From 938076efa99be181eb3e8e64eee5c298d24663c5 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 17 Aug 2016 09:46:22 -0300 Subject: [PATCH] pico-imx6ul: Directly write to register LDOGCTL Register LDOGCTL contains only bit 0 as a valid bit, so there is no need to do a read-modify-write operation. Simplify the code by writing directly to this register. Signed-off-by: Fabio Estevam --- board/technexion/pico-imx6ul/pico-imx6ul.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/board/technexion/pico-imx6ul/pico-imx6ul.c b/board/technexion/pico-imx6ul/pico-imx6ul.c index 5cbf803e7e..49aeb80327 100644 --- a/board/technexion/pico-imx6ul/pico-imx6ul.c +++ b/board/technexion/pico-imx6ul/pico-imx6ul.c @@ -231,9 +231,7 @@ int power_init_board(void) printf("PMIC: PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", reg, rev_id); /* disable Low Power Mode during standby mode */ - pmic_reg_read(pfuze, PFUZE3000_LDOGCTL, ®); - reg |= 0x1; - pmic_reg_write(pfuze, PFUZE3000_LDOGCTL, reg); + pmic_reg_write(pfuze, PFUZE3000_LDOGCTL, 0x1); /* SW1B step ramp up time from 2us to 4us/25mV */ pmic_reg_write(pfuze, PFUZE3000_SW1BCONF, 0x40); -- 2.39.5