From 95a2d438c905e78b061768f5339abc9193675df4 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 23 Mar 2016 01:40:03 +0900 Subject: [PATCH] ARM: uniphier: fix README instruction for updating U-Boot via TFTP Commit 3cb9abc9c512 ("ARM: uniphier: update U-Boot file names in workflow") missed to update these two sentences. Fix them now. Replace u-boot-spl-dtb.bin and u-boot-dtb.img with u-boot-spl.bin and u-boot.img, respectively. Signed-off-by: Masahiro Yamada --- doc/README.uniphier | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/doc/README.uniphier b/doc/README.uniphier index 8d043be272..47863a4af2 100644 --- a/doc/README.uniphier +++ b/doc/README.uniphier @@ -80,8 +80,8 @@ Write two files to the NAND device as follows: - u-boot.img at the offset address 0x00010000 If a TFTP server is available, the images can be easily updated. -Just copy the u-boot-spl-dtb.bin and u-boot-dtb.img to the TFTP public -directory, and then run the following command at the U-Boot command line: +Just copy the u-boot-spl.bin and u-boot.img to the TFTP public directory, +and then run the following command at the U-Boot command line: => run nandupdate @@ -94,8 +94,8 @@ Write two files to the Boot partition 1 of the eMMC device as follows: - u-boot.img at the offset address 0x00010000 If a TFTP server is available, the images can be easily updated. -Just copy the u-boot-spl-dtb.bin and u-boot-dtb.img to the TFTP public -directory, and then run the following command at the U-Boot command line: +Just copy the u-boot-spl.bin and u-boot.img to the TFTP public directory, +and then run the following command at the U-Boot command line: => run emmcupdate -- 2.39.5