From 8f374fc08415078ef5e8ba514da62bbd7e08e1cb Mon Sep 17 00:00:00 2001 From: uz Date: Thu, 5 Jan 2012 09:31:53 +0000 Subject: [PATCH] Fixed a typo. git-svn-id: svn://svn.cc65.org/cc65/trunk@5387 b7a2c559-68d2-44c3-8de9-860c34a00d81 --- doc/grc65.sgml | 760 ++++++++++++++++++++++++------------------------- 1 file changed, 380 insertions(+), 380 deletions(-) diff --git a/doc/grc65.sgml b/doc/grc65.sgml index 9d3d30f02..39ba27be3 100644 --- a/doc/grc65.sgml +++ b/doc/grc65.sgml @@ -1,384 +1,384 @@ - -
- - - -grc65 -- GEOS Resource Compiler -<author><url name="Maciej 'YTM/Elysium' Witkowiak" url="mailto:ytm@elysium.pl"> -<and><url name="Greg King" url="mailto:gngking@erols.com"> -<date>VII 2000; VI,VII 2002; 2005-8-3 -<abstract> -This document describes a compiler that can create GEOS headers and menues for -cc65-compiled programs. -</abstract> - -<!-- Table of contents --> -<toc> - -<!-- Begin the document --> - -<sect>Overview -<p><bf/grc65/ is a part of cc65's GEOS support. The tool is necessary to -generate required and optional resources. A required resource for every GEOS -application is the header, that is: an icon, some strings, and some addresses. -Optional resources might be menu definitions, other headers (e.g., for data -files of an app.), dialog definitions, etc. Without an application's header, -GEOS is unable to load and start it. - -Currently, <bf/grc65/ supports only menues and the required header definition, -along with support for building applications with VLIR-structured overlays. - -<bf/grc65/ generates output in two formats: C header and <bf/ca65/ source (.s). -That is because the application header data must be in assembly format, while -the menu definitions can be translated easily into C. The purpose of the C -file is to include it as a header in only one project file. The assembly source -should be processed by <bf/ca65/ and linked to the application (read about -<ref name="the building process" id="building-seq">). - - - -<sect>Usage -<p>grc65 accepts the following options: - -<tscreen><verb> ---------------------------------------------------------------------------- -Usage: grc65 [options] file -Short options: - -V Print the version number - -h Help (this text) - -o name Name the C output file - -s name Name the asm output file - -t sys Set the target system - -Long options: - --help Help (this text) - --target sys Set the target system - --version Print the version number ---------------------------------------------------------------------------- -</verb></tscreen> -Default output names are made from input names with extensions replaced by -<tt/.h/ and <tt/.s/. - - - -<sect>Resource file format -<p>A resource file has the name extension <tt/.grc/. That is not required, but -it will make for an easier recognition of the file's purpose. Also, <bf/cl65/ -recognizes those files. <bf/grc65/'s parser is very weak at the moment; so, -read the comments carefully, and write resources exactly as they are written -here. Look out for CAPS and small letters. Everything after a '<tt/;/' -until the end of the line is considered as a comment and ignored. See the -included <ref name="commented example .grc file" id="example-grc"> for a -better view of the situation. - - -<sect1>Menu definition -<p><tscreen><verb> -MENU menuName leftx,topy <ORIENTATION> { - "item name 1" <MENU_TYPE> pointer - ... - "item name x" <MENU_TYPE> pointer -}</verb></tscreen> -The definition starts with the keyword <tt/MENU/, then comes the menu's name, -which will be represented in C as <tt/const void/. Then are the co-ordinates -of the top left corner of the menu box. The position of the bottom right -corner is estimated, based on the length of item names and the menu's -orientation. It means that the menu box always will be as large as it should -be. Then, there's the orientation keyword; it can be either <tt/HORIZONTAL/ or -<tt/VERTICAL/. Between <tt/{/ and <tt/}/, there's the menu's -content. It consists of item definitions. First is an item name -- it has to -be in quotes. Next is a menu-type bit. It can be <tt/MENU_ACTION/ or -<tt/SUB_MENU/; either of them can be combined with the <tt/DYN_SUB_MENU/ bit -(see <url name="the GEOSLib documentation" url="geos.html"> for descriptions of -them). You can use C logical operators in expressions, but you have to do it -without spaces. So a dynamically created submenu will be something like: -<tscreen><verb> -"dynamic" SUB_MENU|DYN_SUB_MENU create_dynamic</verb></tscreen> -The last part of the item definition is a pointer which can be any name that is -present in the C source code that includes the generated header. It can point -to a function or to another menu definition. - -If you are doing sub(sub)menu definitions, remember to place the lowest level -definition first, and the top-level menu as the last one. That way the C -compiler won't complain about unknown names. - - -<sect1>Header definition -<p><tscreen><verb> -HEADER <GEOS_TYPE> "dosname" "classname" "version" { - author "Joe Schmoe" - info "This is my killer-app!" - date yy mm dd hh ss - dostype SEQ - mode any - structure SEQ - icon "sprite.raw" -}</verb></tscreen> -The header definition describes the GEOS header sector which is unique to -each file. The definition starts with the keyword <tt/HEADER/, then goes the -GEOS file-type. You can use only <tt/APPLICATION/ here at the moment. Then, -there are (each one in quotes) the DOS file-name (up to 16 characters), the GEOS -Class name (up to 12 characters), and the version info (up to 4 characters). -The version should be written as &dquot;<tt/V/x.y&dquot;, where <em/x/ is the -major, and <em/y/ is the minor, version number. Those fields, along with both -braces, are required. The lines between braces are optional, and will be replaced -by default and current values. The keyword <tt/author/ and its value in quotes name -the programmer, and can be up to 63 bytes long. <tt/info/ (in the same format) can -have up to 95 characters. If the <tt/date/ field is omitted, then the time of -that compilation will be placed into the header. Note that, if you do specify -the date, you have to write all 5 numbers. The <tt/dostype/ can be <tt/SEQ/, -<tt/PRG/, or <tt/USR/. <tt/USR/ is used by default; GEOS usually doesn't care. -The <tt/mode/ can be <tt/any/, <tt/40only/, <tt/80only/, or <tt/c64only/; and, -it describes system requirements. <tt/any/ will work on both 64-GEOS and -128-GEOS, in 40- and 80-column modes. <tt/40only/ will work on 128-GEOS in -40-column mode only. <tt/80only/ will work on only 128-GEOS in 80-column mode, -and <tt/c64only/ will work on only 64-GEOS. The default value for -<tt/structure/ is <tt/SEQ/ (sequential). You can put <tt/VLIR/ there, too; but -then, you also have to put in a third type of resource -- a memory definition. -The value of <tt/icon/ is a quoted file-name. The first 63 bytes of this file -are expected to represent a standard monochrome VIC sprite. The file gets accessed -when the generated assembly source is be processed by <bf/ca65/. Examples for -programs generating such files are <em/Sprite Painter/ and <em/SpritePad/. The -default <tt/icon/ is an empty frame internally represented in the generated assembly -file. - - -<sect1>Memory definition -<p><tscreen><verb> -MEMORY { - stacksize 0x0800 - overlaysize 0x2000 - overlaynums 0 1 2 4 5 -}</verb></tscreen> -The memory definition is unique to each file and describes several attributes related -to the memory layout. It consists of the keyword <tt/MEMORY/ followed by braces which -contain optional lines. The value of <tt/stacksize/ can be either decimal (e.g. -<tt/4096/) or hexadecimal with a <tt/0x/ prefix (e.g. <tt/0x1000/). The default value -of 0x400 comes from the linker configuration file. The value of <tt/backbuffer/ can be -either <tt/yes/ or <tt/no/. The further means that the application uses the system-supplied -background screen buffer while the latter means that the program uses the memory of the -background screen buffer for own purposes. The default value of <tt/yes/ comes from the -linker configuration file. If the <tt/structure/ in the header definition is set to the -value <tt/VLIR/ then it is possible and necessary to provide here the attributes of the -VLIR overlays. <tt/overlaysize/ defines the maximal size for all VLIR records but number -0. It can be either decimal (e.g. <tt/4096/) or hexadecimal with a <tt/0x/ prefix (e.g. -<tt/0x1000/). <tt/overlaynums/ defines the VLIR record numbers used by the application. -Skipped numbers denote empty records. In the example, record number 3 is missing. Read -<ref name="this description" id="building-vlir"> for details. - - - -<sect>Building a GEOS sequential application<label id="building-seq"> -<p>Before proceeding, please read the <url name="compiler" url="cc65.html">, -<url name="assembler" url="ca65.html">, and <url name="linker" url="ld65.html"> -documentation, and find the appropriate sections about building programs, in -general. - -GEOS support in cc65 is based on the <em/Convert v2.5/ format, well-known in -the GEOS world. It means that each file built with the cc65 package has to be -deconverted in GEOS, before it can be run. You can read a step-by-step -description of that in the <url name="GEOS section of the cc65 Compiler Intro" -url="intro-6.html#ss6.5">. - -Each project consists of four parts, two are provided by cc65. Those parts -are:<enum> -<item>application header -<item>start-up object -<item>application objects -<item>system library -</enum> -<bf/2./ and <bf/4./ come with cc65; however you have to write the application -yourself ;-) - -The application header is defined in the <tt/HEADER/ section of the <tt/.grc/ -file and is processed into an assembly <tt/.s/ file. You must assemble it, with -<bf/ca65/, into the object <tt/.o/ format. - -Assume that there are three input files: &dquot;<tt/test.c/&dquot; (a C -source), &dquot;<tt/test.h/&dquot; (a header file), and -&dquot;<tt/testres.grc/&dquot; (with menu and header definitions). Note the -fact that I <em/don't recommend/ naming that file &dquot;<tt/test.grc/&dquot; -because you will have to be very careful with names (<bf/grc65/ will make -&dquot;<tt/test.s/&dquot; and &dquot;<tt/test.h/&dquot; out of -&dquot;<tt/test.grc/&dquot; by default; and you don't want that because -&dquot;<tt/test.s/&dquot; is compiled from &dquot;<tt/test.c/&dquot;, and -&dquot;<tt/test.h/&dquot; is something completely different)! - -<bf/One important thing/ -- the top of &dquot;<tt/test.c/&dquot; looks like: -<tscreen><verb> -#include <geos.h> -#include "testres.h" -</verb></tscreen> -There are no other includes. - - -<sect1>Building the GEOS application using cl65 -<p>This is a simple one step process: -<tscreen><verb> -cl65 -t geos-cbm -O -o test.cvt testres.grc test.c -</verb></tscreen> -Always place the <tt/.grc/ file as first input file on the command-line in order -to make sure that the generated <tt/.h/ file is available when it is needed for -inclusion by a <tt/.c/ file. - - -<sect1>Building the GEOS application without cl65 -<sect2>First step -- compiling the resources -<tscreen><verb> -grc65 -t geos-cbm testres.grc -</verb></tscreen> -will produce two output files: &dquot;<tt/testres.h/&dquot; and -&dquot;<tt/testres.s/&dquot;. - -Note that &dquot;<tt/testres.h/&dquot; is included at the top of -&dquot;<tt/test.c/&dquot;. So, resource compiling <em/must be/ the first step. - -<sect2>Second step -- assembling the application header -<tscreen><verb> -ca65 -t geos-cbm testres.s -</verb></tscreen> -And, voilá -- &dquot;<tt/testres.o/&dquot; is ready. - -<sect2>Third step -- compiling the code -<tscreen><verb> -cc65 -t geos-cbm -O test.c -ca65 -t geos-cbm test.s -</verb></tscreen> -That way, you have a &dquot;<tt/test.o/&dquot; object file which -contains all of the executable code. - -<sect2>Fourth and last step -- linking it together -<tscreen><verb> -ld65 -t geos-cbm -o test.cvt testres.o test.o geos.lib -</verb></tscreen> -The last file is the GEOS system library. - -The resulting file &dquot;<tt/test.cvt/&dquot; is an executable that's -contained in the well-known GEOS <em/Convert/ format. Note that its name -(<tt/test.cvt/) isn't important; the real name, after deconverting, is the DOS name -that was given in the header definition. - -At each step, a <tt/-t geos-cbm/ was present on the command-line. That switch is -required for the correct process of GEOS sequential application building. - - - -<sect>Building a GEOS VLIR overlay application<label id="building-vlir"> -<p>Large GEOS applications typically don't fit in one piece in their designated -memeory area. They are therefore split into overlays which are loaded into memory +<!doctype linuxdoc system> +<article> + +<!-- Title information --> + +<title>grc65 -- GEOS Resource Compiler +<author><url name="Maciej 'YTM/Elysium' Witkowiak" url="mailto:ytm@elysium.pl"> +<and><url name="Greg King" url="mailto:gngking@erols.com"> +<date>VII 2000; VI,VII 2002; 2005-8-3 +<abstract> +This document describes a compiler that can create GEOS headers and menues for +cc65-compiled programs. +</abstract> + +<!-- Table of contents --> +<toc> + +<!-- Begin the document --> + +<sect>Overview +<p><bf/grc65/ is a part of cc65's GEOS support. The tool is necessary to +generate required and optional resources. A required resource for every GEOS +application is the header, that is: an icon, some strings, and some addresses. +Optional resources might be menu definitions, other headers (e.g., for data +files of an app.), dialog definitions, etc. Without an application's header, +GEOS is unable to load and start it. + +Currently, <bf/grc65/ supports only menues and the required header definition, +along with support for building applications with VLIR-structured overlays. + +<bf/grc65/ generates output in two formats: C header and <bf/ca65/ source (.s). +That is because the application header data must be in assembly format, while +the menu definitions can be translated easily into C. The purpose of the C +file is to include it as a header in only one project file. The assembly source +should be processed by <bf/ca65/ and linked to the application (read about +<ref name="the building process" id="building-seq">). + + + +<sect>Usage +<p>grc65 accepts the following options: + +<tscreen><verb> +--------------------------------------------------------------------------- +Usage: grc65 [options] file +Short options: + -V Print the version number + -h Help (this text) + -o name Name the C output file + -s name Name the asm output file + -t sys Set the target system + +Long options: + --help Help (this text) + --target sys Set the target system + --version Print the version number +--------------------------------------------------------------------------- +</verb></tscreen> +Default output names are made from input names with extensions replaced by +<tt/.h/ and <tt/.s/. + + + +<sect>Resource file format +<p>A resource file has the name extension <tt/.grc/. That is not required, but +it will make for an easier recognition of the file's purpose. Also, <bf/cl65/ +recognizes those files. <bf/grc65/'s parser is very weak at the moment; so, +read the comments carefully, and write resources exactly as they are written +here. Look out for CAPS and small letters. Everything after a '<tt/;/' +until the end of the line is considered as a comment and ignored. See the +included <ref name="commented example .grc file" id="example-grc"> for a +better view of the situation. + + +<sect1>Menu definition +<p><tscreen><verb> +MENU menuName leftx,topy <ORIENTATION> { + "item name 1" <MENU_TYPE> pointer + ... + "item name x" <MENU_TYPE> pointer +}</verb></tscreen> +The definition starts with the keyword <tt/MENU/, then comes the menu's name, +which will be represented in C as <tt/const void/. Then are the co-ordinates +of the top left corner of the menu box. The position of the bottom right +corner is estimated, based on the length of item names and the menu's +orientation. It means that the menu box always will be as large as it should +be. Then, there's the orientation keyword; it can be either <tt/HORIZONTAL/ or +<tt/VERTICAL/. Between <tt/{/ and <tt/}/, there's the menu's +content. It consists of item definitions. First is an item name -- it has to +be in quotes. Next is a menu-type bit. It can be <tt/MENU_ACTION/ or +<tt/SUB_MENU/; either of them can be combined with the <tt/DYN_SUB_MENU/ bit +(see <url name="the GEOSLib documentation" url="geos.html"> for descriptions of +them). You can use C logical operators in expressions, but you have to do it +without spaces. So a dynamically created submenu will be something like: +<tscreen><verb> +"dynamic" SUB_MENU|DYN_SUB_MENU create_dynamic</verb></tscreen> +The last part of the item definition is a pointer which can be any name that is +present in the C source code that includes the generated header. It can point +to a function or to another menu definition. + +If you are doing sub(sub)menu definitions, remember to place the lowest level +definition first, and the top-level menu as the last one. That way the C +compiler won't complain about unknown names. + + +<sect1>Header definition +<p><tscreen><verb> +HEADER <GEOS_TYPE> "dosname" "classname" "version" { + author "Joe Schmoe" + info "This is my killer-app!" + date yy mm dd hh ss + dostype SEQ + mode any + structure SEQ + icon "sprite.raw" +}</verb></tscreen> +The header definition describes the GEOS header sector which is unique to +each file. The definition starts with the keyword <tt/HEADER/, then goes the +GEOS file-type. You can use only <tt/APPLICATION/ here at the moment. Then, +there are (each one in quotes) the DOS file-name (up to 16 characters), the GEOS +Class name (up to 12 characters), and the version info (up to 4 characters). +The version should be written as &dquot;<tt/V/x.y&dquot;, where <em/x/ is the +major, and <em/y/ is the minor, version number. Those fields, along with both +braces, are required. The lines between braces are optional, and will be replaced +by default and current values. The keyword <tt/author/ and its value in quotes name +the programmer, and can be up to 63 bytes long. <tt/info/ (in the same format) can +have up to 95 characters. If the <tt/date/ field is omitted, then the time of +that compilation will be placed into the header. Note that, if you do specify +the date, you have to write all 5 numbers. The <tt/dostype/ can be <tt/SEQ/, +<tt/PRG/, or <tt/USR/. <tt/USR/ is used by default; GEOS usually doesn't care. +The <tt/mode/ can be <tt/any/, <tt/40only/, <tt/80only/, or <tt/c64only/; and, +it describes system requirements. <tt/any/ will work on both 64-GEOS and +128-GEOS, in 40- and 80-column modes. <tt/40only/ will work on 128-GEOS in +40-column mode only. <tt/80only/ will work on only 128-GEOS in 80-column mode, +and <tt/c64only/ will work on only 64-GEOS. The default value for +<tt/structure/ is <tt/SEQ/ (sequential). You can put <tt/VLIR/ there, too; but +then, you also have to put in a third type of resource -- a memory definition. +The value of <tt/icon/ is a quoted file-name. The first 63 bytes of this file +are expected to represent a standard monochrome VIC sprite. The file gets accessed +when the generated assembly source is be processed by <bf/ca65/. Examples for +programs generating such files are <em/Sprite Painter/ and <em/SpritePad/. The +default <tt/icon/ is an empty frame internally represented in the generated assembly +file. + + +<sect1>Memory definition +<p><tscreen><verb> +MEMORY { + stacksize 0x0800 + overlaysize 0x2000 + overlaynums 0 1 2 4 5 +}</verb></tscreen> +The memory definition is unique to each file and describes several attributes related +to the memory layout. It consists of the keyword <tt/MEMORY/ followed by braces which +contain optional lines. The value of <tt/stacksize/ can be either decimal (e.g. +<tt/4096/) or hexadecimal with a <tt/0x/ prefix (e.g. <tt/0x1000/). The default value +of 0x400 comes from the linker configuration file. The value of <tt/backbuffer/ can be +either <tt/yes/ or <tt/no/. The further means that the application uses the system-supplied +background screen buffer while the latter means that the program uses the memory of the +background screen buffer for own purposes. The default value of <tt/yes/ comes from the +linker configuration file. If the <tt/structure/ in the header definition is set to the +value <tt/VLIR/ then it is possible and necessary to provide here the attributes of the +VLIR overlays. <tt/overlaysize/ defines the maximal size for all VLIR records but number +0. It can be either decimal (e.g. <tt/4096/) or hexadecimal with a <tt/0x/ prefix (e.g. +<tt/0x1000/). <tt/overlaynums/ defines the VLIR record numbers used by the application. +Skipped numbers denote empty records. In the example, record number 3 is missing. Read +<ref name="this description" id="building-vlir"> for details. + + + +<sect>Building a GEOS sequential application<label id="building-seq"> +<p>Before proceeding, please read the <url name="compiler" url="cc65.html">, +<url name="assembler" url="ca65.html">, and <url name="linker" url="ld65.html"> +documentation, and find the appropriate sections about building programs, in +general. + +GEOS support in cc65 is based on the <em/Convert v2.5/ format, well-known in +the GEOS world. It means that each file built with the cc65 package has to be +deconverted in GEOS, before it can be run. You can read a step-by-step +description of that in the <url name="GEOS section of the cc65 Compiler Intro" +url="intro-6.html#ss6.5">. + +Each project consists of four parts, two are provided by cc65. Those parts +are:<enum> +<item>application header +<item>start-up object +<item>application objects +<item>system library +</enum> +<bf/2./ and <bf/4./ come with cc65; however you have to write the application +yourself ;-) + +The application header is defined in the <tt/HEADER/ section of the <tt/.grc/ +file and is processed into an assembly <tt/.s/ file. You must assemble it, with +<bf/ca65/, into the object <tt/.o/ format. + +Assume that there are three input files: &dquot;<tt/test.c/&dquot; (a C +source), &dquot;<tt/test.h/&dquot; (a header file), and +&dquot;<tt/testres.grc/&dquot; (with menu and header definitions). Note the +fact that I <em/don't recommend/ naming that file &dquot;<tt/test.grc/&dquot; +because you will have to be very careful with names (<bf/grc65/ will make +&dquot;<tt/test.s/&dquot; and &dquot;<tt/test.h/&dquot; out of +&dquot;<tt/test.grc/&dquot; by default; and you don't want that because +&dquot;<tt/test.s/&dquot; is compiled from &dquot;<tt/test.c/&dquot;, and +&dquot;<tt/test.h/&dquot; is something completely different)! + +<bf/One important thing/ -- the top of &dquot;<tt/test.c/&dquot; looks like: +<tscreen><verb> +#include <geos.h> +#include "testres.h" +</verb></tscreen> +There are no other includes. + + +<sect1>Building the GEOS application using cl65 +<p>This is a simple one step process: +<tscreen><verb> +cl65 -t geos-cbm -O -o test.cvt testres.grc test.c +</verb></tscreen> +Always place the <tt/.grc/ file as first input file on the command-line in order +to make sure that the generated <tt/.h/ file is available when it is needed for +inclusion by a <tt/.c/ file. + + +<sect1>Building the GEOS application without cl65 +<sect2>First step -- compiling the resources +<tscreen><verb> +grc65 -t geos-cbm testres.grc +</verb></tscreen> +will produce two output files: &dquot;<tt/testres.h/&dquot; and +&dquot;<tt/testres.s/&dquot;. + +Note that &dquot;<tt/testres.h/&dquot; is included at the top of +&dquot;<tt/test.c/&dquot;. So, resource compiling <em/must be/ the first step. + +<sect2>Second step -- assembling the application header +<tscreen><verb> +ca65 -t geos-cbm testres.s +</verb></tscreen> +And, voilá -- &dquot;<tt/testres.o/&dquot; is ready. + +<sect2>Third step -- compiling the code +<tscreen><verb> +cc65 -t geos-cbm -O test.c +ca65 -t geos-cbm test.s +</verb></tscreen> +That way, you have a &dquot;<tt/test.o/&dquot; object file which +contains all of the executable code. + +<sect2>Fourth and last step -- linking it together +<tscreen><verb> +ld65 -t geos-cbm -o test.cvt testres.o test.o geos.lib +</verb></tscreen> +The last file is the GEOS system library. + +The resulting file &dquot;<tt/test.cvt/&dquot; is an executable that's +contained in the well-known GEOS <em/Convert/ format. Note that its name +(<tt/test.cvt/) isn't important; the real name, after deconverting, is the DOS name +that was given in the header definition. + +At each step, a <tt/-t geos-cbm/ was present on the command-line. That switch is +required for the correct process of GEOS sequential application building. + + + +<sect>Building a GEOS VLIR overlay application<label id="building-vlir"> +<p>Large GEOS applications typically don't fit in one piece in their designated +memeory area. They are therefore split into overlays which are loaded into memory on demand. The individual overlays are stored as records of a VLIR (Variable Length Index Record) file. When GEOS starts a VLIR overlay appliation it loads record number 0 which is supposed to contain the main program. The record numbers starting with 1 are to be used for the actual overlays. - -In "<tt>cc65/samples/geos</tt>" there's a VLIR overlay demo application consisting -of the files "<tt/overlay-demo.c/" and "<tt/overlay-demores.grc/". - - -<sect1>Building the GEOS application using cl65 -<p>This is a simple one step process: -<tscreen><verb> -cl65 -t geos-cbm -O -o overlay-demo.cvt -m overlay-demo.map overlay-demores.grc overlay-demo.c -</verb></tscreen> -Always place the <tt/.grc/ file as first input file on the command-line in order -to make sure that the generated <tt/.h/ file is available when it is needed for -inclusion by a <tt/.c/ file. - -You will almost certianly want to generate a map file that shows (beside a lot of -other infos) how large your individual overlays are. This info is necessary to tune -the distribution of code into the overlays and optimizes the memory area reserved -for the overlays. - - -<sect1>Building the GEOS application without cl65 -<sect2>First step -- compiling the resources -<tscreen><verb> -grc65 -t geos-cbm overlay-demores.grc -</verb></tscreen> - -<sect2>Second step -- assembling the application header -<tscreen><verb> -ca65 -t geos-cbm overlay-demores.s -</verb></tscreen> - -<sect2>Third step -- compiling the code -<tscreen><verb> -cc65 -t geos-cbm -O overlay-demo.c -ca65 -t geos-cbm overlay-demo.s -</verb></tscreen> - -<sect2>Fourth and last step -- linking it together -<tscreen><verb> -ld65 -t geos-cbm -o overlay-demo.cvt -m overlay-demo.map overlay-demores.o overlay-demo.o geos.lib -</verb></tscreen> - - - -<sect>Bugs and feedback -<p>This is the first release of <bf/grc65/, and it contains bugs, for sure! I -am aware of them; I know that the parser is weak, and if you don't follow the -grammar rules strictly, then everything will crash. However, if you find an -interesting bug, mail me. :-) Mail me also for help with writing your -<tt/.grc/ file correctly if you have problems with it. I would appreciate -comments also, and help on this file because I am sure that it can be written -better. - - - -<sect>Legal stuff -<p><bf/grc65/ is covered by the same license as the whole cc65 package, so you -should see its documentation for more info. Anyway, if you like it, and want -to encourage me to work more on it, send me a postcard with a sight of your -neighbourhood, city, region, etc. Or, just e-mail me with info that you -actually used it. See <url name="the GEOSLib documentation" url="geos.html"> -for addresses. - - - -<appendix> -<sect>Appendix A -- example.grc<label id="example-grc"> -<p><tscreen><verb> -; Note that MENU can define both menues and submenues. -; If you want to use any C operators (such as "|", "&", etc.), do it WITHOUT -; any spaces between the arguments (the parser is simple and weak). - -MENU subMenu1 15,0 VERTICAL -; This is a vertical menu, placed at (15,0). -{ -; There are three items, all of them will call functions. -; The first and third ones are normal functions, see GEOSLib documentation for -; information about what the second function should return (it's a dynamic one). - "subitem1" MENU_ACTION smenu1 - "subitem2" MENU_ACTION|DYN_SUB_MENU smenu2 - "subitem3" MENU_ACTION smenu3 -} - -;; Format: MENU "name" left,top ALIGN { "itemname" TYPE pointer ... } - -MENU mainMenu 0,0 HORIZONTAL -; Here, we have our main menu, placed at (0,0), and it is a horizontal menu. -; Because it is a top-level menu, you would register it in your C source by -; using: DoMenu(&ero;mainMenu); -{ -; There are two items -- a submenu and an action. -; This calls a submenu named subMenu1 (see previous definition). - "first sub-menu" SUB_MENU subMenu1 -; This will work the same as an EnterDeskTop() call in C source code. - "quit" MENU_ACTION EnterDeskTop -} - -;; Format: HEADER <GEOS_TYPE> "dosname" "classname" "version" - -HEADER APPLICATION "MyFirstApp" "Class Name" "V1.0" -; This is a header for an APPLICATION which will be seen in the directory as a -; file named MyFirstApp with the Class-string "Class Name V1.0" -{ -; Not all fields are required, default and current values will be used. - author "Maciej Witkowiak" ; always in quotes! - info "Information text" ; always in quotes! -; date yy mm dd hh ss ; always 5 fields! -; dostype seq ; can be: PRG, SEQ, USR (only all UPPER- or lower-case) -; structure seq ; can be: SEQ, VLIR (only UPPER- or lower-case) - mode c64only ; can be: any, 40only, 80only, c64only -}</verb></tscreen> -</article> + +In "<tt>cc65/samples/geos</tt>" there's a VLIR overlay demo application consisting +of the files "<tt/overlay-demo.c/" and "<tt/overlay-demores.grc/". + + +<sect1>Building the GEOS application using cl65 +<p>This is a simple one step process: +<tscreen><verb> +cl65 -t geos-cbm -O -o overlay-demo.cvt -m overlay-demo.map overlay-demores.grc overlay-demo.c +</verb></tscreen> +Always place the <tt/.grc/ file as first input file on the command-line in order +to make sure that the generated <tt/.h/ file is available when it is needed for +inclusion by a <tt/.c/ file. + +You will almost certainly want to generate a map file that shows (beside a lot of +other infos) how large your individual overlays are. This info is necessary to tune +the distribution of code into the overlays and optimizes the memory area reserved +for the overlays. + + +<sect1>Building the GEOS application without cl65 +<sect2>First step -- compiling the resources +<tscreen><verb> +grc65 -t geos-cbm overlay-demores.grc +</verb></tscreen> + +<sect2>Second step -- assembling the application header +<tscreen><verb> +ca65 -t geos-cbm overlay-demores.s +</verb></tscreen> + +<sect2>Third step -- compiling the code +<tscreen><verb> +cc65 -t geos-cbm -O overlay-demo.c +ca65 -t geos-cbm overlay-demo.s +</verb></tscreen> + +<sect2>Fourth and last step -- linking it together +<tscreen><verb> +ld65 -t geos-cbm -o overlay-demo.cvt -m overlay-demo.map overlay-demores.o overlay-demo.o geos.lib +</verb></tscreen> + + + +<sect>Bugs and feedback +<p>This is the first release of <bf/grc65/, and it contains bugs, for sure! I +am aware of them; I know that the parser is weak, and if you don't follow the +grammar rules strictly, then everything will crash. However, if you find an +interesting bug, mail me. :-) Mail me also for help with writing your +<tt/.grc/ file correctly if you have problems with it. I would appreciate +comments also, and help on this file because I am sure that it can be written +better. + + + +<sect>Legal stuff +<p><bf/grc65/ is covered by the same license as the whole cc65 package, so you +should see its documentation for more info. Anyway, if you like it, and want +to encourage me to work more on it, send me a postcard with a sight of your +neighbourhood, city, region, etc. Or, just e-mail me with info that you +actually used it. See <url name="the GEOSLib documentation" url="geos.html"> +for addresses. + + + +<appendix> +<sect>Appendix A -- example.grc<label id="example-grc"> +<p><tscreen><verb> +; Note that MENU can define both menues and submenues. +; If you want to use any C operators (such as "|", "&", etc.), do it WITHOUT +; any spaces between the arguments (the parser is simple and weak). + +MENU subMenu1 15,0 VERTICAL +; This is a vertical menu, placed at (15,0). +{ +; There are three items, all of them will call functions. +; The first and third ones are normal functions, see GEOSLib documentation for +; information about what the second function should return (it's a dynamic one). + "subitem1" MENU_ACTION smenu1 + "subitem2" MENU_ACTION|DYN_SUB_MENU smenu2 + "subitem3" MENU_ACTION smenu3 +} + +;; Format: MENU "name" left,top ALIGN { "itemname" TYPE pointer ... } + +MENU mainMenu 0,0 HORIZONTAL +; Here, we have our main menu, placed at (0,0), and it is a horizontal menu. +; Because it is a top-level menu, you would register it in your C source by +; using: DoMenu(&ero;mainMenu); +{ +; There are two items -- a submenu and an action. +; This calls a submenu named subMenu1 (see previous definition). + "first sub-menu" SUB_MENU subMenu1 +; This will work the same as an EnterDeskTop() call in C source code. + "quit" MENU_ACTION EnterDeskTop +} + +;; Format: HEADER <GEOS_TYPE> "dosname" "classname" "version" + +HEADER APPLICATION "MyFirstApp" "Class Name" "V1.0" +; This is a header for an APPLICATION which will be seen in the directory as a +; file named MyFirstApp with the Class-string "Class Name V1.0" +{ +; Not all fields are required, default and current values will be used. + author "Maciej Witkowiak" ; always in quotes! + info "Information text" ; always in quotes! +; date yy mm dd hh ss ; always 5 fields! +; dostype seq ; can be: PRG, SEQ, USR (only all UPPER- or lower-case) +; structure seq ; can be: SEQ, VLIR (only UPPER- or lower-case) + mode c64only ; can be: any, 40only, 80only, c64only +}</verb></tscreen> +</article> -- 2.39.5