From 951860634fdb557bbb58e0f99215391bc0c29779 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 8 Aug 2014 07:41:39 -0700 Subject: [PATCH] e1000: add i210 support Add i210 support to the e1000 driver. Signed-off-by: Marek Vasut Acked-by: Tim Harvey --- drivers/net/e1000.c | 195 ++++++++++++++++++++++++++++++++++++++------ drivers/net/e1000.h | 12 +++ include/pci_ids.h | 7 ++ 3 files changed, 187 insertions(+), 27 deletions(-) diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index 0441a4f888..0eba57cf0c 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -92,6 +92,12 @@ static struct pci_device_id e1000_supported[] = { {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80003ES2LAN_SERDES_DPT}, {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80003ES2LAN_COPPER_SPT}, {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80003ES2LAN_SERDES_SPT}, + {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_I210_COPPER}, + {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_I210_COPPER_FLASHLESS}, + {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_I210_SERDES}, + {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_I210_SERDES_FLASHLESS}, + {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_I210_1000BASEKX}, + {} }; @@ -340,7 +346,7 @@ int32_t e1000_acquire_eeprom(struct e1000_hw *hw) return -E1000_ERR_SWFW_SYNC; eecd = E1000_READ_REG(hw, EECD); - if (hw->mac_type != e1000_82573 || hw->mac_type != e1000_82574) { + if (hw->mac_type != e1000_82573 && hw->mac_type != e1000_82574) { /* Request EEPROM Access */ if (hw->mac_type > e1000_82544) { eecd |= E1000_EECD_REQ; @@ -391,10 +397,15 @@ int32_t e1000_acquire_eeprom(struct e1000_hw *hw) static int32_t e1000_init_eeprom_params(struct e1000_hw *hw) { struct e1000_eeprom_info *eeprom = &hw->eeprom; - uint32_t eecd = E1000_READ_REG(hw, EECD); + uint32_t eecd; int32_t ret_val = E1000_SUCCESS; uint16_t eeprom_size; + if (hw->mac_type == e1000_igb) + eecd = E1000_READ_REG(hw, I210_EECD); + else + eecd = E1000_READ_REG(hw, EECD); + DEBUGFUNC(); switch (hw->mac_type) { @@ -485,9 +496,10 @@ static int32_t e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->page_size = 8; eeprom->address_bits = 8; } - eeprom->use_eerd = true; - eeprom->use_eewr = true; if (e1000_is_onboard_nvm_eeprom(hw) == false) { + eeprom->use_eerd = true; + eeprom->use_eewr = true; + eeprom->type = e1000_eeprom_flash; eeprom->word_size = 2048; @@ -511,6 +523,16 @@ static int32_t e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->use_eerd = true; eeprom->use_eewr = false; break; + case e1000_igb: + /* i210 has 4k of iNVM mapped as EEPROM */ + eeprom->type = e1000_eeprom_invm; + eeprom->opcode_bits = 8; + eeprom->delay_usec = 1; + eeprom->page_size = 32; + eeprom->address_bits = 16; + eeprom->use_eerd = true; + eeprom->use_eewr = false; + break; /* ich8lan does not support currently. if needed, please * add corresponding code and functions. @@ -552,7 +574,8 @@ static int32_t e1000_init_eeprom_params(struct e1000_hw *hw) break; } - if (eeprom->type == e1000_eeprom_spi) { + if (eeprom->type == e1000_eeprom_spi || + eeprom->type == e1000_eeprom_invm) { /* eeprom_size will be an enum [0..8] that maps * to eeprom sizes 128B to * 32KB (incremented by powers of 2). @@ -596,10 +619,17 @@ e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd) int32_t done = E1000_ERR_EEPROM; for (i = 0; i < attempts; i++) { - if (eerd == E1000_EEPROM_POLL_READ) - reg = E1000_READ_REG(hw, EERD); - else - reg = E1000_READ_REG(hw, EEWR); + if (eerd == E1000_EEPROM_POLL_READ) { + if (hw->mac_type == e1000_igb) + reg = E1000_READ_REG(hw, I210_EERD); + else + reg = E1000_READ_REG(hw, EERD); + } else { + if (hw->mac_type == e1000_igb) + reg = E1000_READ_REG(hw, I210_EEWR); + else + reg = E1000_READ_REG(hw, EEWR); + } if (reg & E1000_EEPROM_RW_REG_DONE) { done = E1000_SUCCESS; @@ -632,13 +662,23 @@ e1000_read_eeprom_eerd(struct e1000_hw *hw, eerd = ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) + E1000_EEPROM_RW_REG_START; - E1000_WRITE_REG(hw, EERD, eerd); + if (hw->mac_type == e1000_igb) + E1000_WRITE_REG(hw, I210_EERD, eerd); + else + E1000_WRITE_REG(hw, EERD, eerd); + error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_READ); if (error) break; - data[i] = (E1000_READ_REG(hw, EERD) >> + + if (hw->mac_type == e1000_igb) { + data[i] = (E1000_READ_REG(hw, I210_EERD) >> + E1000_EEPROM_RW_REG_DATA); + } else { + data[i] = (E1000_READ_REG(hw, EERD) >> E1000_EEPROM_RW_REG_DATA); + } } @@ -949,6 +989,10 @@ e1000_get_software_semaphore(struct e1000_hw *hw) DEBUGFUNC(); + swsm = E1000_READ_REG(hw, SWSM); + swsm &= ~E1000_SWSM_SMBI; + E1000_WRITE_REG(hw, SWSM, swsm); + if (hw->mac_type != e1000_80003es2lan) return E1000_SUCCESS; @@ -1069,7 +1113,7 @@ e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask) return -E1000_ERR_SWFW_SYNC; swfw_sync = E1000_READ_REG(hw, SW_FW_SYNC); - if (!(swfw_sync & (fwmask | swmask))) + if ((swfw_sync & swmask) && !(swfw_sync & fwmask)) break; /* firmware currently using resource (fwmask) */ @@ -1118,13 +1162,23 @@ e1000_read_mac_addr(struct eth_device *nic) struct e1000_hw *hw = nic->priv; uint16_t offset; uint16_t eeprom_data; + uint32_t reg_data = 0; int i; DEBUGFUNC(); for (i = 0; i < NODE_ADDRESS_SIZE; i += 2) { offset = i >> 1; - if (e1000_read_eeprom(hw, offset, 1, &eeprom_data) < 0) { + if (hw->mac_type == e1000_igb) { + /* i210 preloads MAC address into RAL/RAH registers */ + if (offset == 0) + reg_data = E1000_READ_REG_ARRAY(hw, RA, 0); + else if (offset == 1) + reg_data >>= 16; + else if (offset == 2) + reg_data = E1000_READ_REG_ARRAY(hw, RA, 1); + eeprom_data = reg_data & 0xffff; + } else if (e1000_read_eeprom(hw, offset, 1, &eeprom_data) < 0) { DEBUGOUT("EEPROM Read Error\n"); return -E1000_ERR_EEPROM; } @@ -1320,6 +1374,13 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_ICH8_IGP_M: hw->mac_type = e1000_ich8lan; break; + case PCI_DEVICE_ID_INTEL_I210_COPPER: + case PCI_DEVICE_ID_INTEL_I210_COPPER_FLASHLESS: + case PCI_DEVICE_ID_INTEL_I210_SERDES: + case PCI_DEVICE_ID_INTEL_I210_SERDES_FLASHLESS: + case PCI_DEVICE_ID_INTEL_I210_1000BASEKX: + hw->mac_type = e1000_igb; + break; default: /* Should never have loaded on this device */ return -E1000_ERR_MAC_TYPE; @@ -1339,6 +1400,7 @@ e1000_reset_hw(struct e1000_hw *hw) uint32_t ctrl_ext; uint32_t manc; uint32_t pba = 0; + uint32_t reg; DEBUGFUNC(); @@ -1357,6 +1419,8 @@ e1000_reset_hw(struct e1000_hw *hw) /* Clear interrupt mask to stop board from generating interrupts */ DEBUGOUT("Masking off all interrupts\n"); + if (hw->mac_type == e1000_igb) + E1000_WRITE_REG(hw, I210_IAM, 0); E1000_WRITE_REG(hw, IMC, 0xffffffff); /* Disable the Transmit and Receive units. Then delay to allow @@ -1386,7 +1450,15 @@ e1000_reset_hw(struct e1000_hw *hw) E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_RST)); /* Force a reload from the EEPROM if necessary */ - if (hw->mac_type < e1000_82540) { + if (hw->mac_type == e1000_igb) { + mdelay(20); + reg = E1000_READ_REG(hw, STATUS); + if (reg & E1000_STATUS_PF_RST_DONE) + DEBUGOUT("PF OK\n"); + reg = E1000_READ_REG(hw, I210_EECD); + if (reg & E1000_EECD_AUTO_RD) + DEBUGOUT("EEC OK\n"); + } else if (hw->mac_type < e1000_82540) { /* Wait for reset to complete */ udelay(10); ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); @@ -1406,6 +1478,8 @@ e1000_reset_hw(struct e1000_hw *hw) /* Clear interrupt mask to stop board from generating interrupts */ DEBUGOUT("Masking off all interrupts\n"); + if (hw->mac_type == e1000_igb) + E1000_WRITE_REG(hw, I210_IAM, 0); E1000_WRITE_REG(hw, IMC, 0xffffffff); /* Clear any pending interrupt events. */ @@ -1415,7 +1489,8 @@ e1000_reset_hw(struct e1000_hw *hw) if (hw->mac_type == e1000_82542_rev2_0) { pci_write_config_word(hw->pdev, PCI_COMMAND, hw->pci_cmd_word); } - E1000_WRITE_REG(hw, PBA, pba); + if (hw->mac_type != e1000_igb) + E1000_WRITE_REG(hw, PBA, pba); } /****************************************************************************** @@ -1451,6 +1526,10 @@ e1000_initialize_hardware_bits(struct e1000_hw *hw) reg_txdctl1 |= E1000_TXDCTL_COUNT_DESC; E1000_WRITE_REG(hw, TXDCTL1, reg_txdctl1); + /* IGB is cool */ + if (hw->mac_type == e1000_igb) + return; + switch (hw->mac_type) { case e1000_82571: case e1000_82572: @@ -1641,6 +1720,7 @@ e1000_init_hw(struct eth_device *nic) switch (hw->mac_type) { case e1000_82545_rev_3: case e1000_82546_rev_3: + case e1000_igb: break; default: /* Workaround for PCI-X problem when BIOS sets MMRBC incorrectly. */ @@ -1670,6 +1750,8 @@ e1000_init_hw(struct eth_device *nic) /* More time needed for PHY to initialize */ if (hw->mac_type == e1000_ich8lan) mdelay(15); + if (hw->mac_type == e1000_igb) + mdelay(15); /* Call a subroutine to configure the link and setup flow control. */ ret_val = e1000_setup_link(nic); @@ -1684,7 +1766,6 @@ e1000_init_hw(struct eth_device *nic) } /* Set the receive descriptor write back policy */ - if (hw->mac_type >= e1000_82571) { ctrl = E1000_READ_REG(hw, RXDCTL); ctrl = @@ -1731,6 +1812,8 @@ e1000_init_hw(struct eth_device *nic) reg_data = E1000_READ_REG(hw, GCR); reg_data |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX; E1000_WRITE_REG(hw, GCR, reg_data); + case e1000_igb: + break; } #if 0 @@ -1807,6 +1890,7 @@ e1000_setup_link(struct eth_device *nic) case e1000_ich8lan: case e1000_82573: case e1000_82574: + case e1000_igb: hw->fc = e1000_fc_full; break; default: @@ -2267,6 +2351,8 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active) if (hw->mac_type == e1000_ich8lan) { phy_ctrl = E1000_READ_REG(hw, PHY_CTRL); + } else if (hw->mac_type == e1000_igb) { + phy_ctrl = E1000_READ_REG(hw, I210_PHY_CTRL); } else { ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data); @@ -2278,6 +2364,9 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active) if (hw->mac_type == e1000_ich8lan) { phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU; E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl); + } else if (hw->mac_type == e1000_igb) { + phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU; + E1000_WRITE_REG(hw, I210_PHY_CTRL, phy_ctrl); } else { phy_data &= ~IGP02E1000_PM_D0_LPLU; ret_val = e1000_write_phy_reg(hw, @@ -2286,6 +2375,9 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active) return ret_val; } + if (hw->mac_type == e1000_igb) + return E1000_SUCCESS; + /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during * Dx states where the power conservation is most important. During * driver activity we should enable SmartSpeed, so performance is @@ -2320,6 +2412,9 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active) if (hw->mac_type == e1000_ich8lan) { phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU; E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl); + } else if (hw->mac_type == e1000_igb) { + phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU; + E1000_WRITE_REG(hw, I210_PHY_CTRL, phy_ctrl); } else { phy_data |= IGP02E1000_PM_D0_LPLU; ret_val = e1000_write_phy_reg(hw, @@ -2328,6 +2423,9 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active) return ret_val; } + if (hw->mac_type == e1000_igb) + return E1000_SUCCESS; + /* When LPLU is enabled we should disable SmartSpeed */ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data); @@ -2549,8 +2647,10 @@ e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *data) if (e1000_is_second_port(hw)) swfw = E1000_SWFW_PHY1_SM; - if (e1000_swfw_sync_acquire(hw, swfw)) + if (e1000_swfw_sync_acquire(hw, swfw)) { + debug("%s[%i]\n", __func__, __LINE__); return -E1000_ERR_SWFW_SYNC; + } /* Write register address */ reg_val = ((reg_addr << E1000_KUMCTRLSTA_OFFSET_SHIFT) & @@ -2985,7 +3085,8 @@ e1000_setup_copper_link(struct eth_device *nic) ret_val = e1000_copper_link_igp_setup(hw); if (ret_val) return ret_val; - } else if (hw->phy_type == e1000_phy_m88) { + } else if (hw->phy_type == e1000_phy_m88 || + hw->phy_type == e1000_phy_igb) { ret_val = e1000_copper_link_mgp_setup(hw); if (ret_val) return ret_val; @@ -3229,7 +3330,8 @@ e1000_config_mac_to_phy(struct e1000_hw *hw) */ ctrl = E1000_READ_REG(hw, CTRL); ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); - ctrl &= ~(E1000_CTRL_SPD_SEL | E1000_CTRL_ILOS); + ctrl &= ~(E1000_CTRL_ILOS); + ctrl |= (E1000_CTRL_SPD_SEL); /* Set up duplex in the Device Control and Transmit Control * registers depending on negotiated values. @@ -4255,11 +4357,16 @@ e1000_get_phy_cfg_done(struct e1000_hw *hw) case e1000_82571: case e1000_82572: + case e1000_igb: while (timeout) { - if (E1000_READ_REG(hw, EEMNGCTL) & cfg_mask) - break; - else - mdelay(1); + if (hw->mac_type == e1000_igb) { + if (E1000_READ_REG(hw, I210_EEMNGCTL) & cfg_mask) + break; + } else { + if (E1000_READ_REG(hw, EEMNGCTL) & cfg_mask) + break; + } + mdelay(1); timeout--; } if (!timeout) { @@ -4488,6 +4595,7 @@ e1000_phy_reset(struct e1000_hw *hw) case e1000_phy_igp_2: case e1000_phy_igp_3: case e1000_phy_ife: + case e1000_phy_igb: ret_val = e1000_phy_hw_reset(hw); if (ret_val) return ret_val; @@ -4550,6 +4658,9 @@ static int e1000_set_phy_type (struct e1000_hw *hw) case BME1000_E_PHY_ID: hw->phy_type = e1000_phy_bm; break; + case I210_I_PHY_ID: + hw->phy_type = e1000_phy_igb; + break; /* Fall Through */ default: /* Should never have loaded on this device */ @@ -4654,6 +4765,10 @@ e1000_detect_gig_phy(struct e1000_hw *hw) if (hw->phy_id == IFE_C_E_PHY_ID) match = true; break; + case e1000_igb: + if (hw->phy_id == I210_I_PHY_ID) + match = true; + break; default: DEBUGOUT("Invalid MAC type %d\n", hw->mac_type); return -E1000_ERR_CONFIG; @@ -4705,6 +4820,7 @@ e1000_set_media_type(struct e1000_hw *hw) case e1000_ich8lan: case e1000_82573: case e1000_82574: + case e1000_igb: /* The STATUS_TBIMODE bit is reserved or reused * for the this device. */ @@ -4773,6 +4889,7 @@ e1000_sw_init(struct eth_device *nic) hw->fc_send_xon = 1; /* Media type - copper or fiber */ + hw->tbi_compatibility_en = true; e1000_set_media_type(hw); if (hw->mac_type >= e1000_82543) { @@ -4789,7 +4906,6 @@ e1000_sw_init(struct eth_device *nic) hw->media_type = e1000_media_type_fiber; } - hw->tbi_compatibility_en = true; hw->wait_autoneg_complete = true; if (hw->mac_type < e1000_82543) hw->report_tx_early = 0; @@ -4907,7 +5023,22 @@ e1000_configure_tx(struct e1000_hw *hw) hw->txd_cmd |= E1000_TXD_CMD_RPS; else hw->txd_cmd |= E1000_TXD_CMD_RS; + + + if (hw->mac_type == e1000_igb) { + E1000_WRITE_REG(hw, TCTL_EXT, 0x42 << 10); + + uint32_t reg_txdctl = E1000_READ_REG(hw, TXDCTL); + reg_txdctl |= 1 << 25; + E1000_WRITE_REG(hw, TXDCTL, reg_txdctl); + mdelay(20); + } + + + E1000_WRITE_REG(hw, TCTL, tctl); + + } /** @@ -4978,7 +5109,16 @@ e1000_configure_rx(struct e1000_hw *hw) E1000_WRITE_REG(hw, RDT, 0); /* Enable Receives */ + if (hw->mac_type == e1000_igb) { + + uint32_t reg_rxdctl = E1000_READ_REG(hw, RXDCTL); + reg_rxdctl |= 1 << 25; + E1000_WRITE_REG(hw, RXDCTL, reg_rxdctl); + mdelay(20); + } + E1000_WRITE_REG(hw, RCTL, rctl); + fill_rx(hw); } @@ -5140,9 +5280,8 @@ void e1000_get_bus_type(struct e1000_hw *hw) case e1000_82573: case e1000_82574: case e1000_80003es2lan: - hw->bus_type = e1000_bus_type_pci_express; - break; case e1000_ich8lan: + case e1000_igb: hw->bus_type = e1000_bus_type_pci_express; break; default: @@ -5223,6 +5362,7 @@ e1000_initialize(bd_t * bis) hw->autoneg_failed = 0; hw->autoneg = 1; hw->get_link_status = true; + hw->eeprom_semaphore_present = true; hw->hw_addr = pci_map_bar(devno, PCI_BASE_ADDRESS_0, PCI_REGION_MEM); hw->mac_type = e1000_undefined; @@ -5246,7 +5386,8 @@ e1000_initialize(bd_t * bis) E1000_ERR(nic, "EEPROM is invalid!\n"); continue; } - if (e1000_validate_eeprom_checksum(hw)) + if ((E1000_READ_REG(hw, I210_EECD) & E1000_EECD_FLUPD) && + e1000_validate_eeprom_checksum(hw)) continue; #endif e1000_read_mac_addr(nic); diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h index ff87af2ef8..b025ecc4fc 100644 --- a/drivers/net/e1000.h +++ b/drivers/net/e1000.h @@ -100,6 +100,7 @@ typedef enum { e1000_82574, e1000_80003es2lan, e1000_ich8lan, + e1000_igb, e1000_num_macs } e1000_mac_type; @@ -118,6 +119,7 @@ typedef enum { e1000_eeprom_flash, e1000_eeprom_ich8, e1000_eeprom_none, /* No NVM support */ + e1000_eeprom_invm, e1000_num_eeprom_types } e1000_eeprom_type; @@ -212,6 +214,7 @@ typedef enum { e1000_phy_gg82563, e1000_phy_igp_3, e1000_phy_ife, + e1000_phy_igb, e1000_phy_bm, e1000_phy_undefined = 0xFF } e1000_phy_type; @@ -686,7 +689,9 @@ struct e1000_ffvt_entry { #define E1000_CTRL 0x00000 /* Device Control - RW */ #define E1000_STATUS 0x00008 /* Device Status - RO */ #define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */ +#define E1000_I210_EECD 0x12010 /* EEPROM/Flash Control - RW */ #define E1000_EERD 0x00014 /* EEPROM Read - RW */ +#define E1000_I210_EERD 0x12014 /* EEPROM Read - RW */ #define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */ #define E1000_MDIC 0x00020 /* MDI Control - RW */ #define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */ @@ -698,6 +703,7 @@ struct e1000_ffvt_entry { #define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */ #define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */ #define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */ +#define E1000_I210_IAM 0x000E0 /* Interrupt Ack Auto Mask - RW */ #define E1000_RCTL 0x00100 /* RX Control - RW */ #define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */ #define E1000_TXCW 0x00178 /* TX Configuration Word - RW */ @@ -711,14 +717,17 @@ struct e1000_ffvt_entry { #define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */ #define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */ #define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */ +#define E1000_I210_PHY_CTRL 0x00E14 /* PHY Control Register in CSR */ #define FEXTNVM_SW_CONFIG 0x0001 #define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */ #define E1000_PBS 0x01008 /* Packet Buffer Size */ #define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */ +#define E1000_I210_EEMNGCTL 0x12030 /* MNG EEprom Control */ #define E1000_FLASH_UPDATES 1000 #define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */ #define E1000_FLASHT 0x01028 /* FLASH Timer Register */ #define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */ +#define E1000_I210_EEWR 0x12018 /* EEPROM Write Register - RW */ #define E1000_FLSWCTL 0x01030 /* FLASH control register */ #define E1000_FLSWDATA 0x01034 /* FLASH data register */ #define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */ @@ -1222,6 +1231,7 @@ struct e1000_hw { #define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */ #define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */ #define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */ +#define E1000_STATUS_PF_RST_DONE 0x00200000 /* PCI-X bus speed */ /* Constants used to intrepret the masked PCI-X bus speed. */ #define E1000_STATUS_PCIX_SPEED_66 0x00000000 /* PCI-X bus speed 50-66 MHz */ @@ -2438,6 +2448,8 @@ struct e1000_hw { #define BME1000_E_PHY_ID 0x01410CB0 +#define I210_I_PHY_ID 0x01410C00 + /* Miscellaneous PHY bit definitions. */ #define PHY_PREAMBLE 0xFFFFFFFF #define PHY_SOF 0x01 diff --git a/include/pci_ids.h b/include/pci_ids.h index 6bab677449..f220c3aa5c 100644 --- a/include/pci_ids.h +++ b/include/pci_ids.h @@ -2546,6 +2546,13 @@ #define PCI_DEVICE_ID_INTEL_82441 0x1237 #define PCI_DEVICE_ID_INTEL_82380FB 0x124b #define PCI_DEVICE_ID_INTEL_82439 0x1250 +#define PCI_DEVICE_ID_INTEL_I210_UNPROGRAMMED 0x1531 +#define PCI_DEVICE_ID_INTEL_I210_COPPER 0x1533 +#define PCI_DEVICE_ID_INTEL_I210_SERDES 0x1536 +#define PCI_DEVICE_ID_INTEL_I210_1000BASEKX 0x1537 +#define PCI_DEVICE_ID_INTEL_I210_EXTPHY 0x1538 +#define PCI_DEVICE_ID_INTEL_I210_COPPER_FLASHLESS 0x157b +#define PCI_DEVICE_ID_INTEL_I210_SERDES_FLASHLESS 0x157c #define PCI_DEVICE_ID_INTEL_80960_RP 0x1960 #define PCI_DEVICE_ID_INTEL_82840_HB 0x1a21 #define PCI_DEVICE_ID_INTEL_82845_HB 0x1a30 -- 2.39.5