From a9479f0431d4ab8834669753124b244a9bb689a2 Mon Sep 17 00:00:00 2001 From: Afzal Mohammed Date: Wed, 18 Sep 2013 01:15:24 +0530 Subject: [PATCH] dfu: ram support DFU spec mentions it as a method to upgrade firmware (software stored in writable non-volatile memory). It also says other potential uses of DFU is beyond scope of the spec. Here such a beyond the scope use is being attempted - directly pumping binary images from host via USB to RAM. This facility is a developer centric one in that it gives advantage over upgrading non-volatile memory for testing new images every time during development and/or testing. Directly putting image onto RAM would speed up upgrade process. This and convenience was the initial thoughts that led to doing this, speed improvement over MMC was only 1 second though - 6 sec on RAM as opposed to 7 sec on MMC in beagle bone, perhaps enabling cache and/or optimizing DFU framework to avoid multiple copy for ram (if worth) may help, and on other platforms and other boot media like NAND maybe improvement would be higher. And for a platform that doesn't yet have proper DFU suppport for non-volatile media's, DFU to RAM can be used. Another minor advantage would be to increase life of mmc/nand as it would be less used during development/testing. usage: ram eg. kernel ram 0x81000000 0x1000000 Downloading images to RAM using DFU is not something new, this is acheived in openmoko also. DFU on RAM can be used for extracting RAM contents to host using dfu upload. Perhaps this can be extended to io for squeezing out register dump through usb, if it is worth. Signed-off-by: Afzal Mohammed Cc: Heiko Schocher Cc: Marek Vasut Cc: Lukasz Majewski Cc: Pantelis Antoniou Cc: Gerhard Sittig Acked-by: Marek Vasut Acked-by: Lukasz Majewski Acked-by: Heiko Schocher --- README | 6 ++++ drivers/dfu/Makefile | 1 + drivers/dfu/dfu.c | 7 ++-- drivers/dfu/dfu_ram.c | 77 +++++++++++++++++++++++++++++++++++++++++++ include/dfu.h | 18 ++++++++++ 5 files changed, 107 insertions(+), 2 deletions(-) create mode 100644 drivers/dfu/dfu_ram.c diff --git a/README b/README index 20ba650248..cab649dedd 100644 --- a/README +++ b/README @@ -1409,6 +1409,12 @@ The following options need to be configured: CONFIG_DFU_NAND This enables support for exposing NAND devices via DFU. + CONFIG_DFU_RAM + This enables support for exposing RAM via DFU. + Note: DFU spec refer to non-volatile memory usage, but + allow usages beyond the scope of spec - here RAM usage, + one that would help mostly the developer. + CONFIG_SYS_DFU_DATA_BUF_SIZE Dfu transfer uses a buffer before writing data to the raw storage device. Make the size (in bytes) of this buffer diff --git a/drivers/dfu/Makefile b/drivers/dfu/Makefile index fca370ae04..de9e44e1ef 100644 --- a/drivers/dfu/Makefile +++ b/drivers/dfu/Makefile @@ -12,6 +12,7 @@ LIB = $(obj)libdfu.o COBJS-$(CONFIG_DFU_FUNCTION) += dfu.o COBJS-$(CONFIG_DFU_MMC) += dfu_mmc.o COBJS-$(CONFIG_DFU_NAND) += dfu_nand.o +COBJS-$(CONFIG_DFU_RAM) += dfu_ram.o SRCS := $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c index 689f5dbded..56b21c78ab 100644 --- a/drivers/dfu/dfu.c +++ b/drivers/dfu/dfu.c @@ -348,6 +348,9 @@ static int dfu_fill_entity(struct dfu_entity *dfu, char *s, int alt, } else if (strcmp(interface, "nand") == 0) { if (dfu_fill_entity_nand(dfu, s)) return -1; + } else if (strcmp(interface, "ram") == 0) { + if (dfu_fill_entity_ram(dfu, s)) + return -1; } else { printf("%s: Device %s not (yet) supported!\n", __func__, interface); @@ -397,14 +400,14 @@ int dfu_config_entities(char *env, char *interface, int num) const char *dfu_get_dev_type(enum dfu_device_type t) { - const char *dev_t[] = {NULL, "eMMC", "OneNAND", "NAND" }; + const char *dev_t[] = {NULL, "eMMC", "OneNAND", "NAND", "RAM" }; return dev_t[t]; } const char *dfu_get_layout(enum dfu_layout l) { const char *dfu_layout[] = {NULL, "RAW_ADDR", "FAT", "EXT2", - "EXT3", "EXT4" }; + "EXT3", "EXT4", "RAM_ADDR" }; return dfu_layout[l]; } diff --git a/drivers/dfu/dfu_ram.c b/drivers/dfu/dfu_ram.c new file mode 100644 index 0000000000..335a8e1f24 --- /dev/null +++ b/drivers/dfu/dfu_ram.c @@ -0,0 +1,77 @@ +/* + * (C) Copyright 2013 + * Afzal Mohammed + * + * Reference: dfu_mmc.c + * Copyright (C) 2012 Samsung Electronics + * author: Lukasz Majewski + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +static int dfu_transfer_medium_ram(enum dfu_op op, struct dfu_entity *dfu, + u64 offset, void *buf, long *len) +{ + if (dfu->layout != DFU_RAM_ADDR) { + error("unsupported layout: %s\n", dfu_get_layout(dfu->layout)); + return -EINVAL; + } + + if (offset > dfu->data.ram.size) { + error("request exceeds allowed area\n"); + return -EINVAL; + } + + if (op == DFU_OP_WRITE) + memcpy(dfu->data.ram.start + offset, buf, *len); + else + memcpy(buf, dfu->data.ram.start + offset, *len); + + return 0; +} + +static int dfu_write_medium_ram(struct dfu_entity *dfu, u64 offset, + void *buf, long *len) +{ + return dfu_transfer_medium_ram(DFU_OP_WRITE, dfu, offset, buf, len); +} + +static int dfu_read_medium_ram(struct dfu_entity *dfu, u64 offset, + void *buf, long *len) +{ + if (!*len) { + *len = dfu->data.ram.size; + return 0; + } + + return dfu_transfer_medium_ram(DFU_OP_READ, dfu, offset, buf, len); +} + +int dfu_fill_entity_ram(struct dfu_entity *dfu, char *s) +{ + char *st; + + dfu->dev_type = DFU_DEV_RAM; + st = strsep(&s, " "); + if (strcmp(st, "ram")) { + error("unsupported device: %s\n", st); + return -ENODEV; + } + + dfu->layout = DFU_RAM_ADDR; + dfu->data.ram.start = (void *)simple_strtoul(s, &s, 16); + s++; + dfu->data.ram.size = simple_strtoul(s, &s, 16); + + dfu->write_medium = dfu_write_medium_ram; + dfu->read_medium = dfu_read_medium_ram; + + dfu->inited = 0; + + return 0; +} diff --git a/include/dfu.h b/include/dfu.h index 6a3e253b1d..6f4bba455b 100644 --- a/include/dfu.h +++ b/include/dfu.h @@ -19,6 +19,7 @@ enum dfu_device_type { DFU_DEV_MMC = 1, DFU_DEV_ONENAND, DFU_DEV_NAND, + DFU_DEV_RAM, }; enum dfu_layout { @@ -27,6 +28,7 @@ enum dfu_layout { DFU_FS_EXT2, DFU_FS_EXT3, DFU_FS_EXT4, + DFU_RAM_ADDR, }; enum dfu_op { @@ -56,6 +58,11 @@ struct nand_internal_data { unsigned int ubi; }; +struct ram_internal_data { + void *start; + unsigned int size; +}; + static inline unsigned int get_mmc_blk_size(int dev) { return find_mmc_device(dev)->read_bl_len; @@ -81,6 +88,7 @@ struct dfu_entity { union { struct mmc_internal_data mmc; struct nand_internal_data nand; + struct ram_internal_data ram; } data; int (*read_medium)(struct dfu_entity *dfu, @@ -143,4 +151,14 @@ static inline int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s) } #endif +#ifdef CONFIG_DFU_RAM +extern int dfu_fill_entity_ram(struct dfu_entity *dfu, char *s); +#else +static inline int dfu_fill_entity_ram(struct dfu_entity *dfu, char *s) +{ + puts("RAM support not available!\n"); + return -1; +} +#endif + #endif /* __DFU_ENTITY_H_ */ -- 2.39.5