From a30f519bd0cde78ba46b424314de94fdab863726 Mon Sep 17 00:00:00 2001 From: Tom Rix Date: Tue, 2 Jun 2009 20:53:56 -0500 Subject: [PATCH] ZOOM2 detect the version of the zoom2 board at runtime. There are currently 3 versions of the zoom2 board. The production board, that is currently being released. The beta board, similar in form to the production board but not released. The alpha board, a set of PCBs with a very limited circulation. GPIO 94 is used to determine the version of the board. If GPIO 94 is clear, the board is a production board, otherwise it is a beta board. The alpha board will likely be mistaken for a beta board. An alpha board was unavailible for testing. This has been tested on the beta and production boards. Signed-off-by: Tom Rix Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- board/omap3/zoom2/zoom2.c | 62 +++++++++++++++++++++++++++++++++++++-- board/omap3/zoom2/zoom2.h | 9 ++++++ 2 files changed, 68 insertions(+), 3 deletions(-) diff --git a/board/omap3/zoom2/zoom2.c b/board/omap3/zoom2/zoom2.c index e5c248de71..08fdafb644 100644 --- a/board/omap3/zoom2/zoom2.c +++ b/board/omap3/zoom2/zoom2.c @@ -33,6 +33,7 @@ #include #endif #include +#include #include #include #include @@ -60,6 +61,60 @@ static u32 gpmc_serial_TL16CP754C[GPMC_MAX_REG] = { 0x1D0904C4, 0 }; +/* Used to track the revision of the board */ +static zoom2_revision revision = ZOOM2_REVISION_UNKNOWN; + +/* + * Routine: zoom2_get_revision + * Description: Return the revision of the Zoom2 this code is running on. + */ +zoom2_revision zoom2_get_revision(void) +{ + return revision; +} + +/* + * Routine: zoom2_identify + * Description: Detect which version of Zoom2 we are running on. + */ +void zoom2_identify(void) +{ + /* + * To check for production board vs beta board, + * check if gpio 94 is clear. + * + * No way yet to check for alpha board identity. + * Alpha boards were produced in very limited quantities + * and they are not commonly used. They are mentioned here + * only for completeness. + */ + if (!omap_request_gpio(94)) { + unsigned int val; + + omap_set_gpio_direction(94, 1); + val = omap_get_gpio_datain(94); + omap_free_gpio(94); + + if (val) + revision = ZOOM2_REVISION_BETA; + else + revision = ZOOM2_REVISION_PRODUCTION; + } + + printf("Board revision "); + switch (revision) { + case ZOOM2_REVISION_PRODUCTION: + printf("Production\n"); + break; + case ZOOM2_REVISION_BETA: + printf("Beta\n"); + break; + default: + printf("Unknown\n"); + break; + } +} + /* * Routine: board_init * Description: Early hardware init. @@ -96,10 +151,11 @@ int board_init (void) * Routine: misc_init_r * Description: Configure zoom board specific configurations */ -int misc_init_r (void) +int misc_init_r(void) { - power_init_r (); - dieid_num_r (); + zoom2_identify(); + power_init_r(); + dieid_num_r(); return 0; } diff --git a/board/omap3/zoom2/zoom2.h b/board/omap3/zoom2/zoom2.h index cae8a7a7fc..a21d1d6899 100644 --- a/board/omap3/zoom2/zoom2.h +++ b/board/omap3/zoom2/zoom2.h @@ -32,6 +32,15 @@ const omap3_sysinfo sysinfo = { "NAND", }; +typedef enum { + ZOOM2_REVISION_UNKNOWN = 0, + ZOOM2_REVISION_ALPHA, + ZOOM2_REVISION_BETA, + ZOOM2_REVISION_PRODUCTION +} zoom2_revision; + +zoom2_revision zoom2_get_revision(void); + /* * IEN - Input Enable * IDIS - Input Disable -- 2.39.5