From 9b7bd65883b0c0f76b5976c44b4808d6141ab30c Mon Sep 17 00:00:00 2001 From: oharboe Date: Thu, 23 Apr 2009 14:03:42 +0000 Subject: [PATCH] stm32.cfg can expect one of 4 id's. git-svn-id: svn://svn.berlios.de/openocd/trunk@1516 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- doc/openocd.texi | 4 +++- src/target/target/stm32.cfg | 10 +++++----- 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/doc/openocd.texi b/doc/openocd.texi index 84400fce..24c3dfd2 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -1606,7 +1606,9 @@ bits long, during Capture-IR 0x42 is loaded into the IR, and bits @itemize @bullet @item @b{-expected-id NUMBER} @* By default it is zero. If non-zero represents the -expected tap ID used when the JTAG chain is examined. See below. +expected tap ID used when the JTAG chain is examined. Repeat +the option as many times as required if multiple id's can be +expected. See below. @item @b{-disable} @item @b{-enable} @* By default not specified the tap is enabled. Some chips have a diff --git a/src/target/target/stm32.cfg b/src/target/target/stm32.cfg index 2c3e0709..2fe17850 100644 --- a/src/target/target/stm32.cfg +++ b/src/target/target/stm32.cfg @@ -37,15 +37,15 @@ if { [info exists BSTAPID ] } { # See STM Document RM0008 # Section 26.6.2 # Low density devices, Rev A - set _BSTAPID 0x06412041 + set _BSTAPID1 0x06412041 # Medium density devices, Rev A - set _BSTAPID 0x06410041 + set _BSTAPID2 0x06410041 # Medium density devices, Rev B and Rev Z - set _BSTAPID 0x16410041 + set _BSTAPID3 0x16410041 # High density devices, Rev A - set _BSTAPID 0x06414041 + set _BSTAPID4 0x06414041 } -jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID +jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID1 -expected-id $_BSTAPID2 -expected-id $_BSTAPID3 -expected-id $_BSTAPID4 set _TARGETNAME [format "%s.cpu" $_CHIPNAME] target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME -- 2.39.5