From 92a16c81f5c5b43779520dbc7278f3d7cfb24684 Mon Sep 17 00:00:00 2001 From: Hao Zhang Date: Wed, 22 Oct 2014 17:18:23 +0300 Subject: [PATCH] soc: keystone_serdes: generalize to be used by other sub systems SerDes driver is used by other sub systems like PCI, sRIO etc. So modify it to be more general. The SerDes driver provides common API's that can also be extended for other peripherals SerDes configurations. Signed-off-by: Hao Zhang Signed-off-by: Ivan Khoronzhuk --- .../include/asm/ti-common/keystone_serdes.h | 42 +++++- drivers/net/keystone_net.c | 15 +- drivers/soc/keystone/keystone_serdes.c | 131 +++++++++++++----- include/configs/ks2_evm.h | 10 +- 4 files changed, 156 insertions(+), 42 deletions(-) diff --git a/arch/arm/include/asm/ti-common/keystone_serdes.h b/arch/arm/include/asm/ti-common/keystone_serdes.h index 2e12b05d05..2e92411404 100644 --- a/arch/arm/include/asm/ti-common/keystone_serdes.h +++ b/arch/arm/include/asm/ti-common/keystone_serdes.h @@ -10,6 +10,46 @@ #ifndef __TI_KEYSTONE_SERDES_H__ #define __TI_KEYSTONE_SERDES_H__ -void ks2_serdes_sgmii_156p25mhz_setup(void); +/* SERDES Reference clock */ +enum ks2_serdes_clock { + SERDES_CLOCK_100M, /* 100 MHz */ + SERDES_CLOCK_122P88M, /* 122.88 MHz */ + SERDES_CLOCK_125M, /* 125 MHz */ + SERDES_CLOCK_156P25M, /* 156.25 MHz */ + SERDES_CLOCK_312P5M, /* 312.5 MHz */ +}; + +/* SERDES Lane Baud Rate */ +enum ks2_serdes_rate { + SERDES_RATE_4P9152G, /* 4.9152 GBaud */ + SERDES_RATE_5G, /* 5 GBaud */ + SERDES_RATE_6P144G, /* 6.144 GBaud */ + SERDES_RATE_6P25G, /* 6.25 GBaud */ + SERDES_RATE_10p3125g, /* 10.3215 GBaud */ + SERDES_RATE_12p5g, /* 12.5 GBaud */ +}; + +/* SERDES Lane Rate Mode */ +enum ks2_serdes_rate_mode { + SERDES_FULL_RATE, + SERDES_HALF_RATE, + SERDES_QUARTER_RATE, +}; + +/* SERDES PHY TYPE */ +enum ks2_serdes_interface { + SERDES_PHY_SGMII, + SERDES_PHY_PCSR, /* XGE SERDES */ +}; + +struct ks2_serdes { + enum ks2_serdes_clock clk; + enum ks2_serdes_rate rate; + enum ks2_serdes_rate_mode rate_mode; + enum ks2_serdes_interface intf; + u32 loopback; +}; + +int ks2_serdes_init(u32 base, struct ks2_serdes *serdes, u32 num_lanes); #endif /* __TI_KEYSTONE_SERDES_H__ */ diff --git a/drivers/net/keystone_net.c b/drivers/net/keystone_net.c index 63f33611cb..8a45fbd88f 100644 --- a/drivers/net/keystone_net.c +++ b/drivers/net/keystone_net.c @@ -554,7 +554,20 @@ int keystone2_emac_initialize(struct eth_priv_t *eth_priv) return 0; } +struct ks2_serdes ks2_serdes_sgmii_156p25mhz = { + .clk = SERDES_CLOCK_156P25M, + .rate = SERDES_RATE_5G, + .rate_mode = SERDES_QUARTER_RATE, + .intf = SERDES_PHY_SGMII, + .loopback = 0, +}; + static void keystone2_net_serdes_setup(void) { - ks2_serdes_sgmii_156p25mhz_setup(); + ks2_serdes_init(CONFIG_KSNET_SERDES_SGMII_BASE, + &ks2_serdes_sgmii_156p25mhz, + CONFIG_KSNET_SERDES_LANES_PER_SGMII); + + /* wait till setup */ + udelay(5000); } diff --git a/drivers/soc/keystone/keystone_serdes.c b/drivers/soc/keystone/keystone_serdes.c index 3632c22be2..84ed9ba4e8 100644 --- a/drivers/soc/keystone/keystone_serdes.c +++ b/drivers/soc/keystone/keystone_serdes.c @@ -7,9 +7,27 @@ * SPDX-License-Identifier: GPL-2.0+ */ +#include #include +#include +#define SERDES_CMU_REGS(x) (0x0000 + (0x0c00 * (x))) #define SERDES_LANE_REGS(x) (0x0200 + (0x200 * (x))) +#define SERDES_COMLANE_REGS 0x0a00 +#define SERDES_WIZ_REGS 0x1fc0 + +#define SERDES_CMU_REG_000(x) (SERDES_CMU_REGS(x) + 0x000) +#define SERDES_CMU_REG_010(x) (SERDES_CMU_REGS(x) + 0x010) +#define SERDES_COMLANE_REG_000 (SERDES_COMLANE_REGS + 0x000) +#define SERDES_LANE_REG_000(x) (SERDES_LANE_REGS(x) + 0x000) +#define SERDES_LANE_REG_028(x) (SERDES_LANE_REGS(x) + 0x028) +#define SERDES_LANE_CTL_STATUS_REG(x) (SERDES_WIZ_REGS + 0x0020 + (4 * (x))) +#define SERDES_PLL_CTL_REG (SERDES_WIZ_REGS + 0x0034) + +#define SERDES_RESET BIT(28) +#define SERDES_LANE_RESET BIT(29) +#define SERDES_LANE_LOOPBACK BIT(30) +#define SERDES_LANE_EN_VAL(x, y, z) (x[y] | (z << 26) | (z << 10)) struct serdes_cfg { u32 ofs; @@ -17,6 +35,18 @@ struct serdes_cfg { u32 mask; }; +/* SERDES PHY lane enable configuration value, indexed by PHY interface */ +static u32 serdes_cfg_lane_enable[] = { + 0xf000f0c0, /* SGMII */ + 0xf0e9f038, /* PCSR */ +}; + +/* SERDES PHY PLL enable configuration value, indexed by PHY interface */ +static u32 serdes_cfg_pll_enable[] = { + 0xe0000000, /* SGMII */ + 0xee000000, /* PCSR */ +}; + static struct serdes_cfg cfg_cmu_156p25m_5g[] = { {0x0000, 0x00800000, 0xffff0000}, {0x0014, 0x00008282, 0x0000ffff}, @@ -91,39 +121,72 @@ static int ks2_serdes_init_156p25m_5g(u32 base, u32 num_lanes) return 0; } -void ks2_serdes_sgmii_156p25mhz_setup(void) +static void ks2_serdes_cmu_comlane_enable(u32 base, struct ks2_serdes *serdes) +{ + /* Bring SerDes out of Reset */ + ks2_serdes_rmw(base + SERDES_CMU_REG_010(0), 0x0, SERDES_RESET); + if (serdes->intf == SERDES_PHY_PCSR) + ks2_serdes_rmw(base + SERDES_CMU_REG_010(1), 0x0, SERDES_RESET); + + /* Enable CMU and COMLANE */ + ks2_serdes_rmw(base + SERDES_CMU_REG_000(0), 0x03, 0x000000ff); + if (serdes->intf == SERDES_PHY_PCSR) + ks2_serdes_rmw(base + SERDES_CMU_REG_000(1), 0x03, 0x000000ff); + + ks2_serdes_rmw(base + SERDES_COMLANE_REG_000, 0x5f, 0x000000ff); +} + +static void ks2_serdes_pll_enable(u32 base, struct ks2_serdes *serdes) +{ + writel(serdes_cfg_pll_enable[serdes->intf], + base + SERDES_PLL_CTL_REG); +} + +static void ks2_serdes_lane_reset(u32 base, u32 reset, u32 lane) { - unsigned int cnt; - - ks2_serdes_init_156p25m_5g(CONFIG_KS2_SERDES_SGMII_BASE, - CONFIG_KS2_SERDES_LANES_PER_SGMII); - - /*Bring SerDes out of Reset if SerDes is Shutdown & is in Reset Mode*/ - clrbits_le32(0x0232a010, 1 << 28); - - /* Enable TX and RX via the LANExCTL_STS 0x0000 + x*4 */ - clrbits_le32(0x0232a228, 1 << 29); - writel(0xF800F8C0, 0x0232bfe0); - clrbits_le32(0x0232a428, 1 << 29); - writel(0xF800F8C0, 0x0232bfe4); - clrbits_le32(0x0232a628, 1 << 29); - writel(0xF800F8C0, 0x0232bfe8); - clrbits_le32(0x0232a828, 1 << 29); - writel(0xF800F8C0, 0x0232bfec); - - /*Enable pll via the pll_ctrl 0x0014*/ - writel(0xe0000000, 0x0232bff4) - ; - - /*Waiting for SGMII Serdes PLL lock.*/ - for (cnt = 10000; cnt > 0 && ((readl(0x02090114) & 0x10) == 0); cnt--) - ; - for (cnt = 10000; cnt > 0 && ((readl(0x02090214) & 0x10) == 0); cnt--) - ; - for (cnt = 10000; cnt > 0 && ((readl(0x02090414) & 0x10) == 0); cnt--) - ; - for (cnt = 10000; cnt > 0 && ((readl(0x02090514) & 0x10) == 0); cnt--) - ; - - udelay(45000); + if (reset) + ks2_serdes_rmw(base + SERDES_LANE_REG_028(lane), + 0x1, SERDES_LANE_RESET); + else + ks2_serdes_rmw(base + SERDES_LANE_REG_028(lane), + 0x0, SERDES_LANE_RESET); +} + +static void ks2_serdes_lane_enable(u32 base, + struct ks2_serdes *serdes, u32 lane) +{ + /* Bring lane out of reset */ + ks2_serdes_lane_reset(base, 0, lane); + + writel(SERDES_LANE_EN_VAL(serdes_cfg_lane_enable, serdes->intf, + serdes->rate_mode), + base + SERDES_LANE_CTL_STATUS_REG(lane)); + + /* Set NES bit if Loopback Enabled */ + if (serdes->loopback) + ks2_serdes_rmw(base + SERDES_LANE_REG_000(lane), + 0x1, SERDES_LANE_LOOPBACK); +} + +int ks2_serdes_init(u32 base, struct ks2_serdes *serdes, u32 num_lanes) +{ + int i; + int ret = 0; + + /* The driver currently supports 5GBaud rate with ref clock 156.25MHz */ + if (serdes->clk == SERDES_CLOCK_156P25M) + if (serdes->rate == SERDES_RATE_5G) + ret = ks2_serdes_init_156p25m_5g(base, num_lanes); + else + return -EINVAL; + else + return -EINVAL; + + ks2_serdes_cmu_comlane_enable(base, serdes); + for (i = 0; i < num_lanes; i++) + ks2_serdes_lane_enable(base, serdes, i); + + ks2_serdes_pll_enable(base, serdes); + + return ret; } diff --git a/include/configs/ks2_evm.h b/include/configs/ks2_evm.h index 8037c3e6e2..5ba975c60c 100644 --- a/include/configs/ks2_evm.h +++ b/include/configs/ks2_evm.h @@ -134,8 +134,10 @@ #define CONFIG_KSNAV_NETCP_PDMA_TX_SND_QUEUE KS2_NETCP_PDMA_TX_SND_QUEUE /* Keystone net */ -#define CONFIG_KSNET_MAC_ID_BASE KS2_MAC_ID_BASE_ADDR -#define CONFIG_KSNET_NETCP_BASE KS2_NETCP_BASE +#define CONFIG_KSNET_MAC_ID_BASE KS2_MAC_ID_BASE_ADDR +#define CONFIG_KSNET_NETCP_BASE KS2_NETCP_BASE +#define CONFIG_KSNET_SERDES_SGMII_BASE KS2_SGMII_SERDES_BASE +#define CONFIG_KSNET_SERDES_LANES_PER_SGMII KS2_LANES_PER_SGMII_SERDES /* AEMIF */ #define CONFIG_TI_AEMIF @@ -319,8 +321,4 @@ which is NOT applicable for DDR ECC test */ #define CONFIG_MAX_UBOOT_MEM_SIZE (4 << 20) /* 4 MiB */ -/* SGMII SerDes */ -#define CONFIG_KS2_SERDES_SGMII_BASE KS2_SGMII_SERDES_BASE -#define CONFIG_KS2_SERDES_LANES_PER_SGMII KS2_LANES_PER_SGMII_SERDES - #endif /* __CONFIG_KS2_EVM_H */ -- 2.39.5