From 92b14f8ca96e87715697be74a08907595a7d4dcb Mon Sep 17 00:00:00 2001 From: Andreas Fritiofson Date: Sun, 31 Jul 2011 10:31:56 +0200 Subject: [PATCH] stm32f1x: use async algorithm in flash programming routine Let the target algorithm be running in the background and buffer data continuously through a FIFO. This reduces or removes the effect of latency because only a very small number of queue executions needs to be done per buffer fill. Previously, the many repeated target state changes, register accesses (really inefficient) and algorithm uploads caused the flash programming to be latency bound in many cases. Now it should scale better with increased throughput. Signed-off-by: Andreas Fritiofson --- .../loaders/flash/{stm32x.S => stm32f1x.S} | 71 +++--- src/flash/nor/stm32f1x.c | 210 +++++++++++++----- 2 files changed, 201 insertions(+), 80 deletions(-) rename contrib/loaders/flash/{stm32x.S => stm32f1x.S} (51%) diff --git a/contrib/loaders/flash/stm32x.S b/contrib/loaders/flash/stm32f1x.S similarity index 51% rename from contrib/loaders/flash/stm32x.S rename to contrib/loaders/flash/stm32f1x.S index 01494b86..125c76a6 100644 --- a/contrib/loaders/flash/stm32x.S +++ b/contrib/loaders/flash/stm32f1x.S @@ -1,6 +1,6 @@ /*************************************************************************** - * Copyright (C) 2010 by Spencer Oliver * - * spen@spen-soft.co.uk * + * Copyright (C) 2011 by Andreas Fritiofson * + * andreas.fritiofson@gmail.com * * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * @@ -25,34 +25,47 @@ .thumb_func .global write -/* - r0 - source address - r1 - target address - r2 - count (halfword-16bit) - r3 - sector offet in : result out - r4 - flash base -*/ + /* Params: + * r0 - flash base (in), status (out) + * r1 - count (halfword-16bit) + * r2 - workarea start + * r3 - workarea end + * r4 - target address + * Clobbered: + * r5 - rp + * r6 - wp, tmp + */ -#define STM32_FLASH_CR_OFFSET 0x10 /* offset of CR register in FLASH struct */ -#define STM32_FLASH_SR_OFFSET 0x0c /* offset of CR register in FLASH struct */ +#define STM32_FLASH_CR_OFFSET 0x10 /* offset of CR register from flash reg base */ +#define STM32_FLASH_SR_OFFSET 0x0c /* offset of SR register from flash reg base */ -write: - ldr r4, STM32_FLASH_BASE - add r4, r3 /* add offset 0x00 for sector 0 : 0x40 for sector 1 */ -write_half_word: - movs r3, #0x01 - str r3, [r4, #STM32_FLASH_CR_OFFSET] /* PG (bit0) == 1 => flash programming enabled */ - ldrh r3, [r0], #0x02 /* read one half-word from src, increment ptr */ - strh r3, [r1], #0x02 /* write one half-word from src, increment ptr */ +wait_fifo: + ldr r6, [r2, #0] /* read wp */ + cmp r6, #0 /* abort if wp == 0 */ + beq exit + ldr r5, [r2, #4] /* read rp */ + cmp r5, r6 /* wait until rp != wp */ + beq wait_fifo + movs r6, #1 /* set PG flag to enable flash programming */ + str r6, [r0, #STM32_FLASH_CR_OFFSET] + ldrh r6, [r5], #2 /* "*target_address++ = *rp++" */ + strh r6, [r4], #2 busy: - ldr r3, [r4, #STM32_FLASH_SR_OFFSET] - tst r3, #0x01 /* BSY (bit0) == 1 => operation in progress */ - beq busy /* wait more... */ - tst r3, #0x14 /* PGERR (bit2) == 1 or WRPRTERR (bit4) == 1 => error */ - bne exit /* fail... */ - subs r2, r2, #0x01 /* decrement counter */ - bne write_half_word /* write next half-word if anything left */ + ldr r6, [r0, #STM32_FLASH_SR_OFFSET] /* wait until BSY flag is reset */ + tst r6, #1 + bne busy + tst r6, #0x14 /* check the error bits */ + bne error + cmp r5, r3 /* wrap rp at end of buffer */ + it cs + addcs r5, r2, #8 + str r5, [r2, #4] /* store rp */ + subs r1, r1, #1 /* decrement halfword count */ + cbz r1, exit /* loop if not done */ + b wait_fifo +error: + movs r0, #0 + str r0, [r2, #2] /* set rp = 0 on error */ exit: - bkpt #0x00 - -STM32_FLASH_BASE: .word 0x40022000 /* base address of FLASH struct */ + mov r0, r6 /* return status in r0 */ + bkpt #0 diff --git a/src/flash/nor/stm32f1x.c b/src/flash/nor/stm32f1x.c index 142b03e8..a0520c79 100644 --- a/src/flash/nor/stm32f1x.c +++ b/src/flash/nor/stm32f1x.c @@ -5,6 +5,9 @@ * Copyright (C) 2008 by Spencer Oliver * * spen@spen-soft.co.uk * * * + * Copyright (C) 2011 by Andreas Fritiofson * + * andreas.fritiofson@gmail.com * + * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * @@ -623,34 +626,45 @@ static int stm32x_write_block(struct flash_bank *bank, uint8_t *buffer, uint32_t buffer_size = 16384; struct working_area *source; uint32_t address = bank->base + offset; - struct reg_param reg_params[4]; + struct reg_param reg_params[5]; struct armv7m_algorithm armv7m_info; int retval = ERROR_OK; - /* see contib/loaders/flash/stm32x.s for src */ + /* see contrib/loaders/flash/stm32f1x.S for src */ static const uint8_t stm32x_flash_write_code[] = { - /* #define STM32_FLASH_CR_OFFSET 0x10 */ - /* #define STM32_FLASH_SR_OFFSET 0x0C */ - /* write: */ - 0x08, 0x4c, /* ldr r4, STM32_FLASH_BASE */ - 0x1c, 0x44, /* add r4, r3 */ - /* write_half_word: */ - 0x01, 0x23, /* movs r3, #0x01 */ - 0x23, 0x61, /* str r3, [r4, #STM32_FLASH_CR_OFFSET] */ - 0x30, 0xf8, 0x02, 0x3b, /* ldrh r3, [r0], #0x02 */ - 0x21, 0xf8, 0x02, 0x3b, /* strh r3, [r1], #0x02 */ - /* busy: */ - 0xe3, 0x68, /* ldr r3, [r4, #STM32_FLASH_SR_OFFSET] */ - 0x13, 0xf0, 0x01, 0x0f, /* tst r3, #0x01 */ - 0xfb, 0xd0, /* beq busy */ - 0x13, 0xf0, 0x14, 0x0f, /* tst r3, #0x14 */ - 0x01, 0xd1, /* bne exit */ - 0x01, 0x3a, /* subs r2, r2, #0x01 */ - 0xf0, 0xd1, /* bne write_half_word */ - /* exit: */ - 0x00, 0xbe, /* bkpt #0x00 */ - 0x00, 0x20, 0x02, 0x40, /* STM32_FLASH_BASE: .word 0x40022000 */ + /* #define STM32_FLASH_CR_OFFSET 0x10 */ + /* #define STM32_FLASH_SR_OFFSET 0x0C */ + /* wait_fifo: */ + 0x16, 0x68, /* ldr r6, [r2, #0] */ + 0x00, 0x2e, /* cmp r6, #0 */ + 0x1a, 0xd0, /* beq exit */ + 0x55, 0x68, /* ldr r5, [r2, #4] */ + 0xb5, 0x42, /* cmp r5, r6 */ + 0xf9, 0xd0, /* beq wait_fifo */ + 0x01, 0x26, /* movs r6, #1 */ + 0x06, 0x61, /* str r6, [r0, #STM32_FLASH_CR_OFFSET] */ + 0x35, 0xf8, 0x02, 0x6b, /* ldrh r6, [r5], #2 */ + 0x24, 0xf8, 0x02, 0x6b, /* strh r6, [r4], #2 */ + /* busy: */ + 0xc6, 0x68, /* ldr r6, [r0, #STM32_FLASH_SR_OFFSET] */ + 0x16, 0xf0, 0x01, 0x0f, /* tst r6, #1 */ + 0xfb, 0xd1, /* bne busy */ + 0x16, 0xf0, 0x14, 0x0f, /* tst r6, #0x14 */ + 0x07, 0xd1, /* bne error */ + 0x9d, 0x42, /* cmp r5, r3 */ + 0x28, 0xbf, /* it cs */ + 0x02, 0xf1, 0x08, 0x05, /* addcs r5, r2, #8 */ + 0x55, 0x60, /* str r5, [r2, #4] */ + 0x01, 0x39, /* subs r1, r1, #1 */ + 0x19, 0xb1, /* cbz r1, exit */ + 0xe4, 0xe7, /* b wait_fifo */ + /* error: */ + 0x00, 0x20, /* movs r0, #0 */ + 0xc2, 0xf8, 0x02, 0x00, /* str r0, [r2, #2] */ + /* exit: */ + 0x30, 0x46, /* mov r0, r6 */ + 0x00, 0xbe, /* bkpt #0 */ }; /* flash write code */ @@ -670,6 +684,7 @@ static int stm32x_write_block(struct flash_bank *bank, uint8_t *buffer, while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) { buffer_size /= 2; + buffer_size &= ~3UL; // Make sure it's 4 byte aligned if (buffer_size <= 256) { /* if we already allocated the writing code, but failed to get a @@ -682,60 +697,152 @@ static int stm32x_write_block(struct flash_bank *bank, uint8_t *buffer, } }; + /* Set up working area. First word is write pointer, second word is read pointer, + * rest is fifo data area. */ + uint32_t wp_addr = source->address; + uint32_t rp_addr = source->address + 4; + uint32_t fifo_start_addr = source->address + 8; + uint32_t fifo_end_addr = source->address + source->size; + + uint32_t wp = fifo_start_addr; + uint32_t rp = fifo_start_addr; + + retval = target_write_u32(target, wp_addr, wp); + if (retval != ERROR_OK) + return retval; + retval = target_write_u32(target, rp_addr, rp); + if (retval != ERROR_OK) + return retval; + + init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT); /* flash base (in), status (out) */ + init_reg_param(®_params[1], "r1", 32, PARAM_OUT); /* count (halfword-16bit) */ + init_reg_param(®_params[2], "r2", 32, PARAM_OUT); /* buffer start */ + init_reg_param(®_params[3], "r3", 32, PARAM_OUT); /* buffer end */ + init_reg_param(®_params[4], "r4", 32, PARAM_IN_OUT); /* target address */ + + buf_set_u32(reg_params[0].value, 0, 32, stm32x_info->register_base); + buf_set_u32(reg_params[1].value, 0, 32, count); + buf_set_u32(reg_params[2].value, 0, 32, source->address); + buf_set_u32(reg_params[3].value, 0, 32, source->address + source->size); + buf_set_u32(reg_params[4].value, 0, 32, address); + armv7m_info.common_magic = ARMV7M_COMMON_MAGIC; armv7m_info.core_mode = ARMV7M_MODE_ANY; - init_reg_param(®_params[0], "r0", 32, PARAM_OUT); - init_reg_param(®_params[1], "r1", 32, PARAM_OUT); - init_reg_param(®_params[2], "r2", 32, PARAM_OUT); - init_reg_param(®_params[3], "r3", 32, PARAM_IN_OUT); + /* Start up algorithm on target and let it idle while writing the first chunk */ + if ((retval = target_start_algorithm(target, 0, NULL, 5, reg_params, + stm32x_info->write_algorithm->address, + 0, + &armv7m_info)) != ERROR_OK) + { + LOG_ERROR("error starting stm32x flash write algorithm"); + goto cleanup; + } while (count > 0) { - uint32_t thisrun_count = (count > (buffer_size / 2)) ? - (buffer_size / 2) : count; - - if ((retval = target_write_buffer(target, source->address, - thisrun_count * 2, buffer)) != ERROR_OK) + retval = target_read_u32(target, rp_addr, &rp); + if (retval != ERROR_OK) + { + LOG_ERROR("failed to get read pointer"); break; + } - buf_set_u32(reg_params[0].value, 0, 32, source->address); - buf_set_u32(reg_params[1].value, 0, 32, address); - buf_set_u32(reg_params[2].value, 0, 32, thisrun_count); - buf_set_u32(reg_params[3].value, 0, 32, stm32x_info->register_base - FLASH_REG_BASE_B0); + LOG_DEBUG("count 0x%"PRIx32" wp 0x%"PRIx32" rp 0x%"PRIx32, count, wp, rp); - if ((retval = target_run_algorithm(target, 0, NULL, 4, reg_params, - stm32x_info->write_algorithm->address, - 0, - 10000, &armv7m_info)) != ERROR_OK) + if (rp == 0) { - LOG_ERROR("error executing stm32x flash write algorithm"); + LOG_ERROR("flash write algorithm aborted by target"); + retval = ERROR_FLASH_OPERATION_FAILED; break; } - if (buf_get_u32(reg_params[3].value, 0, 32) & FLASH_PGERR) + if ((rp & 1) || rp < fifo_start_addr || rp >= fifo_end_addr) + { + LOG_ERROR("corrupted fifo read pointer 0x%"PRIx32, rp); + break; + } + + /* Count the number of bytes available in the fifo without + * crossing the wrap around. Make sure to not fill it completely, + * because that would make wp == rp and that's the empty condition. */ + uint32_t thisrun_bytes; + if (rp > wp) + thisrun_bytes = rp - wp - 2; + else if (rp > fifo_start_addr) + thisrun_bytes = fifo_end_addr - wp; + else + thisrun_bytes = fifo_end_addr - wp - 2; + + if (thisrun_bytes == 0) + { + /* Throttle polling a bit if transfer is (much) faster than flash + * programming. The exact delay shouldn't matter as long as it's + * less than buffer size / flash speed. This is very unlikely to + * run when using high latency connections such as USB. */ + alive_sleep(10); + continue; + } + + /* Limit to the amount of data we actually want to write */ + if (thisrun_bytes > count * 2) + thisrun_bytes = count * 2; + + /* Write data to fifo */ + retval = target_write_buffer(target, wp, thisrun_bytes, buffer); + if (retval != ERROR_OK) + break; + + /* Update counters and wrap write pointer */ + buffer += thisrun_bytes; + count -= thisrun_bytes / 2; + wp += thisrun_bytes; + if (wp >= fifo_end_addr) + wp = fifo_start_addr; + + /* Store updated write pointer to target */ + retval = target_write_u32(target, wp_addr, wp); + if (retval != ERROR_OK) + break; + } + + if (retval != ERROR_OK) + { + /* abort flash write algorithm on target */ + target_write_u32(target, wp_addr, 0); + } + + int retval2; + if ((retval2 = target_wait_algorithm(target, 0, NULL, 5, reg_params, + 0, + 10000, + &armv7m_info)) != ERROR_OK) + { + LOG_ERROR("error waiting for stm32x flash write algorithm"); + retval = retval2; + } + + if (retval == ERROR_FLASH_OPERATION_FAILED) + { + LOG_ERROR("flash write failed at address 0x%"PRIx32, + buf_get_u32(reg_params[4].value, 0, 32)); + + if (buf_get_u32(reg_params[0].value, 0, 32) & FLASH_PGERR) { LOG_ERROR("flash memory not erased before writing"); /* Clear but report errors */ target_write_u32(target, STM32_FLASH_SR_B0, FLASH_PGERR); - retval = ERROR_FAIL; - break; } - if (buf_get_u32(reg_params[3].value, 0, 32) & FLASH_WRPRTERR) + if (buf_get_u32(reg_params[0].value, 0, 32) & FLASH_WRPRTERR) { LOG_ERROR("flash memory write protected"); /* Clear but report errors */ target_write_u32(target, STM32_FLASH_SR_B0, FLASH_WRPRTERR); - retval = ERROR_FAIL; - break; } - - buffer += thisrun_count * 2; - address += thisrun_count * 2; - count -= thisrun_count; } +cleanup: target_free_working_area(target, source); target_free_working_area(target, stm32x_info->write_algorithm); @@ -743,6 +850,7 @@ static int stm32x_write_block(struct flash_bank *bank, uint8_t *buffer, destroy_reg_param(®_params[1]); destroy_reg_param(®_params[2]); destroy_reg_param(®_params[3]); + destroy_reg_param(®_params[4]); return retval; } -- 2.39.5