From 9bad466a3724558d7611e36f2e22b62184120e9d Mon Sep 17 00:00:00 2001 From: Pierangelo Masarati Date: Thu, 15 Apr 2004 00:59:18 +0000 Subject: [PATCH] added schema from draft-joslin-config-schema-07.txt --- doc/drafts/draft-joslin-config-schema-07.txt | 1680 ++++++++++++++++++ servers/slapd/schema/duaconf.schema | 224 +++ 2 files changed, 1904 insertions(+) create mode 100644 doc/drafts/draft-joslin-config-schema-07.txt create mode 100644 servers/slapd/schema/duaconf.schema diff --git a/doc/drafts/draft-joslin-config-schema-07.txt b/doc/drafts/draft-joslin-config-schema-07.txt new file mode 100644 index 0000000000..f26615d409 --- /dev/null +++ b/doc/drafts/draft-joslin-config-schema-07.txt @@ -0,0 +1,1680 @@ + + + +Application Working Group M. Ansari +INTERNET-DRAFT Sun Microsystems, Inc. +Expires Febuary 2003 L. Howard + PADL Software Pty. Ltd. + B. Joslin [ed.] + Hewlett-Packard Company + + September 15th, 2003 +Intended Category: Informational + + + A Configuration Schema for LDAP Based + Directory User Agents + + + +Status of this Memo + + This memo provides information for the Internet community. This + memo does not specify an Internet standard of any kind. Distribu- + tion of this memo is unlimited. + + This document is an Internet-Draft and is in full conformance with + all provisions of Section 10 of RFC2026. + + This document is an Internet-Draft. Internet-Drafts are working + documents of the Internet Engineering Task Force (IETF), its areas, + and its working groups. Note that other groups may also distribute + working documents as Internet-Drafts. + + Internet-Drafts are draft documents valid for a maximum of six + months. Internet-Drafts may be updated, replaced, or made obsolete + by other documents at any time. It is not appropriate to use + Internet-Drafts as reference material or to cite them other than as + a "working draft" or "work in progress". + + To learn the current status of any Internet-Draft, please check the + 1id-abstracts.txt listing contained in the Internet-Drafts Shadow + Directories on ds.internic.net (US East Coast), nic.nordu.net + (Europe), ftp.isi.edu (US West Coast), or munnari.oz.au (Pacific + Rim). + + Distribution of this document is unlimited. + +Abstract + + This document describes a mechanism for global configuration of + similar directory user agents. This document defines a schema for + + + +Joslin [Page 1] + +Internet-Draft DUA Configuration Schema October 2002 + + + configuration of these DUAs that may be discovered using the Light- + weight Directory Access Protocol in RFC 2251[17]. A set of attri- + bute types and an objectclass are proposed, along with specific + guidelines for interpreting them. A significant feature of the + global configuration policy for DUAs is a mechanism that allows + DUAs to re-configure their schema to that of the end user's + environment. This configuration is achieved through attribute and + objectclass mapping. This document is intended to be a skeleton + for future documents that describe configuration of specific DUA + services. + + +1. Background & Motivation + + The LDAP protocol has brought about a new and nearly ubiquitous + acceptance of the directory server. Many new client applications + (DUAs) are being created that use LDAP directories for many dif- + ferent services. And although the LDAP protocol has eased the + development of these applications, some challenges still exist for + both developers and directory administrators. + + The authors of this document are implementers of DUAs described by + RFC 2307 [14]. In developing these agents, we felt there are + several issues that still need to be addressed to ease the deploy- + ment and configuration of a large network of these DUAs. + + One of these challenges stems from the lack of a utopian schema. A + utopian schema would be one that every application developer could + agree upon and that would support every application. Unfortunately + today, many DUAs define their own schema (like RFC 2307 vs. + Microsoft's Services for Unix [13]) containing similar attributes, + but with different attribute names. This can lead to data redun- + dancy within directory entries and give directory administrators + unwanted challenges, updating schemas and synchronizing data. + + So, one goal of this document is to eliminate data redundancy by + having DUAs configure themselves to the schema of the deployed + directory, instead of forcing it's own schema on the directory. + + Another goal of this document is to provide the DUA with enough + configuration information so that it can discover how to retrieve + its data in the directory, such as what locations to search in the + directory tree. + + Finally, this document intends to describe a configuration method + for DUAs that can be shared among many DUAs, on various platforms, + providing as such, a configuration profile, the purpose is to cen- + tralize and simplify management of DUAs. + + + +Joslin [Page 2] + +Internet-Draft DUA Configuration Schema October 2002 + + + This document is intended to provide the skeleton framework for + future drafts, which will describe the individual implementation + details for the particular services provided by that DUA. The + authors of this document plan to develop such a document for the + Network Information Service DUA, described by RFC 2307 or its suc- + cessor. + + We expect that as DUAs take advantage of this configuration scheme, + each DUA will require additional configuration parameters, not + specified by this document. Thus, we would expect that new auxili- + ary object classes, containing new configuration attributes will be + created, and then joined with the structural class defined by this + document to create a configuration profile for a particular DUA + service. And that by joining various auxiliary objectclasses for + different DUA services, that configuration of various DUA services + can be controlled by a single configuration profile entry. + + +2. General Issues + + The schema defined by this document is defined under the "DUA Con- + figuration Schema." This schema is derived from the OID: iso (1) + org (3) dod (6) internet (1) private (4) enterprises (1) Hewlett- + Packard Company (11) directory (1) LDAP-UX Integration Project (3) + DUA Configuration Schema (1). This OID is represented in this + document by the keystring "DUAConfSchemaOID" + (1.3.6.1.4.1.11.1.3.1). + +2.1 Terminology + + The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", + "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in + this document are to be interpreted as described in RFC 2119 [15]. + +2.2 Attributes + + The attributes and classes defined in this document are summarized + below. + + The following attributes are defined in this document: + + preferredServerList + defaultServerList + defaultSearchBase + defaultSearchScope + authenticationMethod + credentialLevel + serviceSearchDescriptor + + + +Joslin [Page 3] + +Internet-Draft DUA Configuration Schema October 2002 + + + serviceCredentialLevel + serviceAuthenticationMethod + attributeMap + objectclassMap + searchTimeLimit + bindTimeLimit + followReferrals + dereferenceAliases + profileTTL + +2.3 Object Classes + + The following object class is defined in this document: + + DUAConfigProfile + +2.4 Syntax Definitions + + The following syntax definitions are used throughout this document. + This document does not define new syntaxes that must be supported + by the directory server. The string encoding used by the attri- + butes defined in this document can be found section 5. + + keystring as defined by RFC 2252 [2] + descr as defined by RFC 2252 section 4.1 + a as defined by RFC 2252 section 4.1 + d as defined by RFC 2252 section 4.1 + space as defined by RFC 2252 section 4.1 + whsp as defined by RFC 2252 section 4.1 + base as defined by RFC 2253 [3] + DistinguishedName as defined by RFC 2253 section 2 + RelativeDistinguishedName as defined by RFC 2253 section 2 + scope as defined by RFC 2255 [5] + IPv4address as defined by RFC 2396 [9] + hostport as defined by RFC 2396 section 3.2.2 + port as defined by RFC 2396 section 3.2.2 + ipv6reference as defined by RFC 2732 [10] + host as defined by RFC 2732 section 3 + serviceID = keystring + + +3. Attribute Definitions + + This section contains attribute definitions to be used by DUAs when + discovering their configuration. + + ( DUAConfSchemaOID.1.0 NAME 'defaultServerList' + DESC 'Default LDAP server host address used by a DUA' + + + +Joslin [Page 4] + +Internet-Draft DUA Configuration Schema October 2002 + + + EQUALITY caseIgnoreMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 + SINGLE-VALUE ) + + ( DUAConfSchemaOID.1.1 NAME 'defaultSearchBase' + DESC 'Default LDAP base DN used by a DUA' + EQUALITY distinguishedNameMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 + SINGLE-VALUE ) + + ( DUAConfSchemaOID.1.2 NAME 'preferredServerList' + DESC 'Preferred LDAP server host addresses to be used by a + DUA' + EQUALITY caseIgnoreMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 + SINGLE-VALUE ) + + ( DUAConfSchemaOID.1.3 NAME 'searchTimeLimit' + DESC 'Maximum time in seconds a DUA should allow for a + search to complete' + EQUALITY integerMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 + SINGLE-VALUE ) + + ( DUAConfSchemaOID.1.4 NAME 'bindTimeLimit' + DESC 'Maximum time in seconds a DUA should allow for the + bind operation to complete' + EQUALITY integerMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 + SINGLE-VALUE ) + + ( DUAConfSchemaOID.1.5 NAME 'followReferrals' + DESC 'Tells DUA if it should follow referrals + returned by a DSA search result' + EQUALITY booleanMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 + SINGLE-VALUE ) + + ( DUAConfSchemaOID.1.16 NAME 'dereferenceAliases' + DESC 'Tells DUA if it should dereference aliases' + EQUALITY booleanMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 + SINGLE-VALUE ) + + ( DUAConfSchemaOID.1.6 NAME 'authenticationMethod' + DESC 'A keystring which identifies the type of + authentication method used to contact the DSA' + EQUALITY caseIgnoreMatch + + + +Joslin [Page 5] + +Internet-Draft DUA Configuration Schema October 2002 + + + SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 + SINGLE-VALUE ) + + ( DUAConfSchemaOID.1.7 NAME 'profileTTL' + DESC 'Time to live, in seconds, before a client DUA + should re-read this configuration profile' + EQUALITY integerMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 + SINGLE-VALUE ) + + ( DUAConfSchemaOID.1.14 NAME 'serviceSearchDescriptor' + DESC 'LDAP search descriptor list used by a DUA' + EQUALITY caseExactMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 ) + + ( DUAConfSchemaOID.1.9 NAME 'attributeMap' + DESC 'Attribute mappings used by a DUA' + EQUALITY caseIgnoreIA5Match + SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) + + ( DUAConfSchemaOID.1.10 NAME 'credentialLevel' + DESC 'Identifies type of credentials a DUA should + use when binding to the LDAP server' + EQUALITY caseIgnoreIA5Match + SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 + SINGLE-VALUE ) + + ( DUAConfSchemaOID.1.11 NAME 'objectclassMap' + DESC 'Objectclass mappings used by a DUA' + EQUALITY caseIgnoreIA5Match + SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) + + ( DUAConfSchemaOID.1.12 NAME 'defaultSearchScope' + DESC 'Default search scope used by a DUA' + EQUALITY caseIgnoreIA5Match + SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 + SINGLE-VALUE ) + + ( DUAConfSchemaOID.1.13 NAME 'serviceCredentialLevel' + DESC 'Identifies type of credentials a DUA + should use when binding to the LDAP server for a + specific service' + EQUALITY caseIgnoreIA5Match + SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) + + ( DUAConfSchemaOID.1.15 NAME 'serviceAuthenticationMethod' + DESC 'Authentication method used by a service of the DUA' + EQUALITY caseIgnoreMatch + + + +Joslin [Page 6] + +Internet-Draft DUA Configuration Schema October 2002 + + + SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 ) + + +4. Class Definition + + The objectclass below is constructed from the attributes defined in + 3, with the exception of the cn attribute, which is defined in RFC + 2256 [8]. cn is used to represent the name of the DUA configura- + tion profile. + + ( DUAConfSchemaOID.2.5 NAME 'DUAConfigProfile' + SUP top STRUCTURAL + DESC 'Abstraction of a base configuration for a DUA' + MUST ( cn ) + MAY ( defaultServerList $ preferredServerList $ + defaultSearchBase $ defaultSearchScope $ + searchTimeLimit $ bindTimeLimit $ + credentialLevel $ authenticationMethod $ + followReferrals $ dereferenceAliases $ + serviceSearchDescriptor $ serviceCredentialLevel $ + serviceAuthenticationMethod $ objectclassMap $ + attributeMap $ profileTTL ) ) + + +5. Implementation Details + +5.1.1 Interpreting the preferredServerList attribute + + Interpretation: + + As described by the syntax, the preferredServerList parameter + is a white-space separated list of server addresses and asso- + ciated port numbers. When the DUA needs to contact a DSA, the + DUA MUST first attempt to contact one of the servers listed in + the preferredServerList attribute. The DUA MUST contact the + DSA specified by the first server address in the list. If + that DSA is unavailable, the remaining DSAs MUST be queried in + the order provided until a connection is established with a + DSA. Once a connection with a DSA is established, the DUA + SHOULD NOT attempt to establish a connection with the remain- + ing DSAs. + + If the DUA is unable to contact any of the DSAs specified by + the preferredServerList, the defaultServerList attribute MUST + be examined, as described in 5.1.2. The servers identified by + the preferredServerList MUST be contacted before attempting to + contact any of the servers specified by the defaultServerList. + + + + +Joslin [Page 7] + +Internet-Draft DUA Configuration Schema October 2002 + + + Syntax: + + serverList = host *(space [host]) + + Default Value: + + The preferredServerList attribute does not have a default + value. Instead a DUA MUST examine the defaultServerList + attribute. + + Other attribute notes: + + This attribute is used in conjunction with the defaultServer- + List attribute. Please see section 5.1.2 for additional + implementation notes. Determining how the DUA should query + the DSAs also depends on the additional configuration attri- + butes, credentialLevel, serviceCredentialLevel, bindTimeLimit, + serviceAuthenticationMethod and authenticationMethod. Please + review section 5.2 for details on how a Posix DUA should prop- + erly bind to a DSA. + + Example: + + preferredServerList: 1.2.3.4 ldap1.mycorp.com ldap2:1389 + [1080::8:800:200C:417A]:1389 + +5.1.2 Interpreting the defaultServerList attribute + + Interpretation: + + The defaultServerList attribute MUST only be examined if the + preferredServerList attribute is not provided, or the DUA is + unable to establish a connection with one of the DSAs speci- + fied by the preferredServerList. + + If more than one address is provided, the DUA may choose to + either accept the order provided, or choose to create its own + order, based on what the DUA determines is the "best" order of + servers to query. For example, the DUA may choose to examine + the server list and choose to query the DSAs in order based on + the "closest" server or the server with the least amount of + "load." Interpretation of the "best" server order is entirely + up to the DUA, and not part of this document. + + Once the order of server addresses is determined, the DUA con- + tacts the DSA specified by the first server address in the + list. If that DSA is unavailable, the remaining DSAs SHOULD + be queried until an available DSA is found or no more DSAs are + + + +Joslin [Page 8] + +Internet-Draft DUA Configuration Schema October 2002 + + + available. If a server address or port is invalid, the DUA + SHOULD proceed to the next server address as described just + above. + + Syntax: + + serverList = host *(space [host]) + + Default Value: + + If a defaultServerList attribute is not provided, the DUA + should xxx attempt to contact the same DSA that provided the + configuration profile entry itself. The default DSA is con- + tacted only if the preferredServerList attribute is also not + provided. + + Other attribute notes: + + This attribute is used in conjunction with the preferredSer- + verList attribute. Please see section 5.1.1 for additional + implementation notes. Determining how the DUA should query + the DSAs also depends on the additional configuration attri- + butes, credentialLevel, serviceCredentialLevel, bindTimeLimit, + serviceAuthenticationMethod and authenticationMethod. Please + review section 5.2 for details on how a DUA should properly + contact a DSA. + + Example: + + defaultServerList: 1.2.3.4 ldap1.mycorp.com ldap2:1389 + [1080::8:800:200C:417A]:1389 + +5.1.3 Interpreting the defaultSearchBase attribute + + Interpretation: + + When a DUA needs to search the DSA for information, this + attribute provides the "base" for the search. This parameter + can be overridden or appended by the serviceSearchDescriptor + attribute. See section 5.1.6. + + Syntax: + + Defined by OID 1.3.6.1.4.1.1466.115.121.1.12 + + Default Value: + + There is no default value for the defaultSearchBase. A DUA + + + +Joslin [Page 9] + +Internet-Draft DUA Configuration Schema October 2002 + + + MAY define its own method for determining the search base, if + the defaultSearchBase is not provided. + + Other attribute notes: + + This attribute is used in conjunction with the serviceSear- + chDescriptor attribute. See section 5.1.6. + + Example: + + defaultSearchBase: dc=mycompany,dc=com + +5.1.4 Interpreting the authenticationMethod attribute + + Interpretation: + + The authenticationMethod attribute defines an ordered list of + LDAP bind methods to be used when attempting to contact a + DSA[1]. The serviceAuthenticationMethod overrides this value + for a particular service (see 5.1.15.) Each method MUST be + attempted in the order provided by the attribute, until a suc- + cessful LDAP bind is performed ("none" is assumed to always be + successful.) However the DUA MAY skip over one or more + methods. See section 5.2 for more information. + + none - The DUA does not perform an LDAP bind. + simple - The DUA performs an LDAP simple bind. + sasl - The DUA performs an LDAP SASL bind using the + specified SASL mechanism and options. + tls - The DUA performs an LDAP StartTLS operation + followed by the specified bind method (for more + information refer to section 5.1 of RFC 2830 [12]). + + Syntax: + + authMethod = method *(";" method) + method = none | simple | sasl | tls + none = "none" + simple = "simple" + sasl = "sasl/" saslmech [ ":" sasloption ] + sasloption = "auth-conf" | "auth-int" + tls = "tls:" (none | simple | sasl) + saslmech = SASL mechanism name as defined in + RFC 2222[7], section 3 + + Note: Although multiple authentication methods may be speci- + fied in the syntax, at most one of each type is allowed. + + + + +Joslin [Page 10] + +Internet-Draft DUA Configuration Schema October 2002 + + + Default Value: + + If the authenticationMethod or serviceAuthenticationMethod + (for that particular service) attributes are not provided, the + DUA MAY choose to bind to the DSA using any method defined by + the DUA. However, if either authenticationMethod or servi- + ceAuthenticationMethod are provided, the DUA MUST only use the + methods specified. + + Other attribute notes: + + When using TLS, the string "tls:sasl/EXTERNAL" implies that + two way authentication is to be performed. Any other TLS + authentication method implies one way (DSA side credential) + authentication. + + Determining how the DUA should bind to the DSAs also depends + on the additional configuration attributes, credentialLevel, + serviceCredentialLevel, serviceAuthenticationMethod and + bindTimeLimit. Please review section 5.2 for details on how + to properly bind to a DSA. + + Example: + + authenticationMethod: tls:simple;sasl/DIGEST-MD5 + (see [11]) + +5.1.5 Interpreting the credentialLevel attribute + + Interpretation: + + The credentialLevel attribute defines what type(s) of + credential(s) the DUA SHOULD use when contacting the DSA. The + serviceCredentialLevel overrides this value for a particular + service (5.1.16.) The credentialLevel can contain more than + one credential type, separated by white space. + + anonymous - The DUA SHOULD NOT use a credential when binding + to the DSA. + + proxy - The DUA SHOULD use a known proxy identity when binding + to the DSA. A proxy identity is a specific credential that + was created to represent the DUA. This document does not + define how the proxy user should be created, or how the DUA + should determine what the proxy user's credential is. This + functionality is up to each implementation. + + self - When the DUA is acting on behalf of a "real user" the + + + +Joslin [Page 11] + +Internet-Draft DUA Configuration Schema October 2002 + + + DUA SHOULD attempt to bind to the DSA as that user. The DUA + SHOULD map the user's identity to a credential used in the + directory. + + If the credentialLevel contains more than one credential type, + the DUA MUST use the credential types in the order specified. + However, the DUA MAY skip over one or more credential types. + As soon as the DUA is able to successfully bind to the DSA, + the DUA SHOULD NOT attempt to bind using the remaining creden- + tial types. + + Syntax: + + credentialLevel = level *(space level) + level = self | proxy | anonymous + self = "self" + proxy = "proxy" + anonymous = "anonymous" + + Note: Although multiple credential levels may be specified in + the syntax, at most one of each type is allowed. Refer to + implementation notes in section 5.2 for additional syntax + requirements for the credentialLevel attribute. + + Default Value: + + If the credentialLevel attribute is not defined, the DUA + SHOULD NOT use a credential when binding to the DSA (also + known as anonymous.) + + Other attribute notes: + + Determining how the DUA should bind to the DSAs also depends + on the additional configuration attributes, authentication- + Method, serviceAuthenticationMethod, serviceCredentialLevel + and bindTimeLimit. Please review section 5.2 for details on + how to properly bind to a DSA. + + Example: + + credentialLevel: proxy anonymous + +5.1.6 Interpreting the serviceSearchDescriptor attribute + + Interpretation: + + The serviceSearchDescriptor attribute defines how and where a + DUA SHOULD search for information for a particular service. + + + +Joslin [Page 12] + +Internet-Draft DUA Configuration Schema October 2002 + + + The serviceSearchDescriptor contains a serviceID, followed by + one or more base-scope-filter triples. These base-scope- + filter triples are used to define searches only for the + specific service. Multiple base-scope-filters allow the DUA + to search for data in multiple locations of the DIT. Although + this syntax is very similar to the LDAP URL[6], this draft + requires the ability to supply multiple hosts as part of the + configuration of the DSA. In addition, an ordered list of + search descritors is required, which can not be specified by + the LDAP URL. + + In addition to the triples, serviceSearchDescriptor might also + contain the DN of an entry that will contain an alternate pro- + file. The DSA SHOULD re-evaluate the alternate profile and + perform searches as specified by that profile. + + If the base, as defined in the serviceSearchDescriptor, is + followed by the "," (ASCII 0x2C) character, this base is known + as a relative base. This relative base may be constructed of + one or more RDN components. The DUA MUST define the search + base by appending the relative base with the defaultSear- + chBase. + + Syntax: + + serviceSearchList = serviceID ":" serviceSearchDesc + *(";" serviceSearchDesc) + serviceSearchDesc = confReferral | searchDescriptor + searchDescriptor = [base] ["?" [scope] ["?" [filter]]] + confReferral = "ref:" DistinguishedName + base = DistinguishedName | + RelativeBaseName + RelativeBaseName = 1*(RelativeDistinguishedName ",") + filter = UTF-8 encoded string + + If the base or filter contains the ";" (ASCII 0x3B) "?" (ASCII + 0x3F) """ (ASCII 0x22) or "\" (ASCII 0x5C) characters, those + characters MUST be escaped (preceded with the "\" character.) + Alternately the DN may be surrounded by quotes (ASCII 0x22.) + Refer to RFC 2253, section 4. If the base or filter are sur- + rounded by quotes, only the """ character needs to be escaped. + Any character that is preceded by the "\" character, which + does not need to be escaped results in both "\" character and + the character itself. + + The usage and syntax of the filter string MUST be defined by + the DUA service. A suggested syntax would be that as defined + by RFC 2254. + + + +Joslin [Page 13] + +Internet-Draft DUA Configuration Schema October 2002 + + + If a DUA is performing a search for a particular service, + which has a serviceSearchDescriptor defined, the DUA MUST set + the base, scope and filter as defined. Each base-scope-filter + triple represents a single LDAP search operation. If multiple + base-scope-filter triples are provided in the serviceSear- + chDescriptor, the DUA SHOULD perform multiple search requests + and in that case it MUST be in the order specified by the ser- + viceSearchDescriptor. + + FYI: Service search descriptors do not exactly follow the LDAP + URL syntax [5]. The reasoning for this difference is to + separate the host name(s) from the filter. This allows the + DUA to have a more flexible solution in choosing its provider. + + Default Values: + + If a serviceSearchDescriptor, or an element their-of, is not + defined for a particular service, the DUA SHOULD create the + base, scope and filter as follows: + + base - Same as the defaultSearchBase or as + defined by the DUA service. + scope - Same as the defaultSearchScope or as + defined by the DUA service. + filter - Use defaults as defined by DUAs service. + + If the defaultSearchBase or defaultSearchScope are not + defined, then the DUA service may use its own default. + + + Other attribute notes: + + If a serviceSearchDescriptor exists for a given service, the + service MUST use at least one base-scope-filter triple in per- + forming searches. It SHOULD perform multiple searches per + service if multiple base-scope-filter triples are defined for + that service. + + The details of how the "filter" is interpreted by each DUA's + service is defined by that service. This means the filter is + NOT REQUIRED to be a legal LDAP filter [4]. Furthermore, + determining how attribute and objectclass mapping affects that + search filter MUST be defined by the service. I.E. The DUA + SHOULD specify if the filter has been assumed to already have + been mapped, or if it is expected that mapping would be + applied to the filter. In general practice, implementation + and usability suggests that attribute and objectclass mapping + (sections 5.1.7 and 5.1.13) SHOULD NOT be applied to the + + + +Joslin [Page 14] + +Internet-Draft DUA Configuration Schema October 2002 + + + filter defined in the serviceSearchDescriptor. + + It is assumed the serviceID is unique to a given service + within the scope of any DUA that might use the given profile. + + Example: + + defaultSearchBase: dc=mycompany,dc=com + + serviceSearchDescriptor: email:ou=people,ou=org1,? + one;ou=contractor,?one; + ref:cn=profile,dc=mycompany,dc=com + + In this example, the DUA MUST search in + "ou=people,ou=org1,dc=mycompany,dc=com" first. The DUA then + SHOULD search in "ou=contractor,dc=mycompany,dc=com", and + finally it SHOULD search other locations as specified in the + profile described at "cn=profile,dc=mycompany,dc=com". For + more examples, see section 9. + + +5.1.7 Interpreting the attributeMap attribute + + Interpretation: + + A DUA SHOULD perform attribute mapping for all LDAP operations + performed for a service that has an attributeMap entry. + Because attribute mapping is specific to each service within + the DUA, a "serviceID" is required as part of the attributeMap + syntax. I.E. not all DUA services should necessarily perform + the same attribute mapping. + + Attribute mapping in general is expected be used to map attri- + butes of similar syntaxes as specified by the service sup- + ported by the DUA. However, a DUA is NOT REQUIRED to verify + syntaxes of mapped attributes. If the DUA does discover that + the syntax of the mapped attribute does not match that of the + original attribute, the DUA MAY perform translation between + the original syntax and the new syntax. When DUAs do support + attribute value translation, the list of capabable transla- + tions SHOULD be documented in a description of the DUA ser- + vice. + + Syntax: + + attributeMap = serviceID ":" origAttribute "=" + attributes + origAttribute = attribute + + + +Joslin [Page 15] + +Internet-Draft DUA Configuration Schema October 2002 + + + attributes = wattribute *( space wattribute ) + wattribute = whsp newAttribute whsp + newAttribute = descr | "*NULL*" + attribute = descr + + Values of the origAttribute are defined by and SHOULD be docu- + mented for the DUA service, as a list of known supported + attributes. + + Default Value: + + By default, attributes that are used by a DUA service are not + mapped unless mapped by the attributeMap attributes. The DUA + MUST NOT map an attribute unless it is explicitly defined by + an attributeMap attribute. + + Other attribute notes: + + When an attribute is mapped to the special keystring "*NULL*", + the DUA SHOULD NOT request that attribute from the DSA, when + performing a search or compare request. If the DUA is also + capable of performing modification on the DSA, the DUA SHOULD + NOT attempt to modify any attribute which has been mapped to + "*NULL*". + + It is assumed the serviceID is unique to a given service + within the scope of the DSA. + + A DUA SHOULD support attribute mapping. If it does, the fol- + lowing additional rules apply: + + 1) The list of attributes that are allowed to be mapped SHOULD + defined by and documented for the service. + + 2) Any supported translation of mapping from attributes of + dissimilar syntax SHOULD also be defined and documented. + + 3) If an attribute may be mapped to multiple attributes the + DSA SHOULD define a syntax or usage statement for how the new + attribute value will be evaluated. Furthermore, the resulting + translated syntax of the combined attributes MUST be the same + as the attribute being mapped. + + 4) A DUA MUST support mapping of attributes using the attri- + bute OID. It SHOULD support attribute mapping based on the + attribute name. + + 5) It is recommended that attribute mapping not be applied to + + + +Joslin [Page 16] + +Internet-Draft DUA Configuration Schema October 2002 + + + parents of the target entries. + + 6) Attribute mapping is not recursive. In other words, if an + attribute has been mapped to a target attribute, that new tar- + get attribute MUST NOT be mapped to a third attribute. + + 7) A given attribute MUST only be mapped once for a given ser- + vice. + + + Example: + + Suppose a DUA is acting on behalf of an email service. By + default the "email" service uses the "mail", "cn" and "sn" + attributes to discover mail addresses. However, the email + service has been deployed in an environment that uses "employ- + eeName" instead of "cn." And also instead of using the "mail" + attribute for email addresses, the "email" attribute is used + for that purpose. In this case, the attribute "cn" can be + mapped to "employeeName," allowing the DUA to perform searches + using the "employeeName" attribute as part of the search + filter, instead of "cn". And "mail" can be mapped to "email" + when attempting to retrieve the email address. This mapping + is performed by adding the attributeMap attributes to the con- + figuration profile entry as follows (represented in LDIF[18]): + + attributeMap: email:cn=employeeName + attributeMap: email:mail=email + + As described above, the DUA MAY also map a single attribute to + multiple attributes. When mapping a single attribute to more + than one attribute, the new syntax or usage of the mapped + attribute must be intrinsically defined by the DUAs service. + + attributeMap: email:cn=firstName lastName + + In the above example, the DUA creates the new value by gen- + erating space separated string using the values of the mapped + attributes. In this case, a special mapping must be defined + so that a proper search filter can be created. For further + information on this example, please refer to section 9. + + Another possibility for multiple attribute mapping might come + in when constructing returned attributes. For example, + perhaps all email addresses are of a guaranteed syntax of + "uid@domain". And in this example, the uid and domain are + separate attributes in the directory. The email service may + define that if the "mail" attribute is mapped to two different + + + +Joslin [Page 17] + +Internet-Draft DUA Configuration Schema October 2002 + + + attributes, it will construct the email address as a concate- + nation of the uid and domain attributes, placing the "@" char- + acter between them. + + attributeMap: email:mail=uid domain + + +5.1.8 Interpreting the searchTimeLimit attribute + + Interpretation: + + The searchTimeLimit attribute defines the maximum time, in + seconds, that a DUA SHOULD allow to perform a search request. + + Syntax: + + Defined by OID 1.3.6.1.4.1.1466.115.121.1.27. + + Default Value: + + If the searchTimeLimit attribute is not defined or is zero, + the search time limit is not enforced by the DUA. + + Other attribute notes: + + This time limit only includes the amount of time required to + perform the LDAP search operation. If other operations are + required, those operations do not need to be considered part + of the search time. See bindTimeLimit for the LDAP bind + operation. + +5.1.9 Interpreting the bindTimeLimit attribute + + Interpretation: + + The bindTimeLimit attribute defines the maximum time, in + seconds, that a DUA SHOULD allow to perform an LDAP bind + request against each server on the preferredServerList or + defaultServerList. + + Syntax: + + Defined by OID 1.3.6.1.4.1.1466.115.121.1.27. + + Default Value: + + If the bindTimeLimit attribute is not defined or is zero, the + bind time limit is not enforced by the DUA. + + + +Joslin [Page 18] + +Internet-Draft DUA Configuration Schema October 2002 + + + Other attribute notes: + + This time limit only includes the amount of time required to + perform the LDAP bind operation. If other operations are + required, those operations do not need to be considered part + of the bind time. See searchTimeLimit for the LDAP search + operation. + +5.1.10 Interpreting the followReferrals attribute + + Interpretation: + + If set to TRUE, the DUA SHOULD follow any referrals if + discovered. + + If set to FALSE, the DUA MUST NOT follow referrals. + + Syntax: + + Defined by OID 1.3.6.1.4.1.1466.115.121.1.7. + + Default Value: + + If the followReferrals attribute is not set or set to an + invalid value the default value is TRUE. + +5.1.11 Interpreting the dereferenceAliases attribute + + Interpretation: + + If set to TRUE, the DUA SHOULD enable alias dereferening. + + If set to FALSE, the DUA MUST NOT enable alias dereferencing. + + Syntax: + + Defined by OID 1.3.6.1.4.1.1466.115.121.1.7. + + Default Value: + + If the dereferenceAliases attribute is not set or set to an + invalid value the default value is TRUE. + +5.1.12 Interpreting the profileTTL attribute + + Interpretation: + + The profileTTL attribute defines how often the DUA SHOULD re- + + + +Joslin [Page 19] + +Internet-Draft DUA Configuration Schema October 2002 + + + load and reconfigure itself using the corresponding configura- + tion profile entry. The value is represented in seconds. + Once a DUA reloads the profile entry, it SHOULD re-configure + itself with the new values. + + Syntax: + + Defined by OID 1.3.6.1.4.1.1466.115.121.1.27. + + Default Value: + + If not specified the DUA MAY use its own reconfiguration pol- + icy. + + Other attribute notes: + + If the profileTTL value is zero, the DUA SHOULD NOT automati- + cally re-load the configuration profile. + +5.1.13 Interpreting the objectclassMap attribute + + Interpretation: + + A DUA MAY perform objectclass mapping for all LDAP operations + performed for a service that has an objectclassMap entry. + Because objectclass mapping is specific for each service + within the DUA, a "serviceID" is required as part of the + objectclassMap syntax. I.E. Not all DUA services should + necessarily perform the same objectclass mapping. + + Objectclass mapping SHOULD be used in conjunction with attri- + bute mapping to map the required schema by the service to an + equivalent schema that is available in the directory. + + Objectclass mapping may or may not be required by a DUA. In + general, the objectclass attribute is used primarily in search + filters. If a service search descriptor is provided, it is + expected that the search filter contains a "correct" search + filter (though this is not a requirement,) which does not need + to be re-mapped. However, when the service search descriptor + is not provided, and the default search filter for that ser- + vice contains the objectclass attribute, that search filter + SHOULD be re-defined by objectclass mapping. If a default + search filter is not used, it SHOULD be re-defined through the + serviceSearchDescriptor. If a serviceSearchDescriptor is + defined for a particular service, it SHOULD NOT be re-mapped + by either the objectclassMap or attributeMap values. + + + + +Joslin [Page 20] + +Internet-Draft DUA Configuration Schema October 2002 + + + One condition where the objectclassMap SHOULD be used is when + the DUA is providing gateway functionality. In this case, the + DUA is acting on behalf of another service, which may pass in + a search filter itself. In this type of DUA, the DUA may + alter the search filter according to the appropriate attribu- + teMap and objectclassMap values. And in this case, it is also + assumed that a serviceSearchDescriptor is not defined. + + Syntax: + + objectclassMap = serviceID ":" origObjectclass "=" + objectclass + origObjectclass = objectclass + objectclass = keystring + + Values of the origObjectclass depend on the type of DUA Ser- + vice using the objectclass mapping feature. + + Default Value: + + The DUA MUST NOT remap an objectclass unless it is explicitly + defined by an objectclassMap attribute. + + Other attribute notes: + + A DUA SHOULD support objectclass mapping. If it does, the DUA + MUST support mapping of objectclasses using the objectclass + OID. It SHOULD support objectclass mapping based on the + objectclass name. + + It is assumed the serviceID is unique to a given service + within the scope of the DSA. + + Example: + + Suppose a DUA is acting on behalf of an email service. By + default the "email" service uses the "mail", "cn" and "sn" + attributes to discover mail addresses in entries created using + inetOrgPerson objectclass [16]. However, the email service + has been deployed in an environment that uses entries created + using "employee" objectclass. In this case, the attribute + "cn" can be mapped to "employeeName", and "inetOrgPerson" can + be mapped to "employee", allowing the DUA to perform LDAP + operations using the entries that exist in the directory. + This mapping is performed by adding attributeMap and + objectclassMap attributes to the configuration profile entry + as follows (represented in LDIF[18]): + + + + +Joslin [Page 21] + +Internet-Draft DUA Configuration Schema October 2002 + + + attributeMap: email:cn=employeeName + objectclassMap: email:inetOrgPerson=employee + + +5.1.14 Interpreting the defaultSearchScope attribute + + Interpretation: + + When a DUA needs to search the DSA for information, this + attribute provides the "scope" for the search. This parameter + can be overridden by the serviceSearchDescriptor attribute. + See section 5.1.6. + + Syntax: + + scopeSyntax = "base" | "one" | "sub" + + Default Value: + + The default value for the defaultSearchScope SHOULD be defined + by the DUA service. If the default search scope for a service + is not defined then the scope SHOULD be for the DUA to perform + a subtree search. + + +5.1.15 Interpreting the serviceAuthenticationMethod attribute + + Interpretation: + + The serviceAuthenticationMethod attribute defines an ordered + list of LDAP bind methods to be used when attempting to con- + tact a DSA for a particular service. Interpretation and use + of this attribute is the same as 5.1.4, but specific for each + service. + + Syntax: + + svAuthMethod = service ":" method *(";" method) + + Note: Although multiple authentication methods may be speci- + fied in the syntax, at most one of each type is allowed. + + Default Value: + + If the serviceAuthenticationMethod attribute is not provided, + the authenticationMethod SHOULD be followed, or its default. + + Other attribute notes: + + + +Joslin [Page 22] + +Internet-Draft DUA Configuration Schema October 2002 + + + Determining how the DUA should bind to the DSAs also depends + on the additional configuration attributes, credentialLevel, + serviceCredentialLevel and bindTimeLimit. Please review sec- + tion 5.2 for details on how to properly bind to a DSA. + + Example: + + serviceAuthenticationMethod: email:tls:simple;sasl/DIGEST-MD5 + + +5.1.16 Interpreting the serviceCredentialLevel attribute + + Interpretation: + + The serviceCredentialLevel attribute defines what type(s) of + credential(s) the DUA SHOULD use when contacting the DSA for a + particular service. Interpretation and used of this attribute + are the same as 5.1.5. + + Syntax: + + svCredentialLevel = service ":" level *(space level) + + Refer to implementation notes in section 5.2 for additional + syntax requirements for the credentialLevel attribute. + + Note: Although multiple credential levels may be specified in + the syntax, at most one of each type is allowed. + + Default Value: + + If the serviceCredentialLevel attribute is not defined, the + DUA MUST examine the credentialLevel attribute, or follow its + default if not provided. + + Other attribute notes: + + Determining how the DUA should bind to the DSAs also depends + on the additional configuration attributes, serviceAuthentica- + tionMethod, authenticationMethod and bindTimeLimit. Please + review section 5.2 for details on how to properly bind to a + DSA. + + Example: + + serviceCredentialLevel: email:proxy anonymous + + + + + +Joslin [Page 23] + +Internet-Draft DUA Configuration Schema October 2002 + + +5.2 Binding to the Directory Server + + The DUA SHOULD use the following algorithm when binding to the + server: + + for (clevel in credLevel) [see note 1] + if (clevel is "anonymous") + for (host in hostnames) [see note 2] + if (server is responding) + return success + return failure + else + for (amethod in authMethod) [see note 3] + if (amethod is none) + for (host in hostnames) + if (server is responding) + return success + return failure + else + for (host in hostnames) + authenticate using amethod and clevel + if (authentication passed) + return success + return failure + + Note 1: The credLevel is a list of credential levels as defined + in serviceCredentialLevel (section 5.1.16) for a given + service. If the serviceCredentialLevel is not defined, + the DUA MUST examine the credentialLevel attribute. + + Note 2: hostnames is the list of servers to contact as defined + in 5.1.1 & 5.1.2. + + Note 3: The authMethod a list of authentication methods as defined + in serviceAuthenticationMethod (section 5.1.15) for a + given service. If the serviceAuthenticationMethod is not + defined, the DUA MUST examine the authenticationMethod + attribute. + + + +6. Security Considerations + + The profile entries MUST be protected against unauthorized modifi- + cation. Since the profile is most useful if its content is avail- + able broadly, it is recommended that the profile entries will be + readable anonymously. However, ultimately each service needs to + consider implications of providing its service configuration as + + + +Joslin [Page 24] + +Internet-Draft DUA Configuration Schema October 2002 + + + part of this profile and limit access to the profile entries + accordingly. Additionally, the management of the authentication + credentials for the DUA is outside the scope of this document and + needs to be handled by the DUA. + + The algorithm described by section 5.2 also has security considera- + tions. Altering that design will alter the security aspectes of + the configuration profile. + + +7. Acknowledgments + + There were several additional authors of this document. However we + chose to represent only one author per company in the heading. + From Sun we also would like to acknowledge Roberto Tam for his + design work on Sun's first LDAP name service product and his input + for this document. From Hewlett-Packard we'd like to acknowledge + Dave Binder for his work architecting Hewlett-Packard's LDAP name + service product as well as his design guidance on this document. + We'd also like to acknowledge Grace Lu from HP, for her input and + implementation of HP's configuration profile manager code. + + +8. References + +[1] + M. Wahl, H. Alvestrand, J. Hodges, R. Morgan, "Authentication + Methods for LDAP", RFC 2828, May 2000 + +[2] + M. Wahl, A. Coulbeck, T. Howes, S. Kille, "Lightweight Directory + Access Protocol (v3): Attribute Syntax Definitions", RFC 2252, + December 1997. + +[3] + M. Wahl, S. Kille, T. Howes, "Lightweight Directory Access Protocol + (v3): UTF-8 String Representation of Distinguished Names", RFC + 2253, December 1997. + +[4] + T. Howes, "The String Representation of LDAP Search Filters", RFC + 2254, December 1997. + +[5] + T. Howes, M. Smith, "The LDAP URL Format", RFC 2255, December 1997. + +[6] + T. Berners-Lee, L. Masinter, M. McCahill, "Uniform Resource + + + +Joslin [Page 25] + +Internet-Draft DUA Configuration Schema October 2002 + + + Locators (URL)", RFC 1738, December 1994. + +[7] + J. Meyers, "Simple Authentication and Security Layer [SASL]", RFC + 2222, October 1997 + +[8] + M. Wahl, "A Summary of the X.500(96) User Schema for use with + LDAPv3", RFC 2256, December 1997. + +[9] + T. Berners-Lee, R. Fielding, R. Fielding, "Uniform Resource Iden- + tifiers (URI): Generic Syntax", RFC 2396, August 1998. + +[10] + R. Hinden, B. Carpenter, L. Masinter, "Format for Literal IPv6 + Addresses in URL's, RFC 2732, December 1999. + +[11] + P. Leach, C. Newman, "Using Digest Authentication as a SASL Mechan- + ism", RFC 2831, May 2000 + +[12] + J. Hodges, R. Morgan, M. Wahl, "Lightweight Directory Access Proto- + col [v3]: Extension for Transport Layer Security", RFC 2830, May + 2000 + +[13] + Microsoft Corporation, "Services for Unix 2.0", + http://www.microsoft.com/WINDOWS2000/sfu/default.asp + +[14] + L. Howard, "An Approach for Using LDAP as a Network Information + Service", RFC 2307, March 1998. + +[15] + S. Bradner, "Key Words for use in RFCs to Indicate Requirement Lev- + els", RFC 2119, March 1997. + +[16] + M. Smith, "Definition of the inetOrgPerson LDAP Object Class", RFC + 2789, April 2000 + +[17] + M. Wahl, T. Howes, S. Kille, "Lightweight Directory Access Protocol + (v3)", RFC 2251, December 1997. + +[18] + + + +Joslin [Page 26] + +Internet-Draft DUA Configuration Schema October 2002 + + + G. Good, "The LDAP Data Interchange Format (LDIF) - Technical + Specification", RFC 2849, June 2000. + + +9. Examples + + In this section we will describe a fictional DUA which provides one + service, called the "email" service. This service would be similar + to an email client that uses an LDAP directory to discover email + addresses based on a textual representation of the recipient's col- + loquial name. + + This email service is defined by default to expect that users with + email addresses will be of the "inetOrgPerson" objectclass type + [16]. And by default, the "email" service expects the colloquial + name to be stored in the "cn" attribute, while it expects the email + address to be stored in the "mail" attribute (as one would expect + as defined by the inetOrgPerson objectclass.) + + As a special feature, the "email" service will perform a special + type of attribute mapping, when performing searches. If the "cn" + attribute has been mapped to two or more attributes, the "email" + service will parse the requested search string and map each white- + space separated token into the mapped attributes, respectively. + + The default search filter for the "email" service is + "(objectclass=inetOrgPerson)". The email service also defines that + when it performs a name to address discovery, it will wrap the + search filter inside a complex search filter as follows: + + (&()(cn~=) + + or if "cn" has been mapped to multiple attributes, that wrapping + would appear as follows: + + (&()(attr1~=)(attr2~=)...) + + The below examples show how the "email" service builds it search + requests, based on the defined profile. In all cases, the + defaultSearchBase is "o=airius.com" and the defaultSearchScope is + undefined. + + In addition, for all examples, we assume that the "email" service + has been requested to discover the email address for "Jane Hernan- + dez." + + + Example 1: + + + +Joslin [Page 27] + +Internet-Draft DUA Configuration Schema October 2002 + + + serviceSearchDescriptor: email:"ou=marketing," + + base: ou=marketing,o=airius.com + scope: sub + filter: (&(objectclass=inetOrgPerson)(cn~=Jane Hernandez)) + + Example 2: + + serviceSearchDescriptor: email:"ou=marketing,"?one? + (&(objectclass=inetOrgPerson)(c=us)) + attributeMap: email:cn=2.5.4.42 sn + + Note: 2.5.4.42 is the OID that represents the "givenName" + attribute. + + In this example, the email service performs parsing + as described above to generate a complex search filter. The above + example results in one search. + + base: ou=marketing,o=airius.com + scope: one + filter: (&(&(objectclass=inetOrgPerson)(c=us)) + (2.5.4.42~=Jane)(sn~=Hernandez)) + + Example 3: + + serviceSearchDescriptor: email:ou=marketing,"?base + attributeMap: email:cn=name + + This example is invalid, because either the quote should have been + escaped, or there should have been a leading quote. + + Example 4: + + serviceSearchDescriptor: email:ou=\mar\\keting,\"?base + attributeMap: email:cn=name + + base: ou=\mar\keting," + scope: base + filter (&(objectclass=inetOrgPerson)(name~=Jane Hernandez)) + + Example 5: + + serviceSearchDescriptor: email:ou="marketing",o=supercom + + This example is invalid, since the quote was not a leading quote, + and thus should have been escaped. + + + + +Joslin [Page 28] + +Internet-Draft DUA Configuration Schema October 2002 + + + Example 6: + + serviceSearchDescriptor: email:??(&(objectclass=person) + (ou=Org1 \\(temporary\\))) + + base: o=airius.com + scope: sub + filter: (&((&(objectclass=person)(ou=Org1 \(Temporary\))) + (cn~=Jane Henderson))) + + Example 7: + + serviceSearchDescriptor: email:"ou=funny?org," + + base: ou=funny?org,o=airius.com + scope: sub + filter (&(objectclass=inetOrgPerson)(cn~=Jane Hernandez)) + + +10. Author's Addresses + + Luke Howard + PADL Software Pty. Ltd. + PO Box 59 + Central Park Vic 3145 + Australia + + EMail: lukeh@padl.com + + + Bob Joslin + Hewlett-Packard Company + 19420 Homestead RD MS43-LF + Cupertino, CA 95014 + USA + + Phone: +1 408 447-3044 + EMail: bob_joslin@hp.com + + + Morteza Ansari + Sun Microsystems, Inc. + 901 San Antonio RD MS MPK17-203 + Palo Alto, CA 94303 + USA + + Phone: +1 650 786-6178 + EMail: morteza.ansari@sun.com + + + +Joslin [Page 29] + +Internet-Draft DUA Configuration Schema October 2002 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Joslin [Page 30] + diff --git a/servers/slapd/schema/duaconf.schema b/servers/slapd/schema/duaconf.schema new file mode 100644 index 0000000000..dba8d15d61 --- /dev/null +++ b/servers/slapd/schema/duaconf.schema @@ -0,0 +1,224 @@ +## This work is part of OpenLDAP Software . +## +## Copyright 1998-2004 The OpenLDAP Foundation. +## All rights reserved. +## +## Redistribution and use in source and binary forms, with or without +## modification, are permitted only as authorized by the OpenLDAP +## Public License. +## +## A copy of this license is available in the file LICENSE in the +## top-level directory of the distribution or, alternatively, at +## . + +## Notes: +## - The matching rule for attributes followReferrals and dereferenceAliases +## has been changed to booleanMatch since their syntax is boolean +## - There was a typo in the name of the dereferenceAliases attributeType +## in the DUAConfigProfile objectClass definition +## - Credit goes to the original Authors + +# +# Application Working Group M. Ansari +# INTERNET-DRAFT Sun Microsystems, Inc. +# Expires Febuary 2003 L. Howard +# PADL Software Pty. Ltd. +# B. Joslin [ed.] +# Hewlett-Packard Company +# +# September 15th, 2003 +# Intended Category: Informational +# +# +# A Configuration Schema for LDAP Based +# Directory User Agents +# +# +# +# Abstract +# +# This document describes a mechanism for global configuration of +# similar directory user agents. This document defines a schema for +# configuration of these DUAs that may be discovered using the Light- +# weight Directory Access Protocol in RFC 2251[17]. A set of attri- +# bute types and an objectclass are proposed, along with specific +# guidelines for interpreting them. A significant feature of the +# global configuration policy for DUAs is a mechanism that allows +# DUAs to re-configure their schema to that of the end user's +# environment. This configuration is achieved through attribute and +# objectclass mapping. This document is intended to be a skeleton +# for future documents that describe configuration of specific DUA +# services. +# +# +# [trimmed] +# +# +# 2. General Issues +# +# The schema defined by this document is defined under the "DUA Con- +# figuration Schema." This schema is derived from the OID: iso (1) +# org (3) dod (6) internet (1) private (4) enterprises (1) Hewlett- +# Packard Company (11) directory (1) LDAP-UX Integration Project (3) +# DUA Configuration Schema (1). This OID is represented in this +# document by the keystring "DUAConfSchemaOID" +# (1.3.6.1.4.1.11.1.3.1). +objectidentifier DUAConfSchemaOID 1.3.6.1.4.1.11.1.3.1 +# +# 2.2 Attributes +# +# The attributes and classes defined in this document are summarized +# below. +# +# The following attributes are defined in this document: +# +# preferredServerList +# defaultServerList +# defaultSearchBase +# defaultSearchScope +# authenticationMethod +# credentialLevel +# serviceSearchDescriptor +# +# +# +# Joslin [Page 3] +# Internet-Draft DUA Configuration Schema October 2002 +# +# +# serviceCredentialLevel +# serviceAuthenticationMethod +# attributeMap +# objectclassMap +# searchTimeLimit +# bindTimeLimit +# followReferrals +# dereferenceAliases +# profileTTL +# +# 2.3 Object Classes +# +# The following object class is defined in this document: +# +# DUAConfigProfile +# +# +attributeType ( DUAConfSchemaOID:1.0 NAME 'defaultServerList' + DESC 'Default LDAP server host address used by a DUA' + EQUALITY caseIgnoreMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 + SINGLE-VALUE ) + +attributeType ( DUAConfSchemaOID:1.1 NAME 'defaultSearchBase' + DESC 'Default LDAP base DN used by a DUA' + EQUALITY distinguishedNameMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 + SINGLE-VALUE ) + +attributeType ( DUAConfSchemaOID:1.2 NAME 'preferredServerList' + DESC 'Preferred LDAP server host addresses to be used by a + DUA' + EQUALITY caseIgnoreMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 + SINGLE-VALUE ) + +attributeType ( DUAConfSchemaOID:1.3 NAME 'searchTimeLimit' + DESC 'Maximum time in seconds a DUA should allow for a + search to complete' + EQUALITY integerMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 + SINGLE-VALUE ) + +attributeType ( DUAConfSchemaOID:1.4 NAME 'bindTimeLimit' + DESC 'Maximum time in seconds a DUA should allow for the + bind operation to complete' + EQUALITY integerMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 + SINGLE-VALUE ) + +attributeType ( DUAConfSchemaOID:1.5 NAME 'followReferrals' + DESC 'Tells DUA if it should follow referrals + returned by a DSA search result' + EQUALITY booleanMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 + SINGLE-VALUE ) + +attributeType ( DUAConfSchemaOID:1.16 NAME 'dereferenceAliases' + DESC 'Tells DUA if it should dereference aliases' + EQUALITY booleanMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 + SINGLE-VALUE ) + +attributeType ( DUAConfSchemaOID:1.6 NAME 'authenticationMethod' + DESC 'A keystring which identifies the type of + authentication method used to contact the DSA' + EQUALITY caseIgnoreMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 + SINGLE-VALUE ) + +attributeType ( DUAConfSchemaOID:1.7 NAME 'profileTTL' + DESC 'Time to live, in seconds, before a client DUA + should re-read this configuration profile' + EQUALITY integerMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 + SINGLE-VALUE ) + +attributeType ( DUAConfSchemaOID:1.14 NAME 'serviceSearchDescriptor' + DESC 'LDAP search descriptor list used by a DUA' + EQUALITY caseExactMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 ) + +attributeType ( DUAConfSchemaOID:1.9 NAME 'attributeMap' + DESC 'Attribute mappings used by a DUA' + EQUALITY caseIgnoreIA5Match + SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) + +attributeType ( DUAConfSchemaOID:1.10 NAME 'credentialLevel' + DESC 'Identifies type of credentials a DUA should + use when binding to the LDAP server' + EQUALITY caseIgnoreIA5Match + SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 + SINGLE-VALUE ) + +attributeType ( DUAConfSchemaOID:1.11 NAME 'objectclassMap' + DESC 'Objectclass mappings used by a DUA' + EQUALITY caseIgnoreIA5Match + SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) + +attributeType ( DUAConfSchemaOID:1.12 NAME 'defaultSearchScope' + DESC 'Default search scope used by a DUA' + EQUALITY caseIgnoreIA5Match + SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 + SINGLE-VALUE ) + +attributeType ( DUAConfSchemaOID:1.13 NAME 'serviceCredentialLevel' + DESC 'Identifies type of credentials a DUA + should use when binding to the LDAP server for a + specific service' + EQUALITY caseIgnoreIA5Match + SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) + +attributeType ( DUAConfSchemaOID:1.15 NAME 'serviceAuthenticationMethod' + DESC 'Authentication method used by a service of the DUA' + EQUALITY caseIgnoreMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 ) +# +# 4. Class Definition +# +# The objectclass below is constructed from the attributes defined in +# 3, with the exception of the cn attribute, which is defined in RFC +# 2256 [8]. cn is used to represent the name of the DUA configura- +# tion profile. +# +objectClass ( DUAConfSchemaOID:2.5 NAME 'DUAConfigProfile' + SUP top STRUCTURAL + DESC 'Abstraction of a base configuration for a DUA' + MUST ( cn ) + MAY ( defaultServerList $ preferredServerList $ + defaultSearchBase $ defaultSearchScope $ + searchTimeLimit $ bindTimeLimit $ + credentialLevel $ authenticationMethod $ + followReferrals $ dereferenceAliases $ + serviceSearchDescriptor $ serviceCredentialLevel $ + serviceAuthenticationMethod $ objectclassMap $ + attributeMap $ profileTTL ) ) -- 2.39.5