREMENTING - #define HWTC_COUNT (ReadTimer1()) /* Should be available in BSP */ - #define HWTC_PERIOD (ReadPeriod1()+1) /* Should be available in BSP */ - #define HWTC_DIVISOR 1 - - #define IRQ_PRIORITY_ORDER 0 // lower irq priority values are more significant - -#elif (SELECTED_PORT == PORT_XILINX_PPC405) - /* UNOFFICIAL PORT - NOT YET VERIFIED BY PERCEPIO */ - - #define HWTC_COUNT_DIRECTION DIRECTION_DECREMENTING - #define HWTC_COUNT mfspr( 0x3db) - #define HWTC_PERIOD ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ) - #define HWTC_DIVISOR 1 - - #define IRQ_PRIORITY_ORDER 0 // lower irq priority values are more significant - -#elif (SELECTED_PORT == PORT_XILINX_PPC440) - /* UNOFFICIAL PORT - NOT YET VERIFIED BY PERCEPIO */ - - /* This should work with most PowerPC chips */ - - #define HWTC_COUNT_DIRECTION DIRECTION_DECREMENTING - #define HWTC_COUNT mfspr( 0x016 ) - #define HWTC_PERIOD ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ) - #define HWTC_DIVISOR 1 - - #define IRQ_PRIORITY_ORDER 0 // lower irq priority values are more significant - -#elif (SELECTED_PORT == PORT_XILINX_MICROBLAZE) - /* UNOFFICIAL PORT - NOT YET VERIFIED BY PERCEPIO */ - - /* This should work with most Microblaze configurations - * This port is based on the official FreeRTOS Microlaze port and example application. - * It uses the AXI Timer 0 - the tick interrupt source. - * If an AXI Timer 0 peripheral is available on your hardware platform, no modifications are required. - */ - #include "xtmrctr_l.h" - - #define HWTC_COUNT_DIRECTION DIRECTION_DECREMENTING - #define HWTC_COUNT XTmrCtr_GetTimerCounterReg( XPAR_TMRCTR_0_BASEADDR, 0 ) - #define HWTC_PERIOD ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ) - #define HWTC_DIVISOR 16 - - #define IRQ_PRIORITY_ORDER 0 // lower irq priority values are more significant - -#elif (SELECTED_PORT != PORT_NOT_SET) - - #error "SELECTED_PORT had unsupported value!" - #define SELECTED_PORT PORT_NOT_SET - -#endif - -#if (SELECTED_PORT != PORT_NOT_SET) - - #ifndef HWTC_COUNT_DIRECTION - #error "HWTC_COUNT_DIRECTION is not set!" - #endif - - #ifndef HWTC_COUNT - #error "HWTC_COUNT is not set!" - #endif - - #ifndef HWTC_PERIOD - #error "HWTC_PERIOD is not set!" - #endif - - #ifndef HWTC_DIVISOR - #error "HWTC_DIVISOR is not set!" - #endif - - #ifndef IRQ_PRIORITY_ORDER - #error "IRQ_PRIORITY_ORDER is not set!" - #elif (IRQ_PRIORITY_ORDER != 0) && (IRQ_PRIORITY_ORDER != 1) - #error "IRQ_PRIORITY_ORDER has bad value!" - #endif - - #if (HWTC_DIVISOR < 1) - #error "HWTC_DIVISOR must be a non-zero positive value!" - #endif - -#endif -/******************************************************************************* - * vTraceConsoleMessage - * - * A wrapper for your system-specific console "printf" console output function. - * This needs to be correctly defined to see status reports from the trace - * status monitor task (this is defined in trcUser.c). - ******************************************************************************/ -#if (SELECTED_PORT == PORT_Atmel_AT91SAM7) -/* Port specific includes */ -#include "console.h" -#endif - -#define vTraceConsoleMessage(x) - -/******************************************************************************* - * uiTracePortGetTimeStamp - * - * Returns the current time based on the HWTC macros which provide a hardware - * isolation layer towards the hardware timer/counter. - * - * The HWTC macros and uiTracePortGetTimeStamp is the main porting issue - * or the trace recorder library. Typically you should not need to change - * the code of uiTracePortGetTimeStamp if using the HWTC macros. - * - * OFFER FROM PERCEPIO: - * For silicon companies and non-corporate FreeRTOS users (researchers, - * students, hobbyists or early-phase startups) we have an attractive offer: - * Provide a hardware timer port and get a FREE single-user licence for - * FreeRTOS+Trace Professional Edition. Read more about this offer at - * www.percepio.com or contact us directly at support@percepio.com. - ******************************************************************************/ -void uiTracePortGetTimeStamp(uint32_t *puiTimestamp); - -/******************************************************************************* - * vTracePortEnd - * - * This function is called when the recorder is stopped due to full buffer. - * Mainly intended to show a message in the console. - * This is used by the Win32 port to store the trace to a file. The file path is - * set using vTracePortSetFileName. - ******************************************************************************/ -void vTracePortEnd(void); - -#if (INCLUDE_SAVE_TO_FILE == 1) - -/******************************************************************************* - * vTracePortSetOutFile - * - * Sets the filename/path used in vTracePortSave. - * This is set in a separate function, since the Win32 port calls vTracePortSave - * in vTracePortEnd if WIN32_PORT_SAVE_WHEN_STOPPED is set. - ******************************************************************************/ -void vTracePortSetOutFile(char* path); - -/****************************************************************************** - * vTracePortSave - * - * Saves the trace to a file on a target-side file system. The path is set in a - * separate function, vTracePortSetOutFile, since the Win32 port may call - * vTracePortSave in vTracePortEnd, if using WIN32_PORT_SAVE_WHEN_STOPPED. - ******************************************************************************/ -void vTracePortSave(void); - -#endif - -#endif diff --git a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Include/trcTypes.h b/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Include/trcTypes.h deleted file mode 100644 index 7bf438c8b..000000000 --- a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Include/trcTypes.h +++ /dev/null @@ -1,81 +0,0 @@ -/******************************************************************************* - * FreeRTOS+Trace v2.3.0 Recorder Library - * Percepio AB, www.percepio.com - * - * trcTypes.h - * - * Data types used by the trace recorder library. - * - * Terms of Use - * This software is copyright Percepio AB. The recorder library is free for - * use together with Percepio products. You may distribute the recorder library - * in its original form, including modifications in trcPort.c and trcPort.h - * given that these modification are clearly marked as your own modifications - * and documented in the initial comment section of these source files. - * This software is the intellectual property of Percepio AB and may not be - * sold or in other ways commercially redistributed without explicit written - * permission by Percepio AB. - * - * Disclaimer - * The trace tool and recorder library is being delivered to you AS IS and - * Percepio AB makes no warranty as to its use or performance. Percepio AB does - * not and cannot warrant the performance or results you may obtain by using the - * software or documentation. Percepio AB make no warranties, express or - * implied, as to noninfringement of third party rights, merchantability, or - * fitness for any particular purpose. In no event will Percepio AB, its - * technology partners, or distributors be liable to you for any consequential, - * incidental or special damages, including any lost profits or lost savings, - * even if a representative of Percepio AB has been advised of the possibility - * of such damages, or for any claim by any third party. Some jurisdictions do - * not allow the exclusion or limitation of incidental, consequential or special - * damages, or the exclusion of implied warranties or limitations on how long an - * implied warranty may last, so the above limitations may not apply to you. - * - * FreeRTOS+Trace is available as Free Edition and in two premium editions. - * You may use the premium features during 30 days for evaluation. - * Download FreeRTOS+Trace at http://www.percepio.com/products/downloads/ - * - * Copyright Percepio AB, 2012. - * www.percepio.com - ******************************************************************************/ - -#ifndef TRCTYPES_H -#define TRCTYPES_H - -#include - -typedef uint16_t traceLabel; - -typedef uint8_t objectHandleType; - -typedef uint8_t traceObjectClass; - -#define TRACE_CLASS_QUEUE ((traceObjectClass)0) -#define TRACE_CLASS_SEMAPHORE ((traceObjectClass)1) -#define TRACE_CLASS_MUTEX ((traceObjectClass)2) -#define TRACE_CLASS_TASK ((traceObjectClass)3) -#define TRACE_CLASS_ISR ((traceObjectClass)4) - -typedef uint8_t traceKernelService; - -#define TRACE_KERNEL_SERVICE_TASK_CREATE ((traceKernelService)0) -#define TRACE_KERNEL_SERVICE_TASK_DELETE ((traceKernelService)1) -#define TRACE_KERNEL_SERVICE_TASK_DELAY ((traceKernelService)2) -#define TRACE_KERNEL_SERVICE_PRIORITY_SET ((traceKernelService)3) -#define TRACE_KERNEL_SERVICE_TASK_SUSPEND ((traceKernelService)4) -#define TRACE_KERNEL_SERVICE_TASK_RESUME ((traceKernelService)5) -#define TRACE_KERNEL_SERVICE_QUEUE_CREATE ((traceKernelService)6) -#define TRACE_KERNEL_SERVICE_QUEUE_DELETE ((traceKernelService)7) -#define TRACE_KERNEL_SERVICE_QUEUE_SEND ((traceKernelService)8) -#define TRACE_KERNEL_SERVICE_QUEUE_RECEIVE ((traceKernelService)9) -#define TRACE_KERNEL_SERVICE_QUEUE_PEEK ((traceKernelService)10) -#define TRACE_KERNEL_SERVICE_MUTEX_CREATE ((traceKernelService)11) -#define TRACE_KERNEL_SERVICE_MUTEX_DELETE ((traceKernelService)12) -#define TRACE_KERNEL_SERVICE_MUTEX_GIVE ((traceKernelService)13) -#define TRACE_KERNEL_SERVICE_MUTEX_TAKE ((traceKernelService)14) -#define TRACE_KERNEL_SERVICE_SEMAPHORE_CREATE ((traceKernelService)15) -#define TRACE_KERNEL_SERVICE_SEMAPHORE_DELETE ((traceKernelService)16) -#define TRACE_KERNEL_SERVICE_SEMAPHORE_GIVE ((traceKernelService)17) -#define TRACE_KERNEL_SERVICE_SEMAPHORE_TAKE ((traceKernelService)18) - -#endif diff --git a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Include/trcUser.h b/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Include/trcUser.h deleted file mode 100644 index 3e80162fa..000000000 --- a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/Include/trcUser.h +++ /dev/null @@ -1,444 +0,0 @@ -/******************************************************************************* - * FreeRTOS+Trace v2.3.0 Recorder Library - * Percepio AB, www.percepio.com - * - * trcUser.h - * The public API of the trace recorder library. - * - * Terms of Use - * This software is copyright Percepio AB. The recorder library is free for - * use together with Percepio products. You may distribute the recorder library - * in its original form, including modifications in trcPort.c and trcPort.h - * given that these modification are clearly marked as your own modifications - * and documented in the initial comment section of these source files. - * This software is the intellectual property of Percepio AB and may not be - * sold or in other ways commercially redistributed without explicit written - * permission by Percepio AB. - * - * Disclaimer - * The trace tool and recorder library is being delivered to you AS IS and - * Percepio AB makes no warranty as to its use or performance. Percepio AB does - * not and cannot warrant the performance or results you may obtain by using the - * software or documentation. Percepio AB make no warranties, express or - * implied, as to noninfringement of third party rights, merchantability, or - * fitness for any particular purpose. In no event will Percepio AB, its - * technology partners, or distributors be liable to you for any consequential, - * incidental or special damages, including any lost profits or lost savings, - * even if a representative of Percepio AB has been advised of the possibility - * of such damages, or for any claim by any third party. Some jurisdictions do - * not allow the exclusion or limitation of incidental, consequential or special - * damages, or the exclusion of implied warranties or limitations on how long an - * implied warranty may last, so the above limitations may not apply to you. - * - * FreeRTOS+Trace is available as Free Edition and in two premium editions. - * You may use the premium features during 30 days for evaluation. - * Download FreeRTOS+Trace at http://www.percepio.com/products/downloads/ - * - * Copyright Percepio AB, 2012. - * www.percepio.com - ******************************************************************************/ - -#ifndef TRCUSER_H -#define TRCUSER_H - -#include "FreeRTOS.h" - -#include "trcKernel.h" - -#if (configUSE_TRACE_FACILITY == 1) - -#ifdef __cplusplus -extern "C" { -#endif - -/******************************************************************************* - * uiTraceStart - * - * Starts the recorder. The recorder will not be started if an error has been - * indicated using vTraceError, e.g. if any of the Nx constants in trcConfig.h - * has a too small value (NTASK, NQUEUE, etc). - * - * Returns 1 if the recorder was started successfully. - * Returns 0 if the recorder start was prevented due to a previous internal - * error. In that case, check vTraceGetLastError to get the error message. - * Any error message is also presented when opening a trace file in - * FreeRTOS+Trace v2.2.2 or later. - ******************************************************************************/ -uint32_t uiTraceStart(void); - -/******************************************************************************* - * vTraceStart - * - * Starts the recorder. The recorder will not be started if an error has been - * indicated using vTraceError, e.g. if any of the Nx constants in trcConfig.h - * has a too small value (NTASK, NQUEUE, etc). - * - * This function is obsolete, but has been saved for backwards compatibility. - * We recommend using uiTraceStart instead. - ******************************************************************************/ -void vTraceStart(void); - -/******************************************************************************* - * vTraceStartStatusMonitor - * - * This starts a task to monitor the status of the recorder module. - * This task periodically prints a line to the console window, which shows the - * recorder status, the number of events recorded and the latest timestamp. - * This task calls vTracePortEnd (trcPort.c) when it detects that the recorder - * has been stopped. This allows for adding custom actions, e.g., to store the - * trace to a file in case a file system is available on the device. - ******************************************************************************/ -void vTraceStartStatusMonitor(void); - -/******************************************************************************* - * vTraceStop - * - * Stops the recorder. The recording can be resumed by calling vTraceStart. - * This does not reset the recorder. Use vTraceClear is that is desired. - ******************************************************************************/ -void vTraceStop(void); - -/******************************************************************************* - * vTraceClear - * - * Resets the recorder. Only necessary if a restart is desired - this is not - * needed in the startup initialization. - ******************************************************************************/ -void vTraceClear(void); - -/******************************************************************************* - * vTraceSetQueueName - * - * Assigns a name to a FreeRTOS Queue, Semaphore or Mutex. This function should - * be called right after creation of the queue/mutex/semaphore. If not using - * this function, the queues/mutexes/semaphores will be presented by their - * numeric handle only. - * - * Example: - * actuatorQ = xQueueCreate(3, sizeof(QueueMessage)); - * vTraceSetQueueName(actuatorQ, "ActuatorQueue"); - ******************************************************************************/ -void vTraceSetQueueName(void* queue, const char* name); - -#if (INCLUDE_ISR_TRACING == 1) - -/******************************************************************************* - * vTraceSetISRProperties - * - * Registers an Interrupt Service Routine in the recorder library, This must be - * called before using vTraceStoreISRBegin to store ISR events. This is - * typically called in the startup of the system, before the scheduler is - * started. - * - * Example: - * #define ID_ISR_TIMER1 1 // lowest valid ID is 1 - * #define PRIO_OF_ISR_TIMER1 3 // the hardware priority of the interrupt - * ... - * vTraceSetISRProperties(ID_ISR_TIMER1, "ISRTimer1", PRIO_OF_ISR_TIMER1); - * ... - * void ISR_handler() - * { - * portENTER_CRITICAL(); // Required if nested ISRs are allowed - * vTraceStoreISRBegin(ID_OF_ISR_TIMER1); - * portEXIT_CRITICAL(); - * ... - * portENTER_CRITICAL(); // Required if nested ISRs are allowed - * vTraceStoreISREnd(); - * portEXIT_CRITICAL(); - * } - ******************************************************************************/ -void vTraceSetISRProperties(objectHandleType handle, const char* name, char priority); - -/******************************************************************************* - * vTraceStoreISRBegin - * - * Registers the beginning of an Interrupt Service Routine. - * - * Note! This may only be used for interrupts affected by portENTER_CRITICAL. - * In some FreeRTOS ports, such as ARM Cortex M3, this does not disable all - * interrupts. Interrupts above configMAX_SYSCALL_INTERRUPT_PRIORITY are still - * enabled, but may not call the FreeRTOS API. Such may not call the recorder - * API, including this function. - * - * See http://www.freertos.org/a00110.html - * - * If allowing nested ISRs, this must be called with interrupts disabled. - * - * Example: - * #define ID_ISR_TIMER1 1 // lowest valid ID is 1 - * #define PRIO_OF_ISR_TIMER1 3 // the hardware priority of the interrupt - * ... - * vTraceSetISRProperties(ID_ISR_TIMER1, "ISRTimer1", PRIO_OF_ISR_TIMER1); - * ... - * void ISR_handler() - * { - * portENTER_CRITICAL(); // Required if nested ISRs are allowed - * vTraceStoreISRBegin(ID_OF_ISR_TIMER1); - * portEXIT_CRITICAL(); - * ... - * portENTER_CRITICAL(); // Required if nested ISRs are allowed - * vTraceStoreISREnd(); - * portEXIT_CRITICAL(); - * } - ******************************************************************************/ -void vTraceStoreISRBegin(objectHandleType id); - -/******************************************************************************* - * vTraceStoreISREnd - * - * Registers the end of an Interrupt Service Routine. - * - * Note! This may only be used for interrupts affected by portENTER_CRITICAL. - * In some FreeRTOS ports, such as ARM Cortex M3, this does not disable all - * interrupts. Interrupts above configMAX_SYSCALL_INTERRUPT_PRIORITY are still - * enabled, but may not call the FreeRTOS API. Such may not call the recorder - * API, including this function. - * - * See http://www.freertos.org/a00110.html - * - * If allowing nested ISRs, this must be called with interrupts disabled. - * - * Example: - * #define ID_ISR_TIMER1 1 // lowest valid ID is 1 - * #define PRIO_OF_ISR_TIMER1 3 // the hardware priority of the interrupt - * ... - * vTraceSetISRProperties(ID_ISR_TIMER1, "ISRTimer1", PRIO_OF_ISR_TIMER1); - * ... - * void ISR_handler() - * { - * portENTER_CRITICAL(); // Required if nested ISRs are allowed - * vTraceStoreISRBegin(ID_OF_ISR_TIMER1); - * portEXIT_CRITICAL(); - * ... - * portENTER_CRITICAL(); // Required if nested ISRs are allowed - * vTraceStoreISREnd(); - * portEXIT_CRITICAL(); - * } - ******************************************************************************/ -void vTraceStoreISREnd(void); - -#else - /* If not including the ISR recording */ - -void vTraceIncreaseISRActive(void); - -void vTraceDecreaseISRActive(void); - -#define vTraceSetISRProperties(handle, name, priority) -#define vTraceStoreISRBegin(id) vTraceIncreaseISRActive() -#define vTraceStoreISREnd() vTraceDecreaseISRActive() - -#endif - -/******************************************************************************* - * vvTraceTaskSkipDefaultInstanceFinishedEvents - * - * This is useful if there are implicit Instance Finish Events, such as - * vTaskDelayUntil or xQueueReceive, in a task where an explicit Instance Finish - * Event has been defined. This function tells the recorder that only the - * explicitly defined functions (using vTraceTaskInstanceIsFinished) should be - * treated as Instance Finish Events for this task. The implicit Instance Finish - * Events are thus disregarded for this task. - ******************************************************************************/ -void vTraceTaskSkipDefaultInstanceFinishedEvents(void); - -/******************************************************************************* - * vTraceTaskInstanceIsFinished - * - * This defines an explicit Instance Finish Event for the current task. It tells - * the recorder that the current instance of this task is finished at the next - * kernel call of the task, e.g., a taskDelay or a queue receive. This function - * should be called right before the api function call considered to be the end - * of the task instamce, i.e., the Instance Finish Event. - ******************************************************************************/ -void vTraceTaskInstanceIsFinished(void); - -/******************************************************************************* - * vTraceGetTraceBuffer - * - * Returns a pointer to the recorder data structure. Use this together with - * uiTraceGetTraceBufferSize if you wish to implement an own store/upload - * solution, e.g., in case a debugger connection is not available for uploading - * the data. - ******************************************************************************/ -void* vTraceGetTraceBuffer(void); - -/******************************************************************************* - * uiTraceGetTraceBufferSize - * - * Gets the size of the recorder data structure. For use together with - * vTraceGetTraceBuffer if you wish to implement an own store/upload solution, - * e.g., in case a debugger connection is not available for uploading the data. - ******************************************************************************/ -uint32_t uiTraceGetTraceBufferSize(void); - -#if (INCLUDE_USER_EVENTS == 1) - -/******************************************************************************* - * xTraceOpenLabel - * - * Creates user event labels for user event channels or for individual events. - * User events can be used to log application events and data for display in - * the visualization tool. A user event is identified by a label, i.e., a string, - * which is stored in the recorder's symbol table. - * When logging a user event, a numeric handle (reference) to this string is - * used to identify the event. This is obtained by calling - * - * xTraceOpenLabel() - * - * whihc adds the string to the symbol table (if not already present) - * and returns the corresponding handle. - * - * This can be used in two ways: - * - * 1. The handle is looked up every time, when storing the user event. - * - * Example: - * vTraceUserEvent(xTraceOpenLabel("MyUserEvent")); - * - * 2. The label is registered just once, with the handle stored in an - * application variable - much like using a file handle. - * - * Example: - * myEventHandle = xTraceOpenLabel("MyUserEvent"); - * ... - * vTraceUserEvent(myEventHandle); - * - * The second option is faster since no lookup is required on each event, and - * therefore recommended for user events that are frequently - * executed and/or located in time-critical code. The lookup operation is - * however fairly fast due to the design of the symbol table. - ******************************************************************************/ -traceLabel xTraceOpenLabel(const char* label); - - /****************************************************************************** - * vTraceUserEvent - * - * Basic user event (Standard and Professional Edition only) - * - * Generates a User Event with a text label. The label is created/looked up - * in the symbol table using xTraceOpenLabel. - ******************************************************************************/ -void vTraceUserEvent(traceLabel eventLabel); - - /****************************************************************************** - * vTracePrintF - * - * Advanced user events (Professional Edition only) - * - * Generates User Event with formatted text and data, similar to a "printf". - * It is very fast compared to a normal "printf" since this function only - * stores the arguments. The actual formatting is done - * on the host PC when the trace is displayed in the viewer tool. - * - * User Event labels are created using xTraceOpenLabel. - * Example: - * - * traceLabel adc_uechannel = xTraceOpenLabel("ADC User Events"); - * ... - * vTracePrint(adc_uechannel, - * "ADC channel %d: %lf volts", - * ch, (double)adc_reading/(double)scale); - * - * This can be combined into one line, if desired, but this is slower: - * - * vTracePrint(xTraceOpenLabel("ADC User Events"), - * "ADC channel %d: %lf volts", - * ch, (double)adc_reading/(double)scale); - * - * Calling xTraceOpenLabel multiple times will not create duplicate entries, but - * it is of course faster to just do it once, and then keep the handle for later - * use. If you don´t have any data arguments, only a text label/string, it is - * better to use vTraceUserEvent - it is faster. - * - * Format specifiers supported: - * %d - 32 bit signed integer - * %u - 32 bit unsigned integer - * %f - 32 bit float - * %s - string (is copied to the recorder symbol table) - * %hd - 16 bit signed integer - * %hu - 16 bit unsigned integer - * %bd - 8 bit signed integer - * %bu - 8 bit unsigned integer - * %lf - double-precision float (Note! See below...) - * - * Up to 15 data arguments are allowed, with a total size of maximum 32 byte. - * In case this is exceeded, the user event is changed into an error message. - * - * The data is stored in trace buffer, and is packed to allow storing multiple - * smaller data entries in the same 4-byte record, e.g., four 8-bit values. - * A string requires two bytes, as the symbol table is limited to 64K. Storing - * a double (%lf) uses two records, so this is quite costly. Use float (%f) - * unless the higher precision is really necessary. - * - * Note that the double-precision float (%lf) assumes a 64 bit double - * representation. This does not seem to be the case on e.g. PIC24F. - * Before using a %lf argument on a 16-bit MCU, please verify that - * "sizeof(double)" actually gives 8 as expected. If not, use %f instead. - ******************************************************************************/ -void vTracePrintF(traceLabel eventLabel, const char* formatStr, ...); - -#else - -#define vTracePrintF(eventLabel, formatStr, ...); -#define xTraceOpenLabel(label) 0 -#define vTraceUserEvent(eventLabel) - -#endif - -/****************************************************************************** - * vTraceExclude______FromTrace - * - * Excludes a task or object from the trace. - * This can be useful if some irrelevant task is very frequent and is "eating - * up the buffer". This should be called after the task has been created, but - * before starting the FreeRTOS scheduler. - *****************************************************************************/ -void vTraceExcludeQueueFromTrace(void* handle); -void vTraceExcludeSemaphoreFromTrace(void* handle); -void vTraceExcludeMutexFromTrace(void* handle); -void vTraceExcludeTaskFromTrace(void* handle); -void vTraceExcludeKernelServiceFromTrace(traceKernelService kernelService); - -/****************************************************************************** - * vTraceInclude______InTrace - * - * Includes a task, object or kernel service in the trace. This is only - * necessary if the task or object has been previously exluded. - *****************************************************************************/ -void vTraceIncludeQueueInTrace(void* handle); -void vTraceIncludeSemaphoreInTrace(void* handle); -void vTraceIncludeMutexInTrace(void* handle); -void vTraceIncludeTaskInTrace(void* handle); -void vTraceIncludeKernelServiceInTrace(traceKernelService kernelService); - -#ifdef __cplusplus -} -#endif - -#else - -#include "trcPort.h" - -#define vTraceInit() -#define uiTraceStart() (1) -#define vTraceStart() -#define vTraceStop() -#define vTraceClear() -#define vTraceStartStatusMonitor() -#define vTracePortSetOutFile(f) -#define vTraceGetTraceBuffer() ((void*)0) -#define uiTraceGetTraceBufferSize() 0 -#define xTraceOpenLabel(label) 0 -#define vTraceUserEvent(eventLabel) -#define vTracePrintF(eventLabel,formatStr,...) -#define vTraceExcludeTaskFromSchedulingTrace(name) -#define vTraceSetQueueName(queue, name) - -#define vTraceTaskSkipDefaultInstanceFinishedEvents() -#define vTraceSetISRProperties(handle, name, priority) -#define vTraceStoreISRBegin(id) -#define vTraceStoreISREnd() -#endif -#endif - diff --git a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/debugger trace upload.txt b/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/debugger trace upload.txt deleted file mode 100644 index 417a54bb7..000000000 --- a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/debugger trace upload.txt +++ /dev/null @@ -1,126 +0,0 @@ - -FreeRTOS+Trace - Uploading the trace data ------------------------------------------ -Percepio AB, Nov. 8, 2012 - -This document decribes how to upload the trace data from the target system to -FreeRTOS+Trace. For information on how to integrate and enable the recorder -library in your FreeRTOS project, see the FreeRTOS+Trace User Manual. - -FreeRTOS+Trace uses your existing debugger to upload the trace data from the -chip RAM. This is a plain RAM dump, that is done whenever you want to look at -the trace buffer contents. This means it works with essentially with any debug -probe on the market. - -Note that hardware-generated trace is not required (or used by) FreeRTOS+Trace. -We however plan to add support for that in future versions of FreeRTOS+Trace -and other Tracealyzer products. - -Built-in support for Segger J-Link/J-Trace and Atmel SAM-ICE ------------------------------------------------------------- -FreeRTOS+Trace v2.3 supports Segger J-Link and J-Link compatible debuggers -directly, without any debugger IDE involved. Using other debug probes is -also possible, but requires some extra steps, described below. - -If you have a Segger J-Link/J-Trace debug probe or another J-Link compatible -debug probe, just select - - "File" menu -> "Upload from ". - -This opens a dialog where you get to enter the memory region where -the recorder data structure is located. Normally you select the entire -internal RAM according to the datasheet of your MCU, but the exact address -can be found can by inspecting the "RecorderData" struct or the -"RecorderDataPtr" pointer with your debugger. - -Typical values are 0x0, 0x10000000 or 0x20000000 as start address -and 0x10000 or 0x20000 as size (64 KB or 128 KB). - -This makes FreeRTOS+Trace reads the chip RAM and locate the trace data. -Note that this option is only available if a compatible debug probe is found. - -J-Link compatible debug probes also include Atmel SAM-ICE and many built-in -debug interfaces on demonstration/evaluation boards (where there is a USB -connection directly to the board). Look for a Segger J-Link label on the board. - -MemoryLogger extension in Atmel Studio 6 ----------------------------------------- -Atmel's new MemoryLogger extension provides a superb integration with -FreeRTOS+Trace. Look for "MemoryLogger" in Atmel Gallery, available in -Atmel Studio and at the Atmel website. - -This extension automatically detects the path to FreeRTOS+Trace, if -installed, and gives you a single-click upload/refresh. You can use it -while debugging and optionally get an automatic refresh eash time the -MCU is halted, e.g., on each breakpoint. - -Using other development environments and debug probes ------------------------------------------------------ -Most debuggers are able to save the RAM contents to a file. FreeRTOS+Trace -supports the following common formats: -- Binary (.bin), supporting gdb, J-Link and Renesas HEW. -- Intel Hex (.hex), supporting IAR Embedded Workbench and Atmel Studio (atprogram.exe) -- MCH (.mch), supporting Microchip MPLAB. - -When you store the RAM dump, you must also make sure to select the right region, -i.e., start address and size. The recorder data is stored in a single data -block, identified by the pointer RecorderDataPtr. -It is not necessary to match the begin and end of the recorder data, as long as -it is fully included by the dumped memory region. FreeRTOS+Trace automatically -finds the trace data in the RAM dump, thanks to special signatures. For chips -with on-chip RAM only, we therefore recommend to dump the entire RAM. This is -usually very fast. -For chips with larger amounts of (external) RAM, it is typically possible to -dump a limited region where the data is typically found. - -Using IAR Embedded Workbench for ARM, version 6.3 -------------------------------------------------- -In the debugger view, when stopped on a breakpoint: -- Select "Debug" menu, "Memory" submenu, "Save..." (keyboard shortcut: ALT,d,y,s) -- In the Save dialog - - Zone: Memory - - Start Adress: 10000000 (for NXP LPC1766 in the demo project) - - End Adress: 1000FFFF (for NXP LPC1766 in the demo project) - - File format: Intel Extended - - Filename: .hex - - Press "Save" button -You can now open .hex in FreeRTOS+Trace. - -To find the right Start and End addresses, check the address of the symbol -"RecorderData". The addresses does not need to match this symbol exactly, as -long as the whole data is included. - -Using Renesas High-performance Embedded Workshop v4.09 ------------------------------------------------------- -In the debugger view, when stopped on a breakpoint: -- Select "Debug" menu, "Save Memory..." (keyboard shortcut: ALT,d,a) -- In the Save dialog - - Format: Binary - - Filename: .bin - - Start Address: 00000000 (For RX62N in the demo project) - - End Address: 0000FFFF (For RX62N in the demo project) - - Access size: 1 - - Press "Save" button and open .bin in FreeRTOS+Trace. - -Using Microchip MPLAB v8.86 ------------------------------------------------------- -- Select "View" -> "File Registers". This shows you the memory contents. -- Make sure "Hex" is selected in the bottom left (instead of "Symbolic"). Hex mode seems to be default. -- Right click in the view and select "Export Table...". -- In the dialog ("Export As"), make sure "Single Column Output" is selected (seems to be default). -- Select start address 0x0000 and make sure the end address is beyond the RecorderData structure. - The default values seems to be the whole RAM, so you probably don't need to change this. -- Save as a .mch file and open this file in FreeRTOS+Trace v2.2.4 or later (support for the .mch format was added in v2.2.4). - -Using STM32 ST-Link ------------------------------------------------------- -- Start "ST-Link Utility" -- Connect to the device and view the device memory. -- Set the view to display the entire RAM, or at least the section containing the RecorderData structure. -- Select "Save as" and choose binary (.bin) or Intel Hex (.hex) format. -- Open the resulting file in FreeRTOS+Trace. - -In case you have any question, contact support@percepio.com - -Percepio AB -www.percepio.com diff --git a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/readme.txt b/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/readme.txt deleted file mode 100644 index 0553c8bd1..000000000 --- a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/readme.txt +++ /dev/null @@ -1,53 +0,0 @@ - -FreeRTOS+Trace Trace Recorder Library -------------------------------------- -Percepio AB -www.percepio.com - -This directory contains the core trace recorder library used by FreeRTOS+Trace v2.3. - -Ready-to-run demonstrations projects are found at www.percepio.com. - -For information on how to integrate the recorder library in your FreeRTOS build, see -the FreeRTOS+Trace User Manual, section 2. - -For information on how to upload the trace data from your target system RAM to -FreeRTOS+Trace, see "debugger trace upload.txt" - -NOTE: This trace recorder library requires FreeRTOS v7.3.0 or later. - -Files included --------------- -- trcConfig.h - The recorder's configuration file, check this! -- trcUser.c / trcUser.h - The main API towards the application (trcUser.h in the only include necessary). -- trcKernel.c / trcKernel.h - Internal routines for storing kernel events. -- trcBase.c / trcBase.h - Internal routines for manipulating the data structures and calculating timestamps. -- trcPort.c / trcPort.h - The port layer, abstracting the hardware (mainly the timer used for timestamping). -- trcHooks.h - The interface between FreeRTOS and the recorder, containing trace macro defintions. -- trcTypes.h - Type definitions used. - -Hardware Timer Ports --------------------- -This release contains hardware timer ports for the following hardware architectures: - -- ARM Cortex M3/M4 (all brands, such as Atmel SAM3/SAM4, NXP 17xx, 18xx, 43xx, STM32, Freescale Kinetis, ...) -- Atmel AT91SAM7x -- Atmel AT32UC3 (AVR32) -- Renesas RX600 (e.g., RX62N) -- Microchip dsPIC/PIC24 - -These are defined in trcPort.h. This also contains several "unofficial" ports, provided by external contributors. -By unofficial, it means that they are not yet verified by Percepio AB. Please refer to trcPort.h for detailed information. -If you use an unofficial port and beleive it is incorrect, please let us know! - -In case your MCU is not yet supported directly, developing a new port is quite easy, just a matter of defining a few macros -according to your specific MCU. See trcPort.h for further information. - -In case you have any questions, do not hesitate to contact support@percepio.com - -Percepio AB -Köpmangatan 1A -72215 Västerås -Sweden - -www.percepio.com \ No newline at end of file diff --git a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/trcBase.c b/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/trcBase.c deleted file mode 100644 index c80915cc9..000000000 --- a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/trcBase.c +++ /dev/null @@ -1,992 +0,0 @@ -/******************************************************************************* - * FreeRTOS+Trace v2.3.0 Recorder Library - * Percepio AB, www.percepio.com - * - * trcBase.c - * - * Core functionality of the trace recorder library. - * - * Terms of Use - * This software is copyright Percepio AB. The recorder library is free for - * use together with Percepio products. You may distribute the recorder library - * in its original form, including modifications in trcPort.c and trcPort.h - * given that these modification are clearly marked as your own modifications - * and documented in the initial comment section of these source files. - * This software is the intellectual property of Percepio AB and may not be - * sold or in other ways commercially redistributed without explicit written - * permission by Percepio AB. - * - * Disclaimer - * The trace tool and recorder library is being delivered to you AS IS and - * Percepio AB makes no warranty as to its use or performance. Percepio AB does - * not and cannot warrant the performance or results you may obtain by using the - * software or documentation. Percepio AB make no warranties, express or - * implied, as to noninfringement of third party rights, merchantability, or - * fitness for any particular purpose. In no event will Percepio AB, its - * technology partners, or distributors be liable to you for any consequential, - * incidental or special damages, including any lost profits or lost savings, - * even if a representative of Percepio AB has been advised of the possibility - * of such damages, or for any claim by any third party. Some jurisdictions do - * not allow the exclusion or limitation of incidental, consequential or special - * damages, or the exclusion of implied warranties or limitations on how long an - * implied warranty may last, so the above limitations may not apply to you. - * - * FreeRTOS+Trace is available as Free Edition and in two premium editions. - * You may use the premium features during 30 days for evaluation. - * Download FreeRTOS+Trace at http://www.percepio.com/products/downloads/ - * - * Copyright Percepio AB, 2012. - * www.percepio.com - ******************************************************************************/ - -#include "trcUser.h" -#include "task.h" - -#if (configUSE_TRACE_FACILITY == 1) - -/******************************************************************************* - * Static data initializations - ******************************************************************************/ - - -/******************************************************************************* - * RecorderData - * - * The main data structure. This is the data read by FreeRTOS+Trace, typically - * through a debugger RAM dump. The recorder access this through the pointer - * RecorderDataPtr, to allow for dynamic memory allocation as well. - * - * On the NXP LPC17xx you may use the secondary RAM bank (AHB RAM) for this - * purpose. For instance, the LPC1766 has 32 KB AHB RAM which allows for - * allocating a buffer size of at least 7500 events without affecting the main - * RAM. To place RecorderData in this RAM bank, use the below declaration. - * - * #pragma location="AHB_RAM_MEMORY" - * RecorderDataType RecorderData = ... - * - * This of course works for other hardware architectures with additional RAM - * banks as well, just replace "AHB_RAM_MEMORY" with the name of the right - * address section from the linker file. - * - * However, to keep trcBase.c portable and still have a preconfigured IAR demo - * using AHB RAM, we don't add the pragma directly in trcBase.c but in a header - * included where the pragma should go. This is used depending on the setting - * USE_LINKER_PRAGMA, defined in trcConfig.h. - * - * If using GCC, this is instead done by adding a "section" attribute: - * - * RecorderDataType RecorderData __attribute__ ((section ("name"))) = ... - * - * Remember to replace "name" with the correct section name. - ******************************************************************************/ - -#if (TRACE_DATA_ALLOCATION == TRACE_DATA_ALLOCATION_STATIC) -#if (USE_LINKER_PRAGMA == 1) -#include "recorderdata_linker_pragma.h" -#endif -RecorderDataType RecorderData = -{ - /* start marker, 12 chars */ - 0x01, 0x02, 0x03, 0x04, - 0x71, 0x72, 0x73, 0x74, - 0xF1, 0xF2, 0xF3, 0xF4, - - /* version code - also used to determine endianness */ - VERSION, - - /* minor file format version */ - MINOR_VERSION, - - /* irq priority order */ - IRQ_PRIORITY_ORDER, - - /* file size (for control) */ - sizeof(RecorderDataType), - - /* number of events stored so far */ - 0, - - /* size of events buffer (in event records, each 4 bytes) */ - EVENT_BUFFER_SIZE, - - /* next free event index (event index, not byte address) */ - 0, - - /* buffer is full */ - 0, - - /* frequency of clock user for timestamps, in Hz - should be 0 here - as this is used to indicate "not yet initialized" - this is instead - initialized on the first taskswitch event. */ - 0, - - /* the absolute timestamp of the last stored event, modulo frequency */ - 0, - - /* the number of seconds so far */ - 0, - - /* is recorder active (yes = 1) - note that "close" events are always - stored to keep the name-handle mapping updated!*/ - 0, - - /* Generated by FreeRTOS+Trace in Team Admin mode. Otherwise this should be "". */ - TEAM_LICENSE_CODE, - - /* debug marker 0 */ - 0xF0F0F0F0, - - /* The Object Property Table - holds info of all active objects */ - { - /* Number of object classes, also those not used */ - NCLASSES, - - /* The size in bytes of the object table byte pool */ - DynObjTableSize, - - /* The number of slots/handles available for each class */ - { - NQueue, - NSemaphore, - NMutex, - NTask, - NISR - }, - - /* The maximum name length for each object class */ - { - NameLenQueue, - NameLenSemaphore, - NameLenMutex, - NameLenTask, - NameLenISR - }, - - /* The total length a property table entry of the class */ - { - PropertyTableSizeQueue, - PropertyTableSizeSemaphore, - PropertyTableSizeMutex, - PropertyTableSizeTask, - PropertyTableSizeISR - }, - - /* The start index of each class in the object property table */ - { - StartIndexQueue, - StartIndexSemaphore, - StartIndexMutex, - StartIndexTask, - StartIndexISR - }, - - /* the object property table - encoded in a byte array using above - definitions */ - {0} - }, - - /* debug marker 1 */ - 0xF1F1F1F1, - - /* The Symbol Table - holds all object names used since system - startup. Every string is unique, so objects with same name will share - an entry. Each name entry has four extra bytes: byte 0-1 is a link - reference in an internal linked list, used for fast lookups, byte 2-3 - holds a reference to a channel label used for vTracePrintF format - strings, and byte 4.. holds the object name, followed by a - zero-termination.*/ - { - SYMBOL_TABLE_SIZE, - - /* next free index (0 is reserved to mean NULL) */ - 1, - - /* the symbol table byte pool */ - {0}, - - /* this is a 64 entry array holding 16-bit references (indexes) - to the most recent entry of each checksum - i.e., list heads.*/ - {0}, - - }, - -#if (INCLUDE_FLOAT_SUPPORT == 1) - /* example float, for float endian detection */ - (float)1.0, -#else - /* This code signals that no float support is included */ - (uint32_t)0, -#endif - - /* internalErrorOccured */ - 0, - - /* debug marker 2 */ - 0xF2F2F2F2, - - /* The trace description string, can hold any information about the system, - e.g., version, configuration. Error messages from the recorder are - copied to this buffer. Also used for internal error messages.*/ - TRACE_DESCRIPTION, - - /* debug marker 3 */ - 0xF3F3F3F3, - - /* the event data buffer, size EVENT_BUFFER_SIZE*4 */ - {0}, - - /* end markers, used to extract the trace from a RAM dump image */ - 0x0A, 0x0B, 0x0C, 0x0D, - 0x71, 0x72, 0x73, 0x74, - 0xF1, 0xF2, 0xF3, 0xF4 -}; - -RecorderDataType* RecorderDataPtr = &RecorderData; - -/* This version of the function does nothing as the trace data is statically allocated */ -RecorderDataType* xTraceInitTraceData(void) -{ - return 0; -} - -#elif (TRACE_DATA_ALLOCATION == TRACE_DATA_ALLOCATION_DYNAMIC) - -RecorderDataType* RecorderDataPtr = NULL; - -/* This version of the function dynamically allocates the trace data */ -RecorderDataType* xTraceInitTraceData(void) -{ - RecorderDataType* tmp = (RecorderDataType*)pvPortMalloc(sizeof(RecorderDataType)); - - if (! tmp) - { - vTraceError("Malloc failed in xTraceInitTraceData! Reduce size constants in trcConfig.h"); - return NULL; - } - - (void)memset(tmp, 0, sizeof(RecorderDataType)); - - tmp->startmarker0 = 0x01; - tmp->startmarker1 = 0x02; - tmp->startmarker2 = 0x03; - tmp->startmarker3 = 0x04; - tmp->startmarker4 = 0x71; - tmp->startmarker5 = 0x72; - tmp->startmarker6 = 0x73; - tmp->startmarker7 = 0x74; - tmp->startmarker8 = 0xF1; - tmp->startmarker9 = 0xF2; - tmp->startmarker10 = 0xF3; - tmp->startmarker11 = 0xF4; - tmp->version = VERSION; - tmp->minor_version = MINOR_VERSION; - tmp->irq_priority_order = IRQ_PRIORITY_ORDER; - tmp->filesize = sizeof(RecorderDataType); - - tmp->maxEvents = EVENT_BUFFER_SIZE; - - tmp->debugMarker0 = 0xF0F0F0F0; - tmp->ObjectPropertyTable.NumberOfObjectClasses = NCLASSES; - tmp->ObjectPropertyTable.ObjectPropertyTableSizeInBytes = DynObjTableSize; - tmp->ObjectPropertyTable.NumberOfObjectsPerClass[0] = NQueue; - tmp->ObjectPropertyTable.NumberOfObjectsPerClass[1] = NSemaphore; - tmp->ObjectPropertyTable.NumberOfObjectsPerClass[2] = NMutex; - tmp->ObjectPropertyTable.NumberOfObjectsPerClass[3] = NTask; - tmp->ObjectPropertyTable.NumberOfObjectsPerClass[4] = NISR; - tmp->ObjectPropertyTable.NameLengthPerClass[0] = NameLenQueue; - tmp->ObjectPropertyTable.NameLengthPerClass[1] = NameLenSemaphore; - tmp->ObjectPropertyTable.NameLengthPerClass[2] = NameLenMutex; - tmp->ObjectPropertyTable.NameLengthPerClass[3] = NameLenTask; - tmp->ObjectPropertyTable.NameLengthPerClass[4] = NameLenISR; - tmp->ObjectPropertyTable.TotalPropertyBytesPerClass[0] = PropertyTableSizeQueue; - tmp->ObjectPropertyTable.TotalPropertyBytesPerClass[1] = PropertyTableSizeSemaphore; - tmp->ObjectPropertyTable.TotalPropertyBytesPerClass[2] = PropertyTableSizeMutex; - tmp->ObjectPropertyTable.TotalPropertyBytesPerClass[3] = PropertyTableSizeTask; - tmp->ObjectPropertyTable.TotalPropertyBytesPerClass[4] = PropertyTableSizeISR; - tmp->ObjectPropertyTable.StartIndexOfClass[0] = StartIndexQueue; - tmp->ObjectPropertyTable.StartIndexOfClass[1] = StartIndexSemaphore; - tmp->ObjectPropertyTable.StartIndexOfClass[2] = StartIndexMutex; - tmp->ObjectPropertyTable.StartIndexOfClass[3] = StartIndexTask; - tmp->ObjectPropertyTable.StartIndexOfClass[4] = StartIndexISR; - tmp->debugMarker1 = 0xF1F1F1F1; - tmp->SymbolTable.symTableSize = SYMBOL_TABLE_SIZE; - tmp->SymbolTable.nextFreeSymbolIndex = 1; -#if (INCLUDE_FLOAT_SUPPORT == 1) - tmp->exampleFloatEncoding = (float)1.0; /* otherwize already zero */ -#endif - tmp->debugMarker2 = 0xF2F2F2F2; - (void)strncpy(tmp->systemInfo, TRACE_DESCRIPTION, TRACE_DESCRIPTION_MAX_LENGTH); - tmp->debugMarker3 = 0xF3F3F3F3; - tmp->endmarker0 = 0x0A; - tmp->endmarker1 = 0x0B; - tmp->endmarker2 = 0x0C; - tmp->endmarker3 = 0x0D; - tmp->endmarker4 = 0x71; - tmp->endmarker5 = 0x72; - tmp->endmarker6 = 0x73; - tmp->endmarker7 = 0x74; - tmp->endmarker8 = 0xF1; - tmp->endmarker9 = 0xF2; - tmp->endmarker10 = 0xF3; - tmp->endmarker11 = 0xF4; - - RecorderDataPtr = tmp; - - return (RecorderDataType*)RecorderDataPtr; -} - -#endif - -volatile int recorder_busy = 0; - -char sprintfBuffer[150]; - -/* For debug printouts - the names of the object classes */ -char OBJECTCLASSNAME[NCLASSES][10] = -{ - "QUEUE", - "SEMAPHORE", - "MUTEX", - "TASK", - "ISR" -}; - -/* Initialization of the handle mechanism, see e.g, xTraceGetObjectHandle */ -objectHandleStackType objectHandleStacks = -{ - /* indexOfNextAvailableHandle */ - { - 0, - NQueue, - NQueue + NSemaphore, - NQueue + NSemaphore + NMutex, - NQueue + NSemaphore + NMutex + NTask - }, - - /* lowestIndexOfClass */ - { - 0, - NQueue, - NQueue + NSemaphore, - NQueue + NSemaphore + NMutex, - NQueue + NSemaphore + NMutex + NTask - }, - - /* highestIndexOfClass */ - { - NQueue - 1, - NQueue + NSemaphore - 1, - NQueue + NSemaphore + NMutex - 1, - NQueue + NSemaphore + NMutex + NTask - 1, - NQueue + NSemaphore + NMutex + NTask + NISR - 1 - }, - {0}, - {0} -}; - - -/* Used for internal state flags of objects */ -uint8_t excludedFlags[(NEventCodes+NQueue+NSemaphore+NMutex+NTask) / 8 + 1]; -uint8_t ifeFlags[NTask / 8 + 1]; - -/* Gives the last error message of the recorder. NULL if no error message. */ -char* traceErrorMessage = NULL; - -void* xTraceNextFreeEventBufferSlot(void) -{ - if (RecorderDataPtr->nextFreeIndex >= EVENT_BUFFER_SIZE) - { - vTraceError("Attempt to index outside event buffer!"); - return NULL; - } - return (void*)(&RecorderDataPtr-> - eventData[RecorderDataPtr->nextFreeIndex*4]); -} - -uint16_t uiIndexOfObject(objectHandleType objecthandle, uint8_t objectclass) -{ - if ((objectclass < NCLASSES) && (objecthandle > 0) && (objecthandle <= - RecorderDataPtr->ObjectPropertyTable.NumberOfObjectsPerClass[objectclass])) - { - return (uint16_t)(RecorderDataPtr-> - ObjectPropertyTable.StartIndexOfClass[objectclass] + - (RecorderDataPtr-> - ObjectPropertyTable.TotalPropertyBytesPerClass[objectclass] * - (objecthandle-1))); - } - - vTraceError("Object table lookup with invalid object handle or object class!"); - return 0; -} - -/******************************************************************************* - * Object handle system - * This provides a mechanism to assign each kernel object (tasks, queues, etc) - * with a 1-byte handle, that is used to identify the object in the trace. - * This way, only one byte instead of four is necessary to identify the object. - * This allows for maximum 255 objects, of each object class, active at any - * moment. - * Note that zero is reserved as an error code and is not a valid handle. - * - * In order to allow for fast dynamic allocation and release of object handles, - * the handles of each object class (e.g., TASK) are stored in a stack. When a - * handle is needed, e.g., on task creation, the next free handle is popped from - * the stack. When an object (e.g., task) is deleted, its handle is pushed back - * on the stack and can thereby be reused for other objects. - * - * Since this allows for reuse of object handles, a specific handle (e.g, "8") - * may refer to TASK_X at one point, and later mean "TASK_Y". To resolve this, - * the recorder uses "Close events", which are stored in the main event buffer - * when objects are deleted and their handles are released. The close event - * contains the mapping between object handle and object name which was valid up - * to this point in time. The object name is stored as a symbol table entry. - ******************************************************************************/ - -objectHandleType xTraceGetObjectHandle(traceObjectClass objectclass) -{ - static objectHandleType handle; - static int indexOfHandle; - - indexOfHandle = objectHandleStacks.indexOfNextAvailableHandle[objectclass]; - if (objectHandleStacks.objectHandles[indexOfHandle] == 0) - { - /* Zero is used to indicate a never before used handle, i.e., - new slots in the handle stack. The handle slot needs to - be initialized here (starts at 1). */ - objectHandleStacks.objectHandles[indexOfHandle] = - (objectHandleType)(1 + indexOfHandle - - objectHandleStacks.lowestIndexOfClass[objectclass]); - } - - handle = objectHandleStacks.objectHandles[indexOfHandle]; - - if ( objectHandleStacks.indexOfNextAvailableHandle[objectclass] - > objectHandleStacks.highestIndexOfClass[objectclass] ) - { - /* ERROR */ - switch(objectclass) - { - case TRACE_CLASS_TASK: - vTraceError("Not enough TASK handles - increase NTask in trcConfig.h"); - break; - case TRACE_CLASS_ISR: - vTraceError("Not enough ISR handles - increase NISR in trcConfig.h"); - break; - case TRACE_CLASS_SEMAPHORE: - vTraceError("Not enough SEMAPHORE handles - increase NSemaphore in trcConfig.h"); - break; - case TRACE_CLASS_MUTEX: - vTraceError("Not enough MUTEX handles - increase NMutex in trcConfig.h"); - break; - case TRACE_CLASS_QUEUE: - vTraceError("Not enough QUEUE handles - increase NQueue in trcConfig.h"); - break; - default: - vTraceError("Invalid object class."); - break; - } - - handle = 0; /* an invalid/anonymous handle - but the recorder is stopped now... */ - } - else - { - int hndCount; - objectHandleStacks.indexOfNextAvailableHandle[objectclass]++; - - hndCount = objectHandleStacks.indexOfNextAvailableHandle[objectclass] - - objectHandleStacks.lowestIndexOfClass[objectclass]; - - if (hndCount > - objectHandleStacks.handleCountWaterMarksOfClass[objectclass]) - { - objectHandleStacks.handleCountWaterMarksOfClass[objectclass] = - (objectHandleType)hndCount; - } - } - - return handle; -} - -void vTraceFreeObjectHandle(traceObjectClass objectclass, objectHandleType handle) -{ - int indexOfHandle; - - /* Check that there is room to push the handle on the stack */ - if ( (objectHandleStacks.indexOfNextAvailableHandle[objectclass] - 1) < - objectHandleStacks.lowestIndexOfClass[objectclass] ) - { - /* Error */ - vTraceError("Attempt to free more handles than allocated! (duplicate xTaskDelete or xQueueDelete?)"); - } - else - { - objectHandleStacks.indexOfNextAvailableHandle[objectclass]--; - indexOfHandle = objectHandleStacks.indexOfNextAvailableHandle[objectclass]; - objectHandleStacks.objectHandles[indexOfHandle] = handle; - } - -} - -/******************************************************************************* - * Objects Property Table - * - * This holds the names and properties of the currently active objects, such as - * tasks and queues. This is developed to support "dynamic" objects which might - * be deleted during runtime. Their handles are only valid during their - * lifetime, i.e., from create to delete, as they might be reused on later - * create operations. When an object is deleted from the OPT, its data is moved - * to the trace buffer and/or the symbol table. - * When an object (task, queue, etc.) is created, it receives a handle, which - * together with the object class specifies its location in the OPT. Thus, - * objects of different types may share the same name and/or handle, but still - * be independent objects. - ******************************************************************************/ - -/******************************************************************************* - * vTraceSetObjectName - * - * Registers the names of queues, semaphores and other kernel objects in the - * recorder's Object Property Table, at the given handle and object class. - ******************************************************************************/ -void vTraceSetObjectName(traceObjectClass objectclass, - objectHandleType handle, - const char* name) -{ - static uint16_t idx; - - if (handle == 0) - { - vTraceError("Illegal handle (0) in vTraceSetObjectName."); - return; - } - - switch(objectclass) - { - case TRACE_CLASS_TASK: - case TRACE_CLASS_ISR: - case TRACE_CLASS_SEMAPHORE: - case TRACE_CLASS_MUTEX: - case TRACE_CLASS_QUEUE: - break; - default: - vTraceError("Illegal object class in vTraceSetObjectName"); - break; - } - - if (handle > - RecorderDataPtr->ObjectPropertyTable.NumberOfObjectsPerClass[objectclass]) - { - switch(objectclass) - { - case TRACE_CLASS_TASK: - vTraceError("Not enough TASK handles - increase NTask in trcConfig.h"); - break; - case TRACE_CLASS_ISR: - vTraceError("Not enough ISR handles - increase NISR in trcConfig.h"); - break; - case TRACE_CLASS_SEMAPHORE: - vTraceError("Not enough SEMAPHORE handles - increase NSemaphore in trcConfig.h"); - break; - case TRACE_CLASS_MUTEX: - vTraceError("Not enough MUTEX handles - increase NMutex in trcConfig.h"); - break; - case TRACE_CLASS_QUEUE: - vTraceError("Not enough QUEUE handles - increase NQueue in trcConfig.h"); - break; - } - } - else - { - idx = uiIndexOfObject(handle, objectclass); - - if (traceErrorMessage == NULL) - { - (void)strncpy((char*)&(RecorderDataPtr->ObjectPropertyTable.objbytes[idx]), - name, - RecorderDataPtr->ObjectPropertyTable.NameLengthPerClass[ objectclass ] ); -#ifdef WIN32 - printf("vTraceSetObjectName(%d, %d, %s)\n", objectclass, handle, name); -#endif - } - } -} - -traceLabel prvTraceOpenSymbol(const char* name, traceLabel userEventChannel) -{ - static uint16_t result; - static uint8_t len; - static uint8_t crc; - len = 0; - crc = 0; - prvTraceGetChecksum(name, &crc, &len); - - trcCRITICAL_SECTION_BEGIN(); - result = prvTraceLookupSymbolTableEntry(name, crc, len, userEventChannel); - if (!result) - { - result = prvTraceCreateSymbolTableEntry(name, crc, len, userEventChannel); - } - trcCRITICAL_SECTION_END(); - - return result; -} - -/******************************************************************************* - * Supporting functions - ******************************************************************************/ - -/******************************************************************************* - * vTraceError - * - * Called by various parts in the recorder. Stops the recorder and stores a - * pointer to an error message, which is printed by the monitor task. - * If you are not using the monitor task, you may use xTraceGetLastError() - * from your application to check if the recorder is OK. - * - * Note: If a recorder error is registered before vTraceStart is called, the - * trace start will be aborted. This can occur if any of the Nxxxx constants - * (e.g., NTask) in trcConfig.h is too small. - ******************************************************************************/ -void vTraceError(const char* msg) -{ - vTraceStop(); - if (traceErrorMessage == NULL) - { - traceErrorMessage = (char*)msg; - (void)strncpy(RecorderDataPtr->systemInfo, - traceErrorMessage, - TRACE_DESCRIPTION_MAX_LENGTH); - RecorderDataPtr->internalErrorOccured = 1; - } -} - -/****************************************************************************** - * prvCheckDataToBeOverwrittenForMultiEntryUserEvents - * - * This checks if the next event to be overwritten is a multi-entry user event, - * i.e., a USER_EVENT followed by data entries. - * Such data entries do not have an event code at byte 0, as other events. - * All 4 bytes are user data, so the first byte of such data events must - * not be interpreted as type field. The number of data entries following - * a USER_EVENT is given in the event code of the USER_EVENT. - * Therefore, when overwriting a USER_EVENT (when using in ringbuffer mode) - * any data entries following must be replaced with NULL events (code 0). - * - * This is assumed to execute within a critical section... - *****************************************************************************/ - -void prvCheckDataToBeOverwrittenForMultiEntryUserEvents( - uint8_t nofEntriesToCheck) -{ - /* Generic "int" type is desired - should be 16 bit variable on 16 bit HW */ - unsigned int i = 0; - unsigned int e = 0; - while (i < nofEntriesToCheck) - { - e = RecorderDataPtr->nextFreeIndex + i; - if ((RecorderDataPtr->eventData[e*4] > USER_EVENT) && - (RecorderDataPtr->eventData[e*4] < USER_EVENT + 16)) - { - uint8_t nDataEvents = (uint8_t)(RecorderDataPtr->eventData[e*4] - USER_EVENT); - if ((e + nDataEvents) < RecorderDataPtr->maxEvents) - { - (void)memset(& RecorderDataPtr->eventData[e*4], 0, 4 + 4 * nDataEvents); - } - } - i++; - } -} - -/******************************************************************************* - * prvTraceUpdateCounters - * - * Updates the index of the event buffer. - ******************************************************************************/ -void prvTraceUpdateCounters(void) -{ - if (RecorderDataPtr->recorderActive == 0) - { - return; - } - - RecorderDataPtr->numEvents++; - - RecorderDataPtr->nextFreeIndex++; - - if (RecorderDataPtr->nextFreeIndex >= EVENT_BUFFER_SIZE) - { -#if (RECORDER_STORE_MODE == STORE_MODE_RING_BUFFER) - RecorderDataPtr->bufferIsFull = 1; - RecorderDataPtr->nextFreeIndex = 0; -#else - vTraceStop(); -#endif - } - -#if (RECORDER_STORE_MODE == STORE_MODE_RING_BUFFER) - prvCheckDataToBeOverwrittenForMultiEntryUserEvents(1); -#endif - -#ifdef STOP_AFTER_N_EVENTS -#if (STOP_AFTER_N_EVENTS > -1) - if (RecorderDataPtr->numEvents >= STOP_AFTER_N_EVENTS) - { - vTraceStop(); - } -#endif -#endif -} - -/****************************************************************************** - * prvTraceGetDTS - * - * Returns a differential timestamp (DTS), i.e., the time since - * last event, and creates an XTS event if the DTS does not fit in the - * number of bits given. The XTS event holds the MSB bytes of the DTS. - * - * The parameter param_maxDTS should be 0xFF for 8-bit dts or 0xFFFF for - * events with 16-bit dts fields. - *****************************************************************************/ -uint16_t prvTraceGetDTS(uint16_t param_maxDTS) -{ - static uint32_t old_timestamp = 0; - XTSEvent* xts = 0; - uint32_t dts = 0; - uint32_t timestamp = 0; - - if (RecorderDataPtr->frequency == 0) - { - /* If HWTC_PERIOD is mapped to the timer reload register, - such as in the Cortex M port, it is not initialized before - FreeRTOS has been started. We therefore store the frequency - of the timer at the first timestamped event after the - scheduler has started. (Note that this function is called - also by vTraceStart and uiTraceStart, which might be - called before the scheduler has been started.) */ - -#if (SELECTED_PORT == PORT_Win32) - RecorderDataPtr->frequency = 100000; -#elif (SELECTED_PORT == PORT_HWIndependent) - RecorderDataPtr->frequency = configTICK_RATE_HZ; -#else - if (xTaskGetSchedulerState() != 0) /* Has the scheduler started? */ - { - RecorderDataPtr->frequency = - (uint32_t)HWTC_PERIOD * (uint32_t)configTICK_RATE_HZ / (uint32_t)HWTC_DIVISOR; - } -#endif - } - - /************************************************************************** - * The below statements read the timestamp from the timer port module. - * If necessary, whole seconds are extracted using division while the rest - * comes from the modulo operation. - **************************************************************************/ - - uiTracePortGetTimeStamp(×tamp); - - /*************************************************************************** - * This condition is only for the Win32 port, since it does not use the tick - * count but instead only HWTC_COUNT (from the performance counter). - * Without this condition, you sometimes get a negative dts value (converted - * into a very large unsiged value) when the performance counter wraps - * around. In other "normal" ports also using the FreeRTOS tick counter, this - * condition can not occur and therefore has no impact. - ***************************************************************************/ - if (timestamp < old_timestamp) - { - timestamp += RecorderDataPtr->frequency; - } - - - dts = timestamp - old_timestamp; - old_timestamp = timestamp; - - if (RecorderDataPtr->frequency > 0) - { - /* Check if dts > 1 second */ - if (dts > RecorderDataPtr->frequency) - { - /* More than 1 second has passed */ - RecorderDataPtr->absTimeLastEventSecond += dts / RecorderDataPtr->frequency; - /* The part that is not an entire second is added to absTimeLastEvent */ - RecorderDataPtr->absTimeLastEvent += dts % RecorderDataPtr->frequency; - } - else - RecorderDataPtr->absTimeLastEvent += dts; - - /* Check if absTimeLastEvent >= 1 second */ - if (RecorderDataPtr->absTimeLastEvent >= RecorderDataPtr->frequency) - { - /* RecorderDataPtr->absTimeLastEvent is more than or equal to 1 second, but always less than 2 seconds */ - RecorderDataPtr->absTimeLastEventSecond++; - RecorderDataPtr->absTimeLastEvent -= RecorderDataPtr->frequency; - /* RecorderDataPtr->absTimeLastEvent is now less than 1 second */ - } - } - else - { - /* Special case if the recorder has not yet started (frequency may be uninitialized, i.e., zero) */ - RecorderDataPtr->absTimeLastEvent = timestamp; - } - - /* If the dts (time since last event) does not fit in event->dts (only 8 or 16 bits) */ - if (dts > param_maxDTS) - { - /* Create an XTS event (eXtended TimeStamp) containing the higher dts bits*/ - xts = (XTSEvent*) xTraceNextFreeEventBufferSlot(); - - if (xts != NULL) - { - if (param_maxDTS == 0xFFFF) - { - xts->type = XTS16; - xts->xts_16 = (uint16_t)((dts / 0x10000) & 0xFFFF); - xts->xts_8 = 0; - } - else if (param_maxDTS == 0xFF) - { - xts->type = XTS8; - xts->xts_16 = (uint16_t)((dts / 0x100) & 0xFFFF); - xts->xts_8 = (uint8_t)((dts / 0x1000000) & 0xFF); - } - else - { - vTraceError("Bad param_maxDTS in prvTraceGetDTS"); - } - prvTraceUpdateCounters(); - } - } - - return (uint16_t)(dts % (param_maxDTS + 1)); -} - -/******************************************************************************* - * prvTraceLookupSymbolTableEntry - * - * Find an entry in the symbol table, return 0 if not present. - * - * The strings are stored in a byte pool, with four bytes of "meta-data" for - * every string. - * byte 0-1: index of next entry with same checksum (for fast lookup). - * byte 2-3: reference to a symbol table entry, a label for vTracePrintF - * format strings only (the handle of the destination channel). - * byte 4..(4 + length): the string (object name or user event label), with - * zero-termination - ******************************************************************************/ -traceLabel prvTraceLookupSymbolTableEntry(const char* name, - uint8_t crc6, - uint8_t len, - traceLabel chn) -{ - uint16_t i = RecorderDataPtr->SymbolTable.latestEntryOfChecksum[ crc6 ]; - - while (i != 0) - { - if (RecorderDataPtr->SymbolTable.symbytes[i + 2] == (chn & 0x00FF)) - { - if (RecorderDataPtr->SymbolTable.symbytes[i + 3] == (chn / 0x100)) - { - if (RecorderDataPtr->SymbolTable.symbytes[i + 4 + len] == '\0') - { - if (strncmp((char*)(& RecorderDataPtr->SymbolTable.symbytes[i + 4]), name, len) == 0) - { - break; /* found */ - } - } - } - } - i = (uint16_t)(RecorderDataPtr->SymbolTable.symbytes[i] + (RecorderDataPtr->SymbolTable.symbytes[i + 1] * 0x100)); - } - return i; -} - -/******************************************************************************* - * prvTraceCreateSymbolTableEntry - * - * Creates an entry in the symbol table, independent if it exists already. - * - * The strings are stored in a byte pool, with four bytes of "meta-data" for - * every string. - * byte 0-1: index of next entry with same checksum (for fast lookup). - * byte 2-3: reference to a symbol table entry, a label for vTracePrintF - * format strings only (the handle of the destination channel). - * byte 4..(4 + length): the string (object name or user event label), with - * zero-termination - ******************************************************************************/ -uint16_t prvTraceCreateSymbolTableEntry(const char* name, - uint8_t crc6, - uint8_t len, - traceLabel channel) -{ - uint16_t ret = 0; - if (RecorderDataPtr->SymbolTable.nextFreeSymbolIndex + len + 4 >= SYMBOL_TABLE_SIZE) - { - vTraceError("Symbol table full. Increase SYMBOL_TABLE_SIZE in trcConfig.h"); - ret = 0; - } - else - { - - RecorderDataPtr->SymbolTable.symbytes - [ RecorderDataPtr->SymbolTable.nextFreeSymbolIndex] = - (uint8_t)(RecorderDataPtr->SymbolTable.latestEntryOfChecksum[ crc6 ] & 0x00FF); - - RecorderDataPtr->SymbolTable.symbytes - [ RecorderDataPtr->SymbolTable.nextFreeSymbolIndex + 1] = - (uint8_t)(RecorderDataPtr->SymbolTable.latestEntryOfChecksum[ crc6 ] / 0x100); - - RecorderDataPtr->SymbolTable.symbytes - [ RecorderDataPtr->SymbolTable.nextFreeSymbolIndex + 2] = - (uint8_t)(channel & 0x00FF); - - RecorderDataPtr->SymbolTable.symbytes - [ RecorderDataPtr->SymbolTable.nextFreeSymbolIndex + 3] = - (uint8_t)(channel / 0x100); - - /* set name (bytes 4...4+len-1) */ - (void)strncpy((char*)&( RecorderDataPtr->SymbolTable.symbytes - [ RecorderDataPtr->SymbolTable.nextFreeSymbolIndex + 4] ), name, len); - - /* Set zero termination (at offest 4+len) */ - RecorderDataPtr->SymbolTable.symbytes - [RecorderDataPtr->SymbolTable.nextFreeSymbolIndex + 4 + len] = '\0'; - - /* store index of entry (for return value, and as head of LL[crc6]) */ - RecorderDataPtr->SymbolTable.latestEntryOfChecksum - [ crc6 ] = (uint16_t)RecorderDataPtr->SymbolTable.nextFreeSymbolIndex; - - RecorderDataPtr->SymbolTable.nextFreeSymbolIndex += (len + 5); - - ret = (uint16_t)(RecorderDataPtr->SymbolTable.nextFreeSymbolIndex - - (len + 5)); - } - - return ret; -} - - -/******************************************************************************* - * prvTraceGetChecksum - * - * Calculates a simple 6-bit checksum from a string, used to index the string - * for fast symbol table lookup. - ******************************************************************************/ -void prvTraceGetChecksum(const char *pname, uint8_t* pcrc, uint8_t* plength) -{ - unsigned char c; - int length = 0; - int crc = 0; - if ( pname != (const char *) 0 ) - { - for ( ; (c = *pname++) != '\0'; ) - { - crc += c; - length++; - } - } - *pcrc = (uint8_t)(crc % 64); - *plength = (uint8_t)length; -} - -#endif diff --git a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/trcKernel.c b/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/trcKernel.c deleted file mode 100644 index 98b84a8ea..000000000 --- a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/trcKernel.c +++ /dev/null @@ -1,491 +0,0 @@ -/******************************************************************************* - * FreeRTOS+Trace v2.3.0 Recorder Library - * Percepio AB, www.percepio.com - * - * trcKernel.c - * - * Functions for integration of the trace recorder library in the FreeRTOS - * kernel (requires FreeRTOS v7.1.0 or later). - * - * Terms of Use - * This software is copyright Percepio AB. The recorder library is free for - * use together with Percepio products. You may distribute the recorder library - * in its original form, including modifications in trcPort.c and trcPort.h - * given that these modification are clearly marked as your own modifications - * and documented in the initial comment section of these source files. - * This software is the intellectual property of Percepio AB and may not be - * sold or in other ways commercially redistributed without explicit written - * permission by Percepio AB. - * - * Disclaimer - * The trace tool and recorder library is being delivered to you AS IS and - * Percepio AB makes no warranty as to its use or performance. Percepio AB does - * not and cannot warrant the performance or results you may obtain by using the - * software or documentation. Percepio AB make no warranties, express or - * implied, as to noninfringement of third party rights, merchantability, or - * fitness for any particular purpose. In no event will Percepio AB, its - * technology partners, or distributors be liable to you for any consequential, - * incidental or special damages, including any lost profits or lost savings, - * even if a representative of Percepio AB has been advised of the possibility - * of such damages, or for any claim by any third party. Some jurisdictions do - * not allow the exclusion or limitation of incidental, consequential or special - * damages, or the exclusion of implied warranties or limitations on how long an - * implied warranty may last, so the above limitations may not apply to you. - * - * FreeRTOS+Trace is available as Free Edition and in two premium editions. - * You may use the premium features during 30 days for evaluation. - * Download FreeRTOS+Trace at http://www.percepio.com/products/downloads/ - * - * Copyright Percepio AB, 2012. - * www.percepio.com - ******************************************************************************/ - -#include "trcUser.h" -#include "task.h" - -#if (configUSE_TRACE_FACILITY == 1) - - - -/****************************************************************************** - * TraceObjectClassTable - * Translates a FreeRTOS QueueType into trace objects classes (TRACE_CLASS_). - * This was added since we want to map both types of Mutex and both types of - * Semaphores on common classes for all Mutexes and all Semaphores respectively. - * - * FreeRTOS Queue types - * #define queueQUEUE_TYPE_BASE ( 0U ) => TRACE_CLASS_QUEUE - * #define queueQUEUE_TYPE_MUTEX ( 1U ) => TRACE_CLASS_MUTEX - * #define queueQUEUE_TYPE_COUNTING_SEMAPHORE ( 2U ) => TRACE_CLASS_SEMAPHORE - * #define queueQUEUE_TYPE_BINARY_SEMAPHORE ( 3U ) => TRACE_CLASS_SEMAPHORE - * #define queueQUEUE_TYPE_RECURSIVE_MUTEX ( 4U ) => TRACE_CLASS_MUTEX - ******************************************************************************/ -traceObjectClass TraceObjectClassTable[5] = {TRACE_CLASS_QUEUE, - TRACE_CLASS_MUTEX, - TRACE_CLASS_SEMAPHORE, - TRACE_CLASS_SEMAPHORE, - TRACE_CLASS_MUTEX }; - -/* This is defined in FreeRTOS! */ -extern volatile void * volatile pxCurrentTCB; - -/* Internal variables */ -uint8_t nISRactive = 0; -objectHandleType handle_of_last_logged_task = 0; -uint8_t inExcludedTask = 0; - -static uint8_t prvTraceIsObjectExcluded(traceObjectClass, uint32_t); - -/******************************************************************************* - * prvTraceIsObjectExcluded - * - * Private function that accepts an object class and an object number and uses - * that to determine if the object has been flagged as excluded. - ******************************************************************************/ -static uint8_t prvTraceIsObjectExcluded(traceObjectClass objectClass, uint32_t objectNumber) -{ - switch(objectClass) - { - case TRACE_CLASS_QUEUE: - return GET_QUEUE_FLAG_ISEXCLUDED(objectNumber); - break; - case TRACE_CLASS_SEMAPHORE: - return GET_SEMAPHORE_FLAG_ISEXCLUDED(objectNumber); - break; - case TRACE_CLASS_MUTEX: - return GET_MUTEX_FLAG_ISEXCLUDED(objectNumber); - break; - case TRACE_CLASS_TASK: - return GET_TASK_FLAG_ISEXCLUDED(objectNumber); - break; - } - return 0; -} - -#if !defined INCLUDE_READY_EVENTS || INCLUDE_READY_EVENTS == 1 -/******************************************************************************* - * vTraceStoreTaskReady - * - * This function stores a ready state for the task handle sent in as parameter. - ******************************************************************************/ -void vTraceStoreTaskReady(objectHandleType handle) -{ - uint16_t dts3; - TREvent* tr; - - if (!GET_TASK_FLAG_ISEXCLUDED(handle)) - { - dts3 = (uint16_t)prvTraceGetDTS(0xFFFF); - if (RecorderDataPtr->recorderActive) /* Need to repeat this check! */ - { - tr = (TREvent*)xTraceNextFreeEventBufferSlot(); - - if (tr != NULL) - { - tr->type = TR_TASK_READY; - tr->dts = dts3; - tr->objHandle = handle; - - prvTraceUpdateCounters(); - } - } - } -} -#endif - -/******************************************************************************* - * vTraceStoreKernelCall - * - * This is the main integration point for storing FreeRTOS kernel calls, and - * is called by the hooks in FreeRTOS.h (see trcKernel.h for event codes). - ******************************************************************************/ -void vTraceStoreKernelCall(uint32_t ecode, traceObjectClass objectClass, uint32_t objectNumber) -{ - KernelCall * kse; - uint16_t dts1; - - if (handle_of_last_logged_task == 0) - { - return; - } - - if (RecorderDataPtr->recorderActive) - { - - /* If it is an ISR or NOT an excluded task, this kernel call will be stored in the trace */ - if (nISRactive || !inExcludedTask) - { - /* Make sure ISRs never change the IFE flags of tasks */ - if (!nISRactive) - { - /* This checks if this is the first kernel call after a call to - vTraceTaskInstanceIsFinished. In that case, calls to this kernel service - with this specific kernel object become the "instance finish event" - (IFE) of the calling task.*/ - if (GET_TASK_FLAG_MARKIFE(handle_of_last_logged_task)) - { - /* Reset the flag - this has been handled now */ - CLEAR_TASK_FLAG_MARKIFE(handle_of_last_logged_task); - - /* Store the kernel service tagged as instance finished event */ - PROPERTY_TASK_IFE_SERVICECODE(handle_of_last_logged_task) = - (uint8_t)ecode; - - /* Store the handle of the specific kernel object */ - PROPERTY_TASK_IFE_OBJHANDLE(handle_of_last_logged_task) = - (objectHandleType)objectNumber; - } - } - - /* Check if the referenced object or the event code is excluded */ - if (!prvTraceIsObjectExcluded(objectClass, objectNumber) && !GET_EVENT_CODE_FLAG_ISEXCLUDED(ecode)) - { - trcCRITICAL_SECTION_BEGIN(); - dts1 = (uint16_t)prvTraceGetDTS(0xFFFF); - - if (RecorderDataPtr->recorderActive) /* Need to repeat this check! */ - { - kse = (KernelCall*) xTraceNextFreeEventBufferSlot(); - if (kse != NULL) - { - kse->dts = dts1; - kse->type = (uint8_t)ecode; - kse->objHandle = (uint8_t)objectNumber; - prvTraceUpdateCounters(); - } - } - trcCRITICAL_SECTION_END(); - } - } - } -} - -/******************************************************************************* - * vTraceStoreKernelCallWithParam - * - * Used for storing kernel calls with a handle and a numeric parameter. This is - * only used for traceTASK_PRIORITY_SET at the moment. - ******************************************************************************/ -void vTraceStoreKernelCallWithParam(uint32_t evtcode, - traceObjectClass objectClass, - uint32_t objectNumber, - uint8_t param) -{ - KernelCallWithParamAndHandle * kse; - uint8_t dts2; - - if (RecorderDataPtr->recorderActive && handle_of_last_logged_task && - (! inExcludedTask || nISRactive)) - { - /* Check if the referenced object or the event code is excluded */ - if (!prvTraceIsObjectExcluded(objectClass, objectNumber) && !GET_EVENT_CODE_FLAG_ISEXCLUDED(evtcode)) - { - trcCRITICAL_SECTION_BEGIN(); - dts2 = (uint8_t)prvTraceGetDTS(0xFF); - - if (RecorderDataPtr->recorderActive) /* Need to repeat this check! */ - { - kse = (KernelCallWithParamAndHandle*) xTraceNextFreeEventBufferSlot(); - if (kse != NULL) - { - kse->dts = dts2; - kse->type = (uint8_t)evtcode; - kse->objHandle = (uint8_t)objectNumber; - kse->param = param; - prvTraceUpdateCounters(); - } - } - trcCRITICAL_SECTION_END(); - } - } -} - - -/******************************************************************************* - * vTraceStoreKernelCallWithNumericParamOnly - * - * Used for storing kernel calls with numeric parameters only. This is - * only used for traceTASK_DELAY and traceDELAY_UNTIL at the moment. - ******************************************************************************/ -void vTraceStoreKernelCallWithNumericParamOnly(uint32_t evtcode, uint16_t param) -{ - KernelCallWithParam16 * kse; - uint8_t dts6; - - if (RecorderDataPtr->recorderActive && handle_of_last_logged_task - && (! inExcludedTask || nISRactive)) - { - /* Check if the event code is excluded */ - if (!GET_EVENT_CODE_FLAG_ISEXCLUDED(evtcode)) - { - trcCRITICAL_SECTION_BEGIN(); - dts6 = (uint8_t)prvTraceGetDTS(0xFF); - - if (RecorderDataPtr->recorderActive) /* Need to repeat this check! */ - { - kse = (KernelCallWithParam16*) xTraceNextFreeEventBufferSlot(); - if (kse != NULL) - { - kse->dts = dts6; - kse->type = (uint8_t)evtcode; - kse->param = param; - prvTraceUpdateCounters(); - } - } - trcCRITICAL_SECTION_END(); - } - } -} - -objectHandleType handle_of_running_task = 0; - -/******************************************************************************* - * vTraceStoreTaskswitch - * Called by the scheduler from the SWITCHED_OUT hook, and by uiTraceStart. - * At this point interrupts are assumed to be disabled! - ******************************************************************************/ -void vTraceStoreTaskswitch(void) -{ - uint16_t dts3; - TSEvent* ts; - int8_t skipEvent = 0; - uint32_t schedulerState = 0; - - /*************************************************************************** - This is used to detect if a high-priority ISRs is illegally using the - recorder ISR trace functions (vTraceStoreISRBegin and ...End) while the - recorder is busy with a task-level event or lower priority ISR event. - - If this is detected, it triggers a call to vTraceError with the error - "Illegal call to vTraceStoreISRBegin/End". If you get this error, it means - that the macro taskENTER_CRITICAL does not disable this ISR, as required. - You can solve this by adjusting the value of the FreeRTOS constant - configMAX_SYSCALL_INTERRUPT_PRIORITY, which is defined in FreeRTOSConfig.h - - Note: Setting recorder_busy is normally handled in our macros - trcCRITICAL_SECTION_BEGIN and _END, but is needed explicitly in this - function since critical sections should not be used in the context switch - event...) - ***************************************************************************/ - recorder_busy++; - - schedulerState = xTaskGetSchedulerState(); - - if (schedulerState == 0) - { - /* This occurs on the very first taskswitch event, generated by - vTraceStart and uiTraceStart if the scheduler is not yet started. - This creates a dummy "(startup)" task entry internally in the - recorder */ - if (handle_of_running_task == 0) - { - handle_of_running_task = xTraceGetObjectHandle(TRACE_CLASS_TASK); - - vTraceSetObjectName(TRACE_CLASS_TASK, - handle_of_running_task, - "(startup)"); - - vTraceSetPriorityProperty(TRACE_CLASS_TASK, - handle_of_running_task, - 0); - } - } - else - { - handle_of_running_task = - (objectHandleType)uxTaskGetTaskNumber(xTaskGetCurrentTaskHandle()); - } - - /* Skip the event if the task has been excluded, using vTraceExcludeTask */ - if (GET_TASK_FLAG_ISEXCLUDED(handle_of_running_task)) - { - skipEvent = 1; - inExcludedTask = 1; - } - else - inExcludedTask = 0; - - - /* Skip the event if the same task is scheduled */ - if (handle_of_running_task == handle_of_last_logged_task) - { - skipEvent = 1; - } - - if (! RecorderDataPtr->recorderActive) - { - skipEvent = 1; - } - - /* If this event should be logged, log it! */ - if (skipEvent == 0) - { - dts3 = (uint16_t)prvTraceGetDTS(0xFFFF); - - if (RecorderDataPtr->recorderActive) /* Need to repeat this check! */ - { - handle_of_last_logged_task = handle_of_running_task; - ts = (TSEvent*)xTraceNextFreeEventBufferSlot(); - - if (ts != NULL) - { - if (uiTraceGetObjectState(TRACE_CLASS_TASK, - handle_of_last_logged_task) == TASK_STATE_INSTANCE_ACTIVE) - { - ts->type = TS_TASK_RESUME; - } - else - { - ts->type = TS_TASK_BEGIN; - } - - ts->dts = dts3; - ts->objHandle = handle_of_last_logged_task; - - vTraceSetObjectState(TRACE_CLASS_TASK, - handle_of_last_logged_task, - TASK_STATE_INSTANCE_ACTIVE); - - prvTraceUpdateCounters(); - } - } - } - - /* See comment on recorder_busy++ above. */ - recorder_busy--; -} - -/******************************************************************************* - * vTraceStoreNameCloseEvent - * - * Updates the symbol table with the name of this object from the dynamic - * objects table and stores a "close" event, holding the mapping between handle - * and name (a symbol table handle). The stored name-handle mapping is thus the - * "old" one, valid up until this point. - ******************************************************************************/ -#if (INCLUDE_OBJECT_DELETE == 1) -void vTraceStoreObjectNameOnCloseEvent(objectHandleType handle, - traceObjectClass objectclass) -{ - ObjCloseNameEvent * ce; - const char * name; - traceLabel idx; - - name = PROPERTY_NAME_GET(objectclass, handle); - - idx = prvTraceOpenSymbol(name, 0); - - // Interrupt disable not necessary, already done in trcHooks.h macro - ce = (ObjCloseNameEvent*) xTraceNextFreeEventBufferSlot(); - if (ce != NULL) - { - ce->type = EVENTGROUP_OBJCLOSE_NAME + objectclass; - ce->objHandle = handle; - ce->symbolIndex = idx; - prvTraceUpdateCounters(); - } - -} - -void vTraceStoreObjectPropertiesOnCloseEvent(objectHandleType handle, - traceObjectClass objectclass) -{ - ObjClosePropEvent * pe; - - if (objectclass == TRACE_CLASS_ISR) - { - /* ISR handles should not be closed - never called for ISR */ - return; - } - - // Interrupt disable not necessary, already done in trcHooks.h macro - pe = (ObjClosePropEvent*) xTraceNextFreeEventBufferSlot(); - if (pe != NULL) - { - if (objectclass == TRACE_CLASS_TASK) - { - pe->arg1 = PROPERTY_ACTOR_PRIORITY(objectclass, handle); - pe->arg2 = PROPERTY_TASK_IFE_SERVICECODE(handle); - pe->arg3 = PROPERTY_TASK_IFE_OBJHANDLE(handle); - PROPERTY_TASK_IFE_SERVICECODE(handle) = 0; - PROPERTY_TASK_IFE_OBJHANDLE(handle) = 0; - }else{ - pe->arg1 = PROPERTY_OBJECT_STATE(objectclass, handle); - } - pe->type = EVENTGROUP_OBJCLOSE_PROP + objectclass; - prvTraceUpdateCounters(); - } -} -#endif - -void vTraceSetPriorityProperty(uint8_t objectclass, uint8_t id, uint8_t value) -{ - PROPERTY_ACTOR_PRIORITY(objectclass, id) = value; -} - -uint8_t uiTraceGetPriorityProperty(uint8_t objectclass, uint8_t id) -{ - return PROPERTY_ACTOR_PRIORITY(objectclass, id); -} - -void vTraceSetObjectState(uint8_t objectclass, uint8_t id, uint8_t value) -{ - PROPERTY_OBJECT_STATE(objectclass, id) = value; -} - -void vTraceSetTaskInstanceFinished(objectHandleType handle) -{ -#if (USE_IMPLICIT_IFE_RULES == 1) - if (PROPERTY_TASK_IFE_SERVICECODE(handle) == 0) - { - PROPERTY_OBJECT_STATE(TRACE_CLASS_TASK, handle) = 0; - } -#endif -} - -uint8_t uiTraceGetObjectState(uint8_t objectclass, uint8_t id) -{ - return PROPERTY_OBJECT_STATE(objectclass, id); -} - -#endif diff --git a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/trcPort.c b/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/trcPort.c deleted file mode 100644 index e98dd57a8..000000000 --- a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/trcPort.c +++ /dev/null @@ -1,208 +0,0 @@ -/******************************************************************************* - * FreeRTOS+Trace v2.3.0 Recorder Library - * Percepio AB, www.percepio.com - * - * trcPort.c - * - * Contains all portability issues of the trace recorder library. - * See also trcPort.h, where port-specific macros are defined. - * - * Terms of Use - * This software is copyright Percepio AB. The recorder library is free for - * use together with Percepio products. You may distribute the recorder library - * in its original form, including modifications in trcPort.c and trcPort.h - * given that these modification are clearly marked as your own modifications - * and documented in the initial comment section of these source files. - * This software is the intellectual property of Percepio AB and may not be - * sold or in other ways commercially redistributed without explicit written - * permission by Percepio AB. - * - * Disclaimer - * The trace tool and recorder library is being delivered to you AS IS and - * Percepio AB makes no warranty as to its use or performance. Percepio AB does - * not and cannot warrant the performance or results you may obtain by using the - * software or documentation. Percepio AB make no warranties, express or - * implied, as to noninfringement of third party rights, merchantability, or - * fitness for any particular purpose. In no event will Percepio AB, its - * technology partners, or distributors be liable to you for any consequential, - * incidental or special damages, including any lost profits or lost savings, - * even if a representative of Percepio AB has been advised of the possibility - * of such damages, or for any claim by any third party. Some jurisdictions do - * not allow the exclusion or limitation of incidental, consequential or special - * damages, or the exclusion of implied warranties or limitations on how long an - * implied warranty may last, so the above limitations may not apply to you. - * - * OFFER FROM PERCEPIO: - * For silicon companies and non-corporate FreeRTOS users (researchers, students - * , hobbyists or early-phase startups) we have an attractive offer: - * Provide a hardware timer port and get a FREE single-user licence for - * FreeRTOS+Trace Professional Edition. Read more about this offer at - * www.percepio.com or contact us directly at support@percepio.com. - * - * FreeRTOS+Trace is available as Free Edition and in two premium editions. - * You may use the premium features during 30 days for evaluation. - * Download FreeRTOS+Trace at http://www.percepio.com/products/downloads/ - * - * Copyright Percepio AB, 2012. - * www.percepio.com - ******************************************************************************/ - -#include "trcUser.h" - -#if (configUSE_TRACE_FACILITY == 1) - -#if (INCLUDE_SAVE_TO_FILE == 1) -static char* prvFileName = NULL; -#endif - - -/******************************************************************************* - * uiTraceTickCount - * - * This variable is updated by the traceTASK_INCREMENT_TICK macro in the - * FreeRTOS tick handler. This does not need to be modified when developing a - * new timer port. It is prefered to keep any timer port changes in the HWTC - * macro definitions, which typically give sufficient flexibility. - ******************************************************************************/ -uint32_t uiTraceTickCount = 0; - -/****************************************************************************** - * uiTracePortGetTimeStamp - * - * Returns the current time based on the HWTC macros which provide a hardware - * isolation layer towards the hardware timer/counter. - * - * The HWTC macros and uiTracePortGetTimeStamp is the main porting issue - * or the trace recorder library. Typically you should not need to change - * the code of uiTracePortGetTimeStamp if using the HWTC macros. - * - * OFFER FROM PERCEPIO: - * For silicon companies and non-corporate FreeRTOS users (researchers, students - * , hobbyists or early-phase startups) we have an attractive offer: - * Provide a hardware timer port and get a FREE single-user license for - * FreeRTOS+Trace Professional Edition. Read more about this offer at - * www.percepio.com or contact us directly at support@percepio.com. - ******************************************************************************/ -void uiTracePortGetTimeStamp(uint32_t *pTimestamp) -{ - static uint32_t last_traceTickCount = 0; - static uint32_t last_hwtc_count = 0; - uint32_t traceTickCount = 0; - uint32_t hwtc_count = 0; - - /* Retrieve HWTC_COUNT only once since the same value should be used all throughout this function. */ -#if (HWTC_COUNT_DIRECTION == DIRECTION_INCREMENTING) - hwtc_count = HWTC_COUNT; -#elif (HWTC_COUNT_DIRECTION == DIRECTION_DECREMENTING) - hwtc_count = HWTC_PERIOD - HWTC_COUNT; -#else - Junk text to cause compiler error - HWTC_COUNT_DIRECTION is not set correctly! - Should be DIRECTION_INCREMENTING or DIRECTION_DECREMENTING -#endif - - if (last_traceTickCount - uiTraceTickCount - 1 < 0x80000000) - { - /* This means last_traceTickCount is higher than uiTraceTickCount, - so we have previously compensated for a missed tick. - Therefore we use the last stored value because that is more accurate. */ - traceTickCount = last_traceTickCount; - } - else - { - /* Business as usual */ - traceTickCount = uiTraceTickCount; - } - - /* Check for overflow. May occur if the update of uiTraceTickCount has been - delayed due to disabled interrupts. */ - if (traceTickCount == last_traceTickCount && hwtc_count < last_hwtc_count) - { - /* A trace tick has occurred but not been executed by the kernel, so we compensate manually. */ - traceTickCount++; - } - - /* Check if the return address is OK, then we perform the calculation. */ - if (pTimestamp) - { - /* Get timestamp from trace ticks. Scale down the period to avoid unwanted overflows. */ - *pTimestamp = traceTickCount * (HWTC_PERIOD / HWTC_DIVISOR); - /* Increase timestamp by (hwtc_count + "lost hardware ticks from scaling down period") / HWTC_DIVISOR. */ - *pTimestamp += (hwtc_count + traceTickCount * (HWTC_PERIOD % HWTC_DIVISOR)) / HWTC_DIVISOR; - } - - /* Store the previous values. */ - last_traceTickCount = traceTickCount; - last_hwtc_count = hwtc_count; -} - -/******************************************************************************* - * vTracePortEnd - * - * This function is called by the monitor when a recorder stop is detected. - * This is used by the Win32 port to store the trace to a file. The file path is - * set using vTracePortSetOutFile. - ******************************************************************************/ -void vTracePortEnd() -{ - vTraceConsoleMessage("\n\r[FreeRTOS+Trace] Running vTracePortEnd.\n\r"); - - #if (WIN32_PORT_SAVE_WHEN_STOPPED == 1) - vTracePortSave(); - #endif - - #if (WIN32_PORT_EXIT_WHEN_STOPPED == 1) - /* In the FreeRTOS/Win32 demo, this allows for killing the application - when the recorder is stopped (e.g., when the buffer is full) */ - system("pause"); - exit(0); - #endif -} - -#if (INCLUDE_SAVE_TO_FILE == 1) -/******************************************************************************* - * vTracePortSetOutFile - * - * Sets the filename/path used in vTracePortSave. - * This is set in a separate function, since the Win32 port calls vTracePortSave - * in vTracePortEnd if WIN32_PORT_SAVE_WHEN_STOPPED is set. - ******************************************************************************/ -void vTracePortSetOutFile(char* path) -{ - prvFileName = path; -} - -/******************************************************************************* - * vTracePortSave - * - * Saves the trace to a file on a local file system. The path is set in a - * separate function, vTracePortSetOutFile, since the Win32 port calls - * vTracePortSave in vTracePortEnd if WIN32_PORT_SAVE_WHEN_STOPPED is set. - ******************************************************************************/ -void vTracePortSave() -{ - char buf[180]; - FILE* f; - - if (prvFileName == NULL) - { - prvFileName = "FreeRTOSPlusTrace.dump"; - sprintf(buf, "No filename specified, using default \"%s\".", prvFileName); - vTraceConsoleMessage(buf); - } - - fopen_s(&f, prvFileName, "wb"); - if (f) - { - fwrite(RecorderDataPtr, sizeof(RecorderDataType), 1, f); - fclose(f); - sprintf(buf, "\n\r[FreeRTOS+Trace] Saved in: %s\n\r", prvFileName); - vTraceConsoleMessage(buf); - } - else - { - sprintf(buf, "\n\r[FreeRTOS+Trace] Failed to write to output file!\n\r"); - vTraceConsoleMessage(buf); - } -} -#endif -#endif \ No newline at end of file diff --git a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/trcUser.c b/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/trcUser.c deleted file mode 100644 index 2e4bc1aac..000000000 --- a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/ThirdParty/TraceRecorderSrc/trcUser.c +++ /dev/null @@ -1,1421 +0,0 @@ -/******************************************************************************* - * FreeRTOS+Trace v2.3.0 Recorder Library - * Percepio AB, www.percepio.com - * - * trcUser.c - * - * The public API of the trace recorder library. - * - * Terms of Use - * This software is copyright Percepio AB. The recorder library is free for - * use together with Percepio products. You may distribute the recorder library - * in its original form, including modifications in trcPort.c and trcPort.h - * given that these modification are clearly marked as your own modifications - * and documented in the initial comment section of these source files. - * This software is the intellectual property of Percepio AB and may not be - * sold or in other ways commercially redistributed without explicit written - * permission by Percepio AB. - * - * Disclaimer - * The trace tool and recorder library is being delivered to you AS IS and - * Percepio AB makes no warranty as to its use or performance. Percepio AB does - * not and cannot warrant the performance or results you may obtain by using the - * software or documentation. Percepio AB make no warranties, express or - * implied, as to noninfringement of third party rights, merchantability, or - * fitness for any particular purpose. In no event will Percepio AB, its - * technology partners, or distributors be liable to you for any consequential, - * incidental or special damages, including any lost profits or lost savings, - * even if a representative of Percepio AB has been advised of the possibility - * of such damages, or for any claim by any third party. Some jurisdictions do - * not allow the exclusion or limitation of incidental, consequential or special - * damages, or the exclusion of implied warranties or limitations on how long an - * implied warranty may last, so the above limitations may not apply to you. - * - * FreeRTOS+Trace is available as Free Edition and in two premium editions. - * You may use the premium features during 30 days for evaluation. - * Download FreeRTOS+Trace at http://www.percepio.com/products/downloads/ - * - * Copyright Percepio AB, 2012. - * www.percepio.com - ******************************************************************************/ - -#include -#include - -#include "trcUser.h" -#include "task.h" -#include "semphr.h" - -#if (configUSE_TRACE_FACILITY == 1) - -extern uint8_t inExcludedTask; -extern uint8_t nISRactive; -extern uint8_t handle_of_last_logged_task; -extern uint32_t dts_min; -extern uint32_t hwtc_count_max_after_tick; -extern uint32_t hwtc_count_sum_after_tick; -extern uint32_t hwtc_count_sum_after_tick_counter; -extern unsigned char ucQueueGetQueueType(void*); -extern unsigned char ucQueueGetQueueNumber(void*); -extern char* traceErrorMessage; -static void vTraceMonitorTask(void); -static void prvTraceExcludeOrIncludeKernelServiceFromTrace(traceKernelService, uint8_t); - -/******************************************************************************* - * vTraceMonitorTask - * - * A task which periodically reports the recorder status to the console. - * This is included depending on USE_TRACE_PROGRESS_MONITOR_TASK. - ******************************************************************************/ -static void vTraceMonitorTask(void) -{ - portTickType xNextWakeTime; - char localsprintbuffer[90]; - char* err = NULL; - char* lastErr = NULL; - #define STATE_INIT 0 - #define STATE_STARTED 1 - #define STATE_STOPPED 2 - int state = STATE_INIT; - - vTraceConsoleMessage("\n\r[FreeRTOS+Trace] Monitor task started...\n\r"); - - /* Initialise xNextWakeTime - this only needs to be done once. */ - xNextWakeTime = xTaskGetTickCount(); - - for (;;) - { - lastErr = err; - err = xTraceGetLastError(); - if (err != lastErr) - { - sprintf(localsprintbuffer, "\n\r[FreeRTOS+Trace] Error: %s\n\r", err); - vTraceConsoleMessage(localsprintbuffer); - } - - if (state == STATE_STOPPED || state == STATE_INIT) - { - if (RecorderDataPtr->recorderActive == 1) - { - state = STATE_STARTED; - vTraceConsoleMessage("\n\r[FreeRTOS+Trace] Recorder started.\n\r"); - } - else - { - if (state == STATE_INIT) - { - - vTraceConsoleMessage("\n\r[FreeRTOS+Trace] Recorder not started.\n\r"); - state = STATE_STOPPED; - } - } - } - - if (state == STATE_STARTED) - { - if (RecorderDataPtr->frequency > 0) - { - sprintf(localsprintbuffer, - "\n\r[FreeRTOS+Trace] Event count: %d, Duration: %d ms. [%d ticks]\n\r", - (int)RecorderDataPtr->numEvents, - (int)(RecorderDataPtr->absTimeLastEventSecond*1000 + (RecorderDataPtr->absTimeLastEvent*1000)/ RecorderDataPtr->frequency), (int)xTaskGetTickCount()); - vTraceConsoleMessage(localsprintbuffer); - } - - if (RecorderDataPtr->recorderActive == 0) - { - state = STATE_STOPPED; - vTraceConsoleMessage("\n\r[FreeRTOS+Trace] Recorder stopped.\n\r"); - vTracePortEnd(); - } - - - } - - /* Place this task in the blocked state until it is time to run again. */ - vTaskDelayUntil( &xNextWakeTime, TRACE_PROGRESS_MONITOR_TASK_PERIOD); - - } -} - -/******************************************************************************* - * vTraceClear - * - * Resets the recorder. Only necessary if a restart is desired - this is not - * needed in the startup initialization. - ******************************************************************************/ -void vTraceClear(void) -{ - trcCRITICAL_SECTION_BEGIN(); - - RecorderDataPtr->absTimeLastEvent = 0; - RecorderDataPtr->nextFreeIndex = 0; - RecorderDataPtr->numEvents = 0; - RecorderDataPtr->bufferIsFull = 0; - - trcCRITICAL_SECTION_END(); - -} - -/******************************************************************************* - * vTraceStartStatusMonitor - * - * This starts a task to monitor the state of½ the recorder. - * This task periodically prints a line to the console window, which shows the - * number of events recorded and the latest timestamp. This task - * calls vTracePortEnd when the recorder has been stopped, where custom - * actions can be added, e.g., to store the trace to a file - * if a file system is available on the device. - ******************************************************************************/ -void vTraceStartStatusMonitor(void) -{ - vTraceConsoleMessage("\n\r[FreeRTOS+Trace] Starting Trace Status Monitor...\n\r"); - (void)xTaskCreate( (pdTASK_CODE)vTraceMonitorTask, (const signed char*)"TraceMon", TRACE_PROGRESS_MONITOR_TASK_STACKSIZE, NULL, TRACE_PROGRESS_MONITOR_TASK_PRIORITY, NULL ); -} - -/******************************************************************************* - * uiTraceStart - * - * Starts the recorder. The recorder will not be started if an error has been - * indicated using vTraceError, e.g. if any of the Nx constants in trcConfig.h - * has a too small value (NTASK, NQUEUE, etc). - * - * Returns 1 if the recorder was started successfully. - * Returns 0 if the recorder start was prevented due to a previous internal - * error. In that case, check vTraceGetLastError to get the error message. - * Any error message is also presented when opening a trace file in - * FreeRTOS+Trace v2.2.2 or later. - ******************************************************************************/ - -uint32_t uiTraceStart(void) -{ - if (traceErrorMessage == NULL) - { - trcCRITICAL_SECTION_BEGIN(); - RecorderDataPtr->recorderActive = 1; - vTraceStoreTaskswitch(); /* Register the currently running task */ - trcCRITICAL_SECTION_END(); - } - - return RecorderDataPtr->recorderActive; -} - -/******************************************************************************* - * vTraceStart - * - * Starts the recorder. The recorder will not be started if an error has been - * indicated using vTraceError, e.g. if any of the Nx constants in trcConfig.h - * has a too small value (NTASK, NQUEUE, etc). - * - * This function is obsolete, but has been saved for backwards compatibility. - * We recommend using uiTraceStart instead. - ******************************************************************************/ -void vTraceStart(void) -{ - (void)uiTraceStart(); -} - -/******************************************************************************* - * vTraceStop - * - * Stops the recorder. The recording can be resumed by calling vTraceStart. - * This does not reset the recorder. Use vTraceClear is that is desired. - ******************************************************************************/ -void vTraceStop(void) -{ - RecorderDataPtr->recorderActive = 0; -} - -/******************************************************************************* - * xTraceGetLastError - * - * Gives the last error message, if any. NULL if no error message is stored. - * The message is cleared on read. - * Any error message is also presented when opening a trace file in - * FreeRTOS+Trace v2.2.2 or later. - ******************************************************************************/ -char* xTraceGetLastError(void) -{ - return traceErrorMessage; -} - -/******************************************************************************* - * vTraceGetTraceBuffer - * - * Returns a pointer to the recorder data structure. Use this together with - * uiTraceGetTraceBufferSize if you wish to implement an own store/upload - * solution, e.g., in case a debugger connection is not available for uploading - * the data. - ******************************************************************************/ -void* vTraceGetTraceBuffer(void) -{ - return RecorderDataPtr; -} - -/******************************************************************************* - * uiTraceGetTraceBufferSize - * - * Gets the size of the recorder data structure. For use together with - * vTraceGetTraceBuffer if you wish to implement an own store/upload solution, - * e.g., in case a debugger connection is not available for uploading the data. - ******************************************************************************/ -uint32_t uiTraceGetTraceBufferSize(void) -{ - return sizeof(RecorderDataType); -} - -/******************************************************************************* - * prvTraceExcludeOrIncludeKernelServiceFromTrace - * - * Includes or excludes all events that is related to the kernel service. - ******************************************************************************/ -static void prvTraceExcludeOrIncludeKernelServiceFromTrace(traceKernelService kernelService, uint8_t flag) -{ - switch(kernelService) - { - case TRACE_KERNEL_SERVICE_TASK_CREATE: - if (flag) - { - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_CREATE + TRACE_CLASS_TASK); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_CREATE + TRACE_CLASS_TASK); - } - else - { - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_CREATE + TRACE_CLASS_TASK); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_CREATE + TRACE_CLASS_TASK); - } - break; - case TRACE_KERNEL_SERVICE_TASK_DELETE: - if (flag) - { - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_DELETE + TRACE_CLASS_TASK); - } - else - { - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_DELETE + TRACE_CLASS_TASK); - } - break; - case TRACE_KERNEL_SERVICE_TASK_DELAY: - if (flag) - { - SET_EVENT_CODE_FLAG_ISEXCLUDED(TASK_DELAY); - SET_EVENT_CODE_FLAG_ISEXCLUDED(TASK_DELAY_UNTIL); - } - else - { - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(TASK_DELAY); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(TASK_DELAY_UNTIL); - } - break; - case TRACE_KERNEL_SERVICE_PRIORITY_SET: - if (flag) - { - SET_EVENT_CODE_FLAG_ISEXCLUDED(TASK_PRIORITY_SET); - } - else - { - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(TASK_PRIORITY_SET); - } - break; - case TRACE_KERNEL_SERVICE_TASK_SUSPEND: - if (flag) - { - SET_EVENT_CODE_FLAG_ISEXCLUDED(TASK_SUSPEND); - } - else - { - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(TASK_SUSPEND); - } - break; - case TRACE_KERNEL_SERVICE_TASK_RESUME: - if (flag) - { - SET_EVENT_CODE_FLAG_ISEXCLUDED(TASK_RESUME); - SET_EVENT_CODE_FLAG_ISEXCLUDED(TASK_RESUME_FROM_ISR); - } - else - { - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(TASK_RESUME); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(TASK_RESUME_FROM_ISR); - } - break; - case TRACE_KERNEL_SERVICE_QUEUE_CREATE: - if (flag) - { - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_CREATE + TRACE_CLASS_QUEUE); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_CREATE + TRACE_CLASS_QUEUE); - } - else - { - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_CREATE + TRACE_CLASS_QUEUE); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_CREATE + TRACE_CLASS_QUEUE); - } - break; - case TRACE_KERNEL_SERVICE_QUEUE_DELETE: - if (flag) - { - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_DELETE + TRACE_CLASS_QUEUE); - } - else - { - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_DELETE + TRACE_CLASS_QUEUE); - } - break; - case TRACE_KERNEL_SERVICE_QUEUE_SEND: - if (flag) - { - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_SEND + TRACE_CLASS_QUEUE); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_SEND + TRACE_CLASS_QUEUE); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_BLOCK_ON_SEND + TRACE_CLASS_QUEUE); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_SEND_FROM_ISR + TRACE_CLASS_QUEUE); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_SEND_FROM_ISR + TRACE_CLASS_QUEUE); - - - } - else - { - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_SEND + TRACE_CLASS_QUEUE); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_SEND + TRACE_CLASS_QUEUE); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_BLOCK_ON_SEND + TRACE_CLASS_QUEUE); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_SEND_FROM_ISR + TRACE_CLASS_QUEUE); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_SEND_FROM_ISR + TRACE_CLASS_QUEUE); - } - break; - case TRACE_KERNEL_SERVICE_QUEUE_RECEIVE: - if (flag) - { - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_RECEIVE + TRACE_CLASS_QUEUE); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_RECEIVE + TRACE_CLASS_QUEUE); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_BLOCK_ON_RECEIVE + TRACE_CLASS_QUEUE); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_RECEIVE_FROM_ISR + TRACE_CLASS_QUEUE); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_RECEIVE_FROM_ISR + TRACE_CLASS_QUEUE); - } - else - { - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_RECEIVE + TRACE_CLASS_QUEUE); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_RECEIVE + TRACE_CLASS_QUEUE); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_BLOCK_ON_RECEIVE + TRACE_CLASS_QUEUE); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_RECEIVE_FROM_ISR + TRACE_CLASS_QUEUE); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_RECEIVE_FROM_ISR + TRACE_CLASS_QUEUE); - } - break; - case TRACE_KERNEL_SERVICE_QUEUE_PEEK: - if (flag) - { - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_PEEK + TRACE_CLASS_QUEUE); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_PEEK + TRACE_CLASS_SEMAPHORE); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_PEEK + TRACE_CLASS_MUTEX); - } - else - { - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_PEEK + TRACE_CLASS_QUEUE); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_PEEK + TRACE_CLASS_SEMAPHORE); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_PEEK + TRACE_CLASS_MUTEX); - } - break; - case TRACE_KERNEL_SERVICE_MUTEX_CREATE: - if (flag) - { - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_CREATE + TRACE_CLASS_MUTEX); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_CREATE + TRACE_CLASS_MUTEX); - } - else - { - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_CREATE + TRACE_CLASS_MUTEX); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_CREATE + TRACE_CLASS_MUTEX); - } - break; - case TRACE_KERNEL_SERVICE_MUTEX_DELETE: - if (flag) - { - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_DELETE + TRACE_CLASS_MUTEX); - } - else - { - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_DELETE + TRACE_CLASS_MUTEX); - } - break; - case TRACE_KERNEL_SERVICE_MUTEX_GIVE: - if (flag) - { - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_SEND + TRACE_CLASS_MUTEX); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_SEND + TRACE_CLASS_MUTEX); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_BLOCK_ON_SEND + TRACE_CLASS_MUTEX); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_SEND_FROM_ISR + TRACE_CLASS_MUTEX); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_SEND_FROM_ISR + TRACE_CLASS_MUTEX); - } - else - { - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_SEND + TRACE_CLASS_MUTEX); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_SEND + TRACE_CLASS_MUTEX); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_BLOCK_ON_SEND + TRACE_CLASS_MUTEX); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_SEND_FROM_ISR + TRACE_CLASS_MUTEX); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_SEND_FROM_ISR + TRACE_CLASS_MUTEX); - } - break; - case TRACE_KERNEL_SERVICE_MUTEX_TAKE: - if (flag) - { - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_RECEIVE + TRACE_CLASS_MUTEX); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_RECEIVE + TRACE_CLASS_MUTEX); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_BLOCK_ON_RECEIVE + TRACE_CLASS_MUTEX); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_RECEIVE_FROM_ISR + TRACE_CLASS_MUTEX); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_RECEIVE_FROM_ISR + TRACE_CLASS_MUTEX); - } - else - { - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_RECEIVE + TRACE_CLASS_MUTEX); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_RECEIVE + TRACE_CLASS_MUTEX); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_BLOCK_ON_RECEIVE + TRACE_CLASS_MUTEX); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_RECEIVE_FROM_ISR + TRACE_CLASS_MUTEX); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_RECEIVE_FROM_ISR + TRACE_CLASS_MUTEX); - } - break; - case TRACE_KERNEL_SERVICE_SEMAPHORE_CREATE: - if (flag) - { - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_CREATE + TRACE_CLASS_SEMAPHORE); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_CREATE + TRACE_CLASS_SEMAPHORE); - } - else - { - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_CREATE + TRACE_CLASS_SEMAPHORE); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_CREATE + TRACE_CLASS_SEMAPHORE); - } - break; - case TRACE_KERNEL_SERVICE_SEMAPHORE_DELETE: - if (flag) - { - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_DELETE + TRACE_CLASS_SEMAPHORE); - } - else - { - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_DELETE + TRACE_CLASS_SEMAPHORE); - } - break; - case TRACE_KERNEL_SERVICE_SEMAPHORE_GIVE: - if (flag) - { - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_SEND + TRACE_CLASS_SEMAPHORE); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_SEND + TRACE_CLASS_SEMAPHORE); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_BLOCK_ON_SEND + TRACE_CLASS_SEMAPHORE); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_SEND_FROM_ISR + TRACE_CLASS_SEMAPHORE); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_SEND_FROM_ISR + TRACE_CLASS_SEMAPHORE); - } - else - { - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_SEND + TRACE_CLASS_SEMAPHORE); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_SEND + TRACE_CLASS_SEMAPHORE); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_BLOCK_ON_SEND + TRACE_CLASS_SEMAPHORE); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_SEND_FROM_ISR + TRACE_CLASS_SEMAPHORE); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_SEND_FROM_ISR + TRACE_CLASS_SEMAPHORE); - } - break; - case TRACE_KERNEL_SERVICE_SEMAPHORE_TAKE: - if (flag) - { - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_RECEIVE + TRACE_CLASS_SEMAPHORE); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_RECEIVE + TRACE_CLASS_SEMAPHORE); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_BLOCK_ON_RECEIVE + TRACE_CLASS_SEMAPHORE); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_RECEIVE_FROM_ISR + TRACE_CLASS_SEMAPHORE); - SET_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_RECEIVE_FROM_ISR + TRACE_CLASS_SEMAPHORE); - } - else - { - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_RECEIVE + TRACE_CLASS_SEMAPHORE); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_RECEIVE + TRACE_CLASS_SEMAPHORE); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_BLOCK_ON_RECEIVE + TRACE_CLASS_SEMAPHORE); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_RECEIVE_FROM_ISR + TRACE_CLASS_SEMAPHORE); - CLEAR_EVENT_CODE_FLAG_ISEXCLUDED(EVENTGROUP_FAILED_RECEIVE_FROM_ISR + TRACE_CLASS_SEMAPHORE); - } - break; - } -} - -/****************************************************************************** - * vTraceExclude______FromTrace - * - * Excludes a task or object from the trace. - * This can be useful if some irrelevant task is very frequent and is "eating - * up the buffer". This should be called after the task has been created, but - * before starting the FreeRTOS scheduler. - *****************************************************************************/ -void vTraceExcludeQueueFromTrace(void* handle) -{ - SET_QUEUE_FLAG_ISEXCLUDED(ucQueueGetQueueNumber(handle)); -} - -void vTraceExcludeSemaphoreFromTrace(void* handle) -{ - SET_SEMAPHORE_FLAG_ISEXCLUDED(ucQueueGetQueueNumber(handle)); -} - -void vTraceExcludeMutexFromTrace(void* handle) -{ - SET_MUTEX_FLAG_ISEXCLUDED(ucQueueGetQueueNumber(handle)); -} - -void vTraceExcludeTaskFromTrace(void* handle) -{ - SET_TASK_FLAG_ISEXCLUDED(uxTaskGetTaskNumber(handle)); -} - -void vTraceExcludeKernelServiceFromTrace(traceKernelService kernelService) -{ - prvTraceExcludeOrIncludeKernelServiceFromTrace(kernelService, 1); -} - -/****************************************************************************** - * vTraceInclude______InTrace - * - * Includes a task, object or kernel service in the trace. This is only - * necessary if the task or object has been previously exluded. - *****************************************************************************/ -void vTraceIncludeQueueInTrace(void* handle) -{ - CLEAR_QUEUE_FLAG_ISEXCLUDED(ucQueueGetQueueNumber(handle)); -} - -void vTraceIncludeSemaphoreInTrace(void* handle) -{ - CLEAR_SEMAPHORE_FLAG_ISEXCLUDED(ucQueueGetQueueNumber(handle)); -} - -void vTraceIncludeMutexInTrace(void* handle) -{ - CLEAR_MUTEX_FLAG_ISEXCLUDED(ucQueueGetQueueNumber(handle)); -} - -void vTraceIncludeTaskInTrace(void* handle) -{ - CLEAR_TASK_FLAG_ISEXCLUDED(uxTaskGetTaskNumber(handle)); -} - -void vTraceIncludeKernelServiceInTrace(traceKernelService kernelService) -{ - prvTraceExcludeOrIncludeKernelServiceFromTrace(kernelService, 0); -} - -/******************************************************************************* - * vTraceSetQueueName - * - * Assigns a name to a FreeRTOS Queue, Semaphore or Mutex. This function should - * be called right after creation of the queue/mutex/semaphore. If not using - * this function, the queues/mutexes/semaphores will be presented by their - * numeric handle only. - * - * Example: - * actuatorQ = xQueueCreate(3, sizeof(QueueMessage)); - * vTraceSetQueueName(actuatorQ, "ActuatorQueue"); - ******************************************************************************/ -void vTraceSetQueueName(void* queue, const char* name) -{ - int t = ucQueueGetQueueType(queue); - vTraceSetObjectName(TraceObjectClassTable[t], - (objectHandleType)ucQueueGetQueueNumber(queue), name); -} - - -/****************************************************************************** - * vTraceTaskInstanceIsFinished - * - * This defines an explicit Instance Finish Event for the current task. It tells - * the recorder that the current instance of this task is finished at the next - * kernel call of the task, e.g., a taskDelay or a queue receive. This function - * should be called right before the api function call considered to be the end - * of the current task instance, i.e., the Instance Finish Event. - *****************************************************************************/ -void vTraceTaskInstanceIsFinished() -{ - if (handle_of_last_logged_task) - { - SET_TASK_FLAG_MARKIFE(handle_of_last_logged_task); - } -} - -/******************************************************************************* - * vvTraceTaskSkipDefaultInstanceFinishedEvents - * - * This is useful if there are implicit Instance Finish Events, such as - * vTaskDelayUntil or xQueueReceive, in a task where an explicit Instance Finish - * Event has been defined. This function tells the recorder that only the - * explicitly defined functions, using vTraceTaskInstanceIsFinished, should be - * treated as Instance Finish Events for this task. The implicit Instance Finish - * Events are thus disregarded for the calling task. - ******************************************************************************/ -void vTraceTaskSkipDefaultInstanceFinishedEvents() -{ - if (handle_of_last_logged_task) - { - PROPERTY_TASK_IFE_SERVICECODE(handle_of_last_logged_task) = - RESERVED_DUMMY_CODE; - } -} - -/******************************************************************************* - * Interrupt recording functions - ******************************************************************************/ - -#if (INCLUDE_ISR_TRACING == 1) - -#define MAX_ISR_NESTING 16 -static uint8_t isrstack[MAX_ISR_NESTING]; - -/******************************************************************************* - * vTraceSetISRProperties - * - * Registers an Interrupt Service Routine in the recorder library, This must be - * called before using vTraceStoreISRBegin to store ISR events. This is - * typically called in the startup of the system, before the scheduler is - * started. - * - * Example: - * #define ID_ISR_TIMER1 1 // lowest valid ID is 1 - * #define PRIO_OF_ISR_TIMER1 3 // the hardware priority of the interrupt - * ... - * vTraceSetISRProperties(ID_ISR_TIMER1, "ISRTimer1", PRIO_OF_ISR_TIMER1); - * ... - * void ISR_handler() - * { - * vTraceStoreISRBegin(ID_OF_ISR_TIMER1); - * ... - * vTraceStoreISREnd(); - * } - * - * NOTE: To safely record ISRs, you need to make sure that all traced - * interrupts actually are disabled by trcCRITICAL_SECTION_BEGIN(), which - * typically is mapped to portENTER_CRITICAL(), which uses the macro - * portDISABLE_INTERRUPTS. However, in some ports of FreeRTOS and depending on - * FreeRTOS configuration, this does not disable high priority interrupts! - * If an ISR calls vTraceStoreISRBegin while the recorder is busy, it will - * stop the recording and give an error message. - ******************************************************************************/ -void vTraceSetISRProperties(objectHandleType handle, const char* name, char priority) -{ - vTraceSetObjectName(TRACE_CLASS_ISR, handle, name); - vTraceSetPriorityProperty(TRACE_CLASS_ISR, handle, priority); -} - -/******************************************************************************* - * vTraceStoreISRBegin - * - * Registers the beginning of an Interrupt Service Routine. - * - * Example: - * #define ID_ISR_TIMER1 1 // lowest valid ID is 1 - * #define PRIO_OF_ISR_TIMER1 3 // the hardware priority of the interrupt - * ... - * vTraceSetISRProperties(ID_ISR_TIMER1, "ISRTimer1", PRIO_OF_ISR_TIMER1); - * ... - * void ISR_handler() - * { - * vTraceStoreISRBegin(ID_OF_ISR_TIMER1); - * ... - * vTraceStoreISREnd(); - * } - * - * NOTE: You need to make sure that any traced interrupts actually are - * disabled by trcCRITICAL_SECTION_BEGIN(), i.e., taskENTER_CRITICAL() which - * uses portDISABLE_INTERRUPTS(). - * In some ports of FreeRTOS, this does not disable high-priority interrupts, - * i.e., with priorities above configMAX_SYSCALL_INTERRUPT_PRIORITY. - * If an invalid call to vTraceStoreISRBegin is detected (i.e., that preempted - * a critical section of the recorder) this will generate a recorder error - * using vTraceError. - ******************************************************************************/ -void vTraceStoreISRBegin(objectHandleType handle) -{ - uint16_t dts4; - TSEvent* ts = NULL; - - if (recorder_busy) - { - vTraceError("Illegal call to vTraceStoreISRBegin/End"); - return; - } - if (RecorderDataPtr->recorderActive && handle_of_last_logged_task) - { - trcCRITICAL_SECTION_BEGIN(); - dts4 = (uint16_t)prvTraceGetDTS(0xFFFF); - - if (RecorderDataPtr->recorderActive) /* Need to repeat this check! */ - { - - if (nISRactive < MAX_ISR_NESTING) - { - isrstack[nISRactive] = handle; - nISRactive++; - ts = (TSEvent*)xTraceNextFreeEventBufferSlot(); - if (ts != NULL) - { - ts->type = TS_ISR_BEGIN; - ts->dts = dts4; - ts->objHandle = handle; - prvTraceUpdateCounters(); - } - } - else - { - /* This should not occur unless something is very wrong */ - vTraceError("Too many nested interrupts!"); - } - } - trcCRITICAL_SECTION_END(); - } -} - - -#if (SELECTED_PORT == PORT_ARM_CortexM) - -int tailchain_irq_pending(void); - -/******************************************************************************* - * tailchain_irq_pending - * - * For Cortex-M chips only. Returns 1 if an interrupt is pending, by checking - * the 8 NVIC IRQ pend registers at 0xE000E200 to 0xE000E21C. Returns 0 if no - * interrupt is pending. This is used to predict tailchaining of ISRs. - ******************************************************************************/ -int tailchain_irq_pending(void) -{ - uint32_t* pend_reg = ((uint32_t*)0xE000E200); - int i; - - for (i=0; i<8; i++) - { - if (pend_reg[i] != 0) - { - return 1; - } - } - return 0; -} - -#endif - -/******************************************************************************* - * vTraceStoreISREnd - * - * Registers the end of an Interrupt Service Routine. - * - * Example: - * #define ID_ISR_TIMER1 1 // lowest valid ID is 1 - * #define PRIO_OF_ISR_TIMER1 3 // the hardware priority of the interrupt - * ... - * vTraceSetISRProperties(ID_ISR_TIMER1, "ISRTimer1", PRIO_OF_ISR_TIMER1); - * ... - * void ISR_handler() - * { - * vTraceStoreISRBegin(ID_OF_ISR_TIMER1); - * ... - * vTraceStoreISREnd(); - * } - * - * NOTE: You need to make sure that any traced interrupts actually are - * disabled by trcCRITICAL_SECTION_BEGIN(), i.e., taskENTER_CRITICAL() which - * uses portDISABLE_INTERRUPTS(). - * In some ports of FreeRTOS, this does not disable high-priority interrupts, - * i.e., with priorities above configMAX_SYSCALL_INTERRUPT_PRIORITY. - * If an invalid call to vTraceStoreISREnd is detected (i.e., that preempted - * a critical section of the recorder) this will generate a recorder error - * using vTraceError. - ******************************************************************************/ -void vTraceStoreISREnd(void) -{ - TSEvent* ts; - uint16_t dts5; - - if (recorder_busy) - { - vTraceError("Illegal call to vTraceStoreISRBegin/End"); - return; - } - - if (RecorderDataPtr->recorderActive && handle_of_last_logged_task) - { - #if (SELECTED_PORT == PORT_ARM_CortexM) - if (tailchain_irq_pending() > 0) - { - nISRactive--; /* If an IRQ strikes exactly here, the resulting - ISR tailchaining is not detected. The trace instead shows a very - short fragment of the earlier preempted task/ISR, and then the new - ISR begins. */ - return; - } - #endif - - trcCRITICAL_SECTION_BEGIN(); - dts5 = (uint16_t)prvTraceGetDTS(0xFFFF); - - if (RecorderDataPtr->recorderActive) /* Need to repeat this check! */ - { - ts = (TSEvent*)xTraceNextFreeEventBufferSlot(); - if (ts != NULL) - { - if (nISRactive > 1) - { - /* return to another isr */ - ts->type = TS_ISR_RESUME; - ts->objHandle = isrstack[nISRactive]; - } - else - { - /* return to task */ - ts->type = TS_TASK_RESUME; - ts->objHandle = handle_of_last_logged_task; - } - ts->dts = dts5; - nISRactive--; - prvTraceUpdateCounters(); - } - } - trcCRITICAL_SECTION_END(); - } -} - -#else - -/* ISR tracing is turned off */ -void vTraceIncreaseISRActive(void) -{ - if (RecorderDataPtr->recorderActive && handle_of_last_logged_task) - nISRactive++; -} - -void vTraceDecreaseISRActive(objectHandleType handle) -{ - if (RecorderDataPtr->recorderActive && handle_of_last_logged_task) - nISRactive--; -} -#endif - - -/******************************************************************************* - * User Event functions - ******************************************************************************/ - -#if (INCLUDE_USER_EVENTS == 1) - - /****************************************************************************** - * vTraceUserEvent - * - * Basic user event (Standard and Professional Edition only) - * - * Generates a User Event with a text label. The label is created/looked up - * in the symbol table using xTraceOpenLabel. - ******************************************************************************/ -void vTraceUserEvent(traceLabel eventLabel) -{ - UserEvent* ue; - uint8_t dts1; - - if (RecorderDataPtr->recorderActive && (! inExcludedTask || nISRactive ) && handle_of_last_logged_task) - { - trcCRITICAL_SECTION_BEGIN(); - - dts1 = (uint8_t)prvTraceGetDTS(0xFF); - - if (RecorderDataPtr->recorderActive) /* Need to repeat this check! */ - { - ue = (UserEvent*) xTraceNextFreeEventBufferSlot(); - if (ue != NULL) - { - ue->dts = dts1; - ue->type = USER_EVENT; - ue->payload = eventLabel; - prvTraceUpdateCounters(); - } - } - trcCRITICAL_SECTION_END(); - } -} - -/*** Locally used in vTracePrintF ***/ - -/* one word (32 bit) is required for the USER_EVENT entry, 8 words -(8*32 bit = 32 byte) available for argument data */ -#define MAX_ARG_SIZE (4+32) - -static uint8_t writeInt8(void * buffer, uint8_t i, uint8_t value); -static uint8_t writeInt16(void * buffer, uint8_t i, uint16_t value); -static uint8_t writeInt32(void * buffer, uint8_t i, uint32_t value); - -#if (INCLUDE_FLOAT_SUPPORT) -static uint8_t writeFloat(void * buffer, uint8_t i, float value); -static uint8_t writeDouble(void * buffer, uint8_t i, double value); -#endif - -/*** Locally used in vTracePrintF ***/ -static uint8_t writeInt8(void * buffer, uint8_t i, uint8_t value) -{ - - if (i >= MAX_ARG_SIZE) - { - return 255; - } - - ((uint8_t*)buffer)[i] = value; - - if (i + 1 > MAX_ARG_SIZE) - { - return 255; - } - - return i + 1; -} - -/*** Locally used in vTracePrintF ***/ -static uint8_t writeInt16(void * buffer, uint8_t i, uint16_t value) -{ - /* Align to multiple of 2 */ - while ((i % 2) != 0) - { - if (i >= MAX_ARG_SIZE) - { - return 255; - } - - ((uint8_t*)buffer)[i] = 0; - i++; - } - - if (i + 2 > MAX_ARG_SIZE) - { - return 255; - } - - ((uint16_t*)buffer)[i/2] = value; - - return i + 2; -} - -/*** Locally used in vTracePrintF ***/ -static uint8_t writeInt32(void * buffer, uint8_t i, uint32_t value) -{ - - /* A 32 bit value should begin at an even 4-byte address */ - while ((i % 4) != 0) - { - if (i >= MAX_ARG_SIZE) - { - return 255; - } - - ((uint8_t*)buffer)[i] = 0; - i++; - } - - if (i + 4 > MAX_ARG_SIZE) - { - return 255; - } - - ((uint32_t*)buffer)[i/4] = value; - - return i + 4; -} - -#if (INCLUDE_FLOAT_SUPPORT) - -/*** Locally used in vTracePrintF ***/ -static uint8_t writeFloat(void * buffer, uint8_t i, float value) -{ - /* A 32 bit value should begin at an even 4-byte address */ - while ((i % 4) != 0) - { - if (i >= MAX_ARG_SIZE) - { - return 255; - } - - ((uint8_t*)buffer)[i] = 0; - i++; - } - - if (i + 4 > MAX_ARG_SIZE) - { - return 255; - } - - ((float*)buffer)[i/4] = value; - - return i + 4; -} - -/*** Locally used in vTracePrintF ***/ -static uint8_t writeDouble(void * buffer, uint8_t i, double value) -{ - uint32_t * dest = buffer; - uint32_t * src = (void*)&value; - /* The double is written as two 32 bit values, and should begin at an even - 4-byte address (to avoid having to align with 8 byte) */ - while (i % 4 != 0) - { - if (i >= MAX_ARG_SIZE) - { - return 255; - } - - ((uint8_t*)buffer)[i] = 0; - i++; - } - - if (i + 8 > MAX_ARG_SIZE) - { - return 255; - } - - dest[i/4+0] = src[0]; - dest[i/4+1] = src[1]; - - return i + 8; -} - -#endif - - /****************************************************************************** - * vTracePrintF - * - * Advanced user events (Professional Edition only) - * - * Generates User Event with formatted text and data, similar to a "printf". - * It is very fast compared to a normal "printf" since this function only - * stores the arguments. The actual formatting is done - * on the host PC when the trace is displayed in the viewer tool. - * - * User Event labels are created using xTraceOpenLabel. - * Example: - * - * traceLabel adc_uechannel = xTraceOpenLabel("ADC User Events"); - * ... - * vTracePrint(adc_uechannel, - * "ADC channel %d: %lf volts", - * ch, (double)adc_reading/(double)scale); - * - * This can be combined into one line, if desired, but this is slower: - * - * vTracePrint(xTraceOpenLabel("ADC User Events"), - * "ADC channel %d: %lf volts", - * ch, (double)adc_reading/(double)scale); - * - * Calling xTraceOpenLabel multiple times will not create duplicate entries, but - * it is of course faster to just do it once, and then keep the handle for later - * use. If you don´t have any data arguments, only a text label/string, it is - * better to use vTraceUserEvent - it is faster. - * - * Format specifiers supported: - * %d - 32 bit signed integer - * %u - 32 bit unsigned integer - * %f - 32 bit float - * %s - string (is copied to the recorder symbol table) - * %hd - 16 bit signed integer - * %hu - 16 bit unsigned integer - * %bd - 8 bit signed integer - * %bu - 8 bit unsigned integer - * %lf - double-precision float - * - * Up to 15 data arguments are allowed, with a total size of maximum 32 byte. - * In case this is exceeded, the user event is changed into an error message. - * - * The data is stored in trace buffer, and is packed to allow storing multiple - * smaller data entries in the same 4-byte record, e.g., four 8-bit values. - * A string requires two bytes, as the symbol table is limited to 64K. Storing a - * double (%lf) uses two records, so this is quite costly. Use float (%f) unless - * the higher precision is really necessary. - ******************************************************************************/ -void vTracePrintF(traceLabel eventLabel, const char* formatStr, ...) -{ - UserEvent* ue1; - va_list vl; - uint8_t argCounter = 0; - uint8_t i = 0; - uint8_t nofEventEntries = 0; - uint16_t formatStrIndex = 0; - - /************************************************************************** - * The array tempDataBuffer is a local buffer used in a two-phase commit of - * the event data, since a vTracePrintF may span over multiple slots in the - * buffer. - * This buffer can be made larger, of course, but remember the risk for - * stack overflow. Note: This should be a LOCAL buffer, must not be made - * global. That would cause data corruption when two calls to vTracePrintF - * from different tasks overlaps (interrupts are only disabled in a small - * part of this function, otherwise enabled) - ***************************************************************************/ - - uint32_t tempDataBuffer[(3 + MAX_ARG_SIZE) / 4]; - - - if ((inExcludedTask == 0) && - (nISRactive == 0) && - (RecorderDataPtr->recorderActive == 1) && - (handle_of_last_logged_task > 0)) - { - /* First, write the "primary" user event entry in the local buffer, but - let the event type be "EVENT_BEING_WRITTEN" for now...*/ - - ue1 = (UserEvent*)(&tempDataBuffer[0]); - ue1->type = EVENT_BEING_WRITTEN; /* Update this as the last step */ - - i = 4; - formatStrIndex = 0; - va_start(vl, formatStr); /* Begin reading the arguments list */ - - while (formatStr[formatStrIndex] != '\0') - { - if (formatStr[formatStrIndex] == '%') - { - argCounter++; - - if (argCounter > 15) - { - vTraceError("vTracePrintF - Too many arguments, max 15 allowed!"); - va_end(vl); - formatStr = "[vTracePrintF error] Too many arguments, max 15 allowed!"; - i = 4; - break; - } - -/******************************************************************************* - * These below code writes raw data (primitive datatypes) in the event buffer, - * instead of the normal event structs (where byte 0 is event type). - * These data entries must never be interpreted as real event data, as the type - * field would be misleading since used for payload data. - * - * The correctness of this encoding depends on two mechanisms: - * - * 1. An initial USER_EVENT, which type code tells the number of 32-bit data - * entires that follows. (code - USER_EVENT = number of data entries). - * Note that a data entry corresponds to the slots that normally corresponds to - * one (1) event, i.e., 32 bits. vTracePrintF may encode several pieces of data - * in one data entry, e.g., two 16-bit values or four 8-bit values, one 16-bit - * value followes by two 8-bit values, etc. - * - * 2. A two-phase commit procedure, where the USER_EVENT and data entries are - * written to a local buffer at first, and when all checks are OK then copied to - * the main event buffer using a fast memcpy. The event code is finalized as the - * very last step. Before that that step, the event code indicates an unfinished - * event, which causes it to be ignored and stop the loading of the file (since - * an unfinished event is the last event in the trace). -*******************************************************************************/ - formatStrIndex++; - switch (formatStr[formatStrIndex]) - { - case 'd': i = writeInt32((uint8_t*)tempDataBuffer, - i, - (uint32_t)va_arg(vl, uint32_t)); - break; - case 'u': i = writeInt32((uint8_t*)tempDataBuffer, - i, - (uint32_t)va_arg(vl, uint32_t)); - break; - case 's': i = writeInt16((uint8_t*)tempDataBuffer, - i, - (uint16_t)xTraceOpenLabel((char*)va_arg(vl, char*))); - break; - -#if (INCLUDE_FLOAT_SUPPORT) - /* Yes, "double" as type also in the float - case. This since "float" is promoted into "double" - by the va_arg stuff. */ - case 'f': i = writeFloat((uint8_t*)tempDataBuffer, - i, - (float)va_arg(vl, double)); - break; -#else -/* No support for floats, but attempt to store a float user event -avoid a possible crash due to float reference. Instead store the -data on uint_32 format (will not be displayed anyway). This is just -to keep va_arg and i consistent. */ - - case 'f': i = writeInt32((uint8_t*)tempDataBuffer, - i, - (uint32_t)va_arg(vl, double)); -#endif - case 'l': - formatStrIndex++; - switch (formatStr[formatStrIndex]) - { -#if (INCLUDE_FLOAT_SUPPORT) - case 'f': i = writeDouble((uint8_t*)tempDataBuffer, - i, - (double)va_arg(vl, double)); - break; -#else -/* No support for floats, but attempt to store a float user event -avoid a possible crash due to float reference. Instead store the -data on uint_32 format (will not be displayed anyway). This is just -to keep va_arg and i consistent. */ - case 'f': i = writeInt32((uint8_t*)tempDataBuffer, /* In this case, the value will not be shown anyway */ - i, - (uint32_t)va_arg(vl, double)); - i = writeInt32((uint8_t*)tempDataBuffer, /* Do it twice, to write in total 8 bytes */ - i, - (uint32_t)va_arg(vl, double)); -#endif - - } - break; - case 'h': - formatStrIndex++; - switch (formatStr[formatStrIndex]) - { - case 'd': i = writeInt16((uint8_t*)tempDataBuffer, - i, - (uint16_t)va_arg(vl, uint32_t)); - break; - case 'u': i = writeInt16((uint8_t*)tempDataBuffer, - i, - (uint16_t)va_arg(vl, uint32_t)); - break; - } - break; - case 'b': - formatStrIndex++; - switch (formatStr[formatStrIndex]) - { - case 'd': i = writeInt8((uint8_t*)tempDataBuffer, - i, - (uint8_t)va_arg(vl, uint32_t)); - break; - case 'u': i = writeInt8((uint8_t*)tempDataBuffer, - i, - (uint8_t)va_arg(vl, uint32_t)); - break; - } - break; - } - } - formatStrIndex++; - if (i == 255) - { - va_end(vl); - //vTraceError("vTracePrintF - Too large arguments, max 32 byte allowed!"); - formatStr = "[vTracePrintF error] Too large arguments, max 32 byte allowed!"; - i = 4; - break; - } - } - - va_end(vl); - - /* Store the format string, with a reference to the channel symbol */ - ue1->payload = prvTraceOpenSymbol(formatStr, eventLabel); - - trcCRITICAL_SECTION_BEGIN(); - - ue1->dts = (uint8_t)prvTraceGetDTS(0xFF); - if (! RecorderDataPtr->recorderActive) - { - - /* Abort, since an XTS event (created by prvTraceGetDTS) filled the - buffer, and the recorder stopped since not circular buffer. */ - trcCRITICAL_SECTION_END(); - - return; - } - - nofEventEntries = (i+3)/4; - - /* If the data does not fit in the remaining main buffer, wrap around to - 0 if allowed, otherwise stop the recorder and quit). */ - if (RecorderDataPtr->nextFreeIndex + nofEventEntries > RecorderDataPtr->maxEvents) - { -#if (RECORDER_STORE_MODE == STORE_MODE_RING_BUFFER) - (void)memset(& RecorderDataPtr->eventData[RecorderDataPtr->nextFreeIndex * 4], - 0, - (RecorderDataPtr->maxEvents - RecorderDataPtr->nextFreeIndex)*4); - RecorderDataPtr->nextFreeIndex = 0; - RecorderDataPtr->bufferIsFull = 1; -#else - /* Abort and stop recorder, since the event data will not fit in the - buffer and not circular buffer in this case... */ - trcCRITICAL_SECTION_END(); - vTraceStop(); - - - return; -#endif - } - -#if (RECORDER_STORE_MODE == STORE_MODE_RING_BUFFER) - /* Check that the buffer to be overwritten does not contain any user - events that would be partially overwritten. If so, they must be "killed" - by replacing the user event and following data with NULL events (i.e., - using a memset to zero).*/ - prvCheckDataToBeOverwrittenForMultiEntryUserEvents(nofEventEntries); -#endif - /* Copy the local buffer to the main buffer */ - (void)memcpy(& RecorderDataPtr->eventData[RecorderDataPtr->nextFreeIndex * 4], - tempDataBuffer, - i); - - /* Update the event type, i.e., number of data entries following the - main USER_EVENT entry (Note: important that this is after the memcpy, - but within the critical section!)*/ - RecorderDataPtr->eventData[RecorderDataPtr->nextFreeIndex * 4] = - (uint8_t) USER_EVENT + nofEventEntries - 1; - - /* Update the main buffer event index (already checked that it fits in - the buffer, so no need to check for wrapping)*/ - - RecorderDataPtr->nextFreeIndex += nofEventEntries; - RecorderDataPtr->numEvents += nofEventEntries; - - if (RecorderDataPtr->nextFreeIndex >= EVENT_BUFFER_SIZE) - { - -#if (RECORDER_STORE_MODE == STORE_MODE_RING_BUFFER) - RecorderDataPtr->nextFreeIndex = 0; - RecorderDataPtr->bufferIsFull = 1; -#else - vTraceStop(); -#endif - } - - trcCRITICAL_SECTION_END(); - } -} - -/******************************************************************************* - * xTraceOpenLabel - * - * Creates user event labels for user event channels or for individual events. - * User events can be used to log application events and data for display in - * the visualization tool. A user event is identified by a label, i.e., a string, - * which is stored in the recorder's symbol table. - * When logging a user event, a numeric handle (reference) to this string is - * used to identify the event. This is obtained by calling - * - * xTraceOpenLabel() - * - * which adds the string to the symbol table (if not already present) - * and returns the corresponding handle. - * - * This can be used in two ways: - * - * 1. The handle is looked up every time, when storing the user event. - * - * Example: - * vTraceUserEvent(xTraceOpenLabel("MyUserEvent")); - * - * 2. The label is registered just once, with the handle stored in an - * application variable - much like using a file handle. - * - * Example: - * myEventHandle = xTraceOpenLabel("MyUserEvent"); - * ... - * vTraceUserEvent(myEventHandle); - * - * The second option is faster since no lookup is required on each event, and - * therefore recommended for user events that are frequently - * executed and/or located in time-critical code. The lookup operation is - * however fairly fast due to the design of the symbol table. - ******************************************************************************/ -traceLabel xTraceOpenLabel(const char* label) -{ - return prvTraceOpenSymbol(label, 0); -} -#endif -#endif - -- 2.39.5