From a17adf0601f66617f2203c6d4db168a8e8c55055 Mon Sep 17 00:00:00 2001 From: Ash Charles Date: Fri, 30 Sep 2011 16:17:21 -0700 Subject: [PATCH] Verdex: Add support for Gumstix Verdex boards. Gumstix Verdex is a PXA270-based series of computer-on-modules. This configuration file is based off the voipac.cfg configuration with a different flash memory configuration. This has been tested flyswatter adapter to reflash a Gumstix Verdex XL6P board. --- tcl/board/verdex.cfg | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 tcl/board/verdex.cfg diff --git a/tcl/board/verdex.cfg b/tcl/board/verdex.cfg new file mode 100644 index 00000000..6da98752 --- /dev/null +++ b/tcl/board/verdex.cfg @@ -0,0 +1,17 @@ +# Config for Gumstix Verdex XM4 and XL6P (PXA270) + +set CHIPNAME verdex +source [find target/pxa270.cfg] + +# The board supports separate reset lines +# Override this in the interface config for parallel dongles +reset_config trst_and_srst separate + +# XM4 = 400MHz, XL6P = 600MHz...let's run at 0.1*400MHz=40MHz +adapter_khz 40000 + +# flash bank +# XL6P has 32 MB flash +flash bank $_CHIPNAME.flash0 cfi 0x00000000 0x02000000 2 2 $_TARGETNAME +# XM4 has 16 MB flash +#flash bank $_CHIPNAME.flash0 cfi 0x00000000 0x01000000 2 2 $_TARGETNAME -- 2.39.5