From afbf88993c4ed190ed0273a5379500ff1ca56465 Mon Sep 17 00:00:00 2001 From: John Rigby Date: Tue, 19 Apr 2011 10:42:42 +0000 Subject: [PATCH] armv7: Add support for ST-Ericsson U8500 href platform Minimal platform support to boot linux from SD. Supported devices/hw limited to external MMC/SD slot, GPIO, I2C and minimal PRCMU. Signed-off-by: John Rigby CC: Albert Aribaud --- board/st-ericsson/u8500/Makefile | 50 +++ board/st-ericsson/u8500/gpio.c | 347 +++++++++++++++++ board/st-ericsson/u8500/prcmu-fw.h | 55 +++ board/st-ericsson/u8500/prcmu.c | 165 ++++++++ board/st-ericsson/u8500/u8500_href.c | 546 +++++++++++++++++++++++++++ boards.cfg | 1 + include/configs/u8500_href.h | 245 ++++++++++++ 7 files changed, 1409 insertions(+) create mode 100644 board/st-ericsson/u8500/Makefile create mode 100644 board/st-ericsson/u8500/gpio.c create mode 100644 board/st-ericsson/u8500/prcmu-fw.h create mode 100644 board/st-ericsson/u8500/prcmu.c create mode 100644 board/st-ericsson/u8500/u8500_href.c create mode 100644 include/configs/u8500_href.h diff --git a/board/st-ericsson/u8500/Makefile b/board/st-ericsson/u8500/Makefile new file mode 100644 index 0000000000..91c2abf81b --- /dev/null +++ b/board/st-ericsson/u8500/Makefile @@ -0,0 +1,50 @@ +# +# Copyright (C) ST-Ericsson SA 2009 +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +CFLAGS += -D__RELEASE -D__STN_8500 +LIB = $(obj)lib$(BOARD).o + +COBJS := u8500_href.o gpio.o prcmu.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/st-ericsson/u8500/gpio.c b/board/st-ericsson/u8500/gpio.c new file mode 100644 index 0000000000..96b2461b9c --- /dev/null +++ b/board/st-ericsson/u8500/gpio.c @@ -0,0 +1,347 @@ +/* + * Copyright (C) ST-Ericsson SA 2009 + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +static struct gpio_register *addr_gpio_register[] = { + (void *)U8500_GPIO_0_BASE, + (void *)U8500_GPIO_1_BASE, + (void *)U8500_GPIO_2_BASE, + (void *)U8500_GPIO_3_BASE, + (void *)U8500_GPIO_4_BASE, + (void *)U8500_GPIO_5_BASE, + (void *)U8500_GPIO_6_BASE, + (void *)U8500_GPIO_7_BASE, + (void *)U8500_GPIO_8_BASE, +}; + +struct gpio_altfun_data altfun_table[] = { + { + .altfun = GPIO_ALT_I2C_0, + .start = 147, + .end = 148, + .cont = 0, + .type = GPIO_ALTF_A, + }, + { + .altfun = GPIO_ALT_I2C_1, + .start = 16, + .end = 17, + .cont = 0, + .type = GPIO_ALTF_B, + }, + { + .altfun = GPIO_ALT_I2C_2, + .start = 10, + .end = 11, + .cont = 0, + .type = GPIO_ALTF_B, + }, + { + .altfun = GPIO_ALT_I2C_3, + .start = 229, + .end = 230, + .cont = 0, + .type = GPIO_ALTF_C, + }, + { + .altfun = GPIO_ALT_UART_0_MODEM, + .start = 0, + .end = 3, + .cont = 1, + .type = GPIO_ALTF_A, + }, + { + .altfun = GPIO_ALT_UART_0_MODEM, + .start = 33, + .end = 36, + .cont = 0, + .type = GPIO_ALTF_C, + }, + { + .altfun = GPIO_ALT_UART_1, + .start = 4, + .end = 7, + .cont = 0, + .type = + GPIO_ALTF_A, + }, + { + .altfun = GPIO_ALT_UART_2, + .start = 18, + .end = 19, + .cont = 1, + .type = GPIO_ALTF_B, + }, + { + .altfun = GPIO_ALT_UART_2, + .start = 29, + .end = 32, + .cont = 0, + .type = GPIO_ALTF_C, + }, + { + .altfun = GPIO_ALT_MSP_0, + .start = 12, + .end = 17, + .cont = 1, + .type = GPIO_ALTF_A, + }, + { + .altfun = GPIO_ALT_MSP_0, + .start = 21, + .end = 21, + .cont = 0, + .type = GPIO_ALTF_B, + }, + { + .altfun = GPIO_ALT_MSP_1, + .start = 33, + .end = 36, + .cont = 0, + .type = GPIO_ALTF_A, + }, + { + .altfun = GPIO_ALT_MSP_2, + .start = 192, + .end = 196, + .cont = 0, + .type = GPIO_ALTF_A, + }, + { + .altfun = GPIO_ALT_LCD_PANEL, + .start = 64, + .end = 93, + .cont = 1, + .type = GPIO_ALTF_A, + }, + { + .altfun = GPIO_ALT_LCD_PANEL, + .start = 150, + .end = 171, + .cont = 0, + .type = GPIO_ALTF_B, + }, + { + .altfun = GPIO_ALT_SD_CARD0, + .start = 18, + .end = 28, + .cont = 0, + .type = GPIO_ALTF_A, + }, + { + .altfun = GPIO_ALT_MM_CARD0, + .start = 18, + .end = 32, + .cont = 0, + .type = GPIO_ALTF_A, + }, + { + .altfun = GPIO_ALT_USB_OTG, + .start = 256, + .end = 267, + .cont = 0, + .type = GPIO_ALTF_A, + }, + { + .altfun = GPIO_ALT_EMMC, + .start = 197, + .end = 207, + .cont = 0, + .type = GPIO_ALTF_A, + }, + { + .altfun = GPIO_ALT_POP_EMMC, + .start = 128, + .end = 138, + .cont = 0, + .type = GPIO_ALTF_A, + }, +}; + +/* + * Static Function declarations + */ +enum gpio_error gpio_setpinconfig(int pin_id, struct gpio_config *config) +{ + struct gpio_register *p_gpio_register = + addr_gpio_register[GPIO_BLOCK(pin_id)]; + u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK); + enum gpio_error error = GPIO_OK; + u32 temp_reg; + + switch (config->mode) { + case GPIO_ALTF_A: + temp_reg = readl(&p_gpio_register->gpio_afsa); + temp_reg |= mask; + writel(temp_reg, &p_gpio_register->gpio_afsa); + temp_reg = readl(&p_gpio_register->gpio_afsb); + temp_reg &= ~mask; + writel(temp_reg, &p_gpio_register->gpio_afsb); + break; + case GPIO_ALTF_B: + temp_reg = readl(&p_gpio_register->gpio_afsa); + temp_reg &= ~mask; + writel(temp_reg, &p_gpio_register->gpio_afsa); + temp_reg = readl(&p_gpio_register->gpio_afsb); + temp_reg |= mask; + writel(temp_reg, &p_gpio_register->gpio_afsb); + break; + case GPIO_ALTF_C: + temp_reg = readl(&p_gpio_register->gpio_afsa); + temp_reg |= mask; + writel(temp_reg, &p_gpio_register->gpio_afsa); + temp_reg = readl(&p_gpio_register->gpio_afsb); + temp_reg |= mask; + writel(temp_reg, &p_gpio_register->gpio_afsb); + break; + case GPIO_MODE_SOFTWARE: + temp_reg = readl(&p_gpio_register->gpio_afsa); + temp_reg &= ~mask; + writel(temp_reg, &p_gpio_register->gpio_afsa); + temp_reg = readl(&p_gpio_register->gpio_afsb); + temp_reg &= ~mask; + writel(temp_reg, &p_gpio_register->gpio_afsb); + + switch (config->direction) { + case GPIO_DIR_INPUT: + writel(mask, &p_gpio_register->gpio_dirc); + break; + case GPIO_DIR_OUTPUT: + writel(mask, &p_gpio_register->gpio_dirs); + break; + case GPIO_DIR_LEAVE_UNCHANGED: + break; + default: + return GPIO_INVALID_PARAMETER; + } + + break; + case GPIO_MODE_LEAVE_UNCHANGED: + break; + default: + return GPIO_INVALID_PARAMETER; + } + return error; +} + +enum gpio_error gpio_resetgpiopin(int pin_id, char *dev_name) +{ + struct gpio_register *p_gpio_register = + addr_gpio_register[GPIO_BLOCK(pin_id)]; + u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK); + enum gpio_error error = GPIO_OK; + u32 temp_reg; + + temp_reg = readl(&p_gpio_register->gpio_afsa); + temp_reg &= ~mask; + writel(temp_reg, &p_gpio_register->gpio_afsa); + temp_reg = readl(&p_gpio_register->gpio_afsb); + temp_reg &= ~mask; + writel(temp_reg, &p_gpio_register->gpio_afsb); + writel(mask, &p_gpio_register->gpio_dirc); + + return error; +} + +struct gpio_config altfun_pinconfig; +enum gpio_error gpio_altfunction(enum gpio_alt_function alt_func, + int which_altfunc, char *dev_name) +{ + int i, j, start, end; + enum gpio_error error = -1; + + for (i = 0; i < ARRAY_SIZE(altfun_table); i++) { + if (altfun_table[i].altfun != alt_func) + continue; + + start = altfun_table[i].start; + end = altfun_table[i].end; + for (j = start; j <= end; j++) { + if (which_altfunc == GPIO_ALTF_FIND) + altfun_pinconfig.mode = altfun_table[i].type; + else + altfun_pinconfig.mode = which_altfunc; + altfun_pinconfig.direction = GPIO_DIR_OUTPUT; + altfun_pinconfig.dev_name = dev_name; + + if (which_altfunc != GPIO_ALTF_DISABLE) + error = gpio_setpinconfig(j, &altfun_pinconfig); + else + error = gpio_resetgpiopin(j, dev_name); + if (!error) + continue; + printf("GPIO %d configuration failure (nmdk_error:%d)", + j, error); + error = GPIO_INVALID_PARAMETER; + return error; + } + + if (!altfun_table[i].cont) + break; + } + return error; +} + +int gpio_writepin(int pin_id, enum gpio_data value, char *dev_name) +{ + struct gpio_register *p_gpio_register = + addr_gpio_register[GPIO_BLOCK(pin_id)]; + u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK); + + switch (value) { + case GPIO_DATA_HIGH: + writel(mask, &p_gpio_register->gpio_dats); + break; + case GPIO_DATA_LOW: + writel(mask, &p_gpio_register->gpio_datc); + break; + default: + printf("Invalid value passed in %s", __FUNCTION__); + return GPIO_INVALID_PARAMETER; + } + return GPIO_OK; +} + +int gpio_readpin(int pin_id, enum gpio_data *rv) +{ + struct gpio_register *p_gpio_register = + addr_gpio_register[GPIO_BLOCK(pin_id)]; + u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK); + + if ((readl(&p_gpio_register->gpio_dat) & mask) != 0) + *rv = GPIO_DATA_HIGH; + else + *rv = GPIO_DATA_LOW; + return GPIO_OK; +} + +int gpio_altfuncenable(enum gpio_alt_function altfunc, char *dev_name) +{ + return (int)gpio_altfunction(altfunc, GPIO_ALTF_FIND, dev_name); +} + +int gpio_altfuncdisable(enum gpio_alt_function altfunc, char *dev_name) +{ + return (int)gpio_altfunction(altfunc, GPIO_ALTF_DISABLE, dev_name); +} diff --git a/board/st-ericsson/u8500/prcmu-fw.h b/board/st-ericsson/u8500/prcmu-fw.h new file mode 100644 index 0000000000..0836983fae --- /dev/null +++ b/board/st-ericsson/u8500/prcmu-fw.h @@ -0,0 +1,55 @@ +/* + * Copyright (C) 2009 ST-Ericsson SA + * + * Copied from the Linux version: + * Author: Kumar Sanghvi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __MACH_PRCMU_FW_V1_H +#define __MACH_PRCMU_FW_V1_H + +#define AP_EXECUTE 2 +#define I2CREAD 1 +#define I2C_WR_OK 1 +#define I2C_RD_OK 2 +#define I2CWRITE 0 + +#define _PRCMU_TCDM_BASE U8500_PRCMU_TCDM_BASE +#define PRCM_XP70_CUR_PWR_STATE (_PRCMU_TCDM_BASE + 0xFFC) /* 4 BYTES */ + +#define PRCM_REQ_MB5 (_PRCMU_TCDM_BASE + 0xE44) /* 4 bytes */ +#define PRCM_ACK_MB5 (_PRCMU_TCDM_BASE + 0xDF4) /* 4 bytes */ + +/* Mailbox 5 Requests */ +#define PRCM_REQ_MB5_I2COPTYPE_REG (PRCM_REQ_MB5 + 0x0) +#define PRCM_REQ_MB5_BIT_FIELDS (PRCM_REQ_MB5 + 0x1) +#define PRCM_REQ_MB5_I2CSLAVE (PRCM_REQ_MB5 + 0x2) +#define PRCM_REQ_MB5_I2CVAL (PRCM_REQ_MB5 + 0x3) + +/* Mailbox 5 ACKs */ +#define PRCM_ACK_MB5_STATUS (PRCM_ACK_MB5 + 0x1) +#define PRCM_ACK_MB5_SLAVE (PRCM_ACK_MB5 + 0x2) +#define PRCM_ACK_MB5_VAL (PRCM_ACK_MB5 + 0x3) + +#define LOW_POWER_WAKEUP 1 +#define EXE_WAKEUP 0 + +#define REQ_MB5 5 + +extern int prcmu_i2c_read(u8 reg, u16 slave); +extern int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data); + +#endif /* __MACH_PRCMU_FW_V1_H */ diff --git a/board/st-ericsson/u8500/prcmu.c b/board/st-ericsson/u8500/prcmu.c new file mode 100644 index 0000000000..6f9302f4ab --- /dev/null +++ b/board/st-ericsson/u8500/prcmu.c @@ -0,0 +1,165 @@ +/* + * Copyright (C) 2009 ST-Ericsson SA + * + * Adapted from the Linux version: + * Author: Kumar Sanghvi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + */ + +/* + * NOTE: This currently does not support the I2C workaround access method. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "prcmu-fw.h" + +/* CPU mailbox registers */ +#define PRCM_MBOX_CPU_VAL (U8500_PRCMU_BASE + 0x0fc) +#define PRCM_MBOX_CPU_SET (U8500_PRCMU_BASE + 0x100) +#define PRCM_MBOX_CPU_CLR (U8500_PRCMU_BASE + 0x104) + +static int prcmu_is_ready(void) +{ + int ready = readb(PRCM_XP70_CUR_PWR_STATE) == AP_EXECUTE; + if (!ready) + printf("PRCMU firmware not ready\n"); + return ready; +} + +static int _wait_for_req_complete(int num) +{ + int timeout = 1000; + + /* checking any already on-going transaction */ + while ((readl(PRCM_MBOX_CPU_VAL) & (1 << num)) && timeout--) + ; + + timeout = 1000; + + /* Set an interrupt to XP70 */ + writel(1 << num, PRCM_MBOX_CPU_SET); + + while ((readl(PRCM_MBOX_CPU_VAL) & (1 << num)) && timeout--) + ; + + if (!timeout) { + printf("PRCMU operation timed out\n"); + return -1; + } + + return 0; +} + +/** + * prcmu_i2c_read - PRCMU - 4500 communication using PRCMU I2C + * @reg: - db8500 register bank to be accessed + * @slave: - db8500 register to be accessed + * Returns: ACK_MB5 value containing the status + */ +int prcmu_i2c_read(u8 reg, u16 slave) +{ + uint8_t i2c_status; + uint8_t i2c_val; + + if (!prcmu_is_ready()) + return -1; + + debug("\nprcmu_4500_i2c_read:bank=%x;reg=%x;\n", + reg, slave); + + /* prepare the data for mailbox 5 */ + writeb((reg << 1) | I2CREAD, PRCM_REQ_MB5_I2COPTYPE_REG); + writeb((1 << 3) | 0x0, PRCM_REQ_MB5_BIT_FIELDS); + writeb(slave, PRCM_REQ_MB5_I2CSLAVE); + writeb(0, PRCM_REQ_MB5_I2CVAL); + + _wait_for_req_complete(REQ_MB5); + + /* retrieve values */ + debug("ack-mb5:transfer status = %x\n", + readb(PRCM_ACK_MB5_STATUS)); + debug("ack-mb5:reg bank = %x\n", readb(PRCM_ACK_MB5) >> 1); + debug("ack-mb5:slave_add = %x\n", + readb(PRCM_ACK_MB5_SLAVE)); + debug("ack-mb5:reg_val = %d\n", readb(PRCM_ACK_MB5_VAL)); + + i2c_status = readb(PRCM_ACK_MB5_STATUS); + i2c_val = readb(PRCM_ACK_MB5_VAL); + + if (i2c_status == I2C_RD_OK) + return i2c_val; + else { + + printf("prcmu_i2c_read:read return status= %d\n", + i2c_status); + return -1; + } + +} + +/** + * prcmu_i2c_write - PRCMU-db8500 communication using PRCMU I2C + * @reg: - db8500 register bank to be accessed + * @slave: - db800 register to be written to + * @reg_data: - the data to write + * Returns: ACK_MB5 value containing the status + */ +int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data) +{ + uint8_t i2c_status; + + if (!prcmu_is_ready()) + return -1; + + debug("\nprcmu_4500_i2c_write:bank=%x;reg=%x;\n", + reg, slave); + + /* prepare the data for mailbox 5 */ + writeb((reg << 1) | I2CWRITE, PRCM_REQ_MB5_I2COPTYPE_REG); + writeb((1 << 3) | 0x0, PRCM_REQ_MB5_BIT_FIELDS); + writeb(slave, PRCM_REQ_MB5_I2CSLAVE); + writeb(reg_data, PRCM_REQ_MB5_I2CVAL); + + debug("\ncpu_is_u8500v11\n"); + _wait_for_req_complete(REQ_MB5); + + /* retrieve values */ + debug("ack-mb5:transfer status = %x\n", + readb(PRCM_ACK_MB5_STATUS)); + debug("ack-mb5:reg bank = %x\n", readb(PRCM_ACK_MB5) >> 1); + debug("ack-mb5:slave_add = %x\n", + readb(PRCM_ACK_MB5_SLAVE)); + debug("ack-mb5:reg_val = %d\n", readb(PRCM_ACK_MB5_VAL)); + + i2c_status = readb(PRCM_ACK_MB5_STATUS); + debug("\ni2c_status = %x\n", i2c_status); + if (i2c_status == I2C_WR_OK) + return 0; + else { + printf("ape-i2c: i2c_status : 0x%x\n", i2c_status); + return -1; + } +} diff --git a/board/st-ericsson/u8500/u8500_href.c b/board/st-ericsson/u8500/u8500_href.c new file mode 100644 index 0000000000..525633e865 --- /dev/null +++ b/board/st-ericsson/u8500/u8500_href.c @@ -0,0 +1,546 @@ +/* + * Copyright (C) ST-Ericsson SA 2009 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_MMC +#include "../../../drivers/mmc/arm_pl180_mmci.h" +#endif + +#define NOMADIK_PER4_BASE (0x80150000) +#define NOMADIK_BACKUPRAM0_BASE (NOMADIK_PER4_BASE + 0x00000) +#define NOMADIK_BACKUPRAM1_BASE (NOMADIK_PER4_BASE + 0x01000) + +/* Power, Reset, Clock Management Unit */ +/* + * SVA: Smart Video Accelerator + * SIA: Smart Imaging Accelerator + * SGA: Smart Graphic accelerator + * B2R2: Graphic blitter + */ +#define PRCMU_BASE CFG_PRCMU_BASE /* 0x80157000 for U8500 */ +#define PRCM_ARMCLKFIX_MGT_REG (PRCMU_BASE + 0x000) +#define PRCM_ACLK_MGT_REG (PRCMU_BASE + 0x004) +#define PRCM_SVAMMDSPCLK_MGT_REG (PRCMU_BASE + 0x008) +#define PRCM_SIAMMDSPCLK_MGT_REG (PRCMU_BASE + 0x00C) +#define PRCM_SAAMMDSPCLK_MGT_REG (PRCMU_BASE + 0x010) +#define PRCM_SGACLK_MGT_REG (PRCMU_BASE + 0x014) +#define PRCM_UARTCLK_MGT_REG (PRCMU_BASE + 0x018) +#define PRCM_MSPCLK_MGT_REG (PRCMU_BASE + 0x01C) +#define PRCM_I2CCLK_MGT_REG (PRCMU_BASE + 0x020) +#define PRCM_SDMMCCLK_MGT_REG (PRCMU_BASE + 0x024) +#define PRCM_SLIMCLK_MGT_REG (PRCMU_BASE + 0x028) +#define PRCM_PER1CLK_MGT_REG (PRCMU_BASE + 0x02C) +#define PRCM_PER2CLK_MGT_REG (PRCMU_BASE + 0x030) +#define PRCM_PER3CLK_MGT_REG (PRCMU_BASE + 0x034) +#define PRCM_PER5CLK_MGT_REG (PRCMU_BASE + 0x038) +#define PRCM_PER6CLK_MGT_REG (PRCMU_BASE + 0x03C) +#define PRCM_PER7CLK_MGT_REG (PRCMU_BASE + 0x040) +#define PRCM_DMACLK_MGT_REG (PRCMU_BASE + 0x074) +#define PRCM_B2R2CLK_MGT_REG (PRCMU_BASE + 0x078) + +#define PRCM_PLLSOC0_FREQ_REG (PRCMU_BASE + 0x080) +#define PRCM_PLLSOC1_FREQ_REG (PRCMU_BASE + 0x084) +#define PRCM_PLLARM_FREQ_REG (PRCMU_BASE + 0x088) +#define PRCM_PLLDDR_FREQ_REG (PRCMU_BASE + 0x08C) +#define PRCM_ARM_CHGCLKREQ_REG (PRCMU_BASE + 0x114) + +#define PRCM_TCR (PRCMU_BASE + 0x1C8) + +/* + * Memory controller register + */ +#define DMC_BASE_ADDR 0x80156000 +#define DMC_CTL_97 (DMC_BASE_ADDR + 0x184) + +int board_id; /* set in board_late_init() */ + +/* PLLs for clock management registers */ +enum { + GATED = 0, + PLLSOC0, /* pllsw = 001, ffs() = 1 */ + PLLSOC1, /* pllsw = 010, ffs() = 2 */ + PLLDDR, /* pllsw = 100, ffs() = 3 */ + PLLARM, +}; + +static struct pll_freq_regs { + int idx; /* index fror pll_name and pll_khz arrays */ + uint32_t addr; +} pll_freq_regs[] = { + {PLLSOC0, PRCM_PLLSOC0_FREQ_REG}, + {PLLSOC1, PRCM_PLLSOC1_FREQ_REG}, + {PLLDDR, PRCM_PLLDDR_FREQ_REG}, + {PLLARM, PRCM_PLLARM_FREQ_REG}, + {0, 0}, +}; + +static const char *pll_name[5] = {"GATED", "SOC0", "SOC1", "DDR", "ARM"}; +static uint32_t pll_khz[5]; /* use ffs(pllsw(reg)) as index for 0..3 */ + +static struct clk_mgt_regs { + uint32_t addr; + uint32_t val; + const char *descr; +} clk_mgt_regs[] = { + /* register content taken from bootrom settings */ + {PRCM_ARMCLKFIX_MGT_REG, 0x0120, "ARMCLKFIX"}, /* ena, SOC0/0, ??? */ + {PRCM_ACLK_MGT_REG, 0x0125, "ACLK"}, /* ena, SOC0/5, 160 MHz */ + {PRCM_SVAMMDSPCLK_MGT_REG, 0x1122, "SVA"}, /* ena, SOC0/2, 400 MHz */ + {PRCM_SIAMMDSPCLK_MGT_REG, 0x0022, "SIA"}, /* dis, SOC0/2, 400 MHz */ + {PRCM_SAAMMDSPCLK_MGT_REG, 0x0822, "SAA"}, /* dis, SOC0/4, 200 MHz */ + {PRCM_SGACLK_MGT_REG, 0x0024, "SGA"}, /* dis, SOC0/4, 200 MHz */ + {PRCM_UARTCLK_MGT_REG, 0x0300, "UART"}, /* ena, GATED, CLK38 */ + {PRCM_MSPCLK_MGT_REG, 0x0200, "MSP"}, /* dis, GATED, CLK38 */ + {PRCM_I2CCLK_MGT_REG, 0x0130, "I2C"}, /* ena, SOC0/16, 50 MHz */ + {PRCM_SDMMCCLK_MGT_REG, 0x0130, "SDMMC"}, /* ena, SOC0/16, 50 MHz */ + {PRCM_PER1CLK_MGT_REG, 0x126, "PER1"}, /* ena, SOC0/6, 133 MHz */ + {PRCM_PER2CLK_MGT_REG, 0x126, "PER2"}, /* ena, SOC0/6, 133 MHz */ + {PRCM_PER3CLK_MGT_REG, 0x126, "PER3"}, /* ena, SOC0/6, 133 MHz */ + {PRCM_PER5CLK_MGT_REG, 0x126, "PER5"}, /* ena, SOC0/6, 133 MHz */ + {PRCM_PER6CLK_MGT_REG, 0x126, "PER6"}, /* ena, SOC0/6, 133 MHz */ + {PRCM_PER7CLK_MGT_REG, 0x128, "PER7"}, /* ena, SOC0/8, 100 MHz */ + {PRCM_DMACLK_MGT_REG, 0x125, "DMA"}, /* ena, SOC0/5, 160 MHz */ + {PRCM_B2R2CLK_MGT_REG, 0x025, "B2R2"}, /* dis, SOC0/5, 160 MHz */ + {0, 0, NULL}, +}; + +static void init_regs(void); + +DECLARE_GLOBAL_DATA_PTR; +#if defined(CONFIG_SHOW_BOOT_PROGRESS) +void show_boot_progress(int progress) +{ + printf("Boot reached stage %d\n", progress); +} +#endif + +static unsigned int read_asicid(void) +{ + unsigned int *address = (void *)U8500_BOOTROM_BASE + + U8500_BOOTROM_ASIC_ID_OFFSET; + return readl(address); +} + +int cpu_is_u8500v11(void) +{ + return read_asicid() == 0x008500A1; +} + +/* + * Miscellaneous platform dependent initialisations + */ + +int board_early_init_f(void) +{ + init_regs(); + return 0; +} + +int board_init(void) +{ + uint32_t unused_cols_rows; + unsigned int nrows; + unsigned int ncols; + + gd->bd->bi_arch_number = 0x1A4; + gd->bd->bi_boot_params = 0x00000100; + gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; + + /* + * Assumption: 2 CS active, both CS have same layout. + * 15 rows max, 11 cols max (controller spec). + * memory chip has 8 banks, I/O width 32 bit. + * The correct way would be to read MR#8: I/O width and density, + * but this requires locking against the PRCMU firmware. + * Simplified approach: + * Read number of unused rows and columns from mem controller. + * size = nCS x 2^(rows+cols) x nbanks x buswidth_bytes + */ + unused_cols_rows = readl(DMC_CTL_97); + nrows = 15 - (unused_cols_rows & 0x07); + ncols = 11 - ((unused_cols_rows & 0x0700) >> 8); + gd->bd->bi_dram[0].size = 2 * (1 << (nrows + ncols)) * 8 * 4; + + icache_enable(); + + return 0; +} + +int dram_init(void) +{ + gd->ram_size = PHYS_SDRAM_SIZE_1; + + return 0; +} + +unsigned int addr_vall_arr[] = { + 0x8011F000, 0x0000FFFF, /* Clocks for HSI TODO: Enable reqd only */ + 0x8011F008, 0x00001CFF, /* Clocks for HSI TODO: Enable reqd only */ + 0x8000F000, 0x00007FFF, /* Clocks for I2C TODO: Enable reqd only */ + 0x8000F008, 0x00007FFF, /* Clocks for I2C TODO: Enable reqd only */ + 0x80157020, 0x00000150, /* I2C 48MHz clock */ + 0x8012F000, 0x00007FFF, /* Clocks for SD TODO: Enable reqd only */ + 0x8012F008, 0x00007FFF, /* Clocks for SD TODO: Enable reqd only */ + 0xA03DF000, 0x0000000D, /* Clock for MTU Timers */ + 0x8011E00C, 0x00000000, /* GPIO ALT FUNC for EMMC */ + 0x8011E004, 0x0000FFE0, /* GPIO ALT FUNC for EMMC */ + 0x8011E020, 0x0000FFE0, /* GPIO ALT FUNC for EMMC */ + 0x8011E024, 0x00000000, /* GPIO ALT FUNC for EMMC */ + 0x8012E000, 0x20000000, /* GPIO ALT FUNC for UART */ + 0x8012E00C, 0x00000000, /* GPIO ALT FUNC for SD */ + 0x8012E004, 0x0FFC0000, /* GPIO ALT FUNC for SD */ + 0x8012E020, 0x60000000, /* GPIO ALT FUNC for SD */ + 0x8012E024, 0x60000000, /* GPIO ALT FUNC for SD */ + 0x801571E4, 0x0000000C, /* PRCMU settings for B2R2, + PRCM_APE_RESETN_SET_REG */ + 0x80157024, 0x00000130, /* PRCMU settings for EMMC/SD */ + 0xA03FF000, 0x00000003, /* USB */ + 0xA03FF008, 0x00000001, /* USB */ + 0xA03FE00C, 0x00000000, /* USB */ + 0xA03FE020, 0x00000FFF, /* USB */ + 0xA03FE024, 0x00000000 /* USB */ +}; + +#ifdef BOARD_LATE_INIT +#ifdef CONFIG_MMC + +#define LDO_VAUX3_MASK 0x3 +#define LDO_VAUX3_ENABLE 0x1 +#define VAUX3_VOLTAGE_2_9V 0xd + +#define AB8500_REGU_CTRL2 0x4 +#define AB8500_REGU_VRF1VAUX3_REGU_REG 0x040A +#define AB8500_REGU_VRF1VAUX3_SEL_REG 0x0421 + +static int hrefplus_mmc_power_init(void) +{ + int ret; + int val; + + if (!cpu_is_u8500v11()) + return 0; + + /* + * On v1.1 HREF boards (HREF+), Vaux3 needs to be enabled for the SD + * card to work. This is done by enabling the regulators in the AB8500 + * via PRCMU I2C transactions. + * + * This code is derived from the handling of AB8500_LDO_VAUX3 in + * ab8500_ldo_enable() and ab8500_ldo_disable() in Linux. + * + * Turn off and delay is required to have it work across soft reboots. + */ + + ret = prcmu_i2c_read(AB8500_REGU_CTRL2, AB8500_REGU_VRF1VAUX3_REGU_REG); + if (ret < 0) + goto out; + + val = ret; + + /* Turn off */ + ret = prcmu_i2c_write(AB8500_REGU_CTRL2, AB8500_REGU_VRF1VAUX3_REGU_REG, + val & ~LDO_VAUX3_MASK); + if (ret < 0) + goto out; + + udelay(10 * 1000); + + /* Set the voltage to 2.9V */ + ret = prcmu_i2c_write(AB8500_REGU_CTRL2, + AB8500_REGU_VRF1VAUX3_SEL_REG, + VAUX3_VOLTAGE_2_9V); + if (ret < 0) + goto out; + + val = val & ~LDO_VAUX3_MASK; + val = val | LDO_VAUX3_ENABLE; + + /* Turn on the supply */ + ret = prcmu_i2c_write(AB8500_REGU_CTRL2, + AB8500_REGU_VRF1VAUX3_REGU_REG, val); + +out: + return ret; +} +#endif +/* + * called after all initialisation were done, but before the generic + * mmc_initialize(). + */ +int board_late_init(void) +{ + uchar byte; + + /* + * Determine and set board_id environment variable + * 0: mop500, 1: href500 + * Above boards have different GPIO expander chips which we can + * distinguish by the chip id. + * + * The board_id environment variable is needed for the Linux bootargs. + */ + (void) i2c_set_bus_num(0); + (void) i2c_read(CONFIG_SYS_I2C_GPIOE_ADDR, 0x80, 1, &byte, 1); + if (byte == 0x01) { + board_id = 0; + setenv("board_id", "0"); + } else { + board_id = 1; + setenv("board_id", "1"); + } +#ifdef CONFIG_MMC + hrefplus_mmc_power_init(); + + /* + * config extended GPIO pins for level shifter and + * SDMMC_ENABLE + */ + if (board_id == 0) { + /* MOP500 */ + byte = 0x0c; + (void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0x89, 1, &byte, 1); + (void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0x83, 1, &byte, 1); + } else { + /* HREF */ + /* set the direction of GPIO KPY9 and KPY10 */ + byte = 0x06; + (void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0xC8, 1, &byte, 1); + /* must be a multibyte access */ + (void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0xC4, 1, + (uchar []) {0x06, 0x06}, 2); + } +#endif /* CONFIG_MMC */ + /* + * Create a memargs variable which points uses either the memargs256 or + * memargs512 environment variable, depending on the memory size. + * memargs is used to build the bootargs, memargs256 and memargs512 are + * stored in the environment. + */ + if (gd->bd->bi_dram[0].size == 0x10000000) { + setenv("memargs", "setenv bootargs ${bootargs} ${memargs256}"); + setenv("mem", "256M"); + } else { + setenv("memargs", "setenv bootargs ${bootargs} ${memargs512}"); + setenv("mem", "512M"); + } + + return 0; +} +#endif /* BOARD_LATE_INIT */ + +static void early_gpio_setup(struct gpio_register *gpio_reg, u32 bits) +{ + writel(readl(&gpio_reg->gpio_dats) | bits, &gpio_reg->gpio_dats); + writel(readl(&gpio_reg->gpio_pdis) & ~bits, &gpio_reg->gpio_pdis); +} + +static void init_regs(void) +{ + /* FIXME Remove magic register array settings for ED also */ + struct prcmu *prcmu = (struct prcmu *) U8500_PRCMU_BASE; + + /* Enable timers */ + writel(1 << 17, &prcmu->tcr); + + u8500_prcmu_enable(&prcmu->per1clk_mgt); + u8500_prcmu_enable(&prcmu->per2clk_mgt); + u8500_prcmu_enable(&prcmu->per3clk_mgt); + u8500_prcmu_enable(&prcmu->per5clk_mgt); + u8500_prcmu_enable(&prcmu->per6clk_mgt); + u8500_prcmu_enable(&prcmu->per7clk_mgt); + + u8500_prcmu_enable(&prcmu->uartclk_mgt); + u8500_prcmu_enable(&prcmu->i2cclk_mgt); + + u8500_prcmu_enable(&prcmu->sdmmcclk_mgt); + + u8500_clock_enable(1, 9, -1); /* GPIO0 */ + + u8500_clock_enable(2, 11, -1); /* GPIO1 */ + + u8500_clock_enable(3, 8, -1); /* GPIO2 */ + u8500_clock_enable(5, 1, -1); /* GPIO3 */ + + u8500_clock_enable(3, 6, 6); /* UART2 */ + + gpio_altfuncenable(GPIO_ALT_I2C_0, "I2C0"); + u8500_clock_enable(3, 3, 3); /* I2C0 */ + + early_gpio_setup((struct gpio_register *)U8500_GPIO_0_BASE, 0x60000000); + gpio_altfuncenable(GPIO_ALT_UART_2, "UART2"); + + early_gpio_setup((struct gpio_register *)U8500_GPIO_6_BASE, 0x0000ffe0); + gpio_altfuncenable(GPIO_ALT_EMMC, "EMMC"); + + early_gpio_setup((struct gpio_register *)U8500_GPIO_0_BASE, 0x0000ffe0); + gpio_altfuncenable(GPIO_ALT_SD_CARD0, "SDCARD"); + + u8500_clock_enable(1, 5, 5); /* SDI0 */ + u8500_clock_enable(2, 4, 2); /* SDI4 */ + + u8500_clock_enable(6, 7, -1); /* MTU0 */ + u8500_clock_enable(3, 4, 4); /* SDI2 */ + + early_gpio_setup((struct gpio_register *)U8500_GPIO_4_BASE, 0x000007ff); + gpio_altfuncenable(GPIO_ALT_POP_EMMC, "EMMC"); + + /* + * Enabling clocks for all devices which are AMBA devices in the + * kernel. Otherwise they will not get probe()'d because the + * peripheral ID register will not be powered. + */ + + /* XXX: some of these differ between ED/V1 */ + + u8500_clock_enable(1, 1, 1); /* UART1 */ + u8500_clock_enable(1, 0, 0); /* UART0 */ + + u8500_clock_enable(3, 2, 2); /* SSP1 */ + u8500_clock_enable(3, 1, 1); /* SSP0 */ + + u8500_clock_enable(2, 8, -1); /* SPI0 */ + u8500_clock_enable(2, 5, 3); /* MSP2 */ +} + +#ifdef CONFIG_MMC +static int u8500_mmci_board_init(void) +{ + enum gpio_error error; + struct gpio_register *gpio_base_address; + + gpio_base_address = (void *)(U8500_GPIO_0_BASE); + gpio_base_address->gpio_dats |= 0xFFC0000; + gpio_base_address->gpio_pdis &= ~0xFFC0000; + + /* save the GPIO0 AFSELA register */ + error = gpio_altfuncenable(GPIO_ALT_SD_CARD0, "MMC"); + if (error != GPIO_OK) { + printf("u8500_mmci_board_init() gpio_altfuncenable failed\n"); + return -ENODEV; + } + return 0; +} + +int board_mmc_init(bd_t *bd) +{ + if (u8500_mmci_board_init()) + return -ENODEV; + + if (arm_pl180_mmci_init()) + return -ENODEV; + return 0; +} +#endif + + +/* + * get_pll_freq_khz - return PLL frequency in kHz + */ +static uint32_t get_pll_freq_khz(uint32_t inclk_khz, uint32_t freq_reg) +{ + uint32_t idf, ldf, odf, seldiv, phi; + + /* + * PLLOUTCLK = PHI = (INCLK*LDF)/(2*ODF*IDF) if SELDIV2=0 + * PLLOUTCLK = PHI = (INCLK*LDF)/(4*ODF*IDF) if SELDIV2=1 + * where: + * IDF=R(2:0) (when R=000, IDF=1d) + * LDF = 2*D(7:0) (D must be greater than or equal to 6) + * ODF = N(5:0) (when N=000000, 0DF=1d) + */ + + idf = (freq_reg & 0x70000) >> 16; + ldf = (freq_reg & 0xff) * 2; + odf = (freq_reg & 0x3f00) >> 8; + seldiv = (freq_reg & 0x01000000) >> 24; + phi = (inclk_khz * ldf) / (2 * odf * idf); + if (seldiv) + phi = phi/2; + + return phi; +} + +int do_clkinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + uint32_t inclk_khz; + uint32_t reg, phi; + uint32_t clk_khz; + unsigned int clk_sel; + struct clk_mgt_regs *clks = clk_mgt_regs; + struct pll_freq_regs *plls = pll_freq_regs; + + /* + * Go through list of PLLs. + * Initialise pll out frequency array (pll_khz) and print frequency. + */ + inclk_khz = 38400; /* 38.4 MHz */ + while (plls->addr) { + reg = readl(plls->addr); + phi = get_pll_freq_khz(inclk_khz, reg); + pll_khz[plls->idx] = phi; + printf("%s PLL out frequency: %d.%d Mhz\n", + pll_name[plls->idx], phi/1000, phi % 1000); + plls++; + } + + /* check ARM clock source */ + reg = readl(PRCM_ARM_CHGCLKREQ_REG); + printf("A9 running on %s\n", + (reg & 1) ? "external clock" : "ARM PLL"); + + /* go through list of clk_mgt_reg */ + printf("\n%19s %9s %7s %9s enabled\n", + "name(addr)", "value", "PLL", "CLK[MHz]"); + while (clks->addr) { + reg = readl(clks->addr); + + /* convert bit position into array index */ + clk_sel = ffs((reg >> 5) & 0x7); /* PLLSW[2:0] */ + + if (reg & 0x200) + clk_khz = 38400; /* CLK38 is set */ + else if ((reg & 0x1f) == 0) + /* ARMCLKFIX_MGT is 0x120, e.g. div = 0 ! */ + clk_khz = 0; + else + clk_khz = pll_khz[clk_sel] / (reg & 0x1f); + + printf("%9s(%08x): %08x, %6s, %4d.%03d, %s\n", + clks->descr, clks->addr, reg, pll_name[clk_sel], + clk_khz / 1000, clk_khz % 1000, + (reg & 0x100) ? "ena" : "dis"); + clks++; + } + + return 0; +} + +U_BOOT_CMD( + clkinfo, 1, 1, do_clkinfo, + "print clock info", + "" +); diff --git a/boards.cfg b/boards.cfg index ea5a850f14..d2cacc8c1c 100644 --- a/boards.cfg +++ b/boards.cfg @@ -154,6 +154,7 @@ s5pc210_universal arm armv7 universal_c210 samsung smdkv310 arm armv7 smdkv310 samsung s5pc2xx harmony arm armv7 harmony nvidia tegra2 seaboard arm armv7 seaboard nvidia tegra2 +u8500_href arm armv7 u8500 st-ericsson u8500 actux1 arm ixp actux2 arm ixp actux3 arm ixp diff --git a/include/configs/u8500_href.h b/include/configs/u8500_href.h new file mode 100644 index 0000000000..636922c2f9 --- /dev/null +++ b/include/configs/u8500_href.h @@ -0,0 +1,245 @@ +/* + * Copyright (C) ST-Ericsson SA 2009 + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_U8500 +#define CONFIG_L2_OFF + +#define CONFIG_SYS_MEMTEST_START 0x00000000 +#define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF +#define CONFIG_SYS_HZ 1000 /* must be 1000 */ + +#define CONFIG_BOARD_EARLY_INIT_F +#define BOARD_LATE_INIT + +/* + * Size of malloc() pool + */ +#ifdef CONFIG_BOOT_SRAM +#define CONFIG_ENV_SIZE (32*1024) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 64*1024) +#else +#define CONFIG_ENV_SIZE (128*1024) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) +#endif +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* for initial data */ + +/* + * PL011 Configuration + */ +#define CONFIG_PL011_SERIAL +#define CONFIG_PL011_SERIAL_RLCR +#define CONFIG_PL011_SERIAL_FLUSH_ON_INIT + +/* + * U8500 UART registers base for 3 serial devices + */ +#define CFG_UART0_BASE 0x80120000 +#define CFG_UART1_BASE 0x80121000 +#define CFG_UART2_BASE 0x80007000 +#define CFG_SERIAL0 CFG_UART0_BASE +#define CFG_SERIAL1 CFG_UART1_BASE +#define CFG_SERIAL2 CFG_UART2_BASE +#define CONFIG_PL011_CLOCK 38400000 +#define CONFIG_PL01x_PORTS { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1, \ + (void *)CFG_SERIAL2 } +#define CONFIG_CONS_INDEX 2 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Devices and file systems + */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_DOS_PARTITION + +/* + * Commands + */ +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_BDI +#define CONFIG_CMD_IMI +#define CONFIG_CMD_MISC +#define CONFIG_CMD_RUN +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_CONSOLE +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EMMC +#define CONFIG_CMD_SOURCE +#define CONFIG_CMD_I2C + +#ifndef CONFIG_BOOTDELAY +#define CONFIG_BOOTDELAY 1 +#endif +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ + +#undef CONFIG_BOOTARGS +#define CONFIG_BOOTCOMMAND "run emmcboot" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "verify=n\0" \ + "loadaddr=0x00100000\0" \ + "console=ttyAMA2,115200n8\0" \ + "memargs256=mem=96M@0 mem_modem=32M@96M mem=30M@128M " \ + "pmem=22M@158M pmem_hwb=44M@180M mem_mali=32@224M\0" \ + "memargs512=mem=96M@0 mem_modem=32M@96M mem=44M@128M " \ + "pmem=22M@172M mem=30M@194M mem_mali=32M@224M " \ + "pmem_hwb=54M@256M mem=202M@310M\0" \ + "commonargs=setenv bootargs cachepolicy=writealloc noinitrd " \ + "init=init " \ + "board_id=${board_id} " \ + "logo.${logo} " \ + "startup_graphics=${startup_graphics}\0" \ + "emmcargs=setenv bootargs ${bootargs} " \ + "root=/dev/mmcblk0p2 " \ + "rootdelay=1\0" \ + "addcons=setenv bootargs ${bootargs} " \ + "console=${console}\0" \ + "emmcboot=echo Booting from eMMC ...; " \ + "run commonargs emmcargs addcons memargs;" \ + "mmc read 0 ${loadaddr} 0xA0000 0x4000;" \ + "bootm ${loadaddr}\0" \ + "flash=mmc init 1;fatload mmc 1 ${loadaddr} flash.scr;" \ + "source ${loadaddr}\0" \ + "loaduimage=mmc init 1;fatload mmc 1 ${loadaddr} uImage\0" \ + "usbtty=cdc_acm\0" \ + "stdout=serial,usbtty\0" \ + "stdin=serial,usbtty\0" \ + "stderr=serial,usbtty\0" + +/* + * Miscellaneous configurable options + */ + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "U8500 $ " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */ + +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE + +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING + +#define CONFIG_SETUP_MEMORY_TAGS 2 +#define CONFIG_INITRD_TAG +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ + +/* + * I2C + */ +#define CONFIG_U8500_I2C +#undef CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 0 /* slave addr of controller */ +#define CONFIG_SYS_U8500_I2C0_BASE 0x80004000 +#define CONFIG_SYS_U8500_I2C1_BASE 0x80122000 +#define CONFIG_SYS_U8500_I2C2_BASE 0x80128000 +#define CONFIG_SYS_U8500_I2C3_BASE 0x80110000 +#define CONFIG_SYS_U8500_I2C_BUS_MAX 4 + +#define CONFIG_SYS_I2C_GPIOE_ADDR 0x42 /* GPIO expander chip addr */ +#define CONFIG_TC35892_GPIO +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ + +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 0x00000000 /* DDR-SDRAM Bank #1 */ +#define PHYS_SDRAM_SIZE_1 0x20000000 /* 512 MB */ + +/* + * additions for new relocation code + */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_SIZE 0x100000 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET + +/* landing address before relocation */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0x0 +#endif + +/* + * MMC related configs + * NB Only externa SD slot is currently supported + */ +#define MMC_BLOCK_SIZE 512 +#define CONFIG_ARM_PL180_MMCI +#define CONFIG_ARM_PL180_MMCI_BASE 0x80126000 /* MMC base for 8500 */ +#define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000 +#define CONFIG_MMC_DEV_NUM 1 + +#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV /* CMD_ENV is obsolete but used in env_emmc.c */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_OFFSET 0x13F80000 +#define CONFIG_SYS_MMC_ENV_DEV 0 /* SLOT2: eMMC */ + +/* + * FLASH and environment organization + */ +#define CONFIG_SYS_NO_FLASH + +/* + * base register values for U8500 + */ +#define CFG_PRCMU_BASE 0x80157000 /* Power, reset and clock + management unit */ +#define CFG_FSMC_BASE 0x80000000 /* FSMC Controller */ + +#endif /* __CONFIG_H */ -- 2.39.5