From adac376ef2fc3d44764dd32c205cb4ad03dfbe9e Mon Sep 17 00:00:00 2001 From: Date: Thu, 11 Aug 2005 10:10:30 +0200 Subject: [PATCH] O2DNT: added hardware flash protect support, macros cleanup. --- board/o2dnt/flash.c | 213 +++++++++++++++++++++++++++++++++++----- include/configs/o2dnt.h | 5 +- 2 files changed, 191 insertions(+), 27 deletions(-) diff --git a/board/o2dnt/flash.c b/board/o2dnt/flash.c index 64574f45d7..186e0d2938 100644 --- a/board/o2dnt/flash.c +++ b/board/o2dnt/flash.c @@ -2,6 +2,10 @@ * (C) Copyright 2005 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * + * flash_real_protect() routine based on boards/alaska/flash.c + * (C) Copyright 2001 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * * See file CREDITS for list of people who contributed to this * project. * @@ -23,29 +27,36 @@ #include -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ +/* Intel-compatible flash commands */ +#define INTEL_ERASE 0x20 +#define INTEL_PROGRAM 0x40 +#define INTEL_CLEAR 0x50 +#define INTEL_LOCKBIT 0x60 +#define INTEL_PROTECT 0x01 +#define INTEL_STATUS 0x70 +#define INTEL_READID 0x90 +#define INTEL_READID 0x90 +#define INTEL_SUSPEND 0xB0 +#define INTEL_CONFIRM 0xD0 +#define INTEL_RESET 0xFF + +/* Intel-compatible flash status bits */ +#define INTEL_FINISHED 0x80 +#define INTEL_OK 0x80 -/* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it - * has nothing to do with the flash chip being 8-bit or 16-bit. - */ -#ifdef CONFIG_FLASH_16BIT -typedef unsigned short FLASH_PORT_WIDTH; -typedef volatile unsigned short FLASH_PORT_WIDTHV; -#define FLASH_ID_MASK 0xFFFF -#else typedef unsigned char FLASH_PORT_WIDTH; typedef volatile unsigned char FLASH_PORT_WIDTHV; +#define FPW FLASH_PORT_WIDTH +#define FPWV FLASH_PORT_WIDTHV #define FLASH_ID_MASK 0xFF -#endif - -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV #define ORMASK(size) ((-size) & OR_AM_MSK) #define FLASH_CYCLE1 0x0555 #define FLASH_CYCLE2 0x02aa +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + /*----------------------------------------------------------------------- * Functions */ @@ -53,6 +64,8 @@ static ulong flash_get_size(FPWV *addr, flash_info_t *info); static void flash_reset(flash_info_t *info); static flash_info_t *flash_get_info(ulong base); static int write_data (flash_info_t *info, FPWV *dest, FPW data); /* O2D */ +static void flash_sync_real_protect (flash_info_t * info); +static unsigned char intel_sector_protected (flash_info_t *info, ushort sector); /*----------------------------------------------------------------------- * flash_init() @@ -79,6 +92,9 @@ unsigned long flash_init (void) flash_get_size((FPW *)CFG_FLASH_BASE, &flash_info[0]); size += flash_info[0].size; + /* get the h/w and s/w protection status in sync */ + flash_sync_real_protect(&flash_info[0]); + #if CFG_MONITOR_BASE >= CFG_FLASH_BASE /* monitor protection ON by default */ flash_protect(FLAG_PROTECT_SET, @@ -108,7 +124,7 @@ static void flash_reset(flash_info_t *info) /* Put FLASH back in read mode */ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) - *base = (FPW)0x00FF00FF; /* Intel Read Mode */ + *base = (FPW) INTEL_RESET; /* Intel Read Mode */ } /*----------------------------------------------------------------------- @@ -204,7 +220,7 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info) /* Write auto select command: read Manufacturer ID */ /* Write auto select command sequence and test FLASH answer */ - addr[FLASH_CYCLE1] = (FPW)0x00900090; /* selects Intel or AMD */ + addr[FLASH_CYCLE1] = (FPW) INTEL_READID; /* selects Intel or AMD */ /* The manufacturer codes are only 1 byte, so just use 1 byte. * This works for any bus width and any FLASH device width. @@ -298,9 +314,9 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) flag = disable_interrupts(); addr = (FPWV *)(info->start[sect]); - *addr = (FPW)0x00500050; /* clear status register */ - *addr = (FPW)0x00200020; /* erase setup */ - *addr = (FPW)0x00D000D0; /* erase confirm */ + *addr = (FPW) INTEL_CLEAR; /* clear status register */ + *addr = (FPW) INTEL_ERASE; /* erase setup */ + *addr = (FPW) INTEL_CONFIRM; /* erase confirm */ /* re-enable interrupts if necessary */ if (flag) @@ -311,10 +327,10 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) /* wait at least 80us for Intel - let's wait 1 ms */ udelay (1000); - while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) { + while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) { if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { printf ("Timeout\n"); - *addr = (FPW)0x00B000B0;/* suspend erase */ + *addr = (FPW) INTEL_SUSPEND;/* suspend erase */ flash_reset(info); /* reset to read mode */ rcode = 1; /* failed */ break; @@ -401,23 +417,172 @@ static int write_data (flash_info_t *info, FPWV *dest, FPW data) /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts (); - *addr = (FPW) 0x00400040; /* write setup */ + *addr = (FPW) INTEL_PROGRAM; /* write setup */ *addr = data; /* arm simple, non interrupt dependent timer */ start = get_timer(0); /* wait while polling the status register */ - while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { + while (((status = *addr) & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) { if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { - *addr = (FPW) 0x00FF00FF; /* restore read mode */ + *addr = (FPW) INTEL_RESET; /* restore read mode */ return (1); } } - *addr = (FPW) 0x00FF00FF; /* restore read mode */ + *addr = (FPW) INTEL_RESET; /* restore read mode */ if (flag) enable_interrupts(); return (0); } + + +/*----------------------------------------------------------------------- + * Set/Clear sector's lock bit, returns: + * 0 - OK + * 1 - Error (timeout, voltage problems, etc.) + */ +int flash_real_protect (flash_info_t * info, long sector, int prot) +{ + ulong start; + int i; + int rc = 0; + FPWV *addr = (FPWV *) (info->start[sector]); + int flag = disable_interrupts (); + + *addr = INTEL_CLEAR; /* Clear status register */ + if (prot) { /* Set sector lock bit */ + *addr = INTEL_LOCKBIT; /* Sector lock bit */ + *addr = INTEL_PROTECT; /* set */ + } else { /* Clear sector lock bit */ + *addr = INTEL_LOCKBIT; /* All sectors lock bits */ + *addr = INTEL_CONFIRM; /* clear */ + } + + start = get_timer (0); + + while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) { + if (get_timer (start) > CFG_FLASH_UNLOCK_TOUT) { + printf ("Flash lock bit operation timed out\n"); + rc = 1; + break; + } + } + + if (*addr != INTEL_OK) { + printf ("Flash lock bit operation failed at %08X, CSR=%08X\n", + (uint) addr, (uint) * addr); + rc = 1; + } + + if (!rc) + info->protect[sector] = prot; + + /* + * Clear lock bit command clears all sectors lock bits, so + * we have to restore lock bits of protected sectors. + */ + if (!prot) { + for (i = 0; i < info->sector_count; i++) { + if (info->protect[i]) { + start = get_timer (0); + addr = (FPWV *) (info->start[i]); + *addr = INTEL_LOCKBIT; /* Sector lock bit */ + *addr = INTEL_PROTECT; /* set */ + while ((*addr & INTEL_FINISHED) != + INTEL_FINISHED) { + if (get_timer (start) > + CFG_FLASH_UNLOCK_TOUT) { + printf ("Flash lock bit operation timed out\n"); + rc = 1; + break; + } + } + } + } + } + + if (flag) + enable_interrupts (); + + *addr = INTEL_RESET; /* Reset to read array mode */ + + return rc; +} + + +/* + * This function gets the u-boot flash sector protection status + * (flash_info_t.protect[]) in sync with the sector protection + * status stored in hardware. + */ +static void flash_sync_real_protect (flash_info_t * info) +{ + int i; + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_28F128J3A: + for (i = 0; i < info->sector_count; ++i) { + info->protect[i] = intel_sector_protected(info, i); + } + break; + default: + /* no h/w protect support */ + break; + } +} + + +/* + * checks if "sector" in bank "info" is protected. Should work on intel + * strata flash chips 28FxxxJ3x in 8-bit mode. + * Returns 1 if sector is protected (or timed-out while trying to read + * protection status), 0 if it is not. + */ +static unsigned char intel_sector_protected (flash_info_t *info, ushort sector) +{ + FPWV *addr; + FPWV *lock_conf_addr; + ulong start; + unsigned char ret; + + /* + * first, wait for the WSM to be finished. The rationale for + * waiting for the WSM to become idle for at most + * CFG_FLASH_ERASE_TOUT is as follows. The WSM can be busy + * because of: (1) erase, (2) program or (3) lock bit + * configuration. So we just wait for the longest timeout of + * the (1)-(3), i.e. the erase timeout. + */ + + /* wait at least 35ns (W12) before issuing Read Status Register */ + udelay(1); + addr = (FPWV *) info->start[sector]; + *addr = (FPW) INTEL_STATUS; + + start = get_timer (0); + while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) { + if (get_timer (start) > CFG_FLASH_ERASE_TOUT) { + *addr = (FPW) INTEL_RESET; /* restore read mode */ + printf("WSM busy too long, can't get prot status\n"); + return 1; + } + } + + /* issue the Read Identifier Codes command */ + *addr = (FPW) INTEL_READID; + + /* wait at least 35ns (W12) before reading */ + udelay(1); + + /* Intel example code uses offset of 4 for 8-bit flash */ + lock_conf_addr = (FPWV *) info->start[sector] + 4; + ret = (*lock_conf_addr & (FPW) INTEL_PROTECT) ? 1 : 0; + + /* put flash back in read mode */ + *addr = (FPW) INTEL_RESET; + + return ret; +} + diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h index fa15d85958..6d388f3f64 100644 --- a/include/configs/o2dnt.h +++ b/include/configs/o2dnt.h @@ -169,9 +169,8 @@ #define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ - -#undef CONFIG_FLASH_16BIT /* Flash is 8-bit */ - +#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ +#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ /* * Environment settings -- 2.39.5