From 9248a78f40d622c9d1d21dbbe29db418a6be99ae Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 28 Nov 2014 15:19:32 +0900 Subject: [PATCH] ARM: UniPhier: remove Denali NAND controller fixup code This ugly work-around code is unnecessary since commit f09eb52b3ffc (mtd: denali: set some registers after nand_scan_ident()). Signed-off-by: Masahiro Yamada --- arch/arm/cpu/armv7/uniphier/board_late_init.c | 38 ------------------- 1 file changed, 38 deletions(-) diff --git a/arch/arm/cpu/armv7/uniphier/board_late_init.c b/arch/arm/cpu/armv7/uniphier/board_late_init.c index 37300206f6..0622a1e16e 100644 --- a/arch/arm/cpu/armv7/uniphier/board_late_init.c +++ b/arch/arm/cpu/armv7/uniphier/board_late_init.c @@ -26,42 +26,6 @@ static void nand_denali_wp_disable(void) #endif } -static void nand_denali_fixup(void) -{ -#if defined(CONFIG_NAND_DENALI) && \ - (defined(CONFIG_MACH_PH1_SLD8) || defined(CONFIG_MACH_PH1_PRO4)) - /* - * The Denali NAND controller on some of UniPhier SoCs does not - * automatically query the device parameters. For those SoCs, - * some registers must be set after the device is probed. - */ - void __iomem *denali_reg = (void __iomem *)CONFIG_SYS_NAND_REGS_BASE; - struct mtd_info *mtd; - struct nand_chip *chip; - - if (nand_curr_device < 0 || - nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE) { - /* NAND was not detected. Just return. */ - return; - } - - mtd = &nand_info[nand_curr_device]; - chip = mtd->priv; - - writel(mtd->erasesize / mtd->writesize, denali_reg + PAGES_PER_BLOCK); - writel(0, denali_reg + DEVICE_WIDTH); - writel(mtd->writesize, denali_reg + DEVICE_MAIN_AREA_SIZE); - writel(mtd->oobsize, denali_reg + DEVICE_SPARE_AREA_SIZE); - writel(1, denali_reg + DEVICES_CONNECTED); - - /* - * chip->scan_bbt in nand_scan_tail() has been skipped. - * It should be done in here. - */ - chip->scan_bbt(mtd); -#endif -} - int board_late_init(void) { puts("MODE: "); @@ -70,7 +34,6 @@ int board_late_init(void) case BOOT_DEVICE_MMC1: printf("eMMC Boot\n"); setenv("bootmode", "emmcboot"); - nand_denali_fixup(); break; case BOOT_DEVICE_NAND: printf("NAND Boot\n"); @@ -80,7 +43,6 @@ int board_late_init(void) case BOOT_DEVICE_NOR: printf("NOR Boot\n"); setenv("bootmode", "norboot"); - nand_denali_fixup(); break; default: printf("Unsupported Boot Mode\n"); -- 2.39.5