From 92164216a7383907a38212fd3ca95dc7546ce49f Mon Sep 17 00:00:00 2001 From: Mario Six Date: Mon, 15 Jan 2018 11:08:11 +0100 Subject: [PATCH] i2c: ihs_i2c: Make DM compatible Make the ihs_i2c driver DM-compatible; for legacy boards, the old functions are retained within #ifdefs. No board uses the new DM driver yet; this patch only lays the foundation for future support. Signed-off-by: Mario Six --- drivers/i2c/Kconfig | 6 ++ drivers/i2c/ihs_i2c.c | 196 +++++++++++++++++++++++++++++++++++++++++- 2 files changed, 199 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 17d21bbc42..7dbec775df 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -268,6 +268,12 @@ config SYS_I2C_BUS_MAX help Define the maximum number of available I2C buses. +config SYS_I2C_IHS + bool "gdsys IHS I2C driver" + depends on DM_I2C + help + Support for gdsys IHS I2C driver on FPGA bus. + source "drivers/i2c/muxes/Kconfig" endmenu diff --git a/drivers/i2c/ihs_i2c.c b/drivers/i2c/ihs_i2c.c index 6fd016339c..b24afa472b 100644 --- a/drivers/i2c/ihs_i2c.c +++ b/drivers/i2c/ihs_i2c.c @@ -3,19 +3,39 @@ * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de * * SPDX-License-Identifier: GPL-2.0+ - * - * NOTE: This driver should be converted to driver model before June 2017. - * Please see doc/driver-model/i2c-howto.txt for instructions. */ #include #include +#ifdef CONFIG_DM_I2C +#include +#include +#include "../misc/gdsys_soc.h" +#else #include +#endif #include +#ifdef CONFIG_DM_I2C +struct ihs_i2c_priv { + uint speed; + phys_addr_t addr; +}; + +enum { + REG_INTERRUPT_STATUS = 0x00, + REG_INTERRUPT_ENABLE_CONTROL = 0x02, + REG_WRITE_MAILBOX_EXT = 0x04, + REG_WRITE_MAILBOX = 0x06, + REG_READ_MAILBOX_EXT = 0x08, + REG_READ_MAILBOX = 0x0A, +}; + +#else /* !CONFIG_DM_I2C */ DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_SYS_I2C_IHS_DUAL + #define I2C_SET_REG(fld, val) \ do { \ if (I2C_ADAP_HWNR & 0x10) \ @@ -40,6 +60,7 @@ DECLARE_GLOBAL_DATA_PTR; #define I2C_GET_REG(fld, val) \ FPGA_GET_REG(I2C_ADAP_HWNR, i2c0.fld, val) #endif +#endif /* CONFIG_DM_I2C */ enum { I2CINT_ERROR_EV = BIT(13), @@ -62,33 +83,68 @@ enum { I2COP_READ = 1, }; +#ifdef CONFIG_DM_I2C +static int wait_for_int(struct udevice *dev, int read) +#else static int wait_for_int(bool read) +#endif { u16 val; uint ctr = 0; +#ifdef CONFIG_DM_I2C + struct ihs_i2c_priv *priv = dev_get_priv(dev); + struct udevice *fpga; + gdsys_soc_get_fpga(dev, &fpga); +#endif + +#ifdef CONFIG_DM_I2C + fpgamap_read16(fpga, priv->addr + REG_INTERRUPT_STATUS, &val); +#else I2C_GET_REG(interrupt_status, &val); +#endif /* Wait until error or receive/transmit interrupt was raised */ while (!(val & (I2CINT_ERROR_EV | (read ? I2CINT_RECEIVE_EV : I2CINT_TRANSMIT_EV)))) { udelay(10); if (ctr++ > 5000) return 1; +#ifdef CONFIG_DM_I2C + fpgamap_read16(fpga, priv->addr + REG_INTERRUPT_STATUS, &val); +#else I2C_GET_REG(interrupt_status, &val); +#endif } return (val & I2CINT_ERROR_EV) ? 1 : 0; } +#ifdef CONFIG_DM_I2C +static int ihs_i2c_transfer(struct udevice *dev, uchar chip, + uchar *buffer, int len, int read, bool is_last) +#else static int ihs_i2c_transfer(uchar chip, uchar *buffer, int len, bool read, bool is_last) +#endif { u16 val; +#ifdef CONFIG_DM_I2C + struct ihs_i2c_priv *priv = dev_get_priv(dev); + struct udevice *fpga; + + gdsys_soc_get_fpga(dev, &fpga); +#endif /* Clear interrupt status */ +#ifdef CONFIG_DM_I2C + fpgamap_write16(fpga, priv->addr + REG_INTERRUPT_STATUS, + I2CINT_ERROR_EV | I2CINT_RECEIVE_EV | I2CINT_TRANSMIT_EV); + fpgamap_read16(fpga, priv->addr + REG_INTERRUPT_STATUS, &val); +#else I2C_SET_REG(interrupt_status, I2CINT_ERROR_EV | I2CINT_RECEIVE_EV | I2CINT_TRANSMIT_EV); I2C_GET_REG(interrupt_status, &val); +#endif /* If we want to write and have data, write the bytes to the mailbox */ if (!read && len) { @@ -96,22 +152,43 @@ static int ihs_i2c_transfer(uchar chip, uchar *buffer, int len, bool read, if (len > 1) val |= buffer[1] << 8; +#ifdef CONFIG_DM_I2C + fpgamap_write16(fpga, priv->addr + REG_WRITE_MAILBOX_EXT, val); +#else I2C_SET_REG(write_mailbox_ext, val); +#endif } +#ifdef CONFIG_DM_I2C + fpgamap_write16(fpga, priv->addr + REG_WRITE_MAILBOX, + I2CMB_NATIVE + | (read ? I2CMB_READ : I2CMB_WRITE) + | (chip << 1) + | ((len > 1) ? I2CMB_2BYTE : I2CMB_1BYTE) + | (!is_last ? I2CMB_HOLD_BUS : I2CMB_DONT_HOLD_BUS)); +#else I2C_SET_REG(write_mailbox, I2CMB_NATIVE | (read ? 0 : I2CMB_WRITE) | (chip << 1) | ((len > 1) ? I2CMB_2BYTE : 0) | (is_last ? 0 : I2CMB_HOLD_BUS)); +#endif +#ifdef CONFIG_DM_I2C + if (wait_for_int(dev, read)) +#else if (wait_for_int(read)) +#endif return 1; /* If we want to read, get the bytes from the mailbox */ if (read) { +#ifdef CONFIG_DM_I2C + fpgamap_read16(fpga, priv->addr + REG_READ_MAILBOX_EXT, &val); +#else I2C_GET_REG(read_mailbox_ext, &val); +#endif buffer[0] = val & 0xff; if (len > 1) buffer[1] = val >> 8; @@ -120,15 +197,25 @@ static int ihs_i2c_transfer(uchar chip, uchar *buffer, int len, bool read, return 0; } +#ifdef CONFIG_DM_I2C +static int ihs_i2c_address(struct udevice *dev, uchar chip, u8 *addr, int alen, bool hold_bus) +#else static int ihs_i2c_address(uchar chip, u8 *addr, int alen, bool hold_bus) +#endif { while (alen) { int transfer = min(alen, 2); bool is_last = alen <= transfer; +#ifdef CONFIG_DM_I2C + if (ihs_i2c_transfer(dev, chip, addr, transfer, I2COP_WRITE, + hold_bus ? false : is_last)) + return 1; +#else if (ihs_i2c_transfer(chip, addr, transfer, I2COP_WRITE, hold_bus ? false : is_last)) return 1; +#endif alen -= transfer; } @@ -136,20 +223,36 @@ static int ihs_i2c_address(uchar chip, u8 *addr, int alen, bool hold_bus) return 0; } +#ifdef CONFIG_DM_I2C +static int ihs_i2c_access(struct udevice *dev, uchar chip, u8 *addr, + int alen, uchar *buffer, int len, int read) +#else static int ihs_i2c_access(struct i2c_adapter *adap, uchar chip, u8 *addr, int alen, uchar *buffer, int len, int read) +#endif { /* Don't hold the bus if length of data to send/receive is zero */ +#ifdef CONFIG_DM_I2C + if (len <= 0 || ihs_i2c_address(dev, chip, addr, alen, len)) + return 1; +#else if (len <= 0 || ihs_i2c_address(chip, addr, alen, len)) return 1; +#endif while (len) { int transfer = min(len, 2); bool is_last = len <= transfer; +#ifdef CONFIG_DM_I2C + if (ihs_i2c_transfer(dev, chip, buffer, transfer, read, + is_last)) + return 2; +#else if (ihs_i2c_transfer(chip, buffer, transfer, read, is_last)) return 2; +#endif buffer += transfer; len -= transfer; @@ -158,6 +261,92 @@ static int ihs_i2c_access(struct i2c_adapter *adap, uchar chip, u8 *addr, return 0; } +#ifdef CONFIG_DM_I2C + +int ihs_i2c_probe(struct udevice *bus) +{ + struct ihs_i2c_priv *priv = dev_get_priv(bus); + int addr; + + addr = dev_read_u32_default(bus, "reg", -1); + + priv->addr = addr; + + return 0; +} + +static int ihs_i2c_set_bus_speed(struct udevice *bus, uint speed) +{ + struct ihs_i2c_priv *priv = dev_get_priv(bus); + + if (speed != priv->speed && priv->speed != 0) + return 1; + + priv->speed = speed; + + return 0; +} + +static int ihs_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs) +{ + struct i2c_msg *dmsg, *omsg, dummy; + + memset(&dummy, 0, sizeof(struct i2c_msg)); + + /* We expect either two messages (one with an offset and one with the + * actucal data) or one message (just data) + */ + if (nmsgs > 2 || nmsgs == 0) { + debug("%s: Only one or two messages are supported.", __func__); + return -1; + } + + omsg = nmsgs == 1 ? &dummy : msg; + dmsg = nmsgs == 1 ? msg : msg + 1; + + if (dmsg->flags & I2C_M_RD) + return ihs_i2c_access(bus, dmsg->addr, omsg->buf, + omsg->len, dmsg->buf, dmsg->len, + I2COP_READ); + else + return ihs_i2c_access(bus, dmsg->addr, omsg->buf, + omsg->len, dmsg->buf, dmsg->len, + I2COP_WRITE); +} + +static int ihs_i2c_probe_chip(struct udevice *bus, u32 chip_addr, + u32 chip_flags) +{ + uchar buffer[2]; + + if (ihs_i2c_transfer(bus, chip_addr, buffer, 0, I2COP_READ, true)) + return 1; + + return 0; +} + +static const struct dm_i2c_ops ihs_i2c_ops = { + .xfer = ihs_i2c_xfer, + .probe_chip = ihs_i2c_probe_chip, + .set_bus_speed = ihs_i2c_set_bus_speed, +}; + +static const struct udevice_id ihs_i2c_ids[] = { + { .compatible = "gdsys,ihs_i2cmaster", }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(i2c_ihs) = { + .name = "i2c_ihs", + .id = UCLASS_I2C, + .of_match = ihs_i2c_ids, + .probe = ihs_i2c_probe, + .priv_auto_alloc_size = sizeof(struct ihs_i2c_priv), + .ops = &ihs_i2c_ops, +}; + +#else /* CONFIG_DM_I2C */ + static void ihs_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr) { #ifdef CONFIG_SYS_I2C_INIT_BOARD @@ -269,3 +458,4 @@ U_BOOT_I2C_ADAP_COMPLETE(ihs3_1, ihs_i2c_init, ihs_i2c_probe, CONFIG_SYS_I2C_IHS_SLAVE_3_1, 19) #endif #endif +#endif /* CONFIG_DM_I2C */ -- 2.39.5