From 98090cd75cdb40b2ab94c806c338540a5716748b Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Sun, 31 Aug 2008 18:05:32 +0200 Subject: [PATCH] avr32: Add gclk helper functions Add two helper functions for configuring and enabling generic clocks: - gclk_enable_output: Enables output on a GCLKx pin - gclk_set_rate: Configures a gclk to run at a specific rate This should eliminate any reason to go mucking about with PM registers from board code. Signed-off-by: Haavard Skinnemoen --- cpu/at32ap/at32ap700x/clk.c | 25 +++++++ include/asm-avr32/arch-at32ap700x/clk.h | 99 ++++++++++++++++++++++++- 2 files changed, 122 insertions(+), 2 deletions(-) diff --git a/cpu/at32ap/at32ap700x/clk.c b/cpu/at32ap/at32ap700x/clk.c index b3aa03495f..a6a6c885e5 100644 --- a/cpu/at32ap/at32ap700x/clk.c +++ b/cpu/at32ap/at32ap700x/clk.c @@ -25,6 +25,7 @@ #include #include +#include #include "sm.h" @@ -66,3 +67,27 @@ void clk_init(void) sm_writel(PM_MCCTRL, SM_BIT(PLLSEL)); #endif } + +unsigned long __gclk_set_rate(unsigned int id, enum gclk_parent parent, + unsigned long rate, unsigned long parent_rate) +{ + unsigned long divider; + + if (rate == 0 || parent_rate == 0) { + sm_writel(PM_GCCTRL(id), 0); + return 0; + } + + divider = (parent_rate + rate / 2) / rate; + if (divider <= 1) { + sm_writel(PM_GCCTRL(id), parent | SM_BIT(CEN)); + rate = parent_rate; + } else { + divider = min(255, divider / 2 - 1); + sm_writel(PM_GCCTRL(id), parent | SM_BIT(CEN) | SM_BIT(DIVEN) + | SM_BF(DIV, divider)); + rate = parent_rate / (2 * (divider + 1)); + } + + return rate; +} diff --git a/include/asm-avr32/arch-at32ap700x/clk.h b/include/asm-avr32/arch-at32ap700x/clk.h index e9a4fe4d64..b2710a4ba8 100644 --- a/include/asm-avr32/arch-at32ap700x/clk.h +++ b/include/asm-avr32/arch-at32ap700x/clk.h @@ -23,11 +23,13 @@ #define __ASM_AVR32_ARCH_CLK_H__ #include +#include #ifdef CONFIG_PLL -#define MAIN_CLK_RATE ((CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL) +#define PLL0_RATE ((CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL) +#define MAIN_CLK_RATE PLL0_RATE #else -#define MAIN_CLK_RATE (CFG_OSC0_HZ) +#define MAIN_CLK_RATE (CFG_OSC0_HZ) #endif static inline unsigned long get_cpu_clk_rate(void) @@ -87,4 +89,97 @@ extern void gclk_init(void) __attribute__((weak)); /* Board code may need the SDRAM base clock as a compile-time constant */ #define SDRAMC_BUS_HZ (MAIN_CLK_RATE >> CFG_CLKDIV_HSB) +/* Generic clock control */ +enum gclk_parent { + GCLK_PARENT_OSC0 = 0, + GCLK_PARENT_OSC1 = 1, + GCLK_PARENT_PLL0 = 2, + GCLK_PARENT_PLL1 = 3, +}; + +/* Some generic clocks have specific roles */ +#define GCLK_DAC_SAMPLE_CLK 6 +#define GCLK_LCDC_PIXCLK 7 + +extern unsigned long __gclk_set_rate(unsigned int id, enum gclk_parent parent, + unsigned long rate, unsigned long parent_rate); + +/** + * gclk_set_rate - configure and enable a generic clock + * @id: Which GCLK[id] to enable + * @parent: Parent clock feeding the GCLK + * @rate: Target rate of the GCLK in Hz + * + * Returns the actual GCLK rate in Hz, after rounding to the nearest + * supported rate. + * + * All three parameters are usually constant, hence the inline. + */ +static inline unsigned long gclk_set_rate(unsigned int id, + enum gclk_parent parent, unsigned long rate) +{ + unsigned long parent_rate; + + if (id > 7) + return 0; + + switch (parent) { + case GCLK_PARENT_OSC0: + parent_rate = CFG_OSC0_HZ; + break; +#ifdef CFG_OSC1_HZ + case GCLK_PARENT_OSC1: + parent_rate = CFG_OSC1_HZ; + break; +#endif +#ifdef PLL0_RATE + case GCLK_PARENT_PLL0: + parent_rate = PLL0_RATE; + break; +#endif +#ifdef PLL1_RATE + case GCLK_PARENT_PLL1: + parent_rate = PLL1_RATE; + break; +#endif + default: + parent_rate = 0; + break; + } + + return __gclk_set_rate(id, parent, rate, parent_rate); +} + +/** + * gclk_enable_output - enable output on a GCLK pin + * @id: Which GCLK[id] pin to enable + * @drive_strength: Drive strength of external GCLK pin, if applicable + */ +static inline void gclk_enable_output(unsigned int id, + unsigned long drive_strength) +{ + switch (id) { + case 0: + portmux_select_peripheral(PORTMUX_PORT_A, 1 << 30, + PORTMUX_FUNC_A, drive_strength); + break; + case 1: + portmux_select_peripheral(PORTMUX_PORT_A, 1 << 31, + PORTMUX_FUNC_A, drive_strength); + break; + case 2: + portmux_select_peripheral(PORTMUX_PORT_B, 1 << 19, + PORTMUX_FUNC_A, drive_strength); + break; + case 3: + portmux_select_peripheral(PORTMUX_PORT_B, 1 << 29, + PORTMUX_FUNC_A, drive_strength); + break; + case 4: + portmux_select_peripheral(PORTMUX_PORT_B, 1 << 30, + PORTMUX_FUNC_A, drive_strength); + break; + } +} + #endif /* __ASM_AVR32_ARCH_CLK_H__ */ -- 2.39.5