From ad31e40bed042cb670d0036fea96435007afb838 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 22 Oct 2007 15:09:59 +0200 Subject: [PATCH] ppc4xx: Rework of 4xx serial driver (1) This patch starts the rework of the PPC4xx serial driver. First we split the file into two seperate files, one 4xx_uart.c with the 405/440 UART handling code and the other one iop480_uart.c with the UART code for the PLX-Tech IOP480 PPC (PPC403 based). Signed-off-by: Stefan Roese --- cpu/ppc4xx/{serial.c => 4xx_uart.c} | 203 ------------------------ cpu/ppc4xx/Makefile | 10 +- cpu/ppc4xx/iop480_uart.c | 238 ++++++++++++++++++++++++++++ 3 files changed, 243 insertions(+), 208 deletions(-) rename cpu/ppc4xx/{serial.c => 4xx_uart.c} (77%) create mode 100644 cpu/ppc4xx/iop480_uart.c diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/4xx_uart.c similarity index 77% rename from cpu/ppc4xx/serial.c rename to cpu/ppc4xx/4xx_uart.c index 0fdef7e64f..8560456e52 100644 --- a/cpu/ppc4xx/serial.c +++ b/cpu/ppc4xx/4xx_uart.c @@ -61,209 +61,6 @@ DECLARE_GLOBAL_DATA_PTR; -/*****************************************************************************/ -#ifdef CONFIG_IOP480 - -#define SPU_BASE 0x40000000 - -#define spu_LineStat_rc 0x00 /* Line Status Register (Read/Clear) */ -#define spu_LineStat_w 0x04 /* Line Status Register (Set) */ -#define spu_Handshk_rc 0x08 /* Handshake Status Register (Read/Clear) */ -#define spu_Handshk_w 0x0c /* Handshake Status Register (Set) */ -#define spu_BRateDivh 0x10 /* Baud rate divisor high */ -#define spu_BRateDivl 0x14 /* Baud rate divisor low */ -#define spu_CtlReg 0x18 /* Control Register */ -#define spu_RxCmd 0x1c /* Rx Command Register */ -#define spu_TxCmd 0x20 /* Tx Command Register */ -#define spu_RxBuff 0x24 /* Rx data buffer */ -#define spu_TxBuff 0x24 /* Tx data buffer */ - -/*-----------------------------------------------------------------------------+ - | Line Status Register. - +-----------------------------------------------------------------------------*/ -#define asyncLSRport1 0x40000000 -#define asyncLSRport1set 0x40000004 -#define asyncLSRDataReady 0x80 -#define asyncLSRFramingError 0x40 -#define asyncLSROverrunError 0x20 -#define asyncLSRParityError 0x10 -#define asyncLSRBreakInterrupt 0x08 -#define asyncLSRTxHoldEmpty 0x04 -#define asyncLSRTxShiftEmpty 0x02 - -/*-----------------------------------------------------------------------------+ - | Handshake Status Register. - +-----------------------------------------------------------------------------*/ -#define asyncHSRport1 0x40000008 -#define asyncHSRport1set 0x4000000c -#define asyncHSRDsr 0x80 -#define asyncLSRCts 0x40 - -/*-----------------------------------------------------------------------------+ - | Control Register. - +-----------------------------------------------------------------------------*/ -#define asyncCRport1 0x40000018 -#define asyncCRNormal 0x00 -#define asyncCRLoopback 0x40 -#define asyncCRAutoEcho 0x80 -#define asyncCRDtr 0x20 -#define asyncCRRts 0x10 -#define asyncCRWordLength7 0x00 -#define asyncCRWordLength8 0x08 -#define asyncCRParityDisable 0x00 -#define asyncCRParityEnable 0x04 -#define asyncCREvenParity 0x00 -#define asyncCROddParity 0x02 -#define asyncCRStopBitsOne 0x00 -#define asyncCRStopBitsTwo 0x01 -#define asyncCRDisableDtrRts 0x00 - -/*-----------------------------------------------------------------------------+ - | Receiver Command Register. - +-----------------------------------------------------------------------------*/ -#define asyncRCRport1 0x4000001c -#define asyncRCRDisable 0x00 -#define asyncRCREnable 0x80 -#define asyncRCRIntDisable 0x00 -#define asyncRCRIntEnabled 0x20 -#define asyncRCRDMACh2 0x40 -#define asyncRCRDMACh3 0x60 -#define asyncRCRErrorInt 0x10 -#define asyncRCRPauseEnable 0x08 - -/*-----------------------------------------------------------------------------+ - | Transmitter Command Register. - +-----------------------------------------------------------------------------*/ -#define asyncTCRport1 0x40000020 -#define asyncTCRDisable 0x00 -#define asyncTCREnable 0x80 -#define asyncTCRIntDisable 0x00 -#define asyncTCRIntEnabled 0x20 -#define asyncTCRDMACh2 0x40 -#define asyncTCRDMACh3 0x60 -#define asyncTCRTxEmpty 0x10 -#define asyncTCRErrorInt 0x08 -#define asyncTCRStopPause 0x04 -#define asyncTCRBreakGen 0x02 - -/*-----------------------------------------------------------------------------+ - | Miscellanies defines. - +-----------------------------------------------------------------------------*/ -#define asyncTxBufferport1 0x40000024 -#define asyncRxBufferport1 0x40000024 -#define asyncDLABLsbport1 0x40000014 -#define asyncDLABMsbport1 0x40000010 -#define asyncXOFFchar 0x13 -#define asyncXONchar 0x11 - -/* - * Minimal serial functions needed to use one of the SMC ports - * as serial console interface. - */ - -int serial_init (void) -{ - volatile char val; - unsigned short br_reg; - - br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1); - - /* - * Init onboard UART - */ - out8 (SPU_BASE + spu_LineStat_rc, 0x78); /* Clear all bits in Line Status Reg */ - out8 (SPU_BASE + spu_BRateDivl, (br_reg & 0x00ff)); /* Set baud rate divisor... */ - out8 (SPU_BASE + spu_BRateDivh, ((br_reg & 0xff00) >> 8)); /* ... */ - out8 (SPU_BASE + spu_CtlReg, 0x08); /* Set 8 bits, no parity and 1 stop bit */ - out8 (SPU_BASE + spu_RxCmd, 0xb0); /* Enable Rx */ - out8 (SPU_BASE + spu_TxCmd, 0x9c); /* Enable Tx */ - out8 (SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */ - val = in8 (SPU_BASE + spu_RxBuff); /* Dummy read, to clear receiver */ - - return (0); -} - -void serial_setbrg (void) -{ - unsigned short br_reg; - - br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1); - - out8 (SPU_BASE + spu_BRateDivl, (br_reg & 0x00ff)); /* Set baud rate divisor... */ - out8 (SPU_BASE + spu_BRateDivh, ((br_reg & 0xff00) >> 8)); /* ... */ -} - -void serial_putc (const char c) -{ - if (c == '\n') - serial_putc ('\r'); - - /* load status from handshake register */ - if (in8 (SPU_BASE + spu_Handshk_rc) != 00) - out8 (SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */ - - out8 (SPU_BASE + spu_TxBuff, c); /* Put char */ - - while ((in8 (SPU_BASE + spu_LineStat_rc) & 04) != 04) { - if (in8 (SPU_BASE + spu_Handshk_rc) != 00) - out8 (SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */ - } -} - -void serial_puts (const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - -int serial_getc () -{ - unsigned char status = 0; - - while (1) { - status = in8 (asyncLSRport1); - if ((status & asyncLSRDataReady) != 0x0) { - break; - } - if ((status & ( asyncLSRFramingError | - asyncLSROverrunError | - asyncLSRParityError | - asyncLSRBreakInterrupt )) != 0) { - (void) out8 (asyncLSRport1, - asyncLSRFramingError | - asyncLSROverrunError | - asyncLSRParityError | - asyncLSRBreakInterrupt ); - } - } - return (0x000000ff & (int) in8 (asyncRxBufferport1)); -} - -int serial_tstc () -{ - unsigned char status; - - status = in8 (asyncLSRport1); - if ((status & asyncLSRDataReady) != 0x0) { - return (1); - } - if ((status & ( asyncLSRFramingError | - asyncLSROverrunError | - asyncLSRParityError | - asyncLSRBreakInterrupt )) != 0) { - (void) out8 (asyncLSRport1, - asyncLSRFramingError | - asyncLSROverrunError | - asyncLSRParityError | - asyncLSRBreakInterrupt); - } - return 0; -} - -#endif /* CONFIG_IOP480 */ - -/*****************************************************************************/ #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ defined(CONFIG_405EX) || defined(CONFIG_440) diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile index bc65aa0571..194724990d 100644 --- a/cpu/ppc4xx/Makefile +++ b/cpu/ppc4xx/Makefile @@ -28,11 +28,11 @@ LIB = $(obj)lib$(CPU).a START = start.o resetvec.o kgdb.o SOBJS = dcr.o COBJS = 40x_spd_sdram.o 44x_spd_ddr.o 44x_spd_ddr2.o \ - 4xx_pci.o 4xx_pcie.o 4xx_enet.o \ - bedbug_405.o commproc.o \ - cpu.o cpu_init.o fdt.o gpio.o i2c.o interrupts.o \ - miiphy.o ndfc.o sdram.o serial.o speed.o \ - tlb.o traps.o usb_ohci.o usb.o usbdev.o + 4xx_enet.o 4xx_pci.o 4xx_pcie.o 4xx_uart.o \ + bedbug_405.o commproc.o cpu.o cpu_init.o \ + fdt.o gpio.o i2c.o interrupts.o iop480_uart.o \ + miiphy.o ndfc.o sdram.o speed.o \ + tlb.o traps.o usb.o usb_ohci.o usbdev.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/cpu/ppc4xx/iop480_uart.c b/cpu/ppc4xx/iop480_uart.c new file mode 100644 index 0000000000..8dd226729e --- /dev/null +++ b/cpu/ppc4xx/iop480_uart.c @@ -0,0 +1,238 @@ +/* + * (C) Copyright 2000-2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include "vecnum.h" + +#ifdef CONFIG_SERIAL_MULTI +#include +#endif + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_IOP480 + +#define SPU_BASE 0x40000000 + +#define spu_LineStat_rc 0x00 /* Line Status Register (Read/Clear) */ +#define spu_LineStat_w 0x04 /* Line Status Register (Set) */ +#define spu_Handshk_rc 0x08 /* Handshake Status Register (Read/Clear) */ +#define spu_Handshk_w 0x0c /* Handshake Status Register (Set) */ +#define spu_BRateDivh 0x10 /* Baud rate divisor high */ +#define spu_BRateDivl 0x14 /* Baud rate divisor low */ +#define spu_CtlReg 0x18 /* Control Register */ +#define spu_RxCmd 0x1c /* Rx Command Register */ +#define spu_TxCmd 0x20 /* Tx Command Register */ +#define spu_RxBuff 0x24 /* Rx data buffer */ +#define spu_TxBuff 0x24 /* Tx data buffer */ + +/*-----------------------------------------------------------------------------+ + | Line Status Register. + +-----------------------------------------------------------------------------*/ +#define asyncLSRport1 0x40000000 +#define asyncLSRport1set 0x40000004 +#define asyncLSRDataReady 0x80 +#define asyncLSRFramingError 0x40 +#define asyncLSROverrunError 0x20 +#define asyncLSRParityError 0x10 +#define asyncLSRBreakInterrupt 0x08 +#define asyncLSRTxHoldEmpty 0x04 +#define asyncLSRTxShiftEmpty 0x02 + +/*-----------------------------------------------------------------------------+ + | Handshake Status Register. + +-----------------------------------------------------------------------------*/ +#define asyncHSRport1 0x40000008 +#define asyncHSRport1set 0x4000000c +#define asyncHSRDsr 0x80 +#define asyncLSRCts 0x40 + +/*-----------------------------------------------------------------------------+ + | Control Register. + +-----------------------------------------------------------------------------*/ +#define asyncCRport1 0x40000018 +#define asyncCRNormal 0x00 +#define asyncCRLoopback 0x40 +#define asyncCRAutoEcho 0x80 +#define asyncCRDtr 0x20 +#define asyncCRRts 0x10 +#define asyncCRWordLength7 0x00 +#define asyncCRWordLength8 0x08 +#define asyncCRParityDisable 0x00 +#define asyncCRParityEnable 0x04 +#define asyncCREvenParity 0x00 +#define asyncCROddParity 0x02 +#define asyncCRStopBitsOne 0x00 +#define asyncCRStopBitsTwo 0x01 +#define asyncCRDisableDtrRts 0x00 + +/*-----------------------------------------------------------------------------+ + | Receiver Command Register. + +-----------------------------------------------------------------------------*/ +#define asyncRCRport1 0x4000001c +#define asyncRCRDisable 0x00 +#define asyncRCREnable 0x80 +#define asyncRCRIntDisable 0x00 +#define asyncRCRIntEnabled 0x20 +#define asyncRCRDMACh2 0x40 +#define asyncRCRDMACh3 0x60 +#define asyncRCRErrorInt 0x10 +#define asyncRCRPauseEnable 0x08 + +/*-----------------------------------------------------------------------------+ + | Transmitter Command Register. + +-----------------------------------------------------------------------------*/ +#define asyncTCRport1 0x40000020 +#define asyncTCRDisable 0x00 +#define asyncTCREnable 0x80 +#define asyncTCRIntDisable 0x00 +#define asyncTCRIntEnabled 0x20 +#define asyncTCRDMACh2 0x40 +#define asyncTCRDMACh3 0x60 +#define asyncTCRTxEmpty 0x10 +#define asyncTCRErrorInt 0x08 +#define asyncTCRStopPause 0x04 +#define asyncTCRBreakGen 0x02 + +/*-----------------------------------------------------------------------------+ + | Miscellanies defines. + +-----------------------------------------------------------------------------*/ +#define asyncTxBufferport1 0x40000024 +#define asyncRxBufferport1 0x40000024 +#define asyncDLABLsbport1 0x40000014 +#define asyncDLABMsbport1 0x40000010 +#define asyncXOFFchar 0x13 +#define asyncXONchar 0x11 + +/* + * Minimal serial functions needed to use one of the SMC ports + * as serial console interface. + */ + +int serial_init (void) +{ + volatile char val; + unsigned short br_reg; + + br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1); + + /* + * Init onboard UART + */ + out_8((u8 *)SPU_BASE + spu_LineStat_rc, 0x78); /* Clear all bits in Line Status Reg */ + out_8((u8 *)SPU_BASE + spu_BRateDivl, (br_reg & 0x00ff)); /* Set baud rate divisor... */ + out_8((u8 *)SPU_BASE + spu_BRateDivh, ((br_reg & 0xff00) >> 8)); /* ... */ + out_8((u8 *)SPU_BASE + spu_CtlReg, 0x08); /* Set 8 bits, no parity and 1 stop bit */ + out_8((u8 *)SPU_BASE + spu_RxCmd, 0xb0); /* Enable Rx */ + out_8((u8 *)SPU_BASE + spu_TxCmd, 0x9c); /* Enable Tx */ + out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */ + val = in_8((u8 *)SPU_BASE + spu_RxBuff); /* Dummy read, to clear receiver */ + + return (0); +} + +void serial_setbrg (void) +{ + unsigned short br_reg; + + br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1); + + out_8((u8 *)SPU_BASE + spu_BRateDivl, + (br_reg & 0x00ff)); /* Set baud rate divisor... */ + out_8((u8 *)SPU_BASE + spu_BRateDivh, + ((br_reg & 0xff00) >> 8)); /* ... */ +} + +void serial_putc (const char c) +{ + if (c == '\n') + serial_putc ('\r'); + + /* load status from handshake register */ + if (in_8((u8 *)SPU_BASE + spu_Handshk_rc) != 00) + out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */ + + out_8((u8 *)SPU_BASE + spu_TxBuff, c); /* Put char */ + + while ((in_8((u8 *)SPU_BASE + spu_LineStat_rc) & 04) != 04) { + if (in_8((u8 *)SPU_BASE + spu_Handshk_rc) != 00) + out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */ + } +} + +void serial_puts (const char *s) +{ + while (*s) { + serial_putc (*s++); + } +} + +int serial_getc () +{ + unsigned char status = 0; + + while (1) { + status = in_8((u8 *)asyncLSRport1); + if ((status & asyncLSRDataReady) != 0x0) { + break; + } + if ((status & ( asyncLSRFramingError | + asyncLSROverrunError | + asyncLSRParityError | + asyncLSRBreakInterrupt )) != 0) { + (void) out_8((u8 *)asyncLSRport1, + asyncLSRFramingError | + asyncLSROverrunError | + asyncLSRParityError | + asyncLSRBreakInterrupt ); + } + } + return (0x000000ff & (int) in_8((u8 *)asyncRxBufferport1)); +} + +int serial_tstc () +{ + unsigned char status; + + status = in_8((u8 *)asyncLSRport1); + if ((status & asyncLSRDataReady) != 0x0) { + return (1); + } + if ((status & ( asyncLSRFramingError | + asyncLSROverrunError | + asyncLSRParityError | + asyncLSRBreakInterrupt )) != 0) { + (void) out_8((u8 *)asyncLSRport1, + asyncLSRFramingError | + asyncLSROverrunError | + asyncLSRParityError | + asyncLSRBreakInterrupt); + } + return 0; +} + +#endif /* CONFIG_IOP480 */ -- 2.39.5