From 935758b1d5e58ebd24d8570487455ba286ba4656 Mon Sep 17 00:00:00 2001 From: Siarhei Siamashka Date: Sun, 3 Aug 2014 05:32:53 +0300 Subject: [PATCH] sunxi: dram: Derive write recovery delay from DRAM clock speed The write recovery time is 15ns for all JEDEC DDR3 speed bins. And instead of hardcoding it to 10 cycles, it is possible to set tighter timings based on accurate calculations. For example, DRAM clock frequencies up to 533MHz need only 8 cycles for write recovery. Signed-off-by: Siarhei Siamashka Acked-by: Ian Campbell Signed-off-by: Hans de Goede --- arch/arm/cpu/armv7/sunxi/dram.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/arch/arm/cpu/armv7/sunxi/dram.c b/arch/arm/cpu/armv7/sunxi/dram.c index 0bbb10d5e3..2ad685b2f8 100644 --- a/arch/arm/cpu/armv7/sunxi/dram.c +++ b/arch/arm/cpu/armv7/sunxi/dram.c @@ -451,6 +451,21 @@ static void dramc_set_autorefresh_cycle(u32 clk, u32 density) writel(DRAM_DRR_TREFI(tREFI) | DRAM_DRR_TRFC(tRFC), &dram->drr); } +/* Calculate the value for A11, A10, A9 bits in MR0 (write recovery) */ +static u32 ddr3_write_recovery(u32 clk) +{ + u32 twr_ns = 15; /* DDR3 spec says that it is 15ns for all speed bins */ + u32 twr_ck = (twr_ns * clk + 999) / 1000; + if (twr_ck < 5) + return 1; + else if (twr_ck <= 8) + return twr_ck - 4; + else if (twr_ck <= 10) + return 5; + else + return 6; +} + /* * If the dram->ppwrsctl (SDR_DPCR) register has the lowest bit set to 1, this * means that DRAM is currently in self-refresh mode and retaining the old @@ -647,7 +662,7 @@ unsigned long dramc_init(struct dram_para *para) reg_val |= DRAM_MR_POWER_DOWN; #endif reg_val |= DRAM_MR_CAS_LAT(para->cas - 4); - reg_val |= DRAM_MR_WRITE_RECOVERY(0x5); + reg_val |= DRAM_MR_WRITE_RECOVERY(ddr3_write_recovery(para->clock)); writel(reg_val, &dram->mr); writel(para->emr1, &dram->emr); -- 2.39.5