From a0cfd188762d8f399f4670dfde54e9c6662b16a8 Mon Sep 17 00:00:00 2001 From: Reinhard Meyer Date: Tue, 9 Nov 2010 17:06:20 +0100 Subject: [PATCH] ATMEL: fix dataflash (dirty) this file should be converted to struct SoC access Signed-off-by: Reinhard Meyer --- drivers/spi/atmel_dataflash_spi.c | 94 +++++++++++++++++++------------ include/dataflash.h | 1 - 2 files changed, 57 insertions(+), 38 deletions(-) diff --git a/drivers/spi/atmel_dataflash_spi.c b/drivers/spi/atmel_dataflash_spi.c index 4a5c4aac70..9c991e8cbc 100644 --- a/drivers/spi/atmel_dataflash_spi.c +++ b/drivers/spi/atmel_dataflash_spi.c @@ -21,13 +21,21 @@ #include #ifndef CONFIG_AT91_LEGACY -#define CONFIG_AT91_LEGACY -#warning Please update to use C structur SoC access ! +# define CONFIG_ATMEL_LEGACY +# warning Please update to use C structure SoC access ! #endif -#include +#include +#include +#include + +#include + #include +#include + +#include "atmel_spi.h" + #include -#include #include #include @@ -41,18 +49,18 @@ void AT91F_SpiInit(void) { /* Reset the SPI */ - writel(AT91_SPI_SWRST, AT91_BASE_SPI + AT91_SPI_CR); + writel(AT91_SPI_SWRST, ATMEL_BASE_SPI0 + AT91_SPI_CR); /* Configure SPI in Master Mode with No CS selected !!! */ writel(AT91_SPI_MSTR | AT91_SPI_MODFDIS | AT91_SPI_PCS, - AT91_BASE_SPI + AT91_SPI_MR); + ATMEL_BASE_SPI0 + AT91_SPI_MR); /* Configure CS0 */ writel(AT91_SPI_NCPHA | (AT91_SPI_DLYBS & DATAFLASH_TCSS) | (AT91_SPI_DLYBCT & DATAFLASH_TCHS) | ((get_mck_clk_rate() / AT91_SPI_CLK) << 8), - AT91_BASE_SPI + AT91_SPI_CSR(0)); + ATMEL_BASE_SPI0 + AT91_SPI_CSR(0)); #ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 /* Configure CS1 */ @@ -60,7 +68,7 @@ void AT91F_SpiInit(void) (AT91_SPI_DLYBS & DATAFLASH_TCSS) | (AT91_SPI_DLYBCT & DATAFLASH_TCHS) | ((get_mck_clk_rate() / AT91_SPI_CLK) << 8), - AT91_BASE_SPI + AT91_SPI_CSR(1)); + ATMEL_BASE_SPI0 + AT91_SPI_CSR(1)); #endif #ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS2 /* Configure CS2 */ @@ -68,7 +76,7 @@ void AT91F_SpiInit(void) (AT91_SPI_DLYBS & DATAFLASH_TCSS) | (AT91_SPI_DLYBCT & DATAFLASH_TCHS) | ((get_mck_clk_rate() / AT91_SPI_CLK) << 8), - AT91_BASE_SPI + AT91_SPI_CSR(2)); + ATMEL_BASE_SPI0 + AT91_SPI_CSR(2)); #endif #ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 /* Configure CS3 */ @@ -76,21 +84,22 @@ void AT91F_SpiInit(void) (AT91_SPI_DLYBS & DATAFLASH_TCSS) | (AT91_SPI_DLYBCT & DATAFLASH_TCHS) | ((get_mck_clk_rate() / AT91_SPI_CLK) << 8), - AT91_BASE_SPI + AT91_SPI_CSR(3)); + ATMEL_BASE_SPI0 + AT91_SPI_CSR(3)); #endif /* SPI_Enable */ - writel(AT91_SPI_SPIEN, AT91_BASE_SPI + AT91_SPI_CR); + writel(AT91_SPI_SPIEN, ATMEL_BASE_SPI0 + AT91_SPI_CR); - while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_SPIENS)); + while (!(readl(ATMEL_BASE_SPI0 + AT91_SPI_SR) & AT91_SPI_SPIENS)) + ; /* * Add tempo to get SPI in a safe state. * Should not be needed for new silicon (Rev B) */ udelay(500000); - readl(AT91_BASE_SPI + AT91_SPI_SR); - readl(AT91_BASE_SPI + AT91_SPI_RDR); + readl(ATMEL_BASE_SPI0 + AT91_SPI_SR); + readl(ATMEL_BASE_SPI0 + AT91_SPI_RDR); } @@ -100,33 +109,33 @@ void AT91F_SpiEnable(int cs) switch (cs) { case 0: /* Configure SPI CS0 for Serial DataFlash AT45DBxx */ - mode = readl(AT91_BASE_SPI + AT91_SPI_MR); + mode = readl(ATMEL_BASE_SPI0 + AT91_SPI_MR); mode &= 0xFFF0FFFF; writel(mode | ((AT91_SPI_PCS0_DATAFLASH_CARD<<16) & AT91_SPI_PCS), - AT91_BASE_SPI + AT91_SPI_MR); + ATMEL_BASE_SPI0 + AT91_SPI_MR); break; case 1: /* Configure SPI CS1 for Serial DataFlash AT45DBxx */ - mode = readl(AT91_BASE_SPI + AT91_SPI_MR); + mode = readl(ATMEL_BASE_SPI0 + AT91_SPI_MR); mode &= 0xFFF0FFFF; writel(mode | ((AT91_SPI_PCS1_DATAFLASH_CARD<<16) & AT91_SPI_PCS), - AT91_BASE_SPI + AT91_SPI_MR); + ATMEL_BASE_SPI0 + AT91_SPI_MR); break; case 2: /* Configure SPI CS2 for Serial DataFlash AT45DBxx */ - mode = readl(AT91_BASE_SPI + AT91_SPI_MR); + mode = readl(ATMEL_BASE_SPI0 + AT91_SPI_MR); mode &= 0xFFF0FFFF; writel(mode | ((AT91_SPI_PCS2_DATAFLASH_CARD<<16) & AT91_SPI_PCS), - AT91_BASE_SPI + AT91_SPI_MR); + ATMEL_BASE_SPI0 + AT91_SPI_MR); break; case 3: - mode = readl(AT91_BASE_SPI + AT91_SPI_MR); + mode = readl(ATMEL_BASE_SPI0 + AT91_SPI_MR); mode &= 0xFFF0FFFF; writel(mode | ((AT91_SPI_PCS3_DATAFLASH_CARD<<16) & AT91_SPI_PCS), - AT91_BASE_SPI + AT91_SPI_MR); + ATMEL_BASE_SPI0 + AT91_SPI_MR); break; } /* SPI_Enable */ - writel(AT91_SPI_SPIEN, AT91_BASE_SPI + AT91_SPI_CR); + writel(AT91_SPI_SPIEN, ATMEL_BASE_SPI0 + AT91_SPI_CR); } unsigned int AT91F_SpiWrite1(AT91PS_DataflashDesc pDesc); @@ -134,37 +143,48 @@ unsigned int AT91F_SpiWrite1(AT91PS_DataflashDesc pDesc); unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc) { unsigned int timeout; + unsigned int timebase; pDesc->state = BUSY; - writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR); + writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, + ATMEL_BASE_SPI0 + AT91_SPI_PTCR); /* Initialize the Transmit and Receive Pointer */ - writel((unsigned int)pDesc->rx_cmd_pt, AT91_BASE_SPI + AT91_SPI_RPR); - writel((unsigned int)pDesc->tx_cmd_pt, AT91_BASE_SPI + AT91_SPI_TPR); + writel((unsigned int)pDesc->rx_cmd_pt, + ATMEL_BASE_SPI0 + AT91_SPI_RPR); + writel((unsigned int)pDesc->tx_cmd_pt, + ATMEL_BASE_SPI0 + AT91_SPI_TPR); /* Intialize the Transmit and Receive Counters */ - writel(pDesc->rx_cmd_size, AT91_BASE_SPI + AT91_SPI_RCR); - writel(pDesc->tx_cmd_size, AT91_BASE_SPI + AT91_SPI_TCR); + writel(pDesc->rx_cmd_size, ATMEL_BASE_SPI0 + AT91_SPI_RCR); + writel(pDesc->tx_cmd_size, ATMEL_BASE_SPI0 + AT91_SPI_TCR); if (pDesc->tx_data_size != 0) { /* Initialize the Next Transmit and Next Receive Pointer */ - writel((unsigned int)pDesc->rx_data_pt, AT91_BASE_SPI + AT91_SPI_RNPR); - writel((unsigned int)pDesc->tx_data_pt, AT91_BASE_SPI + AT91_SPI_TNPR); + writel((unsigned int)pDesc->rx_data_pt, + ATMEL_BASE_SPI0 + AT91_SPI_RNPR); + writel((unsigned int)pDesc->tx_data_pt, + ATMEL_BASE_SPI0 + AT91_SPI_TNPR); /* Intialize the Next Transmit and Next Receive Counters */ - writel(pDesc->rx_data_size, AT91_BASE_SPI + AT91_SPI_RNCR); - writel(pDesc->tx_data_size, AT91_BASE_SPI + AT91_SPI_TNCR); + writel(pDesc->rx_data_size, + ATMEL_BASE_SPI0 + AT91_SPI_RNCR); + writel(pDesc->tx_data_size, + ATMEL_BASE_SPI0 + AT91_SPI_TNCR); } /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + timebase = get_timer(0); timeout = 0; - writel(AT91_SPI_TXTEN + AT91_SPI_RXTEN, AT91_BASE_SPI + AT91_SPI_PTCR); - while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_RXBUFF) && - ((timeout = get_timer_masked()) < CONFIG_SYS_SPI_WRITE_TOUT)); - writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR); + writel(AT91_SPI_TXTEN + AT91_SPI_RXTEN, + ATMEL_BASE_SPI0 + AT91_SPI_PTCR); + while (!(readl(ATMEL_BASE_SPI0 + AT91_SPI_SR) & AT91_SPI_RXBUFF) && + ((timeout = get_timer(timebase)) < CONFIG_SYS_SPI_WRITE_TOUT)) + ; + writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, + ATMEL_BASE_SPI0 + AT91_SPI_PTCR); pDesc->state = IDLE; if (timeout >= CONFIG_SYS_SPI_WRITE_TOUT) { diff --git a/include/dataflash.h b/include/dataflash.h index 63b3bf9634..96ac0975a6 100644 --- a/include/dataflash.h +++ b/include/dataflash.h @@ -34,7 +34,6 @@ #define _DataFlash_h -#include #include "config.h" /*number of protected area*/ -- 2.39.5