From a9f2761083b109e6fc81068b18f39cac033492e2 Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Wed, 17 Jun 2015 20:57:34 +0200 Subject: [PATCH] tcl/target|board: add config Atheros ar2313 Add configs for Atheros ar2313 MIPS based WiSoC and board based on this chip: Netgear WP102 Change-Id: Id93957b5d5851a272f15be35f9f448a9ce6d8a08 Signed-off-by: Oleksij Rempel Reviewed-on: http://openocd.zylin.com/2835 Tested-by: jenkins Reviewed-by: Spencer Oliver --- tcl/board/netgear-wg102.cfg | 35 +++++++++++++++++++++++++++++++++++ tcl/target/atheros_ar2313.cfg | 16 ++++++++++++++++ 2 files changed, 51 insertions(+) create mode 100644 tcl/board/netgear-wg102.cfg create mode 100644 tcl/target/atheros_ar2313.cfg diff --git a/tcl/board/netgear-wg102.cfg b/tcl/board/netgear-wg102.cfg new file mode 100644 index 00000000..232d2e42 --- /dev/null +++ b/tcl/board/netgear-wg102.cfg @@ -0,0 +1,35 @@ +source [find target/atheros_ar2313.cfg] + +reset_config trst_and_srst + +$_TARGETNAME configure -event reset-init { + mips32 cp0 12 0 0x10400000 + + # configure sdram controller + mww 0xb8300004 0x0e03 + sleep 100 + mww 0xb8300004 0x0e01 + mww 0xb8300008 0x10 + sleep 500 + mww 0xb8300004 0x0e02 + + mww 0xb8300000 0x6c0088 + mww 0xb8300008 0x57e + mww 0xb8300004 0x0e00 + mww 0xb8300004 0xb00 + + # configure flash + # 0x00000001 - 0x01 << FLASHCTL_IDCY_S + # 0x000000e0 - 0x07 << FLASHCTL_WST1_S + # FLASHCTL_RBLE 0x00000400 - Read byte lane enable + # 0x00003800 - 0x07 << FLASHCTL_WST2_S + # FLASHCTL_AC_8M 0x00060000 - Size of flash + # FLASHCTL_E 0x00080000 - Flash bank enable (added) + # FLASHCTL_WP 0x04000000 - write protect. If used, CFI mode wont work!! + # FLASHCTL_MWx16 0x10000000 - 16bit mode. Do not use it!! + # FLASHCTL_MWx8 0x00000000 - 8bit mode. + mww 0xb8400000 0x000d3ce1 +} + +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME cfi 0xbe000000 0x00400000 1 1 $_TARGETNAME x16_as_x8 diff --git a/tcl/target/atheros_ar2313.cfg b/tcl/target/atheros_ar2313.cfg new file mode 100644 index 00000000..0966c6c7 --- /dev/null +++ b/tcl/target/atheros_ar2313.cfg @@ -0,0 +1,16 @@ +if { [info exists CHIPNAME] } { + set _CHIPNAME $_CHIPNAME +} else { + set _CHIPNAME ar2313 +} + +if { [info exists CPUTAPID] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x00000001 +} + +jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id $_CPUTAPID + +set _TARGETNAME $_CHIPNAME.cpu +target create $_TARGETNAME mips_m4k -endian big -chain-position $_TARGETNAME -- 2.39.5