From 9ea005fb4428c922536fa75991ce9972304a02fb Mon Sep 17 00:00:00 2001 From: Roy Zang Date: Sat, 22 Aug 2009 03:49:52 +0800 Subject: [PATCH] Use different PBA value for E1000 PCI and PCIe cards MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Signed-off-by: Roy Zang Acked-by: André Schwarz --- drivers/net/e1000.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index b8dd9f2fe4..7f9f783c43 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -50,7 +50,8 @@ tested on both gig copper and gig fiber boards #define bus_to_phys(devno, a) pci_mem_to_phys(devno, a) #define mdelay(n) udelay((n)*1000) -#define E1000_DEFAULT_PBA 0x000a0026 +#define E1000_DEFAULT_PCI_PBA 0x00000030 +#define E1000_DEFAULT_PCIE_PBA 0x000a0026 /* NIC specific static variables go here */ @@ -1349,9 +1350,16 @@ e1000_reset_hw(struct e1000_hw *hw) uint32_t ctrl_ext; uint32_t icr; uint32_t manc; + uint32_t pba = 0; DEBUGFUNC(); + /* get the correct pba value for both PCI and PCIe*/ + if (hw->mac_type < e1000_82571) + pba = E1000_DEFAULT_PCI_PBA; + else + pba = E1000_DEFAULT_PCIE_PBA; + /* For 82542 (rev 2.0), disable MWI before issuing a device reset */ if (hw->mac_type == e1000_82542_rev2_0) { DEBUGOUT("Disabling MWI on 82542 rev 2.0\n"); @@ -1419,7 +1427,7 @@ e1000_reset_hw(struct e1000_hw *hw) if (hw->mac_type == e1000_82542_rev2_0) { pci_write_config_word(hw->pdev, PCI_COMMAND, hw->pci_cmd_word); } - E1000_WRITE_REG(hw, PBA, E1000_DEFAULT_PBA); + E1000_WRITE_REG(hw, PBA, pba); } /****************************************************************************** -- 2.39.5