From 9fd84915a92058b775fcc8fad4ab4e59fe51cf17 Mon Sep 17 00:00:00 2001 From: John Schmoller Date: Thu, 2 Dec 2010 11:43:10 -0600 Subject: [PATCH] fsl_upm: Add MxMR/MDR synchronization According to Freescale reference manuals (eg section "13.4.4.2 Programming the UPMs" of the P4080 Reference Manual): "Since the result of any update to the MxMR/MDR register must be in effect before the dummy read or write to the UPM region, a write to MxMR/MDR should be followed immediately by a read of MxMR/MDR." The UPM on a custom P4080-based board did not work without performing a read of MxMR/MDR after a write. Signed-off-by: John Schmoller Signed-off-by: Peter Tyser Acked-by: Scott Wood Signed-off-by: Kumar Gala --- drivers/mtd/nand/fsl_upm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c index 7cb99cbc07..c33e2786b2 100644 --- a/drivers/mtd/nand/fsl_upm.c +++ b/drivers/mtd/nand/fsl_upm.c @@ -21,6 +21,7 @@ static void fsl_upm_start_pattern(struct fsl_upm *upm, u32 pat_offset) { clrsetbits_be32(upm->mxmr, MxMR_MAD_MSK, MxMR_OP_RUNP | pat_offset); + (void)in_be32(upm->mxmr); } static void fsl_upm_end_pattern(struct fsl_upm *upm) @@ -35,6 +36,7 @@ static void fsl_upm_run_pattern(struct fsl_upm *upm, int width, void __iomem *io_addr, u32 mar) { out_be32(upm->mar, mar); + (void)in_be32(upm->mar); switch (width) { case 8: out_8(io_addr, 0x0); -- 2.39.5