From a51c832cc18aeec439648f39f6759a1978206132 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 17 Jun 2015 21:16:59 +0200 Subject: [PATCH] sunxi: ga10h: Enable both otg and regular usb host controllers This allows using devices plugged into both ports of the tablet. Signed-off-by: Hans de Goede Acked-by: Ian Campbell --- arch/arm/dts/sun8i-a23-a33.dtsi | 18 ++++++++++++++++++ arch/arm/dts/sun8i-a33-ga10h-v1.1.dts | 8 ++++++++ configs/ga10h_v1_1_defconfig | 2 ++ 3 files changed, 28 insertions(+) diff --git a/arch/arm/dts/sun8i-a23-a33.dtsi b/arch/arm/dts/sun8i-a23-a33.dtsi index 7abd0ae314..5cd2e92c19 100644 --- a/arch/arm/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/dts/sun8i-a23-a33.dtsi @@ -332,6 +332,24 @@ #size-cells = <0>; }; + ehci0: usb@01c1a000 { + compatible = "allwinner,sun8i-a23-ehci", "generic-ehci"; + reg = <0x01c1a000 0x100>; + interrupts = ; + clocks = <&ahb1_gates 26>; + resets = <&ahb1_rst 26>; + status = "disabled"; + }; + + ohci0: usb@01c1a400 { + compatible = "allwinner,sun8i-a23-ohci", "generic-ohci"; + reg = <0x01c1a400 0x100>; + interrupts = ; + clocks = <&ahb1_gates 29>, <&usb_clk 16>; + resets = <&ahb1_rst 29>; + status = "disabled"; + }; + pio: pinctrl@01c20800 { /* compatible gets set in SoC specific dtsi file */ reg = <0x01c20800 0x400>; diff --git a/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts index 866703355b..da16343346 100644 --- a/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts +++ b/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts @@ -61,6 +61,10 @@ }; }; +&ehci0 { + status = "okay"; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -109,6 +113,10 @@ status = "okay"; }; +&ohci0 { + status = "okay"; +}; + &pio { mmc0_cd_pin_q8h: mmc0_cd_pin@0 { allwinner,pins = "PB4"; diff --git a/configs/ga10h_v1_1_defconfig b/configs/ga10h_v1_1_defconfig index 3d75ecd1d3..e766db4f6f 100644 --- a/configs/ga10h_v1_1_defconfig +++ b/configs/ga10h_v1_1_defconfig @@ -6,6 +6,7 @@ CONFIG_DRAM_ZQ=15291 CONFIG_DRAM_ODT_EN=y CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" +CONFIG_USB0_ID_DET="PH8" CONFIG_AXP_GPIO=y CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:52000,le:138,ri:162,up:22,lo:10,hs:20,vs:3,sync:3,vmode:0" CONFIG_VIDEO_LCD_DCLK_PHASE=0 @@ -23,3 +24,4 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" # CONFIG_CMD_FPGA is not set CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3000 +CONFIG_USB_EHCI_HCD=y -- 2.39.5