From a9038d7ecf1e3a0613fd98311b163e67637e28ee Mon Sep 17 00:00:00 2001 From: rtel Date: Tue, 3 Sep 2019 01:39:29 +0000 Subject: [PATCH] Add IAR RISC-V port to SVN - a work in progress. git-svn-id: https://svn.code.sf.net/p/freertos/code/trunk@2718 1d2547de-c912-0410-9cb9-b8ca96c0e9e2 --- .../portable/IAR/RISC-V/Documentation.url | 5 + ...freertos_risc_v_chip_specific_extensions.h | 109 +++++ ...freertos_risc_v_chip_specific_extensions.h | 68 +++ .../chip_specific_extensions/readme.txt | 23 + FreeRTOS/Source/portable/IAR/RISC-V/port.c | 193 ++++++++ FreeRTOS/Source/portable/IAR/RISC-V/portASM.s | 426 ++++++++++++++++++ .../Source/portable/IAR/RISC-V/portmacro.h | 149 ++++++ .../Source/portable/IAR/RISC-V/readme.txt | 23 + 8 files changed, 996 insertions(+) create mode 100644 FreeRTOS/Source/portable/IAR/RISC-V/Documentation.url create mode 100644 FreeRTOS/Source/portable/IAR/RISC-V/chip_specific_extensions/Pulpino_Vega_RV32M1RM/freertos_risc_v_chip_specific_extensions.h create mode 100644 FreeRTOS/Source/portable/IAR/RISC-V/chip_specific_extensions/RV32I_CLINT_no_extensions/freertos_risc_v_chip_specific_extensions.h create mode 100644 FreeRTOS/Source/portable/IAR/RISC-V/chip_specific_extensions/readme.txt create mode 100644 FreeRTOS/Source/portable/IAR/RISC-V/port.c create mode 100644 FreeRTOS/Source/portable/IAR/RISC-V/portASM.s create mode 100644 FreeRTOS/Source/portable/IAR/RISC-V/portmacro.h create mode 100644 FreeRTOS/Source/portable/IAR/RISC-V/readme.txt diff --git a/FreeRTOS/Source/portable/IAR/RISC-V/Documentation.url b/FreeRTOS/Source/portable/IAR/RISC-V/Documentation.url new file mode 100644 index 000000000..7cb013afb --- /dev/null +++ b/FreeRTOS/Source/portable/IAR/RISC-V/Documentation.url @@ -0,0 +1,5 @@ +[{000214A0-0000-0000-C000-000000000046}] +Prop3=19,11 +[InternetShortcut] +IDList= +URL=https://freertos.org/Using-FreeRTOS-on-RISC-V.html diff --git a/FreeRTOS/Source/portable/IAR/RISC-V/chip_specific_extensions/Pulpino_Vega_RV32M1RM/freertos_risc_v_chip_specific_extensions.h b/FreeRTOS/Source/portable/IAR/RISC-V/chip_specific_extensions/Pulpino_Vega_RV32M1RM/freertos_risc_v_chip_specific_extensions.h new file mode 100644 index 000000000..9e581431a --- /dev/null +++ b/FreeRTOS/Source/portable/IAR/RISC-V/chip_specific_extensions/Pulpino_Vega_RV32M1RM/freertos_risc_v_chip_specific_extensions.h @@ -0,0 +1,109 @@ +/* + * FreeRTOS Kernel V10.2.1 + * Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and t + + o permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +/* + * The FreeRTOS kernel's RISC-V port is split between the the code that is + * common across all currently supported RISC-V chips (implementations of the + * RISC-V ISA), and code that tailors the port to a specific RISC-V chip: + * + * + FreeRTOS\Source\portable\GCC\RISC-V-RV32\portASM.S contains the code that + * is common to all currently supported RISC-V chips. There is only one + * portASM.S file because the same file is built for all RISC-V target chips. + * + * + Header files called freertos_risc_v_chip_specific_extensions.h contain the + * code that tailors the FreeRTOS kernel's RISC-V port to a specific RISC-V + * chip. There are multiple freertos_risc_v_chip_specific_extensions.h files + * as there are multiple RISC-V chip implementations. + * + * !!!NOTE!!! + * TAKE CARE TO INCLUDE THE CORRECT freertos_risc_v_chip_specific_extensions.h + * HEADER FILE FOR THE CHIP IN USE. This is done using the assembler's (not the + * compiler's!) include path. For example, if the chip in use includes a core + * local interrupter (CLINT) and does not include any chip specific register + * extensions then add the path below to the assembler's include path: + * FreeRTOS\Source\portable\GCC\RISC-V-RV32\chip_specific_extensions\RV32I_CLINT_no_extensions + * + */ + +/* + * This freertos_risc_v_chip_specific_extensions.h is for use with Pulpino Ri5cy + * devices, developed and tested using the Vega board RV32M1RM. + */ + +#ifndef __FREERTOS_RISC_V_EXTENSIONS_H__ +#define __FREERTOS_RISC_V_EXTENSIONS_H__ + +#define portasmHAS_CLINT 0 + +/* Constants to define the additional registers found on the Pulpino RI5KY. */ +#define lpstart0 0x7b0 +#define lpend0 0x7b1 +#define lpcount0 0x7b2 +#define lpstart1 0x7b4 +#define lpend1 0x7b5 +#define lpcount1 0x7b6 + +/* Six additional registers to save and restore, as per the #defines above. */ +#define portasmADDITIONAL_CONTEXT_SIZE 6 /* Must be even number on 32-bit cores. */ + +/* Save additional registers found on the Pulpino. */ +.macro portasmSAVE_ADDITIONAL_REGISTERS + addi sp, sp, -(portasmADDITIONAL_CONTEXT_SIZE * portWORD_SIZE) /* Make room for the additional registers. */ + csrr t0, lpstart0 /* Load additional registers into accessible temporary registers. */ + csrr t1, lpend0 + csrr t2, lpcount0 + csrr t3, lpstart1 + csrr t4, lpend1 + csrr t5, lpcount1 + sw t0, 1 * portWORD_SIZE( sp ) + sw t1, 2 * portWORD_SIZE( sp ) + sw t2, 3 * portWORD_SIZE( sp ) + sw t3, 4 * portWORD_SIZE( sp ) + sw t4, 5 * portWORD_SIZE( sp ) + sw t5, 6 * portWORD_SIZE( sp ) + .endm + +/* Restore the additional registers found on the Pulpino. */ +.macro portasmRESTORE_ADDITIONAL_REGISTERS + lw t0, 1 * portWORD_SIZE( sp ) /* Load additional registers into accessible temporary registers. */ + lw t1, 2 * portWORD_SIZE( sp ) + lw t2, 3 * portWORD_SIZE( sp ) + lw t3, 4 * portWORD_SIZE( sp ) + lw t4, 5 * portWORD_SIZE( sp ) + lw t5, 6 * portWORD_SIZE( sp ) + csrw lpstart0, t0 + csrw lpend0, t1 + csrw lpcount0, t2 + csrw lpstart1, t3 + csrw lpend1, t4 + csrw lpcount1, t5 + addi sp, sp, (portasmADDITIONAL_CONTEXT_SIZE * portWORD_SIZE )/* Remove space added for additional registers. */ + .endm + +#endif /* __FREERTOS_RISC_V_EXTENSIONS_H__ */ diff --git a/FreeRTOS/Source/portable/IAR/RISC-V/chip_specific_extensions/RV32I_CLINT_no_extensions/freertos_risc_v_chip_specific_extensions.h b/FreeRTOS/Source/portable/IAR/RISC-V/chip_specific_extensions/RV32I_CLINT_no_extensions/freertos_risc_v_chip_specific_extensions.h new file mode 100644 index 000000000..903bdb71e --- /dev/null +++ b/FreeRTOS/Source/portable/IAR/RISC-V/chip_specific_extensions/RV32I_CLINT_no_extensions/freertos_risc_v_chip_specific_extensions.h @@ -0,0 +1,68 @@ +/* + * FreeRTOS Kernel V10.2.1 + * Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +/* + * The FreeRTOS kernel's RISC-V port is split between the the code that is + * common across all currently supported RISC-V chips (implementations of the + * RISC-V ISA), and code that tailors the port to a specific RISC-V chip: + * + * + FreeRTOS\Source\portable\GCC\RISC-V-RV32\portASM.S contains the code that + * is common to all currently supported RISC-V chips. There is only one + * portASM.S file because the same file is built for all RISC-V target chips. + * + * + Header files called freertos_risc_v_chip_specific_extensions.h contain the + * code that tailors the FreeRTOS kernel's RISC-V port to a specific RISC-V + * chip. There are multiple freertos_risc_v_chip_specific_extensions.h files + * as there are multiple RISC-V chip implementations. + * + * !!!NOTE!!! + * TAKE CARE TO INCLUDE THE CORRECT freertos_risc_v_chip_specific_extensions.h + * HEADER FILE FOR THE CHIP IN USE. This is done using the assembler's (not the + * compiler's!) include path. For example, if the chip in use includes a core + * local interrupter (CLINT) and does not include any chip specific register + * extensions then add the path below to the assembler's include path: + * FreeRTOS\Source\portable\GCC\RISC-V-RV32\chip_specific_extensions\RV32I_CLINT_no_extensions + * + */ + + +#ifndef __FREERTOS_RISC_V_EXTENSIONS_H__ +#define __FREERTOS_RISC_V_EXTENSIONS_H__ + +#define portasmHAS_CLINT 1 +#define portasmADDITIONAL_CONTEXT_SIZE 0 /* Must be even number on 32-bit cores. */ + +portasmSAVE_ADDITIONAL_REGISTERS MACRO + /* No additional registers to save, so this macro does nothing. */ + ENDM + +/* Restore the additional registers found on the Pulpino. */ +portasmRESTORE_ADDITIONAL_REGISTERS MACRO + /* No additional registers to restore, so this macro does nothing. */ + ENDM + +#endif /* __FREERTOS_RISC_V_EXTENSIONS_H__ */ diff --git a/FreeRTOS/Source/portable/IAR/RISC-V/chip_specific_extensions/readme.txt b/FreeRTOS/Source/portable/IAR/RISC-V/chip_specific_extensions/readme.txt new file mode 100644 index 000000000..69d98d924 --- /dev/null +++ b/FreeRTOS/Source/portable/IAR/RISC-V/chip_specific_extensions/readme.txt @@ -0,0 +1,23 @@ +/* + * The FreeRTOS kernel's RISC-V port is split between the the code that is + * common across all currently supported RISC-V chips (implementations of the + * RISC-V ISA), and code that tailors the port to a specific RISC-V chip: + * + * + FreeRTOS\Source\portable\GCC\RISC-V-RV32\portASM.S contains the code that + * is common to all currently supported RISC-V chips. There is only one + * portASM.S file because the same file is built for all RISC-V target chips. + * + * + Header files called freertos_risc_v_chip_specific_extensions.h contain the + * code that tailors the FreeRTOS kernel's RISC-V port to a specific RISC-V + * chip. There are multiple freertos_risc_v_chip_specific_extensions.h files + * as there are multiple RISC-V chip implementations. + * + * !!!NOTE!!! + * TAKE CARE TO INCLUDE THE CORRECT freertos_risc_v_chip_specific_extensions.h + * HEADER FILE FOR THE CHIP IN USE. This is done using the assembler's (not the + * compiler's!) include path. For example, if the chip in use includes a core + * local interrupter (CLINT) and does not include any chip specific register + * extensions then add the path below to the assembler's include path: + * FreeRTOS\Source\portable\GCC\RISC-V-RV32\chip_specific_extensions\RV32I_CLINT_no_extensions + * + */ diff --git a/FreeRTOS/Source/portable/IAR/RISC-V/port.c b/FreeRTOS/Source/portable/IAR/RISC-V/port.c new file mode 100644 index 000000000..025cb2fae --- /dev/null +++ b/FreeRTOS/Source/portable/IAR/RISC-V/port.c @@ -0,0 +1,193 @@ +/* + * FreeRTOS Kernel V10.2.1 + * Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +/*----------------------------------------------------------- + * Implementation of functions defined in portable.h for the RISC-V RV32 port. + *----------------------------------------------------------*/ + +/* Scheduler includes. */ +#include "FreeRTOS.h" +#include "task.h" +#include "portmacro.h" + +#ifndef configCLINT_BASE_ADDRESS + #warning configCLINT_BASE_ADDRESS must be defined in FreeRTOSConfig.h. If the target chip includes a Core Local Interrupter (CLINT) then set configCLINT_BASE_ADDRESS to the CLINT base address. Otherwise set configCLINT_BASE_ADDRESS to 0. +#endif + +/* Let the user override the pre-loading of the initial LR with the address of +prvTaskExitError() in case it messes up unwinding of the stack in the +debugger. */ +#ifdef configTASK_RETURN_ADDRESS + #define portTASK_RETURN_ADDRESS configTASK_RETURN_ADDRESS +#else + #define portTASK_RETURN_ADDRESS prvTaskExitError +#endif + +/* The stack used by interrupt service routines. Set configISR_STACK_SIZE_WORDS +to use a statically allocated array as the interrupt stack. Alternative leave +configISR_STACK_SIZE_WORDS undefined and update the linker script so that a +linker variable names __freertos_irq_stack_top has the same value as the top +of the stack used by main. Using the linker script method will repurpose the +stack that was used by main before the scheduler was started for use as the +interrupt stack after the scheduler has started. */ +#ifdef configISR_STACK_SIZE_WORDS + static __attribute__ ((aligned(16))) StackType_t xISRStack[ configISR_STACK_SIZE_WORDS ] = { 0 }; + StackType_t xISRStackTop = ( StackType_t ) 0; +#else + extern const uint32_t __freertos_irq_stack_top[]; + const StackType_t xISRStackTop = ( StackType_t ) __freertos_irq_stack_top; +#endif + +/* + * Setup the timer to generate the tick interrupts. The implementation in this + * file is weak to allow application writers to change the timer used to + * generate the tick interrupt. + */ +void vPortSetupTimerInterrupt( void ) __attribute__(( weak )); + +/*-----------------------------------------------------------*/ + +/* Used to program the machine timer compare register. */ +uint64_t ullNextTime = 0ULL; +const uint64_t *pullNextTime = &ullNextTime; +const size_t uxTimerIncrementsForOneTick = ( size_t ) ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ); /* Assumes increment won't go over 32-bits. */ +volatile uint64_t * const pullMachineTimerCompareRegister = ( uint64_t * ) ( configCLINT_BASE_ADDRESS + 0x4000 ); + +/* Set configCHECK_FOR_STACK_OVERFLOW to 3 to add ISR stack checking to task +stack checking. A problem in the ISR stack will trigger an assert, not call the +stack overflow hook function (because the stack overflow hook is specific to a +task stack, not the ISR stack). */ +#if( configCHECK_FOR_STACK_OVERFLOW > 2 ) + #warning This path not tested, or even compiled yet. + /* Don't use 0xa5 as the stack fill bytes as that is used by the kernerl for + the task stacks, and so will legitimately appear in many positions within + the ISR stack. */ + #define portISR_STACK_FILL_BYTE 0xee + + static const uint8_t ucExpectedStackBytes[] = { + portISR_STACK_FILL_BYTE, portISR_STACK_FILL_BYTE, portISR_STACK_FILL_BYTE, portISR_STACK_FILL_BYTE, \ + portISR_STACK_FILL_BYTE, portISR_STACK_FILL_BYTE, portISR_STACK_FILL_BYTE, portISR_STACK_FILL_BYTE, \ + portISR_STACK_FILL_BYTE, portISR_STACK_FILL_BYTE, portISR_STACK_FILL_BYTE, portISR_STACK_FILL_BYTE, \ + portISR_STACK_FILL_BYTE, portISR_STACK_FILL_BYTE, portISR_STACK_FILL_BYTE, portISR_STACK_FILL_BYTE, \ + portISR_STACK_FILL_BYTE, portISR_STACK_FILL_BYTE, portISR_STACK_FILL_BYTE, portISR_STACK_FILL_BYTE }; \ + + #define portCHECK_ISR_STACK() configASSERT( ( memcmp( ( void * ) xISRStack, ( void * ) ucExpectedStackBytes, sizeof( ucExpectedStackBytes ) ) == 0 ) ) +#else + /* Define the function away. */ + #define portCHECK_ISR_STACK() +#endif /* configCHECK_FOR_STACK_OVERFLOW > 2 */ + +/*-----------------------------------------------------------*/ + +#if( configCLINT_BASE_ADDRESS != 0 ) + + void vPortSetupTimerInterrupt( void ) + { + uint32_t ulCurrentTimeHigh, ulCurrentTimeLow; + volatile uint32_t * const pulTimeHigh = ( uint32_t * ) ( configCLINT_BASE_ADDRESS + 0xBFFC ); + volatile uint32_t * const pulTimeLow = ( uint32_t * ) ( configCLINT_BASE_ADDRESS + 0xBFF8 ); + + do + { + ulCurrentTimeHigh = *pulTimeHigh; + ulCurrentTimeLow = *pulTimeLow; + } while( ulCurrentTimeHigh != *pulTimeHigh ); + + ullNextTime = ( uint64_t ) ulCurrentTimeHigh; + ullNextTime <<= 32ULL; + ullNextTime |= ( uint64_t ) ulCurrentTimeLow; + ullNextTime += ( uint64_t ) uxTimerIncrementsForOneTick; + *pullMachineTimerCompareRegister = ullNextTime; + + /* Prepare the time to use after the next tick interrupt. */ + ullNextTime += ( uint64_t ) uxTimerIncrementsForOneTick; + } + +#endif /* ( configCLINT_BASE_ADDRESS != 0 ) */ +/*-----------------------------------------------------------*/ + +BaseType_t xPortStartScheduler( void ) +{ +extern void xPortStartFirstTask( void ); +#warning Replicate this change in the GCC version. + #ifdef configISR_STACK_SIZE_WORDS + xISRStackTop = ( ( StackType_t ) &( xISRStack[ configISR_STACK_SIZE_WORDS - 1 ] ) & ~portBYTE_ALIGNMENT_MASK ); + #endif + + #if( configASSERT_DEFINED == 1 ) + { + volatile uint32_t mtvec = 0; + + /* Check the least significant two bits of mtvec are 00 - indicating + single vector mode. */ + __asm volatile( "csrr %0, 0x305" : "=r"( mtvec ) ); /* 0x305 is mtvec. */ + configASSERT( ( mtvec & 0x03UL ) == 0 ); + + /* Check alignment of the interrupt stack - which is the same as the + stack that was being used by main() prior to the scheduler being + started. */ + configASSERT( ( xISRStackTop & portBYTE_ALIGNMENT_MASK ) == 0 ); + } + #endif /* configASSERT_DEFINED */ + + /* If there is a CLINT then it is ok to use the default implementation + in this file, otherwise vPortSetupTimerInterrupt() must be implemented to + configure whichever clock is to be used to generate the tick interrupt. */ + vPortSetupTimerInterrupt(); + + #if( configCLINT_BASE_ADDRESS != 0 ) + { + /* Enable mtime and external interrupts. 1<<7 for timer interrupt, 1<<11 + for external interrupt. _RB_ What happens here when mtime is not present as + with pulpino? */ + __asm volatile( "csrs 0x304, %0" :: "r"(0x880) ); /* 0x304 is mie. */ + } + #else + { + /* Enable external interrupts. */ + __asm volatile( "csrs 0x304, %0" :: "r"(0x800) ); /* 304 is mie. */ + } + #endif /* configCLINT_BASE_ADDRESS */ + + xPortStartFirstTask(); + + /* Should not get here as after calling xPortStartFirstTask() only tasks + should be executing. */ + return pdFAIL; +} +/*-----------------------------------------------------------*/ + +void vPortEndScheduler( void ) +{ + /* Not implemented. */ + for( ;; ); +} + + + + + diff --git a/FreeRTOS/Source/portable/IAR/RISC-V/portASM.s b/FreeRTOS/Source/portable/IAR/RISC-V/portASM.s new file mode 100644 index 000000000..9e004dea3 --- /dev/null +++ b/FreeRTOS/Source/portable/IAR/RISC-V/portASM.s @@ -0,0 +1,426 @@ +/* + * FreeRTOS Kernel V10.2.1 + * Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +/* + * The FreeRTOS kernel's RISC-V port is split between the the code that is + * common across all currently supported RISC-V chips (implementations of the + * RISC-V ISA), and code which tailors the port to a specific RISC-V chip: + * + * + The code that is common to all RISC-V chips is implemented in + * FreeRTOS\Source\portable\GCC\RISC-V-RV32\portASM.S. There is only one + * portASM.S file because the same file is used no matter which RISC-V chip is + * in use. + * + * + The code that tailors the kernel's RISC-V port to a specific RISC-V + * chip is implemented in freertos_risc_v_chip_specific_extensions.h. There + * is one freertos_risc_v_chip_specific_extensions.h that can be used with any + * RISC-V chip that both includes a standard CLINT and does not add to the + * base set of RISC-V registers. There are additional + * freertos_risc_v_chip_specific_extensions.h files for RISC-V implementations + * that do not include a standard CLINT or do add to the base set of RISC-V + * registers. + * + * CARE MUST BE TAKEN TO INCLDUE THE CORRECT + * freertos_risc_v_chip_specific_extensions.h HEADER FILE FOR THE CHIP + * IN USE. To include the correct freertos_risc_v_chip_specific_extensions.h + * header file ensure the path to the correct header file is in the assembler's + * include path. + * + * This freertos_risc_v_chip_specific_extensions.h is for use on RISC-V chips + * that include a standard CLINT and do not add to the base set of RISC-V + * registers. + * + */ +#if __riscv_xlen == 64 + #define portWORD_SIZE 8 + #define store_x sd + #define load_x ld +#elif __riscv_xlen == 32 + #define store_x sw + #define load_x lw + #define portWORD_SIZE 4 +#else + #error Assembler did not define __riscv_xlen +#endif + +#include "freertos_risc_v_chip_specific_extensions.h" + +/* Check the freertos_risc_v_chip_specific_extensions.h and/or command line +definitions. */ +#ifndef portasmHAS_CLINT + #error freertos_risc_v_chip_specific_extensions.h must define portasmHAS_CLINT to either 1 (CLINT present) or 0 (clint not present). +#endif + +#ifndef portasmHANDLE_INTERRUPT + #error portasmHANDLE_INTERRUPT must be defined to the function to be called to handle external/peripheral interrupts. portasmHANDLE_INTERRUPT can be defined on the assmbler command line or in the appropriate freertos_risc_v_chip_specific_extensions.h header file. +#endif + +/* CSR definitions. */ +#define CSR_MSTATUS 0x300 +#define CSR_MTVEC 0x305 +#define CSR_MEPC 0x341 +#define CSR_MCAUSE 0x342 + + +/* Only the standard core registers are stored by default. Any additional +registers must be saved by the portasmSAVE_ADDITIONAL_REGISTERS and +portasmRESTORE_ADDITIONAL_REGISTERS macros - which can be defined in a chip +specific version of freertos_risc_v_chip_specific_extensions.h. See the notes +at the top of this file. */ +#define portCONTEXT_SIZE ( 30 * portWORD_SIZE ) + + PUBLIC xPortStartFirstTask + PUBLIC freertos_risc_v_trap_handler + PUBLIC pxPortInitialiseStack + EXTERN pxCurrentTCB + EXTERN ulPortTrapHandler + EXTERN vTaskSwitchContext + EXTERN Timer_IRQHandler + EXTERN pullMachineTimerCompareRegister + EXTERN pullNextTime + EXTERN uxTimerIncrementsForOneTick /* size_t type so 32-bit on 32-bit core and 64-bits on 64-bit core. */ + EXTERN xISRStackTop + EXTERN xTaskIncrementTick + EXTERN portasmHANDLE_INTERRUPT + +/*-----------------------------------------------------------*/ + + SECTION `.text`:CODE:NOROOT(2) + CODE + +freertos_risc_v_trap_handler: + addi sp, sp, -portCONTEXT_SIZE + store_x x1, 1 * portWORD_SIZE( sp ) + store_x x5, 2 * portWORD_SIZE( sp ) + store_x x6, 3 * portWORD_SIZE( sp ) + store_x x7, 4 * portWORD_SIZE( sp ) + store_x x8, 5 * portWORD_SIZE( sp ) + store_x x9, 6 * portWORD_SIZE( sp ) + store_x x10, 7 * portWORD_SIZE( sp ) + store_x x11, 8 * portWORD_SIZE( sp ) + store_x x12, 9 * portWORD_SIZE( sp ) + store_x x13, 10 * portWORD_SIZE( sp ) + store_x x14, 11 * portWORD_SIZE( sp ) + store_x x15, 12 * portWORD_SIZE( sp ) + store_x x16, 13 * portWORD_SIZE( sp ) + store_x x17, 14 * portWORD_SIZE( sp ) + store_x x18, 15 * portWORD_SIZE( sp ) + store_x x19, 16 * portWORD_SIZE( sp ) + store_x x20, 17 * portWORD_SIZE( sp ) + store_x x21, 18 * portWORD_SIZE( sp ) + store_x x22, 19 * portWORD_SIZE( sp ) + store_x x23, 20 * portWORD_SIZE( sp ) + store_x x24, 21 * portWORD_SIZE( sp ) + store_x x25, 22 * portWORD_SIZE( sp ) + store_x x26, 23 * portWORD_SIZE( sp ) + store_x x27, 24 * portWORD_SIZE( sp ) + store_x x28, 25 * portWORD_SIZE( sp ) + store_x x29, 26 * portWORD_SIZE( sp ) + store_x x30, 27 * portWORD_SIZE( sp ) + store_x x31, 28 * portWORD_SIZE( sp ) + + csrr t0, CSR_MSTATUS /* Required for MPIE bit. */ + store_x t0, 29 * portWORD_SIZE( sp ) + + portasmSAVE_ADDITIONAL_REGISTERS /* Defined in freertos_risc_v_chip_specific_extensions.h to save any registers unique to the RISC-V implementation. */ + + load_x t0, pxCurrentTCB /* Load pxCurrentTCB. */ + store_x sp, 0( t0 ) /* Write sp to first TCB member. */ + + csrr a0, CSR_MCAUSE + csrr a1, CSR_MEPC + +test_if_asynchronous: + srli a2, a0, __riscv_xlen - 1 /* MSB of mcause is 1 if handing an asynchronous interrupt - shift to LSB to clear other bits. */ + beq a2, x0, handle_synchronous /* Branch past interrupt handing if not asynchronous. */ + store_x a1, 0( sp ) /* Asynch so save unmodified exception return address. */ + +handle_asynchronous: + +#if( portasmHAS_CLINT != 0 ) + + test_if_mtimer: /* If there is a CLINT then the mtimer is used to generate the tick interrupt. */ + + addi t0, x0, 1 + + slli t0, t0, __riscv_xlen - 1 /* LSB is already set, shift into MSB. Shift 31 on 32-bit or 63 on 64-bit cores. */ + addi t1, t0, 7 /* 0x8000[]0007 == machine timer interrupt. */ + bne a0, t1, test_if_external_interrupt + + load_x t0, pullMachineTimerCompareRegister /* Load address of compare register into t0. */ + load_x t1, pullNextTime /* Load the address of ullNextTime into t1. */ + + #if( __riscv_xlen == 32 ) + + /* Update the 64-bit mtimer compare match value in two 32-bit writes. */ + lw t2, 0(t1) /* Load the low word of ullNextTime into t2. */ + lw t3, 4(t1) /* Load the high word of ullNextTime into t3. */ + sw t2, 0(t0) /* Store low word of ullNextTime into compare register. */ + sw t3, 4(t0) /* Store high word of ullNextTime into compare register. */ + lw t0, uxTimerIncrementsForOneTick /* Load the value of ullTimerIncrementForOneTick into t0 (could this be optimized by storing in an array next to pullNextTime?). */ + add t4, t0, t2 /* Add the low word of ullNextTime to the timer increments for one tick (assumes timer increment for one tick fits in 32-bits). */ + sltu t5, t4, t2 /* See if the sum of low words overflowed (what about the zero case?). */ + add t6, t3, t5 /* Add overflow to high word of ullNextTime. */ + sw t4, 0(t1) /* Store new low word of ullNextTime. */ + sw t6, 4(t1) /* Store new high word of ullNextTime. */ + + #endif /* __riscv_xlen == 32 */ + + #if( __riscv_xlen == 64 ) + + /* Update the 64-bit mtimer compare match value. */ + ld t2, 0(t1) /* Load ullNextTime into t2. */ + sd t2, 0(t0) /* Store ullNextTime into compare register. */ + ld t0, uxTimerIncrementsForOneTick /* Load the value of ullTimerIncrementForOneTick into t0 (could this be optimized by storing in an array next to pullNextTime?). */ + add t4, t0, t2 /* Add ullNextTime to the timer increments for one tick. */ + sd t4, 0(t1) /* Store ullNextTime. */ + + #endif /* __riscv_xlen == 64 */ + + load_x sp, xISRStackTop /* Switch to ISR stack before function call. */ + jal xTaskIncrementTick + beqz a0, processed_source /* Don't switch context if incrementing tick didn't unblock a task. */ + jal vTaskSwitchContext + j processed_source + + test_if_external_interrupt: /* If there is a CLINT and the mtimer interrupt is not pending then check to see if an external interrupt is pending. */ + addi t1, t1, 4 /* 0x80000007 + 4 = 0x8000000b == Machine external interrupt. */ + bne a0, t1, as_yet_unhandled /* Something as yet unhandled. */ + +#endif /* portasmHAS_CLINT */ + + load_x sp, xISRStackTop /* Switch to ISR stack before function call. */ + jal portasmHANDLE_INTERRUPT /* Jump to the interrupt handler if there is no CLINT or if there is a CLINT and it has been determined that an external interrupt is pending. */ + j processed_source + +handle_synchronous: + addi a1, a1, 4 /* Synchronous so updated exception return address to the instruction after the instruction that generated the exeption. */ + store_x a1, 0( sp ) /* Save updated exception return address. */ + +test_if_environment_call: + li t0, 11 /* 11 == environment call. */ + bne a0, t0, is_exception /* Not an M environment call, so some other exception. */ + load_x sp, xISRStackTop /* Switch to ISR stack before function call. */ + jal vTaskSwitchContext + j processed_source + +is_exception: + ebreak + j is_exception + +as_yet_unhandled: + ebreak + j as_yet_unhandled + +processed_source: + load_x t1, pxCurrentTCB /* Load pxCurrentTCB. */ + load_x sp, 0( t1 ) /* Read sp from first TCB member. */ + + /* Load mret with the address of the next instruction in the task to run next. */ + load_x t0, 0( sp ) + csrw CSR_MEPC, t0 + + portasmRESTORE_ADDITIONAL_REGISTERS /* Defined in freertos_risc_v_chip_specific_extensions.h to restore any registers unique to the RISC-V implementation. */ + + /* Load mstatus with the interrupt enable bits used by the task. */ + load_x t0, 29 * portWORD_SIZE( sp ) + csrw CSR_MSTATUS, t0 /* Required for MPIE bit. */ + + load_x x1, 1 * portWORD_SIZE( sp ) + load_x x5, 2 * portWORD_SIZE( sp ) /* t0 */ + load_x x6, 3 * portWORD_SIZE( sp ) /* t1 */ + load_x x7, 4 * portWORD_SIZE( sp ) /* t2 */ + load_x x8, 5 * portWORD_SIZE( sp ) /* s0/fp */ + load_x x9, 6 * portWORD_SIZE( sp ) /* s1 */ + load_x x10, 7 * portWORD_SIZE( sp ) /* a0 */ + load_x x11, 8 * portWORD_SIZE( sp ) /* a1 */ + load_x x12, 9 * portWORD_SIZE( sp ) /* a2 */ + load_x x13, 10 * portWORD_SIZE( sp ) /* a3 */ + load_x x14, 11 * portWORD_SIZE( sp ) /* a4 */ + load_x x15, 12 * portWORD_SIZE( sp ) /* a5 */ + load_x x16, 13 * portWORD_SIZE( sp ) /* a6 */ + load_x x17, 14 * portWORD_SIZE( sp ) /* a7 */ + load_x x18, 15 * portWORD_SIZE( sp ) /* s2 */ + load_x x19, 16 * portWORD_SIZE( sp ) /* s3 */ + load_x x20, 17 * portWORD_SIZE( sp ) /* s4 */ + load_x x21, 18 * portWORD_SIZE( sp ) /* s5 */ + load_x x22, 19 * portWORD_SIZE( sp ) /* s6 */ + load_x x23, 20 * portWORD_SIZE( sp ) /* s7 */ + load_x x24, 21 * portWORD_SIZE( sp ) /* s8 */ + load_x x25, 22 * portWORD_SIZE( sp ) /* s9 */ + load_x x26, 23 * portWORD_SIZE( sp ) /* s10 */ + load_x x27, 24 * portWORD_SIZE( sp ) /* s11 */ + load_x x28, 25 * portWORD_SIZE( sp ) /* t3 */ + load_x x29, 26 * portWORD_SIZE( sp ) /* t4 */ + load_x x30, 27 * portWORD_SIZE( sp ) /* t5 */ + load_x x31, 28 * portWORD_SIZE( sp ) /* t6 */ + addi sp, sp, portCONTEXT_SIZE + + mret + +/*-----------------------------------------------------------*/ + +xPortStartFirstTask: + +#if( portasmHAS_CLINT != 0 ) + /* If there is a clint then interrupts can branch directly to the FreeRTOS + trap handler. Otherwise the interrupt controller will need to be configured + outside of this file. */ + la t0, freertos_risc_v_trap_handler + csrw CSR_MTVEC, t0 +#endif /* portasmHAS_CLILNT */ + + load_x sp, pxCurrentTCB /* Load pxCurrentTCB. */ + load_x sp, 0( sp ) /* Read sp from first TCB member. */ + + load_x x1, 0( sp ) /* Note for starting the scheduler the exception return address is used as the function return address. */ + + portasmRESTORE_ADDITIONAL_REGISTERS /* Defined in freertos_risc_v_chip_specific_extensions.h to restore any registers unique to the RISC-V implementation. */ + + load_x t0, 29 * portWORD_SIZE( sp ) /* mstatus */ + csrrw x0, CSR_MSTATUS, t0 /* Interrupts enabled from here! */ + + load_x x5, 2 * portWORD_SIZE( sp ) /* t0 */ + load_x x6, 3 * portWORD_SIZE( sp ) /* t1 */ + load_x x7, 4 * portWORD_SIZE( sp ) /* t2 */ + load_x x8, 5 * portWORD_SIZE( sp ) /* s0/fp */ + load_x x9, 6 * portWORD_SIZE( sp ) /* s1 */ + load_x x10, 7 * portWORD_SIZE( sp ) /* a0 */ + load_x x11, 8 * portWORD_SIZE( sp ) /* a1 */ + load_x x12, 9 * portWORD_SIZE( sp ) /* a2 */ + load_x x13, 10 * portWORD_SIZE( sp ) /* a3 */ + load_x x14, 11 * portWORD_SIZE( sp ) /* a4 */ + load_x x15, 12 * portWORD_SIZE( sp ) /* a5 */ + load_x x16, 13 * portWORD_SIZE( sp ) /* a6 */ + load_x x17, 14 * portWORD_SIZE( sp ) /* a7 */ + load_x x18, 15 * portWORD_SIZE( sp ) /* s2 */ + load_x x19, 16 * portWORD_SIZE( sp ) /* s3 */ + load_x x20, 17 * portWORD_SIZE( sp ) /* s4 */ + load_x x21, 18 * portWORD_SIZE( sp ) /* s5 */ + load_x x22, 19 * portWORD_SIZE( sp ) /* s6 */ + load_x x23, 20 * portWORD_SIZE( sp ) /* s7 */ + load_x x24, 21 * portWORD_SIZE( sp ) /* s8 */ + load_x x25, 22 * portWORD_SIZE( sp ) /* s9 */ + load_x x26, 23 * portWORD_SIZE( sp ) /* s10 */ + load_x x27, 24 * portWORD_SIZE( sp ) /* s11 */ + load_x x28, 25 * portWORD_SIZE( sp ) /* t3 */ + load_x x29, 26 * portWORD_SIZE( sp ) /* t4 */ + load_x x30, 27 * portWORD_SIZE( sp ) /* t5 */ + load_x x31, 28 * portWORD_SIZE( sp ) /* t6 */ + addi sp, sp, portCONTEXT_SIZE + ret + +/*-----------------------------------------------------------*/ + +/* + * Unlike other ports pxPortInitialiseStack() is written in assembly code as it + * needs access to the portasmADDITIONAL_CONTEXT_SIZE constant. The prototype + * for the function is as per the other ports: + * StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters ); + * + * As per the standard RISC-V ABI pxTopcOfStack is passed in in a0, pxCode in + * a1, and pvParameters in a2. The new top of stack is passed out in a0. + * + * RISC-V maps registers to ABI names as follows (X1 to X31 integer registers + * for the 'I' profile, X1 to X15 for the 'E' profile, currently I assumed). + * + * Register ABI Name Description Saver + * x0 zero Hard-wired zero - + * x1 ra Return address Caller + * x2 sp Stack pointer Callee + * x3 gp Global pointer - + * x4 tp Thread pointer - + * x5-7 t0-2 Temporaries Caller + * x8 s0/fp Saved register/Frame pointer Callee + * x9 s1 Saved register Callee + * x10-11 a0-1 Function Arguments/return values Caller + * x12-17 a2-7 Function arguments Caller + * x18-27 s2-11 Saved registers Callee + * x28-31 t3-6 Temporaries Caller + * + * The RISC-V context is saved t FreeRTOS tasks in the following stack frame, + * where the global and thread pointers are currently assumed to be constant so + * are not saved: + * + * mstatus + * x31 + * x30 + * x29 + * x28 + * x27 + * x26 + * x25 + * x24 + * x23 + * x22 + * x21 + * x20 + * x19 + * x18 + * x17 + * x16 + * x15 + * x14 + * x13 + * x12 + * x11 + * pvParameters + * x9 + * x8 + * x7 + * x6 + * x5 + * portTASK_RETURN_ADDRESS + * [chip specific registers go here] + * pxCode + */ +pxPortInitialiseStack: + + csrr t0, CSR_MSTATUS /* Obtain current mstatus value. */ + addi t1, x0, 0x188 /* Generate the value 0x1880, which are the MPIE and MPP bits to set in mstatus. */ + slli t1, t1, 4 + or t0, t0, t1 /* Set MPIE and MPP bits in mstatus value. */ + + addi a0, a0, -portWORD_SIZE + store_x t0, 0(a0) /* mstatus onto the stack. */ + addi a0, a0, -(22 * portWORD_SIZE) /* Space for registers x11-x31. */ + store_x a2, 0(a0) /* Task parameters (pvParameters parameter) goes into register X10/a0 on the stack. */ + addi a0, a0, -(6 * portWORD_SIZE) /* Space for registers x5-x9. */ + store_x x0, 0(a0) /* Return address onto the stack, could be portTASK_RETURN_ADDRESS */ + addi t0, x0, portasmADDITIONAL_CONTEXT_SIZE /* The number of chip specific additional registers. */ +chip_specific_stack_frame: /* First add any chip specific registers to the stack frame being created. */ + beq t0, x0, no_more_regs /* No more chip specific registers to save. */ + addi a0, a0, -portWORD_SIZE /* Make space for chip specific register. */ + store_x x0, 0(a0) /* Give the chip specific register an initial value of zero. */ + addi t0, t0, -1 /* Decrement the count of chip specific registers remaining. */ + j chip_specific_stack_frame /* Until no more chip specific registers. */ +no_more_regs: + addi a0, a0, -portWORD_SIZE + store_x a1, 0(a0) /* mret value (pxCode parameter) onto the stack. */ + ret + +/*-----------------------------------------------------------*/ diff --git a/FreeRTOS/Source/portable/IAR/RISC-V/portmacro.h b/FreeRTOS/Source/portable/IAR/RISC-V/portmacro.h new file mode 100644 index 000000000..2a485d320 --- /dev/null +++ b/FreeRTOS/Source/portable/IAR/RISC-V/portmacro.h @@ -0,0 +1,149 @@ +/* + * FreeRTOS Kernel V10.2.1 + * Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef PORTMACRO_H +#define PORTMACRO_H + +#include "intrinsics.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/*----------------------------------------------------------- + * Port specific definitions. + * + * The settings in this file configure FreeRTOS correctly for the + * given hardware and compiler. + * + * These settings should not be altered. + *----------------------------------------------------------- + */ + +/* Type definitions. */ +#if __riscv_xlen == 64 + #define portSTACK_TYPE uint64_t + #define portBASE_TYPE int64_t + #define portUBASE_TYPE uint64_t + #define portMAX_DELAY ( TickType_t ) 0xffffffffffffffffUL + #define portPOINTER_SIZE_TYPE uint64_t +#elif __riscv_xlen == 32 + #define portSTACK_TYPE uint32_t + #define portBASE_TYPE int32_t + #define portUBASE_TYPE uint32_t + #define portMAX_DELAY ( TickType_t ) 0xffffffffUL +#else + #error Assembler did not define __riscv_xlen +#endif + + +typedef portSTACK_TYPE StackType_t; +typedef portBASE_TYPE BaseType_t; +typedef portUBASE_TYPE UBaseType_t; +typedef portUBASE_TYPE TickType_t; + +/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do +not need to be guarded with a critical section. */ +#define portTICK_TYPE_IS_ATOMIC 1 +/*-----------------------------------------------------------*/ + +/* Architecture specifics. */ +#define portSTACK_GROWTH ( -1 ) +#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ ) +#ifdef __riscv64 + #error This is the RV32 port that has not yet been adapted for 64. + #define portBYTE_ALIGNMENT 16 +#else + #define portBYTE_ALIGNMENT 8 +#endif +/*-----------------------------------------------------------*/ + + +/* Scheduler utilities. */ +extern void vTaskSwitchContext( void ); +#define portYIELD() __asm volatile( "ecall" ); +#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired ) vTaskSwitchContext() +#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x ) +/*-----------------------------------------------------------*/ + + +/* Critical section management. */ +#define portCRITICAL_NESTING_IN_TCB 1 +extern void vTaskEnterCritical( void ); +extern void vTaskExitCritical( void ); + +#define portSET_INTERRUPT_MASK_FROM_ISR() 0 +#define portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedStatusValue ) ( void ) uxSavedStatusValue +#define portDISABLE_INTERRUPTS() __disable_interrupt() +#define portENABLE_INTERRUPTS() __enable_interrupt() +#define portENTER_CRITICAL() vTaskEnterCritical() +#define portEXIT_CRITICAL() vTaskExitCritical() + +/*-----------------------------------------------------------*/ + +/* Architecture specific optimisations. */ +#if( configUSE_PORT_OPTIMISED_TASK_SELECTION == 1 ) + + #error configUSE_PORT_OPTIMISED_TASK_SELECTION cannot yet be used in the IAR RISC-V port, the CLZ instruction needs to be emulated. + +#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */ + + +/*-----------------------------------------------------------*/ + +/* Task function macros as described on the FreeRTOS.org WEB site. These are +not necessary for to use this port. They are defined so the common demo files +(which build with all the ports) will build. */ +#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters ) +#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters ) + +/*-----------------------------------------------------------*/ + +#define portNOP() __asm volatile ( " nop " ) + +#define portINLINE __inline + +#ifndef portFORCE_INLINE + #define portFORCE_INLINE inline __attribute__(( always_inline)) +#endif + +#define portMEMORY_BARRIER() __asm volatile( "" ::: "memory" ) + + +/* Suppress warnings that are generated by the IAR tools, but cannot be fixed in +the source code because to do so would cause other compilers to generate +warnings. */ +#pragma diag_suppress=Pa082 + + +#ifdef __cplusplus +} +#endif + +#endif /* PORTMACRO_H */ + diff --git a/FreeRTOS/Source/portable/IAR/RISC-V/readme.txt b/FreeRTOS/Source/portable/IAR/RISC-V/readme.txt new file mode 100644 index 000000000..69d98d924 --- /dev/null +++ b/FreeRTOS/Source/portable/IAR/RISC-V/readme.txt @@ -0,0 +1,23 @@ +/* + * The FreeRTOS kernel's RISC-V port is split between the the code that is + * common across all currently supported RISC-V chips (implementations of the + * RISC-V ISA), and code that tailors the port to a specific RISC-V chip: + * + * + FreeRTOS\Source\portable\GCC\RISC-V-RV32\portASM.S contains the code that + * is common to all currently supported RISC-V chips. There is only one + * portASM.S file because the same file is built for all RISC-V target chips. + * + * + Header files called freertos_risc_v_chip_specific_extensions.h contain the + * code that tailors the FreeRTOS kernel's RISC-V port to a specific RISC-V + * chip. There are multiple freertos_risc_v_chip_specific_extensions.h files + * as there are multiple RISC-V chip implementations. + * + * !!!NOTE!!! + * TAKE CARE TO INCLUDE THE CORRECT freertos_risc_v_chip_specific_extensions.h + * HEADER FILE FOR THE CHIP IN USE. This is done using the assembler's (not the + * compiler's!) include path. For example, if the chip in use includes a core + * local interrupter (CLINT) and does not include any chip specific register + * extensions then add the path below to the assembler's include path: + * FreeRTOS\Source\portable\GCC\RISC-V-RV32\chip_specific_extensions\RV32I_CLINT_no_extensions + * + */ -- 2.39.5