From 96ef6d828f72a8682d832853f202e2056837b11c Mon Sep 17 00:00:00 2001 From: cuz Date: Sun, 28 Dec 2003 18:35:00 +0000 Subject: [PATCH] PET-II improvements git-svn-id: svn://svn.cc65.org/cc65/trunk@2849 b7a2c559-68d2-44c3-8de9-860c34a00d81 --- libsrc/cbm510/crt0.s | 211 ++++++++++++++++++++++++--------------- libsrc/cbm610/crt0.s | 215 +++++++++++++++++++++++++--------------- libsrc/cbm610/extzp.inc | 4 +- 3 files changed, 269 insertions(+), 161 deletions(-) diff --git a/libsrc/cbm510/crt0.s b/libsrc/cbm510/crt0.s index 4ed52b816..da0ef0ab2 100644 --- a/libsrc/cbm510/crt0.s +++ b/libsrc/cbm510/crt0.s @@ -72,6 +72,109 @@ .endproc +;------------------------------------------------------------------------------ +; Page 3 data. This page contains the break vector and the bankswitch +; subroutine that is copied into high memory on startup. The space occupied by +; this routine will later be used for a copy of the bank 15 stack. It must be +; saved, since we're going to destroy it when calling bank 15. + +.segment "PAGE3" + +BRKVec: .addr _exit ; BRK indirect vector + +.proc callbank15 + + excrts = $FEFE + +.org $FEC3 + +entry: php + pha + lda #$0F ; Bank 15 + sta IndReg + txa + pha + tya + pha + sei + ldy #$FF + lda (sysp1),y + tay + lda ExecReg + sta (sysp1),y + dey + + lda #.hibyte(excrts-1) + sta (sysp1),y + dey + lda #.lobyte(excrts-1) + sta (sysp1),y + + tya + sec + sbc #7 + sta $1FF ; Save new sp + tay + + tsx + + pla + iny + sta (sysp1),y + pla + iny + sta (sysp1),y + pla + iny + sta (sysp1),y + pla + iny + sta (sysp1),y + + lda $105,x + sec + sbc #3 + iny + sta (sysp1),y + lda $106,x + sbc #0 + iny + sta (sysp1),y + + ldy $1FF ; Restore sp in bank 15 + + lda #.hibyte(expull-1) + sta (sysp1),y + dey + lda #.lobyte(expull-1) + sta (sysp1),y + dey + pla + pla + tsx + stx $1FF + tya + tax + txs + lda IndReg + jmp $FFF6 + +expull: pla + tay + pla + tax + pla + plp + rts + +.if (expull <> $FF26) +.error "Symbol expull must be aligned with kernal in bank 15" +.endif + +.reloc + +.endproc + ;------------------------------------------------------------------------------ ; The code in the target bank when switching back will be put at the bottom ; of the stack. We will jump here to switch segments. The range $F2..$FF is @@ -79,11 +182,7 @@ .segment "STARTUP" -Back: sei - ldx spsave - txs - lda IndReg - sta ExecReg +Back: sta ExecReg ; We are at $100 now. The following snippet is a copy of the code that is poked ; in the system bank memory by the basic header program, it's only for @@ -129,27 +228,9 @@ Back: sei .word $ebd1 ; ktab4 .endproc -; The following code is part of the kernal call subroutine. It is copied -; to $FFAE - -.proc callsysbank_15 - php - pha - lda #$0F ; Bank 15 - sta IndReg - sei -.endproc - -; Save the old stack pointer from the system bank and setup our hw sp - -Origin: tsx - stx spsave ; Save the system stackpointer - ldx #$FE ; Leave $1FF untouched for cross bank calls - txs ; Set up our own stack - ; Switch the indirect segment to the system bank - lda #$0F +Origin: lda #$0F sta IndReg ; Initialize the extended zeropage @@ -160,6 +241,15 @@ L1: lda extzp,x dex bpl L1 +; Save the old stack pointer from the system bank and setup our hw sp + + tsx + txa + ldy #$FF + sta (sysp1),y ; Save system stack point into $F:$1FF + ldx #$FE ; Leave $1FF untouched for cross bank calls + txs ; Set up our own stack + ; Copy stuff from the system zeropage to ours lda #.sizeof(transfer_table) @@ -184,57 +274,34 @@ L3: lda vectors,x ; Setup the C stack - lda #.lobyte($FEAE - .sizeof(callsysbank_15)) + lda #.lobyte(callbank15::entry) sta sp - lda #.hibyte($FEAE - .sizeof(callsysbank_15)) + lda #.hibyte(callbank15::entry) sta sp+1 ; Setup the subroutine and jump vector table that redirects kernal calls to -; the system bank. Copy the bank switch routines starting at $FEAE from the -; system bank into the current bank. +; the system bank. - - ldy #.sizeof(callsysbank_15)-1 ; Copy the modified part -@L1: lda callsysbank_15,y - sta $FEAE - .sizeof(callsysbank_15),y + ldy #.sizeof(callbank15) +@L1: lda callbank15-1,y + sta callbank15::entry-1,y dey - bpl @L1 - - lda #.lobyte($FEAE) ; Copy the ROM part - sta ptr1 - lda #.hibyte($FEAE) - sta ptr1+1 - ldy #$00 -@L2: lda (ptr1),y - sta $FEAE,y - iny - cpy #<($FF6F-$FEAE) - bne @L2 + bne @L1 -; Setup the jump vector table +; Setup the jump vector table. Y is zero on entry. - ldy #$00 ldx #45-1 ; Number of vectors -@L3: lda #$20 ; JSR opcode +@L2: lda #$20 ; JSR opcode sta $FF6F,y iny - lda #.lobyte($FEAE - .sizeof(callsysbank_15)) + lda #.lobyte(callbank15::entry) sta $FF6F,y iny - lda #.hibyte($FEAE - .sizeof(callsysbank_15)) + lda #.hibyte(callbank15::entry) sta $FF6F,y iny dex - bpl @L3 - -; Copy the stack from the system bank into page 3 - - ldy #$FF -L4: lda (sysp1),y - sta $300,y - dey - cpy spsave - bne L4 + bpl @L2 ; Set the indirect segment to bank we're executing in @@ -414,23 +481,20 @@ _exit: lda #$00 bne @L0 .endif -; Copy back the old system bank stack contents - - ldy #$FF -@L1: lda $300,y - sta (sysp1),y - dey - cpy spsave - bne @L1 - ; Setup the welcome code at the stack bottom in the system bank. - ldy #$00 + ldy #$FF + lda (sysp1),y ; Load system bank sp + tax + iny ; Y = 0 lda #$58 ; CLI opcode sta (sysp1),y iny lda #$60 ; RTS opcode sta (sysp1),y + lda IndReg + sei + txs jmp Back ; ------------------------------------------------------------------------- @@ -504,19 +568,10 @@ nmi: rti dobrk: jmp (BRKVec) -; ------------------------------------------------------------------------- -; Page 3 - -.segment "PAGE3" - -BRKVec: .addr _exit ; BRK indirect vector - - ; ------------------------------------------------------------------------- ; Data area .data -spsave: .res 1 vidsave:.res 3 .bss diff --git a/libsrc/cbm610/crt0.s b/libsrc/cbm610/crt0.s index f6acc9eca..e6bdcb3d5 100644 --- a/libsrc/cbm610/crt0.s +++ b/libsrc/cbm610/crt0.s @@ -72,6 +72,109 @@ .endproc +;------------------------------------------------------------------------------ +; Page 3 data. This page contains the break vector and the bankswitch +; subroutine that is copied into high memory on startup. The space occupied by +; this routine will later be used for a copy of the bank 15 stack. It must be +; saved, since we're going to destroy it when calling bank 15. + +.segment "PAGE3" + +BRKVec: .addr _exit ; BRK indirect vector + +.proc callbank15 + + excrts = $FF05 + +.org $FECB + +entry: php + pha + lda #$0F ; Bank 15 + sta IndReg + txa + pha + tya + pha + sei + ldy #$FF + lda (sysp1),y + tay + lda ExecReg + sta (sysp1),y + dey + + lda #.hibyte(excrts-1) + sta (sysp1),y + dey + lda #.lobyte(excrts-1) + sta (sysp1),y + + tya + sec + sbc #7 + sta $1FF ; Save new sp + tay + + tsx + + pla + iny + sta (sysp1),y + pla + iny + sta (sysp1),y + pla + iny + sta (sysp1),y + pla + iny + sta (sysp1),y + + lda $105,x + sec + sbc #3 + iny + sta (sysp1),y + lda $106,x + sbc #0 + iny + sta (sysp1),y + + ldy $1FF ; Restore sp in bank 15 + + lda #.hibyte(expull-1) + sta (sysp1),y + dey + lda #.lobyte(expull-1) + sta (sysp1),y + dey + pla + pla + tsx + stx $1FF + tya + tax + txs + lda IndReg + jmp $FFF6 + +expull: pla + tay + pla + tax + pla + plp + rts + +.if (expull <> $FF2E) +.error "Symbol expull must be aligned with kernal in bank 15" +.endif + +.reloc + +.endproc + ;------------------------------------------------------------------------------ ; The code in the target bank when switching back will be put at the bottom ; of the stack. We will jump here to switch segments. The range $F2..$FF is @@ -79,11 +182,7 @@ .segment "STARTUP" -Back: sei - ldx spsave - txs - lda IndReg - sta ExecReg +Back: sta ExecReg ; We are at $100 now. The following snippet is a copy of the code that is poked ; in the system bank memory by the basic header program, it's only for @@ -100,7 +199,7 @@ Back: sei jmp Origin -; Hardware vectors, copied to $FFFA +; Hardware vectors, copied to $FFF6 .proc vectors sta ExecReg @@ -129,27 +228,9 @@ Back: sei .word $eb49 ; ktab4 .endproc -; The following code is part of the kernal call subroutine. It is copied -; to $FFAE - -.proc callsysbank_15 - php - pha - lda #$0F ; Bank 15 - sta IndReg - sei -.endproc - -; Save the old stack pointer from the system bank and setup our hw sp - -Origin: tsx - stx spsave ; Save the system stackpointer - ldx #$FE ; Leave $1FF untouched for cross bank calls - txs ; Set up our own stack - ; Switch the indirect segment to the system bank - lda #$0F +Origin: lda #$0F sta IndReg ; Initialize the extended zeropage @@ -160,6 +241,15 @@ L1: lda extzp,x dex bpl L1 +; Save the old stack pointer from the system bank and setup our hw sp + + tsx + txa + ldy #$FF + sta (sysp1),y ; Save system stack point into $F:$1FF + ldx #$FE ; Leave $1FF untouched for cross bank calls + txs ; Set up our own stack + ; Copy stuff from the system zeropage to ours lda #.sizeof(transfer_table) @@ -184,57 +274,34 @@ L3: lda vectors,x ; Setup the C stack - lda #.lobyte($FEB5 - .sizeof(callsysbank_15)) + lda #.lobyte(callbank15::entry) sta sp - lda #.hibyte($FEB5 - .sizeof(callsysbank_15)) + lda #.hibyte(callbank15::entry) sta sp+1 ; Setup the subroutine and jump vector table that redirects kernal calls to -; the system bank. Copy the bank switch routines starting at $FEB5 from the -; system bank into the current bank. - +; the system bank. - ldy #.sizeof(callsysbank_15)-1 ; Copy the modified part -@L1: lda callsysbank_15,y - sta $FEB5 - .sizeof(callsysbank_15),y + ldy #.sizeof(callbank15) +@L1: lda callbank15-1,y + sta callbank15::entry-1,y dey - bpl @L1 - - lda #.lobyte($FEB5) ; Copy the ROM part - sta ptr1 - lda #.hibyte($FEB5) - sta ptr1+1 - ldy #$00 -@L2: lda (ptr1),y - sta $FEB5,y - iny - cpy #<($FF6F-$FEB5) - bne @L2 + bne @L1 -; Setup the jump vector table +; Setup the jump vector table. Y is zero on entry. - ldy #$00 ldx #45-1 ; Number of vectors -@L3: lda #$20 ; JSR opcode +@L2: lda #$20 ; JSR opcode sta $FF6F,y iny - lda #.lobyte($FEB5 - .sizeof(callsysbank_15)) + lda #.lobyte(callbank15::entry) sta $FF6F,y iny - lda #.hibyte($FEB5 - .sizeof(callsysbank_15)) + lda #.hibyte(callbank15::entry) sta $FF6F,y iny dex - bpl @L3 - -; Copy the stack from the system bank into page 3 - - ldy #$FF -L4: lda (sysp1),y - sta $300,y - dey - cpy spsave - bne L4 + bpl @L2 ; Set the indirect segment to bank we're executing in @@ -321,23 +388,20 @@ _exit: lda #$00 bne @L0 .endif -; Copy back the old system bank stack contents - - ldy #$FF -@L1: lda $300,y - sta (sysp1),y - dey - cpy spsave - bne @L1 - ; Setup the welcome code at the stack bottom in the system bank. - ldy #$00 + ldy #$FF + lda (sysp1),y ; Load system bank sp + tax + iny ; Y = 0 lda #$58 ; CLI opcode sta (sysp1),y iny lda #$60 ; RTS opcode sta (sysp1),y + lda IndReg + sei + txs jmp Back ; ------------------------------------------------------------------------- @@ -411,20 +475,9 @@ nmi: rti dobrk: jmp (BRKVec) -; ------------------------------------------------------------------------- -; Page 3 - -.segment "PAGE3" - -BRKVec: .addr _exit ; BRK indirect vector - - ; ------------------------------------------------------------------------- ; Data area. -.data -spsave: .res 1 - .bss irqcount: .byte 0 diff --git a/libsrc/cbm610/extzp.inc b/libsrc/cbm610/extzp.inc index af769e32e..bb46a185b 100644 --- a/libsrc/cbm610/extzp.inc +++ b/libsrc/cbm610/extzp.inc @@ -10,7 +10,7 @@ .globalzp ktab1, ktab2, ktab3, ktab4 .globalzp sysp0, time, segsave, ktmp, CURS_X, CURS_Y, RVS, config - .globalzp CharPtr, keyidx, keybuf, keyscanbuf, keysave, modkey - .globalzp norkey, graphmode, lastidx, rptdelay, rptcount + .globalzp CharPtr, keyidx, keybuf, keyscanbuf, keysave + .globalzp modkey, norkey, graphmode, lastidx, rptdelay, rptcount -- 2.39.5