From 9f0cba528a163645c8ecace413731c23310f2c26 Mon Sep 17 00:00:00 2001 From: Spencer Oliver Date: Tue, 31 Jan 2012 17:55:03 +0000 Subject: [PATCH] build: cleanup src/flash/nor directory Change-Id: Ic299de969ce566282c055ba4dd8b94892c4c4311 Signed-off-by: Spencer Oliver Reviewed-on: http://openocd.zylin.com/420 Tested-by: jenkins --- src/flash/nor/aduc702x.c | 343 ++-- src/flash/nor/at91sam3.c | 3219 +++++++++++++++---------------- src/flash/nor/at91sam7.c | 449 ++--- src/flash/nor/avrf.c | 229 +-- src/flash/nor/cfi.c | 1700 ++++++++-------- src/flash/nor/cfi.h | 19 +- src/flash/nor/core.c | 266 +-- src/flash/nor/core.h | 22 +- src/flash/nor/driver.h | 9 +- src/flash/nor/drivers.c | 4 +- src/flash/nor/dsp5680xx_flash.c | 102 +- src/flash/nor/ecos.c | 201 +- src/flash/nor/em357.c | 264 ++- src/flash/nor/faux.c | 21 +- src/flash/nor/fm3.c | 9 +- src/flash/nor/imp.h | 7 +- src/flash/nor/kinetis.c | 215 +-- src/flash/nor/lpc2000.c | 301 ++- src/flash/nor/lpc288x.c | 212 +- src/flash/nor/lpc2900.c | 995 ++++------ src/flash/nor/non_cfi.c | 140 +- src/flash/nor/non_cfi.h | 4 +- src/flash/nor/ocl.c | 118 +- src/flash/nor/ocl.h | 1 + src/flash/nor/pic32mx.c | 152 +- src/flash/nor/stellaris.c | 207 +- src/flash/nor/stm32f1x.c | 322 +--- src/flash/nor/stm32f2x.c | 112 +- src/flash/nor/stm32lx.c | 232 +-- src/flash/nor/stmsmi.c | 136 +- src/flash/nor/str7x.c | 154 +- src/flash/nor/str9x.c | 211 +- src/flash/nor/str9xpec.c | 183 +- src/flash/nor/tcl.c | 357 ++-- src/flash/nor/tms470.c | 514 ++--- src/flash/nor/virtual.c | 73 +- 36 files changed, 4919 insertions(+), 6584 deletions(-) diff --git a/src/flash/nor/aduc702x.c b/src/flash/nor/aduc702x.c index 02270aef..dde4e69d 100644 --- a/src/flash/nor/aduc702x.c +++ b/src/flash/nor/aduc702x.c @@ -29,20 +29,19 @@ #include #include - static int aduc702x_build_sector_list(struct flash_bank *bank); -static int aduc702x_check_flash_completion(struct target* target, unsigned int timeout_ms); +static int aduc702x_check_flash_completion(struct target *target, unsigned int timeout_ms); static int aduc702x_set_write_enable(struct target *target, int enable); -#define ADUC702x_FLASH 0xfffff800 -#define ADUC702x_FLASH_FEESTA (0*4) -#define ADUC702x_FLASH_FEEMOD (1*4) -#define ADUC702x_FLASH_FEECON (2*4) -#define ADUC702x_FLASH_FEEDAT (3*4) -#define ADUC702x_FLASH_FEEADR (4*4) -#define ADUC702x_FLASH_FEESIGN (5*4) -#define ADUC702x_FLASH_FEEPRO (6*4) -#define ADUC702x_FLASH_FEEHIDE (7*4) +#define ADUC702x_FLASH 0xfffff800 +#define ADUC702x_FLASH_FEESTA (0*4) +#define ADUC702x_FLASH_FEEMOD (1*4) +#define ADUC702x_FLASH_FEECON (2*4) +#define ADUC702x_FLASH_FEEDAT (3*4) +#define ADUC702x_FLASH_FEEADR (4*4) +#define ADUC702x_FLASH_FEESIGN (5*4) +#define ADUC702x_FLASH_FEEPRO (6*4) +#define ADUC702x_FLASH_FEEHIDE (7*4) struct aduc702x_flash_bank { struct working_area *write_algorithm; @@ -56,33 +55,32 @@ FLASH_BANK_COMMAND_HANDLER(aduc702x_flash_bank_command) nbank = malloc(sizeof(struct aduc702x_flash_bank)); - bank->base = 0x80000; - bank->size = 0xF800; // top 4k not accessible + bank->base = 0x80000; + bank->size = 0xF800; /* top 4k not accessible */ bank->driver_priv = nbank; - aduc702x_build_sector_list(bank); + aduc702x_build_sector_list(bank); - return ERROR_OK; + return ERROR_OK; } static int aduc702x_build_sector_list(struct flash_bank *bank) { - //aduc7026_struct flash_bank *aduc7026_info = bank->driver_priv; - - int i = 0; - uint32_t offset = 0; - - // sector size is 512 - bank->num_sectors = bank->size / 512; - bank->sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors); - for (i = 0; i < bank->num_sectors; ++i) - { - bank->sectors[i].offset = offset; - bank->sectors[i].size = 512; - offset += bank->sectors[i].size; - bank->sectors[i].is_erased = -1; - bank->sectors[i].is_protected = 0; - } + /* aduc7026_struct flash_bank *aduc7026_info = bank->driver_priv; */ + + int i = 0; + uint32_t offset = 0; + + /* sector size is 512 */ + bank->num_sectors = bank->size / 512; + bank->sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors); + for (i = 0; i < bank->num_sectors; ++i) { + bank->sectors[i].offset = offset; + bank->sectors[i].size = 512; + offset += bank->sectors[i].size; + bank->sectors[i].is_erased = -1; + bank->sectors[i].is_protected = 0; + } return ERROR_OK; } @@ -95,13 +93,13 @@ static int aduc702x_protect_check(struct flash_bank *bank) static int aduc702x_erase(struct flash_bank *bank, int first, int last) { - //int res; + /* int res; */ int x; int count; - //uint32_t v; + /* uint32_t v; */ struct target *target = bank->target; - aduc702x_set_write_enable(target, 1); + aduc702x_set_write_enable(target, 1); /* mass erase */ if (((first | last) == 0) || ((first == 0) && (last >= bank->num_sectors))) { @@ -110,38 +108,35 @@ static int aduc702x_erase(struct flash_bank *bank, int first, int last) target_write_u16(target, ADUC702x_FLASH + ADUC702x_FLASH_FEEADR, 0xffc3); target_write_u8(target, ADUC702x_FLASH + ADUC702x_FLASH_FEECON, 0x06); - if (aduc702x_check_flash_completion(target, 3500) != ERROR_OK) - { + if (aduc702x_check_flash_completion(target, 3500) != ERROR_OK) { LOG_ERROR("mass erase failed"); - aduc702x_set_write_enable(target, 0); + aduc702x_set_write_enable(target, 0); return ERROR_FLASH_OPERATION_FAILED; } LOG_DEBUG("mass erase successful."); return ERROR_OK; } else { - unsigned long adr; + unsigned long adr; - count = last - first + 1; - for (x = 0; x < count; ++x) - { - adr = bank->base + ((first + x) * 512); + count = last - first + 1; + for (x = 0; x < count; ++x) { + adr = bank->base + ((first + x) * 512); - target_write_u16(target, ADUC702x_FLASH + ADUC702x_FLASH_FEEADR, adr); - target_write_u8(target, ADUC702x_FLASH + ADUC702x_FLASH_FEECON, 0x05); + target_write_u16(target, ADUC702x_FLASH + ADUC702x_FLASH_FEEADR, adr); + target_write_u8(target, ADUC702x_FLASH + ADUC702x_FLASH_FEECON, 0x05); - if (aduc702x_check_flash_completion(target, 50) != ERROR_OK) - { - LOG_ERROR("failed to erase sector at address 0x%08lX", adr); - aduc702x_set_write_enable(target, 0); - return ERROR_FLASH_SECTOR_NOT_ERASED; - } + if (aduc702x_check_flash_completion(target, 50) != ERROR_OK) { + LOG_ERROR("failed to erase sector at address 0x%08lX", adr); + aduc702x_set_write_enable(target, 0); + return ERROR_FLASH_SECTOR_NOT_ERASED; + } - LOG_DEBUG("erased sector at address 0x%08lX", adr); - } - } + LOG_DEBUG("erased sector at address 0x%08lX", adr); + } + } - aduc702x_set_write_enable(target, 0); + aduc702x_set_write_enable(target, 0); return ERROR_OK; } @@ -157,7 +152,10 @@ static int aduc702x_protect(struct flash_bank *bank, int set, int first, int las * * Caller should not check for other return values specifically */ -static int aduc702x_write_block(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, uint32_t count) +static int aduc702x_write_block(struct flash_bank *bank, + uint8_t *buffer, + uint32_t offset, + uint32_t count) { struct aduc702x_flash_bank *aduc702x_info = bank->driver_priv; struct target *target = bank->target; @@ -168,71 +166,66 @@ static int aduc702x_write_block(struct flash_bank *bank, uint8_t *buffer, uint32 struct arm_algorithm armv4_5_info; int retval = ERROR_OK; - if (((count%2)!=0)||((offset%2)!=0)) - { + if (((count%2) != 0) || ((offset%2) != 0)) { LOG_ERROR("write block must be multiple of two bytes in offset & length"); return ERROR_FAIL; } - /* parameters: - - r0 - address of source data (absolute) - r1 - number of halfwords to be copied - r2 - start address in flash (offset from beginning of flash memory) - r3 - exit code - r4 - base address of flash controller (0xFFFFF800) - - registers: - - r5 - scratch - r6 - set to 2, used to write flash command - - */ - static const uint32_t aduc702x_flash_write_code[] = { - //<_start>: - 0xe3a05008, // mov r5, #8 ; 0x8 - 0xe5845004, // str r5, [r4, #4] - 0xe3a06002, // mov r6, #2 ; 0x2 - //: - 0xe1c421b0, // strh r2, [r4, #16] - 0xe0d050b2, // ldrh r5, [r0], #2 - 0xe1c450bc, // strh r5, [r4, #12] - 0xe5c46008, // strb r6, [r4, #8] - //: - 0xe1d430b0, // ldrh r3, [r4] - 0xe3130004, // tst r3, #4 ; 0x4 - 0x1afffffc, // bne 1001c - 0xe2822002, // add r2, r2, #2 ; 0x2 - 0xe2511001, // subs r1, r1, #1 ; 0x1 - 0x0a000001, // beq 1003c - 0xe3130001, // tst r3, #1 ; 0x1 - 0x1afffff3, // bne 1000c - //: - 0xeafffffe // b 1003c + /* parameters: + + r0 - address of source data (absolute) + r1 - number of halfwords to be copied + r2 - start address in flash (offset from beginning of flash memory) + r3 - exit code + r4 - base address of flash controller (0xFFFFF800) + + registers: + + r5 - scratch + r6 - set to 2, used to write flash command + + */ + static const uint32_t aduc702x_flash_write_code[] = { + /* <_start>: */ + 0xe3a05008, /* mov r5, #8 ; 0x8 */ + 0xe5845004, /* str r5, [r4, #4] */ + 0xe3a06002, /* mov r6, #2 ; 0x2 */ + /* : */ + 0xe1c421b0, /* strh r2, [r4, #16] */ + 0xe0d050b2, /* ldrh r5, [r0], #2 */ + 0xe1c450bc, /* strh r5, [r4, #12] */ + 0xe5c46008, /* strb r6, [r4, #8] */ + /* : */ + 0xe1d430b0, /* ldrh r3, [r4] */ + 0xe3130004, /* tst r3, #4 ; 0x4 */ + 0x1afffffc, /* bne 1001c */ + 0xe2822002, /* add r2, r2, #2 ; 0x2 */ + 0xe2511001, /* subs r1, r1, #1 ; 0x1 */ + 0x0a000001, /* beq 1003c */ + 0xe3130001, /* tst r3, #1 ; 0x1 */ + 0x1afffff3, /* bne 1000c */ + /* : */ + 0xeafffffe /* b 1003c */ }; /* flash write code */ if (target_alloc_working_area(target, sizeof(aduc702x_flash_write_code), - &aduc702x_info->write_algorithm) != ERROR_OK) - { + &aduc702x_info->write_algorithm) != ERROR_OK) { LOG_WARNING("no working area available, can't do block memory writes"); return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; - }; + } - retval=target_write_buffer(target, aduc702x_info->write_algorithm->address, - sizeof(aduc702x_flash_write_code), (uint8_t*)aduc702x_flash_write_code); - if (retval!=ERROR_OK) - { + retval = target_write_buffer(target, aduc702x_info->write_algorithm->address, + sizeof(aduc702x_flash_write_code), (uint8_t *)aduc702x_flash_write_code); + if (retval != ERROR_OK) return retval; - } /* memory buffer */ - while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) - { + while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) { buffer_size /= 2; - if (buffer_size <= 256) - { - /* if we already allocated the writing code, but failed to get a buffer, free the algorithm */ + if (buffer_size <= 256) { + /* if we already allocated the writing code, but failed to get a buffer, + *free the algorithm */ if (aduc702x_info->write_algorithm) target_free_working_area(target, aduc702x_info->write_algorithm); @@ -251,32 +244,29 @@ static int aduc702x_write_block(struct flash_bank *bank, uint8_t *buffer, uint32 init_reg_param(®_params[3], "r3", 32, PARAM_IN); init_reg_param(®_params[4], "r4", 32, PARAM_OUT); - while (count > 0) - { + while (count > 0) { uint32_t thisrun_count = (count > buffer_size) ? buffer_size : count; - retval=target_write_buffer(target, source->address, thisrun_count, buffer); - if (retval!=ERROR_OK) - { + retval = target_write_buffer(target, source->address, thisrun_count, buffer); + if (retval != ERROR_OK) break; - } buf_set_u32(reg_params[0].value, 0, 32, source->address); buf_set_u32(reg_params[1].value, 0, 32, thisrun_count/2); buf_set_u32(reg_params[2].value, 0, 32, address); buf_set_u32(reg_params[4].value, 0, 32, 0xFFFFF800); - if ((retval = target_run_algorithm(target, 0, NULL, 5, - reg_params, aduc702x_info->write_algorithm->address, - aduc702x_info->write_algorithm->address + sizeof(aduc702x_flash_write_code) - 4, - 10000, &armv4_5_info)) != ERROR_OK) - { + retval = target_run_algorithm(target, 0, NULL, 5, + reg_params, aduc702x_info->write_algorithm->address, + aduc702x_info->write_algorithm->address + + sizeof(aduc702x_flash_write_code) - 4, + 10000, &armv4_5_info); + if (retval != ERROR_OK) { LOG_ERROR("error executing aduc702x flash write algorithm"); break; } - if ((buf_get_u32(reg_params[3].value, 0, 32) & 1) != 1) - { + if ((buf_get_u32(reg_params[3].value, 0, 32) & 1) != 1) { /* FIX!!!! what does this mean??? replace w/sensible error message */ LOG_ERROR("aduc702x detected error writing flash"); retval = ERROR_FAIL; @@ -302,43 +292,44 @@ static int aduc702x_write_block(struct flash_bank *bank, uint8_t *buffer, uint32 /* All-JTAG, single-access method. Very slow. Used only if there is no * working area available. */ -static int aduc702x_write_single(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, uint32_t count) +static int aduc702x_write_single(struct flash_bank *bank, + uint8_t *buffer, + uint32_t offset, + uint32_t count) { uint32_t x; - uint8_t b; + uint8_t b; struct target *target = bank->target; - aduc702x_set_write_enable(target, 1); + aduc702x_set_write_enable(target, 1); for (x = 0; x < count; x += 2) { - // FEEADR = address + /* FEEADR = address */ target_write_u16(target, ADUC702x_FLASH + ADUC702x_FLASH_FEEADR, offset + x); - // set up data - if ((x + 1) == count) - { - // last byte - target_read_u8(target, offset + x + 1, &b); - } - else - b = buffer[x + 1]; + /* set up data */ + if ((x + 1) == count) { + /* last byte */ + target_read_u8(target, offset + x + 1, &b); + } else + b = buffer[x + 1]; - target_write_u16(target, ADUC702x_FLASH + ADUC702x_FLASH_FEEDAT, buffer[x] | (b << 8)); + target_write_u16(target, ADUC702x_FLASH + ADUC702x_FLASH_FEEDAT, buffer[x] | (b << 8)); - // do single-write command + /* do single-write command */ target_write_u8(target, ADUC702x_FLASH + ADUC702x_FLASH_FEECON, 0x02); - if (aduc702x_check_flash_completion(target, 1) != ERROR_OK) - { - LOG_ERROR("single write failed for address 0x%08lX", (unsigned long)(offset + x)); - aduc702x_set_write_enable(target, 0); + if (aduc702x_check_flash_completion(target, 1) != ERROR_OK) { + LOG_ERROR("single write failed for address 0x%08lX", + (unsigned long)(offset + x)); + aduc702x_set_write_enable(target, 0); return ERROR_FLASH_OPERATION_FAILED; } } - LOG_DEBUG("wrote %d bytes at address 0x%08lX", (int)count, (unsigned long)(offset + x)); + LOG_DEBUG("wrote %d bytes at address 0x%08lX", (int)count, (unsigned long)(offset + x)); - aduc702x_set_write_enable(target, 0); + aduc702x_set_write_enable(target, 0); return ERROR_OK; } @@ -347,24 +338,23 @@ static int aduc702x_write(struct flash_bank *bank, uint8_t *buffer, uint32_t off { int retval; - /* try using a block write */ - if ((retval = aduc702x_write_block(bank, buffer, offset, count)) != ERROR_OK) - { - if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) - { - /* if block write failed (no sufficient working area), - * use normal (slow) JTAG method */ - LOG_WARNING("couldn't use block writes, falling back to single memory accesses"); - - if ((retval = aduc702x_write_single(bank, buffer, offset, count)) != ERROR_OK) - { - LOG_ERROR("slow write failed"); - return ERROR_FLASH_OPERATION_FAILED; - } - } - } - - return retval; + /* try using a block write */ + retval = aduc702x_write_block(bank, buffer, offset, count); + if (retval != ERROR_OK) { + if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) { + /* if block write failed (no sufficient working area), + * use normal (slow) JTAG method */ + LOG_WARNING("couldn't use block writes, falling back to single memory accesses"); + + retval = aduc702x_write_single(bank, buffer, offset, count); + if (retval != ERROR_OK) { + LOG_ERROR("slow write failed"); + return ERROR_FLASH_OPERATION_FAILED; + } + } + } + + return retval; } static int aduc702x_probe(struct flash_bank *bank) @@ -382,10 +372,10 @@ static int aduc702x_info(struct flash_bank *bank, char *buf, int buf_size) * enable = 1 enables writes & erases, 0 disables them */ static int aduc702x_set_write_enable(struct target *target, int enable) { - // don't bother to preserve int enable bit here - target_write_u16(target, ADUC702x_FLASH + ADUC702x_FLASH_FEEMOD, enable ? 8 : 0); + /* don't bother to preserve int enable bit here */ + target_write_u16(target, ADUC702x_FLASH + ADUC702x_FLASH_FEEMOD, enable ? 8 : 0); - return ERROR_OK; + return ERROR_OK; } /* wait up to timeout_ms for controller to not be busy, @@ -393,22 +383,27 @@ static int aduc702x_set_write_enable(struct target *target, int enable) * * this function sleeps 1ms between checks (after the first one), * so in some cases may slow things down without a usleep after the first read */ -static int aduc702x_check_flash_completion(struct target* target, unsigned int timeout_ms) +static int aduc702x_check_flash_completion(struct target *target, unsigned int timeout_ms) { - uint8_t v = 4; - - long long endtime = timeval_ms() + timeout_ms; - while (1) { - target_read_u8(target, ADUC702x_FLASH + ADUC702x_FLASH_FEESTA, &v); - if ((v & 4) == 0) break; - alive_sleep(1); - if (timeval_ms() >= endtime) break; - } - - if (v & 2) return ERROR_FAIL; - // if a command is ignored, both the success and fail bits may be 0 - else if ((v & 3) == 0) return ERROR_FAIL; - else return ERROR_OK; + uint8_t v = 4; + + long long endtime = timeval_ms() + timeout_ms; + while (1) { + target_read_u8(target, ADUC702x_FLASH + ADUC702x_FLASH_FEESTA, &v); + if ((v & 4) == 0) + break; + alive_sleep(1); + if (timeval_ms() >= endtime) + break; + } + + if (v & 2) + return ERROR_FAIL; + /* if a command is ignored, both the success and fail bits may be 0 */ + else if ((v & 3) == 0) + return ERROR_FAIL; + else + return ERROR_OK; } struct flash_driver aduc702x_flash = { diff --git a/src/flash/nor/at91sam3.c b/src/flash/nor/at91sam3.c index 21bfa39c..b5074de7 100644 --- a/src/flash/nor/at91sam3.c +++ b/src/flash/nor/at91sam3.c @@ -60,51 +60,49 @@ #include "config.h" #endif - #include "imp.h" #include #define REG_NAME_WIDTH (12) -// at91sam3u series (has one or two flash banks) +/* at91sam3u series (has one or two flash banks) */ #define FLASH_BANK0_BASE_U 0x00080000 #define FLASH_BANK1_BASE_U 0x00100000 -// at91sam3s series (has always one flash bank) +/* at91sam3s series (has always one flash bank) */ #define FLASH_BANK_BASE_S 0x00400000 -// at91sam3n series (has always one flash bank) +/* at91sam3n series (has always one flash bank) */ #define FLASH_BANK_BASE_N 0x00400000 -#define AT91C_EFC_FCMD_GETD (0x0) // (EFC) Get Flash Descriptor -#define AT91C_EFC_FCMD_WP (0x1) // (EFC) Write Page -#define AT91C_EFC_FCMD_WPL (0x2) // (EFC) Write Page and Lock -#define AT91C_EFC_FCMD_EWP (0x3) // (EFC) Erase Page and Write Page -#define AT91C_EFC_FCMD_EWPL (0x4) // (EFC) Erase Page and Write Page then Lock -#define AT91C_EFC_FCMD_EA (0x5) // (EFC) Erase All -// cmd6 is not present int he at91sam3u4/2/1 data sheet table 17-2 -// #define AT91C_EFC_FCMD_EPL (0x6) // (EFC) Erase plane? -// cmd7 is not present int he at91sam3u4/2/1 data sheet table 17-2 -// #define AT91C_EFC_FCMD_EPA (0x7) // (EFC) Erase pages? -#define AT91C_EFC_FCMD_SLB (0x8) // (EFC) Set Lock Bit -#define AT91C_EFC_FCMD_CLB (0x9) // (EFC) Clear Lock Bit -#define AT91C_EFC_FCMD_GLB (0xA) // (EFC) Get Lock Bit -#define AT91C_EFC_FCMD_SFB (0xB) // (EFC) Set Fuse Bit -#define AT91C_EFC_FCMD_CFB (0xC) // (EFC) Clear Fuse Bit -#define AT91C_EFC_FCMD_GFB (0xD) // (EFC) Get Fuse Bit -#define AT91C_EFC_FCMD_STUI (0xE) // (EFC) Start Read Unique ID -#define AT91C_EFC_FCMD_SPUI (0xF) // (EFC) Stop Read Unique ID +#define AT91C_EFC_FCMD_GETD (0x0) /* (EFC) Get Flash Descriptor */ +#define AT91C_EFC_FCMD_WP (0x1) /* (EFC) Write Page */ +#define AT91C_EFC_FCMD_WPL (0x2) /* (EFC) Write Page and Lock */ +#define AT91C_EFC_FCMD_EWP (0x3) /* (EFC) Erase Page and Write Page */ +#define AT91C_EFC_FCMD_EWPL (0x4) /* (EFC) Erase Page and Write Page + * then Lock */ +#define AT91C_EFC_FCMD_EA (0x5) /* (EFC) Erase All */ +/* cmd6 is not present int he at91sam3u4/2/1 data sheet table 17-2 */ +/* #define AT91C_EFC_FCMD_EPL (0x6) // (EFC) Erase plane? */ +/* cmd7 is not present int he at91sam3u4/2/1 data sheet table 17-2 */ +/* #define AT91C_EFC_FCMD_EPA (0x7) // (EFC) Erase pages? */ +#define AT91C_EFC_FCMD_SLB (0x8) /* (EFC) Set Lock Bit */ +#define AT91C_EFC_FCMD_CLB (0x9) /* (EFC) Clear Lock Bit */ +#define AT91C_EFC_FCMD_GLB (0xA) /* (EFC) Get Lock Bit */ +#define AT91C_EFC_FCMD_SFB (0xB) /* (EFC) Set Fuse Bit */ +#define AT91C_EFC_FCMD_CFB (0xC) /* (EFC) Clear Fuse Bit */ +#define AT91C_EFC_FCMD_GFB (0xD) /* (EFC) Get Fuse Bit */ +#define AT91C_EFC_FCMD_STUI (0xE) /* (EFC) Start Read Unique ID */ +#define AT91C_EFC_FCMD_SPUI (0xF) /* (EFC) Stop Read Unique ID */ #define offset_EFC_FMR 0 #define offset_EFC_FCR 4 #define offset_EFC_FSR 8 #define offset_EFC_FRR 12 - extern struct flash_driver at91sam3_flash; -static float -_tomhz(uint32_t freq_hz) +static float _tomhz(uint32_t freq_hz) { float f; @@ -112,7 +110,7 @@ _tomhz(uint32_t freq_hz) return f; } -// How the chip is configured. +/* How the chip is configured. */ struct sam3_cfg { uint32_t unique_id[4]; @@ -179,15 +177,15 @@ struct sam3_cfg { struct sam3_bank_private { int probed; - // DANGER: THERE ARE DRAGONS HERE.. - // NOTE: If you add more 'ghost' pointers - // be aware that you must *manually* update - // these pointers in the function sam3_GetDetails() - // See the comment "Here there be dragons" + /* DANGER: THERE ARE DRAGONS HERE.. */ + /* NOTE: If you add more 'ghost' pointers */ + /* be aware that you must *manually* update */ + /* these pointers in the function sam3_GetDetails() */ + /* See the comment "Here there be dragons" */ - // so we can find the chip we belong to + /* so we can find the chip we belong to */ struct sam3_chip *pChip; - // so we can find the orginal bank pointer + /* so we can find the orginal bank pointer */ struct flash_bank *pBank; unsigned bank_number; uint32_t controller_address; @@ -201,33 +199,32 @@ struct sam3_bank_private { }; struct sam3_chip_details { - // THERE ARE DRAGONS HERE.. - // note: If you add pointers here - // becareful about them as they - // may need to be updated inside - // the function: "sam3_GetDetails() - // which copy/overwrites the - // 'runtime' copy of this structure + /* THERE ARE DRAGONS HERE.. */ + /* note: If you add pointers here */ + /* becareful about them as they */ + /* may need to be updated inside */ + /* the function: "sam3_GetDetails() */ + /* which copy/overwrites the */ + /* 'runtime' copy of this structure */ uint32_t chipid_cidr; const char *name; unsigned n_gpnvms; #define SAM3_N_NVM_BITS 3 - unsigned gpnvm[SAM3_N_NVM_BITS]; - unsigned total_flash_size; - unsigned total_sram_size; - unsigned n_banks; + unsigned gpnvm[SAM3_N_NVM_BITS]; + unsigned total_flash_size; + unsigned total_sram_size; + unsigned n_banks; #define SAM3_MAX_FLASH_BANKS 2 - // these are "initialized" from the global const data + /* these are "initialized" from the global const data */ struct sam3_bank_private bank[SAM3_MAX_FLASH_BANKS]; }; - struct sam3_chip { struct sam3_chip *next; - int probed; + int probed; - // this is "initialized" from the global const structure + /* this is "initialized" from the global const structure */ struct sam3_chip_details details; struct target *target; struct sam3_cfg cfg; @@ -239,11 +236,9 @@ struct sam3_reg_list { void (*explain_func)(struct sam3_chip *pInfo); }; - static struct sam3_chip *all_sam3_chips; -static struct sam3_chip * -get_current_sam3(struct command_context *cmd_ctx) +static struct sam3_chip *get_current_sam3(struct command_context *cmd_ctx) { struct target *t; static struct sam3_chip *p; @@ -256,26 +251,24 @@ get_current_sam3(struct command_context *cmd_ctx) p = all_sam3_chips; if (!p) { - // this should not happen - // the command is not registered until the chip is created? + /* this should not happen */ + /* the command is not registered until the chip is created? */ command_print(cmd_ctx, "No SAM3 chips exist?"); return NULL; } while (p) { - if (p->target == t) { + if (p->target == t) return p; - } p = p->next; } command_print(cmd_ctx, "Cannot find SAM3 chip?"); return NULL; } - -// these are used to *initialize* the "pChip->details" structure. +/* these are used to *initialize* the "pChip->details" structure. */ static const struct sam3_chip_details all_sam3_details[] = { - // Start at91sam3u* series + /* Start at91sam3u* series */ { .chipid_cidr = 0x28100960, .name = "at91sam3u4e", @@ -284,53 +277,53 @@ static const struct sam3_chip_details all_sam3_details[] = { .n_gpnvms = 3, .n_banks = 2, - // System boots at address 0x0 - // gpnvm[1] = selects boot code - // if gpnvm[1] == 0 - // boot is via "SAMBA" (rom) - // else - // boot is via FLASH - // Selection is via gpnvm[2] - // endif - // - // NOTE: banks 0 & 1 switch places - // if gpnvm[2] == 0 - // Bank0 is the boot rom - // else - // Bank1 is the boot rom - // endif -// .bank[0] = { + /* System boots at address 0x0 */ + /* gpnvm[1] = selects boot code */ + /* if gpnvm[1] == 0 */ + /* boot is via "SAMBA" (rom) */ + /* else */ + /* boot is via FLASH */ + /* Selection is via gpnvm[2] */ + /* endif */ + /* */ + /* NOTE: banks 0 & 1 switch places */ + /* if gpnvm[2] == 0 */ + /* Bank0 is the boot rom */ + /* else */ + /* Bank1 is the boot rom */ + /* endif */ +/* .bank[0] = { */ { - { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 0, - .base_address = FLASH_BANK0_BASE_U, - .controller_address = 0x400e0800, - .flash_wait_states = 6, /* workaround silicon bug */ - .present = 1, - .size_bytes = 128 * 1024, - .nsectors = 16, - .sector_size = 8192, - .page_size = 256, - }, - -// .bank[1] = { - { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 1, - .base_address = FLASH_BANK1_BASE_U, - .controller_address = 0x400e0a00, - .flash_wait_states = 6, /* workaround silicon bug */ - .present = 1, - .size_bytes = 128 * 1024, - .nsectors = 16, - .sector_size = 8192, - .page_size = 256, - }, + { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK0_BASE_U, + .controller_address = 0x400e0800, + .flash_wait_states = 6, /* workaround silicon bug */ + .present = 1, + .size_bytes = 128 * 1024, + .nsectors = 16, + .sector_size = 8192, + .page_size = 256, + }, + +/* .bank[1] = { */ + { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 1, + .base_address = FLASH_BANK1_BASE_U, + .controller_address = 0x400e0a00, + .flash_wait_states = 6, /* workaround silicon bug */ + .present = 1, + .size_bytes = 128 * 1024, + .nsectors = 16, + .sector_size = 8192, + .page_size = 256, + }, }, }, @@ -338,40 +331,40 @@ static const struct sam3_chip_details all_sam3_details[] = { .chipid_cidr = 0x281a0760, .name = "at91sam3u2e", .total_flash_size = 128 * 1024, - .total_sram_size = 36 * 1024, + .total_sram_size = 36 * 1024, .n_gpnvms = 2, .n_banks = 1, - // System boots at address 0x0 - // gpnvm[1] = selects boot code - // if gpnvm[1] == 0 - // boot is via "SAMBA" (rom) - // else - // boot is via FLASH - // Selection is via gpnvm[2] - // endif -// .bank[0] = { + /* System boots at address 0x0 */ + /* gpnvm[1] = selects boot code */ + /* if gpnvm[1] == 0 */ + /* boot is via "SAMBA" (rom) */ + /* else */ + /* boot is via FLASH */ + /* Selection is via gpnvm[2] */ + /* endif */ +/* .bank[0] = { */ { - { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 0, - .base_address = FLASH_BANK0_BASE_U, - .controller_address = 0x400e0800, - .flash_wait_states = 6, /* workaround silicon bug */ - .present = 1, - .size_bytes = 128 * 1024, - .nsectors = 16, - .sector_size = 8192, - .page_size = 256, - }, -// .bank[1] = { - { - .present = 0, - .probed = 0, - .bank_number = 1, - }, + { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK0_BASE_U, + .controller_address = 0x400e0800, + .flash_wait_states = 6, /* workaround silicon bug */ + .present = 1, + .size_bytes = 128 * 1024, + .nsectors = 16, + .sector_size = 8192, + .page_size = 256, + }, +/* .bank[1] = { */ + { + .present = 0, + .probed = 0, + .bank_number = 1, + }, }, }, { @@ -382,39 +375,39 @@ static const struct sam3_chip_details all_sam3_details[] = { .n_gpnvms = 2, .n_banks = 1, - // System boots at address 0x0 - // gpnvm[1] = selects boot code - // if gpnvm[1] == 0 - // boot is via "SAMBA" (rom) - // else - // boot is via FLASH - // Selection is via gpnvm[2] - // endif - // - -// .bank[0] = { + /* System boots at address 0x0 */ + /* gpnvm[1] = selects boot code */ + /* if gpnvm[1] == 0 */ + /* boot is via "SAMBA" (rom) */ + /* else */ + /* boot is via FLASH */ + /* Selection is via gpnvm[2] */ + /* endif */ + /* */ + +/* .bank[0] = { */ { - { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 0, - .base_address = FLASH_BANK0_BASE_U, - .controller_address = 0x400e0800, - .flash_wait_states = 6, /* workaround silicon bug */ - .present = 1, - .size_bytes = 64 * 1024, - .nsectors = 8, - .sector_size = 8192, - .page_size = 256, - }, - -// .bank[1] = { - { - .present = 0, - .probed = 0, - .bank_number = 1, - }, + { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK0_BASE_U, + .controller_address = 0x400e0800, + .flash_wait_states = 6, /* workaround silicon bug */ + .present = 1, + .size_bytes = 64 * 1024, + .nsectors = 8, + .sector_size = 8192, + .page_size = 256, + }, + +/* .bank[1] = { */ + { + .present = 0, + .probed = 0, + .bank_number = 1, + }, }, }, @@ -426,52 +419,52 @@ static const struct sam3_chip_details all_sam3_details[] = { .n_gpnvms = 3, .n_banks = 2, - // System boots at address 0x0 - // gpnvm[1] = selects boot code - // if gpnvm[1] == 0 - // boot is via "SAMBA" (rom) - // else - // boot is via FLASH - // Selection is via gpnvm[2] - // endif - // - // NOTE: banks 0 & 1 switch places - // if gpnvm[2] == 0 - // Bank0 is the boot rom - // else - // Bank1 is the boot rom - // endif + /* System boots at address 0x0 */ + /* gpnvm[1] = selects boot code */ + /* if gpnvm[1] == 0 */ + /* boot is via "SAMBA" (rom) */ + /* else */ + /* boot is via FLASH */ + /* Selection is via gpnvm[2] */ + /* endif */ + /* */ + /* NOTE: banks 0 & 1 switch places */ + /* if gpnvm[2] == 0 */ + /* Bank0 is the boot rom */ + /* else */ + /* Bank1 is the boot rom */ + /* endif */ { - { -// .bank[0] = { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 0, - .base_address = FLASH_BANK0_BASE_U, - .controller_address = 0x400e0800, - .flash_wait_states = 6, /* workaround silicon bug */ - .present = 1, - .size_bytes = 128 * 1024, - .nsectors = 16, - .sector_size = 8192, - .page_size = 256, - }, -// .bank[1] = { - { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 1, - .base_address = FLASH_BANK1_BASE_U, - .controller_address = 0x400e0a00, - .flash_wait_states = 6, /* workaround silicon bug */ - .present = 1, - .size_bytes = 128 * 1024, - .nsectors = 16, - .sector_size = 8192, - .page_size = 256, - }, + { +/* .bank[0] = { */ + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK0_BASE_U, + .controller_address = 0x400e0800, + .flash_wait_states = 6, /* workaround silicon bug */ + .present = 1, + .size_bytes = 128 * 1024, + .nsectors = 16, + .sector_size = 8192, + .page_size = 256, + }, +/* .bank[1] = { */ + { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 1, + .base_address = FLASH_BANK1_BASE_U, + .controller_address = 0x400e0a00, + .flash_wait_states = 6, /* workaround silicon bug */ + .present = 1, + .size_bytes = 128 * 1024, + .nsectors = 16, + .sector_size = 8192, + .page_size = 256, + }, }, }, @@ -483,36 +476,36 @@ static const struct sam3_chip_details all_sam3_details[] = { .n_gpnvms = 2, .n_banks = 1, - // System boots at address 0x0 - // gpnvm[1] = selects boot code - // if gpnvm[1] == 0 - // boot is via "SAMBA" (rom) - // else - // boot is via FLASH - // Selection is via gpnvm[2] - // endif + /* System boots at address 0x0 */ + /* gpnvm[1] = selects boot code */ + /* if gpnvm[1] == 0 */ + /* boot is via "SAMBA" (rom) */ + /* else */ + /* boot is via FLASH */ + /* Selection is via gpnvm[2] */ + /* endif */ { -// .bank[0] = { - { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 0, - .base_address = FLASH_BANK0_BASE_U, - .controller_address = 0x400e0800, - .flash_wait_states = 6, /* workaround silicon bug */ - .present = 1, - .size_bytes = 128 * 1024, - .nsectors = 16, - .sector_size = 8192, - .page_size = 256, - }, -// .bank[1] = { - { - .present = 0, - .probed = 0, - .bank_number = 1, - }, +/* .bank[0] = { */ + { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK0_BASE_U, + .controller_address = 0x400e0800, + .flash_wait_states = 6, /* workaround silicon bug */ + .present = 1, + .size_bytes = 128 * 1024, + .nsectors = 16, + .sector_size = 8192, + .page_size = 256, + }, +/* .bank[1] = { */ + { + .present = 0, + .probed = 0, + .bank_number = 1, + }, }, }, { @@ -523,47 +516,47 @@ static const struct sam3_chip_details all_sam3_details[] = { .n_gpnvms = 2, .n_banks = 1, - // System boots at address 0x0 - // gpnvm[1] = selects boot code - // if gpnvm[1] == 0 - // boot is via "SAMBA" (rom) - // else - // boot is via FLASH - // Selection is via gpnvm[2] - // endif - // + /* System boots at address 0x0 */ + /* gpnvm[1] = selects boot code */ + /* if gpnvm[1] == 0 */ + /* boot is via "SAMBA" (rom) */ + /* else */ + /* boot is via FLASH */ + /* Selection is via gpnvm[2] */ + /* endif */ + /* */ { -// .bank[0] = { - { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 0, - .base_address = FLASH_BANK0_BASE_U, - .controller_address = 0x400e0800, - .flash_wait_states = 6, /* workaround silicon bug */ - .present = 1, - .size_bytes = 64 * 1024, - .nsectors = 8, - .sector_size = 8192, - .page_size = 256, - }, -// .bank[1] = { - { - .present = 0, - .probed = 0, - .bank_number = 1, - - }, +/* .bank[0] = { */ + { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK0_BASE_U, + .controller_address = 0x400e0800, + .flash_wait_states = 6, /* workaround silicon bug */ + .present = 1, + .size_bytes = 64 * 1024, + .nsectors = 8, + .sector_size = 8192, + .page_size = 256, + }, +/* .bank[1] = { */ + { + .present = 0, + .probed = 0, + .bank_number = 1, + + }, }, }, - // Start at91sam3s* series + /* Start at91sam3s* series */ - // Note: The preliminary at91sam3s datasheet says on page 302 - // that the flash controller is at address 0x400E0800. - // This is _not_ the case, the controller resides at address 0x400e0a0. + /* Note: The preliminary at91sam3s datasheet says on page 302 */ + /* that the flash controller is at address 0x400E0800. */ + /* This is _not_ the case, the controller resides at address 0x400e0a0. */ { .chipid_cidr = 0x28A00960, .name = "at91sam3s4c", @@ -572,28 +565,28 @@ static const struct sam3_chip_details all_sam3_details[] = { .n_gpnvms = 2, .n_banks = 1, { -// .bank[0] = { - { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 0, - .base_address = FLASH_BANK_BASE_S, - .controller_address = 0x400e0a00, - .flash_wait_states = 6, /* workaround silicon bug */ - .present = 1, - .size_bytes = 256 * 1024, - .nsectors = 32, - .sector_size = 8192, - .page_size = 256, - }, -// .bank[1] = { - { - .present = 0, - .probed = 0, - .bank_number = 1, - - }, +/* .bank[0] = { */ + { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK_BASE_S, + .controller_address = 0x400e0a00, + .flash_wait_states = 6, /* workaround silicon bug */ + .present = 1, + .size_bytes = 256 * 1024, + .nsectors = 32, + .sector_size = 8192, + .page_size = 256, + }, +/* .bank[1] = { */ + { + .present = 0, + .probed = 0, + .bank_number = 1, + + }, }, }, @@ -605,28 +598,28 @@ static const struct sam3_chip_details all_sam3_details[] = { .n_gpnvms = 2, .n_banks = 1, { -// .bank[0] = { - { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 0, - .base_address = FLASH_BANK_BASE_S, - .controller_address = 0x400e0a00, - .flash_wait_states = 6, /* workaround silicon bug */ - .present = 1, - .size_bytes = 256 * 1024, - .nsectors = 32, - .sector_size = 8192, - .page_size = 256, - }, -// .bank[1] = { - { - .present = 0, - .probed = 0, - .bank_number = 1, - - }, +/* .bank[0] = { */ + { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK_BASE_S, + .controller_address = 0x400e0a00, + .flash_wait_states = 6, /* workaround silicon bug */ + .present = 1, + .size_bytes = 256 * 1024, + .nsectors = 32, + .sector_size = 8192, + .page_size = 256, + }, +/* .bank[1] = { */ + { + .present = 0, + .probed = 0, + .bank_number = 1, + + }, }, }, { @@ -637,28 +630,28 @@ static const struct sam3_chip_details all_sam3_details[] = { .n_gpnvms = 2, .n_banks = 1, { -// .bank[0] = { - { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 0, - .base_address = FLASH_BANK_BASE_S, - .controller_address = 0x400e0a00, - .flash_wait_states = 6, /* workaround silicon bug */ - .present = 1, - .size_bytes = 256 * 1024, - .nsectors = 32, - .sector_size = 8192, - .page_size = 256, - }, -// .bank[1] = { - { - .present = 0, - .probed = 0, - .bank_number = 1, - - }, +/* .bank[0] = { */ + { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK_BASE_S, + .controller_address = 0x400e0a00, + .flash_wait_states = 6, /* workaround silicon bug */ + .present = 1, + .size_bytes = 256 * 1024, + .nsectors = 32, + .sector_size = 8192, + .page_size = 256, + }, +/* .bank[1] = { */ + { + .present = 0, + .probed = 0, + .bank_number = 1, + + }, }, }, { @@ -669,28 +662,28 @@ static const struct sam3_chip_details all_sam3_details[] = { .n_gpnvms = 2, .n_banks = 1, { -// .bank[0] = { - { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 0, - .base_address = FLASH_BANK_BASE_S, - .controller_address = 0x400e0a00, - .flash_wait_states = 6, /* workaround silicon bug */ - .present = 1, - .size_bytes = 128 * 1024, - .nsectors = 16, - .sector_size = 8192, - .page_size = 256, - }, -// .bank[1] = { - { - .present = 0, - .probed = 0, - .bank_number = 1, - - }, +/* .bank[0] = { */ + { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK_BASE_S, + .controller_address = 0x400e0a00, + .flash_wait_states = 6, /* workaround silicon bug */ + .present = 1, + .size_bytes = 128 * 1024, + .nsectors = 16, + .sector_size = 8192, + .page_size = 256, + }, +/* .bank[1] = { */ + { + .present = 0, + .probed = 0, + .bank_number = 1, + + }, }, }, { @@ -701,28 +694,28 @@ static const struct sam3_chip_details all_sam3_details[] = { .n_gpnvms = 2, .n_banks = 1, { -// .bank[0] = { - { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 0, - .base_address = FLASH_BANK_BASE_S, - .controller_address = 0x400e0a00, - .flash_wait_states = 6, /* workaround silicon bug */ - .present = 1, - .size_bytes = 128 * 1024, - .nsectors = 16, - .sector_size = 8192, - .page_size = 256, - }, -// .bank[1] = { - { - .present = 0, - .probed = 0, - .bank_number = 1, - - }, +/* .bank[0] = { */ + { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK_BASE_S, + .controller_address = 0x400e0a00, + .flash_wait_states = 6, /* workaround silicon bug */ + .present = 1, + .size_bytes = 128 * 1024, + .nsectors = 16, + .sector_size = 8192, + .page_size = 256, + }, +/* .bank[1] = { */ + { + .present = 0, + .probed = 0, + .bank_number = 1, + + }, }, }, { @@ -733,28 +726,28 @@ static const struct sam3_chip_details all_sam3_details[] = { .n_gpnvms = 2, .n_banks = 1, { -// .bank[0] = { - { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 0, - .base_address = FLASH_BANK_BASE_S, - .controller_address = 0x400e0a00, - .flash_wait_states = 6, /* workaround silicon bug */ - .present = 1, - .size_bytes = 128 * 1024, - .nsectors = 16, - .sector_size = 8192, - .page_size = 256, - }, -// .bank[1] = { - { - .present = 0, - .probed = 0, - .bank_number = 1, - - }, +/* .bank[0] = { */ + { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK_BASE_S, + .controller_address = 0x400e0a00, + .flash_wait_states = 6, /* workaround silicon bug */ + .present = 1, + .size_bytes = 128 * 1024, + .nsectors = 16, + .sector_size = 8192, + .page_size = 256, + }, +/* .bank[1] = { */ + { + .present = 0, + .probed = 0, + .bank_number = 1, + + }, }, }, { @@ -765,28 +758,28 @@ static const struct sam3_chip_details all_sam3_details[] = { .n_gpnvms = 2, .n_banks = 1, { -// .bank[0] = { - { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 0, - .base_address = FLASH_BANK_BASE_S, - .controller_address = 0x400e0a00, - .flash_wait_states = 6, /* workaround silicon bug */ - .present = 1, - .size_bytes = 64 * 1024, - .nsectors = 8, - .sector_size = 8192, - .page_size = 256, - }, -// .bank[1] = { - { - .present = 0, - .probed = 0, - .bank_number = 1, - - }, +/* .bank[0] = { */ + { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK_BASE_S, + .controller_address = 0x400e0a00, + .flash_wait_states = 6, /* workaround silicon bug */ + .present = 1, + .size_bytes = 64 * 1024, + .nsectors = 8, + .sector_size = 8192, + .page_size = 256, + }, +/* .bank[1] = { */ + { + .present = 0, + .probed = 0, + .bank_number = 1, + + }, }, }, { @@ -797,28 +790,28 @@ static const struct sam3_chip_details all_sam3_details[] = { .n_gpnvms = 2, .n_banks = 1, { -// .bank[0] = { - { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 0, - .base_address = FLASH_BANK_BASE_S, - .controller_address = 0x400e0a00, - .flash_wait_states = 6, /* workaround silicon bug */ - .present = 1, - .size_bytes = 64 * 1024, - .nsectors = 8, - .sector_size = 8192, - .page_size = 256, - }, -// .bank[1] = { - { - .present = 0, - .probed = 0, - .bank_number = 1, - - }, +/* .bank[0] = { */ + { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK_BASE_S, + .controller_address = 0x400e0a00, + .flash_wait_states = 6, /* workaround silicon bug */ + .present = 1, + .size_bytes = 64 * 1024, + .nsectors = 8, + .sector_size = 8192, + .page_size = 256, + }, +/* .bank[1] = { */ + { + .present = 0, + .probed = 0, + .bank_number = 1, + + }, }, }, { @@ -829,32 +822,32 @@ static const struct sam3_chip_details all_sam3_details[] = { .n_gpnvms = 2, .n_banks = 1, { -// .bank[0] = { - { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 0, - .base_address = FLASH_BANK_BASE_S, - .controller_address = 0x400e0a00, - .flash_wait_states = 6, /* workaround silicon bug */ - .present = 1, - .size_bytes = 64 * 1024, - .nsectors = 8, - .sector_size = 8192, - .page_size = 256, - }, -// .bank[1] = { - { - .present = 0, - .probed = 0, - .bank_number = 1, - - }, +/* .bank[0] = { */ + { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK_BASE_S, + .controller_address = 0x400e0a00, + .flash_wait_states = 6, /* workaround silicon bug */ + .present = 1, + .size_bytes = 64 * 1024, + .nsectors = 8, + .sector_size = 8192, + .page_size = 256, + }, +/* .bank[1] = { */ + { + .present = 0, + .probed = 0, + .bank_number = 1, + + }, }, }, - // Start at91sam3n* series + /* Start at91sam3n* series */ { .chipid_cidr = 0x29540960, .name = "at91sam3n4c", @@ -863,44 +856,44 @@ static const struct sam3_chip_details all_sam3_details[] = { .n_gpnvms = 3, .n_banks = 1, - // System boots at address 0x0 - // gpnvm[1] = selects boot code - // if gpnvm[1] == 0 - // boot is via "SAMBA" (rom) - // else - // boot is via FLASH - // Selection is via gpnvm[2] - // endif - // - // NOTE: banks 0 & 1 switch places - // if gpnvm[2] == 0 - // Bank0 is the boot rom - // else - // Bank1 is the boot rom - // endif -// .bank[0] = { + /* System boots at address 0x0 */ + /* gpnvm[1] = selects boot code */ + /* if gpnvm[1] == 0 */ + /* boot is via "SAMBA" (rom) */ + /* else */ + /* boot is via FLASH */ + /* Selection is via gpnvm[2] */ + /* endif */ + /* */ + /* NOTE: banks 0 & 1 switch places */ + /* if gpnvm[2] == 0 */ + /* Bank0 is the boot rom */ + /* else */ + /* Bank1 is the boot rom */ + /* endif */ +/* .bank[0] = { */ { - { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 0, - .base_address = FLASH_BANK_BASE_N, - .controller_address = 0x400e0A00, - .flash_wait_states = 6, /* workaround silicon bug */ - .present = 1, - .size_bytes = 256 * 1024, - .nsectors = 16, - .sector_size = 16384, - .page_size = 256, - }, - -// .bank[1] = { - { - .present = 0, - .probed = 0, - .bank_number = 1, - }, + { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK_BASE_N, + .controller_address = 0x400e0A00, + .flash_wait_states = 6, /* workaround silicon bug */ + .present = 1, + .size_bytes = 256 * 1024, + .nsectors = 16, + .sector_size = 16384, + .page_size = 256, + }, + +/* .bank[1] = { */ + { + .present = 0, + .probed = 0, + .bank_number = 1, + }, }, }, @@ -912,44 +905,44 @@ static const struct sam3_chip_details all_sam3_details[] = { .n_gpnvms = 3, .n_banks = 1, - // System boots at address 0x0 - // gpnvm[1] = selects boot code - // if gpnvm[1] == 0 - // boot is via "SAMBA" (rom) - // else - // boot is via FLASH - // Selection is via gpnvm[2] - // endif - // - // NOTE: banks 0 & 1 switch places - // if gpnvm[2] == 0 - // Bank0 is the boot rom - // else - // Bank1 is the boot rom - // endif -// .bank[0] = { + /* System boots at address 0x0 */ + /* gpnvm[1] = selects boot code */ + /* if gpnvm[1] == 0 */ + /* boot is via "SAMBA" (rom) */ + /* else */ + /* boot is via FLASH */ + /* Selection is via gpnvm[2] */ + /* endif */ + /* */ + /* NOTE: banks 0 & 1 switch places */ + /* if gpnvm[2] == 0 */ + /* Bank0 is the boot rom */ + /* else */ + /* Bank1 is the boot rom */ + /* endif */ +/* .bank[0] = { */ { - { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 0, - .base_address = FLASH_BANK_BASE_N, - .controller_address = 0x400e0A00, - .flash_wait_states = 6, /* workaround silicon bug */ - .present = 1, - .size_bytes = 256 * 1024, - .nsectors = 16, - .sector_size = 16384, - .page_size = 256, - }, - -// .bank[1] = { - { - .present = 0, - .probed = 0, - .bank_number = 1, - }, + { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK_BASE_N, + .controller_address = 0x400e0A00, + .flash_wait_states = 6, /* workaround silicon bug */ + .present = 1, + .size_bytes = 256 * 1024, + .nsectors = 16, + .sector_size = 16384, + .page_size = 256, + }, + +/* .bank[1] = { */ + { + .present = 0, + .probed = 0, + .bank_number = 1, + }, }, }, @@ -961,44 +954,44 @@ static const struct sam3_chip_details all_sam3_details[] = { .n_gpnvms = 3, .n_banks = 1, - // System boots at address 0x0 - // gpnvm[1] = selects boot code - // if gpnvm[1] == 0 - // boot is via "SAMBA" (rom) - // else - // boot is via FLASH - // Selection is via gpnvm[2] - // endif - // - // NOTE: banks 0 & 1 switch places - // if gpnvm[2] == 0 - // Bank0 is the boot rom - // else - // Bank1 is the boot rom - // endif -// .bank[0] = { + /* System boots at address 0x0 */ + /* gpnvm[1] = selects boot code */ + /* if gpnvm[1] == 0 */ + /* boot is via "SAMBA" (rom) */ + /* else */ + /* boot is via FLASH */ + /* Selection is via gpnvm[2] */ + /* endif */ + /* */ + /* NOTE: banks 0 & 1 switch places */ + /* if gpnvm[2] == 0 */ + /* Bank0 is the boot rom */ + /* else */ + /* Bank1 is the boot rom */ + /* endif */ +/* .bank[0] = { */ { - { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 0, - .base_address = FLASH_BANK_BASE_N, - .controller_address = 0x400e0A00, - .flash_wait_states = 6, /* workaround silicon bug */ - .present = 1, - .size_bytes = 256 * 1024, - .nsectors = 16, - .sector_size = 16384, - .page_size = 256, - }, - -// .bank[1] = { - { - .present = 0, - .probed = 0, - .bank_number = 1, - }, + { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK_BASE_N, + .controller_address = 0x400e0A00, + .flash_wait_states = 6, /* workaround silicon bug */ + .present = 1, + .size_bytes = 256 * 1024, + .nsectors = 16, + .sector_size = 16384, + .page_size = 256, + }, + +/* .bank[1] = { */ + { + .present = 0, + .probed = 0, + .bank_number = 1, + }, }, }, @@ -1010,44 +1003,44 @@ static const struct sam3_chip_details all_sam3_details[] = { .n_gpnvms = 3, .n_banks = 1, - // System boots at address 0x0 - // gpnvm[1] = selects boot code - // if gpnvm[1] == 0 - // boot is via "SAMBA" (rom) - // else - // boot is via FLASH - // Selection is via gpnvm[2] - // endif - // - // NOTE: banks 0 & 1 switch places - // if gpnvm[2] == 0 - // Bank0 is the boot rom - // else - // Bank1 is the boot rom - // endif -// .bank[0] = { + /* System boots at address 0x0 */ + /* gpnvm[1] = selects boot code */ + /* if gpnvm[1] == 0 */ + /* boot is via "SAMBA" (rom) */ + /* else */ + /* boot is via FLASH */ + /* Selection is via gpnvm[2] */ + /* endif */ + /* */ + /* NOTE: banks 0 & 1 switch places */ + /* if gpnvm[2] == 0 */ + /* Bank0 is the boot rom */ + /* else */ + /* Bank1 is the boot rom */ + /* endif */ +/* .bank[0] = { */ { - { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 0, - .base_address = FLASH_BANK_BASE_N, - .controller_address = 0x400e0A00, - .flash_wait_states = 6, /* workaround silicon bug */ - .present = 1, - .size_bytes = 128 * 1024, - .nsectors = 8, - .sector_size = 16384, - .page_size = 256, - }, - -// .bank[1] = { - { - .present = 0, - .probed = 0, - .bank_number = 1, - }, + { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK_BASE_N, + .controller_address = 0x400e0A00, + .flash_wait_states = 6, /* workaround silicon bug */ + .present = 1, + .size_bytes = 128 * 1024, + .nsectors = 8, + .sector_size = 16384, + .page_size = 256, + }, + +/* .bank[1] = { */ + { + .present = 0, + .probed = 0, + .bank_number = 1, + }, }, }, @@ -1059,44 +1052,44 @@ static const struct sam3_chip_details all_sam3_details[] = { .n_gpnvms = 3, .n_banks = 1, - // System boots at address 0x0 - // gpnvm[1] = selects boot code - // if gpnvm[1] == 0 - // boot is via "SAMBA" (rom) - // else - // boot is via FLASH - // Selection is via gpnvm[2] - // endif - // - // NOTE: banks 0 & 1 switch places - // if gpnvm[2] == 0 - // Bank0 is the boot rom - // else - // Bank1 is the boot rom - // endif -// .bank[0] = { + /* System boots at address 0x0 */ + /* gpnvm[1] = selects boot code */ + /* if gpnvm[1] == 0 */ + /* boot is via "SAMBA" (rom) */ + /* else */ + /* boot is via FLASH */ + /* Selection is via gpnvm[2] */ + /* endif */ + /* */ + /* NOTE: banks 0 & 1 switch places */ + /* if gpnvm[2] == 0 */ + /* Bank0 is the boot rom */ + /* else */ + /* Bank1 is the boot rom */ + /* endif */ +/* .bank[0] = { */ { - { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 0, - .base_address = FLASH_BANK_BASE_N, - .controller_address = 0x400e0A00, - .flash_wait_states = 6, /* workaround silicon bug */ - .present = 1, - .size_bytes = 128 * 1024, - .nsectors = 8, - .sector_size = 16384, - .page_size = 256, - }, - -// .bank[1] = { - { - .present = 0, - .probed = 0, - .bank_number = 1, - }, + { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK_BASE_N, + .controller_address = 0x400e0A00, + .flash_wait_states = 6, /* workaround silicon bug */ + .present = 1, + .size_bytes = 128 * 1024, + .nsectors = 8, + .sector_size = 16384, + .page_size = 256, + }, + +/* .bank[1] = { */ + { + .present = 0, + .probed = 0, + .bank_number = 1, + }, }, }, @@ -1108,44 +1101,44 @@ static const struct sam3_chip_details all_sam3_details[] = { .n_gpnvms = 3, .n_banks = 1, - // System boots at address 0x0 - // gpnvm[1] = selects boot code - // if gpnvm[1] == 0 - // boot is via "SAMBA" (rom) - // else - // boot is via FLASH - // Selection is via gpnvm[2] - // endif - // - // NOTE: banks 0 & 1 switch places - // if gpnvm[2] == 0 - // Bank0 is the boot rom - // else - // Bank1 is the boot rom - // endif -// .bank[0] = { + /* System boots at address 0x0 */ + /* gpnvm[1] = selects boot code */ + /* if gpnvm[1] == 0 */ + /* boot is via "SAMBA" (rom) */ + /* else */ + /* boot is via FLASH */ + /* Selection is via gpnvm[2] */ + /* endif */ + /* */ + /* NOTE: banks 0 & 1 switch places */ + /* if gpnvm[2] == 0 */ + /* Bank0 is the boot rom */ + /* else */ + /* Bank1 is the boot rom */ + /* endif */ +/* .bank[0] = { */ { - { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 0, - .base_address = FLASH_BANK_BASE_N, - .controller_address = 0x400e0A00, - .flash_wait_states = 6, /* workaround silicon bug */ - .present = 1, - .size_bytes = 128 * 1024, - .nsectors = 8, - .sector_size = 16384, - .page_size = 256, - }, - -// .bank[1] = { - { - .present = 0, - .probed = 0, - .bank_number = 1, - }, + { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK_BASE_N, + .controller_address = 0x400e0A00, + .flash_wait_states = 6, /* workaround silicon bug */ + .present = 1, + .size_bytes = 128 * 1024, + .nsectors = 8, + .sector_size = 16384, + .page_size = 256, + }, + +/* .bank[1] = { */ + { + .present = 0, + .probed = 0, + .bank_number = 1, + }, }, }, @@ -1157,44 +1150,44 @@ static const struct sam3_chip_details all_sam3_details[] = { .n_gpnvms = 3, .n_banks = 1, - // System boots at address 0x0 - // gpnvm[1] = selects boot code - // if gpnvm[1] == 0 - // boot is via "SAMBA" (rom) - // else - // boot is via FLASH - // Selection is via gpnvm[2] - // endif - // - // NOTE: banks 0 & 1 switch places - // if gpnvm[2] == 0 - // Bank0 is the boot rom - // else - // Bank1 is the boot rom - // endif -// .bank[0] = { + /* System boots at address 0x0 */ + /* gpnvm[1] = selects boot code */ + /* if gpnvm[1] == 0 */ + /* boot is via "SAMBA" (rom) */ + /* else */ + /* boot is via FLASH */ + /* Selection is via gpnvm[2] */ + /* endif */ + /* */ + /* NOTE: banks 0 & 1 switch places */ + /* if gpnvm[2] == 0 */ + /* Bank0 is the boot rom */ + /* else */ + /* Bank1 is the boot rom */ + /* endif */ +/* .bank[0] = { */ { - { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 0, - .base_address = FLASH_BANK_BASE_N, - .controller_address = 0x400e0A00, - .flash_wait_states = 6, /* workaround silicon bug */ - .present = 1, - .size_bytes = 64 * 1024, - .nsectors = 4, - .sector_size = 16384, - .page_size = 256, - }, - -// .bank[1] = { - { - .present = 0, - .probed = 0, - .bank_number = 1, - }, + { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK_BASE_N, + .controller_address = 0x400e0A00, + .flash_wait_states = 6, /* workaround silicon bug */ + .present = 1, + .size_bytes = 64 * 1024, + .nsectors = 4, + .sector_size = 16384, + .page_size = 256, + }, + +/* .bank[1] = { */ + { + .present = 0, + .probed = 0, + .bank_number = 1, + }, }, }, @@ -1206,44 +1199,44 @@ static const struct sam3_chip_details all_sam3_details[] = { .n_gpnvms = 3, .n_banks = 1, - // System boots at address 0x0 - // gpnvm[1] = selects boot code - // if gpnvm[1] == 0 - // boot is via "SAMBA" (rom) - // else - // boot is via FLASH - // Selection is via gpnvm[2] - // endif - // - // NOTE: banks 0 & 1 switch places - // if gpnvm[2] == 0 - // Bank0 is the boot rom - // else - // Bank1 is the boot rom - // endif -// .bank[0] = { + /* System boots at address 0x0 */ + /* gpnvm[1] = selects boot code */ + /* if gpnvm[1] == 0 */ + /* boot is via "SAMBA" (rom) */ + /* else */ + /* boot is via FLASH */ + /* Selection is via gpnvm[2] */ + /* endif */ + /* */ + /* NOTE: banks 0 & 1 switch places */ + /* if gpnvm[2] == 0 */ + /* Bank0 is the boot rom */ + /* else */ + /* Bank1 is the boot rom */ + /* endif */ +/* .bank[0] = { */ { - { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 0, - .base_address = FLASH_BANK_BASE_N, - .controller_address = 0x400e0A00, - .flash_wait_states = 6, /* workaround silicon bug */ - .present = 1, - .size_bytes = 64 * 1024, - .nsectors = 4, - .sector_size = 16384, - .page_size = 256, - }, - -// .bank[1] = { - { - .present = 0, - .probed = 0, - .bank_number = 1, - }, + { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK_BASE_N, + .controller_address = 0x400e0A00, + .flash_wait_states = 6, /* workaround silicon bug */ + .present = 1, + .size_bytes = 64 * 1024, + .nsectors = 4, + .sector_size = 16384, + .page_size = 256, + }, + +/* .bank[1] = { */ + { + .present = 0, + .probed = 0, + .bank_number = 1, + }, }, }, @@ -1255,51 +1248,51 @@ static const struct sam3_chip_details all_sam3_details[] = { .n_gpnvms = 3, .n_banks = 1, - // System boots at address 0x0 - // gpnvm[1] = selects boot code - // if gpnvm[1] == 0 - // boot is via "SAMBA" (rom) - // else - // boot is via FLASH - // Selection is via gpnvm[2] - // endif - // - // NOTE: banks 0 & 1 switch places - // if gpnvm[2] == 0 - // Bank0 is the boot rom - // else - // Bank1 is the boot rom - // endif -// .bank[0] = { + /* System boots at address 0x0 */ + /* gpnvm[1] = selects boot code */ + /* if gpnvm[1] == 0 */ + /* boot is via "SAMBA" (rom) */ + /* else */ + /* boot is via FLASH */ + /* Selection is via gpnvm[2] */ + /* endif */ + /* */ + /* NOTE: banks 0 & 1 switch places */ + /* if gpnvm[2] == 0 */ + /* Bank0 is the boot rom */ + /* else */ + /* Bank1 is the boot rom */ + /* endif */ +/* .bank[0] = { */ { - { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 0, - .base_address = FLASH_BANK_BASE_N, - .controller_address = 0x400e0A00, - .flash_wait_states = 6, /* workaround silicon bug */ - .present = 1, - .size_bytes = 64 * 1024, - .nsectors = 4, - .sector_size = 16384, - .page_size = 256, - }, - -// .bank[1] = { - { - .present = 0, - .probed = 0, - .bank_number = 1, - }, + { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK_BASE_N, + .controller_address = 0x400e0A00, + .flash_wait_states = 6, /* workaround silicon bug */ + .present = 1, + .size_bytes = 64 * 1024, + .nsectors = 4, + .sector_size = 16384, + .page_size = 256, + }, + +/* .bank[1] = { */ + { + .present = 0, + .probed = 0, + .bank_number = 1, + }, }, }, - // terminate + /* terminate */ { - .chipid_cidr = 0, - .name = NULL, + .chipid_cidr = 0, + .name = NULL, } }; @@ -1318,16 +1311,17 @@ static const struct sam3_chip_details all_sam3_details[] = { * @param pPrivate - info about the bank * @param v - result goes here */ -static int -EFC_GetStatus(struct sam3_bank_private *pPrivate, uint32_t *v) +static int EFC_GetStatus(struct sam3_bank_private *pPrivate, uint32_t *v) { int r; - r = target_read_u32(pPrivate->pChip->target, pPrivate->controller_address + offset_EFC_FSR, v); + r = target_read_u32(pPrivate->pChip->target, + pPrivate->controller_address + offset_EFC_FSR, + v); LOG_DEBUG("Status: 0x%08x (lockerror: %d, cmderror: %d, ready: %d)", - (unsigned int)(*v), - ((unsigned int)((*v >> 2) & 1)), - ((unsigned int)((*v >> 1) & 1)), - ((unsigned int)((*v >> 0) & 1))); + (unsigned int)(*v), + ((unsigned int)((*v >> 2) & 1)), + ((unsigned int)((*v >> 1) & 1)), + ((unsigned int)((*v >> 0) & 1))); return r; } @@ -1337,95 +1331,93 @@ EFC_GetStatus(struct sam3_bank_private *pPrivate, uint32_t *v) * @param pPrivate - info about the bank * @param v - result goes here */ -static int -EFC_GetResult(struct sam3_bank_private *pPrivate, uint32_t *v) +static int EFC_GetResult(struct sam3_bank_private *pPrivate, uint32_t *v) { int r; uint32_t rv; - r = target_read_u32(pPrivate->pChip->target, pPrivate->controller_address + offset_EFC_FRR, &rv); - if (v) { + r = target_read_u32(pPrivate->pChip->target, + pPrivate->controller_address + offset_EFC_FRR, + &rv); + if (v) *v = rv; - } LOG_DEBUG("Result: 0x%08x", ((unsigned int)(rv))); return r; } -static int -EFC_StartCommand(struct sam3_bank_private *pPrivate, - unsigned command, unsigned argument) +static int EFC_StartCommand(struct sam3_bank_private *pPrivate, + unsigned command, unsigned argument) { - uint32_t n,v; + uint32_t n, v; int r; int retry; retry = 0; - do_retry: - - // Check command & argument - switch (command) { - - case AT91C_EFC_FCMD_WP: - case AT91C_EFC_FCMD_WPL: - case AT91C_EFC_FCMD_EWP: - case AT91C_EFC_FCMD_EWPL: - // case AT91C_EFC_FCMD_EPL: - // case AT91C_EFC_FCMD_EPA: - case AT91C_EFC_FCMD_SLB: - case AT91C_EFC_FCMD_CLB: - n = (pPrivate->size_bytes / pPrivate->page_size); - if (argument >= n) { - LOG_ERROR("*BUG*: Embedded flash has only %u pages", (unsigned)(n)); - } - break; +do_retry: + + /* Check command & argument */ + switch (command) { + + case AT91C_EFC_FCMD_WP: + case AT91C_EFC_FCMD_WPL: + case AT91C_EFC_FCMD_EWP: + case AT91C_EFC_FCMD_EWPL: + /* case AT91C_EFC_FCMD_EPL: */ + /* case AT91C_EFC_FCMD_EPA: */ + case AT91C_EFC_FCMD_SLB: + case AT91C_EFC_FCMD_CLB: + n = (pPrivate->size_bytes / pPrivate->page_size); + if (argument >= n) + LOG_ERROR("*BUG*: Embedded flash has only %u pages", (unsigned)(n)); + break; - case AT91C_EFC_FCMD_SFB: - case AT91C_EFC_FCMD_CFB: - if (argument >= pPrivate->pChip->details.n_gpnvms) { - LOG_ERROR("*BUG*: Embedded flash has only %d GPNVMs", - pPrivate->pChip->details.n_gpnvms); - } - break; - - case AT91C_EFC_FCMD_GETD: - case AT91C_EFC_FCMD_EA: - case AT91C_EFC_FCMD_GLB: - case AT91C_EFC_FCMD_GFB: - case AT91C_EFC_FCMD_STUI: - case AT91C_EFC_FCMD_SPUI: - if (argument != 0) { - LOG_ERROR("Argument is meaningless for cmd: %d", command); - } - break; - default: - LOG_ERROR("Unknown command %d", command); - break; - } + case AT91C_EFC_FCMD_SFB: + case AT91C_EFC_FCMD_CFB: + if (argument >= pPrivate->pChip->details.n_gpnvms) { + LOG_ERROR("*BUG*: Embedded flash has only %d GPNVMs", + pPrivate->pChip->details.n_gpnvms); + } + break; + + case AT91C_EFC_FCMD_GETD: + case AT91C_EFC_FCMD_EA: + case AT91C_EFC_FCMD_GLB: + case AT91C_EFC_FCMD_GFB: + case AT91C_EFC_FCMD_STUI: + case AT91C_EFC_FCMD_SPUI: + if (argument != 0) + LOG_ERROR("Argument is meaningless for cmd: %d", command); + break; + default: + LOG_ERROR("Unknown command %d", command); + break; + } if (command == AT91C_EFC_FCMD_SPUI) { - // this is a very special situation. - // Situation (1) - error/retry - see below - // And we are being called recursively - // Situation (2) - normal, finished reading unique id + /* this is a very special situation. */ + /* Situation (1) - error/retry - see below */ + /* And we are being called recursively */ + /* Situation (2) - normal, finished reading unique id */ } else { - // it should be "ready" + /* it should be "ready" */ EFC_GetStatus(pPrivate, &v); if (v & 1) { - // then it is ready - // we go on + /* then it is ready */ + /* we go on */ } else { if (retry) { - // we have done this before - // the controller is not responding. - LOG_ERROR("flash controller(%d) is not ready! Error", pPrivate->bank_number); + /* we have done this before */ + /* the controller is not responding. */ + LOG_ERROR("flash controller(%d) is not ready! Error", + pPrivate->bank_number); return ERROR_FAIL; } else { retry++; LOG_ERROR("Flash controller(%d) is not ready, attempting reset", - pPrivate->bank_number); - // we do that by issuing the *STOP* command + pPrivate->bank_number); + /* we do that by issuing the *STOP* command */ EFC_StartCommand(pPrivate, AT91C_EFC_FCMD_SPUI, 0); - // above is recursive, and further recursion is blocked by - // if (command == AT91C_EFC_FCMD_SPUI) above + /* above is recursive, and further recursion is blocked by */ + /* if (command == AT91C_EFC_FCMD_SPUI) above */ goto do_retry; } } @@ -1434,11 +1426,9 @@ EFC_StartCommand(struct sam3_bank_private *pPrivate, v = (0x5A << 24) | (argument << 8) | command; LOG_DEBUG("Command: 0x%08x", ((unsigned int)(v))); r = target_write_u32(pPrivate->pBank->target, - pPrivate->controller_address + offset_EFC_FCR, - v); - if (r != ERROR_OK) { + pPrivate->controller_address + offset_EFC_FCR, v); + if (r != ERROR_OK) LOG_DEBUG("Error Write failed"); - } return r; } @@ -1449,97 +1439,82 @@ EFC_StartCommand(struct sam3_bank_private *pPrivate, * @param argument - Optional command argument. * @param status - put command status bits here */ -static int -EFC_PerformCommand(struct sam3_bank_private *pPrivate, - unsigned command, - unsigned argument, - uint32_t *status) +static int EFC_PerformCommand(struct sam3_bank_private *pPrivate, + unsigned command, + unsigned argument, + uint32_t *status) { int r; uint32_t v; long long ms_now, ms_end; - // default - if (status) { + /* default */ + if (status) *status = 0; - } r = EFC_StartCommand(pPrivate, command, argument); - if (r != ERROR_OK) { + if (r != ERROR_OK) return r; - } ms_end = 500 + timeval_ms(); - - do { + do { r = EFC_GetStatus(pPrivate, &v); - if (r != ERROR_OK) { + if (r != ERROR_OK) return r; - } ms_now = timeval_ms(); if (ms_now > ms_end) { - // error + /* error */ LOG_ERROR("Command timeout"); return ERROR_FAIL; } - } - while ((v & 1) == 0) - ; + } while ((v & 1) == 0); - // error bits.. - if (status) { + /* error bits.. */ + if (status) *status = (v & 0x6); - } return ERROR_OK; } - - - - /** * Read the unique ID. * @param pPrivate - info about the bank * The unique ID is stored in the 'pPrivate' structure. */ -static int -FLASHD_ReadUniqueID (struct sam3_bank_private *pPrivate) +static int FLASHD_ReadUniqueID(struct sam3_bank_private *pPrivate) { int r; uint32_t v; int x; - // assume 0 - pPrivate->pChip->cfg.unique_id[0] = 0; - pPrivate->pChip->cfg.unique_id[1] = 0; - pPrivate->pChip->cfg.unique_id[2] = 0; - pPrivate->pChip->cfg.unique_id[3] = 0; + /* assume 0 */ + pPrivate->pChip->cfg.unique_id[0] = 0; + pPrivate->pChip->cfg.unique_id[1] = 0; + pPrivate->pChip->cfg.unique_id[2] = 0; + pPrivate->pChip->cfg.unique_id[3] = 0; LOG_DEBUG("Begin"); r = EFC_StartCommand(pPrivate, AT91C_EFC_FCMD_STUI, 0); - if (r < 0) { + if (r < 0) return r; - } - for (x = 0 ; x < 4 ; x++) { + for (x = 0; x < 4; x++) { r = target_read_u32(pPrivate->pChip->target, - pPrivate->pBank->base + (x * 4), - &v); - if (r < 0) { + pPrivate->pBank->base + (x * 4), + &v); + if (r < 0) return r; - } pPrivate->pChip->cfg.unique_id[x] = v; } - r = EFC_PerformCommand(pPrivate, AT91C_EFC_FCMD_SPUI, 0, NULL); + r = EFC_PerformCommand(pPrivate, AT91C_EFC_FCMD_SPUI, 0, NULL); LOG_DEBUG("End: R=%d, id = 0x%08x, 0x%08x, 0x%08x, 0x%08x", - r, - (unsigned int)(pPrivate->pChip->cfg.unique_id[0]), - (unsigned int)(pPrivate->pChip->cfg.unique_id[1]), - (unsigned int)(pPrivate->pChip->cfg.unique_id[2]), - (unsigned int)(pPrivate->pChip->cfg.unique_id[3])); + r, + (unsigned int)(pPrivate->pChip->cfg.unique_id[0]), + (unsigned int)(pPrivate->pChip->cfg.unique_id[1]), + (unsigned int)(pPrivate->pChip->cfg.unique_id[2]), + (unsigned int)(pPrivate->pChip->cfg.unique_id[3])); return r; } @@ -1548,24 +1523,20 @@ FLASHD_ReadUniqueID (struct sam3_bank_private *pPrivate) * Erases the entire flash. * @param pPrivate - the info about the bank. */ -static int -FLASHD_EraseEntireBank(struct sam3_bank_private *pPrivate) +static int FLASHD_EraseEntireBank(struct sam3_bank_private *pPrivate) { LOG_DEBUG("Here"); return EFC_PerformCommand(pPrivate, AT91C_EFC_FCMD_EA, 0, NULL); } - - /** * Gets current GPNVM state. * @param pPrivate - info about the bank. * @param gpnvm - GPNVM bit index. * @param puthere - result stored here. */ -//------------------------------------------------------------------------------ -static int -FLASHD_GetGPNVM(struct sam3_bank_private *pPrivate, unsigned gpnvm, unsigned *puthere) +/* ------------------------------------------------------------------------------ */ +static int FLASHD_GetGPNVM(struct sam3_bank_private *pPrivate, unsigned gpnvm, unsigned *puthere) { uint32_t v; int r; @@ -1578,39 +1549,35 @@ FLASHD_GetGPNVM(struct sam3_bank_private *pPrivate, unsigned gpnvm, unsigned *pu if (gpnvm >= pPrivate->pChip->details.n_gpnvms) { LOG_ERROR("Invalid GPNVM %d, max: %d, ignored", - gpnvm,pPrivate->pChip->details.n_gpnvms); + gpnvm, pPrivate->pChip->details.n_gpnvms); return ERROR_FAIL; } - // Get GPNVMs status + /* Get GPNVMs status */ r = EFC_PerformCommand(pPrivate, AT91C_EFC_FCMD_GFB, 0, NULL); if (r != ERROR_OK) { LOG_ERROR("Failed"); return r; } - r = EFC_GetResult(pPrivate, &v); + r = EFC_GetResult(pPrivate, &v); if (puthere) { - // Check if GPNVM is set - // get the bit and make it a 0/1 + /* Check if GPNVM is set */ + /* get the bit and make it a 0/1 */ *puthere = (v >> gpnvm) & 1; } return r; } - - - /** * Clears the selected GPNVM bit. * @param pPrivate info about the bank * @param gpnvm GPNVM index. * @returns 0 if successful; otherwise returns an error code. */ -static int -FLASHD_ClrGPNVM(struct sam3_bank_private *pPrivate, unsigned gpnvm) +static int FLASHD_ClrGPNVM(struct sam3_bank_private *pPrivate, unsigned gpnvm) { int r; unsigned v; @@ -1623,29 +1590,26 @@ FLASHD_ClrGPNVM(struct sam3_bank_private *pPrivate, unsigned gpnvm) if (gpnvm >= pPrivate->pChip->details.n_gpnvms) { LOG_ERROR("Invalid GPNVM %d, max: %d, ignored", - gpnvm,pPrivate->pChip->details.n_gpnvms); + gpnvm, pPrivate->pChip->details.n_gpnvms); return ERROR_FAIL; } r = FLASHD_GetGPNVM(pPrivate, gpnvm, &v); if (r != ERROR_OK) { - LOG_DEBUG("Failed: %d",r); + LOG_DEBUG("Failed: %d", r); return r; } r = EFC_PerformCommand(pPrivate, AT91C_EFC_FCMD_CFB, gpnvm, NULL); - LOG_DEBUG("End: %d",r); + LOG_DEBUG("End: %d", r); return r; } - - /** * Sets the selected GPNVM bit. * @param pPrivate info about the bank * @param gpnvm GPNVM index. */ -static int -FLASHD_SetGPNVM(struct sam3_bank_private *pPrivate, unsigned gpnvm) +static int FLASHD_SetGPNVM(struct sam3_bank_private *pPrivate, unsigned gpnvm) { int r; unsigned v; @@ -1657,44 +1621,39 @@ FLASHD_SetGPNVM(struct sam3_bank_private *pPrivate, unsigned gpnvm) if (gpnvm >= pPrivate->pChip->details.n_gpnvms) { LOG_ERROR("Invalid GPNVM %d, max: %d, ignored", - gpnvm,pPrivate->pChip->details.n_gpnvms); + gpnvm, pPrivate->pChip->details.n_gpnvms); return ERROR_FAIL; } r = FLASHD_GetGPNVM(pPrivate, gpnvm, &v); - if (r != ERROR_OK) { + if (r != ERROR_OK) return r; - } if (v) { - // already set + /* already set */ r = ERROR_OK; } else { - // set it + /* set it */ r = EFC_PerformCommand(pPrivate, AT91C_EFC_FCMD_SFB, gpnvm, NULL); } return r; } - /** * Returns a bit field (at most 64) of locked regions within a page. * @param pPrivate info about the bank * @param v where to store locked bits */ -static int -FLASHD_GetLockBits(struct sam3_bank_private *pPrivate, uint32_t *v) +static int FLASHD_GetLockBits(struct sam3_bank_private *pPrivate, uint32_t *v) { int r; LOG_DEBUG("Here"); - r = EFC_PerformCommand(pPrivate, AT91C_EFC_FCMD_GLB, 0, NULL); - if (r == ERROR_OK) { + r = EFC_PerformCommand(pPrivate, AT91C_EFC_FCMD_GLB, 0, NULL); + if (r == ERROR_OK) r = EFC_GetResult(pPrivate, v); - } - LOG_DEBUG("End: %d",r); + LOG_DEBUG("End: %d", r); return r; } - /** * Unlocks all the regions in the given address range. * @param pPrivate info about the bank @@ -1702,10 +1661,9 @@ FLASHD_GetLockBits(struct sam3_bank_private *pPrivate, uint32_t *v) * @param end_sector last (inclusive) to unlock */ -static int -FLASHD_Unlock(struct sam3_bank_private *pPrivate, - unsigned start_sector, - unsigned end_sector) +static int FLASHD_Unlock(struct sam3_bank_private *pPrivate, + unsigned start_sector, + unsigned end_sector) { int r; uint32_t status; @@ -1714,31 +1672,28 @@ FLASHD_Unlock(struct sam3_bank_private *pPrivate, pages_per_sector = pPrivate->sector_size / pPrivate->page_size; - /* Unlock all pages */ - while (start_sector <= end_sector) { + /* Unlock all pages */ + while (start_sector <= end_sector) { pg = start_sector * pages_per_sector; - r = EFC_PerformCommand(pPrivate, AT91C_EFC_FCMD_CLB, pg, &status); - if (r != ERROR_OK) { - return r; - } - start_sector++; - } + r = EFC_PerformCommand(pPrivate, AT91C_EFC_FCMD_CLB, pg, &status); + if (r != ERROR_OK) + return r; + start_sector++; + } - return ERROR_OK; + return ERROR_OK; } - /** * Locks regions * @param pPrivate - info about the bank * @param start_sector - first sector to lock * @param end_sector - last sector (inclusive) to lock */ -static int -FLASHD_Lock(struct sam3_bank_private *pPrivate, - unsigned start_sector, - unsigned end_sector) +static int FLASHD_Lock(struct sam3_bank_private *pPrivate, + unsigned start_sector, + unsigned end_sector) { uint32_t status; uint32_t pg; @@ -1747,36 +1702,33 @@ FLASHD_Lock(struct sam3_bank_private *pPrivate, pages_per_sector = pPrivate->sector_size / pPrivate->page_size; - /* Lock all pages */ - while (start_sector <= end_sector) { + /* Lock all pages */ + while (start_sector <= end_sector) { pg = start_sector * pages_per_sector; - r = EFC_PerformCommand(pPrivate, AT91C_EFC_FCMD_SLB, pg, &status); - if (r != ERROR_OK) { - return r; - } - start_sector++; - } - return ERROR_OK; + r = EFC_PerformCommand(pPrivate, AT91C_EFC_FCMD_SLB, pg, &status); + if (r != ERROR_OK) + return r; + start_sector++; + } + return ERROR_OK; } - /****** END SAM3 CODE ********/ /* begin helpful debug code */ -// print the fieldname, the field value, in dec & hex, and return field value -static uint32_t -sam3_reg_fieldname(struct sam3_chip *pChip, - const char *regname, - uint32_t value, - unsigned shift, - unsigned width) +/* print the fieldname, the field value, in dec & hex, and return field value */ +static uint32_t sam3_reg_fieldname(struct sam3_chip *pChip, + const char *regname, + uint32_t value, + unsigned shift, + unsigned width) { uint32_t v; int hwidth, dwidth; - // extract the field + /* extract the field */ v = value >> shift; v = v & ((1 << width)-1); if (width <= 16) { @@ -1787,188 +1739,175 @@ sam3_reg_fieldname(struct sam3_chip *pChip, dwidth = 12; } - // show the basics + /* show the basics */ LOG_USER_N("\t%*s: %*d [0x%0*x] ", - REG_NAME_WIDTH, regname, - dwidth, v, - hwidth, v); + REG_NAME_WIDTH, regname, + dwidth, v, + hwidth, v); return v; } - static const char _unknown[] = "unknown"; -static const char * const eproc_names[] = { - _unknown, // 0 - "arm946es", // 1 - "arm7tdmi", // 2 - "cortex-m3", // 3 - "arm920t", // 4 - "arm926ejs", // 5 - _unknown, // 6 - _unknown, // 7 - _unknown, // 8 - _unknown, // 9 - _unknown, // 10 - _unknown, // 11 - _unknown, // 12 - _unknown, // 13 - _unknown, // 14 - _unknown, // 15 +static const char *const eproc_names[] = { + _unknown, /* 0 */ + "arm946es", /* 1 */ + "arm7tdmi", /* 2 */ + "cortex-m3", /* 3 */ + "arm920t", /* 4 */ + "arm926ejs", /* 5 */ + _unknown, /* 6 */ + _unknown, /* 7 */ + _unknown, /* 8 */ + _unknown, /* 9 */ + _unknown, /* 10 */ + _unknown, /* 11 */ + _unknown, /* 12 */ + _unknown, /* 13 */ + _unknown, /* 14 */ + _unknown, /* 15 */ }; -#define nvpsize2 nvpsize // these two tables are identical -static const char * const nvpsize[] = { - "none", // 0 - "8K bytes", // 1 - "16K bytes", // 2 - "32K bytes", // 3 - _unknown, // 4 - "64K bytes", // 5 - _unknown, // 6 - "128K bytes", // 7 - _unknown, // 8 - "256K bytes", // 9 - "512K bytes", // 10 - _unknown, // 11 - "1024K bytes", // 12 - _unknown, // 13 - "2048K bytes", // 14 - _unknown, // 15 +#define nvpsize2 nvpsize /* these two tables are identical */ +static const char *const nvpsize[] = { + "none", /* 0 */ + "8K bytes", /* 1 */ + "16K bytes", /* 2 */ + "32K bytes", /* 3 */ + _unknown, /* 4 */ + "64K bytes", /* 5 */ + _unknown, /* 6 */ + "128K bytes", /* 7 */ + _unknown, /* 8 */ + "256K bytes", /* 9 */ + "512K bytes", /* 10 */ + _unknown, /* 11 */ + "1024K bytes", /* 12 */ + _unknown, /* 13 */ + "2048K bytes", /* 14 */ + _unknown, /* 15 */ }; - -static const char * const sramsize[] = { - "48K Bytes", // 0 - "1K Bytes", // 1 - "2K Bytes", // 2 - "6K Bytes", // 3 - "112K Bytes", // 4 - "4K Bytes", // 5 - "80K Bytes", // 6 - "160K Bytes", // 7 - "8K Bytes", // 8 - "16K Bytes", // 9 - "32K Bytes", // 10 - "64K Bytes", // 11 - "128K Bytes", // 12 - "256K Bytes", // 13 - "96K Bytes", // 14 - "512K Bytes", // 15 +static const char *const sramsize[] = { + "48K Bytes", /* 0 */ + "1K Bytes", /* 1 */ + "2K Bytes", /* 2 */ + "6K Bytes", /* 3 */ + "112K Bytes", /* 4 */ + "4K Bytes", /* 5 */ + "80K Bytes", /* 6 */ + "160K Bytes", /* 7 */ + "8K Bytes", /* 8 */ + "16K Bytes", /* 9 */ + "32K Bytes", /* 10 */ + "64K Bytes", /* 11 */ + "128K Bytes", /* 12 */ + "256K Bytes", /* 13 */ + "96K Bytes", /* 14 */ + "512K Bytes", /* 15 */ }; static const struct archnames { unsigned value; const char *name; } archnames[] = { - { 0x19, "AT91SAM9xx Series" }, - { 0x29, "AT91SAM9XExx Series" }, - { 0x34, "AT91x34 Series" }, - { 0x37, "CAP7 Series" }, - { 0x39, "CAP9 Series" }, - { 0x3B, "CAP11 Series" }, - { 0x40, "AT91x40 Series" }, - { 0x42, "AT91x42 Series" }, - { 0x55, "AT91x55 Series" }, - { 0x60, "AT91SAM7Axx Series" }, - { 0x61, "AT91SAM7AQxx Series" }, - { 0x63, "AT91x63 Series" }, - { 0x70, "AT91SAM7Sxx Series" }, - { 0x71, "AT91SAM7XCxx Series" }, - { 0x72, "AT91SAM7SExx Series" }, - { 0x73, "AT91SAM7Lxx Series" }, - { 0x75, "AT91SAM7Xxx Series" }, - { 0x76, "AT91SAM7SLxx Series" }, - { 0x80, "ATSAM3UxC Series (100-pin version)" }, - { 0x81, "ATSAM3UxE Series (144-pin version)" }, - { 0x83, "ATSAM3AxC Series (100-pin version)" }, - { 0x84, "ATSAM3XxC Series (100-pin version)" }, - { 0x85, "ATSAM3XxE Series (144-pin version)" }, - { 0x86, "ATSAM3XxG Series (208/217-pin version)" }, - { 0x88, "ATSAM3SxA Series (48-pin version)" }, - { 0x89, "ATSAM3SxB Series (64-pin version)" }, - { 0x8A, "ATSAM3SxC Series (100-pin version)" }, - { 0x92, "AT91x92 Series" }, - { 0xF0, "AT75Cxx Series" }, + { 0x19, "AT91SAM9xx Series" }, + { 0x29, "AT91SAM9XExx Series" }, + { 0x34, "AT91x34 Series" }, + { 0x37, "CAP7 Series" }, + { 0x39, "CAP9 Series" }, + { 0x3B, "CAP11 Series" }, + { 0x40, "AT91x40 Series" }, + { 0x42, "AT91x42 Series" }, + { 0x55, "AT91x55 Series" }, + { 0x60, "AT91SAM7Axx Series" }, + { 0x61, "AT91SAM7AQxx Series" }, + { 0x63, "AT91x63 Series" }, + { 0x70, "AT91SAM7Sxx Series" }, + { 0x71, "AT91SAM7XCxx Series" }, + { 0x72, "AT91SAM7SExx Series" }, + { 0x73, "AT91SAM7Lxx Series" }, + { 0x75, "AT91SAM7Xxx Series" }, + { 0x76, "AT91SAM7SLxx Series" }, + { 0x80, "ATSAM3UxC Series (100-pin version)" }, + { 0x81, "ATSAM3UxE Series (144-pin version)" }, + { 0x83, "ATSAM3AxC Series (100-pin version)" }, + { 0x84, "ATSAM3XxC Series (100-pin version)" }, + { 0x85, "ATSAM3XxE Series (144-pin version)" }, + { 0x86, "ATSAM3XxG Series (208/217-pin version)" }, + { 0x88, "ATSAM3SxA Series (48-pin version)" }, + { 0x89, "ATSAM3SxB Series (64-pin version)" }, + { 0x8A, "ATSAM3SxC Series (100-pin version)" }, + { 0x92, "AT91x92 Series" }, + { 0xF0, "AT75Cxx Series" }, { -1, NULL }, - }; -static const char * const nvptype[] = { - "rom", // 0 - "romless or onchip flash", // 1 - "embedded flash memory", // 2 - "rom(nvpsiz) + embedded flash (nvpsiz2)", //3 - "sram emulating flash", // 4 - _unknown, // 5 - _unknown, // 6 - _unknown, // 7 - +static const char *const nvptype[] = { + "rom", /* 0 */ + "romless or onchip flash", /* 1 */ + "embedded flash memory",/* 2 */ + "rom(nvpsiz) + embedded flash (nvpsiz2)", /* 3 */ + "sram emulating flash", /* 4 */ + _unknown, /* 5 */ + _unknown, /* 6 */ + _unknown, /* 7 */ }; static const char *_yes_or_no(uint32_t v) { - if (v) { + if (v) return "YES"; - } else { + else return "NO"; - } } -static const char * const _rc_freq[] = { +static const char *const _rc_freq[] = { "4 MHz", "8 MHz", "12 MHz", "reserved" }; -static void -sam3_explain_ckgr_mor(struct sam3_chip *pChip) +static void sam3_explain_ckgr_mor(struct sam3_chip *pChip) { uint32_t v; uint32_t rcen; v = sam3_reg_fieldname(pChip, "MOSCXTEN", pChip->cfg.CKGR_MOR, 0, 1); - LOG_USER("(main xtal enabled: %s)", - _yes_or_no(v)); + LOG_USER("(main xtal enabled: %s)", _yes_or_no(v)); v = sam3_reg_fieldname(pChip, "MOSCXTBY", pChip->cfg.CKGR_MOR, 1, 1); - LOG_USER("(main osc bypass: %s)", - _yes_or_no(v)); + LOG_USER("(main osc bypass: %s)", _yes_or_no(v)); rcen = sam3_reg_fieldname(pChip, "MOSCRCEN", pChip->cfg.CKGR_MOR, 3, 1); - LOG_USER("(onchip RC-OSC enabled: %s)", - _yes_or_no(rcen)); + LOG_USER("(onchip RC-OSC enabled: %s)", _yes_or_no(rcen)); v = sam3_reg_fieldname(pChip, "MOSCRCF", pChip->cfg.CKGR_MOR, 4, 3); - LOG_USER("(onchip RC-OSC freq: %s)", - _rc_freq[v]); + LOG_USER("(onchip RC-OSC freq: %s)", _rc_freq[v]); pChip->cfg.rc_freq = 0; if (rcen) { switch (v) { - default: - pChip->cfg.rc_freq = 0; - break; - case 0: - pChip->cfg.rc_freq = 4 * 1000 * 1000; - break; - case 1: - pChip->cfg.rc_freq = 8 * 1000 * 1000; - break; - case 2: - pChip->cfg.rc_freq = 12* 1000 * 1000; - break; + default: + pChip->cfg.rc_freq = 0; + break; + case 0: + pChip->cfg.rc_freq = 4 * 1000 * 1000; + break; + case 1: + pChip->cfg.rc_freq = 8 * 1000 * 1000; + break; + case 2: + pChip->cfg.rc_freq = 12 * 1000 * 1000; + break; } } - v = sam3_reg_fieldname(pChip,"MOSCXTST", pChip->cfg.CKGR_MOR, 8, 8); + v = sam3_reg_fieldname(pChip, "MOSCXTST", pChip->cfg.CKGR_MOR, 8, 8); LOG_USER("(startup clks, time= %f uSecs)", - ((float)(v * 1000000)) / ((float)(pChip->cfg.slow_freq))); + ((float)(v * 1000000)) / ((float)(pChip->cfg.slow_freq))); v = sam3_reg_fieldname(pChip, "MOSCSEL", pChip->cfg.CKGR_MOR, 24, 1); LOG_USER("(mainosc source: %s)", - v ? "external xtal" : "internal RC"); + v ? "external xtal" : "internal RC"); - v = sam3_reg_fieldname(pChip,"CFDEN", pChip->cfg.CKGR_MOR, 25, 1); + v = sam3_reg_fieldname(pChip, "CFDEN", pChip->cfg.CKGR_MOR, 25, 1); LOG_USER("(clock failure enabled: %s)", - _yes_or_no(v)); + _yes_or_no(v)); } - - -static void -sam3_explain_chipid_cidr(struct sam3_chip *pChip) +static void sam3_explain_chipid_cidr(struct sam3_chip *pChip) { int x; uint32_t v; @@ -1986,12 +1925,12 @@ sam3_explain_chipid_cidr(struct sam3_chip *pChip) v = sam3_reg_fieldname(pChip, "NVPSIZE2", pChip->cfg.CHIPID_CIDR, 12, 4); LOG_USER("%s", nvpsize2[v]); - v = sam3_reg_fieldname(pChip, "SRAMSIZE", pChip->cfg.CHIPID_CIDR, 16,4); - LOG_USER("%s", sramsize[ v ]); + v = sam3_reg_fieldname(pChip, "SRAMSIZE", pChip->cfg.CHIPID_CIDR, 16, 4); + LOG_USER("%s", sramsize[v]); v = sam3_reg_fieldname(pChip, "ARCH", pChip->cfg.CHIPID_CIDR, 20, 8); cp = _unknown; - for (x = 0 ; archnames[x].name ; x++) { + for (x = 0; archnames[x].name; x++) { if (v == archnames[x].value) { cp = archnames[x].name; break; @@ -2001,18 +1940,16 @@ sam3_explain_chipid_cidr(struct sam3_chip *pChip) LOG_USER("%s", cp); v = sam3_reg_fieldname(pChip, "NVPTYP", pChip->cfg.CHIPID_CIDR, 28, 3); - LOG_USER("%s", nvptype[ v ]); + LOG_USER("%s", nvptype[v]); v = sam3_reg_fieldname(pChip, "EXTID", pChip->cfg.CHIPID_CIDR, 31, 1); LOG_USER("(exists: %s)", _yes_or_no(v)); } -static void -sam3_explain_ckgr_mcfr(struct sam3_chip *pChip) +static void sam3_explain_ckgr_mcfr(struct sam3_chip *pChip) { uint32_t v; - v = sam3_reg_fieldname(pChip, "MAINFRDY", pChip->cfg.CKGR_MCFR, 16, 1); LOG_USER("(main ready: %s)", _yes_or_no(v)); @@ -2022,36 +1959,32 @@ sam3_explain_ckgr_mcfr(struct sam3_chip *pChip) pChip->cfg.mainosc_freq = v; LOG_USER("(%3.03f Mhz (%d.%03dkhz slowclk)", - _tomhz(v), - pChip->cfg.slow_freq / 1000, - pChip->cfg.slow_freq % 1000); - + _tomhz(v), + pChip->cfg.slow_freq / 1000, + pChip->cfg.slow_freq % 1000); } -static void -sam3_explain_ckgr_plla(struct sam3_chip *pChip) +static void sam3_explain_ckgr_plla(struct sam3_chip *pChip) { - uint32_t mula,diva; + uint32_t mula, diva; diva = sam3_reg_fieldname(pChip, "DIVA", pChip->cfg.CKGR_PLLAR, 0, 8); LOG_USER_N("\n"); mula = sam3_reg_fieldname(pChip, "MULA", pChip->cfg.CKGR_PLLAR, 16, 11); LOG_USER_N("\n"); pChip->cfg.plla_freq = 0; - if (mula == 0) { + if (mula == 0) LOG_USER("\tPLLA Freq: (Disabled,mula = 0)"); - } else if (diva == 0) { + else if (diva == 0) LOG_USER("\tPLLA Freq: (Disabled,diva = 0)"); - } else if (diva == 1) { + else if (diva == 1) { pChip->cfg.plla_freq = (pChip->cfg.mainosc_freq * (mula + 1)); LOG_USER("\tPLLA Freq: %3.03f MHz", - _tomhz(pChip->cfg.plla_freq)); + _tomhz(pChip->cfg.plla_freq)); } } - -static void -sam3_explain_mckr(struct sam3_chip *pChip) +static void sam3_explain_mckr(struct sam3_chip *pChip) { uint32_t css, pres, fin = 0; int pdiv = 0; @@ -2059,150 +1992,144 @@ sam3_explain_mckr(struct sam3_chip *pChip) css = sam3_reg_fieldname(pChip, "CSS", pChip->cfg.PMC_MCKR, 0, 2); switch (css & 3) { - case 0: - fin = pChip->cfg.slow_freq; - cp = "slowclk"; - break; - case 1: - fin = pChip->cfg.mainosc_freq; - cp = "mainosc"; - break; - case 2: - fin = pChip->cfg.plla_freq; - cp = "plla"; - break; - case 3: - if (pChip->cfg.CKGR_UCKR & (1 << 16)) { - fin = 480 * 1000 * 1000; - cp = "upll"; - } else { - fin = 0; - cp = "upll (*ERROR* UPLL is disabled)"; - } - break; - default: - assert(0); - break; + case 0: + fin = pChip->cfg.slow_freq; + cp = "slowclk"; + break; + case 1: + fin = pChip->cfg.mainosc_freq; + cp = "mainosc"; + break; + case 2: + fin = pChip->cfg.plla_freq; + cp = "plla"; + break; + case 3: + if (pChip->cfg.CKGR_UCKR & (1 << 16)) { + fin = 480 * 1000 * 1000; + cp = "upll"; + } else { + fin = 0; + cp = "upll (*ERROR* UPLL is disabled)"; + } + break; + default: + assert(0); + break; } LOG_USER("%s (%3.03f Mhz)", - cp, - _tomhz(fin)); + cp, + _tomhz(fin)); pres = sam3_reg_fieldname(pChip, "PRES", pChip->cfg.PMC_MCKR, 4, 3); switch (pres & 0x07) { - case 0: - pdiv = 1; - cp = "selected clock"; - break; - case 1: - pdiv = 2; - cp = "clock/2"; - break; - case 2: - pdiv = 4; - cp = "clock/4"; - break; - case 3: - pdiv = 8; - cp = "clock/8"; - break; - case 4: - pdiv = 16; - cp = "clock/16"; - break; - case 5: - pdiv = 32; - cp = "clock/32"; - break; - case 6: - pdiv = 64; - cp = "clock/64"; - break; - case 7: - pdiv = 6; - cp = "clock/6"; - break; - default: - assert(0); - break; + case 0: + pdiv = 1; + cp = "selected clock"; + break; + case 1: + pdiv = 2; + cp = "clock/2"; + break; + case 2: + pdiv = 4; + cp = "clock/4"; + break; + case 3: + pdiv = 8; + cp = "clock/8"; + break; + case 4: + pdiv = 16; + cp = "clock/16"; + break; + case 5: + pdiv = 32; + cp = "clock/32"; + break; + case 6: + pdiv = 64; + cp = "clock/64"; + break; + case 7: + pdiv = 6; + cp = "clock/6"; + break; + default: + assert(0); + break; } LOG_USER("(%s)", cp); fin = fin / pdiv; - // sam3 has a *SINGLE* clock - - // other at91 series parts have divisors for these. + /* sam3 has a *SINGLE* clock - */ + /* other at91 series parts have divisors for these. */ pChip->cfg.cpu_freq = fin; pChip->cfg.mclk_freq = fin; pChip->cfg.fclk_freq = fin; LOG_USER("\t\tResult CPU Freq: %3.03f", - _tomhz(fin)); + _tomhz(fin)); } #if 0 -static struct sam3_chip * -target2sam3(struct target *pTarget) +static struct sam3_chip *target2sam3(struct target *pTarget) { struct sam3_chip *pChip; - if (pTarget == NULL) { + if (pTarget == NULL) return NULL; - } pChip = all_sam3_chips; while (pChip) { - if (pChip->target == pTarget) { - break; // return below - } else { + if (pChip->target == pTarget) + break; /* return below */ + else pChip = pChip->next; - } } return pChip; } #endif -static uint32_t * -sam3_get_reg_ptr(struct sam3_cfg *pCfg, const struct sam3_reg_list *pList) +static uint32_t *sam3_get_reg_ptr(struct sam3_cfg *pCfg, const struct sam3_reg_list *pList) { - // this function exists to help - // keep funky offsetof() errors - // and casting from causing bugs + /* this function exists to help */ + /* keep funky offsetof() errors */ + /* and casting from causing bugs */ - // By using prototypes - we can detect what would - // be casting errors. + /* By using prototypes - we can detect what would */ + /* be casting errors. */ - return ((uint32_t *)(void *)(((char *)(pCfg)) + pList->struct_offset)); + return (uint32_t *)(void *)(((char *)(pCfg)) + pList->struct_offset); } -#define SAM3_ENTRY(NAME, FUNC) { .address = SAM3_ ## NAME, .struct_offset = offsetof(struct sam3_cfg, NAME), #NAME, FUNC } +#define SAM3_ENTRY(NAME, FUNC) { .address = SAM3_ ## NAME, .struct_offset = offsetof( \ + struct sam3_cfg, \ + NAME), # NAME, FUNC } static const struct sam3_reg_list sam3_all_regs[] = { - SAM3_ENTRY(CKGR_MOR , sam3_explain_ckgr_mor), - SAM3_ENTRY(CKGR_MCFR , sam3_explain_ckgr_mcfr), - SAM3_ENTRY(CKGR_PLLAR , sam3_explain_ckgr_plla), - SAM3_ENTRY(CKGR_UCKR , NULL), - SAM3_ENTRY(PMC_FSMR , NULL), - SAM3_ENTRY(PMC_FSPR , NULL), - SAM3_ENTRY(PMC_IMR , NULL), - SAM3_ENTRY(PMC_MCKR , sam3_explain_mckr), - SAM3_ENTRY(PMC_PCK0 , NULL), - SAM3_ENTRY(PMC_PCK1 , NULL), - SAM3_ENTRY(PMC_PCK2 , NULL), - SAM3_ENTRY(PMC_PCSR , NULL), - SAM3_ENTRY(PMC_SCSR , NULL), - SAM3_ENTRY(PMC_SR , NULL), - SAM3_ENTRY(CHIPID_CIDR , sam3_explain_chipid_cidr), - SAM3_ENTRY(CHIPID_EXID , NULL), + SAM3_ENTRY(CKGR_MOR, sam3_explain_ckgr_mor), + SAM3_ENTRY(CKGR_MCFR, sam3_explain_ckgr_mcfr), + SAM3_ENTRY(CKGR_PLLAR, sam3_explain_ckgr_plla), + SAM3_ENTRY(CKGR_UCKR, NULL), + SAM3_ENTRY(PMC_FSMR, NULL), + SAM3_ENTRY(PMC_FSPR, NULL), + SAM3_ENTRY(PMC_IMR, NULL), + SAM3_ENTRY(PMC_MCKR, sam3_explain_mckr), + SAM3_ENTRY(PMC_PCK0, NULL), + SAM3_ENTRY(PMC_PCK1, NULL), + SAM3_ENTRY(PMC_PCK2, NULL), + SAM3_ENTRY(PMC_PCSR, NULL), + SAM3_ENTRY(PMC_SCSR, NULL), + SAM3_ENTRY(PMC_SR, NULL), + SAM3_ENTRY(CHIPID_CIDR, sam3_explain_chipid_cidr), + SAM3_ENTRY(CHIPID_EXID, NULL), SAM3_ENTRY(SUPC_CR, NULL), - // TERMINATE THE LIST + /* TERMINATE THE LIST */ { .name = NULL } }; #undef SAM3_ENTRY - - - -static struct sam3_bank_private * -get_sam3_bank_private(struct flash_bank *bank) +static struct sam3_bank_private *get_sam3_bank_private(struct flash_bank *bank) { return (struct sam3_bank_private *)(bank->driver_priv); } @@ -2211,8 +2138,7 @@ get_sam3_bank_private(struct flash_bank *bank) * Given a pointer to where it goes in the structure, * determine the register name, address from the all registers table. */ -static const struct sam3_reg_list * -sam3_GetReg(struct sam3_chip *pChip, uint32_t *goes_here) +static const struct sam3_reg_list *sam3_GetReg(struct sam3_chip *pChip, uint32_t *goes_here) { const struct sam3_reg_list *pReg; @@ -2220,49 +2146,43 @@ sam3_GetReg(struct sam3_chip *pChip, uint32_t *goes_here) while (pReg->name) { uint32_t *pPossible; - // calculate where this one go.. - // it is "possibly" this register. + /* calculate where this one go.. */ + /* it is "possibly" this register. */ pPossible = ((uint32_t *)(void *)(((char *)(&(pChip->cfg))) + pReg->struct_offset)); - // well? Is it this register + /* well? Is it this register */ if (pPossible == goes_here) { - // Jump for joy! + /* Jump for joy! */ return pReg; } - // next... + /* next... */ pReg++; } - // This is *TOTAL*PANIC* - we are totally screwed. + /* This is *TOTAL*PANIC* - we are totally screwed. */ LOG_ERROR("INVALID SAM3 REGISTER"); return NULL; } - -static int -sam3_ReadThisReg(struct sam3_chip *pChip, uint32_t *goes_here) +static int sam3_ReadThisReg(struct sam3_chip *pChip, uint32_t *goes_here) { const struct sam3_reg_list *pReg; int r; pReg = sam3_GetReg(pChip, goes_here); - if (!pReg) { + if (!pReg) return ERROR_FAIL; - } r = target_read_u32(pChip->target, pReg->address, goes_here); if (r != ERROR_OK) { LOG_ERROR("Cannot read SAM3 register: %s @ 0x%08x, Err: %d", - pReg->name, (unsigned)(pReg->address), r); + pReg->name, (unsigned)(pReg->address), r); } return r; } - - -static int -sam3_ReadAllRegs(struct sam3_chip *pChip) +static int sam3_ReadAllRegs(struct sam3_chip *pChip) { int r; const struct sam3_reg_list *pReg; @@ -2270,10 +2190,10 @@ sam3_ReadAllRegs(struct sam3_chip *pChip) pReg = &(sam3_all_regs[0]); while (pReg->name) { r = sam3_ReadThisReg(pChip, - sam3_get_reg_ptr(&(pChip->cfg), pReg)); + sam3_get_reg_ptr(&(pChip->cfg), pReg)); if (r != ERROR_OK) { LOG_ERROR("Cannot read SAM3 registere: %s @ 0x%08x, Error: %d", - pReg->name, ((unsigned)(pReg->address)), r); + pReg->name, ((unsigned)(pReg->address)), r); return r; } @@ -2283,26 +2203,23 @@ sam3_ReadAllRegs(struct sam3_chip *pChip) return ERROR_OK; } - -static int -sam3_GetInfo(struct sam3_chip *pChip) +static int sam3_GetInfo(struct sam3_chip *pChip) { const struct sam3_reg_list *pReg; uint32_t regval; pReg = &(sam3_all_regs[0]); while (pReg->name) { - // display all regs + /* display all regs */ LOG_DEBUG("Start: %s", pReg->name); regval = *sam3_get_reg_ptr(&(pChip->cfg), pReg); LOG_USER("%*s: [0x%08x] -> 0x%08x", - REG_NAME_WIDTH, - pReg->name, - pReg->address, - regval); - if (pReg->explain_func) { + REG_NAME_WIDTH, + pReg->name, + pReg->address, + regval); + if (pReg->explain_func) (*(pReg->explain_func))(pChip); - } LOG_DEBUG("End: %s", pReg->name); pReg++; } @@ -2312,20 +2229,16 @@ sam3_GetInfo(struct sam3_chip *pChip) LOG_USER(" cpu-freq: %3.03f MHz", _tomhz(pChip->cfg.cpu_freq)); LOG_USER("mclk-freq: %3.03f MHz", _tomhz(pChip->cfg.mclk_freq)); - LOG_USER(" UniqueId: 0x%08x 0x%08x 0x%08x 0x%08x", - pChip->cfg.unique_id[0], - pChip->cfg.unique_id[1], - pChip->cfg.unique_id[2], - pChip->cfg.unique_id[3]); - + pChip->cfg.unique_id[0], + pChip->cfg.unique_id[1], + pChip->cfg.unique_id[2], + pChip->cfg.unique_id[3]); return ERROR_OK; } - -static int -sam3_erase_check(struct flash_bank *bank) +static int sam3_erase_check(struct flash_bank *bank) { int x; @@ -2340,19 +2253,17 @@ sam3_erase_check(struct flash_bank *bank) } LOG_INFO("sam3 - supports auto-erase, erase_check ignored"); - for (x = 0 ; x < bank->num_sectors ; x++) { + for (x = 0; x < bank->num_sectors; x++) bank->sectors[x].is_erased = 1; - } LOG_DEBUG("Done"); return ERROR_OK; } -static int -sam3_protect_check(struct flash_bank *bank) +static int sam3_protect_check(struct flash_bank *bank) { int r; - uint32_t v=0; + uint32_t v = 0; unsigned x; struct sam3_bank_private *pPrivate; @@ -2367,19 +2278,17 @@ sam3_protect_check(struct flash_bank *bank) LOG_ERROR("no private for this bank?"); return ERROR_FAIL; } - if (!(pPrivate->probed)) { + if (!(pPrivate->probed)) return ERROR_FLASH_BANK_NOT_PROBED; - } - r = FLASHD_GetLockBits(pPrivate , &v); + r = FLASHD_GetLockBits(pPrivate, &v); if (r != ERROR_OK) { - LOG_DEBUG("Failed: %d",r); + LOG_DEBUG("Failed: %d", r); return r; } - for (x = 0 ; x < pPrivate->nsectors ; x++) { + for (x = 0; x < pPrivate->nsectors; x++) bank->sectors[x].is_protected = (!!(v & (1 << x))); - } LOG_DEBUG("Done"); return ERROR_OK; } @@ -2390,73 +2299,71 @@ FLASH_BANK_COMMAND_HANDLER(sam3_flash_bank_command) pChip = all_sam3_chips; - // is this an existing chip? + /* is this an existing chip? */ while (pChip) { - if (pChip->target == bank->target) { + if (pChip->target == bank->target) break; - } pChip = pChip->next; } if (!pChip) { - // this is a *NEW* chip + /* this is a *NEW* chip */ pChip = calloc(1, sizeof(struct sam3_chip)); if (!pChip) { LOG_ERROR("NO RAM!"); return ERROR_FAIL; } pChip->target = bank->target; - // insert at head + /* insert at head */ pChip->next = all_sam3_chips; all_sam3_chips = pChip; pChip->target = bank->target; - // assumption is this runs at 32khz + /* assumption is this runs at 32khz */ pChip->cfg.slow_freq = 32768; pChip->probed = 0; } switch (bank->base) { - default: - LOG_ERROR("Address 0x%08x invalid bank address (try 0x%08x or 0x%08x \ - [at91sam3u series] or 0x%08x [at91sam3s series] or \ - 0x%08x [at91sam3n series])", - ((unsigned int)(bank->base)), - ((unsigned int)(FLASH_BANK0_BASE_U)), - ((unsigned int)(FLASH_BANK1_BASE_U)), - ((unsigned int)(FLASH_BANK_BASE_S)), - ((unsigned int)(FLASH_BANK_BASE_N))); - return ERROR_FAIL; - break; - - // at91sam3u series - case FLASH_BANK0_BASE_U: - bank->driver_priv = &(pChip->details.bank[0]); - bank->bank_number = 0; - pChip->details.bank[0].pChip = pChip; - pChip->details.bank[0].pBank = bank; - break; - case FLASH_BANK1_BASE_U: - bank->driver_priv = &(pChip->details.bank[1]); - bank->bank_number = 1; - pChip->details.bank[1].pChip = pChip; - pChip->details.bank[1].pBank = bank; - break; - - /* at91sam3s and at91sam3n series */ - case FLASH_BANK_BASE_S: - bank->driver_priv = &(pChip->details.bank[0]); - bank->bank_number = 0; - pChip->details.bank[0].pChip = pChip; - pChip->details.bank[0].pBank = bank; - break; - } - - // we initialize after probing. + default: + LOG_ERROR("Address 0x%08x invalid bank address (try 0x%08x or 0x%08x " + "[at91sam3u series] or 0x%08x [at91sam3s series] or " + "0x%08x [at91sam3n series])", + ((unsigned int)(bank->base)), + ((unsigned int)(FLASH_BANK0_BASE_U)), + ((unsigned int)(FLASH_BANK1_BASE_U)), + ((unsigned int)(FLASH_BANK_BASE_S)), + ((unsigned int)(FLASH_BANK_BASE_N))); + return ERROR_FAIL; + break; + + /* at91sam3u series */ + case FLASH_BANK0_BASE_U: + bank->driver_priv = &(pChip->details.bank[0]); + bank->bank_number = 0; + pChip->details.bank[0].pChip = pChip; + pChip->details.bank[0].pBank = bank; + break; + case FLASH_BANK1_BASE_U: + bank->driver_priv = &(pChip->details.bank[1]); + bank->bank_number = 1; + pChip->details.bank[1].pChip = pChip; + pChip->details.bank[1].pBank = bank; + break; + + /* at91sam3s and at91sam3n series */ + case FLASH_BANK_BASE_S: + bank->driver_priv = &(pChip->details.bank[0]); + bank->bank_number = 0; + pChip->details.bank[0].pChip = pChip; + pChip->details.bank[0].pBank = bank; + break; + } + + /* we initialize after probing. */ return ERROR_OK; } -static int -sam3_GetDetails(struct sam3_bank_private *pPrivate) +static int sam3_GetDetails(struct sam3_bank_private *pPrivate) { const struct sam3_chip_details *pDetails; struct sam3_chip *pChip; @@ -2466,61 +2373,56 @@ sam3_GetDetails(struct sam3_bank_private *pPrivate) LOG_DEBUG("Begin"); pDetails = all_sam3_details; while (pDetails->name) { - // Compare cidr without version bits - if (pDetails->chipid_cidr == (pPrivate->pChip->cfg.CHIPID_CIDR & 0xFFFFFFE0)) { + /* Compare cidr without version bits */ + if (pDetails->chipid_cidr == (pPrivate->pChip->cfg.CHIPID_CIDR & 0xFFFFFFE0)) break; - } else { + else pDetails++; - } } if (pDetails->name == NULL) { LOG_ERROR("SAM3 ChipID 0x%08x not found in table (perhaps you can this chip?)", - (unsigned int)(pPrivate->pChip->cfg.CHIPID_CIDR)); - // Help the victim, print details about the chip + (unsigned int)(pPrivate->pChip->cfg.CHIPID_CIDR)); + /* Help the victim, print details about the chip */ LOG_INFO("SAM3 CHIPID_CIDR: 0x%08x decodes as follows", - pPrivate->pChip->cfg.CHIPID_CIDR); + pPrivate->pChip->cfg.CHIPID_CIDR); sam3_explain_chipid_cidr(pPrivate->pChip); return ERROR_FAIL; } - // DANGER: THERE ARE DRAGONS HERE + /* DANGER: THERE ARE DRAGONS HERE */ - // get our pChip - it is going - // to be over-written shortly + /* get our pChip - it is going */ + /* to be over-written shortly */ pChip = pPrivate->pChip; - // Note that, in reality: - // - // pPrivate = &(pChip->details.bank[0]) - // or pPrivate = &(pChip->details.bank[1]) - // + /* Note that, in reality: */ + /* */ + /* pPrivate = &(pChip->details.bank[0]) */ + /* or pPrivate = &(pChip->details.bank[1]) */ + /* */ - // save the "bank" pointers - for (x = 0 ; x < SAM3_MAX_FLASH_BANKS ; x++) { - saved_banks[ x ] = pChip->details.bank[x].pBank; - } + /* save the "bank" pointers */ + for (x = 0; x < SAM3_MAX_FLASH_BANKS; x++) + saved_banks[x] = pChip->details.bank[x].pBank; - // Overwrite the "details" structure. + /* Overwrite the "details" structure. */ memcpy(&(pPrivate->pChip->details), - pDetails, - sizeof(pPrivate->pChip->details)); + pDetails, + sizeof(pPrivate->pChip->details)); - // now fix the ghosted pointers - for (x = 0 ; x < SAM3_MAX_FLASH_BANKS ; x++) { + /* now fix the ghosted pointers */ + for (x = 0; x < SAM3_MAX_FLASH_BANKS; x++) { pChip->details.bank[x].pChip = pChip; pChip->details.bank[x].pBank = saved_banks[x]; } - // update the *BANK*SIZE* + /* update the *BANK*SIZE* */ LOG_DEBUG("End"); return ERROR_OK; } - - -static int -_sam3_probe(struct flash_bank *bank, int noise) +static int _sam3_probe(struct flash_bank *bank, int noise) { unsigned x; int r; @@ -2528,8 +2430,7 @@ _sam3_probe(struct flash_bank *bank, int noise) LOG_DEBUG("Begin: Bank: %d, Noise: %d", bank->bank_number, noise); - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -2541,42 +2442,38 @@ _sam3_probe(struct flash_bank *bank, int noise) } r = sam3_ReadAllRegs(pPrivate->pChip); - if (r != ERROR_OK) { + if (r != ERROR_OK) return r; - } - LOG_DEBUG("Here"); - if (pPrivate->pChip->probed) { + if (pPrivate->pChip->probed) r = sam3_GetInfo(pPrivate->pChip); - } else { + else r = sam3_GetDetails(pPrivate); - } - if (r != ERROR_OK) { + if (r != ERROR_OK) return r; - } - // update the flash bank size - for (x = 0 ; x < SAM3_MAX_FLASH_BANKS ; x++) { + /* update the flash bank size */ + for (x = 0; x < SAM3_MAX_FLASH_BANKS; x++) { if (bank->base == pPrivate->pChip->details.bank[x].base_address) { - bank->size = pPrivate->pChip->details.bank[x].size_bytes; + bank->size = pPrivate->pChip->details.bank[x].size_bytes; break; } } if (bank->sectors == NULL) { - bank->sectors = calloc(pPrivate->nsectors, (sizeof((bank->sectors)[0]))); + bank->sectors = calloc(pPrivate->nsectors, (sizeof((bank->sectors)[0]))); if (bank->sectors == NULL) { LOG_ERROR("No memory!"); return ERROR_FAIL; } bank->num_sectors = pPrivate->nsectors; - for (x = 0 ; ((int)(x)) < bank->num_sectors ; x++) { - bank->sectors[x].size = pPrivate->sector_size; - bank->sectors[x].offset = x * (pPrivate->sector_size); - // mark as unknown - bank->sectors[x].is_erased = -1; + for (x = 0; ((int)(x)) < bank->num_sectors; x++) { + bank->sectors[x].size = pPrivate->sector_size; + bank->sectors[x].offset = x * (pPrivate->sector_size); + /* mark as unknown */ + bank->sectors[x].is_erased = -1; bank->sectors[x].is_protected = -1; } } @@ -2584,37 +2481,31 @@ _sam3_probe(struct flash_bank *bank, int noise) pPrivate->probed = 1; r = sam3_protect_check(bank); - if (r != ERROR_OK) { + if (r != ERROR_OK) return r; - } LOG_DEBUG("Bank = %d, nbanks = %d", - pPrivate->bank_number , pPrivate->pChip->details.n_banks); + pPrivate->bank_number, pPrivate->pChip->details.n_banks); if ((pPrivate->bank_number + 1) == pPrivate->pChip->details.n_banks) { - // read unique id, - // it appears to be associated with the *last* flash bank. + /* read unique id, */ + /* it appears to be associated with the *last* flash bank. */ FLASHD_ReadUniqueID(pPrivate); } return r; } -static int -sam3_probe(struct flash_bank *bank) +static int sam3_probe(struct flash_bank *bank) { return _sam3_probe(bank, 1); } -static int -sam3_auto_probe(struct flash_bank *bank) +static int sam3_auto_probe(struct flash_bank *bank) { return _sam3_probe(bank, 0); } - - -static int -sam3_erase(struct flash_bank *bank, int first, int last) +static int sam3_erase(struct flash_bank *bank, int first, int last) { struct sam3_bank_private *pPrivate; int r; @@ -2627,17 +2518,16 @@ sam3_erase(struct flash_bank *bank, int first, int last) r = sam3_auto_probe(bank); if (r != ERROR_OK) { - LOG_DEBUG("Here,r=%d",r); + LOG_DEBUG("Here,r=%d", r); return r; } pPrivate = get_sam3_bank_private(bank); - if (!(pPrivate->probed)) { + if (!(pPrivate->probed)) return ERROR_FLASH_BANK_NOT_PROBED; - } - if ((first == 0) && ((last + 1)== ((int)(pPrivate->nsectors)))) { - // whole chip + if ((first == 0) && ((last + 1) == ((int)(pPrivate->nsectors)))) { + /* whole chip */ LOG_DEBUG("Here"); return FLASHD_EraseEntireBank(pPrivate); } @@ -2645,8 +2535,7 @@ sam3_erase(struct flash_bank *bank, int first, int last) return ERROR_OK; } -static int -sam3_protect(struct flash_bank *bank, int set, int first, int last) +static int sam3_protect(struct flash_bank *bank, int set, int first, int last) { struct sam3_bank_private *pPrivate; int r; @@ -2658,35 +2547,30 @@ sam3_protect(struct flash_bank *bank, int set, int first, int last) } pPrivate = get_sam3_bank_private(bank); - if (!(pPrivate->probed)) { + if (!(pPrivate->probed)) return ERROR_FLASH_BANK_NOT_PROBED; - } - if (set) { + if (set) r = FLASHD_Lock(pPrivate, (unsigned)(first), (unsigned)(last)); - } else { + else r = FLASHD_Unlock(pPrivate, (unsigned)(first), (unsigned)(last)); - } - LOG_DEBUG("End: r=%d",r); + LOG_DEBUG("End: r=%d", r); return r; } - -static int -sam3_info(struct flash_bank *bank, char *buf, int buf_size) +static int sam3_info(struct flash_bank *bank, char *buf, int buf_size) { if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - buf[ 0 ] = 0; + buf[0] = 0; return ERROR_OK; } -static int -sam3_page_read(struct sam3_bank_private *pPrivate, unsigned pagenum, uint8_t *buf) +static int sam3_page_read(struct sam3_bank_private *pPrivate, unsigned pagenum, uint8_t *buf) { uint32_t adr; int r; @@ -2695,112 +2579,108 @@ sam3_page_read(struct sam3_bank_private *pPrivate, unsigned pagenum, uint8_t *bu adr += adr + pPrivate->base_address; r = target_read_memory(pPrivate->pChip->target, - adr, - 4, /* THIS*MUST*BE* in 32bit values */ - pPrivate->page_size / 4, - buf); - if (r != ERROR_OK) { - LOG_ERROR("SAM3: Flash program failed to read page phys address: 0x%08x", (unsigned int)(adr)); - } + adr, + 4, /* THIS*MUST*BE* in 32bit values */ + pPrivate->page_size / 4, + buf); + if (r != ERROR_OK) + LOG_ERROR("SAM3: Flash program failed to read page phys address: 0x%08x", + (unsigned int)(adr)); return r; } -// The code below is basically this: -// compiled with -// arm-none-eabi-gcc -mthumb -mcpu = cortex-m3 -O9 -S ./foobar.c -o foobar.s -// -// Only the *CPU* can write to the flash buffer. -// the DAP cannot... so - we download this 28byte thing -// Run the algorithm - (below) -// to program the device -// -// ======================================== -// #include -// -// struct foo { -// uint32_t *dst; -// const uint32_t *src; -// int n; -// volatile uint32_t *base; -// uint32_t cmd; -// }; -// -// -// uint32_t sam3_function(struct foo *p) -// { -// volatile uint32_t *v; -// uint32_t *d; -// const uint32_t *s; -// int n; -// uint32_t r; -// -// d = p->dst; -// s = p->src; -// n = p->n; -// -// do { -// *d++ = *s++; -// } while (--n) -// ; -// -// v = p->base; -// -// v[ 1 ] = p->cmd; -// do { -// r = v[8/4]; -// } while (!(r&1)) -// ; -// return r; -// } -// ======================================== - - +/* The code below is basically this: */ +/* compiled with */ +/* arm-none-eabi-gcc -mthumb -mcpu = cortex-m3 -O9 -S ./foobar.c -o foobar.s */ +/* */ +/* Only the *CPU* can write to the flash buffer. */ +/* the DAP cannot... so - we download this 28byte thing */ +/* Run the algorithm - (below) */ +/* to program the device */ +/* */ +/* ======================================== */ +/* #include */ +/* */ +/* struct foo { */ +/* uint32_t *dst; */ +/* const uint32_t *src; */ +/* int n; */ +/* volatile uint32_t *base; */ +/* uint32_t cmd; */ +/* }; */ +/* */ +/* */ +/* uint32_t sam3_function(struct foo *p) */ +/* { */ +/* volatile uint32_t *v; */ +/* uint32_t *d; */ +/* const uint32_t *s; */ +/* int n; */ +/* uint32_t r; */ +/* */ +/* d = p->dst; */ +/* s = p->src; */ +/* n = p->n; */ +/* */ +/* do { */ +/* *d++ = *s++; */ +/* } while (--n) */ +/* ; */ +/* */ +/* v = p->base; */ +/* */ +/* v[ 1 ] = p->cmd; */ +/* do { */ +/* r = v[8/4]; */ +/* } while (!(r&1)) */ +/* ; */ +/* return r; */ +/* } */ +/* ======================================== */ static const uint8_t -sam3_page_write_opcodes[] = { - // 24 0000 0446 mov r4, r0 - 0x04,0x46, - // 25 0002 6168 ldr r1, [r4, #4] - 0x61,0x68, - // 26 0004 0068 ldr r0, [r0, #0] - 0x00,0x68, - // 27 0006 A268 ldr r2, [r4, #8] - 0xa2,0x68, - // 28 @ lr needed for prologue - // 29 .L2: - // 30 0008 51F8043B ldr r3, [r1], #4 - 0x51,0xf8,0x04,0x3b, - // 31 000c 12F1FF32 adds r2, r2, #-1 - 0x12,0xf1,0xff,0x32, - // 32 0010 40F8043B str r3, [r0], #4 - 0x40,0xf8,0x04,0x3b, - // 33 0014 F8D1 bne .L2 - 0xf8,0xd1, - // 34 0016 E268 ldr r2, [r4, #12] - 0xe2,0x68, - // 35 0018 2369 ldr r3, [r4, #16] - 0x23,0x69, - // 36 001a 5360 str r3, [r2, #4] - 0x53,0x60, - // 37 001c 0832 adds r2, r2, #8 - 0x08,0x32, - // 38 .L4: - // 39 001e 1068 ldr r0, [r2, #0] - 0x10,0x68, - // 40 0020 10F0010F tst r0, #1 - 0x10,0xf0,0x01,0x0f, - // 41 0024 FBD0 beq .L4 - 0xfb,0xd0, - 0x00,0xBE /* bkpt #0 */ + sam3_page_write_opcodes[] = { + /* 24 0000 0446 mov r4, r0 */ + 0x04, 0x46, + /* 25 0002 6168 ldr r1, [r4, #4] */ + 0x61, 0x68, + /* 26 0004 0068 ldr r0, [r0, #0] */ + 0x00, 0x68, + /* 27 0006 A268 ldr r2, [r4, #8] */ + 0xa2, 0x68, + /* 28 @ lr needed for prologue */ + /* 29 .L2: */ + /* 30 0008 51F8043B ldr r3, [r1], #4 */ + 0x51, 0xf8, 0x04, 0x3b, + /* 31 000c 12F1FF32 adds r2, r2, #-1 */ + 0x12, 0xf1, 0xff, 0x32, + /* 32 0010 40F8043B str r3, [r0], #4 */ + 0x40, 0xf8, 0x04, 0x3b, + /* 33 0014 F8D1 bne .L2 */ + 0xf8, 0xd1, + /* 34 0016 E268 ldr r2, [r4, #12] */ + 0xe2, 0x68, + /* 35 0018 2369 ldr r3, [r4, #16] */ + 0x23, 0x69, + /* 36 001a 5360 str r3, [r2, #4] */ + 0x53, 0x60, + /* 37 001c 0832 adds r2, r2, #8 */ + 0x08, 0x32, + /* 38 .L4: */ + /* 39 001e 1068 ldr r0, [r2, #0] */ + 0x10, 0x68, + /* 40 0020 10F0010F tst r0, #1 */ + 0x10, 0xf0, 0x01, 0x0f, + /* 41 0024 FBD0 beq .L4 */ + 0xfb, 0xd0, + 0x00, 0xBE /* bkpt #0 */ }; - -static int -sam3_page_write(struct sam3_bank_private *pPrivate, unsigned pagenum, uint8_t *buf) +static int sam3_page_write(struct sam3_bank_private *pPrivate, unsigned pagenum, uint8_t *buf) { uint32_t adr; uint32_t status; - uint32_t fmr; /* EEFC Flash Mode Register */ + uint32_t fmr; /* EEFC Flash Mode Register */ int r; adr = pagenum * pPrivate->page_size; @@ -2824,24 +2704,25 @@ sam3_page_write(struct sam3_bank_private *pPrivate, unsigned pagenum, uint8_t *b LOG_DEBUG("Wr Page %u @ phys address: 0x%08x", pagenum, (unsigned int)(adr)); r = target_write_memory(pPrivate->pChip->target, - adr, - 4, /* THIS*MUST*BE* in 32bit values */ - pPrivate->page_size / 4, - buf); + adr, + 4, /* THIS*MUST*BE* in 32bit values */ + pPrivate->page_size / 4, + buf); if (r != ERROR_OK) { - LOG_ERROR("SAM3: Failed to write (buffer) page at phys address 0x%08x", (unsigned int)(adr)); + LOG_ERROR("SAM3: Failed to write (buffer) page at phys address 0x%08x", + (unsigned int)(adr)); return r; } r = EFC_PerformCommand(pPrivate, - // send Erase & Write Page - AT91C_EFC_FCMD_EWP, - pagenum, - &status); + /* send Erase & Write Page */ + AT91C_EFC_FCMD_EWP, + pagenum, + &status); - if (r != ERROR_OK) { - LOG_ERROR("SAM3: Error performing Erase & Write page @ phys address 0x%08x", (unsigned int)(adr)); - } + if (r != ERROR_OK) + LOG_ERROR("SAM3: Error performing Erase & Write page @ phys address 0x%08x", + (unsigned int)(adr)); if (status & (1 << 2)) { LOG_ERROR("SAM3: Page @ Phys address 0x%08x is locked", (unsigned int)(adr)); return ERROR_FAIL; @@ -2853,15 +2734,10 @@ sam3_page_write(struct sam3_bank_private *pPrivate, unsigned pagenum, uint8_t *b return ERROR_OK; } - - - - -static int -sam3_write(struct flash_bank *bank, - uint8_t *buffer, - uint32_t offset, - uint32_t count) +static int sam3_write(struct flash_bank *bank, + uint8_t *buffer, + uint32_t offset, + uint32_t count) { int n; unsigned page_cur; @@ -2871,10 +2747,10 @@ sam3_write(struct flash_bank *bank, struct sam3_bank_private *pPrivate; uint8_t *pagebuffer; - // incase we bail further below, set this to null + /* incase we bail further below, set this to null */ pagebuffer = NULL; - // ignore dumb requests + /* ignore dumb requests */ if (count == 0) { r = ERROR_OK; goto done; @@ -2892,79 +2768,74 @@ sam3_write(struct flash_bank *bank, goto done; } - if ((offset + count) > pPrivate->size_bytes) { LOG_ERROR("Flash write error - past end of bank"); LOG_ERROR(" offset: 0x%08x, count 0x%08x, BankEnd: 0x%08x", - (unsigned int)(offset), - (unsigned int)(count), - (unsigned int)(pPrivate->size_bytes)); + (unsigned int)(offset), + (unsigned int)(count), + (unsigned int)(pPrivate->size_bytes)); r = ERROR_FAIL; goto done; } pagebuffer = malloc(pPrivate->page_size); - if( !pagebuffer ){ + if (!pagebuffer) { LOG_ERROR("No memory for %d Byte page buffer", (int)(pPrivate->page_size)); r = ERROR_FAIL; goto done; } - // what page do we start & end in? + /* what page do we start & end in? */ page_cur = offset / pPrivate->page_size; page_end = (offset + count - 1) / pPrivate->page_size; LOG_DEBUG("Offset: 0x%08x, Count: 0x%08x", (unsigned int)(offset), (unsigned int)(count)); LOG_DEBUG("Page start: %d, Page End: %d", (int)(page_cur), (int)(page_end)); - // Special case: all one page - // - // Otherwise: - // (1) non-aligned start - // (2) body pages - // (3) non-aligned end. + /* Special case: all one page */ + /* */ + /* Otherwise: */ + /* (1) non-aligned start */ + /* (2) body pages */ + /* (3) non-aligned end. */ - // Handle special case - all one page. + /* Handle special case - all one page. */ if (page_cur == page_end) { LOG_DEBUG("Special case, all in one page"); r = sam3_page_read(pPrivate, page_cur, pagebuffer); - if (r != ERROR_OK) { + if (r != ERROR_OK) goto done; - } page_offset = (offset & (pPrivate->page_size-1)); memcpy(pagebuffer + page_offset, - buffer, - count); + buffer, + count); r = sam3_page_write(pPrivate, page_cur, pagebuffer); - if (r != ERROR_OK) { + if (r != ERROR_OK) goto done; - } r = ERROR_OK; goto done; } - // non-aligned start + /* non-aligned start */ page_offset = offset & (pPrivate->page_size - 1); if (page_offset) { LOG_DEBUG("Not-Aligned start"); - // read the partial + /* read the partial */ r = sam3_page_read(pPrivate, page_cur, pagebuffer); - if (r != ERROR_OK) { + if (r != ERROR_OK) goto done; - } - // over-write with new data + /* over-write with new data */ n = (pPrivate->page_size - page_offset); memcpy(pagebuffer + page_offset, - buffer, - n); + buffer, + n); r = sam3_page_write(pPrivate, page_cur, pagebuffer); - if (r != ERROR_OK) { + if (r != ERROR_OK) goto done; - } count -= n; offset += n; @@ -2976,45 +2847,41 @@ sam3_write(struct flash_bank *bank, fix a clang warning */ assert(offset == pPrivate->page_size); - // intermediate large pages - // also - the final *terminal* - // if that terminal page is a full page + /* intermediate large pages */ + /* also - the final *terminal* */ + /* if that terminal page is a full page */ LOG_DEBUG("Full Page Loop: cur=%d, end=%d, count = 0x%08x", - (int)page_cur, (int)page_end, (unsigned int)(count)); + (int)page_cur, (int)page_end, (unsigned int)(count)); while ((page_cur < page_end) && - (count >= pPrivate->page_size)) { + (count >= pPrivate->page_size)) { r = sam3_page_write(pPrivate, page_cur, buffer); - if (r != ERROR_OK) { + if (r != ERROR_OK) goto done; - } - count -= pPrivate->page_size; - buffer += pPrivate->page_size; + count -= pPrivate->page_size; + buffer += pPrivate->page_size; page_cur += 1; } - // terminal partial page? + /* terminal partial page? */ if (count) { LOG_DEBUG("Terminal partial page, count = 0x%08x", (unsigned int)(count)); - // we have a partial page + /* we have a partial page */ r = sam3_page_read(pPrivate, page_cur, pagebuffer); - if (r != ERROR_OK) { + if (r != ERROR_OK) goto done; - } - // data goes at start + /* data goes at start */ memcpy(pagebuffer, buffer, count); r = sam3_page_write(pPrivate, page_cur, pagebuffer); - if (r != ERROR_OK) { + if (r != ERROR_OK) goto done; - } buffer += count; } LOG_DEBUG("Done!"); r = ERROR_OK; - done: - if( pagebuffer ){ +done: + if (pagebuffer) free(pagebuffer); - } return r; } @@ -3022,61 +2889,53 @@ COMMAND_HANDLER(sam3_handle_info_command) { struct sam3_chip *pChip; pChip = get_current_sam3(CMD_CTX); - if (!pChip) { + if (!pChip) return ERROR_OK; - } unsigned x; int r; - // bank0 must exist before we can do anything + /* bank0 must exist before we can do anything */ if (pChip->details.bank[0].pBank == NULL) { x = 0; - need_define: +need_define: command_print(CMD_CTX, - "Please define bank %d via command: flash bank %s ... ", - x, - at91sam3_flash.name); + "Please define bank %d via command: flash bank %s ... ", + x, + at91sam3_flash.name); return ERROR_FAIL; } - // if bank 0 is not probed, then probe it + /* if bank 0 is not probed, then probe it */ if (!(pChip->details.bank[0].probed)) { r = sam3_auto_probe(pChip->details.bank[0].pBank); - if (r != ERROR_OK) { + if (r != ERROR_OK) return ERROR_FAIL; - } } - // above guarantees the "chip details" structure is valid - // and thus, bank private areas are valid - // and we have a SAM3 chip, what a concept! + /* above guarantees the "chip details" structure is valid */ + /* and thus, bank private areas are valid */ + /* and we have a SAM3 chip, what a concept! */ - - // auto-probe other banks, 0 done above - for (x = 1 ; x < SAM3_MAX_FLASH_BANKS ; x++) { - // skip banks not present - if (!(pChip->details.bank[x].present)) { + /* auto-probe other banks, 0 done above */ + for (x = 1; x < SAM3_MAX_FLASH_BANKS; x++) { + /* skip banks not present */ + if (!(pChip->details.bank[x].present)) continue; - } - if (pChip->details.bank[x].pBank == NULL) { + if (pChip->details.bank[x].pBank == NULL) goto need_define; - } - if (pChip->details.bank[x].probed) { + if (pChip->details.bank[x].probed) continue; - } r = sam3_auto_probe(pChip->details.bank[x].pBank); - if (r != ERROR_OK) { + if (r != ERROR_OK) return r; - } } - r = sam3_GetInfo(pChip); if (r != ERROR_OK) { - LOG_DEBUG("Sam3Info, Failed %d",r); + LOG_DEBUG("Sam3Info, Failed %d", r); return r; } @@ -3085,63 +2944,59 @@ COMMAND_HANDLER(sam3_handle_info_command) COMMAND_HANDLER(sam3_handle_gpnvm_command) { - unsigned x,v; - int r,who; + unsigned x, v; + int r, who; struct sam3_chip *pChip; pChip = get_current_sam3(CMD_CTX); - if (!pChip) { + if (!pChip) return ERROR_OK; - } if (pChip->target->state != TARGET_HALTED) { LOG_ERROR("sam3 - target not halted"); return ERROR_TARGET_NOT_HALTED; } - if (pChip->details.bank[0].pBank == NULL) { command_print(CMD_CTX, "Bank0 must be defined first via: flash bank %s ...", - at91sam3_flash.name); + at91sam3_flash.name); return ERROR_FAIL; } if (!pChip->details.bank[0].probed) { r = sam3_auto_probe(pChip->details.bank[0].pBank); - if (r != ERROR_OK) { + if (r != ERROR_OK) return r; - } } switch (CMD_ARGC) { - default: - return ERROR_COMMAND_SYNTAX_ERROR; - break; - case 0: - goto showall; - break; - case 1: - who = -1; - break; - case 2: - if ((0 == strcmp(CMD_ARGV[0], "show")) && (0 == strcmp(CMD_ARGV[1], "all"))) { + default: + return ERROR_COMMAND_SYNTAX_ERROR; + break; + case 0: + goto showall; + break; + case 1: who = -1; - } else { - uint32_t v32; - COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], v32); - who = v32; - } - break; + break; + case 2: + if ((0 == strcmp(CMD_ARGV[0], "show")) && (0 == strcmp(CMD_ARGV[1], "all"))) + who = -1; + else { + uint32_t v32; + COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], v32); + who = v32; + } + break; } if (0 == strcmp("show", CMD_ARGV[0])) { if (who == -1) { showall: r = ERROR_OK; - for (x = 0 ; x < pChip->details.n_gpnvms ; x++) { + for (x = 0; x < pChip->details.n_gpnvms; x++) { r = FLASHD_GetGPNVM(&(pChip->details.bank[0]), x, &v); - if (r != ERROR_OK) { + if (r != ERROR_OK) break; - } command_print(CMD_CTX, "sam3-gpnvm%u: %u", x, v); } return r; @@ -3161,12 +3016,12 @@ showall: return ERROR_COMMAND_SYNTAX_ERROR; } - if (0 == strcmp("set", CMD_ARGV[0])) { + if (0 == strcmp("set", CMD_ARGV[0])) r = FLASHD_SetGPNVM(&(pChip->details.bank[0]), who); - } else if ((0 == strcmp("clr", CMD_ARGV[0])) || - (0 == strcmp("clear", CMD_ARGV[0]))) { // quietly accept both + else if ((0 == strcmp("clr", CMD_ARGV[0])) || + (0 == strcmp("clear", CMD_ARGV[0]))) /* quietly accept both */ r = FLASHD_ClrGPNVM(&(pChip->details.bank[0]), who); - } else { + else { command_print(CMD_CTX, "Unknown command: %s", CMD_ARGV[0]); r = ERROR_COMMAND_SYNTAX_ERROR; } @@ -3178,37 +3033,35 @@ COMMAND_HANDLER(sam3_handle_slowclk_command) struct sam3_chip *pChip; pChip = get_current_sam3(CMD_CTX); - if (!pChip) { + if (!pChip) return ERROR_OK; - } - switch (CMD_ARGC) { - case 0: - // show - break; - case 1: - { - // set - uint32_t v; - COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], v); - if (v > 200000) { - // absurd slow clock of 200Khz? - command_print(CMD_CTX,"Absurd/illegal slow clock freq: %d\n", (int)(v)); - return ERROR_COMMAND_SYNTAX_ERROR; + case 0: + /* show */ + break; + case 1: + { + /* set */ + uint32_t v; + COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], v); + if (v > 200000) { + /* absurd slow clock of 200Khz? */ + command_print(CMD_CTX, "Absurd/illegal slow clock freq: %d\n", (int)(v)); + return ERROR_COMMAND_SYNTAX_ERROR; + } + pChip->cfg.slow_freq = v; + break; } - pChip->cfg.slow_freq = v; - break; - } - default: - // error - command_print(CMD_CTX,"Too many parameters"); - return ERROR_COMMAND_SYNTAX_ERROR; - break; + default: + /* error */ + command_print(CMD_CTX, "Too many parameters"); + return ERROR_COMMAND_SYNTAX_ERROR; + break; } command_print(CMD_CTX, "Slowclk freq: %d.%03dkhz", - (int)(pChip->cfg.slow_freq/ 1000), - (int)(pChip->cfg.slow_freq% 1000)); + (int)(pChip->cfg.slow_freq / 1000), + (int)(pChip->cfg.slow_freq % 1000)); return ERROR_OK; } diff --git a/src/flash/nor/at91sam7.c b/src/flash/nor/at91sam7.c index c2506be3..e46122ad 100644 --- a/src/flash/nor/at91sam7.c +++ b/src/flash/nor/at91sam7.c @@ -52,55 +52,54 @@ #include "imp.h" #include - /* AT91SAM7 control registers */ -#define DBGU_CIDR 0xFFFFF240 -#define CKGR_MCFR 0xFFFFFC24 -#define CKGR_MOR 0xFFFFFC20 -#define CKGR_MCFR_MAINRDY 0x10000 -#define CKGR_PLLR 0xFFFFFC2c -#define CKGR_PLLR_DIV 0xff -#define CKGR_PLLR_MUL 0x07ff0000 -#define PMC_MCKR 0xFFFFFC30 -#define PMC_MCKR_CSS 0x03 -#define PMC_MCKR_PRES 0x1c +#define DBGU_CIDR 0xFFFFF240 +#define CKGR_MCFR 0xFFFFFC24 +#define CKGR_MOR 0xFFFFFC20 +#define CKGR_MCFR_MAINRDY 0x10000 +#define CKGR_PLLR 0xFFFFFC2c +#define CKGR_PLLR_DIV 0xff +#define CKGR_PLLR_MUL 0x07ff0000 +#define PMC_MCKR 0xFFFFFC30 +#define PMC_MCKR_CSS 0x03 +#define PMC_MCKR_PRES 0x1c /* Flash Controller Commands */ -#define WP 0x01 -#define SLB 0x02 -#define WPL 0x03 -#define CLB 0x04 -#define EA 0x08 -#define SGPB 0x0B -#define CGPB 0x0D -#define SSB 0x0F +#define WP 0x01 +#define SLB 0x02 +#define WPL 0x03 +#define CLB 0x04 +#define EA 0x08 +#define SGPB 0x0B +#define CGPB 0x0D +#define SSB 0x0F /* MC_FSR bit definitions */ -#define MC_FSR_FRDY 1 -#define MC_FSR_EOL 2 +#define MC_FSR_FRDY 1 +#define MC_FSR_EOL 2 /* AT91SAM7 constants */ -#define RC_FREQ 32000 +#define RC_FREQ 32000 /* Flash timing modes */ -#define FMR_TIMING_NONE 0 -#define FMR_TIMING_NVBITS 1 -#define FMR_TIMING_FLASH 2 +#define FMR_TIMING_NONE 0 +#define FMR_TIMING_NVBITS 1 +#define FMR_TIMING_FLASH 2 /* Flash size constants */ -#define FLASH_SIZE_8KB 1 -#define FLASH_SIZE_16KB 2 -#define FLASH_SIZE_32KB 3 -#define FLASH_SIZE_64KB 5 -#define FLASH_SIZE_128KB 7 -#define FLASH_SIZE_256KB 9 -#define FLASH_SIZE_512KB 10 -#define FLASH_SIZE_1024KB 12 -#define FLASH_SIZE_2048KB 14 - +#define FLASH_SIZE_8KB 1 +#define FLASH_SIZE_16KB 2 +#define FLASH_SIZE_32KB 3 +#define FLASH_SIZE_64KB 5 +#define FLASH_SIZE_128KB 7 +#define FLASH_SIZE_256KB 9 +#define FLASH_SIZE_512KB 10 +#define FLASH_SIZE_1024KB 12 +#define FLASH_SIZE_2048KB 14 static int at91sam7_protect_check(struct flash_bank *bank); -static int at91sam7_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, uint32_t count); +static int at91sam7_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, + uint32_t count); static uint32_t at91sam7_get_flash_status(struct target *target, int bank_number); static void at91sam7_set_flash_mode(struct flash_bank *bank, int mode); @@ -111,10 +110,11 @@ static uint32_t MC_FMR[4] = { 0xFFFFFF60, 0xFFFFFF70, 0xFFFFFF80, 0xFFFFFF90 }; static uint32_t MC_FCR[4] = { 0xFFFFFF64, 0xFFFFFF74, 0xFFFFFF84, 0xFFFFFF94 }; static uint32_t MC_FSR[4] = { 0xFFFFFF68, 0xFFFFFF78, 0xFFFFFF88, 0xFFFFFF98 }; -static char * EPROC[8]= {"Unknown","ARM946-E","ARM7TDMI","Unknown","ARM920T","ARM926EJ-S","Unknown","Unknown"}; +static char *EPROC[8] = { + "Unknown", "ARM946-E", "ARM7TDMI", "Unknown", "ARM920T", "ARM926EJ-S", "Unknown", "Unknown" +}; -struct at91sam7_flash_bank -{ +struct at91sam7_flash_bank { /* chip id register */ uint32_t cidr; uint16_t cidr_ext; @@ -128,7 +128,7 @@ struct at91sam7_flash_bank const char *target_name; /* flash auto-detection */ - uint8_t flash_autodetection; + uint8_t flash_autodetection; /* flash geometry */ uint16_t pages_per_sector; @@ -141,15 +141,15 @@ struct at91sam7_flash_bank uint16_t num_nvmbits; uint16_t num_nvmbits_on; uint16_t nvmbits; - uint8_t securitybit; + uint8_t securitybit; /* 0: not init * 1: fmcn for nvbits (1uS) * 2: fmcn for flash (1.5uS) */ - uint8_t flashmode; + uint8_t flashmode; /* main clock status */ - uint8_t mck_valid; + uint8_t mck_valid; uint32_t mck_freq; /* external clock frequency */ @@ -178,7 +178,6 @@ static long SRAMSIZ[16] = { }; #endif - static uint32_t at91sam7_get_flash_status(struct target *target, int bank_number) { uint32_t fsr; @@ -206,8 +205,7 @@ static void at91sam7_read_clock_info(struct flash_bank *bank) at91sam7_info->mck_valid = 0; at91sam7_info->mck_freq = 0; - switch (mckr & PMC_MCKR_CSS) - { + switch (mckr & PMC_MCKR_CSS) { case 0: /* Slow Clock */ at91sam7_info->mck_valid = 1; tmp = RC_FREQ; @@ -215,13 +213,10 @@ static void at91sam7_read_clock_info(struct flash_bank *bank) case 1: /* Main Clock */ if ((mcfr & CKGR_MCFR_MAINRDY) && - (at91sam7_info->ext_freq == 0)) - { + (at91sam7_info->ext_freq == 0)) { at91sam7_info->mck_valid = 1; tmp = RC_FREQ / 16ul * (mcfr & 0xffff); - } - else if (at91sam7_info->ext_freq != 0) - { + } else if (at91sam7_info->ext_freq != 0) { at91sam7_info->mck_valid = 1; tmp = at91sam7_info->ext_freq; } @@ -232,35 +227,30 @@ static void at91sam7_read_clock_info(struct flash_bank *bank) case 3: /* PLL Clock */ if ((mcfr & CKGR_MCFR_MAINRDY) && - (at91sam7_info->ext_freq == 0)) - { + (at91sam7_info->ext_freq == 0)) { target_read_u32(target, CKGR_PLLR, &pllr); if (!(pllr & CKGR_PLLR_DIV)) - break; /* 0 Hz */ + break; /* 0 Hz */ at91sam7_info->mck_valid = 1; mainfreq = RC_FREQ / 16ul * (mcfr & 0xffff); /* Integer arithmetic should have sufficient precision * as long as PLL is properly configured. */ tmp = mainfreq / (pllr & CKGR_PLLR_DIV)* - (((pllr & CKGR_PLLR_MUL) >> 16) + 1); - } - else if ((at91sam7_info->ext_freq != 0) && - ((pllr&CKGR_PLLR_DIV) != 0)) - { + (((pllr & CKGR_PLLR_MUL) >> 16) + 1); + } else if ((at91sam7_info->ext_freq != 0) && + ((pllr&CKGR_PLLR_DIV) != 0)) { at91sam7_info->mck_valid = 1; tmp = at91sam7_info->ext_freq / (pllr&CKGR_PLLR_DIV)* - (((pllr & CKGR_PLLR_MUL) >> 16) + 1); + (((pllr & CKGR_PLLR_MUL) >> 16) + 1); } break; } /* Prescaler adjust */ - if ((((mckr & PMC_MCKR_PRES) >> 2) == 7) || (tmp == 0)) - { + if ((((mckr & PMC_MCKR_PRES) >> 2) == 7) || (tmp == 0)) { at91sam7_info->mck_valid = 0; at91sam7_info->mck_freq = 0; - } - else if (((mckr & PMC_MCKR_PRES) >> 2) != 0) + } else if (((mckr & PMC_MCKR_PRES) >> 2) != 0) at91sam7_info->mck_freq = tmp >> ((mckr & PMC_MCKR_PRES) >> 2); else at91sam7_info->mck_freq = tmp; @@ -273,24 +263,17 @@ static void at91sam7_set_flash_mode(struct flash_bank *bank, int mode) struct at91sam7_flash_bank *at91sam7_info = bank->driver_priv; struct target *target = bank->target; - if (mode && (mode != at91sam7_info->flashmode)) - { + if (mode && (mode != at91sam7_info->flashmode)) { /* Always round up (ceil) */ - if (mode == FMR_TIMING_NVBITS) - { - if (at91sam7_info->cidr_arch == 0x60) - { + if (mode == FMR_TIMING_NVBITS) { + if (at91sam7_info->cidr_arch == 0x60) { /* AT91SAM7A3 uses master clocks in 100 ns */ fmcn = (at91sam7_info->mck_freq/10000000ul) + 1; - } - else - { + } else { /* master clocks in 1uS for ARCH 0x7 types */ fmcn = (at91sam7_info->mck_freq/1000000ul) + 1; } - } - else if (mode == FMR_TIMING_FLASH) - { + } else if (mode == FMR_TIMING_FLASH) { /* main clocks in 1.5uS */ fmcn = (at91sam7_info->mck_freq/1000000ul)+ (at91sam7_info->mck_freq/2000000ul) + 1; @@ -319,16 +302,15 @@ static uint32_t at91sam7_wait_status_busy(struct flash_bank *bank, uint32_t wait { uint32_t status; - while ((!((status = at91sam7_get_flash_status(bank->target, bank->bank_number)) & waitbits)) && (timeout-- > 0)) - { + while ((!((status = at91sam7_get_flash_status(bank->target, + bank->bank_number)) & waitbits)) && (timeout-- > 0)) { LOG_DEBUG("status[%i]: 0x%" PRIx32 "", (int)bank->bank_number, status); alive_sleep(1); } LOG_DEBUG("status[%i]: 0x%" PRIx32 "", bank->bank_number, status); - if (status & 0x0C) - { + if (status & 0x0C) { LOG_ERROR("status register: 0x%" PRIx32 "", status); if (status & 0x4) LOG_ERROR("Lock Error Bit Detected, Operation Abort"); @@ -350,22 +332,20 @@ static int at91sam7_flash_command(struct flash_bank *bank, uint8_t cmd, uint16_t fcr = (0x5A << 24) | ((pagen&0x3FF) << 8) | cmd; target_write_u32(target, MC_FCR[bank->bank_number], fcr); - LOG_DEBUG("Flash command: 0x%" PRIx32 ", flash bank: %i, page number: %u", fcr, bank->bank_number + 1, pagen); + LOG_DEBUG("Flash command: 0x%" PRIx32 ", flash bank: %i, page number: %u", + fcr, + bank->bank_number + 1, + pagen); - if ((at91sam7_info->cidr_arch == 0x60) && ((cmd == SLB) | (cmd == CLB))) - { + if ((at91sam7_info->cidr_arch == 0x60) && ((cmd == SLB) | (cmd == CLB))) { /* Lock bit manipulation on AT91SAM7A3 waits for FC_FSR bit 1, EOL */ if (at91sam7_wait_status_busy(bank, MC_FSR_EOL, 10)&0x0C) - { return ERROR_FLASH_OPERATION_FAILED; - } return ERROR_OK; } if (at91sam7_wait_status_busy(bank, MC_FSR_FRDY, 10)&0x0C) - { return ERROR_FLASH_OPERATION_FAILED; - } return ERROR_OK; } @@ -392,14 +372,12 @@ static int at91sam7_read_part_info(struct flash_bank *bank) at91sam7_info = t_bank->driver_priv; - if (at91sam7_info->cidr != 0) - { + if (at91sam7_info->cidr != 0) { /* flash already configured, update clock and check for protected sectors */ struct flash_bank *fb = bank; t_bank = fb; - while (t_bank) - { + while (t_bank) { /* re-calculate master clock frequency */ at91sam7_read_clock_info(t_bank); @@ -418,19 +396,16 @@ static int at91sam7_read_part_info(struct flash_bank *bank) /* Read and parse chip identification register */ target_read_u32(target, DBGU_CIDR, &cidr); - if (cidr == 0) - { + if (cidr == 0) { LOG_WARNING("Cannot identify target as an AT91SAM"); return ERROR_FLASH_OPERATION_FAILED; } - if (at91sam7_info->flash_autodetection == 0) - { + if (at91sam7_info->flash_autodetection == 0) { /* banks and sectors are already created, based on data from input file */ struct flash_bank *fb = bank; t_bank = fb; - while (t_bank) - { + while (t_bank) { at91sam7_info = t_bank->driver_priv; at91sam7_info->cidr = cidr; @@ -462,8 +437,7 @@ static int at91sam7_read_part_info(struct flash_bank *bank) arch = (cidr >> 20)&0x00FF; /* check flash size */ - switch ((cidr >> 8)&0x000F) - { + switch ((cidr >> 8)&0x000F) { case FLASH_SIZE_8KB: break; @@ -473,8 +447,7 @@ static int at91sam7_read_part_info(struct flash_bank *bank) pages_per_sector = 32; page_size = 64; base_address = 0x00100000; - if (arch == 0x70) - { + if (arch == 0x70) { num_nvmbits = 2; target_name_t = "AT91SAM7S161/16"; } @@ -486,13 +459,11 @@ static int at91sam7_read_part_info(struct flash_bank *bank) pages_per_sector = 32; page_size = 128; base_address = 0x00100000; - if (arch == 0x70) - { + if (arch == 0x70) { num_nvmbits = 2; target_name_t = "AT91SAM7S321/32"; } - if (arch == 0x72) - { + if (arch == 0x72) { num_nvmbits = 3; target_name_t = "AT91SAM7SE32"; } @@ -504,8 +475,7 @@ static int at91sam7_read_part_info(struct flash_bank *bank) pages_per_sector = 32; page_size = 128; base_address = 0x00100000; - if (arch == 0x70) - { + if (arch == 0x70) { num_nvmbits = 2; target_name_t = "AT91SAM7S64"; } @@ -517,23 +487,19 @@ static int at91sam7_read_part_info(struct flash_bank *bank) pages_per_sector = 64; page_size = 256; base_address = 0x00100000; - if (arch == 0x70) - { + if (arch == 0x70) { num_nvmbits = 2; target_name_t = "AT91SAM7S128"; } - if (arch == 0x71) - { + if (arch == 0x71) { num_nvmbits = 3; target_name_t = "AT91SAM7XC128"; } - if (arch == 0x72) - { + if (arch == 0x72) { num_nvmbits = 3; target_name_t = "AT91SAM7SE128"; } - if (arch == 0x75) - { + if (arch == 0x75) { num_nvmbits = 3; target_name_t = "AT91SAM7X128"; } @@ -545,28 +511,23 @@ static int at91sam7_read_part_info(struct flash_bank *bank) pages_per_sector = 64; page_size = 256; base_address = 0x00100000; - if (arch == 0x60) - { + if (arch == 0x60) { num_nvmbits = 3; target_name_t = "AT91SAM7A3"; } - if (arch == 0x70) - { + if (arch == 0x70) { num_nvmbits = 2; target_name_t = "AT91SAM7S256"; } - if (arch == 0x71) - { + if (arch == 0x71) { num_nvmbits = 3; target_name_t = "AT91SAM7XC256"; } - if (arch == 0x72) - { + if (arch == 0x72) { num_nvmbits = 3; target_name_t = "AT91SAM7SE256"; } - if (arch == 0x75) - { + if (arch == 0x75) { num_nvmbits = 3; target_name_t = "AT91SAM7X256"; } @@ -578,23 +539,19 @@ static int at91sam7_read_part_info(struct flash_bank *bank) pages_per_sector = 64; page_size = 256; base_address = 0x00100000; - if (arch == 0x70) - { + if (arch == 0x70) { num_nvmbits = 2; target_name_t = "AT91SAM7S512"; } - if (arch == 0x71) - { + if (arch == 0x71) { num_nvmbits = 3; target_name_t = "AT91SAM7XC512"; } - if (arch == 0x72) - { + if (arch == 0x72) { num_nvmbits = 3; target_name_t = "AT91SAM7SE512"; } - if (arch == 0x75) - { + if (arch == 0x75) { num_nvmbits = 3; target_name_t = "AT91SAM7X512"; } @@ -607,9 +564,9 @@ static int at91sam7_read_part_info(struct flash_bank *bank) break; } - if (strcmp(target_name_t, "Unknown") == 0) - { - LOG_ERROR("Target autodetection failed! Please specify target parameters in configuration file"); + if (strcmp(target_name_t, "Unknown") == 0) { + LOG_ERROR( + "Target autodetection failed! Please specify target parameters in configuration file"); return ERROR_FLASH_OPERATION_FAILED; } @@ -618,10 +575,8 @@ static int at91sam7_read_part_info(struct flash_bank *bank) /* calculate bank size */ bank_size = sectors_num * pages_per_sector * page_size; - for (bnk = 0; bnk < banks_num; bnk++) - { - if (bnk > 0) - { + for (bnk = 0; bnk < banks_num; bnk++) { + if (bnk > 0) { if (!t_bank->next) { /* create a new flash bank element */ struct flash_bank *fb = malloc(sizeof(struct flash_bank)); @@ -646,8 +601,7 @@ static int at91sam7_read_part_info(struct flash_bank *bank) /* allocate sectors */ t_bank->sectors = malloc(sectors_num * sizeof(struct flash_sector)); - for (sec = 0; sec < sectors_num; sec++) - { + for (sec = 0; sec < sectors_num; sec++) { t_bank->sectors[sec].offset = sec * pages_per_sector * page_size; t_bank->sectors[sec].size = pages_per_sector * page_size; t_bank->sectors[sec].is_erased = -1; @@ -684,7 +638,9 @@ static int at91sam7_read_part_info(struct flash_bank *bank) at91sam7_protect_check(t_bank); } - LOG_DEBUG("nvptyp: 0x%3.3x, arch: 0x%4.4x", at91sam7_info->cidr_nvptyp, at91sam7_info->cidr_arch); + LOG_DEBUG("nvptyp: 0x%3.3x, arch: 0x%4.4x", + at91sam7_info->cidr_nvptyp, + at91sam7_info->cidr_arch); return ERROR_OK; } @@ -699,8 +655,7 @@ static int at91sam7_erase_check(struct flash_bank *bank) uint16_t nSector; uint16_t nByte; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -710,12 +665,12 @@ static int at91sam7_erase_check(struct flash_bank *bank) at91sam7_set_flash_mode(bank, FMR_TIMING_FLASH); fast_check = 1; - for (nSector = 0; nSector < bank->num_sectors; nSector++) - { - retval = target_blank_check_memory(target, bank->base + bank->sectors[nSector].offset, - bank->sectors[nSector].size, &blank); - if (retval != ERROR_OK) - { + for (nSector = 0; nSector < bank->num_sectors; nSector++) { + retval = target_blank_check_memory(target, + bank->base + bank->sectors[nSector].offset, + bank->sectors[nSector].size, + &blank); + if (retval != ERROR_OK) { fast_check = 0; break; } @@ -726,25 +681,20 @@ static int at91sam7_erase_check(struct flash_bank *bank) } if (fast_check) - { return ERROR_OK; - } LOG_USER("Running slow fallback erase check - add working memory"); buffer = malloc(bank->sectors[0].size); - for (nSector = 0; nSector < bank->num_sectors; nSector++) - { + for (nSector = 0; nSector < bank->num_sectors; nSector++) { bank->sectors[nSector].is_erased = 1; retval = target_read_memory(target, bank->base + bank->sectors[nSector].offset, 4, - bank->sectors[nSector].size/4, buffer); + bank->sectors[nSector].size/4, buffer); if (retval != ERROR_OK) return retval; - for (nByte = 0; nByte < bank->sectors[nSector].size; nByte++) - { - if (buffer[nByte] != 0xFF) - { + for (nByte = 0; nByte < bank->sectors[nSector].size; nByte++) { + if (buffer[nByte] != 0xFF) { bank->sectors[nSector].is_erased = 0; break; } @@ -763,11 +713,8 @@ static int at91sam7_protect_check(struct flash_bank *bank) struct at91sam7_flash_bank *at91sam7_info = bank->driver_priv; if (at91sam7_info->cidr == 0) - { return ERROR_FLASH_BANK_NOT_PROBED; - } - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -776,14 +723,11 @@ static int at91sam7_protect_check(struct flash_bank *bank) at91sam7_info->lockbits = (status >> 16); at91sam7_info->num_lockbits_on = 0; - for (lock_pos = 0; lock_pos < bank->num_sectors; lock_pos++) - { - if (((status >> (16 + lock_pos))&(0x0001)) == 1) - { + for (lock_pos = 0; lock_pos < bank->num_sectors; lock_pos++) { + if (((status >> (16 + lock_pos))&(0x0001)) == 1) { at91sam7_info->num_lockbits_on++; bank->sectors[lock_pos].is_protected = 1; - } - else + } else bank->sectors[lock_pos].is_protected = 0; } @@ -794,12 +738,9 @@ static int at91sam7_protect_check(struct flash_bank *bank) at91sam7_info->nvmbits = (status >> 8)&0xFF; at91sam7_info->num_nvmbits_on = 0; - for (gpnvm_pos = 0; gpnvm_pos < at91sam7_info->num_nvmbits; gpnvm_pos++) - { + for (gpnvm_pos = 0; gpnvm_pos < at91sam7_info->num_nvmbits; gpnvm_pos++) { if (((status >> (8 + gpnvm_pos))&(0x01)) == 1) - { at91sam7_info->num_nvmbits_on++; - } } return ERROR_OK; @@ -837,8 +778,7 @@ FLASH_BANK_COMMAND_HANDLER(at91sam7_flash_bank_command) at91sam7_info->ext_freq = 0; at91sam7_info->flash_autodetection = 0; - if (CMD_ARGC < 13) - { + if (CMD_ARGC < 13) { at91sam7_info->flash_autodetection = 1; return ERROR_OK; } @@ -862,8 +802,7 @@ FLASH_BANK_COMMAND_HANDLER(at91sam7_flash_bank_command) } if ((bus_width == 0) || (banks_num == 0) || (num_sectors == 0) || - (pages_per_sector == 0) || (page_size == 0) || (num_nvmbits == 0)) - { + (pages_per_sector == 0) || (page_size == 0) || (num_nvmbits == 0)) { at91sam7_info->flash_autodetection = 1; return ERROR_OK; } @@ -874,10 +813,8 @@ FLASH_BANK_COMMAND_HANDLER(at91sam7_flash_bank_command) /* calculate bank size */ bank_size = num_sectors * pages_per_sector * page_size; - for (bnk = 0; bnk < banks_num; bnk++) - { - if (bnk > 0) - { + for (bnk = 0; bnk < banks_num; bnk++) { + if (bnk > 0) { if (!t_bank->next) { /* create a new bank element */ struct flash_bank *fb = malloc(sizeof(struct flash_bank)); @@ -902,8 +839,7 @@ FLASH_BANK_COMMAND_HANDLER(at91sam7_flash_bank_command) /* allocate sectors */ t_bank->sectors = malloc(num_sectors * sizeof(struct flash_sector)); - for (sec = 0; sec < num_sectors; sec++) - { + for (sec = 0; sec < num_sectors; sec++) { t_bank->sectors[sec].offset = sec * pages_per_sector * page_size; t_bank->sectors[sec].size = pages_per_sector * page_size; t_bank->sectors[sec].is_erased = -1; @@ -933,61 +869,43 @@ static int at91sam7_erase(struct flash_bank *bank, int first, int last) uint8_t erase_all; if (at91sam7_info->cidr == 0) - { return ERROR_FLASH_BANK_NOT_PROBED; - } - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } if ((first < 0) || (last < first) || (last >= bank->num_sectors)) - { return ERROR_FLASH_SECTOR_INVALID; - } erase_all = 0; if ((first == 0) && (last == (bank->num_sectors-1))) - { erase_all = 1; - } /* Configure the flash controller timing */ at91sam7_read_clock_info(bank); at91sam7_set_flash_mode(bank, FMR_TIMING_FLASH); - if (erase_all) - { + if (erase_all) { if (at91sam7_flash_command(bank, EA, 0) != ERROR_OK) - { return ERROR_FLASH_OPERATION_FAILED; - } - } - else - { + } else { /* allocate and clean buffer */ nbytes = (last - first + 1) * bank->sectors[first].size; buffer = malloc(nbytes * sizeof(uint8_t)); for (pos = 0; pos < nbytes; pos++) - { buffer[pos] = 0xFF; - } if (at91sam7_write(bank, buffer, bank->sectors[first].offset, nbytes) != ERROR_OK) - { return ERROR_FLASH_OPERATION_FAILED; - } free(buffer); } /* mark erased sectors */ for (sec = first; sec <= last; sec++) - { bank->sectors[sec].is_erased = 1; - } return ERROR_OK; } @@ -1001,27 +919,21 @@ static int at91sam7_protect(struct flash_bank *bank, int set, int first, int las struct at91sam7_flash_bank *at91sam7_info = bank->driver_priv; if (at91sam7_info->cidr == 0) - { return ERROR_FLASH_BANK_NOT_PROBED; - } - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } if ((first < 0) || (last < first) || (last >= bank->num_sectors)) - { return ERROR_FLASH_SECTOR_INVALID; - } /* Configure the flash controller timing */ at91sam7_read_clock_info(bank); at91sam7_set_flash_mode(bank, FMR_TIMING_NVBITS); - for (sector = first; sector <= last; sector++) - { + for (sector = first; sector <= last; sector++) { if (set) cmd = SLB; else @@ -1032,9 +944,7 @@ static int at91sam7_protect(struct flash_bank *bank, int set, int first, int las pagen = sector * at91sam7_info->pages_per_sector; if (at91sam7_flash_command(bank, cmd, pagen) != ERROR_OK) - { return ERROR_FLASH_OPERATION_FAILED; - } } at91sam7_protect_check(bank); @@ -1051,12 +961,9 @@ static int at91sam7_write(struct flash_bank *bank, uint8_t *buffer, uint32_t off uint32_t first_page, last_page, pagen, buffer_pos; if (at91sam7_info->cidr == 0) - { return ERROR_FLASH_BANK_NOT_PROBED; - } - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -1066,9 +973,10 @@ static int at91sam7_write(struct flash_bank *bank, uint8_t *buffer, uint32_t off dst_min_alignment = at91sam7_info->pagesize; - if (offset % dst_min_alignment) - { - LOG_WARNING("offset 0x%" PRIx32 " breaks required alignment 0x%" PRIx32 "", offset, dst_min_alignment); + if (offset % dst_min_alignment) { + LOG_WARNING("offset 0x%" PRIx32 " breaks required alignment 0x%" PRIx32 "", + offset, + dst_min_alignment); return ERROR_FLASH_DST_BREAKS_ALIGNMENT; } @@ -1078,14 +986,16 @@ static int at91sam7_write(struct flash_bank *bank, uint8_t *buffer, uint32_t off first_page = offset/dst_min_alignment; last_page = DIV_ROUND_UP(offset + count, dst_min_alignment); - LOG_DEBUG("first_page: %i, last_page: %i, count %i", (int)first_page, (int)last_page, (int)count); + LOG_DEBUG("first_page: %i, last_page: %i, count %i", + (int)first_page, + (int)last_page, + (int)count); /* Configure the flash controller timing */ at91sam7_read_clock_info(bank); at91sam7_set_flash_mode(bank, FMR_TIMING_FLASH); - for (pagen = first_page; pagen < last_page; pagen++) - { + for (pagen = first_page; pagen < last_page; pagen++) { if (bytes_remaining < dst_min_alignment) count = bytes_remaining; else @@ -1094,17 +1004,15 @@ static int at91sam7_write(struct flash_bank *bank, uint8_t *buffer, uint32_t off /* Write one block to the PageWriteBuffer */ buffer_pos = (pagen-first_page)*dst_min_alignment; - wcount = DIV_ROUND_UP(count,4); - if ((retval = target_write_memory(target, bank->base + pagen*dst_min_alignment, 4, wcount, buffer + buffer_pos)) != ERROR_OK) - { + wcount = DIV_ROUND_UP(count, 4); + retval = target_write_memory(target, bank->base + pagen*dst_min_alignment, 4, + wcount, buffer + buffer_pos); + if (retval != ERROR_OK) return retval; - } /* Send Write Page command to Flash Controller */ if (at91sam7_flash_command(bank, WP, pagen) != ERROR_OK) - { return ERROR_FLASH_OPERATION_FAILED; - } LOG_DEBUG("Write flash bank:%i page number:%" PRIi32 "", bank->bank_number, pagen); } @@ -1117,8 +1025,7 @@ static int at91sam7_probe(struct flash_bank *bank) * if this is an at91sam7, it has the configured flash */ int retval; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -1136,40 +1043,44 @@ static int get_at91sam7_info(struct flash_bank *bank, char *buf, int buf_size) struct at91sam7_flash_bank *at91sam7_info = bank->driver_priv; if (at91sam7_info->cidr == 0) - { return ERROR_FLASH_BANK_NOT_PROBED; - } printed = snprintf(buf, buf_size, - "\n at91sam7 driver information: Chip is %s\n", - at91sam7_info->target_name); + "\n at91sam7 driver information: Chip is %s\n", + at91sam7_info->target_name); buf += printed; buf_size -= printed; printed = snprintf(buf, - buf_size, - " Cidr: 0x%8.8" PRIx32 " | Arch: 0x%4.4x | Eproc: %s | Version: 0x%3.3x | Flashsize: 0x%8.8" PRIx32 "\n", - at91sam7_info->cidr, - at91sam7_info->cidr_arch, - EPROC[at91sam7_info->cidr_eproc], - at91sam7_info->cidr_version, - bank->size); + buf_size, + " Cidr: 0x%8.8" PRIx32 " | Arch: 0x%4.4x | Eproc: %s | Version: 0x%3.3x | " + "Flashsize: 0x%8.8" PRIx32 "\n", + at91sam7_info->cidr, + at91sam7_info->cidr_arch, + EPROC[at91sam7_info->cidr_eproc], + at91sam7_info->cidr_version, + bank->size); buf += printed; buf_size -= printed; printed = snprintf(buf, buf_size, - " Master clock (estimated): %u KHz | External clock: %u KHz\n", - (unsigned)(at91sam7_info->mck_freq / 1000), (unsigned)(at91sam7_info->ext_freq / 1000)); + " Master clock (estimated): %u KHz | External clock: %u KHz\n", + (unsigned)(at91sam7_info->mck_freq / 1000), + (unsigned)(at91sam7_info->ext_freq / 1000)); buf += printed; buf_size -= printed; - printed = snprintf(buf, buf_size, - " Pagesize: %i bytes | Lockbits(%i): %i 0x%4.4x | Pages in lock region: %i \n", - at91sam7_info->pagesize, bank->num_sectors, at91sam7_info->num_lockbits_on, - at91sam7_info->lockbits, at91sam7_info->pages_per_sector*at91sam7_info->num_lockbits_on); + printed = snprintf(buf, + buf_size, + " Pagesize: %i bytes | Lockbits(%i): %i 0x%4.4x | Pages in lock region: %i\n", + at91sam7_info->pagesize, + bank->num_sectors, + at91sam7_info->num_lockbits_on, + at91sam7_info->lockbits, + at91sam7_info->pages_per_sector*at91sam7_info->num_lockbits_on); buf += printed; buf_size -= printed; @@ -1196,59 +1107,46 @@ COMMAND_HANDLER(at91sam7_handle_gpnvm_command) { struct flash_bank *bank; int bit; - uint8_t flashcmd; + uint8_t flashcmd; uint32_t status; struct at91sam7_flash_bank *at91sam7_info; int retval; if (CMD_ARGC != 2) - { return ERROR_COMMAND_SYNTAX_ERROR; - } bank = get_flash_bank_by_num_noprobe(0); if (bank == NULL) - { return ERROR_FLASH_BANK_INVALID; - } - if (strcmp(bank->driver->name, "at91sam7")) - { + if (strcmp(bank->driver->name, "at91sam7")) { command_print(CMD_CTX, "not an at91sam7 flash bank '%s'", CMD_ARGV[0]); return ERROR_FLASH_BANK_INVALID; } - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("target has to be halted to perform flash operation"); return ERROR_TARGET_NOT_HALTED; } if (strcmp(CMD_ARGV[1], "set") == 0) - { flashcmd = SGPB; - } else if (strcmp(CMD_ARGV[1], "clear") == 0) - { flashcmd = CGPB; - } else - { return ERROR_COMMAND_SYNTAX_ERROR; - } at91sam7_info = bank->driver_priv; - if (at91sam7_info->cidr == 0) - { + if (at91sam7_info->cidr == 0) { retval = at91sam7_read_part_info(bank); if (retval != ERROR_OK) - { return retval; - } } COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], bit); - if ((bit < 0) || (bit >= at91sam7_info->num_nvmbits)) - { - command_print(CMD_CTX, "gpnvm bit '#%s' is out of bounds for target %s", CMD_ARGV[0], at91sam7_info->target_name); + if ((bit < 0) || (bit >= at91sam7_info->num_nvmbits)) { + command_print(CMD_CTX, + "gpnvm bit '#%s' is out of bounds for target %s", + CMD_ARGV[0], + at91sam7_info->target_name); return ERROR_OK; } @@ -1257,13 +1155,14 @@ COMMAND_HANDLER(at91sam7_handle_gpnvm_command) at91sam7_set_flash_mode(bank, FMR_TIMING_NVBITS); if (at91sam7_flash_command(bank, flashcmd, bit) != ERROR_OK) - { return ERROR_FLASH_OPERATION_FAILED; - } /* GPNVM and SECURITY bits apply only for MC_FSR of EFC0 */ status = at91sam7_get_flash_status(bank->target, 0); - LOG_DEBUG("at91sam7_handle_gpnvm_command: cmd 0x%x, value %d, status 0x%" PRIx32, flashcmd, bit, status); + LOG_DEBUG("at91sam7_handle_gpnvm_command: cmd 0x%x, value %d, status 0x%" PRIx32, + flashcmd, + bit, + status); /* check protect state */ at91sam7_protect_check(bank); diff --git a/src/flash/nor/avrf.c b/src/flash/nor/avrf.c index 462aee2c..1dc5f07e 100644 --- a/src/flash/nor/avrf.c +++ b/src/flash/nor/avrf.c @@ -17,6 +17,7 @@ * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ + #ifdef HAVE_CONFIG_H #include "config.h" #endif @@ -24,33 +25,31 @@ #include "imp.h" #include - /* AVR_JTAG_Instructions */ -#define AVR_JTAG_INS_LEN 4 -// Public Instructions: -#define AVR_JTAG_INS_EXTEST 0x00 -#define AVR_JTAG_INS_IDCODE 0x01 -#define AVR_JTAG_INS_SAMPLE_PRELOAD 0x02 -#define AVR_JTAG_INS_BYPASS 0x0F -// AVR Specified Public Instructions: -#define AVR_JTAG_INS_AVR_RESET 0x0C -#define AVR_JTAG_INS_PROG_ENABLE 0x04 -#define AVR_JTAG_INS_PROG_COMMANDS 0x05 -#define AVR_JTAG_INS_PROG_PAGELOAD 0x06 -#define AVR_JTAG_INS_PROG_PAGEREAD 0x07 - -// Data Registers: -#define AVR_JTAG_REG_Bypass_Len 1 -#define AVR_JTAG_REG_DeviceID_Len 32 - -#define AVR_JTAG_REG_Reset_Len 1 -#define AVR_JTAG_REG_JTAGID_Len 32 -#define AVR_JTAG_REG_ProgrammingEnable_Len 16 -#define AVR_JTAG_REG_ProgrammingCommand_Len 15 -#define AVR_JTAG_REG_FlashDataByte_Len 16 - -struct avrf_type -{ +#define AVR_JTAG_INS_LEN 4 +/* Public Instructions: */ +#define AVR_JTAG_INS_EXTEST 0x00 +#define AVR_JTAG_INS_IDCODE 0x01 +#define AVR_JTAG_INS_SAMPLE_PRELOAD 0x02 +#define AVR_JTAG_INS_BYPASS 0x0F +/* AVR Specified Public Instructions: */ +#define AVR_JTAG_INS_AVR_RESET 0x0C +#define AVR_JTAG_INS_PROG_ENABLE 0x04 +#define AVR_JTAG_INS_PROG_COMMANDS 0x05 +#define AVR_JTAG_INS_PROG_PAGELOAD 0x06 +#define AVR_JTAG_INS_PROG_PAGEREAD 0x07 + +/* Data Registers: */ +#define AVR_JTAG_REG_Bypass_Len 1 +#define AVR_JTAG_REG_DeviceID_Len 32 + +#define AVR_JTAG_REG_Reset_Len 1 +#define AVR_JTAG_REG_JTAGID_Len 32 +#define AVR_JTAG_REG_ProgrammingEnable_Len 16 +#define AVR_JTAG_REG_ProgrammingCommand_Len 15 +#define AVR_JTAG_REG_FlashDataByte_Len 16 + +struct avrf_type { char name[15]; uint16_t chip_id; int flash_page_size; @@ -59,26 +58,24 @@ struct avrf_type int eeprom_page_num; }; -struct avrf_flash_bank -{ +struct avrf_flash_bank { int ppage_size; int probed; }; -static struct avrf_type avft_chips_info[] = -{ +static struct avrf_type avft_chips_info[] = { /* name, chip_id, flash_page_size, flash_page_num, * eeprom_page_size, eeprom_page_num */ - {"atmega128", 0x9702, 256, 512, 8, 512}, - {"at90can128", 0x9781, 256, 512, 8, 512}, + {"atmega128", 0x9702, 256, 512, 8, 512}, + {"at90can128", 0x9781, 256, 512, 8, 512}, }; /* avr program functions */ static int avr_jtag_reset(struct avr_common *avr, uint32_t reset) { avr_jtag_sendinstr(avr->jtag_info.tap, NULL, AVR_JTAG_INS_AVR_RESET); - avr_jtag_senddat(avr->jtag_info.tap, NULL, reset ,AVR_JTAG_REG_Reset_Len); + avr_jtag_senddat(avr->jtag_info.tap, NULL, reset, AVR_JTAG_REG_Reset_Len); return ERROR_OK; } @@ -127,42 +124,48 @@ static int avr_jtagprg_chiperase(struct avr_common *avr) do { poll_value = 0; - avr_jtag_senddat(avr->jtag_info.tap, &poll_value, 0x3380, AVR_JTAG_REG_ProgrammingCommand_Len); + avr_jtag_senddat(avr->jtag_info.tap, + &poll_value, + 0x3380, + AVR_JTAG_REG_ProgrammingCommand_Len); if (ERROR_OK != mcu_execute_queue()) - { return ERROR_FAIL; - } LOG_DEBUG("poll_value = 0x%04" PRIx32 "", poll_value); } while (!(poll_value & 0x0200)); return ERROR_OK; } -static int avr_jtagprg_writeflashpage(struct avr_common *avr, uint8_t *page_buf, uint32_t buf_size, uint32_t addr, uint32_t page_size) +static int avr_jtagprg_writeflashpage(struct avr_common *avr, + uint8_t *page_buf, + uint32_t buf_size, + uint32_t addr, + uint32_t page_size) { uint32_t i, poll_value; avr_jtag_sendinstr(avr->jtag_info.tap, NULL, AVR_JTAG_INS_PROG_COMMANDS); avr_jtag_senddat(avr->jtag_info.tap, NULL, 0x2310, AVR_JTAG_REG_ProgrammingCommand_Len); - // load addr high byte - avr_jtag_senddat(avr->jtag_info.tap, NULL, 0x0700 | ((addr >> 9) & 0xFF), AVR_JTAG_REG_ProgrammingCommand_Len); + /* load addr high byte */ + avr_jtag_senddat(avr->jtag_info.tap, + NULL, + 0x0700 | ((addr >> 9) & 0xFF), + AVR_JTAG_REG_ProgrammingCommand_Len); - // load addr low byte - avr_jtag_senddat(avr->jtag_info.tap, NULL, 0x0300 | ((addr >> 1) & 0xFF), AVR_JTAG_REG_ProgrammingCommand_Len); + /* load addr low byte */ + avr_jtag_senddat(avr->jtag_info.tap, + NULL, + 0x0300 | ((addr >> 1) & 0xFF), + AVR_JTAG_REG_ProgrammingCommand_Len); avr_jtag_sendinstr(avr->jtag_info.tap, NULL, AVR_JTAG_INS_PROG_PAGELOAD); - for (i = 0; i < page_size; i++) - { + for (i = 0; i < page_size; i++) { if (i < buf_size) - { avr_jtag_senddat(avr->jtag_info.tap, NULL, page_buf[i], 8); - } else - { avr_jtag_senddat(avr->jtag_info.tap, NULL, 0xFF, 8); - } } avr_jtag_sendinstr(avr->jtag_info.tap, NULL, AVR_JTAG_INS_PROG_COMMANDS); @@ -174,11 +177,12 @@ static int avr_jtagprg_writeflashpage(struct avr_common *avr, uint8_t *page_buf, do { poll_value = 0; - avr_jtag_senddat(avr->jtag_info.tap, &poll_value, 0x3700, AVR_JTAG_REG_ProgrammingCommand_Len); + avr_jtag_senddat(avr->jtag_info.tap, + &poll_value, + 0x3700, + AVR_JTAG_REG_ProgrammingCommand_Len); if (ERROR_OK != mcu_execute_queue()) - { return ERROR_FAIL; - } LOG_DEBUG("poll_value = 0x%04" PRIx32 "", poll_value); } while (!(poll_value & 0x0200)); @@ -190,9 +194,7 @@ FLASH_BANK_COMMAND_HANDLER(avrf_flash_bank_command) struct avrf_flash_bank *avrf_info; if (CMD_ARGC < 6) - { return ERROR_COMMAND_SYNTAX_ERROR; - } avrf_info = malloc(sizeof(struct avrf_flash_bank)); bank->driver_priv = avrf_info; @@ -208,10 +210,9 @@ static int avrf_erase(struct flash_bank *bank, int first, int last) struct avr_common *avr = target->arch_info; int status; - LOG_DEBUG("%s", __FUNCTION__); + LOG_DEBUG("%s", __func__); - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -229,7 +230,7 @@ static int avrf_erase(struct flash_bank *bank, int first, int last) static int avrf_protect(struct flash_bank *bank, int set, int first, int last) { - LOG_INFO("%s", __FUNCTION__); + LOG_INFO("%s", __func__); return ERROR_OK; } @@ -239,16 +240,16 @@ static int avrf_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, struct avr_common *avr = target->arch_info; uint32_t cur_size, cur_buffer_size, page_size; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } page_size = bank->sectors[0].size; - if ((offset % page_size) != 0) - { - LOG_WARNING("offset 0x%" PRIx32 " breaks required %" PRIu32 "-byte alignment", offset, page_size); + if ((offset % page_size) != 0) { + LOG_WARNING("offset 0x%" PRIx32 " breaks required %" PRIu32 "-byte alignment", + offset, + page_size); return ERROR_FLASH_DST_BREAKS_ALIGNMENT; } @@ -256,22 +257,19 @@ static int avrf_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, LOG_DEBUG("count is %" PRId32 "", count); if (ERROR_OK != avr_jtagprg_enterprogmode(avr)) - { return ERROR_FAIL; - } cur_size = 0; - while (count > 0) - { + while (count > 0) { if (count > page_size) - { cur_buffer_size = page_size; - } else - { cur_buffer_size = count; - } - avr_jtagprg_writeflashpage(avr, buffer + cur_size, cur_buffer_size, offset + cur_size, page_size); + avr_jtagprg_writeflashpage(avr, + buffer + cur_size, + cur_buffer_size, + offset + cur_size, + page_size); count -= cur_buffer_size; cur_size += cur_buffer_size; @@ -284,6 +282,7 @@ static int avrf_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, #define EXTRACT_MFG(X) (((X) & 0xffe) >> 1) #define EXTRACT_PART(X) (((X) & 0xffff000) >> 12) #define EXTRACT_VER(X) (((X) & 0xf0000000) >> 28) + static int avrf_probe(struct flash_bank *bank) { struct target *target = bank->target; @@ -293,8 +292,7 @@ static int avrf_probe(struct flash_bank *bank) int i; uint32_t device_id; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -303,42 +301,35 @@ static int avrf_probe(struct flash_bank *bank) avr_jtag_read_jtagid(avr, &device_id); if (ERROR_OK != mcu_execute_queue()) - { return ERROR_FAIL; - } LOG_INFO("device id = 0x%08" PRIx32 "", device_id); if (EXTRACT_MFG(device_id) != 0x1F) - { - LOG_ERROR("0x%" PRIx32 " is invalid Manufacturer for avr, 0x%X is expected", EXTRACT_MFG(device_id), 0x1F); - } + LOG_ERROR("0x%" PRIx32 " is invalid Manufacturer for avr, 0x%X is expected", + EXTRACT_MFG(device_id), + 0x1F); - for (i = 0; i < (int)ARRAY_SIZE(avft_chips_info); i++) - { - if (avft_chips_info[i].chip_id == EXTRACT_PART(device_id)) - { + for (i = 0; i < (int)ARRAY_SIZE(avft_chips_info); i++) { + if (avft_chips_info[i].chip_id == EXTRACT_PART(device_id)) { avr_info = &avft_chips_info[i]; LOG_INFO("target device is %s", avr_info->name); break; } } - if (avr_info != NULL) - { - if (bank->sectors) - { + if (avr_info != NULL) { + if (bank->sectors) { free(bank->sectors); bank->sectors = NULL; } - // chip found + /* chip found */ bank->base = 0x00000000; bank->size = (avr_info->flash_page_size * avr_info->flash_page_num); bank->num_sectors = avr_info->flash_page_num; bank->sectors = malloc(sizeof(struct flash_sector) * avr_info->flash_page_num); - for (i = 0; i < avr_info->flash_page_num; i++) - { + for (i = 0; i < avr_info->flash_page_num; i++) { bank->sectors[i].offset = i * avr_info->flash_page_size; bank->sectors[i].size = avr_info->flash_page_size; bank->sectors[i].is_erased = -1; @@ -347,10 +338,8 @@ static int avrf_probe(struct flash_bank *bank) avrf_info->probed = 1; return ERROR_OK; - } - else - { - // chip not supported + } else { + /* chip not supported */ LOG_ERROR("0x%" PRIx32 " is not support for avr", EXTRACT_PART(device_id)); avrf_info->probed = 1; @@ -368,7 +357,7 @@ static int avrf_auto_probe(struct flash_bank *bank) static int avrf_protect_check(struct flash_bank *bank) { - LOG_INFO("%s", __FUNCTION__); + LOG_INFO("%s", __func__); return ERROR_OK; } @@ -380,28 +369,23 @@ static int avrf_info(struct flash_bank *bank, char *buf, int buf_size) int i; uint32_t device_id; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } avr_jtag_read_jtagid(avr, &device_id); if (ERROR_OK != mcu_execute_queue()) - { return ERROR_FAIL; - } LOG_INFO("device id = 0x%08" PRIx32 "", device_id); if (EXTRACT_MFG(device_id) != 0x1F) - { - LOG_ERROR("0x%" PRIx32 " is invalid Manufacturer for avr, 0x%X is expected", EXTRACT_MFG(device_id), 0x1F); - } + LOG_ERROR("0x%" PRIx32 " is invalid Manufacturer for avr, 0x%X is expected", + EXTRACT_MFG(device_id), + 0x1F); - for (i = 0; i < (int)ARRAY_SIZE(avft_chips_info); i++) - { - if (avft_chips_info[i].chip_id == EXTRACT_PART(device_id)) - { + for (i = 0; i < (int)ARRAY_SIZE(avft_chips_info); i++) { + if (avft_chips_info[i].chip_id == EXTRACT_PART(device_id)) { avr_info = &avft_chips_info[i]; LOG_INFO("target device is %s", avr_info->name); @@ -409,15 +393,13 @@ static int avrf_info(struct flash_bank *bank, char *buf, int buf_size) } } - if (avr_info != NULL) - { - // chip found - snprintf(buf, buf_size, "%s - Rev: 0x%" PRIx32 "", avr_info->name, EXTRACT_VER(device_id)); + if (avr_info != NULL) { + /* chip found */ + snprintf(buf, buf_size, "%s - Rev: 0x%" PRIx32 "", avr_info->name, + EXTRACT_VER(device_id)); return ERROR_OK; - } - else - { - // chip not supported + } else { + /* chip not supported */ snprintf(buf, buf_size, "Cannot identify target as a avr\n"); return ERROR_FLASH_OPERATION_FAILED; } @@ -428,18 +410,15 @@ static int avrf_mass_erase(struct flash_bank *bank) struct target *target = bank->target; struct avr_common *avr = target->arch_info; - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } if ((ERROR_OK != avr_jtagprg_enterprogmode(avr)) - || (ERROR_OK != avr_jtagprg_chiperase(avr)) - || (ERROR_OK != avr_jtagprg_leaveprogmode(avr))) - { + || (ERROR_OK != avr_jtagprg_chiperase(avr)) + || (ERROR_OK != avr_jtagprg_leaveprogmode(avr))) return ERROR_FAIL; - } return ERROR_OK; } @@ -449,31 +428,23 @@ COMMAND_HANDLER(avrf_handle_mass_erase_command) int i; if (CMD_ARGC < 1) - { return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); if (ERROR_OK != retval) return retval; - if (avrf_mass_erase(bank) == ERROR_OK) - { + if (avrf_mass_erase(bank) == ERROR_OK) { /* set all sectors as erased */ for (i = 0; i < bank->num_sectors; i++) - { bank->sectors[i].is_erased = 1; - } command_print(CMD_CTX, "avr mass erase complete"); - } - else - { + } else command_print(CMD_CTX, "avr mass erase failed"); - } - LOG_DEBUG("%s", __FUNCTION__); + LOG_DEBUG("%s", __func__); return ERROR_OK; } diff --git a/src/flash/nor/cfi.c b/src/flash/nor/cfi.c index 98633795..0d8c694e 100644 --- a/src/flash/nor/cfi.c +++ b/src/flash/nor/cfi.c @@ -21,6 +21,7 @@ * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ + #ifdef HAVE_CONFIG_H #include "config.h" #endif @@ -35,19 +36,17 @@ #include #include - -#define CFI_MAX_BUS_WIDTH 4 -#define CFI_MAX_CHIP_WIDTH 4 +#define CFI_MAX_BUS_WIDTH 4 +#define CFI_MAX_CHIP_WIDTH 4 /* defines internal maximum size for code fragment in cfi_intel_write_block() */ #define CFI_MAX_INTEL_CODESIZE 256 /* some id-types with specific handling */ -#define AT49BV6416 0x00d6 -#define AT49BV6416T 0x00d2 +#define AT49BV6416 0x00d6 +#define AT49BV6416T 0x00d2 -static struct cfi_unlock_addresses cfi_unlock_addresses[] = -{ +static struct cfi_unlock_addresses cfi_unlock_addresses[] = { [CFI_UNLOCK_555_2AA] = { .unlock1 = 0x555, .unlock2 = 0x2aa }, [CFI_UNLOCK_5555_2AAA] = { .unlock1 = 0x5555, .unlock2 = 0x2aaa }, }; @@ -60,23 +59,36 @@ static void cfi_fixup_0002_write_buffer(struct flash_bank *bank, void *param); /* fixup after reading cmdset 0002 primary query table */ static const struct cfi_fixup cfi_0002_fixups[] = { - {CFI_MFR_SST, 0x00D4, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]}, - {CFI_MFR_SST, 0x00D5, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]}, - {CFI_MFR_SST, 0x00D6, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]}, - {CFI_MFR_SST, 0x00D7, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]}, - {CFI_MFR_SST, 0x2780, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]}, - {CFI_MFR_SST, 0x274b, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]}, - {CFI_MFR_SST, 0x236d, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_555_2AA]}, + {CFI_MFR_SST, 0x00D4, cfi_fixup_0002_unlock_addresses, + &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]}, + {CFI_MFR_SST, 0x00D5, cfi_fixup_0002_unlock_addresses, + &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]}, + {CFI_MFR_SST, 0x00D6, cfi_fixup_0002_unlock_addresses, + &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]}, + {CFI_MFR_SST, 0x00D7, cfi_fixup_0002_unlock_addresses, + &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]}, + {CFI_MFR_SST, 0x2780, cfi_fixup_0002_unlock_addresses, + &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]}, + {CFI_MFR_SST, 0x274b, cfi_fixup_0002_unlock_addresses, + &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]}, + {CFI_MFR_SST, 0x236d, cfi_fixup_0002_unlock_addresses, + &cfi_unlock_addresses[CFI_UNLOCK_555_2AA]}, {CFI_MFR_ATMEL, 0x00C8, cfi_fixup_reversed_erase_regions, NULL}, - {CFI_MFR_ST, 0x22C4, cfi_fixup_reversed_erase_regions, NULL}, /* M29W160ET */ - {CFI_MFR_FUJITSU, 0x22ea, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_555_2AA]}, - {CFI_MFR_FUJITSU, 0x226b, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]}, - {CFI_MFR_AMIC, 0xb31a, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_555_2AA]}, - {CFI_MFR_MX, 0x225b, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_555_2AA]}, - {CFI_MFR_EON, 0x225b, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_555_2AA]}, - {CFI_MFR_AMD, 0x225b, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_555_2AA]}, + {CFI_MFR_ST, 0x22C4, cfi_fixup_reversed_erase_regions, NULL}, /* M29W160ET */ + {CFI_MFR_FUJITSU, 0x22ea, cfi_fixup_0002_unlock_addresses, + &cfi_unlock_addresses[CFI_UNLOCK_555_2AA]}, + {CFI_MFR_FUJITSU, 0x226b, cfi_fixup_0002_unlock_addresses, + &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]}, + {CFI_MFR_AMIC, 0xb31a, cfi_fixup_0002_unlock_addresses, + &cfi_unlock_addresses[CFI_UNLOCK_555_2AA]}, + {CFI_MFR_MX, 0x225b, cfi_fixup_0002_unlock_addresses, + &cfi_unlock_addresses[CFI_UNLOCK_555_2AA]}, + {CFI_MFR_EON, 0x225b, cfi_fixup_0002_unlock_addresses, + &cfi_unlock_addresses[CFI_UNLOCK_555_2AA]}, + {CFI_MFR_AMD, 0x225b, cfi_fixup_0002_unlock_addresses, + &cfi_unlock_addresses[CFI_UNLOCK_555_2AA]}, {CFI_MFR_ANY, CFI_ID_ANY, cfi_fixup_0002_erase_regions, NULL}, - {CFI_MFR_ST, 0x227E, cfi_fixup_0002_write_buffer, NULL}, /* M29W128G */ + {CFI_MFR_ST, 0x227E, cfi_fixup_0002_write_buffer, NULL},/* M29W128G */ {0, 0, NULL, NULL} }; @@ -90,30 +102,26 @@ static void cfi_fixup(struct flash_bank *bank, const struct cfi_fixup *fixups) struct cfi_flash_bank *cfi_info = bank->driver_priv; const struct cfi_fixup *f; - for (f = fixups; f->fixup; f++) - { + for (f = fixups; f->fixup; f++) { if (((f->mfr == CFI_MFR_ANY) || (f->mfr == cfi_info->manufacturer)) && - ((f->id == CFI_ID_ANY) || (f->id == cfi_info->device_id))) - { + ((f->id == CFI_ID_ANY) || (f->id == cfi_info->device_id))) f->fixup(bank, f->param); - } } } /* inline uint32_t flash_address(struct flash_bank *bank, int sector, uint32_t offset) */ -static __inline__ uint32_t flash_address(struct flash_bank *bank, int sector, uint32_t offset) +static inline uint32_t flash_address(struct flash_bank *bank, int sector, uint32_t offset) { struct cfi_flash_bank *cfi_info = bank->driver_priv; - if (cfi_info->x16_as_x8) offset *= 2; + if (cfi_info->x16_as_x8) + offset *= 2; /* while the sector list isn't built, only accesses to sector 0 work */ if (sector == 0) return bank->base + offset * bank->bus_width; - else - { - if (!bank->sectors) - { + else { + if (!bank->sectors) { LOG_ERROR("BUG: sector list not yet built"); exit(-1); } @@ -131,19 +139,12 @@ static void cfi_command(struct flash_bank *bank, uint8_t cmd, uint8_t *cmd_buf) for (i = 0; i < CFI_MAX_BUS_WIDTH; i++) cmd_buf[i] = 0; - if (bank->target->endianness == TARGET_LITTLE_ENDIAN) - { + if (bank->target->endianness == TARGET_LITTLE_ENDIAN) { for (i = bank->bus_width; i > 0; i--) - { *cmd_buf++ = (i & (bank->chip_width - 1)) ? 0x0 : cmd; - } - } - else - { + } else { for (i = 1; i <= bank->bus_width; i++) - { *cmd_buf++ = (i & (bank->chip_width - 1)) ? 0x0 : cmd; - } } } @@ -194,15 +195,12 @@ static int cfi_get_u8(struct flash_bank *bank, int sector, uint32_t offset, uint if (retval != ERROR_OK) return retval; - if (bank->target->endianness == TARGET_LITTLE_ENDIAN) - { + if (bank->target->endianness == TARGET_LITTLE_ENDIAN) { for (i = 0; i < bank->bus_width / bank->chip_width; i++) data[0] |= data[i]; *val = data[0]; - } - else - { + } else { uint8_t value = 0; for (i = 0; i < bank->bus_width / bank->chip_width; i++) value |= data[bank->bus_width - 1 - i]; @@ -219,18 +217,15 @@ static int cfi_query_u16(struct flash_bank *bank, int sector, uint32_t offset, u uint8_t data[CFI_MAX_BUS_WIDTH * 2]; int retval; - if (cfi_info->x16_as_x8) - { + if (cfi_info->x16_as_x8) { uint8_t i; - for (i = 0;i < 2;i++) - { + for (i = 0; i < 2; i++) { retval = target_read_memory(target, flash_address(bank, sector, offset + i), bank->bus_width, 1, &data[i * bank->bus_width]); if (retval != ERROR_OK) return retval; } - } else - { + } else { retval = target_read_memory(target, flash_address(bank, sector, offset), bank->bus_width, 2, data); if (retval != ERROR_OK) @@ -252,19 +247,15 @@ static int cfi_query_u32(struct flash_bank *bank, int sector, uint32_t offset, u uint8_t data[CFI_MAX_BUS_WIDTH * 4]; int retval; - if (cfi_info->x16_as_x8) - { + if (cfi_info->x16_as_x8) { uint8_t i; - for (i = 0;i < 4;i++) - { + for (i = 0; i < 4; i++) { retval = target_read_memory(target, flash_address(bank, sector, offset + i), bank->bus_width, 1, &data[i * bank->bus_width]); if (retval != ERROR_OK) return retval; } - } - else - { + } else { retval = target_read_memory(target, flash_address(bank, sector, offset), bank->bus_width, 4, data); if (retval != ERROR_OK) @@ -273,10 +264,11 @@ static int cfi_query_u32(struct flash_bank *bank, int sector, uint32_t offset, u if (bank->target->endianness == TARGET_LITTLE_ENDIAN) *val = data[0] | data[bank->bus_width] << 8 | - data[bank->bus_width * 2] << 16 | data[bank->bus_width * 3] << 24; + data[bank->bus_width * 2] << 16 | data[bank->bus_width * 3] << 24; else - *val = data[bank->bus_width - 1] | data[(2* bank->bus_width) - 1] << 8 | - data[(3 * bank->bus_width) - 1] << 16 | data[(4 * bank->bus_width) - 1] << 24; + *val = data[bank->bus_width - 1] | data[(2 * bank->bus_width) - 1] << 8 | + data[(3 * bank->bus_width) - 1] << 16 | + data[(4 * bank->bus_width) - 1] << 24; return ERROR_OK; } @@ -286,25 +278,21 @@ static int cfi_reset(struct flash_bank *bank) struct cfi_flash_bank *cfi_info = bank->driver_priv; int retval = ERROR_OK; - if ((retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0))) != ERROR_OK) - { + retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0)); + if (retval != ERROR_OK) return retval; - } - if ((retval = cfi_send_command(bank, 0xff, flash_address(bank, 0, 0x0))) != ERROR_OK) - { + retval = cfi_send_command(bank, 0xff, flash_address(bank, 0, 0x0)); + if (retval != ERROR_OK) return retval; - } if (cfi_info->manufacturer == 0x20 && - (cfi_info->device_id == 0x227E || cfi_info->device_id == 0x7E)) - { + (cfi_info->device_id == 0x227E || cfi_info->device_id == 0x7E)) { /* Numonix M29W128G is cmd 0xFF intolerant - causes internal undefined state * so we send an extra 0xF0 reset to fix the bug */ - if ((retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x00))) != ERROR_OK) - { + retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x00)); + if (retval != ERROR_OK) return retval; - } } return retval; @@ -321,10 +309,8 @@ static int cfi_intel_wait_status_busy(struct flash_bank *bank, int timeout, uint int retval = ERROR_OK; - for (;;) - { - if (timeout-- < 0) - { + for (;; ) { + if (timeout-- < 0) { LOG_ERROR("timeout while waiting for WSM to become ready"); return ERROR_FAIL; } @@ -344,8 +330,7 @@ static int cfi_intel_wait_status_busy(struct flash_bank *bank, int timeout, uint LOG_DEBUG("status: 0x%x", status); - if (status != 0x80) - { + if (status != 0x80) { LOG_ERROR("status register: 0x%x", status); if (status & 0x2) LOG_ERROR("Block Lock-Bit Detected, Operation Abort"); @@ -395,15 +380,15 @@ static int cfi_spansion_wait_status_busy(struct flash_bank *bank, int timeout) return retval; if ((status ^ oldstatus) & 0x40) { LOG_ERROR("dq5 timeout, status: 0x%x", status); - return(ERROR_FLASH_OPERATION_FAILED); + return ERROR_FLASH_OPERATION_FAILED; } else { LOG_DEBUG("status: 0x%x", status); - return(ERROR_OK); + return ERROR_OK; } } - } else { /* no toggle: finished, OK */ + } else {/* no toggle: finished, OK */ LOG_DEBUG("status: 0x%x", status); - return(ERROR_OK); + return ERROR_OK; } oldstatus = status; @@ -412,7 +397,7 @@ static int cfi_spansion_wait_status_busy(struct flash_bank *bank, int timeout) LOG_ERROR("timeout, status: 0x%x", status); - return(ERROR_FLASH_BUSY); + return ERROR_FLASH_BUSY; } static int cfi_read_intel_pri_ext(struct flash_bank *bank) @@ -425,8 +410,7 @@ static int cfi_read_intel_pri_ext(struct flash_bank *bank) free(cfi_info->pri_ext); pri_ext = malloc(sizeof(struct cfi_intel_pri_ext)); - if (pri_ext == NULL) - { + if (pri_ext == NULL) { LOG_ERROR("Out of memory"); return ERROR_FAIL; } @@ -442,12 +426,10 @@ static int cfi_read_intel_pri_ext(struct flash_bank *bank) if (retval != ERROR_OK) return retval; - if ((pri_ext->pri[0] != 'P') || (pri_ext->pri[1] != 'R') || (pri_ext->pri[2] != 'I')) - { - if ((retval = cfi_reset(bank)) != ERROR_OK) - { + if ((pri_ext->pri[0] != 'P') || (pri_ext->pri[1] != 'R') || (pri_ext->pri[2] != 'I')) { + retval = cfi_reset(bank); + if (retval != ERROR_OK) return retval; - } LOG_ERROR("Could not read bank flash bank information"); return ERROR_FLASH_BANK_INVALID; } @@ -460,7 +442,7 @@ static int cfi_read_intel_pri_ext(struct flash_bank *bank) return retval; LOG_DEBUG("pri: '%c%c%c', version: %c.%c", pri_ext->pri[0], pri_ext->pri[1], - pri_ext->pri[2], pri_ext->major_version, pri_ext->minor_version); + pri_ext->pri[2], pri_ext->major_version, pri_ext->minor_version); retval = cfi_query_u32(bank, 0, cfi_info->pri_addr + 5, &pri_ext->feature_support); if (retval != ERROR_OK) @@ -473,10 +455,10 @@ static int cfi_read_intel_pri_ext(struct flash_bank *bank) return retval; LOG_DEBUG("feature_support: 0x%" PRIx32 ", suspend_cmd_support: " - "0x%x, blk_status_reg_mask: 0x%x", - pri_ext->feature_support, - pri_ext->suspend_cmd_support, - pri_ext->blk_status_reg_mask); + "0x%x, blk_status_reg_mask: 0x%x", + pri_ext->feature_support, + pri_ext->suspend_cmd_support, + pri_ext->blk_status_reg_mask); retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0xc, &pri_ext->vcc_optimal); if (retval != ERROR_OK) @@ -486,16 +468,15 @@ static int cfi_read_intel_pri_ext(struct flash_bank *bank) return retval; LOG_DEBUG("Vcc opt: %x.%x, Vpp opt: %u.%x", - (pri_ext->vcc_optimal & 0xf0) >> 4, pri_ext->vcc_optimal & 0x0f, - (pri_ext->vpp_optimal & 0xf0) >> 4, pri_ext->vpp_optimal & 0x0f); + (pri_ext->vcc_optimal & 0xf0) >> 4, pri_ext->vcc_optimal & 0x0f, + (pri_ext->vpp_optimal & 0xf0) >> 4, pri_ext->vpp_optimal & 0x0f); retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0xe, &pri_ext->num_protection_fields); if (retval != ERROR_OK) return retval; - if (pri_ext->num_protection_fields != 1) - { + if (pri_ext->num_protection_fields != 1) { LOG_WARNING("expected one protection register field, but found %i", - pri_ext->num_protection_fields); + pri_ext->num_protection_fields); } retval = cfi_query_u16(bank, 0, cfi_info->pri_addr + 0xf, &pri_ext->prot_reg_addr); @@ -509,9 +490,9 @@ static int cfi_read_intel_pri_ext(struct flash_bank *bank) return retval; LOG_DEBUG("protection_fields: %i, prot_reg_addr: 0x%x, " - "factory pre-programmed: %i, user programmable: %i", - pri_ext->num_protection_fields, pri_ext->prot_reg_addr, - 1 << pri_ext->fact_prot_reg_size, 1 << pri_ext->user_prot_reg_size); + "factory pre-programmed: %i, user programmable: %i", + pri_ext->num_protection_fields, pri_ext->prot_reg_addr, + 1 << pri_ext->fact_prot_reg_size, 1 << pri_ext->user_prot_reg_size); return ERROR_OK; } @@ -526,8 +507,7 @@ static int cfi_read_spansion_pri_ext(struct flash_bank *bank) free(cfi_info->pri_ext); pri_ext = malloc(sizeof(struct cfi_spansion_pri_ext)); - if (pri_ext == NULL) - { + if (pri_ext == NULL) { LOG_ERROR("Out of memory"); return ERROR_FAIL; } @@ -543,12 +523,10 @@ static int cfi_read_spansion_pri_ext(struct flash_bank *bank) if (retval != ERROR_OK) return retval; - if ((pri_ext->pri[0] != 'P') || (pri_ext->pri[1] != 'R') || (pri_ext->pri[2] != 'I')) - { - if ((retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0))) != ERROR_OK) - { + if ((pri_ext->pri[0] != 'P') || (pri_ext->pri[1] != 'R') || (pri_ext->pri[2] != 'I')) { + retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0)); + if (retval != ERROR_OK) return retval; - } LOG_ERROR("Could not read spansion bank information"); return ERROR_FLASH_BANK_INVALID; } @@ -561,7 +539,7 @@ static int cfi_read_spansion_pri_ext(struct flash_bank *bank) return retval; LOG_DEBUG("pri: '%c%c%c', version: %c.%c", pri_ext->pri[0], pri_ext->pri[1], - pri_ext->pri[2], pri_ext->major_version, pri_ext->minor_version); + pri_ext->pri[2], pri_ext->major_version, pri_ext->minor_version); retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 5, &pri_ext->SiliconRevision); if (retval != ERROR_OK) @@ -598,18 +576,18 @@ static int cfi_read_spansion_pri_ext(struct flash_bank *bank) return retval; LOG_DEBUG("Silicon Revision: 0x%x, Erase Suspend: 0x%x, Block protect: 0x%x", - pri_ext->SiliconRevision, pri_ext->EraseSuspend, pri_ext->BlkProt); + pri_ext->SiliconRevision, pri_ext->EraseSuspend, pri_ext->BlkProt); LOG_DEBUG("Temporary Unprotect: 0x%x, Block Protect Scheme: 0x%x, " - "Simultaneous Ops: 0x%x", pri_ext->TmpBlkUnprotect, - pri_ext->BlkProtUnprot, pri_ext->SimultaneousOps); + "Simultaneous Ops: 0x%x", pri_ext->TmpBlkUnprotect, + pri_ext->BlkProtUnprot, pri_ext->SimultaneousOps); LOG_DEBUG("Burst Mode: 0x%x, Page Mode: 0x%x, ", pri_ext->BurstMode, pri_ext->PageMode); LOG_DEBUG("Vpp min: %u.%x, Vpp max: %u.%x", - (pri_ext->VppMin & 0xf0) >> 4, pri_ext->VppMin & 0x0f, - (pri_ext->VppMax & 0xf0) >> 4, pri_ext->VppMax & 0x0f); + (pri_ext->VppMin & 0xf0) >> 4, pri_ext->VppMin & 0x0f, + (pri_ext->VppMax & 0xf0) >> 4, pri_ext->VppMax & 0x0f); LOG_DEBUG("WP# protection 0x%x", pri_ext->TopBottom); @@ -632,8 +610,7 @@ static int cfi_read_atmel_pri_ext(struct flash_bank *bank) free(cfi_info->pri_ext); pri_ext = malloc(sizeof(struct cfi_spansion_pri_ext)); - if (pri_ext == NULL) - { + if (pri_ext == NULL) { LOG_ERROR("Out of memory"); return ERROR_FAIL; } @@ -658,12 +635,10 @@ static int cfi_read_atmel_pri_ext(struct flash_bank *bank) return retval; if ((atmel_pri_ext.pri[0] != 'P') || (atmel_pri_ext.pri[1] != 'R') - || (atmel_pri_ext.pri[2] != 'I')) - { - if ((retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0))) != ERROR_OK) - { + || (atmel_pri_ext.pri[2] != 'I')) { + retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0)); + if (retval != ERROR_OK) return retval; - } LOG_ERROR("Could not read atmel bank information"); return ERROR_FLASH_BANK_INVALID; } @@ -680,8 +655,8 @@ static int cfi_read_atmel_pri_ext(struct flash_bank *bank) return retval; LOG_DEBUG("pri: '%c%c%c', version: %c.%c", atmel_pri_ext.pri[0], - atmel_pri_ext.pri[1], atmel_pri_ext.pri[2], - atmel_pri_ext.major_version, atmel_pri_ext.minor_version); + atmel_pri_ext.pri[1], atmel_pri_ext.pri[2], + atmel_pri_ext.major_version, atmel_pri_ext.minor_version); pri_ext->major_version = atmel_pri_ext.major_version; pri_ext->minor_version = atmel_pri_ext.minor_version; @@ -699,16 +674,19 @@ static int cfi_read_atmel_pri_ext(struct flash_bank *bank) if (retval != ERROR_OK) return retval; - LOG_DEBUG("features: 0x%2.2x, bottom_boot: 0x%2.2x, burst_mode: 0x%2.2x, page_mode: 0x%2.2x", - atmel_pri_ext.features, atmel_pri_ext.bottom_boot, - atmel_pri_ext.burst_mode, atmel_pri_ext.page_mode); + LOG_DEBUG( + "features: 0x%2.2x, bottom_boot: 0x%2.2x, burst_mode: 0x%2.2x, page_mode: 0x%2.2x", + atmel_pri_ext.features, + atmel_pri_ext.bottom_boot, + atmel_pri_ext.burst_mode, + atmel_pri_ext.page_mode); if (atmel_pri_ext.features & 0x02) pri_ext->EraseSuspend = 2; /* some chips got it backwards... */ if (cfi_info->device_id == AT49BV6416 || - cfi_info->device_id == AT49BV6416T) { + cfi_info->device_id == AT49BV6416T) { if (atmel_pri_ext.bottom_boot) pri_ext->TopBottom = 3; else @@ -731,13 +709,9 @@ static int cfi_read_0002_pri_ext(struct flash_bank *bank) struct cfi_flash_bank *cfi_info = bank->driver_priv; if (cfi_info->manufacturer == CFI_MFR_ATMEL) - { return cfi_read_atmel_pri_ext(bank); - } else - { return cfi_read_spansion_pri_ext(bank); - } } static int cfi_spansion_info(struct flash_bank *bank, char *buf, int buf_size) @@ -769,8 +743,8 @@ static int cfi_spansion_info(struct flash_bank *bank, char *buf, int buf_size) buf_size -= printed; snprintf(buf, buf_size, "VppMin: %u.%x, VppMax: %u.%x\n", - (pri_ext->VppMin & 0xf0) >> 4, pri_ext->VppMin & 0x0f, - (pri_ext->VppMax & 0xf0) >> 4, pri_ext->VppMax & 0x0f); + (pri_ext->VppMin & 0xf0) >> 4, pri_ext->VppMin & 0x0f, + (pri_ext->VppMax & 0xf0) >> 4, pri_ext->VppMax & 0x0f); return ERROR_OK; } @@ -785,14 +759,24 @@ static int cfi_intel_info(struct flash_bank *bank, char *buf, int buf_size) buf += printed; buf_size -= printed; - printed = snprintf(buf, buf_size, "pri: '%c%c%c', version: %c.%c\n", pri_ext->pri[0], - pri_ext->pri[1], pri_ext->pri[2], pri_ext->major_version, pri_ext->minor_version); + printed = snprintf(buf, + buf_size, + "pri: '%c%c%c', version: %c.%c\n", + pri_ext->pri[0], + pri_ext->pri[1], + pri_ext->pri[2], + pri_ext->major_version, + pri_ext->minor_version); buf += printed; buf_size -= printed; - printed = snprintf(buf, buf_size, "feature_support: 0x%" PRIx32 ", " + printed = snprintf(buf, + buf_size, + "feature_support: 0x%" PRIx32 ", " "suspend_cmd_support: 0x%x, blk_status_reg_mask: 0x%x\n", - pri_ext->feature_support, pri_ext->suspend_cmd_support, pri_ext->blk_status_reg_mask); + pri_ext->feature_support, + pri_ext->suspend_cmd_support, + pri_ext->blk_status_reg_mask); buf += printed; buf_size -= printed; @@ -803,9 +787,9 @@ static int cfi_intel_info(struct flash_bank *bank, char *buf, int buf_size) buf_size -= printed; snprintf(buf, buf_size, "protection_fields: %i, prot_reg_addr: 0x%x, " - "factory pre-programmed: %i, user programmable: %i\n", - pri_ext->num_protection_fields, pri_ext->prot_reg_addr, - 1 << pri_ext->fact_prot_reg_size, 1 << pri_ext->user_prot_reg_size); + "factory pre-programmed: %i, user programmable: %i\n", + pri_ext->num_protection_fields, pri_ext->prot_reg_addr, + 1 << pri_ext->fact_prot_reg_size, 1 << pri_ext->user_prot_reg_size); return ERROR_OK; } @@ -817,9 +801,7 @@ FLASH_BANK_COMMAND_HANDLER(cfi_flash_bank_command) struct cfi_flash_bank *cfi_info; if (CMD_ARGC < 6) - { return ERROR_COMMAND_SYNTAX_ERROR; - } /* both widths must: * - not exceed max value; @@ -832,8 +814,7 @@ FLASH_BANK_COMMAND_HANDLER(cfi_flash_bank_command) || (bank->bus_width == 0) || (bank->chip_width & (bank->chip_width - 1)) || (bank->bus_width & (bank->bus_width - 1)) - || (bank->chip_width > bank->bus_width)) - { + || (bank->chip_width > bank->bus_width)) { LOG_ERROR("chip and bus width have to specified in bytes"); return ERROR_FLASH_BANK_INVALID; } @@ -850,16 +831,11 @@ FLASH_BANK_COMMAND_HANDLER(cfi_flash_bank_command) cfi_info->jedec_probe = 0; cfi_info->not_cfi = 0; - for (unsigned i = 6; i < CMD_ARGC; i++) - { + for (unsigned i = 6; i < CMD_ARGC; i++) { if (strcmp(CMD_ARGV[i], "x16_as_x8") == 0) - { cfi_info->x16_as_x8 = 1; - } else if (strcmp(CMD_ARGV[i], "jedec_probe") == 0) - { cfi_info->jedec_probe = 1; - } } cfi_info->write_algorithm = NULL; @@ -878,17 +854,14 @@ static int cfi_intel_erase(struct flash_bank *bank, int first, int last) cfi_intel_clear_status_register(bank); - for (i = first; i <= last; i++) - { - if ((retval = cfi_send_command(bank, 0x20, flash_address(bank, i, 0x0))) != ERROR_OK) - { + for (i = first; i <= last; i++) { + retval = cfi_send_command(bank, 0x20, flash_address(bank, i, 0x0)); + if (retval != ERROR_OK) return retval; - } - if ((retval = cfi_send_command(bank, 0xd0, flash_address(bank, i, 0x0))) != ERROR_OK) - { + retval = cfi_send_command(bank, 0xd0, flash_address(bank, i, 0x0)); + if (retval != ERROR_OK) return retval; - } uint8_t status; retval = cfi_intel_wait_status_busy(bank, cfi_info->block_erase_timeout, &status); @@ -897,14 +870,14 @@ static int cfi_intel_erase(struct flash_bank *bank, int first, int last) if (status == 0x80) bank->sectors[i].is_erased = 1; - else - { - if ((retval = cfi_send_command(bank, 0xff, flash_address(bank, 0, 0x0))) != ERROR_OK) - { + else { + retval = cfi_send_command(bank, 0xff, flash_address(bank, 0, 0x0)); + if (retval != ERROR_OK) return retval; - } - LOG_ERROR("couldn't erase block %i of flash bank at base 0x%" PRIx32 , i, bank->base); + LOG_ERROR("couldn't erase block %i of flash bank at base 0x%" PRIx32, + i, + bank->base); return ERROR_FLASH_OPERATION_FAILED; } } @@ -919,85 +892,63 @@ static int cfi_spansion_erase(struct flash_bank *bank, int first, int last) struct cfi_spansion_pri_ext *pri_ext = cfi_info->pri_ext; int i; - for (i = first; i <= last; i++) - { - if ((retval = cfi_send_command(bank, 0xaa, - flash_address(bank, 0, pri_ext->_unlock1))) != ERROR_OK) - { + for (i = first; i <= last; i++) { + retval = cfi_send_command(bank, 0xaa, flash_address(bank, 0, pri_ext->_unlock1)); + if (retval != ERROR_OK) return retval; - } - if ((retval = cfi_send_command(bank, 0x55, - flash_address(bank, 0, pri_ext->_unlock2))) != ERROR_OK) - { + retval = cfi_send_command(bank, 0x55, flash_address(bank, 0, pri_ext->_unlock2)); + if (retval != ERROR_OK) return retval; - } - if ((retval = cfi_send_command(bank, 0x80, - flash_address(bank, 0, pri_ext->_unlock1))) != ERROR_OK) - { + retval = cfi_send_command(bank, 0x80, flash_address(bank, 0, pri_ext->_unlock1)); + if (retval != ERROR_OK) return retval; - } - if ((retval = cfi_send_command(bank, 0xaa, - flash_address(bank, 0, pri_ext->_unlock1))) != ERROR_OK) - { + retval = cfi_send_command(bank, 0xaa, flash_address(bank, 0, pri_ext->_unlock1)); + if (retval != ERROR_OK) return retval; - } - if ((retval = cfi_send_command(bank, 0x55, - flash_address(bank, 0, pri_ext->_unlock2))) != ERROR_OK) - { + retval = cfi_send_command(bank, 0x55, flash_address(bank, 0, pri_ext->_unlock2)); + if (retval != ERROR_OK) return retval; - } - if ((retval = cfi_send_command(bank, 0x30, - flash_address(bank, i, 0x0))) != ERROR_OK) - { + retval = cfi_send_command(bank, 0x30, flash_address(bank, i, 0x0)); + if (retval != ERROR_OK) return retval; - } if (cfi_spansion_wait_status_busy(bank, cfi_info->block_erase_timeout) == ERROR_OK) - { bank->sectors[i].is_erased = 1; - } - else - { - if ((retval = cfi_send_command(bank, 0xf0, - flash_address(bank, 0, 0x0))) != ERROR_OK) - { + else { + retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0)); + if (retval != ERROR_OK) return retval; - } LOG_ERROR("couldn't erase block %i of flash bank at base 0x%" - PRIx32, i, bank->base); + PRIx32, i, bank->base); return ERROR_FLASH_OPERATION_FAILED; } } - return cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0)); + return cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0)); } static int cfi_erase(struct flash_bank *bank, int first, int last) { struct cfi_flash_bank *cfi_info = bank->driver_priv; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } if ((first < 0) || (last < first) || (last >= bank->num_sectors)) - { return ERROR_FLASH_SECTOR_INVALID; - } if (cfi_info->qry[0] != 'Q') return ERROR_FLASH_BANK_NOT_PROBED; - switch (cfi_info->pri_id) - { + switch (cfi_info->pri_id) { case 1: case 3: return cfi_intel_erase(bank, first, last); @@ -1024,67 +975,54 @@ static int cfi_intel_protect(struct flash_bank *bank, int set, int first, int la /* if the device supports neither legacy lock/unlock (bit 3) nor * instant individual block locking (bit 5). */ - if (!(pri_ext->feature_support & 0x28)) - { + if (!(pri_ext->feature_support & 0x28)) { LOG_ERROR("lock/unlock not supported on flash"); return ERROR_FLASH_OPERATION_FAILED; } cfi_intel_clear_status_register(bank); - for (i = first; i <= last; i++) - { - if ((retval = cfi_send_command(bank, 0x60, flash_address(bank, i, 0x0))) != ERROR_OK) - { + for (i = first; i <= last; i++) { + retval = cfi_send_command(bank, 0x60, flash_address(bank, i, 0x0)); + if (retval != ERROR_OK) return retval; - } - if (set) - { - if ((retval = cfi_send_command(bank, 0x01, flash_address(bank, i, 0x0))) != ERROR_OK) - { + if (set) { + retval = cfi_send_command(bank, 0x01, flash_address(bank, i, 0x0)); + if (retval != ERROR_OK) return retval; - } bank->sectors[i].is_protected = 1; - } - else - { - if ((retval = cfi_send_command(bank, 0xd0, flash_address(bank, i, 0x0))) != ERROR_OK) - { + } else { + retval = cfi_send_command(bank, 0xd0, flash_address(bank, i, 0x0)); + if (retval != ERROR_OK) return retval; - } bank->sectors[i].is_protected = 0; } - /* instant individual block locking doesn't require reading of the status register */ - if (!(pri_ext->feature_support & 0x20)) - { + /* instant individual block locking doesn't require reading of the status register + **/ + if (!(pri_ext->feature_support & 0x20)) { /* Clear lock bits operation may take up to 1.4s */ uint8_t status; retval = cfi_intel_wait_status_busy(bank, 1400, &status); if (retval != ERROR_OK) return retval; - } - else - { + } else { uint8_t block_status; /* read block lock bit, to verify status */ - if ((retval = cfi_send_command(bank, 0x90, flash_address(bank, 0, 0x55))) != ERROR_OK) - { + retval = cfi_send_command(bank, 0x90, flash_address(bank, 0, 0x55)); + if (retval != ERROR_OK) return retval; - } retval = cfi_get_u8(bank, i, 0x2, &block_status); if (retval != ERROR_OK) return retval; - if ((block_status & 0x1) != set) - { - LOG_ERROR("couldn't change block lock status (set = %i, block_status = 0x%2.2x)", - set, block_status); - if ((retval = cfi_send_command(bank, 0x70, - flash_address(bank, 0, 0x55))) != ERROR_OK) - { + if ((block_status & 0x1) != set) { + LOG_ERROR( + "couldn't change block lock status (set = %i, block_status = 0x%2.2x)", + set, block_status); + retval = cfi_send_command(bank, 0x70, flash_address(bank, 0, 0x55)); + if (retval != ERROR_OK) return retval; - } uint8_t status; retval = cfi_intel_wait_status_busy(bank, 10, &status); if (retval != ERROR_OK) @@ -1092,8 +1030,7 @@ static int cfi_intel_protect(struct flash_bank *bank, int set, int first, int la if (retry > 10) return ERROR_FLASH_OPERATION_FAILED; - else - { + else { i--; retry++; } @@ -1104,8 +1041,7 @@ static int cfi_intel_protect(struct flash_bank *bank, int set, int first, int la /* if the device doesn't support individual block lock bits set/clear, * all blocks have been unlocked in parallel, so we set those that should be protected */ - if ((!set) && (!(pri_ext->feature_support & 0x20))) - { + if ((!set) && (!(pri_ext->feature_support & 0x20))) { /* FIX!!! this code path is broken!!! * * The correct approach is: @@ -1117,23 +1053,17 @@ static int cfi_intel_protect(struct flash_bank *bank, int set, int first, int la * 3. re-protect what should be protected. * */ - for (i = 0; i < bank->num_sectors; i++) - { - if (bank->sectors[i].is_protected == 1) - { + for (i = 0; i < bank->num_sectors; i++) { + if (bank->sectors[i].is_protected == 1) { cfi_intel_clear_status_register(bank); - if ((retval = cfi_send_command(bank, 0x60, - flash_address(bank, i, 0x0))) != ERROR_OK) - { + retval = cfi_send_command(bank, 0x60, flash_address(bank, i, 0x0)); + if (retval != ERROR_OK) return retval; - } - if ((retval = cfi_send_command(bank, 0x01, - flash_address(bank, i, 0x0))) != ERROR_OK) - { + retval = cfi_send_command(bank, 0x01, flash_address(bank, i, 0x0)); + if (retval != ERROR_OK) return retval; - } uint8_t status; retval = cfi_intel_wait_status_busy(bank, 100, &status); @@ -1150,14 +1080,12 @@ static int cfi_protect(struct flash_bank *bank, int set, int first, int last) { struct cfi_flash_bank *cfi_info = bank->driver_priv; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - if ((first < 0) || (last < first) || (last >= bank->num_sectors)) - { + if ((first < 0) || (last < first) || (last >= bank->num_sectors)) { LOG_ERROR("Invalid sector range"); return ERROR_FLASH_SECTOR_INVALID; } @@ -1165,8 +1093,7 @@ static int cfi_protect(struct flash_bank *bank, int set, int first, int last) if (cfi_info->qry[0] != 'Q') return ERROR_FLASH_BANK_NOT_PROBED; - switch (cfi_info->pri_id) - { + switch (cfi_info->pri_id) { case 1: case 3: return cfi_intel_protect(bank, set, first, last); @@ -1177,14 +1104,13 @@ static int cfi_protect(struct flash_bank *bank, int set, int first, int last) } } -/* Convert code image to target endian */ -/* FIXME create general block conversion fcts in target.c?) */ +/* Convert code image to target endian + * FIXME create general block conversion fcts in target.c?) */ static void cfi_fix_code_endian(struct target *target, uint8_t *dest, - const uint32_t *src, uint32_t count) + const uint32_t *src, uint32_t count) { uint32_t i; - for (i = 0; i< count; i++) - { + for (i = 0; i < count; i++) { target_buffer_set_u32(target, dest, *src); dest += 4; src++; @@ -1197,25 +1123,25 @@ static uint32_t cfi_command_val(struct flash_bank *bank, uint8_t cmd) uint8_t buf[CFI_MAX_BUS_WIDTH]; cfi_command(bank, cmd, buf); - switch (bank->bus_width) - { - case 1 : - return buf[0]; - break; - case 2 : - return target_buffer_get_u16(target, buf); - break; - case 4 : - return target_buffer_get_u32(target, buf); - break; - default : - LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank->bus_width); - return 0; + switch (bank->bus_width) { + case 1: + return buf[0]; + break; + case 2: + return target_buffer_get_u16(target, buf); + break; + case 4: + return target_buffer_get_u32(target, buf); + break; + default: + LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes", + bank->bus_width); + return 0; } } static int cfi_intel_write_block(struct flash_bank *bank, uint8_t *buffer, - uint32_t address, uint32_t count) + uint32_t address, uint32_t count) { struct cfi_flash_bank *cfi_info = bank->driver_priv; struct target *target = bank->target; @@ -1237,65 +1163,65 @@ static int cfi_intel_write_block(struct flash_bank *bank, uint8_t *buffer, /* see contib/loaders/flash/armv4_5_cfi_intel_32.s for src */ static const uint32_t word_32_code[] = { - 0xe4904004, /* loop: ldr r4, [r0], #4 */ - 0xe5813000, /* str r3, [r1] */ - 0xe5814000, /* str r4, [r1] */ - 0xe5914000, /* busy: ldr r4, [r1] */ - 0xe0047005, /* and r7, r4, r5 */ - 0xe1570005, /* cmp r7, r5 */ - 0x1afffffb, /* bne busy */ - 0xe1140006, /* tst r4, r6 */ - 0x1a000003, /* bne done */ - 0xe2522001, /* subs r2, r2, #1 */ - 0x0a000001, /* beq done */ - 0xe2811004, /* add r1, r1 #4 */ - 0xeafffff2, /* b loop */ - 0xeafffffe /* done: b -2 */ + 0xe4904004, /* loop: ldr r4, [r0], #4 */ + 0xe5813000, /* str r3, [r1] */ + 0xe5814000, /* str r4, [r1] */ + 0xe5914000, /* busy: ldr r4, [r1] */ + 0xe0047005, /* and r7, r4, r5 */ + 0xe1570005, /* cmp r7, r5 */ + 0x1afffffb, /* bne busy */ + 0xe1140006, /* tst r4, r6 */ + 0x1a000003, /* bne done */ + 0xe2522001, /* subs r2, r2, #1 */ + 0x0a000001, /* beq done */ + 0xe2811004, /* add r1, r1 #4 */ + 0xeafffff2, /* b loop */ + 0xeafffffe /* done: b -2 */ }; /* see contib/loaders/flash/armv4_5_cfi_intel_16.s for src */ static const uint32_t word_16_code[] = { - 0xe0d040b2, /* loop: ldrh r4, [r0], #2 */ - 0xe1c130b0, /* strh r3, [r1] */ - 0xe1c140b0, /* strh r4, [r1] */ - 0xe1d140b0, /* busy ldrh r4, [r1] */ - 0xe0047005, /* and r7, r4, r5 */ - 0xe1570005, /* cmp r7, r5 */ - 0x1afffffb, /* bne busy */ - 0xe1140006, /* tst r4, r6 */ - 0x1a000003, /* bne done */ - 0xe2522001, /* subs r2, r2, #1 */ - 0x0a000001, /* beq done */ - 0xe2811002, /* add r1, r1 #2 */ - 0xeafffff2, /* b loop */ - 0xeafffffe /* done: b -2 */ + 0xe0d040b2, /* loop: ldrh r4, [r0], #2 */ + 0xe1c130b0, /* strh r3, [r1] */ + 0xe1c140b0, /* strh r4, [r1] */ + 0xe1d140b0, /* busy ldrh r4, [r1] */ + 0xe0047005, /* and r7, r4, r5 */ + 0xe1570005, /* cmp r7, r5 */ + 0x1afffffb, /* bne busy */ + 0xe1140006, /* tst r4, r6 */ + 0x1a000003, /* bne done */ + 0xe2522001, /* subs r2, r2, #1 */ + 0x0a000001, /* beq done */ + 0xe2811002, /* add r1, r1 #2 */ + 0xeafffff2, /* b loop */ + 0xeafffffe /* done: b -2 */ }; /* see contib/loaders/flash/armv4_5_cfi_intel_8.s for src */ static const uint32_t word_8_code[] = { - 0xe4d04001, /* loop: ldrb r4, [r0], #1 */ - 0xe5c13000, /* strb r3, [r1] */ - 0xe5c14000, /* strb r4, [r1] */ - 0xe5d14000, /* busy ldrb r4, [r1] */ - 0xe0047005, /* and r7, r4, r5 */ - 0xe1570005, /* cmp r7, r5 */ - 0x1afffffb, /* bne busy */ - 0xe1140006, /* tst r4, r6 */ - 0x1a000003, /* bne done */ - 0xe2522001, /* subs r2, r2, #1 */ - 0x0a000001, /* beq done */ - 0xe2811001, /* add r1, r1 #1 */ - 0xeafffff2, /* b loop */ - 0xeafffffe /* done: b -2 */ + 0xe4d04001, /* loop: ldrb r4, [r0], #1 */ + 0xe5c13000, /* strb r3, [r1] */ + 0xe5c14000, /* strb r4, [r1] */ + 0xe5d14000, /* busy ldrb r4, [r1] */ + 0xe0047005, /* and r7, r4, r5 */ + 0xe1570005, /* cmp r7, r5 */ + 0x1afffffb, /* bne busy */ + 0xe1140006, /* tst r4, r6 */ + 0x1a000003, /* bne done */ + 0xe2522001, /* subs r2, r2, #1 */ + 0x0a000001, /* beq done */ + 0xe2811001, /* add r1, r1 #1 */ + 0xeafffff2, /* b loop */ + 0xeafffffe /* done: b -2 */ }; uint8_t target_code[4*CFI_MAX_INTEL_CODESIZE]; const uint32_t *target_code_src; uint32_t target_code_size; int retval = ERROR_OK; - /* todo: if ( (!is_armv7m(target_to_armv7m(target)) && (!is_arm(target_to_arm(target)) ) */ - if (strncmp(target_type_name(target),"mips_m4k",8) == 0) - { + /* todo: if ( (!is_armv7m(target_to_armv7m(target)) && (!is_arm(target_to_arm(target)) ) + **/ + if (strncmp(target_type_name(target), "mips_m4k", 8) == 0) { LOG_ERROR("Your target has no flash block write support yet."); return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; } @@ -1306,57 +1232,56 @@ static int cfi_intel_write_block(struct flash_bank *bank, uint8_t *buffer, armv4_5_info.core_mode = ARM_MODE_SVC; armv4_5_info.core_state = ARM_STATE_ARM; - /* If we are setting up the write_algorith, we need target_code_src */ - /* if not we only need target_code_size. */ + /* If we are setting up the write_algorith, we need target_code_src + * if not we only need target_code_size. */ - /* However, we don't want to create multiple code paths, so we */ - /* do the unecessary evaluation of target_code_src, which the */ - /* compiler will probably nicely optimize away if not needed */ + /* However, we don't want to create multiple code paths, so we + * do the unecessary evaluation of target_code_src, which the + * compiler will probably nicely optimize away if not needed */ /* prepare algorithm code for target endian */ - switch (bank->bus_width) - { - case 1 : - target_code_src = word_8_code; - target_code_size = sizeof(word_8_code); - break; - case 2 : - target_code_src = word_16_code; - target_code_size = sizeof(word_16_code); - break; - case 4 : - target_code_src = word_32_code; - target_code_size = sizeof(word_32_code); - break; - default: - LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank->bus_width); - return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; + switch (bank->bus_width) { + case 1: + target_code_src = word_8_code; + target_code_size = sizeof(word_8_code); + break; + case 2: + target_code_src = word_16_code; + target_code_size = sizeof(word_16_code); + break; + case 4: + target_code_src = word_32_code; + target_code_size = sizeof(word_32_code); + break; + default: + LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes", + bank->bus_width); + return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; } /* flash write code */ - if (!cfi_info->write_algorithm) - { - if (target_code_size > sizeof(target_code)) - { + if (!cfi_info->write_algorithm) { + if (target_code_size > sizeof(target_code)) { LOG_WARNING("Internal error - target code buffer to small. " - "Increase CFI_MAX_INTEL_CODESIZE and recompile."); + "Increase CFI_MAX_INTEL_CODESIZE and recompile."); return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; } cfi_fix_code_endian(target, target_code, target_code_src, target_code_size / 4); /* Get memory for block write handler */ - retval = target_alloc_working_area(target, target_code_size, &cfi_info->write_algorithm); - if (retval != ERROR_OK) - { + retval = target_alloc_working_area(target, + target_code_size, + &cfi_info->write_algorithm); + if (retval != ERROR_OK) { LOG_WARNING("No working area available, can't do block memory writes"); return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; - }; + } + ; /* write algorithm code to working area */ retval = target_write_buffer(target, cfi_info->write_algorithm->address, target_code_size, target_code); - if (retval != ERROR_OK) - { + if (retval != ERROR_OK) { LOG_ERROR("Unable to write block write code to target"); goto cleanup; } @@ -1365,16 +1290,16 @@ static int cfi_intel_write_block(struct flash_bank *bank, uint8_t *buffer, /* Get a workspace buffer for the data to flash starting with 32k size. Half size until buffer would be smaller 256 Bytem then fail back */ /* FIXME Why 256 bytes, why not 32 bytes (smallest flash write page */ - while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) - { + while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) { buffer_size /= 2; - if (buffer_size <= 256) - { - LOG_WARNING("no large enough working area available, can't do block memory writes"); + if (buffer_size <= 256) { + LOG_WARNING( + "no large enough working area available, can't do block memory writes"); retval = ERROR_TARGET_RESOURCE_NOT_AVAILABLE; goto cleanup; } - }; + } + ; /* setup algo registers */ init_reg_param(®_params[0], "r0", 32, PARAM_OUT); @@ -1391,19 +1316,16 @@ static int cfi_intel_write_block(struct flash_bank *bank, uint8_t *buffer, error_pattern_val = cfi_command_val(bank, 0x7e); LOG_DEBUG("Using target buffer at 0x%08" PRIx32 " and of size 0x%04" PRIx32, - source->address, buffer_size); + source->address, buffer_size); /* Programming main loop */ - while (count > 0) - { + while (count > 0) { uint32_t thisrun_count = (count > buffer_size) ? buffer_size : count; uint32_t wsm_error; - if ((retval = target_write_buffer(target, source->address, - thisrun_count, buffer)) != ERROR_OK) - { + retval = target_write_buffer(target, source->address, thisrun_count, buffer); + if (retval != ERROR_OK) goto cleanup; - } buf_set_u32(reg_params[0].value, 0, 32, source->address); buf_set_u32(reg_params[1].value, 0, 32, address); @@ -1413,20 +1335,22 @@ static int cfi_intel_write_block(struct flash_bank *bank, uint8_t *buffer, buf_set_u32(reg_params[5].value, 0, 32, busy_pattern_val); buf_set_u32(reg_params[6].value, 0, 32, error_pattern_val); - LOG_DEBUG("Write 0x%04" PRIx32 " bytes to flash at 0x%08" PRIx32 , thisrun_count, address); + LOG_DEBUG("Write 0x%04" PRIx32 " bytes to flash at 0x%08" PRIx32, + thisrun_count, address); /* Execute algorithm, assume breakpoint for last instruction */ retval = target_run_algorithm(target, 0, NULL, 7, reg_params, - cfi_info->write_algorithm->address, - cfi_info->write_algorithm->address + target_code_size - sizeof(uint32_t), - 10000, /* 10s should be enough for max. 32k of data */ - &armv4_5_info); + cfi_info->write_algorithm->address, + cfi_info->write_algorithm->address + target_code_size - + sizeof(uint32_t), + 10000, /* 10s should be enough for max. 32k of data */ + &armv4_5_info); /* On failure try a fall back to direct word writes */ - if (retval != ERROR_OK) - { + if (retval != ERROR_OK) { cfi_intel_clear_status_register(bank); - LOG_ERROR("Execution of flash algorythm failed. Can't fall back. Please report."); + LOG_ERROR( + "Execution of flash algorythm failed. Can't fall back. Please report."); retval = ERROR_FLASH_OPERATION_FAILED; /* retval = ERROR_TARGET_RESOURCE_NOT_AVAILABLE; */ /* FIXME To allow fall back or recovery, we must save the actual status @@ -1436,8 +1360,7 @@ static int cfi_intel_write_block(struct flash_bank *bank, uint8_t *buffer, /* Check return value from algo code */ wsm_error = buf_get_u32(reg_params[4].value, 0, 32) & error_pattern_val; - if (wsm_error) - { + if (wsm_error) { /* read status register (outputs debug inforation) */ uint8_t status; cfi_intel_wait_status_busy(bank, 100, &status); @@ -1458,8 +1381,7 @@ cleanup: if (source) target_free_working_area(target, source); - if (cfi_info->write_algorithm) - { + if (cfi_info->write_algorithm) { target_free_working_area(target, cfi_info->write_algorithm); cfi_info->write_algorithm = NULL; } @@ -1476,7 +1398,7 @@ cleanup: } static int cfi_spansion_write_block_mips(struct flash_bank *bank, uint8_t *buffer, - uint32_t address, uint32_t count) + uint32_t address, uint32_t count) { struct cfi_flash_bank *cfi_info = bank->driver_priv; struct cfi_spansion_pri_ext *pri_ext = cfi_info->pri_ext; @@ -1488,72 +1410,86 @@ static int cfi_spansion_write_block_mips(struct flash_bank *bank, uint8_t *buffe uint32_t status; int retval = ERROR_OK; - /* input parameters - */ - /* 4 A0 = source address */ - /* 5 A1 = destination address */ - /* 6 A2 = number of writes */ - /* 7 A3 = flash write command */ - /* 8 T0 = constant to mask DQ7 bits (also used for Dq5 with shift) */ - /* output parameters - */ - /* 9 T1 = 0x80 ok 0x00 bad */ - /* temp registers - */ - /* 10 T2 = value read from flash to test status */ - /* 11 T3 = holding register */ - /* unlock registers - */ - /* 12 T4 = unlock1_addr */ - /* 13 T5 = unlock1_cmd */ - /* 14 T6 = unlock2_addr */ - /* 15 T7 = unlock2_cmd */ + /* input parameters - + * 4 A0 = source address + * 5 A1 = destination address + * 6 A2 = number of writes + * 7 A3 = flash write command + * 8 T0 = constant to mask DQ7 bits (also used for Dq5 with shift) + * output parameters - + * 9 T1 = 0x80 ok 0x00 bad + * temp registers - + * 10 T2 = value read from flash to test status + * 11 T3 = holding register + * unlock registers - + * 12 T4 = unlock1_addr + * 13 T5 = unlock1_cmd + * 14 T6 = unlock2_addr + * 15 T7 = unlock2_cmd */ static const uint32_t mips_word_16_code[] = { - /* start: */ - MIPS32_LHU(9,0,4), /* lhu $t1, ($a0) ; out = &saddr */ - MIPS32_ADDI(4,4,2), /* addi $a0, $a0, 2 ; saddr += 2 */ - MIPS32_SH(13,0,12), /* sh $t5, ($t4) ; *fl_unl_addr1 = fl_unl_cmd1 */ - MIPS32_SH(15,0,14), /* sh $t7, ($t6) ; *fl_unl_addr2 = fl_unl_cmd2 */ - MIPS32_SH(7,0,12), /* sh $a3, ($t4) ; *fl_unl_addr1 = fl_write_cmd */ - MIPS32_SH(9,0,5), /* sh $t1, ($a1) ; *daddr = out */ + /* start: */ + MIPS32_LHU(9, 0, 4), /* lhu $t1, ($a0) ; out = &saddr */ + MIPS32_ADDI(4, 4, 2), /* addi $a0, $a0, 2 ; saddr += 2 */ + MIPS32_SH(13, 0, 12), /* sh $t5, ($t4) ; *fl_unl_addr1 = + *fl_unl_cmd1 */ + MIPS32_SH(15, 0, 14), /* sh $t7, ($t6) ; *fl_unl_addr2 = + *fl_unl_cmd2 */ + MIPS32_SH(7, 0, 12), /* sh $a3, ($t4) ; *fl_unl_addr1 = + *fl_write_cmd */ + MIPS32_SH(9, 0, 5), /* sh $t1, ($a1) ; *daddr = out */ MIPS32_NOP, /* nop */ - /* busy: */ - MIPS32_LHU(10,0,5), /* lhu $t2, ($a1) ; temp1 = *daddr */ - MIPS32_XOR(11,9,10), /* xor $t3, $a0, $t2 ; temp2 = out ^ temp1; */ - MIPS32_AND(11,8,11), /* and $t3, $t0, $t3 ; temp2 = temp2 & DQ7mask */ - MIPS32_BNE(11,8, 13), /* bne $t3, $t0, cont ; if (temp2 != DQ7mask) goto cont */ + /* busy: */ + MIPS32_LHU(10, 0, 5), /* lhu $t2, ($a1) ; temp1 = *daddr */ + MIPS32_XOR(11, 9, 10), /* xor $t3, $a0, $t2 ; temp2 = out ^ + *temp1; */ + MIPS32_AND(11, 8, 11), /* and $t3, $t0, $t3 ; temp2 = temp2 & + *DQ7mask */ + MIPS32_BNE(11, 8, 13), /* bne $t3, $t0, cont ; if (temp2 != + *DQ7mask) goto cont */ MIPS32_NOP, /* nop */ - MIPS32_SRL(10,8,2), /* srl $t2,$t0,2 ; temp1 = DQ7mask >> 2 */ - MIPS32_AND(11,10,11), /* and $t3, $t2, $t3 ; temp2 = temp2 & temp1 */ - MIPS32_BNE(11,10, NEG16(8)), /* bne $t3, $t2, busy ; if (temp2 != temp1) goto busy */ + MIPS32_SRL(10, 8, 2), /* srl $t2,$t0,2 ; temp1 = DQ7mask >> + *2 */ + MIPS32_AND(11, 10, 11), /* and $t3, $t2, $t3 ; temp2 = temp2 & + *temp1 */ + MIPS32_BNE(11, 10, NEG16(8)), /* bne $t3, $t2, busy ; if (temp2 != + *temp1) goto busy */ MIPS32_NOP, /* nop */ - MIPS32_LHU(10,0,5), /* lhu $t2, ($a1) ; temp1 = *daddr */ - MIPS32_XOR(11,9,10), /* xor $t3, $a0, $t2 ; temp2 = out ^ temp1; */ - MIPS32_AND(11,8,11), /* and $t3, $t0, $t3 ; temp2 = temp2 & DQ7mask */ - MIPS32_BNE(11,8, 4), /* bne $t3, $t0, cont ; if (temp2 != DQ7mask) goto cont */ + MIPS32_LHU(10, 0, 5), /* lhu $t2, ($a1) ; temp1 = *daddr */ + MIPS32_XOR(11, 9, 10), /* xor $t3, $a0, $t2 ; temp2 = out ^ + *temp1; */ + MIPS32_AND(11, 8, 11), /* and $t3, $t0, $t3 ; temp2 = temp2 & + *DQ7mask */ + MIPS32_BNE(11, 8, 4), /* bne $t3, $t0, cont ; if (temp2 != + *DQ7mask) goto cont */ MIPS32_NOP, /* nop */ - MIPS32_XOR(9,9,9), /* xor $t1, $t1, $t1 ; out = 0 */ - MIPS32_BEQ(9,0, 11), /* beq $t1, $zero, done ; if (out == 0) goto done */ + MIPS32_XOR(9, 9, 9), /* xor $t1, $t1, $t1 ; out = 0 */ + MIPS32_BEQ(9, 0, 11), /* beq $t1, $zero, done ; if (out == 0) goto + *done */ MIPS32_NOP, /* nop */ - /* cont: */ - MIPS32_ADDI(6,6,NEG16(1)), /* addi, $a2, $a2, -1 ; numwrites-- */ - MIPS32_BNE(6,0, 5), /* bne $a2, $zero, cont2 ; if (numwrite != 0) goto cont2 */ + /* cont: */ + MIPS32_ADDI(6, 6, NEG16(1)), /* addi, $a2, $a2, -1 ; numwrites-- */ + MIPS32_BNE(6, 0, 5), /* bne $a2, $zero, cont2 ; if (numwrite != 0) + *goto cont2 */ MIPS32_NOP, /* nop */ - - MIPS32_LUI(9,0), /* lui $t1, 0 */ - MIPS32_ORI(9,9,0x80), /* ori $t1, $t1, 0x80 ; out = 0x80 */ + + MIPS32_LUI(9, 0), /* lui $t1, 0 */ + MIPS32_ORI(9, 9, 0x80), /* ori $t1, $t1, 0x80 ; out = 0x80 */ MIPS32_B(4), /* b done ; goto done */ MIPS32_NOP, /* nop */ - /* cont2: */ - MIPS32_ADDI(5,5,2), /* addi $a0, $a0, 2 ; daddr += 2 */ + /* cont2: */ + MIPS32_ADDI(5, 5, 2), /* addi $a0, $a0, 2 ; daddr += 2 */ MIPS32_B(NEG16(33)), /* b start ; goto start */ MIPS32_NOP, /* nop */ - /* done: */ - /*MIPS32_B(NEG16(1)), */ /* b done ; goto done */ + /* done: + *MIPS32_B(NEG16(1)), */ /* b done ; goto done */ MIPS32_SDBBP, /* sdbbp ; break(); */ - /*MIPS32_B(NEG16(33)), */ /* b start ; goto start */ - /* MIPS32_NOP, */ + /*MIPS32_B(NEG16(33)), */ /* b start ; goto start + * MIPS32_NOP, */ }; mips32_info.common_magic = MIPS32_COMMON_MAGIC; @@ -1562,37 +1498,32 @@ static int cfi_spansion_write_block_mips(struct flash_bank *bank, uint8_t *buffe int target_code_size = 0; const uint32_t *target_code_src = NULL; - switch (bank->bus_width) - { - case 2 : - /* Check for DQ5 support */ - if( cfi_info->status_poll_mask & (1 << 5) ) - { - target_code_src = mips_word_16_code; - target_code_size = sizeof(mips_word_16_code); - } - else - { - LOG_ERROR("Need DQ5 support"); + switch (bank->bus_width) { + case 2: + /* Check for DQ5 support */ + if (cfi_info->status_poll_mask & (1 << 5)) { + target_code_src = mips_word_16_code; + target_code_size = sizeof(mips_word_16_code); + } else { + LOG_ERROR("Need DQ5 support"); + return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; + /* target_code_src = mips_word_16_code_dq7only; */ + /* target_code_size = sizeof(mips_word_16_code_dq7only); */ + } + break; + default: + LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes", + bank->bus_width); return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; - //target_code_src = mips_word_16_code_dq7only; - //target_code_size = sizeof(mips_word_16_code_dq7only); - } - break; - default: - LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank->bus_width); - return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; } /* flash write code */ - if (!cfi_info->write_algorithm) - { + if (!cfi_info->write_algorithm) { uint8_t *target_code; /* convert bus-width dependent algorithm code to correct endiannes */ target_code = malloc(target_code_size); - if (target_code == NULL) - { + if (target_code == NULL) { LOG_ERROR("Out of memory"); return ERROR_FAIL; } @@ -1601,16 +1532,15 @@ static int cfi_spansion_write_block_mips(struct flash_bank *bank, uint8_t *buffe /* allocate working area */ retval = target_alloc_working_area(target, target_code_size, &cfi_info->write_algorithm); - if (retval != ERROR_OK) - { + if (retval != ERROR_OK) { free(target_code); return retval; } /* write algorithm code to working area */ - if ((retval = target_write_buffer(target, cfi_info->write_algorithm->address, - target_code_size, target_code)) != ERROR_OK) - { + retval = target_write_buffer(target, cfi_info->write_algorithm->address, + target_code_size, target_code); + if (retval != ERROR_OK) { free(target_code); return retval; } @@ -1619,20 +1549,20 @@ static int cfi_spansion_write_block_mips(struct flash_bank *bank, uint8_t *buffe } /* the following code still assumes target code is fixed 24*4 bytes */ - while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) - { + while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) { buffer_size /= 2; - if (buffer_size <= 256) - { + if (buffer_size <= 256) { /* if we already allocated the writing code, but failed to get a * buffer, free the algorithm */ if (cfi_info->write_algorithm) target_free_working_area(target, cfi_info->write_algorithm); - LOG_WARNING("not enough working area available, can't do block memory writes"); + LOG_WARNING( + "not enough working area available, can't do block memory writes"); return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; } - }; + } + ; init_reg_param(®_params[0], "a0", 32, PARAM_OUT); init_reg_param(®_params[1], "a1", 32, PARAM_OUT); @@ -1645,15 +1575,12 @@ static int cfi_spansion_write_block_mips(struct flash_bank *bank, uint8_t *buffe init_reg_param(®_params[8], "t6", 32, PARAM_OUT); init_reg_param(®_params[9], "t7", 32, PARAM_OUT); - while (count > 0) - { + while (count > 0) { uint32_t thisrun_count = (count > buffer_size) ? buffer_size : count; retval = target_write_buffer(target, source->address, thisrun_count, buffer); if (retval != ERROR_OK) - { break; - } buf_set_u32(reg_params[0].value, 0, 32, source->address); buf_set_u32(reg_params[1].value, 0, 32, address); @@ -1670,14 +1597,11 @@ static int cfi_spansion_write_block_mips(struct flash_bank *bank, uint8_t *buffe cfi_info->write_algorithm->address + ((target_code_size) - 4), 10000, &mips32_info); if (retval != ERROR_OK) - { break; - } status = buf_get_u32(reg_params[5].value, 0, 32); - if (status != 0x80) - { - LOG_ERROR("flash write block failed status: 0x%" PRIx32 , status); + if (status != 0x80) { + LOG_ERROR("flash write block failed status: 0x%" PRIx32, status); retval = ERROR_FLASH_OPERATION_FAILED; break; } @@ -1704,7 +1628,7 @@ static int cfi_spansion_write_block_mips(struct flash_bank *bank, uint8_t *buffe } static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer, - uint32_t address, uint32_t count) + uint32_t address, uint32_t count) { struct cfi_flash_bank *cfi_info = bank->driver_priv; struct cfi_spansion_pri_ext *pri_ext = cfi_info->pri_ext; @@ -1716,34 +1640,34 @@ static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer, uint32_t status; int retval = ERROR_OK; - /* input parameters - */ - /* R0 = source address */ - /* R1 = destination address */ - /* R2 = number of writes */ - /* R3 = flash write command */ - /* R4 = constant to mask DQ7 bits (also used for Dq5 with shift) */ - /* output parameters - */ - /* R5 = 0x80 ok 0x00 bad */ - /* temp registers - */ - /* R6 = value read from flash to test status */ - /* R7 = holding register */ - /* unlock registers - */ - /* R8 = unlock1_addr */ - /* R9 = unlock1_cmd */ - /* R10 = unlock2_addr */ - /* R11 = unlock2_cmd */ + /* input parameters - + * R0 = source address + * R1 = destination address + * R2 = number of writes + * R3 = flash write command + * R4 = constant to mask DQ7 bits (also used for Dq5 with shift) + * output parameters - + * R5 = 0x80 ok 0x00 bad + * temp registers - + * R6 = value read from flash to test status + * R7 = holding register + * unlock registers - + * R8 = unlock1_addr + * R9 = unlock1_cmd + * R10 = unlock2_addr + * R11 = unlock2_cmd */ /* see contib/loaders/flash/armv4_5_cfi_span_32.s for src */ static const uint32_t armv4_5_word_32_code[] = { - /* 00008100 : */ + /* 00008100 : */ 0xe4905004, /* ldr r5, [r0], #4 */ 0xe5889000, /* str r9, [r8] */ 0xe58ab000, /* str r11, [r10] */ 0xe5883000, /* str r3, [r8] */ 0xe5815000, /* str r5, [r1] */ 0xe1a00000, /* nop */ - /* */ - /* 00008110 : */ + /* + * 00008110 : */ 0xe5916000, /* ldr r6, [r1] */ 0xe0257006, /* eor r7, r5, r6 */ 0xe0147007, /* ands r7, r4, r7 */ @@ -1756,29 +1680,29 @@ static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer, 0x0a000001, /* beq 8140 ; b if DQ7 == Data7 */ 0xe3a05000, /* mov r5, #0 ; 0x0 - return 0x00, error */ 0x1a000004, /* bne 8154 */ - /* */ - /* 00008140 : */ + /* + * 00008140 : */ 0xe2522001, /* subs r2, r2, #1 ; 0x1 */ 0x03a05080, /* moveq r5, #128 ; 0x80 */ 0x0a000001, /* beq 8154 */ 0xe2811004, /* add r1, r1, #4 ; 0x4 */ 0xeaffffe8, /* b 8100 */ - /* */ - /* 00008154 : */ + /* + * 00008154 : */ 0xeafffffe /* b 8154 */ }; /* see contib/loaders/flash/armv4_5_cfi_span_16.s for src */ static const uint32_t armv4_5_word_16_code[] = { - /* 00008158 : */ + /* 00008158 : */ 0xe0d050b2, /* ldrh r5, [r0], #2 */ 0xe1c890b0, /* strh r9, [r8] */ 0xe1cab0b0, /* strh r11, [r10] */ 0xe1c830b0, /* strh r3, [r8] */ 0xe1c150b0, /* strh r5, [r1] */ 0xe1a00000, /* nop (mov r0,r0) */ - /* */ - /* 00008168 : */ + /* + * 00008168 : */ 0xe1d160b0, /* ldrh r6, [r1] */ 0xe0257006, /* eor r7, r5, r6 */ 0xe0147007, /* ands r7, r4, r7 */ @@ -1791,15 +1715,15 @@ static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer, 0x0a000001, /* beq 8198 */ 0xe3a05000, /* mov r5, #0 ; 0x0 */ 0x1a000004, /* bne 81ac */ - /* */ - /* 00008198 : */ - 0xe2522001, /* subs r2, r2, #1 ; 0x1 */ - 0x03a05080, /* moveq r5, #128 ; 0x80 */ - 0x0a000001, /* beq 81ac */ - 0xe2811002, /* add r1, r1, #2 ; 0x2 */ - 0xeaffffe8, /* b 8158 */ - /* */ - /* 000081ac : */ + /* + * 00008198 : */ + 0xe2522001, /* subs r2, r2, #1 ; 0x1 */ + 0x03a05080, /* moveq r5, #128 ; 0x80 */ + 0x0a000001, /* beq 81ac */ + 0xe2811002, /* add r1, r1, #2 ; 0x2 */ + 0xeaffffe8, /* b 8158 */ + /* + * 000081ac : */ 0xeafffffe /* b 81ac */ }; @@ -1827,41 +1751,41 @@ static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer, /* see contib/loaders/flash/armv4_5_cfi_span_16_dq7.s for src */ static const uint32_t armv4_5_word_16_code_dq7only[] = { - /* : */ + /* : */ 0xe0d050b2, /* ldrh r5, [r0], #2 */ 0xe1c890b0, /* strh r9, [r8] */ 0xe1cab0b0, /* strh r11, [r10] */ 0xe1c830b0, /* strh r3, [r8] */ 0xe1c150b0, /* strh r5, [r1] */ 0xe1a00000, /* nop (mov r0,r0) */ - /* */ - /* : */ + /* + * : */ 0xe1d160b0, /* ldrh r6, [r1] */ 0xe0257006, /* eor r7, r5, r6 */ 0xe2177080, /* ands r7, #0x80 */ 0x1afffffb, /* bne 8168 */ - /* */ + /* */ 0xe2522001, /* subs r2, r2, #1 ; 0x1 */ 0x03a05080, /* moveq r5, #128 ; 0x80 */ 0x0a000001, /* beq 81ac */ 0xe2811002, /* add r1, r1, #2 ; 0x2 */ 0xeafffff0, /* b 8158 */ - /* */ - /* 000081ac : */ + /* + * 000081ac : */ 0xeafffffe /* b 81ac */ }; /* see contib/loaders/flash/armv4_5_cfi_span_8.s for src */ static const uint32_t armv4_5_word_8_code[] = { - /* 000081b0 : */ + /* 000081b0 : */ 0xe4d05001, /* ldrb r5, [r0], #1 */ 0xe5c89000, /* strb r9, [r8] */ 0xe5cab000, /* strb r11, [r10] */ 0xe5c83000, /* strb r3, [r8] */ 0xe5c15000, /* strb r5, [r1] */ 0xe1a00000, /* nop (mov r0,r0) */ - /* */ - /* 000081c0 : */ + /* + * 000081c0 : */ 0xe5d16000, /* ldrb r6, [r1] */ 0xe0257006, /* eor r7, r5, r6 */ 0xe0147007, /* ands r7, r4, r7 */ @@ -1874,30 +1798,26 @@ static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer, 0x0a000001, /* beq 81f0 */ 0xe3a05000, /* mov r5, #0 ; 0x0 */ 0x1a000004, /* bne 8204 */ - /* */ - /* 000081f0 : */ + /* + * 000081f0 : */ 0xe2522001, /* subs r2, r2, #1 ; 0x1 */ 0x03a05080, /* moveq r5, #128 ; 0x80 */ 0x0a000001, /* beq 8204 */ 0xe2811001, /* add r1, r1, #1 ; 0x1 */ 0xeaffffe8, /* b 81b0 */ - /* */ - /* 00008204 : */ + /* + * 00008204 : */ 0xeafffffe /* b 8204 */ }; - if (strncmp(target_type_name(target),"mips_m4k",8) == 0) - { - return cfi_spansion_write_block_mips(bank,buffer,address,count); - } + if (strncmp(target_type_name(target), "mips_m4k", 8) == 0) + return cfi_spansion_write_block_mips(bank, buffer, address, count); - if (is_armv7m(target_to_armv7m(target))) /* Cortex-M3 target */ - { + if (is_armv7m(target_to_armv7m(target))) { /* Cortex-M3 target */ armv4_5_info.common_magic = ARMV7M_COMMON_MAGIC; armv4_5_info.core_mode = ARMV7M_MODE_HANDLER; armv4_5_info.core_state = ARM_STATE_ARM; - } else if (is_arm7_9(target_to_arm7_9(target))) - { + } else if (is_arm7_9(target_to_arm7_9(target))) { /* All other ARM CPUs have 32 bit instructions */ armv4_5_info.common_magic = ARM_COMMON_MAGIC; armv4_5_info.core_mode = ARM_MODE_SVC; @@ -1910,64 +1830,59 @@ static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer, int target_code_size = 0; const uint32_t *target_code_src = NULL; - switch (bank->bus_width) - { - case 1 : - if (armv4_5_info.common_magic != ARM_COMMON_MAGIC) { - LOG_ERROR("Unknown ARM architecture"); - return ERROR_FAIL; - } - target_code_src = armv4_5_word_8_code; - target_code_size = sizeof(armv4_5_word_8_code); - break; - case 2 : - /* Check for DQ5 support */ - if( cfi_info->status_poll_mask & (1 << 5) ) - { - if(armv4_5_info.common_magic == ARM_COMMON_MAGIC) /* armv4_5 target */ - { - target_code_src = armv4_5_word_16_code; - target_code_size = sizeof(armv4_5_word_16_code); + switch (bank->bus_width) { + case 1: + if (armv4_5_info.common_magic != ARM_COMMON_MAGIC) { + LOG_ERROR("Unknown ARM architecture"); + return ERROR_FAIL; } - else if (armv4_5_info.common_magic == ARMV7M_COMMON_MAGIC) /* cortex-m3 target */ - { - target_code_src = armv7m_word_16_code; - target_code_size = sizeof(armv7m_word_16_code); + target_code_src = armv4_5_word_8_code; + target_code_size = sizeof(armv4_5_word_8_code); + break; + case 2: + /* Check for DQ5 support */ + if (cfi_info->status_poll_mask & (1 << 5)) { + if (armv4_5_info.common_magic == ARM_COMMON_MAGIC) {/* armv4_5 target */ + target_code_src = armv4_5_word_16_code; + target_code_size = sizeof(armv4_5_word_16_code); + } else if (armv4_5_info.common_magic == ARMV7M_COMMON_MAGIC) { /* + *cortex-m3 + *target + **/ + target_code_src = armv7m_word_16_code; + target_code_size = sizeof(armv7m_word_16_code); + } + } else { + /* No DQ5 support. Use DQ7 DATA# polling only. */ + if (armv4_5_info.common_magic != ARM_COMMON_MAGIC) { + LOG_ERROR("Unknown ARM architecture"); + return ERROR_FAIL; + } + target_code_src = armv4_5_word_16_code_dq7only; + target_code_size = sizeof(armv4_5_word_16_code_dq7only); } - } - else - { - /* No DQ5 support. Use DQ7 DATA# polling only. */ + break; + case 4: if (armv4_5_info.common_magic != ARM_COMMON_MAGIC) { LOG_ERROR("Unknown ARM architecture"); return ERROR_FAIL; } - target_code_src = armv4_5_word_16_code_dq7only; - target_code_size = sizeof(armv4_5_word_16_code_dq7only); - } - break; - case 4 : - if (armv4_5_info.common_magic != ARM_COMMON_MAGIC) { - LOG_ERROR("Unknown ARM architecture"); - return ERROR_FAIL; - } - target_code_src = armv4_5_word_32_code; - target_code_size = sizeof(armv4_5_word_32_code); - break; - default: - LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank->bus_width); - return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; + target_code_src = armv4_5_word_32_code; + target_code_size = sizeof(armv4_5_word_32_code); + break; + default: + LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes", + bank->bus_width); + return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; } /* flash write code */ - if (!cfi_info->write_algorithm) - { + if (!cfi_info->write_algorithm) { uint8_t *target_code; /* convert bus-width dependent algorithm code to correct endiannes */ target_code = malloc(target_code_size); - if (target_code == NULL) - { + if (target_code == NULL) { LOG_ERROR("Out of memory"); return ERROR_FAIL; } @@ -1976,16 +1891,15 @@ static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer, /* allocate working area */ retval = target_alloc_working_area(target, target_code_size, &cfi_info->write_algorithm); - if (retval != ERROR_OK) - { + if (retval != ERROR_OK) { free(target_code); return retval; } /* write algorithm code to working area */ - if ((retval = target_write_buffer(target, cfi_info->write_algorithm->address, - target_code_size, target_code)) != ERROR_OK) - { + retval = target_write_buffer(target, cfi_info->write_algorithm->address, + target_code_size, target_code); + if (retval != ERROR_OK) { free(target_code); return retval; } @@ -1994,20 +1908,20 @@ static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer, } /* the following code still assumes target code is fixed 24*4 bytes */ - while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) - { + while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) { buffer_size /= 2; - if (buffer_size <= 256) - { + if (buffer_size <= 256) { /* if we already allocated the writing code, but failed to get a * buffer, free the algorithm */ if (cfi_info->write_algorithm) target_free_working_area(target, cfi_info->write_algorithm); - LOG_WARNING("not enough working area available, can't do block memory writes"); + LOG_WARNING( + "not enough working area available, can't do block memory writes"); return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; } - }; + } + ; init_reg_param(®_params[0], "r0", 32, PARAM_OUT); init_reg_param(®_params[1], "r1", 32, PARAM_OUT); @@ -2020,15 +1934,12 @@ static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer, init_reg_param(®_params[8], "r10", 32, PARAM_OUT); init_reg_param(®_params[9], "r11", 32, PARAM_OUT); - while (count > 0) - { + while (count > 0) { uint32_t thisrun_count = (count > buffer_size) ? buffer_size : count; retval = target_write_buffer(target, source->address, thisrun_count, buffer); if (retval != ERROR_OK) - { break; - } buf_set_u32(reg_params[0].value, 0, 32, source->address); buf_set_u32(reg_params[1].value, 0, 32, address); @@ -2045,14 +1956,11 @@ static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer, cfi_info->write_algorithm->address + ((target_code_size) - 4), 10000, &armv4_5_info); if (retval != ERROR_OK) - { break; - } status = buf_get_u32(reg_params[5].value, 0, 32); - if (status != 0x80) - { - LOG_ERROR("flash write block failed status: 0x%" PRIx32 , status); + if (status != 0x80) { + LOG_ERROR("flash write block failed status: 0x%" PRIx32, status); retval = ERROR_FLASH_OPERATION_FAILED; break; } @@ -2085,27 +1993,23 @@ static int cfi_intel_write_word(struct flash_bank *bank, uint8_t *word, uint32_t struct target *target = bank->target; cfi_intel_clear_status_register(bank); - if ((retval = cfi_send_command(bank, 0x40, address)) != ERROR_OK) - { + retval = cfi_send_command(bank, 0x40, address); + if (retval != ERROR_OK) return retval; - } - if ((retval = target_write_memory(target, address, bank->bus_width, 1, word)) != ERROR_OK) - { + retval = target_write_memory(target, address, bank->bus_width, 1, word); + if (retval != ERROR_OK) return retval; - } uint8_t status; retval = cfi_intel_wait_status_busy(bank, cfi_info->word_write_timeout, &status); - if (retval != 0x80) - { - if ((retval = cfi_send_command(bank, 0xff, flash_address(bank, 0, 0x0))) != ERROR_OK) - { + if (retval != 0x80) { + retval = cfi_send_command(bank, 0xff, flash_address(bank, 0, 0x0)); + if (retval != ERROR_OK) return retval; - } LOG_ERROR("couldn't write word at base 0x%" PRIx32 ", address 0x%" PRIx32, - bank->base, address); + bank->base, address); return ERROR_FLASH_OPERATION_FAILED; } @@ -2113,33 +2017,32 @@ static int cfi_intel_write_word(struct flash_bank *bank, uint8_t *word, uint32_t } static int cfi_intel_write_words(struct flash_bank *bank, uint8_t *word, - uint32_t wordcount, uint32_t address) + uint32_t wordcount, uint32_t address) { int retval; struct cfi_flash_bank *cfi_info = bank->driver_priv; struct target *target = bank->target; - /* Calculate buffer size and boundary mask */ - /* buffersize is (buffer size per chip) * (number of chips) */ - /* bufferwsize is buffersize in words */ - uint32_t buffersize = (1UL << cfi_info->max_buf_write_size) * (bank->bus_width / bank->chip_width); + /* Calculate buffer size and boundary mask + * buffersize is (buffer size per chip) * (number of chips) + * bufferwsize is buffersize in words */ + uint32_t buffersize = + (1UL << cfi_info->max_buf_write_size) * (bank->bus_width / bank->chip_width); uint32_t buffermask = buffersize-1; uint32_t bufferwsize = buffersize / bank->bus_width; /* Check for valid range */ - if (address & buffermask) - { + if (address & buffermask) { LOG_ERROR("Write address at base 0x%" PRIx32 ", address 0x%" PRIx32 - " not aligned to 2^%d boundary", - bank->base, address, cfi_info->max_buf_write_size); + " not aligned to 2^%d boundary", + bank->base, address, cfi_info->max_buf_write_size); return ERROR_FLASH_OPERATION_FAILED; } /* Check for valid size */ - if (wordcount > bufferwsize) - { + if (wordcount > bufferwsize) { LOG_ERROR("Number of data words %" PRId32 " exceeds available buffersize %" PRId32, - wordcount, buffersize); + wordcount, buffersize); return ERROR_FLASH_OPERATION_FAILED; } @@ -2147,58 +2050,50 @@ static int cfi_intel_write_words(struct flash_bank *bank, uint8_t *word, cfi_intel_clear_status_register(bank); /* Initiate buffer operation _*/ - if ((retval = cfi_send_command(bank, 0xe8, address)) != ERROR_OK) - { + retval = cfi_send_command(bank, 0xe8, address); + if (retval != ERROR_OK) return retval; - } uint8_t status; retval = cfi_intel_wait_status_busy(bank, cfi_info->buf_write_timeout, &status); if (retval != ERROR_OK) return retval; - if (status != 0x80) - { - if ((retval = cfi_send_command(bank, 0xff, flash_address(bank, 0, 0x0))) != ERROR_OK) - { + if (status != 0x80) { + retval = cfi_send_command(bank, 0xff, flash_address(bank, 0, 0x0)); + if (retval != ERROR_OK) return retval; - } - LOG_ERROR("couldn't start buffer write operation at base 0x%" PRIx32 ", address 0x%" PRIx32, - bank->base, address); + LOG_ERROR( + "couldn't start buffer write operation at base 0x%" PRIx32 ", address 0x%" PRIx32, + bank->base, + address); return ERROR_FLASH_OPERATION_FAILED; } /* Write buffer wordcount-1 and data words */ - if ((retval = cfi_send_command(bank, bufferwsize-1, address)) != ERROR_OK) - { + retval = cfi_send_command(bank, bufferwsize-1, address); + if (retval != ERROR_OK) return retval; - } - if ((retval = target_write_memory(target, - address, bank->bus_width, bufferwsize, word)) != ERROR_OK) - { + retval = target_write_memory(target, address, bank->bus_width, bufferwsize, word); + if (retval != ERROR_OK) return retval; - } /* Commit write operation */ - if ((retval = cfi_send_command(bank, 0xd0, address)) != ERROR_OK) - { + retval = cfi_send_command(bank, 0xd0, address); + if (retval != ERROR_OK) return retval; - } retval = cfi_intel_wait_status_busy(bank, cfi_info->buf_write_timeout, &status); if (retval != ERROR_OK) return retval; - if (status != 0x80) - { - if ((retval = cfi_send_command(bank, 0xff, - flash_address(bank, 0, 0x0))) != ERROR_OK) - { + if (status != 0x80) { + retval = cfi_send_command(bank, 0xff, flash_address(bank, 0, 0x0)); + if (retval != ERROR_OK) return retval; - } LOG_ERROR("Buffer write at base 0x%" PRIx32 - ", address 0x%" PRIx32 " failed.", bank->base, address); + ", address 0x%" PRIx32 " failed.", bank->base, address); return ERROR_FLASH_OPERATION_FAILED; } @@ -2212,39 +2107,29 @@ static int cfi_spansion_write_word(struct flash_bank *bank, uint8_t *word, uint3 struct cfi_spansion_pri_ext *pri_ext = cfi_info->pri_ext; struct target *target = bank->target; - if ((retval = cfi_send_command(bank, 0xaa, - flash_address(bank, 0, pri_ext->_unlock1))) != ERROR_OK) - { + retval = cfi_send_command(bank, 0xaa, flash_address(bank, 0, pri_ext->_unlock1)); + if (retval != ERROR_OK) return retval; - } - if ((retval = cfi_send_command(bank, 0x55, - flash_address(bank, 0, pri_ext->_unlock2))) != ERROR_OK) - { + retval = cfi_send_command(bank, 0x55, flash_address(bank, 0, pri_ext->_unlock2)); + if (retval != ERROR_OK) return retval; - } - if ((retval = cfi_send_command(bank, 0xa0, - flash_address(bank, 0, pri_ext->_unlock1))) != ERROR_OK) - { + retval = cfi_send_command(bank, 0xa0, flash_address(bank, 0, pri_ext->_unlock1)); + if (retval != ERROR_OK) return retval; - } - if ((retval = target_write_memory(target, - address, bank->bus_width, 1, word)) != ERROR_OK) - { + retval = target_write_memory(target, address, bank->bus_width, 1, word); + if (retval != ERROR_OK) return retval; - } - if (cfi_spansion_wait_status_busy(bank, cfi_info->word_write_timeout) != ERROR_OK) - { - if ((retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0))) != ERROR_OK) - { + if (cfi_spansion_wait_status_busy(bank, cfi_info->word_write_timeout) != ERROR_OK) { + retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0)); + if (retval != ERROR_OK) return retval; - } LOG_ERROR("couldn't write word at base 0x%" PRIx32 - ", address 0x%" PRIx32 , bank->base, address); + ", address 0x%" PRIx32, bank->base, address); return ERROR_FLASH_OPERATION_FAILED; } @@ -2252,84 +2137,72 @@ static int cfi_spansion_write_word(struct flash_bank *bank, uint8_t *word, uint3 } static int cfi_spansion_write_words(struct flash_bank *bank, uint8_t *word, - uint32_t wordcount, uint32_t address) + uint32_t wordcount, uint32_t address) { int retval; struct cfi_flash_bank *cfi_info = bank->driver_priv; struct target *target = bank->target; struct cfi_spansion_pri_ext *pri_ext = cfi_info->pri_ext; - /* Calculate buffer size and boundary mask */ - /* buffersize is (buffer size per chip) * (number of chips) */ - /* bufferwsize is buffersize in words */ - uint32_t buffersize = (1UL << cfi_info->max_buf_write_size) * (bank->bus_width / bank->chip_width); + /* Calculate buffer size and boundary mask + * buffersize is (buffer size per chip) * (number of chips) + * bufferwsize is buffersize in words */ + uint32_t buffersize = + (1UL << cfi_info->max_buf_write_size) * (bank->bus_width / bank->chip_width); uint32_t buffermask = buffersize-1; uint32_t bufferwsize = buffersize / bank->bus_width; /* Check for valid range */ - if (address & buffermask) - { + if (address & buffermask) { LOG_ERROR("Write address at base 0x%" PRIx32 - ", address 0x%" PRIx32 " not aligned to 2^%d boundary", - bank->base, address, cfi_info->max_buf_write_size); + ", address 0x%" PRIx32 " not aligned to 2^%d boundary", + bank->base, address, cfi_info->max_buf_write_size); return ERROR_FLASH_OPERATION_FAILED; } /* Check for valid size */ - if (wordcount > bufferwsize) - { + if (wordcount > bufferwsize) { LOG_ERROR("Number of data words %" PRId32 " exceeds available buffersize %" - PRId32, wordcount, buffersize); + PRId32, wordcount, buffersize); return ERROR_FLASH_OPERATION_FAILED; } /* Unlock */ - if ((retval = cfi_send_command(bank, 0xaa, - flash_address(bank, 0, pri_ext->_unlock1))) != ERROR_OK) - { + retval = cfi_send_command(bank, 0xaa, flash_address(bank, 0, pri_ext->_unlock1)); + if (retval != ERROR_OK) return retval; - } - if ((retval = cfi_send_command(bank, 0x55, - flash_address(bank, 0, pri_ext->_unlock2))) != ERROR_OK) - { + retval = cfi_send_command(bank, 0x55, flash_address(bank, 0, pri_ext->_unlock2)); + if (retval != ERROR_OK) return retval; - } /* Buffer load command */ - if ((retval = cfi_send_command(bank, 0x25, address)) != ERROR_OK) - { + retval = cfi_send_command(bank, 0x25, address); + if (retval != ERROR_OK) return retval; - } /* Write buffer wordcount-1 and data words */ - if ((retval = cfi_send_command(bank, bufferwsize-1, address)) != ERROR_OK) - { + retval = cfi_send_command(bank, bufferwsize-1, address); + if (retval != ERROR_OK) return retval; - } - if ((retval = target_write_memory(target, - address, bank->bus_width, bufferwsize, word)) != ERROR_OK) - { + retval = target_write_memory(target, address, bank->bus_width, bufferwsize, word); + if (retval != ERROR_OK) return retval; - } /* Commit write operation */ - if ((retval = cfi_send_command(bank, 0x29, address)) != ERROR_OK) - { + retval = cfi_send_command(bank, 0x29, address); + if (retval != ERROR_OK) return retval; - } - if (cfi_spansion_wait_status_busy(bank, cfi_info->buf_write_timeout) != ERROR_OK) - { - if ((retval = cfi_send_command(bank, 0xf0, - flash_address(bank, 0, 0x0))) != ERROR_OK) - { + if (cfi_spansion_wait_status_busy(bank, cfi_info->buf_write_timeout) != ERROR_OK) { + retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0)); + if (retval != ERROR_OK) return retval; - } LOG_ERROR("couldn't write block at base 0x%" PRIx32 - ", address 0x%" PRIx32 ", size 0x%" PRIx32, bank->base, address, bufferwsize); + ", address 0x%" PRIx32 ", size 0x%" PRIx32, bank->base, address, + bufferwsize); return ERROR_FLASH_OPERATION_FAILED; } @@ -2340,8 +2213,7 @@ static int cfi_write_word(struct flash_bank *bank, uint8_t *word, uint32_t addre { struct cfi_flash_bank *cfi_info = bank->driver_priv; - switch (cfi_info->pri_id) - { + switch (cfi_info->pri_id) { case 1: case 3: return cfi_intel_write_word(bank, word, address); @@ -2358,19 +2230,17 @@ static int cfi_write_word(struct flash_bank *bank, uint8_t *word, uint32_t addre } static int cfi_write_words(struct flash_bank *bank, uint8_t *word, - uint32_t wordcount, uint32_t address) + uint32_t wordcount, uint32_t address) { struct cfi_flash_bank *cfi_info = bank->driver_priv; - if (cfi_info->buf_write_timeout_typ == 0) - { + if (cfi_info->buf_write_timeout_typ == 0) { /* buffer writes are not supported */ LOG_DEBUG("Buffer Writes Not Supported"); return ERROR_FLASH_OPER_UNSUPPORTED; } - switch (cfi_info->pri_id) - { + switch (cfi_info->pri_id) { case 1: case 3: return cfi_intel_write_words(bank, word, wordcount, address); @@ -2400,8 +2270,7 @@ static int cfi_read(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, u LOG_DEBUG("reading buffer of %i byte at 0x%8.8x", (int)count, (unsigned)offset); - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -2414,13 +2283,13 @@ static int cfi_read(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, u /* start at the first byte of the first word (bus_width size) */ read_p = address & ~(bank->bus_width - 1); - if ((align = address - read_p) != 0) - { + align = address - read_p; + if (align != 0) { LOG_INFO("Fixup %d unaligned read head bytes", align); /* read a complete word from flash */ - if ((retval = target_read_memory(target, read_p, - bank->bus_width, 1, current_word)) != ERROR_OK) + retval = target_read_memory(target, read_p, bank->bus_width, 1, current_word); + if (retval != ERROR_OK) return retval; /* take only bytes we need */ @@ -2431,10 +2300,9 @@ static int cfi_read(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, u } align = count / bank->bus_width; - if (align) - { - if ((retval = target_read_memory(target, read_p, - bank->bus_width, align, buffer)) != ERROR_OK) + if (align) { + retval = target_read_memory(target, read_p, bank->bus_width, align, buffer); + if (retval != ERROR_OK) return retval; read_p += align * bank->bus_width; @@ -2442,13 +2310,12 @@ static int cfi_read(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, u count -= align * bank->bus_width; } - if (count) - { + if (count) { LOG_INFO("Fixup %d unaligned read tail bytes", count); /* read a complete word from flash */ - if ((retval = target_read_memory(target, read_p, - bank->bus_width, 1, current_word)) != ERROR_OK) + retval = target_read_memory(target, read_p, bank->bus_width, 1, current_word); + if (retval != ERROR_OK) return retval; /* take only bytes we need */ @@ -2466,13 +2333,13 @@ static int cfi_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, uint32_t address = bank->base + offset; /* address of first byte to be programmed */ uint32_t write_p; int align; /* number of unaligned bytes */ - int blk_count; /* number of bus_width bytes for block copy */ - uint8_t current_word[CFI_MAX_BUS_WIDTH * 4]; /* word (bus_width size) currently being programmed */ + int blk_count; /* number of bus_width bytes for block copy */ + uint8_t current_word[CFI_MAX_BUS_WIDTH * 4]; /* word (bus_width size) currently being + *programmed */ int i; int retval; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -2485,13 +2352,13 @@ static int cfi_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, /* start at the first byte of the first word (bus_width size) */ write_p = address & ~(bank->bus_width - 1); - if ((align = address - write_p) != 0) - { + align = address - write_p; + if (align != 0) { LOG_INFO("Fixup %d unaligned head bytes", align); /* read a complete word from flash */ - if ((retval = target_read_memory(target, write_p, - bank->bus_width, 1, current_word)) != ERROR_OK) + retval = target_read_memory(target, write_p, bank->bus_width, 1, current_word); + if (retval != ERROR_OK) return retval; /* replace only bytes that must be written */ @@ -2505,9 +2372,8 @@ static int cfi_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, } /* handle blocks of bus_size aligned bytes */ - blk_count = count & ~(bank->bus_width - 1); /* round down, leave tail bytes */ - switch (cfi_info->pri_id) - { + blk_count = count & ~(bank->bus_width - 1); /* round down, leave tail bytes */ + switch (cfi_info->pri_id) { /* try block writes (fails without working area) */ case 1: case 3: @@ -2521,50 +2387,44 @@ static int cfi_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, retval = ERROR_FLASH_OPERATION_FAILED; break; } - if (retval == ERROR_OK) - { + if (retval == ERROR_OK) { /* Increment pointers and decrease count on succesful block write */ buffer += blk_count; write_p += blk_count; count -= blk_count; - } - else - { - if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) - { - /* Calculate buffer size and boundary mask */ - /* buffersize is (buffer size per chip) * (number of chips) */ - /* bufferwsize is buffersize in words */ - uint32_t buffersize = (1UL << cfi_info->max_buf_write_size) * (bank->bus_width / bank->chip_width); + } else { + if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) { + /* Calculate buffer size and boundary mask + * buffersize is (buffer size per chip) * (number of chips) + * bufferwsize is buffersize in words */ + uint32_t buffersize = + (1UL << + cfi_info->max_buf_write_size) * + (bank->bus_width / bank->chip_width); uint32_t buffermask = buffersize-1; uint32_t bufferwsize = buffersize / bank->bus_width; /* fall back to memory writes */ - while (count >= (uint32_t)bank->bus_width) - { + while (count >= (uint32_t)bank->bus_width) { int fallback; - if ((write_p & 0xff) == 0) - { + if ((write_p & 0xff) == 0) { LOG_INFO("Programming at 0x%08" PRIx32 ", count 0x%08" - PRIx32 " bytes remaining", write_p, count); + PRIx32 " bytes remaining", write_p, count); } fallback = 1; - if ((bufferwsize > 0) && (count >= buffersize) && !(write_p & buffermask)) - { + if ((bufferwsize > 0) && (count >= buffersize) && + !(write_p & buffermask)) { retval = cfi_write_words(bank, buffer, bufferwsize, write_p); - if (retval == ERROR_OK) - { + if (retval == ERROR_OK) { buffer += buffersize; write_p += buffersize; count -= buffersize; fallback = 0; - } - else if (retval != ERROR_FLASH_OPER_UNSUPPORTED) + } else if (retval != ERROR_FLASH_OPER_UNSUPPORTED) return retval; } /* try the slow way? */ - if (fallback) - { + if (fallback) { for (i = 0; i < bank->bus_width; i++) current_word[i] = *buffer++; @@ -2576,25 +2436,22 @@ static int cfi_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, count -= bank->bus_width; } } - } - else + } else return retval; } /* return to read array mode, so we can read from flash again for padding */ - if ((retval = cfi_reset(bank)) != ERROR_OK) - { + retval = cfi_reset(bank); + if (retval != ERROR_OK) return retval; - } /* handle unaligned tail bytes */ - if (count > 0) - { + if (count > 0) { LOG_INFO("Fixup %" PRId32 " unaligned tail bytes", count); /* read a complete word from flash */ - if ((retval = target_read_memory(target, write_p, - bank->bus_width, 1, current_word)) != ERROR_OK) + retval = target_read_memory(target, write_p, bank->bus_width, 1, current_word); + if (retval != ERROR_OK) return retval; /* replace only bytes that must be written */ @@ -2626,12 +2483,10 @@ static void cfi_fixup_0002_erase_regions(struct flash_bank *bank, void *param) struct cfi_spansion_pri_ext *pri_ext = cfi_info->pri_ext; (void) param; - if ((pri_ext->_reversed_geometry) || (pri_ext->TopBottom == 3)) - { + if ((pri_ext->_reversed_geometry) || (pri_ext->TopBottom == 3)) { LOG_DEBUG("swapping reversed erase region information on cmdset 0002 device"); - for (i = 0; i < cfi_info->num_erase_regions / 2; i++) - { + for (i = 0; i < cfi_info->num_erase_regions / 2; i++) { int j = (cfi_info->num_erase_regions - 1) - i; uint32_t swap; @@ -2658,10 +2513,9 @@ static int cfi_query_string(struct flash_bank *bank, int address) struct cfi_flash_bank *cfi_info = bank->driver_priv; int retval; - if ((retval = cfi_send_command(bank, 0x98, flash_address(bank, 0, address))) != ERROR_OK) - { + retval = cfi_send_command(bank, 0x98, flash_address(bank, 0, address)); + if (retval != ERROR_OK) return retval; - } retval = cfi_query_u8(bank, 0, 0x10, &cfi_info->qry[0]); if (retval != ERROR_OK) @@ -2674,14 +2528,12 @@ static int cfi_query_string(struct flash_bank *bank, int address) return retval; LOG_DEBUG("CFI qry returned: 0x%2.2x 0x%2.2x 0x%2.2x", - cfi_info->qry[0], cfi_info->qry[1], cfi_info->qry[2]); + cfi_info->qry[0], cfi_info->qry[1], cfi_info->qry[2]); - if ((cfi_info->qry[0] != 'Q') || (cfi_info->qry[1] != 'R') || (cfi_info->qry[2] != 'Y')) - { - if ((retval = cfi_reset(bank)) != ERROR_OK) - { + if ((cfi_info->qry[0] != 'Q') || (cfi_info->qry[1] != 'R') || (cfi_info->qry[2] != 'Y')) { + retval = cfi_reset(bank); + if (retval != ERROR_OK) return retval; - } LOG_ERROR("Could not probe bank: no QRY"); return ERROR_FLASH_BANK_INVALID; } @@ -2701,21 +2553,18 @@ static int cfi_probe(struct flash_bank *bank) int retval; uint8_t value_buf0[CFI_MAX_BUS_WIDTH], value_buf1[CFI_MAX_BUS_WIDTH]; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } cfi_info->probed = 0; cfi_info->num_erase_regions = 0; - if (bank->sectors) - { + if (bank->sectors) { free(bank->sectors); bank->sectors = NULL; } - if(cfi_info->erase_region_info) - { + if (cfi_info->erase_region_info) { free(cfi_info->erase_region_info); cfi_info->erase_region_info = NULL; } @@ -2723,36 +2572,30 @@ static int cfi_probe(struct flash_bank *bank) /* JEDEC standard JESD21C uses 0x5555 and 0x2aaa as unlock addresses, * while CFI compatible AMD/Spansion flashes use 0x555 and 0x2aa */ - if (cfi_info->jedec_probe) - { + if (cfi_info->jedec_probe) { unlock1 = 0x5555; unlock2 = 0x2aaa; } /* switch to read identifier codes mode ("AUTOSELECT") */ - if ((retval = cfi_send_command(bank, 0xaa, flash_address(bank, 0, unlock1))) != ERROR_OK) - { + retval = cfi_send_command(bank, 0xaa, flash_address(bank, 0, unlock1)); + if (retval != ERROR_OK) return retval; - } - if ((retval = cfi_send_command(bank, 0x55, flash_address(bank, 0, unlock2))) != ERROR_OK) - { + retval = cfi_send_command(bank, 0x55, flash_address(bank, 0, unlock2)); + if (retval != ERROR_OK) return retval; - } - if ((retval = cfi_send_command(bank, 0x90, flash_address(bank, 0, unlock1))) != ERROR_OK) - { + retval = cfi_send_command(bank, 0x90, flash_address(bank, 0, unlock1)); + if (retval != ERROR_OK) return retval; - } - if ((retval = target_read_memory(target, flash_address(bank, 0, 0x00), - bank->bus_width, 1, value_buf0)) != ERROR_OK) - { + retval = target_read_memory(target, flash_address(bank, 0, 0x00), + bank->bus_width, 1, value_buf0); + if (retval != ERROR_OK) return retval; - } - if ((retval = target_read_memory(target, flash_address(bank, 0, 0x01), - bank->bus_width, 1, value_buf1)) != ERROR_OK) - { + retval = target_read_memory(target, flash_address(bank, 0, 0x01), + bank->bus_width, 1, value_buf1); + if (retval != ERROR_OK) return retval; - } switch (bank->chip_width) { case 1: cfi_info->manufacturer = *value_buf0; @@ -2767,17 +2610,17 @@ static int cfi_probe(struct flash_bank *bank) cfi_info->device_id = target_buffer_get_u32(target, value_buf1); break; default: - LOG_ERROR("Unsupported bank chipwidth %d, can't probe memory", bank->chip_width); + LOG_ERROR("Unsupported bank chipwidth %d, can't probe memory", + bank->chip_width); return ERROR_FLASH_OPERATION_FAILED; } LOG_INFO("Flash Manufacturer/Device: 0x%04x 0x%04x", - cfi_info->manufacturer, cfi_info->device_id); + cfi_info->manufacturer, cfi_info->device_id); /* switch back to read array mode */ - if ((retval = cfi_reset(bank)) != ERROR_OK) - { + retval = cfi_reset(bank); + if (retval != ERROR_OK) return retval; - } /* check device/manufacturer ID for known non-CFI flashes. */ cfi_fixup_non_cfi(bank); @@ -2785,8 +2628,7 @@ static int cfi_probe(struct flash_bank *bank) /* query only if this is a CFI compatible flash, * otherwise the relevant info has already been filled in */ - if (cfi_info->not_cfi == 0) - { + if (cfi_info->not_cfi == 0) { /* enter CFI query mode * according to JEDEC Standard No. 68.01, * a single bus sequence with address = 0x55, data = 0x98 should put @@ -2796,8 +2638,7 @@ static int cfi_probe(struct flash_bank *bank) */ retval = cfi_query_string(bank, 0x55); - if (retval != ERROR_OK) - { + if (retval != ERROR_OK) { /* * Spansion S29WS-N CFI query fix is to try 0x555 if 0x55 fails. Should * be harmless enough: @@ -2824,9 +2665,9 @@ static int cfi_probe(struct flash_bank *bank) return retval; LOG_DEBUG("qry: '%c%c%c', pri_id: 0x%4.4x, pri_addr: 0x%4.4x, alt_id: " - "0x%4.4x, alt_addr: 0x%4.4x", cfi_info->qry[0], cfi_info->qry[1], - cfi_info->qry[2], cfi_info->pri_id, cfi_info->pri_addr, - cfi_info->alt_id, cfi_info->alt_addr); + "0x%4.4x, alt_addr: 0x%4.4x", cfi_info->qry[0], cfi_info->qry[1], + cfi_info->qry[2], cfi_info->pri_id, cfi_info->pri_addr, + cfi_info->alt_id, cfi_info->alt_addr); retval = cfi_query_u8(bank, 0, 0x1b, &cfi_info->vcc_min); if (retval != ERROR_OK) @@ -2883,32 +2724,32 @@ static int cfi_probe(struct flash_bank *bank) return retval; LOG_DEBUG("size: 0x%" PRIx32 ", interface desc: %i, max buffer write size: 0x%x", - cfi_info->dev_size, cfi_info->interface_desc, (1 << cfi_info->max_buf_write_size)); + cfi_info->dev_size, cfi_info->interface_desc, + (1 << cfi_info->max_buf_write_size)); - if (cfi_info->num_erase_regions) - { + if (cfi_info->num_erase_regions) { cfi_info->erase_region_info = malloc(sizeof(*cfi_info->erase_region_info) * cfi_info->num_erase_regions); - for (i = 0; i < cfi_info->num_erase_regions; i++) - { - retval = cfi_query_u32(bank, 0, 0x2d + (4 * i), &cfi_info->erase_region_info[i]); + for (i = 0; i < cfi_info->num_erase_regions; i++) { + retval = cfi_query_u32(bank, + 0, + 0x2d + (4 * i), + &cfi_info->erase_region_info[i]); if (retval != ERROR_OK) return retval; - LOG_DEBUG("erase region[%i]: %" PRIu32 " blocks of size 0x%" PRIx32 "", i, - (cfi_info->erase_region_info[i] & 0xffff) + 1, - (cfi_info->erase_region_info[i] >> 16) * 256); + LOG_DEBUG( + "erase region[%i]: %" PRIu32 " blocks of size 0x%" PRIx32 "", + i, + (cfi_info->erase_region_info[i] & 0xffff) + 1, + (cfi_info->erase_region_info[i] >> 16) * 256); } - } - else - { + } else cfi_info->erase_region_info = NULL; - } /* We need to read the primary algorithm extended query table before calculating * the sector layout to be able to apply fixups */ - switch (cfi_info->pri_id) - { + switch (cfi_info->pri_id) { /* Intel command set (standard and extended) */ case 0x0001: case 0x0003: @@ -2916,7 +2757,13 @@ static int cfi_probe(struct flash_bank *bank) break; /* AMD/Spansion, Atmel, ... command set */ case 0x0002: - cfi_info->status_poll_mask = CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7; /* default for all CFI flashs */ + cfi_info->status_poll_mask = CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7; /* + *default + *for + *all + *CFI + *flashs + **/ cfi_read_0002_pri_ext(bank); break; default: @@ -2927,11 +2774,10 @@ static int cfi_probe(struct flash_bank *bank) /* return to read array mode * we use both reset commands, as some Intel flashes fail to recognize the 0xF0 command */ - if ((retval = cfi_reset(bank)) != ERROR_OK) - { + retval = cfi_reset(bank); + if (retval != ERROR_OK) return retval; - } - } /* end CFI case */ + } /* end CFI case */ LOG_DEBUG("Vcc min: %x.%x, Vcc max: %x.%x, Vpp min: %u.%x, Vpp max: %u.%x", (cfi_info->vcc_min & 0xf0) >> 4, cfi_info->vcc_min & 0x0f, @@ -2940,35 +2786,34 @@ static int cfi_probe(struct flash_bank *bank) (cfi_info->vpp_max & 0xf0) >> 4, cfi_info->vpp_max & 0x0f); LOG_DEBUG("typ. word write timeout: %u us, typ. buf write timeout: %u us, " - "typ. block erase timeout: %u ms, typ. chip erase timeout: %u ms", - 1 << cfi_info->word_write_timeout_typ, 1 << cfi_info->buf_write_timeout_typ, - 1 << cfi_info->block_erase_timeout_typ, 1 << cfi_info->chip_erase_timeout_typ); + "typ. block erase timeout: %u ms, typ. chip erase timeout: %u ms", + 1 << cfi_info->word_write_timeout_typ, 1 << cfi_info->buf_write_timeout_typ, + 1 << cfi_info->block_erase_timeout_typ, 1 << cfi_info->chip_erase_timeout_typ); LOG_DEBUG("max. word write timeout: %u us, max. buf write timeout: %u us, " - "max. block erase timeout: %u ms, max. chip erase timeout: %u ms", - (1 << cfi_info->word_write_timeout_max) * (1 << cfi_info->word_write_timeout_typ), - (1 << cfi_info->buf_write_timeout_max) * (1 << cfi_info->buf_write_timeout_typ), - (1 << cfi_info->block_erase_timeout_max) * (1 << cfi_info->block_erase_timeout_typ), - (1 << cfi_info->chip_erase_timeout_max) * (1 << cfi_info->chip_erase_timeout_typ)); + "max. block erase timeout: %u ms, max. chip erase timeout: %u ms", + (1 << cfi_info->word_write_timeout_max) * (1 << cfi_info->word_write_timeout_typ), + (1 << cfi_info->buf_write_timeout_max) * (1 << cfi_info->buf_write_timeout_typ), + (1 << cfi_info->block_erase_timeout_max) * (1 << cfi_info->block_erase_timeout_typ), + (1 << cfi_info->chip_erase_timeout_max) * (1 << cfi_info->chip_erase_timeout_typ)); /* convert timeouts to real values in ms */ cfi_info->word_write_timeout = DIV_ROUND_UP((1L << cfi_info->word_write_timeout_typ) * - (1L << cfi_info->word_write_timeout_max), 1000); + (1L << cfi_info->word_write_timeout_max), 1000); cfi_info->buf_write_timeout = DIV_ROUND_UP((1L << cfi_info->buf_write_timeout_typ) * - (1L << cfi_info->buf_write_timeout_max), 1000); + (1L << cfi_info->buf_write_timeout_max), 1000); cfi_info->block_erase_timeout = (1L << cfi_info->block_erase_timeout_typ) * - (1L << cfi_info->block_erase_timeout_max); + (1L << cfi_info->block_erase_timeout_max); cfi_info->chip_erase_timeout = (1L << cfi_info->chip_erase_timeout_typ) * - (1L << cfi_info->chip_erase_timeout_max); + (1L << cfi_info->chip_erase_timeout_max); LOG_DEBUG("calculated word write timeout: %u ms, buf write timeout: %u ms, " - "block erase timeout: %u ms, chip erase timeout: %u ms", - cfi_info->word_write_timeout, cfi_info->buf_write_timeout, - cfi_info->block_erase_timeout, cfi_info->chip_erase_timeout); + "block erase timeout: %u ms, chip erase timeout: %u ms", + cfi_info->word_write_timeout, cfi_info->buf_write_timeout, + cfi_info->block_erase_timeout, cfi_info->chip_erase_timeout); /* apply fixups depending on the primary command set */ - switch (cfi_info->pri_id) - { + switch (cfi_info->pri_id) { /* Intel command set (standard and extended) */ case 0x0001: case 0x0003: @@ -2983,14 +2828,12 @@ static int cfi_probe(struct flash_bank *bank) break; } - if ((cfi_info->dev_size * bank->bus_width / bank->chip_width) != bank->size) - { + if ((cfi_info->dev_size * bank->bus_width / bank->chip_width) != bank->size) { LOG_WARNING("configuration specifies 0x%" PRIx32 " size, but a 0x%" PRIx32 - " size flash was found", bank->size, cfi_info->dev_size); + " size flash was found", bank->size, cfi_info->dev_size); } - if (cfi_info->num_erase_regions == 0) - { + if (cfi_info->num_erase_regions == 0) { /* a device might have only one erase block, spanning the whole device */ bank->num_sectors = 1; bank->sectors = malloc(sizeof(struct flash_sector)); @@ -2999,37 +2842,33 @@ static int cfi_probe(struct flash_bank *bank) bank->sectors[sector].size = bank->size; bank->sectors[sector].is_erased = -1; bank->sectors[sector].is_protected = -1; - } - else - { + } else { uint32_t offset = 0; for (i = 0; i < cfi_info->num_erase_regions; i++) - { num_sectors += (cfi_info->erase_region_info[i] & 0xffff) + 1; - } bank->num_sectors = num_sectors; bank->sectors = malloc(sizeof(struct flash_sector) * num_sectors); - for (i = 0; i < cfi_info->num_erase_regions; i++) - { + for (i = 0; i < cfi_info->num_erase_regions; i++) { uint32_t j; - for (j = 0; j < (cfi_info->erase_region_info[i] & 0xffff) + 1; j++) - { + for (j = 0; j < (cfi_info->erase_region_info[i] & 0xffff) + 1; j++) { bank->sectors[sector].offset = offset; - bank->sectors[sector].size = ((cfi_info->erase_region_info[i] >> 16) * 256) - * bank->bus_width / bank->chip_width; + bank->sectors[sector].size = + ((cfi_info->erase_region_info[i] >> 16) * 256) + * bank->bus_width / bank->chip_width; offset += bank->sectors[sector].size; bank->sectors[sector].is_erased = -1; bank->sectors[sector].is_protected = -1; sector++; } } - if (offset != (cfi_info->dev_size * bank->bus_width / bank->chip_width)) - { - LOG_WARNING("CFI size is 0x%" PRIx32 ", but total sector size is 0x%" PRIx32 "", \ - (cfi_info->dev_size * bank->bus_width / bank->chip_width), offset); + if (offset != (cfi_info->dev_size * bank->bus_width / bank->chip_width)) { + LOG_WARNING( + "CFI size is 0x%" PRIx32 ", but total sector size is 0x%" PRIx32 "", \ + (cfi_info->dev_size * bank->bus_width / bank->chip_width), + offset); } } @@ -3057,13 +2896,11 @@ static int cfi_intel_protect_check(struct flash_bank *bank) if (!(pri_ext->blk_status_reg_mask & 0x1)) return ERROR_FLASH_OPERATION_FAILED; - if ((retval = cfi_send_command(bank, 0x90, flash_address(bank, 0, 0x55))) != ERROR_OK) - { + retval = cfi_send_command(bank, 0x90, flash_address(bank, 0, 0x55)); + if (retval != ERROR_OK) return retval; - } - for (i = 0; i < bank->num_sectors; i++) - { + for (i = 0; i < bank->num_sectors; i++) { uint8_t block_status; retval = cfi_get_u8(bank, i, 0x2, &block_status); if (retval != ERROR_OK) @@ -3085,26 +2922,19 @@ static int cfi_spansion_protect_check(struct flash_bank *bank) struct cfi_spansion_pri_ext *pri_ext = cfi_info->pri_ext; int i; - if ((retval = cfi_send_command(bank, 0xaa, - flash_address(bank, 0, pri_ext->_unlock1))) != ERROR_OK) - { + retval = cfi_send_command(bank, 0xaa, flash_address(bank, 0, pri_ext->_unlock1)); + if (retval != ERROR_OK) return retval; - } - if ((retval = cfi_send_command(bank, 0x55, - flash_address(bank, 0, pri_ext->_unlock2))) != ERROR_OK) - { + retval = cfi_send_command(bank, 0x55, flash_address(bank, 0, pri_ext->_unlock2)); + if (retval != ERROR_OK) return retval; - } - if ((retval = cfi_send_command(bank, 0x90, - flash_address(bank, 0, pri_ext->_unlock1))) != ERROR_OK) - { + retval = cfi_send_command(bank, 0x90, flash_address(bank, 0, pri_ext->_unlock1)); + if (retval != ERROR_OK) return retval; - } - for (i = 0; i < bank->num_sectors; i++) - { + for (i = 0; i < bank->num_sectors; i++) { uint8_t block_status; retval = cfi_get_u8(bank, i, 0x2, &block_status); if (retval != ERROR_OK) @@ -3123,8 +2953,7 @@ static int cfi_protect_check(struct flash_bank *bank) { struct cfi_flash_bank *cfi_info = bank->driver_priv; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -3132,8 +2961,7 @@ static int cfi_protect_check(struct flash_bank *bank) if (cfi_info->qry[0] != 'Q') return ERROR_FLASH_BANK_NOT_PROBED; - switch (cfi_info->pri_id) - { + switch (cfi_info->pri_id) { case 1: case 3: return cfi_intel_protect_check(bank); @@ -3154,8 +2982,7 @@ static int get_cfi_info(struct flash_bank *bank, char *buf, int buf_size) int printed; struct cfi_flash_bank *cfi_info = bank->driver_priv; - if (cfi_info->qry[0] == 0xff) - { + if (cfi_info->qry[0] == 0xff) { snprintf(buf, buf_size, "\ncfi flash bank not probed yet\n"); return ERROR_OK; } @@ -3168,7 +2995,7 @@ static int get_cfi_info(struct flash_bank *bank, char *buf, int buf_size) buf_size -= printed; printed = snprintf(buf, buf_size, "mfr: 0x%4.4x, id:0x%4.4x\n\n", - cfi_info->manufacturer, cfi_info->device_id); + cfi_info->manufacturer, cfi_info->device_id); buf += printed; buf_size -= printed; @@ -3199,13 +3026,21 @@ static int get_cfi_info(struct flash_bank *bank, char *buf, int buf_size) buf += printed; buf_size -= printed; - printed = snprintf(buf, buf_size, "max. word write timeout: %u us, " + printed = snprintf(buf, + buf_size, + "max. word write timeout: %u us, " "max. buf write timeout: %u us, max. " "block erase timeout: %u ms, max. chip erase timeout: %u ms\n", - (1 << cfi_info->word_write_timeout_max) * (1 << cfi_info->word_write_timeout_typ), - (1 << cfi_info->buf_write_timeout_max) * (1 << cfi_info->buf_write_timeout_typ), - (1 << cfi_info->block_erase_timeout_max) * (1 << cfi_info->block_erase_timeout_typ), - (1 << cfi_info->chip_erase_timeout_max) * (1 << cfi_info->chip_erase_timeout_typ)); + (1 << + cfi_info->word_write_timeout_max) * (1 << cfi_info->word_write_timeout_typ), + (1 << + cfi_info->buf_write_timeout_max) * (1 << cfi_info->buf_write_timeout_typ), + (1 << + cfi_info->block_erase_timeout_max) * + (1 << cfi_info->block_erase_timeout_typ), + (1 << + cfi_info->chip_erase_timeout_max) * + (1 << cfi_info->chip_erase_timeout_typ)); buf += printed; buf_size -= printed; @@ -3217,18 +3052,17 @@ static int get_cfi_info(struct flash_bank *bank, char *buf, int buf_size) buf += printed; buf_size -= printed; - switch (cfi_info->pri_id) - { - case 1: - case 3: - cfi_intel_info(bank, buf, buf_size); - break; - case 2: - cfi_spansion_info(bank, buf, buf_size); - break; - default: - LOG_ERROR("cfi primary command set %i unsupported", cfi_info->pri_id); - break; + switch (cfi_info->pri_id) { + case 1: + case 3: + cfi_intel_info(bank, buf, buf_size); + break; + case 2: + cfi_spansion_info(bank, buf, buf_size); + break; + default: + LOG_ERROR("cfi primary command set %i unsupported", cfi_info->pri_id); + break; } return ERROR_OK; diff --git a/src/flash/nor/cfi.h b/src/flash/nor/cfi.h index a57b0ddc..04153b68 100644 --- a/src/flash/nor/cfi.h +++ b/src/flash/nor/cfi.h @@ -17,14 +17,14 @@ * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ + #ifndef CFI_H #define CFI_H #define CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7 0xE0 /* DQ5..DQ7 */ #define CFI_STATUS_POLL_MASK_DQ6_DQ7 0xC0 /* DQ6..DQ7 */ -struct cfi_flash_bank -{ +struct cfi_flash_bank { struct working_area *write_algorithm; int x16_as_x8; @@ -80,8 +80,7 @@ struct cfi_flash_bank * as defined for the Advanced+ Boot Block Flash Memory (C3) * and used by the linux kernel cfi driver (as of 2.6.14) */ -struct cfi_intel_pri_ext -{ +struct cfi_intel_pri_ext { uint8_t pri[3]; uint8_t major_version; uint8_t minor_version; @@ -100,8 +99,7 @@ struct cfi_intel_pri_ext /* Spansion primary extended query table as defined for and used by * the linux kernel cfi driver (as of 2.6.15) */ -struct cfi_spansion_pri_ext -{ +struct cfi_spansion_pri_ext { uint8_t pri[3]; uint8_t major_version; uint8_t minor_version; @@ -124,8 +122,7 @@ struct cfi_spansion_pri_ext /* Atmel primary extended query table as defined for and used by * the linux kernel cfi driver (as of 2.6.20+) */ -struct cfi_atmel_pri_ext -{ +struct cfi_atmel_pri_ext { uint8_t pri[3]; uint8_t major_version; uint8_t minor_version; @@ -140,14 +137,12 @@ enum { CFI_UNLOCK_5555_2AAA, }; -struct cfi_unlock_addresses -{ +struct cfi_unlock_addresses { uint32_t unlock1; uint32_t unlock2; }; -struct cfi_fixup -{ +struct cfi_fixup { uint16_t mfr; uint16_t id; void (*fixup)(struct flash_bank *bank, void *param); diff --git a/src/flash/nor/core.c b/src/flash/nor/core.c index 7f40bbff..ce3ab482 100644 --- a/src/flash/nor/core.c +++ b/src/flash/nor/core.c @@ -29,7 +29,6 @@ #include #include - /** * @file * Upper level of NOR flash framework. @@ -45,9 +44,7 @@ int flash_driver_erase(struct flash_bank *bank, int first, int last) retval = bank->driver->erase(bank, first, last); if (retval != ERROR_OK) - { LOG_ERROR("failed erasing sectors %d to %d", first, last); - } return retval; } @@ -57,8 +54,7 @@ int flash_driver_protect(struct flash_bank *bank, int set, int first, int last) int retval; /* callers may not supply illegal parameters ... */ - if (first < 0 || first > last || last >= bank->num_sectors) - { + if (first < 0 || first > last || last >= bank->num_sectors) { LOG_ERROR("illegal sector range"); return ERROR_FAIL; } @@ -79,47 +75,47 @@ int flash_driver_protect(struct flash_bank *bank, int set, int first, int last) */ retval = bank->driver->protect(bank, set, first, last); if (retval != ERROR_OK) - { LOG_ERROR("failed setting protection for areas %d to %d", first, last); - } return retval; } int flash_driver_write(struct flash_bank *bank, - uint8_t *buffer, uint32_t offset, uint32_t count) + uint8_t *buffer, uint32_t offset, uint32_t count) { int retval; retval = bank->driver->write(bank, buffer, offset, count); - if (retval != ERROR_OK) - { - LOG_ERROR("error writing to flash at address 0x%08" PRIx32 " at offset 0x%8.8" PRIx32, - bank->base, offset); + if (retval != ERROR_OK) { + LOG_ERROR( + "error writing to flash at address 0x%08" PRIx32 " at offset 0x%8.8" PRIx32, + bank->base, + offset); } return retval; } int flash_driver_read(struct flash_bank *bank, - uint8_t *buffer, uint32_t offset, uint32_t count) + uint8_t *buffer, uint32_t offset, uint32_t count) { int retval; LOG_DEBUG("call flash_driver_read()"); retval = bank->driver->read(bank, buffer, offset, count); - if (retval != ERROR_OK) - { - LOG_ERROR("error reading to flash at address 0x%08" PRIx32 " at offset 0x%8.8" PRIx32, - bank->base, offset); + if (retval != ERROR_OK) { + LOG_ERROR( + "error reading to flash at address 0x%08" PRIx32 " at offset 0x%8.8" PRIx32, + bank->base, + offset); } return retval; } int default_flash_read(struct flash_bank *bank, - uint8_t *buffer, uint32_t offset, uint32_t count) + uint8_t *buffer, uint32_t offset, uint32_t count) { return target_read_buffer(bank->target, offset + bank->base, count, buffer); } @@ -128,19 +124,16 @@ void flash_bank_add(struct flash_bank *bank) { /* put flash bank in linked list */ unsigned bank_num = 0; - if (flash_banks) - { + if (flash_banks) { /* find last flash bank */ struct flash_bank *p = flash_banks; - while (NULL != p->next) - { + while (NULL != p->next) { bank_num += 1; p = p->next; } p->next = bank; bank_num += 1; - } - else + } else flash_banks = bank; bank->bank_number = bank_num; @@ -156,12 +149,9 @@ struct flash_bank *get_flash_bank_by_num_noprobe(int num) struct flash_bank *p; int i = 0; - for (p = flash_banks; p; p = p->next) - { + for (p = flash_banks; p; p = p->next) { if (i++ == num) - { return p; - } } LOG_ERROR("flash bank %d does not exist", num); return NULL; @@ -172,9 +162,7 @@ int flash_get_bank_count(void) struct flash_bank *p; int i = 0; for (p = flash_banks; p; p = p->next) - { i++; - } return i; } @@ -184,8 +172,7 @@ struct flash_bank *get_flash_bank_by_name_noprobe(const char *name) unsigned found = 0; struct flash_bank *bank; - for (bank = flash_banks; NULL != bank; bank = bank->next) - { + for (bank = flash_banks; NULL != bank; bank = bank->next) { if (strcmp(bank->name, name) == 0) return bank; if (!flash_driver_name_matches(bank->driver->name, name)) @@ -203,12 +190,10 @@ int get_flash_bank_by_name(const char *name, struct flash_bank **bank_result) int retval; bank = get_flash_bank_by_name_noprobe(name); - if (bank != NULL) - { + if (bank != NULL) { retval = bank->driver->auto_probe(bank); - if (retval != ERROR_OK) - { + if (retval != ERROR_OK) { LOG_ERROR("auto_probe failed"); return retval; } @@ -224,14 +209,11 @@ int get_flash_bank_by_num(int num, struct flash_bank **bank) int retval; if (p == NULL) - { return ERROR_FAIL; - } retval = p->driver->auto_probe(p); - if (retval != ERROR_OK) - { + if (retval != ERROR_OK) { LOG_ERROR("auto_probe failed"); return retval; } @@ -241,31 +223,30 @@ int get_flash_bank_by_num(int num, struct flash_bank **bank) /* lookup flash bank by address, bank not found is success, but * result_bank is set to NULL. */ -int get_flash_bank_by_addr(struct target *target, uint32_t addr, bool check, struct flash_bank **result_bank) +int get_flash_bank_by_addr(struct target *target, + uint32_t addr, + bool check, + struct flash_bank **result_bank) { struct flash_bank *c; /* cycle through bank list */ - for (c = flash_banks; c; c = c->next) - { + for (c = flash_banks; c; c = c->next) { int retval; retval = c->driver->auto_probe(c); - if (retval != ERROR_OK) - { + if (retval != ERROR_OK) { LOG_ERROR("auto_probe failed"); return retval; } /* check whether address belongs to this flash bank */ - if ((addr >= c->base) && (addr <= c->base + (c->size - 1)) && target == c->target) - { + if ((addr >= c->base) && (addr <= c->base + (c->size - 1)) && target == c->target) { *result_bank = c; return ERROR_OK; } } *result_bank = NULL; - if (check) - { + if (check) { LOG_ERROR("No flash at address 0x%08" PRIx32, addr); return ERROR_FAIL; } @@ -280,38 +261,33 @@ int default_flash_mem_blank_check(struct flash_bank *bank) uint32_t nBytes; int retval = ERROR_OK; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } uint8_t *buffer = malloc(buffer_size); - for (i = 0; i < bank->num_sectors; i++) - { + for (i = 0; i < bank->num_sectors; i++) { uint32_t j; bank->sectors[i].is_erased = 1; - for (j = 0; j < bank->sectors[i].size; j += buffer_size) - { + for (j = 0; j < bank->sectors[i].size; j += buffer_size) { uint32_t chunk; chunk = buffer_size; if (chunk > (j - bank->sectors[i].size)) - { chunk = (j - bank->sectors[i].size); - } - retval = target_read_memory(target, bank->base + bank->sectors[i].offset + j, 4, chunk/4, buffer); + retval = target_read_memory(target, + bank->base + bank->sectors[i].offset + j, + 4, + chunk/4, + buffer); if (retval != ERROR_OK) - { goto done; - } - for (nBytes = 0; nBytes < chunk; nBytes++) - { - if (buffer[nBytes] != 0xFF) - { + for (nBytes = 0; nBytes < chunk; nBytes++) { + if (buffer[nBytes] != 0xFF) { bank->sectors[i].is_erased = 0; break; } @@ -319,7 +295,7 @@ int default_flash_mem_blank_check(struct flash_bank *bank) } } - done: +done: free(buffer); return retval; @@ -333,20 +309,17 @@ int default_flash_blank_check(struct flash_bank *bank) int fast_check = 0; uint32_t blank; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - for (i = 0; i < bank->num_sectors; i++) - { + for (i = 0; i < bank->num_sectors; i++) { uint32_t address = bank->base + bank->sectors[i].offset; uint32_t size = bank->sectors[i].size; retval = target_blank_check_memory(target, address, size, &blank); - if (retval != ERROR_OK) - { + if (retval != ERROR_OK) { fast_check = 0; break; } @@ -357,8 +330,7 @@ int default_flash_blank_check(struct flash_bank *bank) fast_check = 1; } - if (!fast_check) - { + if (!fast_check) { LOG_USER("Running slow fallback erase check - add working memory"); return default_flash_mem_blank_check(bank); } @@ -381,8 +353,8 @@ int default_flash_blank_check(struct flash_bank *bank) * warning about those additions. */ static int flash_iterate_address_range_inner(struct target *target, - char *pad_reason, uint32_t addr, uint32_t length, - int (*callback)(struct flash_bank *bank, int first, int last)) + char *pad_reason, uint32_t addr, uint32_t length, + int (*callback)(struct flash_bank *bank, int first, int last)) { struct flash_bank *c; uint32_t last_addr = addr + length; /* first address AFTER end */ @@ -394,17 +366,14 @@ static int flash_iterate_address_range_inner(struct target *target, if (retval != ERROR_OK) return retval; - if (c->size == 0 || c->num_sectors == 0) - { + if (c->size == 0 || c->num_sectors == 0) { LOG_ERROR("Bank is invalid"); return ERROR_FLASH_BANK_INVALID; } - if (length == 0) - { + if (length == 0) { /* special case, erase whole bank when length is zero */ - if (addr != c->base) - { + if (addr != c->base) { LOG_ERROR("Whole bank access must start at beginning of bank."); return ERROR_FLASH_DST_BREAKS_ALIGNMENT; } @@ -413,8 +382,7 @@ static int flash_iterate_address_range_inner(struct target *target, } /* check whether it all fits in this bank */ - if (addr + length - 1 > c->base + c->size - 1) - { + if (addr + length - 1 > c->base + c->size - 1) { LOG_ERROR("Flash access does not fit into bank."); return ERROR_FLASH_DST_BREAKS_ALIGNMENT; } @@ -424,8 +392,7 @@ static int flash_iterate_address_range_inner(struct target *target, addr -= c->base; last_addr -= c->base; - for (i = 0; i < c->num_sectors; i++) - { + for (i = 0; i < c->num_sectors; i++) { struct flash_sector *f = c->sectors + i; uint32_t end = f->offset + f->size; @@ -449,7 +416,7 @@ static int flash_iterate_address_range_inner(struct target *target, else if (addr < end && pad_reason) { /* FIXME say how many bytes (e.g. 80 KB) */ LOG_WARNING("Adding extra %s range, " - "%#8.8x to %#8.8x", + "%#8.8x to %#8.8x", pad_reason, (unsigned) f->offset, (unsigned) addr - 1); @@ -470,7 +437,7 @@ static int flash_iterate_address_range_inner(struct target *target, if (last_addr < end && pad_reason) { /* FIXME say how many bytes (e.g. 80 KB) */ LOG_WARNING("Adding extra %s range, " - "%#8.8x to %#8.8x", + "%#8.8x to %#8.8x", pad_reason, (unsigned) last_addr, (unsigned) end - 1); @@ -486,9 +453,9 @@ static int flash_iterate_address_range_inner(struct target *target, /* invalid start or end address? */ if (first == -1 || last == -1) { LOG_ERROR("address range 0x%8.8x .. 0x%8.8x " - "is not sector-aligned", - (unsigned) (c->base + addr), - (unsigned) (c->base + last_addr - 1)); + "is not sector-aligned", + (unsigned) (c->base + addr), + (unsigned) (c->base + last_addr - 1)); return ERROR_FLASH_DST_BREAKS_ALIGNMENT; } @@ -503,23 +470,21 @@ static int flash_iterate_address_range_inner(struct target *target, * multiple chips. */ static int flash_iterate_address_range(struct target *target, - char *pad_reason, uint32_t addr, uint32_t length, - int (*callback)(struct flash_bank *bank, int first, int last)) + char *pad_reason, uint32_t addr, uint32_t length, + int (*callback)(struct flash_bank *bank, int first, int last)) { struct flash_bank *c; int retval = ERROR_OK; /* Danger! zero-length iterations means entire bank! */ - do - { + do { retval = get_flash_bank_by_addr(target, addr, true, &c); if (retval != ERROR_OK) return retval; uint32_t cur_length = length; /* check whether it all fits in this bank */ - if (addr + length - 1 > c->base + c->size - 1) - { + if (addr + length - 1 > c->base + c->size - 1) { LOG_DEBUG("iterating over more than one flash bank."); cur_length = c->base + c->size - addr; } @@ -537,10 +502,10 @@ static int flash_iterate_address_range(struct target *target, } int flash_erase_address_range(struct target *target, - bool pad, uint32_t addr, uint32_t length) + bool pad, uint32_t addr, uint32_t length) { return flash_iterate_address_range(target, pad ? "erase" : NULL, - addr, length, &flash_driver_erase); + addr, length, &flash_driver_erase); } static int flash_driver_unprotect(struct flash_bank *bank, int first, int last) @@ -555,30 +520,25 @@ int flash_unlock_address_range(struct target *target, uint32_t addr, uint32_t le * and doesn't restore it. */ return flash_iterate_address_range(target, "unprotect", - addr, length, &flash_driver_unprotect); + addr, length, &flash_driver_unprotect); } -static int compare_section (const void * a, const void * b) +static int compare_section(const void *a, const void *b) { struct imagesection *b1, *b2; - b1=*((struct imagesection **)a); - b2=*((struct imagesection **)b); + b1 = *((struct imagesection **)a); + b2 = *((struct imagesection **)b); if (b1->base_address == b2->base_address) - { return 0; - } else if (b1->base_address > b2->base_address) - { + else if (b1->base_address > b2->base_address) return 1; - } else - { + else return -1; - } } - int flash_write_unlock(struct target *target, struct image *image, - uint32_t *written, int erase, bool unlock) + uint32_t *written, int erase, bool unlock) { int retval = ERROR_OK; @@ -593,8 +553,7 @@ int flash_write_unlock(struct target *target, struct image *image, if (written) *written = 0; - if (erase) - { + if (erase) { /* assume all sectors need erasing - stops any problems * when flash_write is called multiple times */ @@ -610,16 +569,13 @@ int flash_write_unlock(struct target *target, struct image *image, image->num_sections); int i; for (i = 0; i < image->num_sections; i++) - { sections[i] = &image->sections[i]; - } qsort(sections, image->num_sections, sizeof(struct imagesection *), - compare_section); + compare_section); /* loop until we reach end of the image */ - while (section < image->num_sections) - { + while (section < image->num_sections) { uint32_t buffer_size; uint8_t *buffer; int section_last; @@ -627,8 +583,7 @@ int flash_write_unlock(struct target *target, struct image *image, uint32_t run_size = sections[section]->size - section_offset; int pad_bytes = 0; - if (sections[section]->size == 0) - { + if (sections[section]->size == 0) { LOG_WARNING("empty section %d", section); section++; section_offset = 0; @@ -638,12 +593,9 @@ int flash_write_unlock(struct target *target, struct image *image, /* find the corresponding flash bank */ retval = get_flash_bank_by_addr(target, run_address, false, &c); if (retval != ERROR_OK) - { goto done; - } - if (c == NULL) - { - section++; /* and skip it */ + if (c == NULL) { + section++; /* and skip it */ section_offset = 0; continue; } @@ -651,15 +603,13 @@ int flash_write_unlock(struct target *target, struct image *image, /* collect consecutive sections which fall into the same bank */ section_last = section; padding[section] = 0; - while ((run_address + run_size - 1 < c->base + c->size - 1) - && (section_last + 1 < image->num_sections)) - { + while ((run_address + run_size - 1 < c->base + c->size - 1) && + (section_last + 1 < image->num_sections)) { /* sections are sorted */ assert(sections[section_last + 1]->base_address >= c->base); - if (sections[section_last + 1]->base_address >= (c->base + c->size)) - { - /* Done with this bank */ - break; + if (sections[section_last + 1]->base_address >= (c->base + c->size)) { + /* Done with this bank */ + break; } /* FIXME This needlessly touches sectors BETWEEN the @@ -685,11 +635,12 @@ int flash_write_unlock(struct target *target, struct image *image, run_size += pad_bytes; if (pad_bytes > 0) - LOG_INFO("Padding image section %d with %d bytes", section_last-1, pad_bytes); + LOG_INFO("Padding image section %d with %d bytes", + section_last-1, + pad_bytes); } - if (run_address + run_size - 1 > c->base + c->size - 1) - { + if (run_address + run_size - 1 > c->base + c->size - 1) { /* If we have more than one flash chip back to back, then we limit * the current write operation to the current chip. */ @@ -710,7 +661,7 @@ int flash_write_unlock(struct target *target, struct image *image, for (sector = 0; sector < c->num_sectors; sector++) { end = c->sectors[sector].offset - + c->sectors[sector].size; + + c->sectors[sector].size; if (offset_end <= end) break; } @@ -722,8 +673,7 @@ int flash_write_unlock(struct target *target, struct image *image, /* allocate buffer */ buffer = malloc(run_size); - if (buffer == NULL) - { + if (buffer == NULL) { LOG_ERROR("Out of memory for flash bank buffer"); retval = ERROR_FAIL; goto done; @@ -731,13 +681,12 @@ int flash_write_unlock(struct target *target, struct image *image, buffer_size = 0; /* read sections to the buffer */ - while (buffer_size < run_size) - { + while (buffer_size < run_size) { size_t size_read; size_read = run_size - buffer_size; if (size_read > sections[section]->size - section_offset) - size_read = sections[section]->size - section_offset; + size_read = sections[section]->size - section_offset; /* KLUDGE! * @@ -747,25 +696,25 @@ int flash_write_unlock(struct target *target, struct image *image, intptr_t diff = (intptr_t)sections[section] - (intptr_t)image->sections; int t_section_num = diff / sizeof(struct imagesection); - LOG_DEBUG("image_read_section: section = %d, t_section_num = %d, section_offset = %d, buffer_size = %d, size_read = %d", - (int)section, -(int)t_section_num, (int)section_offset, (int)buffer_size, (int)size_read); - if ((retval = image_read_section(image, t_section_num, section_offset, - size_read, buffer + buffer_size, &size_read)) != ERROR_OK || size_read == 0) - { + LOG_DEBUG("image_read_section: section = %d, t_section_num = %d, " + "section_offset = %d, buffer_size = %d, size_read = %d", + (int)section, (int)t_section_num, (int)section_offset, + (int)buffer_size, (int)size_read); + retval = image_read_section(image, t_section_num, section_offset, + size_read, buffer + buffer_size, &size_read); + if (retval != ERROR_OK || size_read == 0) { free(buffer); goto done; } /* see if we need to pad the section */ while (padding[section]--) - (buffer + buffer_size)[size_read++] = 0xff; + (buffer + buffer_size)[size_read++] = 0xff; buffer_size += size_read; section_offset += size_read; - if (section_offset >= sections[section]->size) - { + if (section_offset >= sections[section]->size) { section++; section_offset = 0; } @@ -774,38 +723,31 @@ int flash_write_unlock(struct target *target, struct image *image, retval = ERROR_OK; if (unlock) - { retval = flash_unlock_address_range(target, run_address, run_size); - } - if (retval == ERROR_OK) - { - if (erase) - { + if (retval == ERROR_OK) { + if (erase) { /* calculate and erase sectors */ retval = flash_erase_address_range(target, true, run_address, run_size); } } - if (retval == ERROR_OK) - { + if (retval == ERROR_OK) { /* write flash sectors */ retval = flash_driver_write(c, buffer, run_address - c->base, run_size); } free(buffer); - if (retval != ERROR_OK) - { + if (retval != ERROR_OK) { /* abort operation */ goto done; } if (written != NULL) - *written += run_size; /* add run size to total written counter */ + *written += run_size; /* add run size to total written counter */ } - done: free(sections); free(padding); @@ -814,7 +756,7 @@ done: } int flash_write(struct target *target, struct image *image, - uint32_t *written, int erase) + uint32_t *written, int erase) { return flash_write_unlock(target, image, written, erase, false); } diff --git a/src/flash/nor/core.h b/src/flash/nor/core.h index 8f7dce88..90f4e614 100644 --- a/src/flash/nor/core.h +++ b/src/flash/nor/core.h @@ -20,6 +20,7 @@ * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ + #ifndef FLASH_NOR_CORE_H #define FLASH_NOR_CORE_H @@ -39,11 +40,10 @@ struct image; * within a flash bank. A single bank typically consists of multiple * sectors, each of which can be erased and protected independently. */ -struct flash_sector -{ - /// Bus offset from start of the flash chip (in bytes). +struct flash_sector { + /** Bus offset from start of the flash chip (in bytes). */ uint32_t offset; - /// Number of bytes in this flash sector. + /** Number of bytes in this flash sector. */ uint32_t size; /** * Indication of erasure status: 0 = not erased, 1 = erased, @@ -72,8 +72,7 @@ struct flash_sector * may use the @c driver_priv member to store additional data on a * per-bank basis, if required. */ -struct flash_bank -{ +struct flash_bank { const char *name; struct target *target; /**< Target to which this bank belongs. */ @@ -94,13 +93,13 @@ struct flash_bank * some non-zero value during "probe()" or "auto_probe()". */ int num_sectors; - /// Array of sectors, allocated and initilized by the flash driver + /** Array of sectors, allocated and initilized by the flash driver */ struct flash_sector *sectors; struct flash_bank *next; /**< The next flash bank on this chip */ }; -/// Registers the 'flash' subsystem commands +/** Registers the 'flash' subsystem commands */ int flash_register_commands(struct command_context *cmd_ctx); /** @@ -134,7 +133,7 @@ int flash_write(struct target *target, * This routine must be called when the system may modify the status. */ void flash_set_dirty(void); -/// @returns The number of flash banks currently defined. +/** @returns The number of flash banks currently defined. */ int flash_get_bank_count(void); /** * Provides default read implementation for flash memory. @@ -209,6 +208,7 @@ struct flash_bank *get_flash_bank_by_num_noprobe(int num); * @param check return ERROR_OK and result_bank NULL if the bank does not exist * @returns The struct flash_bank located at @a addr, or NULL. */ -int get_flash_bank_by_addr(struct target *target, uint32_t addr, bool check, struct flash_bank **result_bank); +int get_flash_bank_by_addr(struct target *target, uint32_t addr, bool check, + struct flash_bank **result_bank); -#endif // FLASH_NOR_CORE_H +#endif /* FLASH_NOR_CORE_H */ diff --git a/src/flash/nor/driver.h b/src/flash/nor/driver.h index 3b8e31a0..466417ad 100644 --- a/src/flash/nor/driver.h +++ b/src/flash/nor/driver.h @@ -20,6 +20,7 @@ * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ + #ifndef FLASH_NOR_DRIVER_H #define FLASH_NOR_DRIVER_H @@ -48,8 +49,7 @@ struct flash_bank; * corresponding static flash_driver_callback() * routine in flash.c. */ -struct flash_driver -{ +struct flash_driver { /** * Gives a human-readable name of this flash driver, * This field is used to select and initialize the driver. @@ -213,7 +213,8 @@ struct flash_driver int (*auto_probe)(struct flash_bank *bank); }; -#define FLASH_BANK_COMMAND_HANDLER(name) static __FLASH_BANK_COMMAND(name) +#define FLASH_BANK_COMMAND_HANDLER(name) \ + static __FLASH_BANK_COMMAND(name) /** * Find a NOR flash driver by its name. @@ -222,4 +223,4 @@ struct flash_driver */ struct flash_driver *flash_driver_find_by_name(const char *name); -#endif // FLASH_NOR_DRIVER_H +#endif /* FLASH_NOR_DRIVER_H */ diff --git a/src/flash/nor/drivers.c b/src/flash/nor/drivers.c index 6b0cc369..06de0c66 100644 --- a/src/flash/nor/drivers.c +++ b/src/flash/nor/drivers.c @@ -16,6 +16,7 @@ * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ + #ifdef HAVE_CONFIG_H #include "config.h" #endif @@ -84,8 +85,7 @@ static struct flash_driver *flash_drivers[] = { struct flash_driver *flash_driver_find_by_name(const char *name) { - for (unsigned i = 0; flash_drivers[i]; i++) - { + for (unsigned i = 0; flash_drivers[i]; i++) { if (strcmp(name, flash_drivers[i]->name) == 0) return flash_drivers[i]; } diff --git a/src/flash/nor/dsp5680xx_flash.c b/src/flash/nor/dsp5680xx_flash.c index 78cd6e3d..eb2f3e1b 100644 --- a/src/flash/nor/dsp5680xx_flash.c +++ b/src/flash/nor/dsp5680xx_flash.c @@ -27,12 +27,12 @@ * @file dsp5680xx_flash.c * @author Rodrigo L. Rosa * @date Thu Jun 9 18:21:58 2011 - * + * * @brief This file implements the basic functions to run flashing commands * from the TCL interface. * It allows the user to flash the Freescale 5680xx DSP. - * - * + * + * */ #ifdef HAVE_CONFIG_H @@ -84,14 +84,14 @@ FLASH_BANK_COMMAND_HANDLER(dsp5680xx_flash_bank_command) return ERROR_OK; } -/** +/** * A memory mapped register (PROT) holds information regarding sector protection. * Protection refers to undesired core access. * The value in this register is loaded from flash upon reset. - * - * @param bank - * - * @return + * + * @param bank + * + * @return */ static int dsp5680xx_flash_protect_check(struct flash_bank *bank) { @@ -118,17 +118,18 @@ static int dsp5680xx_flash_protect_check(struct flash_bank *bank) return retval; } -/** +/** * Protection funcionality is not implemented. * The current implementation applies/removes security on the chip. - * The chip is effectively secured/unsecured after the first reset following the execution of this function. - * - * @param bank + * The chip is effectively secured/unsecured after the first reset + * following the execution of this function. + * + * @param bank * @param set Apply or remove security on the chip. * @param first This parameter is ignored. * @param last This parameter is ignored. - * - * @return + * + * @return */ static int dsp5680xx_flash_protect(struct flash_bank *bank, int set, int first, int last) @@ -153,15 +154,16 @@ static int dsp5680xx_flash_protect(struct flash_bank *bank, int set, int first, return retval; } -/** - * The dsp5680xx use word addressing. The "/2" that appear in the following code are a workaround for the fact that OpenOCD uses byte addressing. - * - * @param bank +/** + * The dsp5680xx use word addressing. The "/2" that appear in the following code + * are a workaround for the fact that OpenOCD uses byte addressing. + * + * @param bank * @param buffer Data to write to flash. - * @param offset + * @param offset * @param count In bytes (2 bytes per address). - * - * @return + * + * @return */ static int dsp5680xx_flash_write(struct flash_bank *bank, uint8_t * buffer, uint32_t offset, uint32_t count) @@ -178,24 +180,18 @@ static int dsp5680xx_flash_write(struct flash_bank *bank, uint8_t * buffer, * This chip uses word addressing, Openocd only supports byte addressing. * The workaround results in disabling writing to odd byte addresses */ - LOG_ERROR - ("%s: Writing to odd addresses not supported for this target", - __func__); + LOG_ERROR("%s: Writing to odd addresses not supported for this target", __func__); return ERROR_FAIL; } - retval = - dsp5680xx_f_wr(bank->target, buffer, bank->base + offset / 2, count, - 0); + retval = dsp5680xx_f_wr(bank->target, buffer, bank->base + offset / 2, count, 0); uint32_t addr_word; for (addr_word = bank->base + offset / 2; addr_word < count / 2; - addr_word += (HFM_SECTOR_SIZE / 2)) { + addr_word += (HFM_SECTOR_SIZE / 2)) { if (retval == ERROR_OK) - bank->sectors[addr_word / - (HFM_SECTOR_SIZE / 2)].is_erased = 0; + bank->sectors[addr_word / (HFM_SECTOR_SIZE / 2)].is_erased = 0; else - bank->sectors[addr_word / - (HFM_SECTOR_SIZE / 2)].is_erased = -1; + bank->sectors[addr_word / (HFM_SECTOR_SIZE / 2)].is_erased = -1; } return retval; } @@ -207,31 +203,32 @@ static int dsp5680xx_probe(struct flash_bank *bank) } static int dsp5680xx_flash_info(struct flash_bank *bank, char *buf, - int buf_size) + int buf_size) { snprintf(buf, buf_size, "\ndsp5680xx flash driver info:\n - See comments in code."); return ERROR_OK; } -/** - * The flash module (FM) on the dsp5680xx supports both individual sector and mass erase of the flash memory. - * If this function is called with @first == @last == 0 or if @first is the first sector (#0) and @last is the last sector then the mass erase command is executed (much faster than erasing each sector individually). - * - * @param bank - * @param first - * @param last - * - * @return +/** + * The flash module (FM) on the dsp5680xx supports both individual sector + * and mass erase of the flash memory. + * If this function is called with @first == @last == 0 or if @first is the + * first sector (#0) and @last is the last sector then the mass erase command + * is executed (much faster than erasing each sector individually). + * + * @param bank + * @param first + * @param last + * + * @return */ static int dsp5680xx_flash_erase(struct flash_bank *bank, int first, int last) { int retval; - retval = - dsp5680xx_f_erase(bank->target, (uint32_t) first, (uint32_t) last); - if ((!(first | last)) - || ((first == 0) && (last == (HFM_SECTOR_COUNT - 1)))) + retval = dsp5680xx_f_erase(bank->target, (uint32_t) first, (uint32_t) last); + if ((!(first | last)) || ((first == 0) && (last == (HFM_SECTOR_COUNT - 1)))) last = HFM_SECTOR_COUNT - 1; if (retval == ERROR_OK) for (int i = first; i <= last; i++) @@ -246,13 +243,13 @@ static int dsp5680xx_flash_erase(struct flash_bank *bank, int first, int last) return retval; } -/** +/** * The flash module (FM) on the dsp5680xx support a blank check function. * This function executes the FM's blank check functionality on each and every sector. - * - * @param bank - * - * @return + * + * @param bank + * + * @return */ static int dsp5680xx_flash_erase_check(struct flash_bank *bank) { @@ -264,8 +261,7 @@ static int dsp5680xx_flash_erase_check(struct flash_bank *bank) for (i = 0; i < HFM_SECTOR_COUNT; i++) { if (bank->sectors[i].is_erased == -1) { - retval = - dsp5680xx_f_erase_check(bank->target, &erased, i); + retval = dsp5680xx_f_erase_check(bank->target, &erased, i); if (retval != ERROR_OK) { bank->sectors[i].is_erased = -1; } else { diff --git a/src/flash/nor/ecos.c b/src/flash/nor/ecos.c index cae89358..c7458596 100644 --- a/src/flash/nor/ecos.c +++ b/src/flash/nor/ecos.c @@ -17,6 +17,7 @@ * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ + #ifdef HAVE_CONFIG_H #include "config.h" #endif @@ -26,16 +27,15 @@ #include #include - #if 0 static uint32_t ecosflash_get_flash_status(struct flash_bank *bank); -static void ecosflash_set_flash_mode(struct flash_bank *bank,int mode); +static void ecosflash_set_flash_mode(struct flash_bank *bank, int mode); static uint32_t ecosflash_wait_status_busy(struct flash_bank *bank, uint32_t waitbits, int timeout); -static int ecosflash_handle_gpnvm_command(struct command_context *cmd_ctx, char *cmd, char **args, int argc); +static int ecosflash_handle_gpnvm_command(struct command_context *cmd_ctx, + char *cmd, char **args, int argc); #endif -struct ecosflash_flash_bank -{ +struct ecosflash_flash_bank { struct target *target; struct working_area *write_algorithm; struct working_area *erase_check_algorithm; @@ -45,60 +45,58 @@ struct ecosflash_flash_bank static const int sectorSize = 0x10000; -char * -flash_errmsg(int err); +char *flash_errmsg(int err); #ifndef __ECOS -#define FLASH_ERR_OK 0x00 /* No error - operation complete */ -#define FLASH_ERR_INVALID 0x01 /* Invalid FLASH address */ -#define FLASH_ERR_ERASE 0x02 /* Error trying to erase */ -#define FLASH_ERR_LOCK 0x03 /* Error trying to lock/unlock */ -#define FLASH_ERR_PROGRAM 0x04 /* Error trying to program */ -#define FLASH_ERR_PROTOCOL 0x05 /* Generic error */ -#define FLASH_ERR_PROTECT 0x06 /* Device/region is write-protected */ -#define FLASH_ERR_NOT_INIT 0x07 /* FLASH info not yet initialized */ -#define FLASH_ERR_HWR 0x08 /* Hardware (configuration?) problem */ -#define FLASH_ERR_ERASE_SUSPEND 0x09 /* Device is in erase suspend mode */ -#define FLASH_ERR_PROGRAM_SUSPEND 0x0a /* Device is in in program suspend mode */ -#define FLASH_ERR_DRV_VERIFY 0x0b /* Driver failed to verify data */ -#define FLASH_ERR_DRV_TIMEOUT 0x0c /* Driver timed out waiting for device */ -#define FLASH_ERR_DRV_WRONG_PART 0x0d /* Driver does not support device */ -#define FLASH_ERR_LOW_VOLTAGE 0x0e /* Not enough juice to complete job */ - -char * -flash_errmsg(int err) +#define FLASH_ERR_OK 0x00 /* No error - operation complete */ +#define FLASH_ERR_INVALID 0x01 /* Invalid FLASH address */ +#define FLASH_ERR_ERASE 0x02 /* Error trying to erase */ +#define FLASH_ERR_LOCK 0x03 /* Error trying to lock/unlock */ +#define FLASH_ERR_PROGRAM 0x04 /* Error trying to program */ +#define FLASH_ERR_PROTOCOL 0x05 /* Generic error */ +#define FLASH_ERR_PROTECT 0x06 /* Device/region is write-protected */ +#define FLASH_ERR_NOT_INIT 0x07 /* FLASH info not yet initialized */ +#define FLASH_ERR_HWR 0x08 /* Hardware (configuration?) problem */ +#define FLASH_ERR_ERASE_SUSPEND 0x09 /* Device is in erase suspend mode */ +#define FLASH_ERR_PROGRAM_SUSPEND 0x0a /* Device is in in program suspend mode */ +#define FLASH_ERR_DRV_VERIFY 0x0b /* Driver failed to verify data */ +#define FLASH_ERR_DRV_TIMEOUT 0x0c /* Driver timed out waiting for device */ +#define FLASH_ERR_DRV_WRONG_PART 0x0d /* Driver does not support device */ +#define FLASH_ERR_LOW_VOLTAGE 0x0e /* Not enough juice to complete job */ + +char *flash_errmsg(int err) { switch (err) { - case FLASH_ERR_OK: - return "No error - operation complete"; - case FLASH_ERR_ERASE_SUSPEND: - return "Device is in erase suspend state"; - case FLASH_ERR_PROGRAM_SUSPEND: - return "Device is in program suspend state"; - case FLASH_ERR_INVALID: - return "Invalid FLASH address"; - case FLASH_ERR_ERASE: - return "Error trying to erase"; - case FLASH_ERR_LOCK: - return "Error trying to lock/unlock"; - case FLASH_ERR_PROGRAM: - return "Error trying to program"; - case FLASH_ERR_PROTOCOL: - return "Generic error"; - case FLASH_ERR_PROTECT: - return "Device/region is write-protected"; - case FLASH_ERR_NOT_INIT: - return "FLASH sub-system not initialized"; - case FLASH_ERR_DRV_VERIFY: - return "Data verify failed after operation"; - case FLASH_ERR_DRV_TIMEOUT: - return "Driver timed out waiting for device"; - case FLASH_ERR_DRV_WRONG_PART: - return "Driver does not support device"; - case FLASH_ERR_LOW_VOLTAGE: - return "Device reports low voltage"; - default: - return "Unknown error"; + case FLASH_ERR_OK: + return "No error - operation complete"; + case FLASH_ERR_ERASE_SUSPEND: + return "Device is in erase suspend state"; + case FLASH_ERR_PROGRAM_SUSPEND: + return "Device is in program suspend state"; + case FLASH_ERR_INVALID: + return "Invalid FLASH address"; + case FLASH_ERR_ERASE: + return "Error trying to erase"; + case FLASH_ERR_LOCK: + return "Error trying to lock/unlock"; + case FLASH_ERR_PROGRAM: + return "Error trying to program"; + case FLASH_ERR_PROTOCOL: + return "Generic error"; + case FLASH_ERR_PROTECT: + return "Device/region is write-protected"; + case FLASH_ERR_NOT_INIT: + return "FLASH sub-system not initialized"; + case FLASH_ERR_DRV_VERIFY: + return "Data verify failed after operation"; + case FLASH_ERR_DRV_TIMEOUT: + return "Driver timed out waiting for device"; + case FLASH_ERR_DRV_WRONG_PART: + return "Driver does not support device"; + case FLASH_ERR_LOW_VOLTAGE: + return "Device reports low voltage"; + default: + return "Unknown error"; } } #endif @@ -110,13 +108,10 @@ FLASH_BANK_COMMAND_HANDLER(ecosflash_flash_bank_command) struct ecosflash_flash_bank *info; if (CMD_ARGC < 7) - { return ERROR_COMMAND_SYNTAX_ERROR; - } info = malloc(sizeof(struct ecosflash_flash_bank)); - if (info == NULL) - { + if (info == NULL) { LOG_ERROR("no memory for flash bank info"); exit(-1); } @@ -131,8 +126,7 @@ FLASH_BANK_COMMAND_HANDLER(ecosflash_flash_bank_command) uint32_t offset = 0; bank->num_sectors = bank->size/sectorSize; bank->sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors); - for (i = 0; i < bank->num_sectors; i++) - { + for (i = 0; i < bank->num_sectors; i++) { bank->sectors[i].offset = offset; bank->sectors[i].size = sectorSize; offset += bank->sectors[i].size; @@ -141,8 +135,7 @@ FLASH_BANK_COMMAND_HANDLER(ecosflash_flash_bank_command) } info->target = get_target(CMD_ARGV[5]); - if (info->target == NULL) - { + if (info->target == NULL) { LOG_ERROR("target '%s' not defined", CMD_ARGV[5]); return ERROR_FAIL; } @@ -160,20 +153,18 @@ static int loadDriver(struct ecosflash_flash_bank *info) struct target *target = info->target; int retval; - if ((retval = image_open(&image, info->driverPath, NULL)) != ERROR_OK) - { + retval = image_open(&image, info->driverPath, NULL); + if (retval != ERROR_OK) return retval; - } info->start_address = image.start_address; image_size = 0x0; int i; - for (i = 0; i < image.num_sections; i++) - { + for (i = 0; i < image.num_sections; i++) { void *buffer = malloc(image.sections[i].size); - if ((retval = image_read_section(&image, i, 0x0, image.sections[i].size, buffer, &buf_cnt)) != ERROR_OK) - { + retval = image_read_section(&image, i, 0x0, image.sections[i].size, buffer, &buf_cnt); + if (retval != ERROR_OK) { free(buffer); image_close(&image); return retval; @@ -181,7 +172,7 @@ static int loadDriver(struct ecosflash_flash_bank *info) target_write_buffer(target, image.sections[i].base_address, buf_cnt, buffer); image_size += buf_cnt; LOG_DEBUG("%zu bytes written at address 0x%8.8" PRIx32 "", - buf_cnt, image.sections[i].base_address); + buf_cnt, image.sections[i].base_address); free(buffer); } @@ -191,7 +182,7 @@ static int loadDriver(struct ecosflash_flash_bank *info) return ERROR_OK; } -static int const OFFSET_ERASE = 0x0; +static int const OFFSET_ERASE; static int const OFFSET_ERASE_SIZE = 0x8; static int const OFFSET_FLASH = 0xc; static int const OFFSET_FLASH_SIZE = 0x8; @@ -199,10 +190,10 @@ static int const OFFSET_GET_WORKAREA = 0x18; static int const OFFSET_GET_WORKAREA_SIZE = 0x4; static int runCode(struct ecosflash_flash_bank *info, - uint32_t codeStart, uint32_t codeStop, uint32_t r0, uint32_t r1, uint32_t r2, - uint32_t *result, - /* timeout in ms */ - int timeout) + uint32_t codeStart, uint32_t codeStop, uint32_t r0, uint32_t r1, uint32_t r2, + uint32_t *result, + /* timeout in ms */ + int timeout) { struct target *target = info->target; @@ -220,12 +211,9 @@ static int runCode(struct ecosflash_flash_bank *info, buf_set_u32(reg_params[1].value, 0, 32, r1); buf_set_u32(reg_params[2].value, 0, 32, r2); - int retval; - if ((retval = target_run_algorithm(target, 0, NULL, 3, reg_params, - codeStart, - codeStop, timeout, - &armv4_5_info)) != ERROR_OK) - { + int retval = target_run_algorithm(target, 0, NULL, 3, reg_params, + codeStart, codeStop, timeout, &armv4_5_info); + if (retval != ERROR_OK) { LOG_ERROR("error executing eCos flash algorithm"); return retval; } @@ -242,7 +230,7 @@ static int runCode(struct ecosflash_flash_bank *info, static int eCosBoard_erase(struct ecosflash_flash_bank *info, uint32_t address, uint32_t len) { int retval; - int timeout = (len / 20480 + 1) * 1000; /*asume 20 KB/s*/ + int timeout = (len / 20480 + 1) * 1000; /*asume 20 KB/s*/ retval = loadDriver(info); if (retval != ERROR_OK) @@ -257,12 +245,11 @@ static int eCosBoard_erase(struct ecosflash_flash_bank *info, uint32_t address, 0, &flashErr, timeout -); + ); if (retval != ERROR_OK) return retval; - if (flashErr != 0x0) - { + if (flashErr != 0x0) { LOG_ERROR("Flash erase failed with %d (%s)", (int)flashErr, flash_errmsg(flashErr)); return ERROR_FAIL; } @@ -270,12 +257,15 @@ static int eCosBoard_erase(struct ecosflash_flash_bank *info, uint32_t address, return ERROR_OK; } -static int eCosBoard_flash(struct ecosflash_flash_bank *info, void *data, uint32_t address, uint32_t len) +static int eCosBoard_flash(struct ecosflash_flash_bank *info, + void *data, + uint32_t address, + uint32_t len) { struct target *target = info->target; const int chunk = 8192; int retval = ERROR_OK; - int timeout = (chunk / 20480 + 1) * 1000; /*asume 20 KB/s + 1 second*/ + int timeout = (chunk / 20480 + 1) * 1000; /*asume 20 KB/s + 1 second*/ retval = loadDriver(info); if (retval != ERROR_OK) @@ -295,13 +285,10 @@ static int eCosBoard_flash(struct ecosflash_flash_bank *info, void *data, uint32 uint32_t i; - for (i = 0; i < len; i += chunk) - { + for (i = 0; i < len; i += chunk) { int t = len-i; if (t > chunk) - { t = chunk; - } retval = target_write_buffer(target, buffer, t, ((uint8_t *)data) + i); if (retval != ERROR_OK) @@ -319,9 +306,9 @@ static int eCosBoard_flash(struct ecosflash_flash_bank *info, void *data, uint32 if (retval != ERROR_OK) return retval; - if (flashErr != 0x0) - { - LOG_ERROR("Flash prog failed with %d (%s)", (int)flashErr, flash_errmsg(flashErr)); + if (flashErr != 0x0) { + LOG_ERROR("Flash prog failed with %d (%s)", (int)flashErr, + flash_errmsg(flashErr)); return ERROR_FAIL; } } @@ -339,19 +326,12 @@ static void command(struct flash_bank *bank, uint8_t cmd, uint8_t *cmd_buf) struct ecosflash_flash_bank *info = bank->driver_priv; int i; - if (info->target->endianness == TARGET_LITTLE_ENDIAN) - { + if (info->target->endianness == TARGET_LITTLE_ENDIAN) { for (i = bank->bus_width; i > 0; i--) - { *cmd_buf++ = (i & (bank->chip_width - 1)) ? 0x0 : cmd; - } - } - else - { + } else { for (i = 1; i <= bank->bus_width; i++) - { *cmd_buf++ = (i & (bank->chip_width - 1)) ? 0x0 : cmd; - } } } #endif @@ -360,8 +340,7 @@ static void command(struct flash_bank *bank, uint8_t cmd, uint8_t *cmd_buf) static uint32_t ecosflash_address(struct flash_bank *bank, uint32_t address) { uint32_t retval = 0; - switch (bank->bus_width) - { + switch (bank->bus_width) { case 4: retval = address & 0xfffffffc; case 2: @@ -386,7 +365,8 @@ static int ecosflash_protect(struct flash_bank *bank, int set, int first, int la return ERROR_OK; } -static int ecosflash_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, uint32_t count) +static int ecosflash_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, + uint32_t count) { struct ecosflash_flash_bank *info = bank->driver_priv; struct flash_bank *c = bank; @@ -411,7 +391,7 @@ static uint32_t ecosflash_get_flash_status(struct flash_bank *bank) return ERROR_OK; } -static void ecosflash_set_flash_mode(struct flash_bank *bank,int mode) +static void ecosflash_set_flash_mode(struct flash_bank *bank, int mode) { } @@ -421,7 +401,10 @@ static uint32_t ecosflash_wait_status_busy(struct flash_bank *bank, uint32_t wai return ERROR_OK; } -static int ecosflash_handle_gpnvm_command(struct command_context *cmd_ctx, char *cmd, char **args, int argc) +static int ecosflash_handle_gpnvm_command(struct command_context *cmd_ctx, + char *cmd, + char **args, + int argc) { return ERROR_OK; } diff --git a/src/flash/nor/em357.c b/src/flash/nor/em357.c index 2e40601f..7c697f13 100644 --- a/src/flash/nor/em357.c +++ b/src/flash/nor/em357.c @@ -7,7 +7,7 @@ * * Copyright (C) 2011 by Erik Botö * erik.boto@pelagicore.com - * + * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * @@ -23,6 +23,7 @@ * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ + #ifdef HAVE_CONFIG_H #include "config.h" #endif @@ -34,60 +35,58 @@ /* em357 register locations */ -#define EM357_FLASH_ACR 0x40008000 -#define EM357_FLASH_KEYR 0x40008004 -#define EM357_FLASH_OPTKEYR 0x40008008 -#define EM357_FLASH_SR 0x4000800C -#define EM357_FLASH_CR 0x40008010 -#define EM357_FLASH_AR 0x40008014 -#define EM357_FLASH_OBR 0x4000801C -#define EM357_FLASH_WRPR 0x40008020 +#define EM357_FLASH_ACR 0x40008000 +#define EM357_FLASH_KEYR 0x40008004 +#define EM357_FLASH_OPTKEYR 0x40008008 +#define EM357_FLASH_SR 0x4000800C +#define EM357_FLASH_CR 0x40008010 +#define EM357_FLASH_AR 0x40008014 +#define EM357_FLASH_OBR 0x4000801C +#define EM357_FLASH_WRPR 0x40008020 -#define EM357_FPEC_CLK 0x4000402c +#define EM357_FPEC_CLK 0x4000402c /* option byte location */ -#define EM357_OB_RDP 0x08040800 -#define EM357_OB_WRP0 0x08040808 -#define EM357_OB_WRP1 0x0804080A -#define EM357_OB_WRP2 0x0804080C +#define EM357_OB_RDP 0x08040800 +#define EM357_OB_WRP0 0x08040808 +#define EM357_OB_WRP1 0x0804080A +#define EM357_OB_WRP2 0x0804080C /* FLASH_CR register bits */ -#define FLASH_PG (1 << 0) -#define FLASH_PER (1 << 1) -#define FLASH_MER (1 << 2) -#define FLASH_OPTPG (1 << 4) -#define FLASH_OPTER (1 << 5) -#define FLASH_STRT (1 << 6) -#define FLASH_LOCK (1 << 7) -#define FLASH_OPTWRE (1 << 9) +#define FLASH_PG (1 << 0) +#define FLASH_PER (1 << 1) +#define FLASH_MER (1 << 2) +#define FLASH_OPTPG (1 << 4) +#define FLASH_OPTER (1 << 5) +#define FLASH_STRT (1 << 6) +#define FLASH_LOCK (1 << 7) +#define FLASH_OPTWRE (1 << 9) /* FLASH_SR register bits */ -#define FLASH_BSY (1 << 0) -#define FLASH_PGERR (1 << 2) -#define FLASH_WRPRTERR (1 << 4) -#define FLASH_EOP (1 << 5) +#define FLASH_BSY (1 << 0) +#define FLASH_PGERR (1 << 2) +#define FLASH_WRPRTERR (1 << 4) +#define FLASH_EOP (1 << 5) /* EM357_FLASH_OBR bit definitions (reading) */ -#define OPT_ERROR 0 -#define OPT_READOUT 1 +#define OPT_ERROR 0 +#define OPT_READOUT 1 /* register unlock keys */ -#define KEY1 0x45670123 -#define KEY2 0xCDEF89AB +#define KEY1 0x45670123 +#define KEY2 0xCDEF89AB -struct em357_options -{ +struct em357_options { uint16_t RDP; uint16_t user_options; uint16_t protection[3]; }; -struct em357_flash_bank -{ +struct em357_flash_bank { struct em357_options option_bytes; struct working_area *write_algorithm; int ppage_size; @@ -103,9 +102,7 @@ FLASH_BANK_COMMAND_HANDLER(em357_flash_bank_command) struct em357_flash_bank *em357_info; if (CMD_ARGC < 6) - { return ERROR_COMMAND_SYNTAX_ERROR; - } em357_info = malloc(sizeof(struct em357_flash_bank)); bank->driver_priv = em357_info; @@ -129,37 +126,32 @@ static int em357_wait_status_busy(struct flash_bank *bank, int timeout) int retval = ERROR_OK; /* wait for busy to clear */ - for (;;) - { + for (;; ) { retval = em357_get_flash_status(bank, &status); if (retval != ERROR_OK) return retval; LOG_DEBUG("status: 0x%" PRIx32 "", status); if ((status & FLASH_BSY) == 0) break; - if (timeout-- <= 0) - { + if (timeout-- <= 0) { LOG_ERROR("timed out waiting for flash"); return ERROR_FAIL; } alive_sleep(1); } - if (status & FLASH_WRPRTERR) - { + if (status & FLASH_WRPRTERR) { LOG_ERROR("em357 device protected"); retval = ERROR_FAIL; } - if (status & FLASH_PGERR) - { + if (status & FLASH_PGERR) { LOG_ERROR("em357 device programming failed"); retval = ERROR_FAIL; } /* Clear but report errors */ - if (status & (FLASH_WRPRTERR | FLASH_PGERR)) - { + if (status & (FLASH_WRPRTERR | FLASH_PGERR)) { /* If this operation fails, we ignore it and report the original * retval */ @@ -330,8 +322,7 @@ static int em357_protect_check(struct flash_bank *bank) int num_bits; int set; - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -344,8 +335,7 @@ static int em357_protect_check(struct flash_bank *bank) /* each protection bit is for 4 * 2K pages */ num_bits = (bank->num_sectors / em357_info->ppage_size); - for (i = 0; i < num_bits; i++) - { + for (i = 0; i < num_bits; i++) { set = 1; if (protection & (1 << i)) set = 0; @@ -362,16 +352,13 @@ static int em357_erase(struct flash_bank *bank, int first, int last) struct target *target = bank->target; int i; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } if ((first == 0) && (last == (bank->num_sectors - 1))) - { return em357_mass_erase(bank); - } /* unlock flash registers */ int retval = target_write_u32(target, EM357_FLASH_KEYR, KEY1); @@ -381,8 +368,7 @@ static int em357_erase(struct flash_bank *bank, int first, int last) if (retval != ERROR_OK) return retval; - for (i = first; i <= last; i++) - { + for (i = first; i <= last; i++) { retval = target_write_u32(target, EM357_FLASH_CR, FLASH_PER); if (retval != ERROR_OK) return retval; @@ -419,22 +405,19 @@ static int em357_protect(struct flash_bank *bank, int set, int first, int last) em357_info = bank->driver_priv; - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - if ((first % em357_info->ppage_size) != 0) - { + if ((first % em357_info->ppage_size) != 0) { LOG_WARNING("aligned start protect sector to a %d sector boundary", - em357_info->ppage_size); + em357_info->ppage_size); first = first - (first % em357_info->ppage_size); } - if (((last + 1) % em357_info->ppage_size) != 0) - { + if (((last + 1) % em357_info->ppage_size) != 0) { LOG_WARNING("aligned end protect sector to a %d sector boundary", - em357_info->ppage_size); + em357_info->ppage_size); last++; last = last - (last % em357_info->ppage_size); last--; @@ -449,8 +432,7 @@ static int em357_protect(struct flash_bank *bank, int set, int first, int last) prot_reg[1] = (uint16_t)(protection >> 8); prot_reg[2] = (uint16_t)(protection >> 16); - for (i = first; i <= last; i++) - { + for (i = first; i <= last; i++) { reg = (i / em357_info->ppage_size) / 8; bit = (i / em357_info->ppage_size) - (reg * 8); @@ -461,7 +443,8 @@ static int em357_protect(struct flash_bank *bank, int set, int first, int last) prot_reg[reg] |= (1 << bit); } - if ((status = em357_erase_options(bank)) != ERROR_OK) + status = em357_erase_options(bank); + if (retval != ERROR_OK) return status; em357_info->option_bytes.protection[0] = prot_reg[0]; @@ -472,7 +455,7 @@ static int em357_protect(struct flash_bank *bank, int set, int first, int last) } static int em357_write_block(struct flash_bank *bank, uint8_t *buffer, - uint32_t offset, uint32_t count) + uint32_t offset, uint32_t count) { struct em357_flash_bank *em357_info = bank->driver_priv; struct target *target = bank->target; @@ -483,61 +466,63 @@ static int em357_write_block(struct flash_bank *bank, uint8_t *buffer, struct armv7m_algorithm armv7m_info; int retval = ERROR_OK; - /* see contib/loaders/flash/stm32x.s for src, the same is used here except for + /* see contib/loaders/flash/stm32x.s for src, the same is used here except for * a modified *_FLASH_BASE */ static const uint8_t em357_flash_write_code[] = { - /* #define EM357_FLASH_CR_OFFSET 0x10 */ - /* #define EM357_FLASH_SR_OFFSET 0x0C */ - /* write: */ + /* #define EM357_FLASH_CR_OFFSET 0x10 + * #define EM357_FLASH_SR_OFFSET 0x0C + * write: */ 0x08, 0x4c, /* ldr r4, EM357_FLASH_BASE */ 0x1c, 0x44, /* add r4, r3 */ - /* write_half_word: */ + /* write_half_word: */ 0x01, 0x23, /* movs r3, #0x01 */ - 0x23, 0x61, /* str r3, [r4, #EM357_FLASH_CR_OFFSET] */ + 0x23, 0x61, /* str r3, [r4, + *#EM357_FLASH_CR_OFFSET] */ 0x30, 0xf8, 0x02, 0x3b, /* ldrh r3, [r0], #0x02 */ 0x21, 0xf8, 0x02, 0x3b, /* strh r3, [r1], #0x02 */ - /* busy: */ - 0xe3, 0x68, /* ldr r3, [r4, #EM357_FLASH_SR_OFFSET] */ + /* busy: */ + 0xe3, 0x68, /* ldr r3, [r4, + *#EM357_FLASH_SR_OFFSET] */ 0x13, 0xf0, 0x01, 0x0f, /* tst r3, #0x01 */ 0xfb, 0xd0, /* beq busy */ 0x13, 0xf0, 0x14, 0x0f, /* tst r3, #0x14 */ 0x01, 0xd1, /* bne exit */ 0x01, 0x3a, /* subs r2, r2, #0x01 */ 0xf0, 0xd1, /* bne write_half_word */ - /* exit: */ + /* exit: */ 0x00, 0xbe, /* bkpt #0x00 */ 0x00, 0x80, 0x00, 0x40, /* EM357_FLASH_BASE: .word 0x40008000 */ }; /* flash write code */ if (target_alloc_working_area(target, sizeof(em357_flash_write_code), - &em357_info->write_algorithm) != ERROR_OK) - { + &em357_info->write_algorithm) != ERROR_OK) { LOG_WARNING("no working area available, can't do block memory writes"); return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; - }; + } + ; - if ((retval = target_write_buffer(target, em357_info->write_algorithm->address, - sizeof(em357_flash_write_code), - (uint8_t*)em357_flash_write_code)) != ERROR_OK) + retval = target_write_buffer(target, em357_info->write_algorithm->address, + sizeof(em357_flash_write_code), (uint8_t *)em357_flash_write_code); + if (retval != ERROR_OK) return retval; /* memory buffer */ - while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) - { + while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) { buffer_size /= 2; - if (buffer_size <= 256) - { + if (buffer_size <= 256) { /* if we already allocated the writing code, but failed to get a * buffer, free the algorithm */ if (em357_info->write_algorithm) target_free_working_area(target, em357_info->write_algorithm); - LOG_WARNING("no large enough working area available, can't do block memory writes"); + LOG_WARNING( + "no large enough working area available, can't do block memory writes"); return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; } - }; + } + ; armv7m_info.common_magic = ARMV7M_COMMON_MAGIC; armv7m_info.core_mode = ARMV7M_MODE_ANY; @@ -547,13 +532,12 @@ static int em357_write_block(struct flash_bank *bank, uint8_t *buffer, init_reg_param(®_params[2], "r2", 32, PARAM_OUT); init_reg_param(®_params[3], "r3", 32, PARAM_IN_OUT); - while (count > 0) - { + while (count > 0) { uint32_t thisrun_count = (count > (buffer_size / 2)) ? - (buffer_size / 2) : count; + (buffer_size / 2) : count; - if ((retval = target_write_buffer(target, source->address, - thisrun_count * 2, buffer)) != ERROR_OK) + retval = target_write_buffer(target, source->address, thisrun_count * 2, buffer); + if (retval != ERROR_OK) break; buf_set_u32(reg_params[0].value, 0, 32, source->address); @@ -561,17 +545,14 @@ static int em357_write_block(struct flash_bank *bank, uint8_t *buffer, buf_set_u32(reg_params[2].value, 0, 32, thisrun_count); buf_set_u32(reg_params[3].value, 0, 32, 0); - if ((retval = target_run_algorithm(target, 0, NULL, 4, reg_params, - em357_info->write_algorithm->address, - 0, - 10000, &armv7m_info)) != ERROR_OK) - { + retval = target_run_algorithm(target, 0, NULL, 4, reg_params, + em357_info->write_algorithm->address, 0, 10000, &armv7m_info); + if (retval != ERROR_OK) { LOG_ERROR("error executing em357 flash write algorithm"); break; } - if (buf_get_u32(reg_params[3].value, 0, 32) & FLASH_PGERR) - { + if (buf_get_u32(reg_params[3].value, 0, 32) & FLASH_PGERR) { LOG_ERROR("flash memory not erased before writing"); /* Clear but report errors */ target_write_u32(target, EM357_FLASH_SR, FLASH_PGERR); @@ -579,8 +560,7 @@ static int em357_write_block(struct flash_bank *bank, uint8_t *buffer, break; } - if (buf_get_u32(reg_params[3].value, 0, 32) & FLASH_WRPRTERR) - { + if (buf_get_u32(reg_params[3].value, 0, 32) & FLASH_WRPRTERR) { LOG_ERROR("flash memory write protected"); /* Clear but report errors */ target_write_u32(target, EM357_FLASH_SR, FLASH_WRPRTERR); @@ -605,7 +585,7 @@ static int em357_write_block(struct flash_bank *bank, uint8_t *buffer, } static int em357_write(struct flash_bank *bank, uint8_t *buffer, - uint32_t offset, uint32_t count) + uint32_t offset, uint32_t count) { struct target *target = bank->target; uint32_t words_remaining = (count / 2); @@ -614,14 +594,12 @@ static int em357_write(struct flash_bank *bank, uint8_t *buffer, uint32_t bytes_written = 0; int retval; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - if (offset & 0x1) - { + if (offset & 0x1) { LOG_WARNING("offset 0x%" PRIx32 " breaks required 2-byte alignment", offset); return ERROR_FLASH_DST_BREAKS_ALIGNMENT; } @@ -635,20 +613,17 @@ static int em357_write(struct flash_bank *bank, uint8_t *buffer, return retval; /* multiple half words (2-byte) to be programmed? */ - if (words_remaining > 0) - { + if (words_remaining > 0) { /* try using a block write */ - if ((retval = em357_write_block(bank, buffer, offset, words_remaining)) != ERROR_OK) - { - if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) - { + retval = em357_write_block(bank, buffer, offset, words_remaining); + if (retval != ERROR_OK) { + if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) { /* if block write failed (no sufficient working area), * we use normal (slow) single dword accesses */ - LOG_WARNING("couldn't use block writes, falling back to single memory accesses"); + LOG_WARNING( + "couldn't use block writes, falling back to single memory accesses"); } - } - else - { + } else { buffer += words_remaining * 2; address += words_remaining * 2; words_remaining = 0; @@ -658,8 +633,7 @@ static int em357_write(struct flash_bank *bank, uint8_t *buffer, if ((retval != ERROR_OK) && (retval != ERROR_TARGET_RESOURCE_NOT_AVAILABLE)) return retval; - while (words_remaining > 0) - { + while (words_remaining > 0) { uint16_t value; memcpy(&value, buffer + bytes_written, sizeof(uint16_t)); @@ -679,8 +653,7 @@ static int em357_write(struct flash_bank *bank, uint8_t *buffer, address += 2; } - if (bytes_remaining) - { + if (bytes_remaining) { uint16_t value = 0xffff; memcpy(&value, buffer + bytes_written, bytes_remaining); @@ -721,8 +694,7 @@ static int em357_probe(struct flash_bank *bank) LOG_INFO("flash size = %dkbytes", num_pages*page_size/1024); - if (bank->sectors) - { + if (bank->sectors) { free(bank->sectors); bank->sectors = NULL; } @@ -732,8 +704,7 @@ static int em357_probe(struct flash_bank *bank) bank->num_sectors = num_pages; bank->sectors = malloc(sizeof(struct flash_sector) * num_pages); - for (i = 0; i < num_pages; i++) - { + for (i = 0; i < num_pages; i++) { bank->sectors[i].offset = i * page_size; bank->sectors[i].size = page_size; bank->sectors[i].is_erased = -1; @@ -766,9 +737,7 @@ COMMAND_HANDLER(em357_handle_lock_command) struct em357_flash_bank *em357_info = NULL; if (CMD_ARGC < 1) - { return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); @@ -779,14 +748,12 @@ COMMAND_HANDLER(em357_handle_lock_command) target = bank->target; - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - if (em357_erase_options(bank) != ERROR_OK) - { + if (em357_erase_options(bank) != ERROR_OK) { command_print(CMD_CTX, "em357 failed to erase options"); return ERROR_OK; } @@ -794,8 +761,7 @@ COMMAND_HANDLER(em357_handle_lock_command) /* set readout protection */ em357_info->option_bytes.RDP = 0; - if (em357_write_options(bank) != ERROR_OK) - { + if (em357_write_options(bank) != ERROR_OK) { command_print(CMD_CTX, "em357 failed to lock device"); return ERROR_OK; } @@ -810,9 +776,7 @@ COMMAND_HANDLER(em357_handle_unlock_command) struct target *target = NULL; if (CMD_ARGC < 1) - { return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); @@ -821,27 +785,24 @@ COMMAND_HANDLER(em357_handle_unlock_command) target = bank->target; - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - if (em357_erase_options(bank) != ERROR_OK) - { + if (em357_erase_options(bank) != ERROR_OK) { command_print(CMD_CTX, "em357 failed to unlock device"); return ERROR_OK; } - if (em357_write_options(bank) != ERROR_OK) - { + if (em357_write_options(bank) != ERROR_OK) { command_print(CMD_CTX, "em357 failed to lock device"); return ERROR_OK; } command_print(CMD_CTX, "em357 unlocked.\n" - "INFO: a reset or power cycle is required " - "for the new settings to take effect."); + "INFO: a reset or power cycle is required " + "for the new settings to take effect."); return ERROR_OK; } @@ -850,8 +811,7 @@ static int em357_mass_erase(struct flash_bank *bank) { struct target *target = bank->target; - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -888,9 +848,7 @@ COMMAND_HANDLER(em357_handle_mass_erase_command) int i; if (CMD_ARGC < 1) - { return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); @@ -898,20 +856,14 @@ COMMAND_HANDLER(em357_handle_mass_erase_command) return retval; retval = em357_mass_erase(bank); - if (retval == ERROR_OK) - { + if (retval == ERROR_OK) { /* set all sectors as erased */ for (i = 0; i < bank->num_sectors; i++) - { bank->sectors[i].is_erased = 1; - } command_print(CMD_CTX, "em357 mass erase complete"); - } - else - { + } else command_print(CMD_CTX, "em357 mass erase failed"); - } return retval; } diff --git a/src/flash/nor/faux.c b/src/flash/nor/faux.c index 75ea9d60..2da4dbe3 100644 --- a/src/flash/nor/faux.c +++ b/src/flash/nor/faux.c @@ -17,6 +17,7 @@ * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ + #ifdef HAVE_CONFIG_H #include "config.h" #endif @@ -25,9 +26,7 @@ #include #include "hello.h" - -struct faux_flash_bank -{ +struct faux_flash_bank { struct target *target; uint8_t *memory; uint32_t start_address; @@ -43,19 +42,15 @@ FLASH_BANK_COMMAND_HANDLER(faux_flash_bank_command) struct faux_flash_bank *info; if (CMD_ARGC < 6) - { return ERROR_COMMAND_SYNTAX_ERROR; - } info = malloc(sizeof(struct faux_flash_bank)); - if (info == NULL) - { + if (info == NULL) { LOG_ERROR("no memory for flash bank info"); return ERROR_FAIL; } info->memory = malloc(bank->size); - if (info == NULL) - { + if (info == NULL) { free(info); LOG_ERROR("no memory for flash bank info"); return ERROR_FAIL; @@ -67,8 +62,7 @@ FLASH_BANK_COMMAND_HANDLER(faux_flash_bank_command) uint32_t offset = 0; bank->num_sectors = bank->size/sectorSize; bank->sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors); - for (i = 0; i < bank->num_sectors; i++) - { + for (i = 0; i < bank->num_sectors; i++) { bank->sectors[i].offset = offset; bank->sectors[i].size = sectorSize; offset += bank->sectors[i].size; @@ -77,8 +71,7 @@ FLASH_BANK_COMMAND_HANDLER(faux_flash_bank_command) } info->target = get_target(CMD_ARGV[5]); - if (info->target == NULL) - { + if (info->target == NULL) { LOG_ERROR("target '%s' not defined", CMD_ARGV[5]); free(info->memory); free(info); @@ -96,7 +89,7 @@ static int faux_erase(struct flash_bank *bank, int first, int last) static int faux_protect(struct flash_bank *bank, int set, int first, int last) { - LOG_USER("set protection sector %d to %d to %s", first, last, set?"on":"off"); + LOG_USER("set protection sector %d to %d to %s", first, last, set ? "on" : "off"); return ERROR_OK; } diff --git a/src/flash/nor/fm3.c b/src/flash/nor/fm3.c index 9f9695e7..22772aaa 100644 --- a/src/flash/nor/fm3.c +++ b/src/flash/nor/fm3.c @@ -31,8 +31,7 @@ #define FLASH_DQ6 0x00000040 /* Data toggle flag bit (TOGG) position */ #define FLASH_DQ5 0x00000020 /* Time limit exceeding flag bit (TLOV) position */ -enum fm3_variant -{ +enum fm3_variant { mb9bfxx1, /* Flash Type '1' */ mb9bfxx2, mb9bfxx3, @@ -47,15 +46,13 @@ enum fm3_variant mb9afxx6 }; -enum fm3_flash_type -{ +enum fm3_flash_type { fm3_no_flash_type = 0, fm3_flash_type1 = 1, fm3_flash_type2 = 2 }; -struct fm3_flash_bank -{ +struct fm3_flash_bank { struct working_area *write_algorithm; enum fm3_variant variant; enum fm3_flash_type flashtype; diff --git a/src/flash/nor/imp.h b/src/flash/nor/imp.h index de1bc9e5..e8e8a6fb 100644 --- a/src/flash/nor/imp.h +++ b/src/flash/nor/imp.h @@ -16,13 +16,14 @@ * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ + #ifndef FLASH_NOR_IMP_H #define FLASH_NOR_IMP_H -// this is an internal header +/* this is an internal header */ #include "core.h" #include "driver.h" -// almost all drivers will need this file +/* almost all drivers will need this file */ #include /** @@ -47,4 +48,4 @@ int flash_driver_read(struct flash_bank *bank, int flash_write_unlock(struct target *target, struct image *image, uint32_t *written, int erase, bool unlock); -#endif // FLASH_NOR_IMP_H +#endif /* FLASH_NOR_IMP_H */ diff --git a/src/flash/nor/kinetis.c b/src/flash/nor/kinetis.c index 0cfbd7ad..79953c0b 100644 --- a/src/flash/nor/kinetis.c +++ b/src/flash/nor/kinetis.c @@ -20,6 +20,7 @@ * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ + #ifdef HAVE_CONFIG_H #include "config.h" #endif @@ -32,12 +33,12 @@ struct kinetis_flash_bank { }; static int kinetis_get_master_bank(struct flash_bank *bank, - struct flash_bank **master_bank) + struct flash_bank **master_bank) { *master_bank = get_flash_bank_by_name_noprobe(bank->name); if (*master_bank == NULL) { LOG_ERROR("master flash bank '%s' does not exist", - (char *)bank->driver_priv); + (char *)bank->driver_priv); return ERROR_FLASH_OPERATION_FAILED; } @@ -51,9 +52,8 @@ static int kinetis_update_bank_info(struct flash_bank *bank) result = kinetis_get_master_bank(bank, &master_bank); - if (result != ERROR_OK) { + if (result != ERROR_OK) return result; - } /* update the info we do not have */ bank->size = master_bank->size; @@ -69,9 +69,8 @@ FLASH_BANK_COMMAND_HANDLER(kinetis_flash_bank_command) { struct kinetis_flash_bank *bank_info; - if (CMD_ARGC < 6) { + if (CMD_ARGC < 6) return ERROR_COMMAND_SYNTAX_ERROR; - } LOG_INFO("add flash_bank kinetis %s", bank->name); @@ -85,16 +84,15 @@ FLASH_BANK_COMMAND_HANDLER(kinetis_flash_bank_command) } static int kinetis_protect(struct flash_bank *bank, int set, int first, - int last) + int last) { int result; struct flash_bank *master_bank; result = kinetis_get_master_bank(bank, &master_bank); - if (result != ERROR_OK) { + if (result != ERROR_OK) return result; - } LOG_WARNING("kinetis_protect not supported yet"); @@ -121,16 +119,14 @@ static int kinetis_protect_check(struct flash_bank *bank) result = kinetis_get_master_bank(bank, &master_bank); - if (result != ERROR_OK) { + if (result != ERROR_OK) return result; - } /* read protection register FTFL_FPROT */ result = target_read_memory(bank->target, 0x40020010, 1, 4, buffer); - if (result != ERROR_OK) { + if (result != ERROR_OK) return result; - } fprot = target_buffer_get_u32(bank->target, buffer); @@ -157,7 +153,7 @@ static int kinetis_protect_check(struct flash_bank *bank) } static int kinetis_ftfl_command(struct flash_bank *bank, uint32_t w0, - uint32_t w1, uint32_t w2) + uint32_t w1, uint32_t w2) { uint8_t buffer[12]; int result, i; @@ -165,11 +161,10 @@ static int kinetis_ftfl_command(struct flash_bank *bank, uint32_t w0, /* wait for done */ for (i = 0; i < 50; i++) { result = - target_read_memory(bank->target, 0x40020000, 1, 1, buffer); + target_read_memory(bank->target, 0x40020000, 1, 1, buffer); - if (result != ERROR_OK) { + if (result != ERROR_OK) return result; - } if (buffer[0] & 0x80) break; @@ -181,10 +176,9 @@ static int kinetis_ftfl_command(struct flash_bank *bank, uint32_t w0, /* reset error flags */ buffer[0] = 0x30; result = - target_write_memory(bank->target, 0x40020000, 1, 1, buffer); - if (result != ERROR_OK) { + target_write_memory(bank->target, 0x40020000, 1, 1, buffer); + if (result != ERROR_OK) return result; - } } target_buffer_set_u32(bank->target, buffer, w0); @@ -193,25 +187,22 @@ static int kinetis_ftfl_command(struct flash_bank *bank, uint32_t w0, result = target_write_memory(bank->target, 0x40020004, 4, 3, buffer); - if (result != ERROR_OK) { + if (result != ERROR_OK) return result; - } /* start command */ buffer[0] = 0x80; result = target_write_memory(bank->target, 0x40020000, 1, 1, buffer); - if (result != ERROR_OK) { + if (result != ERROR_OK) return result; - } /* wait for done */ for (i = 0; i < 50; i++) { result = - target_read_memory(bank->target, 0x40020000, 1, 1, buffer); + target_read_memory(bank->target, 0x40020000, 1, 1, buffer); - if (result != ERROR_OK) { + if (result != ERROR_OK) return result; - } if (buffer[0] & 0x80) break; @@ -221,8 +212,8 @@ static int kinetis_ftfl_command(struct flash_bank *bank, uint32_t w0, if (buffer[0] != 0x80) { LOG_ERROR - ("ftfl command failed FSTAT: %02X W0: %08X W1: %08X W2: %08X", - buffer[0], w0, w1, w2); + ("ftfl command failed FSTAT: %02X W0: %08X W1: %08X W2: %08X", + buffer[0], w0, w1, w2); return ERROR_FLASH_OPERATION_FAILED; } @@ -243,13 +234,11 @@ static int kinetis_erase(struct flash_bank *bank, int first, int last) result = kinetis_get_master_bank(bank, &master_bank); - if (result != ERROR_OK) { + if (result != ERROR_OK) return result; - } - if ((first > bank->num_sectors) || (last > bank->num_sectors)) { + if ((first > bank->num_sectors) || (last > bank->num_sectors)) return ERROR_FLASH_OPERATION_FAILED; - } for (i = first; i <= last; i++) { /* set command and sector address */ @@ -267,20 +256,20 @@ static int kinetis_erase(struct flash_bank *bank, int first, int last) if (first == 0) { LOG_WARNING - ("flash configuration field erased, please reset the device"); + ("flash configuration field erased, please reset the device"); } return ERROR_OK; } -static int kinetis_write(struct flash_bank *bank, uint8_t * buffer, - uint32_t offset, uint32_t count) +static int kinetis_write(struct flash_bank *bank, uint8_t *buffer, + uint32_t offset, uint32_t count) { struct flash_bank *master_bank; unsigned int i, result, fallback = 0, nvm = 0; uint8_t buf[8]; uint32_t wc, w0 = 0, w1 = 0, w2 = 0; - struct kinetis_flash_bank * kbank = (struct kinetis_flash_bank *) + struct kinetis_flash_bank *kbank = (struct kinetis_flash_bank *) bank->driver_priv; if (bank->target->state != TARGET_HALTED) { @@ -290,9 +279,8 @@ static int kinetis_write(struct flash_bank *bank, uint8_t * buffer, result = kinetis_get_master_bank(bank, &master_bank); - if (result != ERROR_OK) { + if (result != ERROR_OK) return result; - } if (offset >= kbank->nvm_start) nvm = 1; @@ -327,8 +315,8 @@ static int kinetis_write(struct flash_bank *bank, uint8_t * buffer, /* fallback to longword write */ fallback = 1; - LOG_WARNING("ram not ready, fallback to slow longword write (FCNFG: %02X)", - buf[0]); + LOG_WARNING("ram not ready, fallback to slow longword write (FCNFG: %02X)", + buf[0]); } } else { LOG_DEBUG("flash write into PFLASH @08%X", offset); @@ -347,12 +335,12 @@ static int kinetis_write(struct flash_bank *bank, uint8_t * buffer, } LOG_DEBUG("write section @ %08X with length %d", - offset + i, wc * 4); + offset + i, wc * 4); /* write data to flexram */ result = - target_write_memory(bank->target, 0x14000000, 4, wc, - buffer + i); + target_write_memory(bank->target, 0x14000000, 4, wc, + buffer + i); if (result != ERROR_OK) { LOG_ERROR("target_write_memory failed"); @@ -366,9 +354,8 @@ static int kinetis_write(struct flash_bank *bank, uint8_t * buffer, result = kinetis_ftfl_command(bank, w0, w1, w2); - if (result != ERROR_OK) { + if (result != ERROR_OK) return ERROR_FLASH_OPERATION_FAILED; - } } } /* program longword command */ @@ -381,9 +368,8 @@ static int kinetis_write(struct flash_bank *bank, uint8_t * buffer, result = kinetis_ftfl_command(bank, w0, w1, w2); - if (result != ERROR_OK) { + if (result != ERROR_OK) return ERROR_FLASH_OPERATION_FAILED; - } } } @@ -405,97 +391,93 @@ static int kinetis_probe(struct flash_bank *bank) result = kinetis_get_master_bank(bank, &master_bank); - if (result != ERROR_OK) { + if (result != ERROR_OK) return result; - } result = target_read_memory(bank->target, 0x40048024, 1, 4, buf); - if (result != ERROR_OK) { + if (result != ERROR_OK) return result; - } sim_sdid = target_buffer_get_u32(bank->target, buf); result = target_read_memory(bank->target, 0x4004804c, 1, 4, buf); - if (result != ERROR_OK) { + if (result != ERROR_OK) return result; - } sim_fcfg1 = target_buffer_get_u32(bank->target, buf); result = target_read_memory(bank->target, 0x40048050, 1, 4, buf); - if (result != ERROR_OK) { + if (result != ERROR_OK) return result; - } sim_fcfg2 = target_buffer_get_u32(bank->target, buf); LOG_DEBUG("SDID: %08X FCFG1: %08X FCFG2: %08X", sim_sdid, sim_fcfg1, - sim_fcfg2); + sim_fcfg2); switch ((sim_fcfg1 >> 28) & 0x0f) { - case 0x07: - nvm_size = 128 * 1024; - break; - case 0x09: - case 0x0f: - nvm_size = 256 * 1024; - break; - default: - nvm_size = 0; - break; + case 0x07: + nvm_size = 128 * 1024; + break; + case 0x09: + case 0x0f: + nvm_size = 256 * 1024; + break; + default: + nvm_size = 0; + break; } switch ((sim_fcfg1 >> 24) & 0x0f) { - case 0x07: - pf_size = 128 * 1024; - break; - case 0x09: - pf_size = 256 * 1024; - break; - case 0x0b: - case 0x0f: - pf_size = 512 * 1024; - break; - default: - pf_size = 0; - break; + case 0x07: + pf_size = 128 * 1024; + break; + case 0x09: + pf_size = 256 * 1024; + break; + case 0x0b: + case 0x0f: + pf_size = 512 * 1024; + break; + default: + pf_size = 0; + break; } switch ((sim_fcfg1 >> 16) & 0x0f) { - case 0x02: - ee_size = 4 * 1024; - break; - case 0x03: - ee_size = 2 * 1024; - break; - case 0x04: - ee_size = 1 * 1024; - break; - case 0x05: - ee_size = 512; - break; - case 0x06: - ee_size = 256; - break; - case 0x07: - ee_size = 128; - break; - case 0x08: - ee_size = 64; - break; - case 0x09: - ee_size = 32; - break; - default: - ee_size = 0; - break; + case 0x02: + ee_size = 4 * 1024; + break; + case 0x03: + ee_size = 2 * 1024; + break; + case 0x04: + ee_size = 1 * 1024; + break; + case 0x05: + ee_size = 512; + break; + case 0x06: + ee_size = 256; + break; + case 0x07: + ee_size = 128; + break; + case 0x08: + ee_size = 64; + break; + case 0x09: + ee_size = 32; + break; + default: + ee_size = 0; + break; } ((struct kinetis_flash_bank *) bank->driver_priv)->nvm_start = pf_size - nvm_size; LOG_DEBUG("NVM: %d PF: %d EE: %d BL1: %d", nvm_size, pf_size, ee_size, - (sim_fcfg2 >> 23) & 1); + (sim_fcfg2 >> 23) & 1); if (pf_size != bank->size) { LOG_WARNING("flash size is different %d != %d", pf_size, - bank->size); + bank->size); } bank->num_sectors = bank->size / (2 * 1024); @@ -526,13 +508,12 @@ static int kinetis_info(struct flash_bank *bank, char *buf, int buf_size) result = kinetis_get_master_bank(bank, &master_bank); - if (result != ERROR_OK) { + if (result != ERROR_OK) return result; - } snprintf(buf, buf_size, - "%s driver for flash bank %s at 0x%8.8" PRIx32 "", - bank->driver->name, master_bank->name, master_bank->base); + "%s driver for flash bank %s at 0x%8.8" PRIx32 "", + bank->driver->name, master_bank->name, master_bank->base); return ERROR_OK; } @@ -551,15 +532,14 @@ static int kinetis_blank_check(struct flash_bank *bank) result = kinetis_get_master_bank(bank, &master_bank); - if (result != ERROR_OK) { + if (result != ERROR_OK) return result; - } return ERROR_OK; } static int kinetis_flash_read(struct flash_bank *bank, - uint8_t * buffer, uint32_t offset, uint32_t count) + uint8_t *buffer, uint32_t offset, uint32_t count) { int result; struct flash_bank *master_bank; @@ -573,9 +553,8 @@ static int kinetis_flash_read(struct flash_bank *bank, result = kinetis_get_master_bank(bank, &master_bank); - if (result != ERROR_OK) { + if (result != ERROR_OK) return result; - } return ERROR_OK; } diff --git a/src/flash/nor/lpc2000.c b/src/flash/nor/lpc2000.c index b9b04fef..04b5bfd1 100644 --- a/src/flash/nor/lpc2000.c +++ b/src/flash/nor/lpc2000.c @@ -61,15 +61,13 @@ * - 176x (tested with LPC1768) */ -typedef enum -{ +typedef enum { lpc2000_v1, lpc2000_v2, lpc1700 } lpc2000_variant; -struct lpc2000_flash_bank -{ +struct lpc2000_flash_bank { lpc2000_variant variant; struct working_area *iap_working_area; uint32_t cclk; @@ -81,8 +79,7 @@ struct lpc2000_flash_bank int checksum_vector; }; -enum lpc2000_status_codes -{ +enum lpc2000_status_codes { LPC2000_CMD_SUCCESS = 0, LPC2000_INVALID_COMMAND = 1, LPC2000_SRC_ADDR_ERROR = 2, @@ -114,63 +111,50 @@ static int lpc2000_build_sector_list(struct flash_bank *bank) /* default to a 4096 write buffer */ lpc2000_info->cmd51_max_buffer = 4096; - if (lpc2000_info->variant == lpc2000_v1) - { + if (lpc2000_info->variant == lpc2000_v1) { /* variant 1 has different layout for 128kb and 256kb flashes */ - if (bank->size == 128 * 1024) - { + if (bank->size == 128 * 1024) { bank->num_sectors = 16; bank->sectors = malloc(sizeof(struct flash_sector) * 16); - for (i = 0; i < 16; i++) - { + for (i = 0; i < 16; i++) { bank->sectors[i].offset = offset; bank->sectors[i].size = 8 * 1024; offset += bank->sectors[i].size; bank->sectors[i].is_erased = -1; bank->sectors[i].is_protected = 1; } - } - else if (bank->size == 256 * 1024) - { + } else if (bank->size == 256 * 1024) { bank->num_sectors = 18; bank->sectors = malloc(sizeof(struct flash_sector) * 18); - for (i = 0; i < 8; i++) - { + for (i = 0; i < 8; i++) { bank->sectors[i].offset = offset; bank->sectors[i].size = 8 * 1024; offset += bank->sectors[i].size; bank->sectors[i].is_erased = -1; bank->sectors[i].is_protected = 1; } - for (i = 8; i < 10; i++) - { + for (i = 8; i < 10; i++) { bank->sectors[i].offset = offset; bank->sectors[i].size = 64 * 1024; offset += bank->sectors[i].size; bank->sectors[i].is_erased = -1; bank->sectors[i].is_protected = 1; } - for (i = 10; i < 18; i++) - { + for (i = 10; i < 18; i++) { bank->sectors[i].offset = offset; bank->sectors[i].size = 8 * 1024; offset += bank->sectors[i].size; bank->sectors[i].is_erased = -1; bank->sectors[i].is_protected = 1; } - } - else - { + } else { LOG_ERROR("BUG: unknown bank->size encountered"); exit(-1); } - } - else if (lpc2000_info->variant == lpc2000_v2) - { + } else if (lpc2000_info->variant == lpc2000_v2) { /* variant 2 has a uniform layout, only number of sectors differs */ - switch (bank->size) - { + switch (bank->size) { case 4 * 1024: lpc2000_info->cmd51_max_buffer = 1024; bank->num_sectors = 1; @@ -209,26 +193,20 @@ static int lpc2000_build_sector_list(struct flash_bank *bank) bank->sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors); - for (i = 0; i < bank->num_sectors; i++) - { - if (i < 8) - { + for (i = 0; i < bank->num_sectors; i++) { + if (i < 8) { bank->sectors[i].offset = offset; bank->sectors[i].size = 4 * 1024; offset += bank->sectors[i].size; bank->sectors[i].is_erased = -1; bank->sectors[i].is_protected = 1; - } - else if (i < 22) - { + } else if (i < 22) { bank->sectors[i].offset = offset; bank->sectors[i].size = 32 * 1024; offset += bank->sectors[i].size; bank->sectors[i].is_erased = -1; bank->sectors[i].is_protected = 1; - } - else if (i < 28) - { + } else if (i < 28) { bank->sectors[i].offset = offset; bank->sectors[i].size = 4 * 1024; offset += bank->sectors[i].size; @@ -236,11 +214,8 @@ static int lpc2000_build_sector_list(struct flash_bank *bank) bank->sectors[i].is_protected = 1; } } - } - else if (lpc2000_info->variant == lpc1700) - { - switch(bank->size) - { + } else if (lpc2000_info->variant == lpc1700) { + switch (bank->size) { case 32 * 1024: bank->num_sectors = 8; break; @@ -249,7 +224,7 @@ static int lpc2000_build_sector_list(struct flash_bank *bank) break; case 128 * 1024: bank->num_sectors = 18; - break; + break; case 256 * 1024: bank->num_sectors = 22; break; @@ -263,18 +238,16 @@ static int lpc2000_build_sector_list(struct flash_bank *bank) bank->sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors); - for(i = 0; i < bank->num_sectors; i++) - { + for (i = 0; i < bank->num_sectors; i++) { bank->sectors[i].offset = offset; - /* sectors 0-15 are 4kB-sized, 16 and above are 32kB-sized for LPC17xx devices */ - bank->sectors[i].size = (i < 16)? 4 * 1024 : 32 * 1024; + /* sectors 0-15 are 4kB-sized, 16 and above are 32kB-sized for LPC17xx + *devices */ + bank->sectors[i].size = (i < 16) ? 4 * 1024 : 32 * 1024; offset += bank->sectors[i].size; bank->sectors[i].is_erased = -1; bank->sectors[i].is_protected = 1; } - } - else - { + } else { LOG_ERROR("BUG: unknown lpc2000_info->variant encountered"); exit(-1); } @@ -289,38 +262,37 @@ static int lpc2000_build_sector_list(struct flash_bank *bank) * 0x20 to 0x33: command result table (1+4 words) * 0x34 to 0xb3: stack (only 128b needed) */ -static int lpc2000_iap_call(struct flash_bank *bank, int code, uint32_t param_table[5], uint32_t result_table[4]) +static int lpc2000_iap_call(struct flash_bank *bank, + int code, + uint32_t param_table[5], + uint32_t result_table[4]) { int retval; struct lpc2000_flash_bank *lpc2000_info = bank->driver_priv; struct target *target = bank->target; struct mem_param mem_params[2]; struct reg_param reg_params[5]; - struct arm_algorithm armv4_5_info; /* for LPC2000 */ - struct armv7m_algorithm armv7m_info; /* for LPC1700 */ - uint32_t status_code; - uint32_t iap_entry_point = 0; /* to make compiler happier */ + struct arm_algorithm armv4_5_info; /* for LPC2000 */ + struct armv7m_algorithm armv7m_info; /* for LPC1700 */ + uint32_t status_code; + uint32_t iap_entry_point = 0; /* to make compiler happier */ /* regrab previously allocated working_area, or allocate a new one */ - if (!lpc2000_info->iap_working_area) - { + if (!lpc2000_info->iap_working_area) { uint8_t jump_gate[8]; /* make sure we have a working area */ - if (target_alloc_working_area(target, 180, &lpc2000_info->iap_working_area) != ERROR_OK) - { + if (target_alloc_working_area(target, 180, + &lpc2000_info->iap_working_area) != ERROR_OK) { LOG_ERROR("no working area specified, can't write LPC2000 internal flash"); return ERROR_FLASH_OPERATION_FAILED; } /* write IAP code to working area */ - switch(lpc2000_info->variant) - { + switch (lpc2000_info->variant) { case lpc1700: - target_buffer_set_u32(target, jump_gate, - ARMV4_5_T_BX(12)); - target_buffer_set_u32(target, jump_gate + 4, - ARMV5_T_BKPT(0)); + target_buffer_set_u32(target, jump_gate, ARMV4_5_T_BX(12)); + target_buffer_set_u32(target, jump_gate + 4, ARMV5_T_BKPT(0)); break; case lpc2000_v1: case lpc2000_v2: @@ -332,15 +304,17 @@ static int lpc2000_iap_call(struct flash_bank *bank, int code, uint32_t param_ta exit(-1); } - if ((retval = target_write_memory(target, lpc2000_info->iap_working_area->address, 4, 2, jump_gate)) != ERROR_OK) - { - LOG_ERROR("Write memory at address 0x%8.8" PRIx32 " failed (check work_area definition)", lpc2000_info->iap_working_area->address); + retval = target_write_memory(target, + lpc2000_info->iap_working_area->address, 4, 2, jump_gate); + if (retval != ERROR_OK) { + LOG_ERROR( + "Write memory at address 0x%8.8" PRIx32 " failed (check work_area definition)", + lpc2000_info->iap_working_area->address); return retval; } } - switch(lpc2000_info->variant) - { + switch (lpc2000_info->variant) { case lpc1700: armv7m_info.common_magic = ARMV7M_COMMON_MAGIC; armv7m_info.core_mode = ARMV7M_MODE_ANY; @@ -359,7 +333,8 @@ static int lpc2000_iap_call(struct flash_bank *bank, int code, uint32_t param_ta } /* command parameter table */ - init_mem_param(&mem_params[0], lpc2000_info->iap_working_area->address + 8, 6 * 4, PARAM_OUT); + init_mem_param(&mem_params[0], lpc2000_info->iap_working_area->address + 8, 6 * 4, + PARAM_OUT); target_buffer_set_u32(target, mem_params[0].value, code); target_buffer_set_u32(target, mem_params[0].value + 0x04, param_table[0]); target_buffer_set_u32(target, mem_params[0].value + 0x08, param_table[1]); @@ -371,7 +346,10 @@ static int lpc2000_iap_call(struct flash_bank *bank, int code, uint32_t param_ta buf_set_u32(reg_params[0].value, 0, 32, lpc2000_info->iap_working_area->address + 0x08); /* command result table */ - init_mem_param(&mem_params[1], lpc2000_info->iap_working_area->address + 0x20, 5 * 4, PARAM_IN); + init_mem_param(&mem_params[1], + lpc2000_info->iap_working_area->address + 0x20, + 5 * 4, + PARAM_IN); init_reg_param(®_params[1], "r1", 32, PARAM_OUT); buf_set_u32(reg_params[1].value, 0, 32, lpc2000_info->iap_working_area->address + 0x20); @@ -380,44 +358,55 @@ static int lpc2000_iap_call(struct flash_bank *bank, int code, uint32_t param_ta init_reg_param(®_params[2], "r12", 32, PARAM_OUT); buf_set_u32(reg_params[2].value, 0, 32, iap_entry_point); - switch(lpc2000_info->variant) - { + switch (lpc2000_info->variant) { case lpc1700: /* IAP stack */ init_reg_param(®_params[3], "sp", 32, PARAM_OUT); - buf_set_u32(reg_params[3].value, 0, 32, lpc2000_info->iap_working_area->address + 0xb4); + buf_set_u32(reg_params[3].value, 0, 32, + lpc2000_info->iap_working_area->address + 0xb4); /* return address */ init_reg_param(®_params[4], "lr", 32, PARAM_OUT); - buf_set_u32(reg_params[4].value, 0, 32, (lpc2000_info->iap_working_area->address + 0x04) | 1); /* bit0 of LR = 1 to return in Thumb mode */ + buf_set_u32(reg_params[4].value, 0, 32, + (lpc2000_info->iap_working_area->address + 0x04) | 1); + /* bit0 of LR = 1 to return in Thumb mode */ - target_run_algorithm(target, 2, mem_params, 5, reg_params, lpc2000_info->iap_working_area->address, 0, 10000, &armv7m_info); + target_run_algorithm(target, 2, mem_params, 5, reg_params, + lpc2000_info->iap_working_area->address, 0, 10000, &armv7m_info); break; case lpc2000_v1: case lpc2000_v2: /* IAP stack */ init_reg_param(®_params[3], "sp_svc", 32, PARAM_OUT); - buf_set_u32(reg_params[3].value, 0, 32, lpc2000_info->iap_working_area->address + 0xb4); + buf_set_u32(reg_params[3].value, 0, 32, + lpc2000_info->iap_working_area->address + 0xb4); /* return address */ init_reg_param(®_params[4], "lr_svc", 32, PARAM_OUT); - buf_set_u32(reg_params[4].value, 0, 32, lpc2000_info->iap_working_area->address + 0x04); + buf_set_u32(reg_params[4].value, 0, 32, + lpc2000_info->iap_working_area->address + 0x04); - target_run_algorithm(target, 2, mem_params, 5, reg_params, lpc2000_info->iap_working_area->address, lpc2000_info->iap_working_area->address + 0x4, 10000, &armv4_5_info); + target_run_algorithm(target, 2, mem_params, 5, reg_params, + lpc2000_info->iap_working_area->address, + lpc2000_info->iap_working_area->address + 0x4, + 10000, &armv4_5_info); break; default: LOG_ERROR("BUG: unknown lpc2000->variant encountered"); exit(-1); } - status_code = target_buffer_get_u32(target, mem_params[1].value); + status_code = target_buffer_get_u32(target, mem_params[1].value); result_table[0] = target_buffer_get_u32(target, mem_params[1].value + 0x04); result_table[1] = target_buffer_get_u32(target, mem_params[1].value + 0x08); result_table[2] = target_buffer_get_u32(target, mem_params[1].value + 0x0c); result_table[3] = target_buffer_get_u32(target, mem_params[1].value + 0x10); - LOG_DEBUG("IAP command = %i (0x%8.8" PRIx32", 0x%8.8" PRIx32", 0x%8.8" PRIx32", 0x%8.8" PRIx32", 0x%8.8" PRIx32") completed with result = %8.8" PRIx32, - code, param_table[0], param_table[1], param_table[2], param_table[3], param_table[4], status_code); + LOG_DEBUG("IAP command = %i (0x%8.8" PRIx32 ", 0x%8.8" PRIx32 + ", 0x%8.8" PRIx32 ", 0x%8.8" PRIx32 ", 0x%8.8" + PRIx32 ") completed with result = %8.8" PRIx32, + code, param_table[0], param_table[1], param_table[2], + param_table[3], param_table[4], status_code); destroy_mem_param(&mem_params[0]); destroy_mem_param(&mem_params[1]); @@ -441,14 +430,12 @@ static int lpc2000_iap_blank_check(struct flash_bank *bank, int first, int last) if ((first < 0) || (last >= bank->num_sectors)) return ERROR_FLASH_SECTOR_INVALID; - for (i = first; i <= last; i++) - { + for (i = first; i <= last; i++) { /* check single sector */ param_table[0] = param_table[1] = i; status_code = lpc2000_iap_call(bank, 53, param_table, result_table); - switch (status_code) - { + switch (status_code) { case ERROR_FLASH_OPERATION_FAILED: return ERROR_FLASH_OPERATION_FAILED; case LPC2000_CMD_SUCCESS: @@ -480,39 +467,30 @@ FLASH_BANK_COMMAND_HANDLER(lpc2000_flash_bank_command) struct lpc2000_flash_bank *lpc2000_info; if (CMD_ARGC < 8) - { return ERROR_COMMAND_SYNTAX_ERROR; - } lpc2000_info = malloc(sizeof(struct lpc2000_flash_bank)); bank->driver_priv = lpc2000_info; - if (strcmp(CMD_ARGV[6], "lpc2000_v1") == 0) - { + if (strcmp(CMD_ARGV[6], "lpc2000_v1") == 0) { lpc2000_info->variant = lpc2000_v1; lpc2000_info->cmd51_dst_boundary = 512; lpc2000_info->cmd51_can_256b = 0; lpc2000_info->cmd51_can_8192b = 1; lpc2000_info->checksum_vector = 5; - } - else if (strcmp(CMD_ARGV[6], "lpc2000_v2") == 0) - { + } else if (strcmp(CMD_ARGV[6], "lpc2000_v2") == 0) { lpc2000_info->variant = lpc2000_v2; lpc2000_info->cmd51_dst_boundary = 256; lpc2000_info->cmd51_can_256b = 1; lpc2000_info->cmd51_can_8192b = 0; lpc2000_info->checksum_vector = 5; - } - else if (strcmp(CMD_ARGV[6], "lpc1700") == 0) - { + } else if (strcmp(CMD_ARGV[6], "lpc1700") == 0) { lpc2000_info->variant = lpc1700; lpc2000_info->cmd51_dst_boundary = 256; lpc2000_info->cmd51_can_256b = 1; lpc2000_info->cmd51_can_8192b = 0; lpc2000_info->checksum_vector = 7; - } - else - { + } else { LOG_ERROR("unknown LPC2000 variant: %s", CMD_ARGV[6]); free(lpc2000_info); return ERROR_FLASH_BANK_INVALID; @@ -523,8 +501,7 @@ FLASH_BANK_COMMAND_HANDLER(lpc2000_flash_bank_command) lpc2000_info->calc_checksum = 0; lpc2000_build_sector_list(bank); - if (CMD_ARGC >= 9) - { + if (CMD_ARGC >= 9) { if (strcmp(CMD_ARGV[8], "calc_checksum") == 0) lpc2000_info->calc_checksum = 1; } @@ -539,8 +516,7 @@ static int lpc2000_erase(struct flash_bank *bank, int first, int last) uint32_t result_table[4]; int status_code; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -551,8 +527,7 @@ static int lpc2000_erase(struct flash_bank *bank, int first, int last) /* Prepare sectors */ status_code = lpc2000_iap_call(bank, 50, param_table, result_table); - switch (status_code) - { + switch (status_code) { case ERROR_FLASH_OPERATION_FAILED: return ERROR_FLASH_OPERATION_FAILED; case LPC2000_CMD_SUCCESS: @@ -567,8 +542,7 @@ static int lpc2000_erase(struct flash_bank *bank, int first, int last) /* Erase sectors */ status_code = lpc2000_iap_call(bank, 52, param_table, result_table); - switch (status_code) - { + switch (status_code) { case ERROR_FLASH_OPERATION_FAILED: return ERROR_FLASH_OPERATION_FAILED; case LPC2000_CMD_SUCCESS: @@ -606,8 +580,7 @@ static int lpc2000_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offs struct working_area *download_area; int retval = ERROR_OK; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -617,55 +590,56 @@ static int lpc2000_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offs dst_min_alignment = lpc2000_info->cmd51_dst_boundary; - if (offset % dst_min_alignment) - { - LOG_WARNING("offset 0x%" PRIx32 " breaks required alignment 0x%" PRIx32, offset, dst_min_alignment); + if (offset % dst_min_alignment) { + LOG_WARNING("offset 0x%" PRIx32 " breaks required alignment 0x%" PRIx32, + offset, + dst_min_alignment); return ERROR_FLASH_DST_BREAKS_ALIGNMENT; } - for (i = 0; i < bank->num_sectors; i++) - { + for (i = 0; i < bank->num_sectors; i++) { if (offset >= bank->sectors[i].offset) first_sector = i; - if (offset + DIV_ROUND_UP(count, dst_min_alignment) * dst_min_alignment > bank->sectors[i].offset) + if (offset + DIV_ROUND_UP(count, dst_min_alignment) + * dst_min_alignment > bank->sectors[i].offset) last_sector = i; } LOG_DEBUG("first_sector: %i, last_sector: %i", first_sector, last_sector); /* check if exception vectors should be flashed */ - if ((offset == 0) && (count >= 0x20) && lpc2000_info->calc_checksum) - { + if ((offset == 0) && (count >= 0x20) && lpc2000_info->calc_checksum) { uint32_t checksum = 0; - for (i = 0; i < 8; i++) - { - LOG_DEBUG("Vector 0x%2.2x: 0x%8.8" PRIx32, i * 4, buf_get_u32(buffer + (i * 4), 0, 32)); + for (i = 0; i < 8; i++) { + LOG_DEBUG("Vector 0x%2.2x: 0x%8.8" PRIx32, i * 4, + buf_get_u32(buffer + (i * 4), 0, 32)); if (i != lpc2000_info->checksum_vector) checksum += buf_get_u32(buffer + (i * 4), 0, 32); } checksum = 0 - checksum; LOG_DEBUG("checksum: 0x%8.8" PRIx32, checksum); - uint32_t original_value = buf_get_u32(buffer + (lpc2000_info->checksum_vector * 4), 0, 32); - if (original_value != checksum) - { - LOG_WARNING("Verification will fail since checksum in image (0x%8.8" PRIx32 ") to be written to flash is different from calculated vector checksum (0x%8.8" PRIx32 ").", - original_value, checksum); - LOG_WARNING("To remove this warning modify build tools on developer PC to inject correct LPC vector checksum."); + uint32_t original_value = buf_get_u32(buffer + + (lpc2000_info->checksum_vector * 4), 0, 32); + if (original_value != checksum) { + LOG_WARNING("Verification will fail since checksum in image (0x%8.8" PRIx32 ") " + "to be written to flash is different from calculated vector " + "checksum (0x%8.8" PRIx32 ").", original_value, checksum); + LOG_WARNING("To remove this warning modify build tools on developer PC " + "to inject correct LPC vector checksum."); } buf_set_u32(buffer + (lpc2000_info->checksum_vector * 4), 0, 32, checksum); } /* allocate a working area */ - if (target_alloc_working_area(target, lpc2000_info->cmd51_max_buffer, &download_area) != ERROR_OK) - { + if (target_alloc_working_area(target, lpc2000_info->cmd51_max_buffer, + &download_area) != ERROR_OK) { LOG_ERROR("no working area specified, can't write LPC2000 internal flash"); return ERROR_FLASH_OPERATION_FAILED; } - while (bytes_remaining > 0) - { + while (bytes_remaining > 0) { uint32_t thisrun_bytes; if (bytes_remaining >= lpc2000_info->cmd51_max_buffer) thisrun_bytes = lpc2000_info->cmd51_max_buffer; @@ -680,8 +654,7 @@ static int lpc2000_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offs param_table[0] = first_sector; param_table[1] = last_sector; status_code = lpc2000_iap_call(bank, 50, param_table, result_table); - switch (status_code) - { + switch (status_code) { case ERROR_FLASH_OPERATION_FAILED: retval = ERROR_FLASH_OPERATION_FAILED; break; @@ -700,24 +673,28 @@ static int lpc2000_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offs if (retval != ERROR_OK) break; - if (bytes_remaining >= thisrun_bytes) - { - if ((retval = target_write_buffer(bank->target, download_area->address, thisrun_bytes, buffer + bytes_written)) != ERROR_OK) - { + if (bytes_remaining >= thisrun_bytes) { + retval = target_write_buffer(bank->target, download_area->address, + thisrun_bytes, buffer + bytes_written); + if (retval != ERROR_OK) { retval = ERROR_FLASH_OPERATION_FAILED; break; } - } - else - { + } else { uint8_t *last_buffer = malloc(thisrun_bytes); memcpy(last_buffer, buffer + bytes_written, bytes_remaining); - memset(last_buffer + bytes_remaining, 0xff, thisrun_bytes - bytes_remaining); - target_write_buffer(bank->target, download_area->address, thisrun_bytes, last_buffer); + memset(last_buffer + bytes_remaining, 0xff, thisrun_bytes - + bytes_remaining); + target_write_buffer(bank->target, + download_area->address, + thisrun_bytes, + last_buffer); free(last_buffer); } - LOG_DEBUG("writing 0x%" PRIx32 " bytes to address 0x%" PRIx32 , thisrun_bytes, bank->base + offset + bytes_written); + LOG_DEBUG("writing 0x%" PRIx32 " bytes to address 0x%" PRIx32, + thisrun_bytes, + bank->base + offset + bytes_written); /* Write data */ param_table[0] = bank->base + offset + bytes_written; @@ -725,8 +702,7 @@ static int lpc2000_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offs param_table[2] = thisrun_bytes; param_table[3] = lpc2000_info->cclk; status_code = lpc2000_iap_call(bank, 51, param_table, result_table); - switch (status_code) - { + switch (status_code) { case ERROR_FLASH_OPERATION_FAILED: retval = ERROR_FLASH_OPERATION_FAILED; break; @@ -767,8 +743,7 @@ static int lpc2000_probe(struct flash_bank *bank) static int lpc2000_erase_check(struct flash_bank *bank) { - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -786,7 +761,11 @@ static int get_lpc2000_info(struct flash_bank *bank, char *buf, int buf_size) { struct lpc2000_flash_bank *lpc2000_info = bank->driver_priv; - snprintf(buf, buf_size, "lpc2000 flash driver variant: %i, clk: %" PRIi32 "kHz" , lpc2000_info->variant, lpc2000_info->cclk); + snprintf(buf, + buf_size, + "lpc2000 flash driver variant: %i, clk: %" PRIi32 "kHz", + lpc2000_info->variant, + lpc2000_info->cclk); return ERROR_OK; } @@ -798,34 +777,28 @@ COMMAND_HANDLER(lpc2000_handle_part_id_command) int status_code; if (CMD_ARGC < 1) - { return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); if (ERROR_OK != retval) return retval; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - if ((status_code = lpc2000_iap_call(bank, 54, param_table, result_table)) != 0x0) - { - if (status_code == ERROR_FLASH_OPERATION_FAILED) - { - command_print(CMD_CTX, "no sufficient working area specified, can't access LPC2000 IAP interface"); + status_code = lpc2000_iap_call(bank, 54, param_table, result_table); + if (status_code != 0x0) { + if (status_code == ERROR_FLASH_OPERATION_FAILED) { + command_print(CMD_CTX, + "no sufficient working area specified, can't access LPC2000 IAP interface"); return ERROR_OK; } command_print(CMD_CTX, "lpc2000 IAP returned status code %i", status_code); - } - else - { - command_print(CMD_CTX, "lpc2000 part id: 0x%8.8" PRIx32 , result_table[0]); - } + } else + command_print(CMD_CTX, "lpc2000 part id: 0x%8.8" PRIx32, result_table[0]); return ERROR_OK; } diff --git a/src/flash/nor/lpc288x.c b/src/flash/nor/lpc288x.c index d5fde948..2ecb5b2d 100644 --- a/src/flash/nor/lpc288x.c +++ b/src/flash/nor/lpc288x.c @@ -34,64 +34,65 @@ #include "imp.h" #include +#define LOAD_TIMER_ERASE 0 +#define LOAD_TIMER_WRITE 1 -#define LOAD_TIMER_ERASE 0 -#define LOAD_TIMER_WRITE 1 - -#define FLASH_PAGE_SIZE 512 +#define FLASH_PAGE_SIZE 512 /* LPC288X control registers */ -#define DBGU_CIDR 0x8000507C +#define DBGU_CIDR 0x8000507C /* LPC288X flash registers */ -#define F_CTRL 0x80102000 /* Flash control register R/W 0x5 */ -#define F_STAT 0x80102004 /* Flash status register RO 0x45 */ -#define F_PROG_TIME 0x80102008 /* Flash program time register R/W 0 */ -#define F_WAIT 0x80102010 /* Flash read wait state register R/W 0xC004 */ -#define F_CLK_TIME 0x8010201C /* Flash clock divider for 66 kHz generation R/W 0 */ -#define F_INTEN_CLR 0x80102FD8 /* Clear interrupt enable bits WO - */ -#define F_INTEN_SET 0x80102FDC /* Set interrupt enable bits WO - */ -#define F_INT_STAT 0x80102FE0 /* Interrupt status bits RO 0 */ -#define F_INTEN 0x80102FE4 /* Interrupt enable bits RO 0 */ -#define F_INT_CLR 0x80102FE8 /* Clear interrupt status bits WO */ -#define F_INT_SET 0x80102FEC /* Set interrupt status bits WO - */ -#define FLASH_PD 0x80005030 /* Allows turning off the Flash memory for power savings. R/W 1*/ -#define FLASH_INIT 0x80005034 /* Monitors Flash readiness, such as recovery from Power Down mode. R/W -*/ +#define F_CTRL 0x80102000 /* Flash control register R/W 0x5 */ +#define F_STAT 0x80102004 /* Flash status register RO 0x45 */ +#define F_PROG_TIME 0x80102008 /* Flash program time register R/W 0 */ +#define F_WAIT 0x80102010 /* Flash read wait state register R/W 0xC004 */ +#define F_CLK_TIME 0x8010201C /* Flash clock divider for 66 kHz generation R/W 0 + **/ +#define F_INTEN_CLR 0x80102FD8 /* Clear interrupt enable bits WO - */ +#define F_INTEN_SET 0x80102FDC /* Set interrupt enable bits WO - */ +#define F_INT_STAT 0x80102FE0 /* Interrupt status bits RO 0 */ +#define F_INTEN 0x80102FE4 /* Interrupt enable bits RO 0 */ +#define F_INT_CLR 0x80102FE8 /* Clear interrupt status bits WO */ +#define F_INT_SET 0x80102FEC /* Set interrupt status bits WO - */ +#define FLASH_PD 0x80005030 /* Allows turning off the Flash memory for power + *savings. R/W 1*/ +#define FLASH_INIT 0x80005034 /* Monitors Flash readiness, such as recovery from + *Power Down mode. R/W -*/ /* F_CTRL bits */ -#define FC_CS 0x0001 -#define FC_FUNC 0x0002 -#define FC_WEN 0x0004 -#define FC_RD_LATCH 0x0020 -#define FC_PROTECT 0x0080 -#define FC_SET_DATA 0x0400 -#define FC_RSSL 0x0800 -#define FC_PROG_REQ 0x1000 -#define FC_CLR_BUF 0x4000 -#define FC_LOAD_REQ 0x8000 +#define FC_CS 0x0001 +#define FC_FUNC 0x0002 +#define FC_WEN 0x0004 +#define FC_RD_LATCH 0x0020 +#define FC_PROTECT 0x0080 +#define FC_SET_DATA 0x0400 +#define FC_RSSL 0x0800 +#define FC_PROG_REQ 0x1000 +#define FC_CLR_BUF 0x4000 +#define FC_LOAD_REQ 0x8000 /* F_STAT bits */ -#define FS_DONE 0x0001 -#define FS_PROGGNT 0x0002 -#define FS_RDY 0x0004 -#define FS_ERR 0x0020 +#define FS_DONE 0x0001 +#define FS_PROGGNT 0x0002 +#define FS_RDY 0x0004 +#define FS_ERR 0x0020 /* F_PROG_TIME */ -#define FPT_TIME_MASK 0x7FFF +#define FPT_TIME_MASK 0x7FFF -#define FPT_ENABLE 0x8000 +#define FPT_ENABLE 0x8000 /* F_WAIT */ -#define FW_WAIT_STATES_MASK 0x00FF -#define FW_SET_MASK 0xC000 +#define FW_WAIT_STATES_MASK 0x00FF +#define FW_SET_MASK 0xC000 /* F_CLK_TIME */ #define FCT_CLK_DIV_MASK 0x0FFF -struct lpc288x_flash_bank -{ +struct lpc288x_flash_bank { uint32_t working_area; uint32_t working_area_size; /* chip id register */ uint32_t cidr; - const char * target_name; + const char *target_name; uint32_t cclk; uint32_t sector_size_break; @@ -106,15 +107,13 @@ static uint32_t lpc288x_wait_status_busy(struct flash_bank *bank, int timeout) { uint32_t status; struct target *target = bank->target; - do - { + do { alive_sleep(1); timeout--; target_read_u32(target, F_STAT, &status); } while (((status & FS_DONE) == 0) && timeout); - if (timeout == 0) - { + if (timeout == 0) { LOG_DEBUG("Timedout!"); return ERROR_FLASH_OPERATION_FAILED; } @@ -132,14 +131,14 @@ static int lpc288x_read_part_info(struct flash_bank *bank) uint32_t offset; if (lpc288x_info->cidr == 0x0102100A) - return ERROR_OK; /* already probed, multiple probes may cause memory leak, not allowed */ + return ERROR_OK;/* already probed, multiple probes may cause memory leak, not + *allowed */ /* Read and parse chip identification register */ target_read_u32(target, DBGU_CIDR, &cidr); - if (cidr != 0x0102100A) - { - LOG_WARNING("Cannot identify target as an LPC288X (%08" PRIx32 ")",cidr); + if (cidr != 0x0102100A) { + LOG_WARNING("Cannot identify target as an LPC288X (%08" PRIx32 ")", cidr); return ERROR_FLASH_OPERATION_FAILED; } @@ -152,16 +151,14 @@ static int lpc288x_read_part_info(struct flash_bank *bank) bank->num_sectors = 23; bank->sectors = malloc(sizeof(struct flash_sector) * 23); - for (i = 0; i < 15; i++) - { + for (i = 0; i < 15; i++) { bank->sectors[i].offset = offset; bank->sectors[i].size = 64 * 1024; offset += bank->sectors[i].size; bank->sectors[i].is_erased = -1; bank->sectors[i].is_protected = 1; } - for (i = 15; i < 23; i++) - { + for (i = 15; i < 23; i++) { bank->sectors[i].offset = offset; bank->sectors[i].size = 8 * 1024; offset += bank->sectors[i].size; @@ -183,9 +180,7 @@ FLASH_BANK_COMMAND_HANDLER(lpc288x_flash_bank_command) struct lpc288x_flash_bank *lpc288x_info; if (CMD_ARGC < 6) - { return ERROR_COMMAND_SYNTAX_ERROR; - } lpc288x_info = malloc(sizeof(struct lpc288x_flash_bank)); bank->driver_priv = lpc288x_info; @@ -220,25 +215,18 @@ static void lpc288x_set_flash_clk(struct flash_bank *bank) static void lpc288x_load_timer(int erase, struct target *target) { if (erase == LOAD_TIMER_ERASE) - { target_write_u32(target, F_PROG_TIME, FPT_ENABLE | 9500); - } else - { target_write_u32(target, F_PROG_TIME, FPT_ENABLE | 75); - } } static uint32_t lpc288x_system_ready(struct flash_bank *bank) { struct lpc288x_flash_bank *lpc288x_info = bank->driver_priv; if (lpc288x_info->cidr == 0) - { return ERROR_FLASH_BANK_NOT_PROBED; - } - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -248,8 +236,7 @@ static uint32_t lpc288x_system_ready(struct flash_bank *bank) static int lpc288x_erase_check(struct flash_bank *bank) { uint32_t status = lpc288x_system_ready(bank); /* probed? halted? */ - if (status != ERROR_OK) - { + if (status != ERROR_OK) { LOG_INFO("Processor not halted/not probed"); return status; } @@ -263,14 +250,11 @@ static int lpc288x_erase(struct flash_bank *bank, int first, int last) int sector; struct target *target = bank->target; - status = lpc288x_system_ready(bank); /* probed? halted? */ + status = lpc288x_system_ready(bank); /* probed? halted? */ if (status != ERROR_OK) - { return status; - } - if ((first < 0) || (last < first) || (last >= bank->num_sectors)) - { + if ((first < 0) || (last < first) || (last >= bank->num_sectors)) { LOG_INFO("Bad sector range"); return ERROR_FLASH_SECTOR_INVALID; } @@ -278,30 +262,25 @@ static int lpc288x_erase(struct flash_bank *bank, int first, int last) /* Configure the flash controller timing */ lpc288x_set_flash_clk(bank); - for (sector = first; sector <= last; sector++) - { + for (sector = first; sector <= last; sector++) { if (lpc288x_wait_status_busy(bank, 1000) != ERROR_OK) - { return ERROR_FLASH_OPERATION_FAILED; - } - lpc288x_load_timer(LOAD_TIMER_ERASE,target); + lpc288x_load_timer(LOAD_TIMER_ERASE, target); target_write_u32(target, bank->sectors[sector].offset, 0x00); target_write_u32(target, F_CTRL, FC_PROG_REQ | FC_PROTECT | FC_CS); } if (lpc288x_wait_status_busy(bank, 1000) != ERROR_OK) - { return ERROR_FLASH_OPERATION_FAILED; - } return ERROR_OK; } static int lpc288x_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, uint32_t count) { uint8_t page_buffer[FLASH_PAGE_SIZE]; - uint32_t status, source_offset,dest_offset; + uint32_t status, source_offset, dest_offset; struct target *target = bank->target; uint32_t bytes_remaining = count; uint32_t first_sector, last_sector, sector, page; @@ -310,39 +289,34 @@ static int lpc288x_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offs /* probed? halted? */ status = lpc288x_system_ready(bank); if (status != ERROR_OK) - { return status; - } /* Initialise search indices */ first_sector = last_sector = 0xffffffff; /* validate the write range... */ - for (i = 0; i < bank->num_sectors; i++) - { + for (i = 0; i < bank->num_sectors; i++) { if ((offset >= bank->sectors[i].offset) && - (offset < (bank->sectors[i].offset + bank->sectors[i].size)) && - (first_sector == 0xffffffff)) - { + (offset < (bank->sectors[i].offset + bank->sectors[i].size)) && + (first_sector == 0xffffffff)) { first_sector = i; /* all writes must start on a sector boundary... */ - if (offset % bank->sectors[i].size) - { - LOG_INFO("offset 0x%" PRIx32 " breaks required alignment 0x%" PRIx32 "", offset, bank->sectors[i].size); + if (offset % bank->sectors[i].size) { + LOG_INFO( + "offset 0x%" PRIx32 " breaks required alignment 0x%" PRIx32 "", + offset, + bank->sectors[i].size); return ERROR_FLASH_DST_BREAKS_ALIGNMENT; } } if (((offset + count) > bank->sectors[i].offset) && - ((offset + count) <= (bank->sectors[i].offset + bank->sectors[i].size)) && - (last_sector == 0xffffffff)) - { + ((offset + count) <= (bank->sectors[i].offset + bank->sectors[i].size)) && + (last_sector == 0xffffffff)) last_sector = i; - } } /* Range check... */ - if (first_sector == 0xffffffff || last_sector == 0xffffffff) - { + if (first_sector == 0xffffffff || last_sector == 0xffffffff) { LOG_INFO("Range check failed %" PRIx32 " %" PRIx32 "", offset, count); return ERROR_FLASH_DST_OUT_OF_BANK; } @@ -354,32 +328,23 @@ static int lpc288x_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offs source_offset = 0; dest_offset = 0; - for (sector = first_sector; sector <= last_sector; sector++) - { - for (page = 0; page < bank->sectors[sector].size / FLASH_PAGE_SIZE; page++) - { - if (bytes_remaining == 0) - { + for (sector = first_sector; sector <= last_sector; sector++) { + for (page = 0; page < bank->sectors[sector].size / FLASH_PAGE_SIZE; page++) { + if (bytes_remaining == 0) { count = 0; memset(page_buffer, 0xFF, FLASH_PAGE_SIZE); - } - else if (bytes_remaining < FLASH_PAGE_SIZE) - { + } else if (bytes_remaining < FLASH_PAGE_SIZE) { count = bytes_remaining; memset(page_buffer, 0xFF, FLASH_PAGE_SIZE); memcpy(page_buffer, &buffer[source_offset], count); - } - else - { + } else { count = FLASH_PAGE_SIZE; memcpy(page_buffer, &buffer[source_offset], count); } /* Wait for flash to become ready */ if (lpc288x_wait_status_busy(bank, 1000) != ERROR_OK) - { return ERROR_FLASH_OPERATION_FAILED; - } /* fill flash data latches with 1's */ target_write_u32(target, F_CTRL, FC_CS | FC_SET_DATA | FC_WEN | FC_FUNC); @@ -389,14 +354,14 @@ static int lpc288x_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offs * it seems not to be a LOT slower.... * bulk_write_memory() is no quicker :(*/ #if 1 - if (target_write_memory(target, offset + dest_offset, 4, 128, page_buffer) != ERROR_OK) - { + if (target_write_memory(target, offset + dest_offset, 4, 128, + page_buffer) != ERROR_OK) { LOG_ERROR("Write failed s %" PRIx32 " p %" PRIx32 "", sector, page); return ERROR_FLASH_OPERATION_FAILED; } #else - if (target_write_buffer(target, offset + dest_offset, FLASH_PAGE_SIZE, page_buffer) != ERROR_OK) - { + if (target_write_buffer(target, offset + dest_offset, FLASH_PAGE_SIZE, + page_buffer) != ERROR_OK) { LOG_INFO("Write to flash buffer failed"); return ERROR_FLASH_OPERATION_FAILED; } @@ -407,7 +372,8 @@ static int lpc288x_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offs lpc288x_load_timer(LOAD_TIMER_WRITE, target); - target_write_u32(target, F_CTRL, FC_PROG_REQ | FC_PROTECT | FC_FUNC | FC_CS); + target_write_u32(target, F_CTRL, FC_PROG_REQ | FC_PROTECT | FC_FUNC | + FC_CS); } } @@ -421,12 +387,9 @@ static int lpc288x_probe(struct flash_bank *bank) int retval; if (lpc288x_info->cidr != 0) - { - return ERROR_OK; /* already probed */ - } + return ERROR_OK;/* already probed */ - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -452,32 +415,25 @@ static int lpc288x_protect(struct flash_bank *bank, int set, int first, int last /* probed? halted? */ status = lpc288x_system_ready(bank); if (status != ERROR_OK) - { return status; - } if ((first < 0) || (last < first) || (last >= bank->num_sectors)) - { return ERROR_FLASH_SECTOR_INVALID; - } /* Configure the flash controller timing */ lpc288x_set_flash_clk(bank); - for (lockregion = first; lockregion <= last; lockregion++) - { - if (set) - { + for (lockregion = first; lockregion <= last; lockregion++) { + if (set) { /* write an odd value to base addy to protect... */ value = 0x01; - } - else - { + } else { /* write an even value to base addy to unprotect... */ value = 0x00; } target_write_u32(target, bank->sectors[lockregion].offset, value); - target_write_u32(target, F_CTRL, FC_LOAD_REQ | FC_PROTECT | FC_WEN | FC_FUNC | FC_CS); + target_write_u32(target, F_CTRL, FC_LOAD_REQ | FC_PROTECT | FC_WEN | FC_FUNC | + FC_CS); } return ERROR_OK; diff --git a/src/flash/nor/lpc2900.c b/src/flash/nor/lpc2900.c index 5a80b323..f6a981dd 100644 --- a/src/flash/nor/lpc2900.c +++ b/src/flash/nor/lpc2900.c @@ -22,62 +22,60 @@ #include "config.h" #endif - #include "imp.h" #include #include #include #include - /* 1024 bytes */ #define KiB 1024 /* Some flash constants */ -#define FLASH_PAGE_SIZE 512 /* bytes */ -#define FLASH_ERASE_TIME 100000 /* microseconds */ -#define FLASH_PROGRAM_TIME 1000 /* microseconds */ +#define FLASH_PAGE_SIZE 512 /* bytes */ +#define FLASH_ERASE_TIME 100000 /* microseconds */ +#define FLASH_PROGRAM_TIME 1000 /* microseconds */ /* Chip ID / Feature Registers */ -#define CHIPID 0xE0000000 /* Chip ID */ -#define FEAT0 0xE0000100 /* Chip feature 0 */ -#define FEAT1 0xE0000104 /* Chip feature 1 */ -#define FEAT2 0xE0000108 /* Chip feature 2 (contains flash size indicator) */ -#define FEAT3 0xE000010C /* Chip feature 3 */ +#define CHIPID 0xE0000000 /* Chip ID */ +#define FEAT0 0xE0000100 /* Chip feature 0 */ +#define FEAT1 0xE0000104 /* Chip feature 1 */ +#define FEAT2 0xE0000108 /* Chip feature 2 (contains flash size indicator) */ +#define FEAT3 0xE000010C /* Chip feature 3 */ -#define EXPECTED_CHIPID 0x209CE02B /* Chip ID of all LPC2900 devices */ +#define EXPECTED_CHIPID 0x209CE02B /* Chip ID of all LPC2900 devices */ /* Flash/EEPROM Control Registers */ -#define FCTR 0x20200000 /* Flash control */ -#define FPTR 0x20200008 /* Flash program-time */ -#define FTCTR 0x2020000C /* Flash test control */ -#define FBWST 0x20200010 /* Flash bridge wait-state */ -#define FCRA 0x2020001C /* Flash clock divider */ -#define FMSSTART 0x20200020 /* Flash Built-In Selft Test start address */ -#define FMSSTOP 0x20200024 /* Flash Built-In Selft Test stop address */ -#define FMS16 0x20200028 /* Flash 16-bit signature */ -#define FMSW0 0x2020002C /* Flash 128-bit signature Word 0 */ -#define FMSW1 0x20200030 /* Flash 128-bit signature Word 1 */ -#define FMSW2 0x20200034 /* Flash 128-bit signature Word 2 */ -#define FMSW3 0x20200038 /* Flash 128-bit signature Word 3 */ - -#define EECMD 0x20200080 /* EEPROM command */ -#define EEADDR 0x20200084 /* EEPROM address */ -#define EEWDATA 0x20200088 /* EEPROM write data */ -#define EERDATA 0x2020008C /* EEPROM read data */ -#define EEWSTATE 0x20200090 /* EEPROM wait state */ -#define EECLKDIV 0x20200094 /* EEPROM clock divider */ -#define EEPWRDWN 0x20200098 /* EEPROM power-down/start */ -#define EEMSSTART 0x2020009C /* EEPROM BIST start address */ -#define EEMSSTOP 0x202000A0 /* EEPROM BIST stop address */ -#define EEMSSIG 0x202000A4 /* EEPROM 24-bit BIST signature */ - -#define INT_CLR_ENABLE 0x20200FD8 /* Flash/EEPROM interrupt clear enable */ -#define INT_SET_ENABLE 0x20200FDC /* Flash/EEPROM interrupt set enable */ -#define INT_STATUS 0x20200FE0 /* Flash/EEPROM interrupt status */ -#define INT_ENABLE 0x20200FE4 /* Flash/EEPROM interrupt enable */ -#define INT_CLR_STATUS 0x20200FE8 /* Flash/EEPROM interrupt clear status */ -#define INT_SET_STATUS 0x20200FEC /* Flash/EEPROM interrupt set status */ +#define FCTR 0x20200000 /* Flash control */ +#define FPTR 0x20200008 /* Flash program-time */ +#define FTCTR 0x2020000C /* Flash test control */ +#define FBWST 0x20200010 /* Flash bridge wait-state */ +#define FCRA 0x2020001C /* Flash clock divider */ +#define FMSSTART 0x20200020 /* Flash Built-In Selft Test start address */ +#define FMSSTOP 0x20200024 /* Flash Built-In Selft Test stop address */ +#define FMS16 0x20200028 /* Flash 16-bit signature */ +#define FMSW0 0x2020002C /* Flash 128-bit signature Word 0 */ +#define FMSW1 0x20200030 /* Flash 128-bit signature Word 1 */ +#define FMSW2 0x20200034 /* Flash 128-bit signature Word 2 */ +#define FMSW3 0x20200038 /* Flash 128-bit signature Word 3 */ + +#define EECMD 0x20200080 /* EEPROM command */ +#define EEADDR 0x20200084 /* EEPROM address */ +#define EEWDATA 0x20200088 /* EEPROM write data */ +#define EERDATA 0x2020008C /* EEPROM read data */ +#define EEWSTATE 0x20200090 /* EEPROM wait state */ +#define EECLKDIV 0x20200094 /* EEPROM clock divider */ +#define EEPWRDWN 0x20200098 /* EEPROM power-down/start */ +#define EEMSSTART 0x2020009C /* EEPROM BIST start address */ +#define EEMSSTOP 0x202000A0 /* EEPROM BIST stop address */ +#define EEMSSIG 0x202000A4 /* EEPROM 24-bit BIST signature */ + +#define INT_CLR_ENABLE 0x20200FD8 /* Flash/EEPROM interrupt clear enable */ +#define INT_SET_ENABLE 0x20200FDC /* Flash/EEPROM interrupt set enable */ +#define INT_STATUS 0x20200FE0 /* Flash/EEPROM interrupt status */ +#define INT_ENABLE 0x20200FE4 /* Flash/EEPROM interrupt enable */ +#define INT_CLR_STATUS 0x20200FE8 /* Flash/EEPROM interrupt clear status */ +#define INT_SET_STATUS 0x20200FEC /* Flash/EEPROM interrupt set status */ /* Interrupt sources */ #define INTSRC_END_OF_PROG (1 << 28) @@ -87,7 +85,6 @@ #define INTSRC_END_OF_BURN (1 << 1) #define INTSRC_END_OF_ERASE (1 << 0) - /* FCTR bits */ #define FCTR_FS_LOADREQ (1 << 15) #define FCTR_FS_CACHECLR (1 << 14) @@ -124,13 +121,10 @@ #define ISS_CUSTOMER_NWORDS2 (ISS_CUSTOMER_SIZE2 / 4) #define ISS_CUSTOMER_SIZE (ISS_CUSTOMER_SIZE1 + ISS_CUSTOMER_SIZE2) - - /** * Private data for \c lpc2900 flash driver. */ -struct lpc2900_flash_bank -{ +struct lpc2900_flash_bank { /** * This flag is set when the device has been successfully probed. */ @@ -149,7 +143,7 @@ struct lpc2900_flash_bank * This string is set by the probe function to the type number of the * device. It takes the form "LPC29xx". */ - char * target_name; + char *target_name; /** * System clock frequency. @@ -175,21 +169,18 @@ struct lpc2900_flash_bank }; - static uint32_t lpc2900_wait_status(struct flash_bank *bank, uint32_t mask, int timeout); static void lpc2900_setup(struct flash_bank *bank); static uint32_t lpc2900_is_ready(struct flash_bank *bank); static uint32_t lpc2900_read_security_status(struct flash_bank *bank); static uint32_t lpc2900_run_bist128(struct flash_bank *bank, - uint32_t addr_from, uint32_t addr_to, - uint32_t (*signature)[4] ); + uint32_t addr_from, uint32_t addr_to, + uint32_t (*signature)[4]); static uint32_t lpc2900_address2sector(struct flash_bank *bank, uint32_t offset); static uint32_t lpc2900_calc_tr(uint32_t clock_var, uint32_t time_var); - /*********************** Helper functions **************************/ - /** * Wait for an event in mask to occur in INT_STATUS. * @@ -199,24 +190,20 @@ static uint32_t lpc2900_calc_tr(uint32_t clock_var, uint32_t time_var); * @param[in] mask Mask to be used for INT_STATUS * @param[in] timeout Timeout in ms */ -static uint32_t lpc2900_wait_status( struct flash_bank *bank, - uint32_t mask, - int timeout ) +static uint32_t lpc2900_wait_status(struct flash_bank *bank, + uint32_t mask, + int timeout) { uint32_t int_status; struct target *target = bank->target; - - do - { + do { alive_sleep(1); timeout--; target_read_u32(target, INT_STATUS, &int_status); - } - while( ((int_status & mask) == 0) && (timeout != 0) ); + } while (((int_status & mask) == 0) && (timeout != 0)); - if (timeout == 0) - { + if (timeout == 0) { LOG_DEBUG("Timeout!"); return ERROR_FLASH_OPERATION_FAILED; } @@ -224,8 +211,6 @@ static uint32_t lpc2900_wait_status( struct flash_bank *bank, return ERROR_OK; } - - /** * Set up the flash for erase/program operations. * @@ -233,22 +218,18 @@ static uint32_t lpc2900_wait_status( struct flash_bank *bank, * * @param bank Pointer to the flash bank descriptor */ -static void lpc2900_setup( struct flash_bank *bank ) +static void lpc2900_setup(struct flash_bank *bank) { uint32_t fcra; struct lpc2900_flash_bank *lpc2900_info = bank->driver_priv; - /* Power up the flash block */ - target_write_u32( bank->target, FCTR, FCTR_FS_WEB | FCTR_FS_CS ); - + target_write_u32(bank->target, FCTR, FCTR_FS_WEB | FCTR_FS_CS); fcra = (lpc2900_info->clk_sys_fmc / (3 * 66000)) - 1; - target_write_u32( bank->target, FCRA, fcra ); + target_write_u32(bank->target, FCRA, fcra); } - - /** * Check if device is ready. * @@ -256,37 +237,31 @@ static void lpc2900_setup( struct flash_bank *bank ) * Must have been successfully probed. * Must be halted. */ -static uint32_t lpc2900_is_ready( struct flash_bank *bank ) +static uint32_t lpc2900_is_ready(struct flash_bank *bank) { struct lpc2900_flash_bank *lpc2900_info = bank->driver_priv; - if( !lpc2900_info->is_probed ) - { + if (!lpc2900_info->is_probed) return ERROR_FLASH_BANK_NOT_PROBED; - } - if( bank->target->state != TARGET_HALTED ) - { - LOG_ERROR( "Target not halted" ); + if (bank->target->state != TARGET_HALTED) { + LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } return ERROR_OK; } - /** * Read the status of sector security from the index sector. * * @param bank Pointer to the flash bank descriptor */ -static uint32_t lpc2900_read_security_status( struct flash_bank *bank ) +static uint32_t lpc2900_read_security_status(struct flash_bank *bank) { - uint32_t status; - if( (status = lpc2900_is_ready( bank )) != ERROR_OK ) - { + uint32_t status = lpc2900_is_ready(bank); + if (status != ERROR_OK) return status; - } struct target *target = bank->target; @@ -294,9 +269,9 @@ static uint32_t lpc2900_read_security_status( struct flash_bank *bank ) target_write_u32(target, FCTR, FCTR_FS_CS | FCTR_FS_WEB | FCTR_FS_ISS); /* Read the relevant block of memory from the ISS sector */ - uint32_t iss_secured_field[ 0x230/16 ][ 4 ]; + uint32_t iss_secured_field[0x230/16][4]; target_read_memory(target, bank->base + 0xC00, 4, 0x230/4, - (uint8_t *)iss_secured_field); + (uint8_t *)iss_secured_field); /* Disable ISS access */ target_write_u32(target, FCTR, FCTR_FS_CS | FCTR_FS_WEB); @@ -312,47 +287,33 @@ static uint32_t lpc2900_read_security_status( struct flash_bank *bank ) */ int sector; int index_t; - for( sector = 0; sector < bank->num_sectors; sector++ ) - { + for (sector = 0; sector < bank->num_sectors; sector++) { /* Convert logical sector number to physical sector number */ - if( sector <= 4 ) - { + if (sector <= 4) index_t = sector + 11; - } - else if( sector <= 7 ) - { + else if (sector <= 7) index_t = sector + 27; - } else - { index_t = sector - 8; - } bank->sectors[sector].is_protected = -1; - if ( - (iss_secured_field[index_t][0] == 0x00000000) && - (iss_secured_field[index_t][1] == 0x00000000) && - (iss_secured_field[index_t][2] == 0x00000000) && - (iss_secured_field[index_t][3] == 0x00000000) ) - { + if ((iss_secured_field[index_t][0] == 0x00000000) && + (iss_secured_field[index_t][1] == 0x00000000) && + (iss_secured_field[index_t][2] == 0x00000000) && + (iss_secured_field[index_t][3] == 0x00000000)) bank->sectors[sector].is_protected = 1; - } - if ( - (iss_secured_field[index_t][0] == 0xFFFFFFFF) && - (iss_secured_field[index_t][1] == 0xFFFFFFFF) && - (iss_secured_field[index_t][2] == 0xFFFFFFFF) && - (iss_secured_field[index_t][3] == 0xFFFFFFFF) ) - { + if ((iss_secured_field[index_t][0] == 0xFFFFFFFF) && + (iss_secured_field[index_t][1] == 0xFFFFFFFF) && + (iss_secured_field[index_t][2] == 0xFFFFFFFF) && + (iss_secured_field[index_t][3] == 0xFFFFFFFF)) bank->sectors[sector].is_protected = 0; - } } return ERROR_OK; } - /** * Use BIST to calculate a 128-bit hash value over a range of flash. * @@ -362,33 +323,30 @@ static uint32_t lpc2900_read_security_status( struct flash_bank *bank ) * @param signature */ static uint32_t lpc2900_run_bist128(struct flash_bank *bank, - uint32_t addr_from, - uint32_t addr_to, - uint32_t (*signature)[4] ) + uint32_t addr_from, + uint32_t addr_to, + uint32_t (*signature)[4]) { struct target *target = bank->target; /* Clear END_OF_MISR interrupt status */ - target_write_u32( target, INT_CLR_STATUS, INTSRC_END_OF_MISR ); + target_write_u32(target, INT_CLR_STATUS, INTSRC_END_OF_MISR); /* Start address */ - target_write_u32( target, FMSSTART, addr_from >> 4); + target_write_u32(target, FMSSTART, addr_from >> 4); /* End address, and issue start command */ - target_write_u32( target, FMSSTOP, (addr_to >> 4) | FMSSTOP_MISR_START ); + target_write_u32(target, FMSSTOP, (addr_to >> 4) | FMSSTOP_MISR_START); /* Poll for end of operation. Calculate a reasonable timeout. */ - if( lpc2900_wait_status( bank, INTSRC_END_OF_MISR, 1000 ) != ERROR_OK ) - { + if (lpc2900_wait_status(bank, INTSRC_END_OF_MISR, 1000) != ERROR_OK) return ERROR_FLASH_OPERATION_FAILED; - } /* Return the signature */ - target_read_memory( target, FMSW0, 4, 4, (uint8_t *)signature ); + target_read_memory(target, FMSW0, 4, 4, (uint8_t *)signature); return ERROR_OK; } - /** * Return sector number for given address. * @@ -398,30 +356,23 @@ static uint32_t lpc2900_run_bist128(struct flash_bank *bank, * @param bank Pointer to the flash bank descriptor * @param offset Offset address relative to bank start */ -static uint32_t lpc2900_address2sector( struct flash_bank *bank, - uint32_t offset ) +static uint32_t lpc2900_address2sector(struct flash_bank *bank, + uint32_t offset) { uint32_t address = bank->base + offset; - /* Run through all sectors of this bank */ int sector; - for( sector = 0; sector < bank->num_sectors; sector++ ) - { + for (sector = 0; sector < bank->num_sectors; sector++) { /* Return immediately if address is within the current sector */ - if( address < (bank->sectors[sector].offset + bank->sectors[sector].size) ) - { + if (address < (bank->sectors[sector].offset + bank->sectors[sector].size)) return sector; - } } /* We should never come here. If we do, return an arbitrary sector number. */ return 0; } - - - /** * Write one page to the index sector. * @@ -429,22 +380,20 @@ static uint32_t lpc2900_address2sector( struct flash_bank *bank, * @param pagenum Page number (0...7) * @param page Page array (FLASH_PAGE_SIZE bytes) */ -static int lpc2900_write_index_page( struct flash_bank *bank, - int pagenum, - uint8_t (*page)[FLASH_PAGE_SIZE] ) +static int lpc2900_write_index_page(struct flash_bank *bank, + int pagenum, + uint8_t (*page)[FLASH_PAGE_SIZE]) { /* Only pages 4...7 are user writable */ - if ((pagenum < 4) || (pagenum > 7)) - { + if ((pagenum < 4) || (pagenum > 7)) { LOG_ERROR("Refuse to burn index sector page %d", pagenum); return ERROR_COMMAND_ARGUMENT_INVALID; } /* Get target, and check if it's halted */ struct target *target = bank->target; - if( target->state != TARGET_HALTED ) - { - LOG_ERROR( "Target not halted" ); + if (target->state != TARGET_HALTED) { + LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -452,67 +401,63 @@ static int lpc2900_write_index_page( struct flash_bank *bank, struct lpc2900_flash_bank *lpc2900_info = bank->driver_priv; /* Enable flash block and set the correct CRA clock of 66 kHz */ - lpc2900_setup( bank ); + lpc2900_setup(bank); /* Un-protect the index sector */ - target_write_u32( target, bank->base, 0 ); - target_write_u32( target, FCTR, - FCTR_FS_LOADREQ | FCTR_FS_WPB | FCTR_FS_ISS | - FCTR_FS_WEB | FCTR_FS_WRE | FCTR_FS_CS ); + target_write_u32(target, bank->base, 0); + target_write_u32(target, FCTR, + FCTR_FS_LOADREQ | FCTR_FS_WPB | FCTR_FS_ISS | + FCTR_FS_WEB | FCTR_FS_WRE | FCTR_FS_CS); /* Set latch load mode */ - target_write_u32( target, FCTR, - FCTR_FS_ISS | FCTR_FS_WEB | FCTR_FS_WRE | FCTR_FS_CS ); + target_write_u32(target, FCTR, + FCTR_FS_ISS | FCTR_FS_WEB | FCTR_FS_WRE | FCTR_FS_CS); /* Write whole page to flash data latches */ - if( target_write_memory( target, - bank->base + pagenum * FLASH_PAGE_SIZE, - 4, FLASH_PAGE_SIZE / 4, (uint8_t *)page) != ERROR_OK ) - { + if (target_write_memory(target, + bank->base + pagenum * FLASH_PAGE_SIZE, + 4, FLASH_PAGE_SIZE / 4, (uint8_t *)page) != ERROR_OK) { LOG_ERROR("Index sector write failed @ page %d", pagenum); - target_write_u32( target, FCTR, FCTR_FS_CS | FCTR_FS_WEB ); + target_write_u32(target, FCTR, FCTR_FS_CS | FCTR_FS_WEB); return ERROR_FLASH_OPERATION_FAILED; } /* Clear END_OF_BURN interrupt status */ - target_write_u32( target, INT_CLR_STATUS, INTSRC_END_OF_BURN ); + target_write_u32(target, INT_CLR_STATUS, INTSRC_END_OF_BURN); /* Set the program/erase time to FLASH_PROGRAM_TIME */ target_write_u32(target, FPTR, - FPTR_EN_T | lpc2900_calc_tr( lpc2900_info->clk_sys_fmc, - FLASH_PROGRAM_TIME )); + FPTR_EN_T | lpc2900_calc_tr(lpc2900_info->clk_sys_fmc, + FLASH_PROGRAM_TIME)); /* Trigger flash write */ - target_write_u32( target, FCTR, - FCTR_FS_PROGREQ | FCTR_FS_ISS | - FCTR_FS_WPB | FCTR_FS_WRE | FCTR_FS_CS ); + target_write_u32(target, FCTR, + FCTR_FS_PROGREQ | FCTR_FS_ISS | + FCTR_FS_WPB | FCTR_FS_WRE | FCTR_FS_CS); /* Wait for the end of the write operation. If it's not over after one * second, something went dreadfully wrong... :-( */ - if (lpc2900_wait_status(bank, INTSRC_END_OF_BURN, 1000) != ERROR_OK) - { + if (lpc2900_wait_status(bank, INTSRC_END_OF_BURN, 1000) != ERROR_OK) { LOG_ERROR("Index sector write failed @ page %d", pagenum); target_write_u32(target, FCTR, FCTR_FS_CS | FCTR_FS_WEB); return ERROR_FLASH_OPERATION_FAILED; } - target_write_u32( target, FCTR, FCTR_FS_CS | FCTR_FS_WEB ); + target_write_u32(target, FCTR, FCTR_FS_CS | FCTR_FS_WEB); return ERROR_OK; } - - /** * Calculate FPTR.TR register value for desired program/erase time. * * @param clock System clock in Hz * @param time Program/erase time in µs */ -static uint32_t lpc2900_calc_tr( uint32_t clock_var, uint32_t time_var ) +static uint32_t lpc2900_calc_tr(uint32_t clock_var, uint32_t time_var) { /* ((time[µs]/1e6) * f[Hz]) + 511 * FPTR.TR = ------------------------------- @@ -524,7 +469,6 @@ static uint32_t lpc2900_calc_tr( uint32_t clock_var, uint32_t time_var ) return tr_val; } - /*********************** Private flash commands **************************/ @@ -539,44 +483,33 @@ COMMAND_HANDLER(lpc2900_handle_signature_command) uint32_t status; uint32_t signature[4]; - - if( CMD_ARGC < 1 ) - { + if (CMD_ARGC < 1) return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); if (ERROR_OK != retval) return retval; - if( bank->target->state != TARGET_HALTED ) - { - LOG_ERROR( "Target not halted" ); + if (bank->target->state != TARGET_HALTED) { + LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } /* Run BIST over whole flash range */ - if( (status = lpc2900_run_bist128( bank, - bank->base, - bank->base + (bank->size - 1), - &signature) - ) != ERROR_OK ) - { + status = lpc2900_run_bist128(bank, bank->base, bank->base + (bank->size - 1), &signature); + if (status != ERROR_OK) return status; - } - command_print( CMD_CTX, "signature: 0x%8.8" PRIx32 - ":0x%8.8" PRIx32 - ":0x%8.8" PRIx32 - ":0x%8.8" PRIx32, - signature[3], signature[2], signature[1], signature[0] ); + command_print(CMD_CTX, "signature: 0x%8.8" PRIx32 + ":0x%8.8" PRIx32 + ":0x%8.8" PRIx32 + ":0x%8.8" PRIx32, + signature[3], signature[2], signature[1], signature[0]); return ERROR_OK; } - - /** * Store customer info in file. * @@ -585,10 +518,8 @@ COMMAND_HANDLER(lpc2900_handle_signature_command) */ COMMAND_HANDLER(lpc2900_handle_read_custom_command) { - if( CMD_ARGC < 2 ) - { + if (CMD_ARGC < 2) return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); @@ -600,66 +531,58 @@ COMMAND_HANDLER(lpc2900_handle_read_custom_command) /* Get target, and check if it's halted */ struct target *target = bank->target; - if( target->state != TARGET_HALTED ) - { - LOG_ERROR( "Target not halted" ); + if (target->state != TARGET_HALTED) { + LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } /* Storage for customer info. Read in two parts */ - uint32_t customer[ ISS_CUSTOMER_NWORDS1 + ISS_CUSTOMER_NWORDS2 ]; + uint32_t customer[ISS_CUSTOMER_NWORDS1 + ISS_CUSTOMER_NWORDS2]; /* Enable access to index sector */ - target_write_u32( target, FCTR, FCTR_FS_CS | FCTR_FS_WEB | FCTR_FS_ISS ); + target_write_u32(target, FCTR, FCTR_FS_CS | FCTR_FS_WEB | FCTR_FS_ISS); /* Read two parts */ - target_read_memory( target, bank->base+ISS_CUSTOMER_START1, 4, - ISS_CUSTOMER_NWORDS1, - (uint8_t *)&customer[0] ); - target_read_memory( target, bank->base+ISS_CUSTOMER_START2, 4, - ISS_CUSTOMER_NWORDS2, - (uint8_t *)&customer[ISS_CUSTOMER_NWORDS1] ); + target_read_memory(target, bank->base+ISS_CUSTOMER_START1, 4, + ISS_CUSTOMER_NWORDS1, + (uint8_t *)&customer[0]); + target_read_memory(target, bank->base+ISS_CUSTOMER_START2, 4, + ISS_CUSTOMER_NWORDS2, + (uint8_t *)&customer[ISS_CUSTOMER_NWORDS1]); /* Deactivate access to index sector */ - target_write_u32( target, FCTR, FCTR_FS_CS | FCTR_FS_WEB ); + target_write_u32(target, FCTR, FCTR_FS_CS | FCTR_FS_WEB); /* Try and open the file */ struct fileio fileio; const char *filename = CMD_ARGV[1]; - int ret = fileio_open( &fileio, filename, FILEIO_WRITE, FILEIO_BINARY ); - if( ret != ERROR_OK ) - { - LOG_WARNING( "Could not open file %s", filename ); + int ret = fileio_open(&fileio, filename, FILEIO_WRITE, FILEIO_BINARY); + if (ret != ERROR_OK) { + LOG_WARNING("Could not open file %s", filename); return ret; } size_t nwritten; - ret = fileio_write( &fileio, sizeof(customer), - (const uint8_t *)customer, &nwritten ); - if( ret != ERROR_OK ) - { - LOG_ERROR( "Write operation to file %s failed", filename ); - fileio_close( &fileio ); + ret = fileio_write(&fileio, sizeof(customer), + (const uint8_t *)customer, &nwritten); + if (ret != ERROR_OK) { + LOG_ERROR("Write operation to file %s failed", filename); + fileio_close(&fileio); return ret; } - fileio_close( &fileio ); + fileio_close(&fileio); return ERROR_OK; } - - - /** * Enter password to enable potentially dangerous options. */ COMMAND_HANDLER(lpc2900_handle_password_command) { if (CMD_ARGC < 2) - { return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); @@ -670,31 +593,26 @@ COMMAND_HANDLER(lpc2900_handle_password_command) #define ISS_PASSWORD "I_know_what_I_am_doing" - lpc2900_info->risky = !strcmp( CMD_ARGV[1], ISS_PASSWORD ); + lpc2900_info->risky = !strcmp(CMD_ARGV[1], ISS_PASSWORD); - if( !lpc2900_info->risky ) - { + if (!lpc2900_info->risky) { command_print(CMD_CTX, "Wrong password (use '%s')", ISS_PASSWORD); return ERROR_COMMAND_ARGUMENT_INVALID; } command_print(CMD_CTX, - "Potentially dangerous operation allowed in next command!"); + "Potentially dangerous operation allowed in next command!"); return ERROR_OK; } - - /** * Write customer info from file to the index sector. */ COMMAND_HANDLER(lpc2900_handle_write_custom_command) { if (CMD_ARGC < 2) - { return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); @@ -704,17 +622,15 @@ COMMAND_HANDLER(lpc2900_handle_write_custom_command) struct lpc2900_flash_bank *lpc2900_info = bank->driver_priv; /* Check if command execution is allowed. */ - if( !lpc2900_info->risky ) - { - command_print( CMD_CTX, "Command execution not allowed!" ); + if (!lpc2900_info->risky) { + command_print(CMD_CTX, "Command execution not allowed!"); return ERROR_COMMAND_ARGUMENT_INVALID; } lpc2900_info->risky = 0; /* Get target, and check if it's halted */ struct target *target = bank->target; - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -729,23 +645,19 @@ COMMAND_HANDLER(lpc2900_handle_write_custom_command) const char *type = (CMD_ARGC >= 3) ? CMD_ARGV[2] : NULL; retval = image_open(&image, filename, type); if (retval != ERROR_OK) - { return retval; - } /* Do a sanity check: The image must be exactly the size of the customer programmable area. Any other size is rejected. */ - if( image.num_sections != 1 ) - { + if (image.num_sections != 1) { LOG_ERROR("Only one section allowed in image file."); return ERROR_COMMAND_SYNTAX_ERROR; } - if( (image.sections[0].base_address != 0) || - (image.sections[0].size != ISS_CUSTOMER_SIZE) ) - { + if ((image.sections[0].base_address != 0) || + (image.sections[0].size != ISS_CUSTOMER_SIZE)) { LOG_ERROR("Incorrect image file size. Expected %d, " "got %" PRIu32, - ISS_CUSTOMER_SIZE, image.sections[0].size); + ISS_CUSTOMER_SIZE, image.sections[0].size); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -756,35 +668,33 @@ COMMAND_HANDLER(lpc2900_handle_write_custom_command) /* Page 4 */ uint32_t offset = ISS_CUSTOMER_START1 % FLASH_PAGE_SIZE; - memset( page, 0xff, FLASH_PAGE_SIZE ); + memset(page, 0xff, FLASH_PAGE_SIZE); size_t size_read; - retval = image_read_section( &image, 0, 0, - ISS_CUSTOMER_SIZE1, &page[offset], &size_read); - if( retval != ERROR_OK ) - { + retval = image_read_section(&image, 0, 0, + ISS_CUSTOMER_SIZE1, &page[offset], &size_read); + if (retval != ERROR_OK) { LOG_ERROR("couldn't read from file '%s'", filename); image_close(&image); return retval; } - if( (retval = lpc2900_write_index_page( bank, 4, &page )) != ERROR_OK ) - { + retval = lpc2900_write_index_page(bank, 4, &page); + if (retval != ERROR_OK) { image_close(&image); return retval; } /* Page 5 */ offset = ISS_CUSTOMER_START2 % FLASH_PAGE_SIZE; - memset( page, 0xff, FLASH_PAGE_SIZE ); - retval = image_read_section( &image, 0, ISS_CUSTOMER_SIZE1, - ISS_CUSTOMER_SIZE2, &page[offset], &size_read); - if( retval != ERROR_OK ) - { + memset(page, 0xff, FLASH_PAGE_SIZE); + retval = image_read_section(&image, 0, ISS_CUSTOMER_SIZE1, + ISS_CUSTOMER_SIZE2, &page[offset], &size_read); + if (retval != ERROR_OK) { LOG_ERROR("couldn't read from file '%s'", filename); image_close(&image); return retval; } - if( (retval = lpc2900_write_index_page( bank, 5, &page )) != ERROR_OK ) - { + retval = lpc2900_write_index_page(bank, 5, &page); + if (retval != ERROR_OK) { image_close(&image); return retval; } @@ -794,17 +704,13 @@ COMMAND_HANDLER(lpc2900_handle_write_custom_command) return ERROR_OK; } - - /** * Activate 'sector security' for a range of sectors. */ COMMAND_HANDLER(lpc2900_handle_secure_sector_command) { if (CMD_ARGC < 3) - { return ERROR_COMMAND_SYNTAX_ERROR; - } /* Get the bank descriptor */ struct flash_bank *bank; @@ -815,10 +721,9 @@ COMMAND_HANDLER(lpc2900_handle_secure_sector_command) struct lpc2900_flash_bank *lpc2900_info = bank->driver_priv; /* Check if command execution is allowed. */ - if( !lpc2900_info->risky ) - { - command_print( CMD_CTX, "Command execution not allowed! " - "(use 'password' command first)"); + if (!lpc2900_info->risky) { + command_print(CMD_CTX, "Command execution not allowed! " + "(use 'password' command first)"); return ERROR_COMMAND_ARGUMENT_INVALID; } lpc2900_info->risky = 0; @@ -827,11 +732,10 @@ COMMAND_HANDLER(lpc2900_handle_secure_sector_command) int first, last; COMMAND_PARSE_NUMBER(int, CMD_ARGV[1], first); COMMAND_PARSE_NUMBER(int, CMD_ARGV[2], last); - if( (first >= bank->num_sectors) || - (last >= bank->num_sectors) || - (first > last) ) - { - command_print( CMD_CTX, "Illegal sector range" ); + if ((first >= bank->num_sectors) || + (last >= bank->num_sectors) || + (first > last)) { + command_print(CMD_CTX, "Illegal sector range"); return ERROR_COMMAND_ARGUMENT_INVALID; } @@ -839,71 +743,56 @@ COMMAND_HANDLER(lpc2900_handle_secure_sector_command) int sector; /* Sectors in page 6 */ - if( (first <= 4) || (last >= 8) ) - { - memset( &page, 0xff, FLASH_PAGE_SIZE ); - for( sector = first; sector <= last; sector++ ) - { - if( sector <= 4 ) - { - memset( &page[0xB0 + 16*sector], 0, 16 ); - } - else if( sector >= 8 ) - { - memset( &page[0x00 + 16*(sector - 8)], 0, 16 ); - } + if ((first <= 4) || (last >= 8)) { + memset(&page, 0xff, FLASH_PAGE_SIZE); + for (sector = first; sector <= last; sector++) { + if (sector <= 4) + memset(&page[0xB0 + 16*sector], 0, 16); + else if (sector >= 8) + memset(&page[0x00 + 16*(sector - 8)], 0, 16); } - if( (retval = lpc2900_write_index_page( bank, 6, &page )) != ERROR_OK ) - { + retval = lpc2900_write_index_page(bank, 6, &page); + if (retval != ERROR_OK) { LOG_ERROR("failed to update index sector page 6"); return retval; } } /* Sectors in page 7 */ - if( (first <= 7) && (last >= 5) ) - { - memset( &page, 0xff, FLASH_PAGE_SIZE ); - for( sector = first; sector <= last; sector++ ) - { - if( (sector >= 5) && (sector <= 7) ) - { - memset( &page[0x00 + 16*(sector - 5)], 0, 16 ); - } + if ((first <= 7) && (last >= 5)) { + memset(&page, 0xff, FLASH_PAGE_SIZE); + for (sector = first; sector <= last; sector++) { + if ((sector >= 5) && (sector <= 7)) + memset(&page[0x00 + 16*(sector - 5)], 0, 16); } - if( (retval = lpc2900_write_index_page( bank, 7, &page )) != ERROR_OK ) - { + retval = lpc2900_write_index_page(bank, 7, &page); + if (retval != ERROR_OK) { LOG_ERROR("failed to update index sector page 7"); return retval; } } - command_print( CMD_CTX, - "Sectors security will become effective after next power cycle"); + command_print(CMD_CTX, + "Sectors security will become effective after next power cycle"); /* Update the sector security status */ - if ( lpc2900_read_security_status(bank) != ERROR_OK ) - { - LOG_ERROR( "Cannot determine sector security status" ); + if (lpc2900_read_security_status(bank) != ERROR_OK) { + LOG_ERROR("Cannot determine sector security status"); return ERROR_FLASH_OPERATION_FAILED; } return ERROR_OK; } - - /** * Activate JTAG protection. */ COMMAND_HANDLER(lpc2900_handle_secure_jtag_command) { if (CMD_ARGC < 1) - { return ERROR_COMMAND_SYNTAX_ERROR; - } /* Get the bank descriptor */ struct flash_bank *bank; @@ -914,17 +803,16 @@ COMMAND_HANDLER(lpc2900_handle_secure_jtag_command) struct lpc2900_flash_bank *lpc2900_info = bank->driver_priv; /* Check if command execution is allowed. */ - if( !lpc2900_info->risky ) - { - command_print( CMD_CTX, "Command execution not allowed! " - "(use 'password' command first)"); + if (!lpc2900_info->risky) { + command_print(CMD_CTX, "Command execution not allowed! " + "(use 'password' command first)"); return ERROR_COMMAND_ARGUMENT_INVALID; } lpc2900_info->risky = 0; /* Prepare page */ uint8_t page[FLASH_PAGE_SIZE]; - memset( &page, 0xff, FLASH_PAGE_SIZE ); + memset(&page, 0xff, FLASH_PAGE_SIZE); /* Insert "soft" protection word */ @@ -934,9 +822,8 @@ COMMAND_HANDLER(lpc2900_handle_secure_jtag_command) page[0x30 + 3] = 0x7F; /* Write to page 5 */ - if( (retval = lpc2900_write_index_page( bank, 5, &page )) - != ERROR_OK ) - { + retval = lpc2900_write_index_page(bank, 5, &page); + if (retval != ERROR_OK) { LOG_ERROR("failed to update index sector page 5"); return retval; } @@ -946,8 +833,6 @@ COMMAND_HANDLER(lpc2900_handle_secure_jtag_command) return ERROR_OK; } - - /*********************** Flash interface functions **************************/ static const struct command_registration lpc2900_exec_command_handlers[] = { @@ -999,6 +884,7 @@ static const struct command_registration lpc2900_exec_command_handlers[] = { }, COMMAND_REGISTRATION_DONE }; + static const struct command_registration lpc2900_command_handlers[] = { { .name = "lpc2900", @@ -1010,15 +896,13 @@ static const struct command_registration lpc2900_command_handlers[] = { COMMAND_REGISTRATION_DONE }; -/// Evaluate flash bank command. +/* / Evaluate flash bank command. */ FLASH_BANK_COMMAND_HANDLER(lpc2900_flash_bank_command) { struct lpc2900_flash_bank *lpc2900_info; if (CMD_ARGC < 6) - { return ERROR_COMMAND_SYNTAX_ERROR; - } lpc2900_info = malloc(sizeof(struct lpc2900_flash_bank)); bank->driver_priv = lpc2900_info; @@ -1034,19 +918,17 @@ FLASH_BANK_COMMAND_HANDLER(lpc2900_flash_bank_command) uint32_t clock_limit; /* Check program time limit */ clock_limit = 512000000l / FLASH_PROGRAM_TIME; - if (lpc2900_info->clk_sys_fmc < clock_limit) - { + if (lpc2900_info->clk_sys_fmc < clock_limit) { LOG_WARNING("flash clock must be at least %" PRIu32 " kHz", - (clock_limit / 1000)); + (clock_limit / 1000)); return ERROR_FLASH_BANK_INVALID; } /* Check erase time limit */ clock_limit = (uint32_t)((32767.0 * 512.0 * 1e6) / FLASH_ERASE_TIME); - if (lpc2900_info->clk_sys_fmc > clock_limit) - { - LOG_WARNING("flash clock must be a maximum of %" PRIu32" kHz", - (clock_limit / 1000)); + if (lpc2900_info->clk_sys_fmc > clock_limit) { + LOG_WARNING("flash clock must be a maximum of %" PRIu32 " kHz", + (clock_limit / 1000)); return ERROR_FLASH_BANK_INVALID; } @@ -1057,7 +939,6 @@ FLASH_BANK_COMMAND_HANDLER(lpc2900_flash_bank_command) return ERROR_OK; } - /** * Erase sector(s). * @@ -1076,19 +957,16 @@ static int lpc2900_erase(struct flash_bank *bank, int first, int last) status = lpc2900_is_ready(bank); if (status != ERROR_OK) - { return status; - } /* Sanity check on sector range */ - if ((first < 0) || (last < first) || (last >= bank->num_sectors)) - { + if ((first < 0) || (last < first) || (last >= bank->num_sectors)) { LOG_INFO("Bad sector range"); return ERROR_FLASH_SECTOR_INVALID; } /* Update the info about secured sectors */ - lpc2900_read_security_status( bank ); + lpc2900_read_security_status(bank); /* The selected sector range might include secured sectors. An attempt * to erase such a sector will cause the erase to fail also for unsecured @@ -1097,22 +975,17 @@ static int lpc2900_erase(struct flash_bank *bank, int first, int last) * a special way. */ last_unsecured_sector = -1; - for (sector = first; sector <= last; sector++) - { - if ( !bank->sectors[sector].is_protected ) - { + for (sector = first; sector <= last; sector++) { + if (!bank->sectors[sector].is_protected) last_unsecured_sector = sector; - } } /* Exit now, in case of the rare constellation where all sectors in range * are secured. This is regarded a success, since erasing/programming of * secured sectors shall be handled transparently. */ - if ( last_unsecured_sector == -1 ) - { + if (last_unsecured_sector == -1) return ERROR_OK; - } /* Enable flash block and set the correct CRA clock of 66 kHz */ lpc2900_setup(bank); @@ -1122,36 +995,31 @@ static int lpc2900_erase(struct flash_bank *bank, int first, int last) /* Set the program/erase timer to FLASH_ERASE_TIME */ target_write_u32(target, FPTR, - FPTR_EN_T | lpc2900_calc_tr( lpc2900_info->clk_sys_fmc, - FLASH_ERASE_TIME )); + FPTR_EN_T | lpc2900_calc_tr(lpc2900_info->clk_sys_fmc, + FLASH_ERASE_TIME)); /* Sectors are marked for erasure, then erased all together */ - for (sector = first; sector <= last_unsecured_sector; sector++) - { + for (sector = first; sector <= last_unsecured_sector; sector++) { /* Only mark sectors that aren't secured. Any attempt to erase a group * of sectors will fail if any single one of them is secured! */ - if ( !bank->sectors[sector].is_protected ) - { + if (!bank->sectors[sector].is_protected) { /* Unprotect the sector */ target_write_u32(target, bank->sectors[sector].offset, 0); target_write_u32(target, FCTR, - FCTR_FS_LOADREQ | FCTR_FS_WPB | - FCTR_FS_WEB | FCTR_FS_WRE | FCTR_FS_CS); + FCTR_FS_LOADREQ | FCTR_FS_WPB | + FCTR_FS_WEB | FCTR_FS_WRE | FCTR_FS_CS); /* Mark the sector for erasure. The last sector in the list triggers the erasure. */ target_write_u32(target, bank->sectors[sector].offset, 0); - if ( sector == last_unsecured_sector ) - { + if (sector == last_unsecured_sector) { target_write_u32(target, FCTR, - FCTR_FS_PROGREQ | FCTR_FS_WPB | FCTR_FS_CS); - } - else - { + FCTR_FS_PROGREQ | FCTR_FS_WPB | FCTR_FS_CS); + } else { target_write_u32(target, FCTR, - FCTR_FS_LOADREQ | FCTR_FS_WPB | - FCTR_FS_WEB | FCTR_FS_CS); + FCTR_FS_LOADREQ | FCTR_FS_WPB | + FCTR_FS_WEB | FCTR_FS_CS); } } } @@ -1159,10 +1027,8 @@ static int lpc2900_erase(struct flash_bank *bank, int first, int last) /* Wait for the end of the erase operation. If it's not over after two seconds, * something went dreadfully wrong... :-( */ - if( lpc2900_wait_status(bank, INTSRC_END_OF_ERASE, 2000) != ERROR_OK ) - { + if (lpc2900_wait_status(bank, INTSRC_END_OF_ERASE, 2000) != ERROR_OK) return ERROR_FLASH_OPERATION_FAILED; - } /* Normal flash operating mode */ target_write_u32(target, FCTR, FCTR_FS_CS | FCTR_FS_WEB); @@ -1170,22 +1036,19 @@ static int lpc2900_erase(struct flash_bank *bank, int first, int last) return ERROR_OK; } - - static int lpc2900_protect(struct flash_bank *bank, int set, int first, int last) { /* This command is not supported. - * "Protection" in LPC2900 terms is handled transparently. Sectors will - * automatically be unprotected as needed. - * Instead we use the concept of sector security. A secured sector is shown - * as "protected" in OpenOCD. Sector security is a permanent feature, and - * cannot be disabled once activated. - */ + * "Protection" in LPC2900 terms is handled transparently. Sectors will + * automatically be unprotected as needed. + * Instead we use the concept of sector security. A secured sector is shown + * as "protected" in OpenOCD. Sector security is a permanent feature, and + * cannot be disabled once activated. + */ return ERROR_OK; } - /** * Write data to flash. * @@ -1195,7 +1058,7 @@ static int lpc2900_protect(struct flash_bank *bank, int set, int first, int last * @param count Number of bytes to be programmed */ static int lpc2900_write(struct flash_bank *bank, uint8_t *buffer, - uint32_t offset, uint32_t count) + uint32_t offset, uint32_t count) { uint8_t page[FLASH_PAGE_SIZE]; uint32_t status; @@ -1207,117 +1070,107 @@ static int lpc2900_write(struct flash_bank *bank, uint8_t *buffer, static const uint32_t write_target_code[] = { /* Set auto latch mode: FCTR=CS|WRE|WEB */ - 0xe3a0a007, /* loop mov r10, #0x007 */ - 0xe583a000, /* str r10,[r3,#0] */ + 0xe3a0a007, /* loop mov r10, #0x007 */ + 0xe583a000, /* str r10,[r3,#0] */ /* Load complete page into latches */ - 0xe3a06020, /* mov r6,#(512/16) */ - 0xe8b00f00, /* next ldmia r0!,{r8-r11} */ - 0xe8a10f00, /* stmia r1!,{r8-r11} */ - 0xe2566001, /* subs r6,#1 */ - 0x1afffffb, /* bne next */ + 0xe3a06020, /* mov r6,#(512/16) */ + 0xe8b00f00, /* next ldmia r0!,{r8-r11} */ + 0xe8a10f00, /* stmia r1!,{r8-r11} */ + 0xe2566001, /* subs r6,#1 */ + 0x1afffffb, /* bne next */ /* Clear END_OF_BURN interrupt status */ - 0xe3a0a002, /* mov r10,#(1 << 1) */ - 0xe583afe8, /* str r10,[r3,#0xfe8] */ + 0xe3a0a002, /* mov r10,#(1 << 1) */ + 0xe583afe8, /* str r10,[r3,#0xfe8] */ /* Set the erase time to FLASH_PROGRAM_TIME */ - 0xe5834008, /* str r4,[r3,#8] */ + 0xe5834008, /* str r4,[r3,#8] */ /* Trigger flash write - FCTR = CS | WRE | WPB | PROGREQ */ - 0xe3a0a083, /* mov r10,#0x83 */ - 0xe38aaa01, /* orr r10,#0x1000 */ - 0xe583a000, /* str r10,[r3,#0] */ + * FCTR = CS | WRE | WPB | PROGREQ */ + 0xe3a0a083, /* mov r10,#0x83 */ + 0xe38aaa01, /* orr r10,#0x1000 */ + 0xe583a000, /* str r10,[r3,#0] */ /* Wait for end of burn */ - 0xe593afe0, /* wait ldr r10,[r3,#0xfe0] */ - 0xe21aa002, /* ands r10,#(1 << 1) */ - 0x0afffffc, /* beq wait */ + 0xe593afe0, /* wait ldr r10,[r3,#0xfe0] */ + 0xe21aa002, /* ands r10,#(1 << 1) */ + 0x0afffffc, /* beq wait */ /* End? */ - 0xe2522001, /* subs r2,#1 */ - 0x1affffed, /* bne loop */ + 0xe2522001, /* subs r2,#1 */ + 0x1affffed, /* bne loop */ - 0xeafffffe /* done b done */ + 0xeafffffe /* done b done */ }; status = lpc2900_is_ready(bank); if (status != ERROR_OK) - { return status; - } /* Enable flash block and set the correct CRA clock of 66 kHz */ lpc2900_setup(bank); /* Update the info about secured sectors */ - lpc2900_read_security_status( bank ); + lpc2900_read_security_status(bank); /* Unprotect all involved sectors */ - for (sector = 0; sector < bank->num_sectors; sector++) - { - /* Start address in or before this sector? */ - /* End address in or behind this sector? */ - if ( ((bank->base + offset) < - (bank->sectors[sector].offset + bank->sectors[sector].size)) && - ((bank->base + (offset + count - 1)) >= bank->sectors[sector].offset) ) - { + for (sector = 0; sector < bank->num_sectors; sector++) { + /* Start address in or before this sector? + * End address in or behind this sector? */ + if (((bank->base + offset) < + (bank->sectors[sector].offset + bank->sectors[sector].size)) && + ((bank->base + (offset + count - 1)) >= bank->sectors[sector].offset)) { /* This sector is involved and needs to be unprotected. - * Don't do it for secured sectors. - */ - if ( !bank->sectors[sector].is_protected ) - { + * Don't do it for secured sectors. + */ + if (!bank->sectors[sector].is_protected) { target_write_u32(target, bank->sectors[sector].offset, 0); target_write_u32(target, FCTR, - FCTR_FS_LOADREQ | FCTR_FS_WPB | - FCTR_FS_WEB | FCTR_FS_WRE | FCTR_FS_CS); + FCTR_FS_LOADREQ | FCTR_FS_WPB | + FCTR_FS_WEB | FCTR_FS_WRE | FCTR_FS_CS); } } } /* Set the program/erase time to FLASH_PROGRAM_TIME */ - uint32_t prog_time = FPTR_EN_T | lpc2900_calc_tr( lpc2900_info->clk_sys_fmc, - FLASH_PROGRAM_TIME ); + uint32_t prog_time = FPTR_EN_T | lpc2900_calc_tr(lpc2900_info->clk_sys_fmc, FLASH_PROGRAM_TIME); /* If there is a working area of reasonable size, use it to program via - a target algorithm. If not, fall back to host programming. */ + * a target algorithm. If not, fall back to host programming. */ /* We need some room for target code. */ uint32_t target_code_size = sizeof(write_target_code); /* Try working area allocation. Start with a large buffer, and try with - reduced size if that fails. */ + * reduced size if that fails. */ struct working_area *warea; uint32_t buffer_size = lpc2900_info->max_ram_block - 1 * KiB; - while( (retval = target_alloc_working_area_try(target, - buffer_size + target_code_size, - &warea)) != ERROR_OK ) - { + while ((retval = target_alloc_working_area_try(target, + buffer_size + target_code_size, + &warea)) != ERROR_OK) { /* Try a smaller buffer now, and stop if it's too small. */ buffer_size -= 1 * KiB; - if (buffer_size < 2 * KiB) - { - LOG_INFO( "no (large enough) working area" - ", falling back to host mode" ); + if (buffer_size < 2 * KiB) { + LOG_INFO("no (large enough) working area, falling back to host mode"); warea = NULL; break; } - }; + } + ; - if( warea ) - { + if (warea) { struct reg_param reg_params[5]; struct arm_algorithm armv4_5_info; /* We can use target mode. Download the algorithm. */ - retval = target_write_buffer( target, - (warea->address)+buffer_size, - target_code_size, - (uint8_t *)write_target_code); - if (retval != ERROR_OK) - { + retval = target_write_buffer(target, + (warea->address)+buffer_size, + target_code_size, + (uint8_t *)write_target_code); + if (retval != ERROR_OK) { LOG_ERROR("Unable to write block write code to target"); target_free_all_working_areas(target); return ERROR_FLASH_OPERATION_FAILED; @@ -1330,58 +1183,50 @@ static int lpc2900_write(struct flash_bank *bank, uint8_t *buffer, init_reg_param(®_params[4], "r4", 32, PARAM_OUT); /* Write to flash in large blocks */ - while ( count != 0 ) - { + while (count != 0) { uint32_t this_npages; uint8_t *this_buffer; - int start_sector = lpc2900_address2sector( bank, offset ); + int start_sector = lpc2900_address2sector(bank, offset); /* First page / last page / rest */ - if( offset % FLASH_PAGE_SIZE ) - { + if (offset % FLASH_PAGE_SIZE) { /* Block doesn't start on page boundary. - Burn first partial page separately. */ - memset( &page, 0xff, sizeof(page) ); - memcpy( &page[offset % FLASH_PAGE_SIZE], - buffer, - FLASH_PAGE_SIZE - (offset % FLASH_PAGE_SIZE) ); + * Burn first partial page separately. */ + memset(&page, 0xff, sizeof(page)); + memcpy(&page[offset % FLASH_PAGE_SIZE], + buffer, + FLASH_PAGE_SIZE - (offset % FLASH_PAGE_SIZE)); this_npages = 1; this_buffer = &page[0]; count = count + (offset % FLASH_PAGE_SIZE); offset = offset - (offset % FLASH_PAGE_SIZE); - } - else if( count < FLASH_PAGE_SIZE ) - { + } else if (count < FLASH_PAGE_SIZE) { /* Download last incomplete page separately. */ - memset( &page, 0xff, sizeof(page) ); - memcpy( &page, buffer, count ); + memset(&page, 0xff, sizeof(page)); + memcpy(&page, buffer, count); this_npages = 1; this_buffer = &page[0]; count = FLASH_PAGE_SIZE; - } - else - { + } else { /* Download as many full pages as possible */ this_npages = (count < buffer_size) ? - count / FLASH_PAGE_SIZE : - buffer_size / FLASH_PAGE_SIZE; + count / FLASH_PAGE_SIZE : + buffer_size / FLASH_PAGE_SIZE; this_buffer = buffer; /* Make sure we stop at the next secured sector */ sector = start_sector + 1; - while( sector < bank->num_sectors ) - { + while (sector < bank->num_sectors) { /* Secured? */ - if( bank->sectors[sector].is_protected ) - { + if (bank->sectors[sector].is_protected) { /* Is that next sector within the current block? */ - if( (bank->sectors[sector].offset - bank->base) < - (offset + (this_npages * FLASH_PAGE_SIZE)) ) - { + if ((bank->sectors[sector].offset - bank->base) < + (offset + (this_npages * FLASH_PAGE_SIZE))) { /* Yes! Split the block */ this_npages = - (bank->sectors[sector].offset - bank->base - offset) - / FLASH_PAGE_SIZE; + (bank->sectors[sector].offset - + bank->base - offset) + / FLASH_PAGE_SIZE; break; } } @@ -1391,20 +1236,17 @@ static int lpc2900_write(struct flash_bank *bank, uint8_t *buffer, } /* Skip the current sector if it is secured */ - if (bank->sectors[start_sector].is_protected) - { + if (bank->sectors[start_sector].is_protected) { LOG_DEBUG("Skip secured sector %d", - start_sector); + start_sector); /* Stop if this is the last sector */ if (start_sector == bank->num_sectors - 1) - { break; - } /* Skip */ uint32_t nskip = bank->sectors[start_sector].size - - (offset % bank->sectors[start_sector].size); + (offset % bank->sectors[start_sector].size); offset += nskip; buffer += nskip; count = (count >= nskip) ? (count - nskip) : 0; @@ -1412,11 +1254,9 @@ static int lpc2900_write(struct flash_bank *bank, uint8_t *buffer, } /* Execute buffer download */ - if ((retval = target_write_buffer(target, - warea->address, - this_npages * FLASH_PAGE_SIZE, - this_buffer)) != ERROR_OK) - { + retval = target_write_buffer(target, warea->address, + this_npages * FLASH_PAGE_SIZE, this_buffer); + if (retval != ERROR_OK) { LOG_ERROR("Unable to write data to target"); target_free_all_working_areas(target); return ERROR_FLASH_OPERATION_FAILED; @@ -1435,13 +1275,12 @@ static int lpc2900_write(struct flash_bank *bank, uint8_t *buffer, armv4_5_info.core_state = ARM_STATE_ARM; retval = target_run_algorithm(target, 0, NULL, 5, reg_params, - (warea->address) + buffer_size, - (warea->address) + buffer_size + target_code_size - 4, - 10000, /* 10s should be enough for max. 16 KiB of data */ - &armv4_5_info); + (warea->address) + buffer_size, + (warea->address) + buffer_size + target_code_size - 4, + 10000, /* 10s should be enough for max. 16 KiB of data */ + &armv4_5_info); - if (retval != ERROR_OK) - { + if (retval != ERROR_OK) { LOG_ERROR("Execution of flash algorithm failed."); target_free_all_working_areas(target); retval = ERROR_FLASH_OPERATION_FAILED; @@ -1460,38 +1299,32 @@ static int lpc2900_write(struct flash_bank *bank, uint8_t *buffer, destroy_reg_param(®_params[3]); destroy_reg_param(®_params[4]); target_free_all_working_areas(target); - } - else - { + } else { /* Write to flash memory page-wise */ - while ( count != 0 ) - { + while (count != 0) { /* How many bytes do we copy this time? */ num_bytes = (count >= FLASH_PAGE_SIZE) ? - FLASH_PAGE_SIZE - (offset % FLASH_PAGE_SIZE) : - count; + FLASH_PAGE_SIZE - (offset % FLASH_PAGE_SIZE) : + count; /* Don't do anything with it if the page is in a secured sector. */ - if ( !bank->sectors[lpc2900_address2sector(bank, offset)].is_protected ) - { + if (!bank->sectors[lpc2900_address2sector(bank, offset)].is_protected) { /* Set latch load mode */ target_write_u32(target, FCTR, - FCTR_FS_CS | FCTR_FS_WRE | FCTR_FS_WEB); + FCTR_FS_CS | FCTR_FS_WRE | FCTR_FS_WEB); /* Always clear the buffer (a little overhead, but who cares) */ memset(page, 0xFF, FLASH_PAGE_SIZE); /* Copy them to the buffer */ - memcpy( &page[offset % FLASH_PAGE_SIZE], - &buffer[offset % FLASH_PAGE_SIZE], - num_bytes ); + memcpy(&page[offset % FLASH_PAGE_SIZE], + &buffer[offset % FLASH_PAGE_SIZE], + num_bytes); /* Write whole page to flash data latches */ - if (target_write_memory( - target, - bank->base + (offset - (offset % FLASH_PAGE_SIZE)), - 4, FLASH_PAGE_SIZE / 4, page) != ERROR_OK) - { + if (target_write_memory(target, + bank->base + (offset - (offset % FLASH_PAGE_SIZE)), + 4, FLASH_PAGE_SIZE / 4, page) != ERROR_OK) { LOG_ERROR("Write failed @ 0x%8.8" PRIx32, offset); target_write_u32(target, FCTR, FCTR_FS_CS | FCTR_FS_WEB); @@ -1506,13 +1339,12 @@ static int lpc2900_write(struct flash_bank *bank, uint8_t *buffer, /* Trigger flash write */ target_write_u32(target, FCTR, - FCTR_FS_CS | FCTR_FS_WRE | FCTR_FS_WPB | FCTR_FS_PROGREQ); + FCTR_FS_CS | FCTR_FS_WRE | FCTR_FS_WPB | FCTR_FS_PROGREQ); /* Wait for the end of the write operation. If it's not over * after one second, something went dreadfully wrong... :-( */ - if (lpc2900_wait_status(bank, INTSRC_END_OF_BURN, 1000) != ERROR_OK) - { + if (lpc2900_wait_status(bank, INTSRC_END_OF_BURN, 1000) != ERROR_OK) { LOG_ERROR("Write failed @ 0x%8.8" PRIx32, offset); target_write_u32(target, FCTR, FCTR_FS_CS | FCTR_FS_WEB); @@ -1535,7 +1367,6 @@ static int lpc2900_write(struct flash_bank *bank, uint8_t *buffer, return retval; } - /** * Try and identify the device. * @@ -1551,25 +1382,21 @@ static int lpc2900_probe(struct flash_bank *bank) uint32_t offset; - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } /* We want to do this only once. */ if (lpc2900_info->is_probed) - { return ERROR_OK; - } /* Probing starts with reading the CHIPID register. We will continue only * if this identifies as an LPC2900 device. */ target_read_u32(target, CHIPID, &lpc2900_info->chipid); - if (lpc2900_info->chipid != EXPECTED_CHIPID) - { + if (lpc2900_info->chipid != EXPECTED_CHIPID) { LOG_WARNING("Device is not an LPC29xx"); return ERROR_FLASH_OPERATION_FAILED; } @@ -1592,13 +1419,10 @@ static int lpc2900_probe(struct flash_bank *bank) /* Determine maximum contiguous RAM block */ lpc2900_info->max_ram_block = 16 * KiB; - if( (feat1 & 0x30) == 0x30 ) - { + if ((feat1 & 0x30) == 0x30) { lpc2900_info->max_ram_block = 32 * KiB; - if( (feat1 & 0x0C) == 0x0C ) - { + if ((feat1 & 0x0C) == 0x0C) lpc2900_info->max_ram_block = 48 * KiB; - } } /* Determine package code and ITCM size */ @@ -1607,93 +1431,57 @@ static int lpc2900_probe(struct flash_bank *bank) /* Determine the exact type number. */ uint32_t found = 1; - if ( (package_code == 4) && (itcm_code == 5) ) - { + if ((package_code == 4) && (itcm_code == 5)) { /* Old LPC2917 or LPC2919 (non-/01 devices) */ lpc2900_info->target_name = (bank->size == 768*KiB) ? "LPC2919" : "LPC2917"; - } - else - { - if ( package_code == 2 ) - { + } else { + if (package_code == 2) { /* 100-pin package */ - if ( bank->size == 128*KiB ) - { + if (bank->size == 128*KiB) lpc2900_info->target_name = "LPC2921"; - } - else if ( bank->size == 256*KiB ) - { + else if (bank->size == 256*KiB) lpc2900_info->target_name = "LPC2923"; - } - else if ( bank->size == 512*KiB ) - { + else if (bank->size == 512*KiB) lpc2900_info->target_name = "LPC2925"; - } else - { found = 0; - } - } - else if ( package_code == 4 ) - { + } else if (package_code == 4) { /* 144-pin package */ - if ( (bank->size == 256*KiB) && (feat3 == 0xFFFFFFE9) ) - { + if ((bank->size == 256*KiB) && (feat3 == 0xFFFFFFE9)) lpc2900_info->target_name = "LPC2926"; - } - else if ( (bank->size == 512*KiB) && (feat3 == 0xFFFFFCF0) ) - { + else if ((bank->size == 512*KiB) && (feat3 == 0xFFFFFCF0)) lpc2900_info->target_name = "LPC2917/01"; - } - else if ( (bank->size == 512*KiB) && (feat3 == 0xFFFFFFF1) ) - { + else if ((bank->size == 512*KiB) && (feat3 == 0xFFFFFFF1)) lpc2900_info->target_name = "LPC2927"; - } - else if ( (bank->size == 768*KiB) && (feat3 == 0xFFFFFCF8) ) - { + else if ((bank->size == 768*KiB) && (feat3 == 0xFFFFFCF8)) lpc2900_info->target_name = "LPC2919/01"; - } - else if ( (bank->size == 768*KiB) && (feat3 == 0xFFFFFFF9) ) - { + else if ((bank->size == 768*KiB) && (feat3 == 0xFFFFFFF9)) lpc2900_info->target_name = "LPC2929"; - } else - { found = 0; - } - } - else if ( package_code == 5 ) - { + } else if (package_code == 5) { /* 208-pin package */ lpc2900_info->target_name = (bank->size == 0) ? "LPC2930" : "LPC2939"; - } - else - { + } else found = 0; - } } - if ( !found ) - { - LOG_WARNING("Unknown LPC29xx derivative" - " (FEATx=" - "%08" PRIx32 ":%08" PRIx32 ":%08" PRIx32 ":%08" PRIx32 ")", - feat0, feat1, feat2, feat3 - ); + if (!found) { + LOG_WARNING("Unknown LPC29xx derivative (FEATx=" + "%08" PRIx32 ":%08" PRIx32 ":%08" PRIx32 ":%08" PRIx32 ")", + feat0, feat1, feat2, feat3); return ERROR_FLASH_OPERATION_FAILED; } /* Show detected device */ - LOG_INFO("Flash bank %d" - ": Device %s, %" PRIu32 - " KiB in %d sectors", - bank->bank_number, - lpc2900_info->target_name, bank->size / KiB, - bank->num_sectors); + LOG_INFO("Flash bank %d: Device %s, %" PRIu32 + " KiB in %d sectors", + bank->bank_number, + lpc2900_info->target_name, bank->size / KiB, + bank->num_sectors); /* Flashless devices cannot be handled */ - if ( bank->num_sectors == 0 ) - { + if (bank->num_sectors == 0) { LOG_WARNING("Flashless device cannot be handled"); return ERROR_FLASH_OPERATION_FAILED; } @@ -1706,22 +1494,16 @@ static int lpc2900_probe(struct flash_bank *bank) bank->sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors); offset = 0; - for (i = 0; i < bank->num_sectors; i++) - { + for (i = 0; i < bank->num_sectors; i++) { bank->sectors[i].offset = offset; bank->sectors[i].is_erased = -1; bank->sectors[i].is_protected = -1; - if ( i <= 7 ) - { + if (i <= 7) bank->sectors[i].size = 8 * KiB; - } - else if ( i <= 18 ) - { + else if (i <= 18) bank->sectors[i].size = 64 * KiB; - } - else - { + else { /* We shouldn't come here. But there might be a new part out there * that has more than 19 sectors. Politely ask for a fix then. */ @@ -1735,8 +1517,7 @@ static int lpc2900_probe(struct flash_bank *bank) lpc2900_info->is_probed = true; /* Read sector security status */ - if ( lpc2900_read_security_status(bank) != ERROR_OK ) - { + if (lpc2900_read_security_status(bank) != ERROR_OK) { LOG_ERROR("Cannot determine sector security status"); return ERROR_FLASH_OPERATION_FAILED; } @@ -1744,7 +1525,6 @@ static int lpc2900_probe(struct flash_bank *bank) return ERROR_OK; } - /** * Run a blank check for each sector. * @@ -1757,8 +1537,7 @@ static int lpc2900_probe(struct flash_bank *bank) static int lpc2900_erase_check(struct flash_bank *bank) { uint32_t status = lpc2900_is_ready(bank); - if (status != ERROR_OK) - { + if (status != ERROR_OK) { LOG_INFO("Processor not halted/not probed"); return status; } @@ -1767,43 +1546,35 @@ static int lpc2900_erase_check(struct flash_bank *bank) * sector. Compare against the expected signature of an empty sector. */ int sector; - for ( sector = 0; sector < bank->num_sectors; sector++ ) - { + for (sector = 0; sector < bank->num_sectors; sector++) { uint32_t signature[4]; - if ( (status = lpc2900_run_bist128( bank, - bank->sectors[sector].offset, - bank->sectors[sector].offset + - (bank->sectors[sector].size - 1), - &signature)) != ERROR_OK ) - { + status = lpc2900_run_bist128(bank, bank->sectors[sector].offset, + bank->sectors[sector].offset + (bank->sectors[sector].size - 1), &signature); + if (status != ERROR_OK) return status; - } /* The expected signatures for an empty sector are different * for 8 KiB and 64 KiB sectors. */ - if ( bank->sectors[sector].size == 8*KiB ) - { + if (bank->sectors[sector].size == 8*KiB) { bank->sectors[sector].is_erased = - (signature[3] == 0x01ABAAAA) && - (signature[2] == 0xAAAAAAAA) && - (signature[1] == 0xAAAAAAAA) && - (signature[0] == 0xAAA00AAA); + (signature[3] == 0x01ABAAAA) && + (signature[2] == 0xAAAAAAAA) && + (signature[1] == 0xAAAAAAAA) && + (signature[0] == 0xAAA00AAA); } - if ( bank->sectors[sector].size == 64*KiB ) - { + if (bank->sectors[sector].size == 64*KiB) { bank->sectors[sector].is_erased = - (signature[3] == 0x11801222) && - (signature[2] == 0xB88844FF) && - (signature[1] == 0x11A22008) && - (signature[0] == 0x2B1BFE44); + (signature[3] == 0x11801222) && + (signature[2] == 0xB88844FF) && + (signature[1] == 0x11A22008) && + (signature[0] == 0x2B1BFE44); } } return ERROR_OK; } - /** * Get protection (sector security) status. * @@ -1817,7 +1588,6 @@ static int lpc2900_protect_check(struct flash_bank *bank) return lpc2900_read_security_status(bank); } - /** * Print info about the driver (not the device). * @@ -1828,23 +1598,20 @@ static int lpc2900_protect_check(struct flash_bank *bank) static int lpc2900_info(struct flash_bank *bank, char *buf, int buf_size) { snprintf(buf, buf_size, "lpc2900 flash driver"); - return ERROR_OK; } - -struct flash_driver lpc2900_flash = -{ - .name = "lpc2900", - .commands = lpc2900_command_handlers, +struct flash_driver lpc2900_flash = { + .name = "lpc2900", + .commands = lpc2900_command_handlers, .flash_bank_command = lpc2900_flash_bank_command, - .erase = lpc2900_erase, - .protect = lpc2900_protect, - .write = lpc2900_write, - .read = default_flash_read, - .probe = lpc2900_probe, - .auto_probe = lpc2900_probe, - .erase_check = lpc2900_erase_check, - .protect_check = lpc2900_protect_check, - .info = lpc2900_info + .erase = lpc2900_erase, + .protect = lpc2900_protect, + .write = lpc2900_write, + .read = default_flash_read, + .probe = lpc2900_probe, + .auto_probe = lpc2900_probe, + .erase_check = lpc2900_erase_check, + .protect_check = lpc2900_protect_check, + .info = lpc2900_info }; diff --git a/src/flash/nor/non_cfi.c b/src/flash/nor/non_cfi.c index 8acc3cc4..bcc920d2 100644 --- a/src/flash/nor/non_cfi.c +++ b/src/flash/nor/non_cfi.c @@ -19,6 +19,7 @@ * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ + #ifdef HAVE_CONFIG_H #include "config.h" #endif @@ -27,7 +28,6 @@ #include "cfi.h" #include "non_cfi.h" - #define KB 1024 #define MB (1024*1024) #define ERASE_REGION(num, size) (((size/256) << 16) | (num-1)) @@ -43,8 +43,7 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x0, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7, .num_erase_regions = 1, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(16, 4*KB) } }, @@ -57,8 +56,7 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x0, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7, .num_erase_regions = 1, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(32, 4*KB) } }, @@ -71,8 +69,7 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x0, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7, .num_erase_regions = 1, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(64, 4*KB) } }, @@ -85,8 +82,7 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x0, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7, .num_erase_regions = 1, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(128, 4*KB) } }, @@ -99,8 +95,7 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x0, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7, .num_erase_regions = 1, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(8, 64*KB) } }, @@ -113,8 +108,7 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x0, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7, .num_erase_regions = 1, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(128, 4*KB) } }, @@ -127,8 +121,7 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x0, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7, .num_erase_regions = 4, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(1, 16*KB), ERASE_REGION(2, 8*KB), ERASE_REGION(1, 32*KB), @@ -144,8 +137,7 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x0, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7, .num_erase_regions = 4, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(7, 64*KB), ERASE_REGION(1, 32*KB), ERASE_REGION(2, 8*KB), @@ -156,9 +148,9 @@ static struct non_cfi non_cfi_flashes[] = { /* SST 39VF* do not support DQ5 status polling - this currently is only supported by the host algorithm, not by the target code using the work area. - Only true for 8-bit and 32-bit wide memories. 16-bit wide memories - without DQ5 status polling are supported by the target code. - */ + Only true for 8-bit and 32-bit wide memories. 16-bit wide memories + without DQ5 status polling are supported by the target code. + */ { .mfr = CFI_MFR_SST, .id = 0x2782, /* SST39xF160 */ @@ -168,8 +160,7 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x0, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ6_DQ7, .num_erase_regions = 1, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(512, 4*KB) } }, @@ -182,8 +173,7 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x0, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ6_DQ7, .num_erase_regions = 1, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(1024, 4*KB) } }, @@ -196,8 +186,7 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x0, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ6_DQ7, .num_erase_regions = 1, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(512, 4*KB) } }, @@ -210,8 +199,7 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x0, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ6_DQ7, .num_erase_regions = 1, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(512, 4*KB) } }, @@ -224,8 +212,7 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x0, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ6_DQ7, .num_erase_regions = 1, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(512, 4*KB) } }, @@ -238,8 +225,7 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x0, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ6_DQ7, .num_erase_regions = 1, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(1024, 4*KB) } }, @@ -252,26 +238,24 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x0, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ6_DQ7, .num_erase_regions = 1, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(1024, 4*KB) } }, { - .mfr = CFI_MFR_SST, - .id = 0x236d, /* SST39VF6401B */ - .pri_id = 0x02, - .dev_size = 8*MB, - .interface_desc = 0x2, /* x8 or x16 device with nBYTE */ - .max_buf_write_size = 0x0, - .status_poll_mask = CFI_STATUS_POLL_MASK_DQ6_DQ7, - .num_erase_regions = 1, - .erase_region_info = - { - ERASE_REGION(2048, 4*KB) - } - }, - { + .mfr = CFI_MFR_SST, + .id = 0x236d, /* SST39VF6401B */ + .pri_id = 0x02, + .dev_size = 8*MB, + .interface_desc = 0x2, /* x8 or x16 device with nBYTE */ + .max_buf_write_size = 0x0, + .status_poll_mask = CFI_STATUS_POLL_MASK_DQ6_DQ7, + .num_erase_regions = 1, + .erase_region_info = { + ERASE_REGION(2048, 4*KB) + } + }, + { .mfr = CFI_MFR_AMD, .id = 0x22ab, /* AM29F400BB */ .pri_id = 0x02, @@ -280,8 +264,7 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x0, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7, .num_erase_regions = 4, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(1, 16*KB), ERASE_REGION(2, 8*KB), ERASE_REGION(1, 32*KB), @@ -297,8 +280,7 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x0, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7, .num_erase_regions = 4, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(7, 64*KB), ERASE_REGION(1, 32*KB), ERASE_REGION(2, 8*KB), @@ -314,15 +296,14 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x0, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7, .num_erase_regions = 4, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(1, 16*KB), ERASE_REGION(2, 8*KB), ERASE_REGION(1, 32*KB), ERASE_REGION(15, 64*KB) } }, - { + { .mfr = CFI_MFR_FUJITSU, .id = 0x22ea, /* MBM29SL800TE */ .pri_id = 0x02, @@ -331,8 +312,7 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x0, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7, .num_erase_regions = 4, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(15, 64*KB), ERASE_REGION(1, 32*KB), ERASE_REGION(2, 8*KB), @@ -348,8 +328,7 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x00, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7, .num_erase_regions = 4, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(1, 16*KB), ERASE_REGION(2, 8*KB), ERASE_REGION(1, 32*KB), @@ -365,8 +344,7 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x0, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7, .num_erase_regions = 4, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(1, 16*KB), ERASE_REGION(2, 8*KB), ERASE_REGION(1, 32*KB), @@ -382,8 +360,7 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x0, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7, .num_erase_regions = 4, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(1, 16*KB), ERASE_REGION(2, 8*KB), ERASE_REGION(1, 32*KB), @@ -400,8 +377,7 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x0, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7, .num_erase_regions = 4, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(1, 16*KB), ERASE_REGION(2, 8*KB), ERASE_REGION(1, 32*KB), @@ -417,8 +393,7 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x0, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7, .num_erase_regions = 4, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(31, 64*KB), ERASE_REGION(1, 32*KB), ERASE_REGION(2, 8*KB), @@ -434,8 +409,7 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x0, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7, .num_erase_regions = 4, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(1, 16*KB), ERASE_REGION(2, 8*KB), ERASE_REGION(1, 32*KB), @@ -451,8 +425,7 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x0, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7, .num_erase_regions = 3, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(8, 8*KB), ERASE_REGION(2, 32*KB), ERASE_REGION(30, 64*KB) @@ -467,8 +440,7 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x0, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7, .num_erase_regions = 3, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(30, 64*KB), ERASE_REGION(2, 32*KB), ERASE_REGION(8, 8*KB) @@ -483,8 +455,7 @@ static struct non_cfi non_cfi_flashes[] = { .max_buf_write_size = 0x0, .status_poll_mask = CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7, .num_erase_regions = 4, - .erase_region_info = - { + .erase_region_info = { ERASE_REGION(1, 16*KB), ERASE_REGION(2, 8*KB), ERASE_REGION(1, 32*KB), @@ -503,18 +474,15 @@ void cfi_fixup_non_cfi(struct flash_bank *bank) struct cfi_flash_bank *cfi_info = bank->driver_priv; struct non_cfi *non_cfi = non_cfi_flashes; - if(cfi_info->x16_as_x8) + if (cfi_info->x16_as_x8) mask = 0xFF; else mask = 0xFFFF; - for (non_cfi = non_cfi_flashes; non_cfi->mfr; non_cfi++) - { + for (non_cfi = non_cfi_flashes; non_cfi->mfr; non_cfi++) { if ((cfi_info->manufacturer == non_cfi->mfr) - && (cfi_info->device_id == (non_cfi->id & mask))) - { + && (cfi_info->device_id == (non_cfi->id & mask))) break; - } } /* only fixup jedec flashs found in table */ @@ -554,14 +522,13 @@ void cfi_fixup_non_cfi(struct flash_bank *bank) cfi_info->status_poll_mask = non_cfi->status_poll_mask; cfi_info->num_erase_regions = non_cfi->num_erase_regions; size_t erase_region_info_size = sizeof(*cfi_info->erase_region_info) * - cfi_info->num_erase_regions; + cfi_info->num_erase_regions; cfi_info->erase_region_info = malloc(erase_region_info_size); memcpy(cfi_info->erase_region_info, - non_cfi->erase_region_info, erase_region_info_size); + non_cfi->erase_region_info, erase_region_info_size); cfi_info->dev_size = non_cfi->dev_size; - if (cfi_info->pri_id == 0x2) - { + if (cfi_info->pri_id == 0x2) { struct cfi_spansion_pri_ext *pri_ext = malloc(sizeof(struct cfi_spansion_pri_ext)); pri_ext->pri[0] = 'P'; @@ -589,8 +556,7 @@ void cfi_fixup_non_cfi(struct flash_bank *bank) pri_ext->_reversed_geometry = 0; cfi_info->pri_ext = pri_ext; - } else if ((cfi_info->pri_id == 0x1) || (cfi_info->pri_id == 0x3)) - { + } else if ((cfi_info->pri_id == 0x1) || (cfi_info->pri_id == 0x3)) { LOG_ERROR("BUG: non-CFI flashes using the Intel commandset are not yet supported"); exit(-1); } diff --git a/src/flash/nor/non_cfi.h b/src/flash/nor/non_cfi.h index 02193335..178ef010 100644 --- a/src/flash/nor/non_cfi.h +++ b/src/flash/nor/non_cfi.h @@ -17,11 +17,11 @@ * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ + #ifndef NON_CFI_H #define NON_CFI_H -struct non_cfi -{ +struct non_cfi { uint16_t mfr; uint16_t id; uint16_t pri_id; diff --git a/src/flash/nor/ocl.c b/src/flash/nor/ocl.c index 2dd4f521..39e52c72 100644 --- a/src/flash/nor/ocl.c +++ b/src/flash/nor/ocl.c @@ -17,6 +17,7 @@ * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ + #ifdef HAVE_CONFIG_H #include "config.h" #endif @@ -25,9 +26,7 @@ #include "ocl.h" #include - -struct ocl_priv -{ +struct ocl_priv { struct arm_jtag *jtag_info; unsigned int buflen; unsigned int bufalign; @@ -50,9 +49,7 @@ FLASH_BANK_COMMAND_HANDLER(ocl_flash_bank_command) struct ocl_priv *ocl; if (CMD_ARGC < 6) - { return ERROR_COMMAND_SYNTAX_ERROR; - } arm7_9 = target_to_arm7_9(bank->target); if (!is_arm7_9(arm7_9)) @@ -76,39 +73,36 @@ static int ocl_erase(struct flash_bank *bank, int first, int last) if (bank->num_sectors == 0) return ERROR_FLASH_BANK_NOT_PROBED; - if (bank->target->state != TARGET_RUNNING) - { + if (bank->target->state != TARGET_RUNNING) { LOG_ERROR("target has to be running to communicate with the loader"); return ERROR_TARGET_NOT_RUNNING; } - if ((first == 0) && (last == bank->num_sectors - 1)) - { + if ((first == 0) && (last == bank->num_sectors - 1)) { dcc_buffer[0] = OCL_ERASE_ALL; - if ((retval = embeddedice_send(ocl->jtag_info, dcc_buffer, 1) != ERROR_OK)) + retval = embeddedice_send(ocl->jtag_info, dcc_buffer, 1); + if (retval != ERROR_OK) return retval; - } - else - { + } else { dcc_buffer[0] = OCL_ERASE_BLOCK; dcc_buffer[1] = first; dcc_buffer[2] = last; - if ((retval = embeddedice_send(ocl->jtag_info, dcc_buffer, 3) != ERROR_OK)) + retval = embeddedice_send(ocl->jtag_info, dcc_buffer, 3); + if (retval != ERROR_OK) return retval; } /* wait for response, fixed timeout of 1 s */ - if ((retval = embeddedice_handshake(ocl->jtag_info, EICE_COMM_CTRL_WBIT, 1000) != ERROR_OK)) - { + retval = embeddedice_handshake(ocl->jtag_info, EICE_COMM_CTRL_WBIT, 1000); + if (retval != ERROR_OK) return retval; - } /* receive response */ - if ((retval = embeddedice_receive(ocl->jtag_info, dcc_buffer + 1, 1) != ERROR_OK)) + retval = embeddedice_receive(ocl->jtag_info, dcc_buffer + 1, 1); + if (retval != ERROR_OK) return retval; - if (dcc_buffer[1] != OCL_CMD_DONE) - { + if (dcc_buffer[1] != OCL_CMD_DONE) { if (dcc_buffer[0] == OCL_ERASE_ALL) LOG_ERROR("loader response to OCL_ERASE_ALL 0x%08" PRIx32 "", dcc_buffer[1]); else @@ -140,8 +134,7 @@ static int ocl_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, if (ocl->buflen == 0 || ocl->bufalign == 0) return ERROR_FLASH_BANK_NOT_PROBED; - if (bank->target->state != TARGET_RUNNING) - { + if (bank->target->state != TARGET_RUNNING) { LOG_ERROR("target has to be running to communicate with the loader"); return ERROR_TARGET_NOT_RUNNING; } @@ -149,8 +142,7 @@ static int ocl_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, /* allocate buffer for max. ocl buffer + overhead */ dcc_buffer = malloc(sizeof(uint32_t)*(ocl->buflen/4 + 3)); - while (count) - { + while (count) { if (count + (offset % ocl->bufalign) > ocl->buflen) runlen = ocl->buflen - (offset % ocl->bufalign); else @@ -165,10 +157,8 @@ static int ocl_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, chksum = OCL_CHKS_INIT; /* copy data to DCC buffer in proper byte order and properly aligned */ - for (i = 0; i < runlen; i++) - { - switch (byteofs++) - { + for (i = 0; i < runlen; i++) { + switch (byteofs++) { case 0: *dcc_bufptr &= *(buffer++) | 0xffffff00; break; @@ -194,28 +184,27 @@ static int ocl_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, *(dcc_bufptr++) = chksum; /* send the data */ - if ((retval = embeddedice_send(ocl->jtag_info, dcc_buffer, dcc_bufptr-dcc_buffer)) != ERROR_OK) - { + retval = embeddedice_send(ocl->jtag_info, dcc_buffer, dcc_bufptr-dcc_buffer); + if (retval != ERROR_OK) { free(dcc_buffer); return retval; } /* wait for response, fixed timeout of 1 s */ - if ((retval = embeddedice_handshake(ocl->jtag_info, EICE_COMM_CTRL_WBIT, 1000) != ERROR_OK)) - { + retval = embeddedice_handshake(ocl->jtag_info, EICE_COMM_CTRL_WBIT, 1000); + if (retval != ERROR_OK) { free(dcc_buffer); return retval; } /* receive response */ - if ((retval = embeddedice_receive(ocl->jtag_info, dcc_buffer, 1) != ERROR_OK)) - { + retval = embeddedice_receive(ocl->jtag_info, dcc_buffer, 1); + if (retval != ERROR_OK) { free(dcc_buffer); return retval; } - if (dcc_buffer[0] != OCL_CMD_DONE) - { + if (dcc_buffer[0] != OCL_CMD_DONE) { LOG_ERROR("loader response to OCL_FLASH_BLOCK 0x%08" PRIx32 "", dcc_buffer[0]); free(dcc_buffer); return ERROR_FLASH_OPERATION_FAILED; @@ -241,50 +230,61 @@ static int ocl_probe(struct flash_bank *bank) embeddedice_receive(ocl->jtag_info, dcc_buffer, 1); dcc_buffer[0] = OCL_PROBE; - if ((retval = embeddedice_send(ocl->jtag_info, dcc_buffer, 1) != ERROR_OK)) + retval = embeddedice_send(ocl->jtag_info, dcc_buffer, 1); + if (retval != ERROR_OK) return retval; /* wait for response, fixed timeout of 1 s */ - if ((retval = embeddedice_handshake(ocl->jtag_info, EICE_COMM_CTRL_WBIT, 1000) != ERROR_OK)) - { + retval = embeddedice_handshake(ocl->jtag_info, EICE_COMM_CTRL_WBIT, 1000); + if (retval != ERROR_OK) return retval; - } /* receive response */ - if ((retval = embeddedice_receive(ocl->jtag_info, dcc_buffer, 1) != ERROR_OK)) + retval = embeddedice_receive(ocl->jtag_info, dcc_buffer, 1); + if (retval != ERROR_OK) return retval; - if (dcc_buffer[0] != OCL_CMD_DONE) - { + if (dcc_buffer[0] != OCL_CMD_DONE) { LOG_ERROR("loader response to OCL_PROBE 0x%08" PRIx32 "", dcc_buffer[0]); return ERROR_FLASH_OPERATION_FAILED; } /* receive and fill in parameters, detection of loader is important, receive it one by one */ - if ((retval = embeddedice_handshake(ocl->jtag_info, EICE_COMM_CTRL_WBIT, 0) != ERROR_OK) - || (retval = embeddedice_receive(ocl->jtag_info, dcc_buffer, 1) != ERROR_OK)) + retval = embeddedice_handshake(ocl->jtag_info, EICE_COMM_CTRL_WBIT, 0); + if (retval != ERROR_OK) + return retval; + retval = embeddedice_receive(ocl->jtag_info, dcc_buffer, 1); + if (retval != ERROR_OK) return retval; bank->base = dcc_buffer[0]; - if ((retval = embeddedice_handshake(ocl->jtag_info, EICE_COMM_CTRL_WBIT, 0) != ERROR_OK) - || (retval = embeddedice_receive(ocl->jtag_info, dcc_buffer, 1) != ERROR_OK)) + retval = embeddedice_handshake(ocl->jtag_info, EICE_COMM_CTRL_WBIT, 0); + if (retval != ERROR_OK) + return retval; + retval = embeddedice_receive(ocl->jtag_info, dcc_buffer, 1); + if (retval != ERROR_OK) return retval; bank->size = dcc_buffer[0]; - if ((retval = embeddedice_handshake(ocl->jtag_info, EICE_COMM_CTRL_WBIT, 0) != ERROR_OK) - || (retval = embeddedice_receive(ocl->jtag_info, dcc_buffer, 1) != ERROR_OK)) + retval = embeddedice_handshake(ocl->jtag_info, EICE_COMM_CTRL_WBIT, 0); + if (retval != ERROR_OK) + return retval; + retval = embeddedice_receive(ocl->jtag_info, dcc_buffer, 1); + if (retval != ERROR_OK) return retval; bank->num_sectors = dcc_buffer[0]; - if ((retval = embeddedice_handshake(ocl->jtag_info, EICE_COMM_CTRL_WBIT, 0) != ERROR_OK) - || (retval = embeddedice_receive(ocl->jtag_info, dcc_buffer, 1) != ERROR_OK)) + retval = embeddedice_handshake(ocl->jtag_info, EICE_COMM_CTRL_WBIT, 0); + if (retval != ERROR_OK) + return retval; + retval = embeddedice_receive(ocl->jtag_info, dcc_buffer, 1); + if (retval != ERROR_OK) return retval; ocl->buflen = dcc_buffer[0] & 0xffff; ocl->bufalign = dcc_buffer[0] >> 16; bank->sectors = realloc(bank->sectors, sizeof(struct flash_sector)*bank->num_sectors); - if (bank->num_sectors == 0) - { + if (bank->num_sectors == 0) { LOG_ERROR("number of sectors shall be non zero value"); return ERROR_FLASH_BANK_INVALID; } @@ -293,8 +293,7 @@ static int ocl_probe(struct flash_bank *bank) return ERROR_FLASH_BANK_INVALID; } sectsize = bank->size / bank->num_sectors; - for (i = 0; i < bank->num_sectors; i++) - { + for (i = 0; i < bank->num_sectors; i++) { bank->sectors[i].offset = i * sectsize; bank->sectors[i].size = sectsize; bank->sectors[i].is_erased = -1; @@ -304,20 +303,17 @@ static int ocl_probe(struct flash_bank *bank) if (ocl->bufalign == 0) ocl->bufalign = 1; - if (ocl->buflen == 0) - { + if (ocl->buflen == 0) { LOG_ERROR("buflen shall be non zero value"); return ERROR_FLASH_BANK_INVALID; } - if ((ocl->bufalign > ocl->buflen) || (ocl->buflen % ocl->bufalign)) - { + if ((ocl->bufalign > ocl->buflen) || (ocl->buflen % ocl->bufalign)) { LOG_ERROR("buflen is not multiple of bufalign"); return ERROR_FLASH_BANK_INVALID; } - if (ocl->buflen % 4) - { + if (ocl->buflen % 4) { LOG_ERROR("buflen shall be divisible by 4"); return ERROR_FLASH_BANK_INVALID; } diff --git a/src/flash/nor/ocl.h b/src/flash/nor/ocl.h index d5c430be..052191bc 100644 --- a/src/flash/nor/ocl.h +++ b/src/flash/nor/ocl.h @@ -17,6 +17,7 @@ * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ + #ifndef OCL_H #define OCL_H diff --git a/src/flash/nor/pic32mx.c b/src/flash/nor/pic32mx.c index cc7d99c7..242780ff 100644 --- a/src/flash/nor/pic32mx.c +++ b/src/flash/nor/pic32mx.c @@ -23,6 +23,7 @@ * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ + #ifdef HAVE_CONFIG_H #include "config.h" #endif @@ -46,7 +47,7 @@ * Note: These macros only work for KSEG0/KSEG1 addresses. */ -#define Virt2Phys(v) ((v) & 0x1FFFFFFF) +#define Virt2Phys(v) ((v) & 0x1FFFFFFF) /* pic32mx configuration register locations */ @@ -90,8 +91,7 @@ #define NVMKEY1 0xAA996655 #define NVMKEY2 0x556699AA -struct pic32mx_flash_bank -{ +struct pic32mx_flash_bank { struct working_area *write_algorithm; int probed; }; @@ -171,9 +171,7 @@ FLASH_BANK_COMMAND_HANDLER(pic32mx_flash_bank_command) struct pic32mx_flash_bank *pic32mx_info; if (CMD_ARGC < 6) - { return ERROR_COMMAND_SYNTAX_ERROR; - } pic32mx_info = malloc(sizeof(struct pic32mx_flash_bank)); bank->driver_priv = pic32mx_info; @@ -199,8 +197,7 @@ static uint32_t pic32mx_wait_status_busy(struct flash_bank *bank, int timeout) uint32_t status; /* wait for busy to clear */ - while (((status = pic32mx_get_flash_status(bank)) & NVMCON_NVMWR) && (timeout-- > 0)) - { + while (((status = pic32mx_get_flash_status(bank)) & NVMCON_NVMWR) && (timeout-- > 0)) { LOG_DEBUG("status: 0x%" PRIx32, status); alive_sleep(1); } @@ -240,8 +237,7 @@ static int pic32mx_protect_check(struct flash_bank *bank) int s; int num_pages; - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -249,15 +245,13 @@ static int pic32mx_protect_check(struct flash_bank *bank) target_read_u32(target, PIC32MX_DEVCFG0, &devcfg0); if ((devcfg0 & (1 << 28)) == 0) /* code protect bit */ - num_pages = 0xffff; /* All pages protected */ - else if (Virt2Phys(bank->base) == PIC32MX_PHYS_BOOT_FLASH) - { + num_pages = 0xffff; /* All pages protected */ + else if (Virt2Phys(bank->base) == PIC32MX_PHYS_BOOT_FLASH) { if (devcfg0 & (1 << 24)) - num_pages = 0; /* All pages unprotected */ + num_pages = 0; /* All pages unprotected */ else - num_pages = 0xffff; /* All pages protected */ - } - else /* pgm flash */ + num_pages = 0xffff; /* All pages protected */ + } else /* pgm flash */ num_pages = (~devcfg0 >> 12) & 0xff; for (s = 0; s < bank->num_sectors && s < num_pages; s++) @@ -274,15 +268,13 @@ static int pic32mx_erase(struct flash_bank *bank, int first, int last) int i; uint32_t status; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } if ((first == 0) && (last == (bank->num_sectors - 1)) - && (Virt2Phys(bank->base) == PIC32MX_PHYS_PGM_FLASH)) - { + && (Virt2Phys(bank->base) == PIC32MX_PHYS_PGM_FLASH)) { /* this will only erase the Program Flash (PFM), not the Boot Flash (BFM) * we need to use the MTAP to perform a full erase */ LOG_DEBUG("Erasing entire program flash"); @@ -294,8 +286,7 @@ static int pic32mx_erase(struct flash_bank *bank, int first, int last) return ERROR_OK; } - for (i = first; i <= last; i++) - { + for (i = first; i <= last; i++) { target_write_u32(target, PIC32MX_NVMADDR, Virt2Phys(bank->base + bank->sectors[i].offset)); status = pic32mx_nvm_exec(bank, NVMCON_OP_PAGE_ERASE, 10); @@ -314,8 +305,7 @@ static int pic32mx_protect(struct flash_bank *bank, int set, int first, int last { struct target *target = bank->target; - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -381,7 +371,7 @@ static const uint32_t pic32mx_flash_write_code[] = { 0x1600FFFD, /* bne $s0, $zero, waitflash */ 0x00000000, /* nop */ 0x00000000, /* nop */ - 0x00000000, /* nop */ + 0x00000000, /* nop */ 0x00000000, /* nop */ 0x00000000, /* nop */ 0x8D510000, /* lw $s1, 0($t2) */ @@ -407,24 +397,20 @@ static int pic32mx_write_block(struct flash_bank *bank, uint8_t *buffer, /* flash write code */ if (target_alloc_working_area(target, sizeof(pic32mx_flash_write_code), - &pic32mx_info->write_algorithm) != ERROR_OK) - { + &pic32mx_info->write_algorithm) != ERROR_OK) { LOG_WARNING("no working area available, can't do block memory writes"); return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; }; - if ((retval = target_write_buffer(target, - pic32mx_info->write_algorithm->address, - sizeof(pic32mx_flash_write_code), - (uint8_t*)pic32mx_flash_write_code)) != ERROR_OK) + retval = target_write_buffer(target, pic32mx_info->write_algorithm->address, + sizeof(pic32mx_flash_write_code), (uint8_t *)pic32mx_flash_write_code); + if (retval != ERROR_OK) return retval; /* memory buffer */ - while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) - { + while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) { buffer_size /= 2; - if (buffer_size <= 256) - { + if (buffer_size <= 256) { /* if we already allocated the writing code, but failed to get a * buffer, free the algorithm */ if (pic32mx_info->write_algorithm) @@ -442,25 +428,24 @@ static int pic32mx_write_block(struct flash_bank *bank, uint8_t *buffer, init_reg_param(®_params[1], "a1", 32, PARAM_OUT); init_reg_param(®_params[2], "a2", 32, PARAM_OUT); - while (count > 0) - { + while (count > 0) { uint32_t status; uint32_t thisrun_count = (count > (buffer_size / 4)) ? (buffer_size / 4) : count; - if ((retval = target_write_buffer(target, source->address, - thisrun_count * 4, buffer)) != ERROR_OK) + retval = target_write_buffer(target, source->address, + thisrun_count * 4, buffer); + if (retval != ERROR_OK) break; buf_set_u32(reg_params[0].value, 0, 32, Virt2Phys(source->address)); buf_set_u32(reg_params[1].value, 0, 32, Virt2Phys(address)); buf_set_u32(reg_params[2].value, 0, 32, thisrun_count); - if ((retval = target_run_algorithm(target, 0, NULL, 3, reg_params, + retval = target_run_algorithm(target, 0, NULL, 3, reg_params, pic32mx_info->write_algorithm->address, - 0, - 10000, &mips32_info)) != ERROR_OK) - { + 0, 10000, &mips32_info); + if (retval != ERROR_OK) { LOG_ERROR("error executing pic32mx flash write algorithm"); retval = ERROR_FLASH_OPERATION_FAILED; break; @@ -468,15 +453,13 @@ static int pic32mx_write_block(struct flash_bank *bank, uint8_t *buffer, status = buf_get_u32(reg_params[0].value, 0, 32); - if (status & NVMCON_NVMERR) - { + if (status & NVMCON_NVMERR) { LOG_ERROR("Flash write error NVMERR (status = 0x%08" PRIx32 ")", status); retval = ERROR_FLASH_OPERATION_FAILED; break; } - if (status & NVMCON_LVDERR) - { + if (status & NVMCON_LVDERR) { LOG_ERROR("Flash write error LVDERR (status = 0x%08" PRIx32 ")", status); retval = ERROR_FLASH_OPERATION_FAILED; break; @@ -516,8 +499,7 @@ static int pic32mx_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offs uint32_t status; int retval; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -525,53 +507,43 @@ static int pic32mx_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offs LOG_DEBUG("writing to flash at address 0x%08" PRIx32 " at offset 0x%8.8" PRIx32 " count: 0x%8.8" PRIx32 "", bank->base, offset, count); - if (offset & 0x3) - { + if (offset & 0x3) { LOG_WARNING("offset 0x%" PRIx32 "breaks required 4-byte alignment", offset); return ERROR_FLASH_DST_BREAKS_ALIGNMENT; } /* multiple words (4-byte) to be programmed? */ - if (words_remaining > 0) - { + if (words_remaining > 0) { /* try using a block write */ - if ((retval = pic32mx_write_block(bank, buffer, offset, words_remaining)) != ERROR_OK) - { - if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) - { + retval = pic32mx_write_block(bank, buffer, offset, words_remaining); + if (retval != ERROR_OK) { + if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) { /* if block write failed (no sufficient working area), * we use normal (slow) single dword accesses */ LOG_WARNING("couldn't use block writes, falling back to single memory accesses"); - } - else if (retval == ERROR_FLASH_OPERATION_FAILED) - { + } else if (retval == ERROR_FLASH_OPERATION_FAILED) { LOG_ERROR("flash writing failed"); return retval; } - } - else - { + } else { buffer += words_remaining * 4; address += words_remaining * 4; words_remaining = 0; } } - while (words_remaining > 0) - { + while (words_remaining > 0) { uint32_t value; memcpy(&value, buffer + bytes_written, sizeof(uint32_t)); status = pic32mx_write_word(bank, address, value); - if (status & NVMCON_NVMERR) - { + if (status & NVMCON_NVMERR) { LOG_ERROR("Flash write error NVMERR (status = 0x%08" PRIx32 ")", status); return ERROR_FLASH_OPERATION_FAILED; } - if (status & NVMCON_LVDERR) - { + if (status & NVMCON_LVDERR) { LOG_ERROR("Flash write error LVDERR (status = 0x%08" PRIx32 ")", status); return ERROR_FLASH_OPERATION_FAILED; } @@ -581,21 +553,18 @@ static int pic32mx_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offs address += 4; } - if (bytes_remaining) - { + if (bytes_remaining) { uint32_t value = 0xffffffff; memcpy(&value, buffer + bytes_written, bytes_remaining); status = pic32mx_write_word(bank, address, value); - if (status & NVMCON_NVMERR) - { + if (status & NVMCON_NVMERR) { LOG_ERROR("Flash write error NVMERR (status = 0x%08" PRIx32 ")", status); return ERROR_FLASH_OPERATION_FAILED; } - if (status & NVMCON_LVDERR) - { + if (status & NVMCON_LVDERR) { LOG_ERROR("Flash write error LVDERR (status = 0x%08" PRIx32 ")", status); return ERROR_FLASH_OPERATION_FAILED; } @@ -631,8 +600,7 @@ static int pic32mx_probe(struct flash_bank *bank) page_size = 4096; - if (Virt2Phys(bank->base) == PIC32MX_PHYS_BOOT_FLASH) - { + if (Virt2Phys(bank->base) == PIC32MX_PHYS_BOOT_FLASH) { /* 0x1FC00000: Boot flash size */ #if 0 /* for some reason this register returns 8k for the boot bank size @@ -646,9 +614,7 @@ static int pic32mx_probe(struct flash_bank *bank) /* fixed 12k boot bank - see comments above */ num_pages = (12 * 1024); #endif - } - else - { + } else { /* read the flash size from the device */ if (target_read_u32(target, PIC32MX_BMXPFMSZ, &num_pages) != ERROR_OK) { LOG_WARNING("PIC32MX flash size failed, probe inaccurate - assuming 512k flash"); @@ -658,8 +624,7 @@ static int pic32mx_probe(struct flash_bank *bank) LOG_INFO("flash size = %" PRId32 "kbytes", num_pages / 1024); - if (bank->sectors) - { + if (bank->sectors) { free(bank->sectors); bank->sectors = NULL; } @@ -670,8 +635,7 @@ static int pic32mx_probe(struct flash_bank *bank) bank->num_sectors = num_pages; bank->sectors = malloc(sizeof(struct flash_sector) * num_pages); - for (i = 0; i < (int)num_pages; i++) - { + for (i = 0; i < (int)num_pages; i++) { bank->sectors[i].offset = i * page_size; bank->sectors[i].size = page_size; bank->sectors[i].is_erased = -1; @@ -709,17 +673,15 @@ static int pic32mx_info(struct flash_bank *bank, char *buf, int buf_size) return ERROR_FLASH_OPERATION_FAILED; } - for (i = 0; pic32mx_devs[i].name != NULL; i++) - { + for (i = 0; pic32mx_devs[i].name != NULL; i++) { if (pic32mx_devs[i].devid == (device_id & 0x0fffffff)) { printed = snprintf(buf, buf_size, "PIC32MX%s", pic32mx_devs[i].name); break; } } - if (pic32mx_devs[i].name == NULL) { + if (pic32mx_devs[i].name == NULL) printed = snprintf(buf, buf_size, "Unknown"); - } buf += printed; buf_size -= printed; @@ -735,9 +697,7 @@ COMMAND_HANDLER(pic32mx_handle_pgm_word_command) int status, res; if (CMD_ARGC != 3) - { return ERROR_COMMAND_SYNTAX_ERROR; - } COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], address); COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], value); @@ -747,8 +707,7 @@ COMMAND_HANDLER(pic32mx_handle_pgm_word_command) if (ERROR_OK != retval) return retval; - if (address < bank->base || address >= (bank->base + bank->size)) - { + if (address < bank->base || address >= (bank->base + bank->size)) { command_print(CMD_CTX, "flash address '%s' is out of bounds", CMD_ARGV[0]); return ERROR_OK; } @@ -776,8 +735,7 @@ COMMAND_HANDLER(pic32mx_handle_unlock_command) struct mips_ejtag *ejtag_info; int timeout = 10; - if (CMD_ARGC < 1) - { + if (CMD_ARGC < 1) { command_print(CMD_CTX, "pic32mx unlock "); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -798,8 +756,7 @@ COMMAND_HANDLER(pic32mx_handle_unlock_command) /* first check status of device */ mchip_cmd = MCHP_STATUS; mips_ejtag_drscan_8(ejtag_info, &mchip_cmd); - if (mchip_cmd & (1 << 7)) - { + if (mchip_cmd & (1 << 7)) { /* device is not locked */ command_print(CMD_CTX, "pic32mx is already unlocked, erasing anyway"); } @@ -812,8 +769,7 @@ COMMAND_HANDLER(pic32mx_handle_unlock_command) do { mchip_cmd = MCHP_STATUS; mips_ejtag_drscan_8(ejtag_info, &mchip_cmd); - if (timeout-- == 0) - { + if (timeout-- == 0) { LOG_DEBUG("timeout waiting for unlock: 0x%" PRIx32 "", mchip_cmd); break; } diff --git a/src/flash/nor/stellaris.c b/src/flash/nor/stellaris.c index 1aaa6e41..712077da 100644 --- a/src/flash/nor/stellaris.c +++ b/src/flash/nor/stellaris.c @@ -91,15 +91,14 @@ static void stellaris_read_clock_info(struct flash_bank *bank); static int stellaris_mass_erase(struct flash_bank *bank); -struct stellaris_flash_bank -{ +struct stellaris_flash_bank { /* chip id register */ uint32_t did0; uint32_t did1; uint32_t dc0; uint32_t dc1; - const char * target_name; + const char *target_name; uint8_t target_class; uint32_t sramsiz; @@ -123,8 +122,8 @@ struct stellaris_flash_bank const char *mck_desc; }; -// Autogenerated by contrib/gen-stellaris-part-header.pl -// From Stellaris Firmware Development Package revision 8049 +/* Autogenerated by contrib/gen-stellaris-part-header.pl */ +/* From Stellaris Firmware Development Package revision 8049 */ static struct { uint8_t class; uint8_t partno; @@ -415,8 +414,7 @@ static struct { {0xFF, 0x00, "Unknown Part"} }; -static char * StellarisClassname[7] = -{ +static char *StellarisClassname[7] = { "Sandstorm", "Fury", "Unknown", @@ -437,9 +435,7 @@ FLASH_BANK_COMMAND_HANDLER(stellaris_flash_bank_command) struct stellaris_flash_bank *stellaris_info; if (CMD_ARGC < 6) - { return ERROR_COMMAND_SYNTAX_ERROR; - } stellaris_info = calloc(sizeof(struct stellaris_flash_bank), 1); bank->base = 0x0; @@ -503,8 +499,7 @@ static int get_stellaris_info(struct flash_bank *bank, char *buf, int buf_size) buf += printed; buf_size -= printed; - if (stellaris_info->num_lockbits > 0) - { + if (stellaris_info->num_lockbits > 0) { snprintf(buf, buf_size, "pagesize: %" PRIi32 ", pages: %d, " @@ -532,7 +527,7 @@ static void stellaris_set_flash_timing(struct flash_bank *bank) if (stellaris_info->target_class > 1) return; - LOG_DEBUG("usecrl = %i",(int)(usecrl)); + LOG_DEBUG("usecrl = %i", (int)(usecrl)); target_write_u32(target, SCB_BASE | USECRL, usecrl); } @@ -613,8 +608,7 @@ static void stellaris_read_clock_info(struct flash_bank *bank) stellaris_info->mck_desc = ""; - switch (oscsrc) - { + switch (oscsrc) { case 0: /* MOSC */ mainfreq = rcc_xtal[xtal]; break; @@ -670,22 +664,19 @@ static int stellaris_read_part_info(struct flash_bank *bank) did0, did1, stellaris_info->dc0, stellaris_info->dc1); ver = did0 >> 28; - if ((ver != 0) && (ver != 1)) - { + if ((ver != 0) && (ver != 1)) { LOG_WARNING("Unknown did0 version, cannot identify target"); return ERROR_FLASH_OPERATION_FAILED; } - if (did1 == 0) - { + if (did1 == 0) { LOG_WARNING("Cannot identify target as a Stellaris"); return ERROR_FLASH_OPERATION_FAILED; } ver = did1 >> 28; fam = (did1 >> 24) & 0xF; - if (((ver != 0) && (ver != 1)) || (fam != 0)) - { + if (((ver != 0) && (ver != 1)) || (fam != 0)) { LOG_WARNING("Unknown did1 version/family."); return ERROR_FLASH_OPERATION_FAILED; } @@ -754,7 +745,7 @@ static int stellaris_read_part_info(struct flash_bank *bank) stellaris_info->did1 = did1; stellaris_info->num_lockbits = 1 + (stellaris_info->dc0 & 0xFFFF); - stellaris_info->num_pages = 2 *(1 + (stellaris_info->dc0 & 0xFFFF)); + stellaris_info->num_pages = 2 * (1 + (stellaris_info->dc0 & 0xFFFF)); stellaris_info->pagesize = 1024; stellaris_info->pages_in_lockregion = 2; @@ -823,8 +814,7 @@ static int stellaris_erase(struct flash_bank *bank, int first, int last) struct stellaris_flash_bank *stellaris_info = bank->driver_priv; struct target *target = bank->target; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -833,14 +823,10 @@ static int stellaris_erase(struct flash_bank *bank, int first, int last) return ERROR_FLASH_BANK_NOT_PROBED; if ((first < 0) || (last < first) || (last >= (int)stellaris_info->num_pages)) - { return ERROR_FLASH_SECTOR_INVALID; - } if ((first == 0) && (last == ((int)stellaris_info->num_pages-1))) - { return stellaris_mass_erase(bank); - } /* Refresh flash controller timing */ stellaris_read_clock_info(bank); @@ -854,24 +840,21 @@ static int stellaris_erase(struct flash_bank *bank, int first, int last) * it might want to process those IRQs. */ - for (banknr = first; banknr <= last; banknr++) - { + for (banknr = first; banknr <= last; banknr++) { /* Address is first word in page */ target_write_u32(target, FLASH_FMA, banknr * stellaris_info->pagesize); /* Write erase command */ target_write_u32(target, FLASH_FMC, FMC_WRKEY | FMC_ERASE); /* Wait until erase complete */ - do - { + do { target_read_u32(target, FLASH_FMC, &flash_fmc); - } - while (flash_fmc & FMC_ERASE); + } while (flash_fmc & FMC_ERASE); /* Check acess violations */ target_read_u32(target, FLASH_CRIS, &flash_cris); - if (flash_cris & (AMASK)) - { - LOG_WARNING("Error erasing flash page %i, flash_cris 0x%" PRIx32 "", banknr, flash_cris); + if (flash_cris & (AMASK)) { + LOG_WARNING("Error erasing flash page %i, flash_cris 0x%" PRIx32 "", + banknr, flash_cris); target_write_u32(target, FLASH_CRIS, 0); return ERROR_FLASH_OPERATION_FAILED; } @@ -890,14 +873,12 @@ static int stellaris_protect(struct flash_bank *bank, int set, int first, int la struct stellaris_flash_bank *stellaris_info = bank->driver_priv; struct target *target = bank->target; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - if (!set) - { + if (!set) { LOG_ERROR("Hardware doesn't support page-level unprotect. " "Try the 'recover' command."); return ERROR_COMMAND_SYNTAX_ERROR; @@ -909,8 +890,7 @@ static int stellaris_protect(struct flash_bank *bank, int set, int first, int la /* lockregions are 2 pages ... must protect [even..odd] */ if ((first < 0) || (first & 1) || (last < first) || !(last & 1) - || (last >= 2 * stellaris_info->num_lockbits)) - { + || (last >= 2 * stellaris_info->num_lockbits)) { LOG_ERROR("Can't protect unaligned or out-of-range pages."); return ERROR_FLASH_SECTOR_INVALID; } @@ -944,7 +924,7 @@ static int stellaris_protect(struct flash_bank *bank, int set, int first, int la * it might want to process those IRQs. */ - LOG_DEBUG("fmppe 0x%" PRIx32 "",fmppe); + LOG_DEBUG("fmppe 0x%" PRIx32 "", fmppe); target_write_u32(target, SCB_BASE | FMPPE, fmppe); /* Commit FMPPE */ @@ -960,16 +940,13 @@ static int stellaris_protect(struct flash_bank *bank, int set, int first, int la /* target_write_u32(target, FLASH_FMC, FMC_WRKEY | FMC_COMT); */ /* Wait until erase complete */ - do - { + do { target_read_u32(target, FLASH_FMC, &flash_fmc); - } - while (flash_fmc & FMC_COMT); + } while (flash_fmc & FMC_COMT); /* Check acess violations */ target_read_u32(target, FLASH_CRIS, &flash_cris); - if (flash_cris & (AMASK)) - { + if (flash_cris & (AMASK)) { LOG_WARNING("Error setting flash page protection, flash_cris 0x%" PRIx32 "", flash_cris); target_write_u32(target, FLASH_CRIS, 0); return ERROR_FLASH_OPERATION_FAILED; @@ -980,8 +957,7 @@ static int stellaris_protect(struct flash_bank *bank, int set, int first, int la /* see contib/loaders/flash/stellaris.s for src */ -static const uint8_t stellaris_write_code[] = -{ +static const uint8_t stellaris_write_code[] = { /* Call with : r0 = buffer address @@ -995,28 +971,28 @@ static const uint8_t stellaris_write_code[] = r6 = bytes written r7 = temp reg */ - 0x07,0x4B, /* ldr r3,pFLASH_CTRL_BASE */ - 0x08,0x4C, /* ldr r4,FLASHWRITECMD */ - 0x01,0x25, /* movs r5, 1 */ - 0x00,0x26, /* movs r6, #0 */ + 0x07, 0x4B, /* ldr r3,pFLASH_CTRL_BASE */ + 0x08, 0x4C, /* ldr r4,FLASHWRITECMD */ + 0x01, 0x25, /* movs r5, 1 */ + 0x00, 0x26, /* movs r6, #0 */ /* mainloop: */ - 0x19,0x60, /* str r1, [r3, #0] */ - 0x87,0x59, /* ldr r7, [r0, r6] */ - 0x5F,0x60, /* str r7, [r3, #4] */ - 0x9C,0x60, /* str r4, [r3, #8] */ + 0x19, 0x60, /* str r1, [r3, #0] */ + 0x87, 0x59, /* ldr r7, [r0, r6] */ + 0x5F, 0x60, /* str r7, [r3, #4] */ + 0x9C, 0x60, /* str r4, [r3, #8] */ /* waitloop: */ - 0x9F,0x68, /* ldr r7, [r3, #8] */ - 0x2F,0x42, /* tst r7, r5 */ - 0xFC,0xD1, /* bne waitloop */ - 0x04,0x31, /* adds r1, r1, #4 */ - 0x04,0x36, /* adds r6, r6, #4 */ - 0x96,0x42, /* cmp r6, r2 */ - 0xF4,0xD1, /* bne mainloop */ - 0x00,0xBE, /* bkpt #0 */ + 0x9F, 0x68, /* ldr r7, [r3, #8] */ + 0x2F, 0x42, /* tst r7, r5 */ + 0xFC, 0xD1, /* bne waitloop */ + 0x04, 0x31, /* adds r1, r1, #4 */ + 0x04, 0x36, /* adds r6, r6, #4 */ + 0x96, 0x42, /* cmp r6, r2 */ + 0xF4, 0xD1, /* bne mainloop */ + 0x00, 0xBE, /* bkpt #0 */ /* pFLASH_CTRL_BASE: */ - 0x00,0xD0,0x0F,0x40, /* .word 0x400FD000 */ + 0x00, 0xD0, 0x0F, 0x40, /* .word 0x400FD000 */ /* FLASHWRITECMD: */ - 0x01,0x00,0x42,0xA4 /* .word 0xA4420001 */ + 0x01, 0x00, 0x42, 0xA4 /* .word 0xA4420001 */ }; static int stellaris_write_block(struct flash_bank *bank, @@ -1042,8 +1018,8 @@ static int stellaris_write_block(struct flash_bank *bank, bank, buffer, offset, wcount); /* flash write code */ - if (target_alloc_working_area(target, sizeof(stellaris_write_code), &write_algorithm) != ERROR_OK) - { + if (target_alloc_working_area(target, sizeof(stellaris_write_code), + &write_algorithm) != ERROR_OK) { LOG_DEBUG("no working area for block memory writes"); return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; }; @@ -1053,11 +1029,9 @@ static int stellaris_write_block(struct flash_bank *bank, buffer_size = wcount * 4; /* memory buffer */ - while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) - { + while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) { buffer_size /= 2; - if (buffer_size <= buf_min) - { + if (buffer_size <= buf_min) { target_free_working_area(target, write_algorithm); return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; } @@ -1076,8 +1050,7 @@ static int stellaris_write_block(struct flash_bank *bank, init_reg_param(®_params[1], "r1", 32, PARAM_OUT); init_reg_param(®_params[2], "r2", 32, PARAM_OUT); - while (wcount > 0) - { + while (wcount > 0) { uint32_t thisrun_count = (wcount > (buffer_size / 4)) ? (buffer_size / 4) : wcount; target_write_buffer(target, source->address, thisrun_count * 4, buffer); @@ -1093,8 +1066,7 @@ static int stellaris_write_block(struct flash_bank *bank, write_algorithm->address, 0, 10000, &armv7m_info); - if (retval != ERROR_OK) - { + if (retval != ERROR_OK) { LOG_ERROR("error %d executing stellaris " "flash write algorithm", retval); @@ -1121,7 +1093,8 @@ static int stellaris_write_block(struct flash_bank *bank, return retval; } -static int stellaris_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, uint32_t count) +static int stellaris_write(struct flash_bank *bank, uint8_t *buffer, + uint32_t offset, uint32_t count) { struct stellaris_flash_bank *stellaris_info = bank->driver_priv; struct target *target = bank->target; @@ -1132,8 +1105,7 @@ static int stellaris_write(struct flash_bank *bank, uint8_t *buffer, uint32_t of uint32_t bytes_written = 0; int retval; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -1144,8 +1116,7 @@ static int stellaris_write(struct flash_bank *bank, uint8_t *buffer, uint32_t of if (stellaris_info->did1 == 0) return ERROR_FLASH_BANK_NOT_PROBED; - if (offset & 0x3) - { + if (offset & 0x3) { LOG_WARNING("offset size must be word aligned"); return ERROR_FLASH_DST_BREAKS_ALIGNMENT; } @@ -1166,36 +1137,28 @@ static int stellaris_write(struct flash_bank *bank, uint8_t *buffer, uint32_t of */ /* multiple words to be programmed? */ - if (words_remaining > 0) - { + if (words_remaining > 0) { /* try using a block write */ retval = stellaris_write_block(bank, buffer, offset, words_remaining); - if (retval != ERROR_OK) - { - if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) - { + if (retval != ERROR_OK) { + if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) { LOG_DEBUG("writing flash word-at-a-time"); - } - else if (retval == ERROR_FLASH_OPERATION_FAILED) - { + } else if (retval == ERROR_FLASH_OPERATION_FAILED) { /* if an error occured, we examine the reason, and quit */ target_read_u32(target, FLASH_CRIS, &flash_cris); LOG_ERROR("flash writing failed with CRIS: 0x%" PRIx32 "", flash_cris); return ERROR_FLASH_OPERATION_FAILED; } - } - else - { + } else { buffer += words_remaining * 4; address += words_remaining * 4; words_remaining = 0; } } - while (words_remaining > 0) - { + while (words_remaining > 0) { if (!(address & 0xff)) LOG_DEBUG("0x%" PRIx32 "", address); @@ -1205,8 +1168,7 @@ static int stellaris_write(struct flash_bank *bank, uint8_t *buffer, uint32_t of target_write_u32(target, FLASH_FMC, FMC_WRKEY | FMC_WRITE); /* LOG_DEBUG("0x%x 0x%x 0x%x",address,buf_get_u32(buffer, 0, 32),FMC_WRKEY | FMC_WRITE); */ /* Wait until write complete */ - do - { + do { target_read_u32(target, FLASH_FMC, &flash_fmc); } while (flash_fmc & FMC_WRITE); @@ -1215,8 +1177,7 @@ static int stellaris_write(struct flash_bank *bank, uint8_t *buffer, uint32_t of words_remaining--; } - if (bytes_remaining) - { + if (bytes_remaining) { uint8_t last_word[4] = {0xff, 0xff, 0xff, 0xff}; /* copy the last remaining bytes into the write buffer */ @@ -1231,16 +1192,14 @@ static int stellaris_write(struct flash_bank *bank, uint8_t *buffer, uint32_t of target_write_u32(target, FLASH_FMC, FMC_WRKEY | FMC_WRITE); /* LOG_DEBUG("0x%x 0x%x 0x%x",address,buf_get_u32(buffer, 0, 32),FMC_WRKEY | FMC_WRITE); */ /* Wait until write complete */ - do - { + do { target_read_u32(target, FLASH_FMC, &flash_fmc); } while (flash_fmc & FMC_WRITE); } /* Check access violations */ target_read_u32(target, FLASH_CRIS, &flash_cris); - if (flash_cris & (AMASK)) - { + if (flash_cris & (AMASK)) { LOG_DEBUG("flash_cris 0x%" PRIx32 "", flash_cris); return ERROR_FLASH_OPERATION_FAILED; } @@ -1266,8 +1225,7 @@ static int stellaris_probe(struct flash_bank *bank) if (retval != ERROR_OK) return retval; - if (bank->sectors) - { + if (bank->sectors) { free(bank->sectors); bank->sectors = NULL; } @@ -1276,8 +1234,7 @@ static int stellaris_probe(struct flash_bank *bank) bank->size = 1024 * stellaris_info->num_pages; bank->num_sectors = stellaris_info->num_pages; bank->sectors = calloc(bank->num_sectors, sizeof(struct flash_sector)); - for (int i = 0; i < bank->num_sectors; i++) - { + for (int i = 0; i < bank->num_sectors; i++) { bank->sectors[i].offset = i * stellaris_info->pagesize; bank->sectors[i].size = stellaris_info->pagesize; bank->sectors[i].is_erased = -1; @@ -1296,8 +1253,7 @@ static int stellaris_mass_erase(struct flash_bank *bank) stellaris_info = bank->driver_priv; target = bank->target; - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -1320,24 +1276,19 @@ static int stellaris_mass_erase(struct flash_bank *bank) target_write_u32(target, FLASH_FMA, 0); target_write_u32(target, FLASH_FMC, FMC_WRKEY | FMC_MERASE); /* Wait until erase complete */ - do - { + do { target_read_u32(target, FLASH_FMC, &flash_fmc); - } - while (flash_fmc & FMC_MERASE); + } while (flash_fmc & FMC_MERASE); /* if device has > 128k, then second erase cycle is needed * this is only valid for older devices, but will not hurt */ - if (stellaris_info->num_pages * stellaris_info->pagesize > 0x20000) - { + if (stellaris_info->num_pages * stellaris_info->pagesize > 0x20000) { target_write_u32(target, FLASH_FMA, 0x20000); target_write_u32(target, FLASH_FMC, FMC_WRKEY | FMC_MERASE); /* Wait until erase complete */ - do - { + do { target_read_u32(target, FLASH_FMC, &flash_fmc); - } - while (flash_fmc & FMC_MERASE); + } while (flash_fmc & FMC_MERASE); } return ERROR_OK; @@ -1348,29 +1299,21 @@ COMMAND_HANDLER(stellaris_handle_mass_erase_command) int i; if (CMD_ARGC < 1) - { return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); if (ERROR_OK != retval) return retval; - if (stellaris_mass_erase(bank) == ERROR_OK) - { + if (stellaris_mass_erase(bank) == ERROR_OK) { /* set all sectors as erased */ for (i = 0; i < bank->num_sectors; i++) - { bank->sectors[i].is_erased = 1; - } command_print(CMD_CTX, "stellaris mass erase complete"); - } - else - { + } else command_print(CMD_CTX, "stellaris mass erase failed"); - } return ERROR_OK; } diff --git a/src/flash/nor/stm32f1x.c b/src/flash/nor/stm32f1x.c index 02ab8c99..b3f78ca4 100644 --- a/src/flash/nor/stm32f1x.c +++ b/src/flash/nor/stm32f1x.c @@ -23,6 +23,7 @@ * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ + #ifdef HAVE_CONFIG_H #include "config.h" #endif @@ -101,15 +102,13 @@ #define KEY1 0x45670123 #define KEY2 0xCDEF89AB -struct stm32x_options -{ +struct stm32x_options { uint16_t RDP; uint16_t user_options; uint16_t protection[4]; }; -struct stm32x_flash_bank -{ +struct stm32x_flash_bank { struct stm32x_options option_bytes; struct working_area *write_algorithm; int ppage_size; @@ -129,9 +128,7 @@ FLASH_BANK_COMMAND_HANDLER(stm32x_flash_bank_command) struct stm32x_flash_bank *stm32x_info; if (CMD_ARGC < 6) - { return ERROR_COMMAND_SYNTAX_ERROR; - } stm32x_info = malloc(sizeof(struct stm32x_flash_bank)); bank->driver_priv = stm32x_info; @@ -163,37 +160,32 @@ static int stm32x_wait_status_busy(struct flash_bank *bank, int timeout) int retval = ERROR_OK; /* wait for busy to clear */ - for (;;) - { + for (;;) { retval = stm32x_get_flash_status(bank, &status); if (retval != ERROR_OK) return retval; LOG_DEBUG("status: 0x%" PRIx32 "", status); if ((status & FLASH_BSY) == 0) break; - if (timeout-- <= 0) - { + if (timeout-- <= 0) { LOG_ERROR("timed out waiting for flash"); return ERROR_FAIL; } alive_sleep(1); } - if (status & FLASH_WRPRTERR) - { + if (status & FLASH_WRPRTERR) { LOG_ERROR("stm32x device protected"); retval = ERROR_FAIL; } - if (status & FLASH_PGERR) - { + if (status & FLASH_PGERR) { LOG_ERROR("stm32x device programming failed"); retval = ERROR_FAIL; } /* Clear but report errors */ - if (status & (FLASH_WRPRTERR | FLASH_PGERR)) - { + if (status & (FLASH_WRPRTERR | FLASH_PGERR)) { /* If this operation fails, we ignore it and report the original * retval */ @@ -209,8 +201,7 @@ int stm32x_check_operation_supported(struct flash_bank *bank) /* if we have a dual flash bank device then * we need to perform option byte stuff on bank0 only */ - if (stm32x_info->register_base != FLASH_REG_BASE_B0) - { + if (stm32x_info->register_base != FLASH_REG_BASE_B0) { LOG_ERROR("Option Byte Operation's must use bank0"); return ERROR_FLASH_OPERATION_FAILED; } @@ -395,8 +386,7 @@ static int stm32x_protect_check(struct flash_bank *bank) int num_bits; int set; - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -415,8 +405,7 @@ static int stm32x_protect_check(struct flash_bank *bank) * high density - each protection bit is for 2 * 2K pages */ num_bits = (bank->num_sectors / stm32x_info->ppage_size); - if (stm32x_info->ppage_size == 2) - { + if (stm32x_info->ppage_size == 2) { /* high density flash/connectivity line protection */ set = 1; @@ -427,15 +416,12 @@ static int stm32x_protect_check(struct flash_bank *bank) /* bit 31 controls sector 62 - 255 protection for high density * bit 31 controls sector 62 - 127 protection for connectivity line */ for (s = 62; s < bank->num_sectors; s++) - { bank->sectors[s].is_protected = set; - } if (bank->num_sectors > 61) num_bits = 31; - for (i = 0; i < num_bits; i++) - { + for (i = 0; i < num_bits; i++) { set = 1; if (protection & (1 << i)) @@ -444,12 +430,9 @@ static int stm32x_protect_check(struct flash_bank *bank) for (s = 0; s < stm32x_info->ppage_size; s++) bank->sectors[(i * stm32x_info->ppage_size) + s].is_protected = set; } - } - else - { + } else { /* low/medium density flash protection */ - for (i = 0; i < num_bits; i++) - { + for (i = 0; i < num_bits; i++) { set = 1; if (protection & (1 << i)) @@ -468,16 +451,13 @@ static int stm32x_erase(struct flash_bank *bank, int first, int last) struct target *target = bank->target; int i; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } if ((first == 0) && (last == (bank->num_sectors - 1))) - { return stm32x_mass_erase(bank); - } /* unlock flash registers */ int retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY1); @@ -487,8 +467,7 @@ static int stm32x_erase(struct flash_bank *bank, int first, int last) if (retval != ERROR_OK) return retval; - for (i = first; i <= last; i++) - { + for (i = first; i <= last; i++) { retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_PER); if (retval != ERROR_OK) return retval; @@ -526,8 +505,7 @@ static int stm32x_protect(struct flash_bank *bank, int set, int first, int last) stm32x_info = bank->driver_priv; - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -536,14 +514,12 @@ static int stm32x_protect(struct flash_bank *bank, int set, int first, int last) if (ERROR_OK != retval) return retval; - if ((first % stm32x_info->ppage_size) != 0) - { + if ((first % stm32x_info->ppage_size) != 0) { LOG_WARNING("aligned start protect sector to a %d sector boundary", stm32x_info->ppage_size); first = first - (first % stm32x_info->ppage_size); } - if (((last + 1) % stm32x_info->ppage_size) != 0) - { + if (((last + 1) % stm32x_info->ppage_size) != 0) { LOG_WARNING("aligned end protect sector to a %d sector boundary", stm32x_info->ppage_size); last++; @@ -562,13 +538,11 @@ static int stm32x_protect(struct flash_bank *bank, int set, int first, int last) prot_reg[2] = (uint16_t)(protection >> 16); prot_reg[3] = (uint16_t)(protection >> 24); - if (stm32x_info->ppage_size == 2) - { + if (stm32x_info->ppage_size == 2) { /* high density flash */ /* bit 7 controls sector 62 - 255 protection */ - if (last > 61) - { + if (last > 61) { if (set) prot_reg[3] &= ~(1 << 7); else @@ -580,8 +554,7 @@ static int stm32x_protect(struct flash_bank *bank, int set, int first, int last) if (last > 61) last = 61; - for (i = first; i <= last; i++) - { + for (i = first; i <= last; i++) { reg = (i / stm32x_info->ppage_size) / 8; bit = (i / stm32x_info->ppage_size) - (reg * 8); @@ -590,12 +563,9 @@ static int stm32x_protect(struct flash_bank *bank, int set, int first, int last) else prot_reg[reg] |= (1 << bit); } - } - else - { + } else { /* medium density flash */ - for (i = first; i <= last; i++) - { + for (i = first; i <= last; i++) { reg = (i / stm32x_info->ppage_size) / 8; bit = (i / stm32x_info->ppage_size) - (reg * 8); @@ -606,7 +576,8 @@ static int stm32x_protect(struct flash_bank *bank, int set, int first, int last) } } - if ((status = stm32x_erase_options(bank)) != ERROR_OK) + status = stm32x_erase_options(bank); + if (status != ERROR_OK) return status; stm32x_info->option_bytes.protection[0] = prot_reg[0]; @@ -675,24 +646,21 @@ static int stm32x_write_block(struct flash_bank *bank, uint8_t *buffer, /* flash write code */ if (target_alloc_working_area(target, sizeof(stm32x_flash_write_code), - &stm32x_info->write_algorithm) != ERROR_OK) - { + &stm32x_info->write_algorithm) != ERROR_OK) { LOG_WARNING("no working area available, can't do block memory writes"); return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; }; - if ((retval = target_write_buffer(target, stm32x_info->write_algorithm->address, - sizeof(stm32x_flash_write_code), - (uint8_t*)stm32x_flash_write_code)) != ERROR_OK) + retval = target_write_buffer(target, stm32x_info->write_algorithm->address, + sizeof(stm32x_flash_write_code), (uint8_t *)stm32x_flash_write_code); + if (retval != ERROR_OK) return retval; /* memory buffer */ - while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) - { + while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) { buffer_size /= 2; - buffer_size &= ~3UL; // Make sure it's 4 byte aligned - if (buffer_size <= 256) - { + buffer_size &= ~3UL; /* Make sure it's 4 byte aligned */ + if (buffer_size <= 256) { /* if we already allocated the writing code, but failed to get a * buffer, free the algorithm */ if (stm32x_info->write_algorithm) @@ -736,35 +704,31 @@ static int stm32x_write_block(struct flash_bank *bank, uint8_t *buffer, armv7m_info.core_mode = ARMV7M_MODE_ANY; /* Start up algorithm on target and let it idle while writing the first chunk */ - if ((retval = target_start_algorithm(target, 0, NULL, 5, reg_params, + retval = target_start_algorithm(target, 0, NULL, 5, reg_params, stm32x_info->write_algorithm->address, 0, - &armv7m_info)) != ERROR_OK) - { + &armv7m_info); + if (retval != ERROR_OK) { LOG_ERROR("error starting stm32x flash write algorithm"); goto cleanup; } - while (count > 0) - { + while (count > 0) { retval = target_read_u32(target, rp_addr, &rp); - if (retval != ERROR_OK) - { + if (retval != ERROR_OK) { LOG_ERROR("failed to get read pointer"); break; } LOG_DEBUG("count 0x%"PRIx32" wp 0x%"PRIx32" rp 0x%"PRIx32, count, wp, rp); - if (rp == 0) - { + if (rp == 0) { LOG_ERROR("flash write algorithm aborted by target"); retval = ERROR_FLASH_OPERATION_FAILED; break; } - if ((rp & 1) || rp < fifo_start_addr || rp >= fifo_end_addr) - { + if ((rp & 1) || rp < fifo_start_addr || rp >= fifo_end_addr) { LOG_ERROR("corrupted fifo read pointer 0x%"PRIx32, rp); break; } @@ -780,8 +744,7 @@ static int stm32x_write_block(struct flash_bank *bank, uint8_t *buffer, else thisrun_bytes = fifo_end_addr - wp - 2; - if (thisrun_bytes == 0) - { + if (thisrun_bytes == 0) { /* Throttle polling a bit if transfer is (much) faster than flash * programming. The exact delay shouldn't matter as long as it's * less than buffer size / flash speed. This is very unlikely to @@ -812,36 +775,29 @@ static int stm32x_write_block(struct flash_bank *bank, uint8_t *buffer, break; } - if (retval != ERROR_OK) - { + if (retval != ERROR_OK) { /* abort flash write algorithm on target */ target_write_u32(target, wp_addr, 0); } - int retval2; - if ((retval2 = target_wait_algorithm(target, 0, NULL, 5, reg_params, - 0, - 10000, - &armv7m_info)) != ERROR_OK) - { + int retval2 = target_wait_algorithm(target, 0, NULL, 5, reg_params, + 0, 10000, &armv7m_info); + if (retval2 != ERROR_OK) { LOG_ERROR("error waiting for stm32x flash write algorithm"); retval = retval2; } - if (retval == ERROR_FLASH_OPERATION_FAILED) - { + if (retval == ERROR_FLASH_OPERATION_FAILED) { LOG_ERROR("flash write failed at address 0x%"PRIx32, buf_get_u32(reg_params[4].value, 0, 32)); - if (buf_get_u32(reg_params[0].value, 0, 32) & FLASH_PGERR) - { + if (buf_get_u32(reg_params[0].value, 0, 32) & FLASH_PGERR) { LOG_ERROR("flash memory not erased before writing"); /* Clear but report errors */ target_write_u32(target, STM32_FLASH_SR_B0, FLASH_PGERR); } - if (buf_get_u32(reg_params[0].value, 0, 32) & FLASH_WRPRTERR) - { + if (buf_get_u32(reg_params[0].value, 0, 32) & FLASH_WRPRTERR) { LOG_ERROR("flash memory write protected"); /* Clear but report errors */ target_write_u32(target, STM32_FLASH_SR_B0, FLASH_WRPRTERR); @@ -871,14 +827,12 @@ static int stm32x_write(struct flash_bank *bank, uint8_t *buffer, uint32_t bytes_written = 0; int retval; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - if (offset & 0x1) - { + if (offset & 0x1) { LOG_WARNING("offset 0x%" PRIx32 " breaks required 2-byte alignment", offset); return ERROR_FLASH_DST_BREAKS_ALIGNMENT; } @@ -892,20 +846,16 @@ static int stm32x_write(struct flash_bank *bank, uint8_t *buffer, return retval; /* multiple half words (2-byte) to be programmed? */ - if (words_remaining > 0) - { + if (words_remaining > 0) { /* try using a block write */ - if ((retval = stm32x_write_block(bank, buffer, offset, words_remaining)) != ERROR_OK) - { - if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) - { + retval = stm32x_write_block(bank, buffer, offset, words_remaining); + if (retval != ERROR_OK) { + if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) { /* if block write failed (no sufficient working area), * we use normal (slow) single dword accesses */ LOG_WARNING("couldn't use block writes, falling back to single memory accesses"); } - } - else - { + } else { buffer += words_remaining * 2; address += words_remaining * 2; words_remaining = 0; @@ -915,8 +865,7 @@ static int stm32x_write(struct flash_bank *bank, uint8_t *buffer, if ((retval != ERROR_OK) && (retval != ERROR_TARGET_RESOURCE_NOT_AVAILABLE)) return retval; - while (words_remaining > 0) - { + while (words_remaining > 0) { uint16_t value; memcpy(&value, buffer + bytes_written, sizeof(uint16_t)); @@ -936,8 +885,7 @@ static int stm32x_write(struct flash_bank *bank, uint8_t *buffer, address += 2; } - if (bytes_remaining) - { + if (bytes_remaining) { uint16_t value = 0xffff; memcpy(&value, buffer + bytes_written, bytes_remaining); @@ -977,8 +925,7 @@ static int stm32x_probe(struct flash_bank *bank) /* get flash size from target. */ retval = target_read_u16(target, 0x1FFFF7E0, &flash_size_in_kb); - if (retval != ERROR_OK) - { + if (retval != ERROR_OK) { LOG_WARNING("failed reading flash size, default to max target family"); /* failed reading flash size, default to max target family */ flash_size_in_kb = 0xffff; @@ -991,8 +938,7 @@ static int stm32x_probe(struct flash_bank *bank) stm32x_info->ppage_size = 4; /* check for early silicon */ - if (flash_size_in_kb == 0xffff) - { + if (flash_size_in_kb == 0xffff) { /* number of sectors incorrect on revA */ LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 128k flash"); flash_size_in_kb = 128; @@ -1004,8 +950,7 @@ static int stm32x_probe(struct flash_bank *bank) stm32x_info->ppage_size = 4; /* check for early silicon */ - if (flash_size_in_kb == 0xffff) - { + if (flash_size_in_kb == 0xffff) { /* number of sectors incorrect on revA */ LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 32k flash"); flash_size_in_kb = 32; @@ -1017,8 +962,7 @@ static int stm32x_probe(struct flash_bank *bank) stm32x_info->ppage_size = 2; /* check for early silicon */ - if (flash_size_in_kb == 0xffff) - { + if (flash_size_in_kb == 0xffff) { /* number of sectors incorrect on revZ */ LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 512k flash"); flash_size_in_kb = 512; @@ -1030,8 +974,7 @@ static int stm32x_probe(struct flash_bank *bank) stm32x_info->ppage_size = 2; /* check for early silicon */ - if (flash_size_in_kb == 0xffff) - { + if (flash_size_in_kb == 0xffff) { /* number of sectors incorrect on revZ */ LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 256k flash"); flash_size_in_kb = 256; @@ -1043,8 +986,7 @@ static int stm32x_probe(struct flash_bank *bank) stm32x_info->ppage_size = 4; /* check for early silicon */ - if (flash_size_in_kb == 0xffff) - { + if (flash_size_in_kb == 0xffff) { /* number of sectors may be incorrrect on early silicon */ LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 128k flash"); flash_size_in_kb = 128; @@ -1056,8 +998,7 @@ static int stm32x_probe(struct flash_bank *bank) stm32x_info->ppage_size = 4; /* check for early silicon */ - if (flash_size_in_kb == 0xffff) - { + if (flash_size_in_kb == 0xffff) { /* number of sectors may be incorrrect on early silicon */ LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 128k flash"); flash_size_in_kb = 128; @@ -1070,29 +1011,23 @@ static int stm32x_probe(struct flash_bank *bank) stm32x_info->has_dual_banks = true; /* check for early silicon */ - if (flash_size_in_kb == 0xffff) - { + if (flash_size_in_kb == 0xffff) { /* number of sectors may be incorrrect on early silicon */ LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 1024k flash"); flash_size_in_kb = 1024; } /* split reported size into matching bank */ - if (bank->base != 0x08080000) - { + if (bank->base != 0x08080000) { /* bank 0 will be fixed 512k */ flash_size_in_kb = 512; - } - else - { + } else { flash_size_in_kb -= 512; /* bank1 also uses a register offset */ stm32x_info->register_base = FLASH_REG_BASE_B1; base_address = 0x08080000; } - } - else - { + } else { LOG_WARNING("Cannot identify target as a STM32 family."); return ERROR_FAIL; } @@ -1108,8 +1043,7 @@ static int stm32x_probe(struct flash_bank *bank) /* check that calculation result makes sense */ assert(num_pages > 0); - if (bank->sectors) - { + if (bank->sectors) { free(bank->sectors); bank->sectors = NULL; } @@ -1119,8 +1053,7 @@ static int stm32x_probe(struct flash_bank *bank) bank->num_sectors = num_pages; bank->sectors = malloc(sizeof(struct flash_sector) * num_pages); - for (i = 0; i < num_pages; i++) - { + for (i = 0; i < num_pages; i++) { bank->sectors[i].offset = i * page_size; bank->sectors[i].size = page_size; bank->sectors[i].is_erased = -1; @@ -1163,8 +1096,7 @@ static int get_stm32x_info(struct flash_bank *bank, char *buf, int buf_size) buf += printed; buf_size -= printed; - switch (device_id >> 16) - { + switch (device_id >> 16) { case 0x0000: snprintf(buf, buf_size, "A"); break; @@ -1190,8 +1122,7 @@ static int get_stm32x_info(struct flash_bank *bank, char *buf, int buf_size) buf += printed; buf_size -= printed; - switch (device_id >> 16) - { + switch (device_id >> 16) { case 0x1000: snprintf(buf, buf_size, "A"); break; @@ -1205,8 +1136,7 @@ static int get_stm32x_info(struct flash_bank *bank, char *buf, int buf_size) buf += printed; buf_size -= printed; - switch (device_id >> 16) - { + switch (device_id >> 16) { case 0x1000: snprintf(buf, buf_size, "A"); break; @@ -1224,8 +1154,7 @@ static int get_stm32x_info(struct flash_bank *bank, char *buf, int buf_size) buf += printed; buf_size -= printed; - switch (device_id >> 16) - { + switch (device_id >> 16) { case 0x1000: snprintf(buf, buf_size, "A"); break; @@ -1243,8 +1172,7 @@ static int get_stm32x_info(struct flash_bank *bank, char *buf, int buf_size) buf += printed; buf_size -= printed; - switch (device_id >> 16) - { + switch (device_id >> 16) { case 0x1000: snprintf(buf, buf_size, "A"); break; @@ -1262,8 +1190,7 @@ static int get_stm32x_info(struct flash_bank *bank, char *buf, int buf_size) buf += printed; buf_size -= printed; - switch (device_id >> 16) - { + switch (device_id >> 16) { case 0x1000: snprintf(buf, buf_size, "A"); break; @@ -1281,8 +1208,7 @@ static int get_stm32x_info(struct flash_bank *bank, char *buf, int buf_size) buf += printed; buf_size -= printed; - switch (device_id >> 16) - { + switch (device_id >> 16) { case 0x1000: snprintf(buf, buf_size, "A"); break; @@ -1291,9 +1217,7 @@ static int get_stm32x_info(struct flash_bank *bank, char *buf, int buf_size) snprintf(buf, buf_size, "unknown"); break; } - } - else - { + } else { snprintf(buf, buf_size, "Cannot identify target as a stm32x\n"); return ERROR_FAIL; } @@ -1307,9 +1231,7 @@ COMMAND_HANDLER(stm32x_handle_lock_command) struct stm32x_flash_bank *stm32x_info = NULL; if (CMD_ARGC < 1) - { return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); @@ -1320,8 +1242,7 @@ COMMAND_HANDLER(stm32x_handle_lock_command) target = bank->target; - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -1330,8 +1251,7 @@ COMMAND_HANDLER(stm32x_handle_lock_command) if (ERROR_OK != retval) return retval; - if (stm32x_erase_options(bank) != ERROR_OK) - { + if (stm32x_erase_options(bank) != ERROR_OK) { command_print(CMD_CTX, "stm32x failed to erase options"); return ERROR_OK; } @@ -1339,8 +1259,7 @@ COMMAND_HANDLER(stm32x_handle_lock_command) /* set readout protection */ stm32x_info->option_bytes.RDP = 0; - if (stm32x_write_options(bank) != ERROR_OK) - { + if (stm32x_write_options(bank) != ERROR_OK) { command_print(CMD_CTX, "stm32x failed to lock device"); return ERROR_OK; } @@ -1355,9 +1274,7 @@ COMMAND_HANDLER(stm32x_handle_unlock_command) struct target *target = NULL; if (CMD_ARGC < 1) - { return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); @@ -1366,8 +1283,7 @@ COMMAND_HANDLER(stm32x_handle_unlock_command) target = bank->target; - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -1376,14 +1292,12 @@ COMMAND_HANDLER(stm32x_handle_unlock_command) if (ERROR_OK != retval) return retval; - if (stm32x_erase_options(bank) != ERROR_OK) - { + if (stm32x_erase_options(bank) != ERROR_OK) { command_print(CMD_CTX, "stm32x failed to unlock device"); return ERROR_OK; } - if (stm32x_write_options(bank) != ERROR_OK) - { + if (stm32x_write_options(bank) != ERROR_OK) { command_print(CMD_CTX, "stm32x failed to lock device"); return ERROR_OK; } @@ -1402,9 +1316,7 @@ COMMAND_HANDLER(stm32x_handle_options_read_command) struct stm32x_flash_bank *stm32x_info = NULL; if (CMD_ARGC < 1) - { return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); @@ -1415,8 +1327,7 @@ COMMAND_HANDLER(stm32x_handle_options_read_command) target = bank->target; - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -1430,32 +1341,31 @@ COMMAND_HANDLER(stm32x_handle_options_read_command) return retval; command_print(CMD_CTX, "Option Byte: 0x%" PRIx32 "", optionbyte); - if (buf_get_u32((uint8_t*)&optionbyte, OPT_ERROR, 1)) + if (buf_get_u32((uint8_t *)&optionbyte, OPT_ERROR, 1)) command_print(CMD_CTX, "Option Byte Complement Error"); - if (buf_get_u32((uint8_t*)&optionbyte, OPT_READOUT, 1)) + if (buf_get_u32((uint8_t *)&optionbyte, OPT_READOUT, 1)) command_print(CMD_CTX, "Readout Protection On"); else command_print(CMD_CTX, "Readout Protection Off"); - if (buf_get_u32((uint8_t*)&optionbyte, OPT_RDWDGSW, 1)) + if (buf_get_u32((uint8_t *)&optionbyte, OPT_RDWDGSW, 1)) command_print(CMD_CTX, "Software Watchdog"); else command_print(CMD_CTX, "Hardware Watchdog"); - if (buf_get_u32((uint8_t*)&optionbyte, OPT_RDRSTSTOP, 1)) + if (buf_get_u32((uint8_t *)&optionbyte, OPT_RDRSTSTOP, 1)) command_print(CMD_CTX, "Stop: No reset generated"); else command_print(CMD_CTX, "Stop: Reset generated"); - if (buf_get_u32((uint8_t*)&optionbyte, OPT_RDRSTSTDBY, 1)) + if (buf_get_u32((uint8_t *)&optionbyte, OPT_RDRSTSTDBY, 1)) command_print(CMD_CTX, "Standby: No reset generated"); else command_print(CMD_CTX, "Standby: Reset generated"); - if (stm32x_info->has_dual_banks) - { - if (buf_get_u32((uint8_t*)&optionbyte, OPT_BFB2, 1)) + if (stm32x_info->has_dual_banks) { + if (buf_get_u32((uint8_t *)&optionbyte, OPT_BFB2, 1)) command_print(CMD_CTX, "Boot: Bank 0"); else command_print(CMD_CTX, "Boot: Bank 1"); @@ -1471,9 +1381,7 @@ COMMAND_HANDLER(stm32x_handle_options_write_command) uint16_t optionbyte = 0xF8; if (CMD_ARGC < 4) - { return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); @@ -1484,8 +1392,7 @@ COMMAND_HANDLER(stm32x_handle_options_write_command) target = bank->target; - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -1500,57 +1407,38 @@ COMMAND_HANDLER(stm32x_handle_options_write_command) /* OPT_RDWDGSW */ if (strcmp(CMD_ARGV[1], "SWWDG") == 0) - { optionbyte |= (1 << 0); - } else /* REVISIT must be "HWWDG" then ... */ - { optionbyte &= ~(1 << 0); - } /* OPT_RDRSTSTOP */ if (strcmp(CMD_ARGV[2], "NORSTSTOP") == 0) - { optionbyte |= (1 << 1); - } else /* REVISIT must be "RSTSTNDBY" then ... */ - { optionbyte &= ~(1 << 1); - } /* OPT_RDRSTSTDBY */ if (strcmp(CMD_ARGV[3], "NORSTSTNDBY") == 0) - { optionbyte |= (1 << 2); - } else /* REVISIT must be "RSTSTOP" then ... */ - { optionbyte &= ~(1 << 2); - } - if (CMD_ARGC > 4 && stm32x_info->has_dual_banks) - { + if (CMD_ARGC > 4 && stm32x_info->has_dual_banks) { /* OPT_BFB2 */ if (strcmp(CMD_ARGV[4], "BOOT0") == 0) - { optionbyte |= (1 << 3); - } else - { optionbyte &= ~(1 << 3); - } } - if (stm32x_erase_options(bank) != ERROR_OK) - { + if (stm32x_erase_options(bank) != ERROR_OK) { command_print(CMD_CTX, "stm32x failed to erase options"); return ERROR_OK; } stm32x_info->option_bytes.user_options = optionbyte; - if (stm32x_write_options(bank) != ERROR_OK) - { + if (stm32x_write_options(bank) != ERROR_OK) { command_print(CMD_CTX, "stm32x failed to write options"); return ERROR_OK; } @@ -1566,8 +1454,7 @@ static int stm32x_mass_erase(struct flash_bank *bank) { struct target *target = bank->target; - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -1584,7 +1471,8 @@ static int stm32x_mass_erase(struct flash_bank *bank) retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_MER); if (retval != ERROR_OK) return retval; - retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_MER | FLASH_STRT); + retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), + FLASH_MER | FLASH_STRT); if (retval != ERROR_OK) return retval; @@ -1604,9 +1492,7 @@ COMMAND_HANDLER(stm32x_handle_mass_erase_command) int i; if (CMD_ARGC < 1) - { return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); @@ -1614,20 +1500,14 @@ COMMAND_HANDLER(stm32x_handle_mass_erase_command) return retval; retval = stm32x_mass_erase(bank); - if (retval == ERROR_OK) - { + if (retval == ERROR_OK) { /* set all sectors as erased */ for (i = 0; i < bank->num_sectors; i++) - { bank->sectors[i].is_erased = 1; - } command_print(CMD_CTX, "stm32x mass erase complete"); - } - else - { + } else command_print(CMD_CTX, "stm32x mass erase failed"); - } return retval; } diff --git a/src/flash/nor/stm32f2x.c b/src/flash/nor/stm32f2x.c index 4d3571ca..efc36138 100644 --- a/src/flash/nor/stm32f2x.c +++ b/src/flash/nor/stm32f2x.c @@ -23,6 +23,7 @@ * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ + #ifdef HAVE_CONFIG_H #include "config.h" #endif @@ -70,7 +71,8 @@ * http://www.st.com/internet/mcu/product/250192.jsp * * PM0059 - * www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/PROGRAMMING_MANUAL/CD00233952.pdf + * www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/ + * PROGRAMMING_MANUAL/CD00233952.pdf * * STM32F1x series - notice that this code was copy, pasted and knocked * into a stm32f2x driver, so in case something has been converted or @@ -85,11 +87,10 @@ * */ - // Erase time can be as high as 1000ms, 10x this and it's toast... +/* Erase time can be as high as 1000ms, 10x this and it's toast... */ #define FLASH_ERASE_TIMEOUT 10000 #define FLASH_WRITE_TIMEOUT 5 - #define STM32_FLASH_BASE 0x40023c00 #define STM32_FLASH_ACR 0x40023c00 #define STM32_FLASH_KEYR 0x40023c04 @@ -99,8 +100,6 @@ #define STM32_FLASH_OPTCR 0x40023c14 #define STM32_FLASH_OBR 0x40023c1C - - /* option byte location */ #define STM32_OB_RDP 0x1FFFF800 @@ -122,19 +121,19 @@ #define FLASH_PSIZE_16 (1 << 8) #define FLASH_PSIZE_32 (2 << 8) #define FLASH_PSIZE_64 (3 << 8) -#define FLASH_SNB(a) ((a) << 3) +#define FLASH_SNB(a) ((a) << 3) #define FLASH_LOCK (1 << 31) /* FLASH_SR register bits */ #define FLASH_BSY (1 << 16) -#define FLASH_PGSERR (1 << 7) // Programming sequence error -#define FLASH_PGPERR (1 << 6) // Programming parallelism error -#define FLASH_PGAERR (1 << 5) // Programming alignment error -#define FLASH_WRPERR (1 << 4) // Write protection error -#define FLASH_OPERR (1 << 1) // Operation error +#define FLASH_PGSERR (1 << 7) /* Programming sequence error */ +#define FLASH_PGPERR (1 << 6) /* Programming parallelism error */ +#define FLASH_PGAERR (1 << 5) /* Programming alignment error */ +#define FLASH_WRPERR (1 << 4) /* Write protection error */ +#define FLASH_OPERR (1 << 1) /* Operation error */ -#define FLASH_ERROR (FLASH_PGSERR | FLASH_PGPERR | FLASH_PGAERR| FLASH_WRPERR| FLASH_OPERR) +#define FLASH_ERROR (FLASH_PGSERR | FLASH_PGPERR | FLASH_PGAERR | FLASH_WRPERR | FLASH_OPERR) /* STM32_FLASH_OBR bit definitions (reading) */ @@ -150,8 +149,7 @@ #define KEY1 0x45670123 #define KEY2 0xCDEF89AB -struct stm32x_flash_bank -{ +struct stm32x_flash_bank { struct working_area *write_algorithm; int probed; }; @@ -164,9 +162,7 @@ FLASH_BANK_COMMAND_HANDLER(stm32x_flash_bank_command) struct stm32x_flash_bank *stm32x_info; if (CMD_ARGC < 6) - { return ERROR_COMMAND_SYNTAX_ERROR; - } stm32x_info = malloc(sizeof(struct stm32x_flash_bank)); bank->driver_priv = stm32x_info; @@ -195,16 +191,14 @@ static int stm32x_wait_status_busy(struct flash_bank *bank, int timeout) int retval = ERROR_OK; /* wait for busy to clear */ - for (;;) - { + for (;;) { retval = stm32x_get_flash_status(bank, &status); if (retval != ERROR_OK) return retval; LOG_DEBUG("status: 0x%" PRIx32 "", status); if ((status & FLASH_BSY) == 0) break; - if (timeout-- <= 0) - { + if (timeout-- <= 0) { LOG_ERROR("timed out waiting for flash"); return ERROR_FAIL; } @@ -212,15 +206,13 @@ static int stm32x_wait_status_busy(struct flash_bank *bank, int timeout) } - if (status & FLASH_WRPERR) - { + if (status & FLASH_WRPERR) { LOG_ERROR("stm32x device protected"); retval = ERROR_FAIL; } /* Clear but report errors */ - if (status & FLASH_ERROR) - { + if (status & FLASH_ERROR) { /* If this operation fails, we ignore it and report the original * retval */ @@ -275,8 +267,7 @@ static int stm32x_erase(struct flash_bank *bank, int first, int last) struct target *target = bank->target; int i; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -297,8 +288,7 @@ static int stm32x_erase(struct flash_bank *bank, int first, int last) 4. Wait for the BSY bit to be cleared */ - for (i = first; i <= last; i++) - { + for (i = first; i <= last; i++) { retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_SER | FLASH_SNB(i) | FLASH_STRT); if (retval != ERROR_OK) @@ -361,30 +351,27 @@ static int stm32x_write_block(struct flash_bank *bank, uint8_t *buffer, /* Flip endian */ uint8_t stm32x_flash_write_code[sizeof(stm32x_flash_write_code_16)*2]; - for (unsigned i = 0; i < sizeof(stm32x_flash_write_code_16) / 2; i++) - { + for (unsigned i = 0; i < sizeof(stm32x_flash_write_code_16) / 2; i++) { stm32x_flash_write_code[i*2 + 0] = stm32x_flash_write_code_16[i] & 0xff; stm32x_flash_write_code[i*2 + 1] = (stm32x_flash_write_code_16[i] >> 8) & 0xff; } if (target_alloc_working_area(target, sizeof(stm32x_flash_write_code), - &stm32x_info->write_algorithm) != ERROR_OK) - { + &stm32x_info->write_algorithm) != ERROR_OK) { LOG_WARNING("no working area available, can't do block memory writes"); return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; }; - if ((retval = target_write_buffer(target, stm32x_info->write_algorithm->address, + retval = target_write_buffer(target, stm32x_info->write_algorithm->address, sizeof(stm32x_flash_write_code), - (uint8_t*)stm32x_flash_write_code)) != ERROR_OK) + (uint8_t *)stm32x_flash_write_code); + if (retval != ERROR_OK) return retval; /* memory buffer */ - while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) - { + while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) { buffer_size /= 2; - if (buffer_size <= 256) - { + if (buffer_size <= 256) { /* if we already allocated the writing code, but failed to get a * buffer, free the algorithm */ if (stm32x_info->write_algorithm) @@ -404,28 +391,27 @@ static int stm32x_write_block(struct flash_bank *bank, uint8_t *buffer, init_reg_param(®_params[3], "r3", 32, PARAM_IN_OUT); init_reg_param(®_params[4], "r4", 32, PARAM_OUT); - while (count > 0) - { + while (count > 0) { uint32_t thisrun_count = (count > (buffer_size / 2)) ? (buffer_size / 2) : count; - if ((retval = target_write_buffer(target, source->address, - thisrun_count * 2, buffer)) != ERROR_OK) + retval = target_write_buffer(target, source->address, thisrun_count * 2, buffer); + if (retval != ERROR_OK) break; buf_set_u32(reg_params[0].value, 0, 32, source->address); buf_set_u32(reg_params[1].value, 0, 32, address); buf_set_u32(reg_params[2].value, 0, 32, thisrun_count); - // R3 is a return value only + /* R3 is a return value only */ buf_set_u32(reg_params[4].value, 0, 32, STM32_FLASH_BASE); - if ((retval = target_run_algorithm(target, 0, NULL, + retval = target_run_algorithm(target, 0, NULL, sizeof(reg_params) / sizeof(*reg_params), reg_params, stm32x_info->write_algorithm->address, 0, - 10000, &armv7m_info)) != ERROR_OK) - { + 10000, &armv7m_info); + if (retval != ERROR_OK) { LOG_ERROR("error executing stm32x flash write algorithm"); break; } @@ -433,12 +419,9 @@ static int stm32x_write_block(struct flash_bank *bank, uint8_t *buffer, uint32_t error = buf_get_u32(reg_params[3].value, 0, 32) & FLASH_ERROR; if (error & FLASH_WRPERR) - { LOG_ERROR("flash memory write protected"); - } - if (error != 0) - { + if (error != 0) { LOG_ERROR("flash write failed = %08x", error); /* Clear but report errors */ target_write_u32(target, STM32_FLASH_SR, error); @@ -473,14 +456,12 @@ static int stm32x_write(struct flash_bank *bank, uint8_t *buffer, uint32_t bytes_written = 0; int retval; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - if (offset & 0x1) - { + if (offset & 0x1) { LOG_WARNING("offset 0x%" PRIx32 " breaks required 2-byte alignment", offset); return ERROR_FLASH_DST_BREAKS_ALIGNMENT; } @@ -490,20 +471,16 @@ static int stm32x_write(struct flash_bank *bank, uint8_t *buffer, return retval; /* multiple half words (2-byte) to be programmed? */ - if (words_remaining > 0) - { + if (words_remaining > 0) { /* try using a block write */ - if ((retval = stm32x_write_block(bank, buffer, offset, words_remaining)) != ERROR_OK) - { - if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) - { + retval = stm32x_write_block(bank, buffer, offset, words_remaining); + if (retval != ERROR_OK) { + if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) { /* if block write failed (no sufficient working area), * we use normal (slow) single dword accesses */ LOG_WARNING("couldn't use block writes, falling back to single memory accesses"); } - } - else - { + } else { buffer += words_remaining * 2; address += words_remaining * 2; words_remaining = 0; @@ -529,8 +506,7 @@ static int stm32x_write(struct flash_bank *bank, uint8_t *buffer, Double word access in case of x64 parallelism Wait for the BSY bit to be cleared */ - while (words_remaining > 0) - { + while (words_remaining > 0) { uint16_t value; memcpy(&value, buffer + bytes_written, sizeof(uint16_t)); @@ -552,8 +528,7 @@ static int stm32x_write(struct flash_bank *bank, uint8_t *buffer, address += 2; } - if (bytes_remaining) - { + if (bytes_remaining) { retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_PG | FLASH_PSIZE_8); if (retval != ERROR_OK) @@ -572,8 +547,7 @@ static int stm32x_write(struct flash_bank *bank, uint8_t *buffer, static void setup_sector(struct flash_bank *bank, int start, int num, int size) { - for (int i = start; i < (start + num) ; i++) - { + for (int i = start; i < (start + num) ; i++) { bank->sectors[i].offset = bank->size; bank->sectors[i].size = size; bank->size += bank->sectors[i].size; diff --git a/src/flash/nor/stm32lx.c b/src/flash/nor/stm32lx.c index 8ba2b83d..58a2a80b 100644 --- a/src/flash/nor/stm32lx.c +++ b/src/flash/nor/stm32lx.c @@ -23,6 +23,7 @@ * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ + #ifdef HAVE_CONFIG_H #include "config.h" #endif @@ -117,8 +118,7 @@ static int stm32lx_enable_write_half_page(struct flash_bank *bank); static int stm32lx_erase_sector(struct flash_bank *bank, int sector); static int stm32lx_wait_until_bsy_clear(struct flash_bank *bank); -struct stm32lx_flash_bank -{ +struct stm32lx_flash_bank { struct working_area *write_algorithm; int probed; }; @@ -129,16 +129,13 @@ FLASH_BANK_COMMAND_HANDLER(stm32lx_flash_bank_command) { struct stm32lx_flash_bank *stm32lx_info; if (CMD_ARGC < 6) - { return ERROR_COMMAND_SYNTAX_ERROR; - } - // Create the bank structure + /* Create the bank structure */ stm32lx_info = malloc(sizeof(struct stm32lx_flash_bank)); - // Check allocation - if (stm32lx_info == NULL) - { + /* Check allocation */ + if (stm32lx_info == NULL) { LOG_ERROR("failed to allocate bank structure"); return ERROR_FAIL; } @@ -158,8 +155,7 @@ static int stm32lx_protect_check(struct flash_bank *bank) uint32_t wrpr; - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -172,16 +168,11 @@ static int stm32lx_protect_check(struct flash_bank *bank) if (retval != ERROR_OK) return retval; - for (int i = 0; i < 32; i++) - { + for (int i = 0; i < 32; i++) { if (wrpr & (1 << i)) - { bank->sectors[i].is_protected = 1; - } else - { bank->sectors[i].is_protected = 0; - } } return ERROR_OK; } @@ -195,8 +186,7 @@ static int stm32lx_erase(struct flash_bank *bank, int first, int last) * erased, but it is not implemented yet. */ - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -204,8 +194,7 @@ static int stm32lx_erase(struct flash_bank *bank, int first, int last) /* * Loop over the selected sectors and erase them */ - for (int i = first; i <= last; i++) - { + for (int i = first; i <= last; i++) { retval = stm32lx_erase_sector(bank, i); if (retval != ERROR_OK) return retval; @@ -238,72 +227,66 @@ static int stm32lx_write_half_pages(struct flash_bank *bank, uint8_t *buffer, /* see contib/loaders/flash/stm32lx.s for src */ - static const uint16_t stm32lx_flash_write_code_16[] = - { - // 00000000 : - 0x2300, // 0: 2300 movs r3, #0 - 0xe004, // 2: e004 b.n e + static const uint16_t stm32lx_flash_write_code_16[] = { + /* 00000000 : */ + 0x2300, /* 0: 2300 movs r3, #0 */ + 0xe004, /* 2: e004 b.n e */ - // 00000004 : - 0xf851, 0xcb04, // 4: f851 cb04 ldr.w ip, [r1], #4 - 0xf840, 0xcb04, // 8: f840 cb04 str.w ip, [r0], #4 - 0x3301, // c: 3301 adds r3, #1 + /* 00000004 : */ + 0xf851, 0xcb04, /* 4: f851 cb04 ldr.w ip, [r1], #4 */ + 0xf840, 0xcb04, /* 8: f840 cb04 str.w ip, [r0], #4 */ + 0x3301, /* c: 3301 adds r3, #1 */ - // 0000000e : - 0x4293, // e: 4293 cmp r3, r2 - 0xd3f8, // 10: d3f8 bcc.n 4 - 0xbe00, // 12: be00 bkpt 0x0000 + /* 0000000e : */ + 0x4293, /* e: 4293 cmp r3, r2 */ + 0xd3f8, /* 10: d3f8 bcc.n 4 */ + 0xbe00, /* 12: be00 bkpt 0x0000 */ }; - // Flip endian + /* Flip endian */ uint8_t stm32lx_flash_write_code[sizeof(stm32lx_flash_write_code_16)]; - for (unsigned int i = 0; i < sizeof(stm32lx_flash_write_code_16) / 2; i++) - { + for (unsigned int i = 0; i < sizeof(stm32lx_flash_write_code_16) / 2; i++) { stm32lx_flash_write_code[i * 2 + 0] = stm32lx_flash_write_code_16[i] & 0xff; stm32lx_flash_write_code[i * 2 + 1] = (stm32lx_flash_write_code_16[i] >> 8) & 0xff; } - // Check if there is an even number of half pages (128bytes) - if (count % 128) - { + /* Check if there is an even number of half pages (128bytes) */ + if (count % 128) { LOG_ERROR("there should be an even number " "of half pages = 128 bytes (count = %" PRIi32 " bytes)", count); return ERROR_FAIL; } - // Allocate working area + /* Allocate working area */ reg32 = sizeof(stm32lx_flash_write_code); - // Add bytes to make 4byte aligned + /* Add bytes to make 4byte aligned */ reg32 += (4 - (reg32 % 4)) % 4; retval = target_alloc_working_area(target, reg32, &stm32lx_info->write_algorithm); if (retval != ERROR_OK) return retval; - // Write the flashing code + /* Write the flashing code */ retval = target_write_buffer(target, stm32lx_info->write_algorithm->address, sizeof(stm32lx_flash_write_code), - (uint8_t*) stm32lx_flash_write_code); - if (retval != ERROR_OK) - { + (uint8_t *)stm32lx_flash_write_code); + if (retval != ERROR_OK) { target_free_working_area(target, stm32lx_info->write_algorithm); return retval; } - // Allocate half pages memory + /* Allocate half pages memory */ while (target_alloc_working_area_try(target, buffer_size, &source) - != ERROR_OK) - { + != ERROR_OK) { if (buffer_size > 1024) buffer_size -= 1024; else buffer_size /= 2; - if (buffer_size <= 256) - { + if (buffer_size <= 256) { /* if we already allocated the writing code, but failed to get a * buffer, free the algorithm */ if (stm32lx_info->write_algorithm) @@ -323,11 +306,9 @@ static int stm32lx_write_half_pages(struct flash_bank *bank, uint8_t *buffer, init_reg_param(®_params[3], "r3", 32, PARAM_IN_OUT); init_reg_param(®_params[4], "r4", 32, PARAM_OUT); - // Enable half-page write + /* Enable half-page write */ retval = stm32lx_enable_write_half_page(bank); - if (retval != ERROR_OK) - { - + if (retval != ERROR_OK) { target_free_working_area(target, source); target_free_working_area(target, stm32lx_info->write_algorithm); @@ -335,38 +316,36 @@ static int stm32lx_write_half_pages(struct flash_bank *bank, uint8_t *buffer, destroy_reg_param(®_params[1]); destroy_reg_param(®_params[2]); destroy_reg_param(®_params[3]); - return retval; } - // Loop while there are bytes to write - while (count > 0) - { + /* Loop while there are bytes to write */ + while (count > 0) { uint32_t this_count; this_count = (count > buffer_size) ? buffer_size : count; - // Write the next half pages + /* Write the next half pages */ retval = target_write_buffer(target, source->address, this_count, buffer); if (retval != ERROR_OK) break; - // 4: Store useful information in the registers - // the destination address of the copy (R0) + /* 4: Store useful information in the registers */ + /* the destination address of the copy (R0) */ buf_set_u32(reg_params[0].value, 0, 32, address); - // The source address of the copy (R1) + /* The source address of the copy (R1) */ buf_set_u32(reg_params[1].value, 0, 32, source->address); - // The length of the copy (R2) + /* The length of the copy (R2) */ buf_set_u32(reg_params[2].value, 0, 32, this_count / 4); - // 5: Execute the bunch of code + /* 5: Execute the bunch of code */ retval = target_run_algorithm(target, 0, NULL, sizeof(reg_params) / sizeof(*reg_params), reg_params, stm32lx_info->write_algorithm->address, 0, 20000, &armv7m_info); if (retval != ERROR_OK) break; - // 6: Wait while busy + /* 6: Wait while busy */ retval = stm32lx_wait_until_bsy_clear(bank); if (retval != ERROR_OK) break; @@ -401,34 +380,28 @@ static int stm32lx_write(struct flash_bank *bank, uint8_t *buffer, uint32_t bytes_written = 0; int retval; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - if (offset & 0x1) - { + if (offset & 0x1) { LOG_ERROR("offset 0x%" PRIx32 " breaks required 2-byte alignment", offset); return ERROR_FLASH_DST_BREAKS_ALIGNMENT; } - // Check if there are some full half pages - if (((offset % 128) == 0) && (count >= 128)) - { + /* Check if there are some full half pages */ + if (((offset % 128) == 0) && (count >= 128)) { halfpages_number = count / 128; words_remaining = (count - 128 * halfpages_number) / 4; bytes_remaining = (count & 0x3); - } - else - { + } else { halfpages_number = 0; words_remaining = (count / 4); bytes_remaining = (count & 0x3); } - if (halfpages_number) - { + if (halfpages_number) { retval = stm32lx_write_half_pages(bank, buffer, offset, 128 * halfpages_number); if (retval != ERROR_OK) @@ -441,12 +414,11 @@ static int stm32lx_write(struct flash_bank *bank, uint8_t *buffer, if (retval != ERROR_OK) return retval; - while (words_remaining > 0) - { + while (words_remaining > 0) { uint32_t value; - uint8_t* p = buffer + bytes_written; + uint8_t *p = buffer + bytes_written; - // Prepare the word, Little endian conversion + /* Prepare the word, Little endian conversion */ value = p[0] + (p[1] << 8) + (p[2] << 16) + (p[3] << 24); retval = target_write_u32(target, address, value); @@ -462,8 +434,7 @@ static int stm32lx_write(struct flash_bank *bank, uint8_t *buffer, return retval; } - if (bytes_remaining) - { + if (bytes_remaining) { uint8_t last_word[4] = {0xff, 0xff, 0xff, 0xff}; /* copy the last remaining bytes into the write buffer */ @@ -508,14 +479,13 @@ static int stm32lx_probe(struct flash_bank *bank) return ERROR_FAIL; } - // Read the RDP byte and check if it is 0xAA + /* Read the RDP byte and check if it is 0xAA */ uint8_t rdp; retval = target_read_u32(target, FLASH_OBR, ®32); if (retval != ERROR_OK) return retval; rdp = reg32 & 0xFF; - if (rdp != 0xAA) - { + if (rdp != 0xAA) { /* * Unlocking the option byte is done by unlocking the PECR, then * by writing the 2 option byte keys to OPTKEYR @@ -549,19 +519,18 @@ static int stm32lx_probe(struct flash_bank *bank) if (retval != ERROR_OK) return retval; - if (reg32 & FLASH_PECR__OPTLOCK) - { + if (reg32 & FLASH_PECR__OPTLOCK) { LOG_ERROR("OPTLOCK is not cleared"); return ERROR_FLASH_OPERATION_FAILED; } - // Then, write RDP to 0x00 to set level 1 + /* Then, write RDP to 0x00 to set level 1 */ reg32 = ((~0xAA) << 16) | (0xAA); retval = target_write_u32(target, OB_RDP, reg32); if (retval != ERROR_OK) return retval; - // Set Automatic update of the option byte, by setting OBL_LAUNCH in FLASH_PECR + /* Set Automatic update of the option byte, by setting OBL_LAUNCH in FLASH_PECR */ reg32 = FLASH_PECR__OBL_LAUNCH; retval = target_write_u32(target, FLASH_PECR, reg32); if (retval != ERROR_OK) @@ -574,8 +543,7 @@ static int stm32lx_probe(struct flash_bank *bank) return retval; /* check for valid flash size */ - if (flash_size == 0xffff) - { + if (flash_size == 0xffff) { /* number of sectors incorrect on revA */ LOG_ERROR("STM32 flash size failed, probe inaccurate"); return ERROR_FAIL; @@ -588,8 +556,7 @@ static int stm32lx_probe(struct flash_bank *bank) int num_sectors = (flash_size * 1024) / FLASH_SECTOR_SIZE; LOG_INFO("flash size = %dkbytes", flash_size); - if (bank->sectors) - { + if (bank->sectors) { free(bank->sectors); bank->sectors = NULL; } @@ -598,14 +565,12 @@ static int stm32lx_probe(struct flash_bank *bank) bank->size = flash_size * 1024; bank->num_sectors = num_sectors; bank->sectors = malloc(sizeof(struct flash_sector) * num_sectors); - if (bank->sectors == NULL) - { + if (bank->sectors == NULL) { LOG_ERROR("failed to allocate bank sectors"); return ERROR_FAIL; } - for (i = 0; i < num_sectors; i++) - { + for (i = 0; i < num_sectors; i++) { bank->sectors[i].offset = i * FLASH_SECTOR_SIZE; bank->sectors[i].size = FLASH_SECTOR_SIZE; bank->sectors[i].is_erased = -1; @@ -622,9 +587,7 @@ static int stm32lx_auto_probe(struct flash_bank *bank) struct stm32lx_flash_bank *stm32lx_info = bank->driver_priv; if (stm32lx_info->probed) - { return ERROR_OK; - } return stm32lx_probe(bank); } @@ -637,60 +600,51 @@ static int stm32lx_erase_check(struct flash_bank *bank) uint32_t nBytes; int retval = ERROR_OK; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } uint8_t *buffer = malloc(buffer_size); - if (buffer == NULL) - { + if (buffer == NULL) { LOG_ERROR("failed to allocate read buffer"); return ERROR_FAIL; } - for (i = 0; i < bank->num_sectors; i++) - { + for (i = 0; i < bank->num_sectors; i++) { uint32_t j; bank->sectors[i].is_erased = 1; - // Loop chunk by chunk over the sector - for (j = 0; j < bank->sectors[i].size; j += buffer_size) - { + /* Loop chunk by chunk over the sector */ + for (j = 0; j < bank->sectors[i].size; j += buffer_size) { uint32_t chunk; chunk = buffer_size; if (chunk > (j - bank->sectors[i].size)) - { chunk = (j - bank->sectors[i].size); - } retval = target_read_memory(target, bank->base + bank->sectors[i].offset + j, 4, chunk / 4, buffer); if (retval != ERROR_OK) break; - for (nBytes = 0; nBytes < chunk; nBytes++) - { - if (buffer[nBytes] != 0x00) - { + for (nBytes = 0; nBytes < chunk; nBytes++) { + if (buffer[nBytes] != 0x00) { bank->sectors[i].is_erased = 0; break; } } } if (retval != ERROR_OK) - { break; - } } free(buffer); return retval; } + static int stm32lx_get_info(struct flash_bank *bank, char *buf, int buf_size) { - // This method must return a string displaying information about the bank + /* This method must return a string displaying information about the bank */ struct target *target = bank->target; uint32_t device_id; @@ -706,8 +660,7 @@ static int stm32lx_get_info(struct flash_bank *bank, char *buf, int buf_size) buf += printed; buf_size -= printed; - switch (device_id >> 16) - { + switch (device_id >> 16) { case 0x1000: snprintf(buf, buf_size, "A"); break; @@ -719,9 +672,7 @@ static int stm32lx_get_info(struct flash_bank *bank, char *buf, int buf_size) snprintf(buf, buf_size, "unknown"); break; } - } - else - { + } else { snprintf(buf, buf_size, "Cannot identify target as a stm32lx"); return ERROR_FAIL; } @@ -729,13 +680,11 @@ static int stm32lx_get_info(struct flash_bank *bank, char *buf, int buf_size) return ERROR_OK; } -static const struct command_registration stm32lx_exec_command_handlers[] = -{ +static const struct command_registration stm32lx_exec_command_handlers[] = { COMMAND_REGISTRATION_DONE }; -static const struct command_registration stm32lx_command_handlers[] = -{ +static const struct command_registration stm32lx_command_handlers[] = { { .name = "stm32lx", .mode = COMMAND_ANY, @@ -746,8 +695,7 @@ static const struct command_registration stm32lx_command_handlers[] = COMMAND_REGISTRATION_DONE }; -struct flash_driver stm32lx_flash = -{ +struct flash_driver stm32lx_flash = { .name = "stm32lx", .commands = stm32lx_command_handlers, .flash_bank_command = stm32lx_flash_bank_command, @@ -762,8 +710,7 @@ struct flash_driver stm32lx_flash = .info = stm32lx_get_info, }; -// Static methods implementation - +/* Static methods implementation */ static int stm32lx_unlock_program_memory(struct flash_bank *bank) { struct target *target = bank->target; @@ -789,8 +736,7 @@ static int stm32lx_unlock_program_memory(struct flash_bank *bank) if (retval != ERROR_OK) return retval; - if (reg32 & FLASH_PECR__PELOCK) - { + if (reg32 & FLASH_PECR__PELOCK) { LOG_ERROR("PELOCK is not cleared :("); return ERROR_FLASH_OPERATION_FAILED; } @@ -807,8 +753,7 @@ static int stm32lx_unlock_program_memory(struct flash_bank *bank) if (retval != ERROR_OK) return retval; - if (reg32 & FLASH_PECR__PRGLOCK) - { + if (reg32 & FLASH_PECR__PRGLOCK) { LOG_ERROR("PRGLOCK is not cleared :("); return ERROR_FLASH_OPERATION_FAILED; } @@ -892,8 +837,7 @@ static int stm32lx_erase_sector(struct flash_bank *bank, int sector) if (retval != ERROR_OK) return retval; - for (int page = 0; page < FLASH_PAGES_PER_SECTOR; page++) - { + for (int page = 0; page < FLASH_PAGES_PER_SECTOR; page++) { reg32 = FLASH_PECR__PROG | FLASH_PECR__ERASE; retval = target_write_u32(target, FLASH_PECR, reg32); if (retval != ERROR_OK) @@ -929,32 +873,26 @@ static int stm32lx_wait_until_bsy_clear(struct flash_bank *bank) int timeout = 100; /* wait for busy to clear */ - for (;;) - { + for (;;) { retval = target_read_u32(target, FLASH_SR, &status); if (retval != ERROR_OK) return retval; if ((status & FLASH_SR__BSY) == 0) - { break; - } - if (timeout-- <= 0) - { + if (timeout-- <= 0) { LOG_ERROR("timed out waiting for flash"); return ERROR_FAIL; } alive_sleep(1); } - if (status & FLASH_SR__WRPERR) - { + if (status & FLASH_SR__WRPERR) { LOG_ERROR("access denied / write protected"); retval = ERROR_FAIL; } - if (status & FLASH_SR__PGAERR) - { + if (status & FLASH_SR__PGAERR) { LOG_ERROR("invalid program address"); retval = ERROR_FAIL; } diff --git a/src/flash/nor/stmsmi.c b/src/flash/nor/stmsmi.c index df8dbe75..bf26a8eb 100644 --- a/src/flash/nor/stmsmi.c +++ b/src/flash/nor/stmsmi.c @@ -43,33 +43,33 @@ #include #define SMI_READ_REG(a) (_SMI_READ_REG(a)) -#define _SMI_READ_REG(a) \ -{ \ - int __a; \ - uint32_t __v; \ - \ +#define _SMI_READ_REG(a) \ +{ \ + int __a; \ + uint32_t __v; \ + \ __a = target_read_u32(target, io_base + (a), &__v); \ - if (__a != ERROR_OK) \ - return __a; \ - __v; \ + if (__a != ERROR_OK) \ + return __a; \ + __v; \ } -#define SMI_WRITE_REG(a,v) \ -{ \ - int __r; \ - \ +#define SMI_WRITE_REG(a, v) \ +{ \ + int __r; \ + \ __r = target_write_u32(target, io_base + (a), (v)); \ - if (__r != ERROR_OK) \ - return __r; \ + if (__r != ERROR_OK) \ + return __r; \ } -#define SMI_POLL_TFF(timeout) \ -{ \ - int __r; \ - \ +#define SMI_POLL_TFF(timeout) \ +{ \ + int __r; \ + \ __r = poll_tff(target, io_base, timeout); \ - if (__r != ERROR_OK) \ - return __r; \ + if (__r != ERROR_OK) \ + return __r; \ } #define SMI_SET_SW_MODE() SMI_WRITE_REG(SMI_CR1, \ @@ -117,8 +117,7 @@ #define SMI_PROBE_TIMEOUT (100) #define SMI_MAX_TIMEOUT (3000) -struct stmsmi_flash_bank -{ +struct stmsmi_flash_bank { int probed; uint32_t io_base; uint32_t bank_num; @@ -202,16 +201,13 @@ FLASH_BANK_COMMAND_HANDLER(stmsmi_flash_bank_command) { struct stmsmi_flash_bank *stmsmi_info; - LOG_DEBUG("%s", __FUNCTION__); + LOG_DEBUG("%s", __func__); if (CMD_ARGC < 6) - { - return ERROR_COMMAND_SYNTAX_ERROR; - } + return ERROR_COMMAND_SYNTAX_ERROR; stmsmi_info = malloc(sizeof(struct stmsmi_flash_bank)); - if (stmsmi_info == NULL) - { + if (stmsmi_info == NULL) { LOG_ERROR("not enough memory"); return ERROR_FAIL; } @@ -279,17 +275,17 @@ static int wait_till_ready(struct flash_bank *bank, int timeout) int retval; long long endtime; - endtime = timeval_ms() + timeout; - do { - /* read flash status register */ - retval = read_status_reg(bank, &status); - if (retval != ERROR_OK) - return retval; + endtime = timeval_ms() + timeout; + do { + /* read flash status register */ + retval = read_status_reg(bank, &status); + if (retval != ERROR_OK) + return retval; if ((status & SMI_WIP_BIT) == 0) return ERROR_OK; alive_sleep(1); - } while (timeval_ms() < endtime); + } while (timeval_ms() < endtime); LOG_ERROR("timeout"); return ERROR_FAIL; @@ -324,8 +320,7 @@ static int smi_write_enable(struct flash_bank *bank) return retval; /* Check write enabled */ - if ((status & SMI_WEL_BIT) == 0) - { + if ((status & SMI_WEL_BIT) == 0) { LOG_ERROR("Cannot enable write to flash. Status=0x%08" PRIx32, status); return ERROR_FAIL; } @@ -391,37 +386,31 @@ static int stmsmi_erase(struct flash_bank *bank, int first, int last) int retval = ERROR_OK; int sector; - LOG_DEBUG("%s: from sector %d to sector %d", __FUNCTION__, first, last); + LOG_DEBUG("%s: from sector %d to sector %d", __func__, first, last); - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - if ((first < 0) || (last < first) || (last >= bank->num_sectors)) - { + if ((first < 0) || (last < first) || (last >= bank->num_sectors)) { LOG_ERROR("Flash sector invalid"); return ERROR_FLASH_SECTOR_INVALID; } - if (!(stmsmi_info->probed)) - { + if (!(stmsmi_info->probed)) { LOG_ERROR("Flash bank not probed"); return ERROR_FLASH_BANK_NOT_PROBED; } - for (sector = first; sector <= last; sector++) - { - if (bank->sectors[sector].is_protected) - { + for (sector = first; sector <= last; sector++) { + if (bank->sectors[sector].is_protected) { LOG_ERROR("Flash sector %d protected", sector); return ERROR_FAIL; } } - for (sector = first; sector <= last; sector++) - { + for (sector = first; sector <= last; sector++) { retval = smi_erase_sector(bank, sector); if (retval != ERROR_OK) break; @@ -452,7 +441,7 @@ static int smi_write_buffer(struct flash_bank *bank, uint8_t *buffer, int retval; LOG_DEBUG("%s: address=0x%08" PRIx32 " len=0x%08" PRIx32, - __FUNCTION__, address, len); + __func__, address, len); retval = smi_write_enable(bank); if (retval != ERROR_OK) @@ -479,30 +468,26 @@ static int stmsmi_write(struct flash_bank *bank, uint8_t *buffer, int retval = ERROR_OK; LOG_DEBUG("%s: offset=0x%08" PRIx32 " count=0x%08" PRIx32, - __FUNCTION__, offset, count); + __func__, offset, count); - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - if (offset + count > stmsmi_info->dev->size_in_bytes) - { + if (offset + count > stmsmi_info->dev->size_in_bytes) { LOG_WARNING("Write pasts end of flash. Extra data discarded."); count = stmsmi_info->dev->size_in_bytes - offset; } /* Check sector protection */ - for (sector = 0; sector < bank->num_sectors; sector++) - { + for (sector = 0; sector < bank->num_sectors; sector++) { /* Start offset in or before this sector? */ /* End offset in or behind this sector? */ - if ( (offset < + if ((offset < (bank->sectors[sector].offset + bank->sectors[sector].size)) && ((offset + count - 1) >= bank->sectors[sector].offset) - && bank->sectors[sector].is_protected ) - { + && bank->sectors[sector].is_protected) { LOG_ERROR("Flash sector %d protected", sector); return ERROR_FAIL; } @@ -511,8 +496,7 @@ static int stmsmi_write(struct flash_bank *bank, uint8_t *buffer, page_size = stmsmi_info->dev->pagesize; /* unaligned buffer head */ - if (count > 0 && (offset & 3) != 0) - { + if (count > 0 && (offset & 3) != 0) { cur_count = 4 - (offset & 3); if (cur_count > count) cur_count = count; @@ -527,8 +511,7 @@ static int stmsmi_write(struct flash_bank *bank, uint8_t *buffer, page_offset = offset % page_size; /* central part, aligned words */ - while (count >= 4) - { + while (count >= 4) { /* clip block at page boundary */ if (page_offset + count > page_size) cur_count = page_size - page_offset; @@ -567,8 +550,7 @@ static int read_flash_id(struct flash_bank *bank, uint32_t *id) uint32_t io_base = stmsmi_info->io_base; int retval; - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -614,18 +596,16 @@ static int stmsmi_probe(struct flash_bank *bank) free(bank->sectors); stmsmi_info->probed = 0; - for (target_device=target_devices ; target_device->name ; ++target_device) + for (target_device = target_devices ; target_device->name ; ++target_device) if (target_device->tap_idcode == target->tap->idcode) break; - if (!target_device->name) - { + if (!target_device->name) { LOG_ERROR("Device ID 0x%" PRIx32 " is not known as SMI capable", target->tap->idcode); return ERROR_FAIL; } - switch (bank->base - target_device->smi_base) - { + switch (bank->base - target_device->smi_base) { case 0: stmsmi_info->bank_num = SMI_SEL_BANK0; break; @@ -661,8 +641,7 @@ static int stmsmi_probe(struct flash_bank *bank) break; } - if (!stmsmi_info->dev) - { + if (!stmsmi_info->dev) { LOG_ERROR("Unknown flash device (ID 0x%08" PRIx32 ")", id); return ERROR_FAIL; } @@ -677,14 +656,12 @@ static int stmsmi_probe(struct flash_bank *bank) bank->num_sectors = stmsmi_info->dev->size_in_bytes / stmsmi_info->dev->sectorsize; sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors); - if (sectors == NULL) - { + if (sectors == NULL) { LOG_ERROR("not enough memory"); return ERROR_FAIL; } - for (int sector = 0; sector < bank->num_sectors; sector++) - { + for (int sector = 0; sector < bank->num_sectors; sector++) { sectors[sector].offset = sector * stmsmi_info->dev->sectorsize; sectors[sector].size = stmsmi_info->dev->sectorsize; sectors[sector].is_erased = -1; @@ -714,8 +691,7 @@ static int get_stmsmi_info(struct flash_bank *bank, char *buf, int buf_size) { struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv; - if (!(stmsmi_info->probed)) - { + if (!(stmsmi_info->probed)) { snprintf(buf, buf_size, "\nSMI flash bank not probed yet\n"); return ERROR_OK; diff --git a/src/flash/nor/str7x.c b/src/flash/nor/str7x.c index 86db9ab4..6cd5d69f 100644 --- a/src/flash/nor/str7x.c +++ b/src/flash/nor/str7x.c @@ -23,6 +23,7 @@ * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ + #ifdef HAVE_CONFIG_H #include "config.h" #endif @@ -32,7 +33,6 @@ #include #include - /* Flash registers */ #define FLASH_CR0 0x00000000 @@ -85,8 +85,7 @@ #define FLASH_ERR 0x00000001 -struct str7x_flash_bank -{ +struct str7x_flash_bank { uint32_t *sector_bits; uint32_t disable_bit; uint32_t busy_bits; @@ -100,8 +99,7 @@ struct str7x_mem_layout { uint32_t sector_bit; }; -enum str7x_status_codes -{ +enum str7x_status_codes { STR7X_CMD_SUCCESS = 0, STR7X_INVALID_COMMAND = 1, STR7X_SRC_ADDR_ERROR = 2, @@ -135,7 +133,7 @@ static struct str7x_mem_layout mem_layout_str7bank1[] = { static int str7x_get_flash_adr(struct flash_bank *bank, uint32_t reg) { struct str7x_flash_bank *str7x_info = bank->driver_priv; - return (str7x_info->register_base | reg); + return str7x_info->register_base | reg; } static int str7x_build_block_list(struct flash_bank *bank) @@ -146,8 +144,7 @@ static int str7x_build_block_list(struct flash_bank *bank) int num_sectors; int b0_sectors = 0, b1_sectors = 0; - switch (bank->size) - { + switch (bank->size) { case 16 * 1024: b1_sectors = 2; break; @@ -173,8 +170,7 @@ static int str7x_build_block_list(struct flash_bank *bank) num_sectors = 0; - for (i = 0; i < b0_sectors; i++) - { + for (i = 0; i < b0_sectors; i++) { bank->sectors[num_sectors].offset = mem_layout_str7bank0[i].sector_start; bank->sectors[num_sectors].size = mem_layout_str7bank0[i].sector_size; bank->sectors[num_sectors].is_erased = -1; @@ -185,8 +181,7 @@ static int str7x_build_block_list(struct flash_bank *bank) str7x_info->sector_bits[num_sectors++] = mem_layout_str7bank0[i].sector_bit; } - for (i = 0; i < b1_sectors; i++) - { + for (i = 0; i < b1_sectors; i++) { bank->sectors[num_sectors].offset = mem_layout_str7bank1[i].sector_start; bank->sectors[num_sectors].size = mem_layout_str7bank1[i].sector_size; bank->sectors[num_sectors].is_erased = -1; @@ -207,9 +202,7 @@ FLASH_BANK_COMMAND_HANDLER(str7x_flash_bank_command) struct str7x_flash_bank *str7x_info; if (CMD_ARGC < 7) - { return ERROR_COMMAND_SYNTAX_ERROR; - } str7x_info = malloc(sizeof(struct str7x_flash_bank)); bank->driver_priv = str7x_info; @@ -219,21 +212,14 @@ FLASH_BANK_COMMAND_HANDLER(str7x_flash_bank_command) str7x_info->disable_bit = (1 << 1); if (strcmp(CMD_ARGV[6], "STR71x") == 0) - { str7x_info->register_base = 0x40100000; - } - else if (strcmp(CMD_ARGV[6], "STR73x") == 0) - { + else if (strcmp(CMD_ARGV[6], "STR73x") == 0) { str7x_info->register_base = 0x80100000; str7x_info->busy_bits = (FLASH_LOCK | FLASH_BSYA0); - } - else if (strcmp(CMD_ARGV[6], "STR75x") == 0) - { + } else if (strcmp(CMD_ARGV[6], "STR75x") == 0) { str7x_info->register_base = 0x20100000; str7x_info->disable_bit = (1 << 0); - } - else - { + } else { LOG_ERROR("unknown STR7x variant: '%s'", CMD_ARGV[6]); free(str7x_info); return ERROR_FLASH_BANK_INVALID; @@ -263,8 +249,7 @@ static int str7x_waitbusy(struct flash_bank *bank) struct target *target = bank->target; struct str7x_flash_bank *str7x_info = bank->driver_priv; - for (i = 0 ; i < 10000; i++) - { + for (i = 0 ; i < 10000; i++) { uint32_t retval; err = target_read_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), &retval); if (err != ERROR_OK) @@ -290,35 +275,28 @@ static int str7x_result(struct flash_bank *bank) if (retval != ERROR_OK) return retval; - if (flash_flags & FLASH_WPF) - { + if (flash_flags & FLASH_WPF) { LOG_ERROR("str7x hw write protection set"); retval = ERROR_FAIL; } - if (flash_flags & FLASH_RESER) - { + if (flash_flags & FLASH_RESER) { LOG_ERROR("str7x suspended program erase not resumed"); retval = ERROR_FAIL; } - if (flash_flags & FLASH_10ER) - { + if (flash_flags & FLASH_10ER) { LOG_ERROR("str7x trying to set bit to 1 when it is already 0"); retval = ERROR_FAIL; } - if (flash_flags & FLASH_PGER) - { + if (flash_flags & FLASH_PGER) { LOG_ERROR("str7x program error"); retval = ERROR_FAIL; } - if (flash_flags & FLASH_ERER) - { + if (flash_flags & FLASH_ERER) { LOG_ERROR("str7x erase error"); retval = ERROR_FAIL; } - if (retval == ERROR_OK) - { - if (flash_flags & FLASH_ERR) - { + if (retval == ERROR_OK) { + if (flash_flags & FLASH_ERR) { /* this should always be set if one of the others are set... */ LOG_ERROR("str7x write operation failed / bad setup"); retval = ERROR_FAIL; @@ -336,8 +314,7 @@ static int str7x_protect_check(struct flash_bank *bank) int i; uint32_t flash_flags; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -347,8 +324,7 @@ static int str7x_protect_check(struct flash_bank *bank) if (retval != ERROR_OK) return retval; - for (i = 0; i < bank->num_sectors; i++) - { + for (i = 0; i < bank->num_sectors; i++) { if (flash_flags & str7x_info->sector_bits[i]) bank->sectors[i].is_protected = 0; else @@ -368,16 +344,13 @@ static int str7x_erase(struct flash_bank *bank, int first, int last) uint32_t sectors = 0; int err; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } for (i = first; i <= last; i++) - { sectors |= str7x_info->sector_bits[i]; - } LOG_DEBUG("sectors: 0x%" PRIx32 "", sectors); @@ -423,16 +396,14 @@ static int str7x_protect(struct flash_bank *bank, int set, int first, int last) uint32_t cmd; uint32_t protect_blocks; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } protect_blocks = 0xFFFFFFFF; - if (set) - { + if (set) { for (i = first; i <= last; i++) protect_blocks &= ~(str7x_info->sector_bits[i]); } @@ -499,7 +470,7 @@ static int str7x_write_block(struct flash_bank *bank, uint8_t *buffer, 0xe582400c, /* str r4, [r2, #0xc] */ 0xe3a04209, /* mov r4, #0x90000000 */ 0xe5824000, /* str r4, [r2, #0x0] */ - /* busy: */ + /* busy: */ 0xe5924000, /* ldr r4, [r2, #0x0] */ 0xe1140005, /* tst r4, r5 */ 0x1afffffc, /* bne busy */ @@ -516,21 +487,18 @@ static int str7x_write_block(struct flash_bank *bank, uint8_t *buffer, /* flash write code */ if (target_alloc_working_area_try(target, sizeof(str7x_flash_write_code), - &str7x_info->write_algorithm) != ERROR_OK) - { + &str7x_info->write_algorithm) != ERROR_OK) { return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; }; target_write_buffer(target, str7x_info->write_algorithm->address, sizeof(str7x_flash_write_code), - (uint8_t*)str7x_flash_write_code); + (uint8_t *)str7x_flash_write_code); /* memory buffer */ - while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) - { + while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) { buffer_size /= 2; - if (buffer_size <= 256) - { + if (buffer_size <= 256) { /* if we already allocated the writing code, but failed to get a * buffer, free the algorithm */ if (str7x_info->write_algorithm) @@ -552,8 +520,7 @@ static int str7x_write_block(struct flash_bank *bank, uint8_t *buffer, init_reg_param(®_params[4], "r4", 32, PARAM_IN); init_reg_param(®_params[5], "r5", 32, PARAM_OUT); - while (count > 0) - { + while (count > 0) { uint32_t thisrun_count = (count > (buffer_size / 8)) ? (buffer_size / 8) : count; target_write_buffer(target, source->address, thisrun_count * 8, buffer); @@ -564,16 +531,14 @@ static int str7x_write_block(struct flash_bank *bank, uint8_t *buffer, buf_set_u32(reg_params[3].value, 0, 32, thisrun_count); buf_set_u32(reg_params[5].value, 0, 32, str7x_info->busy_bits); - if ((retval = target_run_algorithm(target, 0, NULL, 6, reg_params, + retval = target_run_algorithm(target, 0, NULL, 6, reg_params, str7x_info->write_algorithm->address, str7x_info->write_algorithm->address + (sizeof(str7x_flash_write_code) - 4), - 10000, &armv4_5_info)) != ERROR_OK) - { + 10000, &armv4_5_info); + if (retval != ERROR_OK) break; - } - if (buf_get_u32(reg_params[4].value, 0, 32) != 0x00) - { + if (buf_get_u32(reg_params[4].value, 0, 32) != 0x00) { retval = str7x_result(bank); break; } @@ -609,26 +574,22 @@ static int str7x_write(struct flash_bank *bank, uint8_t *buffer, uint32_t check_address = offset; int i; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - if (offset & 0x7) - { + if (offset & 0x7) { LOG_WARNING("offset 0x%" PRIx32 " breaks required 8-byte alignment", offset); return ERROR_FLASH_DST_BREAKS_ALIGNMENT; } - for (i = 0; i < bank->num_sectors; i++) - { + for (i = 0; i < bank->num_sectors; i++) { uint32_t sec_start = bank->sectors[i].offset; uint32_t sec_end = sec_start + bank->sectors[i].size; /* check if destination falls within the current sector */ - if ((check_address >= sec_start) && (check_address < sec_end)) - { + if ((check_address >= sec_start) && (check_address < sec_end)) { /* check if destination ends in the current sector */ if (offset + count < sec_end) check_address = offset + count; @@ -644,32 +605,25 @@ static int str7x_write(struct flash_bank *bank, uint8_t *buffer, target_write_u32(target, str7x_get_flash_adr(bank, FLASH_ER), 0x0); /* multiple dwords (8-byte) to be programmed? */ - if (dwords_remaining > 0) - { + if (dwords_remaining > 0) { /* try using a block write */ - if ((retval = str7x_write_block(bank, buffer, offset, - dwords_remaining)) != ERROR_OK) - { - if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) - { + retval = str7x_write_block(bank, buffer, offset, dwords_remaining); + if (retval != ERROR_OK) { + if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) { /* if block write failed (no sufficient working area), * we use normal (slow) single dword accesses */ LOG_WARNING("couldn't use block writes, falling back to single memory accesses"); - } else - { + } else { return retval; } - } - else - { + } else { buffer += dwords_remaining * 8; address += dwords_remaining * 8; dwords_remaining = 0; } } - while (dwords_remaining > 0) - { + while (dwords_remaining > 0) { /* command */ cmd = FLASH_DWPG; target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd); @@ -704,8 +658,7 @@ static int str7x_write(struct flash_bank *bank, uint8_t *buffer, address += 8; } - if (bytes_remaining) - { + if (bytes_remaining) { uint8_t last_dword[8] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; /* copy the last remaining bytes into the write buffer */ @@ -777,9 +730,7 @@ COMMAND_HANDLER(str7x_handle_disable_jtag_command) uint16_t ProtectionRegs; if (CMD_ARGC < 1) - { return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); @@ -790,8 +741,7 @@ COMMAND_HANDLER(str7x_handle_disable_jtag_command) target = bank->target; - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -801,30 +751,24 @@ COMMAND_HANDLER(str7x_handle_disable_jtag_command) target_read_u32(target, str7x_get_flash_adr(bank, FLASH_NVAPR0), ®); if (!(reg & str7x_info->disable_bit)) - { ProtectionLevel = 1; - } target_read_u32(target, str7x_get_flash_adr(bank, FLASH_NVAPR1), ®); ProtectionRegs = ~(reg >> 16); - while (((ProtectionRegs) != 0) && (ProtectionLevel < 16)) - { + while (((ProtectionRegs) != 0) && (ProtectionLevel < 16)) { ProtectionRegs >>= 1; ProtectionLevel++; } - if (ProtectionLevel == 0) - { + if (ProtectionLevel == 0) { flash_cmd = FLASH_SPR; target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), flash_cmd); target_write_u32(target, str7x_get_flash_adr(bank, FLASH_AR), 0x4010DFB8); target_write_u32(target, str7x_get_flash_adr(bank, FLASH_DR0), 0xFFFFFFFD); flash_cmd = FLASH_SPR | FLASH_WMS; target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), flash_cmd); - } - else - { + } else { flash_cmd = FLASH_SPR; target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), flash_cmd); target_write_u32(target, str7x_get_flash_adr(bank, FLASH_AR), 0x4010DFBC); diff --git a/src/flash/nor/str9x.c b/src/flash/nor/str9x.c index 1f2c9581..472f922c 100644 --- a/src/flash/nor/str9x.c +++ b/src/flash/nor/str9x.c @@ -23,6 +23,7 @@ * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ + #ifdef HAVE_CONFIG_H #include "config.h" #endif @@ -31,7 +32,6 @@ #include #include - /* Flash registers */ #define FLASH_BBSR 0x54000000 /* Boot Bank Size Register */ @@ -42,17 +42,14 @@ #define FLASH_SR 0x5400001C /* Status Register */ #define FLASH_BCE5ADDR 0x54000020 /* BC Fifth Entry Target Address Register */ - -struct str9x_flash_bank -{ +struct str9x_flash_bank { uint32_t *sector_bits; int variant; int bank1; struct working_area *write_algorithm; }; -enum str9x_status_codes -{ +enum str9x_status_codes { STR9X_CMD_SUCCESS = 0, STR9X_INVALID_COMMAND = 1, STR9X_SRC_ADDR_ERROR = 2, @@ -82,8 +79,7 @@ static int str9x_build_block_list(struct flash_bank *bank) str9x_info->variant = 0; str9x_info->bank1 = 0; - switch (bank->size) - { + switch (bank->size) { case (256 * 1024): b0_sectors = 4; break; @@ -124,8 +120,7 @@ static int str9x_build_block_list(struct flash_bank *bank) num_sectors = 0; - for (i = 0; i < b0_sectors; i++) - { + for (i = 0; i < b0_sectors; i++) { bank->sectors[num_sectors].offset = offset; bank->sectors[num_sectors].size = 0x10000; offset += bank->sectors[i].size; @@ -134,8 +129,7 @@ static int str9x_build_block_list(struct flash_bank *bank) str9x_info->sector_bits[num_sectors++] = (1 << i); } - for (i = 0; i < b1_sectors; i++) - { + for (i = 0; i < b1_sectors; i++) { bank->sectors[num_sectors].offset = offset; bank->sectors[num_sectors].size = str9x_info->variant == 0 ? 0x2000 : 0x4000; offset += bank->sectors[i].size; @@ -157,9 +151,7 @@ FLASH_BANK_COMMAND_HANDLER(str9x_flash_bank_command) struct str9x_flash_bank *str9x_info; if (CMD_ARGC < 6) - { return ERROR_COMMAND_SYNTAX_ERROR; - } str9x_info = malloc(sizeof(struct str9x_flash_bank)); bank->driver_priv = str9x_info; @@ -182,64 +174,49 @@ static int str9x_protect_check(struct flash_bank *bank) uint32_t status = 0; uint16_t hstatus = 0; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } /* read level one protection */ - if (str9x_info->variant) - { - if (str9x_info->bank1) - { + if (str9x_info->variant) { + if (str9x_info->bank1) { adr = bank1start + 0x18; - if ((retval = target_write_u16(target, adr, 0x90)) != ERROR_OK) - { + retval = target_write_u16(target, adr, 0x90); + if (retval != ERROR_OK) return retval; - } - if ((retval = target_read_u16(target, adr, &hstatus)) != ERROR_OK) - { + retval = target_read_u16(target, adr, &hstatus); + if (retval != ERROR_OK) return retval; - } status = hstatus; - } - else - { + } else { adr = bank1start + 0x14; - if ((retval = target_write_u16(target, adr, 0x90)) != ERROR_OK) - { + retval = target_write_u16(target, adr, 0x90); + if (retval != ERROR_OK) return retval; - } - if ((retval = target_read_u32(target, adr, &status)) != ERROR_OK) - { + retval = target_read_u32(target, adr, &status); + if (retval != ERROR_OK) return retval; - } } - } - else - { + } else { adr = bank1start + 0x10; - if ((retval = target_write_u16(target, adr, 0x90)) != ERROR_OK) - { + retval = target_write_u16(target, adr, 0x90); + if (retval != ERROR_OK) return retval; - } - if ((retval = target_read_u16(target, adr, &hstatus)) != ERROR_OK) - { + retval = target_read_u16(target, adr, &hstatus); + if (retval != ERROR_OK) return retval; - } status = hstatus; } /* read array command */ - if ((retval = target_write_u16(target, adr, 0xFF)) != ERROR_OK) - { + retval = target_write_u16(target, adr, 0xFF); + if (retval != ERROR_OK) return retval; - } - for (i = 0; i < bank->num_sectors; i++) - { + for (i = 0; i < bank->num_sectors; i++) { if (status & str9x_info->sector_bits[i]) bank->sectors[i].is_protected = 1; else @@ -258,22 +235,18 @@ static int str9x_erase(struct flash_bank *bank, int first, int last) uint8_t erase_cmd; int total_timeout; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } /* Check if we can erase whole bank */ - if ((first == 0) && (last == (bank->num_sectors - 1))) - { + if ((first == 0) && (last == (bank->num_sectors - 1))) { /* Optimize to run erase bank command instead of sector */ erase_cmd = 0x80; - /* Add timeout duration since erase bank takes more time */ + /* Add timeout duration since erase bank takes more time */ total_timeout = 1000 * bank->num_sectors; - } - else - { + } else { /* Erase sector command */ erase_cmd = 0x20; total_timeout = 1000; @@ -282,58 +255,48 @@ static int str9x_erase(struct flash_bank *bank, int first, int last) /* this is so the compiler can *know* */ assert(total_timeout > 0); - for (i = first; i <= last; i++) - { + for (i = first; i <= last; i++) { int retval; adr = bank->base + bank->sectors[i].offset; /* erase sectors or block */ - if ((retval = target_write_u16(target, adr, erase_cmd)) != ERROR_OK) - { + retval = target_write_u16(target, adr, erase_cmd); + if (retval != ERROR_OK) return retval; - } - if ((retval = target_write_u16(target, adr, 0xD0)) != ERROR_OK) - { + retval = target_write_u16(target, adr, 0xD0); + if (retval != ERROR_OK) return retval; - } /* get status */ - if ((retval = target_write_u16(target, adr, 0x70)) != ERROR_OK) - { + retval = target_write_u16(target, adr, 0x70); + if (retval != ERROR_OK) return retval; - } int timeout; - for (timeout = 0; timeout < total_timeout; timeout++) - { - if ((retval = target_read_u8(target, adr, &status)) != ERROR_OK) - { + for (timeout = 0; timeout < total_timeout; timeout++) { + retval = target_read_u8(target, adr, &status); + if (retval != ERROR_OK) return retval; - } if (status & 0x80) break; alive_sleep(1); } - if (timeout == total_timeout) - { + if (timeout == total_timeout) { LOG_ERROR("erase timed out"); return ERROR_FAIL; } /* clear status, also clear read array */ - if ((retval = target_write_u16(target, adr, 0x50)) != ERROR_OK) - { + retval = target_write_u16(target, adr, 0x50); + if (retval != ERROR_OK) return retval; - } /* read array command */ - if ((retval = target_write_u16(target, adr, 0xFF)) != ERROR_OK) - { + retval = target_write_u16(target, adr, 0xFF); + if (retval != ERROR_OK) return retval; - } - if (status & 0x22) - { + if (status & 0x22) { LOG_ERROR("error erasing flash bank, status: 0x%x", status); return ERROR_FLASH_OPERATION_FAILED; } @@ -357,14 +320,12 @@ static int str9x_protect(struct flash_bank *bank, uint32_t adr; uint8_t status; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - for (i = first; i <= last; i++) - { + for (i = first; i <= last; i++) { /* Level One Protection */ adr = bank->base + bank->sectors[i].offset; @@ -429,22 +390,19 @@ static int str9x_write_block(struct flash_bank *bank, /* flash write code */ if (target_alloc_working_area(target, sizeof(str9x_flash_write_code), - &str9x_info->write_algorithm) != ERROR_OK) - { + &str9x_info->write_algorithm) != ERROR_OK) { LOG_WARNING("no working area available, can't do block memory writes"); return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; }; target_write_buffer(target, str9x_info->write_algorithm->address, sizeof(str9x_flash_write_code), - (uint8_t*)str9x_flash_write_code); + (uint8_t *)str9x_flash_write_code); /* memory buffer */ - while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) - { + while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) { buffer_size /= 2; - if (buffer_size <= 256) - { + if (buffer_size <= 256) { /* if we already allocated the writing code, but failed to get a * buffer, free the algorithm */ if (str9x_info->write_algorithm) @@ -464,8 +422,7 @@ static int str9x_write_block(struct flash_bank *bank, init_reg_param(®_params[2], "r2", 32, PARAM_OUT); init_reg_param(®_params[3], "r3", 32, PARAM_IN); - while (count > 0) - { + while (count > 0) { uint32_t thisrun_count = (count > (buffer_size / 2)) ? (buffer_size / 2) : count; target_write_buffer(target, source->address, thisrun_count * 2, buffer); @@ -474,17 +431,16 @@ static int str9x_write_block(struct flash_bank *bank, buf_set_u32(reg_params[1].value, 0, 32, address); buf_set_u32(reg_params[2].value, 0, 32, thisrun_count); - if ((retval = target_run_algorithm(target, 0, NULL, 4, reg_params, + retval = target_run_algorithm(target, 0, NULL, 4, reg_params, str9x_info->write_algorithm->address, - 0, 10000, &armv4_5_info)) != ERROR_OK) - { + 0, 10000, &armv4_5_info); + if (retval != ERROR_OK) { LOG_ERROR("error executing str9x flash write algorithm"); retval = ERROR_FLASH_OPERATION_FAILED; break; } - if (buf_get_u32(reg_params[3].value, 0, 32) != 0x80) - { + if (buf_get_u32(reg_params[3].value, 0, 32) != 0x80) { retval = ERROR_FLASH_OPERATION_FAILED; break; } @@ -519,26 +475,22 @@ static int str9x_write(struct flash_bank *bank, uint32_t bank_adr; int i; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - if (offset & 0x1) - { + if (offset & 0x1) { LOG_WARNING("offset 0x%" PRIx32 " breaks required 2-byte alignment", offset); return ERROR_FLASH_DST_BREAKS_ALIGNMENT; } - for (i = 0; i < bank->num_sectors; i++) - { + for (i = 0; i < bank->num_sectors; i++) { uint32_t sec_start = bank->sectors[i].offset; uint32_t sec_end = sec_start + bank->sectors[i].size; /* check if destination falls within the current sector */ - if ((check_address >= sec_start) && (check_address < sec_end)) - { + if ((check_address >= sec_start) && (check_address < sec_end)) { /* check if destination ends in the current sector */ if (offset + count < sec_end) check_address = offset + count; @@ -551,33 +503,26 @@ static int str9x_write(struct flash_bank *bank, return ERROR_FLASH_DST_OUT_OF_BANK; /* multiple half words (2-byte) to be programmed? */ - if (words_remaining > 0) - { + if (words_remaining > 0) { /* try using a block write */ - if ((retval = str9x_write_block(bank, buffer, offset, words_remaining)) != ERROR_OK) - { - if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) - { + retval = str9x_write_block(bank, buffer, offset, words_remaining); + if (retval != ERROR_OK) { + if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) { /* if block write failed (no sufficient working area), * we use normal (slow) single dword accesses */ LOG_WARNING("couldn't use block writes, falling back to single memory accesses"); - } - else if (retval == ERROR_FLASH_OPERATION_FAILED) - { + } else if (retval == ERROR_FLASH_OPERATION_FAILED) { LOG_ERROR("flash writing failed"); return ERROR_FLASH_OPERATION_FAILED; } - } - else - { + } else { buffer += words_remaining * 2; address += words_remaining * 2; words_remaining = 0; } } - while (words_remaining > 0) - { + while (words_remaining > 0) { bank_adr = address & ~0x03; /* write data command */ @@ -588,15 +533,13 @@ static int str9x_write(struct flash_bank *bank, target_write_u16(target, bank_adr, 0x70); int timeout; - for (timeout = 0; timeout < 1000; timeout++) - { + for (timeout = 0; timeout < 1000; timeout++) { target_read_u8(target, bank_adr, &status); if (status & 0x80) break; alive_sleep(1); } - if (timeout == 1000) - { + if (timeout == 1000) { LOG_ERROR("write timed out"); return ERROR_FAIL; } @@ -615,8 +558,7 @@ static int str9x_write(struct flash_bank *bank, address += 2; } - if (bytes_remaining) - { + if (bytes_remaining) { uint8_t last_halfword[2] = {0xff, 0xff}; /* copy the last remaining bytes into the write buffer */ @@ -632,15 +574,13 @@ static int str9x_write(struct flash_bank *bank, target_write_u16(target, bank_adr, 0x70); int timeout; - for (timeout = 0; timeout < 1000; timeout++) - { + for (timeout = 0; timeout < 1000; timeout++) { target_read_u8(target, bank_adr, &status); if (status & 0x80) break; alive_sleep(1); } - if (timeout == 1000) - { + if (timeout == 1000) { LOG_ERROR("write timed out"); return ERROR_FAIL; } @@ -681,9 +621,7 @@ COMMAND_HANDLER(str9x_handle_flash_config_command) struct target *target = NULL; if (CMD_ARGC < 5) - { return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); @@ -698,8 +636,7 @@ COMMAND_HANDLER(str9x_handle_flash_config_command) target = bank->target; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } diff --git a/src/flash/nor/str9xpec.c b/src/flash/nor/str9xpec.c index b598c262..e89ecf49 100644 --- a/src/flash/nor/str9xpec.c +++ b/src/flash/nor/str9xpec.c @@ -20,6 +20,7 @@ * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ + #ifdef HAVE_CONFIG_H #include "config.h" #endif @@ -27,7 +28,6 @@ #include "imp.h" #include - /* ISC commands */ #define ISC_IDCODE 0xFE @@ -61,16 +61,14 @@ #define STR9XPEC_OPT_LVDWARNBIT 51 #define STR9XPEC_OPT_OTPBIT 63 -enum str9xpec_status_codes -{ +enum str9xpec_status_codes { STR9XPEC_INVALID_COMMAND = 1, STR9XPEC_ISC_SUCCESS = 2, STR9XPEC_ISC_DISABLED = 3, STR9XPEC_ISC_INTFAIL = 32, }; -struct str9xpec_flash_controller -{ +struct str9xpec_flash_controller { struct jtag_tap *tap; uint32_t *sector_bits; int chain_pos; @@ -84,16 +82,14 @@ static int str9xpec_write_options(struct flash_bank *bank); static int str9xpec_set_instr(struct jtag_tap *tap, uint32_t new_instr, tap_state_t end_state) { - if (tap == NULL) { + if (tap == NULL) return ERROR_TARGET_INVALID; - } - if (buf_get_u32(tap->cur_instr, 0, tap->ir_length) != new_instr) - { + if (buf_get_u32(tap->cur_instr, 0, tap->ir_length) != new_instr) { struct scan_field field; field.num_bits = tap->ir_length; - void * t = calloc(DIV_ROUND_UP(field.num_bits, 8), 1); + void *t = calloc(DIV_ROUND_UP(field.num_bits, 8), 1); field.out_value = t; buf_set_u32(t, 0, field.num_bits, new_instr); field.in_value = NULL; @@ -147,8 +143,7 @@ static int str9xpec_isc_enable(struct flash_bank *bank) /* check ISC status */ status = str9xpec_isc_status(tap); - if (status & ISC_STATUS_MODE) - { + if (status & ISC_STATUS_MODE) { /* we have entered isc mode */ str9xpec_info->isc_enable = 1; LOG_DEBUG("ISC_MODE Enabled"); @@ -176,8 +171,7 @@ static int str9xpec_isc_disable(struct flash_bank *bank) /* check ISC status */ status = str9xpec_isc_status(tap); - if (!(status & ISC_STATUS_MODE)) - { + if (!(status & ISC_STATUS_MODE)) { /* we have left isc mode */ str9xpec_info->isc_enable = 0; LOG_DEBUG("ISC_MODE Disabled"); @@ -224,8 +218,7 @@ static int str9xpec_build_block_list(struct flash_bank *bank) uint32_t offset = 0; int b1_size = 0x2000; - switch (bank->size) - { + switch (bank->size) { case (256 * 1024): b0_sectors = 4; break; @@ -258,8 +251,7 @@ static int str9xpec_build_block_list(struct flash_bank *bank) num_sectors = 0; - for (i = 0; i < b0_sectors; i++) - { + for (i = 0; i < b0_sectors; i++) { bank->sectors[num_sectors].offset = offset; bank->sectors[num_sectors].size = 0x10000; offset += bank->sectors[i].size; @@ -268,8 +260,7 @@ static int str9xpec_build_block_list(struct flash_bank *bank) str9xpec_info->sector_bits[num_sectors++] = i; } - for (i = 0; i < b1_sectors; i++) - { + for (i = 0; i < b1_sectors; i++) { bank->sectors[num_sectors].offset = offset; bank->sectors[num_sectors].size = b1_size; offset += bank->sectors[i].size; @@ -291,9 +282,7 @@ FLASH_BANK_COMMAND_HANDLER(str9xpec_flash_bank_command) struct arm_jtag *jtag_info = NULL; if (CMD_ARGC < 6) - { return ERROR_COMMAND_SYNTAX_ERROR; - } str9xpec_info = malloc(sizeof(struct str9xpec_flash_controller)); bank->driver_priv = str9xpec_info; @@ -329,21 +318,18 @@ static int str9xpec_blank_check(struct flash_bank *bank, int first, int last) tap = str9xpec_info->tap; - if (!str9xpec_info->isc_enable) { + if (!str9xpec_info->isc_enable) str9xpec_isc_enable(bank); - } - if (!str9xpec_info->isc_enable) { + if (!str9xpec_info->isc_enable) return ERROR_FLASH_OPERATION_FAILED; - } buffer = calloc(DIV_ROUND_UP(64, 8), 1); LOG_DEBUG("blank check: first_bank: %i, last_bank: %i", first, last); - for (i = first; i <= last; i++) { + for (i = first; i <= last; i++) buf_set_u32(buffer, str9xpec_info->sector_bits[i], 1, 1); - } /* execute ISC_BLANK_CHECK command */ str9xpec_set_instr(tap, ISC_BLANK_CHECK, TAP_IRPAUSE); @@ -365,8 +351,7 @@ static int str9xpec_blank_check(struct flash_bank *bank, int first, int last) status = str9xpec_isc_status(tap); - for (i = first; i <= last; i++) - { + for (i = first; i <= last; i++) { if (buf_get_u32(buffer, str9xpec_info->sector_bits[i], 1)) bank->sectors[i].is_erased = 0; else @@ -391,8 +376,7 @@ static int str9xpec_protect_check(struct flash_bank *bank) status = str9xpec_read_config(bank); - for (i = 0; i < bank->num_sectors; i++) - { + for (i = 0; i < bank->num_sectors; i++) { if (buf_get_u32(str9xpec_info->options, str9xpec_info->sector_bits[i], 1)) bank->sectors[i].is_protected = 1; else @@ -416,13 +400,11 @@ static int str9xpec_erase_area(struct flash_bank *bank, int first, int last) tap = str9xpec_info->tap; - if (!str9xpec_info->isc_enable) { + if (!str9xpec_info->isc_enable) str9xpec_isc_enable(bank); - } - if (!str9xpec_info->isc_enable) { + if (!str9xpec_info->isc_enable) return ISC_STATUS_ERROR; - } buffer = calloc(DIV_ROUND_UP(64, 8), 1); @@ -430,21 +412,14 @@ static int str9xpec_erase_area(struct flash_bank *bank, int first, int last) /* last bank: 0xFF signals a full erase (unlock complete device) */ /* last bank: 0xFE signals a option byte erase */ - if (last == 0xFF) - { - for (i = 0; i < 64; i++) { + if (last == 0xFF) { + for (i = 0; i < 64; i++) buf_set_u32(buffer, i, 1, 1); - } - } - else if (last == 0xFE) - { + } else if (last == 0xFE) buf_set_u32(buffer, 49, 1, 1); - } - else - { - for (i = first; i <= last; i++) { + else { + for (i = first; i <= last; i++) buf_set_u32(buffer, str9xpec_info->sector_bits[i], 1, 1); - } } LOG_DEBUG("ISC_ERASE"); @@ -462,9 +437,8 @@ static int str9xpec_erase_area(struct flash_bank *bank, int first, int last) jtag_add_sleep(10); /* wait for erase completion */ - while (!((status = str9xpec_isc_status(tap)) & ISC_STATUS_BUSY)) { + while (!((status = str9xpec_isc_status(tap)) & ISC_STATUS_BUSY)) alive_sleep(1); - } free(buffer); @@ -495,13 +469,11 @@ static int str9xpec_lock_device(struct flash_bank *bank) str9xpec_info = bank->driver_priv; tap = str9xpec_info->tap; - if (!str9xpec_info->isc_enable) { + if (!str9xpec_info->isc_enable) str9xpec_isc_enable(bank); - } - if (!str9xpec_info->isc_enable) { + if (!str9xpec_info->isc_enable) return ISC_STATUS_ERROR; - } /* set security address */ str9xpec_set_address(bank, 0x80); @@ -550,22 +522,15 @@ static int str9xpec_protect(struct flash_bank *bank, int set, int first, int las LOG_DEBUG("protect: first_bank: %i, last_bank: %i", first, last); /* last bank: 0xFF signals a full device protect */ - if (last == 0xFF) - { + if (last == 0xFF) { if (set) - { status = str9xpec_lock_device(bank); - } - else - { + else { /* perform full erase to unlock device */ status = str9xpec_unlock_device(bank); } - } - else - { - for (i = first; i <= last; i++) - { + } else { + for (i = first; i <= last; i++) { if (set) buf_set_u32(str9xpec_info->options, str9xpec_info->sector_bits[i], 1, 1); else @@ -619,28 +584,23 @@ static int str9xpec_write(struct flash_bank *bank, uint8_t *buffer, tap = str9xpec_info->tap; - if (!str9xpec_info->isc_enable) { + if (!str9xpec_info->isc_enable) str9xpec_isc_enable(bank); - } - if (!str9xpec_info->isc_enable) { + if (!str9xpec_info->isc_enable) return ERROR_FLASH_OPERATION_FAILED; - } - if (offset & 0x7) - { + if (offset & 0x7) { LOG_WARNING("offset 0x%" PRIx32 " breaks required 8-byte alignment", offset); return ERROR_FLASH_DST_BREAKS_ALIGNMENT; } - for (i = 0; i < bank->num_sectors; i++) - { + for (i = 0; i < bank->num_sectors; i++) { uint32_t sec_start = bank->sectors[i].offset; uint32_t sec_end = sec_start + bank->sectors[i].size; /* check if destination falls within the current sector */ - if ((check_address >= sec_start) && (check_address < sec_end)) - { + if ((check_address >= sec_start) && (check_address < sec_end)) { /* check if destination ends in the current sector */ if (offset + count < sec_end) check_address = offset + count; @@ -648,13 +608,11 @@ static int str9xpec_write(struct flash_bank *bank, uint8_t *buffer, check_address = sec_end; } - if ((offset >= sec_start) && (offset < sec_end)) { + if ((offset >= sec_start) && (offset < sec_end)) first_sector = i; - } - if ((offset + count >= sec_start) && (offset + count < sec_end)) { + if ((offset + count >= sec_start) && (offset + count < sec_end)) last_sector = i; - } } if (check_address != offset + count) @@ -666,15 +624,13 @@ static int str9xpec_write(struct flash_bank *bank, uint8_t *buffer, LOG_DEBUG("ISC_PROGRAM"); - for (i = first_sector; i <= last_sector; i++) - { + for (i = first_sector; i <= last_sector; i++) { str9xpec_set_address(bank, str9xpec_info->sector_bits[i]); dwords_remaining = dwords_remaining < (bank->sectors[i].size/8) ? dwords_remaining : (bank->sectors[i].size/8); - while (dwords_remaining > 0) - { + while (dwords_remaining > 0) { str9xpec_set_instr(tap, ISC_PROGRAM, TAP_IRPAUSE); field.num_bits = 64; @@ -711,8 +667,7 @@ static int str9xpec_write(struct flash_bank *bank, uint8_t *buffer, } } - if (bytes_remaining) - { + if (bytes_remaining) { uint8_t last_dword[8] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; /* copy the last remaining bytes into the write buffer */ @@ -818,9 +773,7 @@ COMMAND_HANDLER(str9xpec_handle_flash_options_read_command) struct str9xpec_flash_controller *str9xpec_info = NULL; if (CMD_ARGC < 1) - { return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); @@ -883,13 +836,11 @@ static int str9xpec_write_options(struct flash_bank *bank) if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS) return status; - if (!str9xpec_info->isc_enable) { + if (!str9xpec_info->isc_enable) str9xpec_isc_enable(bank); - } - if (!str9xpec_info->isc_enable) { + if (!str9xpec_info->isc_enable) return ISC_STATUS_ERROR; - } /* according to data 64th bit has to be set */ buf_set_u32(str9xpec_info->options, 63, 1, 1); @@ -931,9 +882,7 @@ COMMAND_HANDLER(str9xpec_handle_flash_options_write_command) uint8_t status; if (CMD_ARGC < 1) - { return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); @@ -957,9 +906,7 @@ COMMAND_HANDLER(str9xpec_handle_flash_options_cmap_command) struct str9xpec_flash_controller *str9xpec_info = NULL; if (CMD_ARGC < 2) - { return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); @@ -969,13 +916,9 @@ COMMAND_HANDLER(str9xpec_handle_flash_options_cmap_command) str9xpec_info = bank->driver_priv; if (strcmp(CMD_ARGV[1], "bank1") == 0) - { buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_CSMAPBIT, 1, 1); - } else - { buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_CSMAPBIT, 1, 0); - } return ERROR_OK; } @@ -985,9 +928,7 @@ COMMAND_HANDLER(str9xpec_handle_flash_options_lvdthd_command) struct str9xpec_flash_controller *str9xpec_info = NULL; if (CMD_ARGC < 2) - { return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); @@ -997,13 +938,9 @@ COMMAND_HANDLER(str9xpec_handle_flash_options_lvdthd_command) str9xpec_info = bank->driver_priv; if (strcmp(CMD_ARGV[1], "2.7v") == 0) - { buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_LVDTHRESBIT, 1, 1); - } else - { buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_LVDTHRESBIT, 1, 0); - } return ERROR_OK; } @@ -1013,9 +950,7 @@ COMMAND_HANDLER(str9xpec_handle_flash_options_lvdsel_command) struct str9xpec_flash_controller *str9xpec_info = NULL; if (CMD_ARGC < 2) - { return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); @@ -1025,13 +960,9 @@ COMMAND_HANDLER(str9xpec_handle_flash_options_lvdsel_command) str9xpec_info = bank->driver_priv; if (strcmp(CMD_ARGV[1], "vdd_vddq") == 0) - { buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_LVDSELBIT, 1, 1); - } else - { buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_LVDSELBIT, 1, 0); - } return ERROR_OK; } @@ -1041,9 +972,7 @@ COMMAND_HANDLER(str9xpec_handle_flash_options_lvdwarn_command) struct str9xpec_flash_controller *str9xpec_info = NULL; if (CMD_ARGC < 2) - { return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); @@ -1053,13 +982,9 @@ COMMAND_HANDLER(str9xpec_handle_flash_options_lvdwarn_command) str9xpec_info = bank->driver_priv; if (strcmp(CMD_ARGV[1], "vdd_vddq") == 0) - { buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_LVDWARNBIT, 1, 1); - } else - { buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_LVDWARNBIT, 1, 0); - } return ERROR_OK; } @@ -1069,9 +994,7 @@ COMMAND_HANDLER(str9xpec_handle_flash_lock_command) uint8_t status; if (CMD_ARGC < 1) - { return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); @@ -1091,9 +1014,7 @@ COMMAND_HANDLER(str9xpec_handle_flash_unlock_command) uint8_t status; if (CMD_ARGC < 1) - { return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); @@ -1120,9 +1041,7 @@ COMMAND_HANDLER(str9xpec_handle_flash_enable_turbo_command) struct str9xpec_flash_controller *str9xpec_info = NULL; if (CMD_ARGC < 1) - { return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); @@ -1135,23 +1054,22 @@ COMMAND_HANDLER(str9xpec_handle_flash_enable_turbo_command) /* remove arm core from chain - enter turbo mode */ tap1 = tap0->next_tap; - if (tap1 == NULL) - { + if (tap1 == NULL) { /* things are *WRONG* */ - command_print(CMD_CTX,"**STR9FLASH** (tap1) invalid chain?"); + command_print(CMD_CTX, "**STR9FLASH** (tap1) invalid chain?"); return ERROR_OK; } tap2 = tap1->next_tap; - if (tap2 == NULL) - { + if (tap2 == NULL) { /* things are *WRONG* */ - command_print(CMD_CTX,"**STR9FLASH** (tap2) invalid chain?"); + command_print(CMD_CTX, "**STR9FLASH** (tap2) invalid chain?"); return ERROR_OK; } /* enable turbo mode - TURBO-PROG-ENABLE */ str9xpec_set_instr(tap2, 0xD, TAP_IDLE); - if ((retval = jtag_execute_queue()) != ERROR_OK) + retval = jtag_execute_queue(); + if (retval != ERROR_OK) return retval; /* modify scan chain - str9 core has been removed */ @@ -1166,9 +1084,7 @@ COMMAND_HANDLER(str9xpec_handle_flash_disable_turbo_command) struct str9xpec_flash_controller *str9xpec_info = NULL; if (CMD_ARGC < 1) - { return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *bank; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); @@ -1187,9 +1103,8 @@ COMMAND_HANDLER(str9xpec_handle_flash_disable_turbo_command) jtag_execute_queue(); /* restore previous scan chain */ - if (tap->next_tap) { + if (tap->next_tap) tap->next_tap->enabled = 1; - } return ERROR_OK; } diff --git a/src/flash/nor/tcl.c b/src/flash/nor/tcl.c index 735caa8e..ec80f6ff 100644 --- a/src/flash/nor/tcl.c +++ b/src/flash/nor/tcl.c @@ -32,7 +32,7 @@ */ COMMAND_HELPER(flash_command_get_bank, unsigned name_index, - struct flash_bank **bank) + struct flash_bank **bank) { const char *name = CMD_ARGV[name_index]; int retval = get_flash_bank_by_name(name, bank); @@ -47,7 +47,6 @@ COMMAND_HELPER(flash_command_get_bank, unsigned name_index, return get_flash_bank_by_num(bank_num, bank); } - COMMAND_HANDLER(handle_flash_info_command) { struct flash_bank *p; @@ -61,12 +60,12 @@ COMMAND_HANDLER(handle_flash_info_command) if (retval != ERROR_OK) return retval; - if (p != NULL) - { + if (p != NULL) { char buf[1024]; /* attempt auto probe */ - if ((retval = p->driver->auto_probe(p)) != ERROR_OK) + retval = p->driver->auto_probe(p); + if (retval != ERROR_OK) return retval; /* We must query the hardware to avoid printing stale information! */ @@ -75,15 +74,15 @@ COMMAND_HANDLER(handle_flash_info_command) return retval; command_print(CMD_CTX, - "#%" PRIu32 " : %s at 0x%8.8" PRIx32 ", size 0x%8.8" PRIx32 ", buswidth %i, chipwidth %i", - p->bank_number, - p->driver->name, - p->base, - p->size, - p->bus_width, - p->chip_width); - for (j = 0; j < p->num_sectors; j++) - { + "#%" PRIu32 " : %s at 0x%8.8" PRIx32 ", size 0x%8.8" PRIx32 + ", buswidth %i, chipwidth %i", + p->bank_number, + p->driver->name, + p->base, + p->size, + p->bus_width, + p->chip_width); + for (j = 0; j < p->num_sectors; j++) { char *protect_state; if (p->sectors[j].is_protected == 0) @@ -94,15 +93,16 @@ COMMAND_HANDLER(handle_flash_info_command) protect_state = "protection state unknown"; command_print(CMD_CTX, - "\t#%3i: 0x%8.8" PRIx32 " (0x%" PRIx32 " %" PRIi32 "kB) %s", - j, - p->sectors[j].offset, - p->sectors[j].size, - p->sectors[j].size >> 10, - protect_state); + "\t#%3i: 0x%8.8" PRIx32 " (0x%" PRIx32 " %" PRIi32 "kB) %s", + j, + p->sectors[j].offset, + p->sectors[j].size, + p->sectors[j].size >> 10, + protect_state); } - *buf = '\0'; /* initialize buffer, otherwise it migh contain garbage if driver function fails */ + *buf = '\0'; /* initialize buffer, otherwise it migh contain garbage if driver + *function fails */ retval = p->driver->info(p, buf, sizeof(buf)); command_print(CMD_CTX, "%s", buf); if (retval != ERROR_OK) @@ -118,23 +118,20 @@ COMMAND_HANDLER(handle_flash_probe_command) int retval; if (CMD_ARGC != 1) - { return ERROR_COMMAND_SYNTAX_ERROR; - } retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &p); if (retval != ERROR_OK) return retval; - if (p) - { - if ((retval = p->driver->probe(p)) == ERROR_OK) - { - command_print(CMD_CTX, "flash '%s' found at 0x%8.8" PRIx32, p->driver->name, p->base); - } - } - else - { + if (p) { + retval = p->driver->probe(p); + if (retval == ERROR_OK) + command_print(CMD_CTX, + "flash '%s' found at 0x%8.8" PRIx32, + p->driver->name, + p->base); + } else { command_print(CMD_CTX, "flash bank '#%s' is out of bounds", CMD_ARGV[0]); retval = ERROR_FAIL; } @@ -145,9 +142,7 @@ COMMAND_HANDLER(handle_flash_probe_command) COMMAND_HANDLER(handle_flash_erase_check_command) { if (CMD_ARGC != 1) - { return ERROR_COMMAND_SYNTAX_ERROR; - } struct flash_bank *p; int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &p); @@ -155,18 +150,17 @@ COMMAND_HANDLER(handle_flash_erase_check_command) return retval; int j; - if ((retval = p->driver->erase_check(p)) == ERROR_OK) - { + retval = p->driver->erase_check(p); + if (retval == ERROR_OK) command_print(CMD_CTX, "successfully checked erase state"); - } - else - { - command_print(CMD_CTX, "unknown error when checking erase state of flash bank #%s at 0x%8.8" PRIx32, - CMD_ARGV[0], p->base); + else { + command_print(CMD_CTX, + "unknown error when checking erase state of flash bank #%s at 0x%8.8" PRIx32, + CMD_ARGV[0], + p->base); } - for (j = 0; j < p->num_sectors; j++) - { + for (j = 0; j < p->num_sectors; j++) { char *erase_state; if (p->sectors[j].is_erased == 0) @@ -177,12 +171,12 @@ COMMAND_HANDLER(handle_flash_erase_check_command) erase_state = "erase state unknown"; command_print(CMD_CTX, - "\t#%3i: 0x%8.8" PRIx32 " (0x%" PRIx32 " %" PRIi32 "kB) %s", - j, - p->sectors[j].offset, - p->sectors[j].size, - p->sectors[j].size >> 10, - erase_state); + "\t#%3i: 0x%8.8" PRIx32 " (0x%" PRIx32 " %" PRIi32 "kB) %s", + j, + p->sectors[j].offset, + p->sectors[j].size, + p->sectors[j].size >> 10, + erase_state); } return retval; @@ -198,35 +192,27 @@ COMMAND_HANDLER(handle_flash_erase_address_command) bool do_unlock = false; struct target *target = get_current_target(CMD_CTX); - while (CMD_ARGC >= 3) - { + while (CMD_ARGC >= 3) { /* Optionally pad out the address range to block/sector * boundaries. We can't know if there's data in that part * of the flash; only do padding if we're told to. */ if (strcmp("pad", CMD_ARGV[0]) == 0) - { do_pad = true; - } else if (strcmp("unlock", CMD_ARGV[0]) == 0) - { + else if (strcmp("unlock", CMD_ARGV[0]) == 0) do_unlock = true; - } else - { + else return ERROR_COMMAND_SYNTAX_ERROR; - } CMD_ARGC--; CMD_ARGV++; } if (CMD_ARGC != 2) - { return ERROR_COMMAND_SYNTAX_ERROR; - } COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], address); COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], length); - if (length <= 0) - { + if (length <= 0) { command_print(CMD_CTX, "Length must be >0"); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -235,44 +221,40 @@ COMMAND_HANDLER(handle_flash_erase_address_command) if (retval != ERROR_OK) return retval; - /* We can't know if we did a resume + halt, in which case we no longer know the erased state */ + /* We can't know if we did a resume + halt, in which case we no longer know the erased state + **/ flash_set_dirty(); struct duration bench; duration_start(&bench); if (do_unlock) - { retval = flash_unlock_address_range(target, address, length); - } if (retval == ERROR_OK) - { retval = flash_erase_address_range(target, do_pad, address, length); - } - if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK)) - { + if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK)) { command_print(CMD_CTX, "erased address 0x%8.8x (length %i)" - " in %fs (%0.3f KiB/s)", address, length, - duration_elapsed(&bench), duration_kbps(&bench, length)); + " in %fs (%0.3f KiB/s)", address, length, + duration_elapsed(&bench), duration_kbps(&bench, length)); } return retval; } static int flash_check_sector_parameters(struct command_context *cmd_ctx, - uint32_t first, uint32_t last, uint32_t num_sectors) + uint32_t first, uint32_t last, uint32_t num_sectors) { if (!(first <= last)) { command_print(cmd_ctx, "ERROR: " - "first sector must be <= last sector"); + "first sector must be <= last sector"); return ERROR_FAIL; } if (!(last <= (num_sectors - 1))) { command_print(cmd_ctx, "ERROR: last sector must be <= %d", - (int) num_sectors - 1); + (int) num_sectors - 1); return ERROR_FAIL; } @@ -300,8 +282,8 @@ COMMAND_HANDLER(handle_flash_erase_command) else COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], last); - if ((retval = flash_check_sector_parameters(CMD_CTX, - first, last, p->num_sectors)) != ERROR_OK) + retval = flash_check_sector_parameters(CMD_CTX, first, last, p->num_sectors); + if (retval != ERROR_OK) return retval; struct duration bench; @@ -309,11 +291,10 @@ COMMAND_HANDLER(handle_flash_erase_command) retval = flash_driver_erase(p, first, last); - if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK)) - { + if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK)) { command_print(CMD_CTX, "erased sectors %" PRIu32 " " - "through %" PRIu32" on flash bank %" PRIu32 " " - "in %fs", first, last, p->bank_number, duration_elapsed(&bench)); + "through %" PRIu32 " on flash bank %" PRIu32 " " + "in %fs", first, last, p->bank_number, duration_elapsed(&bench)); } return ERROR_OK; @@ -343,14 +324,14 @@ COMMAND_HANDLER(handle_flash_protect_command) bool set; COMMAND_PARSE_ON_OFF(CMD_ARGV[3], set); - if ((retval = flash_check_sector_parameters(CMD_CTX, - first, last, p->num_sectors)) != ERROR_OK) + retval = flash_check_sector_parameters(CMD_CTX, first, last, p->num_sectors); + if (retval != ERROR_OK) return retval; retval = flash_driver_protect(p, set, first, last); if (retval == ERROR_OK) { command_print(CMD_CTX, "%s protection for sectors %i " - "through %i on flash bank %" PRIu32 "", + "through %i on flash bank %" PRIu32 "", (set) ? "set" : "cleared", (int) first, (int) last, p->bank_number); } @@ -368,41 +349,31 @@ COMMAND_HANDLER(handle_flash_write_image_command) int retval; if (CMD_ARGC < 1) - { return ERROR_COMMAND_SYNTAX_ERROR; - } /* flash auto-erase is disabled by default*/ int auto_erase = 0; bool auto_unlock = false; - for (;;) - { - if (strcmp(CMD_ARGV[0], "erase") == 0) - { + for (;; ) { + if (strcmp(CMD_ARGV[0], "erase") == 0) { auto_erase = 1; CMD_ARGV++; CMD_ARGC--; command_print(CMD_CTX, "auto erase enabled"); - } else if (strcmp(CMD_ARGV[0], "unlock") == 0) - { + } else if (strcmp(CMD_ARGV[0], "unlock") == 0) { auto_unlock = true; CMD_ARGV++; CMD_ARGC--; command_print(CMD_CTX, "auto unlock enabled"); } else - { break; - } } if (CMD_ARGC < 1) - { return ERROR_COMMAND_SYNTAX_ERROR; - } - if (!target) - { + if (!target) { LOG_ERROR("no target selected"); return ERROR_FAIL; } @@ -410,13 +381,10 @@ COMMAND_HANDLER(handle_flash_write_image_command) struct duration bench; duration_start(&bench); - if (CMD_ARGC >= 2) - { + if (CMD_ARGC >= 2) { image.base_address_set = 1; COMMAND_PARSE_NUMBER(llong, CMD_ARGV[1], image.base_address); - } - else - { + } else { image.base_address_set = 0; image.base_address = 0x0; } @@ -425,22 +393,18 @@ COMMAND_HANDLER(handle_flash_write_image_command) retval = image_open(&image, CMD_ARGV[0], (CMD_ARGC == 3) ? CMD_ARGV[2] : NULL); if (retval != ERROR_OK) - { return retval; - } retval = flash_write_unlock(target, &image, &written, auto_erase, auto_unlock); - if (retval != ERROR_OK) - { + if (retval != ERROR_OK) { image_close(&image); return retval; } - if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK)) - { + if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK)) { command_print(CMD_CTX, "wrote %" PRIu32 " bytes from file %s " - "in %fs (%0.3f KiB/s)", written, CMD_ARGV[0], - duration_elapsed(&bench), duration_kbps(&bench, written)); + "in %fs (%0.3f KiB/s)", written, CMD_ARGV[0], + duration_elapsed(&bench), duration_kbps(&bench, written)); } image_close(&image); @@ -468,20 +432,17 @@ COMMAND_HANDLER(handle_flash_fill_command) return ERROR_FAIL; uint8_t *readback = malloc(chunksize); - if (readback == NULL) - { + if (readback == NULL) { free(chunk); return ERROR_FAIL; } - if (CMD_ARGC != 3) - { + if (CMD_ARGC != 3) { retval = ERROR_COMMAND_SYNTAX_ERROR; goto done; } - COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], address); COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], pattern); COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], count); @@ -489,88 +450,79 @@ COMMAND_HANDLER(handle_flash_fill_command) if (count == 0) goto done; - switch (CMD_NAME[4]) - { - case 'w': - wordsize = 4; - break; - case 'h': - wordsize = 2; - break; - case 'b': - wordsize = 1; - break; - default: - retval = ERROR_COMMAND_SYNTAX_ERROR; - goto done; + switch (CMD_NAME[4]) { + case 'w': + wordsize = 4; + break; + case 'h': + wordsize = 2; + break; + case 'b': + wordsize = 1; + break; + default: + retval = ERROR_COMMAND_SYNTAX_ERROR; + goto done; } chunk_count = MIN(count, (chunksize / wordsize)); - switch (wordsize) - { - case 4: - for (i = 0; i < chunk_count; i++) - { - target_buffer_set_u32(target, chunk + i * wordsize, pattern); - } - break; - case 2: - for (i = 0; i < chunk_count; i++) - { - target_buffer_set_u16(target, chunk + i * wordsize, pattern); - } - break; - case 1: - memset(chunk, pattern, chunk_count); - break; - default: - LOG_ERROR("BUG: can't happen"); - exit(-1); + switch (wordsize) { + case 4: + for (i = 0; i < chunk_count; i++) + target_buffer_set_u32(target, chunk + i * wordsize, pattern); + break; + case 2: + for (i = 0; i < chunk_count; i++) + target_buffer_set_u16(target, chunk + i * wordsize, pattern); + break; + case 1: + memset(chunk, pattern, chunk_count); + break; + default: + LOG_ERROR("BUG: can't happen"); + exit(-1); } struct duration bench; duration_start(&bench); - for (wrote = 0; wrote < (count*wordsize); wrote += cur_size) - { + for (wrote = 0; wrote < (count*wordsize); wrote += cur_size) { struct flash_bank *bank; - retval = get_flash_bank_by_addr(target, address, true, &bank ); + retval = get_flash_bank_by_addr(target, address, true, &bank); if (retval != ERROR_OK) goto done; cur_size = MIN((count * wordsize - wrote), chunksize); err = flash_driver_write(bank, chunk, address - bank->base + wrote, cur_size); - if (err != ERROR_OK) - { + if (err != ERROR_OK) { retval = err; goto done; } err = flash_driver_read(bank, readback, address - bank->base + wrote, cur_size); - if (err != ERROR_OK) - { + if (err != ERROR_OK) { retval = err; goto done; } - for (i = 0; i < cur_size; i++) - { - if (readback[i]!=chunk[i]) - { - LOG_ERROR("Verification error address 0x%08" PRIx32 ", read back 0x%02x, expected 0x%02x", - address + wrote + i, readback[i], chunk[i]); + for (i = 0; i < cur_size; i++) { + if (readback[i] != chunk[i]) { + LOG_ERROR( + "Verification error address 0x%08" PRIx32 ", read back 0x%02x, expected 0x%02x", + address + wrote + i, + readback[i], + chunk[i]); retval = ERROR_FAIL; goto done; } } } - if ((retval == ERROR_OK) && (duration_measure(&bench) == ERROR_OK)) - { + if ((retval == ERROR_OK) && (duration_measure(&bench) == ERROR_OK)) { command_print(CMD_CTX, "wrote %" PRIu32 " bytes to 0x%8.8" PRIx32 - " in %fs (%0.3f KiB/s)", wrote, address, - duration_elapsed(&bench), duration_kbps(&bench, wrote)); + " in %fs (%0.3f KiB/s)", wrote, address, + duration_elapsed(&bench), duration_kbps(&bench, wrote)); } done: @@ -600,28 +552,23 @@ COMMAND_HANDLER(handle_flash_write_bank_command) COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], offset); if (fileio_open(&fileio, CMD_ARGV[1], FILEIO_READ, FILEIO_BINARY) != ERROR_OK) - { return ERROR_OK; - } int filesize; retval = fileio_size(&fileio, &filesize); - if (retval != ERROR_OK) - { + if (retval != ERROR_OK) { fileio_close(&fileio); return retval; } buffer = malloc(filesize); - if (buffer == NULL) - { + if (buffer == NULL) { fileio_close(&fileio); LOG_ERROR("Out of memory"); return ERROR_FAIL; } size_t buf_cnt; - if (fileio_read(&fileio, filesize, buffer, &buf_cnt) != ERROR_OK) - { + if (fileio_read(&fileio, filesize, buffer, &buf_cnt) != ERROR_OK) { free(buffer); fileio_close(&fileio); return ERROR_OK; @@ -632,12 +579,11 @@ COMMAND_HANDLER(handle_flash_write_bank_command) free(buffer); buffer = NULL; - if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK)) - { + if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK)) { command_print(CMD_CTX, "wrote %ld bytes from file %s to flash bank %u" - " at offset 0x%8.8" PRIx32 " in %fs (%0.3f KiB/s)", - (long)filesize, CMD_ARGV[1], p->bank_number, offset, - duration_elapsed(&bench), duration_kbps(&bench, filesize)); + " at offset 0x%8.8" PRIx32 " in %fs (%0.3f KiB/s)", + (long)filesize, CMD_ARGV[1], p->bank_number, offset, + duration_elapsed(&bench), duration_kbps(&bench, filesize)); } fileio_close(&fileio); @@ -651,12 +597,9 @@ void flash_set_dirty(void) int i; /* set all flash to require erasing */ - for (c = flash_bank_list(); c; c = c->next) - { + for (c = flash_bank_list(); c; c = c->next) { for (i = 0; i < c->num_sectors; i++) - { c->sectors[i].is_erased = 0; - } } } @@ -770,49 +713,43 @@ static int flash_init_drivers(struct command_context *cmd_ctx) COMMAND_HANDLER(handle_flash_bank_command) { - if (CMD_ARGC < 7) - { + if (CMD_ARGC < 7) { LOG_ERROR("usage: flash bank " - " "); + " "); return ERROR_COMMAND_SYNTAX_ERROR; } - // save bank name and advance arguments for compatibility + /* save bank name and advance arguments for compatibility */ const char *bank_name = *CMD_ARGV++; CMD_ARGC--; - struct target *target; - if ((target = get_target(CMD_ARGV[5])) == NULL) - { + struct target *target = get_target(CMD_ARGV[5]); + if (target == NULL) { LOG_ERROR("target '%s' not defined", CMD_ARGV[5]); return ERROR_FAIL; } const char *driver_name = CMD_ARGV[0]; struct flash_driver *driver = flash_driver_find_by_name(driver_name); - if (NULL == driver) - { + if (NULL == driver) { /* no matching flash driver found */ LOG_ERROR("flash driver '%s' not found", driver_name); return ERROR_FAIL; } /* check the flash bank name is unique */ - if (get_flash_bank_by_name_noprobe(bank_name) != NULL) - { + if (get_flash_bank_by_name_noprobe(bank_name) != NULL) { /* flash bank name already exists */ LOG_ERROR("flash bank name '%s' already exists", bank_name); return ERROR_FAIL; } /* register flash specific commands */ - if (NULL != driver->commands) - { + if (NULL != driver->commands) { int retval = register_commands(CMD_CTX, NULL, driver->commands); - if (ERROR_OK != retval) - { + if (ERROR_OK != retval) { LOG_ERROR("couldn't register '%s' commands", - driver_name); + driver_name); return ERROR_FAIL; } } @@ -832,10 +769,9 @@ COMMAND_HANDLER(handle_flash_bank_command) int retval; retval = CALL_COMMAND_HANDLER(driver->flash_bank_command, c); - if (ERROR_OK != retval) - { + if (ERROR_OK != retval) { LOG_ERROR("'%s' driver rejected flash bank at 0x%8.8" PRIx32 "Usage %s", - driver_name, c->base, driver->usage); + driver_name, c->base, driver->usage); free(c); return retval; } @@ -854,8 +790,7 @@ COMMAND_HANDLER(handle_flash_banks_command) return ERROR_COMMAND_SYNTAX_ERROR; unsigned n = 0; - for (struct flash_bank *p = flash_bank_list(); p; p = p->next, n++) - { + for (struct flash_bank *p = flash_bank_list(); p; p = p->next, n++) { LOG_USER("#%" PRIu32 " : %s (%s) at 0x%8.8" PRIx32 ", size 0x%8.8" PRIx32 ", " "buswidth %u, chipwidth %u", p->bank_number, p->name, p->driver->name, p->base, p->size, @@ -864,19 +799,17 @@ COMMAND_HANDLER(handle_flash_banks_command) return ERROR_OK; } -static int jim_flash_list(Jim_Interp *interp, int argc, Jim_Obj *const *argv) +static int jim_flash_list(Jim_Interp *interp, int argc, Jim_Obj * const *argv) { - if (argc != 1) - { + if (argc != 1) { Jim_WrongNumArgs(interp, 1, argv, - "no arguments to 'flash list' command"); + "no arguments to 'flash list' command"); return JIM_ERR; } Jim_Obj *list = Jim_NewListObj(interp, NULL, 0); - for (struct flash_bank *p = flash_bank_list(); p; p = p->next) - { + for (struct flash_bank *p = flash_bank_list(); p; p = p->next) { Jim_Obj *elem = Jim_NewListObj(interp, NULL, 0); Jim_ListAppendElement(interp, elem, Jim_NewStringObj(interp, "name", -1)); @@ -898,15 +831,13 @@ static int jim_flash_list(Jim_Interp *interp, int argc, Jim_Obj *const *argv) return JIM_OK; } - COMMAND_HANDLER(handle_flash_init_command) { if (CMD_ARGC != 0) return ERROR_COMMAND_SYNTAX_ERROR; - static bool flash_initialized = false; - if (flash_initialized) - { + static bool flash_initialized; + if (flash_initialized) { LOG_INFO("'flash init' has already been called"); return ERROR_OK; } diff --git a/src/flash/nor/tms470.c b/src/flash/nor/tms470.c index 393ca76e..7aebed73 100644 --- a/src/flash/nor/tms470.c +++ b/src/flash/nor/tms470.c @@ -17,19 +17,18 @@ * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ + #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "imp.h" - /* ---------------------------------------------------------------------- - Internal Support, Helpers - ---------------------------------------------------------------------- */ + * Internal Support, Helpers + * ---------------------------------------------------------------------- */ -struct tms470_flash_bank -{ +struct tms470_flash_bank { unsigned ordinal; /* device identification register */ @@ -38,7 +37,7 @@ struct tms470_flash_bank uint32_t technology_family; uint32_t rom_flash; uint32_t part_number; - const char * part_name; + const char *part_name; }; @@ -134,15 +133,14 @@ static int tms470_read_part_info(struct flash_bank *bank) /* we shall not rely on the caller in this test, this function allocates memory, thus and executing the code more than once may cause memory leak */ if (tms470_info->device_ident_reg) - return ERROR_OK; + return ERROR_OK; /* read and parse the device identification register */ target_read_u32(target, 0xFFFFFFF0, &device_ident_reg); LOG_INFO("device_ident_reg = 0x%08" PRIx32 "", device_ident_reg); - if ((device_ident_reg & 7) == 0) - { + if ((device_ident_reg & 7) == 0) { LOG_WARNING("Cannot identify target as a TMS470 family."); return ERROR_FLASH_OPERATION_FAILED; } @@ -152,8 +150,7 @@ static int tms470_read_part_info(struct flash_bank *bank) rom_flash = (device_ident_reg >> 10) & 1; part_number = (device_ident_reg >> 3) & 0x7f; - if (bank->sectors) - { + if (bank->sectors) { free(bank->sectors); bank->sectors = NULL; } @@ -164,116 +161,100 @@ static int tms470_read_part_info(struct flash_bank *bank) * ranges. Then fixup/complete the remaining fields of the flash * bank structure. */ - switch (part_number) - { - case 0x0a: - part_name = "TMS470R1A256"; - - if (bank->base >= 0x00040000) - { - LOG_ERROR("No %s flash bank contains base address 0x%08" PRIx32 ".", part_name, bank->base); - return ERROR_FLASH_OPERATION_FAILED; - } - tms470_info->ordinal = 0; - bank->base = 0x00000000; - bank->size = 256 * 1024; - bank->num_sectors = TMS470R1A256_NUM_SECTORS; - bank->sectors = malloc(sizeof(TMS470R1A256_SECTORS)); - if (!bank->sectors) - { - return ERROR_FLASH_OPERATION_FAILED; - } - (void)memcpy(bank->sectors, TMS470R1A256_SECTORS, sizeof(TMS470R1A256_SECTORS)); - break; - - case 0x2b: - part_name = "TMS470R1A288"; - - if (bank->base < 0x00008000) - { - tms470_info->ordinal = 0; - bank->base = 0x00000000; - bank->size = 32 * 1024; - bank->num_sectors = TMS470R1A288_BANK0_NUM_SECTORS; - bank->sectors = malloc(sizeof(TMS470R1A288_BANK0_SECTORS)); - if (!bank->sectors) - { - return ERROR_FLASH_OPERATION_FAILED; - } - (void)memcpy(bank->sectors, TMS470R1A288_BANK0_SECTORS, sizeof(TMS470R1A288_BANK0_SECTORS)); - } - else if ((bank->base >= 0x00040000) && (bank->base < 0x00080000)) - { - tms470_info->ordinal = 1; - bank->base = 0x00040000; - bank->size = 256 * 1024; - bank->num_sectors = TMS470R1A288_BANK1_NUM_SECTORS; - bank->sectors = malloc(sizeof(TMS470R1A288_BANK1_SECTORS)); - if (!bank->sectors) - { + switch (part_number) { + case 0x0a: + part_name = "TMS470R1A256"; + + if (bank->base >= 0x00040000) { + LOG_ERROR("No %s flash bank contains base address 0x%08" PRIx32 ".", + part_name, + bank->base); return ERROR_FLASH_OPERATION_FAILED; } - (void)memcpy(bank->sectors, TMS470R1A288_BANK1_SECTORS, sizeof(TMS470R1A288_BANK1_SECTORS)); - } - else - { - LOG_ERROR("No %s flash bank contains base address 0x%08" PRIx32 ".", part_name, bank->base); - return ERROR_FLASH_OPERATION_FAILED; - } - break; - - case 0x2d: - part_name = "TMS470R1A384"; - - if (bank->base < 0x00020000) - { tms470_info->ordinal = 0; bank->base = 0x00000000; - bank->size = 128 * 1024; - bank->num_sectors = TMS470R1A384_BANK0_NUM_SECTORS; - bank->sectors = malloc(sizeof(TMS470R1A384_BANK0_SECTORS)); + bank->size = 256 * 1024; + bank->num_sectors = TMS470R1A256_NUM_SECTORS; + bank->sectors = malloc(sizeof(TMS470R1A256_SECTORS)); if (!bank->sectors) - { return ERROR_FLASH_OPERATION_FAILED; - } - (void)memcpy(bank->sectors, TMS470R1A384_BANK0_SECTORS, sizeof(TMS470R1A384_BANK0_SECTORS)); - } - else if ((bank->base >= 0x00020000) && (bank->base < 0x00040000)) - { - tms470_info->ordinal = 1; - bank->base = 0x00020000; - bank->size = 128 * 1024; - bank->num_sectors = TMS470R1A384_BANK1_NUM_SECTORS; - bank->sectors = malloc(sizeof(TMS470R1A384_BANK1_SECTORS)); - if (!bank->sectors) - { + (void)memcpy(bank->sectors, TMS470R1A256_SECTORS, sizeof(TMS470R1A256_SECTORS)); + break; + + case 0x2b: + part_name = "TMS470R1A288"; + + if (bank->base < 0x00008000) { + tms470_info->ordinal = 0; + bank->base = 0x00000000; + bank->size = 32 * 1024; + bank->num_sectors = TMS470R1A288_BANK0_NUM_SECTORS; + bank->sectors = malloc(sizeof(TMS470R1A288_BANK0_SECTORS)); + if (!bank->sectors) + return ERROR_FLASH_OPERATION_FAILED; + (void)memcpy(bank->sectors, TMS470R1A288_BANK0_SECTORS, + sizeof(TMS470R1A288_BANK0_SECTORS)); + } else if ((bank->base >= 0x00040000) && (bank->base < 0x00080000)) { + tms470_info->ordinal = 1; + bank->base = 0x00040000; + bank->size = 256 * 1024; + bank->num_sectors = TMS470R1A288_BANK1_NUM_SECTORS; + bank->sectors = malloc(sizeof(TMS470R1A288_BANK1_SECTORS)); + if (!bank->sectors) + return ERROR_FLASH_OPERATION_FAILED; + (void)memcpy(bank->sectors, TMS470R1A288_BANK1_SECTORS, + sizeof(TMS470R1A288_BANK1_SECTORS)); + } else { + LOG_ERROR("No %s flash bank contains base address 0x%08" PRIx32 ".", + part_name, bank->base); return ERROR_FLASH_OPERATION_FAILED; } - (void)memcpy(bank->sectors, TMS470R1A384_BANK1_SECTORS, sizeof(TMS470R1A384_BANK1_SECTORS)); - } - else if ((bank->base >= 0x00040000) && (bank->base < 0x00060000)) - { - tms470_info->ordinal = 2; - bank->base = 0x00040000; - bank->size = 128 * 1024; - bank->num_sectors = TMS470R1A384_BANK2_NUM_SECTORS; - bank->sectors = malloc(sizeof(TMS470R1A384_BANK2_SECTORS)); - if (!bank->sectors) - { + break; + + case 0x2d: + part_name = "TMS470R1A384"; + + if (bank->base < 0x00020000) { + tms470_info->ordinal = 0; + bank->base = 0x00000000; + bank->size = 128 * 1024; + bank->num_sectors = TMS470R1A384_BANK0_NUM_SECTORS; + bank->sectors = malloc(sizeof(TMS470R1A384_BANK0_SECTORS)); + if (!bank->sectors) + return ERROR_FLASH_OPERATION_FAILED; + (void)memcpy(bank->sectors, TMS470R1A384_BANK0_SECTORS, + sizeof(TMS470R1A384_BANK0_SECTORS)); + } else if ((bank->base >= 0x00020000) && (bank->base < 0x00040000)) { + tms470_info->ordinal = 1; + bank->base = 0x00020000; + bank->size = 128 * 1024; + bank->num_sectors = TMS470R1A384_BANK1_NUM_SECTORS; + bank->sectors = malloc(sizeof(TMS470R1A384_BANK1_SECTORS)); + if (!bank->sectors) + return ERROR_FLASH_OPERATION_FAILED; + (void)memcpy(bank->sectors, TMS470R1A384_BANK1_SECTORS, + sizeof(TMS470R1A384_BANK1_SECTORS)); + } else if ((bank->base >= 0x00040000) && (bank->base < 0x00060000)) { + tms470_info->ordinal = 2; + bank->base = 0x00040000; + bank->size = 128 * 1024; + bank->num_sectors = TMS470R1A384_BANK2_NUM_SECTORS; + bank->sectors = malloc(sizeof(TMS470R1A384_BANK2_SECTORS)); + if (!bank->sectors) + return ERROR_FLASH_OPERATION_FAILED; + (void)memcpy(bank->sectors, TMS470R1A384_BANK2_SECTORS, + sizeof(TMS470R1A384_BANK2_SECTORS)); + } else { + LOG_ERROR("No %s flash bank contains base address 0x%08" PRIx32 ".", + part_name, bank->base); return ERROR_FLASH_OPERATION_FAILED; } - (void)memcpy(bank->sectors, TMS470R1A384_BANK2_SECTORS, sizeof(TMS470R1A384_BANK2_SECTORS)); - } - else - { - LOG_ERROR("No %s flash bank contains base address 0x%08" PRIx32 ".", part_name, bank->base); - return ERROR_FLASH_OPERATION_FAILED; - } - break; + break; - default: - LOG_WARNING("Could not identify part 0x%02x as a member of the TMS470 family.", (unsigned)part_number); - return ERROR_FLASH_OPERATION_FAILED; + default: + LOG_WARNING("Could not identify part 0x%02x as a member of the TMS470 family.", + (unsigned)part_number); + return ERROR_FLASH_OPERATION_FAILED; } /* turn off memory selects */ @@ -284,10 +265,10 @@ static int tms470_read_part_info(struct flash_bank *bank) bank->bus_width = 32; LOG_INFO("Identified %s, ver=%d, core=%s, nvmem=%s.", - part_name, - (int)(silicon_version), - (technology_family ? "1.8v" : "3.3v"), - (rom_flash ? "rom" : "flash")); + part_name, + (int)(silicon_version), + (technology_family ? "1.8v" : "3.3v"), + (rom_flash ? "rom" : "flash")); tms470_info->device_ident_reg = device_ident_reg; tms470_info->silicon_version = silicon_version; @@ -306,67 +287,57 @@ static int tms470_read_part_info(struct flash_bank *bank) /* ---------------------------------------------------------------------- */ -static uint32_t keysSet = 0; +static uint32_t keysSet; static uint32_t flashKeys[4]; COMMAND_HANDLER(tms470_handle_flash_keyset_command) { if (CMD_ARGC > 4) - { return ERROR_COMMAND_SYNTAX_ERROR; - } - else if (CMD_ARGC == 4) - { + else if (CMD_ARGC == 4) { int i; - for (i = 0; i < 4; i++) - { + for (i = 0; i < 4; i++) { int start = (0 == strncmp(CMD_ARGV[i], "0x", 2)) ? 2 : 0; - if (1 != sscanf(&CMD_ARGV[i][start], "%" SCNx32 "", &flashKeys[i])) - { - command_print(CMD_CTX, "could not process flash key %s", CMD_ARGV[i]); + if (1 != sscanf(&CMD_ARGV[i][start], "%" SCNx32 "", &flashKeys[i])) { + command_print(CMD_CTX, "could not process flash key %s", + CMD_ARGV[i]); LOG_ERROR("could not process flash key %s", CMD_ARGV[i]); return ERROR_COMMAND_SYNTAX_ERROR; } } keysSet = 1; - } - else if (CMD_ARGC != 0) - { + } else if (CMD_ARGC != 0) { command_print(CMD_CTX, "tms470 flash_keyset "); return ERROR_COMMAND_SYNTAX_ERROR; } - if (keysSet) - { - command_print(CMD_CTX, "using flash keys 0x%08" PRIx32 ", 0x%08" PRIx32 ", 0x%08" PRIx32 ", 0x%08" PRIx32 "", - flashKeys[0], flashKeys[1], flashKeys[2], flashKeys[3]); - } - else - { + if (keysSet) { + command_print(CMD_CTX, + "using flash keys 0x%08" PRIx32 ", 0x%08" PRIx32 ", 0x%08" PRIx32 ", 0x%08" PRIx32 "", + flashKeys[0], + flashKeys[1], + flashKeys[2], + flashKeys[3]); + } else command_print(CMD_CTX, "flash keys not set"); - } return ERROR_OK; } static const uint32_t FLASH_KEYS_ALL_ONES[] = { 0xFFFFFFFF, 0xFFFFFFFF, - 0xFFFFFFFF, 0xFFFFFFFF, -}; + 0xFFFFFFFF, 0xFFFFFFFF,}; static const uint32_t FLASH_KEYS_ALL_ZEROS[] = { 0x00000000, 0x00000000, - 0x00000000, 0x00000000, -}; + 0x00000000, 0x00000000,}; static const uint32_t FLASH_KEYS_MIX1[] = { 0xf0fff0ff, 0xf0fff0ff, - 0xf0fff0ff, 0xf0fff0ff -}; + 0xf0fff0ff, 0xf0fff0ff}; static const uint32_t FLASH_KEYS_MIX2[] = { 0x0000ffff, 0x0000ffff, - 0x0000ffff, 0x0000ffff -}; + 0x0000ffff, 0x0000ffff}; /* ---------------------------------------------------------------------- */ @@ -375,16 +346,11 @@ static int oscMHz = 12; COMMAND_HANDLER(tms470_handle_osc_megahertz_command) { if (CMD_ARGC > 1) - { return ERROR_COMMAND_SYNTAX_ERROR; - } else if (CMD_ARGC == 1) - { sscanf(CMD_ARGV[0], "%d", &oscMHz); - } - if (oscMHz <= 0) - { + if (oscMHz <= 0) { LOG_ERROR("osc_megahertz must be positive and non-zero!"); command_print(CMD_CTX, "osc_megahertz must be positive and non-zero!"); oscMHz = 12; @@ -398,16 +364,13 @@ COMMAND_HANDLER(tms470_handle_osc_megahertz_command) /* ---------------------------------------------------------------------- */ -static int plldis = 0; +static int plldis; COMMAND_HANDLER(tms470_handle_plldis_command) { if (CMD_ARGC > 1) - { return ERROR_COMMAND_SYNTAX_ERROR; - } - else if (CMD_ARGC == 1) - { + else if (CMD_ARGC == 1) { sscanf(CMD_ARGV[0], "%d", &plldis); plldis = plldis ? 1 : 0; } @@ -419,18 +382,20 @@ COMMAND_HANDLER(tms470_handle_plldis_command) /* ---------------------------------------------------------------------- */ -static int tms470_check_flash_unlocked(struct target * target) +static int tms470_check_flash_unlocked(struct target *target) { uint32_t fmbbusy; target_read_u32(target, 0xFFE89C08, &fmbbusy); - LOG_INFO("tms470 fmbbusy = 0x%08" PRIx32 " -> %s", fmbbusy, fmbbusy & 0x8000 ? "unlocked" : "LOCKED"); + LOG_INFO("tms470 fmbbusy = 0x%08" PRIx32 " -> %s", + fmbbusy, + fmbbusy & 0x8000 ? "unlocked" : "LOCKED"); return fmbbusy & 0x8000 ? ERROR_OK : ERROR_FLASH_OPERATION_FAILED; } /* ---------------------------------------------------------------------- */ -static int tms470_try_flash_keys(struct target * target, const uint32_t * key_set) +static int tms470_try_flash_keys(struct target *target, const uint32_t *key_set) { uint32_t glbctrl, fmmstat; int retval = ERROR_FLASH_OPERATION_FAILED; @@ -441,20 +406,17 @@ static int tms470_try_flash_keys(struct target * target, const uint32_t * key_se /* only perform the key match when 3VSTAT is clear */ target_read_u32(target, 0xFFE8BC0C, &fmmstat); - if (!(fmmstat & 0x08)) - { + if (!(fmmstat & 0x08)) { unsigned i; uint32_t fmbptr, fmbac2, orig_fmregopt; target_write_u32(target, 0xFFE8BC04, fmmstat & ~0x07); /* wait for pump ready */ - do - { + do { target_read_u32(target, 0xFFE8A814, &fmbptr); alive_sleep(1); - } - while (!(fmbptr & 0x0200)); + } while (!(fmbptr & 0x0200)); /* force max wait states */ target_read_u32(target, 0xFFE88004, &fmbac2); @@ -464,8 +426,7 @@ static int tms470_try_flash_keys(struct target * target, const uint32_t * key_se target_read_u32(target, 0xFFE89C00, &orig_fmregopt); target_write_u32(target, 0xFFE89C00, 0x00); - for (i = 0; i < 4; i++) - { + for (i = 0; i < 4; i++) { uint32_t tmp; /* There is no point displaying the value of tmp, it is @@ -478,15 +439,13 @@ static int tms470_try_flash_keys(struct target * target, const uint32_t * key_se target_write_u32(target, 0xFFE89C0C, key_set[i]); } - if (ERROR_OK == tms470_check_flash_unlocked(target)) - { + if (ERROR_OK == tms470_check_flash_unlocked(target)) { /* * There seems to be a side-effect of reading the FMPKEY * register in that it re-enables the protection. So we * re-enable it. */ - for (i = 0; i < 4; i++) - { + for (i = 0; i < 4; i++) { uint32_t tmp; target_read_u32(target, 0x00001FF0 + 4 * i, &tmp); @@ -514,17 +473,14 @@ static int tms470_unlock_flash(struct flash_bank *bank) const uint32_t *p_key_sets[5]; unsigned i, key_set_count; - if (keysSet) - { + if (keysSet) { key_set_count = 5; p_key_sets[0] = flashKeys; p_key_sets[1] = FLASH_KEYS_ALL_ONES; p_key_sets[2] = FLASH_KEYS_ALL_ZEROS; p_key_sets[3] = FLASH_KEYS_MIX1; p_key_sets[4] = FLASH_KEYS_MIX2; - } - else - { + } else { key_set_count = 4; p_key_sets[0] = FLASH_KEYS_ALL_ONES; p_key_sets[1] = FLASH_KEYS_ALL_ZEROS; @@ -532,10 +488,8 @@ static int tms470_unlock_flash(struct flash_bank *bank) p_key_sets[3] = FLASH_KEYS_MIX2; } - for (i = 0; i < key_set_count; i++) - { - if (tms470_try_flash_keys(target, p_key_sets[i]) == ERROR_OK) - { + for (i = 0; i < key_set_count; i++) { + if (tms470_try_flash_keys(target, p_key_sets[i]) == ERROR_OK) { LOG_INFO("tms470 flash is unlocked"); return ERROR_OK; } @@ -594,14 +548,11 @@ static int tms470_flash_initialize_internal_state_machine(struct flash_bank *ban * configure VHV */ target_read_u32(target, 0xFFE8A080, &fmmaxep); - if (fmmaxep == 0xf000) - { + if (fmmaxep == 0xf000) { fmmaxep = 0xf000 + 4095; target_write_u32(target, 0xFFE8A80C, 0x9964); LOG_DEBUG("set fmptr3 = 0x9964"); - } - else - { + } else { fmmaxep = 0xa000 + 4095; target_write_u32(target, 0xFFE8A80C, 0x9b64); LOG_DEBUG("set fmptr3 = 0x9b64"); @@ -692,44 +643,37 @@ static int tms470_flash_status(struct flash_bank *bank) target_read_u32(target, 0xFFE8BC0C, &fmmstat); LOG_DEBUG("set fmmstat = 0x%04" PRIx32 "", fmmstat); - if (fmmstat & 0x0080) - { + if (fmmstat & 0x0080) { LOG_WARNING("tms470 flash command: erase still active after busy clear."); result = ERROR_FLASH_OPERATION_FAILED; } - if (fmmstat & 0x0040) - { + if (fmmstat & 0x0040) { LOG_WARNING("tms470 flash command: program still active after busy clear."); result = ERROR_FLASH_OPERATION_FAILED; } - if (fmmstat & 0x0020) - { + if (fmmstat & 0x0020) { LOG_WARNING("tms470 flash command: invalid data command."); result = ERROR_FLASH_OPERATION_FAILED; } - if (fmmstat & 0x0010) - { + if (fmmstat & 0x0010) { LOG_WARNING("tms470 flash command: program, erase or validate sector failed."); result = ERROR_FLASH_OPERATION_FAILED; } - if (fmmstat & 0x0008) - { + if (fmmstat & 0x0008) { LOG_WARNING("tms470 flash command: voltage instability detected."); result = ERROR_FLASH_OPERATION_FAILED; } - if (fmmstat & 0x0006) - { + if (fmmstat & 0x0006) { LOG_WARNING("tms470 flash command: command suspend detected."); result = ERROR_FLASH_OPERATION_FAILED; } - if (fmmstat & 0x0001) - { + if (fmmstat & 0x0001) { LOG_WARNING("tms470 flash command: sector was locked."); result = ERROR_FLASH_OPERATION_FAILED; } @@ -765,14 +709,11 @@ static int tms470_erase_sector(struct flash_bank *bank, int sector) * Select one or more bits in FMBSEA or FMBSEB to disable Level 1 * protection for the particular sector to be erased/written. */ - if (sector < 16) - { + if (sector < 16) { target_read_u32(target, 0xFFE88008, &fmbsea); target_write_u32(target, 0xFFE88008, fmbsea | (1 << sector)); LOG_DEBUG("set fmbsea = 0x%04" PRIx32 "", fmbsea | (1 << sector)); - } - else - { + } else { target_read_u32(target, 0xFFE8800C, &fmbseb); target_write_u32(target, 0xFFE8800C, fmbseb | (1 << (sector - 16))); LOG_DEBUG("set fmbseb = 0x%04" PRIx32 "", fmbseb | (1 << (sector - 16))); @@ -793,26 +734,19 @@ static int tms470_erase_sector(struct flash_bank *bank, int sector) * Monitor FMMSTAT, busy until clear, then check and other flags for * ultimate result of the operation. */ - do - { + do { target_read_u32(target, 0xFFE8BC0C, &fmmstat); if (fmmstat & 0x0100) - { alive_sleep(1); - } - } - while (fmmstat & 0x0100); + } while (fmmstat & 0x0100); result = tms470_flash_status(bank); - if (sector < 16) - { + if (sector < 16) { target_write_u32(target, 0xFFE88008, fmbsea); LOG_DEBUG("set fmbsea = 0x%04" PRIx32 "", fmbsea); bank->sectors[sector].is_protected = fmbsea & (1 << sector) ? 0 : 1; - } - else - { + } else { target_write_u32(target, 0xFFE8800C, fmbseb); LOG_DEBUG("set fmbseb = 0x%04" PRIx32 "", fmbseb); bank->sectors[sector].is_protected = fmbseb & (1 << (sector - 16)) ? 0 : 1; @@ -823,16 +757,14 @@ static int tms470_erase_sector(struct flash_bank *bank, int sector) LOG_DEBUG("set glbctrl = 0x%08" PRIx32 "", glbctrl); if (result == ERROR_OK) - { bank->sectors[sector].is_erased = 1; - } return result; } -/* ---------------------------------------------------------------------- - Implementation of Flash Driver Interfaces - ---------------------------------------------------------------------- */ +/*---------------------------------------------------------------------- + * Implementation of Flash Driver Interfaces + *---------------------------------------------------------------------- */ static const struct command_registration tms470_any_command_handlers[] = { { @@ -876,41 +808,33 @@ static int tms470_erase(struct flash_bank *bank, int first, int last) struct tms470_flash_bank *tms470_info = bank->driver_priv; int sector, result = ERROR_OK; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } tms470_read_part_info(bank); - if ((first < 0) || (first >= bank->num_sectors) || (last < 0) || (last >= bank->num_sectors) || (first > last)) - { + if ((first < 0) || (first >= bank->num_sectors) || (last < 0) || + (last >= bank->num_sectors) || (first > last)) { LOG_ERROR("Sector range %d to %d invalid.", first, last); return ERROR_FLASH_SECTOR_INVALID; } result = tms470_unlock_flash(bank); if (result != ERROR_OK) - { return result; - } - for (sector = first; sector <= last; sector++) - { + for (sector = first; sector <= last; sector++) { LOG_INFO("Erasing tms470 bank %d sector %d...", tms470_info->ordinal, sector); result = tms470_erase_sector(bank, sector); - if (result != ERROR_OK) - { + if (result != ERROR_OK) { LOG_ERROR("tms470 could not erase flash sector."); break; - } - else - { + } else LOG_INFO("sector erased successfully."); - } } return result; @@ -925,16 +849,15 @@ static int tms470_protect(struct flash_bank *bank, int set, int first, int last) uint32_t fmmac2, fmbsea, fmbseb; int sector; - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } tms470_read_part_info(bank); - if ((first < 0) || (first >= bank->num_sectors) || (last < 0) || (last >= bank->num_sectors) || (first > last)) - { + if ((first < 0) || (first >= bank->num_sectors) || (last < 0) || + (last >= bank->num_sectors) || (first > last)) { LOG_ERROR("Sector range %d to %d invalid.", first, last); return ERROR_FLASH_SECTOR_INVALID; } @@ -947,16 +870,13 @@ static int tms470_protect(struct flash_bank *bank, int set, int first, int last) target_read_u32(target, 0xFFE88008, &fmbsea); target_read_u32(target, 0xFFE8800C, &fmbseb); - for (sector = 0; sector < bank->num_sectors; sector++) - { - if (sector < 16) - { + for (sector = 0; sector < bank->num_sectors; sector++) { + if (sector < 16) { fmbsea = set ? fmbsea & ~(1 << sector) : fmbsea | (1 << sector); bank->sectors[sector].is_protected = set ? 1 : 0; - } - else - { - fmbseb = set ? fmbseb & ~(1 << (sector - 16)) : fmbseb | (1 << (sector - 16)); + } else { + fmbseb = set ? fmbseb & + ~(1 << (sector - 16)) : fmbseb | (1 << (sector - 16)); bank->sectors[sector].is_protected = set ? 1 : 0; } } @@ -970,22 +890,22 @@ static int tms470_protect(struct flash_bank *bank, int set, int first, int last) /* ---------------------------------------------------------------------- */ -static int tms470_write(struct flash_bank *bank, uint8_t * buffer, uint32_t offset, uint32_t count) +static int tms470_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, uint32_t count) { struct target *target = bank->target; uint32_t glbctrl, fmbac2, orig_fmregopt, fmbsea, fmbseb, fmmaxpp, fmmstat; int result = ERROR_OK; uint32_t i; - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } tms470_read_part_info(bank); - LOG_INFO("Writing %" PRId32 " bytes starting at 0x%08" PRIx32 "", count, bank->base + offset); + LOG_INFO("Writing %" PRId32 " bytes starting at 0x%08" PRIx32 "", count, bank->base + + offset); /* set GLBCTRL.4 */ target_read_u32(target, 0xFFFFFFDC, &glbctrl); @@ -1012,13 +932,11 @@ static int tms470_write(struct flash_bank *bank, uint8_t * buffer, uint32_t offs /* read MAXPP */ target_read_u32(target, 0xFFE8A07C, &fmmaxpp); - for (i = 0; i < count; i += 2) - { + for (i = 0; i < count; i += 2) { uint32_t addr = bank->base + offset + i; uint16_t word = (((uint16_t) buffer[i]) << 8) | (uint16_t) buffer[i + 1]; - if (word != 0xffff) - { + if (word != 0xffff) { LOG_INFO("writing 0x%04x at 0x%08" PRIx32 "", word, addr); /* clear status register */ @@ -1032,28 +950,23 @@ static int tms470_write(struct flash_bank *bank, uint8_t * buffer, uint32_t offs * Monitor FMMSTAT, busy until clear, then check and other flags * for ultimate result of the operation. */ - do - { + do { target_read_u32(target, 0xFFE8BC0C, &fmmstat); if (fmmstat & 0x0100) - { alive_sleep(1); - } - } - while (fmmstat & 0x0100); + } while (fmmstat & 0x0100); - if (fmmstat & 0x3ff) - { + if (fmmstat & 0x3ff) { LOG_ERROR("fmstat = 0x%04" PRIx32 "", fmmstat); - LOG_ERROR("Could not program word 0x%04x at address 0x%08" PRIx32 ".", word, addr); + LOG_ERROR( + "Could not program word 0x%04x at address 0x%08" PRIx32 ".", + word, + addr); result = ERROR_FLASH_OPERATION_FAILED; break; } - } - else - { + } else LOG_INFO("skipping 0xffff at 0x%08" PRIx32 "", addr); - } } /* restore */ @@ -1070,8 +983,7 @@ static int tms470_write(struct flash_bank *bank, uint8_t * buffer, uint32_t offs static int tms470_probe(struct flash_bank *bank) { - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_WARNING("Cannot communicate... target not halted."); return ERROR_TARGET_NOT_HALTED; } @@ -1098,16 +1010,13 @@ static int tms470_erase_check(struct flash_bank *bank) uint32_t fmmac2, fmbac2, glbctrl, orig_fmregopt; static uint8_t buffer[64 * 1024]; - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } if (!tms470_info->device_ident_reg) - { tms470_read_part_info(bank); - } /* set GLBCTRL.4 */ target_read_u32(target, 0xFFFFFFDC, &glbctrl); @@ -1136,10 +1045,8 @@ static int tms470_erase_check(struct flash_bank *bank) * word at a time. Here we read an entire sector and inspect it in * an attempt to reduce the JTAG overhead. */ - for (sector = 0; sector < bank->num_sectors; sector++) - { - if (bank->sectors[sector].is_erased != 1) - { + for (sector = 0; sector < bank->num_sectors; sector++) { + if (bank->sectors[sector].is_erased != 1) { uint32_t i, addr = bank->base + bank->sectors[sector].offset; LOG_INFO("checking flash bank %d sector %d", tms470_info->ordinal, sector); @@ -1147,27 +1054,26 @@ static int tms470_erase_check(struct flash_bank *bank) target_read_buffer(target, addr, bank->sectors[sector].size, buffer); bank->sectors[sector].is_erased = 1; - for (i = 0; i < bank->sectors[sector].size; i++) - { - if (buffer[i] != 0xff) - { - LOG_WARNING("tms470 bank %d, sector %d, not erased.", tms470_info->ordinal, sector); - LOG_WARNING("at location 0x%08" PRIx32 ": flash data is 0x%02x.", addr + i, buffer[i]); + for (i = 0; i < bank->sectors[sector].size; i++) { + if (buffer[i] != 0xff) { + LOG_WARNING("tms470 bank %d, sector %d, not erased.", + tms470_info->ordinal, + sector); + LOG_WARNING( + "at location 0x%08" PRIx32 ": flash data is 0x%02x.", + addr + i, + buffer[i]); bank->sectors[sector].is_erased = 0; break; } } } - if (bank->sectors[sector].is_erased != 1) - { + if (bank->sectors[sector].is_erased != 1) { result = ERROR_FLASH_SECTOR_NOT_ERASED; break; - } - else - { + } else LOG_INFO("sector erased"); - } } /* reset TEZ, wait states, read mode, GLBCTRL.4 */ @@ -1188,16 +1094,13 @@ static int tms470_protect_check(struct flash_bank *bank) int sector, result = ERROR_OK; uint32_t fmmac2, fmbsea, fmbseb; - if (target->state != TARGET_HALTED) - { + if (target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } if (!tms470_info->device_ident_reg) - { tms470_read_part_info(bank); - } /* enable the appropriate bank */ target_read_u32(target, 0xFFE8BC04, &fmmac2); @@ -1206,22 +1109,21 @@ static int tms470_protect_check(struct flash_bank *bank) target_read_u32(target, 0xFFE88008, &fmbsea); target_read_u32(target, 0xFFE8800C, &fmbseb); - for (sector = 0; sector < bank->num_sectors; sector++) - { + for (sector = 0; sector < bank->num_sectors; sector++) { int protected; - if (sector < 16) - { + if (sector < 16) { protected = fmbsea & (1 << sector) ? 0 : 1; bank->sectors[sector].is_protected = protected; - } - else - { + } else { protected = fmbseb & (1 << (sector - 16)) ? 0 : 1; bank->sectors[sector].is_protected = protected; } - LOG_DEBUG("bank %d sector %d is %s", tms470_info->ordinal, sector, protected ? "protected" : "not protected"); + LOG_DEBUG("bank %d sector %d is %s", + tms470_info->ordinal, + sector, + protected ? "protected" : "not protected"); } return result; @@ -1235,21 +1137,21 @@ static int get_tms470_info(struct flash_bank *bank, char *buf, int buf_size) struct tms470_flash_bank *tms470_info = bank->driver_priv; if (!tms470_info->device_ident_reg) - { tms470_read_part_info(bank); - } - if (!tms470_info->device_ident_reg) - { + if (!tms470_info->device_ident_reg) { (void)snprintf(buf, buf_size, "Cannot identify target as a TMS470\n"); return ERROR_FLASH_OPERATION_FAILED; } - used = snprintf(buf, buf_size, "\ntms470 information: Chip is %s\n", tms470_info->part_name); + used = + snprintf(buf, buf_size, "\ntms470 information: Chip is %s\n", + tms470_info->part_name); buf += used; buf_size -= used; - snprintf(buf, buf_size, "Flash protection level 2 is %s\n", tms470_check_flash_unlocked(bank->target) == ERROR_OK ? "disabled" : "enabled"); + snprintf(buf, buf_size, "Flash protection level 2 is %s\n", + tms470_check_flash_unlocked(bank->target) == ERROR_OK ? "disabled" : "enabled"); return ERROR_OK; } @@ -1266,9 +1168,7 @@ FLASH_BANK_COMMAND_HANDLER(tms470_flash_bank_command) bank->driver_priv = malloc(sizeof(struct tms470_flash_bank)); if (!bank->driver_priv) - { return ERROR_FLASH_OPERATION_FAILED; - } (void)memset(bank->driver_priv, 0, sizeof(struct tms470_flash_bank)); diff --git a/src/flash/nor/virtual.c b/src/flash/nor/virtual.c index f1e84c29..1280a791 100644 --- a/src/flash/nor/virtual.c +++ b/src/flash/nor/virtual.c @@ -17,20 +17,20 @@ * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ + #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "imp.h" -static struct flash_bank* virtual_get_master_bank(struct flash_bank *bank) +static struct flash_bank *virtual_get_master_bank(struct flash_bank *bank) { - struct flash_bank* master_bank; + struct flash_bank *master_bank; master_bank = get_flash_bank_by_name_noprobe(bank->driver_priv); - if (master_bank == NULL) { - LOG_ERROR("master flash bank '%s' does not exist", (char*)bank->driver_priv); - } + if (master_bank == NULL) + LOG_ERROR("master flash bank '%s' does not exist", (char *)bank->driver_priv); return master_bank; } @@ -39,9 +39,8 @@ static void virtual_update_bank_info(struct flash_bank *bank) { struct flash_bank *master_bank = virtual_get_master_bank(bank); - if (master_bank == NULL) { + if (master_bank == NULL) return; - } /* update the info we do not have */ bank->size = master_bank->size; @@ -54,16 +53,13 @@ static void virtual_update_bank_info(struct flash_bank *bank) FLASH_BANK_COMMAND_HANDLER(virtual_flash_bank_command) { if (CMD_ARGC < 7) - { return ERROR_COMMAND_SYNTAX_ERROR; - } /* get the master flash bank */ const char *bank_name = CMD_ARGV[6]; struct flash_bank *master_bank = get_flash_bank_by_name_noprobe(bank_name); - if (master_bank == NULL) - { + if (master_bank == NULL) { LOG_ERROR("master flash bank '%s' does not exist", bank_name); return ERROR_FLASH_OPERATION_FAILED; } @@ -79,13 +75,12 @@ static int virtual_protect(struct flash_bank *bank, int set, int first, int last struct flash_bank *master_bank = virtual_get_master_bank(bank); int retval; - if (master_bank == NULL) { + if (master_bank == NULL) return ERROR_FLASH_OPERATION_FAILED; - } /* call master handler */ - if ((retval = master_bank->driver->protect(master_bank, set, - first, last)) != ERROR_OK) + retval = master_bank->driver->protect(master_bank, set, first, last); + if (retval != ERROR_OK) return retval; return ERROR_OK; @@ -96,12 +91,12 @@ static int virtual_protect_check(struct flash_bank *bank) struct flash_bank *master_bank = virtual_get_master_bank(bank); int retval; - if (master_bank == NULL) { + if (master_bank == NULL) return ERROR_FLASH_OPERATION_FAILED; - } /* call master handler */ - if ((retval = master_bank->driver->protect_check(master_bank)) != ERROR_OK) + retval = master_bank->driver->protect_check(master_bank); + if (retval != ERROR_OK) return retval; return ERROR_OK; @@ -112,13 +107,12 @@ static int virtual_erase(struct flash_bank *bank, int first, int last) struct flash_bank *master_bank = virtual_get_master_bank(bank); int retval; - if (master_bank == NULL) { + if (master_bank == NULL) return ERROR_FLASH_OPERATION_FAILED; - } /* call master handler */ - if ((retval = master_bank->driver->erase(master_bank, - first, last)) != ERROR_OK) + retval = master_bank->driver->erase(master_bank, first, last); + if (retval != ERROR_OK) return retval; return ERROR_OK; @@ -130,13 +124,12 @@ static int virtual_write(struct flash_bank *bank, uint8_t *buffer, struct flash_bank *master_bank = virtual_get_master_bank(bank); int retval; - if (master_bank == NULL) { + if (master_bank == NULL) return ERROR_FLASH_OPERATION_FAILED; - } /* call master handler */ - if ((retval = master_bank->driver->write(master_bank, buffer, - offset, count)) != ERROR_OK) + retval = master_bank->driver->write(master_bank, buffer, offset, count); + if (retval != ERROR_OK) return retval; return ERROR_OK; @@ -147,12 +140,12 @@ static int virtual_probe(struct flash_bank *bank) struct flash_bank *master_bank = virtual_get_master_bank(bank); int retval; - if (master_bank == NULL) { + if (master_bank == NULL) return ERROR_FLASH_OPERATION_FAILED; - } /* call master handler */ - if ((retval = master_bank->driver->probe(master_bank)) != ERROR_OK) + retval = master_bank->driver->probe(master_bank); + if (retval != ERROR_OK) return retval; /* update the info we do not have */ @@ -166,12 +159,12 @@ static int virtual_auto_probe(struct flash_bank *bank) struct flash_bank *master_bank = virtual_get_master_bank(bank); int retval; - if (master_bank == NULL) { + if (master_bank == NULL) return ERROR_FLASH_OPERATION_FAILED; - } /* call master handler */ - if ((retval = master_bank->driver->auto_probe(master_bank)) != ERROR_OK) + retval = master_bank->driver->auto_probe(master_bank); + if (retval != ERROR_OK) return retval; /* update the info we do not have */ @@ -184,9 +177,8 @@ static int virtual_info(struct flash_bank *bank, char *buf, int buf_size) { struct flash_bank *master_bank = virtual_get_master_bank(bank); - if (master_bank == NULL) { + if (master_bank == NULL) return ERROR_FLASH_OPERATION_FAILED; - } snprintf(buf, buf_size, "%s driver for flash bank %s at 0x%8.8" PRIx32 "", bank->driver->name, master_bank->name, master_bank->base); @@ -199,12 +191,12 @@ static int virtual_blank_check(struct flash_bank *bank) struct flash_bank *master_bank = virtual_get_master_bank(bank); int retval; - if (master_bank == NULL) { + if (master_bank == NULL) return ERROR_FLASH_OPERATION_FAILED; - } /* call master handler */ - if ((retval = master_bank->driver->erase_check(master_bank)) != ERROR_OK) + retval = master_bank->driver->erase_check(master_bank); + if (retval != ERROR_OK) return retval; return ERROR_OK; @@ -216,13 +208,12 @@ static int virtual_flash_read(struct flash_bank *bank, struct flash_bank *master_bank = virtual_get_master_bank(bank); int retval; - if (master_bank == NULL) { + if (master_bank == NULL) return ERROR_FLASH_OPERATION_FAILED; - } /* call master handler */ - if ((retval = master_bank->driver->read(master_bank, buffer, - offset, count)) != ERROR_OK) + retval = master_bank->driver->read(master_bank, buffer, offset, count); + if (retval != ERROR_OK) return retval; return ERROR_OK; -- 2.39.5